8 Channel · 8 PoE Ports · 4K HDMI · H.265+ 8ch · 8-PoE 4K NVR HiLook NVR-108MH-C/8P 8-Channel 8-PoE NVR — Australian Stock & 3-Year Warranty The HiLook NVR-108MH-C/8P is an 8-channel 4K network video recorder with 8 built-in PoE ports, letting you wire up to eight IP cameras with a single Cat-cable each — no separate PoE switch or power supplies required. It records up to 8 MP (4K) per channel, accepts up to 80 Mbps of incoming bandwidth, and uses H.265+ compression to cut storage use by up to 75% versus older H.264 systems. Simultaneous HDMI (up to 4K) and VGA outputs drive a TV and a second monitor at once, while a single SATA bay accepts a surveillance HDD up to 8 TB for weeks of continuous recording. View live and recorded footage anywhere via the Hik-Connect app or iVMS-4200 desktop client. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 8 Channels PoE Ports 8 × PoE (≤75 W) Plug-and-Play 8-Camera 4K Recording 8 Built-In PoE Ports Connect up to eight IP cameras directly to the recorder with one network cable each — the NVR supplies both data and power (≤75 W total), so there's no extra switch or power brick to buy or wire. True 4K Output The HDMI port drives a 4K (3840 × 2160) display, and HDMI plus VGA run simultaneously so you can watch live and review playback on two screens at once. H.265+ Efficiency Smart H.265+ compression cuts storage and bandwidth use by up to 75%, letting a single 8 TB drive hold far more footage than an equivalent H.264 recorder. Smart VCA Events Supports camera-side analytics such as line crossing, intrusion, motion detection and ANPR (when paired with compatible HiLook/Hikvision cameras) for smarter, event-based searching. Technical Specifications Recording & Channels Model / SKU NVR-108MH-C/8P IP Video Input 8-ch, up to 8 MP (4K) resolution Incoming Bandwidth 80 Mbps Outgoing Bandwidth 80 Mbps Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability 1-ch@8 MP (30 fps) / 5-ch@1080p (30 fps) Synchronous Playback 8-ch Compression H.265+/H.265/H.264+/H.264 Smart Analytics Camera-side VCA: motion, line crossing, intrusion, ANPR, people counting Network & PoE PoE Ports 8 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget ≤ 75 W Network Interface 1 × RJ-45 10/100/1000 Mbps self-adaptive Remote Connections Up to 64 Protocols TCP/IP, DHCP, IPv4/IPv6, DNS, DDNS, NTP, RTSP, HTTPS, iSCSI, UPnP, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 1 × SATA Max HDD Capacity Up to 8 TB per drive HDMI Output 1-ch, up to 4K (3840 × 2160) / 4096 × 2160 @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA simultaneous output USB 2 × USB 2.0 Power Supply 48 VDC, 1.88 A Dimensions (W×D×H) 265 × 225 × 48 mm · approx. 1 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation NVR-108MH-C/8P Datasheet HiLook NVR Quick Start Guide Frequently Asked Questions How many cameras can it run?Up to 8 IP cameras, each connected directly to one of the 8 built-in PoE ports. What's the total PoE budget?The 8 PoE ports share a total budget of up to 75 W, enough for eight standard HiLook bullet, turret or dome cameras. What HDD size can I fit?One SATA hard drive up to 8 TB. A surveillance-grade drive is recommended; an HDD is not usually included unless stated on this page. Does it support AcuSense AI?No — the C-Series records camera-side VCA events (motion, line crossing, intrusion, ANPR) but does not run on-board AI. For NVR-side AI choose the K-Series (e.g. NVR-108MH-K/8P). What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. Does it need a separate switch?No. The 8 PoE ports supply data and power to each camera over a single cable, so no extra switch or power supplies are needed. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

8 Channel · 8 PoE Ports · K-Series AI · 4K HDMI 8ch · 8-PoE AI 4K NVR HiLook NVR-108MH-K/8P K-Series AI 4K NVR — Australian Stock & 3-Year Warranty The HiLook NVR-108MH-K/8P is an 8-channel 4K K-Series network video recorder with 8 built-in PoE ports and on-board AI. Its Motion Detection 2.0 engine classifies humans and vehicles across all channels to cut false alarms from rain, foliage and animals, while built-in facial recognition can capture and compare faces against a library — even when your cameras have no AI of their own. Records up to 8 MP (4K) per channel with up to 80 Mbps incoming bandwidth and efficient H.265+ compression. Simultaneous HDMI (up to 4K) and VGA outputs drive two screens, and a single SATA bay takes a surveillance HDD up to 10 TB. View live and recorded footage anywhere via Hik-Connect or iVMS-4200. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 8 Channels PoE Ports 8 × PoE (≤75 W) K-Series AI on Every Camera Motion Detection 2.0 On-board AI sorts genuine human and vehicle events from nuisance triggers like swaying trees, rain and passing animals across all 8 channels — so your phone only buzzes when it matters, even with non-AI cameras. Facial Recognition Capture and compare faces against a face-picture library (up to 16 libraries) directly on the recorder, with face search to jump straight to the clips that matter. 8 Built-In PoE Ports Connect up to eight IP cameras with one cable each — the NVR supplies data and power (≤75 W total), so there's no separate switch or power supplies to buy or wire. 4K Output & H.265+ Drive a 4K display over HDMI (plus a second VGA screen) and rely on H.265+ compression to slash storage and bandwidth use by up to 75%. Technical Specifications Recording, Channels & AI Model / SKU NVR-108MH-K/8P IP Video Input 8-ch, up to 8 MP (4K) resolution Incoming Bandwidth 80 Mbps Outgoing Bandwidth 80 Mbps AI / Smart Analytics Motion Detection 2.0 (human/vehicle, 8-ch), facial detection & comparison Facial Recognition 1-ch face capture / 4-ch face-picture comparison; up to 16 libraries, 20,000 faces Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability AI off: 2-ch@8 MP / 4-ch@4 MP / 8-ch@1080p · AI on: 1-ch@8 MP / 3-ch@4 MP / 6-ch@1080p Synchronous Playback 8-ch Compression H.265+/H.265/H.264+/H.264 Network & PoE PoE Ports 8 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget ≤ 75 W Network Interface 1 × RJ-45 10/100/1000 Mbps self-adaptive Remote Connections Up to 128 Protocols TCP/IP, DHCP, IPv4/IPv6, DNS, DDNS, NTP, RTSP, HTTPS, iSCSI, UPnP, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 1 × SATA Max HDD Capacity Up to 10 TB per drive HDMI Output 1-ch, up to 4K (3840 × 2160) @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA independent output USB 1 × USB 2.0 front, 1 × USB 2.0 rear Power Supply 48 VDC, 1.875 A Dimensions (W×D×H) 320 × 240 × 48 mm · approx. 1 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation NVR-108MH-K/8P Datasheet HiLook K-Series NVR Flyer HiLook NVR Quick Start Guide Frequently Asked Questions How many cameras can it run?Up to 8 IP cameras, each connected directly to one of the 8 built-in PoE ports. Does it support AcuSense / AI?Yes. As a K-Series recorder it runs on-board AI — Motion Detection 2.0 (human/vehicle filtering across 8 channels) plus facial detection and comparison — so you get smart alerts even with non-AI cameras. What's the total PoE budget?The 8 PoE ports share a total budget of up to 75 W, enough for eight standard HiLook cameras. What HDD size can I fit?One SATA hard drive up to 10 TB. A surveillance-grade drive is recommended; an HDD is not usually included unless stated on this page. What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Can I use facial recognition and Motion Detection 2.0 together?No — facial recognition and Motion Detection 2.0 cannot be enabled at the same time; choose the mode that suits each install. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

4 Channel · 4 PoE Ports · 4K HDMI · H.265+ 4ch · 4-PoE 4K NVR HiLook NVR-104MH-C/4P 4-Channel 4-PoE NVR — Australian Stock & 3-Year Warranty The HiLook NVR-104MH-C/4P is a compact 4-channel 4K network video recorder with 4 built-in PoE ports, so you simply run a single Cat-cable to each camera — no separate PoE switch or power supplies required. It records up to 8 MP (4K) per channel, takes up to 40 Mbps of incoming bandwidth, and uses H.265+ compression to shrink storage use by up to 75% versus older H.264 systems. Simultaneous HDMI (up to 4K) and VGA outputs let you drive a TV and a second monitor at once, while a single SATA bay accepts a surveillance HDD up to 8 TB for weeks of continuous recording. View live and recorded footage from anywhere via the Hik-Connect app or iVMS-4200 desktop client. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 4 Channels PoE Ports 4 × PoE (≤50 W) Plug-and-Play 4K Recording 4 Built-In PoE Ports Connect up to four IP cameras directly to the recorder with one network cable each — the NVR supplies both data and power (≤50 W total), so there's no extra switch or power brick to buy or wire. True 4K Output The HDMI port drives a 4K (3840 × 2160) display, and HDMI plus VGA run simultaneously so you can watch live and review playback on two screens at once. H.265+ Efficiency Smart H.265+ compression cuts storage and bandwidth use by up to 75%, letting a single 8 TB drive hold far more footage than an equivalent H.264 recorder. Smart VCA Events Supports camera-side analytics such as line crossing, intrusion, motion detection and ANPR (when paired with compatible HiLook/Hikvision cameras) for smarter, event-based searching. Technical Specifications Recording & Channels Model / SKU NVR-104MH-C/4P IP Video Input 4-ch, up to 8 MP (4K) resolution Incoming Bandwidth 40 Mbps Outgoing Bandwidth 80 Mbps Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability 1-ch@8 MP (30 fps) / 5-ch@1080p (30 fps) Synchronous Playback 4-ch Compression H.265+/H.265/H.264+/H.264 Smart Analytics Camera-side VCA: motion, line crossing, intrusion, ANPR, people counting Network & PoE PoE Ports 4 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget ≤ 50 W Network Interface 1 × RJ-45 10/100 Mbps self-adaptive Remote Connections Up to 16 Protocols TCP/IP, DHCP, IPv4/IPv6, DNS, DDNS, NTP, RTSP, HTTPS, iSCSI, UPnP, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 1 × SATA Max HDD Capacity Up to 8 TB per drive HDMI Output 1-ch, up to 4K (3840 × 2160) / 4096 × 2160 @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA simultaneous output USB 2 × USB 2.0 Power Supply 48 VDC, 1.35 A Dimensions (W×D×H) 265 × 225 × 48 mm · approx. 1 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation NVR-104MH-C/4P Datasheet HiLook NVR Quick Start Guide Frequently Asked Questions How many cameras can it run?Up to 4 IP cameras, each connected directly to one of the 4 built-in PoE ports. What's the total PoE budget?The 4 PoE ports share a total budget of up to 50 W, which comfortably powers four standard HiLook bullet, turret or dome cameras. What HDD size can I fit?One SATA hard drive up to 8 TB. A surveillance-grade drive is recommended; an HDD is not usually included unless stated on this page. Does it support AcuSense AI?No — the C-Series records camera-side VCA events (motion, line crossing, intrusion, ANPR) but does not run on-board AI. For NVR-side AI choose the K-Series (e.g. NVR-104MH-K/4P). What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. Does it need a separate switch?No. The 4 PoE ports supply data and power to each camera over a single cable, so no extra switch or power supplies are needed. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

16 Channel · 16 PoE Ports · 2 HDD Bays · 4K HDMI 16ch · 16-PoE 4K NVR HiLook NVR-216MH-C/16P 16-Channel 16-PoE 4K NVR — Australian Stock & 3-Year Warranty The HiLook NVR-216MH-C/16P is a 16-channel 4K network video recorder built for larger sites, with 16 built-in PoE ports so you can wire up to sixteen IP cameras over a single Cat-cable each — no separate PoE switch required. It records up to 8 MP (4K) per channel, accepts up to 160 Mbps of incoming bandwidth, and uses H.265+ compression to cut storage use by up to 75%. Two SATA bays take surveillance HDDs up to 8 TB each (16 TB total) for long retention across many cameras, while simultaneous HDMI (up to 4K) and VGA outputs drive two screens. Built-in Motion Detection 2.0 filters human and vehicle events to reduce false alarms. View live and recorded footage anywhere via Hik-Connect or iVMS-4200. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 16 Channels PoE Ports 16 × PoE (150 W) Big-Site Recording, Simply Wired 16 Built-In PoE Ports Power and connect up to sixteen IP cameras directly from the recorder — one cable each, no separate switch or power supplies. A generous 150 W PoE budget supports a full bank of cameras. Dual HDD Bays Two SATA bays hold up to 8 TB each (16 TB total), so a 16-camera system can keep weeks of continuous 4K footage without constant overwriting. 160 Mbps & 4K Output Up to 160 Mbps incoming bandwidth handles sixteen high-resolution streams, while HDMI drives a 4K display alongside a second VGA screen. Motion Detection 2.0 On-board AI classifies human and vehicle events to cut nuisance alerts from rain, foliage and animals — smarter notifications and faster searching. Technical Specifications Recording & Channels Model / SKU NVR-216MH-C/16P IP Video Input 16-ch, up to 8 MP (4K) resolution Incoming Bandwidth 160 Mbps Outgoing Bandwidth 80 Mbps Smart Analytics Motion Detection 2.0 — 4-ch human/vehicle analysis Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability 2-ch@8 MP / 4-ch@4 MP / 8-ch@1080p (30 fps) Synchronous Playback 16-ch Compression H.265+/H.265/H.264+/H.264 Network & PoE PoE Ports 16 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget 150 W Network Interface 1 × RJ-45 10/100/1000 Mbps self-adaptive Remote Connections Up to 32 Protocols TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 2 × SATA Max HDD Capacity Up to 8 TB per drive (16 TB total) HDMI Output 1-ch, up to 4K (3840 × 2160) @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA simultaneous output USB 2 × USB 2.0 Power Supply AC 100–240 V, ~190 W Chassis / Dimensions 1U · 384 × 315 × 52 mm · approx. 3.7 kg Warranty 3-Year Australian Warranty Downloads & Documentation NVR-216MH-C/16P Datasheet Frequently Asked Questions How many cameras can it run?Up to 16 IP cameras, each connected directly to one of the 16 built-in PoE ports. What's the total PoE budget?The 16 PoE ports share a total budget of 150 W, enough to power a full bank of standard HiLook cameras. What HDD size can I fit?Two SATA hard drives up to 8 TB each — 16 TB total. Surveillance-grade drives are recommended; HDDs are not usually included unless stated on this page. Does it support AcuSense AI?It runs Motion Detection 2.0 with 4-channel human/vehicle analysis to filter false alarms, but it is a C-Series recorder without full NVR-side AI. For deeper AI choose a K-Series model. What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. Does it need a separate switch?No. The 16 PoE ports supply data and power over a single cable, so no extra switch or power supplies are needed. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

8 Channel · 8 PoE Ports · 80 Mbps · Motion 2.0 8ch · 8-PoE 4K NVR HiLook NVR-108MH-C/8P(D) 8-Channel 8-PoE NVR — Australian Stock & 3-Year Warranty The HiLook NVR-108MH-C/8P(D) is an 8-channel 4K network video recorder with 8 built-in PoE ports, so you can wire up to eight IP cameras with a single Cat-cable each — no separate PoE switch or power supplies required. It records up to 8 MP (4K) per channel, accepts up to 80 Mbps of incoming bandwidth, and uses H.265+ compression to cut storage use by up to 75%. This (D) revision adds 4-channel Motion Detection 2.0, classifying human and vehicle events to reduce false alarms. Simultaneous HDMI (up to 4K) and VGA outputs drive two screens, and a single SATA bay accepts a surveillance HDD up to 8 TB. View live and recorded footage anywhere via Hik-Connect or iVMS-4200. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 8 Channels PoE Ports 8 × PoE (≤75 W) Plug-and-Play 8-Camera 4K Recording 8 Built-In PoE Ports Connect up to eight IP cameras directly to the recorder with one network cable each — the NVR supplies both data and power (≤75 W total), so there's no extra switch or power brick to buy or wire. Motion Detection 2.0 Four channels of on-board human/vehicle analysis filter out nuisance triggers from rain, foliage and animals, so notifications and searches focus on what matters. True 4K Output The HDMI port drives a 4K (3840 × 2160) display, and HDMI plus VGA run simultaneously so you can watch live and review playback on two screens at once. H.265+ Efficiency Smart H.265+ compression cuts storage and bandwidth use by up to 75%, letting a single 8 TB drive hold far more footage than an equivalent H.264 recorder. Technical Specifications Recording & Channels Model / SKU NVR-108MH-C/8P(D) IP Video Input 8-ch, up to 8 MP (4K) resolution Incoming Bandwidth 80 Mbps Outgoing Bandwidth 80 Mbps Smart Analytics Motion Detection 2.0 — 4-ch human/vehicle analysis; camera-side VCA Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability 1-ch@8 MP / 3-ch@4 MP / 6-ch@1080p (30 fps) Synchronous Playback 8-ch Compression H.265+/H.265/H.264+/H.264 Network & PoE PoE Ports 8 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget ≤ 75 W Network Interface 1 × RJ-45 10/100 Mbps self-adaptive Remote Connections Up to 32 Protocols TCP/IP, DHCP, IPv4/IPv6, DNS, DDNS, NTP, RTSP, HTTPS, iSCSI, UPnP, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 1 × SATA Max HDD Capacity Up to 8 TB per drive HDMI Output 1-ch, up to 4K (3840 × 2160) / 4096 × 2160 @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA simultaneous output USB 2 × USB 2.0 Power Supply 48 VDC, 1.88 A Dimensions (W×D×H) 265 × 225 × 48 mm · approx. 1 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation NVR-108MH-C/8P(D) Datasheet HiLook NVR User Manual Regulatory & Safety Information Frequently Asked Questions How many cameras can it run?Up to 8 IP cameras, each connected directly to one of the 8 built-in PoE ports. What's the total PoE budget?The 8 PoE ports share a total budget of up to 75 W, enough for eight standard HiLook bullet, turret or dome cameras. What HDD size can I fit?One SATA hard drive up to 8 TB. A surveillance-grade drive is recommended; an HDD is not usually included unless stated on this page. Does it support AcuSense / AI?This (D) revision adds 4-channel Motion Detection 2.0 (human/vehicle filtering) on the NVR, plus camera-side VCA. For full NVR-side AI such as facial recognition, choose the K-Series. What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. Does it need a separate switch?No. The 8 PoE ports supply data and power to each camera over a single cable, so no extra switch or power supplies are needed. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

4 Channel · 4 PoE Ports · K-Series AI · 4K HDMI 4ch · 4-PoE AI 4K NVR HiLook NVR-104MH-K/4P K-Series AI 4K NVR — Australian Stock & 3-Year Warranty The HiLook NVR-104MH-K/4P is a 4-channel 4K K-Series network video recorder with 4 built-in PoE ports and on-board AI. Its Motion Detection 2.0 engine classifies humans and vehicles so you can filter out false alarms from rain, foliage and animals, while built-in facial recognition can capture and compare faces against a library — even when your cameras don't have AI of their own. Records up to 8 MP (4K) per channel with up to 40 Mbps incoming bandwidth and efficient H.265+ compression. Simultaneous HDMI (up to 4K) and VGA outputs drive two screens, and a single SATA bay takes a surveillance HDD up to 10 TB. View live and recorded footage anywhere via Hik-Connect or iVMS-4200. Backed by genuine Australian stock and a 3-year warranty. Camera Channels 4 Channels PoE Ports 4 × PoE (≤50 W) K-Series AI on Every Camera Motion Detection 2.0 On-board AI sorts genuine human and vehicle events from nuisance triggers like swaying trees, rain and passing animals — so your phone only buzzes when it matters, even with non-AI cameras. Facial Recognition Capture and compare faces against a face-picture library directly on the recorder, with face search to jump straight to the clips that matter. 4 Built-In PoE Ports Connect up to four IP cameras with one cable each — the NVR supplies data and power (≤50 W total), so there's no separate switch or power supplies to buy or wire. 4K Output & H.265+ Drive a 4K display over HDMI (plus a second VGA screen) and rely on H.265+ compression to slash storage and bandwidth use by up to 75%. Technical Specifications Recording, Channels & AI Model / SKU NVR-104MH-K/4P IP Video Input 4-ch, up to 8 MP (4K) resolution Incoming Bandwidth 40 Mbps Outgoing Bandwidth 80 Mbps AI / Smart Analytics Motion Detection 2.0 (human/vehicle), facial detection & comparison Facial Recognition 1-ch face capture / 4-ch face-picture comparison Recording Resolution 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Decoding Capability Up to 4-ch@8 MP / 16-ch@1080p (AI off) Synchronous Playback 4-ch Compression H.265+/H.265/H.264+/H.264 Network & PoE PoE Ports 4 × RJ-45 10/100 Mbps, IEEE 802.3af/at Total PoE Budget ≤ 50 W Network Interface 1 × RJ-45 10/100 Mbps self-adaptive Protocols TCP/IP, DHCP, IPv4/IPv6, DNS, DDNS, NTP, RTSP, HTTPS, iSCSI, UPnP, ONVIF-compatible Client / App Hik-Connect, iVMS-4200, HiLookVision Storage, Output & General HDD Bays 1 × SATA Max HDD Capacity Up to 10 TB per drive HDMI Output 1-ch, up to 4K (3840 × 2160) @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Output Mode HDMI/VGA simultaneous output USB 2 × USB 2.0 Power Supply 48 VDC Dimensions (W×D×H) 265 × 225 × 48 mm · approx. 1 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation NVR-104MH-K/4P Datasheet Frequently Asked Questions How many cameras can it run?Up to 4 IP cameras, each connected directly to one of the 4 built-in PoE ports. Does it support AcuSense / AI?Yes. As a K-Series recorder it runs on-board AI — Motion Detection 2.0 (human/vehicle filtering) plus facial detection and comparison — so you get smart alerts even with non-AI cameras. What's the total PoE budget?The 4 PoE ports share a total budget of up to 50 W, enough for four standard HiLook cameras. What HDD size can I fit?One SATA hard drive up to 10 TB. A surveillance-grade drive is recommended; an HDD is not usually included unless stated on this page. What's the maximum recording resolution?Up to 8 MP (4K) per channel, with H.265+ compression to keep file sizes down. Which cameras are compatible?Any HiLook or Hikvision IP camera, plus ONVIF-compatible third-party cameras. Does it need a separate switch?No. The 4 PoE ports supply data and power over a single cable, so no extra switch or power supplies are needed. How do I view it remotely?Through the free Hik-Connect mobile app or the iVMS-4200 desktop client for live view, playback and notifications. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

32-Channel · 16-PoE · 4K/8MP · 2-Bay Pro NVR 32CH · 16-PoE · 4K NVR HiLook NVR-232MH-K/16P 32-Channel 16-PoE NVR — Australian Stock & 3-Year Warranty The HiLook NVR-232MH-K/16P is a 32-channel, 1U 4K network video recorder with 16 built-in PoE ports, giving you true plug-and-play installs where each IP camera takes power and data over a single Cat cable. It records and displays up to 8 MP (4K) resolution, accepts up to 256 Mbps incoming bandwidth for 32 cameras, and uses efficient H.265+ compression to dramatically cut storage and bandwidth versus older codecs. Dual SATA bays handle large drives for long retention, while a 4K HDMI output plus VGA drives a sharp local monitor. It speaks ONVIF for broad camera compatibility and connects to the Hik-Connect app and iVMS-4200 desktop client for remote viewing from anywhere. Backed by genuine Australian stock and a 3-year warranty. Capacity 32 Channels · 16 PoE Live View 4K HDMI Output Plug-and-Play 4K Recording at Scale 16 Built-In PoE Ports Power and connect up to 16 IP cameras directly from the recorder — no separate PoE switch needed. Expand to 32 channels total by adding cameras on your network for larger sites. True 4K / 8 MP Records and plays back footage at up to 8 MP (4K) resolution and outputs a crisp 4K image over HDMI, so every detail is captured and viewed in full clarity. Efficient H.265+ Smart H.265+ compression slashes file sizes and network load versus H.264, letting you store far more days of footage on the same drives. Dual HDD & ONVIF Two SATA bays give plenty of room for long retention, while ONVIF support lets you mix in compatible third-party IP cameras alongside HiLook and Hikvision. Technical Specifications Channels & Recording Model / SKU NVR-232MH-K/16P IP Camera Inputs Up to 32 channels Built-in PoE Ports 16 × RJ-45 (IEEE 802.3af/at), plug & play Max. Recording Resolution 8 MP (4K) Video Compression H.265+ / H.265 / H.264+ / H.264 Incoming Bandwidth Up to 256 Mbps Decoding Capability 2-ch @ 12 MP / 3-ch @ 8 MP / 6-ch @ 4 MP / 12-ch @ 1080p Storage, Output & Network HDD Bays 2 × SATA (HDD not included) Video Output HDMI up to 4K + VGA Network Interface RJ-45 10/100/1000 Mbps Protocols / Integration ONVIF, ISAPI, SDK; TCP/IP, DDNS, NTP, HTTPS, NFS, iSCSI, UPnP Client / App Hik-Connect, iVMS-4200 General Series HiLook Pro K-Series Power Supply 100–240 VAC, 50/60 Hz Form Factor 1U metal chassis Warranty 3-Year Australian Warranty Downloads & Documentation NVR-232MH-K/16P Datasheet HiLook NVR Quick Start Guide HiLook NVR User Manual Frequently Asked Questions How many cameras can this NVR record?Up to 32 IP camera channels in total. Sixteen connect directly to the built-in PoE ports, and the remaining channels can be added over your network. Do the PoE ports power my cameras?Yes. The 16 built-in PoE ports (IEEE 802.3af/at) deliver power and data to each camera over a single cable, so no separate PoE switch is required for those cameras. Does it support 4K?Yes — it records and plays back at up to 8 MP (4K) and outputs a 4K image over HDMI to your monitor. How much bandwidth does it handle?Up to 256 Mbps incoming bandwidth, comfortably enough to feed a full 32-channel system of high-resolution cameras. How many hard drives can I fit?It has 2 × SATA bays. Hard drives are sold separately — fit large-capacity surveillance-grade drives for longer retention. Is a hard drive included?No, the HDD is not included by default. Add a surveillance-rated drive sized to your camera count and retention needs. Will it work with non-HiLook cameras?Yes, it supports ONVIF, so compatible third-party IP cameras can be added alongside HiLook and Hikvision models. How do I view footage remotely?Use the free Hik-Connect mobile app or the iVMS-4200 desktop client to watch live and recorded video from anywhere. What compression does it use?H.265+ and H.265 (plus H.264+/H.264), which significantly reduce storage and bandwidth compared with older codecs. Is it covered by an Australian warranty?Yes — it ships as genuine Australian stock with a 3-year Australian warranty and local tech support. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

16-Channel · 16-PoE · 4K · 2-Bay Pro NVR 16CH · 16-PoE · 4K NVR HiLook NVR-216MH-K/16P 16-Channel 16-PoE 4K NVR — Australian Stock & 3-Year Warranty The HiLook NVR-216MH-K/16P is a 16-channel, 1U 4K network video recorder with 16 built-in PoE ports — power and data run to every camera over a single Cat cable for genuinely clean, plug-and-play installs with no separate PoE switch. It supports H.265+ compression, up to 160 Mbps incoming bandwidth, and dual display outputs (HDMI up to 4K plus VGA) for sharp local monitoring. Two SATA bays (up to 16 TB per drive) deliver ample storage for long retention, while up to 128 remote connections and ONVIF Profile S/G compatibility keep it flexible across mixed camera fleets. Connect to the Hik-Connect app and iVMS-4200 desktop client for remote viewing anywhere. Backed by genuine Australian stock and a 3-year warranty. Capacity 16 Channels · 16 PoE Live View 4K HDMI Output Clean 16-Camera Installs in 4K 16 Built-In PoE Ports Power and connect up to 16 IP cameras directly from the recorder (IEEE 802.3af/at), with a PoE budget of up to 200 W — fewer boxes, fewer points of failure, faster installs. 4K Local Display HDMI output up to 4K (3840 × 2160 @ 30 Hz) plus a VGA output drives a crisp main monitor, with independent dual-output mode for two screens. Dual HDD Storage Two SATA bays accept drives up to 16 TB each (up to 32 TB total, drive dependent) for flexible, long-retention recording. Efficient & Compatible H.265+ compression reduces storage and bandwidth, while ONVIF Profile S/G support and up to 128 remote connections keep the system open and accessible. Technical Specifications Channels & Recording Model / SKU NVR-216MH-K/16P IP Camera Inputs 16 channels Built-in PoE Ports 16 × RJ-45 (10/100 Mbps), IEEE 802.3af/at, PoE budget up to 200 W Max. Recording Resolution 8 MP (4K) Video Compression H.265+ / H.265 / H.264+ / H.264 Incoming / Outgoing Bandwidth 160 Mbps / 160 Mbps Decoding Capability 2-ch @ 12 MP / 4-ch @ 8 MP / 8-ch @ 4 MP / 16-ch @ 1080p Playback Up to 16-ch synchronous Storage, Output & Network HDD Bays 2 × SATA, up to 16 TB per HDD (HDD not included) HDMI Output 1-ch, up to 4K (3840 × 2160) @ 30 Hz VGA Output 1-ch, up to 1920 × 1080 @ 60 Hz Network Interface 1 × RJ-45 10/100/1000 Mbps Protocols / Integration ONVIF (Profile S/G), SDK, ISAPI; RTSP, HTTPS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP Remote Connections Up to 128 Client / App Hik-Connect, iVMS-4200 General Series HiLook Pro K-Series Power Supply 100–240 VAC, 50/60 Hz Consumption ≤ 15 W (without HDD, PoE off) Operating Temperature −10 °C to 55 °C Dimensions (W × D × H) 385 × 315 × 52 mm Weight ≤ 3 kg (without HDD) Warranty 3-Year Australian Warranty Downloads & Documentation HiLook NVR Quick Start Guide HiLook NVR User Manual Frequently Asked Questions Does this NVR power the cameras directly?Yes. It has 16 built-in PoE ports (IEEE 802.3af/at) with a PoE budget up to 200 W, so power and data run to each camera over a single cable — no separate PoE switch needed. How many cameras can it record?Up to 16 IP cameras across its 16 channels. Does it support 4K output to a monitor?Yes — HDMI outputs up to 4K (3840 × 2160 @ 30 Hz), and there is also a VGA output for a second screen. How much storage can I add?Two SATA bays accept drives up to 16 TB each (up to 32 TB total, drive dependent). Is a hard drive included?No, the HDD is not included by default. Fit a surveillance-rated drive sized to your camera count and retention needs. Will it work with non-HiLook cameras?Yes — it supports ONVIF Profile S/G, so compatible third-party IP cameras can be added alongside HiLook and Hikvision models. How many people can connect remotely?Up to 128 remote connections, viewed via the Hik-Connect app or iVMS-4200 desktop client. What compression does it use?H.265+ and H.265 (plus H.264+/H.264), which cut storage and bandwidth versus older codecs. What's the power draw?≤ 15 W without a hard drive and with PoE off; total draw rises with connected PoE cameras. Is it covered by an Australian warranty?Yes — it ships as genuine Australian stock with a 3-year Australian warranty and local tech support. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less