Range Extenders

Extend Your Wi-Fi 6 Coverage to Every Corner of Your HomeThe TP-Link RE605X is an AX1800 Wi-Fi 6 range extender that boosts your existing wireless network to eliminate dead zones and weak signal areas. With combined speeds of up to 1800Mbps across dual bands, a built-in Gigabit Ethernet port, and support for MU-MIMO and OFDMA, it delivers faster, more reliable Wi-Fi to more devices — even in busy households. Compatible with any Wi-Fi router or access point.Key Features Wi-Fi 6 (802.11ax) — next-generation wireless technology for faster speeds and better performance in congested environments AX1800 Dual-Band Speeds — 574Mbps on 2.4GHz and 1201Mbps on 5GHz for a combined 1800Mbps 1× Gigabit Ethernet Port — connect a wired device such as a smart TV, gaming console, or NVR directly to the extender MU-MIMO and OFDMA — simultaneously serves multiple devices with less congestion and lower latency 2× External Antennas — improved signal strength and coverage compared to internal antenna designs Works with Any Router — compatible with all Wi-Fi routers and access points regardless of brand WPS One-Touch Setup — connect to your existing network in seconds with a single button press Access Point Mode — use as a standalone access point when connected via Ethernet for wired-to-wireless coverage Typical Use Cases Eliminating Wi-Fi dead zones in bedrooms, garages, or back gardens Extending Wi-Fi coverage in multi-storey homes where the router signal doesn’t reach Adding a wired Ethernet connection in a room without a wall socket via the Gigabit port Boosting Wi-Fi for smart home devices, IP cameras, or streaming devices in weak signal areas Temporary Wi-Fi extension for renovations, events, or pop-up setups Technical Specifications Specification Detail Model RE605X Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a — 5GHz; 802.11ax/n/b/g — 2.4GHz) Wi-Fi Speed AX1800: 574Mbps (2.4GHz) + 1201Mbps (5GHz) Antennas 2× External (2×2 MU-MIMO) Ethernet Port 1× Gigabit (10/100/1000Mbps) Operating Modes Range Extender, Access Point Security WPA/WPA2/WPA3, WPA2-Enterprise Buttons WPS, Reset Power Consumption 10W Dimensions (W×D×H) 73.7 × 45.7 × 124.5 mm Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the RE605X work with my existing router? Yes. The RE605X is compatible with any Wi-Fi router or access point regardless of brand. It connects to your existing network wirelessly and rebroadcasts the signal with the same or a new network name. Do I need a Wi-Fi 6 router to use the RE605X? No. The RE605X works with any Wi-Fi router, including older Wi-Fi 5 (AC) and Wi-Fi 4 (N) routers. However, to take full advantage of Wi-Fi 6 speeds and features, a Wi-Fi 6 router is recommended. Can I use the RE605X as an access point? Yes. When connected to a router or switch via the Gigabit Ethernet port, the RE605X can operate in Access Point mode, providing wireless coverage from a wired connection. Where is the best place to position the RE605X? For best results, place the RE605X halfway between your router and the area with weak signal — ideally where it can still receive a strong signal from the router (at least 2–3 bars). Avoid placing it behind large appliances or thick concrete walls. Does the RE605X support WPA3 security? Yes. The RE605X supports WPA3 encryption, providing the latest wireless security standard for compatible devices.

Read more less

TP-Link RE450 – AC1750 Wi-Fi Range Extender with Gigabit Port The TP-Link RE450 eliminates Wi-Fi dead zones by connecting to your existing router wirelessly and rebroadcasting a stronger signal to areas it can’t reach on its own. With AC1750 dual band speeds (450Mbps on 2.4GHz + 1300Mbps on 5GHz), three adjustable external antennas, and a Gigabit Ethernet port for wired device bridging, it’s a capable range extender for homes, offices, and small commercial premises across Australia. Works with any Wi-Fi router or wireless access point. Key Features AC1750 Dual Band Wi-Fi: 450Mbps on 2.4GHz and 1300Mbps on 5GHz for a combined 1750Mbps — three times faster than standard 802.11n extenders. 3 Adjustable External Antennas: Directional antenna positioning allows you to optimise coverage for your specific layout, reducing interference and improving signal reliability. Gigabit Ethernet Port: Converts the extender into a wireless bridge — connect a smart TV, gaming console, NVR, Blu-ray player, or desktop PC to your Wi-Fi network via a wired Gigabit connection. Intelligent Signal Light: LED indicator shows signal strength from the host router to help you find the optimal placement location for maximum coverage. Works with Any Router: Compatible with any 802.11a/b/g/n/ac Wi-Fi router or wireless access point regardless of brand. Australian Plug Type: Supplied with AU-standard plug for direct compatibility with Australian power outlets. RE Button: One-press WPS-style pairing with compatible routers for quick setup without accessing the web interface. Dual Band Flexibility: Extend either the 2.4GHz or 5GHz band, or both simultaneously, depending on your network requirements. Ideal Use Cases Extending Wi-Fi coverage to rooms, floors, or areas of a home or office where the router signal is weak or absent. Bridging a wired device (smart TV, NVR, gaming console) to a Wi-Fi network via the Gigabit Ethernet port without running new cable to the router. Improving Wi-Fi coverage in multi-storey homes, large open-plan offices, or buildings with thick walls. Providing reliable wireless connectivity to IP cameras or access control devices in areas with marginal router signal. Temporary Wi-Fi extension for short-term installations or rental properties where infrastructure changes are not possible. Technical Specifications Specification Detail Model RE450 Wi-Fi Standard IEEE 802.11ac/n/g/b Wi-Fi Speed (5GHz) Up to 1300Mbps (802.11ac) Wi-Fi Speed (2.4GHz) Up to 450Mbps (802.11n) Combined Speed AC1750 (1300 + 450Mbps) Antennas 3 × External Adjustable Ethernet Port 1 × 10/100/1000Mbps (Gigabit RJ45) Plug Type AU (Australian standard) Power Consumption 9W (max) Buttons RE (Range Extender), Reset, LED, Power Router Compatibility Works with any 802.11a/b/g/n/ac Wi-Fi router Dimensions 163 × 76.4 × 66.5 mm Weight 0.34kg SKU RE450 Barcode (EAN) 6935364095994 What’s in the Box 1 × RE450 AC1750 Wi-Fi Range Extender 1 × RJ45 Ethernet Cable Quick Installation Guide Frequently Asked Questions Will the RE450 work with my existing router? Yes. The RE450 is compatible with any 802.11a/b/g/n/ac Wi-Fi router or wireless access point, regardless of brand. It connects to your existing network wirelessly and rebroadcasts the signal. How do I find the best location to place the RE450? The built-in intelligent signal LED indicates the signal strength received from your router. Place the RE450 where the LED shows a strong signal — typically halfway between your router and the dead zone — for the best balance of coverage extension and speed. Can I connect a wired device to the RE450? Yes. The Gigabit Ethernet port allows you to connect a wired device — such as a smart TV, NVR, gaming console, or desktop PC — to your Wi-Fi network at Gigabit speeds, effectively turning the RE450 into a wireless bridge. Does the RE450 create a separate Wi-Fi network name (SSID)? By default, the RE450 can extend your existing network using the same SSID, allowing devices to roam between the router and extender seamlessly. It can also be configured with a separate SSID if preferred. Will using a range extender reduce my Wi-Fi speed? Range extenders that use a single radio to receive and retransmit on the same band can reduce throughput by up to 50%. The RE450 uses dual band Wi-Fi, which allows it to communicate with the router on one band while serving clients on the other, reducing this speed penalty for dual-band capable devices. Is the RE450 suitable for extending Wi-Fi to IP cameras? Yes. The RE450 can extend Wi-Fi coverage to areas where IP cameras are installed but router signal is insufficient. For cameras requiring a wired connection, the Gigabit Ethernet port can also be used to bridge a single camera or a small switch to the extended network. Does it plug directly into a wall socket? Yes. The RE450 plugs directly into a standard Australian power outlet (AU plug type included) — no separate power adapter or cable is required for power.

Read more less

Genuine Ubiquiti IR Extender — NDAA Compliant Extend Your Night Vision Further The Ubiquiti UVC-G4-IRExtender is a long-range infrared LED accessory that boosts the night-vision reach of your UniFi Protect G4 Bullet Camera by up to 25 m (82 ft). Powered and controlled directly by the camera, it adds extra IR coverage with no separate power supply and no extra wiring. Weather resistant for outdoor installs, it is a simple, plug-and-play upgrade for darker sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Extended IR Range Boosts infrared coverage up to 25 m (82 ft) for clearer, longer-reaching night vision. Camera-Powered Powered and controlled directly by the UniFi camera — no extra power supply or wiring required. Weather Resistant Built to perform reliably in outdoor installations alongside your G4 Bullet camera. Plug-and-Play A simple long-range IR LED add-on for the UniFi Protect G4 Bullet and UniFi Video Camera G3. Technical Specifications Model UVC-G4-IRExtender Category IR Range Extender IR Range Up to 25 m (82 ft) Power Method Powered & controlled by camera Weather Resistance Yes — outdoor rated Compatible With UniFi Protect G4 Bullet (UVC-G4-BULLET), UniFi Video Camera G3 (UVC-G3) Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

TP-Link RE205 AC750 Wi-Fi Range Extender – Dual-Band 300Mbps + 433Mbps Overview The TP-Link RE205 is a compact plug-in Wi-Fi range extender that eliminates dead zones and extends your existing wireless network to hard-to-reach areas of your home or office. Delivering combined speeds of up to 750Mbps across dual-band 2.4GHz (300Mbps) and 5GHz (433Mbps), it works with any Wi-Fi router or wireless access point. An intelligent signal light guides you to the optimal placement location for the best possible coverage — no guesswork required. Key Features AC750 Dual-Band Wi-Fi – Combined speeds of up to 750Mbps across 2.4GHz (300Mbps) and 5GHz (433Mbps) bands for flexible, stable wireless extension. Eliminates Wi-Fi Dead Zones – Extends your existing router’s signal to bedrooms, garages, backyards, and other areas with weak or no coverage. Intelligent Signal Light – Built-in LED signal indicator shows the strength of the connection to your router, helping you find the optimal placement location for maximum coverage. Universal Router Compatibility – Works with any Wi-Fi router or wireless access point regardless of brand; no special configuration required. Compact Plug-In Design – Plugs directly into a standard power outlet; no cables or desk space required. Simple Setup – Quick setup via the Tether app or WPS button; up and running in minutes. Use Cases Extending Wi-Fi to bedrooms, bathrooms, or floors far from the router Boosting signal in garages, backyards, and outdoor entertaining areas Improving coverage in homes with thick walls or multiple storeys Extending an existing router’s range without replacing it Small offices needing basic wireless coverage extension Technical Specifications Specification Details Model RE205 Wi-Fi Standard AC750 Dual-Band (802.11ac) 2.4GHz Speed Up to 300Mbps 5GHz Speed Up to 433Mbps Combined Speed Up to 750Mbps Signal Indicator Intelligent LED Signal Light Router Compatibility Any Wi-Fi Router or Wireless Access Point Setup Method Tether App or WPS Button Form Factor Compact Plug-In (Wall Outlet) Vendor TP-Link Frequently Asked Questions Will the RE205 work with my existing router? Yes. The RE205 is compatible with any Wi-Fi router or wireless access point, regardless of brand. It supports both 2.4GHz and 5GHz networks and requires no special configuration on your existing router. What is the intelligent signal light for? The built-in LED signal indicator shows the strength of the RE205’s connection to your router in real time. A strong signal reading means you’ve found a good placement spot; a weak reading means you should move the extender closer to the router. This takes the guesswork out of finding the optimal location. Does the RE205 create a separate Wi-Fi network name? By default, the RE205 creates an extended network with a slightly different name (e.g. your existing network name + “_EXT”). You can manually set it to use the same network name as your router so devices connect seamlessly, though roaming between the router and extender is not as seamless as a full mesh system. What is the difference between a range extender and a mesh Wi-Fi system? A range extender like the RE205 rebroadcasts your existing router’s signal to extend coverage. It is a cost-effective solution for adding coverage to one or two areas. A mesh Wi-Fi system (such as the TP-Link Deco range) uses multiple units that work together as one unified network with seamless roaming. For whole-home coverage with seamless device handoff, a mesh system is the better choice; for extending coverage to a specific area, a range extender is simpler and more affordable. How do I set up the RE205? Plug the RE205 into a power outlet, then set it up using the TP-Link Tether app on your smartphone or press the WPS button on both the RE205 and your router to connect automatically. Most users are up and running in under five minutes. Placement Tip: For best performance, place the RE205 halfway between your router and the dead zone — close enough to receive a strong signal from the router, but far enough to extend coverage into the area you need. Use the intelligent signal light to confirm a good connection before finalising placement.

Read more less