UniFi Switching — NDAA Compliant UniFi Pro 24 PoE — Managed 24-Port Gigabit Layer 3 PoE++ Switch (USW-Pro-24-POE) The Ubiquiti UniFi Pro 24 PoE (USW-Pro-24-POE) is an enterprise-grade managed switch with 24 Gigabit RJ45 ports — 16 delivering 802.3af/at PoE+ and 8 delivering high-power 802.3bt PoE++ up to 64 W per port — plus dual 10G SFP+ uplinks and full Layer 3 routing. With a 400 W total PoE budget, an 88 Gbps switching capacity, and a built-in 1.3″ touchscreen, it powers and manages cameras, access points, VoIP phones, and IoT devices from a single pane of glass in UniFi Network. Genuine Ubiquiti stock with fast shipping right across Australia. Ports 24 × Gigabit PoE PoE Budget 400 W Total Uplinks 2 × 10G SFP+ Routing Layer 3 Why Choose the UniFi Pro 24 PoE? 24 Gigabit PoE Ports Sixteen 802.3af/at PoE+ ports plus eight 802.3bt PoE++ ports (up to 64 W each) power cameras, access points, phones, and IoT devices directly — no separate injectors required. 400 W Total PoE Budget A 450 W internal AC/DC power supply delivers a 400 W total PoE budget, comfortably running a mixed fleet of legacy PoE and high-power PoE++ devices at once. Dual 10G SFP+ Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC aggregation to your core network or storage server, with plenty of headroom for surveillance and multi-AP sites. Full Layer 3 Routing Beyond Layer 2 switching, the Pro 24 PoE adds inter-VLAN routing, static routing, DHCP server and DHCP relay — keeping traffic local and fast without a separate router. High-Performance Hardware An 88 Gbps switching capacity, 44 Gbps non-blocking throughput, 65 Mpps forwarding rate, and support for 1,000 VLANs handle demanding enterprise and surveillance LANs with ease. 1.3″ Touchscreen Display A built-in 1.3″ LCM touchscreen shows live status and port information for quick monitoring and troubleshooting right at the rack. Managed by UniFi Network Provision, monitor and configure everything — VLANs, PoE scheduling, LACP, QoS, 802.1X, port mirroring — from the UniFi Network controller or mobile app, no licence fees. Power Redundancy + NDAA A USP-RPS DC backup input guards against PSU failure, while full NDAA Section 889 compliance suits government, defence, and security-sensitive sites. Technical Specifications Model USW-Pro-24-POE (UniFi Pro 24 PoE) RJ45 Ports 24 × Gigabit (10/100/1000) — 16 × 802.3af/at PoE+, 8 × 802.3bt PoE++ SFP+ Uplinks 2 × 1/10G SFP+ Max PoE per Port PoE+ 30 W • PoE++ 64 W Total PoE Budget 400 W Switching Capacity 88 Gbps Non-Blocking Throughput 44 Gbps Forwarding Rate 65 Mpps Layer Layer 3 (inter-VLAN routing, static routing, DHCP server/relay) Supported VLANs 1,000 MAC Address Table 16,000 L2 Features LACP, STP/RSTP, QoS (DSCP), IGMP snooping, 802.1X, port mirroring, jumbo frames, storm control Display 1.3″ LCM touchscreen Power Supply AC/DC internal, 450 W • 100–240 V AC, 50/60 Hz Redundancy USP-RPS DC backup input Max Power Consumption 50 W (excluding PoE output) Form Factor 1U rack mount (brackets included) Enclosure SGCC steel Dimensions / Weight 442 × 285 × 44 mm • 4.3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing Management UniFi Network (v5.10.5 and later) & mobile app Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Pro-24-POE Datasheet Ubiquiti Installation Guide What's in the Box UniFi Pro 24 PoE Switch The USW-Pro-24-POE managed Layer 3 PoE++ switch in its 1U steel chassis. Rackmount Kit Rack-mount brackets and screws for a clean 1U install in any standard rack. Power Cord Mains power cord for the internal 450 W AC/DC power supply. Not Included SFP+ modules/DAC cables and a USP-RPS for power redundancy are sold separately. Best For CCTV & Surveillance Power and manage UniFi Protect cameras over a single cable with plenty of PoE headroom and 10G uplinks to the NVR. Offices & Campuses Drive access points, VoIP phones, and IoT across VLANs with Layer 3 routing keeping traffic local and fast. Smart Buildings High-power 802.3bt PoE++ runs PTZ cameras, displays, and access control without separate power runs. Edge Aggregation Dual 10G SFP+ uplinks aggregate downstream switches into the core for multi-service edge LANs. Adopt and manage through a UniFi Network host — Cloud Gateway, Cloud Key, or UniFi Network self-hosted (v5.10.5+). Mounts in any standard 1U rack space with the included brackets; supports 400–1200 mm rack depth. Use SFP+ DAC or fibre transceivers for 10G uplinks to your core or NVR (sold separately). Add a USP-RPS to the DC backup input for automatic power-supply failover (sold separately). Frequently Asked Questions What PoE standards does the USW-Pro-24-POE support? 16 ports deliver 802.3af/at PoE+ (up to 30 W) and 8 ports deliver 802.3bt PoE++ (up to 64 W), with a 400 W total PoE budget across all ports. Is this a Layer 3 switch? Yes. The Pro 24 PoE supports Layer 3 features including inter-VLAN routing, static routing, and DHCP server/relay, alongside full Layer 2 switching. How do I manage it? It's managed through UniFi Network (version 5.10.5 or later) via the controller or mobile app — no subscription or licence fees. What are the uplink options? Two 1/10G SFP+ ports allow high-speed fibre or DAC aggregation to your core network, storage server, or NVR. Does it support power redundancy? Yes. A USP-RPS DC backup input provides automatic failover if the internal 450 W power supply fails (USP-RPS sold separately). Is the Pro 24 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less