Bosch Authorised Reseller in Australia

• Save -$37.01

  Bosch Bosch B426-M — IP Ethernet Communication Module (Solution 2000/3000/6000)

   

  Genuine Bosch · IP Ethernet Module · RSC+ App ControlBosch B426-MB426-M IP Ethernet Communication Module — Australian Stock & 3-Year Warranty The Bosch B426-M is an IP Ethernet communication module that connects your Bosch Solution 2000, Solution 3000 or Solution 6000 panel to the internet, enabling remote arm/disarm, live status and instant push alerts through the free Bosch RSC+ smartphone app. It replaces phased-out phone-line dialling with modern, always-on NBN monitoring over a standard RJ45 network cable, with AES encryption for secure alarm transmission. A plug-and-play upgrade that future-proofs any Solution system. Backed by our 3-year Australian warranty and local tech support. Connection 10/100 Ethernet Encryption AES up to 256-bit App Bosch RSC+ Power 12V DC from panel Remote App Control Arm, disarm and check status from anywhere via the free Bosch RSC+ app on iOS and Android. Instant Push Alerts Get real-time notifications the moment a zone triggers, for faster response than dialler-only systems. NBN Ready Replaces retired PSTN phone-line monitoring with reliable IP communication over your home network. Plug-and-Play Connects to the panel option bus and your router with a standard Ethernet cable — quick to commission. Technical Specifications Model / SKU Bosch B426-M Type IP Ethernet communication module Connection 10/100 Base-T Ethernet (RJ45) Protocols IPv4, IPv6, HTTP, HTTPS, TCP, UDP Encryption Up to AES 256-bit Operating Voltage 12V DC (powered by panel) Compatible Panels Solution 2000, Solution 3000, Solution 6000 (v2.26+) App Bosch RSC+ (free) Warranty 3 Years (Australia) Downloads B426-M DatasheetBosch IP Module Quick Start GuideBosch IP Module User Manual Frequently Asked Questions Which Bosch panels does the B426-M work with?It suits Bosch Solution 2000 and Solution 3000 kits, and Solution 6000 panels running firmware v2.26 or later. Is there a subscription fee for the RSC+ app?No. The Bosch RSC+ app is free to download and use with the B426-M for remote control and alerts. Can I connect over Wi-Fi instead of a cable?No, the B426-M requires a hardwired RJ45 Ethernet connection. If cabling is difficult, use a Powerline adaptor or a cellular module such as the B450-M. How is the module powered?It draws 12V DC directly from the panel option bus, so no separate power supply is needed. Does it need a static IP address?No. It supports DHCP for dynamic IP as well as static addressing, so it works on standard home NBN networks. What's in the box?The B426-M module PCB with mounting hardware. An Ethernet cable and enclosure are not included. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $219.00 $181.99

• Save -$91.00

  Bosch Bosch Solution 2000 Alarm Kit — 2 Blue Line Gen2 PIRs + Icon Keypad

  1 review

   

  Bosch Solution 2000 · Hardwired · 2 PIRs + Icon Keypad · Complete Kit Bosch Sol 2000 Kit Solution 2000 Alarm Kit (2 PIR) — Australian Stock & 3-Year Warranty Secure your home with the Bosch Solution 2000 hardwired alarm kit — Australia's trusted entry-level professional intrusion system. Unlike wireless DIY kits, this hardwired system delivers permanent, tamper-resistant protection with no sensor batteries to replace. The kit pairs the ICP-SOL2-P 8-zone control panel with an easy-to-use LCD Icon codepad, two Blue Line Gen2 (ISC-BPR2-W12) PIR motion detectors, and a full accessory pack (internal & external sirens, 7Ah backup battery and plug pack). Add a B426-M IP module for smartphone control via the Bosch RSC+ app. Backed by a 3-year Australian warranty. Zones 8 Hardwired Detectors 2x Blue Line Keypad LCD Icon App Ready Via B426-M Hardwired Reliability Wired sensors never need battery changes and won't drop off like wireless — set-and-forget protection. Simple Daily Use The LCD Icon codepad shows clear armed/disarmed status and is intuitive for the whole family. Complete & Ready Panel, keypad, two PIRs, internal & external sirens, backup battery and plug pack — everything to arm the install. Smartphone Optional Add the Bosch B426-M IP module for remote arm/disarm and push alerts through the Bosch RSC+ app. What's Included 1 x Control Panel (8-zone) Bosch Solution 2000 ICP-SOL2-P 1 x Keypad Bosch LCD Icon Codepad (IUI-SOL-ICON) 2 x PIR Motion Detectors Bosch Blue Line Gen2 (ISC-BPR2-W12) 1 x Accessory Kit Internal & external sirens, 12V 7Ah backup battery, 18VAC plug pack Technical Specifications Kit / SKU GC-BOS2000-KIT-2PIR Series Bosch Solution 2000 Zones 8 hardwired (single area) User Codes Up to 32 Detectors Supplied 2 x Blue Line Gen2 PIR (ISC-BPR2-W12) Keypad LCD Icon codepad (IUI-SOL-ICON) App Support Bosch RSC+ (requires optional B426-M IP module) Warranty 3 Years (Australia) Downloads Bosch Solution 2000 Datasheet Bosch Alarm Kit Quick Start Guide Bosch Alarm Kit User Manual Frequently Asked Questions Can I add more sensors later?Yes. The Solution 2000 supports up to 8 hardwired zones, so you can add up to 6 more motion detectors, reed switches or smoke detectors. Is this kit NBN ready?Yes, when you add the B426-M IP module it reports over your internet connection instead of a phone line. Does it work with pets?The supplied Blue Line Gen2 PIRs offer good false-alarm rejection; for pet homes we can supply the pet-friendly variant — just ask. Which keypad is included?The LCD Icon codepad (IUI-SOL-ICON). It can be upgraded to the alphanumeric text or touchscreen codepad if preferred. Does the kit include sirens and a battery?Yes — the accessory pack includes an internal siren, an external siren/strobe, a 12V 7Ah backup battery and the 18VAC plug pack. Can I install it myself?In Australia, alarm systems should be installed by a licensed security professional to meet insurance requirements and ensure correct programming. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $530.00 $439.00

• Save -$32.01

  Bosch Bosch IUI-SOL-ICON — Solution 2000/3000 LCD Icon Codepad (White)

   

  Icon LCD · Backlit Keys · Solution 2000/3000 · Made in GermanyIcon CodepadIUI-SOL-ICON LCD Icon Codepad — Australian Stock & 3-Year Warranty The Bosch IUI-SOL-ICON is the most popular user interface for the Bosch Solution 2000 and Solution 3000 hardwired alarm panels. Instead of scrolling text, it uses clear, easy-to-recognise symbols to show system status across up to 16 zones, so every member of the household can arm, disarm and check the alarm with confidence. Backlit keys make night-time operation effortless, while the flip-down protective door keeps the wall plate looking clean and tidy. Powered directly from the panel bus at 12 VDC and backed by a 3-year Australian warranty. Display LCD Icon Zones Up to 16 Power 12 VDC Bus Warranty 3 Years AU Simple Symbol Interface Intuitive icons replace confusing text menus, making the system easy for the whole family to operate. 16-Zone Status at a Glance Clear visual indication for up to 16 individual zones so you always know what is armed or open. Backlit for Night Use Illuminated keys ensure effortless arming and disarming in total darkness. Clean Wall Presence A flip-down protective door hides the keys for a tidy, minimalist look on any wall. Technical Specifications Model / SKU IUI-SOL-ICON Display Type LCD Icon (backlit) Zones Displayed Up to 16 Compatibility Bosch Solution 2000 & 3000 Colour White (plastic) Operating Voltage 12 VDC (powered via panel bus) Max Keypads per Panel Up to 4 Warranty 3 Years (Australia) Downloads IUI-SOL-ICON DatasheetBosch Codepad Quick Start GuideBosch Codepad User Manual Frequently Asked Questions Will this codepad work with a Bosch Solution 6000?No. The IUI-SOL-ICON is designed for the Solution 2000 and 3000 only. The Solution 6000 uses its own dedicated range of keypads such as the CP737B and CP155B. How many keypads can I add to my system?Both the Solution 2000 and 3000 support up to four keypads, so you can add a second codepad in a bedroom or garage. Can I mix an icon and a text keypad on the same panel?Yes. Many installs run an icon codepad in the bedroom and an IUI-SOL-TEXT alphanumeric codepad at the front door. How is the codepad wired and powered?It connects to the panel over the SDI2 data bus and draws 12 VDC directly from the panel — no separate power supply is required. Can I adjust the backlight and buzzer?Yes. The backlight level and buzzer volume can be adjusted directly through the keypad settings to suit your environment. What is in the box?The IUI-SOL-ICON codepad with its wall-mount base and flip-down cover, ready to wire to your Solution 2000 or 3000 panel. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $139.00 $106.99

• Save -$215.00

  Bosch Bosch Solution 3000 Alarm Kit — 3 Blue Line Gen2 PIRs + Keypad (Choice)

   

  Bosch Solution 3000 · Hybrid · 3 PIRs + Keypad Choice · Complete Kit Bosch Sol 3000 Kit Solution 3000 Alarm Kit (3 PIR) — Australian Stock & 3-Year Warranty The Bosch Solution 3000 is Australia's most popular hybrid alarm system, blending hardwired reliability with the option to expand into wireless sensors and remotes. This kit centres on the ICP-SOL3-P 16-zone (2-area) control panel, your choice of keypad (LCD Icon, alphanumeric Text or 5" Touchscreen), three Blue Line Gen2 (ISC-BPR2-W12) PIR motion detectors, a complete siren pack (internal & external siren/strobe), a 12V 7Ah backup battery and the TF008-B plug pack. Add a B426-M IP module for full Bosch RSC+ smartphone control. Backed by a 3-year Australian warranty. Zones 16 / 2 Areas Detectors 3x Blue Line Keypad Your Choice Expandable Wired + Wireless Hybrid Flexibility Run hardwired sensors now and add RADION wireless detectors, reeds and key fobs later — up to 16 zones. Two Areas Split the property into two independent partitions — arm the granny flat or garage while the house stays disarmed. Pick Your Keypad Choose the budget LCD Icon, plain-English Text codepad, or the modern 5" colour touchscreen. Smartphone Ready Add the B426-M IP module for remote arm/disarm and instant push notifications via Bosch RSC+. What's Included 1 x Control Panel (16-zone) Bosch Solution 3000 ICP-SOL3-P in metal enclosure (MW350) 1 x Keypad (choose one) Icon / Text / 5" Touchscreen 3 x PIR Motion Detectors Bosch Blue Line Gen2 (ISC-BPR2-W12) 1 x Siren Kit Internal siren + external siren/strobe 1 x Power & Backup TF008-B plug pack + 12V 7Ah battery Technical Specifications Kit / SKU GC-BOS3000-KIT-3PIR-Icon Series Bosch Solution 3000 Zones 16 (wired or wireless) Areas / Partitions 2 User Codes Up to 32 Detectors Supplied 3 x Blue Line Gen2 PIR (ISC-BPR2-W12) Keypad Choice: Icon / Text / 5" Touchscreen App Support Bosch RSC+ (requires optional B426-M IP module) Warranty 3 Years (Australia) Downloads Bosch Solution 3000 Datasheet Bosch Alarm Kit Quick Start Guide Bosch Alarm Kit User Manual Frequently Asked Questions Which keypad should I choose?The Icon codepad is simplest and most affordable; the Text codepad shows plain-English zone names; the 5" touchscreen offers a modern tablet-style interface. Can I add wireless sensors later?Yes. Add a B810 RADION receiver and you can mix hardwired and wireless devices up to 16 zones total. Does the kit include sirens?Yes — a high-output internal piezo plus an external siren with a blue strobe. How do I get the phone app?Add the B426-M IP module to enable the Bosch RSC+ app for remote control and alerts. What are areas (partitions) for?They let you arm one part of the property (e.g. garage or granny flat) while another part stays disarmed — ideal for dual-occupancy homes and small businesses. Is professional installation required?Yes. Australian alarm systems should be installed by a licensed security technician for correct programming and insurance compliance. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $475.00 - $695.00

• 

  Bosch Bosch ISC-BPR2-W12 — Blue Line Gen2 Hardwired PIR Motion Sensor (12m, PIR/Pet/TriTech Variants)

   

  Blue Line Gen2 · Hardwired PIR / TriTech · 12x12m · Pet-Friendly OptionsBlue Line Gen2 PIRISC-BPR2-W12 Hardwired PIR Motion Sensor — Australian Stock & 3-Year Warranty The Bosch ISC-BPR2-W12 is a professional Blue Line Gen2 hardwired PIR motion detector delivering reliable 12m x 12m indoor coverage with First Step Processing and Dynamic Temperature Compensation for strong catch performance and low false alarms. This page also lets you select pet-friendly PIR (ISC-BPR2-WP12), TriTech PIR + microwave (ISC-BDL2-W12G) and pet-friendly TriTech (ISC-BDL2-WP12G) variants, so you can match the exact detector to homes, offices, shops and complete Bosch alarm kits. Every unit ships from Australian stock and is backed by a 3-year Australian warranty. Coverage 12m x 12m Detection PIR / TriTech Output N/C Relay + Tamper Power 9-15 VDC Blue Line Gen2 Performance First Step Processing and Dynamic Temperature Compensation deliver dependable catch performance across changing indoor conditions. Choose PIR or TriTech Standard PIR for cost-effective indoor rooms, or TriTech (PIR + microwave Doppler radar) for tougher spaces needing extra false-alarm immunity. Pet-Friendly Options Select pet-immune PIR up to 20kg or pet-immune TriTech up to 45kg, keeping detection reliable in homes with pets. Fast, Flexible Install Flexible 2.2m to 2.75m mounting height needs no field adjustment, with wall, corner and optional ceiling mounting. Technical Specifications Model / SKU ISC-BPR2-W12 (Blue Line Gen2) Sensor Type PIR (TriTech PIR + microwave variants available) Coverage 12m x 12m Pet Immunity Up to 20kg (PIR) / up to 45kg (TriTech) on pet variants Alarm / Tamper Output Supervised N/C relay + N/C tamper Operating Voltage 9 - 15 VDC Mounting Height 2.2m - 2.75m (no adjustment required) Compatibility Bosch Solution 2000 / 3000 / 6000 & Vision panels Warranty 3 Years (Australia) Downloads ISC-BPR2-W12 DatasheetBosch PIR Motion Sensor Quick Start GuideBosch PIR Motion Sensor User Manual Frequently Asked Questions What mounting height suits the ISC-BPR2-W12?Mount between 2.2m and 2.75m. No field adjustment is required within this range, which simplifies installation and preserves the 12m x 12m coverage pattern. Which variant should I choose if I have pets?Choose ISC-BPR2-WP12 for pet-immune PIR up to 20kg, or ISC-BDL2-WP12G for pet-immune TriTech up to 45kg in premium residential or commercial installs. What voltage and wiring does it need?It operates on 9-15 VDC and connects via a supervised N/C relay output plus an N/C tamper, wiring straight into standard hardwired alarm zone inputs. Which Bosch panels is it compatible with?It suits Bosch Solution 2000, Solution 3000, Solution 6000 and Vision series panels using standard wired zones. What is the difference between PIR and TriTech?PIR uses passive infrared only, while TriTech (ISC-BDL2 variants) adds microwave Doppler radar for higher detection confidence and better false-alarm immunity in challenging spaces. What coverage area does it protect?All variants provide 12m x 12m detection, ideal for standard indoor rooms, offices, shops and warehouses. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $40.00 - $83.00

• 

  Bosch Bosch HCT-4UL — Universal 4-Button Wireless Remote (433MHz)

  1 review

   

  Universal · 4-Button · 433MHz · ProgrammableUniversal 4-Button FobHCT-4UL Universal 4-Button Remote — Australian Stock & 3-Year Warranty The Bosch HCT-4UL is a versatile universal 4-button 433MHz wireless transmitter for relay-based control across a wide range of systems. Its four programmable buttons drive relay outputs on a compatible receiver, making it ideal for garage doors, gate automation, output switching and simple alarm arm/disarm. As a universal remote it offers broader receiver compatibility than the standard HCT-4. Australian stock, backed by a 3-year warranty. Buttons 4 Programmable Frequency 433 MHz Compatibility Universal Output Relay Trigger Universal Compatibility Broad relay-based compatibility lets one remote drive many receiver setups — a flexible choice for mixed installs. 4 Programmable Buttons Assign each button to a different output for gates, garages, lights or arm/disarm across multiple devices. Reliable 433MHz Stable 433MHz transmission gives dependable everyday handheld operation. Simple Pairing Straightforward setup and compact, durable fob design for easy daily carry. Technical Specifications Model / SKU Bosch HCT-4UL Type Universal handheld wireless remote / key fob Buttons 4 programmable Frequency 433 MHz Output Relay trigger (via compatible receiver) Compatibility Universal relay-based Bosch receiver systems Typical Use Garage doors, gates, output switching, arm/disarm Power Battery powered Warranty 3 Years (Australia) Downloads HCT-4UL DatasheetBosch Remote Quick Start GuideBosch Remote User Manual Frequently Asked Questions What makes the HCT-4UL universal?It offers broader relay-based receiver compatibility than the standard HCT-4, suiting a wider range of Bosch-compatible setups. How many buttons does it have?Four programmable buttons, each able to control a separate relay output. What frequency does it use?433 MHz, the standard Bosch remote-control band in Australia. Can it arm and disarm an alarm?Yes, via a relay input on the panel. It triggers relay outputs rather than integrating natively like a RADION fob. Is it the same as the HCT-4?No — the HCT-4UL is the universal variant with wider compatibility. Match the remote to your receiver. Does it need a battery?Yes, it is battery powered for portable handheld use. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $59.00

• 

  Bosch Bosch CM910 — Solution 6000 Direct Link / Flash Programming Lead (USB)

   

  Solution 6000 · Direct Link + Flash · USB LeadUSB Program LeadCM910 Direct Link Lead — Australian Stock & 3-Year Warranty The Bosch CM910 is the direct link and flash programming USB lead that connects a PC to a Bosch Solution 6000, 144, 64, 16plus or 16i panel. Paired with Solution Link software it enables fast on-site programming, configuration changes and panel firmware flashing, ensuring reliable data transfer during setup and maintenance. A must-have installer lead for the Solution range, backed by a 3-year Australian warranty. Technical Specifications Model / SKU Bosch CM910 (BOSCM910 / F.01U.316.497) Type Direct link / flash programming lead Interface USB Compatible Panels Solution 6000, 144, 64, 16plus (16+), 16i Function PC-to-panel programming & firmware flashing Warranty 3 Years (Australia) Downloads CM910 DatasheetBosch Programming Lead Quick Start GuideBosch Programming Lead User Manual Frequently Asked Questions What is the CM910 used for?It is a USB lead that connects a PC to a Bosch Solution panel for direct link programming and firmware flashing. Which panels does it suit?Solution 6000, 144, 64, 16plus and 16i. Do I need software as well?Yes — use it with Bosch Solution Link (SW500B) programming software on your PC. What connection does it use?USB on the PC side to the panel's programming port. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $229.00

• 

  Bosch Bosch B338 — Universal Swivel Ceiling Mounting Bracket

   

  Genuine Bosch · Universal · Swivel · Ceiling Mount Bosch B338 Bracket B338 Universal Ceiling Bracket — Australian Stock & 3-Year Warranty The Bosch B338 (product no. 4.998.800.282) is a genuine swivelling universal bracket for ceiling-mounting Bosch detectors where a corner or wall position won't give the right coverage. It provides a vertical swivel range of +7° to -16° and horizontal swivel of ±45°, so a motion detector can be precisely aimed at the protected area. Rated for -25°C to 55°C and 0-95% humidity, it ships complete with a hardware pack and installation manual. Genuine Bosch hardware, backed by a 3-year Australian warranty. Vertical Swivel +7° to -16° Horizontal Swivel ±45° Mounting Ceiling Temp Range -25 to 55°C Precise Aiming Dual-axis swivel lets you tilt and pan the detector for accurate coverage of the protected zone. Universal Fit Suits a wide range of Bosch motion detectors where a ceiling mount is preferred over a wall or corner. Complete Kit Supplied with a mounting bracket, hardware pack and installation manual — ready to fit out of the box. Built to Last Rated -25°C to 55°C and 0-95% humidity for reliable service in Australian conditions. Technical Specifications Model / SKU B338 (BOSB338) Product No. 4.998.800.282 Mounting Type Ceiling-mounted Vertical Swivel +7° to -16° Horizontal Swivel ±45° Dimensions (H x W x D) 127 x 69 x 58 mm Operating Temperature -25°C to 55°C Operating Humidity 0-95% (non-condensing) In the Box Bracket, hardware pack, installation manual Warranty 3 Years (Australia) Downloads B338 Datasheet Bosch Bracket Quick Start Guide Bosch Bracket User Manual Frequently Asked Questions What is the B338 used for?It ceiling-mounts a Bosch motion detector and lets you swivel it to aim precisely at the protected area. How much movement does it allow?Vertical swivel of +7° to -16° and horizontal swivel of ±45°. Is mounting hardware included?Yes. The B338 ships with a hardware pack and installation manual. Which detectors does it suit?It is a universal bracket compatible with a wide range of Bosch detectors requiring a ceiling mount. Can it be used outdoors?It is rated -25°C to 55°C; use it with a detector suited to the environment and mount under cover for outdoor positions. What are its dimensions?127 x 69 x 58 mm. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $9.50

• 

  Bosch Bosch TF008-B — 18VAC 1.33A Plug Pack for Solution Alarm Panels

   

  Genuine Bosch · 18VAC 1.33A · 3-Wire Earthed · Solution Panels Bosch TF008-B Plug Pack TF008-B Plug Pack — Australian Stock & 3-Year Warranty The Bosch TF008-B is the genuine 18VAC 1.33A 3-wire compliant plug pack used to power Bosch Solution 2000, 3000, 4000 and 6000 alarm control panels. Its three-wire flying lead allows a mains earth connection between the plug pack and the panel or metal enclosure — useful for lightning protection and earthing — while built-in thermal fuses guard against overload and fault conditions. With a 24 W capacity and ESA-approved design, it is the correct replacement or new-install plug pack for most Bosch Solution systems. Genuine Bosch part, backed by a 3-year Australian warranty. Output 18VAC 1.33A Capacity 24 W Earth 3-Wire Input 240VAC 50Hz Genuine Bosch The factory plug pack specified for Solution 2000/3000/4000/6000 panels — correct voltage, current and connector. 3-Wire Earthed Flying earth lead lets you bond the metal enclosure for lightning protection and safe installation. Protected Design Built-in thermal fuses shut down under overload or fault, protecting the panel and wiring. ESA Approved Electrical Safety Authority approved with insulated active/neutral pins for compliant Australian installs. Technical Specifications Model / SKU TF008-B (BOSTF008-B) Input Voltage 240VAC 50Hz Output Voltage 18VAC Output Current 1.33A Maximum Capacity 24 W Earthing 3-wire, Class 1 earthed output Suits Panels Solution 2000 / 3000 / 4000 / 6000 Dimensions 78 x 59 x 77.9 mm Weight 620 g Operating Temperature -10°C to 40°C Warranty 3 Years (Australia) Downloads TF008-B Datasheet Bosch Plug Pack Quick Start Guide Bosch Plug Pack User Manual Frequently Asked Questions Which panels use the TF008-B?Bosch Solution 2000, 3000, 4000 and 6000 control panels. Why does it have three wires?The third wire is an earth flying lead so you can bond the metal enclosure for lightning protection and safe earthing. Is it AC or DC output?AC — 18VAC at 1.33A. The panel converts and regulates it internally to charge the battery and run the system. Does it charge the backup battery?Yes. The panel uses the TF008-B to run the system and keep the 12V SLA backup battery charged. Is it a genuine Bosch part?Yes — this is the genuine Bosch TF008-B, ESA approved for Australian installations. Can I use it as a replacement plug pack?Yes. It is the correct like-for-like replacement for a failed Solution-series plug pack. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $32.99

• 

  Bosch Bosch SW500B — Solution Link RAS Programming Software on USB (Solution 6000)

   

  Solution 6000 · Solution Link RAS · USB SoftwareRAS SoftwareSW500B Solution Link Software — Australian Stock & 3-Year Warranty The Bosch SW500B is the Solution Link RAS (Remote Alarm Software) programming package supplied on USB, the professional way to configure and manage Bosch Solution 6000, 144, 64, 16plus and 16i panels from a PC. It gives installers full access to programming, diagnostics and maintenance far faster than keypad entry, whether on-site or remotely. An essential installer tool for the Solution range, backed by a 3-year Australian warranty. Technical Specifications Model / SKU Bosch SW500B (BOSSW500B / F.01U.271.750) Type Solution Link RAS programming software Media USB Compatible Panels Solution 6000, 144, 64, 16plus (16+), 16i Function PC programming, diagnostics & maintenance Warranty 3 Years (Australia) Downloads SW500B DatasheetBosch Solution Link Quick Start GuideBosch Solution Link User Manual Frequently Asked Questions Which panels does SW500B program?It programs Bosch Solution 6000, 144, 64, 16plus and 16i control panels. What is in the box?The Solution Link RAS software supplied on a USB. Do I still need a connection lead?Yes — to connect the PC to the panel you also need a programming lead such as the Bosch CM910 (Solution 6000). What does the software do?It provides full PC-based programming, diagnostics and maintenance of the panel, much faster than programming from a keypad. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $73.00

• 

  Bosch Bosch IUI-SOL-TS5 — TouchOne Mini 5" Touchscreen Codepad (Solution 2000/3000)

   

  5" Colour Touchscreen · TouchOne Mini · Solution 2000/3000 · Made in GermanyTouch CodepadIUI-SOL-TS5 TouchOne Mini Touchscreen Codepad — Australian Stock & 3-Year Warranty The Bosch IUI-SOL-TS5 TouchOne Mini brings smartphone-style simplicity to your Bosch Solution 2000 or 3000 alarm. Its 5-inch full-colour touchscreen replaces traditional rubber buttons with an intuitive graphic interface — arm, disarm and bypass zones with a single touch. Dedicated on-screen Fire, Medical and Police icons put emergency signalling at your fingertips, while the slim wall-mount profile looks more like a smart-home controller than an alarm keypad. Backed by a 3-year Australian warranty. Screen 5" Colour Touch Control One-Touch Panels Sol 2000/3000 Warranty 3 Years AU Vibrant 5" Display A high-resolution colour touchscreen that is simple and satisfying to navigate. One-Touch Operation Arm, disarm and bypass zones with a single tap — no memorising button sequences. Emergency at a Tap Dedicated on-screen icons for Fire, Medical and Police emergencies. Sleek Modern Look A thin-profile wall mount that complements contemporary interiors. Technical Specifications Model / SKU IUI-SOL-TS5 Screen Size 5-inch colour touchscreen Compatibility Bosch Solution 2000 & 3000 Colour White (plastic) Operating Temperature 0° to +45°C Mounting Slim-profile wall mount Warranty 3 Years (Australia) Downloads IUI-SOL-TS5 DatasheetBosch TouchOne Mini Quick Start GuideBosch TouchOne Mini User Manual Frequently Asked Questions Is the TouchOne Mini compatible with the Solution 6000?No. The IUI-SOL-TS5 is designed for the Solution 2000 and 3000. The 6000 uses a different keypad range. Can I view my CCTV cameras on this screen?No. The screen is dedicated to alarm control and does not display live video feeds. Can I mix it with other keypads?Yes. You can run up to four keypads on the panel, so the TouchOne Mini can sit alongside an icon or text codepad. How is it powered and wired?It connects over the SDI2 data bus and is powered from the panel at 12 VDC — no separate supply required. Is it hard to operate for less tech-savvy users?No. The graphic interface is very intuitive, with large clearly labelled buttons for everyday arming and disarming. What is in the box?The IUI-SOL-TS5 TouchOne Mini codepad with slim wall-mount bracket, ready to wire to a Solution 2000 or 3000 panel. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $369.00

• 

  Bosch Bosch RFDW-SM — RADION Wireless Reed Switch Door/Window Contact, 20mm Gap (White)

   

  RADION · 433MHz · 20mm Gap · Surface MountWireless ReedRFDW-SM Wireless Reed Contact — Australian Stock & 3-Year Warranty The Bosch RFDW-SM is a compact RADION-series wireless reed switch for doors and windows. When the door or window opens, the magnet separates from the reed switch and the contact reports the event wirelessly to the alarm, giving reliable perimeter protection with no cabling. With a generous 20mm detection gap and a discreet white surface-mount housing, it is quick to fit to almost any frame — all backed by a 3-year Australian warranty. Frequency 433 MHz Detection Gap 20 mm Power 1x AAA Mounting Surface Wireless Perimeter Protection Reports door and window openings to the alarm with no cabling to run. Generous 20mm Gap A 20mm detection gap tolerates real-world frame movement and alignment for reliable triggering. Discreet Surface Mount Compact white housing fits neatly on most door and window frames. RADION Reliability Uses Bosch RADION 433MHz wireless for dependable, supervised communication. Technical Specifications Model / SKU Bosch RFDW-SM (BOSRFDW-SM) Series RADION Device Type Wireless reed switch (door/window contact) Frequency 433 MHz Detection Gap 20 mm Battery 1x AAA (1.5V) Colour White Mounting Surface mount Requires Bosch B810 RADION receiver Warranty 3 Years (Australia) Downloads RFDW-SM DatasheetBosch Reed Contact Quick Start GuideBosch Reed Contact User Manual Frequently Asked Questions What is the RFDW-SM?A RADION wireless reed switch that detects when a door or window opens and reports it to the alarm system wirelessly. Does it need a receiver?Yes. It requires a Bosch B810 RADION receiver to operate on the alarm system. Which panels does it suit?It works with Bosch RADION-capable systems such as Solution 3000 via the B810 receiver; it is not compatible with Solution 2000 or Solution 6000. What is the detection gap?Up to 20mm between the contact and its magnet before the alarm triggers. What battery does it use?A single AAA 1.5V battery. How is it mounted?It surface mounts to the door or window frame with the magnet on the moving leaf. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $118.99

• 

  Bosch Bosch BOSICP-SOL3-P — Solution 3000 Hardwired Alarm Panel with Black Enclosure (8/16 Zone)

   

  Solution 3000 · Hardwired · 8/16 Zone · Hybrid WirelessSolution 3000 PanelBOSICP-SOL3-P Alarm Panel — Australian Stock & 3-Year Warranty The Bosch BOSICP-SOL3-P (product no. F.01U.292.967) is the hardwired Solution 3000 control panel supplied on its black enclosure-mount PCB, purpose-built for Australian homes and small commercial sites. It offers 8 to 16 fully programmable zones, partitioning into 2 independent areas, STAY/AWAY arming and support for up to 16 RADION wireless devices for a true hybrid system. With 41 codes (1 installer, 20 users, 20 keyfobs), a built-in PSTN dialler and RSC+ app readiness via an IP module, it is a proven, scalable panel backed by a 3-year Australian warranty. Zones 8 / 16 Split Areas 2 Partitions Wireless 16 Devices Users 20 + Keyfobs Hybrid Wired & Wireless Run up to 16 hardwired zones and add RADION wireless PIRs, reeds and keyfobs for flexible retrofits. Two Independent Areas Partition the system into two areas — arm the house and garage separately from any keypad. Smartphone Control Add a Bosch IP module for the RSC+ app: remote arm/disarm and instant push notifications. Australian Ready Built-in PSTN dialler plus IP reporting paths suit NBN homes and monitored installations. Technical Specifications Model / SKU BOSICP-SOL3-P (F.01U.292.967) Series Bosch Solution 3000 Zones 8 / 16 split, fully programmable Areas 2 independent partitions Outputs 4 outputs Users / Codes 41 codes (1 installer, 20 users, 20 keyfobs) Wireless Up to 16 RADION devices Keypads Up to 4 Event Log 256 events Communications Built-in PSTN dialler; IP/app ready via module Power 18 VAC Dimensions 306 x 262 x 84 mm Weight 2.5 kg Warranty 3 Years (Australia) Downloads BOSICP-SOL3-P DatasheetBosch Alarm Panel Quick Start GuideBosch Alarm Panel User Manual Frequently Asked Questions Which keypads work with the Solution 3000?All Solution 2000/3000 codepads — the Icon (IUI-SOL-ICON), Alphanumeric (IUI-SOL-TEXT) and TouchOne touchscreen keypads. Does it support wireless sensors?Yes. Unlike the Solution 2000, the 3000 supports up to 16 Bosch RADION wireless devices with a compatible receiver. Can I control it from my phone?Yes. Add a Bosch B426-M IP module for the RSC+ app, enabling remote arm/disarm and push alerts. Is this NBN compatible?Yes. Report over IP via an Ethernet module, bypassing the old phone line for monitored or self-monitored setups. What power supply does it need?18 VAC via a Bosch plug-pack, with a 12 V 7 Ah backup battery for mains-fail operation. Does it come with a keypad?No. This panel ships on its black enclosure PCB; add a codepad and sensors, or choose a complete Solution 3000 kit. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $270.00

• Save -$6.00

  Bosch Bosch ICP-SOL2-P — Solution 2000 Control Panel PCB (8-Zone Replacement Board)

   

  Solution 2000 · Control PCB · 8 Zone · Replacement BoardSolution 2000 PCBBosch ICP-SOL2-P Control Panel PCB — Australian Stock & 3-Year Warranty The Bosch ICP-SOL2-P is the genuine Solution 2000 control panel PCB — the board-only version supplied without an enclosure, power supply, battery or sensors. It is the ideal replacement for a surge-damaged or faulty Solution 2000, or the starting point for a custom installer build. It delivers 8 fully programmable zones, 2 independent areas, up to 32 user codes and RSC+ app support via a Bosch IP module. Being a genuine Bosch part it includes the standard accessory pack (resistors, battery and phone leads) and is backed by a 3-year Australian warranty. Zones 8 Programmable Areas 2 Partitions Users 32 Codes Type PCB Only Genuine Replacement Board Restore a surge-damaged Solution 2000 without buying a full new kit — reuse your keypad and sensors. Custom Installer Builds Board-only supply lets installers mount it in a custom enclosure for tailored deployments. Smartphone Ready Add a Bosch B426-M IP module for the RSC+ app: remote arm/disarm and push notifications. Accessory Pack Included Ships with resistors, battery leads and phone cable adaptor as standard for a Bosch part. Technical Specifications Model / SKU ICP-SOL2-P Series Bosch Solution 2000 Zones 8 fully programmable (hardwired) Areas 2 independent partitions Users Up to 32 user codes; 21 keyfobs (with receiver) Keypads Up to 4 (Icon, Alphanumeric, Touchscreen) App RSC+ via B426-M IP module Supplied As PCB only (no enclosure/PSU/battery/sensors) Included Resistors, battery leads, phone cable adaptor Power 18 VAC (via plug-pack, sold separately) Warranty 3 Years (Australia) Downloads ICP-SOL2-P DatasheetBosch Alarm Panel Quick Start GuideBosch Alarm Panel User Manual Frequently Asked Questions Is this the board only?Yes. The ICP-SOL2-P is the PCB only — it does not include the metal enclosure, power supply, battery or sensors. Will my existing keypads work?Yes. It is compatible with all Solution 2000/3000 keypads including Icon, Alphanumeric and Touchscreen models. Does it include resistors and battery leads?Yes. As a genuine Bosch part it ships with the standard accessory pack (resistors, battery leads and phone cable adaptor). Can I control it from my phone?Yes. Add a Bosch B426-M IP module for the RSC+ app with remote arming and notifications. I need the full system — what should I buy?For a fresh install choose a complete Solution 2000 kit with enclosure, battery, siren and PIR sensors. Does it support wireless sensors?It supports wireless keyfobs via a receiver; for wireless PIRs and reeds step up to the Solution 3000. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $195.00 $189.00

• 

  Bosch Bosch HCT-4 — 4-Button Wireless Remote Control (433MHz)

   

  4-Button · 433MHz · Relay Control · Compact Fob4-Button 433MHz FobHCT-4 4-Button Wireless Remote — Australian Stock & 3-Year Warranty The Bosch HCT-4 is a compact 4-button 433MHz handheld wireless remote built for relay-based Bosch receiver systems. Each button can trigger a separate relay output, making it ideal for garage doors, gates, output switching and simple alarm arm/disarm tasks. It pairs with compatible Bosch receiver platforms such as the WE800EV2 and RE005EV2 rather than native RADION alarm integration. Australian stock, backed by a 3-year warranty. Buttons 4-Channel Frequency 433 MHz Output Relay Trigger Use Gate / Garage 4-Channel Control Four independent buttons trigger separate relay outputs for multiple doors, gates or switching tasks from one fob. Reliable 433MHz Bosch 433MHz transmission delivers stable, everyday handheld operation with a practical working range. Relay-Based Flexibility Works with compatible Bosch receivers to drive relay outputs — perfect for automation and simple arm/disarm. Compact & Pocketable Slim keyfob format that carries easily on a keyring for convenient daily use. Technical Specifications Model / SKU Bosch HCT-4 Type Handheld wireless remote / key fob Buttons 4-channel Frequency 433 MHz Output Relay trigger (via compatible receiver) Compatible Receivers WE800EV2, RE005EV2 (relay-based) Typical Use Garage doors, gates, output switching, arm/disarm Power Battery powered Warranty 3 Years (Australia) Downloads HCT-4 DatasheetBosch Remote Quick Start GuideBosch Remote User Manual Frequently Asked Questions Which receiver does the HCT-4 need?It works with compatible Bosch relay-based receivers such as the WE800EV2 and RE005EV2 — the receiver drives the relay output. How many buttons does it have?Four channels, each able to trigger a separate relay output for different doors, gates or functions. What frequency does it use?433 MHz, the standard Bosch remote-control band in Australia. Can I use it to arm and disarm an alarm?Yes, via a relay input on your panel. It is a relay-triggered remote rather than a native RADION alarm fob. Is it the same as the HCT-4UL?No — the HCT-4 and HCT-4UL are different Bosch remotes with different receiver compatibility. Match the remote to your receiver. Does it need a battery?Yes, it is battery powered and includes low-battery indication on supported versions. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $59.00

• 

  Bosch Bosch CM368B — Solution 6000 3G/4G + Ethernet Plug-in Module (BYO SIM)

   

  Genuine Bosch · 3G/4G + Ethernet · Dual-Path IPBosch CM368BCM368B Solution 6000 3G/4G + Ethernet Module — Australian Stock & 3-Year Warranty The Bosch CM368B (model DFXCM368B) is a plug-in communication module that adds 3G/4G cellular reporting and built-in Ethernet to the Bosch Solution 6000 alarm panel, giving you dual-path IP monitoring and app connectivity from a single blue PCB. With one built-in SIM socket it lets you bring your own carrier SIM (BYO SIM) for cellular reporting, while the on-board Ethernet port handles IP communication over your network. A neat, enclosure-mounted upgrade for reliable always-connected monitoring. Backed by our 3-year Australian warranty and local tech support. Cellular 3G / 4G Network Built-in Ethernet SIM BYO (1x socket) Fits Solution 6000 Dual Communication Paths Combines 3G/4G cellular and built-in Ethernet for redundant, always-connected alarm reporting. Bring Your Own SIM Single built-in SIM socket accepts a standard carrier SIM so you control your own data plan. App-Ready IP Built-in Ethernet enables IP monitoring and remote app control on your Solution 6000. Neat Plug-in Install Enclosure-mounted blue PCB plugs straight into the panel for a tidy, serviceable upgrade. Technical Specifications Model / SKU Bosch CM368B (DFXCM368B) Type Plug-in 3G/4G + Ethernet communication module Cellular 3G / 4G (BYO SIM) Network Built-in Ethernet SIM 1x built-in SIM socket Mounting Enclosure-mounted PCB Compatible Panels Solution 6000 Warranty 3 Years (Australia) Downloads CM368B DatasheetBosch Communication Module Quick Start GuideBosch CM368B Installer Manual Frequently Asked Questions Which panel does the CM368B fit?It is a plug-in module for the Bosch Solution 6000 alarm panel. Do I need to supply a SIM card?Yes. The CM368B is BYO SIM — fit your own carrier SIM into the built-in socket for cellular reporting. Does it also provide Ethernet?Yes. It has built-in Ethernet as well as 3G/4G cellular, so you can run dual-path IP and cellular monitoring. What's the difference between the CM368B and MY368AU?They are the same module family; the CM368B is BYO SIM while the MY368AU ships for use with a MyAlarm SIM subscription. How does it mount?The blue PCB plugs into the Solution 6000 and mounts inside the panel enclosure. What's in the box?The CM368B module PCB. A SIM card is not included — you supply your own. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $459.00

• 

  Bosch Bosch MY368AU — Solution 6000 3G/4G + Ethernet Module (MyAlarm SIM)

   

  Genuine Bosch · 3G/4G + Ethernet · MyAlarm SIMBosch MY368AUMY368AU Solution 6000 3G/4G + Ethernet Module — Australian Stock & 3-Year Warranty The Bosch MY368AU is a plug-in communication module that adds 3G/4G cellular reporting and built-in Ethernet to the Bosch Solution 6000, supplied for use with a MyAlarm SIM subscription for reliable, ready-to-go monitored connectivity. It delivers fast, dependable dual-path communication so your system stays connected for real-time monitoring and app control. The MY368AU requires panel firmware version 2.51.04 or higher and an active MyAlarm SIM subscription. Backed by our 3-year Australian warranty and local tech support. Cellular 3G / 4G Network Built-in Ethernet SIM MyAlarm subscription Panel FW v2.51.04+ Dual Communication Paths Combines 3G/4G cellular and built-in Ethernet for redundant, always-connected alarm reporting. MyAlarm SIM Ready Supplied for use with a MyAlarm SIM subscription so monitored connectivity is ready to activate. Real-Time Monitoring Reliable, fast connectivity keeps your Solution 6000 online for live monitoring and app control. Latest Panel Features Unlocks the newest panel features when running firmware version 2.51.04 or higher. Technical Specifications Model / SKU Bosch MY368AU Type Plug-in 3G/4G + Ethernet communication module Cellular 3G / 4G (MyAlarm SIM) Network Built-in Ethernet SIM MyAlarm SIM subscription required Panel Firmware Version 2.51.04 or higher Mounting Enclosure-mounted PCB Compatible Panels Solution 6000 Warranty 3 Years (Australia) Downloads MY368AU DatasheetBosch Communication Module Quick Start GuideBosch MY368AU Installer Manual Frequently Asked Questions Which panel does the MY368AU fit?It is a plug-in module for the Bosch Solution 6000 alarm panel. Do I need a SIM subscription?Yes. The MY368AU is supplied for use with a MyAlarm SIM subscription, which must be active for cellular reporting. What panel firmware is required?The panel must be running firmware version 2.51.04 or higher to support the MY368AU. How is this different from the CM368B?Same module family: the MY368AU uses a MyAlarm SIM subscription, whereas the CM368B is BYO SIM. Does it provide both cellular and IP?Yes. It combines 3G/4G cellular with built-in Ethernet for dual-path monitored communication. What's in the box?The MY368AU module PCB. The MyAlarm SIM subscription is arranged separately. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $279.00

• 

  Bosch Bosch WE800EV2 Kit — 433MHz Wireless Receiver + 2x 4-Button Key Fobs

   

  433MHz · Receiver + 2 Fobs · Relay ControlWE800EV2 KitWE800EV2 Wireless Remote Kit — Australian Stock & 3-Year Warranty The Bosch WE800EV2KIT is a flexible 433MHz wireless remote-control system that includes 1 x WE800EV2 receiver and 2 x 4-button key fobs. The receiver drives a relay output that connects to a panel keyswitch or programmable input, so you can remotely arm/disarm an alarm or trigger gates, garages and outputs. Because it works via relay rather than native wireless, it suits Bosch Solution 2000, 3000 and 4000 panels. Australian stock, backed by a 3-year warranty. Includes RX + 2 Fobs Frequency 433 MHz Output Relay Suits Sol 2000/3000/4000 Complete Kit Receiver plus two 4-button fobs — ready to add wireless control to an existing panel or automation setup. Relay-Based Flexibility The receiver relay wires to a keyswitch or programmable input, working across Solution 2000, 3000 and 4000. Multi-Function Fobs Four buttons per fob let you arm, disarm and trigger outputs such as gates, garages, lights or sirens. Installer Friendly Simple COM/NO/NC wiring and straightforward programming make for a fast, reliable install. Technical Specifications Model / SKU Bosch WE800EV2KIT Includes 1 x WE800EV2 receiver, 2 x 4-button key fobs Frequency 433 MHz Output Relay (COM / NO / NC) Connection Panel keyswitch or programmable input Suits Bosch Solution 2000 / 3000 / 4000 (via relay) Typical Use Arm/disarm, gate, garage, output switching Warranty 3 Years (Australia) Downloads WE800EV2 DatasheetBosch WE800EV2 Quick Start GuideBosch WE800EV2 User Manual Frequently Asked Questions What's in the kit?One WE800EV2 receiver and two 4-button wireless key fobs. Which panels does it work with?Bosch Solution 2000, 3000 and 4000 — it triggers via a relay output rather than native wireless integration. How does it wire in?The receiver relay (COM/NO/NC) connects to a panel keyswitch or programmable input to arm/disarm or trigger outputs. What frequency does it use?433 MHz, the standard Bosch wireless band in Australia. Can I control a gate or garage with it?Yes — the relay output can drive gates, garages, lights or sirens as well as arm/disarm. How is it different from the B810?The B810 offers full RADION integration on Solution 3000; the WE800EV2 is a simpler relay-based remote for 2000/3000/4000. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $199.00

• Save -$21.00

  Bosch Bosch RFPR-12 — RADION Wireless Pet-Friendly PIR Motion Sensor (12x12m)

   

  RADION · Wireless · Pet-Friendly · 433MHz Wireless Pet PIR Bosch RFPR-12 RADION Wireless Pet PIR — Australian Stock & 3-Year Warranty The Bosch RFPR-12 (BOSRFPR-12 / F.01U.389.907) is a RADION 433 MHz wireless pet-friendly PIR that adds cable-free motion detection to your Bosch alarm. Covering a 12 x 12 m area with pet immunity, it lets you protect a room without triggering false alarms from a household pet. Fully supervised for low-battery, cover-tamper and removal conditions, it runs up to five years on a single user-replaceable CR123A battery. The RFPR-12 requires a Bosch B810 RADION receiver (or RFRC-STR2) on the alarm panel. Backed by a 3-year Australian warranty. Coverage 12 x 12 m Signal 433.42 MHz Battery CR123A, ~5yr Pet Immunity Yes Pet-Friendly Pet immunity ignores a household pet while still detecting human intruders across the room. Fully Wireless RADION 433 MHz communication means no cabling — ideal for retrofits and hard-to-wire rooms. Up to 5-Year Battery Runs up to five years on one user-replaceable CR123A lithium battery. Supervised Security Monitored for low battery, cover tamper and removal from the mounting surface. Technical Specifications Model / SKU Bosch RFPR-12 (BOSRFPR-12) Product No. F.01U.389.907 Series RADION (wireless) Detection Pattern 12 x 12 m, pet-friendly Wireless Frequency 433.42 MHz Battery 1x CR123A lithium (3.3 V) Battery Life Up to 5 years Supervision Low battery, cover & removal tamper Receiver Required Bosch B810 / RFRC-STR2 Operating Temperature -10 – 40 °C Dimensions (H x W x D) 111 x 60 x 43 mm Warranty 3 Years (Australia) Downloads RFPR-12 Datasheet Bosch RADION PIR Quick Start Guide Bosch RADION PIR User Manual Frequently Asked Questions What receiver does the RFPR-12 need?It requires a Bosch B810 RADION receiver (or RFRC-STR2) connected to your Solution 2000/3000/6000 or compatible panel. How does pet immunity work?The optics and processing are tuned to ignore a typical household pet at floor level while still detecting a standing person. What battery does it use and how long does it last?One user-replaceable CR123A lithium battery, lasting up to five years. Is it wired or wireless?Fully wireless — it communicates on 433.42 MHz RADION with no cabling to the panel. What is in the box?The detector, a CR123A battery, an installation guide and a hardware pack. Is tamper protection included?Yes — it is supervised for low battery, cover tamper and removal from its mounting surface. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $132.00 $111.00

• 

  Bosch Bosch ICP-SOL-ENC — Metal Enclosure (White) for Solution 2000 / 3000

   

  Genuine Bosch · White Steel · Solution 2000/3000 · Tamper-Ready Bosch White Enclosure ICP-SOL-ENC Metal Enclosure — Australian Stock & 3-Year Warranty The Bosch ICP-SOL-ENC is a genuine white powder-coated steel enclosure that houses the control panel PCB, backup battery and plug pack for Bosch Solution 2000 and Solution 3000 alarm systems. It provides a secure, tidy and professional install with a lockable hinged cover, cable entry points and mounting standoffs for the board and a 12V 7Ah SLA battery. The clean white finish suits garages, cupboards and plant rooms. Genuine Bosch hardware, backed by a 3-year Australian warranty. Technical Specifications Model / SKU ICP-SOL-ENC (BOSICP-SOL-ENC) Suits Panels Bosch Solution 2000 / Solution 3000 Type Metal panel enclosure Colour White Material Powder-coated steel Battery Space Fits 12V 7Ah SLA backup battery Warranty 3 Years (Australia) Downloads ICP-SOL-ENC Datasheet Bosch Enclosure Quick Start Guide Bosch Enclosure User Manual Frequently Asked Questions Which panels fit the ICP-SOL-ENC?It houses the Bosch Solution 2000 (ICP-SOL2-P) and Solution 3000 (ICP-SOL3-P) control panel PCBs. Is the panel board included?No. This is the enclosure only — the PCB, keypad, plug pack and battery are ordered separately. Does a 7Ah battery fit inside?Yes. There is room for a standard 12V 7Ah sealed lead-acid backup battery beside the board. How does it compare to the MW250?Both suit Solution 2000/3000 panels; the ICP-SOL-ENC ships in white while the MW250 is the classic Bosch box — choose the finish that best suits your install location. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $69.00

• Save -$50.00

  Bosch Bosch B810 DLX Wireless Key Fob Kit — B810 RADION Receiver + 2x RFKF-FBS Remotes

   

  RADION · B810 Receiver + 2 Fobs · Solution 3000B810 DLX Fob KitB810 DLX Wireless Key Fob Kit — Australian Stock & 3-Year Warranty The Bosch B810 DLX Wireless Key Fob Kit is the fastest way to add wireless remote control to a Bosch Solution 3000 system. It bundles 1 x B810 RADION wireless receiver with 2 x RFKF-FBS 4-button encrypted key fobs, giving two users quick arm, disarm and programmable-button control from their pockets. The B810 also opens the door to the wider RADION wireless range — PIRs, reeds and glass-break sensors. Australian stock, backed by a 3-year warranty. Includes RX + 2 Fobs Frequency 433 MHz Fobs Encrypted Panel Solution 3000 Complete Wireless Kit Receiver plus two 4-button fobs — everything two users need for wireless arm/disarm on a Solution 3000. Encrypted RFKF-FBS Fobs 4-button RADION fobs with encryption for secure daily control including panic and programmable functions. Expandable Receiver The B810 supervises up to 504 wireless points, 1000 fobs and 8 repeaters — room to grow your system. SDI2 Integration Connects RADION peripherals to the panel via the SDI2 bus with cover and wall tamper protection. Technical Specifications Model / SKU Bosch B810 DLX Kit (BOSB810-DLX-KITSET) Includes 1 x B810 RADION receiver, 2 x RFKF-FBS 4-button fobs Frequency 433 MHz Bus / Connection SDI2 Wireless Points Supported Up to 504 Key Fobs Supported Up to 1000 Repeaters Supported Up to 8 Compatible Panel Bosch Solution 3000 Warranty 3 Years (Australia) Downloads B810 DLX Kit DatasheetBosch RFKF-FBS Key Fob GuideBosch B810 User Manual Frequently Asked Questions What does the B810 DLX kit include?One B810 RADION wireless receiver and two RFKF-FBS 4-button encrypted key fobs. Which panel is it for?The Bosch Solution 3000. RADION wireless is intended for Solution 3000, not Solution 2000. Can I add more wireless devices later?Yes. The B810 supervises up to 504 wireless points, so you can add RADION PIRs, reeds and glass-break sensors. How does the receiver connect?Via the SDI2 bus to your compatible Bosch control panel. What do the RFKF-FBS fobs do?They provide secure 4-button encrypted control for arming, disarming and programmable functions. How many fobs can the system hold?The B810 supports supervision of up to 1000 key fobs. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $299.00 $249.00

• 

  Bosch Bosch ISC-PDL1-W18G — Pro Series Hardwired Pet-Friendly TriTech PIR Motion Sensor (18m)

   

  Pro Series · TriTech MW+PIR · Pet-Friendly · Hardwired Pro TriTech PIR ISC-PDL1-W18G Pro Series TriTech Pet-Friendly PIR — Australian Stock & 3-Year Warranty The Bosch ISC-PDL1-W18G is a hardwired Pro Series TriTech motion detector that combines microwave (10.525 GHz) and passive infrared sensing with Tri-focus optics for exceptional false-alarm immunity. Both detection technologies must agree before an alarm is triggered, making it far more resistant to drafts, heat and stray movement than a standard PIR. It reliably ignores pets up to 4.5 kg and offers field-selectable coverage of 18 x 25 m or a focused 8 x 10 m short range. Ideal for Bosch Solution 2000, 3000 and 6000 systems, it ships with a 3-year Australian warranty. Coverage 18 x 25m Technology MW + PIR Pet Immunity Up to 4.5kg Power 9-15VDC Dual-Tech Verification Microwave (10.525 GHz) and PIR sensing must both agree before an alarm is raised, dramatically reducing false alarms in demanding environments. Tri-Focus Optics Three-zone optical system with Sensor Data Fusion delivers sharp, dependable catch performance across the full field of view. True Pet Immunity Reliably ignores pets up to 4.5 kg so cats and small dogs can move freely without triggering the alarm. Selectable Coverage Choose a wide 18 x 25 m pattern or a focused 8 x 10 m short range to match the protected space. Technical Specifications Model / SKU Bosch ISC-PDL1-W18G Series Pro Series Sensor Type TriTech (Microwave + PIR), Tri-Focus optics Microwave Frequency 10.525 GHz Pet Immunity Up to 4.5 kg Coverage 18 x 25 m, or 8 x 10 m field selectable Outputs 1x N/C alarm output (dry), tamper N/C Power Supply 9-15 VDC Mount Height 2 m - 3 m Housing Plastic, wall mount Ingress / Impact IP41 / IK04 Dimensions (H x W x D) 136 x 69 x 58 mm Warranty 3 Years (Australia) Downloads ISC-PDL1-W18G Datasheet Bosch PIR Sensor Quick Start Guide Bosch PIR Sensor User Manual Frequently Asked Questions What is the difference between a PIR and a TriTech detector?A standard PIR uses infrared only. The TriTech ISC-PDL1-W18G adds microwave sensing (10.525 GHz); both technologies must agree before an alarm triggers, giving much stronger false-alarm immunity. Will it ignore my pets?Yes. It offers reliable pet immunity for animals up to 4.5 kg, so cats and small dogs won't trigger false alarms while genuine intruders are still detected. What height should it be mounted at?Install the detector on a wall between 2 m and 3 m high for correct coverage and pet immunity. How is it wired and powered?It is hardwired and runs on 9-15 VDC, providing one N/C dry alarm output plus an N/C tamper contact for connection to your panel's zone inputs. Which alarm panels is it compatible with?It works with any conventional hardwired panel and pairs perfectly with Bosch Solution 2000, 3000 and 6000 control panels. What area does it cover?Coverage is field-selectable between a wide 18 x 25 m pattern and a focused 8 x 10 m short range. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $119.00

• 

  Bosch Bosch RFRC-STR2 — B810 RADION Wireless Receiver (433MHz, Integration)

   

  RADION · 433MHz · Integration · SDI2RFRC-STR2 RADION RXRFRC-STR2 B810 RADION Wireless Receiver — Australian Stock & 3-Year Warranty The Bosch RFRC-STR2 is the B810 RADION wireless receiver supplied for integration and third-party alarm applications. It brings the full RADION wireless range — PIRs, reed contacts, glass-break detectors, key fobs and panic buttons — onto a compatible Bosch control system via the SDI2 bus. With supervision of up to 504 wireless points, 1000 key fobs and 8 repeaters, plus dual antennas and tamper protection, it delivers reliable wireless expansion. Australian stock, backed by a 3-year warranty. Frequency 433 MHz Points Up to 504 Key Fobs Up to 1000 Bus SDI2 Integration Ready The RFRC-STR2 build of the B810 receiver suits integration and third-party alarm applications needing RADION wireless. High Capacity Supervises up to 504 wireless points, 1000 key fobs and 8 repeaters for scalable wireless coverage. Dual Antenna Reliability Two internal antennas give spatial and polar RF reception, with detection and reporting of RF interference. Tamper Protected Cover and wall tamper protection plus external status LEDs for secure installation and easy diagnostics. Technical Specifications Model / SKU Bosch RFRC-STR2 (B810) Series RADION Type Wireless receiver (integration) Frequency 433 MHz Bus / Connection SDI2 Wireless Points Supported Up to 504 Key Fobs Supported Up to 1000 Repeaters Supported Up to 8 Antennas Dual internal (spatial & polar) Mounting Wall mount Warranty 3 Years (Australia) Downloads RFRC-STR2 DatasheetBosch RFRC-STR2 Installation GuideBosch RFRC-STR2 User Manual Frequently Asked Questions What is the RFRC-STR2?It is the B810 RADION wireless receiver supplied for integration and third-party alarm applications. What wireless devices does it support?The full RADION range — PIRs, reed contacts, glass-break detectors, key fobs and panic buttons. How does it connect?Via the SDI2 bus to the compatible control system. How many devices can it supervise?Up to 504 wireless points, 1000 key fobs and 8 repeaters. What frequency does it use?433 MHz, the standard Bosch RADION band in Australia. Is it tamper protected?Yes — cover and wall tamper protection with RF interference detection. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $173.00

• 

  Bosch Bosch RF3405E — Classic Series Wireless Vibration & Reed Door Contact (433MHz)

   

  Classic Series · Wireless · Vibration + Reed · 433MHz Wireless Vib + Reed Bosch RF3405E Wireless Vibration & Reed Contact — Australian Stock & 3-Year Warranty The Bosch RF3405E (BOSRF3405E) is a Classic Series 433 MHz wireless door/window contact that combines an internal magnetic reed switch with a built-in vibration (inertia) sensor. It detects both opening (via the reed and magnet) and forced attack — such as someone trying to pry or lever a door — through the inertia sensor, with selectable gross or minor attack sensitivity. A supervised external loop and screw terminals let you add a wired contact, and a test mode simplifies commissioning. Requires a Bosch wireless receiver on the panel. Backed by a 3-year Australian warranty. Detection Reed + Vibration Signal 433 MHz Loop Supervised input Battery CR123A, ~3yr Two Sensors in One A magnetic reed contact detects opening while the inertia sensor catches forced attack on the door or frame. Adjustable Sensitivity Selectable gross or minor attack settings tune the vibration response to the door type. Supervised Loop Screw terminals and a supervised external input let you add a hardwired contact to the same wireless point. Fully Wireless 433 MHz communication with a built-in test mode makes install and commissioning quick. Technical Specifications Model / SKU Bosch RF3405E (BOSRF3405E) Series Classic Series (wireless) Sensors Magnetic reed + vibration (inertia) Sensitivity Selectable gross / minor attack External Input 1x supervised loop (screw terminals) Wireless Frequency 433 MHz Battery 1x CR123A lithium (3.3 V) Battery Life Approx. 3 years Mounting Surface Operating Temperature -20 – 60 °C Dimensions (H x W x D) 27 x 169 x 24 mm Warranty 3 Years (Australia) Downloads RF3405E Datasheet Bosch Wireless Contact Quick Start Guide Bosch Wireless Contact User Manual Frequently Asked Questions What receiver does the RF3405E need?It requires a Bosch RADION receiver such as the B810 (or RFRC-STR2) on your Solution panel to receive its 433 MHz signals. What does it detect?Both door/window opening via the magnetic reed switch and forced attack via the built-in vibration (inertia) sensor. Can I connect an extra wired contact?Yes — it has a supervised external loop with screw terminals so you can add a hardwired contact to the same point. Can I adjust the vibration sensitivity?Yes — selectable gross or minor attack settings let you match the response to the door or window. What battery does it use and how long does it last?One CR123A lithium battery, lasting around three years. How do I test it after installation?Use the built-in test mode to confirm reliable signalling before arming the system. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $169.00

• 

  Bosch Bosch ISC-PB1-100 — Hardwired 1-Button Panic Button with Tamper (Grey)

   

  Panic Button · 1-Button · Tamper · Hardwired Panic Button ISC-PB1-100 Panic Button — Australian Stock & 3-Year Warranty The Bosch ISC-PB1-100 is a hardwired single-button panic (hold-up) button that lets staff raise a silent or audible alarm the instant they feel threatened. Built on Bosch's reliable DC circuit technology (GLT), the prominent red button wires straight into an intrusion panel and includes a tamper contact to detect interference with the housing. The grey IP40 plastic surface housing supports surface or flush cable entry and accepts an optional cap with cover to guard against accidental activation. Operating on 12-30 VDC with a single N/C output, it suits counters, offices and reception desks. Backed by a 3-year Australian warranty. Type 1-Button Panic Security Tamper Contact Output 1x N/C Rating / Power IP40 / 12-30 VDC Instant Duress Alarm One firm press on the red button raises a hold-up alarm, ideal for reception desks, counters and offices where staff may need to summon help discreetly. DC Circuit Technology (GLT) Bosch's proven GLT design delivers dependable, low-current signalling that connects directly into the intrusion panel for reliable activation. Built-In Tamper An integrated tamper contact signals if the housing is opened or interfered with, keeping the device secure and supervised by the panel. Flexible Install The IP40 grey surface housing supports surface or flush cable entry and accepts an optional cap with cover to prevent accidental activation. Technical Specifications Model / SKU Bosch ISC-PB1-100 (BOSISC-PB1-100) Type Hardwired 1-Button Panic / Hold-Up Button Technology DC circuit technology (GLT) Button Single red button Tamper Tamper contact included Output 1x N/C Power Supply 12-30 VDC IP Rating IP40 Housing / Colour Plastic, Grey (surface mount) Cable Entry Surface or flush Accessories Compatible with optional cap / cover Warranty 3 Years (Australia) Downloads ISC-PB1-100 Datasheet Bosch Panic Button Quick Start Guide Bosch Panic Button User Manual Frequently Asked Questions What is the ISC-PB1-100 used for?It's a single-button panic (hold-up) button that lets staff instantly trigger a duress alarm from a counter, desk or office by pressing the red button. Does it latch, and how is it reset?The button uses a mechanical action that holds its state when pressed; after an activation it is reset at the button before the panel zone restores. Wire it to a 24-hour hold-up zone so it reports whether the system is armed or disarmed. Does it have a tamper?Yes. An integrated tamper contact signals the panel if the housing is opened or interfered with, keeping the device supervised. How do I wire and power it?It operates on 12-30 VDC and provides a single normally-closed (N/C) output that connects into an intrusion panel, typically as a dedicated 24-hour panic zone. How is it mounted?The grey IP40 housing surface-mounts with surface or flush cable entry. An optional cap with cover can be fitted to help prevent accidental presses. Which panels does it work with?As a standard N/C hold-up input it connects to intrusion panels such as the Bosch Solution 2000, 3000 and 6000, assigned to a 24-hour panic/hold-up zone. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $49.00

• 

  Bosch Bosch OD850-F1 — Classic Series Outdoor TriTech PIR Motion Sensor IP54 (15x15m)

  1 review

   

  Classic Series · Outdoor · TriTech · IP54 Outdoor TriTech PIR OD850-F1 Outdoor TriTech PIR — Australian Stock & 3-Year Warranty The Bosch OD850-F1 is a Classic Series outdoor TriTech motion detector built for reliable perimeter and exterior protection. Combining a dual-element passive infrared sensor with Linear Travel Distance (LTD) microwave processing and Motion Analyzer II, it delivers accurate 15×15m detection while resisting false triggers from drafts and insects. Rated IP54 for outdoor use, it offers both N/C and SPDT outputs, two sensitivity levels, selectable AND/OR mode and a timed relay adjustable from 2 seconds to 10 minutes. Perfect for yards, driveways and building exteriors. Backed by our 3-year Australian warranty. Coverage 15 × 15 m Rating IP54 Outdoor Power 10–15 VDC Microwave 10.525 GHz Built for Outdoors IP54-rated housing with draft and insect immunity keeps the OD850-F1 dependable across yards, driveways and building exteriors. TriTech Dual Technology Dual-element PIR with Motion Analyzer II plus LTD microwave signal processing ensures accurate catch performance and strong false alarm rejection. Flexible Detection Two sensitivity levels and selectable AND/OR mode let you tune the detector to the site, from busy perimeters to sensitive zones. Versatile Outputs Both N/C and SPDT relay outputs plus a timed relay adjustable from 2 seconds to 10 minutes suit alarm panels and automation triggers. Technical Specifications Model / SKU Bosch OD850-F1 Series Classic Series Detection Technology TriTech (Microwave + dual-element PIR) with Fresnel optics Detection Area 15 × 15 m Ingress Protection IP54 (outdoor rated) Alarm Outputs 1 × N/C + 1 × SPDT (NC/NO) Tamper Relay NC Timed Relay Output Adjustable 2 sec – 10 min Operating Voltage 10 – 15 VDC Microwave Frequency 10.525 GHz Installation Height 2.1 – 2.7 m Operating Temperature -35 – 54 °C Dimensions (H×W×D) 165 × 82.5 × 63.5 mm Warranty 3 Years (Australia) Downloads OD850-F1 Datasheet Bosch PIR Sensor Quick Start Guide Bosch PIR Sensor User Manual Frequently Asked Questions Can the OD850-F1 be used outdoors?Yes. It is IP54-rated for outdoor use, with draft and insect immunity, making it suited to yards, driveways and building exteriors. What mounting height does it need?Mount it to a plastic wall bracket at a height of 2.1 m to 2.7 m for the correct 15×15m detection pattern. How large an area does it cover?It provides a 15 × 15 m detection area, ideal for perimeters, side passages and exterior zones. How is it wired and powered?It is hardwired on 10–15 VDC and provides both an N/C output and an SPDT output, plus a timed relay adjustable from 2 seconds to 10 minutes. How is TriTech different from a standard PIR?TriTech combines dual-element PIR with microwave detection and requires both to agree before triggering, giving much better false alarm immunity outdoors. Which Bosch panels does it suit?It works with Bosch Solution 2000, 3000 and 6000 intrusion panels and other conventional zone inputs supporting N/C or SPDT wiring. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $290.00

• 

  Bosch Bosch B308 — 8-Output Hardwired Expander Module (8x Form C Relays, SDI2)

   

  Genuine Bosch · 8-Output Expander · Form C RelaysBosch B308B308 8-Output Hardwired Expander Module — Australian Stock & 3-Year Warranty The Bosch B308 is a hardwired output expander that adds eight Form C relay outputs to Bosch Solution 2000, Solution 3000 and G-Series panels over the SDI2 bus. Each relay is rated 1A at 5–24V DC with programmable output functions, ideal for driving sirens, strobes, door strikes, lighting and home-automation triggers. Easy-to-read switch addressing and a quick modular interconnect connector keep installation tidy and fast. Powered by 12V DC. Backed by our 3-year Australian warranty and local tech support. Outputs 8x Form C Relay Rating 1A @ 5–24V DC Bus SDI2 Wire Run Up to 305m Eight Relay Outputs Adds eight Form C relays to drive sirens, strobes, strikes, lighting and automation. Programmable Functions Each output is fully programmable to match the behaviour your system needs. Remote Control Allows remote control of outputs for flexible automation and event-driven switching. Fast Install Easy-to-read switch addressing and a quick modular interconnect connector speed up wiring. Technical Specifications Model / SKU Bosch B308 Type Hardwired 8-output expander Outputs 8x Form C relays Relay Rating 1A at 5–24V DC Bus SDI2 Nominal Voltage 12V DC Wire Length Up to 305 m Dimensions (H x W x D) 73.5 x 127 x 15 mm Weight 140 g Operating Temp 0°C to 49°C Compatible Panels Solution 2000/3000, G-Series Warranty 3 Years (Australia) Downloads B308 DatasheetBosch Output Expander Quick Start GuideBosch Output Expander User Manual Frequently Asked Questions Which panels does the B308 suit?It is an output expander for Bosch Solution 2000, Solution 3000 and G-Series panels via the SDI2 bus. How many outputs does it add?It provides eight Form C relay outputs, each with programmable functions. What can the relays switch?Each relay is rated 1A at 5–24V DC, suitable for sirens, strobes, door strikes, lighting and automation. Can outputs be controlled remotely?Yes. The B308 allows remote control of outputs for automation and event-driven switching. How is it powered?It runs on 12V DC from the panel or an auxiliary power supply such as the B520. What's in the box?The B308 output expander module PCB. An enclosure and mounting hardware are supplied separately. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $229.00

• 

  Bosch Bosch CC615GWF — Solution 6000 Panel PCB with Built-in IP & WiFi Keypad (144 Zone)

   

  Solution 6000 · Built-in IP · WiFi Keypad · 144 ZoneSolution 6000 IPBosch CC615GWF Solution 6000 IP Panel — Australian Stock & 3-Year Warranty The Bosch CC615GWF is a Solution 6000 panel PCB board kit with a built-in IP module and a colour WiFi keypad — a modern, app-ready package for larger Australian homes and commercial sites. It starts at 16 onboard zones (expandable to 144, wired or wireless), 5 outputs (expandable to 37), 8 areas and up to 990 PIN, token, keyfob and fingerprint users, plus integrated access control for up to 16 doors. IP reporting via CSV-IP, Connetix, SIA and MyAlarm keeps monitored and self-monitored sites connected. Backed by a 3-year Australian warranty. Zones 16 → 144 Areas 8 Partitions Connectivity IP + WiFi Users 990 Built-in IP + WiFi Keypad Ships with a colour WiFi keypad and onboard IP for fast setup and full app-based control. Scales to 144 Zones Start at 16 zones and expand to 144 wired or wireless, with outputs up to 37 for large sites. Access Control Built In Integrated access control for up to 16 doors with PIN, token, keyfob and fingerprint users. Flexible IP Reporting Report via CSV-IP, Connetix, SIA and MyAlarm for monitored and self-monitored Australian sites. Technical Specifications Model / SKU CC615GWF (BOSCC615GWF) Series Bosch Solution 6000 Zones 16 onboard, expandable to 144 (wired/wireless) Outputs 5 onboard, expandable to 37 Areas 8 partitions Users Up to 990 (PIN, token, keyfob, fingerprint) Access Control Up to 16 doors Communications Built-in IP; CID, SIA, Email, Voice, GSM-SMS, Connetix IP, CSV-IP WiFi IEEE 802.11 b/g/n Event Log 2000 events Power 16–18 VAC; 7.2 Ah backup battery Operating Temperature 0°C to +55°C Warranty 3 Years (Australia) Downloads CC615GWF DatasheetBosch Solution 6000 Quick Start GuideBosch Solution 6000 User Manual Frequently Asked Questions What is included in the CC615GWF?The Solution 6000 PCB with built-in IP module plus a colour WiFi keypad — ready for app-based setup and control. How many zones can it handle?16 onboard zones expandable to 144, wired or wireless, across up to 8 areas. Does it support access control?Yes. Integrated access control for up to 16 doors with PIN, token, keyfob and fingerprint users. What reporting formats does it use?CSV-IP, Connetix, SIA, MyAlarm plus CID, Email, Voice and GSM-SMS options. Is an enclosure included?No. Mount the PCB in a Bosch Solution 6000 metal enclosure with a suitable PSU and 7.2 Ah battery. Can I add more keypads and expanders?Yes. It supports additional Bosch keypads, zone/output expanders and readers over the RS485 LAN. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $430.00

• 

  Bosch Bosch CP737B & CP736B — LCD Alarm Keypad (Solution 2000/3000/6000)

   

  LCD Keypad · Backlit · Solution 2000/3000/6000 · Made in GermanyLCD KeypadCP737B & CP736B LCD Keypads — Australian Stock & 3-Year Warranty The Bosch CP737B and CP736B are professional LCD alarm keypads for the Bosch Solution 2000, 3000 and 6000 systems, delivering reliable control, clear status visibility and installer-friendly operation. The CP737B is the premium choice with an enhanced interface for modern installs and upgrades, while the CP736B is the cost-effective standard keypad ideal for everyday residential and commercial replacements. Both feature a backlit LCD for low-light visibility and are backed by a 3-year Australian warranty. Display Backlit LCD Panels Sol 2000/3000/6000 Models CP737B / CP736B Warranty 3 Years AU Wide Panel Compatibility Works across the Bosch Solution 2000, 3000 and 6000 platforms — among the most versatile Bosch keypads in Australia. Clear LCD Status An easy-to-read backlit LCD shows system status at a glance, day or night. Fast, User-Friendly Layout A logical keypad layout makes arming, disarming and everyday operation quick and simple. Installer-Friendly Straightforward wiring and configuration make it easy to install or use as a like-for-like replacement. Technical Specifications Models CP737B (premium) & CP736B (standard) Display Backlit LCD Compatibility Solution 2000, 3000 & 6000 Interface User-friendly keypad layout Best For New installs, upgrades & replacements Warranty 3 Years (Australia) Downloads CP737B DatasheetBosch Keypad Quick Start GuideBosch Keypad User Manual Frequently Asked Questions Are the CP737B and CP736B compatible with the Solution 3000?Yes. Both keypads are compatible with the Bosch Solution 2000, 3000 and 6000 alarm systems. What is the difference between the CP737B and CP736B?The CP737B is the premium keypad with an enhanced interface and modern design, while the CP736B is the cost-effective standard LCD keypad. Can I use these to upgrade an existing Bosch keypad?Yes. They are commonly used to replace or upgrade older Bosch keypads, subject to system compatibility. Which model should I choose?Choose the CP737B for modern installs and upgrades, or the CP736B for budget installs and straight replacements. Are they backlit for night use?Yes. Both feature a backlit interface for clear visibility in low light. Where are these keypads typically used?In homes, apartments, retail stores, offices, warehouses and commercial sites, as well as alarm upgrades and replacements. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $345.60 - $505.99

• 

  Bosch Bosch MW350 — Metal Enclosure for Solution 6000 & Solution 2000/3000

  1 review

   

  Genuine Bosch · Steel Enclosure · Solution 6000 · Surface Mount Bosch Sol6000 Enclosure MW350 Metal Enclosure — Australian Stock & 3-Year Warranty The Bosch MW350 is a genuine surface-mount steel enclosure built to house the control panel PCB, backup battery and plug pack for the Bosch Solution 6000 (and compatible Solution 2000/3000) alarm systems. Its strong steel construction, screwed cover and multiple mounting points deliver secure, tamper-resistant housing with tidy cable management and a professional finish. It is the standard back box used in most Solution 6000 installations. Genuine Bosch hardware, backed by a 3-year Australian warranty. Construction Steel Mounting Surface Cover Lockable Suits Solution 6000 Secure Housing Heavy steel body with a screwed cover protects the panel PCB and electronics from tampering and interference. Tidy Cable Management Multiple knockouts and mounting points keep zone, keypad and mains wiring neat and professional. Battery Ready Space for a 12V 7Ah SLA backup battery so the system rides through mains power outages. Installer Standard The go-to back box for Bosch Solution 6000 fit-outs, also compatible with Solution 2000/3000 boards. Technical Specifications Model / SKU MW350 (BOSMW350) Suits Panels Bosch Solution 6000 / 2000 / 3000 Type Metal panel enclosure Mounting Surface mount Material Steel Cover Screwed / lockable, tamper-ready Battery Space Fits 12V 7Ah SLA backup battery Warranty 3 Years (Australia) Downloads MW350 Datasheet Bosch Enclosure Quick Start Guide Bosch Enclosure User Manual Frequently Asked Questions Which panels does the MW350 suit?It is the standard enclosure for the Bosch Solution 6000 and is also compatible with Solution 2000/3000 control panel boards. Is the panel PCB included?No. The MW350 is the enclosure only. The control panel board, keypad, plug pack and battery are supplied separately. Is it surface or flush mounted?Surface mounted. It fixes to the wall via internal mounting holes and has a secure screwed cover. Will a backup battery fit?Yes. There is space for a 12V 7Ah sealed lead-acid battery alongside the PCB. Does it support a tamper switch?Yes. It accepts a cover/wall tamper micro-switch so opening the box triggers the panel. What material is it made from?Powder-coated steel for strength and long service life in Australian conditions. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $79.99

• 

  Bosch Bosch ISC-BPQ2-W12 — Blue Line Gen2 Hardwired Quad PIR Motion Sensor (12x12m)

   

  Blue Line Gen2 · Hardwired Quad PIR · 12x12m · Dynamic Temp CompensationBlue Line Gen2 Quad PIRISC-BPQ2-W12 Hardwired Quad PIR Sensor — Australian Stock & 3-Year Warranty The Bosch ISC-BPQ2-W12 is a Blue Line Gen2 hardwired quad PIR motion detector engineered for dependable 12m x 12m wall-to-wall indoor coverage. Its four-element quad sensing plus Dynamic Temperature Compensation delivers superior catch performance in changing conditions, while flexible mounting height with no adjustments and a self-locking enclosure with integrated bubble level cut installation time. Ideal for homes, offices, shops and warehouses running Bosch Solution alarm systems, every unit ships from Australian stock with a 3-year Australian warranty. Coverage 12m x 12m Detection Quad PIR Output N/C Relay + Tamper Power 9-15 VDC, 10mA Quad Element Sensing Four-element quad PIR delivers wall-to-wall catch performance and dependable detection across the full 12m x 12m field. Dynamic Temp Compensation Automatically adapts to ambient temperature changes so catch performance stays strong in any environment. Faster Installation Self-locking enclosure with integrated bubble level and flexible mount height without adjustments reduces install time and false alarms. Bosch Solution Ready Supervised N/C relay and tamper outputs wire straight into Bosch Solution 2000/3000/6000 hardwired zones. Technical Specifications Model / SKU ISC-BPQ2-W12 (Blue Line Gen2) Sensor Type Quad PIR Detection Radius 12m (12m x 12m area) Alarm Relay N/C Tamper Relay N/C Current Consumption 10 mA Operating Temperature -30°C to 55°C Dimensions (H x W x D) 105 x 61 x 44 mm Warranty 3 Years (Australia) Downloads ISC-BPQ2-W12 DatasheetBosch Quad PIR Sensor Quick Start GuideBosch Quad PIR Sensor User Manual Frequently Asked Questions What is a quad PIR sensor?A quad PIR uses four sensing elements instead of two, improving catch performance and consistency across the detection field while helping reject nuisance triggers. What coverage does the ISC-BPQ2-W12 provide?It provides 12m x 12m wall-to-wall coverage, suiting standard rooms, offices, retail and warehouse zones. What voltage and current does it need?It runs on 9-15 VDC and draws around 10 mA, with N/C alarm and N/C tamper relay outputs for standard wired zones. What mounting height is recommended?It offers flexible mounting height with no adjustments required, and the integrated bubble level helps you level it quickly during install. Which Bosch panels does it work with?It suits Bosch Solution 2000, Solution 3000 and Solution 6000 panels using standard hardwired alarm inputs. Is it pet-friendly?The ISC-BPQ2-W12 is a standard quad PIR. For pet immunity choose a Bosch pet-friendly model such as the ISC-BPR2-WP12. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $49.00

• 

  Bosch Bosch B810 — RADION Wireless Receiver (White, 433MHz, Solution 3000)

   

  RADION · 433MHz · SDI2 · Solution 3000B810 RADION RXB810 RADION Wireless Receiver — Australian Stock & 3-Year Warranty The Bosch B810 is the RADION wireless receiver that brings wireless devices into a Bosch Solution 3000 system. Connecting via the SDI2 bus, it supervises up to 504 wireless points, 1000 key fobs and 8 repeaters, letting you add wireless PIRs, reed contacts, glass-break detectors, key fobs and panic buttons without running cable. Dual internal antennas, RF interference detection and cover/wall tamper protection make for a reliable retrofit. Australian stock, backed by a 3-year warranty. Frequency 433 MHz Points Up to 504 Key Fobs Up to 1000 Bus SDI2 Full RADION Wireless Adds Bosch RADION PIRs, reeds, glass-break detectors, fobs and panic buttons to a Solution 3000 without cabling. High Capacity Supervises up to 504 wireless points, 1000 key fobs and 8 repeaters for homes through to larger sites. Dual Antenna Reliability Two internal antennas give spatial and polar RF reception, with detection and reporting of RF interference. Tamper Protected Cover and wall tamper protection plus external status LEDs for secure, easy installation and diagnostics. Technical Specifications Model / SKU Bosch B810 (BOSB810) Series RADION Type Wireless receiver Frequency 433 MHz Bus / Connection SDI2 Wireless Points Supported Up to 504 Key Fobs Supported Up to 1000 Repeaters Supported Up to 8 Antennas Dual internal (spatial & polar) Mounting / Colour Wall mount, White Power Multi-voltage, 10–14 VDC Compatible Panel Bosch Solution 3000 Warranty 3 Years (Australia) Downloads B810 DatasheetBosch B810 Quick Start GuideBosch B810 User Manual Frequently Asked Questions What does the B810 do?It connects Bosch RADION wireless devices — PIRs, reeds, glass-break sensors, fobs and panic buttons — to a Solution 3000 panel. Do I need it for wireless Bosch sensors?Yes. The B810 is required to enrol any RADION wireless device onto the system. Which panel is it for?The Bosch Solution 3000. It is not intended for Solution 2000 or Solution 6000. How does it connect to the panel?Via the SDI2 bus, with multi-voltage 10–14 VDC power. How many devices can it supervise?Up to 504 wireless points, 1000 key fobs and 8 repeaters. Is it tamper protected?Yes — it includes cover and wall tamper protection plus RF interference detection. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $99.00

• 

  Bosch Bosch MW250 Metal Enclosure — Solution 880 / 2000 / 3000 Panels

   

  Genuine Bosch · Steel Enclosure · Solution 880/2000/3000 · Tamper-Ready Bosch Steel Enclosure MW250 Metal Enclosure — Australian Stock & 3-Year Warranty The Bosch MW250 (product no. F.01U.271.828) is a genuine powder-coated steel enclosure that houses the control panel PCB, backup battery and plug pack for Bosch Solution 880, Solution 2000 and Solution 3000 alarm systems. Measuring 260 x 260 x 70 mm externally, it gives a clean, secure, professional installation with a lockable hinged cover and mounting points for the board and 12V 7Ah SLA battery. Buy with confidence — genuine Bosch hardware backed by a 3-year Australian warranty. Technical Specifications Model / SKU MW250 (BOSMW250) Product No. F.01U.271.828 Suits Panels Bosch Solution 880 / 2000 / 3000 External Dimensions 260 (W) x 260 (H) x 70 (D) mm Material Powder-coated steel Battery Space Fits 12V 7Ah SLA backup battery Warranty 3 Years (Australia) Downloads MW250 Datasheet Bosch Enclosure Quick Start Guide Bosch Enclosure User Manual Frequently Asked Questions Which Bosch panels fit the MW250?It is designed for the Bosch Solution 880, Solution 2000 (ICP-SOL2-P) and Solution 3000 (ICP-SOL3-P) control panel PCBs. Does the MW250 include the panel PCB?No. The MW250 is the enclosure only. The control panel board, keypad, plug pack and battery are purchased separately. Will a 7Ah battery fit inside?Yes. There is space for a standard 12V 7Ah sealed lead-acid backup battery alongside the PCB. Can I add a tamper switch?Yes. The cover accepts a standard Bosch cover/wall tamper micro-switch so the panel reports if the box is opened. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $40.99

• Save -$19.01

  Bosch Bosch IUI-SOL-TEXT — Solution 2000/3000 Alphanumeric LCD Codepad (White)

   

  Alphanumeric LCD · Plain-English · Solution 2000/3000 · Made in GermanyText CodepadIUI-SOL-TEXT Alphanumeric Codepad — Australian Stock & 3-Year Warranty The Bosch IUI-SOL-TEXT is the clarity-first user interface for the Bosch Solution 2000 and Solution 3000 alarm panels. Its backlit alphanumeric LCD shows full plain-English zone names and system events — so instead of decoding icons you simply read “Garage Door Open” or “Low Battery” at a glance. The text menu also makes programming and troubleshooting far easier for both installers and DIY users. Powered from the panel bus at 12 VDC over SDI2 and backed by a 3-year Australian warranty. Display Alphanumeric Zones Up to 16 Power 12 VDC Bus Warranty 3 Years AU Plain-English Display See zone names and system status as readable text rather than symbols, removing the guesswork during an alarm. Easier Programming The text-based menu makes installing, editing and troubleshooting the system significantly simpler. Readable Event History Scroll back through past alarms and events with clear time and date stamps. Adjustable to Suit You Customise backlight brightness and the volume of fire, panic and medical alarm tones. Technical Specifications Model / SKU IUI-SOL-TEXT Display Type Alphanumeric LCD (backlit) Max Zones Supported 16 Zones Compatibility Bosch Solution 2000 & 3000 Colour White (plastic) Operating Voltage 12 VDC (via SDI2 panel bus) Operating Temperature 0° to +45°C Warranty 3 Years (Australia) Downloads IUI-SOL-TEXT DatasheetBosch Codepad Quick Start GuideBosch Codepad User Manual Frequently Asked Questions Can I mix an icon keypad and this text keypad on the same system?Yes. You can run up to four keypads on a Solution 2000 or 3000, so a common setup is an IUI-SOL-TEXT at the front door and an IUI-SOL-ICON in the bedroom. Is the IUI-SOL-TEXT backlit?Yes. The display and keys are backlit for easy operation at night. Does it work with the Solution 6000?No. This codepad is for the Solution 2000 and 3000 only. The 6000 uses its own keypad range. How is it wired and powered?It connects over the SDI2 data bus and draws 12 VDC from the panel, so no separate power supply is needed. Why choose text over an icon keypad?Plain-English fault messages such as “Phone Line Fail” let you diagnose issues without consulting a manual to decode symbols. What is in the box?The IUI-SOL-TEXT codepad with wall-mount base, ready to wire to your Solution 2000 or 3000 panel. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $189.00 $169.99

• 

  Bosch Bosch CM751B — Solution 6000 IP Ethernet Communication Module

   

  Genuine Bosch · Solution 6000 IP Module · Remote AccessBosch CM751BCM751B Solution 6000 IP Ethernet Module — Australian Stock & 3-Year Warranty The Bosch CM751B is an IP Ethernet communication module that connects your Solution 6000 control panel to your network for app control, remote programming and secure IP alarm monitoring. It suits both the CC610PB dialler and CC615PB IP panels, replacing costly PSTN line dialling with LAN/WAN communication and 128-bit AES encryption. Installers gain full remote upload/download and the ability to operate outputs and areas over the internet, using Conettix and CSV-IP reporting formats. Backed by our 3-year Australian warranty and local tech support. Network 10/100 RJ45 Encryption 128-bit AES Reporting Conettix / CSV-IP Power From panel bus No Phone Line Costs Uses your existing IP network instead of PSTN dialling, cutting ongoing communication costs. Secure Communication 128-bit AES encryption protects alarm transmission and remote access to your Solution 6000. Remote Programming Configure, monitor and control the system over LAN, WAN or internet with remote upload/download. App-Ready Upgrade Adds mobile app connectivity so you can arm, disarm and check status from your phone. Technical Specifications Model / SKU Bosch CM751B Type IP Ethernet communication module Network RJ45 Ethernet (10/100 Base-T) Protocols TCP/IP, UDP, DHCP, SNMP, SMTP Encryption 128-bit AES Reporting Formats Conettix IP, CSV-IP Operating Temp 0°C to 55°C Power Supplied by panel Compatible Panels Solution 6000 (CC610PB, CC615PB) Warranty 3 Years (Australia) Downloads CM751B DatasheetBosch IP Module Quick Start GuideBosch IP Module User Manual Frequently Asked Questions Which panels is the CM751B for?It is designed for the Bosch Solution 6000 range, working with both the CC610PB dialler panel and the CC615PB IP panel. How does it connect to the network?Via a standard RJ45 Ethernet cable to your router or switch, using either DHCP (dynamic) or a static IP address. Can I program the panel remotely?Yes. The CM751B supports remote upload/download and lets you operate outputs and alarm areas over LAN, WAN or the internet. How is alarm data secured?Communication is protected with 128-bit AES encryption using Conettix IP or CSV-IP reporting formats. Does it need its own power supply?No. The module is powered directly from the Solution 6000 panel, connected to its expansion port. What's in the box?The CM751B module PCB. An Ethernet cable and enclosure are supplied separately. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $252.99

• Save -$98.01

  Bosch Bosch ICP-SOL3-P — Solution 3000 Control Panel PCB (16-Zone Hybrid Board)

   

  Solution 3000 · Control PCB · 16 Zone · Hybrid WirelessSolution 3000 PCBBosch ICP-SOL3-P Control Panel PCB — Australian Stock & 3-Year Warranty The Bosch ICP-SOL3-P is the genuine Solution 3000 control panel PCB, supplied board-only for system repairs or custom installer builds — no enclosure, power supply or sensors included. Purpose-built for larger Australian homes and small commercial premises, it offers 16 fully programmable zones (double the Solution 2000), 2 independent partitions and full Bosch RADION wireless integration. With up to 4 keypads, 32 user codes, multiple reporting formats and RSC+ app support via a B426-M IP module, it is a versatile hybrid board backed by a 3-year Australian warranty. Zones 16 Programmable Areas 2 Partitions Wireless Full RADION Type PCB Only Double the Capacity 16 fully programmable zones — twice the Solution 2000 — ideal for larger homes and small commercial sites. Hybrid RADION Wireless Full integration with Bosch RADION wireless PIRs, reeds and keyfobs for flexible retrofits. Smartphone & NBN Ready Pair with a B426-M IP module for RSC+ app control and high-speed IP reporting over your network. Board-Only Flexibility For repairs or custom builds — mount in a Bosch enclosure with your own PSU and battery. Technical Specifications Model / SKU ICP-SOL3-P Series Bosch Solution 3000 Zones 16 fully programmable (wired or wireless) Areas 2 independent partitions Users / Codes 1 installer + up to 32 users Keypads Up to 4 (Icon, Alphanumeric, Touchscreen) Wireless Full Bosch RADION integration Reporting CID, SIA, Email, Domestic Dialing, CSV-IP, Push Power 18 VAC at 1.3 A; 12 VDC 6.5 Ah backup battery Operating Temperature 0°C to +45°C Supplied As PCB only (no enclosure/PSU/sensors) Warranty 3 Years (Australia) Downloads ICP-SOL3-P DatasheetBosch Alarm Panel Quick Start GuideBosch Alarm Panel User Manual Frequently Asked Questions Is this the board only?Yes. The ICP-SOL3-P is the PCB only — designed for repairs or custom builds, without an enclosure, power supply or sensors. Is it NBN ready?Yes. Paired with a B426-M IP module the system reports over your internet connection with app control, bypassing old phone lines. Can I use wireless sensors?Yes. Unlike the Solution 2000, the 3000 fully supports the Bosch RADION range of wireless transmitters for a hybrid setup. Which keypads work with it?All Solution 2000/3000 codepads — up to 4 Icon, Alphanumeric or Touchscreen keypads. What power does it need?18 VAC at 1.3 A from a Bosch plug-pack, with a 12 V 6.5 Ah backup battery for mains-fail operation. Building a new system — what should I buy?Choose a complete Solution 3000 kit with enclosure, battery, siren and PIR sensors for a fresh install. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $275.00 $176.99

• Save -$50.00

  Bosch Bosch Solution 6000 Alarm Kit — Wi-Fi Keypad, 3 PIRs, Battery & Sirens

   

  Bosch Solution 6000 · Wired · Wi-Fi Colour Keypad · 3 PIRs · Choice of PCB Bosch Sol 6000 Kit Solution 6000 Alarm Kit (3 PIR) — Australian Stock & 3-Year Warranty A professional Bosch Solution 6000 wired alarm kit for homes, offices and light-commercial sites. Choose your panel PCB version — Standard PCB (dialler) for traditional reporting flexibility, or Wi-Fi PCB (non-dialler) for modern installs without a phone line — and your preferred external siren. The kit includes the CP737B 3.5" Wi-Fi colour keypad with smart-card reader, three Blue Line Gen2 (ISC-BPR2-W12) PIRs, a 12V 7Ah backup battery, the TF008-B plug pack, external siren/strobe plus two internal piezo sounders, and an MW350 metal enclosure. Add a B426-M IP module for Bosch RSC+ app control with either PCB. Backed by a 3-year Australian warranty. PCB Choice Standard / Wi-Fi Keypad CP737B Wi-Fi Detectors 3x Blue Line Sirens Ext + 2 Internal Choose Your PCB Standard dialler PCB for broad reporting flexibility, or Wi-Fi non-dialler PCB for phone-line-free installs. Wi-Fi Colour Keypad The CP737B brings a 3.5" colour display and MiFare smart-card reader for fast tap-to-arm control. Installer Favourite The Solution 6000 is a proven, expandable platform Australian installers know and trust. Complete Package Panel, keypad, three PIRs, battery, plug pack, external and internal sirens and metal enclosure included. What's Included 1 x Solution 6000 Panel PCB CC615PB / CC610PB — Standard (dialler) or Wi-Fi (non-dialler) per selected option 1 x Wi-Fi Colour Keypad Bosch CP737B (3.5" + smart-card reader) 3 x Blue Line Gen2 PIRs Bosch ISC-BPR2-W12 1 x Power & Backup TF008-B plug pack + 12V 7Ah battery 1 x External Siren WP06 siren/strobe or SC03/CO/T siren/strobe kit (per selected option) 2 x Internal Sounders Top-hat piezo + flush-mount piezo 1 x Metal Enclosure Bosch MW350 back box Technical Specifications Kit / SKU GC-BOS6000-KIT-3PIR-06 Series Bosch Solution 6000 Panel Options Standard PCB (dialler) / Wi-Fi PCB (non-dialler) Siren Options WP06 / SC03/CO/T external siren Keypad CP737B 3.5" Wi-Fi colour with smart-card reader Detectors Supplied 3 x Blue Line Gen2 PIR (ISC-BPR2-W12) Power 18VAC 1.33A plug pack + 12V 7Ah battery App Support Bosch RSC+ (requires optional B426-M IP module; works with both PCBs) Warranty 3 Years (Australia) Downloads Bosch Solution 6000 Datasheet Bosch Alarm Kit Quick Start Guide Bosch Alarm Kit User Manual Frequently Asked Questions What is the difference between the Standard and Wi-Fi PCB?The Standard PCB is the dialler version for broader communication/reporting options; the Wi-Fi PCB is the non-dialler version for modern installs without a phone line. Both share the same kit components. Does the Wi-Fi keypad give me the phone app?No — smartphone app control (Bosch RSC+) requires the optional B426-M IP communication module. It works with both PCB versions. Which external siren should I pick?The WP06 is a robust high-visibility outdoor siren/strobe; the SC03/CO/T is a slimline Bosch-style siren/strobe cover kit — choose the look that suits the install. How many sounders are included?Three — an external siren/strobe plus two internal piezos (a top-hat and a flush-mount piezo). Is it suitable for a business?Yes. The Solution 6000 is widely used for offices, retail and small commercial sites as well as homes, and expands to 144 zones. Is professional installation required?Yes. Australian alarm systems should be installed by a licensed security technician for correct programming and insurance compliance. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $949.00 - $999.00

• Save -$40.00

  Bosch Bosch Alarm External Siren Kit (KIT3) — Flush Mount, Blue Strobe & Backup Battery

   

  Bosch Alarm · Flush-Mount Siren · Blue Strobe · Backup Battery · KIT3 Bosch Siren Kit KIT3 External Siren Kit (KIT3) — Australian Stock & 3-Year Warranty The Bosch KIT3 flush-mount siren kit is the premium external warning solution for Bosch Solution 2000 and Solution 3000 alarm systems. Its recessed flush-mount siren sits neatly into the wall or eave for a clean, tamper-resistant, architectural finish, while the signature blue strobe gives immediate visual identification of an alarm event. The kit combines a 110dB+ external siren, an internal "top-hat" piezo screamer, a 12V 7Ah backup battery and a housing tamper switch. Built from UV-stabilised polycarbonate for harsh Australian weather. Backed by a 3-year Australian warranty. Siren Output 110dB+ Strobe Blue Mounting Flush / Recessed Backup 12V 7Ah Flush-Mount Design The recessed siren sits flat against the structure for a low-profile, tamper-resistant, architectural finish. High-Visibility Strobe The blue strobe delivers instant visual warning of an alarm event, day or night, as a strong deterrent. Weather Resistant UV-stabilised polycarbonate stands up to harsh Australian sun and rain for years of reliable service. Complete Warning Kit External siren, internal piezo, 7Ah backup battery and tamper switch — a full audible/visual warning package. What's Included 1 x External Flush-Mount Siren With blue strobe (Bosch 5026) 1 x Internal Piezo Screamer "Top-hat" internal sounder (SOUN008) 1 x Backup Battery 12V 7Ah sealed lead-acid (BAT2000) 1 x Tamper Switch Alarm housing tamper (Bosch 5060) Technical Specifications Kit / SKU SIREN-SURFACE-KIT-3 (KIT3) Mounting Type Flush / recessed mount Operating Voltage 12V DC Siren Output 110dB+ at 1 metre Strobe Colour Blue Backup Battery 12V 7.0Ah sealed lead-acid Suits Bosch Solution 2000 / 3000 (and other 12V hardwired panels) Warranty 3 Years (Australia) Downloads Siren Kit Datasheet Bosch Siren Kit Quick Start Guide Bosch Siren Kit User Manual Frequently Asked Questions What is the difference between KIT2 and KIT3?KIT2 uses a surface-mount siren that sits on top of the wall; KIT3 uses a flush-mount siren recessed into the wall or eave for a flatter, cleaner profile. Does it fit a standard wall cavity?Yes. It is designed to fit standard Australian wall cavities or eaves for a professional, architectural finish. Which panels does it suit?It is ideal for Bosch Solution 2000/3000 and works with virtually any hardwired 12V alarm panel. Is a backup battery included?Yes — a 12V 7Ah sealed lead-acid battery is supplied to power the system during a mains outage. Does it have tamper protection?Yes. A housing tamper switch triggers the alarm if the cover is removed. What colour is the strobe?Blue — the signature high-visibility Bosch strobe for clear alarm identification. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $129.00 $89.00

• 

  Bosch Bosch B915 — G-Series Hardwired Alphanumeric LCD Keypad

   

  Alphanumeric LCD · Backlit · G-Series · Made in GermanyG-Series KeypadB915 G-Series Alphanumeric LCD Keypad — Australian Stock & 3-Year Warranty The Bosch B915 is a hardwired alphanumeric LCD keypad for the Bosch G-Series control panels such as the B9512G. Its backlit alphanumeric display keeps system status and messages clear day or night, and it connects over the SDI2 data bus for reliable communication with the panel. Finished in black/white with a durable plastic wall-mount housing and powered at 12 VDC, it is a dependable everyday interface for commercial G-Series installs. Backed by a 3-year Australian warranty. Display Alphanumeric Bus SDI2 Power 12 VDC Warranty 3 Years AU Alphanumeric Display A backlit LCD shows clear system messages and status for easy operation. SDI2 Connectivity Connects over the Bosch SDI2 data bus for reliable panel communication. Durable Housing A robust plastic wall-mount design suits everyday residential and commercial use. G-Series Ready Purpose-built for Bosch G-Series panels such as the B9512G. Technical Specifications Model / SKU B915 (BOSB915) Display Alphanumeric LCD (backlit) Series Bosch G-Series (e.g. B9512G) Bus SDI2 Colour Black / white Material Plastic Mounting Wall mount Weight 300 g Power 12 VDC Warranty 3 Years (Australia) Downloads B915 DatasheetBosch Keypad Quick Start GuideBosch Keypad User Manual Frequently Asked Questions Which panels does the B915 work with?The B915 is a G-Series keypad designed for Bosch G-Series panels such as the B9512G. How does it connect to the panel?It communicates over the Bosch SDI2 data bus. What power does it need?It runs on 12 VDC supplied from the panel. Is the display backlit?Yes. The alphanumeric LCD is backlit for clear reading in low light. How is it mounted?It is a plastic wall-mount keypad and weighs around 300 g. How does it compare to the B920 and B930?The B915 is a compact alphanumeric keypad; the B920 adds a 2-line display and the B930 steps up to a 5-line ATM-style display with four inputs. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $289.00

• 

  Bosch Bosch PR113B — Solution 6000 Standard Proximity Smartcard Reader (Black)

   

  Solution 6000 · Prox/Smartcard · Standard · BlackProx ReaderPR113B Proximity Smartcard Reader — Australian Stock & 3-Year Warranty The Bosch PR113B is a standard-size RS485 proximity/smartcard reader built for Bosch Solution 6000 access control. It lets users arm and disarm the system and control doors simply by tapping a compatible card or key fob, streamlining everyday entry and management. Housed in a durable black plastic wall-mount enclosure, it provides one input and one powered output and runs on multi-voltage 10–14VDC power over the RS485 bus. A reliable, low-fuss reader for homes and businesses, backed by a full 3-year Australian warranty. Reads Prox/Smartcard Bus RS485 Power 10–14 VDC I/O 1 In / 1 Out Tap-to-Arm Convenience Arm, disarm and control doors with a single tap of a card or fob — no codes to remember on the Solution 6000. Smartcard & Prox Support Reads both proximity and smartcard credentials, so you can issue cards and fobs to suit your site. RS485 Bus Wiring Connects to the Solution 6000 panel over the RS485 bus for simple, reliable data and power distribution. Standard Wall-Mount Standard-size black housing mounts neatly on the wall at any entry point around the premises. Technical Specifications Model / SKU Bosch PR113B (BOSPR113B) Type Proximity / smartcard reader Series Solution 6000 Format Standard size Colour Black I/O 1 input, 1 powered output Material Plastic Mounting Wall mount Power Multi-voltage, 10–14 VDC (12 VDC) Bus RS485 Warranty 3 Years (Australia) Downloads PR113B DatasheetBosch Proximity Reader Quick Start GuideBosch Proximity Reader User Manual Frequently Asked Questions Which panel does the PR113B work with?The PR113B is designed for the Bosch Solution 6000 access control system, connecting to the panel as a card reader for arming, disarming and door control. What cards and fobs does it read?It reads both proximity and smartcard credentials, so you can use compatible Bosch cards or key fobs to identify users at the reader. How does it wire to the system?The reader connects to the Solution 6000 panel over the RS485 bus, which carries both data and power for straightforward cabling. How is it different from the slim or mullion readers?The PR113B is a standard-size reader. The PR115B is a slim reader and the PR116B is a white variant — choose the format and colour that best suit your mounting location. How is the PR113B powered?It runs on multi-voltage power, accepting 10–14 VDC (nominally 12 VDC) supplied over the RS485 bus connection. Where can it be mounted?The PR113B is a wall-mount reader in a black plastic housing, ideal for fitting beside doors and entry points around your home or business. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $199.00

• 

  Bosch Bosch PR116B — Solution 6000 Slim/Mullion Prox Smartcard Reader (White, IP66)

   

  Solution 6000 · Slim/Mullion · IP66 · WhiteProx ReaderPR116B Slim/Mullion Prox Reader — Australian Stock & 3-Year Warranty The Bosch PR116B is a slim/mullion-profile RS485 proximity and smartcard reader built for Solution 6000 access control. Its narrow footprint is ideal for tight door frames and mullions where a full-size reader simply won't fit. The IP66-rated white plastic housing is sealed against dust and heavy rain, making it well suited to outdoor and exposed entries. One supervised input and one powered output handle door and lock control, and the reader runs on multi-voltage 10–14VDC. Backed by a 3-year Australian warranty. Reads Prox/Smartcard Rating IP66 Form Slim/Mullion Bus RS485 Fits Narrow Frames The slim/mullion profile mounts on tight door frames and posts where standard readers are too wide. IP66 Weatherproof Sealed white housing resists dust and powerful water jets for reliable outdoor and exposed-entry use. Smartcard & Prox Support Reads both proximity credentials and smartcards, giving you flexible options for your access system. RS485 Bus Wiring Connects to Solution 6000 access control over a robust RS485 bus for long, stable cable runs. Technical Specifications Model / SKU Bosch PR116B (BOSPR116B) Type Proximity / smartcard reader Series Solution 6000 Format Slim / mullion Colour White IP Rating IP66 I/O 1 input, 1 powered output Material Plastic Mounting Wall mount Power Multi-voltage, 10–14 VDC (12 VDC) Bus RS485 Warranty 3 Years (Australia) Downloads PR116B DatasheetBosch Proximity Reader Quick Start GuideBosch Proximity Reader User Manual Frequently Asked Questions Which panel does the PR116B work with?The PR116B is designed for the Bosch Solution 6000 access control system, connecting over the RS485 bus. Is it weatherproof for outdoor use?Yes. The PR116B is IP66 rated, so its sealed white housing withstands dust and heavy rain, making it suitable for outdoor and exposed entries. What does slim/mullion mean?It refers to the reader's narrow profile, sized to fit tight door frames, mullions and posts where a wider reader won't mount cleanly. What cards does it read?The PR116B reads both proximity credentials and smartcards, giving you flexibility in the credentials you issue. How is it wired?It connects to the Solution 6000 over an RS485 bus and runs on multi-voltage 10–14VDC power, supporting long, stable cable runs. How does it differ from the standard PR113B?The PR116B shares the same reading technology but comes in a slim/mullion form factor for narrow mounting locations, whereas the PR113B uses a standard-width housing. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $189.00

• 

  Bosch Bosch CM797B — LAN & Power Isolator Module (Sol 16i/144/E Series)

   

  Sol 16i/144/E Series · LAN & Power Isolator · 250mABus IsolatorCM797B LAN & Power Isolator — Australian Stock & 3-Year Warranty The Bosch CM797B isolates and protects the LAN data bus and power on Bosch Solution 16i, 144 and E Series systems. By separating downstream devices from the main panel, it helps extend bus runs and shields the control panel from wiring faults, short circuits and interference on connected peripherals. The module is built on a compact blue PCB designed to sit neatly inside your enclosure, drawing 10–14 VDC at 250 mA. It keeps your hardwired data bus stable and reliable across larger installations. Backed by a 3-year Australian warranty. Function LAN & Power Isolation Current 250 mA Power 10–14 VDC Fits Sol 16i/144/E Protect the Data Bus Isolates the LAN data bus so faults on downstream devices don't disrupt the main control panel. Extend Bus Runs Regenerates and isolates bus signals to help you run longer, more reliable cable distances. Fault Isolation Shields the panel from short circuits, wiring faults and interference on connected peripherals. Compact Enclosure Fit Small blue PCB that mounts cleanly inside your alarm panel enclosure to save space. Technical Specifications Model / SKU Bosch CM797B (BOSCM797B) Type LAN & power isolator module Function Isolates LAN data bus & power Current 250 mA Compatibility Solution 16i / 144 / E Series Colour Blue PCB Mounting Enclosure mount Power 10–14 VDC Weight 100 g Warranty 3 Years (Australia) Downloads CM797B DatasheetBosch Isolator Module Quick Start GuideBosch Isolator Module User Manual Frequently Asked Questions What does the Bosch CM797B do?It is a LAN and power isolator module that separates and protects the data bus and power supply between the Bosch control panel and downstream devices, keeping the system stable if a fault occurs on a connected peripheral. Which panels is it compatible with?The CM797B is designed for Bosch Solution 16i, Solution 144 and E Series alarm systems. When should I use a bus isolator?Use it when you have long bus cable runs, many devices on the LAN bus, or want to protect the panel from wiring faults, short circuits and electrical interference on downstream devices. Does it extend the bus distance?Yes. By isolating and regenerating the bus signal it helps you run longer, more reliable cable distances than a single unisolated bus segment. How is the module powered?It draws power from the system bus at 10–14 VDC, using approximately 250 mA of current. Where does it mount?The compact blue PCB is designed to mount inside your alarm panel enclosure for a tidy, protected installation. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $189.00

• 

  Bosch Bosch CM444B — 2A Relay Interface Module (Sol 6000/144 Door Lock)

   

  Sol 6000/144 · 2A Relay · Bus-Powered · Door Lock Relay Module CM444B 2A Relay Interface Module — Australian Stock & 3-Year Warranty The Bosch CM444B is a bus-powered 2A relay interface that connects to the panel LAN+ and lock outputs to switch standard electric door locks on a Solution 6000/144 access-control system. With a single relay output, a compact blue PCB and simple enclosure mounting, it lets your panel drive a door strike or magnetic lock without a separate power supply — drawing everything it needs straight from the bus. A neat, reliable way to add door-lock control to your Bosch alarm and access system, backed by a 3-year Australian warranty. Relay 2A Output Outputs 1 Power Bus-Powered Fits Sol 6000/144 Switch Door Locks Connects to the panel LAN+ and lock outputs to switch standard electric door strikes and magnetic locks on your Solution 6000/144 system. Bus-Powered Simplicity Draws power directly from the Bosch bus — no separate PSU to wire in, keeping installation fast and the enclosure tidy. 2A Relay Capacity A single 2A relay output gives you ample headroom to drive common door-lock hardware reliably. Compact Enclosure Fit Small blue PCB mounts neatly inside the panel enclosure, adding lock control without taking up space. Technical Specifications Model / SKU Bosch CM444B (BOSCM444B) Type 2A relay interface module Output 1 x relay, 2 A Application Standard electric door locks (LAN+ & lock outputs) Compatibility Solution 6000 / 144 Colour Blue PCB Mounting Enclosure mount Power Bus-powered Weight 100 g Warranty 3 Years (Australia) Downloads CM444B DatasheetBosch Relay Module Quick Start GuideBosch Relay Module User Manual Frequently Asked Questions What does the Bosch CM444B do?It is a 2A relay interface module that lets a Bosch panel switch a standard electric door lock. It connects to the panel LAN+ and lock outputs and drives the lock hardware on your behalf. Which panels is it compatible with?The CM444B is designed for the Bosch Solution 6000 / 144 access-control system. What locks can it switch?It switches standard electric door locks such as door strikes and magnetic locks, connected via the LAN+ and lock outputs. How is the module powered?It is bus-powered — it draws power directly from the Bosch bus, so you do not need a separate power supply for the module itself. What does the 2A rating mean?The relay is rated to switch up to 2 amps, giving you enough current capacity to drive typical door-lock hardware reliably. Where does it mount?The compact blue PCB is designed for enclosure mounting inside the panel housing. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $10.00

• 

  Bosch Bosch CM439B — USB Desktop Smartcard Reader (Register Fobs, Solution 6000)

   

  USB Desktop Reader · Card Enrolment · Solution 6000 · Made in GermanyUSB ReaderCM439B USB Desktop Smartcard Reader — Australian Stock & 3-Year Warranty The Bosch CM439B is a USB desktop smartcard reader used to register cards and fobs into the Bosch Solution 6000 (and 144-zone) system. Plugging straight into a PC via USB, it works with Solution Link and Site Manager software so installers can quickly enrol smartcards without touching a wall keypad. Its compact black desktop housing is USB-powered, so no external supply is needed. Note: it registers smartcards only. Backed by a 3-year Australian warranty. Connection USB to PC Use Card Enrolment Power USB (5V) Warranty 3 Years AU Fast Card Enrolment Register Solution 6000 smartcards straight from your PC instead of a wall keypad. Plug-and-Play USB Connects to any PC over USB and is USB-powered, so no external supply is required. Software Integration Works with Bosch Solution Link and Site Manager programming tools. Compact Desktop Design A small black desktop reader that sits neatly beside the installer’s laptop. Technical Specifications Model / SKU CM439B (BOSCM439B) Device Type USB desktop smartcard reader Suits Solution 6000 / 144 Function Register smartcards / fobs (smartcards only) Connection USB to PC Power USB powered (5V) Colour / Material Black / plastic Mounting Desktop Warranty 3 Years (Australia) Downloads CM439B DatasheetBosch USB Reader Quick Start GuideBosch USB Reader User Guide Frequently Asked Questions What is the CM439B used for?It registers smartcards into the Bosch Solution 6000 (and 144-zone) system directly from a PC. Which software does it work with?It works with Bosch Solution Link and Site Manager programming software. Does it need external power?No. It is USB-powered (5V) directly from the PC. Can it register any token?It registers smartcards only. Do I need this to add cards?It is the quickest way to bulk-enrol cards; it saves presenting each card at a wall-mounted prox keypad. Which keypads use these cards?Cards enrolled with the CM439B work with Solution 6000 prox keypads such as the CP155B and CP156B. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $189.00

• 

  Bosch Bosch CC500P — Solution 16i Hardwired Alarm Panel PCB (8/16 Zone, 4 Areas)

   

  Solution 16i · Hardwired · 16 Zone · 4 AreasSolution 16i PanelBosch CC500P Solution 16i Panel — Australian Stock & 3-Year Warranty The Bosch CC500P (Solution 16i) is a hardwired control panel PCB for Australian homes and small commercial premises that need more partitioning than the Solution 2000/3000. It provides 8 to 16 fully programmable zones, up to 4 independent areas, 4 outputs (expandable), 32 users and support for up to 8 keypads. With a built-in PSTN dialler, 256-event log and enclosure-mount design, the CC500P is a robust multi-area panel backed by a 3-year Australian warranty. Zones 8 / 16 Split Areas 4 Partitions Keypads Up to 8 Users 32 Codes Four Independent Areas Partition the site into up to 4 areas — ideal for shared premises, tenancies or home-plus-office. Eight Keypads Place a codepad at every entry with support for up to 8 keypads across the system. Expandable Outputs Four onboard outputs expandable via zone expanders for sirens, strobes and automation. Built-in Dialler Onboard PSTN reporting with IP paths available for monitored Australian installations. Technical Specifications Model / SKU CC500P (BOSCC500P) Series Bosch Solution 16i Zones 8 / 16 split, fully programmable Areas Up to 4 independent partitions Outputs 4 (expandable) Users 32 users Keypads Up to 8 Event Log 256 events Communications Built-in PSTN dialler Mounting Enclosure mount (PCB) Power 18 VAC Weight 2.8 kg Warranty 3 Years (Australia) Downloads CC500P DatasheetBosch Alarm Panel Quick Start GuideBosch Alarm Panel User Manual Frequently Asked Questions How is the Solution 16i different from the 2000/3000?The 16i (CC500P) adds up to 4 areas and 8 keypads, suiting multi-tenancy or home-plus-office sites needing more partitioning. Which keypads are compatible?Bosch Solution-series codepads such as the CP-series LCD keypads; check the current 16i compatibility matrix for your model. Is an enclosure included?No. This is the PCB — mount it in a compatible Bosch metal enclosure with a plug-pack and backup battery. Can it report over IP?Yes. It includes a PSTN dialler, and IP reporting can be added with a compatible communication module. How many zones can it handle?8 to 16 fully programmable hardwired zones across up to 4 areas. What power does it need?18 VAC via a Bosch plug-pack, with a 12 V backup battery for mains-fail operation. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $159.00

• 

  Bosch Bosch HCR-BU2 — Standalone 433MHz Receiver, Dual SPDT Relay in Enclosure (Blue)

   

  433MHz · 2x SPDT Relay · Enclosed · Multi-Voltage433MHz ReceiverHCR-BU2 Standalone Receiver — Australian Stock & 3-Year Warranty The Bosch HCR-BU2 is a standalone 433MHz wireless receiver supplied in its own plastic enclosure, with two independent SPDT relay outputs for switching gates, doors, lighting or auxiliary circuits. It accepts a 12/24V AC or DC multi-voltage supply and suits DSRF-style wireless remote applications where a neatly enclosed, ready-to-mount receiver is preferred. A robust, install-anywhere switching receiver backed by a 3-year Australian warranty. Frequency 433 MHz Outputs 2x SPDT Relay Power 12/24V AC/DC Housing Enclosure Mount Two Relay Outputs Dual independent SPDT relays allow one receiver to switch two separate circuits or devices. Enclosed & Ready Supplied in its own plastic enclosure for a clean, protected, ready-to-mount installation. Multi-Voltage Input Runs from 12V or 24V AC/DC, matching a wide range of existing power supplies. Wireless Switching Receives 433MHz signals to trigger gates, doors and lighting without running control cable. Technical Specifications Model / SKU Bosch HCR-BU2 (BOSHCR-BU2) Device Type Standalone wireless receiver Frequency 433 MHz Outputs 2x SPDT relay outputs Power Input 12/24V AC/DC (multi-voltage) Colour Blue Material Plastic Mounting Enclosure mount Application DSRF-style wireless switching Warranty 3 Years (Australia) Downloads HCR-BU2 DatasheetBosch Receiver Quick Start GuideBosch Receiver User Manual Frequently Asked Questions What is the HCR-BU2 used for?It is a standalone 433MHz receiver that switches two SPDT relay outputs from wireless transmitters, for controlling gates, doors, lighting or other circuits. Does it come with an enclosure?Yes. The HCR-BU2 is supplied in its own plastic enclosure ready to mount. What power does it need?It accepts a 12V or 24V AC/DC multi-voltage supply. How many outputs does it have?Two independent SPDT relay outputs. Does it require an alarm panel?No. It operates as a standalone receiver without a control panel. What frequency does it receive?433MHz, matching Bosch and compatible 433MHz wireless transmitters. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $129.00

• 

  Bosch Bosch ISC-PDL1-WA18G — Pro Series Anti-Mask Pet-Friendly TriTech+ PIR Motion Sensor (18m)

   

  Pro Series · Anti-Mask · TriTech+ MW+PIR · Pet-Friendly Anti-Mask TriTech+ ISC-PDL1-WA18G Pro Series Anti-Mask TriTech+ PIR — Australian Stock & 3-Year Warranty The Bosch ISC-PDL1-WA18G is a hardwired Pro Series TriTech+ motion detector that pairs microwave (10.525 GHz) and PIR sensing with Tri-focus optics and, crucially, active infrared anti-mask detection. The anti-mask feature detects any attempt to obscure, spray or block the detector, making it ideal for higher-security and commercial applications where tampering is a risk. Dual-technology verification and reliable pet immunity up to 4.5 kg keep false alarms to a minimum, with field-selectable coverage of 18 x 25 m or 8 x 10 m. Perfect for Bosch Solution 2000, 3000 and 6000 systems, backed by a 3-year Australian warranty. Security Anti-Mask Technology MW + PIR Pet Immunity Up to 4.5kg Coverage 18 x 25m Active Anti-Mask Infrared anti-mask technology detects any attempt to spray, cover or block the detector, providing an extra layer of protection against deliberate tampering. Dual-Tech Verification Microwave (10.525 GHz) and PIR sensing must both agree before an alarm is raised, dramatically reducing false alarms. True Pet Immunity Reliably ignores pets up to 4.5 kg so cats and small dogs can move freely without triggering the alarm. Selectable Coverage Choose a wide 18 x 25 m pattern or a focused 8 x 10 m short range to match the protected space. Technical Specifications Model / SKU Bosch ISC-PDL1-WA18G Series Pro Series Sensor Type TriTech+ (Microwave + PIR) with Anti-Mask, Tri-Focus optics Anti-Mask Active infrared anti-mask detection Microwave Frequency 10.525 GHz Pet Immunity Up to 4.5 kg Coverage 18 x 25 m, or 8 x 10 m field selectable Outputs 1x N/C alarm output (dry), tamper N/C Power Supply 9-15 VDC Mount Height 2 m - 3 m Housing Plastic, wall mount Ingress / Impact IP41 / IK04 Warranty 3 Years (Australia) Downloads ISC-PDL1-WA18G Datasheet Bosch PIR Sensor Quick Start Guide Bosch PIR Sensor User Manual Frequently Asked Questions What does anti-mask do?Active infrared anti-mask detection senses any attempt to spray, cover or block the detector's lens and signals a trouble/tamper condition, protecting against deliberate sabotage. How does it differ from the ISC-PDL1-W18G?Both are TriTech (MW+PIR) pet-friendly detectors. The WA18G adds active anti-mask detection, making it the better choice for higher-security or commercial sites. Will it ignore my pets?Yes. It offers reliable pet immunity for animals up to 4.5 kg, so cats and small dogs won't cause false alarms while intruders are still detected. How is it wired and powered?It is hardwired and runs on 9-15 VDC, providing one N/C dry alarm output plus an N/C tamper contact for connection to your panel's zone inputs. Which alarm panels is it compatible with?It works with any conventional hardwired panel and pairs perfectly with Bosch Solution 2000, 3000 and 6000 control panels. What height should it be mounted at, and what area does it cover?Mount it on a wall 2 m to 3 m high. Coverage is field-selectable between a wide 18 x 25 m pattern and a focused 8 x 10 m short range. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $249.00

• 

  Bosch Bosch DS160 — Classic Series Request-to-Exit PIR with Timer & Sounder (Grey)

   

  Classic Series · Request-to-Exit · Timer + Sounder REX PIR + Sounder Bosch DS160 Request-to-Exit PIR — Australian Stock & 3-Year Warranty The Bosch DS160 (BOSDS160) is a Classic Series request-to-exit (REX) PIR with a built-in sounder for access-controlled doors. Mounted above a doorway, it detects a person leaving and momentarily releases the electric lock — no card or button required — while the integrated sounder provides an audible exit or door-ajar warning. With an adjustable timer, dual SPDT relays and selectable fail-safe / fail-secure modes, it handles single or double-door installs. Wrap-around coverage and internal vertical pointability make aiming easy. Backed by a 3-year Australian warranty. Function REX + Sounder Timer Adjustable Output 2x SPDT Power 12–30V AC/DC Touchless Exit Automatically releases the door when someone approaches to leave — no card, code or push button. Built-in Sounder The integrated sounder gives an audible exit or door-held-open warning for added control. Adjustable Timer & Relays Set the relay hold time and choose fail-safe or fail-secure to suit your lock hardware. Single or Double Doors Wrap-around coverage and vertical pointability suit one or two doors from a wide mounting range. Technical Specifications Model / SKU Bosch DS160 (BOSDS160) Series Classic Series Function Request-to-Exit (REX) PIR with sounder Detection Pattern 2.4 x 3 m Alarm Output 2x SPDT relay Timer Adjustable relay hold time Sounder Built-in Mounting Wall Installation Height 0.75 – 4.6 m Operating Voltage 12 – 30 V AC/DC Colour Grey Warranty 3 Years (Australia) Downloads DS160 Datasheet Bosch Request-to-Exit PIR Quick Start Guide Bosch Request-to-Exit PIR User Manual Frequently Asked Questions What is the difference between the DS160 and DS150i?Both are request-to-exit PIRs with an adjustable timer; the DS160 adds a built-in sounder and a wider 12–30 V supply, while the DS150i is timer-only. What is the sounder used for?It provides an audible exit tone or a door-held-open / ajar warning, useful for controlled entry points. What lock types does it support?Dual SPDT relays with selectable fail-safe / fail-secure modes suit mag locks, strikes and most electric door hardware. Is it wired or wireless?Hardwired, powered by 12–30 V AC or DC. Where should it be mounted?Above the doorway on the wall, between 0.75 m and 4.6 m, aimed at the exit approach. Can I use it on double doors?Yes — the wrap-around coverage pattern and dual relays suit single or double-door installations. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $165.00

Show more products