Dahua 4-Port PoE Switch (Unmanaged) DH-PFS3106-4ET-60-V2 Dahua 4 Port POE Switch (unmanaged) Eight-Pin assignment PoE power supply Intelligent PoE Hi-PoE 60W (Orange Port) PoE watchdog 250 m long distance PoE transmission Wide operating temperature: -30C to +65C (-22F to +149F) Specifications POE SWITCH ETHERNET PORT 4 OPTICAL PORT 1 UPLINK PORT 1 POE BUDGET Port 1<=60 W (Hi-PoE), port 2-4<=30 W, total<=60 W LAYER Layer 2 TYPE Unmanaged Downloads Datasheet of DH-PFS3106-4ET-60 user manual

Read more less

Dahua 10-Port Unmanaged Desktop Switch with 8 Port PoE DH-PFS3110-8ET-96-V2 The Dahua 10-Port Unmanaged Desktop Switch with 8 Port PoE allows for long distance transmission of power and data, while the intelligent PoE ensures efficient power supply to connected devices. With a wide operating temperature range and PoE watchdog, this switch is a reliable and adaptable solution for powering your devices. Features Eight-PIN Assignment PoE Power Supply Intelligent PoE Red port supports 90W IEEE802.3bt PoE watchdog 250 m long distance PoE transmission Wide operating temperature: -30C to +65C (-22F to +149F) Specifications ETHERNET PORT 8 OPTICAL PORT 1 UPLINK PORT 1 POE BUDGET Port1<=60W, Port2-8<=30W, Total<=96W LAYER Layer 2 TYPE Unmanaged Downloads Datasheet of DH-PFS3110-8ET-96User Manual

Read more less

Uniarch switch, 10 x 100Mbps network ports, including 8 PoE/PoE+ ports, 2 x 100Mbps uplink ports, Max capacity for single port 30W, total capacity 120W, up to 250m transmission distance, all-metal housing Multiple working modes to address your business needs: Normal, Secure and Surveillance Support port traffic control Support for secure mode, all downlink ports can communicate only with uplink ports Up to 250m transmission distance on surveillance mode Support buffer optimization All-metal housing, safe and reliable Specifications POE SWITCH Ethernet Port 10 (8 x PoE Port) Optical Port 0 UpLink Port 2 PoE Budget Max capacity: 120W. Max capacity for single port: 30W Layer Layer 2 Type Unmanaged Downloads SW-2110-P Switch Datasheet-V1.01PoE Switch Quick Guide-V1.018FE(PoE)+2FE PoE Switch User Guide

Read more less

TP-Link TL-SG1016D 16-Port Gigabit Unmanaged Switch A straightforward Gigabit upgrade for growing networks. The TP-Link TL-SG1016D delivers 16 ports of 10/100/1000Mbps connectivity with 32Gbps of switching capacity — all in a compact, fanless chassis that sits on a desktop or mounts in a standard 19-inch rack. With plug-and-play simplicity and energy-efficient Green Technology, it's a reliable, low-maintenance choice for offices, small businesses, and network infrastructure upgrades. Key Features 16 × 10/100/1000Mbps Auto-Negotiation RJ45 ports for full Gigabit connectivity 32Gbps switching capacity with a 23.8Mpps packet forwarding rate Auto MDI/MDIX on all ports — no crossover cables required MAC address self-learning with an 8K MAC address table IEEE 802.3x flow control for reliable data transfer Energy-efficient Green Technology — saves up to 15% power consumption Up to 80% of packaging material is recyclable — an eco-conscious choice Fanless design — silent operation suitable for office environments Plug and play — no software, no configuration, no login required Desktop and 19-inch rackmount form factor for flexible deployment Use Cases Upgrading legacy 10/100 networks to full Gigabit speeds Expanding wired connectivity in small to medium offices IP camera and NVR network infrastructure where management features are not required Server room or comms cabinet deployments needing a compact, high-port-count switch Retail, hospitality, and education environments requiring quiet, reliable switching Specifications Specification Detail Model TL-SG1016D Ports 16 × 10/100/1000Mbps RJ45 Switching Capacity 32 Gbps Packet Forwarding Rate 23.8 Mpps MAC Address Table 8K Auto-Negotiation / MDI/MDIX Yes (all ports) Flow Control IEEE 802.3x Energy Saving Up to 15% power reduction (Green Technology) Fan Fanless (silent) Mounting Desktop / Rackmount (19-inch) Weight 1.84 kg SKU TL-SG1016D Vendor TP-Link Recommended Accessories TP-Link TL-SG1016DE Easy Smart Switch — upgrade option with VLAN, QoS, and web management TP-Link TL-SG1008P 8-Port Gigabit PoE Switch — add PoE capability to your network edge Cat6 Ethernet patch cables — for reliable Gigabit connections throughout your installation 19-inch rack cabinet or patch panel — for structured cabling in comms cabinets Frequently Asked Questions Does the TL-SG1016D require any configuration? No. It is completely plug-and-play. Connect your Ethernet cables and the switch operates immediately — no software, login, or setup required. Can the TL-SG1016D be rack-mounted? Yes. It supports both desktop placement and 19-inch rackmount installation. Rack ears are typically included in the box. Does this switch support PoE? No. The TL-SG1016D does not support Power over Ethernet. If you need PoE for IP cameras or wireless access points, consider a TP-Link PoE switch such as the TL-SG1008P or TL-SG1218P. Is the TL-SG1016D suitable for CCTV and IP camera networks? Yes, for installations where VLAN isolation is not required. It provides reliable Gigabit connectivity for IP cameras and NVRs. For larger or more security-conscious deployments, a managed or Easy Smart switch with VLAN support is recommended. What is the difference between the TL-SG1016D and TL-SG1016DE? The TL-SG1016D is fully unmanaged with no configuration options. The TL-SG1016DE adds web-based management including VLAN, QoS, IGMP Snooping, and Port Mirroring — making it better suited to business and surveillance network deployments that require traffic control. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

Compact Gigabit PoE++ Power for Desktops, Workbenches & Small Installations The TP-Link TL-SG1006PP is a plug-and-play 6-port gigabit desktop switch that delivers both data and power over a single Ethernet cable. With one 60W PoE++ port and three 30W PoE+ ports, it's purpose-built for powering high-demand devices like PTZ cameras, wireless access points, and VoIP phones — all from a compact, fanless desktop unit. Ideal for small offices, retail counters, and on-site security installations across Australia. Key Features 1× PoE++ Port (802.3bt) — Up to 60W — Power high-demand devices such as PTZ cameras, multi-radio access points, or thin clients from a single port. 3× PoE+ Ports (802.3at/af) — Up to 30W Each — Power standard IP cameras, VoIP phones, and wireless APs without separate power adaptors. 64W Total PoE Budget — Sufficient for a mixed deployment of PoE and PoE++ devices in a small installation. 6× Gigabit RJ45 Ports — Full gigabit speeds across all ports for fast, low-latency data transfer. Extend Mode (up to 250m) — Extend PoE data and power transmission up to 250 metres at 10 Mbps — useful for cameras positioned far from the switch. PoE Auto Recovery — Automatically detects and reboots unresponsive PoE devices, reducing the need for manual intervention on-site. 802.1p/DSCP QoS — Prioritises latency-sensitive traffic such as video streams and VoIP calls for smoother performance. Plug and Play — No configuration, no software, no login. Connect and go. Desktop Form Factor — Compact and fanless design suits desktops, shelves, and small comms enclosures. Use Cases PTZ Camera Power — The 60W PoE++ port can power demanding PTZ cameras that exceed standard PoE+ limits. Small CCTV Installations — Power up to 3 standard IP cameras and one high-power device from a single compact switch. Small Office Networking — Connect workstations, a VoIP phone, and a wireless AP from one desktop unit without a rack. Retail & Hospitality — Discreet desktop placement behind a counter to power a camera, EFTPOS terminal hub, and AP simultaneously. Remote or Extended Runs — Use Extend Mode to reach cameras or APs up to 250m away without additional hardware. IT Technicians On-Site — Portable plug-and-play switch for temporary deployments, testing, or staged rollouts. Technical Specifications Specification Detail Model TL-SG1006PP Total Ports 6× 10/100/1000 Mbps RJ45 PoE++ Port 1× Port (802.3bt) — up to 60W PoE+ Ports 3× Ports (802.3at/af) — up to 30W each Total PoE Budget 64W PoE Standards IEEE 802.3af / 802.3at / 802.3bt QoS 802.1p / DSCP Extend Mode Range Up to 250m at 10 Mbps PoE Auto Recovery Yes Form Factor Desktop (fanless) Weight 860g Vendor TP-Link Downloads 📄 Download TL-SG1006PP Datasheet (PDF) Frequently Asked Questions What is the difference between PoE, PoE+, and PoE++? PoE (802.3af) delivers up to 15.4W per port, PoE+ (802.3at) delivers up to 30W, and PoE++ (802.3bt) delivers up to 60W or 90W depending on the type. The TL-SG1006PP includes one 60W PoE++ port and three 30W PoE+ ports, making it suitable for both standard and high-power devices. Can I power a PTZ camera from this switch? Yes. PTZ cameras typically require 25–50W depending on the model. The 60W PoE++ port on the TL-SG1006PP can comfortably power most PTZ cameras. Check your camera's power specification before connecting. Does the 64W PoE budget cover all 4 PoE ports simultaneously? The total PoE budget is 64W shared across all PoE ports. If you connect a 60W device to the PoE++ port, the remaining 4W is available for the PoE+ ports. Plan your device power draw accordingly to avoid exceeding the budget. Does this switch require any configuration? No. The TL-SG1006PP is fully unmanaged and plug-and-play. Extend Mode and other hardware features are toggled via physical DIP switches on the unit — no software or login required. What is PoE Auto Recovery and why does it matter? PoE Auto Recovery monitors connected PoE devices and automatically power-cycles any that become unresponsive. This is particularly useful for IP cameras and wireless APs that may occasionally freeze, eliminating the need for a manual site visit to reboot the device. Is this switch suitable for outdoor use? No. The TL-SG1006PP is designed for indoor desktop use. For outdoor or harsh-environment installations, use a weatherproof enclosure or choose a switch rated for outdoor deployment.

Read more less

Power and Connect Up to 24 IP Cameras or PoE Devices — No Configuration Required The TP-Link TL-SL1226P is a rack-mountable 24-port PoE+ unmanaged switch built for security installers and network professionals who need reliable, high-power PoE delivery without the complexity of managed switching. With a 250W PoE budget, 250m Extend Mode, and plug-and-play operation, it's one of the most practical switches for IP camera deployments across Australian commercial and residential installations. Key Features 24× PoE+ Ports (802.3at/af) — Power and connect IP cameras, VoIP phones, and wireless access points over a single Cat5e/6 cable, up to 30W per port. 250W Total PoE Budget — Sufficient headroom to simultaneously power a full deployment of standard IP cameras or mixed PoE devices. Extend Mode (up to 250m) — Transmit data and power up to 250 metres at 10 Mbps — ideal for large sites where cameras are positioned far from the switch. Priority Mode — Ports 1–8 are automatically assigned high priority, ensuring video streams from critical cameras are never starved of bandwidth. Isolation Mode — One-click client traffic separation improves network security and performance in multi-tenant or shared environments. 2× Gigabit RJ45 Uplinks + 2× Combo SFP Slots — Flexible uplink options for connecting to your core network switch or fibre backbone. Plug and Play — No software, no login, no configuration. Unbox, rack, and connect. Physical Security Lock — Prevents accidental disconnection of the power cable in rack environments. Use Cases IP CCTV Installations — Power and connect up to 24 IP cameras from a single switch in commercial or multi-site surveillance deployments. VoIP Phone Systems — Deliver power and data to desk phones across an office floor without separate power adaptors. Wireless Access Point Deployments — Power ceiling-mounted APs throughout a building from a central comms room. Large-Site Surveillance (Extend Mode) — Reach cameras in car parks, warehouses, or perimeter locations up to 250m away without a media converter. Education & Hospitality — Isolation Mode makes it suitable for guest networks or student lab environments requiring traffic separation. Technical Specifications Specification Detail Model TL-SL1226P PoE Ports 24× 10/100 Mbps RJ45 (PoE+, 802.3at/af) Uplink Ports 2× Gigabit RJ45 + 2× Combo Gigabit SFP PoE Power Budget 250W total / up to 30W per port Switching Capacity 8.8 Gbps MAC Address Table 8K Extend Mode Range Up to 250m at 10 Mbps Dimensions (W×D×H) 440 × 180 × 44 mm (1U Rack) Power Supply 100–240V AC, 50/60 Hz Max Power Consumption 18.32W (no PD) / 294W (250W PD load) Cooling 2× Internal Fans Physical Security Lock Yes Network Media Cat3/4/5 (10BASE-T), Cat5/5e (100BASE-TX), Cat5e/6+ (1000BASE-T), MMF/SMF (1000BASE-X) Certifications FCC, CE, RoHS Frequently Asked Questions How many IP cameras can this switch power simultaneously? With a 250W PoE budget and up to 30W per port, the TL-SL1226P can power up to 24 cameras. In practice, the number depends on each camera's power draw. Most standard IP cameras consume 5–15W, so you can typically run a full 24-camera deployment comfortably within the budget. What is Extend Mode and when should I use it? Extend Mode reduces the port speed to 10 Mbps and extends the PoE transmission range from the standard 100m up to 250m. Use it when cameras are located far from the switch — such as in car parks, warehouses, or along building perimeters — to avoid running additional cable or installing a media converter. Does this switch require any software or configuration? No. The TL-SL1226P is fully unmanaged and plug-and-play. Simply connect your devices and it operates automatically. Extend Mode, Priority Mode, and Isolation Mode are toggled via physical DIP switches on the unit — no login or software required. Can I connect this to a fibre uplink? Yes. The two combo Gigabit SFP slots accept standard SFP modules (sold separately), allowing you to connect to a fibre backbone or a core managed switch in your comms room. Is this switch rack-mountable? Yes. The TL-SL1226P is a 1U rack-mount unit (440mm wide) and includes rack-mount hardware in the box, making it suitable for standard 19-inch equipment racks. What's the difference between Priority Mode and Isolation Mode? Priority Mode assigns higher bandwidth priority to ports 1–8, ensuring video streams from critical cameras are not disrupted by other traffic. Isolation Mode prevents connected devices from communicating directly with each other through the switch, improving security and reducing broadcast traffic — useful in multi-tenant or guest network scenarios.

Read more less

TP-Link TL-SG1005P-PD 5-Port Gigabit PoE+ Switch with PoE++ In Power Your Surveillance Network Without the Complexity The TP-Link TL-SG1005P-PD is a compact, plug-and-play gigabit PoE+ switch designed for security installers and facilities managers who need reliable power and data delivery to IP cameras and access control devices. Powered entirely via PoE++ (802.3bt), it eliminates the need for a separate power adapter — ideal for tight equipment rooms, wall-mount enclosures, and remote deployments across Australia. Key Features 5 × Gigabit RJ45 Ports — Full 10/100/1000 Mbps auto-negotiation on all ports for high-throughput video streams. 1 × PoE++ Input (802.3bt) — Accepts upstream PoE power from a PoE++ injector or switch; no AC/DC adapter required. 4 × PoE+ Output Ports — Delivers up to 66 W total PoE budget (varies by upstream power standard: 66 W / 47 W / 21 W / 9 W). Long-Range PoE+ (Extend Mode) — Extends PoE transmission up to 250 m at 10 Mbps, perfect for perimeter cameras and large-site deployments. PoE Auto Recovery — Automatically reboots unresponsive powered devices (PDs) to maintain uptime without manual intervention. Fanless, Silent Operation — No moving parts; suitable for offices, retail spaces, and noise-sensitive environments. Metal Casing — Durable construction supports desktop or wall-mount installation. Plug and Play — Zero configuration required; ready to deploy straight out of the box. Use Cases Extending PoE to IP cameras in locations without a nearby power outlet Powering access control readers, intercoms, and VoIP phones from a single upstream PoE++ source Long-range camera runs in warehouses, car parks, and large commercial sites Clean, cable-managed installs inside network enclosures where AC power is unavailable Technical Specifications Specification Detail Model TL-SG1005P-PD Total Ports 5 × 10/100/1000 Mbps RJ45 PoE Input Port Port 1 — 802.3bt Type 4 (PoE++) PoE Output Ports Ports 2–5 — 802.3at (PoE+) / 802.3af (PoE) PoE Budget (802.3bt Type 4 input) Up to 66 W PoE Budget (802.3bt Type 3 input) Up to 47 W PoE Budget (802.3at input) Up to 21 W PoE Budget (802.3af input) Up to 9 W Long-Range Extend Mode Up to 250 m at 10 Mbps Power Supply PoE only (no AC/DC adapter) Casing Metal Mounting Desktop / Wall-mount Cooling Fanless Weight 0.36 kg Barcode (EAN) 4895252501117 Downloads TL-SG1005P-PD Datasheet (PDF) Frequently Asked Questions Does the TL-SG1005P-PD require a separate power adapter? No. This switch is powered exclusively via PoE++ (802.3bt) through Port 1. It does not support AC or DC power input. You will need a compatible PoE++ injector or upstream switch to power it. How much PoE power can it deliver to connected cameras? The total PoE output budget depends on the upstream power source: up to 66 W with an 802.3bt Type 4 input, 47 W with Type 3, 21 W with 802.3at, and 9 W with 802.3af. Budget is shared across all four output ports. What is Extend Mode and when should I use it? Extend Mode reduces port speed to 10 Mbps to push PoE up to 250 m over a single Cat5e/Cat6 cable. Use it when running cameras to distant locations where a standard 100 m run isn't sufficient — common in car parks, warehouses, and large perimeter installations. What happens if a connected camera stops responding? The PoE Auto Recovery feature detects unresponsive powered devices and automatically power-cycles them, restoring operation without requiring a site visit or manual reboot. Can I mount this switch on a wall? Yes. The TL-SG1005P-PD supports both desktop and wall-mount installation. Its metal casing is suited to equipment rooms, server racks, and on-wall enclosures.

Read more less

TP-Link TL-SG1210PP – 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ The TP-Link TL-SG1210PP is a plug-and-play 10-port Gigabit switch that steps up from standard PoE+ with two IEEE 802.3bt PoE++ ports capable of delivering up to 60W each — enough to power high-wattage PTZ cameras, multi-radio access points, and other demanding PoE devices. Combined with six PoE+ ports (30W each), a 123W total budget, Extend Mode for 250-metre cable runs, PoE Auto Recovery, and a Combo SFP/RJ45 uplink port, it’s a versatile switch for professional security and network installations across Australia. Key Features 2 × PoE++ Ports (IEEE 802.3bt): Ports 1–2 deliver up to 60W each for high-power devices such as PTZ cameras, multi-radio APs, and video conferencing equipment. 6 × PoE+ Ports (IEEE 802.3at): Ports 3–8 deliver up to 30W each for standard IP cameras, APs, VoIP phones, and access control devices. 123W Total PoE Budget: Generous shared budget across all eight PoE ports with intelligent power management. 1 × Combo SFP/RJ45 Uplink Port: Flexible uplink via Gigabit SFP fibre transceiver or standard RJ45 Ethernet — whichever suits your installation. Extend Mode — Up to 250m: Transmits data and PoE power up to 250 metres over a single Cat5e/6 cable at 10Mbps, ideal for long cable runs to remote cameras. PoE Auto Recovery: Automatically detects and reboots unresponsive PoE-powered devices (cameras, APs) without manual intervention — critical for unmanned installations. Priority Mode: Ports 1–2 are assigned high priority to guarantee power and bandwidth for the most critical devices in the installation. Isolation Mode: One-click client traffic separation prevents devices on the switch from communicating with each other — useful for multi-tenant security and guest network isolation. 802.1p/DSCP QoS: Prioritises latency-sensitive traffic such as video streams and VoIP for consistent performance. Plug and Play: No configuration, software, or web interface required — connect and power on. Ideal Use Cases Powering high-wattage PTZ cameras (up to 60W) on Ports 1–2 alongside standard IP cameras on the remaining PoE+ ports. Deploying multi-radio Wi-Fi 6 access points requiring PoE++ power alongside standard PoE devices on a single switch. Long cable run installations using Extend Mode to reach cameras or APs up to 250 metres from the switch. Connecting to a core switch or router via the Combo SFP/RJ45 uplink using fibre or copper as required. Multi-tenant or shared environments where Isolation Mode keeps client traffic separated without additional VLANs or managed switches. Unmanned installations where PoE Auto Recovery ensures cameras and APs self-recover without site visits. Technical Specifications Specification Detail Model TL-SG1210PP RJ45 Ports 9 × 10/100/1000Mbps RJ45 Combo Uplink Port 1 × 1000Mbps Combo SFP/RJ45 PoE++ Ports 2 (Ports 1–2) — IEEE 802.3bt, up to 60W each PoE+ Ports 6 (Ports 3–8) — IEEE 802.3at, up to 30W each PoE Standard IEEE 802.3af / 802.3at / 802.3bt Total PoE Budget 123W Extend Mode Range Up to 250m (10Mbps, Cat5e/6) PoE Auto Recovery Yes Priority Mode Ports 1–2 high priority Isolation Mode Yes (one-click client traffic separation) QoS 802.1p / DSCP Configuration Plug and play (no configuration required) Weight 1.6kg SKU TL-SG1210PP Barcode (EAN) 4895252500349 Downloads TL-SG1210PP Datasheet (PDF) Frequently Asked Questions What is the difference between PoE+, PoE++, and standard PoE? Standard PoE (IEEE 802.3af) delivers up to 15.4W per port. PoE+ (IEEE 802.3at) delivers up to 30W. PoE++ (IEEE 802.3bt) delivers up to 60W (Type 3) or 100W (Type 4). The TL-SG1210PP’s Ports 1–2 support PoE++ at up to 60W, making them suitable for high-power devices that standard PoE+ cannot support. Which devices can I power on the PoE++ ports? Any IEEE 802.3af/at/bt compliant device drawing up to 60W — including high-wattage PTZ cameras, multi-radio Wi-Fi 6 access points, video conferencing endpoints, and industrial IoT devices. Always check your device’s PoE power requirement before connecting. What is Extend Mode and when should I use it? Extend Mode allows the switch to transmit data and PoE power up to 250 metres over a single Cat5e or Cat6 cable at 10Mbps. Use it when camera or AP cable runs exceed the standard 100-metre Ethernet limit — common in large properties, warehouses, and outdoor installations. What does PoE Auto Recovery do? PoE Auto Recovery monitors connected PoE devices and automatically reboots any that become unresponsive or go offline, without requiring manual intervention. This is particularly valuable for IP cameras and APs in unmanned or hard-to-access locations. Can I use both the SFP and RJ45 on the Combo uplink port simultaneously? No. The Combo SFP/RJ45 port (Port 10) is a shared port — only one interface (SFP or RJ45) can be active at a time. The SFP connection takes priority when both are connected. What is the difference between the TL-SG1210PP and the TL-SG1210P? The TL-SG1210PP adds two PoE++ ports (up to 60W each, IEEE 802.3bt) on Ports 1–2, plus Extend Mode, PoE Auto Recovery, Priority Mode, and Isolation Mode — features not present on the TL-SG1210P. It also has a higher 123W total PoE budget versus the TL-SG1210P’s 63W. Choose the TL-SG1210PP when you need to power high-wattage devices or require the additional intelligent PoE management features.

Read more less

TP-Link TL-SG1016 — 16-Port Gigabit Rackmount Unmanaged Switch The TP-Link TL-SG1016 is a reliable, plug-and-play 16-port Gigabit switch built for professional network installations. With a fanless design, 19-inch rack-mountable steel chassis, and energy-efficient operation, it's an ideal backbone switch for CCTV systems, small-to-medium business networks, and structured cabling environments across Australia. Description Designed for installers and IT professionals who need dependable, high-throughput switching without the complexity of managed configuration, the TL-SG1016 delivers 32Gbps switching capacity across 16 Gigabit ports. Its store-and-forward architecture ensures clean, reliable data transfer — critical for IP camera networks and high-density office environments. The fanless design means silent operation, making it equally suited to server rooms and discreet cabinet installations. Key Features 16 × 10/100/1000Mbps RJ45 ports with Auto Negotiation and Auto MDI/MDIX 32Gbps switching capacity with 23.8Mpps packet forwarding rate Fanless, silent operation — no moving parts Standard 19-inch rack-mountable steel case (1U) Energy-efficient Green Technology reduces power consumption automatically 8K MAC address table with self-learning Supports 802.1p/DSCP QoS (V12 and later) Jumbo frame support up to 10KB Wide voltage input: 100–240VAC, 50/60Hz Maximum power consumption: 10.44W Use Cases IP CCTV Networks: Aggregate multiple IP cameras into a single rack-mounted switch for clean, centralised network management Small Business Networks: Connect workstations, printers, and servers with full Gigabit throughput Structured Cabling Installations: Terminate patch panel runs in a standard 19-inch rack environment Server Room / Data Closet: Silent fanless operation keeps noise levels low in sensitive environments Education and Hospitality: Cost-effective Gigabit connectivity for high-density user environments Specifications Specification Detail Model TL-SG1016 Ports 16 × 10/100/1000Mbps RJ45 Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.1p Switching Capacity 32Gbps Packet Forwarding Rate 23.8Mpps MAC Address Table 8K Jumbo Frame 10KB Transfer Method Store-and-Forward QoS 802.1p/DSCP (V12 and later) Network Media 10BASE-T: Cat3/4/5 (max 100m) · 100BASE-TX/1000BASE-T: Cat5/5e+ (max 100m) Fan Fanless Power Supply 100–240VAC, 50/60Hz Max Power Consumption 10.44W Max Heat Dissipation 35.60 BTU/h Dimensions (W × D × H) 440 × 180 × 44mm (17.3 × 7.1 × 1.7 in) Mounting 19-inch Rack Mountable (1U) Weight 2.2kg Green Technology Yes Frequently Asked Questions Is the TL-SG1016 managed or unmanaged? The TL-SG1016 is an unmanaged switch — it requires no configuration and is ready to use straight out of the box. Simply connect your devices and it handles the rest automatically. Does it support PoE (Power over Ethernet)? No, the TL-SG1016 does not support PoE. If you need to power IP cameras or access points directly from the switch, consider a TP-Link PoE switch from our range. Is it suitable for IP CCTV installations? Yes. The TL-SG1016 is well-suited to IP camera networks, providing full Gigabit throughput on all 16 ports and a clean rack-mount form factor for professional installations. What rack size does it fit? The TL-SG1016 fits a standard 19-inch equipment rack and occupies 1U of rack space. Does it support jumbo frames? Yes, jumbo frames up to 10KB are supported, which can improve throughput efficiency for large data transfers on your network. Is QoS supported on all versions? 802.1p/DSCP QoS is supported on V12 and later hardware versions of the TL-SG1016.

Read more less

TP-Link TL-SF1024 24-Port 10/100Mbps Rackmount Unmanaged Switch A cost-effective, high-port-count Fast Ethernet switch built for the rack. The TP-Link TL-SF1024 delivers 24 ports of 10/100Mbps connectivity in a standard 19-inch, 1U steel rackmount chassis — complete with a rackmount kit included in the box. With plug-and-play simplicity, fanless silent operation, and Green Technology saving up to 75% power, it’s a reliable, low-maintenance choice for comms cabinets, server rooms, and small business network infrastructure. Key Features 24 × 10/100Mbps Auto-Negotiation RJ45 ports for reliable Fast Ethernet connectivity Auto MDI/MDIX on all ports — no crossover cables required 4.8Gbps switching capacity with a 3.57Mpps packet forwarding rate 8K MAC address table with auto-learning 2Mb buffer memory for handling traffic bursts Store-and-forward switching for error-free packet delivery IEEE 802.3x flow control for reliable, congestion-free data transfer Green Technology — saves up to 75% power by adjusting consumption based on link status and cable length Fanless design — completely silent operation Standard 19-inch, 1U steel rackmount case — rackmount kit and rubber feet included Internal power supply (100–240V AC) — no external adapter required FCC, CE, and RoHS certified Plug and play — no configuration or software required Use Cases Comms cabinet or server room deployments requiring a high-port-count Fast Ethernet switch Expanding wired network capacity in small to medium offices or retail environments Upgrading legacy 10Mbps networks to Fast Ethernet (100Mbps) Connecting up to 24 wired devices in a cost-effective, unmanaged rack setup Energy-conscious deployments where low power draw and silent operation are priorities Specifications Specification Detail Model TL-SF1024 Ports 24 × 10/100Mbps RJ45 Standards IEEE 802.3i, 802.3u, 802.3x Switching Capacity 4.8 Gbps Packet Forwarding Rate 3.57 Mpps MAC Address Table 8K Buffer Memory 2Mb Transfer Method Store-and-Forward Flow Control IEEE 802.3x Energy Saving Up to 75% (Green Technology) Fan Fanless (silent) Power Supply Internal — 100–240V AC, 50/60Hz Max Power Consumption 3.53W (220V/50Hz) Mounting 19-inch rackmount, 1U (kit included) Case Steel Dimensions (W × D × H) 440 × 180 × 44 mm Operating Temperature 0°C – 40°C Certifications FCC, CE, RoHS Weight 2.26 kg In the Box Switch, power cord, rackmount kit, rubber feet, installation guide SKU TL-SF1024 Vendor TP-Link Recommended Accessories TP-Link TL-SG1024D 24-Port Gigabit Unmanaged Switch — upgrade option for full Gigabit speeds in the same form factor TP-Link TL-SG1024DE 24-Port Gigabit Easy Smart Switch — adds VLAN, QoS, and web management Cat5e Ethernet patch cables — for reliable 100Mbps connections throughout your installation 19-inch rack cabinet or patch panel — for structured cabling in comms cabinets Frequently Asked Questions Does the TL-SF1024 require any configuration? No. It is a fully unmanaged, plug-and-play switch. Connect your Ethernet cables and it works immediately — no software, login, or setup required. Does the rackmount kit come included? Yes. The TL-SF1024 includes a rackmount kit, power cord, rubber feet, and installation guide in the box. No additional accessories are required for standard 19-inch rack installation. What is the difference between the TL-SF1024 and the TL-SG1024D? The TL-SF1024 supports 10/100Mbps (Fast Ethernet). The TL-SG1024D supports 10/100/1000Mbps (Gigabit Ethernet), offering up to 10× faster throughput. If your devices and cabling support Gigabit, the TL-SG1024D is the better long-term investment at a similar price point. Is the TL-SF1024 suitable for CCTV and IP camera networks? Yes, for installations where 100Mbps bandwidth is sufficient per camera. For higher-resolution IP cameras or NVR systems requiring more bandwidth, a Gigabit switch such as the TL-SG1024D is recommended. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link TL-SG1024 24-Port Gigabit Unmanaged Network Switch Overview The TP-Link TL-SG1024 is a 24-port gigabit unmanaged switch designed for small-to-medium business networks, security installations, and server rooms. With a 48Gbps non-blocking switching capacity and energy-efficient chipset, it delivers reliable, wire-speed performance straight out of the box — no configuration required. Key Features 24 × 10/100/1000Mbps RJ45 ports for full gigabit connectivity 48Gbps non-blocking switching capacity for maximum throughput 100% data filtering rate — eliminates all error packets Energy-efficient technology reduces power consumption by up to 25% Supports IEEE 802.3x flow control (Full Duplex) and backpressure (Half Duplex) Auto-MDI/MDIX on all ports — no crossover cables needed MAC address auto-learning and auto-aging Store-and-Forward switching with N-Way Auto-Negotiation per port Plug-and-play — no software or configuration required 19" rackmountable, compact desktop-friendly form factor Use Cases CCTV & IP Camera Networks: Expand your NVR or DVR network with dedicated gigabit ports for high-bandwidth IP cameras Small Business Networks: Connect workstations, printers, and servers in a single, reliable switch Server Rooms & Comms Cabinets: Rackmount in a 19" cabinet for a clean, professional installation Access Control Systems: Provide network backbone for IP-based access control panels and readers Home Lab & AV Installations: Ideal for structured cabling projects requiring multiple gigabit drops Specifications Specification Detail Model TL-SG1024 Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x Ports 24 × 10/100/1000Mbps RJ45 Switching Capacity 48Gbps Packet Forwarding Rate 35.7Mpps MAC Address Table 8K Switching Method Store and Forward Flow Control IEEE 802.3x (Full Duplex), Backpressure (Half Duplex) Form Factor 19" Rackmountable / Desktop Weight 2.34 kg Vendor TP-Link SKU TL-SG1024 Recommended Accessories Cat6 Patch Cables — for clean, high-speed port connections 19" Rack Cabinet or Wall-Mount Enclosure — for rackmount installations TP-Link Gigabit PoE Switch — if powering IP cameras or access control devices Cable Management Panel — for tidy comms cabinet builds Frequently Asked Questions Is the TL-SG1024 managed or unmanaged? It is an unmanaged switch — plug it in and it works immediately with no configuration, login, or software required. Can I use this switch for IP cameras? Yes. The 24 gigabit ports and 48Gbps switching capacity make it well-suited for IP camera networks connected to an NVR. Note: this switch does not supply PoE power — cameras will require a separate PoE switch or injectors. Does it support VLANs? No. As an unmanaged switch, VLAN configuration is not supported. For VLAN support, consider a managed gigabit switch. Is it rackmountable? Yes. The TL-SG1024 fits a standard 19" rack and includes rack-mount ears. What is the warranty on this product? TP-Link products sold through CCTV Guru are covered by the manufacturer's Australian warranty. Please refer to the TP-Link Australia warranty policy for full terms.

Read more less

TP-Link TL-SG1008 — 8-Port Gigabit Unmanaged Switch The TP-Link TL-SG1008 is a reliable, plug-and-play gigabit switch designed for small offices, home networks, and security system installations. With eight gigabit ports, a fanless steel chassis, and support for both desktop and 19-inch rack mounting, it delivers fast, quiet, and flexible connectivity right out of the box. Key Features 8 × 10/100/1000Mbps RJ45 ports for full gigabit connectivity 16 Gbps switching capacity with non-blocking architecture Fanless design — completely silent operation Plug and play — no configuration or software required Desktop and 19-inch rackmount compatible (1U) Energy-efficient technology reduces power consumption by up to 60% Auto-MDI/MDIX — no crossover cables needed IEEE 802.3x flow control (Full Duplex) and backpressure (Half Duplex) MAC address auto-learning and auto-aging 100% data filtering — eliminates error packets Compact steel case for durability in professional environments Use Cases CCTV & IP Camera Systems: Expand network ports for NVRs and IP cameras without complex configuration Small Office Networks: Connect workstations, printers, and NAS devices on a single gigabit network Home Networks: Extend wired connections from a router or modem to multiple devices Server Rooms & Comms Cabinets: Rackmount in a 19-inch cabinet for a clean, professional installation Retail & POS Environments: Reliable wired connectivity for point-of-sale terminals and peripherals Technical Specifications Specification Detail Model TL-SG1008 Ports 8 × 10/100/1000Mbps RJ45 Switching Capacity 16 Gbps Forwarding Mode Store and Forward MAC Address Table 4K Flow Control IEEE 802.3x (Full Duplex), Backpressure (Half Duplex) Mounting Desktop / 19-inch Rack (1U) Cooling Fanless (passive) Chassis Steel Power Saving Up to 60% energy reduction Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x SKU TL-SG1008 Frequently Asked Questions Does the TL-SG1008 require any software or configuration? No. The TL-SG1008 is a fully unmanaged switch — simply plug in your network cables and it works immediately. There is no software, web interface, or configuration required. Can it be rackmounted? Yes. The TL-SG1008 supports both desktop placement and 19-inch rack mounting (1U). Rack mount brackets are included in the box. Is it suitable for use with IP cameras and NVRs? Absolutely. The TL-SG1008 is a popular choice for CCTV and IP camera installations. It provides eight gigabit ports to connect IP cameras, NVRs, and other network devices without any configuration overhead. Is the fan noisy? The TL-SG1008 is completely fanless, meaning it operates in total silence. This makes it ideal for office environments, home installations, and anywhere noise is a concern. Does it support PoE (Power over Ethernet)? No. The TL-SG1008 does not support PoE. If you need to power IP cameras or access points directly from the switch, consider a TP-Link PoE switch from our range. Is this product in stock and available in Australia? Yes. The TL-SG1008 is stocked locally and ships Australia-wide from CCTV Guru. Orders are dispatched promptly from our Australian warehouse.

Read more less

TP-Link TL-SG1024D 24-Port Gigabit Unmanaged Switch Reliable, no-fuss Gigabit switching for 24 devices. The TP-Link TL-SG1024D is a fully unmanaged, plug-and-play switch that delivers 48Gbps of switching capacity across 24 Gigabit ports — with zero configuration required. Its fanless design keeps things quiet, and its compact rackmount chassis fits neatly into server rooms, comms cabinets, or on a desktop. Key Features 24 × 10/100/1000Mbps Auto-Negotiation RJ45 ports for full Gigabit connectivity 48Gbps switching capacity with a 35.7Mpps packet forwarding rate 10K Jumbo Frame support for high-throughput large file transfers Store-and-forward switching for reliable, error-free data delivery IEEE 802.3x flow control for congestion management Auto MDI/MDIX on all ports — no crossover cables needed MAC address self-learning with an 8K MAC address table Fanless design — silent operation, ideal for office and retail environments Energy-efficient Green Technology reduces power consumption automatically Plug and play — no software, no login, no configuration required Desktop and 19-inch rackmount form factor for flexible installation Use Cases Expanding wired network capacity in small to medium offices IP camera and NVR network infrastructure where management features are not required Server room or comms cabinet deployments needing a simple, high-port-count switch Retail, hospitality, and education environments requiring quiet, reliable switching Replacing ageing 10/100 switches with a full Gigabit upgrade Specifications Specification Detail Model TL-SG1024D Ports 24 × 10/100/1000Mbps RJ45 Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x Switching Capacity 48 Gbps Packet Forwarding Rate 35.7 Mpps MAC Address Table 8K Jumbo Frame 10K bytes Transfer Method Store-and-Forward Flow Control IEEE 802.3x Fan Fanless (silent) Power Supply 100–240V AC, 50/60Hz Max Power Consumption 13.62W (220V/50Hz) Max Heat Dissipation 46.44 BTU/h Dimensions (W × D × H) 294 × 180 × 44 mm Mounting Desktop / Rackmount (19-inch) Weight 2 kg SKU TL-SG1024D Vendor TP-Link Recommended Accessories TP-Link TL-SG1024DE Easy Smart Switch — upgrade option with VLAN, QoS, and web management TP-Link TL-SG1008P 8-Port Gigabit PoE Switch — add PoE capability to your network edge Cat6 Ethernet patch cables — for reliable Gigabit connections throughout your installation 19-inch rack cabinet or patch panel — for structured cabling in comms cabinets Frequently Asked Questions What is the difference between the TL-SG1024D and the TL-SG1024DE? The TL-SG1024D is a fully unmanaged switch — plug in and go, with no configuration options. The TL-SG1024DE adds web-based management with VLAN, QoS, IGMP Snooping, and Port Mirroring. If you need traffic segmentation or network monitoring, choose the TL-SG1024DE. Does the TL-SG1024D require any configuration? No. It is completely plug-and-play. Connect your Ethernet cables and the switch operates immediately with no software, login, or setup required. Can the TL-SG1024D be rack-mounted? Yes. The TL-SG1024D supports both desktop placement and 19-inch rackmount installation. Rack ears are typically included in the box. Does this switch support PoE? No. The TL-SG1024D does not support Power over Ethernet. If you need PoE for IP cameras or wireless access points, consider a TP-Link PoE switch such as the TL-SG1008P or TL-SG1218P. Is the TL-SG1024D suitable for CCTV and IP camera networks? Yes, for installations where VLAN isolation is not required. It provides reliable Gigabit connectivity for IP cameras and NVRs. For larger or more security-conscious deployments, the TL-SG1024DE with VLAN support is recommended. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link TL-SF1008P 8-Port Fast Ethernet Unmanaged PoE Switch Power and connect your IP cameras, access points, and VoIP phones over a single cable. The TP-Link TL-SF1008P is a compact, fanless 8-port 10/100Mbps unmanaged switch with 4 IEEE 802.3af PoE ports and a 57W total power budget. No configuration required — simply plug in your devices and the switch automatically detects and supplies power to any 802.3af-compliant powered device (PD). Ideal for small surveillance systems, home offices, and anywhere a tidy single-cable installation is preferred. Key Features 8 × 10/100Mbps RJ45 ports with Auto-Negotiation and Auto MDI/MDIX 4 × IEEE 802.3af PoE ports (ports 1–4) — up to 15.4W per port, 57W total PoE budget Automatically detects and powers 802.3af-compliant devices — no manual configuration 1.6Gbps backplane bandwidth for non-blocking switching performance 2K MAC address table with auto-learning Fanless design — completely silent operation, ideal for office and home environments External 48V DC power adapter — compact and lightweight chassis Supports Cat3/4/5 cable up to 100m (10BASE-T) and Cat5/5e up to 100m (100BASE-TX) Plug and play — no software, no login, no configuration required Use Cases Powering and connecting IP cameras in small CCTV and surveillance installations Connecting wireless access points via PoE in home or small office environments Powering VoIP desk phones without separate power adapters Small business reception areas, retail counters, or meeting rooms needing tidy single-cable runs Expanding a home or office network with PoE capability for smart devices Specifications Specification Detail Model TL-SF1008P Total Ports 8 × 10/100Mbps RJ45 PoE Ports 4 (ports 1–4) PoE Standard IEEE 802.3af PoE Power Per Port Up to 15.4W Total PoE Budget 57W Backplane Bandwidth 1.6 Gbps MAC Address Table 2K (auto-learning) Auto-Negotiation / MDI/MDIX Yes (all ports) Fan Fanless (silent) Power Supply External adapter — 48V DC / 1.25A Max Power Consumption (PoE on) 60.2W (220V/50Hz) Max Power Consumption (PoE off) 3.2W (220V/50Hz) Dimensions (W × D × H) 171 × 98 × 27 mm Form Factor Desktop Weight 1.04 kg SKU TL-SF1008P Vendor TP-Link Recommended Accessories TP-Link TL-SG1008P 8-Port Gigabit PoE Switch — upgrade option with Gigabit speeds on all ports TP-Link TL-POE10R Gigabit PoE Splitter — add PoE power to non-PoE devices on the same network Cat5e Ethernet patch cables — for reliable 100Mbps and PoE connections up to 100m IP cameras compatible with IEEE 802.3af — power and connect over a single cable Frequently Asked Questions What is the difference between the TL-SF1008P and the TL-SG1008P? The TL-SF1008P is a Fast Ethernet switch with 10/100Mbps ports and a 57W PoE budget. The TL-SG1008P is a Gigabit switch with 10/100/1000Mbps ports and a 53W PoE budget. If your IP cameras or devices support Gigabit, the TL-SG1008P offers faster data throughput. Both support IEEE 802.3af PoE. How many PoE devices can I connect to the TL-SF1008P? The TL-SF1008P has 4 PoE-capable ports (ports 1–4), each delivering up to 15.4W. The total PoE budget is 57W. For example, four cameras drawing 12W each would use 48W of the 57W budget, leaving headroom for the remaining power draw. Which PoE standard does the TL-SF1008P support? It supports IEEE 802.3af (PoE), providing up to 15.4W per port. It does not support 802.3at (PoE+) or 802.3bt (PoE++). Ensure your powered devices are 802.3af-compliant before purchasing. Does the TL-SF1008P require any configuration? No. It is a fully unmanaged, plug-and-play switch. It automatically detects and powers 802.3af-compliant devices — no software, login, or setup required. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Unmanaged PoE Switch16 PoE+ 10/100Mbps RJ45 ports, 2 Gigabit RJ45 ports and 2 combo Gigabit SFP slotsUp to 250m data and power transmission under extend mode specially designed for surveillance systemPriority mode for port1-8 to guarantees the quality of sensitive applications like video monitorHigh PoE power budget with up to 30W for each PoE port and 194W for all PoE portsEasy to use, with no configuration and installation neededHARDWARE FEATURES Interface 16 PoE+ 10/100Mbps RJ45 Ports 2 10/100/1000Mbps RJ45 Ports 2 Combo Gigabit SFP Slots Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-X MMF, SMF Fan Quantity 2 Fans Physical Security Lock Yes Power Supply 100-240V AC, 50/60 Hz Backup Bandwidth 7.2 Gbps PoE+ Ports(RJ45) Standard: 802.3at/802.3af compliant PoE Ports: Port1- Port16 PoE Power Budget: 192W Mac Address Table 8K Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in. (440 × 180 × 44 mm) Max Power Consumption 18.7 W (no PD connected) 217.2 W (with 192W PD connected) Max Heat Dissipation 63.9 BTU/h (no PD connected) 741.2 BTU/h (with 192W PD connected) SOFTWARE FEATURES Advanced Features Compatible with IEEE 802.3at/af compliant devices Port Priority Mode Extend Mode (Up to 250m PoE power supply and data transmission) Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control Transmission Method Store-And-Forward

Read more less

TP-Link TL-SG116E – 16-Port Gigabit Easy Smart Switch The TP-Link TL-SG116E bridges the gap between a basic unmanaged switch and a full managed switch. Sixteen Gigabit ports, a fanless silent design, and a metal enclosure make it a solid foundation for small business, surveillance, and home lab networks — while web-based management and a downloadable utility unlock L2 features including VLANs, QoS, IGMP snooping, port mirroring, and loop prevention, without the complexity or cost of a fully managed switch. Key Features 16 × Gigabit RJ45 Ports: Full 10/100/1000Mbps auto-negotiation on all ports with Auto MDI/MDIX — no crossover cables required. Easy Smart Management: Web UI and downloadable utility provide access to L2 features without requiring CLI or complex managed switch configuration. VLAN Support: Up to 32 active VLANs simultaneously (from a 4K VLAN ID pool) via MTU, Port-based, or 802.1Q Tag VLAN for network segmentation. QoS — 4 Priority Queues: Port-based, 802.1p, and DSCP priority with rate limiting and storm control for traffic management. IGMP Snooping V1/V2/V3: Optimises multicast traffic — essential for IP camera streams and IPTV deployments. Static Link Aggregation: Bond multiple ports for increased bandwidth between switches or servers. Port Mirroring: Mirror traffic from one port to another for network monitoring and troubleshooting. Loop Prevention: Automatically detects and prevents network loops without requiring STP configuration. Cable Diagnostics: Built-in tool to test and diagnose Ethernet cable faults from the management interface. Fanless Silent Operation: No moving parts — completely silent, suitable for offices, reception areas, and noise-sensitive environments. Durable Metal Casing: Professional-grade metal enclosure for long-term reliability in commercial installations. Green Technology: Automatically adjusts power consumption based on cable length and link status to reduce energy use. Ideal Use Cases Small business networks requiring VLAN segmentation between staff, guest, and IoT/camera traffic without a full managed switch. IP camera and NVR installations where IGMP snooping optimises multicast video streams across the network. Home lab and prosumer environments needing L2 features at an accessible price point. Silent office or reception deployments where fan noise is unacceptable. Desktop or wall-mounted installations requiring a compact, metal-cased 16-port switch. Network upgrades from basic unmanaged switches where VLAN and QoS control is now required. Technical Specifications Specification Detail Model TL-SG116E Ports 16 × 10/100/1000Mbps RJ45 (Auto MDI/MDIX) Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p Switching Capacity 32Gbps Packet Forwarding Rate 23.81Mpps MAC Address Table 8K Packet Buffer Memory 4.1Mb Jumbo Frame 9KB VLAN Up to 32 active VLANs (4K VLAN IDs); MTU / Port / 802.1Q Tag VLAN QoS Port-based / 802.1p / DSCP; 4 priority queues; rate limiting; storm control IGMP Snooping V1 / V2 / V3 Link Aggregation Static (up to 4 groups, 4 ports per group) Port Mirroring Yes Loop Prevention Yes Cable Diagnostics Yes Transmission Method Store-and-Forward Management Web UI & downloadable utility Fan Fanless (silent) Power Supply External adapter (9VDC / 0.6A) Power Consumption (Max) 9.27W @ 220V/50Hz Mounting Desktop / Wall Dimensions 286 × 111.7 × 25.4 mm Enclosure Metal Warranty 5 Years SKU TL-SG116E Barcode (EAN) 1210002617000 Frequently Asked Questions What is the difference between the TL-SG116E and a standard unmanaged switch? Unlike a basic unmanaged switch, the TL-SG116E provides web-based management and a downloadable utility that unlock L2 features including VLANs, QoS, IGMP snooping, port mirroring, loop prevention, and cable diagnostics. It offers meaningful network control without the cost or complexity of a fully managed switch. Does the TL-SG116E support PoE? No. The TL-SG116E does not support Power over Ethernet. If you need PoE for IP cameras, access points, or VoIP phones, consider the TP-Link TL-SG116P, which provides PoE+ on all 16 ports with a 120W budget. How many VLANs can I configure? The TL-SG116E supports up to 32 active VLANs simultaneously, drawn from a pool of 4096 VLAN IDs. VLANs can be configured as MTU, Port-based, or 802.1Q Tag VLANs via the web interface. Is it completely silent? Yes. The TL-SG116E is fanless with no moving parts, making it completely silent in operation. It’s well-suited for offices, reception areas, classrooms, and any environment where fan noise is undesirable. Can it be wall-mounted? Yes. The TL-SG116E supports both desktop and wall-mounting. Wall-mount hardware is included in the box. Is IGMP snooping useful for IP camera networks? Yes. IGMP snooping prevents multicast video streams from being flooded to all ports on the switch, directing camera streams only to the ports that have requested them. This reduces unnecessary traffic and improves overall network performance in surveillance deployments. What warranty does the TL-SG116E carry? The TL-SG116E is backed by a 5-year warranty.

Read more less