UniFi Switches

UniFi Network — NDAA Compliant Ubiquiti UniFi Switch Lite 8 PoE — 8-Port Gigabit Managed Switch (USW-Lite-8-PoE) The UniFi Switch Lite 8 PoE (USW-Lite-8-PoE) is a compact, fully managed Layer 2 Gigabit switch built for clean, single-pane UniFi deployments. Eight GbE RJ45 ports — four of them PoE+ (802.3at) with a 52W total PoE budget — power and connect your access points, IP cameras, and VoIP phones from one fanless, silent unit. Whether you're wiring a home office, retail counter, or small business anywhere in Australia, it manages effortlessly through the UniFi Network application. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 8x GbE (4x PoE+) PoE Budget 52W Total Cooling Fanless & Silent Management UniFi Network Why Choose the UniFi Switch Lite 8 PoE? 8 Gigabit Ports, 4 with PoE+ Eight GbE RJ45 ports — four delivering PoE/PoE+ up to 30W each — power and connect cameras, access points, and VoIP phones over a single cable while four data-only ports handle the rest. 52W Total PoE Budget A 52W PoE budget (with the included 60W power adapter) drives multiple PoE devices at once — perfect for a small UniFi camera or access-point cluster. Silent Fanless Design Passive cooling means zero noise — ideal for desks, reception areas, meeting rooms, and any space where a noisy switch isn't welcome. Full Layer 2 Management VLANs, STP/RSTP, IGMP snooping, LACP aggregation, port mirroring, storm control, 802.1X, DHCP snooping, ACLs, and more — enterprise-grade control in a compact unit. Managed in UniFi Network Adopt and configure from the UniFi Network application (v7.2.94+) for one-pane visibility across your entire UniFi stack — no per-device logins. Compact & Wall-Mountable At just 99.6 x 163.7 x 31.7 mm and 295 g, it sits on a desk or mounts to a wall with the included mounting kit — tidy installs in tight spaces. 16 Gbps Switching Capacity 8 Gbps non-blocking throughput and 16 Gbps switching capacity keep traffic flowing at full line rate across all eight ports. NDAA Compliant Confirmed NDAA Section 889 compliant by Ubiquiti — suitable for government, defence, and security-sensitive installations. Technical Specifications Model USW-Lite-8-PoE Networking Interface (8) 10/100/1000 MbE RJ45 ports PoE Interface (4) PoE/PoE+ (802.3af/at) Max. PoE per Port (PSE) PoE+: 30W Total PoE Budget 52W (with included 60W power adapter) Switching Capacity 16 Gbps Non-Blocking Throughput 8 Gbps Forwarding Rate 12 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Management Layer 2 — UniFi Network (Ethernet in-band) Power Method External 54V / 60W AC/DC adapter (included) Supported Voltage Range 50–57V DC Max. Power Consumption 8W (excluding PoE output) Enclosure Polycarbonate Dimensions / Weight 99.6 × 163.7 × 31.7 mm • 295 g Mounting Compact desktop & wall (kit included) Operating Temperature −15°C to 40°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Application Requirements UniFi Network v7.2.94 and later Downloads & Resources USW-Lite-8-PoE Tech Specs Datasheet (PDF) What's in the Box UniFi Switch Lite 8 PoE USW-Lite-8-PoE 8-port Gigabit managed PoE switch. 60W Power Adapter External 54V / 60W AC/DC power adapter included. Wall-Mount Kit Mounting hardware for tidy wall installs included. Not Included Network cables and a UniFi Network host (Cloud Gateway / Cloud Key / self-hosted) are required separately. Best For Homes & Home Offices Power a couple of cameras and an access point silently from a single tidy desktop switch. Retail & Reception Fanless and compact for front-of-house spaces where silence and clean cabling matter. Small Business Full Layer 2 VLAN and security control managed centrally in the UniFi Network app. UniFi Camera & AP Clusters 52W PoE budget feeds a small group of UniFi Protect cameras or access points over one cable each. Requires a UniFi Network host (Cloud Gateway, Cloud Key, or self-hosted controller) running UniFi Network v7.2.94 or later for management. 52W PoE budget across 4 PoE+ ports — plan device wattage so total draw stays within budget. Mounts on a desk or wall using the included kit; passive cooling means no airflow clearance needed for fans. Use the included 60W adapter to unlock the full 52W PoE budget. Frequently Asked Questions How many PoE ports does the USW-Lite-8-PoE have? Four of the eight Gigabit ports support PoE/PoE+ (up to 30W per port), with a 52W total PoE budget. The other four ports are data-only. Does it need a separate controller? Yes. It's managed through the UniFi Network application, which runs on a UniFi Cloud Gateway, Cloud Key, or a self-hosted controller (v7.2.94 or later). Is it fanless? Yes. The switch uses passive cooling for completely silent operation — ideal for offices, desks, and reception areas. Is the power adapter included? Yes. An external 54V / 60W AC/DC power adapter is included in the box, along with a wall-mount kit. Is the USW-Lite-8-PoE NDAA compliant? Yes. Ubiquiti confirms the switch is NDAA Section 889 compliant, making it suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Lite 16 PoE — 16-Port Gigabit Layer 2 Managed Switch (USW-Lite-16-POE) The Ubiquiti UniFi Switch Lite 16 PoE (USW-Lite-16-POE) is a compact, fanless Layer 2 managed switch built for quiet, reliable networking. It provides 16 Gigabit Ethernet RJ45 ports — 8 of them 802.3at PoE+ with a 45W total PoE budget — to power and connect cameras, access points, and IoT devices over a single cable. With silent fanless cooling, full UniFi Network management, and a wall-mount kit in the box, it's ideal for homes, offices, retail, and small commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x GbE RJ45 PoE 8x PoE+ • 45W Cooling Silent Fanless Management Layer 2 / UniFi Why Choose the UniFi Switch Lite 16 PoE? 16 Gigabit Ports, 8 with PoE+ Sixteen 1G/100M/10M GbE RJ45 ports — eight of them 802.3at PoE+ delivering up to 32W per port and 45W total — power and connect cameras, Wi-Fi APs, and devices over one cable. Silent Fanless Design A passively cooled, fanless enclosure runs completely silently — perfect for offices, retail counters, studios, and living spaces where noise matters. Full Layer 2 Management VLANs, LACP aggregation, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and more — managed through the UniFi Network application (v7.2.94+). Strong Switching Performance 32 Gbps switching capacity with 16 Gbps non-blocking throughput and a 24 Mpps forwarding rate keep traffic flowing smoothly across all ports. Flexible Mounting A compact 192 x 185 x 44 mm chassis sits neatly on a desktop or mounts to a wall using the included wall-mount kit for clean, out-of-the-way installs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-Lite-16-POE (UniFi Switch Lite 16 PoE) Management Layer 2, Managed — UniFi Network v7.2.94 and later Total Ports 16x Gigabit RJ45 (1G / 100M / 10M) PoE Ports 8x 802.3at PoE+ • up to 32W per port Total PoE Budget 45W Switching Capacity 32 Gbps Non-Blocking Throughput 16 Gbps Forwarding Rate 24 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer 2 Features VLANs, LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN Cooling Fanless (passive) Power Method Universal input, 100–240V AC, 50/60 Hz • internal 60W AC/DC PSU Max Power Consumption 15W (excl. PoE) • 60W (incl. PoE output) Form Factor Compact desktop / wall-mount (kit included) Enclosure Polycarbonate Dimensions / Weight 192 × 185 × 44 mm • 1.2 kg Operating Temperature −15°C to 40°C, 10–90% non-condensing Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Lite-16-POE Datasheet Ubiquiti Installation Guide What's in the Box UniFi Switch Lite 16 PoE USW-Lite-16-POE 16-port Gigabit Layer 2 managed switch with internal power supply. Wall-Mount Kit Mounting bracket and hardware for clean wall installation. Power Cord & Documentation AC power cable and quick-start guide. Not Included Network cables and a UniFi host (for full UniFi Network management) are sold separately. Best For Homes & Studios Silent fanless operation makes it ideal for quiet rooms while powering cameras and APs over PoE+. Offices & Retail 16 Gigabit ports and Layer 2 management for desks, phones, access points, and POS devices. Camera Networks 8x PoE+ ports power UniFi Protect and IP cameras with a 45W budget over a single cable. UniFi Deployments Seamlessly adopted into the UniFi Network app for single-pane management alongside other UniFi gear. Managed through the UniFi Network application (version 7.2.94 and later) via a UniFi host or self-hosted controller. 45W total PoE budget across 8 802.3at PoE+ ports — plan device wattage accordingly. Sits on a desktop or mounts to a wall using the included kit. Fanless and silent — safe to install in living and working spaces. Frequently Asked Questions How many PoE ports does the Lite 16 PoE have? 8 of the 16 Gigabit ports support 802.3at PoE+, with a 45W total PoE budget shared across them. Is this a managed switch? Yes. It's a Layer 2 managed switch with VLANs, LACP, STP/RSTP, IGMP snooping, ACLs and more, configured in the UniFi Network app (v7.2.94+). Does it need a separate UniFi controller? For full management it's adopted into UniFi Network, which can run on a UniFi host (Cloud Gateway, Cloud Key, Dream Machine) or a self-hosted controller. Is it noisy? No. The switch is fanless and completely silent, making it suitable for offices, studios, and living areas. Can it be wall-mounted? Yes. A wall-mount kit is included; it can also sit on a desktop or shelf. Is the USW-Lite-16-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW Flex Mini — 5-Port Managed Gigabit Switch (USW-Flex-Mini) The Ubiquiti UniFi USW Flex Mini is a fully managed, Layer 2 Gigabit switch with five GbE RJ45 ports in an ultra-compact, slim housing. Powered flexibly by 802.3af PoE on Port 1 or by the included 5V USB-C adapter, it's the perfect way to add managed ports anywhere — behind a TV, on a desk, in a comms cabinet, or out at a UniFi camera cluster. Monitor and configure it from anywhere through the intuitive UniFi Network web and mobile app. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Ports 5x GbE RJ45 Power PoE or USB-C Switching Capacity 10 Gbps Management UniFi Network Why Choose the UniFi USW Flex Mini? Five Gigabit Ports, Tiny Footprint Five 10/100/1000 GbE RJ45 ports in a remarkably small, slim chassis — add managed connectivity behind a desk, TV, or AP without taking up rack or shelf space. Powered by PoE or USB-C Run it from an 802.3af PoE source on Port 1 — no separate power outlet needed — or use the included 5V/1A USB-C adapter. Total flexibility for any install location. Fully Managed Layer 2 VLANs, port profiles, and monitoring are all configurable from the UniFi Network controller — enterprise-grade control in a switch that fits in your palm. 10 Gbps Switching Capacity A non-blocking switching capacity of 10 Gbps keeps every port running at full Gigabit speed, with smooth performance across all five connections. Manage From Anywhere Adopt and manage the Flex Mini remotely through the powerful, intuitive UniFi Network web and mobile app — alongside the rest of your UniFi fleet. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-Flex-Mini Switch Type Fully managed, Layer 2 Network Ports (5) GbE RJ45 (10/100/1000 Mbps) PoE Input (1) 802.3af PoE input on Port 1 Power Method 802.3af PoE (Port 1) or included 5V/1A USB-C adapter Max Power Consumption 2.5 W Switching Capacity 10 Gbps Total Non-Blocking Throughput 5 Gbps Forwarding Rate 7 Mpps Management UniFi Network (web & mobile app) Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Tech Specs Ubiquiti Datasheet (PDF) What's in the Box USW Flex Mini Switch The 5-port managed Gigabit switch (single pack). USB-C Power Adapter Included 5V/1A USB-C adapter for non-PoE installations. Documentation Quick start guide and installation instructions. Not Included Ethernet cables and any PoE source are sold separately. Best For Homes & Media Setups Add managed ports behind a TV or desk for consoles, streamers, and smart-home gear. Small Offices Expand a UniFi network with a few extra Gigabit ports — managed from the same controller. Camera & AP Clusters PoE-powered placement out at a camera or access-point group keeps cabling simple. Comms Cabinets A compact managed switch that drops neatly into tight cabinet spaces. Adopt and manage via a UniFi Network host (Cloud Key, Dream Machine, or self-hosted controller). Power from an 802.3af PoE source on Port 1, or use the included 5V USB-C adapter. Fully managed Layer 2 — configure VLANs and port profiles from UniFi Network. Compact, slim housing suits desks, cabinets, and behind-equipment placement. Frequently Asked Questions How is the USW Flex Mini powered? Two ways: by 802.3af PoE on Port 1, or by the included 5V/1A USB-C power adapter. No separate power outlet is needed when using PoE. Is the Flex Mini a managed switch? Yes. It's a fully managed Layer 2 switch — VLANs, port profiles, and monitoring are all configurable through UniFi Network. Does it output PoE to other devices? No. The 802.3af PoE on Port 1 is a power input for the switch itself. The Flex Mini does not supply PoE to connected devices. What do I need to manage it? A UniFi Network host — such as a Cloud Key, a UniFi Dream Machine, or a self-hosted UniFi Network controller. Is the USW Flex Mini NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW Flex Mini is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Pro 24 PoE — Managed 24-Port Gigabit Layer 3 PoE++ Switch (USW-Pro-24-POE) The Ubiquiti UniFi Pro 24 PoE (USW-Pro-24-POE) is an enterprise-grade managed switch with 24 Gigabit RJ45 ports — 16 delivering 802.3af/at PoE+ and 8 delivering high-power 802.3bt PoE++ up to 64 W per port — plus dual 10G SFP+ uplinks and full Layer 3 routing. With a 400 W total PoE budget, an 88 Gbps switching capacity, and a built-in 1.3″ touchscreen, it powers and manages cameras, access points, VoIP phones, and IoT devices from a single pane of glass in UniFi Network. Genuine Ubiquiti stock with fast shipping right across Australia. Ports 24 × Gigabit PoE PoE Budget 400 W Total Uplinks 2 × 10G SFP+ Routing Layer 3 Why Choose the UniFi Pro 24 PoE? 24 Gigabit PoE Ports Sixteen 802.3af/at PoE+ ports plus eight 802.3bt PoE++ ports (up to 64 W each) power cameras, access points, phones, and IoT devices directly — no separate injectors required. 400 W Total PoE Budget A 450 W internal AC/DC power supply delivers a 400 W total PoE budget, comfortably running a mixed fleet of legacy PoE and high-power PoE++ devices at once. Dual 10G SFP+ Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC aggregation to your core network or storage server, with plenty of headroom for surveillance and multi-AP sites. Full Layer 3 Routing Beyond Layer 2 switching, the Pro 24 PoE adds inter-VLAN routing, static routing, DHCP server and DHCP relay — keeping traffic local and fast without a separate router. High-Performance Hardware An 88 Gbps switching capacity, 44 Gbps non-blocking throughput, 65 Mpps forwarding rate, and support for 1,000 VLANs handle demanding enterprise and surveillance LANs with ease. 1.3″ Touchscreen Display A built-in 1.3″ LCM touchscreen shows live status and port information for quick monitoring and troubleshooting right at the rack. Managed by UniFi Network Provision, monitor and configure everything — VLANs, PoE scheduling, LACP, QoS, 802.1X, port mirroring — from the UniFi Network controller or mobile app, no licence fees. Power Redundancy + NDAA A USP-RPS DC backup input guards against PSU failure, while full NDAA Section 889 compliance suits government, defence, and security-sensitive sites. Technical Specifications Model USW-Pro-24-POE (UniFi Pro 24 PoE) RJ45 Ports 24 × Gigabit (10/100/1000) — 16 × 802.3af/at PoE+, 8 × 802.3bt PoE++ SFP+ Uplinks 2 × 1/10G SFP+ Max PoE per Port PoE+ 30 W • PoE++ 64 W Total PoE Budget 400 W Switching Capacity 88 Gbps Non-Blocking Throughput 44 Gbps Forwarding Rate 65 Mpps Layer Layer 3 (inter-VLAN routing, static routing, DHCP server/relay) Supported VLANs 1,000 MAC Address Table 16,000 L2 Features LACP, STP/RSTP, QoS (DSCP), IGMP snooping, 802.1X, port mirroring, jumbo frames, storm control Display 1.3″ LCM touchscreen Power Supply AC/DC internal, 450 W • 100–240 V AC, 50/60 Hz Redundancy USP-RPS DC backup input Max Power Consumption 50 W (excluding PoE output) Form Factor 1U rack mount (brackets included) Enclosure SGCC steel Dimensions / Weight 442 × 285 × 44 mm • 4.3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing Management UniFi Network (v5.10.5 and later) & mobile app Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Pro-24-POE Datasheet Ubiquiti Installation Guide What's in the Box UniFi Pro 24 PoE Switch The USW-Pro-24-POE managed Layer 3 PoE++ switch in its 1U steel chassis. Rackmount Kit Rack-mount brackets and screws for a clean 1U install in any standard rack. Power Cord Mains power cord for the internal 450 W AC/DC power supply. Not Included SFP+ modules/DAC cables and a USP-RPS for power redundancy are sold separately. Best For CCTV & Surveillance Power and manage UniFi Protect cameras over a single cable with plenty of PoE headroom and 10G uplinks to the NVR. Offices & Campuses Drive access points, VoIP phones, and IoT across VLANs with Layer 3 routing keeping traffic local and fast. Smart Buildings High-power 802.3bt PoE++ runs PTZ cameras, displays, and access control without separate power runs. Edge Aggregation Dual 10G SFP+ uplinks aggregate downstream switches into the core for multi-service edge LANs. Adopt and manage through a UniFi Network host — Cloud Gateway, Cloud Key, or UniFi Network self-hosted (v5.10.5+). Mounts in any standard 1U rack space with the included brackets; supports 400–1200 mm rack depth. Use SFP+ DAC or fibre transceivers for 10G uplinks to your core or NVR (sold separately). Add a USP-RPS to the DC backup input for automatic power-supply failover (sold separately). Frequently Asked Questions What PoE standards does the USW-Pro-24-POE support? 16 ports deliver 802.3af/at PoE+ (up to 30 W) and 8 ports deliver 802.3bt PoE++ (up to 64 W), with a 400 W total PoE budget across all ports. Is this a Layer 3 switch? Yes. The Pro 24 PoE supports Layer 3 features including inter-VLAN routing, static routing, and DHCP server/relay, alongside full Layer 2 switching. How do I manage it? It's managed through UniFi Network (version 5.10.5 or later) via the controller or mobile app — no subscription or licence fees. What are the uplink options? Two 1/10G SFP+ ports allow high-speed fibre or DAC aggregation to your core network, storage server, or NVR. Does it support power redundancy? Yes. A USP-RPS DC backup input provides automatic failover if the internal 450 W power supply fails (USP-RPS sold separately). Is the Pro 24 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2) The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x GbE + 2x SFP PoE+ 16 Ports • 95W Switching 52 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-24-POE? 24 Gigabit Ports + 2 SFP Uplinks Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network. 16x 802.3at PoE+ — 95W Total Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability. 52 Gbps Switching Capacity A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks. Silent Fanless Design A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters. 1.3″ Touchscreen Display An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks. Advanced Layer 2 Features Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control. UniFi Network Managed Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-24-POE (UniFi Standard 24 PoE, Gen2) Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port Total PoE Availability 95W Switching Capacity 52 Gbps Non-Blocking Throughput 26 Gbps Forwarding Rate 39 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN Display 1.3″ touchscreen LCM Cooling Fanless (passive) Form Factor Rack mount (1U) Power Method Universal input 100–240V AC, 50/60 Hz Power Supply AC/DC internal, 120W Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output) Management UniFi Network (v7.2.94 and later) Enclosure SGCC steel Dimensions / Weight 442 × 200 × 44 mm • 3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing ESD Protection Air: ±16 kV • Contact: ±12 kV Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-24-POE Datasheet Ubiquiti Installation Guide Best For UniFi Networks Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller. Offices & Studios Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces. Retail & Hospitality Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit. SOHO Racks Compact 1U depth and a touch display suit small server cabinets and comms cupboards. Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host. 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget. Two 1G SFP ports accept fibre or DAC uplinks into your core network. Mounts in a standard 1U rack; fanless design needs no special ventilation. Frequently Asked Questions How many PoE ports does the USW-24-POE have? Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch. Does it require a separate controller? It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees. Is it fanless? Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments. What are the SFP ports for? The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core. Is the USW-24-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UniFi USW-16-POE — 16-Port Gigabit Managed PoE+ Switch (Standard 16 PoE) The Ubiquiti UniFi USW-16-POE (UniFi Standard 16 PoE) is a 16-port Layer 2 managed Gigabit switch with eight PoE+ ports, two 1G SFP uplinks, and a silent fanless design — ideal for powering UniFi access points, cameras, and other PoE devices from a single rack-mounted unit. With a built-in 1.3″ touchscreen display, a 36 Gbps switching capacity, and full UniFi Network integration, it is a clean backbone for homes, offices, and small commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x GbE + 2x SFP PoE 8x PoE+ • 42W Capacity 36 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-16-POE? 16 Gigabit Ports + 2 SFP Uplinks Sixteen GbE RJ45 ports (10/100/1000) plus two 1G SFP uplink slots give you plenty of wired connectivity and fibre-ready uplinks for connecting to a core switch or gateway. 8x PoE+ — 42W Total Budget Eight ports deliver PoE/PoE+ up to 32W per port with a 42W total PoE budget — enough to power UniFi access points, cameras, and other PoE devices over a single cable. Silent Fanless Cooling A passive, fanless cooling system keeps the switch completely silent — perfect for offices, studios, and any space where noise matters. 1.3″ Touchscreen Display An on-device 1.3″ touchscreen shows port status, throughput, and device info at a glance — no need to open a laptop for quick checks. Layer 2 Managed — Full UniFi Control Manage VLANs, LACP, STP/RSTP, port isolation, 802.1X, ACLs, and more through UniFi Network — enterprise switching features in a single pane of glass. 1U Rack Mount — SGCC Steel A rugged SGCC steel 1U enclosure with included rack brackets fits standard server racks and supports 400–1200 mm rack depths. 36 Gbps Switching Capacity With 18 Gbps non-blocking throughput and a 36 Gbps switching capacity, the USW-16-POE handles busy networks without bottlenecks. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-16-POE (UniFi Standard 16 PoE) Networking Interface (16) GbE RJ45 (10/100/1000) • (2) 1G SFP PoE Ports (8) PoE/PoE+ Max. PoE per Port PoE: 15.4W • PoE+: 32W Total PoE Availability 42W Switching Capacity 36 Gbps Non-Blocking Throughput 18 Gbps Forwarding Rate 27 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer Layer 2 managed Display 1.3″ touchscreen (LCM) Power Method Universal input, 100–240V AC, 50/60 Hz Power Supply AC/DC, internal, 60W Max. Power Consumption 18W (excl. PoE) • 60W (incl. PoE output) Cooling Fanless / passive Form Factor Rack mount (1U) Enclosure SGCC steel Dimensions 442 × 200 × 44 mm Weight 2.8 kg (2.9 kg with brackets) Operating Temperature −5°C to 40°C, 10–90% non-condensing Application Requirements UniFi Network 7.2.94 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-16-POE Datasheet USW-16-POE Installation Guide What's in the Box UniFi USW-16-POE Switch The 16-port Standard 16 PoE managed switch with fanless cooling. Rack-Mount Brackets 1U rack-mount brackets and mounting hardware included. Power Cable AC power cable for the internal 60W power supply. Not Included SFP modules and network cables are sold separately. Best For Homes & Studios Silent fanless operation makes it ideal for living spaces, home offices, and recording studios. Offices & SMBs Power UniFi APs and IP phones over PoE+ while managing VLANs and security from UniFi Network. UniFi Camera Sites Run UniFi Protect cameras on PoE+ with a clean rack-mounted backbone. Server Racks 1U SGCC steel chassis with included brackets fits standard 19″ racks. Requires a UniFi Network host (Cloud Gateway, Dream Machine, Cloud Key, or self-hosted) running UniFi Network 7.2.94 or later for full management. Eight PoE+ ports share a 42W total PoE budget — plan device power draw accordingly. Use the two 1G SFP ports for fibre or high-speed copper uplinks to a core switch or gateway. Mounts in a standard 1U rack space using the included SGCC steel brackets. Frequently Asked Questions How much PoE can the USW-16-POE deliver? It has eight PoE/PoE+ ports (up to 32W per port) sharing a 42W total PoE budget. The internal power supply is rated at 60W, which covers both the switch and PoE output. Is the USW-16-POE fanless? Yes. It uses a passive, fanless cooling system for completely silent operation — ideal for offices, studios, and quiet environments. Does it need a UniFi controller? For full management you need a UniFi Network host such as a Cloud Gateway, Dream Machine, or Cloud Key running UniFi Network 7.2.94 or later. What are the SFP ports for? The two 1G SFP ports provide fibre or high-speed copper uplinks to a core switch or gateway. SFP modules are sold separately. Is the USW-16-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-16-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Can I rack-mount it? Yes. It is a 1U rack-mount switch and ships with SGCC steel mounting brackets for standard 19″ racks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-Pro-Max-16-PoE — 16-Port Layer 3 Etherlighting Switch, 2.5 GbE & PoE++ (180W) The Ubiquiti UniFi USW-Pro-Max-16-PoE is a high-performance, fully managed Layer 3 Etherlighting™ switch built for demanding UniFi networks. It pairs 12 Gigabit PoE+ ports with 4 high-speed 2.5 GbE PoE++ ports and 2× 10G SFP+ uplinks, delivering an 84 Gbps switching capacity and a 180 W total PoE budget to power cameras, access points, lighting, and more. Rack-mount, desktop, or wall-mount it anywhere — from advanced home labs to SMB and commercial UniFi deployments across Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 16 + 2 SFP+ PoE Budget 180 W PoE++ Routing Layer 3 Capacity 84 Gbps Why Choose the UniFi USW-Pro-Max-16-PoE? Hybrid 2.5 GbE + Gigabit PoE Twelve 1 GbE PoE+ ports and four 2.5 GbE PoE++ ports let you power and connect high-bandwidth APs, WiFi 7 access points, and cameras without a separate power run. 180 W PoE++ Power Budget Deliver up to 64 W per PoE++ port from a 180 W total budget — enough for PTZ cameras, floodlight cams, UniFi lighting, and high-power access points. True Layer 3 Switching On-board inter-VLAN routing, static routes, DHCP server, and DHCP relay move routing to the switch — ideal for segmented, enterprise-grade UniFi networks. Dual 10G SFP+ Uplinks Two 10G SFP+ ports provide high-speed fibre or DAC uplinks to your gateway or aggregation switch, with an 84 Gbps switching capacity and 62 Mpps forwarding rate. Etherlighting™ & LCM Touchscreen Per-port Etherlighting™ RGB indicators visualise link speed and status, while a 1.3″ touchscreen shows live stats — making troubleshooting fast and intuitive. Flexible Mounting Deploy it your way — 1U rack mount, desktop, or wall mount — with a compact SGCC steel chassis that fits home labs and commercial racks alike. Pro AV & Advanced L2 Features Built-in Pro AV profiles (Dante, Q-SYS, NDI, SDVoE, AES67), LACP, QoS, 802.1X, IGMP snooping, ACLs, and storm control for serious networks. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Pro-Max-16-PoE Total Ports 12× 1 GbE RJ45 (PoE+) • 4× 2.5 GbE RJ45 (PoE++) • 2× 10G SFP+ Max. PoE Output Up to PoE++ • 64 W per PoE++ port Total PoE Availability 180 W Switching Capacity 84 Gbps Non-Blocking Throughput 42 Gbps Forwarding Rate 62 Mpps Layer Layer 3 (inter-VLAN routing, static routes, DHCP server & relay) VLANs / MAC Table 1,000 VLANs • 16,000 MAC addresses • 256 IPv4 static routes Display 1.3″ touchscreen LCM • Etherlighting™ (Ethernet & SFP+) Form Factor Rack mount (1U), desktop, wall Management UniFi Network (v8.1.127 and later) Power Method AC adapter (external 210 W AC/DC) • 50–54 V DC Power Consumption 25 W (excl. PoE) • 210 W (incl. PoE output) Enclosure SGCC steel Dimensions / Weight 325.1 × 160 × 43.7 mm • 2.1 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Pro-Max-16-PoE Datasheet Installation Guide What's in the Box USW-Pro-Max-16-PoE Switch 16-port Layer 3 Etherlighting™ PoE++ switch with 2× 10G SFP+ uplinks. External 210 W Power Supply AC/DC power adapter and AC power cable included. Mounting Hardware Rack-mount ears and wall-mount accessories with screws. Not Included SFP+ modules/DAC cables and network cabling are sold separately. Best For SMB & Office Networks Layer 3 routing and 180 W PoE power APs, phones, and cameras from one managed switch. UniFi Camera Sites PoE++ headroom drives PTZ, floodlight, and AI cameras with bandwidth to spare. WiFi 7 Deployments 2.5 GbE PoE++ ports feed high-throughput WiFi 7 access points without bottlenecks. Advanced Home Labs Dual 10G SFP+ uplinks and 84 Gbps capacity suit prosumer and home-lab racks. Requires UniFi Network application v8.1.127 or later, hosted on a UniFi gateway, Cloud Key, or self-hosted controller. Mounts to a 1U rack, desktop, or wall — supported rack depth 400–1200 mm. Use the 4× 2.5 GbE PoE++ ports for WiFi 7 APs and high-power devices; 12× Gigabit PoE+ ports for general endpoints. Add SFP+ modules or DAC cables for 10G uplinks to your gateway or aggregation switch. Frequently Asked Questions How many ports are PoE and what's the power budget? All 16 RJ45 ports deliver PoE — 12 are Gigabit PoE+ and 4 are 2.5 GbE PoE++ (up to 64 W each), sharing a 180 W total PoE budget. Does it support Layer 3 routing? Yes. The USW-Pro-Max-16-PoE supports inter-VLAN routing, static routes, a local DHCP server, and DHCP relay for enterprise-grade segmentation. What uplinks does it have? Two 10G SFP+ ports for high-speed fibre or DAC uplinks, with an 84 Gbps switching capacity and 62 Mpps forwarding rate. How is it managed? Via the UniFi Network application (v8.1.127 or later) on a UniFi gateway, Cloud Key, or self-hosted controller — with a built-in 1.3″ touchscreen for live stats. Can I mount it on a wall or desktop? Yes. It supports 1U rack mount, desktop, and wall mount, with mounting hardware included in the box. Is the USW-Pro-Max-16-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch The Ubiquiti UniFi Switch Flex (USW-Flex) is a compact, weatherproof 5-port Layer 2 managed Gigabit switch built to extend your network and PoE devices to places a normal switch can't go. It draws all its power over a single PoE++ uplink, then redistributes up to 46 W of PoE+ across four ports — perfect for powering UniFi cameras, access points, and IoT devices outdoors or in tight spaces. Fully managed through the UniFi Network application, it's ideal for homes, offices, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5 × GbE PoE Budget 46 W PoE+ Build Outdoor-Ready Management UniFi Network Why Choose the UniFi Switch Flex? Powered Entirely Over PoE++ No power brick at the switch — the USW-Flex is powered by a single PoE++ uplink or a 60 W PoE adapter, so you can place it almost anywhere a network cable reaches. 46 W of PoE+ Output When fed by a PoE++ source, four GbE ports deliver up to 46 W total (25 W max per port), enough to run UniFi cameras, access points, and other PoE devices downstream. Outdoor-Ready Design A rugged polycarbonate enclosure operates from −40°C to 65°C and 5–95% humidity, making it suitable for sheltered outdoor and demanding Australian environments. Full Layer 2 Management VLANs, port isolation, port mirroring, flow control, jumbo frames, and egress rate limiting — all configured through the UniFi Network application with no per-device licensing. Flexible Mounting Compact 122.5 × 107.1 mm form factor mounts on a desk, wall, or pole, letting you bring switching and PoE exactly where it's needed. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex Networking Interface (5) GbE RJ45 ports (1G / 100M / 10M) PoE Ports 4 × PoE+ output • 1 × PoE++ input Total Available PoE 46 W (PoE++ / 60 W adapter input) • 20 W (PoE+ input) • 8 W (PoE input) Max. PoE per Port 25 W (PoE+) Switching Capacity 10 Gbps Non-Blocking Throughput 5 Gbps Forwarding Rate 7 Mpps Supported VLANs 1,000 MAC Address Table 2,000 Layer 2 Features Egress rate limit, flow control, port isolation, port mirroring, jumbo frames Power Method PoE++ • 50–57V DC supported range Max. Power Consumption 5 W (excluding PoE output) Management UniFi Network application (Version 5.10.3 and later) Enclosure Polycarbonate • outdoor-ready Mounting Compact desktop, wall, pole ESD Protection Air / contact: ±16 kV Operating Temperature −40°C to 55°C (46 W PoE) • −40°C to 65°C (25 W PoE) Operating Humidity 5 to 95% non-condensing Dimensions / Weight 122.5 × 107.1 × 28 mm • 230 g Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Flex Datasheet Ubiquiti Installation Guide What's in the Box UniFi Switch Flex (USW-Flex) The 5-port outdoor-ready managed PoE++ switch. Mounting Hardware Brackets and screws for desk, wall, or pole installation. Documentation Quick-start guide and installation instructions. Not Included A PoE++ switch or 60 W PoE adapter is required to power the unit and unlock the full 46 W PoE budget (sold separately). Best For Outdoor Camera Clusters Power and connect several UniFi cameras from one PoE++ uplink at the far end of a run. Remote Access Points Extend wired backhaul and PoE to APs in sheds, gates, and outbuildings. Desk & Edge Expansion Add managed ports to a desk or AV rack without running a new power circuit. IoT & Smart Sites Segment and power IoT devices with VLANs and port isolation on the network edge. Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application 5.10.3 or later. Power the switch with a PoE++ source or 60 W PoE adapter to access the full 46 W downstream PoE budget. Lower-power inputs still work: PoE+ input gives 20 W and standard PoE input gives 8 W of downstream PoE. Mounts to desk, wall, or pole; suited to sheltered outdoor placements within its rated temperature range. Frequently Asked Questions How is the USW-Flex powered? Entirely over its PoE input port. Use a PoE++ switch or a 60 W PoE adapter to get the full 46 W of downstream PoE; PoE+ and standard PoE inputs work too, with smaller budgets. How much PoE can it deliver to my devices? Up to 46 W total across four PoE+ ports (25 W max per port) when fed by a PoE++ source — enough for UniFi cameras, access points, and IoT devices. Can it be used outdoors in Australia? Yes. It's outdoor-ready with a polycarbonate enclosure rated from −40°C to 65°C and 5–95% humidity, suiting sheltered outdoor and harsh Australian conditions. Do I need a controller to manage it? Yes. The USW-Flex is managed through the UniFi Network application running on a UniFi Cloud Gateway, Dream Machine, or Cloud Key — there are no per-device licence fees. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW Flex Mini (3-Pack) — Managed 5-Port Gigabit Switch (USW-Flex-Mini-3) The Ubiquiti UniFi USW Flex Mini is a fully managed, Layer 2 Gigabit switch in a palm-sized desktop housing — and this 3-pack (USW-Flex-Mini-3) is the cost-effective way to add managed connectivity to multiple rooms, desks, or AV racks at once. Each switch packs five Gigabit RJ45 ports (one accepting 802.3af/at PoE input) into a near-silent fanless body, and every unit is provisioned and monitored from the UniFi Network app and web interface. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it is ideal for expanding any UniFi network across homes, offices, and commercial sites anywhere in Australia. Ports 5x GbE RJ45 Power PoE or USB-C Switching 10 Gbps L2 Pack 3 Switches Why Choose the UniFi USW Flex Mini 3-Pack? Three Managed Switches, One Value Pack Get three USW Flex Mini switches in a single box — the economical way to extend Gigabit connectivity to multiple desks, rooms, or AV positions across a home, office, or commercial fit-out. Five Gigabit RJ45 Ports Each switch delivers 5x 10/100/1000 RJ45 ports, with Port 1 accepting 802.3af/at PoE input — turn a single uplink into five wired connections for printers, NAS, consoles, and computers. Flexible PoE or USB-C Power Power each unit over a single PoE cable (802.3af/at) or via a 5V/1A USB-C adapter — no dedicated power run required. Maximum draw is just 2.5 W per switch. Fully Managed Layer 2 Configure port-based VLANs, port isolation, port mirroring, storm control, jumbo frames, and rate limiting — all from the UniFi Network controller, with up to 1,000 VLANs supported. Compact, Silent Desktop Design At just 107 x 70 x 21 mm and 150 g, each fanless switch tucks discreetly behind a TV, on a desk, or inside a cabinet — silent operation with no moving parts. UniFi Network — One Interface Provision, monitor, and manage all three switches alongside your other UniFi gear through the UniFi Network app and web interface — single-pane-of-glass control with no per-device fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex-Mini (3-Pack: USW-Flex-Mini-3) Switch Type Fully managed, Layer 2 Ports (5) 10/100/1000 GbE RJ45 • Port 1 supports 802.3af/at PoE input Switching Capacity 10 Gbps Non-Blocking Throughput 5 Gbps Forwarding Rate 7.44 Mpps Supported VLANs 1,000 (port-based) MAC Address Table 2,000 Layer 2 Features Port isolation, port mirroring, storm control, flow control, egress rate limit, multicast/broadcast rate limiting, jumbo frames Power Method USB Type-C (5V, 1A) or 802.3af/at PoE (44–57 V DC) Max Power Consumption 2.5 W per switch Management UniFi Network (Ethernet in-band) Enclosure Polycarbonate Dimensions 107 × 70 × 21 mm Weight 150 g per switch ESD/EMP Protection Air: ±16 kV • Contact: ±12 kV Operating Temperature −5°C to 45°C Operating Humidity 10–90% non-condensing Software Requirement UniFi Network 5.12.5 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Tech Specs Ubiquiti Installation Guide What's in the Box 3x UniFi USW Flex Mini Switch Three fully managed 5-port Gigabit switches (USW-Flex-Mini). Mounting Hardware Wall-mount accessories and screws included per switch. Quick Start Guide Installation and setup documentation. No USB-C Adapter The 5V/1A USB-C power adapter is included only with the single-pack. In this 3-pack, power each switch via 802.3af/at PoE (adapters sold separately). Best For Homes & Home Offices Add wired ports for consoles, smart TVs, NAS, and PCs in multiple rooms without running new power. Desks & Workstations Drop a managed switch at each desk to fan one cable out to phone, PC, and dock. AV & Meeting Rooms Discreet PoE-powered switching behind displays, projectors, and conferencing kit. UniFi Network Expansion Extend an existing UniFi deployment to three new locations with single-pane management. Adopt and manage each switch through the UniFi Network app or web interface (UniFi Network 5.12.5+). Power each unit via 802.3af/at PoE on Port 1, or a 5V/1A USB-C adapter (not included in the 3-pack). Uses port-based VLANs; does not support SSH, STP forwarding control, or 802.1X. Best paired with a UniFi gateway or PoE switch for end-to-end UniFi management. Frequently Asked Questions How many switches come in this pack? Three. The USW-Flex-Mini-3 includes three individual USW Flex Mini managed 5-port Gigabit switches. Does the 3-pack include USB-C power adapters? No. The 5V/1A USB-C adapter ships only with the single-pack. In this 3-pack, power each switch via 802.3af/at PoE, or buy USB-C adapters separately. Is the USW Flex Mini a managed switch? Yes. It is a fully managed Layer 2 switch with port-based VLANs, port isolation, mirroring, storm control, and jumbo frames, all configured in UniFi Network. Does it provide PoE output to other devices? No. Port 1 accepts PoE input to power the switch itself. The Flex Mini does not output PoE to connected devices. Do I need a UniFi controller? To manage features you run UniFi Network on a UniFi gateway, Cloud Key, or hosted controller. The switch will pass traffic unmanaged but needs the controller for configuration. Is the USW Flex Mini NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW Flex Mini is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-Pro-Aggregation — 28x 10G SFP+ & 4x 25G SFP28 Layer 3 Switch The UniFi USW-Pro-Aggregation is a fully managed, rack-mountable Layer 3 aggregation switch built to be the high-bandwidth fibre core of a UniFi network. With (28) 10G SFP+ ports, (4) 25G SFP28 ports, and a massive 760 Gbps switching capacity, it ties together your switches, servers, and uplinks with room to grow. A 1.3″ LCM colour touchscreen surfaces key system and connection insights at a glance, while DC power-backup support (via USP-RPS, sold separately) adds resilience for mission-critical sites. Configure and monitor it from anywhere with the UniFi Network web and mobile app. Genuine Ubiquiti stock with fast Australia-wide shipping. 10G SFP+ 28 Ports 25G SFP28 4 Ports Switching 760 Gbps Routing Layer 3 Why Choose the UniFi USW-Pro-Aggregation? High-Density 10G Fibre Aggregation Twenty-eight 1/10 Gbps SFP+ ports give you the density to aggregate access switches, NVRs, servers, and uplinks across an entire site from a single 1U chassis. 25G SFP28 Uplinks Four 1/10/25 Gbps SFP28 ports deliver ultra-fast uplinks to your core or data centre, future-proofing the network well beyond 10G. 760 Gbps Non-Blocking Backbone A 760 Gbps switching capacity, 380 Gbps non-blocking throughput, and 565.44 Mpps forwarding rate move heavy traffic without bottlenecks. Full Layer 3 Switching Inter-VLAN routing, static routing, a local DHCP server, and DHCP relay let the switch route between networks — no separate router needed at the aggregation layer. 1.3″ LCM Touchscreen An on-device 1.3″ colour touchscreen with AR switch management shows live system and port status for quick diagnosis right at the rack. Redundant DC Power Backup A dedicated USP-RPS DC input keeps the switch running on backup power if the internal PSU fails (USP-RPS sold separately) — ideal for critical infrastructure. Managed by UniFi Network Configure, monitor, and update from anywhere through the powerful UniFi Network web app and mobile app — one pane of glass for your whole network. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-Pro-Aggregation Networking Interfaces (28) 1/10 Gbps SFP+ • (4) 1/10/25 Gbps SFP28 Switching Capacity 760 Gbps Total Non-Blocking Throughput 380 Gbps Forwarding Rate 565.44 Mpps Layer Layer 3 (SMB Layer 3 10/25 G Fibre Switch) Supported VLANs 1,000 MAC Address Table 32,000 IPv4 Static Routes 256 Packet Buffer 4 MB LCM Display 1.3″ touchscreen (AR switch management) Power Method (1) Universal AC input, 100–240V AC, 2A max, 50/60 Hz • (1) USP-RPS DC input, 11.5V DC, 8.7A Power Supply AC/DC, internal, 100W Max. Power Consumption 100W Heat Dissipation 341 BTU/hr Management Ethernet in-band • UniFi Network ESD/EMP Protection Air: ± 16kV • Contact: ± 12kV Form Factor Rack mount (1U) • rack depth 400–1200 mm Enclosure SGCC steel Dimensions / Weight 442 × 325 × 44 mm • 4.6 kg (4.7 kg with brackets) Operating Temperature −5 to 40°C, 10–90% non-condensing Software Requirements UniFi Network 6.1.25 and later Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Note: The four SFP28 ports do not support mixed speed at 25 Gbps mode — once one SFP28 port is set to 25 Gbps, the others are limited to 25 Gbps too. Mixed speed is only supported when all SFP28 ports run at 1 Gbps or 10 Gbps. Downloads & Resources USW-Pro-Aggregation Tech Specs Datasheet (PDF) Installation Guide What's in the Box USW-Pro-Aggregation Switch UniFi Pro Aggregation Layer 3 fibre switch (1U rack-mountable). Rack Mounting Kit SGCC steel mounting brackets and hardware for 400–1200 mm rack depths. Power Cable AC power cable for the internal 100W universal power supply. Not Included SFP+/SFP28 transceivers and a USP-RPS for redundant DC power are sold separately. Best For Network Core & Aggregation Aggregate dozens of 10G fibre links into one high-capacity, manageable backbone. Large CCTV & UniFi Sites Feed multiple NVRs and access switches with 10G headroom and Layer 3 routing. Server & Storage Links 25G SFP28 uplinks connect servers, SANs, and data-centre cores at high speed. Mission-Critical Infrastructure USP-RPS DC backup keeps the aggregation layer online through PSU failures. Requires UniFi Network 6.1.25 or later for adoption and management. Populate ports with Ubiquiti SFP+ (10G) and SFP28 (25G) transceivers, sold separately. Add a USP-RPS (sold separately) via the DC input for redundant power backup. 1U rack-mountable with included SGCC steel brackets for 400–1200 mm rack depths. Frequently Asked Questions What is the USW-Pro-Aggregation used for? It is a Layer 3 aggregation switch that consolidates many 10G fibre links into a high-capacity backbone, with 25G SFP28 uplinks to the core — ideal as the fibre heart of a UniFi network. Does it support Layer 3 routing? Yes. It supports inter-VLAN routing, static routing, a local DHCP server, and DHCP relay, so it can route between networks at the aggregation layer. Does it come with SFP modules? No. SFP+ (10G) and SFP28 (25G) transceivers are sold separately so you can match the right optics or DAC cables to your runs. Can I add redundant power? Yes. A USP-RPS (sold separately) connects to the DC input and keeps the switch running if the internal PSU fails. Can the four 25G ports run at mixed speeds? Once any SFP28 port is set to 25 Gbps, all four are limited to 25 Gbps. Mixed speed is only supported when all SFP28 ports run at 1 Gbps or 10 Gbps. Is the USW-Pro-Aggregation NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Flex 2.5G PoE — 8-Port 2.5GbE PoE++ Managed Switch (USW-Flex-2.5G-8-PoE) The UniFi Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) is a compact, fanless Layer 2 managed switch built for high-performance multi-gigabit networks. It delivers eight 2.5 GbE RJ45 ports — all PoE++ capable — plus a 10 GbE RJ45/SFP+ combination uplink, so you can power and connect access points, cameras, and IP phones from a single silent unit. Powered by a PoE+++ uplink or the optional 210W AC adapter, and managed entirely through UniFi Network with no monthly fees, it suits homes, offices, retail, and smart-building sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 8 × 2.5GbE PoE PoE++ on All Ports Uplink 10G RJ45 / SFP+ Cooling Fanless / Silent Why Choose the UniFi Flex 2.5G PoE? 8 × 2.5 GbE PoE++ Ports Every one of the eight 2.5 GbE RJ45 ports supports PoE++ (up to 64W per port by PSE) — ready to power Wi-Fi 7 access points, cameras, and multi-gig devices without a separate injector. 10 GbE Combination Uplink A flexible 10 GbE RJ45 / 10G SFP+ combo uplink gives you a fast, future-proof link back to your core network over copper or fibre. Flexible Powering Run it from the included-capable 210W AC adapter (excluded) for up to 196W of PoE, or power the entire switch from a single PoE+++ uplink for compact, cable-light deployments. Fanless, Silent Operation A passively cooled polycarbonate chassis runs completely silently — ideal for studios, meeting rooms, retail counters, and other noise-sensitive spaces. Versatile Mounting Compact desktop form factor with wall, DIN-rail, and magnetic mounting options, so it fits neatly into cabinets, comms cupboards, and tight installs. UniFi Network — No Subscription Fully managed through the UniFi Network application with VLANs, port mirroring, storm control, and more — local control with no monthly fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex-2.5G-8-PoE (UniFi Flex 2.5G PoE) 2.5 GbE RJ45 Ports 8 (all PoE++) — 2.5G / 1G / 100M / 10M 10 GbE RJ45 Uplink 1 (PoE+++ input) — 10G / 5G / 2.5G / 1G / 100M 10G SFP+ Uplink 1 — 10G / 1G Max. PoE Output Up to PoE++ (64W per port by PSE) Total PoE Availability 210W AC adapter: 196W • PoE+++ input: 76W • PoE++ input: 46W • PoE+ input: 16W Switching Capacity 60 Gbps Non-Blocking Throughput 30 Gbps Forwarding Rate 45 Mpps VLANs / MAC Table 256 VLANs • 4,000 MAC addresses Layer 2 Features STP & RSTP, egress rate limit, flow control, storm control, port isolation, port mirroring, jumbo frames, loop protection Power Method (1) AC/DC adapter (excluded) • (1) PoE+++ Supported Voltage 50–57V DC / PoE Max. Power Consumption 14W (PoE input, excl. PoE output) • 210W including PoE output Cooling Fanless (silent) Management UniFi Network 9.0.114 and later Mounting Compact desktop, wall, DIN, magnetic Enclosure Polycarbonate Dimensions / Weight 212.9 × 99.4 × 33.5 mm • 567 g Operating Temperature −20°C to 45°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Flex-2.5G-8-PoE Tech Specs Ubiquiti Installation Guide Best For Homes & Smart Spaces Multi-gig speed to power Wi-Fi 7 APs and cameras from one silent, compact switch. Offices & Retail PoE++ on every port for phones, APs, and displays with a fast 10G uplink to the core. Comms Cabinets Wall, DIN-rail, and magnetic mounting fit neatly into tight racks and cupboards. PoE-Powered Installs Run the whole switch from a single PoE+++ uplink for cable-light deployments. Adopt and manage with the UniFi Network application (version 9.0.114 or later) on a UniFi Gateway, Cloud Key, or self-hosted controller. Power from the optional 210W AC adapter (excluded) for up to 196W of PoE, or from an upstream PoE+++ source via the 10 GbE uplink. Use the 10 GbE RJ45 or 10G SFP+ combo uplink for a high-speed link back to your aggregation switch or gateway. Mounts to desk, wall, DIN-rail, or magnetic surface out of the box. Frequently Asked Questions How many PoE ports does it have? All eight 2.5 GbE RJ45 ports support PoE++, delivering up to 64W per port (by PSE) for power-hungry access points and cameras. Does it include a power adapter? The 210W AC adapter is sold separately. You can also power the entire switch from a single PoE+++ uplink connection. What uplink options are available? A combination 10 GbE RJ45 / 10G SFP+ uplink lets you connect over copper or fibre at up to 10 Gbps. Do I need a subscription to manage it? No. It is managed through the UniFi Network application with no monthly fees — full local control. Is the Flex 2.5G PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Pro Max 48 — 48-Port Layer 3 Etherlighting Switch (USW-Pro-Max-48) The Ubiquiti UniFi Pro Max 48 (USW-Pro-Max-48) is a 48-port, Layer 3 Etherlighting™ managed switch built for high-performance UniFi networks. It combines 16 multi-gigabit 2.5 GbE ports, 32 GbE RJ45 ports, and 4 x 10G SFP+ uplinks with 112 Gbps of non-blocking throughput and full inter-VLAN routing. Whether you're powering a busy office, retail site, warehouse, or commercial install anywhere in Australia, the Pro Max 48 delivers enterprise-grade switching with simple UniFi Network management, a built-in 1.3″ touchscreen, and DC power-backup readiness. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48 + 4 SFP+ Throughput 112 Gbps Routing Layer 3 Form Factor 1U Rack Why Choose the UniFi Pro Max 48? Multi-Gigabit 2.5 GbE Ports Sixteen 2.5 GbE RJ45 ports give WiFi 7 access points, NAS devices, and high-speed clients the headroom they need, while 32 standard GbE ports cover the rest of your network. 112 Gbps Non-Blocking Throughput With 224 Gbps switching capacity, 112 Gbps non-blocking throughput, and a 167 Mpps forwarding rate, the Pro Max 48 handles demanding, high-density networks without bottlenecks. Layer 3 Routing Built In On-switch inter-VLAN routing, static routing, DHCP server, and DHCP relay keep traffic local and fast, reducing load on your gateway across multiple networks. 4 x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth fibre or DAC uplinks to your core, aggregation layer, or other UniFi switches for a future-proof backbone. Etherlighting™ & Touchscreen Etherlighting™ ports illuminate to show location, speed/link, and native VLAN, while a 1.3″ touchscreen displays live status at a glance — pair with UniFi Etherlighting Patch Cables for optimal brightness. DC Power Backup Ready A dedicated USP RPS DC input lets you add redundant power for critical infrastructure, keeping the switch online through mains interruptions. Pro AV & Advanced L2 Built-in Pro AV profiles (Dante, Q-SYS, NDI, SDVoE, AES67, Crestron), LACP aggregation, QoS, 802.1X, jumbo frames, and advanced IGMP make it ideal for AV-over-IP and enterprise deployments. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model USW-Pro-Max-48 Networking Interface (32) GbE RJ45 • (16) 1/2.5 GbE RJ45 • (4) 10G SFP+ Switching Capacity 224 Gbps Total Non-Blocking Throughput 112 Gbps Forwarding Rate 167 Mpps Management Layer 3 • Ethernet Supported VLANs 1,000 MAC Address Table 32,000 L3 Table Size 12,000 ARP entries • 12,000 IPv4 routes • 256 static routes Packet Buffer 2 MB Redundancy DC power backup (USP RPS DC input) Form Factor Rack mount (1U) Display 1.3″ touchscreen (LCM) Power Method (1) Universal input, 100–240V AC, 50/60 Hz • (1) USP RPS DC input Power Supply AC/DC, internal, 100W Max. Power Consumption 100W Heat Dissipation 341.2 BTU/hr Enclosure / Mount Material SGCC steel Supported Rack Depth 400–1200 mm (15.7–47.2″) Dimensions 442 × 325 × 44 mm (17.4 × 12.8 × 1.7″) Weight 4.8 kg (4.9 kg with brackets) Operating Temperature −5 to 40°C, 10–90% non-condensing Etherlighting™ Ethernet & SFP+ (locating, speed/link, native VLAN) Application Requirements UniFi Network 8.0.24 and later Certifications CE, FCC, IC, Anatel: 06373-24-08356 Compliance NDAA compliant Downloads & Resources USW-Pro-Max-48 Datasheet Installation Guide Best For Offices & Enterprise High port density with multi-gig 2.5 GbE for WiFi 7 APs and fast desktops across busy floors. Warehouses & Sites Layer 3 routing keeps traffic local and 10G SFP+ uplinks tie distributed switches together. Pro AV Installs Built-in Pro AV profiles for Dante, NDI, Q-SYS and SDVoE make AV-over-IP simple and reliable. Data & Rack Rooms 1U rack form factor with DC backup readiness and a touchscreen for critical infrastructure. Managed with UniFi Network 8.0.24 or later via a UniFi gateway, Cloud Key, or self-hosted controller. Mounts in a standard 1U rack; supports rack depths from 400–1200 mm. Powered by universal 100–240V AC; add a USP RPS DC input for redundant power. Pair with UniFi Etherlighting Patch Cables for optimal port-illumination brightness. Frequently Asked Questions Is the USW-Pro-Max-48 a PoE switch? No. The Pro Max 48 is a non-PoE Layer 3 switch. If you need to power PoE devices, use UniFi PoE switches or PoE injectors alongside it. Does it support Layer 3 routing? Yes. It offers inter-VLAN routing, static routing, a local DHCP server, and DHCP relay across networks managed on the switch. How many multi-gigabit ports does it have? It includes 16 x 2.5 GbE RJ45 ports, 32 x GbE RJ45 ports, and 4 x 10G SFP+ uplink ports. What controller version do I need? UniFi Network version 8.0.24 or later is required to manage the Pro Max 48. Can I add power redundancy? Yes. The switch is DC power backup ready via a USP RPS DC input for resilient, always-on infrastructure. Is the Pro Max 48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-Max-48 is NDAA Section 889 compliant. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant UniFi Switch Enterprise XG 24 — 24-Port 10GbE Managed Layer 3 Switch (USW-EnterpriseXG-24) The UniFi Switch Enterprise XG 24 (USW-EnterpriseXG-24) is a fully managed, multi-gigabit Layer 3 switch built for high-throughput networks. It packs 24 × 10GbE RJ45 ports plus 2 × 25G SFP28 uplinks, a built-in 1.3″ LCM colour touchscreen with AR switch management, and optional redundant-power support. Whether you're wiring a data closet, AV studio, server room, or high-density office anywhere in Australia, it delivers enterprise performance under the intuitive UniFi Network app — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 24 × 10GbE RJ45 Uplinks 2 × 25G SFP28 Display 1.3″ Touchscreen Switching Managed Layer 3 Why Choose the UniFi Switch Enterprise XG 24? 24 × 10GbE RJ45 Ports Deliver 10 Gigabit connectivity over standard copper to servers, NAS units, workstations, and high-throughput access layers — no fibre runs required to reach 10G speeds. 2 × 25G SFP28 Uplinks High-bandwidth 25 Gigabit SFP28 uplinks aggregate traffic to your core or aggregation layer, keeping the network fast and congestion-free as it scales. Managed Layer 3 Switching Full Layer 3 routing and switching features let the Enterprise XG 24 route between VLANs and segments on its own, reducing load on upstream gateways. 1.3″ LCM Colour Touchscreen An onboard 1.3″ colour touchscreen with AR switch management surfaces key system and connection insights at a glance — right at the rack. Redundant Power Ready A dedicated USP RPS DC input adds power-supply failure protection when paired with the UniFi SmartPower Redundant Power System (sold separately) for mission-critical uptime. Tidy Single-Row Cabling A single-row RJ45 port layout lines up cleanly with patch panels, making cable management and servicing in dense racks far simpler. UniFi Network Management Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app — one pane of glass for your entire UniFi stack. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is mandatory. Technical Specifications Model USW-EnterpriseXG-24 (UniFi Switch Enterprise XG 24) Switching Layer Managed Layer 3 RJ45 Ports (24) 10GbE RJ45 SFP Ports (2) 25G SFP28 (uplinks) Display (1) 1.3″ LCM colour touchscreen with AR switch management Redundant Power (1) USP RPS DC input (USP RPS sold separately) Port Layout Single-row RJ45 for easy patch-panel cable management Management UniFi Network web application & mobile app Compliance NDAA compliant Downloads & Resources USW-EnterpriseXG-24 Datasheet Installation Guide What's in the Box UniFi Switch Enterprise XG 24 The USW-EnterpriseXG-24 managed Layer 3 switch. Mounting Hardware Rack-mount kit and screws for standard 19″ racks. Power Cable AC power cord for connection to mains. Not Included SFP28 transceivers, DAC cables, and the USP RPS redundant power system are sold separately. Best For Server Rooms & Data Closets 10GbE copper to every server and NAS with 25G uplinks back to the core for high throughput. AV & Production Studios High-bandwidth, low-latency switching for media editing, NDI, and large file transfers. High-Density Offices Layer 3 routing between VLANs keeps a busy corporate network fast and segmented. Aggregation Layer Acts as a powerful distribution switch feeding access-layer UniFi switches over 25G. Adopt and manage with the UniFi Network application running on a UniFi gateway, Cloud Key, or self-hosted host. Mounts in a standard 19″ rack; align the single-row RJ45 ports with your patch panel for clean cabling. Add a USP RPS via the DC input for power-supply redundancy on critical deployments. Populate the 25G SFP28 ports with Ubiquiti SFP28 transceivers or DAC cables for uplinks (sold separately). Frequently Asked Questions Is the Enterprise XG 24 a Layer 3 switch? Yes. The USW-EnterpriseXG-24 is a fully managed Layer 3 switch, so it can route between VLANs and network segments without relying solely on an upstream gateway. Do the 10GbE ports work over standard copper cabling? Yes. All 24 RJ45 ports deliver 10GbE over copper, so you can reach 10 Gigabit speeds without running fibre to each device. What are the 25G SFP28 ports for? The two 25G SFP28 ports are designed as uplinks to aggregate traffic back to your core or aggregation layer. Transceivers and DAC cables are sold separately. Can I add redundant power? Yes. The switch has a USP RPS DC input for enhanced power-supply failure protection when connected to the UniFi SmartPower Redundant Power System (sold separately). How is it managed? Through the UniFi Network web application and mobile app, plus the onboard 1.3″ colour touchscreen with AR switch management for at-the-rack insights. Is the Enterprise XG 24 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless design. The touchscreen displays the current switch state and information for quick diagnosis. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24 switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operating mode (switching, mirroring, or aggregate) per port.Features: (24) Gigabit Ethernet Ports (2) Gigabit SFP Ports 1.3" color touchscreen for status information Managed by UniFi Network Controller Product Specifications USW-24 Dimensions 442.4 x 200 x 43.7 mm (17.42 x 7.87 x 1.72") Weight With Rackmount Brackets 2.70 kg (5.95 lb) 2.79 kg (6.15 lb) Interfaces 0 Interfaces Networking Management (24) 10/100/1000 RJ45 Ports (2) 1G SFP Ethernet Ports Ethernet In-Band Power Method 100-240VAC, 50/60 Hz, Universal Input Power Supply AC/DC, Internal, 36W Supported Voltage Range 100 to 240VAC Max. Power Consumption 25W LEDs RJ45 Data Ports SFP Data Ports Speed/Link/Activity Link/Activity ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 45° C (23 to 113° F) Operating Humidity 10 to 90% Noncondensing Certifications CE, FCC, IC

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex XG — 4-Port 10GbE Managed Layer 2 Switch (USW-Flex-XG) The UniFi Switch Flex XG (USW-Flex-XG) is a fully managed, multi-gigabit Layer 2 switch with four 10GbE RJ45 ports and a single GbE 802.3at PoE+ input — perfect for high-throughput links to NAS units, servers, NVRs, and 10G uplinks. Its slim, fanless housing sits neatly on a desktop, and the whole switch is managed from anywhere through the powerful UniFi Network web app and mobile app. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. 10GbE Ports 4 × RJ45 Power Input GbE PoE+ (802.3at) Management Managed L2 Design Fanless & Slim Why Choose the UniFi Switch Flex XG? Four 10GbE RJ45 Ports Four full 10 Gigabit RJ45 ports deliver the bandwidth heavy workloads demand — ideal for NAS, servers, high-resolution NVRs, editing workstations, and 10G uplinks over standard copper cabling. GbE PoE+ Input A single GbE 802.3at PoE+ RJ45 input can power the switch directly from an upstream PoE+ source, simplifying installs where a nearby power outlet isn’t available. Fully Managed Layer 2 Configure VLANs, monitor traffic, and manage the switch from anywhere through the intuitive UniFi Network web application and mobile app — full control from a single pane of glass. Compact, Fanless Housing A slim, silent fanless design sits neatly on a desktop or shelf. Keep the surface clear and never stack other hardware on top — unobstructed airflow keeps it cool and reliable. Flexible Powering Options Power the USW-Flex-XG from a PoE+ input or a 5 V, 5 A USB-C adapter — flexible deployment whether at a desk, in a rack room, or out at the edge. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex-XG Switch Type Fully managed, multi-gigabit Layer 2 10GbE Ports (4) 10GbE RJ45 Management / PoE Input (1) GbE, 802.3at PoE+ RJ45 input Management UniFi Network web application & mobile app Power Options 802.3at PoE+ input or 5 V, 5 A USB-C adapter Cooling Fanless (passive) Housing Compact, slim — desktop mountable Compliance NDAA compliant Downloads & Resources USW-Flex-XG Datasheet Ubiquiti Installation Guide Best For NAS & Servers Give storage and servers dedicated 10GbE links for fast backups, transfers, and multi-user access. High-Resolution NVRs Handle the throughput of multi-camera 4K UniFi Protect recording without bottlenecks. Creative Workstations 10G copper to editing and design machines keeps large-file workflows moving. 10G Uplinks Aggregate and uplink other UniFi switches at multi-gigabit speed over standard RJ45. Managed through UniFi Network — a UniFi controller (Cloud Key, Dream Machine, or self-hosted) is recommended for full configuration. Power via an upstream 802.3at PoE+ source or a 5 V, 5 A USB-C adapter. Fanless design — do not stack other hardware on top of the switch, as this affects heat dissipation. Designed for desktop placement with a slim, compact footprint. Frequently Asked Questions How many 10GbE ports does the USW-Flex-XG have? Four 10GbE RJ45 ports, plus one GbE 802.3at PoE+ RJ45 input used for management and powering the switch. How is the Switch Flex XG powered? It can be powered from an upstream 802.3at PoE+ source via its GbE input, or with a 5 V, 5 A USB-C adapter. Is it a managed switch? Yes. It is a fully managed Layer 2 switch, configured and monitored from anywhere through the UniFi Network web app and mobile app. Is the USW-Flex-XG NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Switch Enterprise 8 PoE — 8x 2.5GbE PoE+ Layer 3 Managed Switch (USW-Enterprise-8-PoE) The UniFi Switch Enterprise 8 PoE is a fully managed Layer 3 switch built for high-bandwidth networks — pairing eight 2.5GbE 802.3at PoE+ RJ45 ports with two 10G SFP+ uplinks to power and connect Wi-Fi 6 access points, cameras, and workstations without bottlenecks. A 1.3″ LCM colour touchscreen with AR switch management makes setup and monitoring effortless, while the powerful UniFi Network application gives you full control from anywhere. Wall-mountable with the included kit and backed by genuine Ubiquiti stock with fast Australia-wide shipping, it's the ideal compact backbone for homes, offices, and commercial sites across Australia. PoE+ Ports 8x 2.5GbE PoE Budget 120 W Total Uplinks 2x 10G SFP+ Management Layer 3 Touchscreen Why Choose the UniFi Switch Enterprise 8 PoE? 8x 2.5GbE PoE+ Ports Eight 2.5GbE 802.3at PoE+ RJ45 ports deliver power and multi-gig data over a single cable — ideal for next-generation Wi-Fi 6 access points, cameras, and high-throughput devices that exceed standard gigabit. Dual 10G SFP+ Uplinks Two 10G SFP+ ports provide fast, non-blocking uplinks to your core network or other switches, keeping aggregated traffic flowing smoothly across busy sites. 120 W Total PoE Supply A 120 W PoE budget powers your connected access points, cameras, and IoT devices directly from the switch — no separate injectors or power runs required. 1.3″ LCM Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management displays key system and connection insights at a glance and simplifies setup right at the rack. Fully Managed Layer 3 A fully managed Layer 3 switch configured through the intuitive UniFi Network web application and mobile app — monitor, segment, and route traffic from anywhere. Wall-Mountable Design Ships with a wall-mount kit for flexible, space-saving deployment in offices, comms cupboards, and tight installs where a full rack isn't practical. UniFi Network Integration Managed alongside the rest of your UniFi gear through a single pane of glass — requires the UniFi Network application version 6.3.51 or later. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Enterprise-8-PoE (Switch Enterprise 8 PoE) Switching Layer Fully managed, Layer 3 PoE RJ45 Ports (8) 2.5GbE, 802.3at PoE+ SFP+ Ports (2) 10G SFP+ (uplinks) Total PoE Supply 120 W Display 1.3″ LCM colour touchscreen with AR switch management Mounting Wall-mountable (kit included) Management UniFi Network web application & mobile app Software Requirement UniFi Network application version 6.3.51 and later Compliance NDAA compliant Downloads & Resources USW-Enterprise-8-PoE Datasheet Installation Guide What's in the Box UniFi Switch Enterprise 8 PoE The USW-Enterprise-8-PoE Layer 3 managed switch. Wall-Mount Kit Mounting hardware for flexible wall installation. Documentation Quick-start guide and installation instructions. Not Included SFP+ transceivers, fibre/network cabling, and a UniFi host controller are sold separately. Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports feed next-gen Wi-Fi 6 access points without throttling their throughput. Offices & Comms Cupboards Wall-mountable footprint and touchscreen setup suit space-constrained installs. Camera & IoT Backbones 120 W PoE budget powers cameras and IoT devices directly from one managed switch. High-Bandwidth Networks Dual 10G SFP+ uplinks aggregate traffic for busy, multi-device commercial sites. Managed with the UniFi Network application version 6.3.51 or later via web or mobile app. Eight 2.5GbE 802.3at PoE+ ports share a 120 W total PoE budget across connected devices. Use the two 10G SFP+ ports for high-speed uplinks to your core network or other switches. Mounts to a wall out of the box using the included mounting kit. Frequently Asked Questions How many devices can the Enterprise 8 PoE power? It has eight 2.5GbE 802.3at PoE+ ports sharing a 120 W total PoE budget — enough to power multiple Wi-Fi 6 access points, cameras, or IoT devices depending on each device's draw. What are the 10G SFP+ ports for? The two 10G SFP+ ports are high-speed uplinks used to connect the switch to your core network or to other switches. SFP+ transceivers are sold separately. Do I need a controller to manage it? Yes. The switch is managed through the UniFi Network application (version 6.3.51 or later) via the web interface or mobile app, hosted on a UniFi console such as a Cloud Key, Dream Machine, or self-hosted controller. Can it be wall-mounted? Yes. The switch is wall-mountable and ships with the required mounting kit, making it ideal for offices and comms cupboards. Is the Enterprise 8 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Enterprise 24 PoE — 12x 2.5GbE + 12x 1GbE PoE+, 2x 10G SFP+, Managed Layer 3 (USW-Enterprise-24-PoE) The UniFi Switch Enterprise 24 PoE is a managed Layer 3 switch built for high-density Wi-Fi 6 deployments and modern multi-gig networks. It delivers (12) 2.5GbE PoE+ ports for next-generation access points, (12) Gigabit PoE+ ports, and (2) 10G SFP+ uplinks for fibre backhaul — all driven by a 400W PoE budget. With a 1.3″ touchscreen, single-row RJ45 layout for clean patch-panel cabling, and full UniFi Network management, it is ideal for offices, campuses, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x PoE+ RJ45 PoE Budget 400W Multi-Gig 12x 2.5GbE Uplinks 2x 10G SFP+ Why Choose the UniFi Switch Enterprise 24 PoE? Built for Wi-Fi 6 & Multi-Gig Twelve 2.5GbE PoE+ ports deliver the bandwidth and power modern Wi-Fi 6 access points demand, eliminating the Gigabit bottleneck on high-throughput links. 24 PoE+ Ports, 400W Budget Every RJ45 port supports 802.3af/at PoE+ up to 34.2W per port, with a 400W total PoE capacity to power APs, cameras, and phones over a single cable. 10G SFP+ Fibre Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC uplinks to your core network, preventing congestion as your deployment scales. Managed Layer 3 Switching Full Layer 3 routing, VLANs, and inter-VLAN routing managed through the UniFi Network application — enterprise control with a clean, intuitive interface. 1.3″ Touchscreen Display An onboard 1.3″ touchscreen with AR switch management shows port status, throughput, and PoE usage at a glance — no laptop needed on site. Single-Row RJ45 Layout A single-row port design keeps patch-panel cabling tidy and straightforward, simplifying installation and ongoing maintenance in the rack. Redundant Power Support UniFi SmartPower Redundant Power System (USP-RPS) DC input protects against internal PSU interruption or failure for mission-critical uptime. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Enterprise-24-PoE Switch Type Managed Layer 3 PoE Gigabit Ethernet Switch 2.5G Ports (12) 100/1000/2500 Mbps RJ45 with 802.3af/at PoE+ Gigabit Ports (12) 10/100/1000 Mbps RJ45 with 802.3af/at PoE+ SFP+ Ports (2) 1/10G SFP+ Total PoE Capacity 400W Max PoE+ per Port (PSE) 34.2W PoE Standards IEEE 802.3af/at PoE+ (Pins 1, 2+; 3, 6-) Total Non-Blocking Throughput 62 Gbps Switching Capacity 124 Gbps Forwarding Rate 92.25 Mpps Display 1.3″ touchscreen with AR switch management Power Method (1) Universal AC: 100–240VAC, 8.5A Max, 50/60 Hz Redundant Power (1) USP-RPS DC input: 52VDC, 7.7A; 11.5VDC, 8.7A Power Supply AC/DC, Internal, 550W Max Power Consumption 550W Voltage Range (802.3af) 44 to 57V Voltage Range (802.3at) 50 to 57V ESD/EMP Protection Air: ±16 kV, Contact: ±12 kV Enclosure / Mount SGCC Steel Dimensions 442.4 × 43.7 × 325 mm (17.4 × 1.7 × 12.8″) Weight 5.11 kg (without mount) / 5.2 kg (with mount) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–95% non-condensing Management UniFi Network application (v5.14.12 or higher) Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Enterprise-24-PoE Datasheet Ubiquiti Quick Start Guide Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports unlock the full throughput of high-density Wi-Fi 6 access points. Offices & Campuses Managed Layer 3 routing, VLANs, and 400W PoE for multi-floor business networks. Retail & Hospitality Power APs, cameras, and VoIP phones over a single cable with clean rack cabling. Surveillance Networks 10G SFP+ uplinks and PoE+ ports keep camera and NVR traffic flowing without bottlenecks. Managed through the UniFi Network application — pair with a UniFi gateway, Cloud Key, or Dream Machine for full control. Standard 1U rack-mount form factor; mounting hardware included (SGCC steel). Use 10G SFP+ ports for fibre or DAC uplinks to your core switch or gateway. Add a USP-RPS unit for redundant DC power on mission-critical sites. Frequently Asked Questions What is the total PoE budget of this switch? The USW-Enterprise-24-PoE provides a 400W total PoE capacity across all 24 PoE+ ports, with up to 34.2W per port (802.3af/at). Which ports support 2.5GbE? Twelve of the RJ45 ports support 100/1000/2500 Mbps with PoE+, ideal for Wi-Fi 6 access points. The other twelve are Gigabit PoE+ ports. Is this a Layer 3 managed switch? Yes. It is a managed Layer 3 switch supporting VLANs and inter-VLAN routing, configured through the UniFi Network application. What do I need to manage it? A UniFi Network host such as a UniFi gateway, Cloud Key Gen2 Plus, or Dream Machine Pro/SE running UniFi Network v5.14.12 or higher. Does it support redundant power? Yes. It includes a USP-RPS DC input for UniFi SmartPower redundancy, protecting against internal PSU failure. Is the switch NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti UniFi · NDAA & TAA COMPLIANT Next-Gen Enterprise Networking with Ubiquiti USW-Pro-HD-24-PoE Switch Engineered for high-density environments and professional AV deployments, the Ubiquiti USW-Pro-HD-24-PoE delivers exceptional switching capacity, advanced Layer 3 capabilities, and cutting-edge Etherlighting port illumination. Tailored for modern commercial infrastructures, corporate offices, and data-intensive setups, this platform ensures maximum throughput and robust management. Port Architecture 22x 2.5GbE & 2x 10GbE PoE++ Power Budget 600W Total PoE Supply Switching Performance 230 Gbps Capacity Chassis & Display 1U Rackmount & 1.3" Touchscreen Advanced Management and Etherlighting Integration Featuring integrated Layer 3 protocols including static routing, DHCP server capabilities, and inter-VLAN routing, the USW-Pro-HD-24-PoE optimizes local network performance with minimal administrative overhead. The innovative Etherlighting system dynamically illuminates ports to display location, connection speed, and native VLAN configurations at a glance. Complete with robust Pro AV profiles supporting Dante, NDI, and AES67, it serves as the ultimate backbone for modern smart structures. Multi-Speed PoE++ Connectivity Equipped with twenty-two multi-speed 2.5 GbE ports and two 10 GbE multi-speed ports capable of delivering high-wattage PoE++, effortlessly driving demanding access points, PTZ security cameras, and high-draw AV hardware. Enterprise Redundancy & Security Supports DC power backup integration via UniFi RPS alongside comprehensive security features including advanced IGMP configuration, storm control, and MAC-based device isolation. Technical Specification Matrix Model USW-Pro-HD-24-PoE Total Non-Blocking Throughput 115 Gbps Switching Capacity 230 Gbps Forwarding Rate 171 Mpps Networking Interfaces (22) 2.5 GbE RJ45 PoE++, (2) 10 GbE RJ45 PoE++, (4) 10G SFP+ Total PoE Availability 600W Enclosure Material SGCC Steel Compliance Status NDAA Compliant What is Etherlighting technology on this switch? Etherlighting is an integrated visual feature where ports physically illuminate to indicate port locations, transmission speeds, and assigned VLAN networks when paired with compatible UniFi patch cables. Does this switch support Layer 3 routing features? Yes, it supports fully managed Layer 3 functionalities including inter-VLAN routing, static routing, and local DHCP server operations. Is the USW-Pro-HD-24-PoE compliant with NDAA regulations? Yes, this hardware model is fully NDAA compliant, making it suitable for government, defense, and enterprise installations requiring strict regulatory adherence. What kind of power redundancy does it offer? The unit features an internal 660W AC/DC power supply and supports DC power backup capabilities via the UniFi Redundant Power System (RPS) port. Official Ubiquiti Stock NDAA Compliant & Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi · NDAA & TAA COMPLIANT High-Performance Multi-Gigabit Connectivity for Critical Enterprise Infrastructure Engineered for seamless network aggregation and mission-critical environments, the Ubiquiti USW-WAN-RJ45 delivers elite performance for high-density commercial deployments. Designed to link dual high-availability gateways to a single ISP connection, this advanced 1U rack-mountable switch guarantees zero-downtime operations, robust switching capacity, and low power consumption for enterprise-grade network edges. Port Configuration 3x 10GbE & 1x 1GbE RJ45 Switching Capacity 20 Gbps Non-Blocking Power Redundancy Dual AC Inputs (18W Max) Chassis Construction SGCC Steel 1U Rackmount Advanced Network Management and Shadow Mode Integration The USW-WAN-RJ45 is built to optimize complex routing topologies. By pairing directly with UniFi Shadow Mode High Availability gateways, it effortlessly bridges multi-gigabit workloads while maintaining strict security compliance. Centralized control via the UniFi Network application provides real-time traffic monitoring, granular diagnostic tools, and swift configuration adjustments across your entire infrastructure stack. High-Availability Shadow Mode Support Designed specifically to aggregate dual gateway setups, routing traffic smoothly to a single ISP connection to eliminate single points of failure in mission-critical networks. Enterprise Power Redundancy Features dual internal AC power inputs ensuring continuous operational uptime even if a primary power source fails, backed by an ultra-efficient 18W maximum power draw. Technical Specification Matrix Model USW-WAN-RJ45 Dimensions 442.4 x 120 x 43.7 mm (17.4 x 4.72 x 1.7 in) Weight Without brackets: 2.3 kg (5.1 lb); With brackets: 2.4 kg (5.3 lb) Port Layout (3) 10GbE RJ45 ports (10G/5G/2.5G/1G/100M), (1) 1GbE RJ45 management port Switching Capacity 20 Gbps Total Non-Blocking Throughput 10 Gbps Enclosure Material SGCC Steel Compliance Status NDAA Compliant What is the primary use case for the USW-WAN-RJ45 switch? It is designed to aggregate connections from dual UniFi Cloud Gateways running in Shadow Mode High Availability, directing them into a single ISP uplink while providing robust power and link redundancy. Is this switch NDAA compliant for government deployments? Yes, the Ubiquiti USW-WAN-RJ45 is fully NDAA compliant, making it suitable for federal, defense, and enterprise installations requiring strict regulatory adherence. What management platform does this device require? The switch integrates natively with the UniFi Network application (version 9.1.120 and later) for streamlined provisioning and ongoing remote management. Does the unit support power redundancy out of the box? Yes, it features dual internal AC inputs (100–240V AC) to deliver enterprise-grade power redundancy out of the box. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Network · NDAA COMPLIANT 24-Port Managed Layer 3 Enterprise Switch with 10G SFP+ Uplinks Engineered for corporate networks, high-density office environments, and edge aggregation, the Ubiquiti USW-Pro-HD-24 is a 24-port managed Layer 3 switch. Featuring high-throughput Ethernet interfaces paired with 10G SFP+ optical uplinks, this switch delivers seamless data switching, near-zero latency, and advanced inter-VLAN routing managed centrally through the UniFi Network software suite. Port Density 24x Ethernet Interfaces Optical Uplinks 10G SFP+ Ports Power Redundancy USP-RPS DC Input Compliance NDAA Compliant Layer 3 Routing Architecture & Silent Thermal Management The USW-Pro-HD-24 integrates hardware-accelerated Layer 3 switching capabilities, including static routing, inter-VLAN routing, and DHCP server functionality to significantly reduce main router traffic overhead. Designed with near-silent thermal cooling and equipped with a UniFi Smart Power RPS (USP-RPS) backup power interface, it guarantees continuous operation and uptime for mission-critical enterprise environments. High-Throughput 10G SFP+ Optical Uplinks Connect directly to core fiber backbones or upstream switches at 10 Gbps without encountering bandwidth choke points. 1.3" Color Touchscreen Display with UniFi AR Provides visual port identification, network diagnostic telemetry, and system status directly on the front panel of the switch chassis. Technical Specification Matrix Model USW-Pro-HD-24 Networking Interfaces (24) RJ45 Ports, (2) 10G SFP+ Optical Uplink Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management System UniFi Network Controller Application Compliance NDAA Compliant Does the USW-Pro-HD-24 support Layer 3 switching features? Yes, it supports hardware-level Layer 3 routing features such as static routing and inter-VLAN routing natively. Can I connect this switch to a redundant power supply? Yes, it includes a dedicated USP-RPS port to connect with a UniFi Smart Power RPS for instant DC power failover protection. Is the Ubiquiti USW-Pro-HD-24 NDAA compliant? Yes, the USW-Pro-HD-24 is fully NDAA compliant, making it suitable for corporate, government, and enterprise deployment. Are the SFP+ slots compatible with standard 1G SFP transceivers? Yes, the 10G SFP+ uplink ports auto-negotiate and are fully backwards compatible with standard 1G SFP modules. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Pro Max Series · NDAA COMPLIANT Enterprise Etherlighting™ Layer 3 Switching for High-Density Deployments The USW-Pro-Max-48-PoE is a high-performance, fully managed 48-port Etherlighting™ Layer 3 switch engineered to power modern enterprise networks, high-density WiFi 6/6E/7 access point arrays, and IP surveillance infrastructures. Featuring 16 2.5GbE PoE++ ports, 32 GbE PoE+ ports, and 4 10G SFP+ uplink ports, it delivers exceptional throughput alongside a powerful 720W total PoE availability. Designed for demanding commercial and enterprise environments, this switch provides seamless multi-gigabit connectivity and advanced layer 3 traffic management in a sleek 1U rackmount chassis. Port Capacity 48-Port (16x 2.5GbE, 32x 1GbE) PoE Budget & Optics 720W Total / 4x 10G SFP+ Port Location Tech Etherlighting™ Enabled Power Redundancy USP-RPS DC Backup Ready Advanced Layer 3 Switching & Etherlighting™ Diagnostics Built to streamline network administration in fast-paced deployments, the USW-Pro-Max-48-PoE features patented Etherlighting™ technology. Ports light up to indicate port location, speed, native VLAN configuration, and active PoE status, allowing technicians to perform quick visual auditing directly at the rack. With inter-VLAN routing, static routing, and DHCP server capabilities, this Layer 3 switch offloads routing tasks from core gateway routers to ensure optimum internal data flow. Integration with the UniFi Network application enables multi-site management, real-time metrics, dynamic network visual topologies, and secure cloud configuration from anywhere. Etherlighting™ Port Visualization Patented illuminated RJ45 ports provide clear visual indicators for link speed, native VLAN assignment, operational status, and dynamic location tracking directly on the physical hardware. High-Capacity 720W PoE Architecture Equipped with 16 2.5GbE 60W PoE++ ports (802.3bt) and 32 1GbE 30W PoE+ ports (802.3at) to easily power multi-gigabit wireless APs, PTZ cameras, and VoIP infrastructure. High-Speed 10G SFP+ Uplinks Four 10Gbps SFP+ ports provide high-bandwidth fiber link backhauls to core switches or network storage systems, avoiding bandwidth bottlenecks across campus networks. Mission-Critical Power Redundancy Includes a dedicated DC input port compatible with the UniFi Smart Power Redundant Power System (USP-RPS) for protection against internal AC supply failures. Technical Specification Matrix Model USW-Pro-Max-48-PoE Networking Interfaces (16) 100/1000/2500 Mbps RJ45 Ports(32) 10/100/1000 Mbps RJ45 Ports(4) 1/10 Gbps SFP+ Optical Ports PoE Interfaces (16) PoE++ 802.3af/at/bt (Pair A 1, 2+; 3, 6- / Pair B 4, 5+; 7, 8-)(32) PoE+ 802.3af/at (Pins 1, 2+; 3, 6-) Total Available PoE Budget 720W Max PoE Wattage per Port PoE+: 30W | PoE++: 60W Non-Blocking Throughput / Switching Capacity 112 Gbps / 224 Gbps Forwarding Rate 166.656 Mpps Display & Status Controls 1.3" LCM Color Touchscreen, Etherlighting™ Illuminated Ports Power Method & Redundancy (1) Universal AC Input 100–240V AC, 50/60 Hz(1) USP-RPS DC Input (52V DC, 13.84A / 11.5V DC, 5.22A) Dimensions & Weight 442.4 x 399.6 x 44 mm (17.4 x 15.7 x 1.7") | 6.2 kg (13.7 lb) Is the Ubiquiti USW-Pro-Max-48-PoE NDAA compliant? Yes. The USW-Pro-Max-48-PoE complies with National Defense Authorization Act (NDAA) guidelines, making it suitable for deployment in government-funded projects, commercial enterprises, and infrastructure requiring NDAA compliance. What is Ubiquiti Etherlighting™ and how does it work? Etherlighting™ is an integrated port illumination feature that lights up individual RJ45 ports in customizable colors. It visually identifies port location, operational link speeds, specific VLAN configurations, or custom alerts, significantly speeding up on-site maintenance. Can this switch provide 60W PoE++ power for Wi-Fi 7 access points? Yes. Ports 1 through 16 support 60W PoE++ (IEEE 802.3bt) per port up to 2.5Gbps speeds, providing sufficient power and data bandwidth for demanding multi-gigabit devices like Wi-Fi 7 Access Points and high-draw PTZ cameras. How is power redundancy achieved with the USW-Pro-Max-48-PoE? In addition to its standard internal AC power supply, the switch features a rear USP-RPS DC input port. Connecting it to a UniFi Smart Power Redundant Power System ensures uninterrupted operation if the primary internal AC power fails.  Official Ubiquiti Stock NDAA Compliant Certified Aust-Wide Delivery

Read more less

Ubiquiti UNIFI SWITCHING · NDAA COMPLIANT Compact 8-Port Layer 2 PoE+ Powerhouse The Ubiquiti USW-Ultra is a ultra-compact, high-density 8-port Gigabit Ethernet Layer 2 switch featuring 7 PoE+ output ports and a total PoE availability budget of up to 202W when powered by the included 42W (no AC Adapter), 60W and 210W AC adapter. Designed for sleek tabletop, wall, or DIN-rail deployment, this versatile switch delivers enterprise-grade switching capacity to power IP cameras, access points, and VoIP phones in tight space deployments. Port Count 8x GbE RJ45 Ports PoE Availability 42W, 60W, 120W Management Managed Layer 2 Compliance NDAA Compliant Versatile Power Modes & Centralized Network Control Engineered for complete adaptability, the USW-Ultra offers flexible power input options—capable of being powered via PoE++ or external AC power adapters depending on deployment requirements. Integrated into the centralized UniFi Network controller, administrators gain full control over port-level PoE settings, VLAN tagging, storm control, and real-time power consumption metrics from a unified interface. Massive PoE Budget in Small Form Factor Delivers up to 42W, 60W and 202W total PoE capacity to 7 802.3af/at PoE+ output ports, easily driving multiple high-power devices such as PTZ cameras, access points, and UniFi display panels. Flexible Multi-Surface Mounting Features a ultra-slim chassis designed for subtle mounting on walls, under desks, or on standard DIN-rails, making it ideal for utility closets, retail spaces, and AV cabinets. Technical Specification Matrix Model USW-Ultra-42W / 60W / 210W Networking Interfaces (8) 10/100/1000 Mbps RJ45 Ports PoE Interfaces (1) PoE++ Input Port / (7) PoE+ Output Ports Included Power Supply 42W (no AC Adapter), 60W, 120W Max PoE Output Budget 42W (no Adapter), 52W and 202W (with included 60W and 210W PSU) Total Non-Blocking Throughput 8 Gbps Switching Capacity 16 Gbps Enclosure Material Polycarbonate Regulatory Compliance NDAA Compliant What is the maximum PoE budget when using the included 210W power supply? When powered with the included 210W power supply, the USW-Ultra-210W delivers up to 202W of total available PoE output power across its 7 PoE+ ports. Can the USW-Ultra-210W be powered via PoE instead of the AC adapter? Yes, Port 1 supports PoE+ or PoE++ input. When powered via PoE++, it can provide an output PoE budget to downstream devices without using an AC power brick. Is mounting hardware included with this switch? Yes, the switch comes with wall-mounting hardware and support for magnetic or DIN-rail mounting options for flexible installation. Is the USW-Ultra NDAA compliant? Yes, the UniFi Ultra 210W Switch is officially NDAA compliant and suitable for commercial installations requiring NDAA adherence. Official Ubiquiti Stock NDAA Compliant Aust-Wide Delivery

Read more less

Ubiquiti UniFi · NDAA & TAA COMPLIANT High-Performance Multi-Gigabit Switching for Modern Infrastructure Introducing the Ubiquiti USW-Pro-XG-24, a professional-grade 24-port Layer 3 enterprise switch engineered to satisfy the rigorous demands of high-density data centers, modern campus environments, and high-throughput core networks. Delivering unmatched core routing performance, flexible high-speed connectivity, and intelligent port illumination, this platform provides the foundational stability and speed required by enterprise architectures. Switching Capacity 460 Gbps Total Port Density 16x 10GbE & 8x 2.5GbE Uplink Capability Dual 25G SFP28 Management Layer 3 & Etherlighting Advanced Core Routing & Intelligent Management Engineered for seamless integration into the UniFi ecosystem, the USW-Pro-XG-24 integrates advanced Layer 3 routing protocols including static routing, inter-VLAN routing, and DHCP server/relay capabilities. Featuring innovative Etherlighting technology, ports dynamically illuminate to offer instant visual feedback on port locations, speed/link status, and native VLAN configurations directly from the UniFi Network controller interface. Next-Gen Multi-Gigabit Connectivity Equipped with 16 multi-speed 10 GbE RJ45 ports and 8 multi-speed 2.5 GbE ports, this switch eliminates network bottlenecks, allowing smooth connections for next-generation Wi-Fi 7 access points, local NAS storage arrays, and high-performance client workstations. Carrier-Grade Reliability & Redundancy Designed with an internal robust power supply and support for USP RPS DC power backup integration, the unit ensures continuous uptime for mission-critical enterprise environments where network interruption is never an option. Technical Specification Matrix Model USW-Pro-XG-24 Switching Capacity 460 Gbps Non-Blocking Throughput 230 Gbps Total Ports 26 (16x 10G RJ45, 8x 2.5G RJ45, 2x 25G SFP28) Layer 3 Features Static Routing, Inter-VLAN Routing, DHCP Server/Relay Enclosure Material SGCC Steel Dimensions & Form Factor 442 x 480 x 44 mm (1U Rackmount) Compliance NDAA Compliant What management software does the USW-Pro-XG-24 require? The switch is fully managed through the centralized UniFi Network controller platform, enabling remote configuration, traffic analysis, and effortless multi-site administration. Does this switch support DC power redundancy? Yes, the unit features a DC input port designed to connect seamlessly with the UniFi Redundant Power System (USP RPS) for advanced failover protection. What are the primary use cases for 25G SFP28 uplinks? The dual 25G SFP28 ports allow ultra-high-speed fiber uplinks to core network switches or data center core routers, drastically multiplying backbone bandwidth capabilities. Is the USW-Pro-XG-24 compliant with government procurement regulations? Yes, this model is fully NDAA compliant, making it suitable for federal, defense, and enterprise installations requiring strict regulatory adherence. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Network · NDAA COMPLIANT Next-Gen Etherlighting™ Multi-Gigabit Layer 3 Switching Platform Engineered to power modern high-density enterprise networks, the Ubiquiti USW-Pro-Max-24-PoE is a high-performance Layer 3 Etherlighting™ switch built for demanding WiFi 6/7 and multi-gigabit deployments. Equipped with 2.5GbE ports, PoE++ capability, and 10G SFP+ uplinks, this 24-port managed switch combines advanced network traffic management with real-time port location and speed visual indicators directly on the RJ45 jacks for streamlined cabinet maintenance. Port Configuration 16x 1GbE / 8x 2.5GbE PoE Budget / Uplinks 400W / 2x 10G SFP+ Visual Port Tech Etherlighting™ Ports Compliance NDAA Compliant High-Power PoE Flexibility & Enterprise Redundancy The USW-Pro-Max-24-PoE incorporates a massive 400-Watt PoE supply distributed across 16x 802.3at PoE+ ports and 8x 60W 802.3bt PoE++ ports. Designed to drive demanding devices like UniFi WiFi 7 APs, PTZ cameras, and IP access control hubs, it features dual 10G SFP+ uplink ports to eliminate backhaul bottlenecks. Built-in Layer 3 switching capabilities like inter-VLAN routing, static routing, and DHCP server functions handle local traffic routing efficiently, while USP-RPS DC input compatibility ensures continuous power failover protection. Etherlighting™ Port Illumination Patented illuminated RJ45 ports visually indicate port speed, VLAN tags, connection status, and cable placement directly on the patch panel using customizable color illumination. Multi-Gigabit & High-Power PoE++ Features 8 dedicated 2.5GbE ports providing high bandwidth to next-generation APs, paired with up to 60W per-port PoE++ outputs for power-hungry network appliances. Technical Specification Matrix Model USW-Pro-Max-24-PoE Networking Interfaces (16) 10/100/1000 MbE RJ45 Ports, (8) 100/1000/2500 MbE RJ45 Ports Uplink Interfaces (2) 1/10G SFP+ Ports PoE Interfaces (16) PoE+ 802.3af/at, (8) 60W PoE++ 802.3af/at/bt Total Available PoE Budget 400W Switching Capacity 112 Gbps Total Non-Blocking Throughput Power Method 100-240V AC Universal Input / USP-RPS DC Input Display & Management 1.3" LCM Color Touchscreen, UniFi Network Controller Form Factor & Rackmount 1U Rackmountable (Mounting Brackets Included) Compliance NDAA Compliant What is Ubiquiti Etherlighting™ and how does it help network admins? Etherlighting™ uses RGB LEDs embedded in each RJ45 port to display speed, VLAN assignment, or locator pulses visually, making cable tracing and troubleshooting effortless. How many multi-gigabit (2.5GbE) ports are on the USW-Pro-Max-24-PoE? It includes 8 dedicated 2.5GbE RJ45 ports designed to support multi-gigabit client devices like WiFi 6E/7 access points and high-speed NAS units without bottlenecks. Is the USW-Pro-Max-24-PoE NDAA compliant? Yes, the USW-Pro-Max-24-PoE is fully NDAA compliant and meets compliance standards required for deployment in corporate, public sector, and government environments. Does this switch support redundant power supplies? Yes, it features a rear USP-RPS DC input port that connects to a Smart Power Redundant Power System to maintain continuous operation if the internal AC power source fails. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Network · NDAA COMPLIANT High-Density 24-Port 10GbE Layer 3 PoE++ Enterprise Switch Designed to serve as a high-capacity core or aggregation switch for data-intensive networks, the Ubiquiti USW-Pro-XG-24-PoE is a fully managed Layer 3 multi-gigabit switch. Featuring 24 10GbE RJ45 ports with high-power 802.3bt PoE++ output and ultra-fast 25G SFP28 optical uplinks, this switch provides massive switching throughput, ultra-low latency, and advanced traffic routing managed centrally through the UniFi Network platform. Multi-Gigabit Density 24x 10GbE RJ45 Ports Power Delivery 802.3bt PoE++ Output High-Speed Uplinks 25G SFP28 Ports Compliance NDAA Compliant Advanced Layer 3 Routing & Redundant Power Protection The USW-Pro-XG-24-PoE delivers robust 802.3bt PoE++ capabilities across its 10GbE copper interfaces, capable of powering high-capacity WiFi 7 access points, enterprise PTZ cameras, and desktop workstations. Equipped with comprehensive Layer 3 management capabilities—including inter-VLAN routing, static routing, and DHCP server support—it offloads routing overhead from primary firewalls. To guarantee continuous uptime, it includes a UniFi Smart Power RPS (USP-RPS) port for seamless DC power backup. Auto-Sensing 10GbE Multi-Gigabit Performance Supports 100M/1G/2.5G/5G/10G speed auto-negotiation across all 24 RJ45 ports to eliminate bandwidth bottlenecks for multi-gigabit devices. 1.3" Color LCM Touchscreen Display Features an integrated touchscreen supporting UniFi AR overlay for visual port inspection, real-time power distribution tracking, and quick system status updates. Technical Specification Matrix Model USW-Pro-XG-24-PoE Networking Interfaces (24) 10GbE RJ45 Ports, (2) 25G SFP28 Uplink Ports PoE Capability (24) 802.3at/bt PoE+ / PoE++ Output Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management Software UniFi Network Controller Application Compliance NDAA Compliant Do all 24 RJ45 ports support 10GbE speeds and PoE++? Yes, all 24 ports feature multi-gigabit speeds up to 10GbE with 802.3bt PoE++ power delivery support. Are the SFP28 uplink ports backwards compatible with 10G SFP+ modules? Yes, the 25G SFP28 slots are backwards compatible with standard 10G SFP+ and 1G SFP transceivers or DAC cables. Is the Ubiquiti USW-Pro-XG-24-PoE NDAA compliant? Yes, the USW-Pro-XG-24-PoE is fully NDAA compliant, making it suitable for enterprise, government, and institutional infrastructure. Can I connect this switch to a redundant power system? Yes, it features a USP-RPS port that pairs with a UniFi Smart Power RPS to provide instant failover protection if primary AC power is lost. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Network · NDAA COMPLIANT High-Capacity 10GbE Multi-Gigabit Layer 3 PoE++ Switch Engineered for bandwidth-heavy enterprise networks, high-density WiFi 7 access point deployments, and high-performance server connectivity, the Ubiquiti USW-Pro-XG-8-PoE is a managed 10GbE Layer 3 switch. Featuring multi-gigabit RJ45 ports with high-power PoE++ output and 10G SFP+ optical uplinks, this compact switch delivers high switching throughput, near-zero network latency, and advanced traffic routing capabilities managed centrally via UniFi Network. Multi-Gigabit Ports 10GbE RJ45 Interfaces Power Delivery 802.3bt PoE++ Output Optical Uplinks 10G SFP+ Slots Compliance NDAA Compliant Layer 3 Switching & Smart Power Redundancy The USW-Pro-XG-8-PoE provides 802.3bt PoE++ output across its 10GbE RJ45 ports, supplying up to 60W per port to drive power-hungry devices such as enterprise PTZ cameras, high-performance access points, and POS terminals. Equipped with advanced Layer 3 routing features—including inter-VLAN routing, static routing, and DHCP server functionality—it reduces router traffic bottlenecks. For maximum uptime, it includes a UniFi Smart Power RPS (USP-RPS) input port for DC failover protection. 10GbE Speed Auto-Sensing Ports Supports 100M/1G/2.5G/5G/10G speed auto-negotiation to deliver optimal performance for multi-gigabit client devices without bottlenecking. 1.3" Color Touchscreen Display Features an integrated touchscreen running UniFi AR visualization to show system status, PoE power usage, and port diagnostics directly on the device. Technical Specification Matrix Model USW-Pro-XG-8-PoE Networking Interfaces (8) 10GbE RJ45 Ports, (2) 10G SFP+ Uplink Ports PoE Capability (8) 802.3at/bt PoE+ / PoE++ Output Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management Software UniFi Network Controller Application Compliance NDAA Compliant Do all RJ45 ports on the USW-Pro-XG-8-PoE support 10GbE speeds? Yes, all 8 RJ45 ports support auto-sensing multi-gigabit speeds up to 10GbE (100M/1G/2.5G/5G/10G). Does this switch support PoE++ power output? Yes, the switch provides 802.3bt PoE++ power output capable of supplying up to 60W per port to high-draw devices. Is the Ubiquiti USW-Pro-XG-8-PoE NDAA compliant? Yes, the USW-Pro-XG-8-PoE is fully NDAA compliant, making it suitable for enterprise, government, and commercial network infrastructure. Can I connect this switch to a redundant power supply? Yes, it features a USP-RPS port that connects to a UniFi Smart Power RPS for redundant DC power backup in case of AC power failure. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi · NDAA COMPLIANT Enterprise Switching Power in a Compact Footprint: Meet the USW-Pro-8-PoE Engineered for high-density modern deployments, the Ubiquiti USW-Pro-8-PoE delivers enterprise-grade routing, robust switching capabilities, and versatile power delivery to edge network environments. Ideal for commercial offices, retail spaces, and secure security operations centers, this managed Layer 3 switch combines high-speed 10G fiber uplinks with multi-port PoE support to streamline critical device connectivity without compromising on performance or security compliance. Port Architecture 8 GbE RJ45 Ports Uplink Speed 2x 10G SFP+ Slots Power Budget 120W Total PoE System Management 1.3" Touch Display Advanced Layer 3 Control and Seamless Network Integration The USW-Pro-8-PoE is fully integrated into the UniFi Network management platform, giving administrators centralized control over advanced Layer 2 and Layer 3 features including inter-VLAN routing, static routing, and DHCP server functionality. Complete with granular traffic controls, device isolation via access control lists (ACLs), and rapid configuration via the intuitive UniFi controller interface or built-in touch display, this switch ensures optimized uptime and bulletproof security protocols for mission-critical infrastructure. Flexible PoE++ and PoE+ Support Equipped with six GbE PoE+ ports and two high-power 60W PoE++ ports, providing up to 120W of total available power budget to easily drive high-draw security cameras, VoIP phones, and access points. Enterprise Security & Isolation Mitigate internal threats through advanced port isolation, storm control, 802.1X authentication, and MAC-based access control lists designed to protect sensitive commercial network segments. Technical Specification Matrix Model USW-Pro-8-PoE Networking Interface (8) GbE RJ45 ports, (2) 10G SFP+ ports PoE Interfaces (6) PoE/PoE+, (2) 60W PoE++ Total PoE Availability 120W Switching Capacity 56 Gbps Total Non-Blocking Throughput 28 Gbps Layer Features Layer 2 & Layer 3 Capabilities Compliance Status NDAA Compliant Does the USW-Pro-8-PoE support full Layer 3 routing features? Yes, this switch supports advanced Layer 3 functionalities such as inter-VLAN routing, static routing, and a local DHCP server configuration directly out of the box via the UniFi network application. What is the maximum PoE output per port? Ports 1 through 6 support standard PoE/PoE+ delivering up to 32W, while ports 7 and 8 are designated high-power PoE++ ports capable of delivering up to 64W per port, subject to the total 120W system budget. Is this model compliant with federal trade and defense regulations? Yes, the Ubiquiti USW-Pro-8-PoE is fully NDAA compliant, making it eligible for government, defense, enterprise, and corporate projects requiring strict supply chain compliance. How is the switch managed and configured? It can be effortlessly configured, monitored, and managed using the UniFi Network Application (version 7.5.176 or later) alongside the built-in 1.3-inch LCM color touchscreen interface. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

Read more less

Ubiquiti UniFi Switch · NDAA COMPLIANT High-Density Switching Redefined with USW-Pro-XG-48-PoE Engineered for mission-critical enterprise environments and high-density network deployments, the Ubiquiti USW-Pro-XG-48-PoE is an advanced Layer 3 managed switch. It combines massive switching capacity with high-power PoE+++ delivery, making it the ultimate backbone solution for modern data centers, high-performance security deployments, and large-scale commercial infrastructures. Port Density 32x 10G & 16x 2.5G RJ45 Power Budget 1080W Total PoE+++ Uplink Capacity 4x 25G SFP28 Slots Architecture Layer 3 Managed Switch Advanced Enterprise Routing & Etherlighting Technology The USW-Pro-XG-48-PoE features innovative Etherlighting ports that dynamically illuminate to indicate port location, speed/link status, and native VLAN designation. Driven by robust Layer 3 capabilities including inter-VLAN routing, static routing, and DHCP server features, it streamlines administrative control. Comprehensive security measures—such as DHCP snooping, isolated port configurations, and advanced ACLs—protect core corporate workflows seamlessly. Ultra-High PoE+++ Power Allocation Delivers up to 90W per port across 32 ten-gigabit and 16 multi-gigabit ports, effortlessly energizing power-hungry PTZ security cameras, access points, and digital signage displays without external power injectors. Enterprise-Grade Resiliency & Throughput Boasts a non-blocking throughput of 460 Gbps and total switching capacity of 920 Gbps, coupled with RPS DC input fallback options to guarantee absolute uptime in mission-critical environments. Technical Specification Matrix Model USW-Pro-XG-48-PoE Switching Capacity 920 Gbps Total Non-Blocking Throughput 460 Gbps Networking Interfaces (32) 10G RJ45 (PoE+++), (16) 2.5G RJ45 (PoE+++), (4) 25G SFP28 Total PoE Availability 1080W (200-240V AC) / 972W (100-120V AC) Layer 3 Features Inter-VLAN routing, Static routing, DHCP server Enclosure Material SGCC Steel with 1.3" Touchscreen Display Compliance Status NDAA Compliant Is the USW-Pro-XG-48-PoE NDAA compliant? Yes, this switch is fully NDAA compliant, satisfying government and enterprise supply chain security requirements. What is the maximum PoE output per port? The switch supports PoE+++ configuration, providing up to 90W of power delivery per individual port across all RJ45 interfaces. Does it support redundant power supplies? Yes, it includes a dedicated USP RPS DC input connector for seamless connection to redundant power supply systems. What management platforms control this switch? It is centrally managed via the UniFi Network application, offering real-time analytics, remote topology tracking, and streamlined configuration updates. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery

Read more less

Professional 10GbE Layer 3 Switch Ubiquiti UniFi Pro XG 10 PoE A compact 1U powerhouse delivering ten multi-gigabit PoE+++ ports, dual 10G SFP+ uplinks and advanced Layer 3 control for demanding enterprise, surveillance and professional AV networks. Copper connectivity 10 × 10 GbE Total PoE availability 400W PoE+++ Non-blocking throughput 120 Gbps Network intelligence Layer 3 Enterprise performance without compromise Multi-gig connectivity Ten RJ45 ports support 10G, 5G, 2.5G, 1G and 100M connections, backed by two 10G SFP+ uplinks. High-power PoE+++ Power access points, PTZ cameras, AV endpoints and other demanding devices with up to 90W per copper port. Advanced traffic control Layer 3 routing, VLANs, QoS, LACP, IGMP snooping, ACLs and network isolation provide precise control. Designed for the rack A robust 1U steel enclosure, DC power backup support, Etherlighting™ and a 1.3-inch touchscreen simplify deployment. Recommended applications Enterprise networks High-speed aggregation for offices, campuses, labs and distributed infrastructure. IP surveillance Multi-gig bandwidth and high-power PoE for dense, high-resolution camera deployments. Professional AV Profiles for Dante, Q-SYS, NDI, SDVoE, Shure, AES67 and Crestron environments. WiFi 7 deployments 10GbE access ports supply the bandwidth and power required by next-generation access points. Technical specifications Connectivity & performance Model USW-Pro-XG-10-PoE (400W) RJ45 ports 10 × 10 GbE, all PoE+++ (10G/5G/2.5G/1G/100M) SFP+ ports 2 × 10G SFP+ (10G/1G) Switching capacity 240 Gbps Non-blocking throughput 120 Gbps Forwarding rate 179 Mpps Supported VLANs 1,000 MAC address table 32,000 entries IPv4 static routes 256 PoE, power & hardware Total PoE budget 400W Maximum PoE per port PoE 15.4W; PoE+ 30W; PoE++ 60W; PoE+++ 90W Power supply Internal 550W AC/DC Power input 100–240V AC, 50/60 Hz; USP RPS DC backup input Form factor 1U rack mount Dimensions 442.4 × 285 × 44 mm Weight 4.6 kg without brackets; 4.7 kg with brackets Enclosure SGCC steel Display 1.3-inch touchscreen Operating temperature −5 to 40°C Operating humidity 10–90% non-condensing Advanced switching and routing Layer 3 featuresDHCP server and relay, inter-VLAN routing and static routing for local networks. Layer 2 protectionSTP/RSTP, DHCP snooping and guarding, storm control, loop protection and rate limiting. Access control802.1X, MAC- and IP-based ACLs, device isolation, port restriction and network isolation. Optimised media trafficIGMP snooping, advanced IGMP configuration, jumbo frames, QoS and Pro AV profiles. Deployment notes Requires UniFi Network version 9.1.120 or later. SFP modules, patch leads and optional rack accessories may be sold separately. Confirm device power requirements before allocating the 400W total PoE budget. Product resources Installation guide Manufacturer product page NDAA compliant Professional-grade hardware Australian specialist support Specifications are based on manufacturer information and may change without notice.

Read more less

Ubiquiti Pro Max 24, 24-port, Layer 3 Etherlighting Switch, 2.5 GbE, 16 GbE RJ45 Ports, 16 GbE RJ45 2 10G SFP+, Throughput 56 Gbps, USW-Pro-Max-24 A 24-port, Layer 3 Etherlighting™ switch with 2.5 GbE. Etherlighting™ ports that illuminate to indicate port location, speed/link, and native VLAN/network* (8) 2.5 GbE RJ45 ports (16) GbE RJ45 ports (2) 10G SFP+ ports DC power backup ready Managed with UniFi Network 8.0.24 and later*Pair with UniFi Etherlighting Patch Cables for optimal brightness. Technical Specifications Mechanical Dimensions 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") Weight Without mounting brackets: 4.2 kg (9.3 lb)With mounting brackets: 4.3 kg (9.5 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (16) GbE RJ45 ports(8) 1/2.5 GbE RJ45 ports(2) 10G SFP+ ports Total non-blocking throughput 56 Gbps Switching capacity 112 Gbps Power method (1) Universal input, 100—240V AC, 50/60 Hz(1) USP-RPS DC input Power supply AC/DC, internal, 50W Supported voltage range 100—240V AC Max. power consumption 50W LCM display (1) 1.3" touchscreen Button Factory reset Ambient operating temperature -5 to 40° C (23 to 104° F) Ambient operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC Switching Features Layer 2 features IGMP snoopingSTP / RSTP with priorities and port-level disablePort isolationStorm controlVoice VLANPort mirroringLACP port aggregationMulticast / broadcast rate limitingMAC address blockingFlow control802.1X controlJumbo framesProprietary loop protectionDHCP snooping / guardingEgress rate limitLLDP-MEDPort restricted by MACDevice isolation with ACLs Layer 3 features DHCP for locally-managed networksDHCP relayInter-VLAN routing between networks on same switchStatic routing between local networksNetwork isolation with ACLs Etherlighting™ Ethernet LocatingSpeed/linkNative VLAN/network SFP+ LocatingSpeed/linkNative VLAN/network LEDs System Status RPS Status Application Requirements UniFi Network Version 8.0.24 and later Downloads USW-Pro-Max-24 Installation Guide

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-Flex 3-Pack — Managed Layer 2 Gigabit PoE Switch (USW-Flex-3) The Ubiquiti UniFi USW-Flex is a compact, fully managed Layer 2 Gigabit switch built for flexible PoE deployments — and this listing includes a value 3-pack (USW-Flex-3). Each switch features five Gigabit ports with one PoE input and four auto-sensing 802.3af PoE outputs, a weatherproof housing for indoor or outdoor use, and full management through the UniFi Controller. Ideal for extending your UniFi network to cameras, access points, and IoT devices across homes, offices, and commercial sites anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5x Gigabit PoE Out 4x 802.3af Design Indoor / Outdoor Value 3-Pack Why Choose the UniFi USW-Flex 3-Pack? Managed Layer 2 Gigabit Switching Five Gigabit Ethernet ports deliver fast, reliable wired connectivity with full Layer 2 management — VLANs, QoS, and more — all configurable from the UniFi Controller. Flexible PoE In and Out One PoE input port powers the switch, while four ports offer auto-sensing 802.3af PoE output to power UniFi access points, cameras, and other PoE devices across your network. Up to 46W PoE Budget When powered by a 60W 802.3bt PoE++ source, the USW-Flex provides a maximum PoE output budget of 46W — enough headroom to run multiple downstream devices. Indoor / Outdoor Weatherproof Design A weatherproof housing lets the USW-Flex deploy indoors or outdoors, bringing managed PoE switching to locations a standard rack switch can’t reach. Versatile Mounting Install horizontally or vertically for desktop, magnetic wall-mount, or pole-mount setups — flexible placement for almost any environment. Seamless UniFi Integration Fully configurable through the UniFi Controller for single-pane-of-glass management alongside the rest of your UniFi network — no separate software required. Three Switches, One Pack This USW-Flex-3 listing bundles three switches — ideal for multi-room, multi-site, or larger PoE rollouts at better value than buying individually. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex (3-Pack: USW-Flex-3) Switching Managed, Layer 2 Network Ports 5x Gigabit Ethernet (1x PoE In, 4x PoE Out) PoE Output Auto-sensing 802.3af on 4 ports PoE Input 802.3bt PoE++ (60W) / 802.3af / 802.3at Max PoE Output Budget 46W (when powered by 60W 802.3bt PoE++) Design Indoor / outdoor, weatherproof housing Mounting Horizontal or vertical • desktop, magnetic wall-mount, pole-mount Management UniFi Controller Compliance NDAA compliant Pack Contents 3x USW-Flex switch Downloads & Resources USW-Flex Tech Specs USW-Flex Datasheet (PDF) Best For Camera & AP Deployments Power and connect UniFi cameras and access points at the edge with auto-sensing 802.3af PoE. Indoor & Outdoor Sites Weatherproof housing brings managed PoE switching to balconies, eaves, sheds, and outbuildings. Multi-Room & Multi-Site The 3-pack covers several rooms or locations from a single value purchase. UniFi Network Expansion Extend an existing UniFi network with managed Gigabit ports under one controller. Managed within the UniFi Controller alongside the rest of your UniFi network. Power the switch via an 802.3bt PoE++ source (up to 60W) for the full 46W PoE output budget. Mount horizontally or vertically — desktop, magnetic wall-mount, or pole-mount. Suited to indoor and outdoor installations thanks to the weatherproof housing. Frequently Asked Questions How many switches come in this listing? This USW-Flex-3 listing includes a 3-pack — three USW-Flex managed switches in one purchase. How is the USW-Flex powered? It is powered over its PoE input port. For the full 46W PoE output budget, power it from a 60W 802.3bt PoE++ source. Which devices can it power? Four ports provide auto-sensing 802.3af PoE output, ideal for UniFi access points, cameras, and other 802.3af PoE devices. Can it be used outdoors in Australia? Yes. The USW-Flex has a weatherproof housing designed for indoor or outdoor use, with flexible desktop, wall, and pole mounting. How is it managed? Fully through the UniFi Controller, so it integrates seamlessly with the rest of your UniFi network from a single interface. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48-PoE — 48-Port Managed Gigabit PoE+ Switch (195W) The Ubiquiti UniFi USW-48-PoE is a fully managed Gigabit Layer 2 switch built for serious networks — 48 Gigabit Ethernet ports with 32 auto-sensing 802.3at PoE+ ports, four 1G SFP fibre uplinks, and a silent fanless design. With 195W of total PoE budget, it powers UniFi access points, cameras, and phones over a single cable while a 1.3″ colour touchscreen keeps you in control on-device. Whether you're wiring an office, retail fit-out, school, or warehouse anywhere in Australia, the USW-48-PoE delivers enterprise switching with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 48x GbE + 4x SFP PoE+ Ports 32x 802.3at PoE Budget 195W Total Display 1.3″ Touch LCM Why Choose the UniFi USW-48-PoE? 48 Gigabit Ports, 32 with PoE+ Connect up to 48 Gigabit Ethernet devices, with 32 ports delivering auto-sensing 802.3af/at PoE+ (up to 32W per port) to power access points, cameras, and IP phones over a single cable. Four 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you Gigabit fibre uplink options to your core network — ideal for longer runs and segregating uplink traffic from access ports. 195W Total PoE Availability A 240W internal AC/DC power supply provides 195W of total PoE budget, comfortably running a full complement of UniFi APs and cameras across the rack. 1.3″ Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management shows real-time status and port info — no laptop required for quick checks. Silent Fanless Cooling A fanless cooling design keeps the switch completely silent — perfect for offices, retail counters, and other noise-sensitive spaces. Managed by UniFi Network Configure and monitor every feature from the UniFi Network application and mobile app — VLANs, port profiles, mirroring, and aggregation, all in one graphical interface from anywhere. Advanced Layer 2 Switching An extensive suite of Layer 2 protocols with selectable per-port operation mode (switching, mirroring, or aggregate) gives you flexible, enterprise-grade control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48-PoE Total Ports (48) 10/100/1000 RJ45 + (4) 1G SFP PoE+ Ports (32) GbE 802.3af/at PoE+ (Ports 1–32) Non-PoE Ports (16) GbE RJ45 Total PoE Availability 195W Max. PoE Wattage per Port 32W (802.3at) PoE Voltage Range 802.3af: 44–57V • 802.3at: 50–57V On-Device Display 1.3″ LCM colour touchscreen with AR switch management Management UniFi Network application + mobile app, Ethernet in-band Power Method 100–240VAC, 50/60 Hz, universal input Power Supply AC/DC, internal, 240W Max. Power Consumption (excl. PoE) 45W Cooling Fanless (silent) ESD / EMP Protection Air: ±16 kV • Contact: ±12 kV Shock & Vibration ETSI300-019-1.4 standard Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-48-PoE Datasheet Ubiquiti Installation Guide What's in the Box UniFi USW-48-PoE Switch 48-port managed Gigabit PoE+ switch with integrated 240W power supply. Rack-Mount Hardware Mounting brackets and screws for standard 19″ rack installation. Power Cable AC power cable for 100–240VAC universal input. Documentation Quick-start guide and installation instructions. Best For Offices & Corporate High-density desk connectivity with PoE+ powering UniFi APs, IP phones, and cameras. Retail & Hospitality Silent fanless operation suits front-of-house counters, registers, and quiet spaces. Schools & Campuses 48 Gigabit ports plus fibre uplinks scale across classrooms and shared infrastructure. Warehouses & Sites Centralised PoE for cameras and APs across large floor areas, managed from anywhere. Managed by the UniFi Network application — a UniFi Network host (Cloud Key, Dream Machine, or self-hosted controller) is recommended for full features. Mounts in a standard 19″ rack using the included brackets. 32 PoE+ ports (1–32) auto-sense 802.3af/at devices; remaining ports are data-only Gigabit. Use the four SFP ports for Gigabit fibre uplinks to your core or distribution switch. Frequently Asked Questions How many PoE ports does the USW-48-PoE have? 32 of the 48 Gigabit ports (ports 1–32) deliver auto-sensing 802.3af/at PoE+, up to 32W per port, with a total PoE budget of 195W. Do I need a separate controller? The switch is managed by the UniFi Network application. A UniFi Network host such as a Cloud Key, Dream Machine, or self-hosted controller is recommended to configure and monitor it. Is the USW-48-PoE fanless? Yes. It uses a silent fanless cooling design, making it well suited to offices, retail spaces, and other noise-sensitive environments. What are the SFP ports for? The four 1G SFP ports provide Gigabit fibre uplink options to your core or distribution network for longer runs and dedicated uplinks. Is the USW-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48-PoE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch with Touch Display (USW-Pro-48-PoE) The UniFi Switch Pro 48 PoE (USW-Pro-48-PoE) is a fully managed Layer 2 / Layer 3 access-layer switch built for demanding UniFi networks. It pairs (40) Gigabit PoE+ RJ45 ports, (8) Gigabit PoE++ RJ45 ports, and (4) 10G SFP+ uplinks with advanced routing — inter-VLAN routing, static routing, and a built-in DHCP server. With up to 600W of total PoE, a 1.3″ colour touchscreen, USP RPS power-redundancy input, and near-silent cooling, it's the ideal aggregation point for offices, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48x GbE + 4x 10G SFP+ PoE Budget 600W Total Switching Layer 2 + Layer 3 Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48 PoE? 48 Gigabit PoE Ports Power and connect up to 48 devices over a single cable each — (40) GbE PoE+ ports for APs, cameras, and phones, plus (8) GbE PoE++ (802.3bt) ports for high-draw devices like PTZ cameras and multi-radio access points. 600W Total PoE Budget A generous 600W PoE supply drives a full rack of powered devices, with USP RPS redundant-power input support to keep critical infrastructure online during a power-supply fault. Layer 3 Routing Built In Beyond a rich Layer 2 feature set, the Pro 48 PoE adds inter-VLAN routing, static routing, and a DHCP server — offload routing from your gateway and segment networks right at the access layer. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth uplinks and aggregation to the core, eliminating bottlenecks between switches, servers, and storage. 1.3″ Colour Touch Display An onboard 1.3″ LCM colour touchscreen with AR switch management surfaces port status, throughput, and uptime at a glance — no laptop required at the rack. Managed in UniFi Network Configure and monitor from anywhere through the powerful UniFi Network web and mobile app. Near-silent cooling keeps it quiet enough for offices and comms rooms alike. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Pro-48-PoE (Gen2) Management Fully managed, Layer 2 + Layer 3 PoE+ RJ45 Ports (40) GbE, 802.3at PoE+ PoE++ RJ45 Ports (8) GbE, 802.3bt PoE++ SFP+ Ports (4) 10G SFP+ Total PoE Power 600W Power Redundancy (1) USP RPS DC input Display 1.3″ LCM colour touchscreen with AR switch management Layer 3 Features Inter-VLAN routing, static routing, DHCP server Cooling Near-silent active cooling Management Software UniFi Network application, version 5.10.5 and later Compliance NDAA compliant Downloads & Resources USW-Pro-48-PoE Datasheet Ubiquiti Quick Start Guide Best For Offices & Workplaces Powers desk phones, APs, and cameras across a floor with PoE+ and PoE++ headroom to spare. Retail & Hospitality VLAN-segment guest, POS, and CCTV traffic with Layer 3 routing handled at the switch. CCTV Aggregation 48 PoE ports plus 10G SFP+ uplinks to a UniFi NVR make it an ideal camera access switch. Comms Rooms Near-silent cooling, a touch display, and USP RPS redundancy suit always-on infrastructure. Adopt and manage with the UniFi Network application (version 5.10.5 or later) via a UniFi gateway or Cloud Key. Mixes 802.3at PoE+ and 802.3bt PoE++ ports — check device draw against the 600W total budget. Add a UniFi SmartPower RPS (USP RPS) via the DC input for redundant-power protection. Use the (4) 10G SFP+ ports for high-bandwidth uplinks or aggregation to the network core. Frequently Asked Questions How much PoE power does the USW-Pro-48-PoE provide? It supplies up to 600W of total PoE across its 48 ports — (40) 802.3at PoE+ ports and (8) 802.3bt PoE++ ports for higher-draw devices. Does this switch support Layer 3 routing? Yes. It's a fully managed Layer 2 + Layer 3 switch with inter-VLAN routing, static routing, and a built-in DHCP server. What do I need to manage it? The UniFi Network application (version 5.10.5 or later), running on a UniFi gateway, Dream Machine, or Cloud Key. Configure and monitor from the web or mobile app anywhere. Can I add power redundancy? Yes. The USP RPS DC input lets you connect a UniFi SmartPower Redundant Power System to keep the switch running through a power-supply fault. What are the 10G SFP+ ports for? The four 10G SFP+ ports are high-bandwidth uplinks — ideal for aggregating to the core, linking switches, or connecting to a UniFi NVR or server. Is the USW-Pro-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48 — 48-Port Managed Gigabit Switch with 4 SFP & Touch Display The Ubiquiti UniFi USW-48 is a fully managed 48-port Gigabit switch built for high-density networks that demand reliable, silent performance. With 48 GbE RJ45 ports, 4 dedicated 1G SFP fibre uplinks, and a fanless cooling design, it delivers enterprise-grade connectivity without the noise — ideal for offices, server rooms, retail sites, and large CCTV deployments anywhere in Australia. A built-in 1.3″ colour touchscreen and full integration with the UniFi Network application make managing your entire network effortless. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48× GbE RJ45 Uplinks 4× 1G SFP Display 1.3″ Touchscreen Cooling Silent Fanless Why Choose the UniFi USW-48? 48 Gigabit Ports Connect up to 48 devices over Gigabit Ethernet RJ45 — perfect for high-density offices, IP camera networks, access points, and workstations all from a single 1U switch. 4× 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you flexible fibre or copper uplinks to your core network or other switches, supporting longer runs and high-speed backbones. Silent Fanless Cooling A completely fanless design means zero fan noise — ideal for offices, reception areas, retail spaces, and any location where a quiet switch matters. 1.3″ Colour Touch Display The built-in 1.3″ LCM colour touchscreen with AR switch management shows live status and port info at a glance — no laptop needed for quick checks. UniFi Network Managed Fully managed through the UniFi Network application (Version 7.2.94 and later) for a single-pane view of your entire network — VLANs, monitoring, and configuration in one place. NDAA Compliant Manufactured by US-based Ubiquiti and NDAA Section 889 compliant — suitable for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48 Switching Layer Layer 2 managed RJ45 Ports 48× Gigabit Ethernet (GbE) SFP Ports 4× 1G SFP Display 1.3″ LCM colour touchscreen with AR switch management Cooling Fanless (silent) Management UniFi Network application (Version 7.2.94 and later) Compliance NDAA Section 889 compliant Downloads & Resources USW-48 Datasheet USW-48 Installation Guide Best For Offices & Workspaces High-density Gigabit connectivity for desks, phones, and access points — silent enough for the floor. CCTV & IP Camera Networks Aggregate dozens of cameras and recorders on one managed switch with VLAN segregation. Server & Comms Rooms Reliable 1U switching with SFP fibre uplinks to your core network backbone. Retail & Hospitality Centralised UniFi management across multiple sites with no monthly fees. Managed by the UniFi Network application (Version 7.2.94 or later) running on a UniFi console or self-hosted host. Use the 4× 1G SFP ports for fibre or copper uplinks to your core switch or gateway. Fanless design suits rack or shelf mounting in noise-sensitive environments. Note: the USW-48 is a non-PoE switch — use a PoE switch or injectors for powered devices. Frequently Asked Questions Does the USW-48 supply PoE? No. The USW-48 is a non-PoE Gigabit switch. For PoE devices such as cameras and access points, use a UniFi PoE switch or PoE injectors alongside it. How is the USW-48 managed? It is fully managed through the UniFi Network application (Version 7.2.94 and later), giving you a single-pane view of your network. The built-in touchscreen also shows live status. How many ports does it have? 48 Gigabit Ethernet RJ45 ports plus 4 dedicated 1G SFP ports for fibre or copper uplinks. Is it noisy? No. The USW-48 uses a completely fanless cooling design, so it runs silently — ideal for offices and other quiet spaces. Is the USW-48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48 is NDAA Section 889 compliant, suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Managed — NDAA Compliant Ubiquiti USW-Flex-Mini 5-Pack — UniFi Layer 2 Gigabit Switch (5x GbE, PoE / USB-C) The Ubiquiti USW-Flex-Mini is a fully managed, Layer 2 Gigabit switch with five GbE RJ45 ports in a compact, slim housing — and this value 5-pack is ideal for rolling out UniFi connectivity across desks, AV racks, IoT clusters, or small remote rooms. Each switch can be powered over PoE (802.3af, via Port 1) or with a USB-C adapter, and is monitored and configured anywhere through the UniFi Network app. Genuine Ubiquiti stock with fast Australia-wide shipping. Five Gigabit Ports (5) GbE RJ45 ports — including (1) 802.3af PoE input on Port 1 — in a slim, desk-friendly housing. Flexible Power Power each unit over PoE (802.3af) via Port 1, or with a USB-C 5V/1A adapter — no separate PSU run required. Fully Managed UniFi Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app. NDAA Compliant Ubiquiti is a US-based manufacturer — NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model USW-Flex-Mini (5-Pack) Switch Type Fully managed, Layer 2 Network Ports (5) GbE RJ45, including (1) 802.3af PoE input (Port 1) Power Method PoE (802.3af) via Port 1, or USB-C 5V/1A adapter Management UniFi Network web application & mobile app Housing Compact, slim desktop housing Pack Quantity 5 × USW-Flex-Mini Power Adapter USB-C adapter included only with single-pack units (no PSU in this 5-pack) Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UniFi Aggregation Switch — 8-Port 10G SFP+ Layer 2 Managed, Fanless 1U (USW-Aggregation) The Ubiquiti UniFi Aggregation Switch (USW-Aggregation) is a managed Layer 2 switch built for high-bandwidth interconnects, delivering eight 10G SFP+ ports in a silent, fanless 1U rackmount chassis. With link aggregation for greater capacity and availability, it's the ideal backbone aggregation layer for any UniFi deployment — whether you're wiring a home lab, office, retail site, or commercial network anywhere in Australia. Centrally managed through the UniFi Network application, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 8 × 10G SFP+ Switching Capacity 160 Gbps Form Factor Fanless 1U Management Layer 2 Managed Why Choose the UniFi Aggregation Switch? Eight 10G SFP+ Ports Eight high-bandwidth 10G SFP+ ports provide a dedicated aggregation layer for high-speed interconnects between switches, servers, and UniFi gear — perfect for collapsing multiple links into one fast backbone. Link Aggregation for Capacity & Availability Bond multiple ports together to increase total throughput and add redundancy, so a single link failure won't take your network down — built for resilient interconnect topologies. 160 Gbps Switching Capacity Up to 80 Gbps non-blocking throughput, 160 Gbps switching capacity, and a 119.04 Mpps forwarding rate keep data moving without bottlenecks across demanding workloads. Silent Fanless Design A completely fanless 1U chassis runs silently and reliably — ideal for offices, studios, and quiet environments where rack noise is a concern, with no moving parts to fail. Copper & Fibre Flexibility The built-in 36 W power supply supports copper Ethernet UF-RJ45-10G modules (sold separately) in all eight ports, so you can mix 10G fibre and copper to match your run. UniFi Network Management Configure, monitor, and manage the switch from the UniFi Network application alongside the rest of your UniFi stack — one pane of glass, no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model USW-Aggregation Ports 8 × 10G SFP+ Switching Type Managed Layer 2 Gigabit Ethernet switch Total Non-Blocking Throughput 80 Gbps Switching Capacity 160 Gbps Forwarding Rate 119.04 Mpps Copper Module Support UF-RJ45-10G modules (sold separately) in all 8 ports Management Interface Ethernet in-band Power Method Universal AC input: 100–240 VAC, 50/60 Hz Power Supply AC/DC, internal, 36 W Max. Power Consumption 30 W ESD/EMP Protection Air: ±16 kV • Contact: ±12 kV Enclosure Material SGCC steel Dimensions 442.4 × 120 × 43.7 mm (17.42 × 4.72 × 1.72″) • 1U rackmount Weight 2.65 kg without mount • 2.74 kg with mount Cooling Fanless (silent) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Aggregation Datasheet UniFi Aggregation Quick Start Guide Best For Network Backbones Aggregate 10G uplinks from multiple access switches into a single high-speed core. Servers & NAS Deliver fast, low-latency 10G connectivity to storage, NVRs, and virtualisation hosts. Offices & Studios Silent fanless operation suits quiet workspaces, edit suites, and home racks. UniFi Deployments Slots into any UniFi network as a dedicated aggregation layer, managed centrally. Managed through the UniFi Network application alongside the rest of your UniFi stack. All eight ports accept 10G SFP+ fibre transceivers; copper runs use UF-RJ45-10G modules (sold separately). Standard 1U rackmount with included mounting hardware; fanless for silent operation. Universal 100–240 VAC internal power supply — no external brick required. Frequently Asked Questions What is the USW-Aggregation used for? It's a Layer 2 aggregation switch with eight 10G SFP+ ports, designed to bond high-bandwidth links and serve as a fast backbone between switches, servers, and other UniFi gear. Does it support copper 10G connections? Yes. With UF-RJ45-10G copper Ethernet modules (sold separately), all eight ports can run copper instead of fibre — the internal 36 W supply powers them in every port. Is the switch fanless? Yes. The USW-Aggregation is completely fanless, running silently with no moving parts — ideal for quiet offices, studios, and home racks. How is it managed? It's managed through the UniFi Network application, giving you central control and monitoring alongside your other UniFi devices with no licensing fees. Does it provide PoE? No. The USW-Aggregation is an SFP+ aggregation switch and does not output PoE. Use a UniFi PoE switch for powering cameras and access points. Is the USW-Aggregation NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Aggregation is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

The Switch Enterprise 48 PoE (USW Enterprise 48 PoE) is a fully managed switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports, (4) 10G SFP+ ports, and a 720W total PoE supply. Along with its Layer 3 functionality, this switch offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate).The USW Enterprise 48 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the USW Enterprise 48 PoE offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (48) 2.5GbE, 802.3at PoE+ RJ45 ports (4) 10G SFP+ ports (1) USP RPS DC input 720W total PoE supply Layer 3 switching features Mechanical Dimensions 442 x 44 x 400 mm (17.4 x 1.7 x 15.7") Weight Without Mount: 6.2 kg (13.67 lb) With Mount: 6.3 kg (13.89 lb) Enclosure Material SGCC Steel Mount Material SGCC Steel Hardware Total Non-Blocking Throughput 160 Gbps Switching Capacity 320 Gbps Forwarding Rate 238.095 Mpps Max Power Consumption (Excluding PoE Output) 150W Power Method (1) Universal AC input, 100-240VAC, 10A Max, 50/60 Hz (1) USP-RPS DC input, 52VDC, 13.84A; 11.5VDC, 13A Power Supply AC/DC, Internal, 100-240V, 10A Max. Management Interface Ethernet In-Band Networking Interfaces (48) 100MbE/1GbE/2.5GbE RJ45 port SFP+ Interfaces (4) 1/10G SFP+ ports PoE Interfaces (48) PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) Total Available PoE 720W Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range 802.3af Mode 44 to 57V Voltage Range 802.3at Mode 50 to 57V Services SMB Layer 3 PoE Gigabit Ethernet Switch ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Downloads Datasheet Installation Guide

Read more less