Shop UniFi Protect alarm kits for wireless sensor installations and hardwired alarm upgrades. Choose the three-sensor starter bundle with CloudKey+ and PoE switch, or the AlarmHub hardware kit for supported wired alarm devices.
Kit contents vary. Check each listing for included sensors, console, power equipment and installation requirements.
Explore UniFi alarm sensors, gateways, sirens and supporting equipment.
UniFi Protect — 5-Sensor Starter Kit UniFi Protect Wireless Alarm Starter Kit – 5 Indoor Sensors Start an indoor motion-alert system with five USL-Motion sensors, a SuperLink Gateway, a PoE siren, CloudKey+ with 1TB SSD and a Lite 8 PoE switch. The sensors communicate wirelessly; the gateway, siren and console connect by Ethernet. Adopt the devices and configure your alarm rules and notifications in UniFi Protect. Sensors 5 × Indoor PIR Connectivity SuperLink Wireless Console CloudKey+ · 1TB SSD Power 52W PoE Switch What's Included Qty Model Purpose 5 USL-Motion Indoor wireless PIR motion sensors 1 USL-Gateway SuperLink sensor gateway 1 UP-Siren-PoE PoE siren with LED light ring 1 UCK-G2-SSD CloudKey+ console with 1TB SSD 1 USW-Lite-8-PoE 8-port switch with 4 PoE+ ports This is a CCTV Guru bundle of genuine Ubiquiti components. The sensors are five supplier-listed single units. Key Features Five Indoor Motion Sensors Cover five indoor positions with individual battery-powered PIR sensors connected through SuperLink. Siren & Light Alerts The included PoE siren adds audible and visual actions when the appropriate Protect alarm rules are configured. Console Included CloudKey+ with 1TB SSD runs UniFi Protect and UniFi Network for this installation. No separate console purchase is needed. PoE Power Included The Lite 8 PoE switch supplies power and data to the gateway, siren and CloudKey+ through Ethernet cabling. Technical Specifications Included sensors 5 × USL-Motion, supplied as five single units Wireless sensor link SuperLink proprietary radio PIR detection Horizontal up to 1.5m; vertical up to 6m with pet immunity Sensor power CR123A lithium battery; up to 6 years, depending on use SuperLink Gateway USL-Gateway; up to 96 SuperLink clients Wireless range Up to 2km line of sight; obstacles and RF conditions affect coverage Siren UP-Siren-PoE; PoE powered, LED light ring, IP56 Console & storage CloudKey+ UCK-G2-SSD with pre-installed 1TB SSD PoE switch USW-Lite-8-PoE; 8 Gigabit ports, including 4 PoE+ ports PoE capacity 52W total; up to 30W per PoE+ port Included wired-device load 18W maximum combined (gateway 3.4W + siren 5W + CloudKey+ 9.6W), excluding cable losses Management UniFi Protect for sensors and siren; UniFi Network for the switch Installation Indoor sensors, gateway and console; IP56 siren for suitable outdoor placement Cabling & backup power Ethernet cabling and UPS sold separately Downloads & Resources Motion Sensor SpecificationsGateway SpecificationsSiren SpecificationsCloudKey+ SpecificationsSwitch SpecificationsAlarm Manager Setup Best For New UniFi Protect Sensor Installations A hardware starting point for indoor motion sensing with a console and PoE switch included. Homes & Small Workplaces Monitor five indoor positions and configure the alert and siren rules that suit the site. Installation & System Requirements Connect the switch to your existing router/LAN. Ethernet cables for the gateway, CloudKey+ and siren are required and sold separately. Update the CloudKey+ and applications, adopt the switch in UniFi Network, then adopt the gateway, sensors and siren in UniFi Protect. Configure and test the triggers, device scopes, siren actions and notifications in Alarm Manager. This kit is supplied as hardware; installation and configuration are separate. Mount the sensors indoors. The published SuperLink range is up to 2km line of sight; check actual signal at every sensor position. For mains-outage operation, add a suitable PowerShield Defender PSD650 UPS backup for the switch, console and network equipment. UPS and cellular backup are not included. Add more USL-Motion sensors as required. Request an installation/configuration quote for site-specific assistance. Frequently Asked Questions What is included in this kit?Five USL-Motion single-unit sensors, one USL-Gateway, one UP-Siren-PoE, one UCK-G2-SSD CloudKey+ with 1TB SSD, and one USW-Lite-8-PoE switch. Do I need another UniFi console?The included CloudKey+ provides the console for UniFi Protect and UniFi Network. Connect the kit to your existing router and configure the applications. Is the whole kit wireless?The five motion sensors communicate wirelessly with the SuperLink Gateway. The gateway, siren and CloudKey+ use wired Ethernet and PoE connections. Does the siren sound automatically after installation?Devices must be adopted and the desired triggers, scopes, siren actions and notifications configured in UniFi Protect Alarm Manager. Test the rules after setup. Are network cables and installation included?Ethernet cabling, site installation and configuration services are not included. Request a separate installation/configuration quote. Does it include backup power or cellular backup?No. A UPS and cellular backup are not included. Battery-powered sensors do not keep the wired gateway, console, switch or siren running during a mains outage. Is this a professionally monitored alarm?No professional monitoring service is included. This kit provides devices for motion alerts and siren actions through configured UniFi Protect rules. Can I add more motion sensors?Yes. The gateway supports up to 96 SuperLink clients. Additional sensors are sold separately; placement, radio conditions and console capacity must be considered. Genuine Ubiquiti Australian Support Expandable System
$1,779.38 $1,699.00
UniFi Protect — 3-Sensor Expansion Kit UniFi Protect Wireless Alarm Expansion Kit – 3 Indoor Sensors Add three indoor USL-Motion sensors, a SuperLink Gateway and a PoE siren to an existing compatible UniFi Protect installation. A compatible Protect console and suitable PoE power are required and sold separately. The sensors communicate wirelessly; the gateway and siren connect by Ethernet. Adopt the devices and configure alarm rules before use. Sensors 3 × Indoor PIR Connectivity SuperLink Wireless Console Required Sold Separately PoE Required Existing Supply What's Included Qty Model Purpose 3 USL-Motion Indoor wireless PIR motion sensors 1 USL-Gateway SuperLink sensor gateway 1 UP-Siren-PoE PoE siren with LED light ring This is a CCTV Guru bundle of genuine Ubiquiti components. The sensors are three supplier-listed single units. Key Features Three Indoor SensorsMonitor three indoor locations using battery-powered USL-Motion PIR sensors. Gateway IncludedConnect the SuperLink sensors through the included USL-Gateway. PoE Siren IncludedConfigure audible and LED light actions in UniFi Protect Alarm Manager. Use Your Existing ConsoleThis expansion bundle suits a compatible Protect console and suitable PoE network. Console and switch are sold separately. Technical Specifications Included hardware 3 × USL-Motion; 1 × USL-Gateway; 1 × UP-Siren-PoE Sensor connectivity SuperLink proprietary radio PIR detection Horizontal up to 1.5m; vertical up to 6m with pet immunity Sensor power CR123A lithium battery; up to 6 years depending on use SuperLink Gateway Up to 96 SuperLink clients Wireless range Up to 2km line of sight; obstacles and RF conditions affect coverage Siren PoE powered; LED light ring; IP56 Gateway & siren maximum draw 8.4W combined, excluding cable losses Management UniFi Protect on an existing compatible console Required separately Compatible console, suitable PoE power, existing router/LAN and Ethernet cabling Installation Indoor motion sensors; siren supports suitable outdoor placement Not included Console, switch, cabling, UPS, cellular backup, professional monitoring or installation services Downloads & Resources Motion Sensor SpecificationsGateway SpecificationsSiren SpecificationsCloudKey+ SpecificationsSwitch SpecificationsAlarm Manager Setup Best For Existing Protect Installations Add motion sensors and siren alerts while reusing your compatible console and PoE equipment. Additional Indoor Coverage Extend an installation to three more indoor positions. Plan gateway placement for reliable radio coverage. Installation & System Requirements A compatible UniFi Protect console is required and not included. Check the console and application compatibility before ordering. Connect the gateway and siren to your router/LAN using suitable Ethernet cabling. The siren requires PoE; the gateway supports PoE or optional USB-C power. Power equipment and cables are sold separately. Update your console and applications, adopt the gateway, sensors and siren in UniFi Protect, then configure and test Alarm Manager rules. Mount motion sensors indoors and check the SuperLink signal at each position. UPS backup, cellular backup and professional monitoring are not included. Request a separate installation/configuration quote if needed. Frequently Asked Questions What is included?Three USL-Motion single-unit sensors, one USL-Gateway and one UP-Siren-PoE. A console and PoE switch are not included. Who is this expansion kit for?Customers with an existing compatible UniFi Protect console and suitable PoE power who want to add three indoor motion sensors and a siren. Do I need a SuperLink Gateway?Yes. This kit includes a USL-Gateway to connect the included SuperLink sensors. Customers who already have a suitable gateway may prefer to buy sensors and a siren individually. What console can I use?Use an existing compatible UniFi console running UniFi Protect. A CloudKey+ is one option and is sold separately. How are the devices powered?The sensors use CR123A lithium batteries. The siren requires PoE; the gateway supports PoE or optional USB-C power. Suitable network connections and power equipment are required. Is everything wireless?Only the motion sensors use the wireless SuperLink connection. The gateway and siren connect to your network through Ethernet. Are alarms ready to use out of the box?Adopt the devices, configure triggers, scopes, siren actions and notifications in UniFi Protect Alarm Manager, and test the installation. Are installation and backup power included?No. Ethernet cables, installation/configuration services, a UPS, cellular backup and professional monitoring are not included. Genuine Ubiquiti Australian Support Expandable System
$869.38 $829.00
UniFi Protect — 3-Sensor Starter Kit UniFi Protect Wireless Alarm Starter Kit – 3 Indoor Sensors Start an indoor motion-alert system with three USL-Motion sensors, a SuperLink Gateway, a PoE siren, CloudKey+ with 1TB SSD and a Lite 8 PoE switch. The sensors communicate wirelessly; the gateway, siren and console connect by Ethernet. Adopt the devices and configure your alarm rules and notifications in UniFi Protect. Sensors 3 × Indoor PIR Connectivity SuperLink Wireless Console CloudKey+ · 1TB SSD Power 52W PoE Switch What's Included Qty Model Purpose 3 USL-Motion Indoor wireless PIR motion sensors 1 USL-Gateway SuperLink sensor gateway 1 UP-Siren-PoE PoE siren with LED light ring 1 UCK-G2-SSD CloudKey+ console with 1TB SSD 1 USW-Lite-8-PoE 8-port switch with 4 PoE+ ports This is a CCTV Guru bundle of genuine Ubiquiti components. The sensors are three supplier-listed single units. Key Features Three Indoor Motion Sensors Cover three indoor positions with individual battery-powered PIR sensors connected through SuperLink. Siren & Light Alerts The included PoE siren adds audible and visual actions when the appropriate Protect alarm rules are configured. Console Included CloudKey+ with 1TB SSD runs UniFi Protect and UniFi Network for this installation. No separate console purchase is needed. PoE Power Included The Lite 8 PoE switch supplies power and data to the gateway, siren and CloudKey+ through Ethernet cabling. Technical Specifications Included sensors 3 × USL-Motion, supplied as three single units Wireless sensor link SuperLink proprietary radio PIR detection Horizontal up to 1.5m; vertical up to 6m with pet immunity Sensor power CR123A lithium battery; up to 6 years, depending on use SuperLink Gateway USL-Gateway; up to 96 SuperLink clients Wireless range Up to 2km line of sight; obstacles and RF conditions affect coverage Siren UP-Siren-PoE; PoE powered, LED light ring, IP56 Console & storage CloudKey+ UCK-G2-SSD with pre-installed 1TB SSD PoE switch USW-Lite-8-PoE; 8 Gigabit ports, including 4 PoE+ ports PoE capacity 52W total; up to 30W per PoE+ port Included wired-device load 18W maximum combined (gateway 3.4W + siren 5W + CloudKey+ 9.6W), excluding cable losses Management UniFi Protect for sensors and siren; UniFi Network for the switch Installation Indoor sensors, gateway and console; IP56 siren for suitable outdoor placement Cabling & backup power Ethernet cabling and UPS sold separately Downloads & Resources Motion Sensor SpecificationsGateway SpecificationsSiren SpecificationsCloudKey+ SpecificationsSwitch SpecificationsAlarm Manager Setup Best For New UniFi Protect Sensor Installations A hardware starting point for indoor motion sensing with a console and PoE switch included. Homes & Small Workplaces Monitor three indoor positions and configure the alert and siren rules that suit the site. Installation & System Requirements Connect the switch to your existing router/LAN. Ethernet cables for the gateway, CloudKey+ and siren are required and sold separately. Update the CloudKey+ and applications, adopt the switch in UniFi Network, then adopt the gateway, sensors and siren in UniFi Protect. Configure and test the triggers, device scopes, siren actions and notifications in Alarm Manager. This kit is supplied as hardware; installation and configuration are separate. Mount the sensors indoors. The published SuperLink range is up to 2km line of sight; check actual signal at every sensor position. For mains-outage operation, add a suitable PowerShield Defender PSD650 UPS backup for the switch, console and network equipment. UPS and cellular backup are not included. Add more USL-Motion sensors as required. Request an installation/configuration quote for site-specific assistance. Frequently Asked Questions What is included in this kit?Three USL-Motion single-unit sensors, one USL-Gateway, one UP-Siren-PoE, one UCK-G2-SSD CloudKey+ with 1TB SSD, and one USW-Lite-8-PoE switch. Do I need another UniFi console?The included CloudKey+ provides the console for UniFi Protect and UniFi Network. Connect the kit to your existing router and configure the applications. Is the whole kit wireless?The three motion sensors communicate wirelessly with the SuperLink Gateway. The gateway, siren and CloudKey+ use wired Ethernet and PoE connections. Does the siren sound automatically after installation?Devices must be adopted and the desired triggers, scopes, siren actions and notifications configured in UniFi Protect Alarm Manager. Test the rules after setup. Are network cables and installation included?Ethernet cabling, site installation and configuration services are not included. Request a separate installation/configuration quote. Does it include backup power or cellular backup?No. A UPS and cellular backup are not included. Battery-powered sensors do not keep the wired gateway, console, switch or siren running during a mains outage. Is this a professionally monitored alarm?No professional monitoring service is included. This kit provides devices for motion alerts and siren actions through configured UniFi Protect rules. Can I add more motion sensors?Yes. The gateway supports up to 96 SuperLink clients. Additional sensors are sold separately; placement, radio conditions and console capacity must be considered. Genuine Ubiquiti Australian Support Expandable System
$1,548.38 $1,499.00
Ubiquiti UniFi Protect · NDAA & TAA COMPLIANT Modernize Legacy Intrusion Security With Enterprise-Grade Intelligence The Ubiquiti UP-AlarmHub-Kit bridges traditional hardwired intrusion detection architectures directly into the unified UniFi Protect ecosystem. Designed for high-density commercial spaces, schools, offices, and industrial facilities, this robust 32-zone control hub allows organizations to retain existing wired door contacts, glass break detectors, and PIR sensors while migrating to a centralized, subscription-free management interface. Zone Capacity 32 Hardwired Zones Power Architecture PoE++ / 12V SLA Backup Platform Integration UniFi Protect Native Enclosure Build SGCC Steel Housing Seamless Ecosystem Synchronization and Resilient Power Distribution Engineered for maximum reliability, the UP-AlarmHub-Kit incorporates advanced auxiliary power capabilities, delivering dedicated 12V DC sensor power rails alongside programmable wet and dry output relays for complete automation control. Administrators can easily configure end-of-line (EOL) resistor values ranging from 1 to 5.6kΩ for optimal circuit health monitoring. Explore the full scope of system integration options through our Ubiquiti security hardware collection. Comprehensive Zone Configuration Features 32 individual alarm sensor input terminals plus 1 dedicated emergency trigger line, accommodating expansive layouts without requiring layout redesigns. Fail-Safe Battery Backup Support Designed with support for an optional 12V sealed lead-acid (SLA) backup battery and flexible PoE++ or PoE+++ power feeds to maintain critical intrusion monitoring during grid outages. Technical Specification Matrix Model UP-AlarmHub-Kit Input Terminals 32 Alarm sensor inputs, 1 Emergency input Power Method PoE++ / PoE+++ input, optional 12V SLA battery backup Networking Interface (1) 10/100 MbE RJ45 port Enclosure Material SGCC steel housing with polycarbonate cover Output Relays (2) Configurable Wet/Dry relays (Wet: 12V DC 1A, Dry: 30V DC 1A) Dimensions 379 x 355 x 105 mm (15 x 14 x 4.1 inches) NDAA Compliance Compliant Can I use my existing legacy hardwired window and door contacts? Yes. The UP-AlarmHub-Kit is explicitly engineered to interface with legacy hardwired sensors, supporting standard EOL resistor ranges from 1 to 5.6kΩ. What software version is required to adopt the alarm hub? The device requires UniFi Protect version 7.0.88 or later, along with matching mobile application updates for seamless mobile oversight. Does the system support backup power during unexpected blackouts? Yes, the unit features integrated charging support for a 12V sealed lead-acid (SLA) backup battery alongside PoE++ power inputs. Is this hardware package compliant with federal NDAA regulations? Yes, the UP-AlarmHub-Kit is fully NDAA compliant, satisfying deployment guidelines for government, corporate, and institutional projects. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery
$907.50
