NDAA Compliance Security Cameras & Systems

Show previous products

• 

  UNV Uniview UNV IPC3638SE-ADF28K-WP-I1 — 8MP OwlView Plus Full-Colour Turret | 2.8mm | ColorHunter | NDAA

  NDAA Compliant · 8MP OwlView Plus Full-Colour TurretUNV 8MP Full-Colour Turret IPC3638SE-ADF28K-WP-I1 — Australian Stock & 3-Year Warranty The Uniview UNV IPC3638SE-ADF28K-WP-I1 is an 8 MP OwlView Plus (4K) turret built for true full-colour surveillance in ultra-low light across Australian homes and businesses. It pairs a large 1/1.2″ CMOS sensor and ColorHunter with Wise-ISP imaging with 130 dB true WDR, a bright fixed 2.8 mm F1.0 lens, warm white light up to 30 m, on-camera AI perimeter protection and people-flow counting, a built-in microphone with audio/alarm I/O, single-cable PoE, and a rugged IP67 · IK10 · NEMA 4X metal housing — backed locally with a 3-year Australian warranty. Why the IPC3638SE-ADF28K-WP-I1 stands out Resolution 8MP / 3840×2160 Low-Light ColorHunter + 130dB WDR Full-Colour Night Warm light to 30m Lens / View 2.8mm · 105° wide Built for Australian conditions Full colour, around the clock A large 1/1.2″ sensor, ColorHunter with Wise-ISP and an F1.0 aperture keep faces, plates and clothing in true colour day and night, with warm white light filling in when scenes go dark. Smart AI events On-camera perimeter protection — line crossing, intrusion and enter/leave area — with human, vehicle and non-motor classification cuts false alerts from trees, rain and shadows. One-cable install PoE carries power and data over a single Cat6 run to your NVR or PoE switch — no separate supply at the camera — with efficient Ultra 265 to save storage. Weatherproof & tough IP67 sealing with an IK10 vandal-resistant, NEMA 4X metal body handles Australian sun, dust and downpours, with a built-in mic and audio/alarm I/O. Technical specifications Uniview UNV IPC3638SE-ADF28K-WP-I1 — Full Specifications Brand / Series Uniview UNV · OwlView Plus Model IPC3638SE-ADF28K-WP-I1 Image Sensor 1/1.2″ progressive-scan CMOS Resolution 8 MP (4K) — 3840×2160 Lens 2.8 mm fixed @ F1.0 Field of View 105.0° (H) · 56.1° (V) · 121.0° (D) Min. Illumination 0.0003 Lux (Colour, F1.0, AGC ON) Low-Light Tech ColorHunter with Wise-ISP — 24/7 full colour Wide Dynamic Range 130 dB true WDR Supplemental Light Warm white light up to 30 m Smart Analytics Smart intrusion prevention (human/vehicle/non-motor classification), people counting, crowd density Audio & I/O Built-in microphone · two-way audio · Audio I/O 1/1 · Alarm I/O 1/1 Compression Ultra 265 / H.265 / H.264 / MJPEG · triple stream Storage MicroSD up to 512 GB · ANR · NAS Network RJ45 10/100M · ONVIF Profile S/G/T/M · RTSP / HTTPS Power PoE (IEEE 802.3af) / DC 12V Weather / Vandal IP67 · IK10 · NEMA 4X metal housing Form Factor Turret · Pan 0–360° / Tilt 0–75° / Rotate 0–360° Compliance NDAA / Section 889 compliant Warranty 3-Year Australian warranty Frequently asked questions Does it record in colour at night?Yes. A large 1/1.2″ sensor, ColorHunter with Wise-ISP and the bright F1.0 lens deliver true full-colour video around the clock, with warm white light up to 30 m filling in when scenes turn very dark. Is the IPC3638SE-ADF28K-WP-I1 NDAA compliant?Yes. Uniview UNV OwlView cameras are NDAA Section 889 compliant, suitable for government, commercial and security-sensitive sites in Australia. What resolution does it capture?Full 8 MP 4K (3840×2160) with triple-stream output and efficient Ultra 265 to keep bandwidth and storage low. What lens and coverage does it have?A fixed 2.8 mm F1.0 lens gives a wide 105° horizontal field of view — ideal for entries, car parks, yards and shopfronts. How is it powered?Single-cable PoE (IEEE 802.3af) over Cat6 to a PoE NVR or switch. A 12V DC option is also supported. Does it have a microphone?Yes — a built-in mic and two-way audio support, plus audio and alarm I/O (check local laws before recording audio). Can it record without an NVR?Yes — a MicroSD card up to 512 GB enables on-camera recording, with ANR to fill gaps if the network drops. Is it suitable outdoors?Absolutely. The IP67-rated, IK10 vandal-resistant, NEMA 4X metal body is built for permanent outdoor installation in Australian conditions. What warranty applies?This camera ships with a 3-year Australian warranty and local CCTV Guru tech support. Documentation & downloads IPC3638SE-ADF28K-WP-I1 Datasheet Uniview UNV Turret Quick Start Guide Uniview UNV Turret User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $423.78

• 

  AXIS AXIS 03385-001 — Crane and Traffic Mount

  Genuine AXIS · Crane & Traffic Mount · IK10 RatedAXIS 03385-001Rock-Solid Camera Mounting for Demanding Sites The AXIS TQ1501-E Crane and Traffic Mount reduces vibrations and adds stability to camera installations in tough environments such as cranes and traffic lights. Robust and corrosion resistant with IK10 and NEMA 4X ratings, its pivot design tilts up to 45 degrees for precise positioning. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Vibration Alleviation — dampens vibrations for steadier footage in high-movement locations. Pivot Stability — a pivot mount that tilts up to 45 degrees for more stable, precise aiming. IK10 Robustness — a tough, impact-resistant build rated to IK10 and NEMA 4X. Corrosion Resistant — coated in corrosion-resilient material for demanding outdoor sites. Specifications Model 03385-001 (AXIS TQ1501-E) Category Mount Bracket Impact Rating IK10 Environmental Rating NEMA 4X Tilt Range Up to 45 degrees Finish Corrosion-resilient coating Warranty 3 Years (AU) AXIS TQ1501-E Datasheet Frequently Asked Questions What is this mount designed for?It is built for demanding installations such as cranes and traffic lights, where it reduces vibration and adds stability. How tough is it?It is rated IK10 for impact resistance and NEMA 4X for outdoor durability, with a corrosion-resilient coating. Can the angle be adjusted?Yes, the pivot mount can be tilted up to 45 degrees for precise camera positioning. Is this a genuine AXIS product?Yes, it is a genuine AXIS mount backed by our 3-year Australian warranty and local tech support.

  Read more less

  $151.42

• 

  Ubiquiti UniFi UVC-G6-Pro-Entry 12MP AI PoE+ Smart Intercom & Access Reader

  12MP AI Smart Intercom UniFi UVC-G6-Pro-Entry 12MP AI PoE+ Smart Intercom & Access Reader The UniFi UVC-G6-Pro-Entry is Ubiquiti’s premium AI-powered door entry system, combining a high-resolution 12MP camera, 3-inch touch display, enhanced two-way audio and integrated UniFi Access reader functionality in one sleek PoE+ device. Designed for native integration with UniFi Protect and UniFi Access, the G6 Pro Entry gives Australian homes, offices, apartments and commercial sites a more professional way to manage visitors, deliveries and secure door access from the UniFi ecosystem. Built for enterprise-style deployments, this premium UniFi smart intercom is ideal for customers who want a cleaner, more reliable and more capable alternative to consumer Wi-Fi doorbells. Camera 12MP Ultra Clear Display 3-Inch Touchscreen Integration Protect + Access Power PoE+ Wired Premium UniFi Door Entry with Built-In Smart Display The G6 Pro Entry is more than a doorbell. It is a complete UniFi door entry endpoint designed for visitor communication, AI-assisted monitoring and secure access control. The built-in display gives visitors a more polished, modern interaction point while your team manages calls, unlocks and events through UniFi Access and UniFi Protect. 12MP High-Resolution Camera Capture a sharp 3024 × 4096 portrait image with a wide 176.4° diagonal field of view for premium front-door visibility. 3-Inch Touch Display A bright 480 × 854 portrait touchscreen creates a more professional visitor experience at the door. UniFi Protect + UniFi Access Manage video, events, visitor workflows and access control from the UniFi ecosystem. Enterprise-Ready PoE+ Wired PoE+ power and data provides a cleaner, more reliable installation than standard Wi-Fi doorbells. Official UniFi Product Video Watch the official Ubiquiti overview covering the next generation of UniFi doorbell and access experiences, including the G6 Pro Entry. Next-Gen UniFi Doorbell and Access Experiences — Official Ubiquiti Video Enterprise-Grade UniFi Access Integration The UniFi UVC-G6-Pro-Entry is designed for sites that need more than visitor video. When deployed with compatible UniFi Access hardware, it can operate as part of a complete access control solution for offices, apartments, reception areas, warehouses and premium residential entry points. Pair it with compatible UniFi Access hardware such as UniFi Access Hubs and the UA-Intercom-Viewer to support visitor screening, two-way audio communication, remote unlock workflows and centralised access management. Live visitor video monitoring Two-way audio communication Remote door unlocking through UniFi Access Integrated access reader functionality Touch Pass support where available UniFi mobile app notifications Compatible UniFi intercom receiver workflows Centralised management through UniFi OS Professional PoE+ wired deployment For Australian commercial buyers, the G6 Pro Entry is a strong fit for locations where visitor experience, access control and video security need to feel premium, consistent and easy to manage. AI Smart Intercom for Homes, Offices & Multi-Tenant Entry Premium Homes Upgrade your front entry with a high-end PoE+ smart intercom, 12MP video and UniFi app control. Commercial Offices Create a polished visitor experience with built-in display, two-way audio and secure access workflows. Apartments & Shared Entry Suitable for managed entry points when paired with compatible UniFi Access infrastructure. Warehouses & Staff Doors Use UniFi Access to manage authorised entry, delivery points and staff-facing access doors. Technical Specifications Model UVC-G6-Pro-Entry Product Type AI PoE+ smart intercom, video doorbell and UniFi Access reader Camera Resolution 12MP, 3024 × 4096 image size Field of View 100° horizontal, 136.3° vertical, 176.4° diagonal Display 3-inch touch display Display Resolution 480 × 854 px portrait orientation Display Brightness 1000 nits typical Audio Two-way audio Integration Native UniFi Protect and UniFi Access integration Processor Quad-core Arm Cortex-A53 based chip Buttons Ring button, factory reset button and tamper switch LEDs R/G/B/W/Amber LEDs Power Method PoE+ Operating Temperature Device: -30°C to 50°C; Display: -25°C to 50°C Operating Humidity 5% to 90% non-condensing Certifications CE, FCC, IC NDAA Compliant Yes Downloads & Resources Access official UniFi resources for setup, installation and deployment guidance. UniFi G6 Pro Entry Quick Start Guide Official UniFi Tech Specs Frequently Asked Questions What is the difference between the G6 Entry and G6 Pro Entry? The G6 Pro Entry is the premium model, adding a 12MP camera and integrated 3-inch touch display for a more advanced visitor and access control experience. Does the UVC-G6-Pro-Entry work with the UA-Intercom-Viewer? Yes. When configured within a compatible UniFi Access environment, the G6 Pro Entry can be used with UniFi intercom receiver workflows including the UA-Intercom-Viewer. Can I receive notifications on the UniFi app and an intercom monitor? Yes. With the right UniFi Access configuration, doorbell calls and visitor events can be delivered to compatible UniFi mobile apps and supported UniFi intercom receiver devices. Does the G6 Pro Entry require UniFi Protect? Yes. It is designed for native use with UniFi Protect and UniFi Access, making it best suited to customers already using or planning a UniFi ecosystem. Does it need a subscription? UniFi Protect and UniFi Access are designed for local ecosystem management, so typical local recording, access and notification workflows do not require consumer-style monthly doorbell subscriptions. Can the G6 Pro Entry unlock a door? Yes, when paired with compatible UniFi Access hardware and suitable door lock hardware, it can support remote unlock and managed access workflows. Is the G6 Pro Entry suitable for commercial sites? Yes. Its PoE+ design, UniFi Access integration, 12MP camera and built-in display make it well suited to offices, apartments, reception entries and commercial access points. What else do I need for a complete setup? A complete deployment may require a UniFi console, UniFi Protect, UniFi Access, PoE+ switching, compatible UniFi Access Hub hardware and compatible electric door lock hardware. Recommended UniFi Products UniFi Access Control UniFi Protect Cameras UniFi PoE Switches Smart Intercom Systems Australian Stock Local Expert Support Fast Australia-Wide Shipping

  Read more less

  $855.42

• 

  UNV Uniview UNV IPC3636LE-ADZK-G 6MP Motorised Varifocal Turret — 2.8–12mm Zoom | Smart IR 40m | 120dB WDR | Mic | PoE | IP67

  NDAA Compliant · 6MP Varifocal TurretUNV 6MP Motorised Turret IPC3636LE-ADZK-G 6MP Motorised Varifocal Turret — Australian Stock & 3-Year Warranty The Uniview UNV IPC3636LE-ADZK-G is a 6 MP turret IP camera with a motorised 2.8–12 mm auto-focus varifocal lens for flexible framing and fast setup. It delivers up to 3072×2048 @ 25fps, balances tough lighting with 120 dB true WDR, and uses Smart IR night vision up to 40 m for clear after-dark footage. A built-in microphone, microSD up to 256 GB, single-cable PoE and a rugged IP67 metal housing make it a dependable 24/7 choice — backed locally with a 3-year Australian warranty. Why the IPC3636LE-ADZK-G stands out Resolution 6MP / 3072×2048 Low-Light 120dB WDR + Smart IR Night Vision Smart IR to 40m Lens / View 2.8–12mm motorised Built for Australian conditions Dial in the exact view A motorised 2.8–12 mm auto-focus lens lets you zoom and frame remotely — wide for a yard or tight on a gate — without touching the camera after mounting. See detail in tricky light 120 dB true WDR, digital defog and 2D/3D DNR keep bright doorways, driveways and shaded yards balanced and clear, with Smart IR reaching 40 m at night. One-cable install PoE (IEEE 802.3af) carries power and data over a single Cat6 run to your NVR or PoE switch — no separate power supply at the camera. Weatherproof & tough IP67 sealing and a metal turret body with 6 kV surge protection handle Australian sun, dust and downpours, with a built-in mic for scene audio. Technical specifications Uniview UNV IPC3636LE-ADZK-G — Full Specifications Brand / Series Uniview UNV · EasyStar (Easy Series) Model IPC3636LE-ADZK-G Image Sensor 1/2.7″ progressive-scan CMOS Resolution 6 MP — 3072×2048 @ 25fps Lens Motorised varifocal 2.8–12 mm, auto-focus (AF) Wide Dynamic Range 120 dB true WDR Night Vision Smart IR up to 40 m (850 nm) · ICR day/night Image Enhancements 2D/3D DNR · Digital Defog · BLC/HLC Smart Analytics Cross-line & intrusion (human-based), motion, tamper, audio Audio Built-in microphone · G.711 Compression Ultra 265 / H.265 / H.264 / MJPEG Storage MicroSD up to 256 GB · ANR · NAS Network RJ45 · ONVIF S/G/T · RTSP / HTTPS · 802.1x Power PoE (IEEE 802.3af) / DC 12V · max ~8.0 W Weather / Surge IP67 · 6 kV surge · metal housing DORI (2.8–12mm) Detect 63–270 m · Recognize 12.6–54 m Operating Temp −30 °C ~ 60 °C · ≤95% RH Form Factor Turret · 3-axis adjustment · 9:16 corridor mode Compliance NDAA / Section 889 compliant Warranty 3-Year Australian warranty Frequently asked questions Does it record in colour at night?At night this model uses Smart IR for crisp black-and-white night vision up to 40 m, with 120 dB WDR keeping detail balanced. For full-colour night vision, look at the OwlView ColorHunter (-WP) range. Is the IPC3636LE-ADZK-G NDAA compliant?Yes. Uniview UNV cameras are NDAA Section 889 compliant, making them suitable for government, commercial and security-sensitive sites in Australia. What does the motorised varifocal lens do?The 2.8–12 mm auto-focus lens lets you zoom and frame remotely from the app or NVR — ideal for dialling in the exact field of view after the camera is mounted. What resolution does it record?6 MP at up to 3072×2048 @ 25fps, giving plenty of detail for identifying faces, plates and activity across wide scenes. How is it powered?Single-cable PoE (IEEE 802.3af) over Cat6 to a PoE NVR or switch. A 12V DC option is also supported. Does it have a microphone?Yes — a built-in mic captures scene audio alongside video (check local laws before recording audio). Can it record without an NVR?Yes — a MicroSD card (up to 256 GB) enables on-camera recording, with ANR to fill gaps if the network drops. Which NVRs work with it?It works with Uniview UNV NVRs via plug-and-play and with most ONVIF S/G/T-compatible recorders for video and AI events. What warranty applies?This camera ships with a 3-year Australian warranty and local CCTV Guru tech support. Documentation & downloads IPC3636LE-ADZK-G Datasheet Uniview UNV Turret Camera User Manual Uniview UNV Turret Quick Start Guide 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $195.19

• 

  VIVOTEK VIVOTEK IB9388-HT 5MP Outdoor Motorised Varifocal Bullet Camera — 2.8-12mm & 30m IR

  VIVOTEK · 5MP Motorised Bullet VIVOTEK 5MP Bullet VIVOTEK IB9388-HT 5MP Outdoor Motorised Varifocal Bullet Camera — 2.8-12mm & 30m IR IB9388-HT 5MP Motorised Varifocal Bullet — Australian Stock & 3-Year Warranty The VIVOTEK IB9388-HT is a 5-megapixel outdoor bullet camera with a motorised 2.8–12mm varifocal remote-focus lens, so you can dial in the exact field of view and zoom from your browser — no ladder, no manual refocus. Backed by 30m IR, WDR Pro and SNV low-light imaging, it delivers clear footage of car parks, driveways and perimeters day and night. A tough IP66 / IK10 housing and H.265 Smart Stream III make it a flexible, storage-efficient choice for Australian sites. Resolution 5MP · 2560×1920 Motorised Lens 2.8–12mm · 4.3x Night Vision 30m IR Protection IP66 · IK10 Why Choose the IB9388-HT Motorised 2.8–12mm Varifocal A 4.3x remote-focus lens lets you set the exact zoom and focus from the browser — frame a doorway or reach across a car park without touching the camera. 5MP Clarity at 20fps A 1/2.7" progressive CMOS sensor captures 5MP (2560×1920) at 20fps for sharp, detailed footage in the field of view you choose. 30m IR Night Vision Built-in infrared reaches up to 30 metres, keeping overnight coverage clear across driveways, yards and perimeters. WDR Pro + SNV Low-Light WDR Pro balances bright and shadowed areas in the same frame, and SNV lifts detail in dim and low-light conditions. H.265 Smart Stream III Smart Stream III with H.265 trims bandwidth and storage, so recordings last longer and networks stay light. NDAA-Compliant & ONVIF NDAA/TAA-compliant hardware with ONVIF Profile S/G/T integrates cleanly into VIVOTEK, Milestone, Genetec and most major VMS platforms. Technical Specifications Camera & Lens Image Sensor 1/2.7" progressive-scan CMOS Max Resolution 5MP — 2560 × 1920 Max Frame Rate 20 fps at 5MP Lens Motorised varifocal remote-focus, 2.8–12mm (4.3x), F1.4–2.8 fixed iris Field of View 90°–30° (H) · 65°–23° (V) Day / Night Removable IR-cut filter (ICR) Night Vision & Intelligence IR Range Up to 30m Image Enhancement WDR Pro, SNV (low-light) Compression H.265 / H.264 / MJPEG with Smart Stream III Integration ONVIF Profile S / G / T Power, Housing & Environment Power Input PoE (IEEE 802.3af) Max Power 12.95W (IR on) Local Storage microSD card slot + NAS Weatherproof IP66 Vandal Resistance IK10 Compliance NDAA / TAA compliant Warranty 3-Year Australian Warranty Best For Car Parks & Yards Zoom in to frame the exact area — wide overview or tight on an entry. Driveways & Approaches Motorised lens dials in the perfect field of view remotely. Building Perimeters IP66/IK10 build handles weather and tampering on exposed walls. Loading Docks & Gates 30m IR keeps overnight activity clear and identifiable. Power over a standard IEEE 802.3af PoE switch or injector — single-cable install (12.95W max with IR on). Mount 2.5–4m high, angled down, then set zoom and focus remotely via the browser. Use the motorised 2.8–12mm lens to frame a wide scene or reach a distant target without a site visit. Add a microSD card, or record to NAS, for edge storage and event backup. Frequently Asked Questions What resolution does the IB9388-HT capture?5MP (2560×1920) at up to 20fps from a 1/2.7" progressive CMOS sensor. Is the lens motorised?Yes — it has a motorised 2.8–12mm (4.3x) varifocal remote-focus lens, so you set zoom and focus from the browser without touching the camera. How far does the night vision reach?Up to 30 metres with built-in infrared. Does it handle bright backlight?Yes — WDR Pro balances harsh light and shadow, and SNV improves low-light detail. What power supply does it need?Standard IEEE 802.3af PoE via a single network cable, drawing up to 12.95W with IR on. Is it weatherproof and vandal-resistant?Yes — IP66 weatherproof and IK10 vandal-resistant for exposed outdoor use. Is it NDAA compliant?Yes — the IB9388-HT is NDAA/TAA compliant, making it suitable for government and enterprise projects. Which recorders and software work with it?Any ONVIF Profile S/G/T NVR or VMS, including VIVOTEK, Milestone and Genetec. Does it support onboard recording?Yes — via a microSD card or network NAS for edge storage and event backup. What warranty is included?A 3-Year Australian warranty with local support on genuine stock supplied by CCTV Guru. Downloads Spec_IB9388-HT_EN.pdf QIG_IB9388-HT_EN.pdf Manual_IB9368-HT_IB9388-HT_EN.pdf AccessoryGuide_IB9368-HT_9388-HT_9380-H_9369_9383-HV_9383-HTV.pdf 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $529.00

• Lead time: 50 days

  AXIS AXIS P1387-LE 5MP Outdoor Box Camera with Deep Learning Analytics (02736-001)

  NDAA Compliant • 5MP Box Camera AXIS 5MP BoxAXIS P1387-LE (02736-001) — Australian Stock & 5-Year Warranty The AXIS P1387-LE is a robust 5 MP outdoor box camera powered by an ARTPEC-8 chip with a deep learning processing unit (DLPU), so advanced AXIS Object Analytics run right on the edge. Lightfinder 2.0, Forensic WDR and OptimizedIR deliver true colours and crisp detail in any light, while an exchangeable i-CS lens and a -40°C to 60°C rating make it ready for the toughest sites. Resolution 5 MP (2592×1944) Analytics Deep Learning DLPU Night Range OptimizedIR 50 m Rating IP66/IP67 · IK10 Made for the great outdoors This IP66-, IP67-, IK10- and NEMA 4X-rated camera handles temperatures from -40°C to 60°C, with a front heater keeping the lens free of ice and fog. Built from aluminium and impact-resistant plastic, it stands up to vandalism and harsh weather, and electronic image stabilization keeps images steady despite vibration. PoE plus redundant DC power give flexible, resilient installation. 5 MP with Lightfinder 2.0 A 1/2.7″ progressive-scan RGB CMOS sensor delivers 5 MP (2592×1944). Lightfinder 2.0 captures true colour down to 0.1 lux, and Forensic WDR (up to 120 dB) preserves detail across bright and dark areas of the same scene. Deep Learning on the Edge The ARTPEC-8 SoC with DLPU runs AXIS Object Analytics to detect and classify humans and vehicles (including vehicle types), plus AXIS Scene Metadata for fast, efficient forensic search of live or recorded video. OptimizedIR to 50 m Built-in OptimizedIR with long-life 850 nm LEDs illuminates up to 50 m (164 ft) or more, delivering usable images at 0 lux in complete darkness. Exchangeable i-CS Lens Ships with a varifocal 2.8–13 mm F1.4 CS-mount P-Iris lens and supports i-CS for fast, tool-free lens changes and remote back focus — ideal for varied surveillance situations. Technical Specifications Imaging Image Sensor 1/2.7″ progressive scan RGB CMOS Max Resolution 2592×1944 (5 MP) Frame Rate Up to 25/30 fps with WDR; up to 50/60 fps without WDR Min Illumination 0.1 lux colour, 0.02 lux B/W; 0 lux with IR on WDR Forensic WDR up to 120 dB Day/Night Automatically removable IR-cut filter Lens & Optics Lens Varifocal 2.8–13 mm F1.4 CS-mount P-Iris (included) i-CS Support Yes (i-CS connector, P-Iris and DC-iris compatible) Horizontal FoV 112°–24° Vertical FoV 80°–18° IR Illumination OptimizedIR, 850 nm, range 50 m (164 ft) Analytics & Processing System on Chip ARTPEC-8 with DLPU (deep learning) Included Analytics AXIS Object Analytics, AXIS Scene Metadata, Image Health Analytics, Video Motion Detection Supported AXIS Perimeter Defender, License Plate Verifier, Speed Monitor (ACAP) Compression H.264, H.265 (Zipstream), Motion JPEG Audio & I/O Audio Configurable one/two-way; 3.5 mm mic/line in, speaker pairing I/O 2 supervised alarm inputs, 2 outputs; RS485/RS422 Local Storage microSD/SDHC/SDXC (AES-XTS encryption) Power, Network & Build Power over Ethernet IEEE 802.3af/802.3at Type 2 Class 4, max 25.5 W DC Power 10–28 V DC, max 25.5 W (redundant) ONVIF Profile G, M, S and T Casing IP66, IP67, NEMA 4X, IK10 Operating Temp -40°C to 60°C Part Number 02736-001 Compliance NDAA (Section 889) & TAA compliant Downloads AXIS P1387-LE DatasheetAxis Box Camera Quick Start GuideAxis Box Camera User Manual Frequently Asked Questions What resolution does the AXIS P1387-LE record?It captures 5 MP (2592×1944) using a 1/2.7″ CMOS sensor, at up to 25/30 fps with Forensic WDR or 50/60 fps without. What makes the DLPU important?The ARTPEC-8 deep learning processing unit runs AXIS Object Analytics on the edge to detect and classify humans, vehicles and vehicle types, with rich metadata for fast forensic search. Does it have built-in IR for night vision?Yes. OptimizedIR with 850 nm LEDs reaches up to 50 m (164 ft), delivering usable images at 0 lux in complete darkness. Does the camera come with a lens?Yes, it ships with a varifocal 2.8–13 mm F1.4 CS-mount P-Iris lens and supports i-CS for quick, tool-free lens swaps. Is it suitable for harsh outdoor sites?Yes. It is IP66-, IP67- and NEMA 4X-rated, IK10 vandal-resistant, and rated from -40°C to 60°C with a front heater for ice and fog. How is the camera powered?Via PoE (IEEE 802.3af/at Type 2 Class 4, max 25.5 W) or 10–28 V DC, with redundant power for resilience. Is it NDAA and TAA compliant?Yes. As an Axis camera the P1387-LE is NDAA Section 889 compliant and TAA compliant, suitable for government and enterprise deployments. Does it support ONVIF?Yes, it conforms to ONVIF Profile G, M, S and T for broad VMS interoperability. Is local recording supported?Yes, it has a microSD/SDHC/SDXC slot with AES-XTS encryption, plus recording to network-attached storage (NAS). 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $2,315.18

• 

  Bosch Bosch CM368B — Solution 6000 3G/4G + Ethernet Plug-in Module (BYO SIM)

  Genuine Bosch · 3G/4G + Ethernet · Dual-Path IPBosch CM368BCM368B Solution 6000 3G/4G + Ethernet Module — Australian Stock & 3-Year Warranty The Bosch CM368B (model DFXCM368B) is a plug-in communication module that adds 3G/4G cellular reporting and built-in Ethernet to the Bosch Solution 6000 alarm panel, giving you dual-path IP monitoring and app connectivity from a single blue PCB. With one built-in SIM socket it lets you bring your own carrier SIM (BYO SIM) for cellular reporting, while the on-board Ethernet port handles IP communication over your network. A neat, enclosure-mounted upgrade for reliable always-connected monitoring. Backed by our 3-year Australian warranty and local tech support. Cellular 3G / 4G Network Built-in Ethernet SIM BYO (1x socket) Fits Solution 6000 Dual Communication Paths Combines 3G/4G cellular and built-in Ethernet for redundant, always-connected alarm reporting. Bring Your Own SIM Single built-in SIM socket accepts a standard carrier SIM so you control your own data plan. App-Ready IP Built-in Ethernet enables IP monitoring and remote app control on your Solution 6000. Neat Plug-in Install Enclosure-mounted blue PCB plugs straight into the panel for a tidy, serviceable upgrade. Technical Specifications Model / SKU Bosch CM368B (DFXCM368B) Type Plug-in 3G/4G + Ethernet communication module Cellular 3G / 4G (BYO SIM) Network Built-in Ethernet SIM 1x built-in SIM socket Mounting Enclosure-mounted PCB Compatible Panels Solution 6000 Warranty 3 Years (Australia) Downloads CM368B DatasheetBosch Communication Module Quick Start GuideBosch CM368B Installer Manual Frequently Asked Questions Which panel does the CM368B fit?It is a plug-in module for the Bosch Solution 6000 alarm panel. Do I need to supply a SIM card?Yes. The CM368B is BYO SIM — fit your own carrier SIM into the built-in socket for cellular reporting. Does it also provide Ethernet?Yes. It has built-in Ethernet as well as 3G/4G cellular, so you can run dual-path IP and cellular monitoring. What's the difference between the CM368B and MY368AU?They are the same module family; the CM368B is BYO SIM while the MY368AU ships for use with a MyAlarm SIM subscription. How does it mount?The blue PCB plugs into the Solution 6000 and mounts inside the panel enclosure. What's in the box?The CM368B module PCB. A SIM card is not included — you supply your own. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $459.00

• Save $8.01

  Ubiquiti Ubiquiti UVC-G4 Doorbell Pro PoE Kit — UniFi Protect Dual-Camera Video Doorbell with PoE Chime

  UniFi Protect — NDAA Compliant Ubiquiti UVC-G4 Doorbell Pro PoE Kit — UniFi Protect Dual-Camera Video Doorbell with PoE Chime The UniFi Protect G4 Doorbell Pro PoE Kit is Ubiquiti's premium PoE video doorbell — pairing a wide-angle main camera with a dedicated secondary package-detection camera, a programmable display, two-way audio, and an included PoE Chime for plug-and-play installation. With improved HDR and low-light performance, on-device AI event detection, and full UniFi Protect integration over a single PoE cable, it secures any front door, office, or retail entry across Australia with no monthly fees. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Cameras Dual 2MP FHD Night Vision IR 6 m Protection IPX4 Power Single-Cable PoE Why Choose the G4 Doorbell Pro PoE Kit? Dual-Camera Design A wide 2MP main camera covers visitors face-to-face, while a dedicated 2MP secondary package-detection camera watches the doorstep below — so deliveries are never out of frame. AI Event Detection On-device AI detects people, vehicles, and animals in real time, cutting nuisance alerts so you only get notified about what actually matters at your door. Programmable Welcome Display An integrated colour display greets visitors with custom messages, while improved HDR and low-light performance keeps faces clear day and night. Two-Way Audio & Intercom Built-in two-way audio lets you speak with visitors from the UniFi Protect app, with full two-way intercom and doorbell access support across your UniFi system. Included PoE Chime The kit ships with a PoE Chime featuring an R/G/B/W LED, speaker, and buzzer — plug it into any PoE port for an instant in-home doorbell tone, no wiring rework required. NFC Card & Keyfob Access Integrated NFC support enables card and keyfob tap access, bringing simple door entry alongside live video right at the doorbell. Single-Cable PoE Installation One Ethernet cable delivers power and data (max 7 W) — no separate power run and no transformer. Works with any standard PoE switch or UniFi PoE switch. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and chimes through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action G4 Doorbell Pro PoE Kit — installation walkthrough Technical Specifications Model UVC-G4 Doorbell Pro PoE Kit Resolution Main & package cameras: 2MP FHD — 1600 × 1200 (4:3) @ 30 FPS Image Sensors Main: 5MP CMOS • Package: 8MP CMOS Lens Fixed focal length Field of View Main: H 138° / V 114° / D 155° (LDC On) • Package: H 97.5° / V 79.4° / D 118.2° Night Vision Built-in IR LED illumination + IR cut filter, up to 6 m (20 ft) AI / Smart Detection People, vehicles, animals Audio Two-way audio Access Control NFC card & keyfob access • two-way intercom & doorbell access Weatherproof Rating IPX4 Network Interface GbE RJ45 port Power Method PoE • 37–57 V DC • max 7 W Processor Quad-core Arm® Cortex®-A53 Mounting Wall, wedge (included); gang box, junction box (optional) Enclosure Polycarbonate & aluminium alloy Dimensions / Weight 160.6 × 51.7 × 35.1 mm • 264 g Operating Temperature −30°C to 40°C, 0–90% non-condensing PoE Chime 10/100 MbE PoE • max 3 W • R/G/B/W LED, speaker & buzzer • ⌀62 × 54 mm Certifications CE, FCC, IC, SRRC Compliance NDAA compliant Downloads & Resources UVC-G4 Doorbell Pro Datasheet Ubiquiti Installation Guide What's in the Box G4 Doorbell Pro The dual-camera PoE video doorbell with integrated display. PoE Chime In-home PoE chime with R/G/B/W LED, speaker, and buzzer. Mounting Hardware Flat wall mount and 20° wedge mount included; gang/junction box adapters optional. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Front Doors See visitors face-to-face and keep an eye on doorstep deliveries with the second package camera. Retail & Reception Two-way intercom and a programmable welcome display greet customers and staff at the entrance. Offices & Buildings NFC card and keyfob access pairs door entry with live video, all inside UniFi Protect. Apartments & Villas Single-cable PoE install with a tidy included chime — no transformer or doorbell wiring rework. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any standard PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to wall or 20° wedge out of the box; gang-box and junction-box adapters available separately. Included PoE Chime plugs into any PoE port for an in-home doorbell tone. Frequently Asked Questions Does the G4 Doorbell Pro require a subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run it? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the doorbell and chime. What is the second camera for? The secondary package-detection camera points down at the doorstep so parcels and deliveries stay in frame, even when they are below the main camera's view. Is the PoE Chime included? Yes. This kit includes the PoE Chime, which provides an in-home doorbell tone with an R/G/B/W status LED, speaker, and buzzer. Is it suitable for outdoor use in Australia? Yes, when mounted in a covered location. It carries an IPX4 rating and a −30°C to 40°C operating range suited to Australian conditions. Is the G4 Doorbell Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell Pro PoE Kit is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $799.00 $790.99

• Save $105.01

  Ubiquiti Ubiquiti UniFi U7 Outdoor WiFi 7 Access Point (U7-Outdoor)

  UniFi WiFi 7 — NDAA Compliant Ubiquiti UniFi U7 Outdoor WiFi 7 Access Point (U7-Outdoor) The UniFi U7 Outdoor is Ubiquiti’s all-weather WiFi 7 access point, purpose-built to blanket outdoor spaces with fast, high-density wireless coverage. It pairs 4 spatial streams with an integrated directional super antenna and two external omni antennas, delivering up to 465 m² (5,000 ft²) of coverage for 250+ concurrent clients. A single 2.5 GbE PoE+ cable carries power and data, and the IPX6-rated enclosure handles tough Australian conditions from −30°C to 60°C. Genuine Ubiquiti stock with fast Australia-wide shipping. Standard WiFi 7 Coverage 465 m² Weatherproof IPX6 Power 2.5GbE PoE+ Why Choose the UniFi U7 Outdoor? WiFi 7 Performance Built on the 802.11be (WiFi 7) standard with 4 spatial streams, the U7 Outdoor reaches up to 4.3 Gbps on 5 GHz and 688 Mbps on 2.4 GHz for high-throughput, low-latency outdoor connectivity. Integrated Super Antenna A built-in directional super antenna (12.5 dBi on 5 GHz) plus two external omni antennas focuses signal where you need it, ideal for long-range and high-density outdoor coverage. 465 m² Coverage, 250+ Clients Cover up to 465 m² (5,000 ft²) and support 250+ concurrent client devices, perfect for stadiums, campuses, car parks, and busy public venues. 2.5 GbE PoE+ Single Cable A single 2.5 GbE PoE+ uplink (max 19 W) delivers both power and data, removing the WiFi 7 throughput bottleneck and simplifying installation. All-Weather IPX6 Build A UV-stabilised polycarbonate and aluminium-alloy enclosure sealed to IPX6 withstands rain and dust across a wide −30°C to 60°C range, with 200 km/h wind loading. UniFi Network — No Subscription Managed through the UniFi Network application with mesh, band steering, fast roaming, and captive portals — full local control with no monthly fees. Versatile Mounting Includes wall and pole mounts out of the box (pole diameter 25–60 mm), so you can position it for the best outdoor coverage angle. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model U7-Outdoor WiFi Standard WiFi 7 (802.11a/b/g/n/ac/ax/be) Spatial Streams 4 Bands 2.4 GHz & 5 GHz (2 x 2 MU-MIMO each) Max. Data Rate 5 GHz: 4.3 Gbps (BW240) • 2.4 GHz: 688 Mbps (BW40) Coverage Area 465 m² (5,000 ft²) Max. Client Count 250+ Antennas (1) directional internal super antenna • (2) external omni • (2) RP-SMA connectors Antenna Gain 5 GHz internal 12.5 dBi • 2.4 GHz internal 8 dBi Uplink / Interface (1) 1/2.5 GbE RJ45 port Power Method PoE+ • 42.5–57 V DC • max 19 W Weatherproof Rating IPX6 Mounting Wall & pole (included) • pole diameter 25–60 mm Wind Loading 74.6 N at 200 km/h Enclosure UV-stabilised polycarbonate, aluminium alloy Dimensions / Weight 170 × 208 × 54.5 mm • 1.2 kg Operating Temperature −30°C to 60°C, 5–95% non-condensing Management UniFi Network 8.2.93 and later Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources U7-Outdoor Datasheet Ubiquiti Installation Guide What's in the Box UniFi U7 Outdoor Access Point WiFi 7 outdoor AP (U7-Outdoor) with integrated directional super antenna. External Omni Antennas Two external omni antennas for extended omnidirectional coverage. Mounting Hardware Wall and pole mounting kit with screws and hardware included. Not Included A 2.5 GbE PoE+ switch or injector and network cable are required and sold separately. Best For Stadiums & Venues High-density WiFi 7 for crowds, with 250+ client capacity and fast roaming. Campuses & Estates Long-range outdoor coverage across grounds, courtyards, and walkways. Car Parks & Yards Directional super antenna focuses signal across open outdoor areas. Industrial Sites IPX6 build and −30°C to 60°C range for demanding environments. Requires a UniFi Network host (Cloud Gateway, Dream Machine, or Cloud Key) running UniFi Network 8.2.93 or later. Powered by a 2.5 GbE PoE+ switch or injector to unlock full WiFi 7 throughput. Mounts to wall or pole out of the box; pole diameter 25–60 mm. RP-SMA connectors allow the external omni antennas to be positioned for best coverage. Frequently Asked Questions Does the U7 Outdoor need a UniFi controller? Yes. It is managed by the UniFi Network application running on a Cloud Gateway, Dream Machine, or Cloud Key — no monthly subscription required. What PoE does it require? It is powered by PoE+ over a 2.5 GbE port, drawing up to 19 W. A 2.5 GbE PoE+ switch or injector is recommended to avoid throttling WiFi 7 throughput. Is it suitable for outdoor use in Australia? Yes. IPX6 weatherproofing, a −30°C to 60°C range, and 200 km/h wind loading suit Australian outdoor environments including coastal and high-UV sites. How much area does it cover? Up to 465 m² (5,000 ft²) with support for 250+ concurrent client devices, depending on environment and placement. Does it support WiFi 7 6 GHz? The U7 Outdoor is a WiFi 7 dual-band AP operating on 2.4 GHz and 5 GHz with 4 spatial streams and a peak 5 GHz rate of 4.3 Gbps. Is the U7 Outdoor NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the U7 Outdoor is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $501.00 $395.99

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 8M White — All-Weather Cat 5e Shielded RJ45 (UACC-Cable-Patch-Outdoor-8M-W)

  UniFi Outdoor Patch Cable — NDAA Compliant UniFi Patch Cable Outdoor 8M White — All-Weather Cat 5e Shielded RJ45 (UACC-Cable-Patch-Outdoor-8M-W) The UniFi Patch Cable Outdoor 8M is a rugged, all-weather Category 5e patch cable built for outdoor UniFi deployments that demand extra protection from the elements. A shielded RJ45 plug, internal foil shielding, and a built-in ESD drain wire are sealed inside a weatherproof thermoplastic elastomer (TPE) jacket, with 24 AWG stranded copper conductors for reliable connections in the harshest conditions. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather TPE Jacket A weatherproof, insulating thermoplastic elastomer jacket offers extreme protection against rain, UV, and temperature swings for exposed outdoor runs. Shielded & ESD-Protected Internal foil shielding plus a built-in ESD drain wire and a shielded RJ45 plug guard against interference and electrostatic discharge. 24 AWG Stranded Copper Pure stranded copper conductors deliver dependable PoE and data performance across the full 8-metre length. Model UACC-Cable-Patch-Outdoor-8M-W Cable Length 8 m (26.25 ft) Cable Type Category 5e Cable Colour White Shielding Type STP (internal foil shielding + ESD drain wire) Connector Shielded RJ45 plug Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm (0.24″) Bend Radius Min. 24 mm (0.94″) Flame Rating VW-1 (UL1581) Weight 315 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $32.36

• 

  Ubiquiti Ubiquiti NanoStation 5AC Loco — 5 GHz airMAX ac Outdoor CPE / PtP Bridge (Loco5AC)

  airMAX ac CPE — NDAA Compliant Ubiquiti NanoStation 5AC Loco — 5 GHz airMAX ac Outdoor CPE / PtP Bridge (Loco5AC) The Ubiquiti NanoStation 5AC Loco (Loco5AC) is a compact 5 GHz airMAX® ac outdoor CPE built for point-to-point bridges and point-to-multipoint client links. Its 13 dBi integrated antenna, dedicated 2.4 GHz management radio, and U-Mobile app setup make it a fast, low-cost way to extend a network across a property, between buildings, or out to a remote site. Fully NDAA compliant and backed by genuine Ubiquiti stock with fast Australia-wide shipping. Note: a 24V PoE injector is not included. airMAX ac Performance Proprietary airMAX® ac chipset with TDMA scheduling delivers high throughput and low latency for reliable long-distance wireless links across Australia. 13 dBi Integrated Antenna A built-in dual-linear 13 dBi antenna with 45° beamwidth focuses signal for a clean, directional link in a small, easy-to-mount enclosure. Management Wi-Fi & U-Mobile App A dedicated 2.4 GHz management radio lets you configure and aim the unit from your phone via the U-Mobile app and the airOS® 8 web interface. NDAA Compliant NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model Loco5AC (airMAX NanoStation 5AC Loco) Operating Frequency 5150–5875 MHz (worldwide) Management Radio 2.4 GHz (2412–2472 MHz) Antenna Gain 13 dBi, dual-linear polarisation Beamwidth 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Channel Bandwidths 10 / 20 / 30 / 40 / 50 / 60 / 80 MHz Cross-Pol Isolation 20 dB min. Max. VSWR 1.8:1 Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24V, 0.3A gigabit PoE (not included) Supported Voltage Range 22–27 V DC Max. Power Consumption 7 W LEDs Power, Ethernet, (4) signal strength Dimensions 179 × 77.5 × 59.1 mm Weight 180 g Enclosure UV-stabilised plastic Mounting Pole mounting kit (included) Operating Temperature −40°C to 70°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources Loco5AC Datasheet Loco5AC Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $119.00

• 

  Ubiquiti Tycon Power TP-DCDC-1248G DC-to-DC PoE Converter — 9-36V DC In, 48V PoE Out, Gigabit 24W

  Gigabit DC-to-DC PoE Converter Tycon Power TP-DCDC-1248G — 9–36V DC In, 48V PoE Out, Gigabit DC-to-DC Converter The Tycon Power TP-DCDC-1248G is a rugged DC-to-DC PoE converter that takes a wide 9–36V DC input and steps it up to a regulated 48V passive PoE output, delivering up to 24 W to a single device over Gigabit (1000 Mbps) Ethernet. It is the go-to solution for powering 48V PoE access points, cameras, and radios from 12V or 24V battery, solar, and vehicle systems where mains power isn’t available. Compact, efficient, and reliable for off-grid and mobile deployments — available now with genuine stock and fast Australia-wide shipping. Wide 9–36V DC Input Accepts any 12V or 24V DC source — battery banks, solar charge controllers, and vehicle power — making it ideal for off-grid and mobile installs across Australia. Regulated 48V PoE Output Steps voltage up to a stable 48V passive PoE output to power 48V access points, CCTV cameras, and wireless radios over a single Ethernet run. Gigabit Data Passthrough Full 10/100/1000 Mbps Gigabit Ethernet passthrough means no bottleneck for high-throughput APs and IP cameras. 24 W of Reliable Power Supplies up to 24 W of clean, regulated PoE — enough headroom for the vast majority of single PoE devices. Technical Specifications Model TP-DCDC-1248G Converter Type DC-to-DC PoE converter / injector Input Voltage 9–36V DC Output Voltage 48V DC passive PoE Output Power Up to 24 W Data Rate 10/100/1000 Mbps (Gigabit) passthrough Application Powering 48V PoE APs, cameras & radios from 12V/24V DC, solar, battery & vehicle systems Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $108.00

• 

  Ubiquiti Ubiquiti NanoStation Loco M5 (LOCOM5) — 5GHz Outdoor CPE, 13dBi MIMO, 10+ km, PoE Included

  Ubiquiti LOCOM5 · 5GHz airMAX CPE · 13dBi MIMO · 10+ km Ubiquiti NanoStation Loco M5 (LOCOM5) — 5GHz Outdoor CPE for Long-Range Wireless Links ⚠️ Single unit — not a pair. A point-to-point (P2P) wireless bridge needs two units, one at each end. Add 2 to cart for a complete P2P link. The Ubiquiti NanoStation Loco M5 (LOCOM5) is one of the most widely deployed outdoor CPEs in Australia. It delivers up to 150 Mbps real throughput, an integrated 13dBi dual-polarisation MIMO antenna, and 10+ km line-of-sight range from a compact, weatherproof housing. Bridge two buildings, extend a network to a remote shed, backhaul a CCTV camera to its recorder, or build a WISP CPE — all on the less-congested 5GHz band using Ubiquiti's airMAX TDMA protocol. PoE adapter included, genuine Ubiquiti stock, and fast Australia-wide shipping. Frequency 5GHz · 802.11a/n Antenna Gain 13dBi MIMO Range 10+ km Throughput Up to 150Mbps Protocol airMAX TDMA Power PoE Included Why Choose the NanoStation Loco M5? 5GHz Band — Less Interference, More Throughput Operating on the 5GHz band — far less congested than 2.4GHz in most Australian environments — the LocoM5 is ideal for high-throughput tasks like CCTV video, VoIP, and data backhaul where neighbouring Wi-Fi would degrade a 2.4GHz link. 13dBi Integrated MIMO Antenna — 10+ km Range The integrated 13dBi dual-polarisation MIMO antenna delivers focused signal for point-to-point links up to 10+ km in line-of-sight conditions. No external antenna required — it's a complete, self-contained unit. airMAX TDMA — Low Latency, High Efficiency Ubiquiti's proprietary airMAX TDMA protocol schedules transmissions to eliminate hidden-node interference and reduce latency — even when multiple units share the same frequency. Essential for WISP and multi-client deployments. Up to 150Mbps Real Throughput Delivers up to 150Mbps of real-world throughput — ample for HD CCTV streams, VoIP, and general backhaul across a wireless bridge. Actual figures depend on distance, line of sight, and RF environment. airOS Web Management Configured via the airOS web interface from any browser — supports station, access point, bridge, and router modes. Manage multiple units centrally with airControl. No proprietary software needed for basic setup. 24V Passive PoE — Single-Cable Install Powered by the included 24V passive PoE adapter; power and data run over one Ethernet cable, removing the need for a power outlet at the device. Ideal for rooftop, pole, and remote installs. Weatherproof Outdoor Housing A UV-stabilised, rain-resistant housing rated for permanent outdoor deployment across Australian conditions — coastal, tropical, and outback — with a wide −30°C to +75°C operating range. Compact CPE Form Factor Smaller and lighter than the full NanoStation M5, the LocoM5 suits residential rooftops, small buildings, and any install where a low-profile, easy-to-aim device is preferred. Common Use Cases Building-to-Building Bridge (P2P) Link two buildings with a high-speed wireless connection — office to warehouse, house to shed, main building to outbuilding. Buy 2 units: one as access point, one as station, for up to 150Mbps over 10+ km line of sight. CCTV Camera Backhaul Stream HD CCTV from a remote camera location back to an NVR or DVR over a wireless link where cabling is impractical. The 5GHz band handles multiple HD streams without congestion. Rural & Remote Internet Extension Extend connectivity to a farm shed, granny flat, remote office, or caravan-park amenities block without trenching cable. Pair with a router at the remote end for full network access. WISP Access Point / Client Deploy as a WISP access point or subscriber CPE. airMAX TDMA handles multiple simultaneous clients efficiently with low latency and fair bandwidth allocation. Temporary & Construction Networks Fast to deploy and easy to reposition — ideal for temporary wireless networks on construction sites, events, and worksites where permanent cabling isn't viable. Access Point Backhaul Use a LocoM5 pair to backhaul traffic from a remote Wi-Fi access point to the main switch — extending coverage without running new cable. Technical Specifications SKU LOCOM5 Frequency Band 5GHz (5.170 – 5.875 GHz) Standard IEEE 802.11a/n Antenna 13dBi dual-polarisation MIMO · integrated Max Throughput Up to 150Mbps Range 10+ km (line of sight) Protocol airMAX TDMA Wireless Modes Station · Access Point · Bridge · Router Management airOS web interface · airControl Power 24V passive PoE (adapter included) Power Consumption Approx. 5.5W Ethernet Port 1 × 10/100 Mbps Operating Temp −30°C to +75°C Housing Outdoor weatherproof · UV-stabilised Weight Approx. 520g (with mount) In the Box LocoM5 unit · 24V PoE adapter · mounting hardware · quick start guide What's in the Box 1 × Ubiquiti NanoStation Loco M5 (LOCOM5) 5GHz outdoor CPE with integrated 13dBi dual-polarisation MIMO antenna and weatherproof housing. Single unit — buy 2 for a complete P2P bridge. 1 × PoE Adapter (24V Passive) Ubiquiti 24V passive PoE injector included — powers the LocoM5 over the Ethernet run. No separate power supply needed at the device. Mounting Hardware Pole/wall mounting bracket and hardware for standard outdoor installation. Quick Start Guide Ubiquiti quick start documentation. Configuration is performed via the airOS web interface from any browser on the same network segment. Frequently Asked Questions Do I need one or two units for a wireless bridge? You need two units for a point-to-point bridge — one at each end. This listing is for a single unit only. Add 2 to cart: one is configured as an access point, the other as a station. What is the maximum range of the LocoM5? The LocoM5 can achieve 10+ km in clear line-of-sight conditions. Real-world range depends on terrain, obstructions, RF interference, and antenna alignment. For links over 5 km, precise alignment and a clear Fresnel zone matter. What's the difference between the LocoM5 and the NanoStation M5? The LocoM5 is smaller with a 13dBi antenna, ideal for short-to-medium links and residential deployments. The NanoStation M5 has a higher-gain antenna for longer links and higher-density WISP use. Both use airMAX TDMA. Does the LocoM5 include a PoE adapter? Yes — a 24V passive PoE adapter is included. Run a single Cat5e or Cat6 cable from the adapter to the LocoM5; no separate injector is required. Can I use the LocoM5 for CCTV camera backhaul? Yes — it's widely used for CCTV backhaul in Australia. The 5GHz band handles multiple HD streams without congestion. Pair two units to link a remote camera location to your NVR. How do I configure the LocoM5? Configuration is done via the airOS web interface — connect a laptop to the same network segment and access it via browser (default IP 192.168.1.20). No proprietary software is required for basic setup. Do you ship Australia-wide? Yes — fast dispatch to every state and territory from Australian stock, with expert local support for link planning and airOS configuration. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $149.00 - $279.00

• 

  Ubiquiti Ubiquiti UniFi U6 Mesh — WiFi 6 Indoor/Outdoor Access Point (U6-Mesh)

  1 review

  UniFi WiFi 6 — NDAA Compliant Ubiquiti UniFi U6 Mesh — WiFi 6 Indoor/Outdoor Access Point (U6-Mesh) The UniFi U6 Mesh is a sleek, high-performance WiFi 6 (802.11ax) access point built for seamless mesh coverage across homes, offices, and outdoor spaces. With 6 spatial streams, a 4x4 MU-MIMO 5 GHz radio reaching 4.8 Gbps and a 2x2 2.4 GHz radio at 573.5 Mbps, the U6 Mesh delivers fast, reliable WiFi for 250+ connected devices. Its IPX5-rated weatherproof housing lets it sit discreetly indoors or stand up to the elements outdoors anywhere in Australia. A PoE adapter is included, so it's plug-and-play in minutes — fully managed through the UniFi Network app. Genuine Ubiquiti stock with fast Australia-wide shipping. WiFi Standard WiFi 6 Throughput 5.3 Gbps Weatherproof IPX5 Power PoE (Adapter Incl.) Why Choose the UniFi U6 Mesh? High-Efficiency WiFi 6 802.11ax with OFDMA and 6 spatial streams delivers faster speeds and far better performance in busy, high-density environments compared to WiFi 5. Up to 5.3 Gbps Aggregate A 4x4 MU-MIMO 5 GHz radio (4.8 Gbps, 160 MHz) plus a 2x2 2.4 GHz radio (573.5 Mbps) keep streaming, gaming, and video calls smooth. Seamless Wireless Meshing Best-in-class signal meshing extends coverage where running cable isn't practical — ideal for filling dead zones across larger homes and sites. Indoor & Outdoor Ready An IPX5 waterproof housing and a −30°C to 60°C operating range let it run reliably outdoors through tough Australian conditions. PoE Adapter Included One Ethernet cable carries power and data (max ~13 W). The included PoE adapter means no nearby power outlet or separate injector to buy. 250+ Connected Devices Handles 250+ concurrent clients with band steering and fast roaming (802.11r/k/v) for a smooth experience as devices move around. UniFi Network Managed Fully managed through the UniFi Network app or web interface — set up in minutes with advanced controls, guest portals, and VLANs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model U6-Mesh WiFi Standard WiFi 6 (802.11ax); backward compatible 802.11a/b/g/n/ac Spatial Streams 6 MIMO 5 GHz: 4 x 4 (DL/UL MU-MIMO) • 2.4 GHz: 2 x 2 (UL MU-MIMO) Max. Data Rate 5 GHz: 4.8 Gbps (BW160) • 2.4 GHz: 573.5 Mbps (BW40) Coverage Area 140 m² (1,500 ft²) Max. Client Count 250+ Antenna Gain 5 GHz: 5 dBi • 2.4 GHz: 3 dBi Max. TX Power 5 GHz: 26 dBm • 2.4 GHz: 22 dBm Networking Interface (1) GbE RJ45 port Power Method PoE • 48V PoE adapter included Supported Voltage Range 44–57V DC Max. Power Consumption 13 W Weatherproofing IPX5 Enclosure Polycarbonate, aluminium Mounting Wall, pole (mounts included); ceiling mount optional Dimensions / Weight ⌀48.5 × 159.5 mm • 400 g Operating Temperature −30°C to 60°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Software UniFi Network 6.0.45 and later Downloads & Resources U6 Mesh Tech Specs U6 Mesh Datasheet (PDF) What's in the Box UniFi U6 Mesh Access Point The U6-Mesh WiFi 6 access point ready for indoor or outdoor mesh deployment. PoE Adapter 48V Gigabit PoE adapter included to power the access point over a single cable. Mounting Kit Wall and pole mount hardware included; ceiling mount available separately. Not Included Network cable and a UniFi Network host (Cloud Gateway / Cloud Key / Dream Machine) are required for management. Best For Homes & Apartments Extend fast WiFi 6 into bedrooms, garages, and backyards without running new cable. Outdoor Areas IPX5 weatherproofing covers patios, alfresco areas, and sheds reliably year-round. Offices & Cafes 250+ client capacity with guest portals and band steering for busy spaces. UniFi Networks Drop-in expansion for any existing UniFi deployment, fully managed in one app. Requires a UniFi Network host (Cloud Gateway, Cloud Key Gen2 Plus, or Dream Machine) running UniFi Network 6.0.45 or later. Powered by the included PoE adapter, or any UniFi PoE switch for single-pane management. Mounts to wall or pole out of the box; ceiling mount adapter available separately. Can run as a wired access point or a wireless mesh node to fill coverage gaps. Frequently Asked Questions Does the U6 Mesh include a PoE adapter? Yes. A 48V Gigabit PoE adapter is included in the box, so you can power and connect the access point with a single Ethernet cable. Can the U6 Mesh be used outdoors in Australia? Yes. Its IPX5 weatherproof housing and −30°C to 60°C operating range suit covered outdoor areas across Australian conditions. What do I need to manage the U6 Mesh? A UniFi Network host such as a Cloud Gateway, Cloud Key Gen2 Plus, or Dream Machine running UniFi Network 6.0.45 or later. Can it work as a wireless mesh node? Yes. The U6 Mesh supports wireless meshing to extend coverage where running cable isn't practical, or it can run as a standard wired AP. How many devices can it handle? 250+ concurrent clients, with band steering and fast roaming (802.11r/k/v) for a smooth experience in busy environments. Is the U6 Mesh NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the U6 Mesh is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $423.18

• Save $3.01

  Ubiquiti Ubiquiti UISP-Cable-Pro Cat5e Outdoor Cable 305m — Shielded, ESD Drain Wire (Replaces TC-PRO)

  Carrier-Class Outdoor Cat5e — NDAA Compliant Ubiquiti UISP-Cable-Pro — Cat5e Outdoor Shielded Ethernet Cable, 305 m (Replaces TC-PRO) The Ubiquiti UISP-Cable-Pro is an industrial-grade, carrier-class Category 5e outdoor Ethernet cable built to protect your network from the elements and electrostatic damage. A highly insulating, weatherproof jacket guards against rain, snow, and extreme conditions, while internal foil shielding and an integrated ESD drain wire maintain reliable Gigabit Ethernet link rates even with electromagnetic interference present. Supplied as a full 305 m (1,000 ft) reel and a direct replacement for the older TC-PRO, it ships as genuine Ubiquiti stock with fast AU-wide shipping right across Australia. Weatherproof Outdoor Jacket A highly insulating, weatherproof jacket prevents damage from rain, snow, and other extreme climatic conditions for reliable long-run outdoor cabling. Shielding + ESD Drain Wire Internal foil shielding and a drain wire protect against electrostatic discharge (ESD) and sustain Gigabit Ethernet link rates even with electromagnetic interference. 24 AWG Solid Copper 24 AWG solid copper conductor pairings deliver strong, stable performance over long structured-cabling runs. 305 m Reel — Replaces TC-PRO Supplied as a full 1,000 ft (305 m) Cat5e reel and a direct, drop-in replacement for Ubiquiti's earlier TC-PRO cable. Technical Specifications Model / SKU UISP-Cable-Pro (replaces TC-PRO) Category Category 5e Length 1,000 ft (305 m) Conductor 24 AWG solid copper conductor pairings Jacket Insulated, weatherproof outdoor jacket Shielding Internal foil shielding with integrated ESD drain wire Performance Maintains Gigabit Ethernet link rates under EMI Application Outdoor / carrier-class structured cabling Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $299.00 $295.99

• Save $690

  UNV Uniview UNV 8MP OwlView CCTV Kit | 4 × Full 24/7 Colour Cameras + 8-Channel AI NVR

  Uniview UNV · 4 × 8MP OwlView ColorHunter · 24/7 Full Colour · 8CH AI IQ NVR · NDAA 4 × 8MP OwlView Kit Uniview UNV 8MP OwlView CCTV Kit — 4 × Full 24/7 Colour Cameras + 8-Channel AI IQ NVR This Uniview UNV 8MP OwlView kit pairs four IPC3628LE-ADF28K-WP ColorHunter turret cameras with the NVR501-08B-P8-IQ 8-channel AI IQ recorder for true full-colour surveillance around the clock. Each camera uses a large 1/1.8″ sensor, a fast F1.0 2.8 mm lens and Wise-ISP processing to capture bright, vivid colour after dark — with smart warm-light LEDs reaching 30 m for driveways, yards and entries. All four run on a single Cat6 cable each into the NVR's 8 built-in PoE ports, leaving 4 channels free to expand later. The whole kit is NDAA Section 889 compliant and backed by a 3-year Australian warranty. Available in white or black. Cameras 4 × 8MP OwlView ColorHunter Recorder 8CH AI IQ NVR · 8 PoE Night Vision 24/7 Full Colour · 30 m AI Search AcuSearch · AcuTrack · SeekFree Audio Built-in Mic Weatherproof IP67 Rated OwlView ColorHunter — Full Colour All Night The 1/1.8″ sensor, F1.0 lens and Wise-ISP processing capture true full-colour 4K detail in near-darkness, with smart warm-light LEDs to 30 m — so you record clothing colour, faces and vehicles in colour 24/7, not just black-and-white IR. Smart AI Detection On-camera human and vehicle detection with line-crossing and intrusion alerts filters out trees, rain and shadows, so only real events reach your phone. 120 dB true WDR keeps bright and shaded areas balanced. AI IQ Recorder — Find Events Fast The NVR501-IQ adds AcuSearch, AcuTrack and SeekFree: filter footage by people or vehicles, follow a target across cameras, or search recordings in plain language — find what you need in seconds instead of scrubbing for hours. One-Cable PoE Install Eight built-in PoE ports power and connect each camera over a single Cat6 run — no separate switch or power supplies. 4K HDMI output, free EZCloud/UNV-Link remote viewing, and 4 spare channels to grow into. What's Included 4 × Cameras IPC3628LE-ADF28K-WP — 8MP OwlView ColorHunter turret, 1/1.8″ sensor, F1.0 2.8 mm lens, warm light to 30 m, 120 dB WDR, built-in mic, IP67. White or black option available. 1 × Recorder NVR501-08B-P8-IQ — 8-channel 4K AI IQ NVR, 8 built-in PoE ports, 1 SATA bay (to 16 TB), 4K HDMI + VGA, AcuSearch/AcuTrack/SeekFree. 4 channels used, 4 spare. Power 8 × PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay — HDD not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Mounting Brackets and templates included for eave/soffit installs. For brick or flush-wall mounting, add a Uniview wall-mount bracket or junction box per camera for tidy cable management. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Uniview UNV Australian stock. Best For Homes & residential Full-colour night coverage of the front door, driveway, yard and side access on a single recorder. Retail shopfronts Colour identification at the till and entry, with clear footage across aisles and the stockroom. Offices & reception Colour ID at reception and entries, plus cover of corridors and back exits. NDAA / government sites Section 889-compliant cameras and recorder for government, education and enterprise projects. Warehouses & yards Colour on the loading dock and gate, with room to add 4 more cameras as the site grows. Small business A clean 4-camera full-colour system with AI search and 4 spare channels to scale up later. Camera — Uniview UNV IPC3628LE-ADF28K-WP (×4) Camera Type 8MP OwlView ColorHunter Fixed Eyeball Turret (Wise-ISP) Image Sensor 1/1.8″ progressive-scan CMOS Max. Resolution 8MP · 3840 × 2160 @ 20 fps Lens Fixed 2.8 mm @ F1.0 (wide field of view) Night Vision ColorHunter + Wise-ISP — true full colour · smart warm light up to 30 m Wide Dynamic Range 120 dB true WDR · 2D/3D DNR · BLC/HLC · Digital Defog Smart Analytics Human & vehicle detection · line crossing · intrusion Audio Built-in microphone Compression Ultra 265 / H.265 / H.264 / MJPEG · dual streams Edge Storage MicroSD up to 512 GB · ANR · NAS Power PoE (IEEE 802.3af) Ingress Protection IP67 · 4 kV surge · −30 °C ~ 60 °C Compliance NDAA / Section 889 compliant Warranty (Australia) 3 years · CCTV Guru Australia Recorder — Uniview UNV NVR501-08B-P8-IQ Channels 8 IP channels (4 used, 4 spare) Built-in PoE 8 × RJ45 PoE — plug & play, IEEE 802.3at/af · 30 W per port, 75 W total Max. Recording Up to 16MP · Ultra 265 / H.265 / H.264 AI Search AcuSearch · AcuTrack · SeekFree · SmartSearch VCA (by IPC) Face Detection · SIP (Intrusion, Cross Line, Enter/Leave) · UMD · People Counting Video Output 1 × HDMI (4K) + 1 × VGA — simultaneous Storage 1 × SATA bay, up to 16 TB (HDD sold separately) Network / Remote 1 × RJ45 10/100M · ONVIF S/G/T · P2P cloud via UNV app & EZCloud ANR Supported — edge recording backfill on network drop Compliance NDAA Compliant · CE / FCC / UL / RoHS Warranty (Australia) 3 years · CCTV Guru Australia CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Installation Notes ›Camera placement: mount cameras 2.5–3 m high, angled down across entries, driveways and perimeters; keep warm-light LEDs clear of walls and eaves to avoid glare. ›Cabling & sealing: run solid-copper Cat6 to each camera and seal outdoor RJ-45 joins with a junction box or weatherproof tape against moisture and salt air. ›NVR & storage: fit a surveillance-grade HDD before first boot, and place the recorder in a cool, dust-free, ventilated spot away from direct sunlight for reliable 24/7 recording. Downloads & Resources IPC3628LE-ADF28K-WP Datasheet Uniview UNV Turret Quick Start Guide Uniview UNV Turret User Manual Do the cameras record in colour at night?Yes. These are 8MP OwlView ColorHunter cameras — the 1/1.8″ sensor, F1.0 lens and Wise-ISP deliver true full-colour video 24/7, with warm-light LEDs reaching up to 30 m in dark scenes. Is this kit NDAA compliant?Yes. Both the Uniview UNV ColorHunter cameras and the NVR501-08B-P8-IQ recorder are NDAA Section 889 compliant, making this kit suitable for government, education and security-sensitive sites in Australia. Does a hard drive come included?No — the NVR has one SATA bay but ships without storage. We recommend a surveillance-grade Seagate SkyHawk or WD Purple HDD. Use our storage calculator to size your drive for your preferred recording settings. How much recording time will I get?Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Use our storage calculator for an estimate based on your settings. How are the cameras powered?Each camera runs on a single Cat6 cable to one of the NVR's 8 built-in PoE ports — no separate power supplies or powerpoints at the camera. Can I add more cameras later?Yes. The NVR has 8 PoE ports and you're using 4, so you can add up to 4 more cameras by plugging them into the spare ports — no recorder upgrade needed. What is AcuSearch, AcuTrack and SeekFree?They're the recorder's -IQ AI review tools: AcuSearch filters footage by people and vehicles, AcuTrack follows a target across cameras, and SeekFree lets you search recordings by typing what you're after — so you find events in seconds. Can I view it remotely?Yes. Free P2P cloud access through the Uniview UNV app and EZCloud lets you watch live and recorded footage from your phone or computer anywhere. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $1,059.00 - $1,299.00

• 

  UNV Uniview UNV IPC3638SE-ADZKMC-WP-I1 8MP Tri-Guard Turret — ColorHunter 24/7 Colour | Motorised 2.8–12mm | Dual-Light

  NDAA Compliant · 8MP ColorHunter Tri-Guard TurretUNV 8MP Motorised Turret IPC3638SE-ADZKMC-WP-I1 8MP Tri-Guard Turret — Australian Stock & 3-Year Warranty The Uniview UNV IPC3638SE-ADZKMC-WP-I1 is a high-performance 8 MP Tri-Guard turret with a motorised varifocal 2.8–12 mm lens for remote zoom and framing, built for true selectable IR or colour night surveillance across Australian commercial and outdoor sites. It pairs a large 1/1.8″ CMOS sensor and bright F1.2 optics with ColorHunter + Wise-ISP low-light colour, a dual-light (IR + warm) system to 30 m, 130 dB true WDR, active deterrence, two-way audio, on-board AI analytics and a rugged IP67 + IK10 + NEMA 4X housing — powered over a single PoE cable and backed by a 3-year Australian warranty. Prefer IR-only night vision? This camera supports IR-only night lighting: select Infrared in Smart Illumination. The night image is black and white; warm-white lighting is optional. Leave Day/Night on Auto for colour in daylight and IR at night. Smart Dual-Light can turn the warm light on during a detection event. If you want the warm light to stay off, use Infrared and disable any separately configured visible-light alarm linkage. Menu labels can vary by firmware and app. Why the IPC3638SE-ADZKMC-WP-I1 stands out Resolution 8MP / 3840×2160 Low-Light ColorHunter + 130dB WDR Night Vision Dual-light IR + warm 30m Lens / View 2.8–12mm motorised Built for Australian conditions Frame any scene remotely The motorised varifocal 2.8–12 mm lens lets you zoom and focus from your NVR or app — wide for whole driveways, tight for gates and entry points — without touching the camera. True colour through the night ColorHunter with Wise-ISP and an F1.2 aperture capture vivid full-colour footage down to 0.0005 lux, so number plates, clothing and vehicle colours stay readable after dark. Active deterrence + AI Tri-Guard warm light plus on-camera human and vehicle classification, intrusion prevention, people counting and crowd density cut false alarms from trees, rain and shadows. Built tough for the outdoors IP67 sealing, an IK10 vandal-resistant metal body and NEMA 4X protection shrug off Australian sun, dust and downpours, with built-in dual mic and speaker for two-way audio over a single PoE cable. Technical specifications Uniview UNV IPC3638SE-ADZKMC-WP-I1 — Full Specifications Brand / Series Uniview UNV · OwlView / Tri-Guard Model IPC3638SE-ADZKMC-WP-I1 Image Sensor 1/1.8″ progressive-scan CMOS Resolution 8 MP — 3840×2160 @ 30fps Lens Motorised varifocal 2.8–12 mm @ F1.2 Field of View (H) 111.5° – 54.1° Min. Illumination 0.0005 lux (colour, F1.2, AGC ON) Low-Light Tech ColorHunter + Wise-ISP full-colour Illumination Dual-light: Smart IR + warm light up to 30 m Wide Dynamic Range 130 dB true WDR Smart Analytics Intrusion prevention, line crossing, people counting, crowd density (human/vehicle/non-motor) Audio Built-in dual mic & speaker · two-way audio · Audio I/O 1/1 Alarm I/O 1 / 1 Compression Ultra 265 / H.265 / H.264 / MJPEG Storage MicroSD up to 512 GB · ANR · NAS Network RJ45 10/100M · ONVIF S/G/T/M · RTSP / HTTPS Power PoE (IEEE 802.3af) / DC 12V · max 7W Weather / Vandal IP67 · IK10 · NEMA 4X metal housing Operating Temp. -30 °C to 60 °C Form Factor Varifocal turret · 3-axis adjustment Compliance NDAA / Section 889 compliant Warranty 3-Year Australian warranty IR-only night mode Supported — select Infrared; black-and-white night image; warm-white illumination optional Frequently asked questions Can I use IR-only night vision and keep the warm light off?Yes. Select Infrared in Smart Illumination to use IR night vision without the warm-white illuminator for night lighting. Night footage is black and white. Leave Day/Night on Auto if you want colour video in daylight and automatic black-and-white IR video at night. If you also want no visible warning light during detections, disable any separately configured light/alarm-light linkage. What is the difference between Infrared, White Light and Smart Dual-Light?Infrared provides black-and-white night video without warm-white night illumination. White Light uses visible warm-white illumination for colour video in darkness. Smart Dual-Light normally uses IR at night, then switches on white light when a supported detection event occurs. To keep the warm light off, choose Infrared rather than Smart Dual-Light. Setting names and availability in the app or NVR can vary with camera firmware. Does it record in colour at night?Colour night video is an option, not a requirement. ColorHunter/Wise-ISP supports colour imaging with sufficient ambient light or warm-white illumination. For night monitoring without the warm light, select Infrared; the night image will be black and white. Is the lens fixed or motorised?It uses a motorised varifocal 2.8–12 mm lens, so you can remotely zoom and focus from your NVR or the Uniview UNV app to frame the exact scene you need. Is the IPC3638SE-ADZKMC-WP-I1 NDAA compliant?Yes. Uniview UNV Tri-Guard cameras are NDAA Section 889 compliant, making them suitable for government, commercial and security-sensitive sites in Australia. Does it have active deterrence?Yes. Tri-Guard combines warm light, a built-in speaker and two-way audio so you can warn off intruders, while AI intrusion prevention triggers alerts on people and vehicles. How is it powered?Single-cable PoE (IEEE 802.3af) over Cat6 to a PoE NVR or switch, drawing up to 7W. A 12V DC option is also supported. Does it support two-way audio?Yes — a built-in dual microphone and speaker with Audio I/O 1/1 enable two-way audio (check local laws before recording audio). Which NVRs work with it?It works with Uniview UNV NVRs via plug-and-play and with most ONVIF (Profile S/G/T/M) recorders for video and AI events. Can it record without an NVR?Yes — a MicroSD card (up to 512 GB) enables on-camera recording, with ANR to fill gaps if the network drops. What warranty applies?This camera ships with a 3-year Australian warranty and local CCTV Guru tech support. Documentation & downloads IPC3638SE-ADZKMC-WP-I1 Datasheet Uniview UNV Turret Camera User Manual Uniview UNV Turret Quick Start Guide 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $469.00

• 

  Teltonika Teltonika TSW010 DIN Rail Switch | 5-Port 10/100 Industrial Ethernet Switch

  Unmanaged Switch · DIN Rail · Plug and Play Teltonika TSW010 Industrial DIN Rail Switch The simplest way to extend wired Ethernet across multiple industrial devices — five 10/100 Mbps ports, rugged anodised aluminium housing, and integrated DIN rail mounting, ready to install in seconds. The Teltonika TSW010 is a compact, unmanaged DIN rail switch designed for industrial and commercial networking environments where reliability and simplicity matter most. With five 10/100 Mbps Ethernet ports, plug-and-play operation, and a wide 9–30 V DC power input, the TSW010 is the natural companion for Teltonika routers in CCTV cabinets, industrial enclosures, and remote site deployments across Australia. No configuration. No software. No complexity. Just connect power, plug in your devices, and the TSW010 is live. Pair the TSW010 with our Teltonika industrial networking range or IP security camera systems for a complete, DIN rail-mounted networking solution. True Plug and Play Zero configuration required. No web interface, no CLI, no setup time — ideal for installers who need to move fast on site. 5 × 10/100 Ethernet Five Fast Ethernet ports provide stable, reliable connectivity for IP cameras, NVRs, access control panels, and industrial devices. DIN Rail & Surface Mount Integrated DIN rail bracket ships in the box. Surface mounting is also supported for full flexibility in any enclosure or cabinet. Rugged Aluminium Housing Anodised aluminium construction handles vibration, dust, and temperature extremes that would compromise a consumer-grade switch. Wide Voltage Input Accepts 9–30 V DC, compatible with industrial DIN rail power supplies, solar systems, and vehicle power without a dedicated rail. Industrial Temperature Range Rated from −40 °C to +75 °C — built to run continuously in the most demanding Australian field conditions, year after year. Why choose the TSW010 for Australian deployments? The Teltonika TSW010 is purpose-built for professional installers and system integrators who need a dependable, no-fuss Ethernet switch that fits neatly alongside routers and modems on a standard DIN rail. Unlike consumer switches, the TSW010 is rated for industrial temperatures, powered from the same DC rail as your router, and built to last in enclosures where access is infrequent. Cabinet-Ready Design Compact 95 × 25 × 75 mm footprint fits neatly alongside Teltonika routers and DIN rail power supplies in standard enclosures. Shared DC Power Rail Powers from the same 9–30 V DC supply as your router — no separate AC adapter or additional power point required in the cabinet. Set and Forget Unmanaged operation means nothing to configure, nothing to update, and nothing to fail remotely — just reliable switching, always on. Teltonika Ecosystem Designed to pair with Teltonika routers including the RUT241, RUTX11, and RUTX50 for a complete, matched industrial networking solution. Common TSW010 deployment applications CCTV & IP Camera Networks Expand NVR port count or distribute camera connections across a cabinet. Pairs perfectly with Teltonika 4G/5G routers for a self-contained CCTV networking solution. Industrial IoT & Automation Connect PLCs, HMIs, sensors, and telemetry devices on a shared Ethernet segment in factory floors, substations, and remote plant rooms. Access Control & Intercom Provide wired Ethernet to access control panels, intercoms, and door controllers in building automation cabinets with zero commissioning overhead. Remote & Unmanned Sites Deploy at water treatment plants, communications towers, and agricultural monitoring sites where simplicity and long-term reliability are non-negotiable. Teltonika TSW010 specifications Model Teltonika TSW010 Product Type Unmanaged Industrial DIN Rail Switch Ethernet Ports 5 × RJ45 (10/100 Mbps, Auto MDI/MDIX) Switching Capacity 1 Gbps MAC Address Table 1,024 entries Management Unmanaged (plug and play, no configuration) Power Input 9–30 V DC (2-pin power connector) Power Consumption < 3 W (max) Operating Temperature −40 °C to +75 °C Storage Temperature −40 °C to +85 °C Humidity 10–90% non-condensing Housing Anodised aluminium Mounting DIN rail (integrated bracket) & surface mount Dimensions 95 × 25 × 75 mm Weight 180 g Certifications NDAA 889, CE, RCM (Australian Compliance) Warranty 2 Years What’s in the box Teltonika TSW010 DIN rail switch DIN rail mounting bracket (integrated) Quick start documentation Downloads & setup resources Access official Teltonika resources for installation, specifications, and compliance documentation. Product DatasheetFull hardware specifications and certifications (PDF) &nearr; Quick Start GuideStep-by-step installation and mounting instructions ↗ Official Product PageManufacturer specifications, features and downloads ↗ Teltonika WikiTechnical knowledge base, LED indicators and compliance docs ↗ TSW010 product video Official Teltonika product overview and installation guidance for the TSW010 DIN rail switch. Teltonika TSW010 Overview Product overview covering the TSW010's key features, mounting options, and typical deployment scenarios for industrial and CCTV applications. Teltonika TSW010 FAQ Does the TSW010 require any configuration? No. The TSW010 is fully unmanaged — no web interface, no software, and no setup required. Connect power, plug in your devices, and it works immediately. What power supply does the TSW010 use? The TSW010 accepts 9–30 V DC via a 2-pin connector, compatible with most industrial DIN rail power supplies. A suitable AU power supply is available separately in the Teltonika accessories range. Can I use the TSW010 with a Teltonika router? Absolutely. The TSW010 is designed to complement Teltonika routers such as the RUT241, RUTX11, and RUTX50, forming a compact DIN rail-mounted networking solution ideal for CCTV cabinets and industrial enclosures. Is the TSW010 suitable for harsh or outdoor environments? The TSW010 is rated for −40 °C to +75 °C and features anodised aluminium housing, making it well-suited for industrial enclosures. It is not rated for direct outdoor exposure without an appropriate IP-rated enclosure. Does the TSW010 support PoE? No. The TSW010 does not support Power over Ethernet. For PoE switching, consider the Teltonika TSW101 or TSW110 from the CCTV Guru Teltonika range. How many devices can I connect to the TSW010? Up to five devices via the five RJ45 ports. For larger installations, multiple TSW010 units can be daisy-chained or a larger Teltonika switch such as the TSW110 or TSW200 can be used. Will the TSW010 work with Hikvision, Dahua, or Uniview cameras? Yes. The TSW010 provides standard 10/100 Mbps Ethernet connectivity compatible with all major IP camera brands including Hikvision, Dahua, Uniview, and Tiandy. Is the TSW010 RCM certified for Australia? Yes. The TSW010 carries CE and RCM certification, confirming compliance with Australian electromagnetic compatibility and electrical safety requirements. 2-Year Warranty Australia-Wide Shipping Australian Tech Support

  Read more less

  $69.00

• Save $30

  Ubiquiti UniFi Protect G6 Turret – 4K 8MP PoE AI Camera with Multi-TOPS (UVC-G6-Turret)

  UniFi Protect — NDAA CompliantUbiquiti 4K Turret UniFi Protect G6 Turret — 4K 8MP PoE AI Camera (UVC-G6-Turret) The UniFi Protect G6 Turret is the flagship turret camera in the UniFi Protect ecosystem — delivering true 4K 8MP resolution from a large 1/1.8″ sensor, an on-device Multi-TOPS AI engine, and seamless UniFi Protect integration over a single PoE cable. Whether you're securing a home, office, retail space, warehouse, or commercial site anywhere in Australia, the G6 Turret gives you enterprise-grade surveillance with no monthly fees and no cloud lock-in. Available in White (UVC-G6-Turret-W) and Black (UVC-G6-Turret-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 4K / 8MP Night Vision IR 30 m Protection IP66 / IK04 Power Single-Cable PoE Why Choose the UniFi Protect G6 Turret? True 4K 8MP ClarityA large 1/1.8″ 8MP CMOS sensor captures 4K UHD footage (3864 × 2160) at 30 FPS with HDR — enough detail to identify faces, read number plates, and review incidents with confidence. Multi-TOPS AI EngineOn-camera AI detects people, vehicles, animals, faces, and number plates in real time — dramatically reducing false alerts and letting you act on what actually matters. Wide 109.9° Field of ViewCover more ground with fewer cameras. The 109.9° horizontal FOV is ideal for open areas, car parks, retail floors, and building entries where wide coverage is critical. 30 m IR Night VisionBuilt-in IR LEDs illuminate up to 30 metres in complete darkness, ensuring clear, detailed footage 24/7 without any additional lighting infrastructure. IP66 Weatherproof + IK04 Tamper-ResistantAn aluminium-alloy body sealed to IP66 shrugs off rain, dust, and moisture, while IK04 impact resistance and a wide −30°C to 50°C operating range keep it reliable through tough Australian conditions. Single-Cable PoE InstallationOne Ethernet cable delivers both power and data (max 12.5 W) — no separate power run, no electrician required. Works with any 802.3af PoE switch or UniFi PoE switch, plus easy 3-axis manual aiming. UniFi Protect — No SubscriptionManage live views, recordings, AI alerts, and camera settings through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA CompliantFully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-Turret (White: UVC-G6-Turret-W / Black: UVC-G6-Turret-B) Resolution 4K UHD — 8 MP, 3864 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Lens Fixed focal length Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI Engine) Audio Built-in microphone Weatherproof Rating IP66 Impact / Tamper Resistance IK04 Network Interface 10/100 MbE RJ45 Power Method PoE (802.3af), 37–57 V DC • max 12.5 W Processor Quad-core Arm® Cortex®-A53 Mounting Ceiling & wall (included); arm, pendant, junction box (optional) • 3-axis adjustment Enclosure Aluminium alloy & polycarbonate Dimensions / Weight ⌀100 × 95 mm • 550 g Operating Temperature −30°C to 50°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-Turret-W) / Black (UVC-G6-Turret-B) Downloads & Resources UVC-G6-Turret Datasheet Ubiquiti Turret Quick Start Guide What's in the Box UniFi Protect G6 Turret CameraYour choice of White (UVC-G6-Turret-W) or Black (UVC-G6-Turret-B) finish. Mounting KitCeiling & wall mounting bracket, screws, and anchors included. DocumentationQuick-start guide and installation instructions. Not IncludedA PoE switch/injector and network cable are required and sold separately. Best For Homes & Driveways Wide 4K coverage of entries, driveways, and backyards with accurate person and vehicle alerts. Retail & Hospitality Identify faces at the till and entrance while AI filtering cuts nuisance notifications. Offices & Warehouses Local UniFi Protect recording with no subscription — ideal for multi-camera commercial sites. Car Parks & Gates Number-plate recognition and 30 m IR keep entry points covered around the clock. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any 802.3af PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to ceiling or wall out of the box; arm, pendant, and junction-box adapters available separately. 3-axis manual adjustment lets you fine-tune the field of view after mounting. Frequently Asked Questions Does the G6 Turret require a UniFi Protect subscription?No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G6 Turret?A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus an 802.3af PoE switch to power the camera. Is it suitable for outdoor use in Australia?Yes. IP66 weatherproofing, IK04 impact resistance, and a −30°C to 50°C range suit Australian outdoor environments including coastal, high-humidity, and high-UV areas. What's the difference between the White and Black versions?Identical specs and performance — only the colour differs. White (UVC-G6-Turret-W) suits light soffits and walls; Black (UVC-G6-Turret-B) suits dark surfaces and discreet installs. Can it read number plates and recognise faces?Yes. The Multi-TOPS AI engine includes number-plate recognition and face recognition alongside people, vehicle, and animal detection. Is the G6 Turret NDAA compliant?Yes. Ubiquiti is a US-based manufacturer and the G6 Turret is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $452.95 - $459.00

• 

  UNV Uniview UNV IPC3638SB-ADZK-I0 — 8MP LightHunter Motorised Varifocal Turret | 2.8–12 mm | NDAA

  NDAA Compliant · 8MP LightHunter Motorised Turret UNV 8MP LightHunter Turret IPC3638SB-ADZK-I0 — Australian Stock & 3-Year Warranty The Uniview UNV IPC3638SB-ADZK-I0 delivers crisp 8 MP (4K) video with LightHunter low-light imaging and 120 dB true WDR for balanced, detailed scenes. A motorised 2.8–12 mm varifocal lens with autofocus lets you frame wide areas or zoom into detail, while Smart IR provides clear night vision up to 40 m. With a built-in microphone, on-camera AI human/vehicle filtering, single-cable PoE, IK10 vandal resistance and an IP67 weather rating, it's a versatile indoor/outdoor choice for Australian commercial and residential sites — backed locally with a 3-year Australian warranty. Why the IPC3638SB-ADZK-I0 stands out Resolution 8MP / 3840×2160 Low-Light LightHunter + 120dB WDR Night Vision Smart IR to 40m Lens / View 2.8–12 mm motorised Built for Australian conditions Frame any scene The motorised 2.8–12 mm varifocal lens with autofocus lets you zoom from a wide overview to a tight long-range shot remotely — no ladder, no refocusing. See detail in tricky light LightHunter low-light processing and 120 dB true WDR keep bright doorways, driveways and shaded yards balanced and clear, with 2D/3D DNR and digital defog. Smart AI events On-camera human and vehicle filtering for intrusion and line-crossing cuts false triggers from trees, rain and shadows, with tamper and audio detection. Weatherproof & tough IP67 sealing and an IK10 vandal-resistant body handle Australian sun, dust and downpours, with single-cable PoE and a built-in mic for scene audio. Technical specifications Uniview UNV IPC3638SB-ADZK-I0 — Full Specifications Brand / Series Uniview UNV · LightHunter Model IPC3638SB-ADZK-I0 Image Sensor 1/2.8″ progressive-scan CMOS Resolution 8 MP (4K) — 3840×2160 up to 20/25/30 fps Lens Motorised varifocal 2.8–12 mm with autofocus Low-Light Tech LightHunter · 2D/3D DNR · digital defog Wide Dynamic Range 120 dB true WDR Night Vision Smart IR up to 40 m · ICR day/night Smart Analytics Perimeter (line, intrusion, enter/leave) with human/vehicle classification · tamper & audio detection Audio Built-in microphone · G.711 Compression Ultra 265 / H.265 / H.264 / MJPEG · U-Code · ROI Storage MicroSD up to 512 GB · ANR · NAS Network RJ45 10/100M · ONVIF · RTSP / HTTPS Power PoE (IEEE 802.3af) / DC 12V Weather / Vandal IP67 · IK10 Form Factor Turret · 3-axis adjustment · 9:16 corridor mode Compliance NDAA / Section 889 compliant Warranty 3-Year Australian warranty Frequently asked questions Does it record in colour at night?At night this model uses Smart IR for crisp black-and-white night vision up to 40 m. LightHunter still delivers detailed low-light footage at dusk. For full-colour night vision, consider a ColorHunter or Tri-Guard model. What is the lens range?A motorised 2.8–12 mm varifocal lens with autofocus lets you adjust zoom and focus remotely — from a wide overview to a tighter long-range shot. Is the IPC3638SB-ADZK-I0 NDAA compliant?Yes. Uniview UNV LightHunter cameras are NDAA Section 889 compliant, suitable for government, commercial and security-sensitive sites in Australia. What resolution does it capture?Full 8 MP 4K (3840×2160) at up to 30 fps, with Ultra 265 / U-Code to keep bandwidth and storage efficient. How is it powered?Single-cable PoE (IEEE 802.3af) over Cat6 to a PoE NVR or switch. A 12V DC option is also supported. Does it have a microphone?Yes — a built-in mic captures scene audio alongside video (check local laws before recording audio). Can it record without an NVR?Yes — a MicroSD card up to 512 GB enables on-camera recording, with ANR to fill gaps if the network drops. Is it suitable outdoors?Absolutely. The IP67-rated, IK10 vandal-resistant body is built for permanent outdoor installation in Australian conditions. What warranty applies?This camera ships with a 3-year Australian warranty and local CCTV Guru tech support. Documentation & downloads IPC3638SB-ADZK-I0 Datasheet Uniview UNV Eyeball Quick Start Guide Uniview UNV Eyeball User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $339.00

• Lead time: 50 days

  AXIS AXIS M2035-LE 2MP Outdoor Bullet Camera 3.2mm (02124-001)

  NDAA Compliant • 2MP Outdoor Bullet AXIS 2MP Bullet AXIS M2035-LE 02124-001 — Australian Stock & 5-Year Warranty The Axis M2035-LE is a compact, outdoor-ready 1080p bullet camera with on-board deep learning, giving you accurate detection and classification of people and vehicles without paying for a premium model. The 3.2mm fixed lens delivers a wide 101° field of view, while built-in IR, Forensic WDR and Lightfinder keep the picture clear from bright midday glare through to total darkness. Resolution 2MP 1080p Lens / FoV 3.2mm · 101° Night Vision 20m IR Weather Rating IP66/67 · IK08 Deep learning analytics built in A dedicated deep learning processing unit (DLPU) runs AXIS Object Analytics directly on the camera, detecting and classifying humans and vehicle types (cars, buses, trucks, bikes) for smarter, lower-noise alerts. AXIS Scene Metadata adds searchable attributes such as vehicle colour and clothing colour, while AXIS Edge Vault and a CC EAL6+ secure element protect the device identity on your network. Wide-area coverage The 3.2mm F1.4 fixed lens gives a 101° horizontal field of view, ideal for driveways, yards, shopfronts and entrances where you want to see the whole scene from one camera. Clear day and night Lightfinder preserves colour in low light, Forensic WDR (up to 115 dB) handles harsh backlight, and OptimizedIR 855nm LEDs reach roughly 20m for usable footage in complete darkness. Built for tough sites IP66, IP67, NEMA 4X and IK08 ratings with a -30°C to 50°C operating range mean it shrugs off rain, dust, salt spray and impact, indoors or out. Simple PoE install A single Class 3 PoE cable carries power and data. The factory-focused lens and spacious sealed back box make mounting on walls, ceilings, poles or corners quick and tidy. Technical Specifications Camera & Image Image sensor 1/2.9" progressive scan RGB CMOS Resolution 1920 x 1080 (HDTV 1080p), 2MP Lens 3.2mm, F1.4, fixed iris, fixed focus, IR corrected Field of view 101° horizontal, 54° vertical Min illumination Colour 0.16 lux; B/W 0.03 lux; 0 lux with IR on WDR Forensic WDR up to 115 dB Day/night Automatically removable IR-cut filter Frame rate Up to 25/30 fps Analytics & Processing Processor CV25 SoC with deep learning processing unit (DLPU) Memory 1024 MB RAM, 512 MB Flash Included analytics AXIS Object Analytics, AXIS Scene Metadata, AXIS Live Privacy Shield, Video Motion Detection, active tampering alarm Object classes Humans, vehicles (cars, buses, trucks, bikes) Video & Audio Compression H.264 (Main/High), H.265, Motion JPEG, Axis Zipstream Audio Two-way audio connectivity via portcast technology; edge-to-edge speaker pairing PTZ Digital PTZ, Corridor Format Network, Power & Storage Power PoE IEEE 802.3af/802.3at Type 1 Class 3; typical 5 W, max 12.95 W Connector RJ45 10BASE-T/100BASE-TX PoE Storage microSD/SDHC/SDXC (AES-XTS-256 encryption), NAS recording ONVIF Profiles G, M, S and T Cybersecurity Axis Edge Vault, secure element (CC EAL6+), signed video, secure boot Environmental & Mechanical IR illumination OptimizedIR 855nm LEDs, reach approx. 20m Casing IP66, IP67, NEMA 4X and IK08; aluminium and plastic; white Operating temp -30°C to 50°C; humidity 10–100% RH Dimensions 170mm long, Ø 101mm Weight 491 g Compliance NDAA Section 889 / TAA compliant Part number 02124-001 Downloads AXIS M2035-LE DatasheetAxis Bullet Camera Quick Start GuideAxis Bullet Camera User Manual Frequently Asked Questions What area does the 3.2mm lens cover? The 3.2mm fixed lens gives a wide 101° horizontal and 54° vertical field of view, suited to driveways, yards, entrances and shopfronts where you want broad coverage from a single camera. How far does the night vision reach? Built-in OptimizedIR 855nm LEDs reach approximately 20m, and the camera records at 0 lux in complete darkness. Lightfinder also keeps footage in colour for as long as possible before switching to IR. Does it have on-camera AI? Yes. A deep learning processing unit runs AXIS Object Analytics on the edge, detecting and classifying people and vehicle types for accurate, low-noise alerts without a separate server. Is the M2035-LE NDAA compliant? Yes. All Axis cameras, including the M2035-LE, are NDAA Section 889 and TAA compliant, making them suitable for government and enterprise deployments. How is it powered? A single Power over Ethernet cable (IEEE 802.3af/at Type 1, Class 3) supplies both power and data. Typical draw is 5 W, max 12.95 W. Is it weatherproof enough for full outdoor use? Yes. It carries IP66, IP67, NEMA 4X and IK08 ratings and operates from -30°C to 50°C, so it handles rain, dust, salt spray, ice and impact. Can I record locally? Yes. There is a microSD/SDHC/SDXC slot with AES-XTS-256 card encryption, plus recording to network-attached storage (NAS). Which NVRs and software work with it? It supports ONVIF Profiles G, M, S and T and works with AXIS Camera Station as well as ONVIF-compatible third-party recorders and VMS platforms. What warranty applies in Australia? The M2035-LE comes with a 5-year Axis manufacturer warranty, supported locally for Australian buyers. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $782.95

• Save $50

  Bosch Bosch RFPR-12 — RADION Wireless Pet-Friendly PIR Motion Sensor (12x12m)

  RADION · Wireless · Pet-Friendly · 433MHz Wireless Pet PIR Bosch RFPR-12 RADION Wireless Pet PIR — Australian Stock & 3-Year Warranty The Bosch RFPR-12 (BOSRFPR-12 / F.01U.389.907) is a RADION 433 MHz wireless pet-friendly PIR that adds cable-free motion detection to your Bosch alarm. Covering a 12 x 12 m area with pet immunity, it lets you protect a room without triggering false alarms from a household pet. Fully supervised for low-battery, cover-tamper and removal conditions, it runs up to five years on a single user-replaceable CR123A battery. The RFPR-12 requires a Bosch B810 RADION receiver (or RFRC-STR2) on the alarm panel. Backed by a 3-year Australian warranty. Coverage 12 x 12 m Signal 433.42 MHz Battery CR123A, ~5yr Pet Immunity Yes Pet-Friendly Pet immunity ignores a household pet while still detecting human intruders across the room. Fully Wireless RADION 433 MHz communication means no cabling — ideal for retrofits and hard-to-wire rooms. Up to 5-Year Battery Runs up to five years on one user-replaceable CR123A lithium battery. Supervised Security Monitored for low battery, cover tamper and removal from the mounting surface. Technical Specifications Model / SKU Bosch RFPR-12 (BOSRFPR-12) Product No. F.01U.389.907 Series RADION (wireless) Detection Pattern 12 x 12 m, pet-friendly Wireless Frequency 433.42 MHz Battery 1x CR123A lithium (3.3 V) Battery Life Up to 5 years Supervision Low battery, cover & removal tamper Receiver Required Bosch B810 / RFRC-STR2 Operating Temperature -10 – 40 °C Dimensions (H x W x D) 111 x 60 x 43 mm Warranty 3 Years (Australia) Downloads RFPR-12 Datasheet Bosch RADION PIR Quick Start Guide Bosch RADION PIR User Manual Frequently Asked Questions What receiver does the RFPR-12 need?It requires a Bosch B810 RADION receiver (or RFRC-STR2) connected to your Solution 2000/3000/6000 or compatible panel. How does pet immunity work?The optics and processing are tuned to ignore a typical household pet at floor level while still detecting a standing person. What battery does it use and how long does it last?One user-replaceable CR123A lithium battery, lasting up to five years. Is it wired or wireless?Fully wireless — it communicates on 433.42 MHz RADION with no cabling to the panel. What is in the box?The detector, a CR123A battery, an installation guide and a hardware pack. Is tamper protection included?Yes — it is supervised for low battery, cover tamper and removal from its mounting surface. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $132.00 $82.00

• 

  Bosch Bosch ISC-PDL1-W18G — Pro Series Hardwired Pet-Friendly TriTech PIR Motion Sensor (18m)

  Pro Series · TriTech MW+PIR · Pet-Friendly · Hardwired Pro TriTech PIR ISC-PDL1-W18G Pro Series TriTech Pet-Friendly PIR — Australian Stock & 3-Year Warranty The Bosch ISC-PDL1-W18G is a hardwired Pro Series TriTech motion detector that combines microwave (10.525 GHz) and passive infrared sensing with Tri-focus optics for exceptional false-alarm immunity. Both detection technologies must agree before an alarm is triggered, making it far more resistant to drafts, heat and stray movement than a standard PIR. It reliably ignores pets up to 4.5 kg and offers field-selectable coverage of 18 x 25 m or a focused 8 x 10 m short range. Ideal for Bosch Solution 2000, 3000 and 6000 systems, it ships with a 3-year Australian warranty. Coverage 18 x 25m Technology MW + PIR Pet Immunity Up to 4.5kg Power 9-15VDC Dual-Tech Verification Microwave (10.525 GHz) and PIR sensing must both agree before an alarm is raised, dramatically reducing false alarms in demanding environments. Tri-Focus Optics Three-zone optical system with Sensor Data Fusion delivers sharp, dependable catch performance across the full field of view. True Pet Immunity Reliably ignores pets up to 4.5 kg so cats and small dogs can move freely without triggering the alarm. Selectable Coverage Choose a wide 18 x 25 m pattern or a focused 8 x 10 m short range to match the protected space. Technical Specifications Model / SKU Bosch ISC-PDL1-W18G Series Pro Series Sensor Type TriTech (Microwave + PIR), Tri-Focus optics Microwave Frequency 10.525 GHz Pet Immunity Up to 4.5 kg Coverage 18 x 25 m, or 8 x 10 m field selectable Outputs 1x N/C alarm output (dry), tamper N/C Power Supply 9-15 VDC Mount Height 2 m - 3 m Housing Plastic, wall mount Ingress / Impact IP41 / IK04 Dimensions (H x W x D) 136 x 69 x 58 mm Warranty 3 Years (Australia) Downloads ISC-PDL1-W18G Datasheet Bosch PIR Sensor Quick Start Guide Bosch PIR Sensor User Manual Frequently Asked Questions What is the difference between a PIR and a TriTech detector?A standard PIR uses infrared only. The TriTech ISC-PDL1-W18G adds microwave sensing (10.525 GHz); both technologies must agree before an alarm triggers, giving much stronger false-alarm immunity. Will it ignore my pets?Yes. It offers reliable pet immunity for animals up to 4.5 kg, so cats and small dogs won't trigger false alarms while genuine intruders are still detected. What height should it be mounted at?Install the detector on a wall between 2 m and 3 m high for correct coverage and pet immunity. How is it wired and powered?It is hardwired and runs on 9-15 VDC, providing one N/C dry alarm output plus an N/C tamper contact for connection to your panel's zone inputs. Which alarm panels is it compatible with?It works with any conventional hardwired panel and pairs perfectly with Bosch Solution 2000, 3000 and 6000 control panels. What area does it cover?Coverage is field-selectable between a wide 18 x 25 m pattern and a focused 8 x 10 m short range. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $119.00

• 

  Ubiquiti Ubiquiti UCG-Fiber UniFi Cloud Gateway Fiber – 10G Desktop Gateway, 5 Gbps IDS/IPS, Dual 10G WAN & NVMe NVR

  UniFi — NDAA Compliant UniFi Cloud Gateway Fiber (UCG-Fiber) — 10G Desktop UniFi Gateway with 5 Gbps IDS/IPS, Dual 10G WAN & NVMe NVR The UniFi Cloud Gateway Fiber (UCG-Fiber) is Ubiquiti’s most capable compact desktop gateway — purpose-built for fibre-to-the-premises (FTTP) networks and high-performance UniFi deployments anywhere in Australia. It pairs a 10G SFP+ and 10 GbE RJ45 WAN, a second 10G SFP+ port, and 4 × 2.5 GbE switch ports (one PoE+) with 5 Gbps IDS/IPS routing and a selectable NVMe SSD slot (up to 2 TB) for built-in UniFi Protect NVR recording. Running the full UniFi application suite locally with no monthly fees, it delivers enterprise-grade security, routing, and camera recording in a 675 g desktop form factor. Genuine Ubiquiti stock, NDAA compliant, with fast Australia-wide shipping. IDS/IPS 5 Gbps WAN 10G SFP+ & 10G RJ45 NVR Storage NVMe up to 2 TB Compliance NDAA Why Choose the UniFi Cloud Gateway Fiber? 5 Gbps IDS/IPS Throughput The UCG-Fiber delivers 5 Gbps IDS/IPS throughput in a compact desktop form factor — with 55,000+ threat signatures available through CyberSecure. Ideal for high-speed FTTP connections where security cannot bottleneck throughput. 10G SFP+ & 10 GbE RJ45 WAN Default dual-WAN with one 10G SFP+ for fibre ISP connections and one 10 GbE RJ45 for copper — enabling multi-WAN load balancing and failover, expandable to up to 6 WAN ports. Second 10G SFP+ Port A second 10G SFP+ port connects to a core switch or second uplink at full 10G speed — ensuring the gateway never bottlenecks your internal network even on multi-gig fibre connections. 4 × 2.5 GbE Switch Ports (incl. PoE+) Built-in 4-port 2.5 GbE switch with one PoE+ port (30 W budget) — power a UniFi AP, camera, or VoIP phone directly from the UCG-Fiber without a separate switch. NVMe SSD Slot — UniFi Protect NVR Built In A selectable NVMe SSD slot (up to 2 TB, sold separately) enables full UniFi Protect NVR recording locally — managing up to (15) HD, (8) 2K, or (5) 4K cameras with no separate NVR device required. Full UniFi Application Suite Runs Network, Protect, Access, Talk, and Connect locally with a built-in controller — managing 50+ UniFi devices, 50 Access hubs, and 500+ simultaneous clients with no separate Cloud Key required. NDAA Compliant Fully NDAA compliant — suitable for government, defence, education, and security-sensitive installations where supply-chain compliance is mandatory. Compact Desktop — No Rack Required At just 675 g without an SSD with a 0.96″ status display, the UCG-Fiber sits on any desk, shelf, or small comms cabinet — no rack space required for 10G enterprise-grade gateway performance. UCG-Fiber vs UXG-Max vs UDM-Pro — Which Should You Choose? Choose UCG-Fiber if you need… Dual 10G WAN for FTTP fibre connections, 5 Gbps IDS/IPS, NVMe NVR storage, and NDAA compliance in a compact desktop form factor. Best for high-speed fibre sites and security-sensitive deployments. Choose UXG-Max if you need… A gateway-only device with 2.5G ports for standard NBN/fibre connections. Best for sites that already have a separate controller and don’t need NVMe NVR storage. Choose UDM-Pro if you need… An all-in-one rack-mount console with built-in controller, HDD NVR bay, and 10G SFP+. Best for deployments that want everything in one rack unit. Choose UDM-Pro-Max if you need… Maximum enterprise capacity — more managed devices, dual HDD RAID NVR, and 5 Gbps IPS — for large campus and enterprise deployments. Ideal Use Cases High-Speed FTTP Business Networks Offices and businesses on 1 Gbps+ FTTP fibre connections that need dual 10G WAN, 5 Gbps IDS/IPS, and NVMe NVR in a compact desktop device. Government & Education NDAA-compliant gateway for government agencies, schools, and universities requiring supply-chain compliance alongside enterprise-grade routing and security. UniFi Protect Camera Systems Add an NVMe SSD (up to 2 TB) to enable full UniFi Protect NVR recording locally — no separate UNVR required for small to medium camera deployments. Multi-WAN & ISP Redundancy Sites requiring WAN failover and load balancing across multiple ISP connections — the UCG-Fiber supports up to 6 WAN ports with automatic failover. Technical Specifications Model UCG-Fiber Processor Quad-core ARM® Cortex®-A73 @ 2.2 GHz System Memory 3 GB NVR Storage Selectable NVMe SSD up to 2 TB (sold separately) Default WAN Ports 1 × 10G SFP+ • 1 × 10 GbE RJ45 (up to 6 WAN max) Port Layout 2 × 10G SFP+ • 1 × 10 GbE RJ45 • 4 × 2.5 GbE RJ45 (1 × PoE+) PoE Budget 30 W (PoE mode 50–57 V) IDS/IPS Throughput 5 Gbps • 55,000+ signatures with CyberSecure UniFi Application Suite Network, Protect, Access, Talk, Connect Managed Devices / Clients 50+ UniFi devices • 50 Access hubs • 500+ clients Managed Cameras (15) HD • (8) 2K • (5) 4K Max Power Consumption 29.4 W (excluding PoE output) Power Supply 54 V DC / 1.1 A adapter included (100–240 V AC input) Display 0.96″ status display Dimensions / Weight 212.8 × 127.6 × 30 mm • 675 g (734 g with SSD) Enclosure Polycarbonate Operating Temperature 0°C to 40°C • 5–95% non-condensing Certifications CE, FCC, IC, SRRC, Anatel Compliance NDAA compliant What’s in the Box UCG-Fiber Unit Compact desktop 10G UniFi Cloud Gateway with dual 10G WAN, second 10G SFP+, and 4 × 2.5 GbE switch. Power Adapter 54 V DC / 1.1 A power adapter included (100–240 V AC input). Quick-Start Guide Installation guide and documentation included. NVMe SSD Not Included An NVMe SSD (up to 2 TB) is required for UniFi Protect NVR recording. Sold separately. Frequently Asked Questions Does the UCG-Fiber require a subscription? No. UniFi Network and UniFi Protect run fully locally on the UCG-Fiber. There are no monthly fees or cloud subscriptions required for full functionality. What NVMe SSD is compatible? The UCG-Fiber accepts a selectable NVMe SSD up to 2 TB. Ubiquiti recommends a high-endurance NVMe SSD for 24/7 UniFi Protect recording workloads. Does it support dual-WAN failover? Yes. The UCG-Fiber supports multi-WAN load balancing and failover across the 10G SFP+ and 10 GbE RJ45 WAN ports, expandable to up to 6 WAN ports. Is it NDAA compliant? Yes. The UCG-Fiber is fully NDAA compliant — suitable for government, defence, education, and security-sensitive installations. Does it work as a standalone router? Yes. The UCG-Fiber is a UniFi Cloud Gateway with a built-in controller — it does not require a separate Cloud Key or UniFi OS Console. It manages itself and connected UniFi devices directly. How many cameras can it record? With an NVMe SSD installed, UniFi Protect supports up to (15) HD, (8) 2K, or (5) 4K cameras directly on the UCG-Fiber. Downloads & Resources UCG-Fiber Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $627.65

• Save $22.88

  Ubiquiti Ubiquiti UniFi Flex 2.5G PoE Switch — 8-Port 2.5GbE PoE++ Managed (USW-Flex-2.5G-8-PoE)

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Flex 2.5G PoE — 8-Port 2.5GbE PoE++ Managed Switch (USW-Flex-2.5G-8-PoE) The UniFi Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) is a compact, fanless Layer 2 managed switch built for high-performance multi-gigabit networks. It delivers eight 2.5 GbE RJ45 ports — all PoE++ capable — plus a 10 GbE RJ45/SFP+ combination uplink, so you can power and connect access points, cameras, and IP phones from a single silent unit. Powered by a PoE+++ uplink or the optional 210W AC adapter, and managed entirely through UniFi Network with no monthly fees, it suits homes, offices, retail, and smart-building sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 8 × 2.5GbE PoE PoE++ on All Ports Uplink 10G RJ45 / SFP+ Cooling Fanless / Silent Why Choose the UniFi Flex 2.5G PoE? 8 × 2.5 GbE PoE++ Ports Every one of the eight 2.5 GbE RJ45 ports supports PoE++ (up to 64W per port by PSE) — ready to power Wi-Fi 7 access points, cameras, and multi-gig devices without a separate injector. 10 GbE Combination Uplink A flexible 10 GbE RJ45 / 10G SFP+ combo uplink gives you a fast, future-proof link back to your core network over copper or fibre. Flexible Powering Run it from the included-capable 210W AC adapter (excluded) for up to 196W of PoE, or power the entire switch from a single PoE+++ uplink for compact, cable-light deployments. Fanless, Silent Operation A passively cooled polycarbonate chassis runs completely silently — ideal for studios, meeting rooms, retail counters, and other noise-sensitive spaces. Versatile Mounting Compact desktop form factor with wall, DIN-rail, and magnetic mounting options, so it fits neatly into cabinets, comms cupboards, and tight installs. UniFi Network — No Subscription Fully managed through the UniFi Network application with VLANs, port mirroring, storm control, and more — local control with no monthly fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex-2.5G-8-PoE (UniFi Flex 2.5G PoE) 2.5 GbE RJ45 Ports 8 (all PoE++) — 2.5G / 1G / 100M / 10M 10 GbE RJ45 Uplink 1 (PoE+++ input) — 10G / 5G / 2.5G / 1G / 100M 10G SFP+ Uplink 1 — 10G / 1G Max. PoE Output Up to PoE++ (64W per port by PSE) Total PoE Availability 210W AC adapter: 196W • PoE+++ input: 76W • PoE++ input: 46W • PoE+ input: 16W Switching Capacity 60 Gbps Non-Blocking Throughput 30 Gbps Forwarding Rate 45 Mpps VLANs / MAC Table 256 VLANs • 4,000 MAC addresses Layer 2 Features STP & RSTP, egress rate limit, flow control, storm control, port isolation, port mirroring, jumbo frames, loop protection Power Method (1) AC/DC adapter (excluded) • (1) PoE+++ Supported Voltage 50–57V DC / PoE Max. Power Consumption 14W (PoE input, excl. PoE output) • 210W including PoE output Cooling Fanless (silent) Management UniFi Network 9.0.114 and later Mounting Compact desktop, wall, DIN, magnetic Enclosure Polycarbonate Dimensions / Weight 212.9 × 99.4 × 33.5 mm • 567 g Operating Temperature −20°C to 45°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Flex-2.5G-8-PoE Tech Specs Ubiquiti Installation Guide Best For Homes & Smart Spaces Multi-gig speed to power Wi-Fi 7 APs and cameras from one silent, compact switch. Offices & Retail PoE++ on every port for phones, APs, and displays with a fast 10G uplink to the core. Comms Cabinets Wall, DIN-rail, and magnetic mounting fit neatly into tight racks and cupboards. PoE-Powered Installs Run the whole switch from a single PoE+++ uplink for cable-light deployments. Adopt and manage with the UniFi Network application (version 9.0.114 or later) on a UniFi Gateway, Cloud Key, or self-hosted controller. Power from the optional 210W AC adapter (excluded) for up to 196W of PoE, or from an upstream PoE+++ source via the 10 GbE uplink. Use the 10 GbE RJ45 or 10G SFP+ combo uplink for a high-speed link back to your aggregation switch or gateway. Mounts to desk, wall, DIN-rail, or magnetic surface out of the box. Frequently Asked Questions How many PoE ports does it have? All eight 2.5 GbE RJ45 ports support PoE++, delivering up to 64W per port (by PSE) for power-hungry access points and cameras. Does it include a power adapter? The 210W AC adapter is sold separately. You can also power the entire switch from a single PoE+++ uplink connection. What uplink options are available? A combination 10 GbE RJ45 / 10G SFP+ uplink lets you connect over copper or fibre at up to 10 Gbps. Do I need a subscription to manage it? No. It is managed through the UniFi Network application with no monthly fees — full local control. Is the Flex 2.5G PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $503.00 $480.12

• Save $20

  Ubiquiti Ubiquiti UniFi AC Adapter 210W — UACC-Adapter-AC-210W PoE Switch Power Supply

  UniFi — NDAA Compliant UniFi AC Adapter 210W — 54V DC PoE Switch Power Supply (UACC-Adapter-AC-210W) The Ubiquiti UniFi AC Adapter 210W (UACC-Adapter-AC-210W) is the genuine replacement power supply for UniFi switches and devices that use an external 54 V DC input. It delivers a full 210 W from 100–240 V AC mains, with a standard C14 inlet and a 1.5 m DC output lead — perfect for restoring a lost or damaged adapter, or keeping a spare on hand. Genuine Ubiquiti stock with fast Australia-wide shipping. 210 W at 54 V DC Supplies a full 210 W output at 54 V DC to power compatible UniFi PoE switches and devices. Universal AC Input Works on 100–240 V AC mains with a standard C14 inlet — use your own region's IEC power lead. 1.5 m DC Output Lead A UL11353 16 AWG cable with a 5.5 × 2.1 mm DC plug gives flexible placement near your switch or rack. Genuine Ubiquiti Spare An authentic factory replacement or spare adapter for compatible UniFi switches that accept a 54 V DC supply. Technical Specifications Model UACC-Adapter-AC-210W (UniFi AC Adapter 210W) Output Power 210 W Input Voltage 100–240 V AC Output Voltage 54 V DC AC Connector C14 inlet (input) Output Plug DC plug 5.5 × 2.1 × 11.5 mm DC Cable UL11353 16 AWG, 1.5 m (4.9 ft) Dimensions 190 × 86 × 26 mm Weight 1.2 kg Operating Temperature 0 to 40°C, 10–90% non-condensing Compliance NDAA compliant Downloads & Resources UACC-Adapter-AC-210W Datasheet Ubiquiti AC Adapter Quick Start Guide Powers compatible UniFi switches/devices that accept an external 54 V DC supply (e.g. UniFi Flex 2.5G 8 PoE) — check your device's required adapter before purchase. Supply your own IEC C13-to-AU mains lead for the C14 inlet. Indoor use, 0–40°C operating range. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $209.00 $189.00

• 

  Ubiquiti Ubiquiti USW-Flex-Utility — Outdoor Weatherproof Enclosure for UniFi Switch Flex

  UniFi Accessory — NDAA Compliant Ubiquiti USW-Flex-Utility — Outdoor Weatherproof Enclosure for UniFi Switch Flex The USW Flex Utility (USW-Flex-Utility) is an outdoor, weatherproof enclosure purpose-built for the UniFi Switch Flex (USW-Flex). It ships with an Ethernet patch cable and a 60W PoE adapter that delivers a maximum PoE budget of 46W, so your Flex switch can power cameras and access points at an exposed outdoor location. Easily pole-mounted with clean cable management and a screw lock for added security, it is the simple way to take a UniFi Switch Flex outdoors. Genuine Ubiquiti stock with fast Australia-wide shipping. Outdoor Weatherproof Housing A rugged enclosure that lets you deploy the UniFi Switch Flex at exposed outdoor locations across tough Australian conditions. 60W PoE Adapter Included Ships with a 54V 60W PoE adapter and an Ethernet patch cable, providing a maximum PoE budget of 46W for your Flex switch. Easy Pole Mounting Mounts quickly to a pole with clean cable management and a screw lock for physical security. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations. Technical Specifications Model USW-Flex-Utility Compatible Switch UniFi Switch Flex (USW-Flex) In the Box Outdoor enclosure, 60W PoE adapter, Ethernet patch cable Max PoE Budget 46W (powered by included 60W PoE adapter) PoE Adapter Output 54V DC, 1.11A • rated 100–240V AC input Enclosure Dimensions (with mount) 249 × 218 × 60 mm Enclosure Weight (with mount) 740 g PoE Adapter Dimensions 118.5 × 63 × 34.7 mm • 206 g Mounting Pole mount with screw lock and cable management Operating Temperature −20 to 60°C (adapter); 5–90% non-condensing humidity Compliance NDAA compliant Downloads & Resources USW-Flex / USW-Flex-Utility Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $103.53

• 

  Ubiquiti Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch The Ubiquiti UniFi Switch Flex (USW-Flex) is a compact, weatherproof 5-port Layer 2 managed Gigabit switch built to extend your network and PoE devices to places a normal switch can't go. It draws all its power over a single PoE++ uplink, then redistributes up to 46 W of PoE+ across four ports — perfect for powering UniFi cameras, access points, and IoT devices outdoors or in tight spaces. Fully managed through the UniFi Network application, it's ideal for homes, offices, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5 × GbE PoE Budget 46 W PoE+ Build Outdoor-Ready Management UniFi Network Why Choose the UniFi Switch Flex? Powered Entirely Over PoE++ No power brick at the switch — the USW-Flex is powered by a single PoE++ uplink or a 60 W PoE adapter, so you can place it almost anywhere a network cable reaches. 46 W of PoE+ Output When fed by a PoE++ source, four GbE ports deliver up to 46 W total (25 W max per port), enough to run UniFi cameras, access points, and other PoE devices downstream. Outdoor-Ready Design A rugged polycarbonate enclosure operates from −40°C to 65°C and 5–95% humidity, making it suitable for sheltered outdoor and demanding Australian environments. Full Layer 2 Management VLANs, port isolation, port mirroring, flow control, jumbo frames, and egress rate limiting — all configured through the UniFi Network application with no per-device licensing. Flexible Mounting Compact 122.5 × 107.1 mm form factor mounts on a desk, wall, or pole, letting you bring switching and PoE exactly where it's needed. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex Networking Interface (5) GbE RJ45 ports (1G / 100M / 10M) PoE Ports 4 × PoE+ output • 1 × PoE++ input Total Available PoE 46 W (PoE++ / 60 W adapter input) • 20 W (PoE+ input) • 8 W (PoE input) Max. PoE per Port 25 W (PoE+) Switching Capacity 10 Gbps Non-Blocking Throughput 5 Gbps Forwarding Rate 7 Mpps Supported VLANs 1,000 MAC Address Table 2,000 Layer 2 Features Egress rate limit, flow control, port isolation, port mirroring, jumbo frames Power Method PoE++ • 50–57V DC supported range Max. Power Consumption 5 W (excluding PoE output) Management UniFi Network application (Version 5.10.3 and later) Enclosure Polycarbonate • outdoor-ready Mounting Compact desktop, wall, pole ESD Protection Air / contact: ±16 kV Operating Temperature −40°C to 55°C (46 W PoE) • −40°C to 65°C (25 W PoE) Operating Humidity 5 to 95% non-condensing Dimensions / Weight 122.5 × 107.1 × 28 mm • 230 g Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Flex Datasheet Ubiquiti Installation Guide What's in the Box UniFi Switch Flex (USW-Flex) The 5-port outdoor-ready managed PoE++ switch. Mounting Hardware Brackets and screws for desk, wall, or pole installation. Documentation Quick-start guide and installation instructions. Not Included A PoE++ switch or 60 W PoE adapter is required to power the unit and unlock the full 46 W PoE budget (sold separately). Best For Outdoor Camera Clusters Power and connect several UniFi cameras from one PoE++ uplink at the far end of a run. Remote Access Points Extend wired backhaul and PoE to APs in sheds, gates, and outbuildings. Desk & Edge Expansion Add managed ports to a desk or AV rack without running a new power circuit. IoT & Smart Sites Segment and power IoT devices with VLANs and port isolation on the network edge. Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application 5.10.3 or later. Power the switch with a PoE++ source or 60 W PoE adapter to access the full 46 W downstream PoE budget. Lower-power inputs still work: PoE+ input gives 20 W and standard PoE input gives 8 W of downstream PoE. Mounts to desk, wall, or pole; suited to sheltered outdoor placements within its rated temperature range. Frequently Asked Questions How is the USW-Flex powered? Entirely over its PoE input port. Use a PoE++ switch or a 60 W PoE adapter to get the full 46 W of downstream PoE; PoE+ and standard PoE inputs work too, with smaller budgets. How much PoE can it deliver to my devices? Up to 46 W total across four PoE+ ports (25 W max per port) when fed by a PoE++ source — enough for UniFi cameras, access points, and IoT devices. Can it be used outdoors in Australia? Yes. It's outdoor-ready with a polycarbonate enclosure rated from −40°C to 65°C and 5–95% humidity, suiting sheltered outdoor and harsh Australian conditions. Do I need a controller to manage it? Yes. The USW-Flex is managed through the UniFi Network application running on a UniFi Cloud Gateway, Dream Machine, or Cloud Key — there are no per-device licence fees. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $209.00

• 

  Ubiquiti Ubiquiti R2AC-PRISM Rocket Prism 2AC — 2.4GHz airMAX ac BaseStation

  airMAX ac BaseStation — NDAA Compliant Ubiquiti Rocket Prism 2AC — 2.4 GHz airMAX ac BaseStation (R2AC-PRISM) The Ubiquiti Rocket Prism 2AC (R2AC-PRISM) is a carrier-class 2.4 GHz BaseStation radio combining the proprietary airMAX ac chipset with airPrism RF filtering for maximum performance in high-density, RF-noisy environments. Deploy it for Point-to-Point (PtP) backhauls or Point-to-MultiPoint (PtMP) distribution networks across Australia — pair it with a RocketDish for PtP links or an airMAX Sector antenna for PtMP coverage. Genuine Ubiquiti stock with fast Australia-wide shipping. Band 2.4 GHz Technology airMAX ac + airPrism Interface Gigabit RJ45 Build Die-Cast Alloy Why Choose the Rocket Prism 2AC? airMAX ac Performance Ubiquiti's proprietary airMAX ac chipset delivers high throughput, low latency, and scalability for demanding PtP and PtMP wireless networks — built from the ground up for ISP-grade deployments. airPrism RF Filtering Integrated airPrism active RF filtering rejects interference and isolates signals in high-density, co-located tower sites — letting you stack more radios without performance loss. Full 2.4 GHz Coverage A single radio delivers complete coverage of the 2.4 GHz spectrum (2412–2472 MHz worldwide) with flexible channel-bandwidth configuration, subject to local Australian regulations. Dedicated Management Radio A separate 5 GHz management radio keeps configuration and monitoring traffic off the data link, simplifying remote administration of tower sites. Rugged Outdoor Build A die-cast aluminium enclosure, ESD/EMP protection to ±24 kV, and a wide −40°C to 80°C operating range keep links online through tough Australian conditions. Pairs With airMAX Antennas Dual RP-SMA waterproof connectors plus a GPS port let you pair the Rocket with a RocketDish for PtP backhauls or an airMAX Sector for PtMP — with GPS-synced timing. NDAA Compliant Fully NDAA Section 889 compliant and US-manufactured by Ubiquiti — suitable for government, defence, and security-sensitive Australian installations. Technical Specifications Model R2AC-PRISM (Rocket Prism 2AC) Frequency Band 2.4 GHz airMAX ac Operating Frequency Worldwide: 2412–2472 MHz • US/CA: 2412–2462 MHz Management Radio Worldwide: 5150–5250 MHz • US/CA: U-NII-3 5725–5850 MHz Technology airMAX ac chipset + airPrism active RF filtering Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24V, 0.5A gigabit PoE adapter (included) Supported Voltage Range 20–27V DC Max. Power Consumption 9.5 W RF Connectors (2) RP-SMA (waterproof) • (1) GPS (waterproof) LEDs Power, LAN, (4) signal strength ESD / EMP Protection Air/contact ±24 kV Shock & Vibration ETSI 300-019-1.4 Enclosure Material Die-cast aluminium Dimensions 88 × 40 × 230 mm Weight 400 g Operating Temperature −40°C to 80°C Operating Humidity 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources R2AC-PRISM Tech Specs & Datasheet Ubiquiti Downloads & Quick Start Guides Best For PtP Backhauls Pair with a RocketDish for high-throughput point-to-point links between sites and towers. PtMP Distribution Pair with an airMAX Sector to serve many subscriber CPEs from a single base station. WISP & ISP Networks airPrism filtering lets you co-locate radios on dense tower sites without interference. Rural & Regional Links 2.4 GHz reach and rugged build suit long-range links across regional Australia. Mounts to any compatible airMAX antenna with a Rocket mount (RP-SMA dual-polarity). Powered by the included 24V passive gigabit PoE adapter — no separate power run required. Configured and managed via airOS; a dedicated 5 GHz management radio keeps admin traffic separate. Channel bandwidth is configurable subject to ACMA / local Australian spectrum regulations. Frequently Asked Questions What is airPrism technology? airPrism is Ubiquiti's active RF filtering that isolates and rejects interference, allowing multiple radios to be co-located on dense tower sites without degrading performance. Does the Rocket Prism 2AC include an antenna? No. The Rocket is the radio only. Pair it with a RocketDish (PtP) or an airMAX Sector antenna (PtMP), sold separately, via its dual RP-SMA connectors. Is a power supply included? Yes. A 24V, 0.5A gigabit passive PoE adapter is included in the box to power the radio over a single Ethernet cable. Is it suitable for outdoor use in Australia? Yes. The die-cast aluminium enclosure, ±24 kV ESD/EMP protection, and −40°C to 80°C range suit demanding Australian outdoor tower and rooftop installs. Is the R2AC-PRISM NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the Rocket Prism 2AC is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $399.00

• 

  Ubiquiti Ubiquiti NanoStation M2 (NSM2) airMAX 2.4 GHz Outdoor CPE Antenna

  airMAX CPE — NDAA Compliant Ubiquiti NanoStation M2 — airMAX 2.4 GHz Outdoor CPE Antenna (NSM2) The Ubiquiti NanoStation M2 (NSM2) is a compact, all-in-one airMAX 2.4 GHz outdoor CPE with an integrated dual-polarity antenna, ideal for point-to-multipoint links, wireless bridging, and extending coverage across sites, farms, and remote buildings. Its UV-stabilised weatherproof enclosure, included pole-mount kit, and 24V PoE adapter make for a fast outdoor install. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Integrated airMAX Antenna Built-in dual-linear 2.4 GHz antenna delivering 10.4–11.2 dBi gain with 23 dB minimum cross-pol isolation for reliable long-range links. Outdoor-Ready Build UV-stabilised plastic enclosure rated for −30°C to 75°C with an included pole-mount kit for quick deployment in Australian conditions. Dual Ethernet + PoE Two 10/100 RJ45 ports and a bundled 24V PoE adapter power and connect the unit over a single cable run — just 5.5W max draw. Technical Specifications Model NanoStation M2 (NSM2) Frequency 2.4 GHz • 2412–2462 MHz Antenna Gain 10.4–11.2 dBi Cross-pol Isolation 23 dB min Polarization Dual linear Beamwidth 55° (H-pol) / 53° (V-pol) / 27° (elevation) Networking (2) 10/100 MbE RJ45 ports Power Method Passive PoE 2-pair • 24V 0.5A adapter included • 22–27V DC Max Power Consumption 5.5 W Enclosure Outdoor UV-stabilized plastic • pole-mount kit included Dimensions / Weight 294 × 31 × 80 mm • 400 g Operating Temperature −30°C to 75°C • 5–95% non-condensing Certifications FCC, IC, CE, RoHS Compliance NDAA Compliant Downloads & Resources NanoStation M2 Tech Specs Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $190.24

• 

  Ubiquiti Ubiquiti UniFi USW-16-POE Standard 16 PoE Switch — 16-Port Gigabit, 8x PoE+, 2x SFP, 42W, Fanless

  UniFi — NDAA Compliant Ubiquiti UniFi USW-16-POE — 16-Port Gigabit Managed PoE+ Switch (Standard 16 PoE) The Ubiquiti UniFi USW-16-POE (UniFi Standard 16 PoE) is a 16-port Layer 2 managed Gigabit switch with eight PoE+ ports, two 1G SFP uplinks, and a silent fanless design — ideal for powering UniFi access points, cameras, and other PoE devices from a single rack-mounted unit. With a built-in 1.3″ touchscreen display, a 36 Gbps switching capacity, and full UniFi Network integration, it is a clean backbone for homes, offices, and small commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x GbE + 2x SFP PoE 8x PoE+ • 42W Capacity 36 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-16-POE? 16 Gigabit Ports + 2 SFP Uplinks Sixteen GbE RJ45 ports (10/100/1000) plus two 1G SFP uplink slots give you plenty of wired connectivity and fibre-ready uplinks for connecting to a core switch or gateway. 8x PoE+ — 42W Total Budget Eight ports deliver PoE/PoE+ up to 32W per port with a 42W total PoE budget — enough to power UniFi access points, cameras, and other PoE devices over a single cable. Silent Fanless Cooling A passive, fanless cooling system keeps the switch completely silent — perfect for offices, studios, and any space where noise matters. 1.3″ Touchscreen Display An on-device 1.3″ touchscreen shows port status, throughput, and device info at a glance — no need to open a laptop for quick checks. Layer 2 Managed — Full UniFi Control Manage VLANs, LACP, STP/RSTP, port isolation, 802.1X, ACLs, and more through UniFi Network — enterprise switching features in a single pane of glass. 1U Rack Mount — SGCC Steel A rugged SGCC steel 1U enclosure with included rack brackets fits standard server racks and supports 400–1200 mm rack depths. 36 Gbps Switching Capacity With 18 Gbps non-blocking throughput and a 36 Gbps switching capacity, the USW-16-POE handles busy networks without bottlenecks. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-16-POE (UniFi Standard 16 PoE) Networking Interface (16) GbE RJ45 (10/100/1000) • (2) 1G SFP PoE Ports (8) PoE/PoE+ Max. PoE per Port PoE: 15.4W • PoE+: 32W Total PoE Availability 42W Switching Capacity 36 Gbps Non-Blocking Throughput 18 Gbps Forwarding Rate 27 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer Layer 2 managed Display 1.3″ touchscreen (LCM) Power Method Universal input, 100–240V AC, 50/60 Hz Power Supply AC/DC, internal, 60W Max. Power Consumption 18W (excl. PoE) • 60W (incl. PoE output) Cooling Fanless / passive Form Factor Rack mount (1U) Enclosure SGCC steel Dimensions 442 × 200 × 44 mm Weight 2.8 kg (2.9 kg with brackets) Operating Temperature −5°C to 40°C, 10–90% non-condensing Application Requirements UniFi Network 7.2.94 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-16-POE Datasheet USW-16-POE Installation Guide What's in the Box UniFi USW-16-POE Switch The 16-port Standard 16 PoE managed switch with fanless cooling. Rack-Mount Brackets 1U rack-mount brackets and mounting hardware included. Power Cable AC power cable for the internal 60W power supply. Not Included SFP modules and network cables are sold separately. Best For Homes & Studios Silent fanless operation makes it ideal for living spaces, home offices, and recording studios. Offices & SMBs Power UniFi APs and IP phones over PoE+ while managing VLANs and security from UniFi Network. UniFi Camera Sites Run UniFi Protect cameras on PoE+ with a clean rack-mounted backbone. Server Racks 1U SGCC steel chassis with included brackets fits standard 19″ racks. Requires a UniFi Network host (Cloud Gateway, Dream Machine, Cloud Key, or self-hosted) running UniFi Network 7.2.94 or later for full management. Eight PoE+ ports share a 42W total PoE budget — plan device power draw accordingly. Use the two 1G SFP ports for fibre or high-speed copper uplinks to a core switch or gateway. Mounts in a standard 1U rack space using the included SGCC steel brackets. Frequently Asked Questions How much PoE can the USW-16-POE deliver? It has eight PoE/PoE+ ports (up to 32W per port) sharing a 42W total PoE budget. The internal power supply is rated at 60W, which covers both the switch and PoE output. Is the USW-16-POE fanless? Yes. It uses a passive, fanless cooling system for completely silent operation — ideal for offices, studios, and quiet environments. Does it need a UniFi controller? For full management you need a UniFi Network host such as a Cloud Gateway, Dream Machine, or Cloud Key running UniFi Network 7.2.94 or later. What are the SFP ports for? The two 1G SFP ports provide fibre or high-speed copper uplinks to a core switch or gateway. SFP modules are sold separately. Is the USW-16-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-16-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Can I rack-mount it? Yes. It is a 1U rack-mount switch and ships with SGCC steel mounting brackets for standard 19″ racks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $685.89

• 

  Ubiquiti Ubiquiti UMA-D UniFi AC Mesh Dual-Band Directional Antenna

  UniFi Accessory — NDAA Compliant Ubiquiti UMA-D UniFi AC Mesh Dual-Band Directional Antenna The Ubiquiti UMA-D is a high-efficiency, dual-band directional mesh antenna designed to extend the range and shape the coverage of the UniFi AC Mesh access point (UAP-AC-M). Optimised for 802.11ac, it delivers 15 dBi gain on 5 GHz and 10 dBi on 2.4 GHz with dual-linear polarisation, housed in an outdoor UV-stabilised enclosure for indoor or outdoor use. A ball-joint mount allows precise aiming on a pole or wall. Genuine Ubiquiti stock with fast Australia-wide shipping. High Directional Gain 15 dBi at 5 GHz and 10 dBi at 2.4 GHz focuses signal where you need it, boosting range and link reliability for your UAP-AC-M. Dual-Band Coverage Shaping Supports 2.4–2.5 GHz and 5.1–5.9 GHz with a 45° (5 GHz) / 90° (2.4 GHz) beamwidth for customised pattern shaping. Weather-Resistant Build Encased in outdoor UV-stabilised plastic, the UMA-D is rated for indoor and outdoor installation in tough Australian conditions. Precise Ball-Joint Mounting The integrated ball-joint mount enables accurate pole or wall aiming, with two RP-SMA connectors for the UAP-AC-M. Technical Specifications Model UMA-D Compatibility UniFi AC Mesh AP (UAP-AC-M) Supported Frequency 2.4–2.5 GHz • 5.1–5.9 GHz Gain 15 dBi (5 GHz) • 10 dBi (2.4 GHz) Beamwidth (HPOL / VPOL / Elevation) 45° (5 GHz) • 90° (2.4 GHz) Polarisation Dual-linear Max VSWR 2:1 Cross-Pol Isolation 30 dB (5 GHz) • 25 dB (2.4 GHz) RF Connections (2) RP-SMA Enclosure Material Outdoor UV-stabilised plastic Mounting Ball-joint mount (pole or wall) Dimensions 201.3 × 128 × 32.5 mm Weight 400 g (without mount) • 480 g (with mount) Compliance NDAA compliant Certifications Anatel: 06187-19-08356 Downloads & Resources UMA-D Tech Specs UMA-D Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $191.53

• Save $61.82

  Ubiquiti Ubiquiti UniFi Pro 24 PoE — Managed 24-Port Gigabit Layer 3 PoE++ Switch (USW-Pro-24-POE)

  1 review

  UniFi Switching — NDAA Compliant UniFi Pro 24 PoE — Managed 24-Port Gigabit Layer 3 PoE++ Switch (USW-Pro-24-POE) The Ubiquiti UniFi Pro 24 PoE (USW-Pro-24-POE) is an enterprise-grade managed switch with 24 Gigabit RJ45 ports — 16 delivering 802.3af/at PoE+ and 8 delivering high-power 802.3bt PoE++ up to 64 W per port — plus dual 10G SFP+ uplinks and full Layer 3 routing. With a 400 W total PoE budget, an 88 Gbps switching capacity, and a built-in 1.3″ touchscreen, it powers and manages cameras, access points, VoIP phones, and IoT devices from a single pane of glass in UniFi Network. Genuine Ubiquiti stock with fast shipping right across Australia. Ports 24 × Gigabit PoE PoE Budget 400 W Total Uplinks 2 × 10G SFP+ Routing Layer 3 Why Choose the UniFi Pro 24 PoE? 24 Gigabit PoE Ports Sixteen 802.3af/at PoE+ ports plus eight 802.3bt PoE++ ports (up to 64 W each) power cameras, access points, phones, and IoT devices directly — no separate injectors required. 400 W Total PoE Budget A 450 W internal AC/DC power supply delivers a 400 W total PoE budget, comfortably running a mixed fleet of legacy PoE and high-power PoE++ devices at once. Dual 10G SFP+ Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC aggregation to your core network or storage server, with plenty of headroom for surveillance and multi-AP sites. Full Layer 3 Routing Beyond Layer 2 switching, the Pro 24 PoE adds inter-VLAN routing, static routing, DHCP server and DHCP relay — keeping traffic local and fast without a separate router. High-Performance Hardware An 88 Gbps switching capacity, 44 Gbps non-blocking throughput, 65 Mpps forwarding rate, and support for 1,000 VLANs handle demanding enterprise and surveillance LANs with ease. 1.3″ Touchscreen Display A built-in 1.3″ LCM touchscreen shows live status and port information for quick monitoring and troubleshooting right at the rack. Managed by UniFi Network Provision, monitor and configure everything — VLANs, PoE scheduling, LACP, QoS, 802.1X, port mirroring — from the UniFi Network controller or mobile app, no licence fees. Power Redundancy + NDAA A USP-RPS DC backup input guards against PSU failure, while full NDAA Section 889 compliance suits government, defence, and security-sensitive sites. Technical Specifications Model USW-Pro-24-POE (UniFi Pro 24 PoE) RJ45 Ports 24 × Gigabit (10/100/1000) — 16 × 802.3af/at PoE+, 8 × 802.3bt PoE++ SFP+ Uplinks 2 × 1/10G SFP+ Max PoE per Port PoE+ 30 W • PoE++ 64 W Total PoE Budget 400 W Switching Capacity 88 Gbps Non-Blocking Throughput 44 Gbps Forwarding Rate 65 Mpps Layer Layer 3 (inter-VLAN routing, static routing, DHCP server/relay) Supported VLANs 1,000 MAC Address Table 16,000 L2 Features LACP, STP/RSTP, QoS (DSCP), IGMP snooping, 802.1X, port mirroring, jumbo frames, storm control Display 1.3″ LCM touchscreen Power Supply AC/DC internal, 450 W • 100–240 V AC, 50/60 Hz Redundancy USP-RPS DC backup input Max Power Consumption 50 W (excluding PoE output) Form Factor 1U rack mount (brackets included) Enclosure SGCC steel Dimensions / Weight 442 × 285 × 44 mm • 4.3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing Management UniFi Network (v5.10.5 and later) & mobile app Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Pro-24-POE Datasheet Ubiquiti Installation Guide What's in the Box UniFi Pro 24 PoE Switch The USW-Pro-24-POE managed Layer 3 PoE++ switch in its 1U steel chassis. Rackmount Kit Rack-mount brackets and screws for a clean 1U install in any standard rack. Power Cord Mains power cord for the internal 450 W AC/DC power supply. Not Included SFP+ modules/DAC cables and a USP-RPS for power redundancy are sold separately. Best For CCTV & Surveillance Power and manage UniFi Protect cameras over a single cable with plenty of PoE headroom and 10G uplinks to the NVR. Offices & Campuses Drive access points, VoIP phones, and IoT across VLANs with Layer 3 routing keeping traffic local and fast. Smart Buildings High-power 802.3bt PoE++ runs PTZ cameras, displays, and access control without separate power runs. Edge Aggregation Dual 10G SFP+ uplinks aggregate downstream switches into the core for multi-service edge LANs. Adopt and manage through a UniFi Network host — Cloud Gateway, Cloud Key, or UniFi Network self-hosted (v5.10.5+). Mounts in any standard 1U rack space with the included brackets; supports 400–1200 mm rack depth. Use SFP+ DAC or fibre transceivers for 10G uplinks to your core or NVR (sold separately). Add a USP-RPS to the DC backup input for automatic power-supply failover (sold separately). Frequently Asked Questions What PoE standards does the USW-Pro-24-POE support? 16 ports deliver 802.3af/at PoE+ (up to 30 W) and 8 ports deliver 802.3bt PoE++ (up to 64 W), with a 400 W total PoE budget across all ports. Is this a Layer 3 switch? Yes. The Pro 24 PoE supports Layer 3 features including inter-VLAN routing, static routing, and DHCP server/relay, alongside full Layer 2 switching. How do I manage it? It's managed through UniFi Network (version 5.10.5 or later) via the controller or mobile app — no subscription or licence fees. What are the uplink options? Two 1/10G SFP+ ports allow high-speed fibre or DAC aggregation to your core network, storage server, or NVR. Does it support power redundancy? Yes. A USP-RPS DC backup input provides automatic failover if the internal 450 W power supply fails (USP-RPS sold separately). Is the Pro 24 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $1,629.00 $1,567.18

• 

  Ubiquiti Ubiquiti UniFi USW-24-POE Switch - 24-Port Gigabit, 16x PoE+, 2x SFP, 120W, Touch Display, Fanless (Gen2)

  UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2) The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x GbE + 2x SFP PoE+ 16 Ports • 95W Switching 52 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-24-POE? 24 Gigabit Ports + 2 SFP Uplinks Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network. 16x 802.3at PoE+ — 95W Total Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability. 52 Gbps Switching Capacity A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks. Silent Fanless Design A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters. 1.3″ Touchscreen Display An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks. Advanced Layer 2 Features Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control. UniFi Network Managed Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-24-POE (UniFi Standard 24 PoE, Gen2) Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port Total PoE Availability 95W Switching Capacity 52 Gbps Non-Blocking Throughput 26 Gbps Forwarding Rate 39 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN Display 1.3″ touchscreen LCM Cooling Fanless (passive) Form Factor Rack mount (1U) Power Method Universal input 100–240V AC, 50/60 Hz Power Supply AC/DC internal, 120W Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output) Management UniFi Network (v7.2.94 and later) Enclosure SGCC steel Dimensions / Weight 442 × 200 × 44 mm • 3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing ESD Protection Air: ±16 kV • Contact: ±12 kV Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-24-POE Datasheet Ubiquiti Installation Guide Best For UniFi Networks Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller. Offices & Studios Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces. Retail & Hospitality Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit. SOHO Racks Compact 1U depth and a touch display suit small server cabinets and comms cupboards. Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host. 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget. Two 1G SFP ports accept fibre or DAC uplinks into your core network. Mounts in a standard 1U rack; fanless design needs no special ventilation. Frequently Asked Questions How many PoE ports does the USW-24-POE have? Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch. Does it require a separate controller? It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees. Is it fanless? Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments. What are the SFP ports for? The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core. Is the USW-24-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $858.00

• Save $2.17

  Teltonika Teltonika RUT241 4G LTE Industrial Router – AU Version (RUT241065000)

  Australia Version · Industrial 4G LTE Router Teltonika RUT241 4G LTE Industrial Router Compact, reliable and ready for Australian deployments. The Teltonika RUT241065000 is ideal for CCTV systems, alarm communication, remote access and backup internet where stable connectivity matters. The Teltonika RUT241 4G LTE Industrial Router is a compact industrial-grade mobile router designed for CCTV remote access, alarm communication, backup internet and industrial networking applications across Australia. The Australian RUT241065000 version includes the correct regional firmware and Australian power supply, making it ideal for Hikvision, Dahua, Uniview, Teltonika RMS and remote monitoring deployments. Commonly used for security camera systems, farms, workshops, warehouses, construction sites, remote sheds and temporary installations, the RUT241 delivers stable 4G LTE connectivity with automatic failover, VPN support and industrial reliability in a compact form factor. Pair the RUT241 with our Teltonika industrial networking range, network switches or security camera systems for complete remote surveillance deployments. 4G LTE Connectivity Reliable LTE Cat 4 connectivity with 3G and 2G fallback for sites where fixed internet is unavailable or unstable. Wi-Fi + Ethernet Includes Wi-Fi hotspot functionality and dual Ethernet ports for NVRs, cameras, switches and connected devices. Automatic Failover Helps keep surveillance and networking online with automatic WAN failover for higher uptime. RMS Ready Compatible with Teltonika Remote Management System for remote monitoring, access and device management. CCTV Remote Access Perfect for connecting NVRs, cameras and alarm systems where fixed NBN is unavailable, unreliable or not yet installed. Industrial Reliability Built for tougher installs with a compact industrial design suited to cabinets, sheds, remote sites and commercial projects. Why choose the Australia version? The RUT241 Australia version (RUT241065000) is the smarter choice for local installations, with the correct regional firmware and Australian power supply for a cleaner, more reliable setup. Made for local use Designed for Australia, New Zealand and Taiwan for a more suitable regional deployment. Australian power supply No adapters, no guesswork — just a simpler plug and play installation. Less confusion Avoid the uncertainty that can come with choosing a global version for a local project. Built for security Ideal for CCTV remote access, alarm communication and dependable backup internet. For Australian homes, businesses and remote sites, this is the version you want for a smoother install and more dependable day-to-day use. Common RUT241 deployment applications CCTV Remote Access Ideal for Hikvision, Dahua, Uniview and IP surveillance systems requiring remote viewing over 4G LTE. Alarm Communication Suitable for alarm systems requiring stable mobile communication and backup connectivity. Backup Internet Provides automatic failover internet redundancy for businesses and remote installations. Industrial Networking Compact industrial housing makes the RUT241 suitable for cabinets, workshops and commercial sites. Compared to consumer-grade 4G routers, the Teltonika RUT241 is built for professional surveillance, networking and industrial deployments with improved reliability, VPN functionality and remote management support. Teltonika RUT241 specifications & industrial router features Model Teltonika RUT241065000 Region Australia / New Zealand / Taiwan Power Supply Australian PSU included Cellular 4G LTE Cat 4 with 3G / 2G fallback Wi-Fi 2.4 GHz Wi-Fi access point with hotspot functionality Ports 2 x Ethernet ports SIM Single SIM Failover Automatic WAN failover Remote Management Teltonika RMS compatible I/O Digital and analogue I/O support Use Cases CCTV systems, alarm communication, remote access, backup internet and industrial networking Mounting DIN rail and surface mount compatible VPN Support Supports multiple VPN protocols for secure remote connectivity VPN Protocols OpenVPN, IPsec, WireGuard, GRE, PPTP, L2TP and more Management Platform RutOS WebUI + Teltonika RMS support Industrial Use Suitable for industrial, commercial and remote installations Compliance NDAA 889, CE, UKCA, CB What’s in the box Teltonika RUT241065000 industrial router Australian power supply Quick start documentation Downloads & setup resources Everything you need to get the RUT241 up and running. These official Teltonika resources cover first-time setup, configuration, specifications and remote management. Quick Start Guide Hardware installation, first login and safety information ↗ User Manual Full WebUI, RutOS features and administration guidance ↗ Datasheet Official product overview, features and technical highlights ↗ RUT241 Flyer Official Teltonika brochure and deployment overview ↗ Teltonika RUT241 setup & configuration videos Watch the official setup videos below for a faster installation and smoother remote management setup. Quick Start Guide Step-by-step setup for powering on, connecting and getting your RUT241 online. Teltonika RUT241 FAQ Is this the Australian version of the Teltonika RUT241? Yes. This is the RUT241065000 Australia version suitable for Australia, New Zealand and Taiwan, with an Australian power supply included. Can I use the RUT241 for CCTV remote access? Yes. It is ideal for CCTV systems, NVRs, alarm panels and remote sites where fixed internet is unavailable or unreliable. Does it support automatic internet failover? Yes. The RUT241 can be configured for automatic WAN failover to help keep your security system online. Does the RUT241 work with Teltonika RMS? Yes. It is compatible with Teltonika RMS for remote monitoring, management and secure access. Does it include Wi-Fi? Yes. The RUT241 includes 2.4 GHz Wi-Fi hotspot functionality for setup and connected devices. What SIM card do I need? You will need an active data SIM from a compatible Australian mobile carrier with a suitable data plan. Can the RUT241 be used as a backup internet connection? Yes. The RUT241 is commonly used as a 4G failover router for CCTV systems, alarms, POS systems and business redundancy. Will this work with Hikvision, Dahua or Uniview NVRs? Yes. The RUT241 works well with Hikvision, Dahua, Uniview, Tiandy and other IP surveillance systems. Is this suitable for industrial or remote locations? Yes. The compact industrial design makes the RUT241 suitable for cabinets, farms, workshops, sheds and commercial installations. Can the RUT241 operate without fixed NBN internet? Yes. The RUT241 is commonly deployed as a standalone 4G internet solution for remote sites and temporary setups. Why buy Teltonika from CCTV Guru? CCTV Guru supplies genuine Australian Teltonika products with local support, fast Australia-wide shipping and installer-focused advice for CCTV, remote access and industrial networking deployments. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

  Read more less

  $349.00 $346.83

• Save $21

  Teltonika Teltonika TRB140 Industrial LTE Gateway | 4G Cat 4 Gigabit Ethernet IoT Gateway

  4G LTE Cat 4 Industrial Gateway Teltonika TRB140 — Industrial 4G LTE Gateway with Gigabit Ethernet The Teltonika TRB140 is an ultra-compact, energy-efficient industrial LTE gateway built to add reliable, secure cellular connectivity to a single device or network segment across Australia. It pairs 4G LTE Cat 4 (up to 150 Mbps down / 50 Mbps up) with 3G and 2G fallback, a full-speed Gigabit Ethernet port, and a Micro-USB interface — all running Teltonika's hardened RutOS Linux firmware with VPN support, industrial Modbus & DNP3 protocols, and zero-touch RMS remote management. Housed in a rugged aluminium case rated from -40 °C to +75 °C, it's ideal for SCADA telemetry, remote CCTV backhaul, smart energy and PLC/RTU upgrades. Connectivity 4G LTE Cat 4 Wired 1× Gigabit LAN SIM Mini SIM (2FF) Industrial -40 to +75 °C Why choose the TRB140 Add 4G to any wired device A single Gigabit Ethernet port brings full-speed cellular connectivity to PLCs, RTUs, IP cameras and industrial computers — upgrade legacy equipment without replacing it. Built for industrial protocols Native Modbus TCP/RTU and DNP3 support, plus MQTT and SNMP, make the TRB140 a natural fit for SCADA, energy, utilities and process-automation deployments. Secure RutOS platform OpenWrt-based RutOS firmware with OpenVPN, IPsec, GRE, L2TP and ZeroTier, a hardened firewall, SSH access and full API/scripting for custom IoT integrations. Manage your whole fleet Teltonika RMS delivers zero-touch provisioning, monitoring and firmware updates across thousands of devices — even on private or dynamic-IP SIMs, with no site visits. Technical specifications Mobile / Cellular 4G LTE Cat 4 — up to 150 Mbps DL / 50 Mbps UL 3G Up to 42 Mbps DL / 5.76 Mbps UL 2G GPRS / EDGE fallback SIM 1 × Mini SIM (2FF), 1.8 V / 3 V Mobile antennas 2 × SMA connectors (main + auxiliary) Interface & I/O Ethernet 1 × RJ45 10/100/1000 Mbps (Gigabit), configurable LAN / WAN USB 1 × Micro-USB (configuration & virtual networking) Industrial protocols Modbus TCP/RTU, DNP3, MQTT, SNMP Hardware & System CPU ARM Cortex-A7, 1.2 GHz Memory 128 MB RAM / 512 MB flash Operating system RutOS (OpenWrt-based Linux) Power Input 9–30 VDC via 4-pin connector, with reverse polarity & surge protection Power supply PSU included Consumption Up to ~5 W Physical & Environment Casing Aluminium housing Dimensions 64.4 × 74.5 × 25 mm Weight 134 g Operating temperature -40 °C to +75 °C Mounting DIN rail or flat surface (kit required) Software & Management VPN OpenVPN, IPsec, GRE, L2TP, PPTP, ZeroTier Network Firewall, SMS control, Modbus, MQTT, dynamic DNS, mobile WAN failover Management WebUI, CLI, SSH, SNMP, JSON-RPC, Teltonika RMS Compliance RCM (Australia), NDAA 889, CE/RED, UKCA, CB, WEEE Ordering Information Order code (SKU) TRB140107000 Warranty 2 years (24 months) — Australian warranty Frequently asked questions What is the TRB140 used for?It's an industrial LTE gateway that adds 4G connectivity to a single wired device or network segment via Gigabit Ethernet — ideal for SCADA, remote telemetry, smart energy and PLC/RTU upgrades. How fast is the cellular connection?The TRB140 uses 4G LTE Cat 4, delivering up to 150 Mbps download and 50 Mbps upload, with automatic 3G and 2G fallback where LTE coverage is thin. Does the TRB140 support Modbus and DNP3?Yes. It natively supports Modbus TCP/RTU and DNP3, plus MQTT and SNMP, making it well suited to utilities, energy and process-automation deployments. Does the TRB140 have Wi-Fi?No. The TRB140 is a single-port Ethernet gateway with no Wi-Fi. If you need wireless LAN, consider a Teltonika RUT-series router instead. What SIM does it take?One Mini SIM (2FF) slot. It supports the primary 4G LTE bands used by Telstra, Optus and Vodafone in Australia, including Band 28 (700 MHz) for regional coverage. Can I manage it remotely?Yes. The TRB140 is fully compatible with Teltonika RMS for secure remote configuration, diagnostics and bulk firmware updates across your entire fleet. Does it support VPN?Yes. RutOS provides OpenVPN, IPsec, GRE, L2TP, PPTP and ZeroTier, enabling secure encrypted tunnels to connected industrial equipment. Is a power supply included?Yes. The TRB140 ships with a PSU and accepts 9–30 VDC with reverse polarity and surge protection for flexible field installation. What warranty applies in Australia?The TRB140 carries a 2-year (24-month) warranty, backed by local Australian support. Downloads TRB140107000 Datasheet Teltonika LTE Gateway Quick Start Guide Teltonika LTE Gateway User Manual 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $320.00 $299.00

• Save $11

  Ubiquiti Ubiquiti UniFi Access Door Hub Mini UA-Hub-Door-Mini — Single-Door PoE++ Controller

  UniFi Access — NDAA Compliant UniFi Access Door Hub Mini — Single-Door PoE++ Access Controller (UA-Hub-Door-Mini) The UniFi Access Door Hub Mini (UA-Hub-Door-Mini) is a compact, DIN-rail-mounted controller that brings full single-door access control to the UniFi Access ecosystem. It powers and manages an electric lock, exit-request button, and door-position sensor over a single PoE++ cable — and adds two PoE+ output ports to power your UniFi Access reader and lock directly from the hub. With support for up to 3,000 users and centralised management through UniFi Access, it's ideal for offices, retail spaces, and small commercial sites across Australia with no licence fees and no cloud lock-in. Genuine Ubiquiti stock with fast Australia-wide shipping. Doors 1 Door Capacity 3,000 Users Power PoE++ Input I/O Relay + REX + Sensor Why Choose the UniFi Access Door Hub Mini? Complete Single-Door Control Secure one access-controlled door end to end — drive an electric strike or magnetic lock via the onboard relay, monitor door position, and accept exit requests, all from one compact unit. PoE++ Powered With PoE+ Outputs A single PoE++ input powers the hub, while two PoE+ output ports (30W each, 45W aggregate) let you power your UniFi Access reader and lock straight from the device — no extra power supplies. Up to 3,000 Users Scales well beyond a typical small site, storing up to 3,000 user credentials for a single managed door. Dry & Wet Relay Options A switchable relay supports both dry (30V DC, 1A) and wet (12V DC, 1A) output, giving you flexibility to wire a wide range of electric strikes and magnetic locks. Simple DIN-Rail Installation Mounts cleanly to a DIN rail (included) inside a comms cabinet or enclosure, with three GbE RJ45 ports for network and PoE distribution. UniFi Access — No Licence Fees Manage doors, users, schedules, and logs through the UniFi Access app and web console — fully local, with no monthly subscription or per-door licensing. UL 294 Certified Independently certified to UL 294 (Level I) and CAN/ULC-60839-11-1 (Grade I) for access control system reliability. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UA-Hub-Door-Mini Solution Type Compact single-door access control hub Supported Doors 1 Maximum User Count 3,000 Networking Interface (3) GbE RJ45 ports Power Method PoE++ (UL 294 Power-limited Class 2 PSU) PoE Interface (1) PoE++ input, 50V DC, 1A • (2) PoE+ outputs, 50V DC, 30W per port (max 45W aggregated) Max. Power Consumption 19W (without PoE output) • 50W (with PoE output) Dry Output Relay 30V DC, 1A Wet Output Relay 12V DC, 1A Input Terminals (1) Door exit request (REX) • (1) Door position Buttons (1) Factory reset • (1) Dry/Wet switch Management UniFi Access app & web console Mounting DIN-rail (included) Enclosure Material Polycarbonate, metal Dimensions 113 × 66 × 27.6 mm Weight 190 g Indoor / Outdoor Use Indoor only Operating Temperature 0°C to 40°C Operating Humidity 5–90% non-condensing Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 UL 294 Level Destructive attack I • Line security I • Endurance I • Standby power I Compliance NDAA compliant Downloads & Resources UA-Hub-Door-Mini Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Access Door Hub Mini UA-Hub-Door-Mini single-door access controller. DIN-Rail Mount DIN-rail mounting hardware for clean cabinet installation. Documentation Quick-start installation guide. Not Included Door lock hardware, UniFi Access reader, credentials, and PoE source are sold separately. Best For Offices & Suites Secure a main entry or server room with tap, mobile, and PIN access for up to 3,000 staff. Retail & Back-of-House Control stockroom and staff-only doors while keeping logs and schedules in UniFi Access. Small Commercial Sites Add a single managed door without a full multi-door hub — compact, DIN-rail, no licence fees. Government & Secure Sites NDAA-compliant, UL 294 certified hardware for supply-chain-sensitive deployments. Requires a UniFi Access host (UNVR, Cloud Key, or compatible UniFi console) running the UniFi Access application. Powered by a PoE++ source — pair with a UniFi PoE++ switch for single-pane management. Mounts to a DIN rail inside a comms cabinet or enclosure (indoor use only). Two PoE+ output ports can power the UniFi Access reader and lock directly from the hub. Frequently Asked Questions What is the UA-Hub-Door-Mini used for? It's a compact controller that manages a single access-controlled door using UniFi Access readers and locks, supporting up to 3,000 users. How is it powered? By a single PoE++ input. It also provides two PoE+ output ports (30W each) to power your UniFi Access reader and lock directly. Does it require a subscription? No. UniFi Access is licence-free — there are no monthly fees or per-door charges. Can it control mag locks and electric strikes? Yes. The switchable relay supports dry (30V DC, 1A) and wet (12V DC, 1A) output for magnetic locks and electric strikes. Can it be installed outdoors? No. The Door Hub Mini is rated for indoor use only and mounts to a DIN rail inside a cabinet or enclosure. Is it NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-Hub-Door-Mini is NDAA Section 889 compliant and UL 294 certified. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

  $250.00 $239.00

• 

  UNV Uniview UNV IPC6324LWH-AX5C-VG2 4MP OwlView Tri-Guard PTZ — 5× Optical Zoom | ColorHunter | Auto-Tracking

  NDAA Compliant · 4MP OwlView Tri-Guard PTZUNV 4MP PTZ IPC6324LWH-AX5C-VG2 4MP OwlView Tri-Guard PTZ — Australian Stock & 3-Year Warranty The Uniview UNV IPC6324LWH-AX5C-VG2 is a compact 4 MP OwlView PTZ with 5× optical zoom (2.7–13.5 mm), built for active perimeter coverage across Australian car parks, yards and building entrances. It pairs a large 1/1.8″ CMOS sensor with ColorHunter + Wise-ISP for vivid low-light colour, Tri-Guard active deterrence with warm light to 40 m, 120 dB true WDR, smart auto-tracking, built-in mic & speaker for two-way audio, and a weatherproof IP66 metal body — powered over PoE (802.3at) and backed by a 3-year Australian warranty. Why the IPC6324LWH-AX5C-VG2 stands out Resolution 4MP / 2688×1520 Low-Light ColorHunter + 120dB WDR Deterrence Warm light to 40m Lens / Zoom 5× optical · 2.7–13.5mm Built for Australian conditions Zoom in and follow the action 5× optical zoom (2.7–13.5 mm) lets you pull in detail across a wide area, while smart auto-tracking locks onto and follows human targets as they move through the scene. Vivid colour after dark ColorHunter with Wise-ISP keeps footage in full colour in low light, and Tri-Guard warm light reaches up to 40 m to deter intruders and reveal colours that IR alone cannot. Talk down intruders A built-in mic and speaker with two-way audio, plus 1/1 alarm I/O, let you issue live warnings and integrate with sirens or gates for active deterrence. One-cable, weatherproof install PoE (IEEE 802.3at) carries power and data over a single Cat6 run, and the IP66 metal housing handles Australian sun, dust and rain from -30 °C to 60 °C. Technical specifications Uniview UNV IPC6324LWH-AX5C-VG2 — Full Specifications Brand / Series Uniview UNV · OwlView PTZ Model IPC6324LWH-AX5C-VG2 Image Sensor 1/1.8″ progressive-scan CMOS Resolution 4 MP — 2688×1520 @ 30fps Lens / Zoom 2.7–13.5 mm motorised · 5× optical zoom Field of View 113.69°–50.29° (H) · 59.46°–28.45° (V) Low-Light Tech ColorHunter + Wise-ISP full-colour Deterrence / Light Tri-Guard warm light up to 40 m Wide Dynamic Range 120 dB true WDR · 2D/3D DNR · digital defog Smart Analytics Auto-tracking (human) · Smart Intrusion Prevention: cross-line & intrusion (human/vehicle) Audio Built-in mic & speaker · two-way audio · Audio I/O 1/1 Alarm I/O 1 / 1 Compression Ultra 265 / H.265 / H.264 / MJPEG · triple streams · U-Code Storage MicroSD up to 512 GB · ANR · NAS Network / Security RJ45 10/100M · ONVIF S/G/T · HTTPS / TLS 1.3 Power PoE (IEEE 802.3at) / DC 12V ±25% Weather / Env. IP66 metal housing · -30 °C to 60 °C · ≤95% RH Form Factor Mini PTZ dome Compliance NDAA / Section 889 compliant Warranty 3-Year Australian warranty Frequently asked questions How much zoom does it have?It has a 5× optical zoom (2.7–13.5 mm) motorised lens, so you can frame a wide area or pull in close detail and let the PTZ pan, tilt and follow targets. Does it record in colour at night?Yes. ColorHunter with Wise-ISP delivers full-colour low-light imaging, and Tri-Guard warm light reaches up to 40 m to keep colour and deter intruders in the dark. Does it auto-track?Yes — smart auto-tracking locks onto human targets and follows them through the scene, with Smart Intrusion Prevention for cross-line and intrusion events. Is the IPC6324LWH-AX5C-VG2 NDAA compliant?Yes. Uniview UNV OwlView PTZ cameras are NDAA Section 889 compliant, making them suitable for government, commercial and security-sensitive sites in Australia. Does it support two-way audio?Yes — a built-in mic and speaker with Audio I/O 1/1 enable two-way audio for live talk-down (check local laws before recording audio). How is it powered?Single-cable PoE (IEEE 802.3at) over Cat6 to a PoE+ NVR or switch. A 12V DC option is also supported. Which NVRs work with it?It works with Uniview UNV NVRs via plug-and-play and with most ONVIF (Profile S/G/T) recorders for video, PTZ control and AI events. Can it record without an NVR?Yes — a MicroSD card (up to 512 GB) enables on-camera recording, with ANR to fill gaps if the network drops. What warranty applies?This camera ships with a 3-year Australian warranty and local CCTV Guru tech support. Documentation & downloads IPC6324LWH-AX5C-VG2 Datasheet Uniview UNV PTZ Dome Quick Start Guide Uniview UNV PTZ User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $365.00

• 

  AXIS AXIS M4216-V 4MP Indoor Varifocal Dome Camera (02112-001)

  NDAA Compliant • 4MP Varifocal Dome AXIS 4MP Vari-Focal DomeAXIS M4216-V — 4MP Indoor Varifocal Dome with Deep Learning Analytics The AXIS M4216-V is a compact, discreet 4 MP indoor dome that delivers great image quality in any light. Its varifocal 3–6 mm lens with remote zoom and focus gives a flexible field of view, while Lightfinder and Forensic WDR keep colours and details sharp in challenging lighting. A built-in deep learning processing unit (DLPU) runs AI analytics on the edge, and Axis Edge Vault protects the camera with hardware-based cybersecurity. Resolution 4 MP (2304×1728) Lens Varifocal 3–6 mm Low Light Lightfinder + WDR Analytics Deep Learning DLPU Affordable varifocal domes with deep learning – AXIS M42 Series Great images, every time Ideal for indoor surveillance, the AXIS M4216-V delivers 4 MP in a wide 4:3 view and 3 MP at 16:9. Remote zoom and focus make installation easy, while Lightfinder captures colour images in low light and Forensic WDR preserves detail in scenes with both very bright and very dark areas — all in a small, repaintable dome that blends into any environment. Deep Learning Analytics The on-board DLPU runs AXIS Object Analytics, AXIS Face Detector and AXIS Scene Metadata, generating actionable metadata for fast forensic search in live or recorded video. Flexible Varifocal Lens The 3–6 mm varifocal lens with remote zoom and auto-focus delivers a 100–45° horizontal field of view, so you can dial in exactly the coverage each scene needs. Discreet & Vandal-Resistant Compact, repaintable and IK08 vandal-rated, this dome resists redirection, defocusing and impact — ideal anywhere discreet indoor monitoring matters. Built-In Cybersecurity Axis Edge Vault with signed OS, secure boot and a secure keystore protects device integrity and guards against unauthorised access. Technical Specifications Imaging Image Sensor 1/2.7" CMOS Max Resolution 2304×1728 (4 MP) Max Frame Rate 25/30 fps Min Illumination 0.18 lux colour / 0.03 lux B/W Day & Night Yes Lightfinder Yes WDR Forensic WDR Lens Focal Length Varifocal 3–6 mm Aperture F1.9–2.7 Horizontal FoV 100–45° Vertical FoV 72–34° Remote Zoom / Focus Yes Video & Analytics Compression H.264, H.265, Zipstream Analytics Deep learning (DLPU) Included Apps AXIS Object Analytics, Face Detector, Scene Metadata, Live Privacy Shield, VMD ONVIF Profile G Audio Supported (via AXIS T61 accessory) General Built-In IR No Local Storage microSD card slot Power PoE Class 2 Vandal Rating IK08 Operating Temp 0 to 45 °C (indoor) Cybersecurity Axis Edge Vault, signed OS, secure boot Compliance NDAA (889) & TAA compliant Part Number 02112-001 Downloads AXIS M4216-V DatasheetAxis Dome Camera Quick Start GuideAxis Dome Camera User Manual Frequently Asked Questions What resolution does the AXIS M4216-V record?It captures 4 MP (2304×1728) in a 4:3 aspect ratio and 3 MP when set to 16:9, at up to 25/30 fps. Does the M4216-V have built-in IR?No. Unlike the M4216-LV, this model has no integrated IR. It relies on available light with Lightfinder and Forensic WDR; for dark scenes pair it with an external Axis illuminator. Is the lens varifocal?Yes — a 3–6 mm varifocal lens (F1.9–2.7) with remote zoom and auto-focus, giving a 100–45° horizontal field of view. What analytics are supported?A deep learning processing unit runs AI analytics on the edge, including AXIS Object Analytics, AXIS Face Detector and AXIS Scene Metadata. Is this camera NDAA compliant?Yes. Axis cameras are NDAA Section 889 and TAA compliant, suitable for government and enterprise projects. Is it suitable for outdoor use?No. The M4216-V is an indoor camera (no IP weather rating, 0–45 °C operating range). For outdoor sites choose an IP-rated Axis dome. How is it powered?Via Power over Ethernet, PoE Class 2 — a single network cable carries power and data. Does it work with third-party VMS?Yes. It supports ONVIF Profile G and the AXIS Camera Application Platform for broad system compatibility. Does it record locally?Yes, it has a microSD card slot for onboard recording. We recommend an AXIS Surveillance high-endurance card. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $993.89

• 

  Ubiquiti Ubiquiti UACC-Lock-Strike-Secure-15mm Fail-Secure Lock

  Ubiquiti UACC-Lock-Strike-Secure-15mm Fail-Secure Lock The exact UACC-Lock-Strike-Secure-15mm model is a fail-secure electric strike, as identified by UniFi. 12V DC ±10%; current 400mA ±10%. Rated holding force 1,200kg. Zinc-alloy body, aluminium-alloy front plate and stainless-steel latches. Recess mounting for compatible single wooden or metal doors. Frequently asked questions Is it fail-safe or fail-secure? UniFi identifies this exact SKU as fail-secure: loss of electrical power leaves the strike locked. Is the entire lock stainless steel? No. UniFi specifies zinc alloy for the body, aluminium alloy for the front plate and stainless steel for the latches. Is it interchangeable with a fail-safe strike? No. Select the locking behaviour and door hardware required for the installation; do not substitute by a similar stock-code name. Official manufacturer specifications and documents

  Read more less

  $165.65

• 

  Ubiquiti Ubiquiti UCG-Max 2.5G Multi-WAN Cloud Gateway

  Ubiquiti Cloud Gateway Max · NDAA COMPLIANT Ubiquiti UCG-Max: High-Performance 2.5G Multi-WAN Cloud Gateway with Built-In NVR Storage Engineered for high-density small-to-medium deployment environments, the Ubiquiti UCG-Max delivers enterprise-grade multi-WAN routing, advanced security inspection, and selectable NVR storage capabilities inside a remarkably compact footprint. Designed to streamline unified network management, it supports the full UniFi application ecosystem to provide seamless control over network infrastructure, security gateways, and high-definition surveillance feeds. Routing Throughput 2.3 Gbps IDS/IPS Interface Speed 5x 2.5 GbE RJ45 NVR Storage 512 GB NVMe SSD Device Capacity 30+ UniFi / 300+ Clients Advanced Threat Management and Scalable Architecture The Ubiquiti UCG-Max integrates deep packet inspection, signature-based IDS/IPS threat detection, and application-aware firewall policies to secure complex commercial perimeters. License-free SD-WAN capabilities, multi-WAN load balancing, and WireGuard/OpenVPN server support ensure optimized site-to-site connectivity without recurring subscription overheads. Review full deployment parameters on our Ubiquiti UCG-Max product page. Multi-Gigabit 2.5G Performance Equipped with five 2.5 GbE ports, the gateway removes internal bottlenecks, allowing businesses to leverage multi-gigabit internet connections and high-speed local network transfers seamlessly across switches and access points. Integrated UniFi Protect NVR Featuring built-in NVMe SSD storage, the unit transforms into a fully functional network video recorder capable of managing multiple high-definition security streams without requiring a separate dedicated appliance. Technical Specification Matrix Model UCG-Max Processor Quad-core ARM Cortex-A53 at 1.5 GHz System Memory 3 GB DDR4 On-Board Storage 512 GB NVMe SSD Networking Interface (5) 1/2.5 GbE RJ45 ports (1 WAN, 4 LAN) IDS/IPS Throughput 2.3 Gbps Power Method USB Type-C (5V DC/5A) Enclosure Material Polycarbonate Does the UCG-Max support multiple WAN connections for failover? Yes, the gateway supports multi-WAN load balancing and automated failover configurations to maintain uninterrupted business connectivity. How many security cameras can the built-in NVR handle? Depending on resolution settings, the unit can comfortably manage up to 15 HD cameras, 8 2K cameras, or 5 4K UniFi security cameras utilizing its integrated NVMe storage. Is a software subscription required for advanced routing features? No, all core networking, firewall, deep packet inspection, and license-free SD-WAN features are included natively through the UniFi Network application suite. Is this hardware compliant with government procurement regulations? Yes, the Ubiquiti UCG-Max is fully NDAA compliant, satisfying strict federal and corporate supply chain security standards. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

  $618.20

• 

  Ubiquiti Ubiquiti AI Key Smart Detection Edge Appliance

  Ubiquiti UniFi · NDAA & TAA COMPLIANT Ubiquiti AI Key Edge AI Processing Appliance for Enterprise Surveillance Engineered to drastically expand security monitoring operations, the Ubiquiti AI Key functions as a dedicated edge processing appliance designed to seamlessly offload intensive smart-detection workloads from your core UniFi Protect network video recorders. Built for dense commercial environments, multi-camera deployments, and high-security installations, it optimizes surveillance processing capacity without sacrificing stream ingest or local storage performance. Compute Capacity 1,800 Detections/hr Processor & RAM Arm Cortex-A78AE / 16GB On-Board Storage 256 GB SSD Cache Power & Interface PoE++ / GbE RJ45 Advanced Hardware Architecture and UniFi Protect Integration The unit pairs directly with the UniFi Protect ecosystem to support sophisticated tracking algorithms, natural language search options, and advanced behavioral analysis. Driven by an Arm Cortex-A78AE v8.2 processor backed by 16 GB of LPDDR5 system memory and a local 256 GB SSD for metadata caching, it guarantees minimal latency during high-volume event searches. System administrators can easily monitor device health in real time utilizing the integrated 1.3-inch LCM touchscreen interface without requiring a dedicated terminal workstation. Server-Class Edge Computing Eliminates NVR performance bottlenecks by shifting complex machine learning workloads, face recognition models, and license plate reading tasks directly to a dedicated local hardware asset. Ruggedized Industrial Design Housed inside a compact, premium-grade aluminum alloy enclosure featuring robust ESD/EMP protection (±12kV air / ±8kV contact) to guarantee continuity in harsh technical environments. Technical Specification Matrix Model AI-KEY Compute Capacity Up to 1,800 smart detections per hour Processor Arm Cortex-A78AE v8.2 System Memory 16 GB LPDDR5 On-Board Storage 256 GB SSD Networking Interface (1) GbE RJ45 port Power Method PoE++ (50–57V supported range) Enclosure Material Aluminium alloy How many cameras can a single AI Key support? The AI Key can pair with an unlimited number of cameras within a UniFi Protect domain, processing up to 1,800 smart detection events hourly. Additional units can be added to larger deployments to scale throughput linearly. Is specialized power equipment required for setup? Yes, the device relies on standard PoE++ for power delivery and data transmission, drawing a maximum of 45W through a single Ethernet run from an enterprise PoE++ switch. Does this device comply with federal procurement regulations? Yes, the hardware model is fully NDAA compliant, satisfying strict federal, state, and corporate supply chain guidelines. What local information is stored on the built-in SSD? The internal 256 GB solid-state drive is dedicated to managing AI model artifacts, event queues, and advanced search metadata securely on-premise. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

  $1,749.00

• 

  Bosch Bosch B810 — RADION Wireless Receiver (White, 433MHz, Solution 3000)

  RADION · 433MHz · SDI2 · Solution 3000B810 RADION RXB810 RADION Wireless Receiver — Australian Stock & 3-Year Warranty The Bosch B810 is the RADION wireless receiver that brings wireless devices into a Bosch Solution 3000 system. Connecting via the SDI2 bus, it supervises up to 504 wireless points, 1000 key fobs and 8 repeaters, letting you add wireless PIRs, reed contacts, glass-break detectors, key fobs and panic buttons without running cable. Dual internal antennas, RF interference detection and cover/wall tamper protection make for a reliable retrofit. Australian stock, backed by a 3-year warranty. Frequency 433 MHz Points Up to 504 Key Fobs Up to 1000 Bus SDI2 Full RADION Wireless Adds Bosch RADION PIRs, reeds, glass-break detectors, fobs and panic buttons to a Solution 3000 without cabling. High Capacity Supervises up to 504 wireless points, 1000 key fobs and 8 repeaters for homes through to larger sites. Dual Antenna Reliability Two internal antennas give spatial and polar RF reception, with detection and reporting of RF interference. Tamper Protected Cover and wall tamper protection plus external status LEDs for secure, easy installation and diagnostics. Technical Specifications Model / SKU Bosch B810 (BOSB810) Series RADION Type Wireless receiver Frequency 433 MHz Bus / Connection SDI2 Wireless Points Supported Up to 504 Key Fobs Supported Up to 1000 Repeaters Supported Up to 8 Antennas Dual internal (spatial & polar) Mounting / Colour Wall mount, White Power Multi-voltage, 10–14 VDC Compatible Panel Bosch Solution 3000 Warranty 3 Years (Australia) Downloads B810 DatasheetBosch B810 Quick Start GuideBosch B810 User Manual Frequently Asked Questions What does the B810 do?It connects Bosch RADION wireless devices — PIRs, reeds, glass-break sensors, fobs and panic buttons — to a Solution 3000 panel. Do I need it for wireless Bosch sensors?Yes. The B810 is required to enrol any RADION wireless device onto the system. Which panel is it for?The Bosch Solution 3000. It is not intended for Solution 2000 or Solution 6000. How does it connect to the panel?Via the SDI2 bus, with multi-voltage 10–14 VDC power. How many devices can it supervise?Up to 504 wireless points, 1000 key fobs and 8 repeaters. Is it tamper protected?Yes — it includes cover and wall tamper protection plus RF interference detection. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $124.00

• 

  Bosch Bosch WE800EV2 Kit — 433MHz Wireless Receiver + 2x 4-Button Key Fobs

  433MHz · Receiver + 2 Fobs · Relay ControlWE800EV2 KitWE800EV2 Wireless Remote Kit — Australian Stock & 3-Year Warranty The Bosch WE800EV2KIT is a flexible 433MHz wireless remote-control system that includes 1 x WE800EV2 receiver and 2 x 4-button key fobs. The receiver drives a relay output that connects to a panel keyswitch or programmable input, so you can remotely arm/disarm an alarm or trigger gates, garages and outputs. Because it works via relay rather than native wireless, it suits Bosch Solution 2000, 3000 and 4000 panels. Australian stock, backed by a 3-year warranty. Includes RX + 2 Fobs Frequency 433 MHz Output Relay Suits Sol 2000/3000/4000 Complete Kit Receiver plus two 4-button fobs — ready to add wireless control to an existing panel or automation setup. Relay-Based Flexibility The receiver relay wires to a keyswitch or programmable input, working across Solution 2000, 3000 and 4000. Multi-Function Fobs Four buttons per fob let you arm, disarm and trigger outputs such as gates, garages, lights or sirens. Installer Friendly Simple COM/NO/NC wiring and straightforward programming make for a fast, reliable install. Technical Specifications Model / SKU Bosch WE800EV2KIT Includes 1 x WE800EV2 receiver, 2 x 4-button key fobs Frequency 433 MHz Output Relay (COM / NO / NC) Connection Panel keyswitch or programmable input Suits Bosch Solution 2000 / 3000 / 4000 (via relay) Typical Use Arm/disarm, gate, garage, output switching Warranty 3 Years (Australia) Downloads WE800EV2 DatasheetBosch WE800EV2 Quick Start GuideBosch WE800EV2 User Manual Frequently Asked Questions What's in the kit?One WE800EV2 receiver and two 4-button wireless key fobs. Which panels does it work with?Bosch Solution 2000, 3000 and 4000 — it triggers via a relay output rather than native wireless integration. How does it wire in?The receiver relay (COM/NO/NC) connects to a panel keyswitch or programmable input to arm/disarm or trigger outputs. What frequency does it use?433 MHz, the standard Bosch wireless band in Australia. Can I control a gate or garage with it?Yes — the relay output can drive gates, garages, lights or sirens as well as arm/disarm. How is it different from the B810?The B810 offers full RADION integration on Solution 3000; the WE800EV2 is a simpler relay-based remote for 2000/3000/4000. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $185.00

• 

  Bosch Bosch ICP-SOL-ENC — Metal Enclosure (White) for Solution 2000 / 3000

  Genuine Bosch · White Steel · Solution 2000/3000 · Tamper-Ready Bosch White Enclosure ICP-SOL-ENC Metal Enclosure — Australian Stock & 3-Year Warranty The Bosch ICP-SOL-ENC is a genuine white powder-coated steel enclosure that houses the control panel PCB, backup battery and plug pack for Bosch Solution 2000 and Solution 3000 alarm systems. It provides a secure, tidy and professional install with a lockable hinged cover, cable entry points and mounting standoffs for the board and a 12V 7Ah SLA battery. The clean white finish suits garages, cupboards and plant rooms. Genuine Bosch hardware, backed by a 3-year Australian warranty. Technical Specifications Model / SKU ICP-SOL-ENC (BOSICP-SOL-ENC) Suits Panels Bosch Solution 2000 / Solution 3000 Type Metal panel enclosure Colour White Material Powder-coated steel Battery Space Fits 12V 7Ah SLA backup battery Warranty 3 Years (Australia) Downloads ICP-SOL-ENC Datasheet Bosch Enclosure Quick Start Guide Bosch Enclosure User Manual Frequently Asked Questions Which panels fit the ICP-SOL-ENC?It houses the Bosch Solution 2000 (ICP-SOL2-P) and Solution 3000 (ICP-SOL3-P) control panel PCBs. Is the panel board included?No. This is the enclosure only — the PCB, keypad, plug pack and battery are ordered separately. Does a 7Ah battery fit inside?Yes. There is room for a standard 12V 7Ah sealed lead-acid backup battery beside the board. How does it compare to the MW250?Both suit Solution 2000/3000 panels; the ICP-SOL-ENC ships in white while the MW250 is the classic Bosch box — choose the finish that best suits your install location. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $54.00

• 

  Bosch Bosch ISC-BPQ2-W12 — Blue Line Gen2 Hardwired Quad PIR Motion Sensor (12x12m)

  Blue Line Gen2 · Hardwired Quad PIR · 12x12m · Dynamic Temp CompensationBlue Line Gen2 Quad PIRISC-BPQ2-W12 Hardwired Quad PIR Sensor — Australian Stock & 3-Year Warranty The Bosch ISC-BPQ2-W12 is a Blue Line Gen2 hardwired quad PIR motion detector engineered for dependable 12m x 12m wall-to-wall indoor coverage. Its four-element quad sensing plus Dynamic Temperature Compensation delivers superior catch performance in changing conditions, while flexible mounting height with no adjustments and a self-locking enclosure with integrated bubble level cut installation time. Ideal for homes, offices, shops and warehouses running Bosch Solution alarm systems, every unit ships from Australian stock with a 3-year Australian warranty. Coverage 12m x 12m Detection Quad PIR Output N/C Relay + Tamper Power 9-15 VDC, 10mA Quad Element Sensing Four-element quad PIR delivers wall-to-wall catch performance and dependable detection across the full 12m x 12m field. Dynamic Temp Compensation Automatically adapts to ambient temperature changes so catch performance stays strong in any environment. Faster Installation Self-locking enclosure with integrated bubble level and flexible mount height without adjustments reduces install time and false alarms. Bosch Solution Ready Supervised N/C relay and tamper outputs wire straight into Bosch Solution 2000/3000/6000 hardwired zones. Technical Specifications Model / SKU ISC-BPQ2-W12 (Blue Line Gen2) Sensor Type Quad PIR Detection Radius 12m (12m x 12m area) Alarm Relay N/C Tamper Relay N/C Current Consumption 10 mA Operating Temperature -30°C to 55°C Dimensions (H x W x D) 105 x 61 x 44 mm Warranty 3 Years (Australia) Downloads ISC-BPQ2-W12 DatasheetBosch Quad PIR Sensor Quick Start GuideBosch Quad PIR Sensor User Manual Frequently Asked Questions What is a quad PIR sensor?A quad PIR uses four sensing elements instead of two, improving catch performance and consistency across the detection field while helping reject nuisance triggers. What coverage does the ISC-BPQ2-W12 provide?It provides 12m x 12m wall-to-wall coverage, suiting standard rooms, offices, retail and warehouse zones. What voltage and current does it need?It runs on 9-15 VDC and draws around 10 mA, with N/C alarm and N/C tamper relay outputs for standard wired zones. What mounting height is recommended?It offers flexible mounting height with no adjustments required, and the integrated bubble level helps you level it quickly during install. Which Bosch panels does it work with?It suits Bosch Solution 2000, Solution 3000 and Solution 6000 panels using standard hardwired alarm inputs. Is it pet-friendly?The ISC-BPQ2-W12 is a standard quad PIR. For pet immunity choose a Bosch pet-friendly model such as the ISC-BPR2-WP12. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $49.00

• 

  Bosch Bosch MY368AU — Solution 6000 3G/4G + Ethernet Module (MyAlarm SIM)

  Genuine Bosch · 3G/4G + Ethernet · MyAlarm SIMBosch MY368AUMY368AU Solution 6000 3G/4G + Ethernet Module — Australian Stock & 3-Year Warranty The Bosch MY368AU is a plug-in communication module that adds 3G/4G cellular reporting and built-in Ethernet to the Bosch Solution 6000, supplied for use with a MyAlarm SIM subscription for reliable, ready-to-go monitored connectivity. It delivers fast, dependable dual-path communication so your system stays connected for real-time monitoring and app control. The MY368AU requires panel firmware version 2.51.04 or higher and an active MyAlarm SIM subscription. Backed by our 3-year Australian warranty and local tech support. Cellular 3G / 4G Network Built-in Ethernet SIM MyAlarm subscription Panel FW v2.51.04+ Dual Communication Paths Combines 3G/4G cellular and built-in Ethernet for redundant, always-connected alarm reporting. MyAlarm SIM Ready Supplied for use with a MyAlarm SIM subscription so monitored connectivity is ready to activate. Real-Time Monitoring Reliable, fast connectivity keeps your Solution 6000 online for live monitoring and app control. Latest Panel Features Unlocks the newest panel features when running firmware version 2.51.04 or higher. Technical Specifications Model / SKU Bosch MY368AU Type Plug-in 3G/4G + Ethernet communication module Cellular 3G / 4G (MyAlarm SIM) Network Built-in Ethernet SIM MyAlarm SIM subscription required Panel Firmware Version 2.51.04 or higher Mounting Enclosure-mounted PCB Compatible Panels Solution 6000 Warranty 3 Years (Australia) Downloads MY368AU DatasheetBosch Communication Module Quick Start GuideBosch MY368AU Installer Manual Frequently Asked Questions Which panel does the MY368AU fit?It is a plug-in module for the Bosch Solution 6000 alarm panel. Do I need a SIM subscription?Yes. The MY368AU is supplied for use with a MyAlarm SIM subscription, which must be active for cellular reporting. What panel firmware is required?The panel must be running firmware version 2.51.04 or higher to support the MY368AU. How is this different from the CM368B?Same module family: the MY368AU uses a MyAlarm SIM subscription, whereas the CM368B is BYO SIM. Does it provide both cellular and IP?Yes. It combines 3G/4G cellular with built-in Ethernet for dual-path monitored communication. What's in the box?The MY368AU module PCB. The MyAlarm SIM subscription is arranged separately. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

  $200.00

• Save $20.01

  Ubiquiti Ubiquiti UniFi Protect ViewPort PoE HDMI Adapter (UP-Viewport)

  1 review

  UniFi Protect · NDAA Compliant Ubiquiti UniFi Protect ViewPort PoE HDMI Adapter (UP-Viewport) The UniFi Protect ViewPort (UP-Viewport) connects a UniFi Protect camera system to an HDMI television or monitor, providing a dedicated live surveillance display without requiring a computer. It supports flexible camera layouts with up to a 16-stream matrix view and HDMI output up to 4K at 30 FPS. Video Output HDMI up to 4K/30 FPS Live View Up to 16 Streams Network & Power Gigabit PoE Model UP-Viewport Purpose-Built UniFi Protect Display Use the ViewPort at a reception desk, security office, control room, retail counter or other monitoring point. After adoption in UniFi Protect, select the required camera-view layout and display it on a connected HDMI screen. The compact adapter can mount discreetly behind a television or monitor. 4K HDMI OutputOutputs UniFi Protect live views to a compatible HDMI display at up to 4K resolution and 30 frames per second. 16-Stream MatrixSupports flexible multi-camera layouts containing up to 16 simultaneous Protect camera streams. Single-Cable PoEA Gigabit Ethernet connection supplies network connectivity and PoE power, reducing cabling at the display. Dedicated Live ViewDisplays camera feeds without leaving a computer connected to the television or monitor. Flexible MountingThe included TV mount allows discreet placement behind a compatible display. UniFi Protect ManagedConfiguration and camera-view selection are managed through the UniFi Protect web application or mobile app. Technical Specifications Official model UP-Viewport Function UniFi Protect camera-feed viewer for HDMI displays HDMI output Up to 4K at 30 FPS Matrix view Up to 16 camera streams Networking (1) GbE RJ45 port Power method PoE Maximum power consumption 9.5 W Dimensions 157 × 52 × 37 mm Weight 230 g without mount; 252 g with TV mount Operating temperature 0 to 40°C Operating humidity 20–80% non-condensing Compliance NDAA compliant Application UniFi Protect web, iOS and Android What You Need A working UniFi Protect deployment with compatible Protect cameras. A PoE network connection. A PoE switch or injector is required and is not included unless specifically stated. An HDMI television or monitor and an HDMI cable. The display and HDMI cable are sold separately. What's Included 1 × UniFi Protect ViewPort (UP-Viewport) TV/display mounting hardware supplied by Ubiquiti Downloads & Resources Official Ubiquiti Specifications Frequently Asked Questions Does the ViewPort record footage?No. It is a viewing adapter. Recording and storage are provided by your compatible UniFi Protect console or NVR. Can it display multiple cameras?Yes. It supports matrix layouts containing up to 16 Protect camera streams. Does it require separate power?No local power adapter is required when connected to a compatible PoE source. Is an HDMI cable included?No. Use a suitable HDMI cable for the required resolution and installation distance.

  Read more less

  $470.00 $449.99

Show more products