Exit Buttons

Access Control Exit Button Hikvision DS-K7P02 — Stainless Steel Exit Button The Hikvision DS-K7P02 is a robust request-to-exit button that delivers reliable door release in access control systems. Its stainless steel panel and durable metal button mechanism are built for everyday use and long service life. Compact 86 × 86 × 20 mm dimensions fit standard back boxes for a clean, discreet install, and NO/NC/COM contacts make it easy to wire into Hikvision access control infrastructure. Stainless Steel Panel Robust stainless finish for durability in everyday access control use. NO/NC/COM Output Flexible contact options for easy integration with controllers and locks. Long Mechanical Life Rated for over 100,000 presses for dependable long-term operation. Standard Fit 86 × 86 mm panel fits standard back boxes for quick installation. Specifications Model DS-K7P02 Material Stainless steel panel Rated Load 3A @ 36VDC max Output Contact NO/NC/COM Mechanical Life Over 100,000 times Panel Dimensions 86 × 86 × 20 mm Environment Indoor use Working Temp -10°C to +55°C Weight 0.08 kg Download DS-K7P02 Datasheet (PDF) How does it wire in?It provides NO/NC/COM contacts to suit most access controllers and locking hardware. Will it fit a standard back box?Yes. The 86 × 86 mm panel is sized for standard back boxes. Is it durable?Yes. The stainless panel and button are rated for over 100,000 presses. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Complete each door with the durable Hikvision DS-K7P02 stainless exit button, backed by a 3-year Australian warranty and local tech support.

Read more less

Stainless Steel | IP65 | Green LED | 1-Year Warranty WEL1911 SECOR Press-to-Exit Button — Stainless Steel, IP65, Green LED, Flying Leads The SECOR WEL1911 is a flush-mount stainless steel press-to-exit button engineered for Australian commercial, industrial and residential access control installations. With an IP65-rated housing, isolated NO and NC contacts, a high-visibility green illuminated LED ring, and a tested mechanical life of 1,000,000 cycles, the WEL1911 is the dependable request-to-exit (REX) device that finishes off a clean, professional door — from glass-front offices in Sydney CBD to back-of-house plant rooms in Perth and Brisbane warehouses. Supplied with flying leads for fast termination and rated to switch up to 2 A at 12 or 24 V DC, the WEL1911 is fully compatible with any standard maglock, electric strike or access controller — including Tecom Challenger, Inner Range Integriti/Inception, Gallagher, Paxton, ICT Protege and standalone keypads such as the SECOR WKP-series. Ingress Protection IP65 Rated Switching Capacity 2 A @ 12/24 V DC Mechanical Life 1,000,000 Cycles Plate Material 304 Stainless Steel Built for Australian Access Control Installations The WEL1911 is a fully isolated dry-contact exit button — meaning both the NO (Normally Open) and NC (Normally Closed) contacts are independent of the LED supply. That isolation lets installers wire the button directly into a fail-safe maglock loop, a fail-secure strike circuit, or as a request-to-exit input on any Australian access control panel without needing relays, diodes or protective interfaces. The illuminated green LED halo stays visible day or night and gives users an obvious visual cue at the door — reducing tailgating attempts and unnecessary calls to facilities teams. Combined with a contact resistance of ≤50 mΩ and an insulation resistance over 100 MΩ, the WEL1911 delivers the kind of long-term electrical reliability you expect from a piece of door hardware that may be pressed dozens of times a day for the next decade. Stainless Steel Flush Mount Vandal-resistant 304-grade stainless plate. Flush mounts cleanly into wall boxes or door frames for a discreet, modern look that suits any commercial fit-out. IP65 Weather Sealed Dust-tight and protected against low-pressure water jets. Suitable for sheltered outdoor exits, loading docks, car-park entries and food-handling areas. Isolated NO & NC Contacts Both contacts are electrically isolated from the LED, allowing safe integration with fail-safe maglocks, fail-secure strikes and access controller REX inputs. Green LED Halo High-brightness 12–24 V LED illumination clearly marks the exit point at all times. Red and blue LED variants are available on request. 1,000,000 Cycle Mechanical Life Heavy-duty switch mechanism rated for 50,000 electrical cycles at full load and 1 million mechanical actuations — proven longevity for high-traffic doors. Flying Lead Termination Pre-terminated flying leads simplify wiring and reduce installation time. No fiddly screw terminals on the back of the plate, no specialty tools required. Compatible with Every Australian Access Control Brand Because the WEL1911 outputs dry contact closures only, it is panel-agnostic. Wire the NO contact across the REX input of any Australian access controller, or break the NC contact in series with a maglock loop for instant manual override. Common deployments include: Tecom Challenger / Inner Range Wire NO across the “Request to Exit” input on the TS1061, ELM or Inception module. Door event log entries identify the exit press automatically. Gallagher Command Centre Connect to the REX input on any Gallagher controller (Controller 6000/7000, T-series). Configure as Monitor Exit or Free Exit per door policy. Paxton Net2 & ICT Protege Standard NO closure to the Exit input on Net2 plus / Protege GX/WX. Supports timed and momentary exit modes. Standalone Maglock + Keypad Break the NC contact in line with the maglock 12/24 V DC supply for a wire-only manual override — no controller required. Technical Specifications Model WEL1911 (SECOR) Device Type Press-to-exit / Request-to-exit (REX) button Plate Material 304-grade Stainless Steel, flush mount LED Colour Green (Red and Blue variants available on request) Ingress Protection IP65 — dust-tight, protected against water jets Contact Configuration 1 × NO and 1 × NC, fully isolated dry contacts Maximum Switching Current 2 A @ 12 or 24 V DC Minimum Switching Current 5 mA Contact Resistance ≤50 mΩ Insulation Resistance >100 MΩ Electrical Life 50,000 cycles at rated load Mechanical Life 1,000,000 cycles LED Operating Voltage 12 V or 24 V DC Termination Flying leads (pre-terminated) Dimensions (Large Plate) 70 mm (W) × 115 mm (H) × 32 mm (D) Dimensions (Compact Plate) 30 mm (W) × 75 mm (H) × 32 mm (D) Mounting Flush wall-box or surface (compatible with standard AU electrical boxes) Warranty 1-Year manufacturer warranty Compliance RoHS, CE Country of Sale Australia only — supported by CCTV Guru Where to Use the WEL1911 Office & Tenancy Doors Flush-mounted next to glass entry doors, server rooms and reception areas. Stainless steel finish blends with modern fit-outs and brushed metal door hardware. Industrial & Warehouse IP65 rating handles dust, splash and wash-down zones. Heavy-duty switch withstands gloved-hand operation and high-frequency traffic. Retail & Hospitality Discreet green LED marks staff-only exits in stockrooms, kitchens and back-of-house corridors. Tamper-resistant when correctly recessed. Healthcare & Aged Care Smooth stainless plate is easy to clean and disinfect. Suitable for medical-grade clean zones and infection-control corridors. Wiring Quick Reference Standard REX Wiring (Access Controller) Connect the two NO flying leads across the controller’s REX / Exit input. Connect the LED+ and LED− leads to a 12 or 24 V DC source matching your installation voltage. Pressing the button momentarily closes the NO contact and grants exit on most Australian access control platforms. Direct Maglock Override (No Controller) Wire the NC contact in series with the 12/24 V DC supply to the maglock. Pressing the button opens the contact and de-energises the lock for the duration of the press — ideal for small-budget standalone maglock installations. Frequently Asked Questions Is the WEL1911 weatherproof for outdoor use? The IP65 rating protects against dust ingress and low-pressure water jets, making it suitable for sheltered outdoor exits, covered loading docks and entry porticos. For full open-weather exposure, install under an eave or canopy for maximum service life. What voltage does the LED need? The integrated LED runs on either 12 V or 24 V DC — just match it to your access control or lock power supply. No external resistor required. Will the WEL1911 work with my maglock? Yes. The fully isolated NO/NC contacts handle up to 2 A at 12/24 V DC, which covers nearly every Australian maglock and electric strike on the market. For fail-safe maglocks, wire the NC contact in series with the lock supply; for access controllers, use the NO contact across the REX input. Can I get this button with a red or blue LED? Yes. The WEL1911 is also available with red or blue LED variants on request. Contact CCTV Guru if you need a colour other than the standard green. What size wall box do I need? The large 70 mm × 115 mm plate fits a standard single-gang Australian wall box. The compact 30 mm × 75 mm plate suits door frames, mullions and narrow architrave applications. How long does the button last? Tested to 50,000 electrical cycles at full rated load and 1,000,000 mechanical cycles. Even at 200 presses a day, that’s well over a decade of dependable service. IP65 Rated 1-Year Warranty Australian Stock

Read more less

X2 Access Control · Press-to-Exit · 304 Stainless Steel X2 Mushroom Press-to-Exit Button — 304 Stainless Steel Request-to-Exit The X2 Mushroom Exit Button (X2-EXIT-001) is a mechanical press-to-exit switch mounted on an elegant, hard-wearing 304 stainless steel panel. Its large mushroom-style button makes it easy to hit by hand or elbow, giving a simple, reliable way to release a door from the secure side of any access-control installation. With a normally-open (N/O) SPST dry contact and screw-terminal wiring, it drops straight into virtually any access controller, electric strike, magnetic lock or door station request-to-exit (REX) input — no power supply of its own required. Rated to 500,000 operations, it's built to keep working at busy commercial and residential entrances for years. Mushroom Mechanical ButtonLarge, easy-press mushroom actuator for fast, dependable door release by hand or elbow. 304 Stainless Steel PanelCorrosion-resistant, vandal-tough 304 stainless faceplate that suits interior and sheltered entry points. Universal N/O Dry ContactNormally-open SPST contact (3A @ 36 VDC max) with screw terminals — wires to any access controller, strike, maglock or REX input. Long Mechanical LifeTested to 500,000 operations for reliable everyday use at high-traffic doors. Technical Specifications X2-EXIT-001 · Mushroom Exit Button Type Mechanical mushroom press-to-exit button Panel Material 304 stainless steel Contact Normally Open (N/O), SPST — NO / COM Rating 3A @ 36 VDC (max) Connection Screw terminal Mechanical Life 500,000 operations (tested) Dimensions 115 × 40 × 25 mm Operating Temperature 10°C to 55°C Operating Humidity 0% to 90% Downloads & Resources X2-EXIT-001 Datasheet Frequently Asked Questions What is a press-to-exit button?It's a manual switch that releases an electrically-locked door from the inside, letting people exit without a card or code. Does it need its own power?No. It's a passive dry-contact switch — it simply opens/closes the circuit for your access controller, strike or maglock. What can I wire it to?Any access controller, electric strike, magnetic lock or door station with a request-to-exit (REX) or push-button input. Is it suitable outdoors?The 304 stainless panel resists corrosion, but as a mechanical button it's best used indoors or in sheltered entryways. Australian Stock Fast AU-Wide Shipping AU Tech Support Order the X2 Mushroom Exit Button from CCTV Guru Order the X2-EXIT-001 Mushroom Press-to-Exit Button from CCTV Guru — a simple, reliable 304 stainless steel door-release switch for access control, intercom and electric-locking installations. Australian stock with fast AU-wide shipping and local support.

Read more less