TP-Link TL-WR902AC – AC750 Dual Band Wireless Travel Router The TP-Link TL-WR902AC is a pocket-sized AC750 dual-band travel router that fits in the palm of your hand and powers from any USB source — a wall adapter, power bank, or laptop port. Whether you’re setting up a temporary Wi-Fi network in a hotel room, sharing a 3G/4G USB modem connection on site, or extending an existing wireless network, the TL-WR902AC handles it all with a single hardware mode switch. A practical tool for travellers, field technicians, and remote installers alike. Key Features AC750 Dual Band Wi-Fi: 433Mbps on 5GHz (802.11ac) and 300Mbps on 2.4GHz (802.11b/g/n) for fast, flexible wireless connectivity. 5 Operation Modes in One Device: Router, Access Point (AP), Range Extender, Client, and WISP — switchable via a physical hardware switch, no web interface required for mode changes. 3G/4G USB Modem Support: The USB 2.0 port accepts compatible 3G/4G USB modems for shared mobile broadband on site or while travelling. USB File Sharing: Connect a USB storage drive to share files across the local network. Flexible USB Power: Powered via Micro USB (5V/2A) — compatible with power banks, laptop USB ports, and standard wall adapters for truly portable deployment. Pocket-Sized Form Factor: 74 × 67 × 22mm and just 0.26kg — small enough to carry in a shirt pocket or tool bag. WPS Button: One-press WPS pairing for quick, secure wireless client connections. Wireless Security: WPA/WPA2, WPA-PSK/WPA2-PSK, and 64/128-bit WEP encryption supported. Operation Modes Explained Router Mode: Connects to a modem or Ethernet source and shares the connection wirelessly to multiple devices. Access Point (AP) Mode: Converts a wired Ethernet connection into a Wi-Fi network. Range Extender Mode: Boosts and rebroadcasts an existing Wi-Fi signal to extend coverage. Client Mode: Connects to an existing Wi-Fi network and provides a wired Ethernet output for devices without Wi-Fi. WISP Mode: Connects to a wireless ISP hotspot and shares the connection as a private Wi-Fi network with NAT and firewall protection. Ideal Use Cases Creating a private Wi-Fi network in hotel rooms, serviced apartments, or short-stay accommodation. Sharing a 3G/4G USB modem connection across multiple devices on a job site or remote location. Field technicians and security installers needing a portable AP or client device for on-site network testing and commissioning. Extending Wi-Fi coverage in small offices, temporary workspaces, or exhibition stands. Providing wired-to-wireless bridging for devices without built-in Wi-Fi in client mode. Technical Specifications Specification Detail Model TL-WR902AC Wi-Fi Standard IEEE 802.11ac/n/a (5GHz), IEEE 802.11b/g/n (2.4GHz) Wireless Speed (5GHz) Up to 433Mbps (802.11ac) / Up to 150Mbps (802.11n) Wireless Speed (2.4GHz) Up to 300Mbps (802.11n) Combined Speed AC750 (433 + 300Mbps) Ethernet Port 1 × 10/100Mbps WAN/LAN (shared) USB Port 1 × USB 2.0 (3G/4G modem or storage) Operation Modes Router / AP / Range Extender / Client / WISP Antenna On-board (internal) Power Supply Micro USB 5V/2A (power bank / adapter / laptop USB) Transmit Power <20dBm (2.4GHz) / <23dBm (5GHz) Wireless Security WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128-bit WEP Buttons WPS, Reset, Mode Switch Dimensions 74 × 67 × 22 mm Weight 0.26kg SKU TL-WR902AC Barcode (EAN) 6935364095666 What’s in the Box 1 × TL-WR902AC AC750 Travel Router 1 × Micro USB Power Cable 1 × RJ45 Ethernet Cable Quick Installation Guide Frequently Asked Questions Can I power the TL-WR902AC from a power bank? Yes. The Micro USB power input (5V/2A) is compatible with most USB power banks, making it ideal for truly portable deployments where no mains power is available. Which 3G/4G USB modems are compatible? The TL-WR902AC supports a wide range of 3G/4G USB modems. Refer to TP-Link’s official compatibility list on their support page for a full list of tested and supported modem models. How do I switch between operation modes? The TL-WR902AC has a physical hardware switch on the device body for selecting between Router, AP/Client, and Repeater/WISP modes. Fine-tuning within each mode is done via the web management interface. Does it support both 2.4GHz and 5GHz simultaneously? Yes. The TL-WR902AC broadcasts on both 2.4GHz (up to 300Mbps) and 5GHz (up to 433Mbps) simultaneously, allowing devices to connect to whichever band suits them best. Is it suitable for use as a temporary access point on a security installation job site? Yes. In AP mode, the TL-WR902AC converts any Ethernet connection into a Wi-Fi network — useful for commissioning IP cameras, NVRs, and access control systems on site without needing a full router setup. Can I use it to extend my existing home Wi-Fi network? Yes. In Range Extender mode, the TL-WR902AC connects to your existing Wi-Fi network and rebroadcasts the signal to extend coverage to areas with weak reception. Does it include a wall adapter? The TL-WR902AC is powered via Micro USB. A USB power cable is included; a compatible 5V/2A USB wall adapter or power bank is required if not powering from a laptop or computer USB port.

Read more less

TP-Link TL-WR802N N300 Nano Travel Router Big Wi-Fi performance in a pocket-sized package. The TP-Link TL-WR802N is a compact N300 wireless router measuring just 57 × 57 × 18mm — small enough to slip into a shirt pocket, yet capable enough to run five different wireless modes. Whether you’re sharing a hotel Ethernet port, extending a weak signal, or setting up a temporary hotspot, the TL-WR802N handles it all. USB-powered for maximum flexibility, it’s the ideal travel companion for frequent flyers, remote workers, and anyone who needs reliable Wi-Fi on the go. Key Features 300Mbps wireless N speed on 2.4GHz — suitable for streaming, video calls, and everyday browsing 5 operating modes: Router, Repeater, Client, Access Point (AP), and WISP Router Pocket-sized design: 57 × 57 × 18mm — fits in a pocket or laptop bag Powered via Micro USB — use a power adapter, power bank, or USB port on a laptop 1 × 10/100Mbps LAN/WAN port — switchable for flexible connection options On-board antenna — no protruding parts, ultra-compact form factor WMM and Bandwidth Control for basic QoS VPN pass-through: PPTP, L2TP, IPSec Wireless security: WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128/152-bit WEP DHCP server, port forwarding, Dynamic DNS, and access control included Quick setup — ready in minutes via the web interface Use Cases Sharing a hotel or Airbnb wired Ethernet connection as Wi-Fi for multiple devices Extending an existing weak Wi-Fi signal in Repeater mode Creating a private, secure Wi-Fi network in public spaces Connecting a wired-only device (e.g. smart TV, games console) to Wi-Fi in Client mode Setting up a temporary wireless access point at events, pop-up retail, or job sites Specifications Specification Detail Model TL-WR802N Wi-Fi Standard IEEE 802.11b/g/n 2.4GHz Wi-Fi Speed Up to 300Mbps (11n), 54Mbps (11g), 11Mbps (11b) Frequency 2.4 – 2.4835GHz Operating Modes Router, Repeater, Client, AP, WISP Router LAN/WAN Port 1 × 10/100Mbps (switchable) Power Micro USB (adapter, power bank, or PC USB port) Antenna On-board (internal) Transmit Power CE: <20dBm (2.4GHz) / FCC: <30dBm WAN Types Dynamic IP, Static IP, PPPoE, PPTP, L2TP VPN Pass-Through PPTP, L2TP, IPSec (ESP) Wireless Security WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128/152-bit WEP Dimensions (W × D × H) 57 × 57 × 18 mm Weight 220 g SKU TL-WR802N Vendor TP-Link Recommended Accessories USB power bank — for fully cable-free, portable operation anywhere Micro USB cable — replacement or spare for powering the router on the go Cat6 Ethernet patch cable — for connecting to hotel or office wired ports in Router mode Frequently Asked Questions What are the five operating modes and when do I use each? Router mode: Connect an Ethernet cable from a modem or wall port and share it as Wi-Fi. Repeater mode: Extend an existing Wi-Fi signal to improve coverage. Client mode: Connect a wired device (e.g. smart TV) to an existing Wi-Fi network. AP mode: Turn a wired network into a wireless one. WISP Router mode: Connect to a public hotspot and share it securely with your own devices. Can I power the TL-WR802N from a power bank? Yes. The TL-WR802N is powered via Micro USB and works with any standard USB power bank, making it fully portable without needing a wall outlet. Does the TL-WR802N work in Australian hotels? Yes. In Router mode, simply plug an Ethernet cable from the hotel’s wall port into the TL-WR802N and it will share the connection as a private Wi-Fi network for all your devices. No per-device login required once the router is connected. Is the TL-WR802N dual-band? No. The TL-WR802N operates on the 2.4GHz band only. It does not support 5GHz. For dual-band travel routing, consider the TP-Link TL-WR902AC or similar AC-class travel router. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

Affordable Wi-Fi 6 for Faster, More Reliable Home Internet The TP-Link Archer AX1500 brings Wi-Fi 6 (802.11ax) technology to Australian homes at an accessible price point. With combined speeds of up to 1.5Gbps across dual bands, a 1.5GHz tri-core processor, and OFDMA technology for handling more devices simultaneously, it's a significant upgrade over older Wi-Fi 5 routers — delivering faster speeds, lower latency, and better performance in homes with multiple connected devices. Compatible with all NBN connection types and all existing Wi-Fi devices. Key Features AX1500 Wi-Fi 6 Speeds: 1201Mbps on 5GHz and 300Mbps on 2.4GHz — faster and more efficient than Wi-Fi 5 for everyday streaming, browsing, and gaming. 1.5GHz Tri-Core Processor: Dedicated triple-core CPU ensures smooth, buffer-free communication between the router and all connected devices simultaneously. OFDMA Technology: Communicates with multiple Wi-Fi 6 devices at the same time, reducing congestion and improving performance in homes with many connected devices. MU-MIMO: Serves multiple devices simultaneously rather than sequentially, improving overall network efficiency under load. 4× Fixed High-Gain Antennas with Beamforming: Focuses Wi-Fi signal towards connected devices to extend range and improve reliability throughout 3-bedroom homes. Target Wake Time (TWT): Reduces battery drain on connected Wi-Fi 6 devices such as smartphones, laptops, and smart home sensors. 4× Gigabit LAN Ports: Wired connections for smart TVs, gaming consoles, NVRs, and desktop PCs at full Gigabit speeds. Backwards Compatible: Works with all existing Wi-Fi devices (802.11a/b/g/n/ac) — no need to replace any current devices. Easy Setup via Tether App: Get connected in minutes using the free TP-Link Tether app on iOS or Android — no technical knowledge required. Router & Access Point Modes: Flexible deployment as a standalone router or as a wireless access point behind an existing router or modem. Common Use Cases Upgrading from an older Wi-Fi 5 or Wi-Fi 4 router for faster home internet NBN connections (FTTP, FTTC, FTTN, FTTB, HFC) requiring a standalone router Homes with 10–20 connected devices including smartphones, tablets, smart TVs, and IoT devices 4K streaming and video conferencing with reduced buffering and lag Rental properties and small apartments needing reliable, easy-to-setup Wi-Fi Access point mode for extending an existing wired network with wireless coverage Technical Specifications Model Archer AX1500 Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a/b/g) Wi-Fi Speed AX1500: 5GHz 1201Mbps + 2.4GHz 300Mbps 5GHz Band 1201Mbps (802.11ax) 2.4GHz Band 300Mbps (802.11n) Processor 1.5GHz Triple-Core CPU Antennas 4× fixed high-performance external antennas Streams 4 (2+2) WAN Port 1× Gigabit LAN Ports 4× Gigabit Working Modes Router Mode, Access Point Mode Key Technologies OFDMA, MU-MIMO, Beamforming, TWT, Airtime Fairness Security WPA3, WPA2 App Management TP-Link Tether (iOS & Android) Coverage Up to 3-bedroom homes Backwards Compatibility 802.11a/b/g/n/ac (Wi-Fi 1–5) Power Supply 12V DC / 1.5A (external adapter) Frequently Asked Questions What is the difference between the Archer AX1500 and the Archer AX55? Both are Wi-Fi 6 routers, but the Archer AX55 offers higher speeds (AX3000 vs AX1500), a faster Intel chipset, HE160 channel support on 5GHz, a USB 3.0 port, DFS support, and TP-Link HomeShield security. The AX1500 is the more affordable entry-level option — ideal for smaller homes or users upgrading from older routers on a budget. Choose the AX55 if you need maximum performance; choose the AX1500 for everyday home use at a lower price. Is it compatible with the NBN? Yes. The Archer AX1500 is compatible with all NBN connection types including FTTP, FTTC, FTTN, FTTB, and HFC. For FTTP and HFC connections, connect the router directly to the NBN connection box. For FTTN and FTTB connections, you will need a separate VDSL modem or a modem router upstream. Does it support Wi-Fi 5 and older devices? Yes. The Archer AX1500 is fully backwards compatible with Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n), and all older Wi-Fi standards. All your existing devices will connect and work normally — Wi-Fi 6 devices will benefit from improved speeds and efficiency. How do I set it up? Download the free TP-Link Tether app on iOS or Android, connect to the router's default Wi-Fi network, and follow the in-app setup wizard. Most users are connected in under 5 minutes. You can also set it up via a web browser at tplinkwifi.net. Does it support parental controls? Yes. Basic parental controls are available through the TP-Link Tether app, allowing you to block specific websites, set time limits, and pause internet access for individual devices. Can I use it as a wireless access point? Yes. The Archer AX1500 supports Access Point mode, allowing you to connect it to an existing router or modem via Ethernet and use it purely as a wireless access point to add Wi-Fi 6 coverage to your network.

Read more less

Extend Your Wi-Fi 6 Coverage to Every Corner of Your HomeThe TP-Link RE605X is an AX1800 Wi-Fi 6 range extender that boosts your existing wireless network to eliminate dead zones and weak signal areas. With combined speeds of up to 1800Mbps across dual bands, a built-in Gigabit Ethernet port, and support for MU-MIMO and OFDMA, it delivers faster, more reliable Wi-Fi to more devices — even in busy households. Compatible with any Wi-Fi router or access point.Key Features Wi-Fi 6 (802.11ax) — next-generation wireless technology for faster speeds and better performance in congested environments AX1800 Dual-Band Speeds — 574Mbps on 2.4GHz and 1201Mbps on 5GHz for a combined 1800Mbps 1× Gigabit Ethernet Port — connect a wired device such as a smart TV, gaming console, or NVR directly to the extender MU-MIMO and OFDMA — simultaneously serves multiple devices with less congestion and lower latency 2× External Antennas — improved signal strength and coverage compared to internal antenna designs Works with Any Router — compatible with all Wi-Fi routers and access points regardless of brand WPS One-Touch Setup — connect to your existing network in seconds with a single button press Access Point Mode — use as a standalone access point when connected via Ethernet for wired-to-wireless coverage Typical Use Cases Eliminating Wi-Fi dead zones in bedrooms, garages, or back gardens Extending Wi-Fi coverage in multi-storey homes where the router signal doesn’t reach Adding a wired Ethernet connection in a room without a wall socket via the Gigabit port Boosting Wi-Fi for smart home devices, IP cameras, or streaming devices in weak signal areas Temporary Wi-Fi extension for renovations, events, or pop-up setups Technical Specifications Specification Detail Model RE605X Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a — 5GHz; 802.11ax/n/b/g — 2.4GHz) Wi-Fi Speed AX1800: 574Mbps (2.4GHz) + 1201Mbps (5GHz) Antennas 2× External (2×2 MU-MIMO) Ethernet Port 1× Gigabit (10/100/1000Mbps) Operating Modes Range Extender, Access Point Security WPA/WPA2/WPA3, WPA2-Enterprise Buttons WPS, Reset Power Consumption 10W Dimensions (W×D×H) 73.7 × 45.7 × 124.5 mm Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the RE605X work with my existing router? Yes. The RE605X is compatible with any Wi-Fi router or access point regardless of brand. It connects to your existing network wirelessly and rebroadcasts the signal with the same or a new network name. Do I need a Wi-Fi 6 router to use the RE605X? No. The RE605X works with any Wi-Fi router, including older Wi-Fi 5 (AC) and Wi-Fi 4 (N) routers. However, to take full advantage of Wi-Fi 6 speeds and features, a Wi-Fi 6 router is recommended. Can I use the RE605X as an access point? Yes. When connected to a router or switch via the Gigabit Ethernet port, the RE605X can operate in Access Point mode, providing wireless coverage from a wired connection. Where is the best place to position the RE605X? For best results, place the RE605X halfway between your router and the area with weak signal — ideally where it can still receive a strong signal from the router (at least 2–3 bars). Avoid placing it behind large appliances or thick concrete walls. Does the RE605X support WPA3 security? Yes. The RE605X supports WPA3 encryption, providing the latest wireless security standard for compatible devices.

Read more less

TP-Link RE450 – AC1750 Wi-Fi Range Extender with Gigabit Port The TP-Link RE450 eliminates Wi-Fi dead zones by connecting to your existing router wirelessly and rebroadcasting a stronger signal to areas it can’t reach on its own. With AC1750 dual band speeds (450Mbps on 2.4GHz + 1300Mbps on 5GHz), three adjustable external antennas, and a Gigabit Ethernet port for wired device bridging, it’s a capable range extender for homes, offices, and small commercial premises across Australia. Works with any Wi-Fi router or wireless access point. Key Features AC1750 Dual Band Wi-Fi: 450Mbps on 2.4GHz and 1300Mbps on 5GHz for a combined 1750Mbps — three times faster than standard 802.11n extenders. 3 Adjustable External Antennas: Directional antenna positioning allows you to optimise coverage for your specific layout, reducing interference and improving signal reliability. Gigabit Ethernet Port: Converts the extender into a wireless bridge — connect a smart TV, gaming console, NVR, Blu-ray player, or desktop PC to your Wi-Fi network via a wired Gigabit connection. Intelligent Signal Light: LED indicator shows signal strength from the host router to help you find the optimal placement location for maximum coverage. Works with Any Router: Compatible with any 802.11a/b/g/n/ac Wi-Fi router or wireless access point regardless of brand. Australian Plug Type: Supplied with AU-standard plug for direct compatibility with Australian power outlets. RE Button: One-press WPS-style pairing with compatible routers for quick setup without accessing the web interface. Dual Band Flexibility: Extend either the 2.4GHz or 5GHz band, or both simultaneously, depending on your network requirements. Ideal Use Cases Extending Wi-Fi coverage to rooms, floors, or areas of a home or office where the router signal is weak or absent. Bridging a wired device (smart TV, NVR, gaming console) to a Wi-Fi network via the Gigabit Ethernet port without running new cable to the router. Improving Wi-Fi coverage in multi-storey homes, large open-plan offices, or buildings with thick walls. Providing reliable wireless connectivity to IP cameras or access control devices in areas with marginal router signal. Temporary Wi-Fi extension for short-term installations or rental properties where infrastructure changes are not possible. Technical Specifications Specification Detail Model RE450 Wi-Fi Standard IEEE 802.11ac/n/g/b Wi-Fi Speed (5GHz) Up to 1300Mbps (802.11ac) Wi-Fi Speed (2.4GHz) Up to 450Mbps (802.11n) Combined Speed AC1750 (1300 + 450Mbps) Antennas 3 × External Adjustable Ethernet Port 1 × 10/100/1000Mbps (Gigabit RJ45) Plug Type AU (Australian standard) Power Consumption 9W (max) Buttons RE (Range Extender), Reset, LED, Power Router Compatibility Works with any 802.11a/b/g/n/ac Wi-Fi router Dimensions 163 × 76.4 × 66.5 mm Weight 0.34kg SKU RE450 Barcode (EAN) 6935364095994 What’s in the Box 1 × RE450 AC1750 Wi-Fi Range Extender 1 × RJ45 Ethernet Cable Quick Installation Guide Frequently Asked Questions Will the RE450 work with my existing router? Yes. The RE450 is compatible with any 802.11a/b/g/n/ac Wi-Fi router or wireless access point, regardless of brand. It connects to your existing network wirelessly and rebroadcasts the signal. How do I find the best location to place the RE450? The built-in intelligent signal LED indicates the signal strength received from your router. Place the RE450 where the LED shows a strong signal — typically halfway between your router and the dead zone — for the best balance of coverage extension and speed. Can I connect a wired device to the RE450? Yes. The Gigabit Ethernet port allows you to connect a wired device — such as a smart TV, NVR, gaming console, or desktop PC — to your Wi-Fi network at Gigabit speeds, effectively turning the RE450 into a wireless bridge. Does the RE450 create a separate Wi-Fi network name (SSID)? By default, the RE450 can extend your existing network using the same SSID, allowing devices to roam between the router and extender seamlessly. It can also be configured with a separate SSID if preferred. Will using a range extender reduce my Wi-Fi speed? Range extenders that use a single radio to receive and retransmit on the same band can reduce throughput by up to 50%. The RE450 uses dual band Wi-Fi, which allows it to communicate with the router on one band while serving clients on the other, reducing this speed penalty for dual-band capable devices. Is the RE450 suitable for extending Wi-Fi to IP cameras? Yes. The RE450 can extend Wi-Fi coverage to areas where IP cameras are installed but router signal is insufficient. For cameras requiring a wired connection, the Gigabit Ethernet port can also be used to bridge a single camera or a small switch to the extended network. Does it plug directly into a wall socket? Yes. The RE450 plugs directly into a standard Australian power outlet (AU plug type included) — no separate power adapter or cable is required for power.

Read more less

Stay Connected Anywhere with 4G LTE Mobile Wi-FiThe TP-Link M7000 is a compact 4G LTE mobile Wi-Fi hotspot that lets you share fast wireless internet with up to 10 devices wherever you go. Simply insert a 4G SIM card from any Australian carrier, and you’re online in seconds — no cables, no fixed connection required. With a built-in 2000mAh rechargeable battery, it’s ideal for travel, remote work, and backup internet on the go.Key Features 4G LTE Connectivity — supports FDD-LTE and TDD-LTE bands for broad Australian carrier compatibility Connect Up to 10 Devices — share your 4G connection with smartphones, tablets, laptops, and more simultaneously 300Mbps Wi-Fi — IEEE 802.11b/g/n on 2.4GHz for reliable wireless performance 2000mAh Rechargeable Battery — up to 8 hours of continuous use on a single charge Nano SIM Compatible — works with any Australian 4G SIM card (Telstra, Optus, Vodafone, and MVNOs) Micro USB Charging — charge via any standard USB power source or power bank Compact and Lightweight — pocket-sized design for easy carry anywhere Typical Use Cases Mobile internet for travel, camping, and remote work across Australia Backup internet connection when your fixed NBN or ADSL service goes down Temporary Wi-Fi for events, pop-up stalls, or job sites Sharing a 4G data plan across multiple devices without a fixed router Internet access for CCTV monitoring systems in locations without fixed broadband Technical Specifications Specification Detail Model M7000 Mobile Network 4G FDD-LTE / TDD-LTE, 3G HSPA+/HSPA/UMTS, 2G EDGE/GPRS/GSM Wi-Fi Standard IEEE 802.11b/g/n (2.4GHz) Wi-Fi Speed Up to 300Mbps Max Connected Devices 10 SIM Card Type Nano SIM (1 slot) Battery 2000mAh rechargeable (up to 8 hours use) Charging Port Micro USB Dimensions (W×D×H) 94 × 56 × 13 mm Operating Temperature 0–40°C Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the M7000 work with Australian SIM cards? Yes. The M7000 is compatible with 4G SIM cards from all major Australian carriers including Telstra, Optus, Vodafone, and their MVNOs. Check your carrier’s supported LTE bands to confirm compatibility with your specific plan. Does the M7000 come with a SIM card? No. The M7000 is a device-only purchase. You will need to supply your own nano SIM card with a data plan from an Australian carrier. How long does the battery last? The 2000mAh battery provides up to 8 hours of continuous use under typical conditions. Battery life may vary depending on signal strength, number of connected devices, and data usage. Can I use the M7000 as a backup internet connection? Yes. It’s a popular choice for NBN failover — simply insert a 4G SIM with a data plan and connect your devices to the M7000’s Wi-Fi network when your fixed connection is unavailable. Can I charge the M7000 while using it? Yes. You can connect the M7000 to a power source via micro USB while it is in use, effectively running it as a fixed 4G router when near a power outlet.

Read more less

TP-Link TL-MR6400 N300 4G LTE Wi-Fi Router Internet anywhere a SIM card works. The TP-Link TL-MR6400 is a 4G LTE router that shares your mobile broadband connection with multiple Wi-Fi devices — no technician, no fixed-line required. Simply insert a Micro SIM, power it on, and you’re online. With support for Australian 4G bands including Band 28 (700MHz), it delivers reliable coverage in regional and suburban areas where fixed broadband may be limited or unavailable. Please note: This product does not include a modem or SIM card. A compatible Micro SIM from your preferred Australian carrier is required. Key Features 4G LTE download speeds up to 150Mbps — share with multiple Wi-Fi devices simultaneously 300Mbps wireless N speed on 2.4GHz (IEEE 802.11b/g/n) Supports 4G Band 28 (700MHz) and Band 5 — strong regional and suburban coverage in Australia Micro SIM card slot — compatible with all major Australian carriers (Telstra, Optus, Vodafone) 3 × 10/100Mbps LAN ports + 1 × 10/100Mbps LAN/WAN port for wired device connections or fixed-line backup 2 internal 4G LTE antennas + 2 fixed external Wi-Fi antennas for stable wireless performance WPS/Reset button, Wireless On/Off button, and Power On/Off button NBN compatible in Wireless Router Mode (FTTP/FTTH) Wireless security: WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128-bit WEP Plug-and-play setup — no configuration required for basic use Use Cases Primary internet connection in areas without fixed-line NBN or ADSL coverage Temporary internet for construction sites, pop-up retail, or events Backup internet connection when fixed-line broadband fails Holiday homes, caravans, or remote properties needing portable Wi-Fi Small offices or retail locations requiring a quick, no-install internet solution Specifications Specification Detail Model TL-MR6400 4G LTE Download Speed Up to 150Mbps 4G LTE Upload Speed Up to 50Mbps 4G Bands Band 5, Band 28 (700MHz) Wi-Fi Standard IEEE 802.11b/g/n 2.4GHz Wi-Fi Speed Up to 300Mbps SIM Card Slot 1 × Micro SIM LAN Ports 3 × 10/100Mbps LAN/WAN Port 1 × 10/100Mbps (switchable) Antennas 2 internal 4G LTE + 2 fixed external Wi-Fi Wireless Security WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128-bit WEP Receive Sensitivity 11g 54M: -74dBm; 11n HT20: -71dBm; 11n HT40: -67dBm Power Supply 9V / 0.85A external adapter Dimensions (W × D × H) 202 × 145 × 34 mm NBN Compatibility FTTP / FTTH (Wireless Router Mode) Weight 640 g SKU TL-MR6400 Vendor TP-Link Recommended Accessories External 4G LTE antenna (SMA connector) — improve signal strength in low-coverage areas Cat6 Ethernet patch cable — for wired connections to desktop PCs, NVRs, or switches TP-Link TL-SG1005D 5-Port Gigabit Switch — expand wired connections from the LAN ports Frequently Asked Questions Does the TL-MR6400 work with Australian carriers? Yes. The TL-MR6400 supports 4G Band 28 (700MHz) and Band 5, which are used by Telstra, Optus, and Vodafone across Australia. Band 28 in particular provides strong regional and rural coverage. Always confirm band compatibility with your specific carrier plan before purchasing. What SIM card size does the TL-MR6400 use? It uses a Micro SIM card. If your carrier provides a Nano SIM, you will need a Nano-to-Micro SIM adapter, available from most electronics retailers. Does this router include a SIM card or modem? No. The TL-MR6400 does not include a SIM card or modem. You will need to supply your own Micro SIM from a compatible Australian carrier with an active data plan. Can I use the TL-MR6400 as a backup internet connection? Yes. The LAN/WAN port can be configured as a WAN port, allowing you to connect a fixed-line modem as a primary connection while using 4G as a failover — or vice versa. Is the TL-MR6400 compatible with the NBN? Yes, in Wireless Router Mode for FTTP (Fibre to the Premises) and FTTH (Fibre to the Home) NBN connection types. It is not designed to replace an NBN modem for other connection types such as FTTN or HFC. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link Archer A6 AC1200 Dual-Band Wi-Fi 5 Gigabit Router The TP-Link Archer A6 is an AC1200 dual-band Wi-Fi 5 router delivering reliable wireless connectivity for Australian homes and small offices. With 867Mbps on 5GHz and 300Mbps on 2.4GHz, four high-gain antennas with Beamforming, MU-MIMO for simultaneous multi-device performance, and five Gigabit ports, it provides solid everyday internet performance for households with moderate device counts — at an accessible price point. OneMesh support and Access Point mode add flexibility for expanding or integrating into an existing network. Key Features AC1200 Dual-Band Wi-Fi 5 — 867Mbps on 5GHz for streaming and gaming, plus 300Mbps on 2.4GHz for everyday browsing and IoT devices. MU-MIMO Technology — Simultaneously communicates with multiple MU-MIMO-capable devices, reducing wait times and improving overall network efficiency. 4 × High-Gain External Antennas with Beamforming — Concentrates Wi-Fi signals towards connected devices for stronger, more reliable coverage throughout a 3-bedroom home. 5 Gigabit Ports — 1 × Gigabit WAN + 4 × Gigabit LAN for fast wired connections to PCs, smart TVs, NVRs, and gaming consoles. WPA3 Security — Latest Wi-Fi security standard for stronger, individualised encryption alongside WPA2 and WPA/WPA2-Enterprise (802.1x) support. Guest Network — Separate 5GHz and 2.4GHz guest networks keep visitors off your main network without sharing your Wi-Fi password. OpenVPN Server — Built-in OpenVPN server allows secure remote access to your home network from anywhere. OneMesh Support — Add a compatible TP-Link range extender to create seamless whole-home Wi-Fi with a single network name and automatic roaming. Access Point Mode — Converts a wired Ethernet connection into a wireless network — useful for adding Wi-Fi to a wired-only network or modem. Airtime Fairness — Prevents slower devices from monopolising bandwidth, keeping the network responsive for all connected devices. Tether App Setup — Set up and manage your router in minutes via the TP-Link Tether app (iOS & Android). Use Cases Australian homes on NBN plans up to 100Mbps needing reliable dual-band Wi-Fi for 10–20 devices Small offices and home offices requiring Gigabit wired ports and a separate guest Wi-Fi network Households replacing an ageing Wi-Fi 4 (N) router with a more capable Wi-Fi 5 (AC) upgrade Renters and apartment dwellers needing a compact, easy-to-setup router without professional installation Network installers adding Wi-Fi to a wired-only environment via Access Point mode Technical Specifications Specification Detail Model Archer A6 Wi-Fi Standard Wi-Fi 5 (IEEE 802.11ac/n/a on 5GHz; 802.11n/b/g on 2.4GHz) Combined Speed AC1200 — 867Mbps (5GHz) + 300Mbps (2.4GHz) Antennas 4 × Fixed External High-Gain with Beamforming MU-MIMO Yes Airtime Fairness Yes WAN Port 1 × Gigabit RJ45 LAN Ports 4 × Gigabit RJ45 CPU Dual-Core Operating Modes Router Mode, Access Point Mode Security WPA3 / WPA2 / WPA; WPA/WPA2-Enterprise (802.1x); SPI Firewall; Access Control; IP & MAC Binding Guest Network 1 × 5GHz + 1 × 2.4GHz VPN OpenVPN Server Mesh TP-Link OneMesh compatible App TP-Link Tether (iOS & Android) Power 12V DC, 1A Weight Approx. 720g Warranty 2 Years Recommended Accessories TP-Link RE315 OneMesh Wi-Fi Range Extender — Add a OneMesh-compatible extender to the Archer A6 for seamless whole-home Wi-Fi coverage with a single network name. TP-Link TL-WA3001 AX3000 Wi-Fi 6 Access Point — If you’re ready to upgrade to Wi-Fi 6, connect this AP to one of the Archer A6’s Gigabit LAN ports for Wi-Fi 6 coverage in a specific area. Cat6 Ethernet Cable — For reliable Gigabit wired connections from the router to PCs, smart TVs, NVRs, and other wired devices. Frequently Asked Questions Is the Archer A6 suitable for NBN 250 or NBN 1000 plans? The Archer A6 is best suited to NBN plans up to 100Mbps. Its 5GHz Wi-Fi 5 maximum of 867Mbps is sufficient for NBN 100, but the wireless throughput in real-world conditions may not fully utilise NBN 250 or higher plans. For NBN 250+ plans, consider a Wi-Fi 6 router such as the Archer AX55 Pro for better real-world wireless performance. What is the difference between Router Mode and Access Point Mode? In Router Mode, the Archer A6 connects to your modem or NBN connection box and manages your home network, including DHCP, NAT, and firewall. In Access Point Mode, it connects to an existing router via Ethernet and adds Wi-Fi coverage without creating a separate network — useful for adding wireless to a wired-only environment or extending coverage from a modem-router combo. Does the Archer A6 support Wi-Fi 6 devices? No. The Archer A6 is a Wi-Fi 5 (802.11ac) router. Wi-Fi 6 devices will connect and work normally, but they will operate at Wi-Fi 5 speeds. To take advantage of Wi-Fi 6 speeds and efficiency improvements, a Wi-Fi 6 router such as the Archer AX55 Pro is required. How does OneMesh work with the Archer A6? OneMesh allows you to pair a compatible TP-Link range extender with the Archer A6 to create a unified whole-home Wi-Fi network with a single SSID. Your devices automatically connect to the strongest signal — either the router or the extender — as you move through your home, without manually switching networks. Can I use the Archer A6 as just an access point? Yes. In Access Point Mode, the Archer A6 connects to an existing router or switch via its WAN port and broadcasts Wi-Fi without performing routing or NAT. This is useful for adding Wi-Fi to a wired network, or for using the Archer A6 as a secondary AP in a larger network.

Read more less

Ubiquiti IR Range Extender for UniFi Protect G4 Bullet Camera - UVC-G4-BULLET Long-range IR LED accessory for UniFi Protect G4 Camera. Extends IR Range Up to 25 m (82 ft) Weather Resistent for Outdoor Use Powered and Controlled by the UniFi Video Camera Compatible with UniFi Video Camera G3, model UVC-G3

Read more less

TP-Link Archer AX72 Pro — AX5400 Multi-Gigabit Wi-Fi 6 Router The TP-Link Archer AX72 Pro is a high-performance AX5400 Wi-Fi 6 router built for homes and small offices that demand fast, reliable wireless connectivity across a large number of devices. With a 2.5 Gbps multi-gigabit port, 4T4R HE160 on the 5 GHz band, support for 100+ simultaneous devices, and TP-Link HomeShield security, it delivers the speed, coverage, and control needed for 8K streaming, online gaming, remote work, and smart home environments across Australia. Key Features AX5400 Wi-Fi 6 Speeds: Up to 5400 Mbps combined — 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz — for fast browsing, streaming, and downloading simultaneously. 4T4R + HE160 on 5 GHz: Full 4-stream, 160 MHz channel width configuration on the 5 GHz band enables ultra-fast connections up to 4.8 Gbps for compatible devices. 2.5 Gbps Multi-Gigabit Port: A 2.5 Gbps WAN/LAN port breaks through the 1G bottleneck, making full use of high-speed NBN and fibre connections. Configurable as WAN or LAN for network flexibility. Connect 100+ Devices: MU-MIMO and OFDMA technology reduce network congestion and quadruple average throughput, keeping every device fast even in busy households. Extensive Coverage: 6 high-gain antennas, Beamforming, High-Power FEM, and 4T4R combine to push Wi-Fi signal further and more reliably throughout your home. EasyMesh Compatible: Pair with any EasyMesh-compatible TP-Link router or access point to create a seamless whole-home mesh Wi-Fi network. TP-Link HomeShield: Built-in network security with IoT device protection, real-time threat detection, parental controls, and new device connection notifications. VPN Client & Server: Built-in VPN support allows remote access to home network devices (NAS, cameras, printers) and secure cross-regional browsing from connected devices. USB 3.0 Port: Share files across your network or set up a private cloud by connecting an external USB drive directly to the router. Parental Controls: Block inappropriate content and set time limits for individual devices to encourage healthier online habits for children. Easy Setup: Configure in minutes via the Tether app (iOS & Android) or the full-featured web management interface. OTA firmware updates keep the router current automatically. Improved Thermal Design: Enlarged ventilation area dissipates heat more effectively for sustained peak performance under load. Use Cases High-Speed NBN & Fibre Homes: The 2.5 Gbps port ensures you’re not bottlenecked by a 1G WAN connection — ideal for NBN 1000 and full-fibre services. 8K Streaming & Gaming Households: AX5400 speeds and OFDMA keep multiple 4K/8K streams and online gaming sessions running smoothly at the same time. Smart Home Environments: MU-MIMO and 100+ device support handle the growing number of IoT devices, smart speakers, cameras, and appliances without degrading performance. Remote Work & Home Office: Built-in VPN client/server and stable Wi-Fi 6 connectivity support secure remote access and reliable video conferencing. Large Homes & Multi-Room Coverage: EasyMesh compatibility allows the AX72 Pro to act as the backbone of a whole-home mesh system, eliminating dead zones. Families with Children: HomeShield parental controls and content filtering provide a safer online environment for kids across all connected devices. Specifications Model Archer AX72 Pro Wi-Fi Standard Wi-Fi 6 (802.11ax) Wi-Fi Speed AX5400 — 574 Mbps (2.4 GHz) + 4804 Mbps (5 GHz) 5 GHz Configuration 4T4R, HE160, up to 4.8 Gbps Antennas 6 × Fixed High-Gain Antennas Multi-Gigabit Port 1 × 2.5 Gbps WAN/LAN (configurable) Gigabit Ports 1 × Gigabit WAN, 3 × Gigabit LAN USB 1 × USB 3.0 Device Capacity 100+ simultaneous devices MU-MIMO Yes (4×4) OFDMA Yes (Uplink & Downlink) Beamforming Yes EasyMesh Yes VPN VPN Client & VPN Server Security TP-Link HomeShield (IoT protection, threat detection, parental controls) App Management TP-Link Tether (iOS & Android) Firmware Updates OTA (automatic or manual) Weight 1.54 kg Certifications CE, FCC, RoHS Frequently Asked Questions Does the Archer AX72 Pro support NBN 1000? Yes. The 2.5 Gbps multi-gigabit WAN/LAN port allows the AX72 Pro to fully utilise high-speed NBN 1000 and full-fibre connections without the 1 Gbps bottleneck found on standard routers. You’ll need a compatible modem or ONT that also supports 2.5 Gbps output to take full advantage. What is the difference between the AX72 Pro and the standard AX72? The key upgrade on the AX72 Pro is the addition of a 2.5 Gbps multi-gigabit port, which can be configured as either WAN or LAN. This makes it significantly better suited to high-speed internet connections and NAS or server connectivity compared to the standard AX72, which is limited to 1 Gbps ports. Can I use the AX72 Pro in a mesh network? Yes. The AX72 Pro is EasyMesh compatible and can be paired with other EasyMesh-compatible TP-Link routers or access points to create a seamless whole-home mesh Wi-Fi network with a single SSID and automatic device roaming. Does HomeShield require a subscription? Basic HomeShield features — including network security scanning and parental controls — are available for free. Advanced features such as real-time IoT protection, detailed reports, and enhanced threat intelligence require a HomeShield Pro subscription. How do I set up the Archer AX72 Pro? Setup takes just a few minutes using the free TP-Link Tether app on iOS or Android. Alternatively, you can configure the router via the web management interface at tplinkwifi.net. OTA firmware updates can be enabled to keep the router automatically up to date. Does the AX72 Pro support VPN? Yes. It supports both VPN Client mode (allowing devices on your network to route traffic through a VPN server) and VPN Server mode (allowing external devices to securely access your home network, including NAS drives, cameras, and printers). Is the USB port suitable for NAS storage? The USB 3.0 port supports file sharing across your local network and can be used to create a basic private cloud accessible remotely. For a dedicated NAS experience with advanced features, a standalone NAS device is recommended — but for simple shared storage, the USB port works well. Downloads 📄 Archer AX72 Pro Datasheet (PDF)

Read more less

Whole-Home Wi-Fi Coverage with AC2600 Speed and 4×4 MU-MIMO The TP-Link RE650 is a high-performance AC2600 dual-band Wi-Fi range extender designed to eliminate dead zones and extend reliable wireless coverage across large homes, offices, and commercial spaces. With four external antennas, 4×4 MU-MIMO, and beamforming technology, the RE650 delivers fast, stable Wi-Fi to multiple devices simultaneously — all the way to the edges of your property. Description Operating on both 2.4GHz (up to 800Mbps) and 5GHz (up to 1733Mbps) bands concurrently, the RE650 provides a combined throughput of up to 2600Mbps. Its intelligent signal light guides you to the optimal placement location for maximum coverage. A built-in Gigabit Ethernet port lets you hardwire smart TVs, gaming consoles, or desktop PCs for the fastest possible wired connection. The RE650 also supports Access Point mode, converting a wired network into a full Wi-Fi access point. Manage everything via the TP-Link Tether app on iOS or Android. Key Features AC2600 dual-band Wi-Fi: 800Mbps (2.4GHz) + 1733Mbps (5GHz) 4×4 MU-MIMO — simultaneously serves multiple devices at full speed Beamforming — focuses Wi-Fi signal directly at connected devices 4 fixed external antennas — extends coverage up to 14,000 sq ft 1 × Gigabit Ethernet port for wired device connections Intelligent signal light for optimal placement guidance Access Point mode — adds Wi-Fi to any wired network Range Extender mode — boosts existing router coverage TP-Link Tether app support (iOS & Android) Compatible with any Wi-Fi router or wireless access point WPS one-touch setup Use Cases Large homes and multi-storey residences — eliminate Wi-Fi dead zones across every room and floor Home offices — maintain fast, stable connections for video calls, cloud storage, and remote work Entertainment setups — hardwire smart TVs and gaming consoles via the Gigabit port for lag-free streaming and gaming Small businesses and retail — extend Wi-Fi coverage across shopfronts, warehouses, or open-plan offices Wired-to-wireless conversion — use AP mode to add Wi-Fi capability to any Ethernet-connected network Security and surveillance — extend wireless coverage to reach IP cameras in hard-to-reach areas Specifications Specification Detail Model RE650 Wi-Fi Standard IEEE 802.11ac/n/g/b Wi-Fi Speed AC2600 (800Mbps @ 2.4GHz + 1733Mbps @ 5GHz) MIMO 4×4 MU-MIMO Antennas 4 × fixed external Coverage Up to 14,000 sq ft Ethernet Port 1 × 10/100/1000Mbps (RJ45) Wireless Modes Range Extender, Access Point Frequency Bands 2.4GHz & 5GHz (concurrent) Buttons WPS, Reset, LED, Power Power Consumption 12W (max) Dimensions 163 × 86 × 40 mm Weight 0.52g App Support TP-Link Tether (iOS & Android) SKU RE650 Barcode 6935364099411 Vendor TP-Link Frequently Asked Questions Will the RE650 work with my existing router? Yes. The RE650 is compatible with any Wi-Fi router or wireless access point, regardless of brand. What is the difference between Range Extender mode and Access Point mode? In Range Extender mode, the RE650 picks up your existing Wi-Fi signal and rebroadcasts it to extend coverage. In Access Point mode, it connects via Ethernet to your router and creates a new wireless access point — ideal for adding Wi-Fi to a wired network. How do I find the best location to place the RE650? The RE650 has an intelligent signal light on the front panel that indicates the strength of the signal from your router. Place it where the light shows a strong signal for optimal performance. Does the RE650 support MU-MIMO? Yes. The RE650 supports 4×4 MU-MIMO, which allows it to communicate with multiple devices simultaneously rather than one at a time, improving overall network efficiency. Can I manage the RE650 from my phone? Yes. The TP-Link Tether app (available for iOS and Android) lets you set up and manage the RE650 from your smartphone or tablet. Does the Gigabit port support full 1Gbps speeds? Yes. The RE650 includes a 10/100/1000Mbps Gigabit Ethernet port for wired connections to devices such as smart TVs, gaming consoles, and desktop computers. Does CCTV Guru ship this product Australia-wide? Yes. The RE650 is stocked locally and ships Australia-wide.

Read more less

TP-Link Archer VR300 AC1200 VDSL/ADSL Modem Router NBN-Ready Dual-Band Modem Router for Australian Homes & Offices The TP-Link Archer VR300 is an AC1200 dual-band VDSL/ADSL modem router designed for reliable broadband performance on NBN FTTN, FTTB, and legacy ADSL/ADSL2+ connections. With combined wireless speeds of up to 1.2 Gbps, built-in security features, and straightforward web-based management, it's a solid all-in-one solution for households and small offices across Australia. Key Features AC1200 dual-band Wi-Fi — 867 Mbps at 5 GHz + 300 Mbps at 2.4 GHz Compatible with VDSL2, ADSL, ADSL2, and ADSL2+ — NBN FTTN/FTTB ready 4 fixed external antennas for broad, stable wireless coverage Parental controls — manage and restrict internet access by device Guest network — separate Wi-Fi access for visitors without exposing your main network Firewall security — DoS protection, SPI firewall, IP/MAC address binding, and domain filtering Quality of Service (QoS) — prioritise bandwidth by device or application IPTV support via IGMP Proxy/Snooping with Bridge and Tag VLAN IPv6 compatible WPS one-touch wireless setup Use Cases NBN FTTN/FTTB Households: Replace your ISP-supplied modem with a more capable unit that supports VDSL2 up to Profile 17a. ADSL/ADSL2+ Connections: Fully backward-compatible with legacy ADSL services where NBN is not yet available. Family Homes: Use parental controls and guest networking to manage who accesses what on your network. Small Offices: QoS and firewall features ensure business-critical traffic is prioritised and the network stays secure. IPTV Users: IGMP Proxy/Snooping support ensures smooth streaming for IPTV services over your broadband connection. Specifications Specification Detail Model Archer VR300 Wi-Fi Standard IEEE 802.11ac/n/a (5 GHz), IEEE 802.11n/g/b (2.4 GHz) Wireless Speeds 867 Mbps @ 5 GHz + 300 Mbps @ 2.4 GHz (AC1200) DSL Standards VDSL2 (up to Profile 17a), ADSL, ADSL2, ADSL2+ LAN Ports 3 × 10/100 Mbps RJ45 + 1 × 10/100 Mbps RJ45 LAN/WAN DSL Port 1 × RJ11 Antennas 4 × fixed external antennas Dimensions (W × D × H) 385 × 290 × 76 mm Power Supply 12 V / 1 A Wireless Security WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS Operating Modes VDSL/ADSL Modem Router, Wireless Router Management Web UI (HTTP), Remote Management, CLI, TR-069 (SSL), SNMP v1/v2c IPv6 Supported Weight 0.84 kg Frequently Asked Questions Is the Archer VR300 compatible with Australian NBN FTTN/FTTB? Yes. The VR300 supports VDSL2 up to Profile 17a, which is the standard used by NBN FTTN (Fibre to the Node) and FTTB (Fibre to the Building) connections in Australia. It is compatible with major Australian ISPs including Telstra, Optus, TPG, and Aussie Broadband. Can I use this router with a standard ADSL2+ connection? Yes. The VR300 is fully backward-compatible with ADSL, ADSL2, and ADSL2+ services, making it suitable for areas not yet covered by NBN. Does it support a separate WAN port for fibre or cable connections? Yes. The fourth LAN port can be configured as a WAN port, allowing the VR300 to operate as a standard wireless router when connected to an external modem or ONT (e.g., NBN FTTP or HFC). How do I set up parental controls? Parental controls are configured through the web-based management interface. Log in to the router at 192.168.1.1, navigate to the Parental Controls section, and add devices by MAC address with time and content restrictions. Does the VR300 support IPTV? Yes. The router supports IGMP Proxy and IGMP Snooping with Bridge and Tag VLAN configurations, which are required for IPTV services offered by some Australian ISPs. What is the difference between the 2.4 GHz and 5 GHz bands? The 2.4 GHz band (300 Mbps) offers longer range and better wall penetration, making it suitable for devices further from the router. The 5 GHz band (867 Mbps) provides faster speeds with less interference, ideal for streaming and gaming on nearby devices.

Read more less

AXIS T8154 60 W SFP Midspan, 02740-006, High PoE 60 W AXIS T8154 60 W SFP Midspan is a compact, plug-and-play media converter with PoE. With its integrated power supply, it minimizes the amount of cabling and facilitates installation. AXIS T8154 offers data input through SFP or RJ45, and delivers High PoE 60 W. It works with all Axis network products supporting Power over Ethernet. For network or fiber installations SFP slot for fiber Integrated midspan High PoE 60 W Support for all Axis network products Downloads AXIS T8154 Datasheet

Read more less

Mercusys MR70X AX1800 Dual-Band WiFi 6 Router, Up to 1.8Gbps, OFDMA, MU-MIMO, WPA3MR70XAX1800 Dual-Band WiFi 6 RouterNext-Gen WiFi 6 Speeds – Optimal WiFi 6 speeds reaching up to 1.8 Gbps (1201 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band)4× More Capacity – OFDMA and MU-MIMO allow simultaneous data transmission to and from several devices, improving overall network efficiencyBroader, Stronger Coverage – 4× multi-directional high-gain antennas with Beamforming boost stable connections throughout your home for strong WiFi signals in every cornerOverall Security Protection – The latest WPA3 provides improved WiFi securityGigabit Wired Connections – Make full use of your internet access and transfer data at dizzying speeds for peak performanceEco-Friendly Power Saving – Target Wake Time (TWT) reduces power consumption for your mobile and IoT devices during data transmissionsLess WiFi Interference – Minimizes the interference from neighboring signals to improve transmission efficiency with BSS colorSmart Connect – Intelligently chooses the best available band for each deviceAccess Point Mode – Extends a wired network and makes it wirelessWirelessWireless StandardsCompatible with 802.11ax/ac/a/b/g/n Wi-Fi standardsSignal Rate1201 Mbps (5 GHz) + 574 Mbps (2.4 GHz)Reception Sensitivity11g 6Mbps: -96dBm11g 54Mbps: -78dBm11n HT40 MCS7:-74dBm11n HT20 MCS7:-77dBm11a 6Mbps:-94dBm11a 54Mbps:-76dBm11ac VHT20 MCS8:-71dBm11ac VHT40 MCS8:-68dBm11ac VHT80 MCS8:-65dBmTransmission Power2.4 GHz < 20dBm (EIRP)5 GHz < 23dBm (EIRP)Wireless SecurityWPA-PSK / WPA2-PSK/ WPA3 wireless encryptionWireless FunctionsEnable/Disable Wireless Radio, WMMSoftwareWAN TypeDynamic IP/Static IP/PPPoE/L2TP/PPTPManagementAccess ControlLocal ManagementRemote ManagementDHCPServer, DHCP Client ListNAT ForwardingPort Forwarding, Port Triggering, UPnP, DMZFirewall SecuritySPI

Read more less

TP-Link Archer C54 AC1200 Dual-Band Wi-Fi Router – 4 Antennas | 3-in-1 Modes Overview The TP-Link Archer C54 is a compact AC1200 dual-band Wi-Fi router designed to deliver fast, reliable wireless coverage for homes and small offices. With 867Mbps on 5GHz and 300Mbps on 2.4GHz, four fixed antennas, and beamforming technology, it provides strong, far-reaching Wi-Fi suited to 3-bedroom homes. Its versatile 3-in-1 design supports Router, Access Point, and Range Extender modes, making it a flexible solution for a wide range of network setups. Parental controls, guest network, IPTV support, and IPv6 compatibility round out a feature set that punches well above its price point. Key Features AC1200 Dual-Band Wi-Fi – 867Mbps on 5GHz and 300Mbps on 2.4GHz for fast, flexible wireless connectivity across all your devices. 4 Fixed Antennas with Beamforming – Multiple antennas form a signal-boosting array; beamforming concentrates wireless signal towards connected clients for extended range and more reliable connections. MU-MIMO – Simultaneously communicates with multiple MU-MIMO-capable devices for more efficient network performance on busy home networks. 3-in-1 Operating Modes – Operates as a standalone Router, a wireless Access Point, or a Range Extender — choose the mode that suits your network setup. Parental Controls – Manage when and how connected devices access the internet with per-device scheduling and content controls. Guest Network – Create a separate Wi-Fi network for guests to keep your main network secure. IPTV Support – Supports IGMP Proxy/Snooping, Bridge, and Tag VLAN for smooth IPTV and HD streaming. IPv6 Compatible – Ready for the latest internet protocol standard. Compact & Wall-Mountable – Slim, space-saving design that can be wall-mounted to complement any room. Use Cases Home Wi-Fi for 2–3 bedroom houses requiring reliable coverage throughout 4K video streaming and high-speed downloading on the 5GHz band Households with multiple devices needing simultaneous connections Adding wireless access to an existing wired network (Access Point mode) Extending Wi-Fi coverage from an existing router (Range Extender mode) IPTV and NBN-connected homes requiring VLAN support Technical Specifications Specification Details Model Archer C54 Wi-Fi Standard Wi-Fi 5 (802.11ac/n/a/b/g) 5GHz Speed Up to 867Mbps (802.11ac) 2.4GHz Speed Up to 300Mbps (802.11n) Antennas 4 × Fixed External Antennas Beamforming Yes MU-MIMO Yes WAN Port 1 × 10/100Mbps LAN Ports 4 × 10/100Mbps Operating Modes Router / Access Point / Range Extender IPTV Support IGMP Proxy/Snooping, Bridge, Tag VLAN IPv6 Supported Buttons WPS, Reset Power 5V — 0.6A Dimensions 115 × 106.7 × 24.3mm Frequently Asked Questions Is the Archer C54 suitable for NBN connections in Australia? Yes. The Archer C54 works with all major Australian NBN connection types (FTTC, FTTN, FTTB, HFC) when connected to your NBN modem. It also supports VLAN tagging (Tag VLAN) which is required for IPTV services on some NBN providers. Check with your ISP for specific VLAN configuration requirements. What is the difference between Router, Access Point, and Range Extender modes? In Router mode, the C54 connects to your modem and manages your home network. In Access Point mode, it connects to an existing router via Ethernet and adds wireless coverage without replacing your current setup. In Range Extender mode, it wirelessly extends the signal from an existing router to cover dead zones. All modes are selectable via the Tether app or web interface. How many devices can the Archer C54 handle? The Archer C54 is rated for medium-capacity networks. With MU-MIMO and dual-band support, it handles typical home usage comfortably — generally suited to households with up to 20–25 simultaneously connected devices. For larger households or heavier usage, consider a higher-capacity router. Does the C54 support parental controls? Yes. Parental controls are available via the TP-Link Tether app, allowing you to set internet access schedules and content filters on a per-device basis to manage children’s online activity. Can I set up a guest Wi-Fi network on the Archer C54? Yes. The Archer C54 supports a separate guest network on both 2.4GHz and 5GHz bands, keeping guest devices isolated from your main home network for improved security. NBN Note: The Archer C54’s WAN and LAN ports are 10/100Mbps (Fast Ethernet), which limits wired speeds to 100Mbps. If your NBN plan exceeds 100Mbps, wired devices will be capped at this speed. For plans above 100Mbps, consider a router with Gigabit Ethernet ports.

Read more less

Fast, Flexible Wi-Fi for Home and Small Office NetworksThe TP-Link Archer C24 is a compact AC750 dual-band Wi-Fi router that delivers reliable wireless connectivity for everyday internet use. With three operating modes — Router, Access Point, and Range Extender — it adapts to a wide range of network setups. Four fixed antennas and beamforming technology help extend coverage throughout the home or small office.Key Features AC750 Dual-Band Wi-Fi — 300Mbps on 2.4GHz for everyday browsing and 433Mbps on 5GHz for smoother streaming and gaming 3-in-1 Multi-Mode — operates as a wireless router, access point, or range extender to suit any network layout 4× Fixed Antennas — extended coverage with beamforming technology to focus signal where it’s needed 4× LAN + 1× WAN Ports — wired connections for smart TVs, gaming consoles, and desktop PCs Parental Controls — manage internet access times and block inappropriate content by device Guest Network — separate Wi-Fi for visitors without exposing your main network WPS One-Touch Setup — quick and easy wireless connection for compatible devices IPv6 Support — future-ready for next-generation internet connections Wall-Mountable — compact design with mounting options for flexible placement Typical Use Cases Home broadband router for NBN, ADSL, or cable internet connections Access point to extend a wired network with wireless coverage Range extender to boost Wi-Fi signal in dead zones Guest Wi-Fi for Airbnb, small offices, or retail environments Secondary router for a separate network zone or IoT devices Technical Specifications Specification Detail Model Archer C24 Wi-Fi Standard IEEE 802.11ac/n/a (5GHz), IEEE 802.11n/b/g (2.4GHz) Wi-Fi Speed AC750: 433Mbps (5GHz) + 300Mbps (2.4GHz) Antennas 4× Fixed External Antennas WAN Port 1× 10/100 Mbps LAN Ports 4× 10/100 Mbps Operating Modes Router, Access Point, Range Extender Security WPA/WPA2/WPA2-Enterprise, SPI Firewall, Guest Network Buttons WPS, Power On/Off, Reset Power Supply 5V / 0.6A Dimensions (W×D×H) 115 × 106.7 × 24.3 mm IPv6 Supported Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Is the Archer C24 compatible with Australian NBN connections? Yes. The Archer C24 supports PPPoE, Dynamic IP, and Static IP WAN connection types, covering all common NBN connection methods. Simply connect it to your NBN modem or gateway via the WAN port. What is the difference between Router, Access Point, and Range Extender modes? In Router mode, the C24 manages your network and connects directly to a modem. In Access Point mode, it connects via Ethernet to an existing router and adds wireless coverage. In Range Extender mode, it wirelessly repeats an existing Wi-Fi signal to extend its reach. Can I use the Archer C24 as a second router in my home? Yes. In Access Point mode, it can be connected to your main router via Ethernet to provide additional wireless coverage in areas with weak signal. Does it support parental controls? Yes. The Archer C24 includes built-in parental controls that allow you to restrict internet access by device and set time schedules. Does the Archer C24 support WPA3 security? No. The Archer C24 supports WPA2 and WPA2-Enterprise as its highest security standard. For WPA3 support, consider a newer Wi-Fi 6 router from the TP-Link range.

Read more less

TP-Link Archer VR400 AC1200 VDSL/ADSL Modem Router with USB NBN-Ready AC1200 Modem Router with USB & 3G/4G Backup The TP-Link Archer VR400 is an AC1200 dual-band VDSL/ADSL modem router built for Australian NBN FTTN, FTTB, and legacy ADSL/ADSL2+ broadband connections. With combined wireless speeds of up to 1.2 Gbps, 5 GHz Beamforming, a USB 2.0 port for storage and print sharing, and support for 3G/4G USB dongles as a backup connection, the VR400 is a versatile all-in-one solution for homes and small offices. Key Features AC1200 dual-band Wi-Fi — 867 Mbps at 5 GHz + 300 Mbps at 2.4 GHz Compatible with VDSL2, ADSL, ADSL2, and ADSL2+ — NBN FTTN/FTTB ready Beamforming technology on 5 GHz for improved range and targeted signal strength 3 fixed external antennas for stable, wide-area wireless coverage USB 2.0 port — supports storage sharing (FTP & media server), print server, and 3G/4G USB dongle for backup internet 1 × Gigabit LAN/WAN port + 3 × Fast Ethernet LAN ports + 1 × RJ11 DSL port Wireless schedule — set Wi-Fi on/off times for 2.4 GHz and 5 GHz independently WPS one-touch wireless setup Managed via the TP-Link Tether app (iOS & Android) Use Cases NBN FTTN/FTTB Households: Replace your ISP-supplied modem with a more capable unit supporting VDSL2 up to Profile 17a with Beamforming for better 5 GHz range. ADSL/ADSL2+ Connections: Fully backward-compatible for areas not yet on NBN. Home NAS & Media Sharing: Plug a USB hard drive into the VR400 to create a simple FTP or media server accessible across your home network. 3G/4G Backup: Connect a compatible USB dongle to maintain internet access during NBN outages — ideal for home offices and small businesses. Family Homes: Wireless scheduling lets you automatically turn off Wi-Fi at set times, and the Tether app makes remote management simple. Specifications Specification Detail Model Archer VR400 Wi-Fi Standard IEEE 802.11ac/n/a (5 GHz), IEEE 802.11n/g/b (2.4 GHz) Wireless Speeds 867 Mbps @ 5 GHz + 300 Mbps @ 2.4 GHz (AC1200) DSL Standards VDSL2 (up to Profile 17a), ADSL, ADSL2, ADSL2+ LAN Ports 3 × 10/100 Mbps RJ45 + 1 × 10/100/1000 Mbps RJ45 LAN/WAN DSL Port 1 × RJ11 USB Port 1 × USB 2.0 (storage, print server, 3G/4G dongle) Antennas 3 × fixed external antennas Beamforming Yes (5 GHz) Power Supply 12 V / 1.5 A Wireless Security WEP (64/128-bit), WPA/WPA2, WPA-PSK/WPA2-PSK, MAC Filtering, WPS Wireless Schedule Yes — independent scheduling for 2.4 GHz and 5 GHz App Management TP-Link Tether (iOS & Android) Dimensions (W × D × H) 243.5 × 167.5 × 32.7 mm Weight 0.86 kg Frequently Asked Questions Is the Archer VR400 compatible with Australian NBN FTTN/FTTB? Yes. The VR400 supports VDSL2 up to Profile 17a, the standard used by NBN FTTN and FTTB connections. It is compatible with major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet. How does the 3G/4G backup work? Plug a compatible 3G or 4G USB dongle into the VR400’s USB port. The router can be configured to automatically switch to the mobile connection if the primary DSL/NBN connection drops, providing continuity for home offices and critical applications. Can I use the USB port as a NAS drive? Yes. Connect a USB hard drive or flash drive to share files across your local network via FTP or as a media server. This is suitable for basic home file sharing but is not a replacement for a dedicated NAS device. What is the difference between the VR400 and the VR300? The Archer VR400 adds a USB 2.0 port (for storage, print server, and 3G/4G backup), Beamforming on the 5 GHz band, and a Gigabit LAN/WAN port compared to the VR300. It is the more feature-rich option for users who need USB connectivity or 3G/4G failover. Does it support a separate WAN port for fibre or cable connections? Yes. The Gigabit LAN/WAN port can be configured as a dedicated WAN port, allowing the VR400 to operate as a standard wireless router when connected to an external modem or ONT (e.g., NBN FTTP or HFC).

Read more less

TP-Link TL-MR100 300Mbps Wireless N 4G LTE Router Instant 4G Broadband — Just Insert a SIM Card The TP-Link TL-MR100 is a 300 Mbps Wireless N 4G LTE router that delivers broadband internet connectivity anywhere a 4G or 3G mobile signal is available. Simply insert a compatible SIM card and the router automatically connects to the network — no technician, no fixed-line infrastructure required. With 4 Fast Ethernet LAN ports and 2.4 GHz Wi-Fi, it’s an ideal primary or backup internet solution for Australian homes, small offices, caravans, and remote sites. Key Features 4G LTE / 3G compatible — insert a SIM card for instant broadband, no fixed-line required 300 Mbps wireless N (2.4 GHz) — reliable Wi-Fi for everyday browsing, streaming, and remote work 4 × Fast Ethernet LAN ports for wired device connections 1 × WAN port for optional fixed-line (ADSL/cable/fibre) connection as primary or backup Automatic 4G/3G/2G network selection — connects to the strongest available signal Supports standard micro-SIM cards from Australian carriers (Telstra, Optus, Vodafone, etc.) 2 × detachable external antennas for improved 4G signal reception WPS one-touch wireless setup Managed via web-based interface — no software installation required 3-year warranty Use Cases Primary 4G Broadband: Use a 4G SIM as your main internet connection where fixed-line NBN or ADSL is unavailable or unreliable. Backup Internet: Connect via 4G SIM as a failover when your fixed-line connection goes down — ideal for small businesses that can’t afford downtime. Remote & Rural Sites: Provide internet access at properties, farms, or work sites where fixed-line infrastructure doesn’t reach. Caravans & Temporary Sites: Portable 4G connectivity for caravans, construction sites, pop-up offices, or events. Small Offices: Share a 4G connection across multiple wired and wireless devices without a fixed-line contract. Specifications Specification Detail Model TL-MR100 4G Standard LTE FDD/TDD, DC-HSPA+, HSPA+, HSPA, UMTS, EDGE, GPRS, GSM SIM Card Type Micro-SIM (standard 4FF) Wi-Fi Standard IEEE 802.11b/g/n — 2.4 GHz Wireless Speed Up to 300 Mbps LAN Ports 4 × 10/100 Mbps RJ45 WAN Port 1 × 10/100 Mbps RJ45 Antennas 2 × detachable external (4G) + 2 × fixed internal (Wi-Fi) Wireless Security WPA/WPA2, WPA-PSK/WPA2-PSK, WPS Management Web-based UI Power Supply 9 V / 0.6 A Warranty 3 years Frequently Asked Questions Which Australian SIM cards are compatible with the TL-MR100? The TL-MR100 accepts a standard micro-SIM card and is compatible with Australian 4G carriers including Telstra, Optus, and Vodafone. Check that your SIM plan includes data and that the router’s supported LTE bands match your carrier’s network bands in your area. Can I use the TL-MR100 as a backup internet connection? Yes. The TL-MR100 has a WAN port that can be connected to a fixed-line modem (ADSL, cable, or fibre). When the fixed-line connection fails, the router can fall back to the 4G SIM connection, providing continuity of service. Does the TL-MR100 support NBN? The TL-MR100 is a 4G LTE router and does not connect directly to NBN infrastructure. However, it can be used as a standalone 4G broadband solution or as a backup alongside an NBN connection via the WAN port. What type of SIM card does it use? The TL-MR100 uses a micro-SIM card (also known as a 3FF SIM). If your carrier provides a nano-SIM, you will need a nano-to-micro SIM adapter, available from most electronics retailers. How do I manage data usage on the TL-MR100? The web-based management interface includes data usage monitoring and allows you to set monthly data limits and alerts to help avoid exceeding your SIM plan’s data allowance. Can I improve 4G signal reception? Yes. The TL-MR100 has two detachable external antenna ports (TS-9 connectors) that support optional external high-gain 4G antennas, which can significantly improve signal strength in areas with weak coverage.

Read more less

TP-Link M7450 – LTE-Advanced 4G Mobile Wi-Fi Hotspot AC1200 Dual Band The TP-Link M7450 is a pocket-sized LTE-Advanced Category 6 mobile Wi-Fi hotspot that delivers fast 4G internet to up to 32 devices simultaneously — wherever there’s mobile coverage. With AC1200 dual band Wi-Fi, a 3000mAh battery rated for 15+ hours of use, a microSD card slot for shared storage, and a 1.44-inch display for at-a-glance status, it’s a capable mobile connectivity solution for travellers, field technicians, remote workers, and temporary site deployments across Australia. Key Features LTE-Advanced Cat6: Download speeds up to 300Mbps and upload speeds up to 50Mbps on compatible 4G networks — significantly faster than standard 4G. AC1200 Dual Band Wi-Fi: 300Mbps on 2.4GHz or 867Mbps on 5GHz (IEEE 802.11a/b/g/n/ac) for flexible device connectivity. Connects Up to 32 Devices: Share your 4G connection with smartphones, tablets, laptops, and IoT devices simultaneously. 3000mAh Battery — 15+ Hours: All-day battery life for extended use in the field, on site, or while travelling. MicroSD Card Slot: Supports up to 32GB microSD cards for shared file storage accessible to all connected devices over Wi-Fi. 1.44-Inch TFT Display: Shows signal strength, battery level, connected devices, and data usage at a glance — no app required for basic status monitoring. tpMiFi App: Manage settings, monitor data usage, and configure the hotspot from iOS or Android via the free tpMiFi app. Broad Network Band Support: Compatible with FDD-LTE, TDD-LTE, DC-HSPA+, HSPA, UMTS, EDGE, GPRS, and GSM across multiple frequency bands for wide Australian carrier compatibility. Micro SIM Slot: Insert any compatible Australian SIM card (Telstra, Optus, Vodafone, or MVNOs) — nano-to-micro SIM adapter included. Compact & Lightweight: 112.5 × 66.5 × 16mm and just 0.24kg — fits in a shirt pocket or tool bag. Ideal Use Cases Providing internet access for field technicians and security installers on job sites without fixed broadband. Temporary site connectivity for construction sites, events, and remote monitoring deployments. Travel and remote work requiring reliable 4G internet across multiple devices. Backup internet connectivity when fixed broadband is unavailable or fails. Sharing files via microSD across a team of devices on a local Wi-Fi network without internet dependency. Connecting IP cameras or NVRs to a mobile network for temporary or remote surveillance deployments. Technical Specifications Specification Detail Model M7450 LTE Category Cat6 (LTE-Advanced) Download Speed Up to 300Mbps Upload Speed Up to 50Mbps FDD-LTE Bands B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz) TDD-LTE Bands B38/B40/B41 (2600/2300/2500MHz) 3G (UMTS/HSPA) DC-HSPA+/HSPA/UMTS: B1/B8 (2100/900MHz) 2G (GSM) EDGE/GPRS/GSM: 850/900/1800/1900MHz Wi-Fi Standard IEEE 802.11a/b/g/n/ac (dual band) Wi-Fi Speed (2.4GHz) Up to 300Mbps Wi-Fi Speed (5GHz) Up to 867Mbps Max Connected Devices 32 SIM Slot 1 × Micro SIM (nano-to-micro adapter included) MicroSD Slot Up to 32GB Battery 3000mAh rechargeable (15+ hours) Display 1.44-inch TFT Power / Charging Micro USB Wireless Security WPA-PSK / WPA2-PSK, MAC filtering Management App tpMiFi (iOS & Android) Transmit Power <20dBm (2.4GHz) / <23dBm (5GHz) Dimensions 112.5 × 66.5 × 16 mm Weight 0.24kg Certifications CE, RoHS SKU M7450 Barcode (EAN) 1210002604147 What’s in the Box 1 × M7450 Mobile Wi-Fi Hotspot 1 × 3000mAh Rechargeable Battery 1 × Micro USB Cable 1 × Nano-to-Micro SIM Card Adapter Quick Installation Guide Frequently Asked Questions Does the M7450 work with Australian carriers? The M7450 supports a broad range of LTE frequency bands including B1, B3, B7, B8, B20 (FDD-LTE) and B38, B40, B41 (TDD-LTE). Coverage on Australian carriers (Telstra, Optus, Vodafone) depends on which bands each carrier uses in your area. We recommend confirming band compatibility with your carrier before purchasing, particularly for regional or rural areas. What size SIM card does the M7450 use? The M7450 uses a Micro SIM card. A nano-to-micro SIM adapter is included in the box if your carrier provides a nano SIM. How long does the battery last? TP-Link rates the 3000mAh battery for 15+ hours of continuous use. Actual battery life depends on signal strength, number of connected devices, Wi-Fi band in use, and whether the microSD card is active. Can I use the M7450 while it’s charging? Yes. The M7450 can be used while connected to a Micro USB power source, making it suitable for use as a semi-permanent hotspot when plugged into a power bank or USB wall adapter. How do I manage the hotspot settings? Settings can be managed via the 1.44-inch on-device display and buttons, through a web browser interface, or via the free tpMiFi app on iOS or Android for more detailed configuration and data usage monitoring. Can I use the microSD slot without an internet connection? Yes. The microSD card functions as shared network storage accessible to all Wi-Fi connected devices regardless of whether a SIM card is inserted or mobile data is active. Is the M7450 suitable for connecting IP cameras on a remote site? Yes. The M7450 can provide 4G internet connectivity to IP cameras, NVRs, or access control systems on temporary or remote sites where fixed broadband is unavailable. Ensure your 4G data plan supports the required upload bandwidth for your camera stream quality and number of cameras.

Read more less

Next-Generation Wi-Fi 6 Speed and Coverage for the Whole HomeThe TP-Link Archer AX72 is an AX5400 dual-band Wi-Fi 6 router built for households that demand fast, reliable wireless connectivity across multiple devices. With combined speeds of up to 5400 Mbps, support for 200+ simultaneous connections, and TP-Link HomeShield security, the AX72 is a significant upgrade for any home or small office network on NBN or fibre.Key Features AX5400 Wi-Fi 6 — 4804 Mbps on 5 GHz (HE160) + 574 Mbps on 2.4 GHz for combined speeds up to 5400 Mbps 4T4R + HE160 — top-tier Wi-Fi 6 structure for maximum 5 GHz throughput and range MU-MIMO & OFDMA — simultaneously serves multiple devices, reducing congestion and quadrupling average throughput Connect 200+ Devices — ideal for smart homes with many concurrent Wi-Fi clients 6× Fixed High-Performance Antennas — with Beamforming to concentrate signal towards connected devices HomeShield Security — TP-Link’s premium network and IoT protection suite, including parental controls and real-time threat detection 1× USB 3.0 Port — share storage devices or build a private cloud across your network DFS Support — accesses additional 5 GHz channels to reduce wireless congestion Easy Setup — configure in minutes via the TP-Link Tether app Typical Use Cases High-speed NBN or fibre home networking for 3-bedroom houses and larger 4K/8K streaming and online gaming with low latency Smart home hubs managing 50+ IoT devices simultaneously Home offices requiring fast, stable Wi-Fi for video conferencing and large file transfers USB network-attached storage (NAS) for media sharing across the home Technical Specifications Specification Detail Model Archer AX72 Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a 5GHz, 802.11ax/n/b/g 2.4GHz) Wi-Fi Speed AX5400: 4804 Mbps (5GHz, HE160) + 574 Mbps (2.4GHz) Antennas 6× Fixed High-Performance External Antennas MIMO 4×4 MU-MIMO OFDMA Supported (2.4GHz & 5GHz) WAN Port 1× Gigabit WAN LAN Ports 4× Gigabit LAN USB 1× USB 3.0 Operating Modes Router Mode, Access Point Mode Security WPA/WPA2/WPA3, HomeShield, SPI Firewall, Guest Network Management TP-Link Tether App, Web Interface Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Is the Archer AX72 compatible with Australian NBN connections? Yes. The AX72 supports PPPoE, Dynamic IP, and Static IP WAN types, covering all NBN connection methods including FTTP, FTTC, FTTN, and HFC. Connect it directly to your NBN modem or gateway via the Gigabit WAN port. What is the difference between Wi-Fi 6 and Wi-Fi 5 (AC)? Wi-Fi 6 (802.11ax) delivers faster speeds, lower latency, and significantly better performance in environments with many connected devices compared to Wi-Fi 5 (802.11ac). Technologies like OFDMA and MU-MIMO allow the AX72 to serve multiple devices simultaneously rather than sequentially. Do I need Wi-Fi 6 devices to benefit from the Archer AX72? No. The AX72 is backwards compatible with Wi-Fi 5, Wi-Fi 4, and older devices. However, the full speed and efficiency benefits of Wi-Fi 6 are only realised when connecting Wi-Fi 6-capable devices. What is HomeShield and is it free? HomeShield is TP-Link’s network security platform offering parental controls, IoT device protection, and real-time threat detection. Basic features are free; advanced features require a HomeShield Pro subscription. Can I use the USB 3.0 port for network storage? Yes. You can connect a USB hard drive or flash drive to the USB 3.0 port and share it across your network as a basic NAS (Network Attached Storage) device, accessible via the Tether app or web interface.

Read more less