Mifare Key Fob, 13.56MHz Working Frequency IC card ( Mifare card) with frequency 13.56MHz Public transportation Access management Electronic toll collection Car parking Loyalty programs

Read more less

Dahua Access Control Extension Module DHI-DEE1010B-S2 Used to expand access control functions by working with access control terminal and door station. Supports RS-485 communication. Connects to electronic or magnetic locks to bolster security. Offers 3 indicators to indicate when the device is on or off, functioning, and the status of the door. Specifications Port RS-485 2 Exit Button 1 Door Status Detection 1 Lock Control 1 General Power Supply 12 VDC, 1 A Power Consumption ≤ 0.9 W (standby), ≤ 1 W (working) Product Dimensions 58.2 mm × 49.2 mm × 20.2 mm (2.29" × 1.94" × 0.8") (W × H × D) Operating Temperature –10 °C to +60 °C (+14 °F to +140 °F) Operating Humidity 0%–95% (RH), non-condensing Net Weight 0.09 kg (0.20 lb) Gross Weight 0.12 kg (0.26 lb) Certifications CE; FCC Downloads DEE1010B-S2_datasheet_20220316 Access Control Extension Module_User's Manual_V1.0.0

Read more less

Dahua A-Mifare Card for Intercom Access, 13.56MHz Working Frequency IC card ( Mifare card) with frequency 13.56MHz Public transportation Access management Electronic toll collection Car parking Loyalty programs

Read more less

Hikvision Intercom, Gen 2, Keypad Module, Stainless Steel (KD-KP), KD8 Series Pro Modular Door Station, HIK-DS-KD-KP-STAINLESS Keypad module of modular door station Supporting input pin code to open door, call indoor station IP65 and IK07 higher protection level Backlight compensation behind the keypad buttons Easy to use and extend Stainless Steel high quality material DownloadDatasheet

Read more less

Stainless Steel | IP65 | Green LED | 1-Year Warranty WEL1911 SECOR Press-to-Exit Button — Stainless Steel, IP65, Green LED, Flying Leads The SECOR WEL1911 is a flush-mount stainless steel press-to-exit button engineered for Australian commercial, industrial and residential access control installations. With an IP65-rated housing, isolated NO and NC contacts, a high-visibility green illuminated LED ring, and a tested mechanical life of 1,000,000 cycles, the WEL1911 is the dependable request-to-exit (REX) device that finishes off a clean, professional door — from glass-front offices in Sydney CBD to back-of-house plant rooms in Perth and Brisbane warehouses. Supplied with flying leads for fast termination and rated to switch up to 2 A at 12 or 24 V DC, the WEL1911 is fully compatible with any standard maglock, electric strike or access controller — including Tecom Challenger, Inner Range Integriti/Inception, Gallagher, Paxton, ICT Protege and standalone keypads such as the SECOR WKP-series. Ingress Protection IP65 Rated Switching Capacity 2 A @ 12/24 V DC Mechanical Life 1,000,000 Cycles Plate Material 304 Stainless Steel Built for Australian Access Control Installations The WEL1911 is a fully isolated dry-contact exit button — meaning both the NO (Normally Open) and NC (Normally Closed) contacts are independent of the LED supply. That isolation lets installers wire the button directly into a fail-safe maglock loop, a fail-secure strike circuit, or as a request-to-exit input on any Australian access control panel without needing relays, diodes or protective interfaces. The illuminated green LED halo stays visible day or night and gives users an obvious visual cue at the door — reducing tailgating attempts and unnecessary calls to facilities teams. Combined with a contact resistance of ≤50 mΩ and an insulation resistance over 100 MΩ, the WEL1911 delivers the kind of long-term electrical reliability you expect from a piece of door hardware that may be pressed dozens of times a day for the next decade. Stainless Steel Flush Mount Vandal-resistant 304-grade stainless plate. Flush mounts cleanly into wall boxes or door frames for a discreet, modern look that suits any commercial fit-out. IP65 Weather Sealed Dust-tight and protected against low-pressure water jets. Suitable for sheltered outdoor exits, loading docks, car-park entries and food-handling areas. Isolated NO & NC Contacts Both contacts are electrically isolated from the LED, allowing safe integration with fail-safe maglocks, fail-secure strikes and access controller REX inputs. Green LED Halo High-brightness 12–24 V LED illumination clearly marks the exit point at all times. Red and blue LED variants are available on request. 1,000,000 Cycle Mechanical Life Heavy-duty switch mechanism rated for 50,000 electrical cycles at full load and 1 million mechanical actuations — proven longevity for high-traffic doors. Flying Lead Termination Pre-terminated flying leads simplify wiring and reduce installation time. No fiddly screw terminals on the back of the plate, no specialty tools required. Compatible with Every Australian Access Control Brand Because the WEL1911 outputs dry contact closures only, it is panel-agnostic. Wire the NO contact across the REX input of any Australian access controller, or break the NC contact in series with a maglock loop for instant manual override. Common deployments include: Tecom Challenger / Inner Range Wire NO across the “Request to Exit” input on the TS1061, ELM or Inception module. Door event log entries identify the exit press automatically. Gallagher Command Centre Connect to the REX input on any Gallagher controller (Controller 6000/7000, T-series). Configure as Monitor Exit or Free Exit per door policy. Paxton Net2 & ICT Protege Standard NO closure to the Exit input on Net2 plus / Protege GX/WX. Supports timed and momentary exit modes. Standalone Maglock + Keypad Break the NC contact in line with the maglock 12/24 V DC supply for a wire-only manual override — no controller required. Technical Specifications Model WEL1911 (SECOR) Device Type Press-to-exit / Request-to-exit (REX) button Plate Material 304-grade Stainless Steel, flush mount LED Colour Green (Red and Blue variants available on request) Ingress Protection IP65 — dust-tight, protected against water jets Contact Configuration 1 × NO and 1 × NC, fully isolated dry contacts Maximum Switching Current 2 A @ 12 or 24 V DC Minimum Switching Current 5 mA Contact Resistance ≤50 mΩ Insulation Resistance >100 MΩ Electrical Life 50,000 cycles at rated load Mechanical Life 1,000,000 cycles LED Operating Voltage 12 V or 24 V DC Termination Flying leads (pre-terminated) Dimensions (Large Plate) 70 mm (W) × 115 mm (H) × 32 mm (D) Dimensions (Compact Plate) 30 mm (W) × 75 mm (H) × 32 mm (D) Mounting Flush wall-box or surface (compatible with standard AU electrical boxes) Warranty 1-Year manufacturer warranty Compliance RoHS, CE Country of Sale Australia only — supported by CCTV Guru Where to Use the WEL1911 Office & Tenancy Doors Flush-mounted next to glass entry doors, server rooms and reception areas. Stainless steel finish blends with modern fit-outs and brushed metal door hardware. Industrial & Warehouse IP65 rating handles dust, splash and wash-down zones. Heavy-duty switch withstands gloved-hand operation and high-frequency traffic. Retail & Hospitality Discreet green LED marks staff-only exits in stockrooms, kitchens and back-of-house corridors. Tamper-resistant when correctly recessed. Healthcare & Aged Care Smooth stainless plate is easy to clean and disinfect. Suitable for medical-grade clean zones and infection-control corridors. Wiring Quick Reference Standard REX Wiring (Access Controller) Connect the two NO flying leads across the controller’s REX / Exit input. Connect the LED+ and LED− leads to a 12 or 24 V DC source matching your installation voltage. Pressing the button momentarily closes the NO contact and grants exit on most Australian access control platforms. Direct Maglock Override (No Controller) Wire the NC contact in series with the 12/24 V DC supply to the maglock. Pressing the button opens the contact and de-energises the lock for the duration of the press — ideal for small-budget standalone maglock installations. Frequently Asked Questions Is the WEL1911 weatherproof for outdoor use? The IP65 rating protects against dust ingress and low-pressure water jets, making it suitable for sheltered outdoor exits, covered loading docks and entry porticos. For full open-weather exposure, install under an eave or canopy for maximum service life. What voltage does the LED need? The integrated LED runs on either 12 V or 24 V DC — just match it to your access control or lock power supply. No external resistor required. Will the WEL1911 work with my maglock? Yes. The fully isolated NO/NC contacts handle up to 2 A at 12/24 V DC, which covers nearly every Australian maglock and electric strike on the market. For fail-safe maglocks, wire the NC contact in series with the lock supply; for access controllers, use the NO contact across the REX input. Can I get this button with a red or blue LED? Yes. The WEL1911 is also available with red or blue LED variants on request. Contact CCTV Guru if you need a colour other than the standard green. What size wall box do I need? The large 70 mm × 115 mm plate fits a standard single-gang Australian wall box. The compact 30 mm × 75 mm plate suits door frames, mullions and narrow architrave applications. How long does the button last? Tested to 50,000 electrical cycles at full rated load and 1,000,000 mechanical cycles. Even at 200 presses a day, that’s well over a decade of dependable service. IP65 Rated 1-Year Warranty Australian Stock

Read more less

Standalone Access Control | HID Prox + EM | Multi-Mode WKP20 Standalone Door Controller with HID Prox and EM Card Reader Keypad The WKP20 is a metal-housed standalone access controller built on a 32-bit ARM processor, combining a backlit keypad with an integrated 125 kHz HID Prox and EM proximity card reader in a single weather-resistant housing. Designed for Australian commercial, industrial and residential entry doors, it supports up to 20,000 user credentials, multi-mode operation (Single-door, Double-door, Interlock, Reader / Wiegand pass-through and Demo), and full Wiegand 26–66 bit output for integration with Tecom Challenger, Inner Range, Gallagher, Paxton, ICT Protege and other Australian access control platforms. Deploy the WKP20 as a complete standalone door controller with onboard 1A relay, or convert it instantly to a Wiegand keypad/reader for third-party head-end systems via the TS1061-Dual Wiegand Interface. Self-adaption infrared anti-tamper, anti-duress credential support, multi-card unlock, super-open password, anti-crack lockout and configurable facility/site code make it suitable for everything from a back-of-house storeroom to a high-security access point. User Capacity 20,000 Users Credential Support HID Prox + EM 125kHz Operating Modes 5 Modes Built-in Wiegand Output 26 – 66 Bit Configurable Why Australian Installers Choose the WKP20 The WKP20 solves a problem most low-cost keypads cannot: it is genuinely multi-mode. The same hardware can run a fully standalone single door this morning, become the second leaf of a Double-door deployment this afternoon, and be reconfigured as a pure Wiegand pass-through reader for a Tecom Challenger panel by the end of the day — without changing a single wire. For Australian integrators stocking access control gear, that means fewer SKUs, faster jobs and a serious safety net when site requirements shift mid-install. It is built around a 32-bit ARM microcontroller with self-adaption infrared anti-demolition detection, an alarm/doorbell MOS output, NO/NC/COM relay rated to 1 A, and an operating envelope of −40 °C to +60 °C — comfortable for outdoor entries through Australia’s harshest climates, from Darwin loading docks to Hobart rear gates. Five Built-in Operating Modes Switch between Single-door, Double-door, Interlock, Reader (Wiegand pass-through) and Demo mode from the keypad — no software, no programmer. HID + EM Dual Format Reads 125 kHz HID Prox and EM credentials simultaneously, or restrict to a single format. Reader range up to 5 cm. 20,000 Users & 21 Admin Cards Programme by card, PIN, Card + PIN, or Multi-card unlock (2–10 cards in sequence). Admin cards include Set, Add, Delete, Super-open, Anti-duress, Authorisation and Normal-open. Infrared Anti-Tamper 24/7 Self-adaption infrared sensing detects illegal dismantle attempts day or night and triggers the onboard MOS alarm output (up to 1 A) — immune to visible-light interference. Anti-Crack Lockout Configurable wrong-attempt threshold (1–10) with alarm-only or full keypad/reader lockout for 1–99 minutes. Stops brute-force PIN and card scanning attacks dead. Wiegand 26 – 66 Bit Output Configurable site/facility code (0–255), parity (EO or none), plus RS232-TTL HEX / ASCII-8 / ASCII-10 output for integration with virtually any Australian access head-end. Integration with Tecom Challenger & Third-Party Panels Set the WKP20 to Reader mode and it becomes a pure Wiegand 26-bit pass-through reader for Tecom Challenger via the TS1061-Dual Wiegand Interface, Inner Range Integriti / Inception, Gallagher Command Centre, Paxton Net2, ICT Protege GX/WX and any other Wiegand-input controller. PIN entries are converted to Wiegand card data using the configurable facility/site code (1–255), so users can be enrolled as card holders even when no physical card is presented. Three external control wires (LED_R, LED_G, BEEP) accept low-level inputs from the host controller, so the WKP20’s red/green LED status and buzzer can be driven directly by the Tecom or Inner Range panel for full event feedback at the door. Australian Integrator Note When connecting the WKP20 to a TS1061-Dual Wiegand Interface on the main Challenger LAN as a “Standard Door”, PIN data is converted to Card Data using the programmed facility code. Factory-default the unit, set machine mode 03→0 (Reader), Wiegand output 64→4, and program facility code 60→(1–255) before connecting to the head-end. Full programming flow is in the Quick Setup Cheatsheet (download below). Security Features Built for Australian Compliance Anti-Duress Card A designated duress credential opens the door while silently activating the MOS alarm output — for retail, banking and aged-care applications where forced entry is a real threat. Super-Open Password 8-digit highest-priority unlock that overrides any user restriction, multi-card requirement or disabled-user state. Critical for emergency services and after-hours response. Normal-Open Card Toggle the door into Normal-Open mode with a tap — ideal for store opening hours, delivery windows or fire-drill events. Authorisation (Header) Card Globally enable or disable all users at the tap of one card. Lock the door down for cleaning, public-holiday closures or security incidents in seconds. Installation, Wiring & Power The WKP20 ships with a 12-core flying lead and accepts either 10–28 V DC (Red/Black) or 10–28 V AC (Red/Light-green, non-polarised). Standby current is ≤35 mA at 12 V DC and operating current is ≤100 mA, which means a single 2 A access-control PSU can power the controller, an electric strike or maglock, plus an exit button and door contact without breaking a sweat. NO/NC/COM dry-contact relay output (1 A) drives the lock directly for low-current strikes, or a dedicated lock power supply for fail-safe maglocks. The grey ALARM(BELL) lead is a MOS drain output sinking up to 1 A — wire it straight to an external siren, a strobe, or a doorbell decoder for two-in-one keypad & doorbell duty. Technical Specifications Model WKP20 Device Type Standalone Access Controller with integrated keypad & proximity reader Credential Formats HID Prox 125 kHz, EM 125 kHz, PIN (4–6 digit zone 1 / 7 digit zone 2) User Capacity 20,000 user credentials + 21 admin cards Operating Modes Single-door, Double-door, Interlock, Reader (Wiegand pass-through), Demo Processor 32-bit ARM core Working Voltage 10–28 V AC (non-polarised) or 10–28 V DC Standby Current ≤35 mA @ 12 V DC Operating Current ≤100 mA @ 12 V DC Onboard Relay NO / NC / COM dry contact, rated 1 A Alarm / Doorbell Output MOS drain, active low, drives up to 1 A Wiegand Output Configurable 26–66 bit, with or without parity (EO format) RS232-TTL Output HEX, ASCII-8 or ASCII-10 formats selectable Facility / Site Code Programmable 0–255 Reader Range Up to 5 cm (HID Prox & EM) Open Time 50 ms instantaneous, or 1–999 seconds programmable (default 2 s) Anti-Crack 1–10 wrong attempts → alarm or lockout 1–99 minutes Anti-Tamper Self-adaption infrared, 24/7 detection, immune to visible light Operating Temperature −40 °C to +60 °C Operating Humidity 0–95% (non-condensing) Housing Zinc-alloy metal, anti-vandal, with anti-demolition screw Keypad 12-key metal backlit, brightness & volume adjustable Doorbell Function “#” key configurable as doorbell with internal “ding-dong” tone Default Admin PIN 888888 (must be changed before programming) Compliance RoHS, CE Country of Sale Australia only — supported by CCTV Guru What’s in the Box 1 × WKP20 Standalone Door Controller (HID Prox + EM) 1 × Mounting plate with four self-tapping screws and plastic wall plugs 1 × Anti-demolition Torx screw & matching security screwdriver bit 1 × Pre-terminated 12-core flying lead loom 1 × Quick Setup Cheatsheet 1 × Full WKP20 User Manual (download) Recommended Use Cases Office & Warehouse Entry Standalone Single-door mode with HID Prox cards, exit button and electric strike. Up to 20,000 staff supported — no PC, no software, no licence fees. Tecom Challenger Door Reader mode + TS1061-Dual Wiegand Interface on Challenger LAN. WKP20 acts as Wiegand 26-bit reader with PIN-to-card conversion. High-Security Interlock Two WKP20 units in Interlock mode for clean rooms, cash rooms, secure pharmacy storage or mantrap-style entries. Retrofit Upgrade Drop-in replacement for legacy single-format keypads — keep your existing HID Prox or EM credentials with zero re-enrolment. Frequently Asked Questions Does the WKP20 work with Tecom Challenger? Yes. Set the WKP20 to Reader mode (03→0), Wiegand output 64→4 (1–5 digit key + # buffered, 26-bit) and configure a facility code (60→1–255). Connect to a TS1061-Dual Wiegand Interface on the Challenger LAN. What credential formats are supported? 125 kHz HID Prox and 125 kHz EM cards/fobs. You can also restrict the reader to read only HID, only EM, or both via menu 04. PIN-only operation is also supported. Can it run two doors from one unit? Yes. Set Double-door mode (03→2) and the WKP20 manages two independent zones with separate user lists, super-open passwords and admin cards using a single physical keypad. What happens if I forget the admin password? Two recovery methods: (1) Power-cycle while holding the # key to reset Admin PIN to 888888 without wiping users; or (2) hold the * key while powering on to perform a full factory reset (admin cards and user data are retained). Is it weatherproof for outdoor Australian conditions? The metal-housed WKP20 is rated for −40 °C to +60 °C operation. For full outdoor exposure in heavy rain or coastal salt-spray locations, install under a small eave or use a rain hood for maximum service life. Does the keypad have anti-tamper protection? Yes — self-adaption infrared anti-demolition detection runs 24/7. When the unit is removed from the wall plate it triggers an audible alarm and the MOS alarm output, regardless of ambient light conditions. Is there an anti-passback or brute-force protection? Anti-crack lockout is built in. Configure 1–10 wrong attempts and the keypad either alarms (43→1) or locks completely (43→2) for 1–99 minutes — stopping random PIN guessing and card scanning attacks. Do you offer warranty and support in Australia? Yes. CCTV Guru supplies the WKP20 with full local warranty, Australian-based technical support and access control commissioning advice for installers and end users across all states and territories. Downloads & Documentation WKP20 Datasheet (PDF) WKP20 User Manual Australian Stock 12-Month Warranty Free Tech Support

Read more less

The UniFi Access G3 Reader is a robust contactless door access reader supporting NFC cards, mobile BLE access, and optional PIN codes. Available in Black or White, it seamlessly integrates with the UniFi Access ecosystem for modern access control without licence fees. Compact & Secure Door Access Reader The UniFi Access G3 Reader provides secure, scalable access control for offices, apartments, retail spaces, and commercial entrances. Designed to deliver multiple authentication options — NFC cards, mobile BLE passes, and PIN codes — it enhances both convenience and security for access-controlled doors. What’s more, the G3 Reader is available in two stylish finishes — Black and White — allowing customers to choose the best aesthetic match for their environment. Multi-Mode Authentication Supports Modern Workflows With support for: NFC cards & key fobs Mobile access (BLE) Optional PIN entry the G3 Reader solves access needs for employees, residents, and visitors alike, while simplifying credential management via the UniFi Access application. PoE Powered & Easy Integration Powered via Power over Ethernet (802.3af PoE), the reader installs cleanly using a single cable for power and data. It works seamlessly with UniFi Access Hubs and controllers, enabling centralised management through the UniFi Access app or cloud portal — all with no ongoing subscription fees. Ideal for Commercial Deployments Whether you’re securing office doors, apartment foyers, reception areas, or internal zones, the UniFi Access G3 Reader is engineered for reliability, performance, and professional installations. Key Features & Benefits UniFi Access G3 contactless reader Supports NFC cards, mobile BLE & PIN PoE powered (802.3af) – no separate power supply Available in Black and White finishes Seamless integration with UniFi Access Hub Centralised management via UniFi Access app Scales with multiple readers & credentials No licence or subscription fees NDAA compliant – enterprise ready What’s in the Box UniFi Access G3 Reader (Black or White) Wall/surface mounting bracket Screws & anchors Quick-start guideNote: UniFi Access Hub, credentials, and door hardware are sold separately. Technical Specifications Specification Details Model UniFi Access G3 Reader (UA-G3) Authentication NFC cards, mobile BLE, optional PIN Power PoE (802.3af) Colours Available Black, White Compatible With UniFi Access Hub & Controllers Management UniFi Access app & web console Use Cases Door access control (commercial, residential) Compliance NDAA compliant FAQs Q: What authentication methods does the UniFi Access G3 Reader support?A: It supports NFC cards, mobile BLE access, and optional PIN code entry. Q: Is the G3 Reader available in multiple colours?A: Yes — available in Black and White finishes. Q: Does this reader require a subscription?A: No. UniFi Access is licence-free and managed via the UniFi Access app. Q: Can I use multiple G3 Readers in one installation?A: Yes. Multiple readers can be deployed and centrally managed. More Information Installation Guide

Read more less

The Hikvision DS‑K1T344MBWX‑E1 is a high‑performance face recognition access terminal featuring a 4.5″ touch LCD screen, dual 2 MP wide‑angle cameras, and support for face, card & PIN authentication. Built for reliable access control with fast face recognition (≤ 0.2 s per user) and capacity for up to 3,000 faces and 3,000 cards. Key Features 4.5″ Touch LCD Interface for intuitive user interaction.  Dual 2 MP wide‑angle cameras for reliable face capture.  Fast Face Recognition: Recognition distance ~0.3 – 1.5 m, ≤ 0.2 s/user, ≥ 99 % accuracy.  Large Capacity: Store up to 3,000 faces & 3,000 cards.  Supports face, M1 card & PIN code authentication.  Two‑way audio with indoor/main station support.  Configurable via mobile web and PC web interface.  PoE (IEEE 802.3at) and 12 V DC power options; can power door locks.  Wi‑Fi & Bluetooth support for flexible connectivity.  IP65‑rated housing for outdoor or indoor installation. Technical Specifications  Specification Details Model DS‑K1T344MBWX‑E1 Display 4.5″ LCD Touchscreen, 480 × 854 Cameras Dual 2 MP wide‑angle lenses Recognition Face Recognition 0.3 – 1.5 m, ≤ 0.2 s/user Capacity Up to 3,000 faces & 3,000 cards Authentication Face, M1 card, PIN Audio Two‑way audio support Network Ethernet 10/100 Mbps, Wi‑Fi, Bluetooth Power PoE IEEE 802.3at or 12 V DC Protection IP65 outdoor‑ready Interfaces RS‑485, Wiegand, Alarm I/O, USB, Door/Exit Inputs Operating Temp. Typically 0–45 °C (varies by setup) More Information DS-K1T344MBWX-E1 Datasheet DS-K1T344MBWX-E1 Quick Start Guide DS-K1T344MBWX-E1 Dimension

Read more less

Hikvision Access Control Terminal, Intercom Camera, Keypad, Mifare Reader, Wifi, IP65, IK09, Access Control Terminal, HIK-AXS-K1T502DBWX-C Features Manage access control and intercom functions in one device IP65 & IK09 protections, as well as increased stability with zinc alloy materials Supports multiple authentication methods (card, PIN, etc.) Remote control via the Hik-Connect mobile app Connects to external access controller via Wiegand protocol Video intercom via SIP protocol. Supported SIP server: Brekeke, miniSipServer,FreePBX, Asterisk, 3CX, ELASTIX, and PBX ware RS-485 communication for connecting external card reader and calling elevator Supports AP mode Press calling button to call one of the following objects: management center, indoor station, specified indoor station, or Hik-Connect App Supports up to 256 GB SD card memory Supports PIN settings under platform mode and local mode Setting the priority of wired network and wireless network is available DownloadDS-K1T502DBWX-C Datasheet

Read more less

Hikvision 4" Touch Screen Digital Display With Keypad, Mifare Reader, IP65, IK8, HIK-DS-KD-TDM Hikvision Touch Display Module With Mifare Card Reader Modular Door Station Touch&Display Module, Needs Mouting Bracket 4 Inch Touch Screen, IP65Ik8 Dial Number Display, Pin Code & Card Unlock, Contact List & Advertisement Display Stores And Searches Contact List Multiple Languages Vendor Code: DS-KD-Tdm

Read more less

The UniFi Access G3 Starter Kit Pro (UA-G3-SK-Pro) is a complete professional access control solution featuring PoE-powered hub, premium G3 Reader Pro (with camera & optional intercom), NFC credentials, and accessories — perfect for offices, commercial buildings, and secure entry points with no recurring licence fees. Pro-Grade Door Access Control Kit The UniFi Access G3 Starter Kit Pro delivers everything you need to deploy a high-performance door access system using the Ubiquiti UniFi Access platform. This kit combines secure authentication, visual verification, and robust hardware to deliver a professional access control setup — without the complexity or ongoing licence fees. G3 Reader Pro with Camera & Intercom At the heart of this kit is the UniFi Access G3 Reader Pro, a premium access reader featuring: Integrated camera for visual verification Two-way intercom support Large touchscreen interface Multi-factor authentication Combined with NFC credentials and mobile BLE access support, this reader elevates security and interaction for visitors, staff, and guests. PoE Powered Hub & Easy Integration The included UniFi Access Hub manages all connected components — such as readers, sensors, and locks — using PoE (Power over Ethernet) for simplified installation. Admin can configure users, permissions, and access schedules from the unified UniFi Access application (web or mobile), eliminating recurring fees or subscriptions. Built for Commercial Deployment Whether you’re securing an office entry, reception door, or controlled internal access point, this Pro Kit offers enterprise-ready performance with visual verification and enhanced interaction. Key Features & Benefits Professional UniFi Access starter kit (Pro) Includes G3 Reader Pro with camera & intercom PoE-powered Access Hub EFI NFC access cards included Supports mobile BLE & PIN entry Visual verification via live camera feed Centralised management via UniFi Access app No licence or subscription fees Scales with additional readers & credentials Enterprise / NDAA compliant What’s in the Box UniFi Access Hub (PoE powered) UniFi Access G3 Reader Pro UniFi NFC access cards (starter pack) Mounting hardware & accessories Quick-start installation guideNote: Electric lock hardware and additional accessories are sold separately. Technical Specifications Specification Details Starter Kit Pro SKU UA-G3-SK-Pro Access Controller UniFi Access Hub (PoE) Access Reader UniFi Access G3 Reader Pro Reader Features Camera, intercom, touchscreen Credentials UniFi NFC access cards (included) Authentication NFC, Mobile BLE, PIN Power PoE (802.3af) Management UniFi Access app & web portal Use Case Professional door access control Compliance NDAA compliant FAQs Q: What is included in the UA-G3-SK-Pro kit?A: It includes the UniFi Access Hub, G3 Reader Pro (with camera & intercom), NFC access cards, and installation hardware. Q: Do I need a subscription for management?A: No. The UniFi Access starter kit pro uses a licence-free access control platform. Q: What authentication methods are supported?A: It supports NFC cards, mobile BLE access, and PIN entry. Q: Can this kit be expanded later?A: Yes. You can add additional readers, credentials, sensors and locks as needed. More Information UniFi Access G3 Starter Kit Pro Installation Guide

Read more less

Get started with professional access control using the UniFi Access G3 Starter Kit (UA-G3-SK). This all-in-one kit includes a PoE-powered Access Hub, G3 Reader, NFC credentials and mounting hardware — everything you need to secure a single door with contactless entry and modern authentication. Complete Door Access Solution The UniFi Access G3 Starter Kit (UA-G3-SK) is a ready-to-deploy door access control bundle designed for offices, retail, residential and commercial buildings. Built on the Ubiquiti UniFi Access ecosystem, this kit combines easy installation with powerful access management capabilities and zero recurring licence fees. What’s Included The starter kit simplifies access control by including all major components needed for a secure door installation: UniFi Access Hub – PoE powered controller UniFi Access G3 Reader – Contactless access reader UniFi NFC Cards – Credentials for staff, visitors & tenants Mounting hardware – Wall/door installation kit These components work together to provide secure, contactless door access with the flexibility to add more readers or credentials as your system grows. Key Features & Benefits All-in-one UniFi Access starter kit PoE powered Hub for simple installation G3 Reader supports NFC & mobile access Includes NFC Access Cards Centralised management via UniFi Access app No licence or subscription fees Scalable — add more readers and credentials NDAA compliant — enterprise-ready What’s in the Box 1 × UniFi Access Hub 1 × UniFi Access G3 Reader UniFi NFC Access Cards (starter pack) Mounting hardware & screws Quick-start guideNote: Electric lock hardware and additional accessories sold separately. Technical Specifications Component Specification Starter Kit SKU UA-G3-SK Access Reader UniFi Access G3 Reader Controller UniFi Access Hub (PoE) Credentials NFC Access Cards (Qty included) Authentication NFC cards, mobile BLE access Power PoE (802.3af) Management UniFi Access app & web portal Use Case Single-door access control Compliance NDAA compliant FAQs Q: What is included in the UA-G3-SK Starter Kit?A: It includes a PoE-powered UniFi Access Hub, a G3 Reader, NFC access cards, and mounting hardware. Q: Do I need a subscription?A: No — UniFi Access starts with zero licence or subscription fees. Q: Can I expand this kit later?A: Yes — additional readers, credentials, and accessories can be added. More Information UniFi Access G3 Starter Kit Installation Guide

Read more less

The UniFi Access Door Hub Mini (UA-Hub-Door-Mini) is a compact, PoE-powered controller designed for single-door access control. Built for the Ubiquiti UniFi Access ecosystem, it provides reliable control of electric locks, sensors, and access readers — perfect for offices, retail spaces, and small commercial deployments with no ongoing licence fees. Key Features & Benefits Compact UniFi Access door controller Designed for single-door deployments PoE powered (single-cable installation) Relay output for electric locks & strikes Inputs for door sensor & REX button Supports UniFi Access Readers Centralised management via UniFi Access No licence or subscription fees NDAA compliant – enterprise ready What’s in the Box UniFi Access Door Hub Mini (UA-Hub-Door-Mini) Mounting hardware Quick-start installation guide Note: Door lock hardware, access readers, and credentials are sold separately. Technical Specifications Specification Details Model UA-Hub-Door-Mini Solution Type Single-door access controller Power PoE (802.3af) Relay Outputs 1 × Door lock relay Inputs Door sensor, request-to-exit (REX) Reader Support UniFi Access Readers Authentication NFC, BLE mobile access, PIN Management UniFi Access app & web console Use Case Single-door access control Compliance NDAA compliant FAQs Q: What is the UA-Hub-Door-Mini used for?A: It is a compact controller for managing a single access-controlled door using UniFi Access readers and locks. Q: Does it require a subscription?A: No. UniFi Access is licence-free. Q: What’s the difference between Door Hub and Door Hub Mini?A: The Mini offers a smaller form factor and simplified I/O for single-door deployments. Q: Can it control mag locks and electric strikes?A: Yes. It supports relay-controlled electric strikes and magnetic locks.

Read more less

The UniFi Access Door Hub (UA-Hub-Door) is a professional access controller designed to manage electric locks, strikes, sensors, and access readers for a single door. Built for the Ubiquiti UniFi Access ecosystem, it delivers reliable PoE-powered door control with no ongoing licence fees. Purpose-Built Door Access Control The UA-Hub-Door is the core controller for UniFi Access door deployments. It securely manages door locks, request-to-exit devices, door position sensors, and UniFi Access readers — making it ideal for offices, apartments, schools, healthcare facilities, and commercial buildings. All configuration, permissions, and access logs are centrally managed via the UniFi Access application. Simple PoE Installation Powered by 802.3af Power over Ethernet (PoE), the Door Hub requires only a single Ethernet cable for both power and connectivity. This reduces installation complexity while ensuring reliable 24/7 operation in professional environments. Flexible Authentication & Secure Control When paired with UniFi Access Readers, the UA-Hub-Door supports: NFC cards & key fobs Mobile BLE access PIN code entry Remote unlock via UniFi Access Lost credentials can be instantly revoked without changing locks or wiring. Ideal Applications Commercial office doors Apartment & strata entry points Education & healthcare facilities Secure internal zones Retail & back-of-house access Key Features & Benefits Dedicated UniFi Access door controller Controls electric strikes, mag locks & door hardware PoE powered (single-cable installation) Relay outputs for lock control Inputs for door sensor & REX button Supports UniFi Access Readers Centralised management via UniFi Access No licence or subscription fees NDAA compliant – enterprise ready What’s in the Box UniFi Access Door Hub (UA-Hub-Door) Wall-mount bracket Mounting hardware Quick-start installation guide Note: Door lock hardware, access readers, and credentials sold separately. Technical Specifications Specification Details Model UA-Hub-Door Solution Type Door access controller Power PoE (802.3af) Relay Outputs Door lock relay Inputs Door sensor, request-to-exit (REX) Reader Support UniFi Access Readers Authentication NFC, BLE mobile access, PIN Management UniFi Access app & web console Use Case Single-door access control Compliance NDAA compliant FAQs Q: What is the UA-Hub-Door used for?A: It controls a single access-controlled door using UniFi Access readers, locks, and sensors. Q: Does it require a subscription?A: No. UniFi Access is licence-free with no ongoing fees. Q: What types of locks are supported?A: Electric strikes, magnetic locks, and compatible relay-controlled door hardware. Q: Can I add more readers later?A: Yes. UniFi Access systems are fully scalable. More Information UA-Hub-Door Installation Guide

Read more less

The UniFi Access Gate Hub (UA-Hub-Gate) is a dedicated controller designed specifically for vehicle and pedestrian gate automation. Built for the Ubiquiti UniFi Access ecosystem, it delivers reliable PoE-powered gate control with support for access readers, sensors, relays, and modern authentication methods — with no ongoing licence fees. Purpose-Built Gate Control for UniFi Access The UA-Hub-Gate is engineered for controlling sliding gates, swing gates, boom gates, and perimeter entry points. Unlike standard door hubs, this model is optimised for gate motors and external access scenarios, offering robust relay control, sensor inputs, and seamless integration with UniFi Access Readers. Administrators can manage users, schedules, and access events centrally via the UniFi Access application. Simple PoE Installation & Reliable Control Powered via 802.3af Power over Ethernet (PoE), the Gate Hub requires only a single Ethernet cable for power and connectivity. Multiple relay outputs allow direct control of gate motors or external relays, while sensor inputs support request-to-exit buttons, safety loops, and position sensors. Flexible Authentication & Remote Management When paired with UniFi Access Readers (such as G3 Reader Pro or G2 Pro), the UA-Hub-Gate supports: NFC cards & key fobs Mobile BLE access PIN code entry Remote unlock via UniFi Access app Lost credentials can be revoked instantly, ensuring secure perimeter control at all times. Ideal Applications Commercial & industrial gates Apartment & strata vehicle entry Gated communities Warehouses & logistics yards Schools & campuses What’s in the Box UniFi Access Gate Hub (UA-Hub-Gate) Wall-mount bracket Mounting hardware Quick-start installation guideNote: Gate motor, access readers, and credentials sold separately. Technical Specifications Specification Details Model UA-Hub-Gate Solution Type Gate access controller Power PoE (802.3af) Relay Outputs Gate motor & auxiliary relays Inputs Door/gate sensors, REX, safety inputs Reader Support UniFi Access Readers Authentication NFC, BLE mobile access, PIN Management UniFi Access app & web console Use Case Vehicle & pedestrian gate control Compliance NDAA compliant More Information UA-Hub-Gate Installation Guide

Read more less

The UA-G3-SK-Gate is a complete UniFi Access gate control starter kit designed for secure pedestrian or vehicle gate entry. Featuring the G3 Reader Pro with camera & intercom, UniFi Access Hub, and NFC credentials, this kit delivers modern, licence-free gate access using mobile unlock, NFC cards, and PIN codes. Professional Gate Access Control – All in One Kit The UniFi Access G3 Gate Starter Kit (UA-G3-SK-Gate) provides everything required to deploy a modern, professional gate access system using the UniFi Access ecosystem. Designed for sliding gates, swing gates, boom gates, and controlled entry points, this kit combines secure authentication, real-time monitoring, and centralised management without ongoing licence fees. G3 Reader Pro with Camera & Intercom At the core of this kit is the G3 Reader Pro, a premium access reader featuring: Integrated camera for visual verification Two-way audio intercom Touchscreen interface Multi-factor authentication support This allows staff or residents to see, speak to, and grant access to visitors directly from the UniFi Access app or console. UniFi Access Hub – Reliable Gate Control The included UniFi Access Hub manages the gate motor relay, request-to-exit devices, sensors, and readers. Powered via PoE, it simplifies installation while delivering reliable control for commercial and residential gate environments. Flexible & Secure Authentication The UA-G3-SK-Gate supports multiple secure entry methods: NFC access cards Mobile unlock (BLE) PIN code entry Remote unlock via UniFi Access Lost credentials can be revoked instantly, ensuring ongoing security without changing locks or wiring. Ideal Applications Commercial & industrial sites Apartment & strata complexes Gated communities Warehouses & logistics facilities Schools & campuses Key Features & Benefits Complete UniFi Access G3 gate starter kit G3 Reader Pro with camera & intercom UniFi Access Hub with PoE power NFC cards, mobile BLE & PIN authentication Remote unlock & live monitoring No licence or subscription fees Scalable – add more readers or credentials NDAA compliant – enterprise ready What’s Included 1 × UniFi Access Hub 1 × UniFi Access G3 Reader Pro UniFi Access NFC Cards (starter quantity) Mounting hardware & accessories Quick-start installation guideNote: Gate motor, electric strike/relay wiring and network switch sold separately. Technical Specifications Component Specification Kit SKU UA-G3-SK-Gate Access Reader UniFi Access G3 Reader Pro Reader Features Camera, intercom, touchscreen Control Hub UniFi Access Hub Authentication NFC, BLE mobile access, PIN Power PoE (802.3af) Management UniFi Access app & web console Use Case Gate access / perimeter control Compliance NDAA compliant FAQs Q: What is UA-G3-SK-Gate?A: It is a complete UniFi Access G3 starter kit for controlling gates using NFC, mobile access, and PIN authentication. Q: Does this kit require a subscription?A: No. UniFi Access is licence-free with no ongoing fees. Q: Can this control vehicle gates?A: Yes. It can control sliding, swing, and boom gates via relay output. Q: Can I add more readers later?A: Yes. UniFi Access is fully scalable with additional readers and credentials. More Information UniFi Access G3 Gate Starter Kit Installation Guide

Read more less

Enterprise-Grade Door Access Control The G3 Reader Pro is a flagship access reader in the Ubiquiti UniFi Access ecosystem, combining secure authentication, real-time video verification, and intuitive user interaction in a single sleek device. It is ideal for offices, commercial buildings, apartments, education facilities, and controlled-entry environments requiring reliable, scalable access control. Built-In Camera & Video Intercom Equipped with an integrated camera and speaker/microphone, the G3 Reader Pro enables visual verification and intercom communication at the door. Administrators and staff can identify visitors before granting access, improving both security and convenience. Multiple Secure Authentication Methods The G3 Reader Pro supports a wide range of modern access methods: NFC cards & key fobs Mobile access via UniFi Identity Bluetooth (BLE) proximity unlock PIN code entry via touchscreen This flexibility allows organisations to deploy multi-factor authentication or tailor access methods per user or door. Simple PoE Installation & Centralised Management Powered via 802.3af PoE, the reader connects directly to a UniFi Access Hub using a single Ethernet cable for power and data. All users, schedules, access logs, and permissions are managed centrally through the UniFi Access application — with no subscriptions required. Designed for Professional Environments With a robust enclosure, vandal-resistant design, and weather-resistant rating for sheltered outdoor use, the G3 Reader Pro is built for real-world deployments where reliability and durability matter. Key Features & Benefits Premium UniFi Access door reader with built-in camera Video intercom with speaker & microphone NFC, BLE, mobile pass & PIN authentication Touchscreen interface for modern user experience PoE powered (single-cable installation) Centralised management via UniFi Access No licence or subscription fees Scalable for single-door or enterprise deployments NDAA compliant for government & enterprise use What’s in the Box UniFi Access G3 Reader Pro Wall mounting bracket Mounting screws & anchors Quick-start installation guideNote: Requires UniFi Access Hub and compatible electric lock/strike (sold separately). Technical Specifications Specification Details Model UniFi Access G3 Reader Pro Authentication Methods NFC, BLE, Mobile Access, PIN Code Camera Integrated door-facing camera Intercom Built-in speaker & microphone Power 802.3af PoE (via UniFi Access Hub) Interface Touchscreen display Mounting Wall mount (optional angle & junction box) Weather Rating Indoor & sheltered outdoor use Compliance NDAA, UL 294

Read more less

The Hikvision DS‑K2704X is a robust 4-door access controller from the Ultra Series, engineered for enterprise environments. It provides built-in web configuration and can expand via RS‑485 modules to manage up to 128 doors, making it ideal for large-scale applications such as airports, banks, and campuses. Designed for reliability, it features redundant RS‑485 architecture, support for multi-door interlocking, anti-passback, and comprehensive I/O interfaces for system flexibility and stability. Key Features Controls 4 doors natively, expandable to 128 doors via 62 DS‑K2M002X modules  Redundant RS‑485 bus with 5 downstream interfaces for communication stability  Fully web-configurable — no additional software required  Features multi-door interlocking, anti-passback, and multi-factor authentication  Status LEDs for power, network, RS‑485, and door status indicators  Large user and event capacity: Up to 100,000 users, 200,000 cards, 10,000 fingerprints, and 600,000 events  Rich interface options: 4 lock controls 4 exit buttons 4 door contact inputs 8 alarm inputs 4 alarm outputs 1 tamper input 1 firealarm interface 4 Wiegand inputs (26/34-bit) USB 2.0 port  Power: 100–240 VAC, consumption ≤ 102 W  Weather-resistant housing with wall-mounting support Supports backup battery charging/discharging for power resilience Technical Specifications Specification Details Model DS‑K2704X Native Door Control 4 Doors Extended Door Capacity Up to 128 doors via 62 modules Communication Redundant RS‑485 bus (5 downlink channels) Configuration Web browser (no software needed) Key I/O Interfaces 4 Lock relays, 4 Exit buttons, 4 Door inputs, 8 Alarm inputs, 4 Alarm outputs, Tamper, Fire, USB 2.0, 4 Wiegand User Capacity 100,000 Users, 200,000 Cards, 10,000 Fingerprints, 600,000 Events Features Anti-passback, Multi-door interlocking, Battery backup, Status LEDs Power Supply 100–240 VAC, ≤ 102 W Mounting Wall-mounted Operating Conditions -10 °C to 55 °C, 0–90% RH More Information Hikvision DS-K2704X Datasheet Hikvision Quick Start Guide Hikvision User Manual

Read more less

The Hikvision DS‑K1T341CMW from the Value Series is a smart face recognition access terminal designed for reliable and efficient entry control. Equipped with a 4.3‑inch capacitive touch screen and 2 MP wide-angle dual-lens camera, it delivers lightning-fast recognition in under 0.2 seconds per user. Powered by deep learning algorithms, this terminal supports up to 3,000 face profiles, 3,000 M1 cards, and records up to 150,000 access events. It offers multi-factor authentication (face, card) and even mask-wearing detection, making it ideal for modern, secure environments. Integrate with existing systems using Wiegand, RS‑485, and Wi-Fi connections. For enhanced safety, it supports two‑way audio with client software or door station integration. With IP65-rated durability, it’s built for daily use in demanding access control scenarios. Key Features Recognition Speed: < 0.2 s per user Screen: 4.3″ capacitive touch display Camera: 2 MP dual-lens, 720p video, 87° diagonal FOV Capacity: 3,000 faces, 3,000 M1 card slots, 150K events Authentication: Face, card (M1), mask detection Connectivity: PoE, Wi‑Fi (2.4 GHz), RJ-45; Wiegand, RS‑485, USB, inputs for lock, exit button, door, tamper Audio: Noise suppression, echo cancellation, two-way audio Security: Built-in access controller, IP65 weather rating Environment: Operating temp –30 °C to 60 °C, power 12–24 VDC @ ≤ 10 W Advanced Features: Hik‑Connect integration, QR code recognition, face anti‑spoofing Technical Specifications Specification Details Display 4.3″ Capacitive Touch Screen Camera 2 MP Dual-Lens, 720p, 87° FOV Face Capacity 3,000 Faces Card Capacity 3,000 M1 Cards Event Log 150,000 Records Recognition Time Less than 0.2 seconds per person Mask Detection Supported Authentication Face, M1 Card Audio Two-Way Audio with Noise Suppression Connectivity Wi-Fi, PoE, RS-485, Wiegand, USB, RJ-45 Power Supply 12–24 VDC, Max. 10W Operating Temperature -30°C to 60°C Ingress Protection IP65 Rated Installation Wall-Mounted More Information Hikvision DS-K1T341CMW DatasheetHikvision Quick Start GuideHikvision User Manual

Read more less

Ubiquiti UniFi Access Reader G2 Professional, 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock This is a 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock. Empower employees with a wide variety of unlock options suitable for any weather conditions. Features: Unlock using an NFC card or UniFi Identity mobile app Doorbell to unlock, triggering the intercom with a video of a visitor Video works at ADA-compliant mounting height PIN unlocking on the screen Connects to UniFi Access Hub using PoE IP55 rain resistance (-10 to 40° C) Technical Specifications Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Weight 136 g (4.8 oz) Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) GbE RJ45 port Connectivity BLE 4.2NFC Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensor Proximity sensor Camera 4000 x 3000, 12 MP, 30 FPS View angle H: 96.67°, V: 123.15°, D: 153.11° Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/WFlash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire Operating environment Outdoor use Ambient operating temperature Device: -30 to 45° C (-22 to 113° F)Display:* -10 to 45° C (14 to 113° F)*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2-Pro/UA-G2-Pro-Black, V02 LED System Steady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and later Downloads Installation Guide

Read more less

Hikvision Door Controller, 4 Door, TCP/IP (2604), Pro Series Access Controller, HIK-AXS-K2604-G 100,000 cards and 300,000 events storage Communication via TCP/TP, ISUP5.0 and RS-485 ISAPI, OSDP supported 4 doors access control Alarm input/output and alarm event upload RS-485 interface and Wiegand interface for accessing card reader UL294 Standard Qualified Supports battery access DownloadDatasheet

Read more less

Hikvision Intercom, Gen 2, Keypad Module (KD-KP), KD8 Series Pro Modular Door Station, HIK-DS-KD-KP Keypad module of modular door station Supporting input pin code to open door, call indoor station IP65 and IK07 higher protection level Backlight compensation behind the keypad buttons Easy to use and extend Datasheet

Read more less

Hikvision Intercom, Gen 2, Mifare 1 Card Reader Module, 13.56MHz (KD-M), KD8 Series Pro Modular Door Station, DS-KD-M The Hikvision Gen 2 Mifare 1 Card Reader Module (DS-KD-M) is designed for seamless integration with the KD8 Series Pro Modular Door Station. Operating at 13.56MHz, it supports secure door unlocking through card swipes and card issuing. Built with an IP65 protection rating, this module ensures reliable performance in diverse environments. Its backlight compensation enhances usability in low-light conditions, while modular design allows easy installation and future expansion. Ideal for professional access control systems, it combines security and flexibility in one compact unit. Features M1 card reader module of modular door station Support unlock door via swiping card, issuing cards IP65 protection level Backlight compensation behind the module Easy to use and extend Download Datasheet

Read more less

Hikvision Mifare-1 Pin/card Reader, Weigand/RS485 Vandal Resistant (1104), HIK-AXS-K1104MK Hikvision Pro 1104 Series Metal Vandal-Proof Card Reader Mifare 1 Card Reader PcZinc-Alloy Material Shell Built-In Audible Beeper Rs-485 And Wiegand Interface IK10, IP65 Model - DS-K1104mk

Read more less

This compact access control reader delivers seamless entry management through NFC and Bluetooth proximity detection. Engineered for flexible deployment, it functions reliably in indoor environments and covered outdoor installations. The integrated security element chip ensures encrypted credential handling, while Power over Ethernet simplifies installation by eliminating separate power requirements. Ideal for modern access systems requiring touchless authentication without compromising security protocols. Features (1) PoE input powered by an Access Hub Security chip that supports advanced NFC encryption Mobile unlocking with the Access or UI mobile apps Downloads DatasheetInstallation Guide

Read more less

Hikvision Door Controller, Single Door, TCP/IP (2601), Pro Series Access Controller, HIK-AXS-K2601-G 100,000 cards and 300,000 events storage Communication via TCP/TP, ISUP5.0 and RS-485 ISAPI, OSDP supported 1 door access control Alarm input/output and alarm event upload RS-485 interface and Wiegand interface for accessing card reader UL294 Standard Qualified Supports battery access DownloadDatasheet

Read more less

Hikvision Door Controller, 2 Door, TCP/IP (2602), Pro Series Access Controller, HIK-AXS-K2602-G 100,000 cards and 300,000 events storage Communication via TCP/TP, ISUP5.0 and RS-485 ISAPI, OSDP supported 2 doors access control Alarm input/output and alarm event upload RS-485 interface and Wiegand interface for accessing card reader UL294 Standard Qualified Supports battery access DownloadDatasheet

Read more less

Dahua Card Enrolment Reader / Card Issuer Power supply by USB port Support IC card ( Mifare card) with frequency 13.56MHz Downloads Datasheet

Read more less