TP-Link Tapo L900-5 Smart Wi-Fi LED Light Strip – 5m | Multicolour | No Hub Required Overview The TP-Link Tapo L900-5 is a 5-metre smart Wi-Fi LED light strip that brings customisable, app-controlled colour lighting to any room — no hub or extra equipment required. Connect directly to your home’s 2.4GHz Wi-Fi network, control it via the Tapo app, or use voice commands with Amazon Alexa or Google Assistant. Cut it to your preferred length, stick it to any surface with the included 3M adhesive backing, and set schedules, scenes, and timers to suit your lifestyle. Whether you’re setting the mood for movie night, winding down before bed, or adding accent lighting to a TV, desk, or shelf, the L900-5 makes smart lighting simple and affordable. Key Features No Hub Required – Connects directly to your home’s 2.4GHz Wi-Fi network via the Tapo app; no additional bridge or hub needed. Voice Control – Compatible with Amazon Alexa and Google Assistant for hands-free control using simple voice commands. Tapo App Control – Control colour, brightness, scenes, schedules, and timers from anywhere via the free Tapo app on iOS or Android. Cuttable to Length – Cut the strip to your preferred length for a perfect fit on any surface or installation. 3M Adhesive Backing – Strong self-adhesive backing for easy, tool-free installation on TVs, shelves, desks, cabinets, and more. Dimmable 1–100% – Full brightness control via the app for the perfect ambience at any time of day. Schedules & Timers – Set automatic on/off schedules with your preferred colour and brightness settings. Scene Presets – Save favourite lighting settings as scenes for one-tap access — movie night, reading, relaxing, and more. Away Mode – Simulate occupancy by automatically turning the strip on and off to deter unwanted visitors when you’re away from home. Energy Saving – Low 13.5W power consumption for efficient, cost-effective smart lighting. Use Cases TV and monitor backlighting for immersive viewing experiences Under-cabinet and shelf accent lighting in kitchens and living rooms Desk and gaming setup ambient lighting Bedroom mood lighting with scheduled dimming for wind-down routines Staircase, hallway, and architectural accent lighting Home automation setups integrated with Alexa or Google Assistant routines Technical Specifications Specification Details Model Tapo L900-5 Strip Length 5,000mm (5m) Dimensions 5000 × 10 × 1.6mm Input Voltage 220–240V, 50/60Hz Power Consumption 13.5W Dimmable 1–100% (via app and cloud) Wi-Fi Protocol IEEE 802.11 b/g/n Wi-Fi Frequency 2.4GHz Voice Assistant Amazon Alexa, Google Assistant App Tapo (iOS & Android) Hub Required No Adhesive 3M Self-Adhesive Backing Operating Temperature -15°C to +40°C Operating Humidity 10–90% RH (Non-condensing) Weight 57g Frequently Asked Questions Does the Tapo L900-5 require a hub or bridge? No. The L900-5 connects directly to your home’s 2.4GHz Wi-Fi network via the Tapo app. No hub, bridge, or additional equipment is required. Can I cut the light strip to a shorter length? Yes. The L900-5 can be cut to your preferred length at designated cut points along the strip. Once cut, the removed section cannot be reattached or used separately. Does it work with Apple HomeKit? The L900-5 is compatible with Amazon Alexa and Google Assistant. Apple HomeKit compatibility is not officially listed for this model. Check the TP-Link Australia support page for the latest compatibility information. Can I control the L900-5 when I’m away from home? Yes. The Tapo app supports remote control over the internet, so you can adjust colour, brightness, schedules, and scenes from anywhere as long as your phone has an internet connection. Is the L900-5 suitable for outdoor use? No. The Tapo L900-5 is designed for indoor use only. It does not carry an IP weatherproof rating and should not be installed in outdoor or exposed environments. Can I connect multiple L900-5 strips together? The L900-5 is a single 5m strip. For longer runs, check whether TP-Link offers extension accessories or consider using multiple independently controlled strips via the Tapo app. Installation Tip: Clean and dry the surface thoroughly before applying the 3M adhesive backing for the strongest bond. For TV backlighting, route the strip around the back perimeter of the TV panel and connect the controller to a USB power source on the TV so the strip turns on and off automatically with the TV.

Read more less

Kit for gate. Includes Wi-Fi controller and wireless magnetic sensor. ismartgate PRO will remotely open, close and control your gate through HomeKit, Google Home, Samsung SmartThings and iFTTT or with native iOS/Android App. Includes key features such as video, user management, audio player, 3 gates control, compatibility with wireless sensor and wired sensors. In the box 1 x ismartgate PRO controller 3 x peeled connection cables 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless magnetic sensor (for gates and roller doors) 1 x Magnet (for sensor) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 3, to control up to 3 doors/ gates Dry contact inputs: 3, to connect up to 3 wired sensors Speaker: Play your music when door is moving Light: Dual LED USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Magnet Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Apple HomeKit Compatible (voice control) The most complete gate controller compatible with HomeKit. Integrate your gate in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate PRO integrates with a Google eco-system too. Make your gate part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate PRO is compatible with iFTTT (visit GarageWifi & Gates channel) for free. Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your gate with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your garage door or gate remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when gate is open, closed or left open on your Smartphone or via email. The gate kit also monitors your gate temperature and sensor's battery condition. NOTE: Additional sensor required. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, gate and location. 10 users for free. Control 3 gates with 1 device One ismartgate PRO device can control a combination of up to 3 garage doors or gates. The ismartgate app can control unlimited devices and doors. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. NOTE: Additional sensor required. Audio player ismartgate PRO includes audio. Add your preferred music or tone and ismartgate PRO will play it when your are coming or leaving home. LED light ismartgate PRO includes two powerful LED lights to provide extra illumination when parking home. These lights will activate when system is used remotely too. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate PRO only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate PRO will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. New wireless gate sensor ismartgate PRO kit gate includes a new waterproof wireless sensor to monitor the status of your gate. The device is compatible with wired sensors too! Time to close ismartgate PRO will open and close your garage automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night!

Read more less

Kit for garage door. Includes Wi-Fi controller and waterproof wireless tilt sensor. ismartgate LITE will remotely open, close and control your garage door through HomeKit, Google Home, Samsung SmartThings and iFTTT or with native iOS/Android App. Includes key features such as video, user management compatibility., automatic open/close with GPS location or time (with iFTTT).  Only for 1 garage door control.Notes: Use Gate Kit for Roller Garage Doors. In the box 1 x ismartgate LITE controller 1 x Peeled connection cable 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless tilt sensor (for garage door) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1, to control 1 door/ gate Dry contact inputs: 0, no wired sensor supported Speaker: Not included Light: Not included USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Gravity sensor Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Apple HomeKit Compatible (voice control) A cost-effective garage door controller compatible with HomeKit. Integrate your garage in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate LITE also integrates with a Google eco-system. Make your garage part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate LITE is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your garage with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your garage door remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when door is open, closed or left open on your Smartphone or via email. The garage kit also monitors your garage temperature and sensor's battery condition. With HomeKit, you will receive alerts when door is stopped. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, door and location. 10 users for free. ONLY 1 DOOR ismartgate LITE garage kit will only control 1 door. For two or three doors garage, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate LITE only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate LITE will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate LITE will open and close your garage automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night!

Read more less

EZVIZ BC1c 4K Wire-Free Battery Security Camera The EZVIZ BC1c 4K Wire-Free Battery Security Camera offers professional-grade surveillance with ultra-clear 4K Ultra HD resolution and a 130° wide-angle lens for comprehensive coverage. Its advanced AI-powered human and vehicle detection minimizes false alerts, keeping notifications accurate and relevant. Powered by a robust 10,400mAh rechargeable battery, it delivers up to 180 days of operation on a single charge and can be continuously powered via USB-C or an optional EZVIZ solar panel for worry-free use. The BC1c 4K is equipped with color night vision enhanced by spotlights, two-way talk, and custom voice alerts, making it a powerful deterrent and communication tool for any property. What sets this model apart is its support for AOV (Always-On Video) Mode — a smart, energy-efficient recording mode that captures time-lapse-style video at scheduled intervals even when no motion is detected. This ensures a continuous visual history of your environment without the storage or battery drain of 24/7 recording — ideal for monitoring driveways, gardens, or construction progress. With IP66-rated weatherproof housing, it withstands harsh outdoor conditions. Wi-Fi 6 connectivity ensures faster, more stable performance, and it integrates easily with Google Assistant and Amazon Alexa for hands-free control. Enjoy flexible storage with support for microSD cards up to 512GB and optional EZVIZ CloudPlay for secure remote access and backup. Available in 1-pack, 2-pack, and 3-pack bundles — the more you buy, the more you save. Perfect for full property coverage and multi-zone surveillance. Features 4K Ultra HD Resolution (8MP) Up to 180 Days Battery Life (10,400mAh) Color Night Vision with Spotlights AI Human & Vehicle Detection  Secure Local (512GB microSD) & Cloud Storage Two-Way Talk + Custom Voice Alerts IP66 Weatherproof Design Works with EZVIZ Solar Panel (sold separately) Wi-Fi 6 Connectivity Compatible with Google Assistant & Alexa Full Specifications Feature Details Resolution 4K Ultra HD (3840 × 2160) Field of View 130° Wide-Angle Battery 10,400 mAh, Rechargeable, 180 Days Charging Options USB-C or EZVIZ Solar Panel Smart Detection AI Human / Vehicle Shape Detection Night Vision Color Night Vision + Infrared (up to 15m) Connectivity Wi-Fi 6 (802.11 b/g/n) Storage microSD up to 512GB & CloudPlay Audio Two-Way Talk, Custom Voice Alerts Weatherproof Rating IP66 Smart Assistant Google Assistant & Amazon Alexa Compression H.265 Perfect for homes, driveways, entrances, farms, or anywhere requiring advanced wireless surveillance with 4K clarity and smart detection. More Information EZVIZ CS BC1c 4K Datasheet EZVIZ CS EB5 4K User Manual

Read more less

Kit for garage door. Includes Wi-Fi controller and waterproof wireless tilt sensor. ismartgate PRO will remotely open, close and control your garage door through HomeKit, Google Home, Samsung SmartThings and iFTTT or with native iOS/Android App. Includes key features such as video, user management, audio player, 3 doors control, compatibility with wireless and wired sensors. Up to 3 x Garage Doors Notes: Use Gate PRO Kit for Roller Garage Doors. In the box 1 x ismartgate PRO controller 3 x peeled connection cables 1 x Power supply 1 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless tilt sensor (for garage door) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 3, to control up to 3 doors/ gates Dry contact inputs: 3, to connect up to 3 wired sensors Speaker: Play your music when door is moving Light: Dual LED USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Gravity sensor Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Apple HomeKit Compatible (voice control) The most complete garage door controller compatible with HomeKit. Integrate your garage in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate PRO integrates with a Google eco-system too. Make your garage part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate PRO is compatible with iFTTT (visit GarageWifi & Gates channel) for free. Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your garage with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your garage door remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when door is open, closed or left open on your Smartphone or via email. The garage kit also monitors your garage temperature and sensor's battery condition. With HomeKit, you will receive alerts when door is stopped. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, door and location. 10 users for free. Control 3 gates with 1 device One iSmartgate PRO device can control a combination of up to 3 garage doors or gates. The ismartgate app can control unlimited devices and doors. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. Audio player ismartgate PRO includes audio. Add your preferred music or tone and ismartgate PRO will play it when your are coming or leaving home. LED light ismartgate PRO includes two powerful LED lights to provide extra illumination when parking home. These lights will activate when system is used remotely too. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate PRO only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate PRO will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate PRO will open and close your garage automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night!  

Read more less

Kit for gate. Includes Wi-Fi controller and waterproof wireless magnetic sensor. ismartgate LITE will remotely open, close and control your gate through HomeKit, Google Home, Samsung SmartThings and iFTTT or with native iOS/Android App. Includes key features such as video, user management compatibility, automatic open/close with GPS location or time (with iFTTT).  Only for 1 gate control. In the box 1 x ismartgate LITE controller 1 x Peeled connection cable 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless magnetic sensor (for gates and roller doors) 1 x Magnet (for sensor) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1, to control 1 door/ gate Dry contact inputs: 0, no wired sensor supported Speaker: Not included Light: Not included USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Magnet Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Apple HomeKit Compatible (voice control) A cost-effective gate controller compatible with HomeKit. Integrate your gate in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate LITE also integrates with a Google eco-system. Make your gate part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate LITE is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your gate with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your gate remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when gate is open, closed or left open on your Smartphone or via email. The gate kit also monitors your garage temperature and sensor's battery condition. Video monitoring (optional) Watch and record events in your gate remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, gate and location. 10 users for free. ONLY 1 DOOR ismartgate LITE gate kit will only control 1 roller door or gate. For two or three gates/roller doors, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Calendar of events Check what happens in your gate from the distance with a built-in calendar of events. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate LITE only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate LITE will open and close your gate automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. New wireless gate sensor ismartgate PRO kit gate includes a new waterproof wireless sensor to monitor the status of your gate. Time to close ismartgate LITE will open and close your gate automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night!

Read more less

Kit for garage door. Includes Wi-Fi controller and waterproof wireless tilt sensor. ismartgate Mini will remotely open, close and control your garage door through Amazon Alexa, Google Home, iFTTT or with native iOS/Android App. Includes key features such as remote access, door status alerts, temperature alerts and automatic open/close with GPS location or time (with iFTTT).  Only for 1 garage door control. In the box 1 x ismartgate Mini controller 1 x Peeled connection cable 1 x Power supply 2 x double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless tilt sensor (for garage door) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1 from 60V 2A Port USB type B Universal Power Supply: 110-240V AC to 5V2A DC (50-60 hz) 2.4Ghz RF receiver 2.4Ghz RF transmitter Accelerometer Temperature indicator Amazon Alexa Compatible A cost-effective garage door controller compatible with Amazon Alexa. Integrate your garage with Amazon Alexa. Google Home Compatible ismartgate Mini also integrates with a Google eco-system. Make your garage part of a Google home! iFTTT Compatible (Free!) ismartgate Mini is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with other smart home platforms through iFTTT, to enjoy full home automation with other smart devices. You can also create unlimited applets with our channel's triggers and actions! Remote Access Open and close your garage door remotely from an app. Internet conection required. Real Time Alerts Receive alerts when door is open, closed or left open on your Smartphone or via email. The garage kit also monitors your garage temperature and sensor's battery condition. For One Door Garage ismartgate Mini garage kit will only control 1 door. For two or three doors garage, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Compatible with Wired Sensors ismartgate Mini is compatible both with wireless sensors (included) or wired sensors. Voice Control You can open and close your garage by asking Alexa or the Google Assistant. Easy to Install ismartgate Mini only requires a screwdriver and 20 minutes of your time. Easy to pair with your Google or Amazon eco-system! Automatic Open/Close ismartgate Mini will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate Mini will open and close your garage automatically at a given time thanks to iFTTT, so you never have to wonder if you closed the garage at night. User Management The iSmartgate MINI allows you to add up to 100 users. However, unlike the LITE and PRO models, the iSmartgate MINI does not allow you to restrict each user by access time or location.Each user will be able to OPEN/CLOSE the garage door or gate at any time from the iSmartgate app.

Read more less

Kit for gate. Includes Wi-Fi controller and waterproof wireless magnetic sensor. ismartgate Mini will remotely open, close and control your gate through Amazon Alexa, Google Home, iFTTT or with native iOS/Android App. Includes key features such as remote access, remote gate status alerts, temperature alerts and automatic open/close with GPS location or time (with iFTTT). Only for 1 gate control. In the box 1 x ismartgate Mini controller 1 x Peeled connection cable 1 x Power supply 2 x double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless magnetic sensor (for gate or roller door) 1 x Magnet (for sensor) 2 x Type-N 1.5V batteries (for sensor) Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1 from 60V 2A Port USB type B Universal Power Supply: 110-240V AC to 5V2A DC (50-60 hz) 2.4Ghz RF receiver 2.4Ghz RF transmitter Reed switch with magnet Temperature indicator Amazon Alexa Compatible A cost-effective gate controller compatible with Amazon Alexa. Integrate your garage with Amazon Alexa. Google Home Compatible ismartgate Mini also integrates with a Google eco-system. Make your gate part of a Google home! iFTTT Compatible (Free!) ismartgate Mini is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with other smart home platforms through iFTTT, to enjoy full home automation with other smart devices. You can also create unlimited applets with our channel's triggers and actions! Remote Access Open and close your gate remotely from an app. Internet conection required. Real Time Alerts Receive alerts when gate is open, closed or left open on your Smartphone or via email. The gate kit also monitors your gate temperature and sensor's battery condition. For One Gate ismartgate Mini gate kit will only control 1 gate. For two or three doors gates, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Compatible with Wired Sensors ismartgate Mini is compatible both with wireless sensors (included) or wired sensors. Voice Control You can open and close your gate by asking Alexa or the Google Assistant. Easy to Install ismartgate Mini only requires a screwdriver and 20 minutes of your time. Easy to pair with your Google or Amazon eco-system! Automatic Open/Close ismartgate Mini will open and close your gate automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate Mini will open and close your gate automatically at a given time thanks to iFTTT, so you never have to wonder if you closed the gate at night. User Management The iSmartgate MINI allows you to add up to 100 users. However, unlike the LITE and PRO models, the iSmartgate MINI does not allow you to restrict each user by access time or location.Each user will be able to OPEN/CLOSE the garage door or gate at any time from the iSmartgate app.

Read more less

Eve Door & Window · 10EBN9951 · Matter over Thread · Smart Contact SensorMatter Contact Sensor Eve Door & Window 10EBN9951 — Matter Contact Sensor · Australian Stock & 2-Year Warranty Know the status of any door or window at a glance. The Eve Door & Window is a wireless contact sensor built on Matter over Thread, so it works across Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant — pick your platform and go. See open/closed state in the app or by voice, trigger automations like lights and heating, and get notified whenever something opens. There is no subscription, no registration and no Eve cloud — your data stays private. Setup takes about a minute with the included adhesive and battery, and no tools are needed. Type Contact Sensor Standard Matter Wireless Thread Power ½ AA Battery Works With Apple · Google · Alexa Install Tool-free · 1 min One sensor, every platform Built on Matter over Thread, the Eve Door & Window works across Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant — no lock-in, just add it to the platform you already use. Automate your home Open a door to switch on the lights and media centre, or pause the heating when a window opens. Refine rules with conditions like time of day so automations run exactly when you want. Check in and get notified See the open/closed state at a glance in the app or by voice, check from anywhere through your hub, and choose to be notified any time or only when nobody is home. Private by design No subscription, no registration and no Eve cloud. All features are included and your activity data stays with you — privacy is built in, not sold as an add-on. Specifications — Eve Door & Window 10EBN9951 Model Eve Door & Window (Matter) · 10EBN9951 Type Wireless magnetic contact sensor (indoor) Standard Matter Wireless Connection Thread Works With Apple Home, Google Home, Amazon Alexa, Samsung SmartThings, Home Assistant Hub Required Matter controller + Thread border router (e.g. HomePod, Apple TV, Nest Hub, Echo, SmartThings Hub) Power 1× ½ AA (ER14250 3.6 V) replaceable battery (included) Sensor Dimensions 52 × 24 × 23 mm Magnet Dimensions 18 × 18 × 8–23 mm Mounting Adhesive, tool-free App Eve app (iPhone/iPad) or your platform's app Requires iPhone/iPad (latest iOS/iPadOS) or Android 8.1+ and a compatible hub Subscription None — no account or Eve cloud required In the Box Eve Door & Window, 1× ½ AA battery, Quick Start Guide Warranty 2 years · CCTV Guru Australia Downloads Eve Door & Window Quick Start GuideEve Important Safety Guide Which smart home platforms does it work with?As a Matter-over-Thread device, the Eve Door & Window works across Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant. You simply add it to the platform of your choice. Do I need a hub?Yes. This Matter sensor needs a hub that provides both a Matter controller and a Thread border router — for example a HomePod, Apple TV, Google Nest Hub, Echo (4th gen) or a SmartThings Hub with Thread. Is there a subscription or Eve account?No. There is no subscription, no registration and no Eve cloud. All features are included and your data stays private. How is it powered?By a single replaceable ½ AA (ER14250 3.6 V) battery, which is included in the box. There is no wiring and nothing to recharge. Indoor or outdoor?Indoor only — ideal for doors, windows, cabinets and safety gates. It is not weatherproof for outdoor use. How hard is it to install?About a minute. The sensor and magnet attach with adhesive — no tools required — then you pair it using your platform's app or voice assistant. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Smart Control and Real-Time Energy Monitoring for Any Plugged-In DeviceThe TP-Link Tapo P110 is a compact mini smart Wi-Fi socket that lets you control any plugged-in appliance remotely, set schedules and timers, and monitor real-time energy consumption — all from the free Tapo app. Its mini design avoids blocking adjacent sockets, and with no hub required, setup takes just minutes. Compatible with Amazon Alexa, Google Home, and Samsung SmartThings for seamless smart home integration.Key Features Real-Time Energy Monitoring — track power consumption, view usage history, and identify energy-hungry devices to reduce electricity costs Remote Control via Tapo App — turn connected devices on or off from anywhere using your smartphone Scheduling and Timers — automate devices with preset schedules or countdown timers for lights, heaters, fans, and more Voice Control — works with Amazon Alexa, Google Home, and Samsung SmartThings for hands-free operation Away Mode — randomly turns devices on and off to simulate occupancy when you’re not home Mini Compact Design — small form factor avoids blocking the adjacent socket in a double outlet No Hub Required — connects directly to your 2.4GHz Wi-Fi network for quick, simple setup RCM Certified — compliant with Australian electrical safety standards 2300W / 10A Maximum Load — suitable for most household appliances Typical Use Cases Monitoring and reducing energy usage of high-draw appliances such as heaters, air conditioners, and washing machines Automating lights, fans, and coffee machines with schedules and timers Remotely controlling devices left on accidentally when away from home Away mode for home security simulation while travelling Smart home integration with existing Alexa, Google Home, or SmartThings setups Technical Specifications Specification Detail Model Tapo P110 Wi-Fi Standard IEEE 802.11b/g/n (2.4GHz) Power Requirements AC 220–240V ~ 50/60Hz Maximum Load 2300W / 10A Dimensions (H×W×D) 76.5 × 43.5 × 42 mm Material PC (Polycarbonate) Buttons Power button LED Indicator Status LED App Tapo (iOS 9.0+ / Android 4.4+) Voice Assistants Amazon Alexa, Google Home, Samsung SmartThings Operating Temperature 0–40°C Certifications RCM, SAA, RoHS Warranty 2 Years Frequently Asked Questions Is the Tapo P110 compatible with Australian power outlets? Yes. The Tapo P110 is designed for Australian and New Zealand standard power outlets (Type I, 220–240V AC) and is RCM and SAA certified for compliance with Australian electrical safety standards. Does the Tapo P110 require a hub or bridge? No. The Tapo P110 connects directly to your 2.4GHz Wi-Fi network — no separate hub, bridge, or controller is required. Simply download the free Tapo app and follow the in-app setup guide. Can I monitor my electricity usage with the Tapo P110? Yes. The Tapo P110 includes real-time energy monitoring that shows current power draw (watts), daily and monthly usage history, and estimated running costs to help you identify and reduce energy waste. Does it work with Apple HomeKit? No. The Tapo P110 is compatible with Amazon Alexa, Google Home, and Samsung SmartThings, but does not currently support Apple HomeKit. What is Away Mode? Away Mode randomly switches connected devices on and off at varying intervals to simulate occupancy when you’re not home, helping to deter opportunistic intruders. It can be enabled and configured via the Tapo app.

Read more less

TP-Link Tapo TC90G Wire-Free 2K QHD Security Camera Kit Truly Wire-Free Security — No Cables, No Compromise The TP-Link Tapo TC90G is a wire-free outdoor security camera kit delivering 2K QHD clarity, AI-powered motion detection, and full-colour night vision — all without running a single power cable. Designed for Australian homes and small businesses, the TC90G works straight out of the box and pairs with an optional solar panel for continuous, maintenance-free operation. Key Features 2K QHD Resolution (2560 × 1440) — Crisp, detailed footage day and night for confident identification of people, vehicles, and events Wire-Free Design — Built-in rechargeable battery means no power cable required; install anywhere within Wi-Fi range Solar Panel Compatible — Connect the Tapo A200 solar panel (sold separately) for continuous charging and truly maintenance-free operation Full-Colour Night Vision — Colour night vision with a built-in spotlight illuminates scenes in vivid colour, not just black and white AI Person & Vehicle Detection — Smart detection filters out false alerts from animals, insects, and environmental movement Two-Way Audio — Built-in microphone and speaker let you communicate with visitors or deter intruders remotely IP66 Weatherproof — Rated for dust and heavy rain; built for permanent outdoor installation in Australian conditions Local & Cloud Storage — Supports microSD card (up to 512 GB) for local recording; optional Tapo Care cloud subscription available Tapo App Control — Live view, playback, alerts, and settings managed from the free Tapo app (iOS & Android) Hub-Free Operation — Connects directly to your 2.4 GHz Wi-Fi router; no additional hub or base station required Use Cases Front door, driveway, and garage monitoring for homes and rental properties Rental and investment property security where running cables is not permitted Sheds, workshops, and outbuildings without mains power access Small business perimeter monitoring — car parks, yards, and entry points Holiday homes and remote properties where solar charging eliminates battery maintenance Technical Specifications Specification Detail Model Tapo TC90G Video Resolution 2K QHD (2560 × 1440) Frame Rate Up to 15 fps Field of View 122° (diagonal) Night Vision Full-colour with spotlight; up to 9 m Motion Detection AI Person & Vehicle Detection Audio Two-way audio (built-in mic & speaker) Power Built-in rechargeable battery; solar panel compatible (Tapo A200) Battery Capacity 10,000 mAh Local Storage microSD card, up to 512 GB (not included) Cloud Storage Tapo Care subscription (optional) Wi-Fi 2.4 GHz 802.11b/g/n Ingress Protection IP66 Operating Temperature -20°C to 45°C Dimensions 73.8 × 73.8 × 145.5 mm Weight 430 g Certifications RCM, CE, FCC, RoHS Recommended Accessories Tapo A200 Solar Panel — Keep your TC90G charged year-round without manual battery top-ups microSD Card (Class 10 / U3, up to 512 GB) — Enable continuous local recording without a cloud subscription Tapo Care Subscription — Cloud storage, advanced AI alerts, and activity history via the Tapo app Downloads TC90G Data Sheet (PDF) TC90G Quick Installation Guide (PDF) RCM Declaration of Conformity Frequently Asked Questions Does the TC90G require a subscription to work? No. The TC90G works fully without a subscription. Insert a microSD card for local recording and receive motion alerts via the free Tapo app. Tapo Care is an optional paid upgrade for cloud storage and extended AI features. How long does the battery last on a single charge? Battery life varies based on activity levels, temperature, and settings. Under typical conditions with moderate motion events, the 10,000 mAh battery can last several months. Pairing with the Tapo A200 solar panel eliminates the need for manual recharging. Can I use the TC90G indoors? Yes. While designed for outdoor use with its IP66 rating, the TC90G can also be used indoors wherever a wire-free, battery-powered camera is preferred. What Wi-Fi frequency does the TC90G use? The TC90G connects to 2.4 GHz Wi-Fi networks only. Ensure your router broadcasts a 2.4 GHz SSID and that the camera is within reliable Wi-Fi range of your access point. Is a microSD card included in the kit? No. A microSD card is not included. The TC90G supports cards up to 512 GB (Class 10 or U3 recommended) for local video storage. Does the spotlight activate automatically at night? Yes. The spotlight can be configured to activate automatically on motion detection at night, illuminate continuously in low light, or be triggered manually via the Tapo app.

Read more less

TP-Link Tapo TD21 Smart Video Doorbell 2K QHD Wired with Chime See Who’s at the Door — Before You Open It The TP-Link Tapo TD21 is a wired smart video doorbell that gives you crystal-clear 2K QHD visibility of your front door, day and night. With full-colour night vision, AI-powered person and vehicle detection, two-way audio, and instant push notifications to your phone, you’ll always know who’s at your door — whether you’re in the kitchen, at work, or on the other side of the country. Powered by your existing doorbell wiring and paired with an included indoor chime, the TD21 is a straightforward upgrade for any Australian home. Key Features 2K QHD Video (2560×1440) — Sharper than standard 1080p, delivering clear footage of faces, packages, and number plates at your front door. Full-Colour Night Vision — Built-in spotlight LEDs illuminate the scene in full colour after dark, not just black-and-white infrared — so you can see exactly what’s happening. AI Person & Vehicle Detection — Intelligent detection filters out irrelevant motion and sends targeted alerts only when a person or vehicle is detected, reducing false notifications. Two-Way Audio — Built-in microphone and speaker let you speak with visitors in real time through the Tapo app, from anywhere with an internet connection. Instant Push Notifications — Receive doorbell press alerts and motion detection notifications on your smartphone the moment activity is detected. Wired Installation — Powered by your existing 8–24 V AC doorbell wiring for continuous, reliable operation without battery management. Included Indoor Chime — Plug-in chime unit included in the box — no separate purchase required for indoor doorbell alerts. Local & Cloud Storage — Supports microSD card recording (up to 256 GB) and optional Tapo Care cloud storage for flexible footage access. Wide 160° Field of View — Broad horizontal coverage captures the full width of your entrance, porch, and driveway approach. Works with Alexa & Google Home — View live footage on compatible smart displays with a voice command. IP65 Weather Resistance — Rated for outdoor installation in Australian conditions including rain, dust, and humidity. No Subscription Required — Full functionality including live view, motion alerts, and local recording is available free of charge. Use Cases Front Door Security — Monitor your front entrance 24/7 with 2K video and colour night vision, and receive instant alerts when someone approaches or rings the bell. Package & Delivery Monitoring — Get notified when deliveries arrive and speak with couriers remotely to redirect parcels or provide access instructions. Visitor Management — Screen visitors before answering the door, or communicate with guests when you’re not home, via two-way audio from the Tapo app. Rental & Investment Properties — Provide landlords and property managers with a remotely managed front-door monitoring solution without ongoing subscription costs. Smart Home Integration — Integrate with Alexa and Google Home for voice-activated live view on smart displays and automation with other Tapo smart home devices. Technical Specifications Specification Detail Model Tapo TD21 Video Resolution 2K QHD (2560×1440) Field of View 160° horizontal Night Vision Full-colour (spotlight LEDs) AI Detection Person detection, Vehicle detection Audio Two-way (built-in microphone & speaker) Power Supply Wired: 8–24 V AC (existing doorbell wiring) Chime Included Yes — plug-in indoor chime Local Storage microSD card, up to 256 GB Cloud Storage Tapo Care (optional subscription) Wi-Fi Standard IEEE 802.11b/g/n, 2.4 GHz Weather Rating IP65 (dust-tight, water jet resistant) Operating Temperature −20 °C to +50 °C App Tapo (iOS & Android) Smart Home Integration Amazon Alexa, Google Home Certifications RCM (AU/NZ), CE, RoHS Colour White Recommended Accessories TP-Link Tapo H200 Smart Hub — Expands your Tapo ecosystem with additional smart home automation, siren, and hub-connected sensor support. TP-Link Tapo TC85 — 2K pan/tilt indoor Wi-Fi camera for complementary indoor monitoring alongside your front-door doorbell. TP-Link Tapo C310 — Outdoor fixed-lens Wi-Fi camera for additional coverage of driveways, side gates, and backyards. microSD Card (128 GB or 256 GB, Class 10 / UHS-I) — Required for local continuous or event-triggered recording. Not included. Downloads TD21 User Guide (PDF) — TP-Link AU TD21 Quick Installation Guide (PDF) — TP-Link AU Frequently Asked Questions Does the TD21 require existing doorbell wiring? Yes. The Tapo TD21 is a wired doorbell that requires an existing 8–24 V AC doorbell circuit for power. If your home does not have existing doorbell wiring, a licensed electrician can install a suitable circuit, or consider a battery-powered doorbell alternative. Is a subscription required to use the TD21? No. The TD21 works fully without a subscription. Live view, push notifications, and local microSD recording are all free. Tapo Care cloud storage is an optional paid add-on for off-device backup and extended recording history. What is the difference between colour night vision and standard infrared night vision? Standard infrared night vision produces black-and-white footage in low light. The TD21’s full-colour night vision uses built-in spotlight LEDs to illuminate the scene in colour, making it easier to identify clothing colours, vehicle colours, and other details that are lost in black-and-white footage. Does the TD21 work with my existing mechanical chime? The TD21 includes a plug-in electronic chime. Compatibility with existing mechanical chimes varies — refer to the TP-Link AU installation guide or contact TP-Link AU support to confirm compatibility with your specific chime unit. What Wi-Fi frequency does the TD21 support? The TD21 supports 2.4 GHz Wi-Fi only (802.11b/g/n). It is not compatible with 5 GHz networks. Ensure your router broadcasts a 2.4 GHz network during setup. Is the TD21 suitable for outdoor installation in Australia? Yes. The TD21 carries an IP65 weather-resistance rating and an operating temperature range of −20 °C to +50 °C, making it suitable for outdoor installation across Australian climates including coastal, tropical, and arid environments. Does CCTV Guru ship the TD21 Australia-wide? Yes. We ship to all states and territories across Australia, including metro and regional areas, with fast dispatch from our Australian warehouse.

Read more less

TP-Link Tapo TC46 4MP Outdoor Pan & Tilt Wi-Fi Security Camera Overview The TP-Link Tapo TC46 is a 4-megapixel outdoor pan and tilt Wi-Fi security camera that gives you full 360° horizontal and 90° vertical coverage from a single mounting point. With motorised pan and tilt, full-colour night vision, AI-powered person and vehicle detection, and two-way audio, it eliminates blind spots and keeps you in control of your property from anywhere via the free Tapo app. No NVR, no subscription, and no complicated setup — just comprehensive outdoor surveillance for Australian homes and small businesses. Key Features 360° Pan & 90° Tilt: Motorised pan and tilt covers your entire outdoor area from a single camera — no blind spots, no need for multiple fixed cameras. 4MP Full-Colour Imaging: 2560 × 1440 resolution with a wide-angle lens for sharp, detailed footage across the full field of view. Full-Colour Night Vision: Smart supplemental lights produce vivid colour images in low-light and dark conditions, not grainy black-and-white IR footage. AI Person & Vehicle Detection: Intelligent detection reduces false alerts from animals, foliage, and passing headlights, notifying you only when a person or vehicle is detected. Auto-Tracking: Automatically follows detected movement across the pan and tilt range, keeping subjects in frame without manual control. Two-Way Audio: Built-in microphone and speaker for real-time communication through the Tapo app — greet visitors or deter intruders remotely. IP66 Weatherproof: Rated for outdoor use in rain and dust — built for year-round Australian conditions. Flexible Storage — No Subscription Required: Supports local microSD card storage (up to 512 GB, not included) and optional Tapo Care cloud storage. Works with Alexa & Google Home: View live footage on compatible smart displays and control the camera with voice commands. Ideal Use Cases Driveways & Front Yards: Single pan and tilt camera covers the full driveway, front garden, and entry point without multiple fixed cameras. Backyards & Pools: Monitor large outdoor areas with auto-tracking to follow movement across the full yard. Small Business Exteriors: Cover car parks, loading docks, and building perimeters with a single motorised camera and remote pan/tilt control. Rental Properties: Easy wireless installation with local microSD storage — no NVR or ongoing subscription costs. Holiday Homes: Remote pan and tilt control via the Tapo app lets you check any corner of the property from anywhere in Australia. Technical Specifications Specification Detail Resolution 4MP (2560 × 1440) Pan Range 360° horizontal Tilt Range 90° vertical Night Vision Full-colour; smart supplemental light; up to 30 m Smart Detection AI person detection, vehicle detection Auto-Tracking Yes — follows detected movement automatically Audio Built-in microphone & speaker; two-way audio Wi-Fi IEEE 802.11b/g/n; 2.4 GHz Local Storage microSD card up to 512 GB (not included) Cloud Storage Optional Tapo Care subscription Power Supply DC 12 V / 1.5 A (adaptor included); weatherproof cable Ingress Protection IP66 (dust & weatherproof) Operating Temperature -30 °C to 60 °C Mounting Wall mount (bracket included) Smart Home Amazon Alexa, Google Home App Tapo (iOS & Android) — free Certifications CE, RoHS, FCC Warranty 2 Years Official Product Video See the Tapo TC46 pan, tilt, auto-track, and full-colour night vision in action: Search TP-Link Tapo TC46 on YouTube → Recommended Accessories & Compatible Products microSD Card (Class 10 / U3, up to 512 GB) — required for local continuous or event-based recording; not included. Tapo H200 Smart Hub — pairs with Tapo cameras and sensors for a unified smart home security system with local alarm siren. Tapo TC34 — fixed 4MP outdoor full-colour camera for covering specific entry points alongside the TC46’s wide-area pan and tilt coverage. Tapo C420S2 Wire-Free Kit — battery-powered cameras for locations without a nearby power outlet. Outdoor-Rated Extension Cable — weatherproof power extension for mounting the TC46 in locations further from a power point. Downloads Tapo TC46 Datasheet & Quick Installation Guide (TP-Link AU) Official TP-Link Tapo TC46 Product Page Frequently Asked Questions What is the difference between the TC46 and a fixed outdoor camera? A fixed camera covers a single, static field of view. The TC46’s motorised pan and tilt lets you remotely move the camera 360° horizontally and 90° vertically via the Tapo app, covering your entire outdoor area from one mounting point. The auto-tracking feature also follows detected movement automatically, keeping subjects in frame without manual control. Does the TC46 record in colour at night? Yes. The TC46 uses smart supplemental lights to produce full-colour footage in low-light and dark conditions. The camera intelligently switches between colour and IR modes based on ambient light, so you get colour footage when it matters most rather than grainy black-and-white images. Do I need a subscription to use the TC46? No — the TC46 works fully without any subscription. Insert a microSD card (up to 512 GB, sold separately) for local recording at no ongoing cost. Tapo Care cloud storage is available as an optional paid subscription for off-site recording backup and extended history. Does it need to be wired for power? Yes — the TC46 is powered by the included 12 V DC adaptor via a weatherproof cable. It connects to your home network via 2.4 GHz Wi-Fi, so no Ethernet cable is needed for data. A nearby outdoor power point is required for installation. Is it suitable for Australian outdoor conditions? Yes. The TC46 carries an IP66 weatherproof rating (protected against powerful water jets and dust) and operates across a temperature range of -30 °C to 60 °C, making it suitable for Australian climates from tropical north Queensland to alpine Victoria. Can I manually control the pan and tilt remotely? Yes. The Tapo app provides a live view with on-screen directional controls to manually pan and tilt the camera in real time from anywhere with an internet connection. You can also set preset positions and patrol routes for automated scanning of your property.

Read more less

Everything You Need to Start Monitoring Your Home The TP-Link Tapo TC50 Starter Kit gives you a complete indoor home security solution straight out of the box. Built around the Tapo TC50 2K QHD Wi-Fi camera, the kit includes all the essentials to get up and running quickly — with sharp 2K resolution, colour night vision, AI person detection, and two-way audio, all managed from the Tapo app on your phone. Whether you’re setting up your first home security camera or expanding an existing Tapo system, the TC50 Starter Kit removes the guesswork and delivers a ready-to-use solution from day one. Key Features 2K QHD resolution (2560×1440) for sharp, detailed video footage Colour night vision with built-in spotlight for clear full-colour low-light monitoring AI-powered person detection with instant push notifications to your phone Two-way audio — built-in microphone and speaker for real-time communication Privacy mode — physically rotates lens away when not in use Local storage via included MicroSD card — no subscription required for recording Optional Tapo Care cloud storage for extended video history Works with Amazon Alexa and Google Home for voice control and smart display viewing Easy Wi-Fi setup via the Tapo app (iOS & Android) Compatible with the full Tapo smart home ecosystem What’s in the Kit 1× Tapo TC50 2K QHD Indoor Wi-Fi Security Camera 1× MicroSD card (capacity as specified on packaging) Power adapter and mounting hardware Quick start guide Use Cases Home Security: Monitor entry points, living areas, and valuables with AI person detection and instant alerts when unexpected movement is detected. Baby & Child Monitoring: Keep an eye on sleeping babies or young children with 2K clarity and two-way audio to soothe them remotely. Pet Monitoring: Check in on pets while you’re at work or away, and use the two-way speaker to interact with them remotely. Elderly Care: Discreetly monitor the safety and wellbeing of elderly family members living independently. First-Time Camera Buyers: The starter kit format removes the need to source compatible accessories separately — everything is included and ready to use. Technical Specifications Specification Detail Model Tapo TC50 Kit Resolution 2K QHD — 2560×1440 pixels Night Vision Colour night vision with built-in spotlight AI Detection Person detection, motion detection Audio Two-way audio (built-in mic & speaker) Local Storage MicroSD card (included in kit) Cloud Storage Optional — Tapo Care subscription Wi-Fi 2.4 GHz 802.11b/g/n Privacy Mode Yes — physical lens rotation Voice Assistant Amazon Alexa, Google Home App Tapo (iOS & Android) Power DC 5V via included power adapter Installation Desktop or ceiling/wall mount (hardware included) Operating Temperature 0°C to 40°C (indoor use only) Certifications RCM (Australia), CE, RoHS Official Product Video See the Tapo TC50 in action and learn how quick and easy it is to set up: Watch Tapo TC50 Videos on YouTube Recommended Accessories & Compatible Products Tapo TC65 Outdoor Security Camera: Extend your Tapo system outdoors with a weatherproof companion camera Tapo TC43 Indoor Pan/Tilt Camera: Add 360° pan/tilt coverage to another room in your home Tapo H200 Smart Hub: Expand into a full smart home security system with Tapo sensors, sirens, and automations Additional MicroSD Card (Class 10 / U3): Upgrade to a higher-capacity card for longer local recording history TP-Link Deco Mesh Wi-Fi System: Ensure strong 2.4 GHz Wi-Fi coverage throughout your home for reliable camera connectivity Downloads Tapo TC50 Datasheet & User Guide (TP-Link Australia) Frequently Asked Questions Does the TC50 Starter Kit include a MicroSD card? Yes. The TC50 Starter Kit includes a MicroSD card for local video recording, so you can start recording immediately without purchasing additional storage. Check the product packaging for the exact card capacity included. Do I need a subscription to record and view footage? No. The included MicroSD card enables local recording with no ongoing subscription required. An optional Tapo Care cloud subscription is available if you want cloud-based storage, extended video history, or advanced AI detection features. Is the TC50 suitable for outdoor use? No. The Tapo TC50 is designed for indoor use only and is not weatherproof. For outdoor monitoring, consider the Tapo TC65 or Tapo C500, which are rated for outdoor installation. How does the privacy mode work? When privacy mode is activated via the Tapo app, the camera physically rotates its lens to face downward, providing a clear visual indication that the camera is not recording. This is particularly useful in shared living spaces or when you want to ensure complete privacy at home. Can I view the TC50 on my TV via Alexa or Google Home? Yes. The TC50 is compatible with Amazon Alexa and Google Home. You can ask your voice assistant to display the live camera feed on an Alexa-enabled smart display (such as an Echo Show) or a Google Nest Hub. What is the difference between the TC50 Kit and buying the TC50 camera on its own? The TC50 Starter Kit bundles the camera with a MicroSD card and all necessary accessories, making it the most convenient option for first-time buyers who want a complete, ready-to-use solution. If you already have a compatible MicroSD card, purchasing the standalone TC50 camera may be more cost-effective.

Read more less

TP-Link Tapo TC47 4MP Outdoor Pan/Tilt Wi-Fi Security Camera with Colour Night Vision Overview The TP-Link Tapo TC47 is a 4-megapixel outdoor pan/tilt Wi-Fi security camera built for around-the-clock home monitoring. With full 360° horizontal pan and 130° vertical tilt, full-colour night vision powered by a built-in spotlight, AI-powered motion detection, and two-way audio, it gives you complete visibility of your property day and night — all managed from the free Tapo app on your smartphone. Whether you are keeping an eye on your driveway, backyard, or front door, the TC47 delivers sharp, detailed footage in any lighting condition. Key Features 4MP QHD Resolution: Captures crisp 2560×1440 footage with fine detail for clear identification of people, vehicles, and events. 360° Pan & 130° Tilt: Full motorised pan and tilt coverage eliminates blind spots — monitor your entire property from a single camera. Full-Colour Night Vision: Built-in spotlight delivers vivid colour footage in complete darkness, not just black-and-white infrared. AI-Powered Detection: Distinguishes between people, vehicles, and other motion to reduce false alerts and send smarter notifications. Two-Way Audio: Built-in microphone and speaker allow you to hear and speak to visitors or deter intruders remotely via the Tapo app. IP66 Weatherproof Rating: Dust-tight and protected against powerful water jets — built to withstand Australian outdoor conditions. Local & Cloud Storage: Supports microSD card storage (up to 512 GB) and optional Tapo Care cloud subscription for extended video history. Motion Tracking: Automatically follows detected movement across the camera’s pan/tilt range to keep subjects in frame. Siren & Light Alerts: Trigger the built-in siren and spotlight to deter intruders when motion is detected. Tapo App Control: Live view, playback, two-way audio, and camera control from anywhere via the free Tapo app (iOS & Android). Works with Alexa & Google Home: Integrates with popular smart home platforms for voice control and automation. Use Cases Home Driveway & Garage Monitoring: Pan and tilt to cover the full driveway, garage entrance, and surrounding area from a single mounting point. Backyard & Garden Security: Monitor large outdoor areas with full 360° coverage and colour night vision for after-dark visibility. Front Door & Entry Surveillance: Identify visitors and deter package theft with two-way audio and AI person detection alerts. Rental Property Monitoring: Keep an eye on your property remotely via the Tapo app from anywhere in Australia or overseas. Smart Home Integration: Automate lighting and security responses using Alexa, Google Home, or Tapo smart home routines. Specifications Specification Detail Model Tapo TC47 Resolution 4 MP (2560×1440, QHD) Pan Range 360° horizontal Tilt Range 130° vertical Night Vision Full-colour (built-in spotlight) + IR Detection AI Person & Vehicle Detection, Motion Detection Audio Two-way (built-in mic & speaker) Connectivity Wi-Fi 2.4 GHz (802.11b/g/n) Local Storage microSD card, up to 512 GB (card not included) Cloud Storage Tapo Care (subscription, optional) Weatherproof Rating IP66 Power AC power adapter (included) Smart Home Amazon Alexa, Google Home App Tapo (iOS & Android, free) Operating Temperature −30–60°C Certifications RCM (AU/NZ) Official Videos Watch the official TP-Link Tapo TC47 overview and setup guide: View Tapo TC47 Videos on YouTube Recommended Accessories Tapo Care Subscription — unlock cloud video history, advanced AI alerts, and activity zones for enhanced monitoring. microSD Card (Class 10 / U3, up to 512 GB) — required for local on-camera video recording and playback. Tapo Hub (e.g. Tapo H200) — expand your Tapo smart home ecosystem with sensors, sirens, and automation routines. TP-Link Deco or Archer Wi-Fi Router — ensure strong 2.4 GHz Wi-Fi coverage at the camera’s installation location for reliable connectivity. Downloads Tapo TC47 Datasheet, Firmware & Resources (TP-Link Official AU) Frequently Asked Questions Does the Tapo TC47 record in colour at night? Yes. The TC47 features a built-in white light spotlight that activates at night to capture full-colour footage — not just black-and-white infrared. You can configure it to activate on motion detection or remain on continuously. Does the TC47 require a subscription to work? No. The TC47 works fully without a subscription when using a microSD card for local storage. The optional Tapo Care subscription adds cloud video history, advanced AI detection features, and activity zones. Is the TC47 suitable for Australian outdoor conditions? Yes. The TC47 carries an IP66 weatherproof rating, making it dust-tight and resistant to powerful water jets. Its operating temperature range of −30–60°C covers the full range of Australian climates from alpine to tropical. Does the camera require continuous power? Yes. The TC47 is powered by an AC power adapter (included) and requires a mains power outlet at or near the installation location. It is not battery-powered. Can I view the camera remotely when I am away from home? Yes. The free Tapo app (iOS & Android) provides live view, two-way audio, playback, and pan/tilt control from anywhere with an internet connection. How much microSD card storage do I need? The TC47 supports microSD cards up to 512 GB (Class 10 / U3 recommended). Storage duration depends on recording mode and activity level — a 128 GB card typically provides several days of continuous recording at 4MP resolution.

Read more less

Complete Outdoor Pan/Tilt Security — Ready Straight Out of the Box The TP-Link Tapo TC93D Starter Kit delivers a complete outdoor security solution built around the Tapo TC93D — a 2K QHD outdoor pan/tilt Wi-Fi camera with 360° horizontal rotation and full weatherproof protection. With all mounting accessories included, you can have your outdoor camera up and running in minutes. Please note: No SD card is included. A MicroSD card (Class 10 / U3, up to 512 GB) is required for local recording and must be purchased separately. Designed for Australian conditions, the TC93D combines IP66-rated weatherproofing with colour night vision, AI person and vehicle detection, and two-way audio — giving you comprehensive outdoor coverage from a single, easy-to-install device. Key Features 2K QHD resolution (2560×1440) for sharp, detailed outdoor footage 360° horizontal pan and 130° vertical tilt for full outdoor area coverage IP66-rated weatherproof enclosure — protected against rain, dust, and harsh outdoor conditions Colour night vision with built-in spotlight for clear full-colour low-light footage AI-powered person and vehicle detection with instant push notifications Two-way audio with built-in microphone and speaker Local storage via MicroSD card slot (up to 512 GB) — SD card not included, sold separately Optional Tapo Care cloud storage for extended video history Motion tracking — automatically follows detected movement across the pan/tilt range Works with Amazon Alexa and Google Home Easy Wi-Fi setup via the Tapo app (iOS & Android) What's in the Kit 1× Tapo TC93D 2K QHD Outdoor Pan/Tilt Wi-Fi Security Camera Power adapter and outdoor mounting hardware Quick start guide No SD card included — MicroSD card (Class 10 / U3, up to 512 GB) required for local recording, sold separately Use Cases Front Door & Driveway Monitoring: Pan/tilt coverage and vehicle detection make the TC93D ideal for monitoring driveways, front yards, and entry points with a single camera. Backyard & Garden Security: Cover large outdoor areas with 360° pan and motion tracking, eliminating blind spots that fixed cameras miss. Rental Properties & Airbnb: Monitor outdoor common areas and entry points remotely via the Tapo app, with instant alerts for unexpected activity. Small Business Exteriors: Protect car parks, loading docks, and building perimeters with AI vehicle and person detection and two-way audio deterrence. Holiday Homes & Remote Properties: Keep an eye on unoccupied properties from anywhere via the Tapo app, with local MicroSD recording even when internet connectivity is intermittent. Technical Specifications Specification Detail Model TC93D Kit Resolution 2K QHD — 2560×1440 pixels Pan / Tilt Range 360° horizontal / 130° vertical Night Vision Colour night vision with built-in spotlight IP Rating IP66 (weatherproof) AI Detection Person detection, vehicle detection, motion detection Motion Tracking Yes — automatic pan/tilt follow Audio Two-way audio (built-in mic & speaker) Local Storage MicroSD card slot (up to 512 GB) — SD card not included Cloud Storage Optional — Tapo Care subscription Wi-Fi 2.4 GHz 802.11b/g/n Voice Assistant Amazon Alexa, Google Home App Tapo (iOS & Android) Power DC 12V via included power adapter Operating Temperature -30°C to 60°C Mounting Wall or ceiling mount (hardware included) Certifications RCM (Australia), CE, RoHS Official Product Video See the Tapo TC93D in action, including setup and outdoor installation tips: Watch Tapo TC93D Videos on YouTube Recommended Accessories & Compatible Products MicroSD Card (Class 10 / U3, up to 512 GB): Required for local recording — not included with this kit. Purchase separately to enable on-device storage. Tapo TC50 Indoor Starter Kit: Complement your outdoor TC93D with indoor coverage using the Tapo TC50 — also available as a starter kit Tapo TC43 Indoor Pan/Tilt Camera: Add 2K indoor pan/tilt coverage to complete your home security setup Tapo H200 Smart Hub: Expand into a full smart home security system with Tapo door sensors, motion sensors, and sirens TP-Link Deco Mesh Wi-Fi System: Ensure strong 2.4 GHz Wi-Fi coverage reaches your outdoor mounting location for reliable connectivity Downloads Tapo TC93D Datasheet & User Guide (TP-Link Australia) Frequently Asked Questions Does the TC93D Starter Kit include a MicroSD card? No. This kit does not include an SD card. A MicroSD card (Class 10 / U3, up to 512 GB) is required for local video recording and must be purchased separately. The camera has a built-in MicroSD card slot ready to accept one. Is the TC93D truly weatherproof for Australian outdoor conditions? Yes. The TC93D carries an IP66 rating, meaning it is fully protected against dust ingress and powerful water jets. With an operating temperature range of -30°C to 60°C, it is well-suited to Australian conditions from alpine winters to outback summers. It is designed for permanent outdoor installation. What is the difference between person detection and motion detection? Motion detection triggers an alert whenever any movement is detected in the camera's field of view — including trees, animals, or passing cars. AI person detection specifically identifies human figures and vehicle detection identifies cars and other vehicles, significantly reducing false alerts from irrelevant movement. Person and vehicle detection are available via the Tapo app, with advanced features accessible through a Tapo Care subscription. How does motion tracking work? When motion tracking is enabled, the TC93D automatically pans and tilts to follow a detected moving subject across its 360° horizontal and 130° vertical range. This ensures the camera stays focused on the subject rather than losing them at the edge of a fixed field of view. Does the TC93D require a subscription to record video? No subscription is required, but you will need to purchase a MicroSD card separately to enable local recording. An optional Tapo Care subscription adds cloud storage, extended video history, and enhanced AI detection features if required. How far does the Wi-Fi signal need to reach the TC93D? The TC93D connects via 2.4 GHz Wi-Fi, which has better wall and obstacle penetration than 5 GHz. For reliable outdoor connectivity, ensure your router or mesh Wi-Fi system provides adequate 2.4 GHz signal at the mounting location. A TP-Link Deco mesh system can help extend coverage to outdoor areas that are beyond the range of a single router.

Read more less

TP-Link Tapo TC80 KIT Solar-Powered Wire-Free Security Camera – 1080P Colour Night Vision Overview The TP-Link Tapo TC80 KIT is the ultimate wire-free outdoor security camera for Australian homes and businesses. Combining a high-capacity 5,200mAh battery with a high-efficiency modular solar panel, it runs indefinitely on as little as 45 minutes of daily sunlight — no power cables, no ladder climbs to recharge. With 1080P Full HD video, full-colour night vision, subscription-free AI person detection, and an IP65 weatherproof rating, the TC80 KIT delivers professional-grade security anywhere you need it. Key Features Infinite Solar Power – Modular solar panel keeps the 5,200mAh battery topped up with just 45 minutes of daily sunlight; up to 180 days of battery life without sun. 1080P Full HD Video – Clear 2MP footage at 15fps with a wide 116° diagonal field of view. Full-Colour Night Vision – Dual built-in spotlights deliver high-fidelity colour detail at night, providing far better evidence than standard black-and-white infrared footage. Subscription-Free AI Person Detection – Smart AI accurately identifies people and sends instant alerts via the Tapo app — no monthly subscription required for core detection features. Two-Way Audio & Alarm – Built-in microphone and speaker for live communication; customisable sound and light alarm to deter intruders. Flexible Modular Solar Panel – Mount the panel directly on the camera or separately via the included extension cable to capture the best sun angle. IP65 Weatherproof – Rated for outdoor use in rain, dust, and harsh Australian conditions. Local & Cloud Storage – MicroSD slot supports up to 512GB; optional Tapo Care cloud storage also available. No Hub Required – Connects directly to your 2.4GHz Wi-Fi network via the Tapo app. Use Cases Homes and rental properties where running power cables is not practical Driveways, front doors, and backyards requiring wire-free outdoor monitoring Rural properties, farms, and remote sites with limited power access Construction sites and temporary installations needing portable security Sheds, garages, and outbuildings away from the main power supply Technical Specifications Specification Details Model Tapo TC80 KIT Resolution 1080P Full HD (2MP) @ 15fps Field of View 116° Diagonal / 99° Horizontal Night Vision Full-Colour (Spotlights) & 850nm IR (10m range) Battery Capacity 5,200mAh (Up to 180 days without sun) Power Source Solar Panel + Rechargeable Battery Connectivity 2.4GHz Wi-Fi (No Hub Required) Storage MicroSD up to 512GB & Tapo Care Cloud Weatherproof Rating IP65 AI Detection Person Detection (Subscription-Free) Audio Two-Way Audio with Built-In Mic & Speaker App Tapo (iOS & Android) Setup Guide Technical Resources TP-Link Tapo TC80 KIT Official Datasheet Frequently Asked Questions How much sunlight does the TC80 KIT need to stay charged? The TC80 KIT requires as little as 45 minutes of direct sunlight per day to maintain the battery under normal usage conditions. The 5,200mAh battery can also sustain the camera for up to 180 days without any solar input, making it suitable for shaded or low-sun locations. Does the TC80 KIT require a subscription for AI person detection? No. Core AI person detection is included free of charge via the Tapo app. Optional Tapo Care cloud storage plans are available for extended video history and additional features, but are not required for basic detection and alerts. Can I use a MicroSD card for local storage? Yes. The TC80 KIT includes a MicroSD card slot supporting cards up to 512GB for local on-device recording. This means footage is stored locally even without an internet connection or cloud subscription. Is the TC80 KIT suitable for Australian outdoor conditions? Yes. The TC80 KIT carries an IP65 weatherproof rating, making it resistant to rain, dust, and the harsh outdoor conditions common across Australia — from coastal humidity to outback heat. Does the solar panel need to be mounted on the camera? No. The modular solar panel can be mounted directly on the camera body or separately using the included extension cable. This allows you to position the panel at the optimal sun angle independently of the camera’s viewing direction. Does the TC80 KIT require a hub or base station? No. The TC80 KIT connects directly to your 2.4GHz Wi-Fi network via the Tapo app. No additional hub, base station, or bridge is required. Installation Tip: For best solar performance, mount the panel facing north (in Australia) at an angle that maximises direct sunlight exposure throughout the day. Avoid shaded locations such as under eaves or near trees where possible.

Read more less

Keep Your Tapo Battery Cameras Charged Year-Round with Solar Power The TP-Link Tapo A200 is a 4.5W monocrystalline solar panel designed to provide continuous, free solar charging for compatible Tapo battery-powered cameras — eliminating the need to manually recharge or replace batteries. With IP65 weatherproofing, a 4-metre charging cable, and a 360° adjustable mounting bracket, it's a practical, set-and-forget power solution for outdoor Tapo cameras across Australia — from sunny Queensland to overcast southern states. Key Features 4.5W Monocrystalline Solar Charging: Premium monocrystalline silicon cells deliver up to 4.5W of charging power — as little as 30 minutes of standard sunlight per day can keep compatible Tapo battery cameras running continuously. Compatible with Tapo Battery Cameras: Designed for use with the Tapo C425, Tapo C420, and Tapo C400 — connects directly to the camera's charging port via the included cable. IP65 Weatherproof: Fully dust-tight and protected against water jets — suitable for permanent outdoor installation in Australian conditions including rain, coastal humidity, and dust. 4-Metre Charging Cable: The generous 4m cable provides flexibility in positioning the solar panel for optimal sun exposure without being constrained by the camera's location. 360° Adjustable Mounting Bracket: Fully adjustable bracket allows you to angle the panel precisely towards the sun regardless of wall or roof orientation — maximising solar capture throughout the year as the sun's angle changes. Wall or Roof Mountable: Installs on any exterior wall, eave, or roof surface using the included mounting hardware. Set and Forget: Once installed and connected, the solar panel charges the camera automatically — no manual battery removal, charging, or replacement required. Common Use Cases Keeping Tapo C425, C420, or C400 cameras continuously charged without manual battery maintenance Remote or hard-to-access camera locations where battery replacement is inconvenient Off-grid properties, farms, and rural locations without mains power at the camera location Outdoor cameras on fences, sheds, and outbuildings where running power cable is impractical Reducing battery replacement costs and environmental impact for long-term outdoor deployments Technical Specifications Model Tapo A200 Solar Cell Type Monocrystalline silicon Max Charging Power Up to 4.5W Compatible Cameras Tapo C425, Tapo C420, Tapo C400 Charging Cable Length 4 metres Weatherproof Rating IP65 Mounting Bracket 360° adjustable Mounting Surface Wall or roof (hardware included) Weight 840g Downloads Tapo A200 Datasheet (PDF) Frequently Asked Questions Which Tapo cameras is the A200 compatible with? The Tapo A200 is compatible with the Tapo C425, Tapo C420, and Tapo C400 battery-powered cameras. It connects directly to the camera's charging port via the included 4-metre cable. TP-Link has indicated that additional camera models may be supported in future firmware updates — check the Tapo app or TP-Link's website for the latest compatibility list. How much sunlight does it need to keep the camera charged? Under standard sunlight conditions, as little as 30 minutes of direct sunlight per day is sufficient to keep a compatible Tapo battery camera running continuously. In practice, most Australian locations receive significantly more than this, making the A200 well-suited to year-round outdoor use across all states and territories. Will it work on cloudy or overcast days? Monocrystalline solar panels continue to generate power in overcast conditions, though at reduced efficiency compared to direct sunlight. In consistently overcast climates or heavily shaded locations, the panel may not generate sufficient power to fully offset the camera's consumption. For best results, position the panel in a location with maximum daily sun exposure using the 360° adjustable bracket. Can I use it with Tapo cameras that are not battery-powered? No. The Tapo A200 is designed specifically for Tapo battery-powered cameras (C425, C420, C400) and connects to their charging port. It is not compatible with mains-powered or PoE-powered Tapo cameras. Is the 4-metre cable long enough for most installations? For most residential installations, 4 metres provides sufficient reach to position the solar panel in an optimal sun-facing location while the camera monitors the desired area. If a longer run is required, the solar panel should be positioned as close as practical to the camera to avoid cable extension, which is not supported.

Read more less

TP-Link Tapo TC90 — Wire-Free Indoor/Outdoor Security Camera Kit The TP-Link Tapo TC90 is a wire-free security camera kit designed for flexible, cable-free installation anywhere around your home or small business. With 2K resolution, full-colour night vision, built-in AI detection, and a rechargeable battery, the TC90 delivers professional-grade surveillance without the hassle of running power cables. Mount it indoors or outdoors, connect it to the Tapo app in minutes, and keep an eye on what matters most — from anywhere in Australia. Key Features 2K QHD Resolution — Crisp 2560×1440 video captures fine details such as faces, number plates, and package labels with clarity. Full-Colour Night Vision — Built-in colour night vision delivers vivid, full-colour footage in low-light conditions, not just black-and-white infrared. Wire-Free Design — Rechargeable battery eliminates the need for power cables, enabling truly flexible placement indoors and outdoors. AI-Powered Detection — Intelligent person, vehicle, and pet detection reduces false alerts from wind, animals, and passing headlights. IP65 Weatherproof Rating — Dust-tight and rain-resistant construction suitable for Australian outdoor conditions year-round. Two-Way Audio — Built-in microphone and speaker allow you to hear and speak to visitors or deter intruders remotely via the Tapo app. Local & Cloud Storage — Supports microSD card storage (up to 512 GB) for local recording, plus optional Tapo Care cloud storage subscription for remote access to footage. Instant Motion Alerts — Receive real-time push notifications on your smartphone when motion or AI events are detected. Easy App Setup — The Tapo app (iOS & Android) guides you through setup in minutes with no technical knowledge required. Solar Panel Compatible — Supports optional Tapo A200 solar panel accessory for continuous trickle charging, reducing the need for manual battery recharging. Use Cases Front Door & Entryway Monitoring — Keep watch over your front door, driveway, or gate with wire-free flexibility and instant motion alerts. Backyard & Garden Surveillance — Monitor outdoor areas without running power cables across your property. Rental Properties & Airbnb — Install and relocate cameras easily between properties without permanent wiring. Garage & Shed Security — Protect outbuildings and vehicles with weatherproof, battery-powered surveillance. Indoor Baby & Pet Monitoring — Use indoors to keep an eye on children, pets, or elderly family members with two-way audio and clear 2K video. Small Business & Retail — Supplement existing security systems with flexible, no-drill camera placement in hard-to-wire locations. Technical Specifications Specification Details Video Resolution 2K QHD (2560×1440) Field of View 130° Wide Angle Night Vision Full-Colour Night Vision Power Source Rechargeable Battery (solar panel compatible via Tapo A200) Weatherproofing IP65 Audio Two-Way Audio (built-in mic & speaker) Local Storage microSD card up to 512 GB (not included) Cloud Storage Optional Tapo Care subscription AI Detection Person, Vehicle, Pet Detection Wi-Fi 2.4 GHz 802.11b/g/n Management Tapo App (iOS & Android) Voice Assistant Amazon Alexa, Google Assistant compatible Operating Temperature -20°C to 45°C Warranty 1 Years (TP-Link Australia) Recommended Accessories Tapo A200 Solar Panel — Keep your TC90 continuously charged with trickle solar power, eliminating the need for manual battery recharging in outdoor locations with adequate sunlight. microSD Card (Class 10 / U3, up to 512 GB) — Add local storage for continuous or event-based recording without a cloud subscription. TP-Link Tapo C420S2 — Wire-free 2K QHD outdoor security camera 2-pack for expanding your wire-free camera system. TP-Link Deco XE75 Mesh System — Extend strong 2.4 GHz Wi-Fi coverage to outdoor areas to ensure reliable camera connectivity across your property. Downloads Tapo TC90 Datasheet & Specifications (TP-Link AU) Firmware & Quick Installation Guide Downloads Frequently Asked Questions How long does the TC90 battery last on a single charge? Battery life varies depending on usage, motion event frequency, temperature, and video settings. In typical conditions with moderate motion activity, the TC90 battery is designed to last several months on a single charge. For continuous outdoor use, pairing with the Tapo A200 solar panel is strongly recommended to maintain charge without manual intervention. Does the TC90 record continuously or only on motion? To preserve battery life, the TC90 defaults to event-based recording, capturing footage when motion or AI detection events are triggered. Continuous recording is available when the camera is connected to a power source or paired with a solar panel, and a microSD card is inserted. Is the TC90 suitable for Australian outdoor conditions? Yes. The TC90 carries an IP65 weatherproof rating, making it dust-tight and protected against water jets from any direction. It operates across a temperature range of -20°C to 45°C, covering Australia’s diverse climates from tropical north Queensland to alpine Victoria. Does the TC90 require a subscription for cloud storage? No subscription is required to use the TC90. Local storage via a microSD card (up to 512 GB, sold separately) is available at no ongoing cost. The optional Tapo Care cloud storage subscription provides additional benefits including cloud video history, advanced AI detection features, and remote access to recorded footage without a local card. Can I view TC90 footage without the Tapo app? The Tapo app is the primary method for live viewing, playback, and camera management. If you have a Tapo Care subscription, footage can also be accessed via the Tapo web portal at home.tp-link.com. Local microSD recordings can be accessed directly by removing the card and reading it on a computer. Is the TC90 compatible with Amazon Alexa and Google Home? Yes. The Tapo TC90 is compatible with Amazon Alexa and Google Assistant, allowing you to view live camera feeds on Alexa Show, Google Nest Hub, or other smart displays using voice commands.

Read more less

TP-Link Tapo DL105 — Smart Door Lock with Fingerprint, PIN, Card & App Access The TP-Link Tapo DL105 is a feature-rich smart door lock that replaces your existing deadbolt with a modern, keyless entry solution. Supporting five convenient unlock methods — fingerprint, PIN code, RFID card, physical key, and the Tapo app — the DL105 gives you and your household complete flexibility in how you access your home. With auto-lock, access logs, remote control via the Tapo app, and a straightforward DIY installation process, the DL105 is the smart upgrade Australian homeowners and renters have been waiting for. Key Features 5 Unlock Methods — Fingerprint, PIN code, RFID card, physical key, and Tapo app (via Bluetooth or Wi-Fi with Tapo Hub) for maximum flexibility. Fast Fingerprint Recognition — Stores up to 100 fingerprints with rapid biometric recognition for quick, hands-free entry. Auto-Lock Function — Automatically locks the door after a configurable delay, so you never have to worry about leaving the door unlocked. Tamper & Intrusion Alerts — Triggers an audible alarm and sends push notifications to your phone if tampering, forced entry, or incorrect PIN attempts are detected. Access Logs & History — View a full log of who entered and when, directly in the Tapo app, for complete visibility over your home access. Temporary & Scheduled Access Codes — Create time-limited PIN codes for guests, cleaners, or tradespeople without handing over a physical key. Low Battery Warning — Alerts you via the Tapo app when battery levels are low, and an emergency power port allows external battery charging if the battery is fully depleted. Privacy Mode — Physical indoor thumb-turn prevents the lock from being operated externally for added security when you’re home. DIY Installation — Designed to fit standard Australian door preparations with no specialist tools required. Replaces most existing deadbolts in under 30 minutes. Tapo App Integration — Manage access, view logs, set schedules, and receive alerts from anywhere via the Tapo app (iOS & Android). Voice Assistant Compatible — Works with Amazon Alexa and Google Assistant for voice-controlled locking and status checks. Use Cases Family Homes — Give each family member their own fingerprint or PIN code, eliminating the need to carry or copy physical keys. Rental Properties & Airbnb — Issue temporary PIN codes to guests and cleaners that expire automatically, then reset between stays without rekeying. Home Offices — Grant time-limited access to couriers, tradespeople, or clients without being physically present to let them in. Elderly & Accessibility — Fingerprint and PIN access removes the need to fumble with keys, making entry easier for elderly family members or those with limited dexterity. Smart Home Integration — Pair with other Tapo smart home devices for automated routines such as turning on lights when the door is unlocked. Technical Specifications Specification Details Unlock Methods Fingerprint, PIN Code, RFID Card, Physical Key, Tapo App Fingerprint Capacity Up to 100 fingerprints PIN Code Capacity Up to 100 PIN codes (4–8 digits) RFID Card Capacity Up to 100 cards Connectivity Bluetooth 5.0; Wi-Fi via Tapo Hub (sold separately) Power Source 4× AA Batteries (included) Battery Life Up to 6 months (typical use) Emergency Power External USB-C emergency charging port Auto-Lock Yes (configurable delay) Tamper Alarm Yes (audible alarm + app notification) Door Thickness 35–100 mm Backset 60 mm / 70 mm (adjustable) Material Zinc Alloy Body Management Tapo App (iOS & Android) Voice Assistant Amazon Alexa, Google Assistant (via Tapo Hub) Operating Temperature -20°C to 50°C Warranty 2 Years (TP-Link Australia) Recommended Accessories Tapo H200 Smart Hub — Required for remote Wi-Fi control and automation of the DL105 when you’re away from home via the Tapo app. Tapo TC90 Wire-Free Security Camera — Pair with the DL105 for a complete front-door security solution with video monitoring and smart lock control. Tapo D230S1 Video Doorbell — See and speak to visitors before unlocking the DL105 remotely via the Tapo app. AA Alkaline Batteries (4-Pack) — Keep a spare set on hand for battery replacement. Alkaline batteries are recommended for optimal performance and battery life. Downloads Tapo DL105 Datasheet & Specifications (TP-Link AU) Firmware & Quick Installation Guide Downloads Frequently Asked Questions Does the Tapo DL105 work without Wi-Fi? Yes. The DL105 operates via Bluetooth 5.0 and works fully offline for fingerprint, PIN, RFID card, and physical key access without any Wi-Fi or internet connection. Remote access and control via the Tapo app when you’re away from home requires the Tapo H200 Smart Hub (sold separately) connected to your home Wi-Fi. Is the Tapo DL105 compatible with Australian door preparations? Yes. The DL105 supports door thicknesses of 35–100 mm and an adjustable backset of 60 mm or 70 mm, covering the most common Australian residential door preparations. It is designed to replace standard deadbolts without requiring additional drilling in most cases. Always measure your existing door preparation before purchasing. How do I let in a guest or tradie when I’m not home? You can create a temporary or scheduled PIN code in the Tapo app and share it with your guest or tradie. The code can be set to expire automatically after a specific date and time, or after a single use, so you don’t need to worry about revoking access manually afterwards. What happens if the battery runs out? The Tapo app sends low battery alerts well in advance. If the battery is fully depleted, the DL105 features a USB-C emergency power port on the exterior of the lock. Holding a USB-C power bank against this port provides enough temporary power to unlock the door and replace the batteries. Can I still use a physical key with the DL105? Yes. The DL105 includes a physical key cylinder and two keys as a backup unlock method. This ensures you always have a mechanical fallback option regardless of battery level, connectivity, or app availability. Does the DL105 lock automatically? Yes. The auto-lock feature can be enabled and configured in the Tapo app to automatically lock the door after a delay of your choosing (typically 10 seconds to several minutes) after it has been unlocked. This ensures the door is never accidentally left unlocked.

Read more less

TP-Link Tapo H500 — Matter Smart Hub with Colour Display The TP-Link Tapo H500 is a Matter-certified smart home hub with a built-in colour display, bringing together your Tapo smart home devices, Zigbee accessories, Matter devices, and Thread endpoints under a single, unified platform. Whether you’re building a new smart home from scratch or expanding an existing setup, the H500 acts as the central controller — enabling remote access, automation routines, and real-time status monitoring from its on-device display or the Tapo app. It’s the smart home hub Australian households need to future-proof their connected home. Key Features Matter Certified — Natively supports the Matter smart home standard for broad compatibility with Apple Home, Google Home, Amazon Alexa, and Samsung SmartThings ecosystems. Zigbee Coordinator — Acts as a Zigbee hub, enabling direct pairing and control of Zigbee-based smart home devices without a separate Zigbee bridge. Thread Border Router — Supports the Thread mesh networking protocol for low-latency, self-healing smart home device communication. Built-In Colour Display — On-device colour touchscreen displays real-time device status, weather, time, and quick controls without needing to open the app. Wi-Fi & Ethernet Connectivity — Connects to your home network via 2.4 GHz Wi-Fi or wired Ethernet for a stable, always-on hub connection. Remote Access & Automation — Control and automate all connected Tapo and Matter devices remotely via the Tapo app (iOS & Android) from anywhere with an internet connection. Multi-Ecosystem Compatible — Works as a Matter controller and bridge, enabling Tapo devices to appear natively in Apple Home, Google Home, and Amazon Alexa. Tapo Smart Home Integration — Pairs with the full range of Tapo smart plugs, bulbs, sensors, cameras, door locks, and other accessories for a complete smart home ecosystem. Easy Setup — Set up in minutes via the Tapo app with guided onboarding for all connected device types. Use Cases Central Smart Home Controller — Use the H500 as the single hub for all Tapo, Zigbee, Matter, and Thread devices in your home, managed from one app or display. Remote Access for Tapo Devices — Enable remote control of Tapo smart locks, cameras, plugs, and sensors when away from home — including the Tapo DL105 smart door lock. Apple Home & Google Home Integration — Bridge your Tapo devices into Apple Home or Google Home via Matter for native voice and app control within your preferred ecosystem. Home Automation Routines — Create automated routines such as turning off all lights when the door locks, or activating security cameras when motion is detected. Zigbee Device Management — Pair and manage Zigbee smart home accessories directly through the H500 without purchasing a separate Zigbee coordinator. Rental Properties & Airbnb — Centralise smart lock, camera, and sensor management for short-stay properties from a single hub and app. Technical Specifications Specification Details Smart Home Standards Matter, Zigbee 3.0, Thread Matter Role Matter Controller & Bridge Thread Role Thread Border Router Zigbee Role Zigbee Coordinator Display Built-in Colour Touchscreen Wi-Fi 2.4 GHz 802.11b/g/n Ethernet Port 1× 10/100 Mbps RJ45 Bluetooth Bluetooth 5.0 (for device onboarding) Power Supply DC 5V/2A (power adapter included) Ecosystem Compatibility Apple Home, Google Home, Amazon Alexa, Samsung SmartThings (via Matter) Management Tapo App (iOS & Android), On-Device Display Operating Temperature 0°C to 40°C Warranty 2 Years (TP-Link Australia) Recommended Accessories Tapo DL105 Smart Door Lock — Pair with the H500 for remote locking, unlocking, and access log monitoring from anywhere via the Tapo app. Tapo TC90 Wire-Free Security Camera — Add wire-free 2K outdoor camera coverage to your H500-managed smart home network. Tapo D230S1 Video Doorbell — See and speak to visitors at your door and trigger smart home automations via the H500 hub. Tapo T315 Smart Temperature & Humidity Sensor — Monitor indoor climate conditions and trigger automations based on temperature or humidity thresholds via the H500. Tapo P115 Smart Plug with Energy Monitoring — Control and schedule appliances remotely and monitor energy usage through the H500 and Tapo app. Downloads Tapo H500 Datasheet & Specifications (TP-Link AU) Firmware & Quick Installation Guide Downloads Frequently Asked Questions What is Matter and why does it matter for my smart home? Matter is an open, royalty-free smart home connectivity standard developed by Apple, Google, Amazon, Samsung, and others. It ensures that smart home devices from different brands work together reliably without proprietary bridges or workarounds. The Tapo H500 is Matter-certified, meaning it can control Matter devices from any brand and bridge Tapo devices into Apple Home, Google Home, and Amazon Alexa natively — giving you true cross-ecosystem flexibility. Do I need the Tapo H500 to use Tapo smart home devices? Not for basic local control. Many Tapo devices connect directly to your Wi-Fi and can be controlled via the Tapo app without a hub. However, the H500 is required for remote access to Tapo devices that use Bluetooth or Zigbee (such as the Tapo DL105 smart lock), for Zigbee device pairing, for Thread Border Router functionality, and for Matter bridging into Apple Home or Google Home. Can the H500 control Zigbee devices from other brands? Yes. The H500 acts as a Zigbee 3.0 coordinator and can pair with Zigbee-compatible devices from other brands, not just TP-Link Tapo products. Compatibility may vary by device and firmware version — check the TP-Link compatibility list for confirmed third-party Zigbee device support. Does the H500 work with Apple Home? Yes. The H500 is Matter-certified and can act as a Matter bridge, making compatible Tapo devices appear natively in the Apple Home app on iPhone, iPad, and Mac. This allows you to control Tapo devices using Siri, Apple Home automations, and the Home app without leaving the Apple ecosystem. Does the H500 need to be connected via Ethernet or can it use Wi-Fi? The H500 supports both 2.4 GHz Wi-Fi and wired Ethernet connection. For the most reliable hub performance — particularly for Thread Border Router and Zigbee coordinator functions — a wired Ethernet connection is recommended where possible, as it eliminates potential Wi-Fi interference or dropouts that could affect hub responsiveness. How many devices can the H500 manage? The H500 can manage a large number of Tapo, Zigbee, Matter, and Thread devices simultaneously. For specific device limits by protocol, refer to the TP-Link AU product page or the Tapo app documentation, as supported device counts may be updated via firmware.

Read more less

The most complete solution for the garage of your smart home. Integrates with Apple HomeKit, Google Home natively, Samsung SmartThings and Amazon Alexa through iFTTT. Remotely control, monitor and watch your garage door from anywhere from your Smartphone. Includes the ismartgate PRO device, waterproof wireless garage door sensor and wireless indoor IP camera with night vision. 1 YEAR FREE VIDEO PLUGIN INCLUDED!Check if this is the right kit for me > Up to 3 x Garage DoorsNotes: Use Gate Ultimate Kit for Roller Garage Doors. In the box 1 x ismartgate PRO controller 3 x peeled connection cables 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless tilt sensor (for garage door) 2 x Type-N 1.5V batteries (for sensor) 1 x Wireless Indoor IP Camera 1 x USB Cable (2m) 1 x USB Power adaptor 1 x Quick Start Guide 1 x Support CD 3 x Mounting screws 1 x Ethernet Cable 1 x Warranty Card Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 3, to control up to 3 doors/ gates Dry contact inputs: 3, to connect up to 3 wired sensors Speaker: Play your music when door is moving Light: Dual LED USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Gravity sensor Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Resolution: 1920x1080 pixels (1080p) Image: HD Color CMOS sensor Night Vision: Yes (8m) Motion Sensor: Yes Two-Way Audio: Yes (from App or web client) Wi-Fi: 802.11 b/g/n (2.4Ghz) - 802.11 ac/a/n (5Ghz) Ethernet: RJ45 output Storage: 1x micro SD card slot (max. 32GB) View Angle: 103º D / 99º H Operating Tempº: -10ºC / +40ºC (14ºF / 104ºF) Operating Humidity: 30%-85% Power Supply: 100-240V to 5V1A Waterproof: NO Dimensions: 70(L)x70(W)x120(H) mm Weight: 165g Features HomeKit Compatible (voice control) The most complete garage door controller compatible with HomeKit. Integrate your garage in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate PRO integrates with a Google eco-system too. Make your garage part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate PRO is compatible with iFTTT (visit GarageWifi & Gates channel) for free. Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your garage with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your garage door remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when door is open, closed or left open on your Smartphone or via email. The garage kit also monitors your garage temperature and sensor's battery condition. With HomeKit, you will receive alerts when door is stopped. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, door and location. 10 users for free. Control 3 gates with 1 device One iSmartgate PRO device can control a combination of up to 3 garage doors or gates. The ismartgate app can control unlimited devices and doors. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. Audio player ismartgate PRO includes audio. Add your preferred music or tone and ismartgate PRO will play it when your are coming or leaving home. LED light ismartgate PRO includes two powerful LED lights to provide extra illumination when parking home. These lights will activate when system is used remotely too. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate PRO only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate PRO will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate PRO will open and close your garage automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night! CAM - HD resolution (HD) Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Night Vision Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Wide Angle Diagonal angle of 116º for a panoramic view of your garage. Feature available with ismartgate controllers (PRO/LITE).

Read more less

The most complete solution for the gate of your smart home. Integrates with Apple HomeKit, Google Home natively, Samsung SmartThings and Amazon Alexa through iFTTT. Remotely control, monitor and watch your automatic gate from anywhere from your Smartphone. Includes the ismartgate PRO device, waterproof wireless gate sensor and wireless outdoor IP camera with night vision and motion detection. 1 YEAR FREE VIDEO PLUGIN INCLUDED!Check if this is the right kit for me > In the box 1 x ismartgate PRO controller 3 x peeled connection cables 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless magnetic sensor (for gates and roller doors) 1 x Magnet (for sensor) 2 x Type-N 1.5V batteries (for sensor) 1 x Wireless Outdoor IP Camera 1 x Wireless Outdoor IP Camera 1 x Power adaptor 1 x Quick Start Guide 1 x Support CD 3 x Mounting screws 1 x Ethernet Cable 1 x Warranty Card 1 x Allen wrench Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 3, to control up to 3 doors/ gates Dry contact inputs: 3, to connect up to 3 wired sensors Speaker: Play your music when door is moving Light: Dual LED USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Magnet Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Resolution: 1920x1080 pixels (1080p) Image: HD Color CMOS sensor Night Vision: Yes (20m) Motion Sensor: Yes Two-Way Audio: No. External RCA interface for two-way audio Wi-Fi: 802.11 b/g/n (2.4Ghz) Ethernet: RJ45 output Storage: 1x micro SD card slot (max. 32GB) View Angle: 105º D / 90º H Operating Tempº: -20ºC / +60ºC (-4ºF / 104ºF) Operating Humidity: 0%-90% Power Supply: 100-240V to 12V1A Waterproof: Yes (IP66 enclosure) Dimensions: 98(L)x65(W)x62(H) mm Weight: 350g Apple HomeKit Compatible (voice control) The most complete gate controller compatible with HomeKit. Integrate your gate in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate PRO integrates with a Google eco-system too. Make your gate part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate PRO is compatible with iFTTT (visit GarageWifi & Gates channel) for free. Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your gate with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your gate remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when gate is open, closed or left open on your Smartphone or via email. The gate kit also monitors your gate temperature and sensor's battery condition. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, gate and location. 10 users for free. Control 3 gates with 1 device One ismartgate PRO device can control a combination of up to 3 garage doors or gates. The ismartgate app can control unlimited devices and doors. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. Audio player ismartgate PRO includes audio. Add your preferred music or tone and iSmartgate PRO will play it when your are coming or leaving home. LED light ismartgate PRO includes two powerful LED lights to provide extra illumination when parking home. These lights will activate when system is used remotely too. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate PRO only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate PRO will open and close your gate automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. New wireless gate sensor ismartgate PRO kit gate includes a new waterproof wireless sensor to monitor the status of your gate. The device is compatible with wired sensors too! Time to close ismartgate PRO will open and close your gate automatically at a given time thanks to iFTTT, so you do not wonder if you closed the property at night! CAM - HD resolution (HD) Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Night Vision Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE).

Read more less

The most complete solution for the garage of your smart home. Integrates with Apple HomeKit, Google Home natively, Samsung SmartThings and Amazon Alexa through iFTTT. Remotely control, monitor and watch your garage door from anywhere from your Smartphone. Includes the ismartgate LITE device, waterproof wireless garage door sensor and wireless indoor IP camera with night vision. 1 YEAR FREE VIDEO PLUGIN INCLUDED!Check if this is the right kit for me > Only for 1 garage door control.Notes: Use Gate Kit for Roller Garage Doors. In the box 1 x ismartgate LITE controller 1 x peeled connection cable 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless tilt sensor (for garage door) 2 x Type-N 1.5V batteries (for sensor) 1 x Wireless Indoor IP Camera 1 x USB Cable (2m) 1 x Power adaptor 1 x Quick Start Guide 1 x Support CD 3 x Mounting screws 1 x Ethernet Cable 1 x Warranty Card Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1, to control 1 door/ gate Dry contact inputs: 0, no wired sensor supported Speaker: Not included Light: Not included USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Gravity sensor Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Resolution: 1920x1080 pixels (1080p) Image: HD Color CMOS sensor Night Vision: Yes (8m) Motion Sensor: Yes Two-Way Audio: Yes (from App or web client) Wi-Fi: 802.11 b/g/n (2.4Ghz) - 802.11 ac/a/n (5Ghz) Ethernet: RJ45 output Storage: 1x micro SD card slot (max. 32GB) View Angle: 103º D / 99º H Operating Tempº: -10ºC / +40ºC (14ºF / 104ºF) Operating Humidity: 30%-85% Power Supply: 100-240V to 5V1A Waterproof: NO Dimensions: 70(L)x70(W)x120(H) mm Weight: 165g HomeKit Compatible (voice control) A cost-effective garage door controller compatible with HomeKit. Integrate your garage in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate LITE also integrates with a Google eco-system. Make your garage part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate LITE is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your garage with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your garage door remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when door is open, closed or left open on your Smartphone or via email. The garage kit also monitors your garage temperature and sensor's battery condition. With HomeKit, you will receive alerts when door is stopped. Video monitoring (optional) Watch and record events in your garage remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, door and location. 10 users for free. ONLY 1 GATE ismartgate LITE garage kit will only control 1 door. For two or three doors garage, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Calendar of events Check what happens in your garage from the distance with a built-in calendar of events. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate LITE only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate LITE will open and close your garage automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate LITE will open and close your garage automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night! CAM - HD resolution (HD) Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Night Vision Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Wide Angle Diagonal angle of 116º for a panoramic view of your garage. Feature available with ismartgate controllers (PRO/LITE).

Read more less

The most complete solution for the gate of your smart home. Integrates with Apple HomeKit, Google Home natively, Samsung SmartThings and Amazon Alexa through iFTTT. Remotely control, monitor and watch your roller door and gate from anywhere from your Smartphone. Includes the ismartgate LITE device, waterproof wireless magnetic sensor and waterproof wireless outdoor IP camera with night vision. 1 YEAR FREE VIDEO PLUGIN INCLUDED!Check if this is the right kit for me > In the box 1 x ismartgate LITE controller 1 x peeled connection cable 1 x Power supply 2 x Double sided tape 1 x Quick Start Guide 1 x Waterproof Wireless magnetic sensor (for gates and roller doors) 1 x Magnet (for sensor) 2 x Type-N 1.5V batteries (for sensor) 1 x Wireless Outdoor IP Camera 1 x Power adaptor 1 x Quick Start Guide 1 x Support CD 3 x Mounting screws 1 x Ethernet Cable 1 x Warranty Card 1 x Allen wrench Specifications Wi-Fi 2.4Ghz (802.11 b/g/n) Relay outputs: 1, to control 1 door/ gate Dry contact inputs: 0, no wired sensor supported Speaker: Not included Light: Not included USB: type A System: 512Mhz CPU / 4GB eMMC / 128MB RAM Universal Power Supply: 110-240V AC (50-60 hz) to 5V2A DC Receiver: 2401 Mhz Transmitter:2401 Mhz Type: Magnet Temperature indicator: Included Range: 50 ft Operating temperature: -25ºC / 70ºC Batteries: 2x Type-N (1.5V) Life span: 18 months Waterproof: Yes Resolution: 1920x1080 pixels (1080p) Image: HD Color CMOS sensor Night Vision: Yes (20m) Motion Sensor: Yes Two-Way Audio: No. External RCA interface for two-way audio Wi-Fi: 802.11 b/g/n (2.4Ghz) Ethernet: RJ45 output Storage: 1x micro SD card slot (max. 32GB) View Angle: 105º D / 90º H Operating Tempº: -20ºC / +60ºC (-4ºF / 104ºF) Operating Humidity: 0%-90% Power Supply: 100-240V to 12V1A Waterproof: Yes (IP66 enclosure) Dimensions: 98(L)x65(W)x62(H) mm Weight: 350g Features HomeKit Compatible (voice control) A cost-effective gate controller compatible with HomeKit. Integrate your gate in an Apple eco-system through HomeKit and voice control with Siri. Google Home Compatible (voice control) ismartgate LITE also integrates with a Google eco-system. Make your gate part of a Google home and enjoy voice control with Google Assistant. SmartThings Compatible With SmartThings app you can control your ismargate device combined with other devices to automate your home. Open, close, check door status and create scenes. iFTTT Compatible (Free!) ismartgate LITE is compatible with iFTTT for free (visit GarageWifi & Gates channel). Integrate your ismartgate with Amazon Alexa through iFTTT, to enjoy voice control of your gate with Amazon devices. You can also create unlimited applets with both our new triggers and actions! Remote Access Open and close your gate remotely from an app or web-link. Internet conection required. Real time alerts Receive alerts when gate is open, closed or left open on your Smartphone or via email. The gate kit also monitors your garage temperature and sensor's battery condition. Video monitoring (optional) Watch and record events in your gate remotely from your phone, tablet or PC using the ismartgate app. Additional IP Camera required. User Management Grant and deny access to different users remotely. Restrict access by time, gate and location. 10 users for free. ONLY 1 GATE ismartgate LITE gate kit will only control 1 roller door or gate. For two or three gates/roller doors, we strongly recommend the use of our PRO version. The ismartgate app can control unlimited ismartgate devices. Calendar of events Check what happens in your gate from the distance with a built-in calendar of events. Multiplatform You can use and edit your ismartgate system from an app on your Smartphone (iOS/Android) or via web from your Tablet, Laptot or PC. Easy to install ismartgate LITE only requires a screwdriver and 20 minutes of your time. Easy to link with your Apple, Google or Amazon eco-system too! Automatic open/close ismartgate LITE will open and close your gate automatically thanks to iFTTT app and phone's GPS signal. No need to use remote controls or pull your phone from your pocket. Link to iFTTT instructions. Time to close ismartgate LITE will open and close your gate automatically at a given time thanks to iFTTT, so you do not wonder if you closed the garage at night! New wireless gate sensor ismartgate PRO kit gate includes a new waterproof wireless sensor to monitor the status of your gate. CAM - HD resolution (HD) Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE). CAM - Night Vision Watch video in High Definition (2MP) from the ismartgate Cam. Feature available with ismartgate controllers (PRO/LITE).

Read more less

Eve Water Guard · 1DEBZ8701 · Thread Water Leak Detector · 100 dB Siren · Apple HomeHomeKit Leak Detector Eve Water Guard 1DEBZ8701 — Smart Water Leak Detector (Thread) · Australian Stock & 2-Year Warranty The Eve Water Guard is a connected water leak detector that protects your home before a small drip becomes costly damage. A 2 m sensing cable detects water along its entire length — extendable up to 150 m — so the moment moisture is found under a sink, behind the washing machine or near the hot water system, Eve Water Guard sounds a 100 dB siren, flashes a red warning light and pushes an instant alert to your iPhone, iPad and Apple Watch. Built for Apple Home with Thread connectivity, it is mains-powered and always on, controlled through the Apple Home app, the Eve app and Siri. Detects Water Leaks Alarm 100 dB Siren Sensing Cable 2 m — to 150 m Alerts App + Siri Power Mains Works With Apple Home Full-length leak detection Unlike single-point sensors, the flexible sensing cable detects water anywhere along its length. Run it under sinks, behind appliances or across the laundry floor — a leak is caught the instant it touches any section. Loud siren, instant alerts When water is detected, a 100 dB siren sounds and a red warning light flashes on the unit. At the same time, push notifications reach your iPhone, iPad and Apple Watch so you can act fast — even away from home with an Apple hub. Extend to protect more Start with the included 2 m cable and add Eve Water Guard Cable Extension pieces to reach up to 150 m of coverage — ideal for larger laundries, plant rooms and multi-appliance areas. Apple Home with Thread Built for Apple Home over Thread for fast, reliable, low-power connectivity. Mains-powered and always on, it also acts as a Thread router to strengthen your smart home network. Set up in the Eve or Apple Home app — no Eve account required. Specifications — Eve Water Guard 1DEBZ8701 Model Eve Water Guard (Thread) · 1DEBZ8701 Function Connected water leak detector Sensing Cable 2 m (6.5 ft) included · extendable up to 150 m (490 ft) Detection Along entire cable length — alerts on contact with any section Alarm 100 dB siren + red flashing warning light Notifications iPhone, iPad, Apple Watch · away alerts with an Apple home hub Control Apple Home app, Eve app and Siri Connectivity Thread + Bluetooth (Full Thread Device / router node) Platform Apple Home (HomeKit) Home Hub HomePod, HomePod mini or Apple TV for remote alerts & automations Power Mains 100-240 V~, 50/60 Hz, 50 mA — always on Plug Australian Type I (AS 3112) adapter included Dimensions 65 × 65 × 45 mm (excl. plug) In the Box Eve Water Guard, interchangeable plug adapters, 2 m sensor cable, Quick Start Guide Use Indoor Warranty 2 years · CCTV Guru Australia Downloads Eve Water Guard Quick Start GuideEve Important Safety Guide Which smart home platforms does the Eve Water Guard work with?This Thread generation of Eve Water Guard is built for Apple Home. It is controlled through the Apple Home app, the Eve app and Siri on an iPhone, iPad or Apple Watch. It is not designed for Google Home or Amazon Alexa. How long is the sensing cable and can it be extended?A 2 m (6.5 ft) sensing cable is included in the box. It detects water along its entire length, and you can extend it up to 150 m (490 ft) using Eve Water Guard Cable Extension pieces to protect larger areas. How does it alert me to a leak?The moment water touches any part of the sensing cable, Eve Water Guard sounds a 100 dB siren and flashes a red warning light. It also sends push notifications to your iPhone, iPad and Apple Watch, and to you when away if you have an Apple home hub. Do I need an Apple TV or HomePod?Not for local alerts. A home hub (HomePod, HomePod mini or Apple TV) is required to receive notifications while you are away from home and to run automations. How is it powered?Eve Water Guard is mains-powered (100-240 V, 50/60 Hz) and plugs straight into a wall socket, so it is always on. An Australian Type I plug adapter is included in the box. Is it indoor or outdoor?Indoor only. Position it near common leak points such as under sinks, behind the washing machine, near the dishwasher, hot water system or in the laundry, and run the sensing cable along the floor. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Energy · 10ECF6051 · Matter over Thread · Smart Plug & Power MeterMatter Smart Plug Eve Energy 10ECF6051 — Matter Smart Plug & Power Meter · Australian Stock & 2-Year Warranty The Eve Energy is a Matter-over-Thread smart plug with a built-in power meter, so you can switch lights and appliances on and off by app or voice — and see exactly how much energy they use. Because it speaks Matter, a single Eve Energy works across Apple Home, Google Home, Amazon Alexa and Samsung SmartThings at the same time. It fits a standard Australian Type I socket, handles loads up to 10 A / 2300 W, and — being mains-powered and always on — doubles as a Thread router node that extends the range and reliability of your smart-home network. No Eve account, no subscription, and schedules can run locally on the device for rock-solid reliability. Max Load 10 A / 2300 W Metering Real-Time Energy Protocol Matter / Thread Control App · Voice · Schedule Works With Apple · Google · Alexa Socket AU Type I See what everything costs A built-in power meter tracks real-time watts and total energy use for the connected appliance, so you can find the power-hungry devices in your home and view consumption history in the Eve app. One plug, every platform Thanks to Matter, a single Eve Energy works across Apple Home, Google Home, Amazon Alexa and Samsung SmartThings — control it by app or by voice through Siri, Google Assistant or Alexa. Strengthens your Thread mesh Mains-powered and always on, Eve Energy is a Full Thread Device that acts as a router node — relaying data for your other Thread accessories and extending the range and stability of the network. Private by design No Eve account, no registration and no subscription. Schedules can run locally on the device, so lights and appliances switch on time even without an internet connection. Specifications — Eve Energy 10ECF6051 Model Eve Energy (Matter) · 10ECF6051 Type Smart plug with power / energy meter Connectivity Matter over Thread + Bluetooth LE (setup) Thread Role Full Thread Device (router node) Requires A Thread + Matter hub (Thread border router) Works With Apple Home, Google Home, Amazon Alexa, Samsung SmartThings Socket / Plug Australian Type I (AS 3112) Input AC 100–240 V, 50/60 Hz Maximum Load 10 A / 2300 W Energy Monitoring Real-time power & total consumption Control Eve app, voice assistants, on-device schedules, manual button Dimensions 77 × 77 × 60 mm Operating Temp. 0–35 °C Use Indoor only In the Box Eve Energy, Quick Start Guide Warranty 2 years · CCTV Guru Australia Downloads Eve Energy AU Quick Start GuideEve Important Safety Guide Do I need a hub to use Eve Energy?Yes. As a Matter-over-Thread device, Eve Energy needs a Thread border router that also supports Matter — for example a HomePod, Apple TV, Google Nest Hub (2nd gen) or Amazon Echo (4th gen). The hub lets you control the plug remotely and add it to automations. Which smart home platforms does it work with?Because it uses Matter, one Eve Energy works across Apple Home, Google Home, Amazon Alexa and Samsung SmartThings — even at the same time. Control it by app or by voice through Siri, Google Assistant or Alexa. What is the maximum load?Eve Energy is rated for a maximum load of 10 A / 2300 W on 240 V AU mains and fits a standard Australian Type I (AS 3112) socket. Do not exceed the rated load. Can it track power consumption?Yes. A built-in power meter measures real-time watts and total energy use of the connected appliance, so you can see exactly what a device costs to run and view the history in the Eve app. Does it improve my Thread network?Yes. Because it is mains-powered and always on, Eve Energy acts as a Full Thread Device (router node), relaying data for other Thread accessories and extending the range and stability of your mesh network. Is it indoor only, and does it need an Eve account?It is designed for indoor use. There is no Eve account, registration or subscription required — your data stays private, and scheduling can even run locally on the device. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Motion · 10EBY9951 · Matter over Thread · Wireless Motion & Light SensorMatter Motion Sensor Eve Motion 10EBY9951 — Matter Wireless Motion Sensor · Australian Stock & 2-Year Warranty Let movement bring your home to life. The Eve Motion is a battery-powered Matter-over-Thread motion sensor with a 120° field of view and 9 m range, so a step into the room can switch on lights, appliances or a whole scene. A built-in light sensor lets automations react to daylight — turn lights on only after dusk. Because it speaks Matter over Thread, it works across Apple Home, Google Home, Amazon Alexa and Samsung SmartThings with no Eve account, no subscription and no Eve cloud. IPX3 splash resistance means it is at home indoors or in sheltered outdoor spots, and the wireless design lets you place it anywhere. Field of View 120° Range Up to 9 m Light Sensor Built-in Power 2× AAA Wireless Thread Works With Matter Motion-triggered automations Walk into a room and let Eve Motion switch on lights, appliances or a full home-cinema scene. Refine rules to trigger groups of devices, or only after sunset, for effortless comfort and security. One sensor, every platform Matter over Thread means Eve Motion works with Apple Home, Google Home, Amazon Alexa and Samsung SmartThings. Pick the app you already use — no lock-in, no separate bridge. Smarter with light sensing A built-in light sensor reads brightness from 0 to 15,000 lux, so automations can fire only when it is dark enough. Save power and avoid switching lights on in broad daylight. Private by design No subscription, no registration and no Eve cloud. Eve Motion is wireless on 2× AAA batteries and IPX3 splash-resistant, so you can place it indoors or in sheltered outdoor spots. Specifications — Eve Motion 10EBY9951 Model Eve Motion (Matter) · 10EBY9951 Sensor Type Passive infrared (PIR) motion + ambient light sensor Field of View 120° Detection Range Up to 9 m (30 ft) at 2 m mounting height Light Sensor Twilight setting 0 – 15,000 lux Connectivity Matter over Thread Works With Apple Home · Google Home · Amazon Alexa · Samsung SmartThings · Home Assistant Hub Required Matter controller + Thread Border Router (e.g. HomePod, Apple TV 4K, Echo, Nest Hub, SmartThings hub) Power 2 × AAA replaceable batteries (included) Installation Freestanding or wall mounting Water Resistance IPX3 — indoor & sheltered outdoor use Operating Temperature -18°C to +55°C Dimensions 65 × 65 × 34 mm In the Box Eve Motion · 2× AAA batteries · Quick Start Guide Requires iPhone/iPad (latest iOS/iPadOS) or Android 8.1+, plus a compatible Matter/Thread hub Privacy No subscription · no registration · no Eve cloud Warranty 2 years · CCTV Guru Australia Downloads Eve Motion Quick Start GuideEve Important Safety Guide Which smart home platforms does Eve Motion work with?As a Matter-over-Thread device, Eve Motion works across Apple Home, Google Home, Amazon Alexa, Samsung SmartThings and Home Assistant. You control it from whichever platform you prefer — no lock-in to a single ecosystem. Do I need a hub?Yes. Eve Motion is a Matter device that connects over Thread, so you need a compatible hub that provides both a Matter controller and a Thread Border Router — for example a HomePod, Apple TV 4K, Echo, Nest Hub or SmartThings hub. Can I use Eve Motion outdoors?Eve Motion is IPX3 splash-resistant, so it suits indoor rooms and sheltered outdoor spots like a covered porch or balcony. It is not fully weatherproof, so avoid direct rain or fully exposed locations. How is it powered and how long do batteries last?Eve Motion runs on 2× AAA replaceable batteries (included) with no wiring needed. Eve rates the batteries for around a year of typical use, so you can place the sensor anywhere. What is the detection range and field of view?Eve Motion has a 120° field of view and detects motion up to 9 m (30 ft) at a 2 m mounting height. A built-in light sensor also measures brightness so automations can react to daylight. Is there a subscription or Eve account required?No. Eve Motion needs no subscription, no registration and no Eve cloud. Your data stays private and is processed through your chosen smart home platform. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Energy · 10ECF6001 · Apple HomeKit Smart Plug & Power Meter · ThreadHomeKit Smart Plug & Meter Eve Energy 10ECF6001 — Smart Plug & Power Meter (Thread) · Australian Stock & 2-Year Warranty The Eve Energy is an Apple HomeKit smart plug and true power meter for Australian Type I sockets. Turn lights and appliances on or off with Siri, the Eve app or the built-in button, and see exactly how much power they draw — plus the projected running cost based on your electricity rate. Built-in schedules run on the plug itself, independently of your iPhone and network, while Thread connectivity makes your smart home more responsive and lets Eve Energy act as a router node to extend its reach. No bridge, no account, no subscription — just private, local Apple HomeKit control. Max Load 10 A / 2300 W Metering Real-Time Schedules On-Device Connectivity Thread + BLE Socket AU Type I Works With Apple Home Smart plug & power meter in one Switch a connected lamp or appliance on and off via app, Siri or the built-in button — and track exactly how much power it uses, with projected running cost based on your electricity rate. Schedules that run on their own Set up autonomous schedules that switch devices independently of your iPhone and home network, putting your appliances on autopilot day and night. Thread for a stronger smart home Eve Energy joins your Thread network automatically and works as a router node, enhancing the stability and reach of every Thread accessory in your home. Private by design No bridge, no gateway, no Eve account and no subscription. Setup is quick and TÜV-certified, and all automation runs locally through Apple HomeKit for the highest data privacy. Specifications — Eve Energy 10ECF6001 Model Eve Energy (Thread) · 10ECF6001 Type Smart plug & power meter Power Input / Output: AC 100–240 V, 50/60 Hz Rated Current Max. 10 A / 2300 W Socket Australian Type I (AS 3112) Connectivity Thread + Bluetooth Low Energy Platform Apple HomeKit only (not Matter) Home Hub HomePod mini, HomePod (2nd gen) or Apple TV 4K with Thread — for remote & presence control Energy Monitoring Real-time consumption + projected cost Schedules On-device, independent of iPhone/network Manual Control Built-in button Requires iPhone/iPad with latest iOS/iPadOS Dimensions 77 × 77 × 60 mm In the Box Eve Energy, Quick Start Guide SKU / EAN EV10ECF6001 · 4260195392243 Warranty 2 years · CCTV Guru Australia Downloads Eve Energy (AU) Quick Start GuideEve Important Safety Guide Does Eve Energy 10ECF6001 work with Android, Google Home or Alexa?No. This Thread generation is built exclusively for Apple HomeKit and is set up and controlled through the Apple Home or Eve app on an iPhone or iPad. It is not a Matter device and does not work with Android, Google Home, Alexa or SmartThings. Do I need a home hub?Local control over Bluetooth works without a hub. To control Eve Energy while away from home, run schedules based on presence, or use it as a Thread router node, you need an Apple home hub with Thread — a HomePod mini, HomePod (2nd gen) or Apple TV 4K with Thread. How much power can it switch?Eve Energy is rated for a maximum of 10 A / 2300 W at AC 100–240 V, 50/60 Hz. It fits Australian Type I (AS 3112) wall sockets. Does it really measure energy use?Yes. Eve Energy is a true power meter. It tracks real-time consumption and total usage, and shows projected running cost based on your electricity rate — all in the Eve app, with no subscription. Can I set schedules without my phone?Yes. Schedules are stored on the device, so it switches connected lamps or appliances on and off automatically — independently of your iPhone and home network. A built-in button also toggles it manually. Is my data private?Yes. Eve requires no account, no registration and no cloud. All automation runs locally through Apple HomeKit for the highest data privacy. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Aqua · 10ECC8101 · Apple HomeKit + Thread · Smart Irrigation ControllerHomeKit Water Controller Eve Aqua 10ECC8101 — Smart Water Controller (Thread) · Australian Stock & 2-Year Warranty Eve Aqua turns any outdoor tap into a smart irrigation controller for Apple Home. Screw it onto your garden faucet, connect your hose or a Gardena-style micro-drip system, and let autonomous schedules water the garden for you — up to seven watering periods a day, stored on the device so they run without Wi-Fi, a bridge or a gateway. Start and stop watering with your iPhone, Apple Watch, Siri or the onboard button, keep an eye on water usage in the Eve app, and add a HomePod mini or Apple TV to control it all from anywhere. Rated IPX4 with UV protection, it is built to live outdoors year round. Type Irrigation Valve Schedules 7 / Day Weatherproof IPX4 · UV Wireless Thread + BLE Power 2 × AA Works With Apple Home Autonomous schedules Set up to seven daily watering periods in the Eve app. Schedules are stored on Eve Aqua itself, so your garden is watered on time whether or not your iPhone or the internet is connected — no bridge or gateway required. Control it your way Water with a touch of the onboard button, or use your iPhone, iPad, Apple Watch and Siri. Add a HomePod mini or Apple TV as a home hub and you can start or pause watering from anywhere — perfect during a heatwave while you are away. Fits any tap, any hose The standard 26.5 mm / G¾" thread fits virtually any outdoor faucet, and the included hose connector works with all popular hose systems and multi-channel distributors such as Gardena or Kärcher. Installs in minutes. Auto shut-off & water insight Manual watering switches off automatically after a time you set once — no more waste or flooding thanks to the quiet magnetic valve. The Eve app continuously calculates how much water your garden consumes. Specifications — Eve Aqua 10ECC8101 Model Eve Aqua (3rd gen, Thread) · 10ECC8101 Type Smart water / irrigation controller for outdoor taps Thread Fitting 26.5 mm / G¾" — fits standard outdoor faucets Watering Periods Up to 7 autonomous schedules per day Operating Range 4 °C – 50 °C / 39 °F – 122 °F Water Pressure Min 1 bar / 14.5 psi — Max 5 bar / 72.5 psi Weather Rating IPX4 water resistant · UV protection Power 2 × AA replaceable batteries (included) Wireless Thread + Bluetooth Low Energy Platform Apple HomeKit (Apple Home / Eve app) Home Hub HomePod mini or Apple TV 4K (for remote access & automations) Hose Compatibility All popular hose systems + multi-channel distributors (Gardena, Kärcher) Dimensions 77 × 95 × 128 mm In the Box Eve Aqua · 2× AA batteries · Hose Connector · Quick Start Guide Requires iPhone/iPad with latest iOS/iPadOS Warranty 2 years · CCTV Guru Australia Downloads Eve Aqua Quick Start GuideEve Important Safety Guide Does Eve Aqua work with Android or Google Home?No. Eve Aqua (Thread generation) is built for Apple HomeKit and is controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Will Eve Aqua fit my outdoor tap?Its standard 26.5 mm / G¾" thread fits virtually any regular outdoor faucet, and the included hose connector works with all popular hose systems and multi-channel distributors such as Gardena or Kärcher. Screw it on hand-tight and check no water escapes when the valve is shut. Do I need Wi-Fi, a bridge or internet in the garden?No. Schedules are stored on the device, so Eve Aqua waters autonomously with no bridge, gateway or Wi-Fi. A home hub (HomePod mini or Apple TV 4K) is only needed for remote access and automations while you are away. Is it weatherproof for outdoor use?Yes. Eve Aqua is rated IPX4 water resistant with UV protection and operates from 4 to 50 °C, so it is designed to live outdoors on your garden tap or terrace year round. How is it powered?Two replaceable AA batteries (included). There is no mains cable, so you can mount it anywhere on your tap. Can I see how much water my garden uses?Yes. The Eve app continuously calculates watering amounts, and the built-in auto shut-off ends manual watering after a time you set once, preventing waste and flooding. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Outdoor Cam · 10ECA8101 · Apple HomeKit Secure Video · Floodlight CameraHomeKit Floodlight Camera Eve Outdoor Cam 10ECA8101 — Apple HomeKit Secure Video · Australian Stock & 2-Year Warranty The Eve Outdoor Cam is a weatherproof Full HD floodlight camera built exclusively for Apple HomeKit Secure Video. A wide 157° field of view, infrared night vision and a dedicated motion sensor keep watch over doorsteps, patios and backyards day and night, while a dimmable floodlight switches on the instant activity is detected. Your Apple TV or HomePod analyses the feed locally — people, pets, vehicles and packages are recognised at home and encrypted clips are stored only in your iCloud. No Eve account, no Eve subscription, no cloud middle-man. A sleek IP55 metal enclosure and three-axis angle adjustment make it easy to install and easy to live with. Video 1080p FHD Field of View 157° Floodlight Dimmable · Motion Night Vision Infrared Audio Two-Way Weatherproof IP55 Rated HomeKit Secure Video Built exclusively for Apple HomeKit Secure Video. Events are analysed on your Apple home hub and stored encrypted in your iCloud — never on Eve or third-party servers. Motion-activated floodlight A dedicated motion sensor triggers the dimmable floodlight the moment activity is detected. Set the schedule and duration in the Eve app, or tap light boost to shine extra-bright. Only the alerts that matter With an Apple TV or HomePod as your home hub, Eve Outdoor Cam distinguishes people, pets, vehicles and packages, so leaves in the wind won't trigger a notification. Weatherproof by design A sleek IP55-rated metal enclosure withstands the elements, while three-axis angle adjustment lets you aim it precisely. Best installed replacing an existing outdoor light. Specifications — Eve Outdoor Cam 10ECA8101 Model Eve Outdoor Cam · 10ECA8101 Camera Full HD 1080p / 24 fps, H.264 Field of View 157° Night Vision Infrared Floodlight Dimmable, motion-activated, with light boost Motion Detection Dedicated infrared sensor · 100°, up to 8 m (at 2.5 m mount height) Audio Two-way (built-in microphone + speaker) Smart Analysis People / pet / vehicle / package via Apple home hub Recording HomeKit Secure Video · 10-day iCloud history Platform Apple HomeKit only (exclusive) Home Hub HomePod or Apple TV (4th gen or later) required Weatherproofing IP55 certified metal enclosure Mounting Wall-mount · three-axis camera angle adjustment Wi-Fi 2.4 GHz, 802.11 b/g/n Power Hardwired AC 100–240 V, 50/60 Hz (neutral + ground required) Status LED Shows off / streaming / recording Dimensions 170 × 65 × 76 mm In the Box Camera, mounting kit & connection terminals, surveillance sticker set, manual Requires iPhone/iPad + iCloud+ 50 GB (not included) Warranty 2 years · CCTV Guru Australia Downloads Eve Outdoor Cam ManualEve Important Safety Guide Does Eve Outdoor Cam work with Android or Google Home?No. Eve Outdoor Cam is built exclusively for Apple HomeKit Secure Video and is controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Do I need an Apple TV or HomePod?Yes. To record footage, receive people/pet/vehicle/package notifications and view the camera while away, you need a home hub — a HomePod or Apple TV (4th generation or later). The hub analyses the video locally for privacy. Is there a subscription fee?There is no subscription to Eve. HomeKit Secure Video recordings are stored in iCloud, so an iCloud+ plan (50 GB or higher, not included) is required. Camera recordings do not count against your iCloud+ storage. Is it suitable for outdoors?Yes. Eve Outdoor Cam has an IP55-rated weatherproof metal enclosure designed for outdoor use at doorsteps, patios and backyards. For an indoor-only camera, see the Eve Cam. How does the floodlight work?The built-in dimmable floodlight turns on automatically the moment the dedicated motion sensor detects activity. Set if, when and for how long it illuminates in the Eve app, or tap light boost to make it shine extra-bright. How is it powered and installed?Eve Outdoor Cam is hardwired to mains AC power (100–240 V) and requires both a neutral wire and a connection to ground. It is best installed replacing an existing outdoor light and offers three-axis angle adjustment for easy aiming. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Room · 10EBX9901 · Indoor Air Quality (VOC), Temperature & Humidity · ThreadHomeKit Air Quality Monitor Eve Room 10EBX9901 — Indoor Air Quality Monitor · Australian Stock & 2-Year Warranty The Eve Room keeps watch over the air you breathe indoors, tracking air quality (VOC concentration), temperature and humidity so you can see how cooking, cleaning and everyday activities affect a room. A high-contrast e-ink display shows live readings at a glance in any light, while the Eve app plots detailed history and trends on your iPhone or iPad. HomeKit-enabled with Thread and Bluetooth, an integrated rechargeable battery lasts 6+ weeks per charge — and with no Eve cloud, no registration and no tracking, your data stays private. Air Quality VOC Sensor Temperature ± 0.3 °C Humidity ± 3% RH Display E-ink Battery 6+ Weeks Works With Apple Home See your indoor air quality Eve Room detects harmful VOCs released by furnishings, appliances and everyday activities, giving you a clear read on the air in any room and a nudge when it is time to ventilate. A glance is all it takes The high-contrast e-ink display (200 × 200 px) stays readable in any light, including direct sunlight, showing live VOC, temperature and humidity without reaching for your phone. History and trends in the Eve app Open the Eve app on your iPhone or iPad to review detailed graphs over time, spot patterns and understand exactly how your home responds to cooking, cleaning and ventilation. Thread, and private by design HomeKit-enabled and Thread-ready for a fast, robust smart-home connection. No Eve cloud, no registration, no tracking — your data stays with you and your Apple Home. Specifications — Eve Room 10EBX9901 Model Eve Room · 10EBX9901 Measures Air quality (VOC), temperature, humidity Display High-contrast e-ink, 200 × 200 px Temperature Range 0 °C — 50 °C (typical accuracy ± 0.3 °C) Humidity Range 5% — 95% RH (typical accuracy ± 3%) Connectivity Thread & Bluetooth Platform Apple HomeKit (Apple Home / Eve app) Home Hub HomePod mini or Apple TV 4K (Thread border router) for remote & automatic control Power Integrated rechargeable battery, 6+ weeks per charge Charging Port Micro USB (charging cable included) Dimensions 54 × 54 × 15 mm Privacy No Eve cloud · no registration · no tracking In the Box Eve Room, USB charging cable, quick start guide Requires iPhone/iPad with latest iOS/iPadOS Warranty 2 years · CCTV Guru Australia Downloads Eve Room Quick Start GuideEve Important Safety Guide What does the Eve Room measure?Eve Room tracks indoor air quality (VOC concentration in ppm), temperature and relative humidity, so you can see how cooking, cleaning, furnishings and daily activities affect the air in a room. Does it work with Android or Google Home?No. Eve Room is HomeKit-enabled and controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Do I need a hub for Thread?Thread connectivity needs a Thread border router such as a HomePod mini or Apple TV 4K. Eve Room also works over Bluetooth, and a home hub is required to view data automatically while you are away from home. How is it powered and charged?Eve Room has an integrated rechargeable battery that lasts 6+ weeks on a single charge and recharges via the included USB cable (Micro USB port). Can I see historical air quality data?Yes. The e-ink display shows live readings, and the Eve app plots detailed history and graphs for VOC, temperature and humidity over time so you can spot trends. Does Eve store my data in the cloud?No. Eve has no cloud, no registration and no tracking. Your data stays private on your device and within your Apple Home. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Flare · 10EBV8701 · Portable Smart LED Lamp · Apple HomeKit · IP65 WaterproofHomeKit Portable Lamp Eve Flare 10EBV8701 — Portable Smart LED Lamp · Australian Stock & 2-Year Warranty The Eve Flare is a cordless, rechargeable smart lamp you can carry anywhere. Its frosted sphere throws soft, even light across the full RGB colour spectrum plus warm-to-cool white, all set from the Eve or Apple Home app, by voice with Siri, or with a tap of the on-board button. An IP65-rated waterproof shell lets it move from the living room to the balcony, terrace or poolside, while the built-in battery delivers 6+ hours of light and tops up cable-free on the included wireless charging base. Built for Apple HomeKit — no Eve account, no cloud, no subscription. Brightness 90 lm Colour RGB + White Battery 6+ hours Charging Wireless base Rating IP65 Works With Apple Home Take the light anywhere Cordless and rechargeable, Eve Flare moves with you — table to terrace, bedside to poolside. A built-in carry-and-hang handle makes it easy to reposition or hang wherever you need a glow. Colour for every mood Dial in the full RGB spectrum or a clean adjustable white. Set a scene for dinner, a warm read at night or a splash of colour for a party, straight from the Eve or Apple Home app. Made for the outdoors An IP65-rated waterproof shell shrugs off dust and water jets, so a sudden shower on the balcony is no problem. Bring it back inside on its handle when the night winds down. Private by design Built for Apple HomeKit with no Eve account, registration or cloud. Control and automation happen locally on your Apple devices — with Bluetooth and Thread for a responsive, robust connection. Specifications — Eve Flare 10EBV8701 Model Eve Flare · 10EBV8701 Light Source LED, full RGB colour spectrum + adjustable white Brightness Up to 90 lumens Battery Life 6+ hours per charge (built-in rechargeable) Charging Wireless charging base (included) Power Supply AC 100–240 V, 50/60 Hz Water Resistance IP65 — indoor & outdoor use Connectivity Bluetooth Low Energy + Thread Platform Apple HomeKit only Control Eve app, Apple Home app, Siri, on-board button, scenes & timers Portability Carry-and-hang handle Operating Range 0–40 °C, 0–80% humidity Diameter Approx. 25 cm sphere In the Box Eve Flare, wireless charging base, power supply, Quick Start Guide Requires iPhone or iPad (not included) Warranty 2 years · CCTV Guru Australia Downloads Eve Flare Quick Start GuideEve Important Safety Guide Does the Eve Flare work with Android or Google Home?No. Eve Flare is built for Apple HomeKit and is controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Is the Eve Flare waterproof for outdoor use?Yes. It carries an IP65 rating, so it resists dust and water jets. Use it on the balcony, terrace or by the pool, then carry it back inside on its handle when you're done. How long does the battery last and how does it charge?The built-in rechargeable battery gives 6+ hours of light on a charge. It tops up cable-free by sitting on the included wireless charging base. Can it show colours or just white?Both. Eve Flare produces the full RGB colour spectrum plus adjustable white, all set from the Eve or Apple Home app, or automated with scenes and timers. Do I need a hub or bridge?No bridge is required for direct control over Bluetooth. Add an Apple home hub (HomePod or Apple TV) and Eve Flare joins your Thread network for remote access and automations. What comes in the box?One Eve Flare lamp, a wireless charging base, a power supply and a Quick Start Guide. An iPhone or iPad is required for setup (not included). 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Weather · 10EBS9901 · Apple HomeKit · Connected Weather StationHomeKit Weather Station Eve Weather 10EBS9901 — Temperature, Humidity & Barometric Pressure · Australian Stock & 2-Year Warranty Eve Weather is a connected outdoor weather station that puts your local conditions right on your doorstep. Precision sensors track temperature, humidity and barometric pressure, while the crisp built-in display shows a 12-hour weather trend at a glance — so you know whether to bundle up or dust off the deckchair. Built exclusively for Apple Home, it runs on Bluetooth and Thread with no Eve account, no subscription and no cloud middle-man. A single CR2450 battery keeps it running wire-free for about a year, and IPX3 water resistance suits sheltered patios, balconies and gazebos. Temperature ±0.3 °C Humidity ±3% RH Pressure Barometric Trend 12-Hour Power CR2450 Works With Apple Home Conditions on your doorstep Precision-engineered sensors measure temperature, humidity and barometric pressure with high accuracy, so you always know the current conditions right where you live — not a distant weather station. See the weather trend at a glance Eve Weather analyses local pressure changes and shows a 12-hour weather trend on its display. Clear skies or clouding over? You can tell instantly from the icons, without opening the app. Track your microclimate over time The Eve app for iPhone and iPad records and visualises temperature, humidity and pressure history — no Eve account, no subscription and no cloud. Your data stays private on your device. Wireless and beautifully built An anodized aluminium body and IPX3 water resistance suit sheltered outdoor spots. A single CR2450 battery lasts about a year, and Thread keeps it responsive across your Apple home. Specifications — Eve Weather 10EBS9901 Model Eve Weather · 10EBS9901 Measures Temperature, humidity, barometric pressure Display Built-in screen with 12-hour weather trend Temperature Accuracy ± 0.3 °C Humidity Accuracy ± 3% relative humidity Pressure Accuracy ± 1 mbar Operating Range -18 °C to 55 °C · 0–100% RH · 260–1260 mbar Platform Apple HomeKit (exclusive) Connectivity Bluetooth Low Energy + Thread Home Hub HomePod or Apple TV for remote access & automations Power 1 × CR2450 replaceable battery (included), ~1 year Water Resistance IPX3 (sheltered outdoor use) Body Anodized aluminium Dimensions 54 × 54 × 16 mm Requires iPhone/iPad with latest iOS/iPadOS (not included) In the Box Eve Weather, 1 × CR2450 battery, quick start guide Warranty 2 years · CCTV Guru Australia Downloads Eve Weather Quick Start GuideEve Important Safety Guide Does Eve Weather work with Android or Google Home?No. This model (10EBS9901) is built for Apple HomeKit and is set up and controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. What does Eve Weather measure?Temperature, relative humidity and barometric pressure. Precision sensors are accurate to ±0.3 °C, ±3% humidity and ±1 mbar, and the built-in display shows a 12-hour weather trend at a glance. Can I use it outdoors?Yes, for sheltered outdoor spots. Eve Weather is rated IPX3, so it withstands spraying water and suits a covered patio, balcony or gazebo. It is not fully weatherproof, so avoid direct heavy rain or submersion. How is it powered and how long does the battery last?It runs on a single replaceable CR2450 coin cell (included) and is completely wireless. Typical battery life is around a year depending on use. Do I need an Apple TV or HomePod?Not to read conditions nearby, but a home hub (HomePod or Apple TV) is required for remote access when you are away and for HomeKit automations that respond to temperature or humidity. Can I see historical weather data?Yes. The Eve app for iPhone and iPad records and visualises temperature, humidity and pressure over time, so you can review your home's microclimate. There is no Eve cloud and no account required. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Door & Window · 10EBN9901 · Apple HomeKit · Wireless Contact SensorHomeKit Contact Sensor Eve Door & Window 10EBN9901 — Apple HomeKit Contact Sensor · Australian Stock & 2-Year Warranty The Eve Door & Window is a privacy-first wireless contact sensor that tells you at a glance whether a door, window, cabinet or safety gate is open or closed. This is the original 10EBN9901 generation — Bluetooth and Apple HomeKit only — so it pairs straight to your iPhone or iPad with no bridge, no Eve account and no subscription. See live open/closed status in Apple Home, get instant notifications, trigger scenes and automations, and dive into detailed open/close history and duration statistics in the Eve app. It fits almost anywhere and installs in about a minute with the included adhesive — no tools required. Detects Open / Closed Connectivity Bluetooth Works With Apple Home Power ½ AA ER14250 Alerts Instant Privacy No Cloud Know the status at a glance Instantly see whether a door, window, cabinet or safety gate is open or closed in Apple Home — or just ask Siri. No more wandering the house to double-check before you leave or turn in for the night. Notifications & automations Get an instant alert the moment something opens, and trigger scenes automatically — switch on hallway lights on entry, or pause the heating when a window opens. You choose when notifications fire. History & statistics The free Eve app for iPhone and iPad records when and how often each door or window was opened and for how long, so you can spot patterns and make smarter choices about your home. Privacy by design No Eve account, no registration and no subscription. Your data stays in Apple Home and on your device — never on an Eve or third-party cloud. Tool-free adhesive install takes about a minute. Specifications — Eve Door & Window 10EBN9901 Model Eve Door & Window (original) · 10EBN9901 Function Wireless contact sensor — open / closed detection Connectivity Bluetooth (BLE) Platform Apple HomeKit only Matter / Thread Not supported (original generation) Notifications Instant open / closed alerts App Insights Open/close history & duration statistics (Eve app) Power 1 × ½ AA (ER14250 3.6 V) replaceable lithium battery Reader Dimensions 52 × 24 × 23 mm Magnet Tag Dimensions 18 × 18 × 8 mm Mounting Adhesive, tool-free (indoor) Home Hub HomePod or Apple TV (4th gen or later) for remote / automations Requires iPhone or iPad with latest iOS / iPadOS In the Box Sensor (reader & magnet tag), ½ AA battery, Quick Start Guide Warranty 2 years · CCTV Guru Australia Downloads Eve Important Safety GuideEve Door & Window Support & FAQs Does it work with Android or Google Home?No. This original 10EBN9901 generation is built exclusively for Apple HomeKit over Bluetooth and is controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Do I need an Apple TV or HomePod?For local control the sensor pairs directly to your iPhone or iPad over Bluetooth. To receive notifications and check status while away from home, you need an Apple home hub — a HomePod or Apple TV (4th generation or later). Does it support Matter or Thread?No. The 10EBN9901 is the original Bluetooth, HomeKit-only generation. If you need Matter over Thread for multi-platform use, choose the newer Matter version of Eve Door & Window instead. How is it powered and how long does the battery last?It runs on a single replaceable ½ AA (ER14250 3.6 V) lithium battery, included in the box. Battery status is shown in the Eve app, and the cell swaps out without removing the adhesive mount. Is there a subscription or Eve account?No. There is no Eve account, no registration and no subscription. Status and history stay in Apple Home and the Eve app — never on an Eve cloud. Indoor or outdoor, and how does it mount?Indoor use on doors, windows, cabinets and safety gates. It installs in about a minute with the included adhesive — no tools required. The reader is 52 × 24 × 23 mm and the magnet tag is 18 × 18 × 8 mm. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Water Guard · 10EBL8701 · 2 m Sensing Cable Extension · For Apple HomeKitWater Guard Cable Extension Eve Water Guard Cable Extension 10EBL8701 — 2 m Sensing Cable · Australian Stock & 2-Year Warranty The Eve Water Guard Cable Extension adds another 2 m of water-sensing cable to your existing Eve Water Guard leak detector. Every centimetre of the cable acts as a sensor, so extending it lets you protect more of the room — along walls, under sinks, behind the washing machine or across the basement floor. It plugs straight into the 3.5 mm socket via a simple quick-connect, needs no batteries and has no electronics of its own: the mains-powered Eve Water Guard base unit does all the sensing, alerting and Apple HomeKit work. Chain several extensions together to reach a total sensing length of up to 150 m. Added Length 2 m Extends To Up to 150 m For Eve Water Guard Connection 3.5 mm Quick-Connect Daisy-Chain Multiple Batteries None Needed Protect more floor Every centimetre of the cable is a sensor. Add 2 m at a time to run detection along walls, under cabinets and behind appliances, so no nook is left unwatched. Plug-and-go install Connect to the 3.5 mm socket on the Eve Water Guard or onto the end of an existing cable. No tools, no pairing, no app setup — the extra length is monitored automatically. Daisy-chain up to 150 m Join several extensions end to end to reach a total sensing length of up to 150 m — enough to blanket an entire basement, laundry or plant room. Passive and maintenance-free No batteries, no electronics and nothing to charge. The mains-powered Eve Water Guard base unit handles all sensing, the 100 dB siren and HomeKit alerts. Specifications — Eve Water Guard Cable Extension 10EBL8701 Model Eve Water Guard Sensing Cable Extension · 10EBL8701 Type Passive water-sensing cable extension (accessory) Added Length 2 m (6.5 ft) per extension Maximum Total Length Up to 150 m (490 ft) when daisy-chained Sensing Full-length — entire cable detects water contact Connection 3.5 mm (1/8") jack, quick-connect Compatible With Eve Water Guard leak detector (sold separately) Power None — passive, no batteries or electronics Platform Apple HomeKit (via the Eve Water Guard base unit) Placement Indoor use Warranty 2 years · CCTV Guru Australia Downloads Eve Water Guard Quick Start GuideEve Important Safety Guide Does the cable extension work on its own?No. It has no electronics, radio or siren of its own. It plugs into an Eve Water Guard leak detector (sold separately) and simply lengthens the water-sensing cable. How far can I extend the sensing cable?The Eve Water Guard ships with a 2 m sensing cable and can be extended with these 2 m extensions up to a total of 150 m (490 ft). Every centimetre of cable acts as a sensor. Do I need batteries?No. The extension is a passive sensing cable with no batteries or electronics. The mains-powered Eve Water Guard base unit drives everything. Can I daisy-chain several extensions together?Yes. Extensions connect end to end via the 3.5 mm jack, so you can run the cable along walls, under sinks and around the whole room up to the 150 m maximum. Which ecosystem does it work with?It inherits the Eve Water Guard's platform — Apple HomeKit. There is no separate app or setup for the extension; once plugged in, the extra length is monitored automatically. Indoor or outdoor?Indoor only — designed for laundries, bathrooms, kitchens, basements and plant rooms where the Eve Water Guard is installed. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Eve Cam · 10EBK8701 · Apple HomeKit Secure Video · 1080p Indoor CameraHomeKit Indoor Camera Eve Cam 10EBK8701 — Apple HomeKit Secure Video · Australian Stock & 2-Year Warranty The Eve Cam is a privacy-first Full HD indoor camera built exclusively for Apple HomeKit Secure Video. A 150° field of view, night vision to 5 m and two-way audio keep watch over rooms, hallways and nurseries, while your Apple TV or HomePod analyses the feed locally — people, pets and vehicles are recognised at home and encrypted clips are stored only in your iCloud. No Eve account, no Eve subscription, no cloud middle-man. A 360° × 180° magnetic base and interchangeable Australian plug make setup effortless. Video 1080p FHD Field of View 150° Night Vision Up to 5 m Audio Two-Way Power USB 5 V Works With Apple Home HomeKit Secure Video Built exclusively for Apple HomeKit Secure Video. Events are analysed on your Apple home hub and stored encrypted in your iCloud — never on Eve or third-party servers. Only the alerts that matter With an Apple TV or HomePod as your home hub, Eve Cam distinguishes people, pets and vehicles, so a passing shadow won't trigger a notification. Flexible, tool-light install The 360° × 180° magnetic base sits on any shelf or clicks onto the included wall plate. A 220 cm USB cable and Australian plug are in the box. Privacy by design No account. No registration. No subscription to Eve. A visible status LED always shows whether the camera is off, streaming or recording. Specifications — Eve Cam 10EBK8701 Model Eve Cam (2nd gen) · 10EBK8701 Camera Full HD 1080p / 24 fps, H.264 Field of View 150° Night Vision Infrared, up to 5 m Audio Two-way (built-in microphone + speaker) Motion Detection On-device, image-based (local) Smart Analysis People / pet / vehicle via Apple home hub Recording HomeKit Secure Video · 10-day iCloud history Platform Apple HomeKit only (exclusive) Home Hub HomePod or Apple TV (4th gen or later) required Wi-Fi 2.4 / 5 GHz, 802.11 a/b/g/n Power 5 V / 1 A max (USB), 220 cm cable Mounting 360° × 180° magnetic base + wall plate Plug Australian Type I (AS 3112) included Status LED Off / Blue (streaming) / Red (recording) Dimensions 122 × 65 × 60 mm Requires iPhone/iPad + iCloud+ 50 GB (not included) Warranty 2 years · CCTV Guru Australia Downloads Eve Cam Quick Start GuideEve Important Safety Guide Does Eve Cam work with Android or Google Home?No. Eve Cam is built exclusively for Apple HomeKit Secure Video and is controlled through the Apple Home or Eve app on an iPhone or iPad. It is not compatible with Android, Google Home or Amazon Alexa. Do I need an Apple TV or HomePod?Yes. To record footage, receive people/pet/vehicle notifications and view the camera while away, you need a home hub — a HomePod or Apple TV (4th generation or later). The hub analyses the video locally for privacy. Is there a subscription fee?There is no subscription to Eve. HomeKit Secure Video recordings are stored in iCloud, so an iCloud+ plan (50 GB or higher, not included) is required. Camera recordings do not count against your iCloud+ storage. Indoor or outdoor?Indoor only — ideal for rooms, hallways and nurseries. For a weatherproof outdoor camera with a floodlight, see the Eve Outdoor Cam. Does my footage go to the cloud or to Eve?No. The live stream is end-to-end encrypted and never reaches any cloud — not even iCloud. Recordings are analysed locally on your Apple hub and stored, encrypted, only in your own iCloud. Eve requires no account or registration. How is it powered and mounted?USB powered (5 V / 1 A) with a 220 cm cable and Australian Type I plug in the box. The 360° × 180° magnetic base stands on a surface or attaches to the included wall-mount plate. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

TP-Link Tapo C320WS 4MP Outdoor Wi-Fi Security Camera with Colour Night Vision The TP-Link Tapo C320WS is a versatile 4MP outdoor security camera that connects via Wi-Fi or Ethernet, making it an ideal choice for homeowners and small businesses across Australia looking for flexible, high-definition surveillance without complex cabling. With starlight colour night vision reaching up to 30 metres and built-in two-way audio, it delivers reliable around-the-clock monitoring. Key Features 4MP Ultra-HD Resolution — Records crisp 2560×1440 footage, capturing fine detail for confident identification. Starlight Colour Night Vision — Delivers full-colour footage up to 30 metres in low-light or complete darkness using a high-sensitivity sensor and white light LEDs. Wired or Wireless Connectivity — Connect via 2.4GHz Wi-Fi or Ethernet for flexible placement and installation options. Two-Way Audio — Built-in microphone and speaker allow real-time communication with visitors or as a deterrent. Motion Detection & Push Alerts — Receive instant notifications on your phone when movement is detected. Sound & Light Alarm — Activates a siren and strobe light to deter intruders when triggered. Local MicroSD Storage — Stores up to 256GB of footage on a microSD card (not included) for on-device recording without a subscription. Voice Control — Compatible with Google Assistant and Amazon Alexa for hands-free control. IP66 Weatherproof — Rated for dust and heavy rain, suitable for Australian outdoor conditions year-round. Tapo App — Manage live view, playback, and settings from anywhere via the free Tapo mobile app (iOS & Android). Use Cases Residential driveways, front doors, and backyards requiring wireless installation Rental properties where running cable is not practical Small retail shopfronts and cafés needing a simple plug-and-play camera Garages, sheds, and side gates with existing power but no data cabling Supplementing an existing wired CCTV system with additional wireless coverage Technical Specifications Specification Detail Model Tapo C320WS Image Sensor 1/3" CMOS Resolution 4MP (2560 × 1440) Lens 3.18mm, F/1.61 Night Vision Starlight Colour, up to 30m (White Light LEDs + 850nm IR) Video Compression H.264 Frame Rate 15fps Wi-Fi 2.4GHz (802.11b/g/n), up to 150Mbps Wired Network RJ45 Ethernet Wireless Security WPA/WPA2-PSK, 128-bit AES with SSL/TLS Motion Detection Yes — push notification alerts Audio Two-way (built-in mic & speaker) Alarm Sound & light (siren + strobe) Local Storage MicroSD up to 256GB (not included) Power Supply 100–240V AC adapter (9V/0.6A DC output, included) Weather Rating IP66 Operating Temperature -20°C to 45°C Voice Control Google Assistant, Amazon Alexa App Tapo (iOS 9+, Android 4.4+) Dimensions 142.3 × 103.4 × 64.3 mm Weight Approx. 0.5 kg Warranty 2 Years Recommended Accessories MicroSD Card (Class 10 / U3, up to 256GB) — Required for local on-camera recording without a hub or subscription. Tapo H200 Smart Hub — Expands your Tapo ecosystem with local storage and smart home integration. Outdoor Weatherproof Extension Cable — Extends the power cable run for installations away from existing power points. Junction Box / Surface Mount Adapter — Provides a clean cable entry point and additional mounting flexibility. Frequently Asked Questions Does the Tapo C320WS need a subscription to record footage? No. The C320WS records locally to a microSD card (up to 256GB, sold separately) with no ongoing subscription required. Optional cloud storage is available through the Tapo Care plan. Can I connect this camera via Ethernet instead of Wi-Fi? Yes. The C320WS includes an RJ45 Ethernet port, so you can connect it via a wired network for a more stable connection — particularly useful in areas with weak Wi-Fi signal. Does it work with 5GHz Wi-Fi? No. The C320WS operates on the 2.4GHz band only. Ensure your router broadcasts a 2.4GHz network during setup. How far does the colour night vision reach? The starlight sensor and white light LEDs provide colour night vision up to approximately 30 metres. In complete darkness, the 850nm IR LEDs extend visibility further in black-and-white mode. Is this camera compatible with other Tapo or Kasa devices? Yes. The C320WS integrates with the Tapo app ecosystem and is compatible with other Tapo cameras, hubs, and smart home devices. It also works with Google Assistant and Amazon Alexa. Is the C320WS suitable for Australian outdoor conditions? Yes. The IP66 rating protects against dust and heavy rain, and the operating temperature range of -20°C to 45°C covers all Australian climates including tropical and alpine regions.

Read more less

Turn Any Socket Smart — No Hub Required The TP-Link Tapo P100 is a compact mini smart Wi-Fi socket that lets you control any plugged-in device remotely from your smartphone. Whether you're automating lamps, fans, heaters, or appliances, the Tapo P100 makes it simple — just plug it in, connect to the free Tapo app, and you're in control from anywhere in Australia or overseas. Compatible with Amazon Alexa and Google Assistant for hands-free voice control. Key Features Remote Control: Turn connected devices on or off from anywhere using the free Tapo app on iOS or Android. Scheduling: Set daily or weekly schedules to automate devices — ideal for lights, fans, and appliances. Countdown Timer: Create countdown timers to automatically switch devices off after a set period. Away Mode: Randomly turns devices on and off to simulate occupancy while you're away from home. Voice Control: Works with Amazon Alexa and Google Assistant for hands-free operation. No Hub Required: Connects directly to your 2.4GHz Wi-Fi network — no additional smart home hub or bridge needed. Mini Compact Design: Small form factor avoids blocking the adjacent socket on a double outlet. High Load Capacity: Supports up to 2300W / 10A — suitable for most household appliances. Easy Setup: Bluetooth-assisted onboarding via the Tapo app gets you set up in minutes. Common Use Cases Automating lamps, floor lights, and bedside lighting Scheduling fans, heaters, and air purifiers Remotely controlling appliances while travelling Away Mode for home security simulation when on holiday Countdown timers for phone chargers, kettles, and coffee machines Adding smart control to non-smart appliances without replacing them Technical Specifications Model Tapo P100 Wi-Fi Standard IEEE 802.11b/g/n (2.4GHz) Bluetooth 4.2 (onboarding only) Power Requirements AC 220–240V ~ 50/60Hz, 10A Maximum Load 2300W / 10A Dimensions (H × W × D) 51 × 72 × 40mm Material PC (Polycarbonate) Buttons Power button Status Indicator LED App Compatibility Tapo (Android 4.4+, iOS 9.0+) Voice Assistant Amazon Alexa, Google Assistant Hub Required No Operating Temperature 0°C to 35°C Operating Humidity 10–90% RH (non-condensing) Certifications CE, RoHS In the Box Tapo P100 Smart Socket, Quick Start Guide Frequently Asked Questions Does the Tapo P100 work with 5GHz Wi-Fi? No. The Tapo P100 connects to 2.4GHz Wi-Fi networks only. If your router broadcasts both 2.4GHz and 5GHz on the same SSID, you may need to separate them or temporarily connect your phone to the 2.4GHz band during setup. Do I need a smart home hub? No hub is required. The Tapo P100 connects directly to your home Wi-Fi router and is managed entirely through the free Tapo app. Is it compatible with Apple HomeKit? The Tapo P100 is not natively compatible with Apple HomeKit. It works with Amazon Alexa and Google Assistant. For HomeKit compatibility, consider the Tapo P125M or other Matter-enabled Tapo smart plugs. Can I use it with high-power appliances like a heater or air conditioner? The Tapo P100 supports up to 2300W / 10A, which covers most portable heaters and fans. However, reverse-cycle air conditioners and other high-draw appliances may exceed this rating — always check your appliance's power consumption before use. Can I control it when I'm not at home? Yes. As long as the Tapo P100 is connected to your Wi-Fi and you have internet access on your phone, you can control it from anywhere in the world via the Tapo app. How many Tapo P100 sockets can I manage in the app? There is no fixed limit — you can add multiple Tapo P100 sockets (and other Tapo devices) to a single Tapo account and manage them all from one app.

Read more less

TP-Link Tapo L510E Dimmable Smart Wi-Fi Light Bulb (E27, 2700K Warm White) The TP-Link Tapo L510E is a dimmable smart Wi-Fi light bulb with an E27 Edison screw fitting that connects directly to your 2.4GHz Wi-Fi network — no hub or bridge required. Control brightness, set schedules, activate Away Mode, and manage your lighting from anywhere via the free Tapo app, Google Assistant, or Amazon Alexa. With a warm 2700K colour temperature and 806 lumens output, it’s a simple, affordable upgrade for any standard E27 light fitting across Australia. Key Features Dimmable Brightness — Adjust brightness from 1% to 100% to create the perfect atmosphere for any occasion — from bright task lighting to a soft evening glow. No Hub Required — Connects directly to your 2.4GHz Wi-Fi network via the Tapo app — no additional bridge, hub, or smart home controller needed. Voice Control — Compatible with Amazon Alexa and Google Assistant for hands-free on/off and dimming control. Schedules & Timers — Set daily on/off schedules and brightness levels so your lighting adjusts automatically to your routine. Sunrise & Sunset Modes — Automatically activates and deactivates based on your local sunrise and sunset times for effortless ambient lighting. Away Mode — Simulates occupancy by turning the light on and off at random intervals while you’re away, deterring potential intruders. Preset Scenes — Save your favourite brightness settings as presets for quick one-tap activation — ideal for movie nights, reading, or relaxing. Remote Control — Control your light from anywhere in the world via the Tapo app (iOS & Android). Energy Efficient — 8.7W power draw delivers 806 lumens — equivalent to a traditional 60W incandescent bulb at a fraction of the running cost. Tapo Ecosystem — Integrates with other Tapo smart devices for multi-device automations and scenes. Use Cases Living rooms and bedrooms — dim to the perfect level for movies, reading, or winding down at night Home offices — schedule bright lighting during work hours and automatically dim in the evening Hallways and entryways — set sunrise/sunset automation so lights are always on when needed Holiday homes and rental properties — Away Mode deters intruders while you’re not there Replacing standard E27 bulbs with smart lighting without rewiring or installing a hub Technical Specifications Specification Detail Model Tapo L510E Lamp Base E27 (Edison Screw) Colour Temperature 2700K (Warm White) Lumen Output 806 lumens Input Power 8.7W Input Voltage 220–240V AC, 50/60Hz Beam Angle 220° Dimmable Yes (via app) Wi-Fi 2.4GHz (IEEE 802.11b/g/n) Hub Required No Voice Control Amazon Alexa, Google Assistant App Tapo (iOS & Android) Certifications CE, RCM, RoHS Weight Approx. 80g Warranty 2 Years Recommended Accessories Tapo L510B (B22 Bayonet Version) — The same dimmable warm white smart bulb in a B22 bayonet fitting for Australian light fittings that use the bayonet cap standard. Tapo S200B Smart Button — Add a physical wireless button to control the L510E without reaching for your phone — ideal for bedside or entryway control. Tapo H200 Smart Hub — Optional hub that expands your Tapo ecosystem with sensors, buttons, and local automation without relying solely on Wi-Fi. Tapo L530E Multicolour Smart Bulb (E27) — Upgrade to full RGB colour control in the same E27 fitting if you want more than warm white dimming. Frequently Asked Questions Does the Tapo L510E require a hub or smart home controller? No. The L510E connects directly to your 2.4GHz Wi-Fi network and is managed entirely through the free Tapo app. No hub, bridge, or additional hardware is required. What is the difference between the L510E and L510B? The L510E has an E27 Edison screw fitting, which is the most common bulb fitting in Australia. The L510B has a B22 bayonet fitting. Both bulbs are otherwise identical in features, brightness, and colour temperature. Can I dim the bulb using a standard dimmer switch? No. The L510E is dimmed via the Tapo app or voice commands only — it is not compatible with traditional in-wall dimmer switches. It should be used with a standard (non-dimmer) light switch. Does it work with 5GHz Wi-Fi? No. The L510E operates on the 2.4GHz band only. Ensure your router broadcasts a 2.4GHz network during setup. Most dual-band routers support both 2.4GHz and 5GHz simultaneously. What does Away Mode do? Away Mode randomly turns the light on and off at varying intervals while you’re not home, simulating occupancy to deter potential intruders. It can be scheduled to activate automatically when you leave and deactivate when you return. Is the RCM certification relevant for Australia? Yes. RCM (Regulatory Compliance Mark) is the Australian and New Zealand mark indicating the product meets electrical safety and electromagnetic compatibility standards required for sale in Australia. The L510E is RCM certified and safe for use in Australian homes.

Read more less

TP-Link Tapo L530B Smart Wi-Fi Multicolour LED Bulb (B22 Bayonet) 16 Million Colours. No Hub. Total Control. The TP-Link Tapo L530B is a smart Wi-Fi LED bulb with a standard B22 bayonet fitting, designed to replace any ordinary bulb in your home with intelligent, app-controlled lighting. Choose from over 16 million colours, warm to cool white, and adjust brightness from 1% to 100% — all without a hub or bridge. Compatible with Amazon Alexa and Google Assistant for hands-free voice control. Key Features 16 million colours plus adjustable white (2,500 K–6,500 K) — warm to cool daylight 806 lumens output — equivalent to a 60 W incandescent bulb Fully dimmable from 1% to 100% No hub required — connects directly to 2.4 GHz Wi-Fi via the Tapo app Voice control via Amazon Alexa and Google Assistant Schedule & Timer — automate on/off times with custom brightness and colour Sunrise & Sunset modes — automatically adjusts to your local time zone Away Mode — simulates occupancy with randomised lighting to deter intruders Save presets for favourite scenes (e.g., movie night, reading, sleep) Restore Last State — returns to previous settings after a power interruption B22 bayonet fitting — suits standard Australian light sockets Rated for 15,000 hours of use Use Cases Living Rooms & Bedrooms: Set the perfect ambiance for movies, relaxation, or sleep with a single tap or voice command. Home Offices: Switch between warm and cool white to match your work schedule and reduce eye strain. Security & Away Mode: Simulate occupancy while you’re away to deter unwanted visitors. Smart Home Integration: Pair with other Tapo devices and control everything from the Tapo app or your preferred voice assistant. Rental Properties: Easy plug-and-play installation with no wiring changes — just screw in and connect. Specifications Specification Detail Model Tapo L530B Lamp Base B22 Bayonet Lumen Output 806 lumens (60 W equivalent) Input Power 8.7 W Input Voltage 220–240 V AC, 50/60 Hz Colour Range 16 million colours + white (2,500 K–6,500 K) Beam Angle 220° Dimmable Yes — 1% to 100% Colour Rendering Index ≥ 80 Rated Lifetime 15,000 hours Wi-Fi IEEE 802.11b/g/n — 2.4 GHz App Tapo App (iOS & Android) Voice Control Amazon Alexa, Google Assistant Hub Required No Dimensions (H × W) 115 × 60 mm Energy Consumption 8.7 kWh / 1,000 h Certifications CE, RoHS Frequently Asked Questions Does the Tapo L530B work with Australian B22 bayonet sockets? Yes. The L530B uses a standard B22 bayonet fitting, which is the most common light socket type in Australian homes. It fits directly into any standard B22 pendant, ceiling, or lamp fitting. Do I need a hub or smart home controller? No. The L530B connects directly to your 2.4 GHz home Wi-Fi network via the Tapo app — no hub, bridge, or additional hardware required. Can I control the bulb when I’m away from home? Yes. As long as the bulb is powered and connected to Wi-Fi, you can control it remotely from anywhere using the Tapo app on your smartphone. Does it work with Alexa and Google Assistant? Yes. The Tapo L530B is compatible with both Amazon Alexa and Google Assistant, allowing you to control on/off, brightness, and colour with simple voice commands. What happens if the power goes out? The Restore Last State feature ensures the bulb returns to its previous brightness and colour setting when power is restored — it won’t default to full white every time. Can I set the bulb to turn on and off automatically? Yes. The Tapo app supports scheduling, countdown timers, and Sunrise/Sunset modes that automatically adjust the bulb based on your local time zone and preferences.

Read more less