UPS

Dahua · DH-PFM350 Series · Line-Interactive UPS · 600VA & 1500VA Dahua UPS Series Dahua DH-PFM350 Series Line-Interactive UPS for CCTV Protect your CCTV recorder, cameras and network equipment from voltage fluctuations and unexpected power outages with the Dahua DH-PFM350 Series. Choose the compact DH-PFM350-360 (600VA / 360W) for smaller systems, or the higher-capacity DH-PFM350-900 (1500VA / 900W) for larger camera installations and additional network equipment. Both models use line-interactive technology with automatic voltage regulation (AVR), a fast 2–6ms transfer time, cold-start capability and protection against overload, battery discharge and overcharging. Select your required model above before adding to cart. Two Capacity Options Choose 600VA / 360W for compact CCTV systems or 1500VA / 900W for larger installations. Automatic Voltage Regulation Boost-and-buck AVR helps stabilise fluctuating mains voltage without continuously using the battery. Fast Power Transfer A 2–6ms transfer time helps keep compatible recorders and network equipment operating during an outage. Australian Connectivity Australian plug and outlets make both models ready for local CCTV and networking installations. Choose the Right Model Model DH-PFM350-360 DH-PFM350-900 Capacity 600VA / 360W 1500VA / 900W Best suited to Small CCTV system or single NVR Larger NVR, cameras and network equipment Australian outlets 2 4 Battery 1 × 12V / 7Ah 2 × 12V / 9Ah Dimensions 279 × 101 × 142mm 320 × 130 × 182mm Weight 4.25kg 10.4kg Shared Specifications Brand Dahua Topology Line-interactive with AVR Plug type Australian Input voltage range 140–290V AC (or 81–145V AC) Output voltage 220 / 230 / 240V AC Transfer time 2–6ms Battery waveform Simulated sine wave Recharge time Approximately 4 hours to 90% Protection Overload, discharge and overcharge protection Noise level <40dB Warranty in Australia 3 years through CCTV Guru Australia Important: Actual backup runtime varies according to the connected load, battery condition and operating environment. Confirm the total wattage of your recorder, cameras, switches and other equipment before selecting a model. DH-PFM350-360 Datasheet DH-PFM350-900 Datasheet 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

PowerShield SafeGuard Powerboard-Style UPS Range The wall-mountable SafeGuard range provides compact line-interactive battery backup and surge protection for computers, CCTV, routers, modems and small-office equipment. Choose 750VA / 450W or 1000VA / 600W to suit your connected load. Model Capacity PSG750 750VA / 450W PSG1000 1000VA / 600W Key features Buck-and-boost automatic voltage regulation Compact powerboard-style, wall-mountable design Australian/New Zealand approved outlets USB monitoring with PowerShield NetGuard software Fax, modem and LAN surge suppression Cold start, overload and short-circuit protection User-replaceable sealed lead-acid battery Important: Backup runtime depends on the selected model and connected load.

Read more less

Hikvision DS-UPS-R/AU · Line-Interactive · AVR · Cold Start · 600 / 1000 / 2000 VA Hikvision DS-UPS-R/AU Range Hikvision DS-UPS-R/AU Series — Line-Interactive Back-Up UPS with AVR for CCTV & NVR Systems The Hikvision DS-UPS-R/AU range is a line of line-interactive tower UPS units designed to keep your CCTV recording running through mains dropouts, brownouts and dirty power. Available in 600 VA / 360 W (small residential NVRs), 1000 VA / 600 W (mainstream commercial NVR + camera load) and 2000 VA / 1200 W (large PoE switches, multi-HDD NVRs, larger sites). Built-in Automatic Voltage Regulation (AVR) corrects mains sag and surge without dropping to battery, so the batteries only discharge during actual outages — extending battery life. Cold start lets you power the NVR from battery even when there's no mains at all (useful for planned outages). Every unit is rated at 230 VAC 50 Hz, ships with Australian mains plug + AU-standard IEC outlets, and is backed by 3-year Australian warranty from CCTV Guru. Topology Line-Interactive · AVR Capacity Range 600 VA · 1000 VA · 2000 VA Input / Output 230 VAC 50 Hz · AU Plug + IEC Cold Start Power on from Battery · No Mains Needed Protection Surge · Overload · Short-Circuit · RJ11 Warranty 3-Year AU · Battery Replaceable 3-Year AU Warranty Fast AU Shipping Australian Tech Support Why a UPS Matters for a CCTV or NVR System Every CCTV recorder has a hard drive that's writing continuously. When the mains flicks off mid-write — a lightning strike, a substation dip, someone tripping the RCD — the HDD doesn't get to flush its cache before the power dies. The result is corrupted footage, index errors, or in the worst case a bricked RAID array. A UPS gives the NVR 5-15 minutes of clean battery power on an outage; the NVR shuts down cleanly (via USB signalling on models that support it), the HDD flushes properly, and there's no corruption when the power comes back. Line-interactive UPS units go one better — they use AVR (Automatic Voltage Regulation) to smooth out mains sag and surge without discharging the battery, so battery life is preserved for the times you actually need it. Line-Interactive Topology with AVR Automatic Voltage Regulation corrects ±25% mains sag and surge without switching to battery. Extends battery lifespan (typical AU regional grid has 30-50 minor sag events per week that would otherwise cycle a cheap standby UPS to battery). Cold Start Capability Start the load from battery even when there's no mains at all. Useful for planned outages (running a camera off-grid for a temporary site check) or bringing up the NVR after an extended power failure while the mains is still being restored. USB Auto-Shutdown Signalling Micro-USB connection to the NVR — when battery drops below the safe threshold, the UPS signals the NVR to shut down cleanly. Works with most Hikvision NVRs out of the box (may require enabling in NVR settings). Full Range of Protections Overload, short-circuit, over-discharge, over-charge, and mains surge protection — plus RJ11 telephone / network surge protection pass-through on all models to protect ADSL/NBN modems. Replaceable Battery Sealed lead-acid battery module accessible via bottom cover — replaceable at end of life (typical 3-5 years, faster in high ambient temp). Uses standard 12 V SLA batteries (600 VA: 12 V 4.5 Ah, 1000 VA: 12 V 9 Ah, 2000 VA: 2 × 12 V 9 Ah). Silent Fan-Free Operation (600 & 1000 VA) The 600 VA and 1000 VA models are fan-free — silent when running from mains. Suitable for reception desks, home offices, sleeping areas. The 2000 VA has a low-noise thermally-controlled fan that only runs at high load or on battery. Capacity Guide — Which VA Rating for Which NVR? UPS runtime is capped by the smaller of two things: the load in watts (must be under the UPS's watt rating) and the battery capacity. Below is a practical sizing guide based on Hikvision's own NVR power consumption. Sizing Guide · Which UPS for Which NVR 600 VA / 360 W · $101 4-8 channel M-Series NVRs with 1 HDD. Small residential / single-camera commercial. NVR draw ~40-60 W → ~15-20 min runtime. 1000 VA / 600 W · $149 (most popular) 8-16 channel NVRs with 1-2 HDD + a small PoE switch. Mainstream commercial. NVR + 8 cameras ~120-180 W → ~15-25 min runtime. 2000 VA / 1200 W · $269 16-32 channel NVRs with 2-4 HDD, larger PoE-heavy sites, DeepinMind AI NVRs. Also fits sites with modem + NVR + monitor + PoE switch. ~15-30 min runtime at typical load. Rule of thumb: add up the wattage of everything you want protected (NVR + PoE switch + modem + a small monitor if used), then pick the UPS that's at least 1.5× that number in watts. Sizing headroom = longer runtime + longer battery life. Full Specifications Comparison DS-UPS-R/AU Range · Specification Comparison Spec 600 VA · 360 W · $101  |  1000 VA · 600 W · $149  |  2000 VA · 1200 W · $269 SKU DS-UPS600-R/AU · DS-UPS1000-R/AU · DS-UPS2000-R/AU Topology Line-Interactive with AVR (all three) Capacity 600 VA / 360 W · 1000 VA / 600 W · 2000 VA / 1200 W Input Voltage 230 VAC (140-300 VAC operating range) 50 Hz (all three) Output Voltage 230 VAC ±10% (battery mode) · simulated sine wave Transfer Time Typically ≤ 6 ms (all three) Battery 12 V 4.5 Ah SLA · 12 V 9 Ah SLA · 2× 12 V 9 Ah SLA Recharge Time ≤ 8 hours to 90% (all three) Output Sockets 2× IEC (AU) · 3× IEC (AU) · 4× IEC (AU) + optional 15 A AU socket on 2000 VA Communication USB (auto-shutdown) · RJ11 surge pass-through (all three) Cold Start Yes (all three) Cooling Passive (fan-free) · Passive (fan-free) · Low-noise thermal fan Efficiency (AC mode) ≥ 92% (all three) Operating Temperature 0 °C to +40 °C · humidity ≤90 % (non-condensing) Dimensions (approx.) 90×140×195 mm · 100×145×280 mm · 145×195×340 mm Weight ~4.5 kg · ~7.5 kg · ~14 kg Certifications RCM (AU) · CE · RoHS Warranty 3-Year Australian Warranty (all three) Frequently Asked Questions What's the difference between VA and Watts?VA (volt-amps) is the apparent power rating; Watts is the real power the UPS can deliver. For CCTV/NVR loads, the wattage number is what actually matters — that's what you compare against the actual draw of your equipment. VA is what UPS marketing leads with because it's a bigger number. How long will the UPS run my NVR for?Depends on load. A typical 8-camera Hikvision NVR draws ~120-180 W. At half load, the 1000 VA runs 15-25 min, the 2000 VA runs 25-40 min, and the 600 VA runs 5-10 min. Enough for a clean shutdown; not enough to keep recording through a multi-hour outage. For that, you want a larger UPS or a solar / genset solution. Can it auto-shutdown my NVR?Yes — connect the USB cable from the UPS to the NVR's USB port and enable UPS shutdown in the NVR settings. When the battery drops to the safe threshold, the UPS signals the NVR to save-and-shutdown. Works with most Hikvision NVRs; check the NVR's user manual for the exact menu path. Does it protect my ADSL/NBN modem too?Yes — plug the modem into one of the UPS's IEC outlets to power-protect it, AND run your ADSL/phone line through the RJ11 surge pass-through ports on the back to protect against surges coming down the phone line (lightning strikes on the copper network often destroy modems). How often do I need to replace the battery?Typical SLA battery life is 3-5 years in Australian ambient conditions. Batteries in hot spaces (comms cabinets in summer) may only last 2-3 years. The UPS beeps when the battery fails its self-test — that's your signal. Replacement batteries are standard 12 V SLA sizes available from any battery supplier. What's a "sine wave" vs "simulated sine wave" output?Pure sine wave outputs are true smooth AC — required by some sensitive equipment (medical, some audio gear). Simulated sine wave (also called modified sine wave) is what the DS-UPS-R/AU uses — perfectly fine for NVRs, PoE switches, modems, monitors, computers and 99% of home / commercial IT gear. Order the Hikvision DS-UPS-R/AU from CCTV Guru Australian stock across the entire DS-UPS-R/AU range — 600 VA, 1000 VA and 2000 VA. Select your capacity from the dropdown above. Free tech advice on sizing for your specific NVR + camera load — contact us with your parts list and we'll spec the right UPS for your project. Multi-unit and installer pricing available for site rollouts and body-corp maintenance contracts. Request a free quote or contact our Australian team.

Read more less

The Defender Rackmount expands the successful Defender Range by building the popular features into a Rack Mount UPS. At 230mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets.This versatile UPS uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage, protecting your valuable equipment from power line disturbances whilst also incorporating the best surge protection in its class. Compact FootprintUser Replaceable BatteriesSilent Operation - No FansCompatible with all wall mounted racksExtra IEC and Australian OutletsAll Metal EnclosureUnpackaged:438L mm x 230W mm x 86H mm

Read more less

PowerShield VoltGuard 1500VA / 750W AVR - 750 Watt Voltage Stabliser. No internal batteries The PowerShield VoltGuard 1500VA / 750W AVR is a reliable voltage stabiliser designed to protect sensitive electronics by maintaining a stable output voltage. It features a wide input voltage range and rapid response to fluctuations, ensuring consistent power delivery. Equipped with surge and spike suppression, it safeguards devices from voltage spikes. Additional protections include over-voltage, under-voltage, over-temperature, and overload safeguards. Its compact design includes Australian outlet sockets, making it a practical and efficient solution for voltage regulation without the need for internal batteries. Features Very wide input voltage range Excellent output voltage stability Includes surge and spike suppression Extremely fast response Provides over-voltage & under-voltage protection Provides over-temperature and overload protection Stylish enclosure with Australian outlet sockets The PowerShield VoltGuard AVR (Automatic Voltage Regulator) will automatically maintain a safe voltage level to protect sensitive electronics. This cost effective, compact device will provide a constantly regulated output voltage, ensuring that your sensitive electronic equipment is always receiving voltage within an acceptable range. The VoltGuard also has over voltage and under voltage protection included as standard, which will turn off the supply to your equipment when the utility voltage moves out of the safe range. The VoltGuard’s compact design offers three power outlets together with a voltage regulator, ideal for protecting voltage sensitive equipment such as home office equipment. It is also designed for use with home electronics equipment such as televisions, stereos and home theatres as well as modems and telephone equipment.The VoltGuard will provide stable power to connected devices by boosting and bucking the input power. It provides best surge protection in its class, to protect against transients.

Read more less

PowerShield Defender Line-Interactive UPS Range Protect computers, CCTV recorders, networking equipment and other electronics from outages, surges and unstable mains power. The Defender range combines automatic voltage regulation, Australian outlets, an informative LCD, silent fanless operation and user-replaceable batteries. Select the capacity that best matches your connected equipment and required runtime. Model Capacity PSD650 650VA / 390W PSD1200 1200VA / 720W PSD1600 1600VA / 960W PSD2000 2000VA / 1200W Key features Line-interactive UPS with boost-and-buck AVR LCD operating-status display Australian UPS and surge-protected outlets User-replaceable batteries Cold start and automatic restart USB communication with PowerShield NetGuard software Important: Runtime varies with load, battery condition and operating environment. Confirm your equipment’s combined wattage before selecting a model.

Read more less

CyberPower Office Rackmount OR600ERM1U-AU Line-interactive UPS - 600 VA/360 W - Rack-mountable - AVR - 8 Hour Recharge - 4 Minute Stand-by - 230 V AC Input - 230 V AC Output - 6 x IEC 60320 C13 - Single Phase - Serial Port CyberPower OR600ERM1U-AU Line-Interactive UPS offers Simulated Sine Wave output power for office system devices including PCs, workstations, networking devices, and peripherals. It's typically integrated in the back office and server room environment to ensure a reliable backup power supply during power failures.The UPS has a multifunction LCD display which offers real-time information, including input and output voltage levels, load and battery levels, battery runtime, overload warning, and a silent mode. With the network ports on the UPS, it prevents network devices from being subjected to sudden power surges caused by lightning, thereby avoiding potential system damage. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption. Features Line-interactive UPS Topology Simulated Sine Wave Output Overload Protection Surge and Spike Protection Phone/Fax/Modem/DSL/Network Protection USB Connectivity Port SNMP/HTTP Remote Management Capability (Optional) Energy Saving Technology Automatic Voltage Regulation (AVR) Hot-swappable Batteries

Read more less

The PowerShield DC Mini designed to provide emerg power backup to all kinds of powered equipment including routers, modems, set top boxes, VOIP phone systems, surveillance equipment, alarm systems and many critical telecommunications devices. DC Mini can economically provide hours of operation during power failure.FeaturesBuilt in user replaceableLi-ion batteryAuto start when plugged inMulti-colour indicatorEmbedded Micro-controllerManual power off switch portAC INPUTVoltage Range90 V AC ~ 265 V ACFrequency50 Hz or 60 HzSurge Protection125 J @ 4500 ADC OUTPUTVoltage12 V DC ± 5 %Maximum Power18 W (1.5 A)BATTERYBattery TypeLithium-ion BatteryVoltage3.7 V DCCapacity2600 mAhTypical Charging Time3 hours recover to 90% capacityPROTECTIONBatteryDeep Discharge, Over-Charge and Short Circuit Protection.Input / OutputFuse for Short Circuit and Overload ProtectionINDICATORSMulti-colour LED DisplayFull BatteryGreen - SolidBattery ChargingGreen - Slow flashingBattery DischargingGreen - Quick flashingFaultRed - SolidPHYSICALDimensions (D x W x H)78 x 42 x 74mmNet Weight280 g

Read more less

APC Back-UPS · 1600VA / 900W · 4 AU Outlets APC Back-UPS · 1600VA BX1600MI-AZ Back-UPS with AVR — Australian Stock & APC 2-Year Warranty The APC Back-UPS BX1600MI-AZ delivers 1600VA / 900W of battery backup and surge protection through 4 Australian AS/NZS 3112 outlets — no adaptors or IEC leads required. Built for home offices, small business PCs, NBN modems, routers and NVRs, it uses Automatic Voltage Regulation (AVR) to smooth out brownouts and over-voltage without touching the battery, and a clear LED status display to show utility and battery condition at a glance. Capacity 1600VA / 900W Outlets 4× Australian Regulation AVR Built-In Surge Rating 273 Joules Why choose the APC Back-UPS BX1600MI-AZ Genuine Australian outlets Four AS/NZS 3112 sockets let you plug in local gear directly — no IEC leads, travel adaptors or double-adaptors cluttering your setup. Automatic Voltage Regulation AVR corrects sustained low and high mains voltage back to a usable range without switching to battery, preserving battery life and riding through brownouts. Cold-start capability Power up connected equipment from the battery even when mains power is completely unavailable — useful during extended outages. Clear LED status display At-a-glance indicators show on-line and on-battery states plus fault conditions, so you always know how the unit and your mains supply are behaving. Typical Runtime Full Load (900 W) Approx. 1 minute Half Load (450 W) Approx. 6.5 minutes Light Load (modem/router only) Up to 240 minutes maximum Runtimes are measured with new, fully charged batteries at a balanced resistive load. Sizing to roughly half the rated wattage gives you a far more useful runtime buffer. Technical Specifications Output Output Power Capacity 1600VA / 900W Output Voltage 230V (nominal) Topology Line Interactive Waveform Type Stepped approximation to a sine wave Output Frequency 50/60 Hz ±1 Hz, synced to mains Output Connections 4× Australian AS/NZS 3112 Transfer Time 6 ms typical, 10 ms maximum Voltage Regulation Automatic Voltage Regulation (AVR) Input Nominal Input Voltage 230V Input Voltage Range 140 – 300V Input Frequency 50/60 Hz ±5 Hz (auto-sensing) Input Connection Australian AS/NZS 3112 plug Input Cable Length 1.22 m Battery & Runtime Battery Type Sealed lead-acid, maintenance-free Battery Voltage 24V Battery Capacity 168 VAh (136 VAh runtime) Replacement Battery Cartridge APC RBC176 Typical Recharge Time 8 hours Typical Battery Life 3 – 5 years Cold-Start Capable Yes Management & Protection Control Panel LED status display (on line / on battery) Audible Alarm On battery & low battery warning Surge Energy Rating 273 Joules Overload Protection Circuit breaker Physical & Environmental Form Factor Tower (not rack-mountable) Dimensions (H × W × D) 190 × 140 × 390 mm Net Weight 10.3 kg Colour Black Operating Temperature 0 – 40°C Operating Humidity 0 – 95% (non-condensing) Acoustic Noise 40 dBA IP Rating IP20 Certifications CE, CB, RCM · RoHS compliant Warranty 2-Year APC repair or replace (Australia) Best Suited For Home Office & PCs Keeps desktops, monitors and peripherals alive long enough to save work and shut down safely. NBN, Modems & Routers Light loads run for hours, keeping internet and phone connectivity up through short outages. CCTV & NVR Setups Protects recorders and PoE switches from brownouts and surges that cause corrupted footage. Charge the UPS for a full 8 hours before relying on it for backup runtime. Never plug laser printers, heaters or other high-draw appliances into a UPS outlet. Size your load to around half the 900W rating for a genuinely useful runtime buffer. Replace the internal battery every 3–5 years using the APC RBC176 cartridge. Documentation & Downloads BX1600MI-AZ Datasheet APC Back-UPS Quick Start Guide APC Back-UPS User Manual Frequently Asked Questions Does it have Australian power outlets?Yes. The BX1600MI-AZ has 4 Australian AS/NZS 3112 outlets, so local plugs connect directly without IEC leads or adaptors. How long will it run my equipment?Around 1 minute at the full 900W load and about 6.5 minutes at 450W. Light loads such as a modem and router can run for up to several hours. Is the output a pure sine wave?No. This model produces a stepped approximation to a sine wave. If your equipment uses an active PFC power supply, choose a pure sine wave model such as the APC Smart-UPS range instead. Does it connect to a computer for automatic shutdown?No. The BX1600MI-AZ has no USB or serial data port. If you need PowerChute software and automated shutdown, step up to an APC Smart-UPS model. What is Automatic Voltage Regulation (AVR)?AVR corrects sustained low or high mains voltage back to a safe range without discharging the battery, which protects your gear and extends battery life. What is the replacement battery?It uses the APC RBC176 replacement battery cartridge, with a typical service life of 3 to 5 years. Can I mount it in a rack?No. This is a tower-form UPS and is not rack-mountable. For rack installations, consider a 2U rackmount model such as the APC Smart-UPS C. How long does it take to charge?Typical recharge time is 8 hours. Charge it fully before depending on it for backup runtime. 2-Year APC Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

APC Back-UPS Pro • 1200VA / 720W Premium sine wave battery backup for NVRs, computers and business networks The APC Back-UPS Pro BR1200SI is a premium 1200VA / 720W line-interactive UPS designed to help protect essential equipment from power outages, voltage fluctuations and damaging surges. It is a smart choice for CCTV recorders, routers, switches, desktop computers, NAS devices and small business workstations that need cleaner, more reliable backup power. With sine wave output, Automatic Voltage Regulation, an easy-read LCD display, USB Type-A and Type-C charging ports, and 8 IEC C13 outlets, the BR1200SI gives installers and end users a professional-grade power protection solution in a compact tower design. Capacity 1200VA / 720W Output Sine Wave Outlets 8 x IEC C13 Battery User Replaceable Why choose the APC BR1200SI? Sine wave power for sensitive electronics The BR1200SI provides sine wave output, making it suitable for modern computers, network equipment, storage devices and security systems that benefit from cleaner backup power during outages. Ideal for CCTV and network continuity Keep your NVR, modem, router, PoE switch or workstation running through short power interruptions, helping reduce downtime and protecting important footage or data. Automatic Voltage Regulation Built-in AVR helps stabilise incoming voltage without constantly switching to battery, helping preserve battery life while protecting connected equipment from unstable mains power. LCD status display The front LCD gives quick visibility of UPS status, load, battery condition and alerts, making it easier for installers and end users to understand what is happening at a glance. 8 IEC C13 outlets Includes 6 IEC C13 battery backup plus surge protection outlets and 2 IEC C13 surge-only outlets, allowing essential equipment and non-critical peripherals to be connected correctly. User-replaceable battery Designed for long-term serviceability with a user-replaceable battery system. The compatible replacement battery is APCRBC161. Recommended use cases CCTV recorders and security systems Helps keep NVRs, DVRs and security network equipment online during brief outages so your system can continue recording when power is unstable. Routers, modems and network switches A practical UPS for keeping internet and local network equipment running during short interruptions in homes, offices and small businesses. Desktop PCs and workstations Protects computers from sudden shutdowns and gives users time to safely save work and shut down connected equipment. NAS and storage devices Suitable for small storage devices where controlled shutdown and clean backup power are important for data protection. Key specifications Model BR1200SI Product range APC Back-UPS Pro UPS type Line interactive Rated power 1200VA / 720W Main input voltage 230V Output voltage 230V Output waveform Sine wave Output frequency 50/60Hz +/- 1Hz sync to mains Input connection IEC 60320 C13 Output outlets 6 x IEC 60320 C13 battery backup + surge protection, 2 x IEC 60320 C13 surge protection only USB charging USB Type-A + USB Type-C ports Display LCD interface with audible alarms Battery type Lead-acid battery Battery voltage 24V Battery capacity 9.0Ah Battery recharge time 16 hours Expected battery life 3–5 years Replacement battery APCRBC161 Runtime reference Up to 1 hour at 100W load Operating temperature 0°C to 40°C Dimensions 26cm H x 10cm W x 36.8cm D Net weight 11.7kg Included in box User manual, USB cable Certifications A-Tick, C-Tick, CE, EAC, RCM, TISI Downloads Download Datasheet Official APC videos Why APC sine wave UPS matters Connecting or replacing the battery Frequently asked questions Is the APC BR1200SI suitable for CCTV systems? Yes. It is a strong option for NVRs, routers, modems and small network devices where backup power and surge protection are important. Runtime depends on the total connected load. How many outlets does it have? The BR1200SI has 8 IEC C13 outlets in total: 6 outlets with battery backup and surge protection, plus 2 surge-only outlets for non-critical equipment. Does it output sine wave power? Yes. The BR1200SI provides sine wave output, making it suitable for sensitive electronics, computers, networking devices and security equipment. Can the battery be replaced? Yes. The UPS supports a user-replaceable battery. The compatible replacement battery cartridge is APCRBC161. How long will it run my equipment? Runtime depends on the connected load. As a reference, Schneider Electric lists runtime at 100W as approximately 1 hour. Is this suitable for printers? Printers and other high-draw peripherals should generally be connected to surge-only outlets, not battery backup outlets, unless the manufacturer and load sizing confirm suitability. Built for reliable Australian power protection Whether you are protecting a CCTV recorder, a small office network or a home workstation, the APC BR1200SI offers a clean balance of performance, serviceability and trusted APC power protection. For security installations, it is especially useful where keeping the recorder, router and internet connection online during short outages is part of the system design. Australian Support Local CCTV Guru guidance before and after purchase. Installer Friendly Practical UPS choice for CCTV, network and small business systems. Trusted Brand APC by Schneider Electric power protection. Fast Dispatch Order online from CCTV Guru Australia.

Read more less

Features: True double-conversion Output power factor 0.9 User-friendly and electronic easy-shift LCD display Rack or Tower design Advanced ECO mode for energy saving Generator compatible Programmable power management outlets Emergency Power Off function (EPO) Hot swappable battery design Available in 1000, 2000 and 3000 VA models Ideal for medium density power protection can be Extra large charger

Read more less

Protect critical CCTV, networking and IT equipment with the PowerShield Centurion true online double-conversion UPS. Choose the capacity that matches your load while keeping the same dependable Centurion tower platform.Available models Model Capacity SKU Centurion 1000 1000VA PSCE1000 Centurion 2000 2000VA PSCE2000 Key features True online double-conversion protection Consistent, conditioned power for sensitive equipment Tower format for offices, control rooms and equipment areas Selectable capacity from one product page Select your required capacity above. Pricing, availability and specifications update with the chosen model.

Read more less

Powershield BB8 Ext Battery Suits PSCRT2000

Read more less

Telescopic Rail Mounting Kit not included with UPS

Read more less

NINJA SLIMLINE UPS LiFePO4 batteries up to 10 years protection Silent Operation Ultra-think design for space limited deployment Ideal for electrical boards, switchboards, intelligent homes, light-boards, menu-boards

Read more less

PowerShield Commander Pure Sine Wave Tower UPS The Commander tower range provides line-interactive pure sine wave backup for sensitive equipment including CCTV systems, servers, computers, gates and telecommunications hardware. Select 1100VA / 990W or 2000VA / 1800W to match your load. Model Capacity PSCM1100 1100VA / 990W PSCM2000 2000VA / 1800W Key features Pure sine wave output Smart AVR with buck and boost regulation Real-time battery backup display Generator compatible Telephone, modem and LAN surge protection Fast two-stage charging Important: Confirm the combined wattage and desired runtime before selecting a capacity.

Read more less

PowerShield Commander RT Pure Sine Wave Rack/Tower UPS The Commander RT range provides line-interactive pure sine wave protection for networking, telecommunications and mission-critical equipment in rack or tower installations. Model Capacity PSCRT1100 1100VA / 990W PSCRT2000 2000VA / 1800W PSCRT3000 3000VA / 2700W Key features Pure sine wave output Convertible rack/tower design Boost-and-buck AVR Programmable power-management outlets ECO mode and Emergency Power Off Hot-swappable batteries Expandable battery support on compatible models Rails and external battery modules may be sold separately. Confirm load, plug and installation requirements before ordering.

Read more less

The PowerShield Centurion RT LiFePO4 combines true online double-conversion protection with lithium iron phosphate battery technology for longer battery life, faster recharge, lower weight and high power density. It is designed for sensitive networks, servers, telecommunications, CCTV and industrial applications.Available models Capacity SKU 1000VA PSLCERT1000 2000VA PSLCERT2000 3000VA PSLCERT3000 Key features True online double-conversion topology LiFePO4 lithium iron phosphate batteries Rack or tower installation 0.9 output power factor Advanced ECO mode Generator compatible Programmable outlets and Emergency Power Off Hot-swappable battery design USB HID communication Select a capacity above to view the corresponding price and stock availability.

Read more less

The PowerShield Centurion RT delivers true online double-conversion protection in a flexible rack or tower design. Select the capacity required for CCTV infrastructure, servers, networking and other mission-critical equipment.Available models Capacity Output SKU 1000VA 900W PSCERT1000 2000VA 1800W PSCERT2000 3000VA 2700W PSCERT3000 Key features True online double-conversion topology 0.9 output power factor Rack or tower installation Advanced ECO mode with efficiency up to 98% Generator compatible Programmable power-management outlets Emergency Power Off and hot-swappable battery design Select a capacity above to view its price and availability.

Read more less