Ubiquiti Accessories

• Save -$0.94

  Ubiquiti Ubiquiti POE-24-7W-G-WH 24V DC Gigabit PoE Injector — 0.3A / 7W

   

  Genuine Ubiquiti PoE Adapter — NDAA Compliant Ubiquiti POE-24-7W-G-WH — 24V DC Gigabit PoE Injector (0.3A / 7W) The Ubiquiti POE-24-7W-G-WH is a genuine 24V DC Gigabit PoE adapter that powers compatible Ubiquiti devices over a single Ethernet cable, with built-in surge and clamping protection to help safeguard your gear. Delivering 24V DC at 0.3A (7W) through a Gigabit-capable RJ45 port, it's the reliable way to power 24V passive PoE UniFi and airMAX hardware where a PoE switch isn't available. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, with expert AU support on hand. 24V DC Gigabit Output Supplies 24V DC @ 0.3A (7W) over a Gigabit LAN port, powering and connecting your 24V passive PoE device through one cable. Surge & Clamping Protection Difference and common-mode surge protection with up to 1500A max surge discharge and 11V data / 60V power clamping helps protect connected equipment. Remote Reset Capability Built-in reset button and remote reset support let you power-cycle a connected device without unplugging it on site. Genuine Ubiquiti, NDAA Compliant Authentic Ubiquiti hardware that is NDAA Section 889 compliant, suitable for government and security-sensitive installs. Model POE-24-7W-G-WH Output Voltage 24V DC @ 0.3A (7W) Rated Input 100–240V AC @ 50/60 Hz Input Current 0.3A @ 120V AC, 0.2A @ 240V AC Gigabit LAN Port Yes Data IN / PoE RJ45 shielded socket 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (−) Reset Button Yes (remote reset capable) Efficiency 80+% Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power Peak Pulse Current 36A (10/1000 µs) data AC Connector IEC-320 C6 Operating Temperature 0 to 40°C Operating Humidity 35 to 95% non-condensing Dimensions / Weight 72 × 45 × 33 mm • 72.1 g Certifications CE, FCC, IC, UL Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $15.24 $14.30

• 

  Ubiquiti Ubiquiti UB-AM Universal Wall / Pole Mounting Bracket

   

  Genuine Ubiquiti Accessory — NDAA Compliant Ubiquiti UB-AM Universal Wall / Pole Mounting Bracket The Ubiquiti UB-AM is a universal wall and pole mounting bracket that gives your Ubiquiti devices secure, flexible positioning on a wall or pole for optimal signal performance. Quick to install and built for professional deployments, it ships as genuine Ubiquiti stock with fast Australia-wide delivery and is fully NDAA compliant for use anywhere in Australia. Wall or Pole Mounting Versatile bracket lets you mount compatible Ubiquiti devices to a wall or pole for reliable, optimised positioning. Quick, Easy Installation Designed for fast, tool-light setup so installers can deploy and reposition devices with minimal effort. Broad Compatibility Works as a universal mount across a range of Ubiquiti models, simplifying multi-site and mixed-hardware installs. NDAA Compliant Ubiquiti is a US-based manufacturer — suitable for government, defence, and security-sensitive sites. Technical Specifications Model UB-AM Type Universal wall / pole mounting bracket Dimensions 484.8 × 162.1 × 125 mm (19.1 × 6.4 × 4.9″) Weight 1.01 kg (2.2 lb) Quantity 1 pc / unit Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $29.70

• 

  Ubiquiti UniFi Patch Cable .22m White, Both End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter U-Cable-Patch-RJ45

   

  Ubiquiti UniFi Patch Cable Single Unit, 0.1m, White, Both End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter Ultra-thin patch cable with GbE support and flexible, bendable boots for enhanced installation versatility. Bendable booted RJ45 3 mm outer diameter Cable length: 0.1 to 8 m

  Read more less

   

  $15.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 8M White — All-Weather Cat 5e Shielded RJ45 (UACC-Cable-Patch-Outdoor-8M-W)

   

  UniFi Outdoor Patch Cable — NDAA Compliant UniFi Patch Cable Outdoor 8M White — All-Weather Cat 5e Shielded RJ45 (UACC-Cable-Patch-Outdoor-8M-W) The UniFi Patch Cable Outdoor 8M is a rugged, all-weather Category 5e patch cable built for outdoor UniFi deployments that demand extra protection from the elements. A shielded RJ45 plug, internal foil shielding, and a built-in ESD drain wire are sealed inside a weatherproof thermoplastic elastomer (TPE) jacket, with 24 AWG stranded copper conductors for reliable connections in the harshest conditions. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather TPE Jacket A weatherproof, insulating thermoplastic elastomer jacket offers extreme protection against rain, UV, and temperature swings for exposed outdoor runs. Shielded & ESD-Protected Internal foil shielding plus a built-in ESD drain wire and a shielded RJ45 plug guard against interference and electrostatic discharge. 24 AWG Stranded Copper Pure stranded copper conductors deliver dependable PoE and data performance across the full 8-metre length. Model UACC-Cable-Patch-Outdoor-8M-W Cable Length 8 m (26.25 ft) Cable Type Category 5e Cable Colour White Shielding Type STP (internal foil shielding + ESD drain wire) Connector Shielded RJ45 plug Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm (0.24″) Bend Radius Min. 24 mm (0.94″) Flame Rating VW-1 (UL1581) Weight 315 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $25.00

• 

  Ubiquiti Ubiquiti UISP-Cable-Pro Cat5e Outdoor Cable 305m — Shielded, ESD Drain Wire (Replaces TC-PRO)

   

  Carrier-Class Outdoor Cat5e — NDAA Compliant Ubiquiti UISP-Cable-Pro — Cat5e Outdoor Shielded Ethernet Cable, 305 m (Replaces TC-PRO) The Ubiquiti UISP-Cable-Pro is an industrial-grade, carrier-class Category 5e outdoor Ethernet cable built to protect your network from the elements and electrostatic damage. A highly insulating, weatherproof jacket guards against rain, snow, and extreme conditions, while internal foil shielding and an integrated ESD drain wire maintain reliable Gigabit Ethernet link rates even with electromagnetic interference present. Supplied as a full 305 m (1,000 ft) reel and a direct replacement for the older TC-PRO, it ships as genuine Ubiquiti stock with fast AU-wide shipping right across Australia. Weatherproof Outdoor Jacket A highly insulating, weatherproof jacket prevents damage from rain, snow, and other extreme climatic conditions for reliable long-run outdoor cabling. Shielding + ESD Drain Wire Internal foil shielding and a drain wire protect against electrostatic discharge (ESD) and sustain Gigabit Ethernet link rates even with electromagnetic interference. 24 AWG Solid Copper 24 AWG solid copper conductor pairings deliver strong, stable performance over long structured-cabling runs. 305 m Reel — Replaces TC-PRO Supplied as a full 1,000 ft (305 m) Cat5e reel and a direct, drop-in replacement for Ubiquiti's earlier TC-PRO cable. Technical Specifications Model / SKU UISP-Cable-Pro (replaces TC-PRO) Category Category 5e Length 1,000 ft (305 m) Conductor 24 AWG solid copper conductor pairings Jacket Insulated, weatherproof outdoor jacket Shielding Internal foil shielding with integrated ESD drain wire Performance Maintains Gigabit Ethernet link rates under EMI Application Outdoor / carrier-class structured cabling Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $299.00

• Save -$1.00

  Ubiquiti Ubiquiti UMA-D UniFi AC Mesh Dual-Band Directional Antenna

   

  UniFi Accessory — NDAA Compliant Ubiquiti UMA-D UniFi AC Mesh Dual-Band Directional Antenna The Ubiquiti UMA-D is a high-efficiency, dual-band directional mesh antenna designed to extend the range and shape the coverage of the UniFi AC Mesh access point (UAP-AC-M). Optimised for 802.11ac, it delivers 15 dBi gain on 5 GHz and 10 dBi on 2.4 GHz with dual-linear polarisation, housed in an outdoor UV-stabilised enclosure for indoor or outdoor use. A ball-joint mount allows precise aiming on a pole or wall. Genuine Ubiquiti stock with fast Australia-wide shipping. High Directional Gain 15 dBi at 5 GHz and 10 dBi at 2.4 GHz focuses signal where you need it, boosting range and link reliability for your UAP-AC-M. Dual-Band Coverage Shaping Supports 2.4–2.5 GHz and 5.1–5.9 GHz with a 45° (5 GHz) / 90° (2.4 GHz) beamwidth for customised pattern shaping. Weather-Resistant Build Encased in outdoor UV-stabilised plastic, the UMA-D is rated for indoor and outdoor installation in tough Australian conditions. Precise Ball-Joint Mounting The integrated ball-joint mount enables accurate pole or wall aiming, with two RP-SMA connectors for the UAP-AC-M. Technical Specifications Model UMA-D Compatibility UniFi AC Mesh AP (UAP-AC-M) Supported Frequency 2.4–2.5 GHz • 5.1–5.9 GHz Gain 15 dBi (5 GHz) • 10 dBi (2.4 GHz) Beamwidth (HPOL / VPOL / Elevation) 45° (5 GHz) • 90° (2.4 GHz) Polarisation Dual-linear Max VSWR 2:1 Cross-Pol Isolation 30 dB (5 GHz) • 25 dB (2.4 GHz) RF Connections (2) RP-SMA Enclosure Material Outdoor UV-stabilised plastic Mounting Ball-joint mount (pole or wall) Dimensions 201.3 × 128 × 32.5 mm Weight 400 g (without mount) • 480 g (with mount) Compliance NDAA compliant Certifications Anatel: 06187-19-08356 Downloads & Resources UMA-D Tech Specs UMA-D Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $174.80 $173.80

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 3m White — Ultra-Thin Cat6 RJ45 Ethernet Cable (U-Cable-Patch-3M-RJ45)

   

  UniFi — NDAA Compliant Ubiquiti UniFi Patch Cable 3m White — Ultra-Thin Cat6 RJ45 Ethernet Cable (U-Cable-Patch-3M-RJ45) The UniFi Patch Cable 3m (White) is Ubiquiti’s ultra-thin Cat6 RJ45 lead, built for clean, professional installs anywhere in Australia. Its slim 3 mm TPE jacket and bendable booted RJ45 connectors on both ends let you route tight 90° turns behind racks, patch panels and wall plates without strain. With Gigabit Ethernet (GbE) performance, support for up to PoE+++, and TIA/EIA-568-B.2 Cat6 channel testing, it’s a tidy match for UniFi switches, gateways, access points and cameras. Genuine Ubiquiti stock with fast Australia-wide shipping. Ultra-Thin 3 mm Jacket A slim 3 mm thermoplastic elastomer (TPE) jacket keeps cable runs neat and easy to route through tight spaces, conduits and high-density patch panels. Bendable Booted RJ45 Both ends feature flexible, bendable booted RJ45 connectors that hold a tight bend — ideal for 90° turns behind equipment without stressing the contacts. Gigabit & PoE Ready Supports full Gigabit Ethernet (GbE) and up to PoE+++, powering and connecting UniFi switches, gateways, APs and cameras over a single tidy lead. Cat6 Channel Tested Manufactured to TIA/EIA-568-B.2 and ISO/IEC 11801 with 30 AWG stranded copper conductors for reliable, standards-compliant performance. Technical Specifications Model U-Cable-Patch-3M-RJ45 Length 3 m (9.9 ft) Colour White Connectors (2) Bendable booted RJ45 Supported Data Rate Gigabit Ethernet (GbE) Supported PoE Type Up to PoE+++ Cable Category / Standards Cat6 • TIA/EIA-568-B.2 • ISO/IEC 11801 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding Type UTP (unshielded twisted pair) Conductor Stranded copper, 30 AWG Bend Radius Min. 24 mm (0.94″) Flame Rating FT-2 (UL1581) Operating Environment Indoor Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $13.99

• 

  Ubiquiti Ubiquiti Instant 802.3af Outdoor Gigabit PoE Converter (INS-3AF-O-G)

   

  Ubiquiti Instant PoE — NDAA Compliant Ubiquiti Instant 802.3af Outdoor Gigabit PoE Converter (INS-3AF-O-G) The Ubiquiti INS-3AF-O-G is a weatherproof outdoor PoE converter that lets you power legacy 24V Ubiquiti gear directly from a standard 802.3af PoE switch. It takes 48V 802.3af power in and delivers 24V passive PoE out over Gigabit Ethernet, with ±15kV ESD/surge protection built in. Genuine Ubiquiti stock with fast AU-wide shipping anywhere in Australia. Model INS-3AF-O-G Type Instant 802.3af to 24V passive PoE converter (outdoor) Networking Interface (1) GbE RJ45 PoE in • (1) GbE RJ45 PoE out Power Input PoE 802.3af, 48V DC, 0.5A Power Output 24V passive PoE (Pairs 4, 5+; 7, 8 return) • max 24V DC, 0.5A ESD / Surge Protection ±15kV Ethernet Operating Temperature −30°C to 70°C Dimensions Ø30.2 × 166 mm (without RJ45 cable) Weight 90 g Compliance NDAA compliant 802.3af In, 24V Passive Out Run 24V passive-PoE Ubiquiti devices from any 802.3af switch — no separate power injector required. Full Gigabit Throughput Gigabit Ethernet on both PoE-in and PoE-out RJ45 ports keeps your link at full 10/100/1000 speed. ±15kV Surge Protection Built-in ±15kV Ethernet ESD/surge protection helps shield your equipment from spikes and static. Outdoor-Rated & NDAA Compliant A −30°C to 70°C operating range suits Australian outdoor installs, and it is NDAA Section 889 compliant. INS-3AF-O-G Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $47.30

• Save -$69.01

  Ubiquiti Ubiquiti UniFi Protect ViewPort PoE HDMI Adapter (UP-Viewport)

  1 review

   

  UniFi Protect · NDAA Compliant Ubiquiti UniFi Protect ViewPort PoE HDMI Adapter (UP-Viewport) The UniFi Protect ViewPort (UP-Viewport) connects a UniFi Protect camera system to an HDMI television or monitor, providing a dedicated live surveillance display without requiring a computer. It supports flexible camera layouts with up to a 16-stream matrix view and HDMI output up to 4K at 30 FPS. Video Output HDMI up to 4K/30 FPS Live View Up to 16 Streams Network & Power Gigabit PoE Model UP-Viewport Purpose-Built UniFi Protect Display Use the ViewPort at a reception desk, security office, control room, retail counter or other monitoring point. After adoption in UniFi Protect, select the required camera-view layout and display it on a connected HDMI screen. The compact adapter can mount discreetly behind a television or monitor. 4K HDMI OutputOutputs UniFi Protect live views to a compatible HDMI display at up to 4K resolution and 30 frames per second. 16-Stream MatrixSupports flexible multi-camera layouts containing up to 16 simultaneous Protect camera streams. Single-Cable PoEA Gigabit Ethernet connection supplies network connectivity and PoE power, reducing cabling at the display. Dedicated Live ViewDisplays camera feeds without leaving a computer connected to the television or monitor. Flexible MountingThe included TV mount allows discreet placement behind a compatible display. UniFi Protect ManagedConfiguration and camera-view selection are managed through the UniFi Protect web application or mobile app. Technical Specifications Official model UP-Viewport Function UniFi Protect camera-feed viewer for HDMI displays HDMI output Up to 4K at 30 FPS Matrix view Up to 16 camera streams Networking (1) GbE RJ45 port Power method PoE Maximum power consumption 9.5 W Dimensions 157 × 52 × 37 mm Weight 230 g without mount; 252 g with TV mount Operating temperature 0 to 40°C Operating humidity 20–80% non-condensing Compliance NDAA compliant Application UniFi Protect web, iOS and Android What You Need A working UniFi Protect deployment with compatible Protect cameras. A PoE network connection. A PoE switch or injector is required and is not included unless specifically stated. An HDMI television or monitor and an HDMI cable. The display and HDMI cable are sold separately. What's Included 1 × UniFi Protect ViewPort (UP-Viewport) TV/display mounting hardware supplied by Ubiquiti Downloads & Resources Official Ubiquiti Specifications Frequently Asked Questions Does the ViewPort record footage?No. It is a viewing adapter. Recording and storage are provided by your compatible UniFi Protect console or NVR. Can it display multiple cameras?Yes. It supports matrix layouts containing up to 16 Protect camera streams. Does it require separate power?No local power adapter is required when connected to a compatible PoE source. Is an HDMI cable included?No. Use a suitable HDMI cable for the required resolution and installation distance.

  Read more less

   

  $470.00 $400.99

• 

  Ubiquiti Ubiquiti USW-Flex-Utility — Outdoor Weatherproof Enclosure for UniFi Switch Flex

   

  UniFi Accessory — NDAA Compliant Ubiquiti USW-Flex-Utility — Outdoor Weatherproof Enclosure for UniFi Switch Flex The USW Flex Utility (USW-Flex-Utility) is an outdoor, weatherproof enclosure purpose-built for the UniFi Switch Flex (USW-Flex). It ships with an Ethernet patch cable and a 60W PoE adapter that delivers a maximum PoE budget of 46W, so your Flex switch can power cameras and access points at an exposed outdoor location. Easily pole-mounted with clean cable management and a screw lock for added security, it is the simple way to take a UniFi Switch Flex outdoors. Genuine Ubiquiti stock with fast Australia-wide shipping. Outdoor Weatherproof Housing A rugged enclosure that lets you deploy the UniFi Switch Flex at exposed outdoor locations across tough Australian conditions. 60W PoE Adapter Included Ships with a 54V 60W PoE adapter and an Ethernet patch cable, providing a maximum PoE budget of 46W for your Flex switch. Easy Pole Mounting Mounts quickly to a pole with clean cable management and a screw lock for physical security. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations. Technical Specifications Model USW-Flex-Utility Compatible Switch UniFi Switch Flex (USW-Flex) In the Box Outdoor enclosure, 60W PoE adapter, Ethernet patch cable Max PoE Budget 46W (powered by included 60W PoE adapter) PoE Adapter Output 54V DC, 1.11A • rated 100–240V AC input Enclosure Dimensions (with mount) 249 × 218 × 60 mm Enclosure Weight (with mount) 740 g PoE Adapter Dimensions 118.5 × 63 × 34.7 mm • 206 g Mounting Pole mount with screw lock and cable management Operating Temperature −20 to 60°C (adapter); 5–90% non-condensing humidity Compliance NDAA compliant Downloads & Resources USW-Flex / USW-Flex-Utility Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $95.70

• 

  Ubiquiti Ubiquiti UniFi U-Cable-Patch-2M-RJ45 — 2m Cat6 RJ45 Patch Cable, White, Ultra-Thin 3mm, Bendable 90° Booted

   

  UniFi Cat6 — NDAA Compliant UniFi 2m Cat6 RJ45 Patch Cable — White, Ultra-Thin 3mm, Bendable 90° Booted (U-Cable-Patch-2M-RJ45) The UniFi U-Cable-Patch-2M-RJ45 is a genuine Ubiquiti 2-metre Cat6 patch lead built for clean, professional UniFi installs. Its ultra-thin 3 mm jacket and booted RJ45 connectors that bend to 90° route neatly behind racks, around tight corners, and into wall plates without strain. Every cable passes the TIA-568-B.2 Cat6 Channel test by Fluke for reliable gigabit performance. Genuine Ubiquiti stock, NDAA compliant, in stock in Australia with fast AU-wide shipping. Bendable 90° Booted Ends The booted RJ45 connectors flex up to 90° at both ends, letting you route the cable cleanly into tight spaces and behind equipment without kinking. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter keeps cable bundles tidy and takes up minimal space in patch panels, conduits, and behind wall plates. Fluke-Tested Cat6 Performance Each cable passes the TIA-568-B.2 Cat6 Channel test by Fluke, delivering dependable gigabit Ethernet for UniFi switches, APs, and cameras. Genuine Ubiquiti, NDAA Compliant Authentic Ubiquiti accessory that matches the UniFi aesthetic and meets NDAA Section 889 requirements for security-sensitive sites. Technical Specifications Model U-Cable-Patch-2M-RJ45 Cable Type Cat6 RJ45 Ethernet patch cable Length 2 m Outer Diameter Ultra-thin 3 mm Connectors Booted RJ45, both ends bendable to 90° Performance Passes TIA-568-B.2 Cat6 Channel test by Fluke Colour White Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $9.90

• 

  Ubiquiti Ubiquiti UniFi Cat6 Patch Cable — 0.22m Black, Bendable RJ45 (U-Cable-Patch-RJ45-BK)

   

  UniFi Patch Cable — NDAA Compliant Ubiquiti UniFi Cat6 Patch Cable — 0.22m Black, Bendable RJ45 (U-Cable-Patch-RJ45-BK) The Ubiquiti UniFi Patch Cable (U-Cable-Patch-RJ45-BK) is a genuine Cat6 RJ45 patch lead built for clean, professional UniFi installs. At just 220 mm (0.22 m) long with an ultra-thin 3 mm diameter and both ends bendable to 90°, it keeps cabling tidy inside racks, enclosures, and behind switches and gateways. Finished in black to match UniFi hardware, it's the ideal short jumper for patch panels and equipment-to-equipment runs. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Cat6 Performance Cat6-rated RJ45 patch lead for reliable gigabit connectivity between UniFi switches, gateways, and patch panels. Bendable 90° Booted Ends Both RJ45 ends bend to 90°, letting you route cleanly out of tight spaces without strain on the connector. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter keeps high-density racks and enclosures neat and easy to manage. Short 220 mm Jumper The compact 0.22 m length is purpose-built for short patch-panel and adjacent-device connections. Technical Specifications Model U-Cable-Patch-RJ45-BK Cable Category Cat6 Connectors RJ45 (both ends), booted & bendable to 90° Length 220 mm (0.22 m) Outer Diameter Ultra-thin 3 mm Colour Black Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $6.95

• 

  Ubiquiti Ubiquiti UniFi Instant 802.3af Gigabit PoE Adapter - INS-3AF-I-G

   

  UniFi — NDAA Compliant Ubiquiti UniFi Instant 802.3af Gigabit PoE Adapter (INS-3AF-I-G) The Ubiquiti UniFi Instant 802.3af Adapter (INS-3AF-I-G) is a compact indoor Gigabit converter that transforms passive PoE devices into 802.3af-compliant products, letting you power them from any standard 802.3af PoE switch or injector. With a Gigabit (10/100/1000) pass-through, it's the simple way to add a legacy or passive-PoE device to a modern UniFi network without a separate power supply. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Passive to 802.3af Converts passive PoE input into a standards-based 802.3af output, so 802.3af switches and injectors can power your device safely. Gigabit Pass-Through Full 10/100/1000 Mbps data throughput keeps high-bandwidth devices running at full speed. Indoor & Compact A small, inline indoor form factor that tucks neatly behind equipment or inside a comms cabinet. NDAA Compliant Manufactured by Ubiquiti and NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model INS-3AF-I-G Type Instant 802.3af PoE converter (passive PoE to 802.3af) Data Rate Gigabit Ethernet — 10/100/1000 Mbps PoE Standard (Output) IEEE 802.3af Placement Indoor Compliance NDAA compliant Downloads & Resources INS-3AF-I-G Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $41.80

• 

  Ubiquiti Ubiquiti POE-24-12W-G Gigabit PoE Injector — 24V DC 12W with ESD Protection

   

  Genuine Ubiquiti — NDAA Compliant Ubiquiti POE-24-12W-G Gigabit PoE Injector — 24V DC, 12W, ESD Protection (POE-24-12W-G) The Ubiquiti POE-24-12W-G is a genuine 24V DC passive PoE injector that delivers up to 12W of power over a single Gigabit Ethernet cable, powering compatible Ubiquiti 24V devices without a separate power run. Built-in ESD, surge, and clamping protection plus a grounded AC cable help shield your gear against electrostatic discharge — the leading cause of outdoor device failures — while the status LED gives at-a-glance power confirmation. NDAA compliant, genuine Ubiquiti stock, with fast Australia-wide shipping right across Australia. 24V DC / 12W Output Supplies up to 12W of passive PoE for compatible Ubiquiti 24V devices over one cable. Gigabit Ethernet Gigabit Ethernet pass-through carries both power and data on a single run. ESD & Surge Protection Surge, clamping, and ESD protection with a grounded AC cable guard against outdoor device failures. Status LED An integrated LED gives clear at-a-glance confirmation that power is being delivered. Model POE-24-12W-G Output 24V DC, 12W Ethernet Gigabit Ethernet Protection ESD, surge, and clamping protection; grounded AC cable Indicator Status LED Compliance NDAA compliant POE-24-12W-G Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $28.60

• 

  Ubiquiti Ubiquiti UniFi Etherlighting Patch Cable 0.15m — White/Translucent (NHU-PATCH-EL-0.15)

   

  UniFi Etherlighting — NDAA Compliant Ubiquiti UniFi Etherlighting Patch Cable 0.15m — White / Translucent (NHU-PATCH-EL-0.15) The UniFi Etherlighting Patch Cable is a nano-thin 0.15 m indoor patch lead built to showcase Ubiquiti’s Etherlighting™ effects while delivering high-speed 10 GbE connectivity and PoE+++ support. Its translucent booted RJ45 connectors maximise Etherlighting brightness, and a slim 2.5 mm jacket keeps rack and patch-panel cabling tidy. Genuine Ubiquiti stock with fast Australia-wide shipping. 10 GbE High-Speed Supports data rates up to 10 Gigabits per second for demanding switching, server, and high-bandwidth network links. Etherlighting Translucent RJ45 Translucent booted RJ45 connectors are designed for optimal Etherlighting™ brightness on compatible UniFi switches. Slim 2.5 mm Jacket A nano-thin 2.5 mm outer diameter keeps patch-panel and rack cabling neat and easy to route. PoE+++ Ready Carries power and data together with support up to PoE+++ for high-power UniFi devices. Technical Specifications Model NHU-PATCH-EL-0.15 Length End-to-end: 0.15 m Colour White / Translucent Operating Environment Indoor Supported Data Rate Up to 10 GbE Supported PoE Type Up to PoE+++ Cable Jacket Diameter 2.5 mm (0.1″) Connector Type (2) Translucent booted RJ45 Flame Rating VW-1 (UL1581) Standards TIA-568-B.2 Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $17.00 - $179.99

• 

  Ubiquiti Ubiquiti UACC-DAC-SFP10-3M SFP+ 10G Direct Attach Cable (DAC) — 3m

   

  SFP+ 10G DAC — NDAA Compliant Ubiquiti UACC-DAC-SFP10-3M — 10G SFP+ Direct Attach Cable (3m) The Ubiquiti UACC-DAC-SFP10-3M is a passive copper SFP+ Direct Attach Cable (DAC) that delivers a reliable 10 Gbps link between two SFP+ ports. At 3 metres, it is the ideal low-cost, low-latency way to connect switches, UniFi gateways, and servers within a rack or across adjacent racks — no transceivers or fibre patch leads required. Genuine Ubiquiti stock, NDAA compliant, with fast shipping right across Australia. 10 Gbps Throughput Supports 10/1 Gbps data rates over a passive copper SFP+ to SFP+ connection — full-speed 10G uplinks with minimal latency. Plug-and-Play SFP+ Integrated SFP+ connectors on both ends — no separate optics or fibre needed. Just plug in and link your switches. 3m Length The perfect run for short switch-to-switch and switch-to-server links inside or between adjacent racks. NDAA Compliant Genuine Ubiquiti accessory, NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model UACC-DAC-SFP10-3M Cable Type SFP+ Direct Attach Cable (DAC), passive copper Connectors SFP+ to SFP+ Supported Data Rates 10/1 Gbps Max Throughput 10 Gbps Length 3 m Compliance NDAA compliant Downloads & Resources UACC-DAC-SFP10-3M Product Page Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $45.99

• 

  Ubiquiti Ubiquiti WM-W WiFiMan Wizard — Portable WiFi Spectrum Analyzer

   

  UniFi — NDAA Compliant Ubiquiti WM-W WiFiMan Wizard — Portable WiFi Spectrum Analyzer The Ubiquiti WM-W WiFiMan Wizard is a pocket-sized spectrum analyzer that scans the 2.4 GHz and 5 GHz WiFi bands and streams real-time spectrum data to the WiFiMan app on your phone over Bluetooth. Weighing just 32 g and recharging over USB-C, it lets installers and IT teams run fast wireless site surveys and hunt down interference anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Dual-Band Scanning Analyses both the 2.4–2.5 GHz and 5.15–5.85 GHz bands, with an amplitude range of −96 dBm to 0 dBm at 1 dBm resolution. Truly Pocket-Sized At 78.5 × 50.5 × 7.9 mm and just 32 g, the WM-W slips into any kit bag for on-site wireless surveys. Wireless & USB-C Pairs to your iOS or Android phone over Bluetooth and recharges from its built-in rechargeable Li-ion battery via USB-C. NDAA Compliant Made by US-based Ubiquiti and NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model WM-W (WiFiMan Wizard) Type Portable WiFi spectrum analyzer Frequency Range 2.4–2.5 GHz • 5.15–5.85 GHz Amplitude Range −96 dBm to 0 dBm • 1 dBm resolution Management Interface Bluetooth (WiFiMan app, iOS / Android) Power Rechargeable Li-ion battery, 3.7 V DC, 300 mAh Charging USB-C, 5 V DC / 1 A Max. Power Consumption 32.4 mW LED / Buttons White/blue/red LED • Power + Factory-reset buttons Enclosure Plastic • IP55 Dimensions / Weight 78.5 × 50.5 × 7.9 mm • 32 g Operating Temperature 0°C to 40°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant WM-W Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $249.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 8M Black — Cat5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-8M-BK)

   

  UniFi Accessory — NDAA Compliant UniFi Patch Cable Outdoor 8M Black — Cat5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-8M-BK) The UniFi Patch Cable Outdoor 8M Black is a rugged, all-weather Cat5e patch cable built to keep your outdoor UniFi devices reliably connected in the harshest conditions. It combines a shielded RJ45 plug, internal foil shielding, and a built-in ESD drain wire, all sealed inside a weatherproof thermoplastic-elastomer jacket — ideal for cameras, access points, and gateways across any Australian site. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather Protection A weatherproof TPE insulating jacket and shielded RJ45 plug stand up to rain, dust, and UV for dependable outdoor connectivity. Shielded & ESD-Protected Internal foil shielding (STP) plus an integrated ESD drain wire reduce interference and protect connected equipment. 8-Metre Reach 24 AWG stranded copper conductors in an 8 m length comfortably span the gap to outdoor cameras and APs. Technical Specifications Model UACC-Cable-Patch-Outdoor-8M-BK Cable Length 8 m Cable Type Category 5e Shielding Type STP (internal foil shielding) Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm Bend Radius Min. 24 mm Flame Rating VW-1 (UL1581) Cable Colour Black Weight 315 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Compliance NDAA compliant Downloads & Resources UACC-Cable-Patch-Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $25.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 5M Black — Cat 5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-5M-BK / NHU-UAC-O-5M-BLK)

   

  UniFi Outdoor Cat 5e — NDAA Compliant Ubiquiti UniFi Patch Cable Outdoor 5M Black — Cat 5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-5M-BK) The UniFi Patch Cable Outdoor 5M (Black) is a rugged, all-weather Category 5e patch cable built to survive the harshest outdoor conditions. With a shielded RJ45 plug, internal foil shielding, an integrated ESD drain wire and a weatherproof TPE jacket, it’s the reliable way to connect outdoor UniFi cameras, access points and devices anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather Shielded Build Shielded STP construction with internal foil shielding and an integrated ESD drain wire protects signal integrity in tough outdoor environments. Weatherproof TPE Jacket A 6 mm thermoplastic-elastomer jacket resists UV, moisture and the elements, rated for operation from −40°C to 80°C. 24 AWG Stranded Copper Flexible 24 AWG stranded copper conductors deliver dependable Cat 5e performance to your outdoor UniFi gear. NDAA Compliant Manufactured by Ubiquiti and NDAA Section 889 compliant — suitable for government and security-sensitive installations. Model UACC-Cable-Patch-Outdoor-5M-BK (NHU-UAC-O-5M-BLK) Cable Length 5 m Cable Type Category 5e Shielding STP (shielded twisted pair) with internal foil shielding & ESD drain wire Connector Shielded RJ45 plug Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm Bend Radius Min. 24 mm Flame Rating VW-1 (UL1581) Cable Colour Black Weight 200 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2, ISO/IEC 11801 Compliance NDAA compliant UACC-Cable-Patch-Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $21.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 3m Black Cat6 RJ45 Ethernet (U-Cable-Patch-3M-RJ45-BK)

   

  Genuine UniFi — NDAA Compliant UniFi Patch Cable 3m Black — Cat6 RJ45 Ethernet, Ultra-Thin 3mm (U-Cable-Patch-3M-RJ45-BK) The UniFi Patch Cable 3m (U-Cable-Patch-3M-RJ45-BK) is a genuine Ubiquiti ultra-thin Cat6 patch lead in black, with a slim 3 mm jacket and bendable booted RJ45 connectors at both ends for clean, tidy runs in racks, wall plates, and tight installs. Supporting Gigabit Ethernet and up to PoE+++, it’s the ideal patch lead for connecting UniFi switches, access points, and cameras — with genuine Ubiquiti stock and fast shipping Australia-wide. Ultra-Thin 3mm Jacket A slim 3 mm TPE jacket with a minimum 24 mm bend radius keeps cabling neat and flexible in dense patch panels and tight spaces. Bendable Booted RJ45 Both ends feature bendable booted RJ45 connectors that flex to suit your install while protecting the latch and conductors. Gigabit + PoE+++ Ready Supports Gigabit Ethernet data rates and up to PoE+++, powering and connecting UniFi switches, APs, and cameras over a single lead. Cat6 Certified Built to TIA/EIA-568-B.2 and ISO/IEC 11801 standards with 30 AWG stranded copper conductors for reliable performance. Technical Specifications Model U-Cable-Patch-3M-RJ45-BK Length 3 m Colour Black Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Up to PoE+++ Connectors (2) Bendable booted RJ45 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Bend Radius Min. 24 mm (0.94″) Operating Environment Indoor Flame Rating FT-2 (UL1581) Standards TIA/EIA-568-B.2, ISO/IEC 11801 Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $13.99

• 

  Ubiquiti Ubiquiti U-PRO-MP — Versatile Mounting System for UniFi Access Points

   

  Genuine Ubiquiti · Mounting System · Stainless SteelUbiquiti U-PRO-MPOne Versatile Mount for Your UniFi Access Points The Ubiquiti U-PRO-MP is a professional mounting system for UniFi Access Points, built from durable stainless steel. With a variety of mounting holes and a printed legend identifying which holes suit each AP, it makes installing a wide range of UniFi access points fast and foolproof. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Broad AP Compatibility — works with U6 Enterprise, U6 Pro, U6 Long-Range, AC Pro, AC HD, AC SHD and AC XG. Versatile Hole Pattern — a variety of mounting holes covers many different installation scenarios. Printed Legend — markings on the plate identify the correct holes for each access point. Durable Build — stainless steel enclosure for long-lasting strength and corrosion resistance. Specifications Model U-PRO-MP Category Mounting System Material Stainless steel Dimensions 175.6 mm (6.9") Weight 139 g (4.9 oz) Compatible With U6 Enterprise, U6 Pro, U6 Long-Range, AC Pro, AC HD, AC SHD, AC XG Warranty 3 Years (AU) Frequently Asked Questions Which access points does it support?It is compatible with U6 Enterprise, U6 Pro, U6 Long-Range, AC Professional, AC HD, AC SHD and AC XG. How do I know which holes to use?A legend printed on the mounting plate identifies the holes used for each access point. What is it made from?It features a durable stainless steel enclosure. What are its dimensions?It measures 175.6 mm (6.9") and weighs 139 g (4.9 oz).

  Read more less

   

  $18.11

• 

  Ubiquiti UniFi Patch Cable 1m White, Both End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter U-Cable-Patch-1M-RJ45

   

  Ubiquiti UniFi Patch Cable Single Unit, 1m, White, End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter Ultra-thin patch cable with GbE support and flexible, bendable boots for enhanced installation versatility. Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 1m Pass TIA-568-B.2 Cat6 Channel test by Fluke

  Read more less

   

  $18.00

• 

  Ubiquiti Ubiquiti UACC-CM-RJ45-1G SFP to RJ45 Transceiver Module — 1G Copper

   

  Genuine Ubiquiti — NDAA Compliant Ubiquiti UACC-CM-RJ45-1G SFP to RJ45 Transceiver Module (1G Copper) The Ubiquiti UACC-CM-RJ45-1G is a 1000Base-T copper SFP-to-RJ45 transceiver that adds a standard Gigabit Ethernet port to any SFP slot on your UniFi switch or gateway. It delivers a 1 Gbps throughput rate over runs of up to 100 m on Cat5e/Cat6 cabling, letting you connect copper devices to fibre-ready hardware without extra adapters. Genuine Ubiquiti stock with fast Australia-wide shipping. Model UACC-CM-RJ45-1G Type Copper SFP to RJ45 transceiver module Standard 1000Base-T Throughput Rate 1 Gbps Max Distance Up to 100 m Interface SFP (host) / RJ45 (output) Brand Ubiquiti Compliance NDAA compliant Gigabit Copper in an SFP Slot Turns any SFP port into a standard 1000Base-T RJ45 port for connecting copper Ethernet devices to your UniFi switch or gateway. 1 Gbps Up to 100 m Full Gigabit throughput over Cat5e/Cat6 cable runs of up to 100 metres — no extra media converters required. Genuine Ubiquiti, NDAA Compliant Authentic Ubiquiti hardware that is NDAA Section 889 compliant for government and security-sensitive installs. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $38.99

• 

  Ubiquiti Ubiquiti UACC-Retrofit-PSU-12V — UniFi Retrofit PSU 12V Door Access Power Supply (SLA Battery Backup)

   

  UniFi Door Access — NDAA Compliant UACC-Retrofit-PSU-12V — Genuine Australian Ubiquiti Stock & Battery-Backup Ready The Ubiquiti UniFi Retrofit PSU 12V (UACC-Retrofit-PSU-12V) is a dedicated 12V DC power supply for the UniFi Retrofit Hub, purpose-built to power your door-access hardware and keep it running through a mains outage. It delivers a clean 12V DC, 5A output, charges an optional 12V SLA backup battery, and reports health through three status LEDs — all in a compact metal chassis that mounts neatly beside the hub. NDAA Section 889 compliant, CE/FCC/IC certified, with genuine Australian stock and fast Australia-wide shipping. Clean 12V / 5A Output Supplies a stable 12V DC at 5A to the UniFi Retrofit Hub, with up to 80W max power draw and 85% efficiency for reliable, everyday door-access power. SLA Battery Backup Ready A dedicated DC in/out port charges an optional 12V SLA battery at 0.5A, so entry doors and readers keep working during a power failure. Battery sold separately. Simple 3-Wire Install One AC input, one DC output to the Retrofit Hub, and one DC in/out for the battery — plus three status LEDs for at-a-glance health and quick troubleshooting. NDAA Compliant & Locally Backed Genuine Ubiquiti hardware, NDAA Section 889 compliant and CE/FCC/IC certified — ready for government, defence and security-sensitive sites, with expert AU support. Technical Specifications Model UACC-Retrofit-PSU-12V (UniFi Retrofit PSU 12V) Function 12V DC power supply for the UniFi Retrofit Hub, with optional SLA battery backup Compatibility UniFi Retrofit Hub Power Method 100–240V AC, 50/60 Hz • 12V SLA battery Output Rating 12V DC, 5A Max. Power Consumption 80 W Efficiency 85% SLA Backup Battery 12V • charging current 0.5A (battery sold separately) Wiring Connections (1) AC input • (1) DC output (for Retrofit Hub) • (1) DC input/output (for battery) LEDs (3) Status Dimensions 127 × 76 × 35 mm Weight 350 g Operating Temperature −10 to 40°C Storage Temperature −40 to 70°C Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Frequently Asked Questions What does the UniFi Retrofit PSU 12V do? It is a dedicated 12V DC power supply for the UniFi Retrofit Hub. It powers the hub from mains AC and can charge and switch to an optional 12V SLA battery so your door access keeps running during a power outage. Which devices is it compatible with? It is designed to power the UniFi Retrofit Hub, the module that brings existing (third-party) access-control door hardware into UniFi Access. Does it support battery backup? Yes. A dedicated DC input/output port charges a 12V SLA battery at 0.5A and provides seamless backup power if mains AC is lost. Is the backup battery included? No — the 12V SLA battery is sold separately, so you can size runtime to your site. Choose a battery capacity (Ah) to suit how long you need doors to stay powered during an outage. What is the output rating? 12V DC at 5A, with a maximum power consumption of 80W and 85% efficiency. What input voltage does it accept? Universal 100–240V AC at 50/60 Hz, so it works on Australian mains without a separate adapter. How do I know it is working? Three status LEDs indicate AC input, DC output and battery status for quick, at-a-glance confirmation and troubleshooting during install. Is it NDAA compliant? Yes. The UACC-Retrofit-PSU-12V is NDAA Section 889 compliant and CE/FCC/IC certified, suitable for government, defence and security-sensitive installations. Downloads & Resources UACC-Retrofit-PSU-12V Datasheet Ubiquiti Retrofit PSU Quick Start Guide Powers the UniFi Retrofit Hub from 100–240V AC mains; mount the PSU close to the hub. For backup, connect a 12V SLA battery to the DC in/out port — the PSU charges it at 0.5A and switches over automatically on mains failure. Use the three status LEDs to confirm AC input, DC output and battery health during commissioning. Follow the Ubiquiti installation guide for wiring, mounting and battery-safety guidance. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $189.00

• 

  Ubiquiti Ubiquiti UACC-Cable-C13-C14 1.8m 10A/250V Braided Power Cable

   

  Ubiquiti UniFi · Series Power Connectivity Professional Grade Power Routing for Enterprise Racks The Ubiquiti UACC-Cable-C13-C14 is a precision-engineered 1.8-metre braided power cable designed specifically for high-density server rooms, enterprise network racks, and professional AV infrastructure. Built to seamlessly bridge power distribution units (PDUs) or uninterruptible power supplies (UPS) with critical networking hardware, this cable offers clean cable management, exceptional durability, and robust electrical stability for continuous mission-critical uptime. Electrical Rating 10A / 250V AC Cable Length 1.8 m (5.9 ft) Jacket Material Durable Braided PVC Connector Types IEC C13 to IEC C14 Optimised Routing and Superior Thermal Resistance Engineered to prevent accidental disconnections and reduce thermal clutter inside tightly packed enclosures, the UACC-Cable-C13-C14 utilises an advanced exterior sleeve layout. This braided design protects against physical abrasion, sharp cabinet edges, and daily wear-and-tear while retaining optimal flexibility for clean 90-degree bends behind enterprise switches, gateways, and cloud keys. Anti-Abrasion Braided Design The protective external braiding significantly lowers friction when pulling or routing cables through densely packed cable management arms, ensuring long-term resilience in active data center environments. Standardized Rack Compatibility Featuring standard IEC 60320 C13 female sockets and C14 male plugs, this cable integrates perfectly with standard rack-mount power distribution units and enterprise server gear without loose tolerances. Technical Specification Matrix Model UACC-Cable-C13-C14 Cable Length 1.8 m (5.9 ft) Connector A IEC 60320 C14 (Male Plug) Connector B IEC 60320 C13 (Female Socket) Electrical Rating 10A / 250V AC Jacket Material Polyvinyl Chloride (PVC) with Braided Sleeve Outer Diameter 7.5 mm Colour Black What equipment is compatible with this cable? Any networking device, server, or rack appliance equipped with an IEC C14 power inlet, designed to connect directly into a PDU or UPS outlet featuring C13 ports. Can this cable plug directly into a standard wall socket? No. This is an IEC C14 to C13 extension power cable meant for rack infrastructure and PDUs, not direct connection to standard domestic wall receptacles. What is the maximum current rating? The cable is rated for up to 10 Amps at 250 Volts AC, making it ideal for standard networking switches, security appliances, and low-to-medium draw server configurations. Does the braided jacket help with cable routing? Yes, the braided exterior offers superior protection against sharp metal rack edges while reducing tangling and friction during high-density installations. Official Ubiquiti Stock 2-Year Manufacturer Warranty Aust-Wide Delivery

  Read more less

   

  $49.00

• 

  Ubiquiti Ubiquiti UACC-DoorCloser Adjustable Power Size 1-6 Mechanical Door Closer

   

  Ubiquiti UniFi Access · COMMERCIAL GRADE Ubiquiti UACC-DoorCloser Mechanical Access Control Solution Engineered for mission-critical commercial environments, the Ubiquiti UACC-DoorCloser delivers predictable, power-independent door closure designed to integrate perfectly with high-density enterprise access control ecosystems. Power Size Adjustable Size 1–6 Opening Angle Max 180° Sweep Build Rating ANSI/BHMA Grade 1 Compliance UL 228 & UL 10C Advanced Hydraulic Damping and Versatile Mounting Infrastructure Seamlessly pair your deployment workflow with our Ubiquiti UACC-DoorCloser unit, offering non-handed installation for both left- and right-handed swing configurations. Featuring dedicated adjustment channels for closing speed, latching velocity, and hydraulic back-check control, this device protects costly frames from structural impact damage under high-traffic conditions. Power-Independent Security Operates strictly via heavy-duty mechanical spring tension, ensuring reliable door closure during complete power outages or system downtime without relying on auxiliary electronic control lines. Multi-Configuration Setup Supports standard pull-side door mounts, push-side top jamb placements, and parallel arm bracket installations to accommodate specialized structural constraints across institutional buildings. Technical Specification Matrix Model UACC-DoorCloser Dimensions (Lock Body) 328 x 88.6 x 53.5 mm (12.9 x 3.5 x 2.1") Weight 3.3 kg (7.3 lb) Enclosure Material Aluminum alloy, carbon steel, hot-rolled steel; ABS deco cover Max. Door Opening Angle 180° Power Size Range Size 1–6 (Adjustable) Certifications UL 228, UL 10C, ANSI/BHMA A156.4 Grade 1, ANSI A117.1 ADA Application Mounts Standard Pull, Top Jamb Push, Parallel Arm Bracket (Size 1-5) Is the UACC-DoorCloser compatible with electronic access control setups? Yes. While operationally mechanical to ensure failsafe closing reliability, it functions alongside electric strikes, magnetic locks, and smart access hubs to finalize the security perimeter cycle. Can the opening force and closing velocity be fine-tuned? Absolutely. The unit features built-in valves for independent adjustment of closing speed, latching acceleration, and back-check resistance to match specific environmental wind pressures or heavy traffic demands. Does this model meet ADA compliance guidelines? Yes, it complies fully with ANSI A117.1 accessibility criteria, enabling smooth manual egress force thresholds required for public and commercial buildings. What mounting hardware configurations are supported out of the box? It supports standard pull-side door mounts, push-side top jamb installations, and parallel arm bracket configurations using the included structural hardware kit. Official Ubiquiti Stock Commercial Grade Warranty Fast Enterprise Delivery

  Read more less

   

  $265.10

• 

  Ubiquiti Ubiquiti POE-24-12W 24V DC 12W Gigabit PoE Injector — Surge Protection (Black)

   

  Ubiquiti PoE Adapter — NDAA Compliant Ubiquiti POE-24-12W — 24V DC 12W Gigabit PoE Injector with Surge Protection The Ubiquiti POE-24-12W is a genuine 24V DC, 12W passive PoE adapter that powers a single Ubiquiti device over a standard Ethernet run — no separate power outlet at the camera or access point. It features integrated surge and clamping protection, ESD/earth-grounding, and a power LED, helping shield your gear from electrical transients. Supplied with an earth-grounded AC cable in black, it is the reliable, drop-in replacement injector for compatible 24V Ubiquiti hardware. Genuine Ubiquiti stock with fast AU-wide shipping anywhere in Australia. Key Features 24V DC / 12W Passive PoE Delivers 24V DC at up to 12W over a single Ethernet cable to power compatible 24V Ubiquiti devices. Surge & Clamping Protection Built-in surge suppression and clamping help protect connected hardware from voltage spikes and transients. ESD / Earth Grounding An earth-grounded AC cable and ESD protection improve electrical safety and reliability on every install. Power LED & Genuine Stock A front power LED confirms output at a glance. Genuine Ubiquiti part, NDAA Section 889 compliant. Technical Specifications Model POE-24-12W Output Voltage 24V DC Output Power 12W (max) PoE Type Passive PoE adapter Protection Surge protection, clamping protection, maximum surge discharge, peak pulse current, ESD/earth grounding Indicator Power LED Cable AC cable with earth ground (included) Colour Black Compliance NDAA Section 889 compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $19.00

• 

  Ubiquiti Ubiquiti PoE Injector 24V 24W — POE-24-24W (NDAA, AU Cable)

   

  Genuine Ubiquiti — NDAA Compliant Ubiquiti PoE Injector 24V 24W (POE-24-24W) The Ubiquiti POE-24-24W is a 24 VDC, 24 W passive PoE injector that delivers power over a single Ethernet cable to compatible Ubiquiti 24V devices — ideal where a 24V PoE switch port isn't available. It includes earth grounding / ESD protection and a power LED, and ships with an Australian (AU) power cable. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Model POE-24-24W Output Voltage 24 VDC @ 1.0 A (24 W) Input Voltage 90–260 VAC @ 47–63 Hz Input Current 0.3 A @ 120 VAC • 0.2 A @ 230 VAC Efficiency 70%+ Output Ripple 1% max Switching Frequency 200 kHz Line Regulation ±0.5% Load Regulation ±1% Protection Earth grounding / ESD protection • power LED Power Cable Australian (AU) power cable included Operating Temperature −10°C to +60°C Storage Temperature −20°C to +85°C Operating Humidity 5% to 90% non-condensing Dimensions (L × W × H) 85 × 43 × 30 mm Compliance NDAA compliant 24V / 24W Passive PoE Delivers a clean 24 VDC @ 1.0 A (24 W) over Ethernet to power compatible Ubiquiti 24V hardware from a single cable run. Earth Grounding & ESD Protection Built-in earth grounding and ESD protection help shield connected gear from surges, with a front power LED for at-a-glance status. AU Cable, Wide Input Range Ships with an Australian power cable and accepts 90–260 VAC, ready to plug in straight out of the box anywhere in Australia. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $29.99

• Save -$1.16

  Ubiquiti Ubiquiti POE-24 Gigabit PoE Adapter — 24V DC PoE Injector with Surge Protection

   

  Ubiquiti — NDAA Compliant Ubiquiti POE-24 Gigabit PoE Adapter — 24V DC PoE Injector with Surge Protection The Ubiquiti POE-24 is a genuine 24V DC Gigabit PoE adapter that delivers both power and data to compatible Ubiquiti devices over a single Ethernet cable. Built with surge, clamping and ESD protection plus an AC cable with earth ground, it helps guard your equipment against the leading cause of outdoor device failures. NDAA Section 889 compliant and backed by genuine Ubiquiti stock, it ships fast Australia-wide from CCTV Guru. Output 24V DC LAN Port Gigabit Protection Surge & ESD Compliance NDAA 24V DC Gigabit Power Supplies 24V DC power and Gigabit data over a single Ethernet cable to compatible Ubiquiti devices — no separate power run required. Built-In Surge & ESD Protection Difference and common-mode surge protection, clamping protection (11V data, 60V power) and an earthed AC cable help defend against the leading cause of outdoor device failures. Remote Reset & Reset Button On-board reset button and remote reset capability make it easy to power-cycle and recover connected devices. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installations across Australia. Model Ubiquiti POE-24 (24V PoE Adapter) Output Voltage 24V DC Rated Input 100–240V AC @ 50/60 Hz LAN Port Gigabit (RJ45 shielded socket) Reset Reset button + remote reset capability Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power AC Connector IEC-320 C6 (earthed AC cable) Operating Temperature 0 to 40°C Certifications CE, FCC, IC, UL Compliance NDAA compliant POE-24 Datasheet (ui.com) Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $33.06 $31.90

• 

  Ubiquiti Ubiquiti Gigabit PoE++ Adapter 50V 60W (POE-50-60W)

   

  Genuine Ubiquiti PoE++ Adapter Ubiquiti Gigabit PoE++ Adapter — 50V 60W (POE-50-60W) The Ubiquiti POE-50-60W is a high-power 50VDC Gigabit PoE++ adapter that delivers up to 60 W (50V @ 1.2A) of power and data over a single Ethernet cable — ideal for powering airFiber radios, high-draw UniFi devices, and other 50V Ubiquiti hardware. With a Gigabit LAN port, four-pair powering, and built-in surge protection, it keeps your gear running reliably. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Model POE-50-60W (PoE++ Adapter) Output Voltage 50V DC @ 1.2A (60 W) Rated Input 100–240V AC @ 50/60Hz Input Current 1.3A @ 120V AC • 0.75A @ 230V AC Gigabit LAN Port Yes Powering 4-pair — Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (−) Data In / PoE RJ45 shielded socket AC Connector IEC-320 C6 Efficiency 85+% Surge Protection Difference & common mode • 1500A (8/20 μs) max surge discharge Clamping Protection 11V data, 60V power Dimensions / Weight 101 × 60 × 33 mm • 192 g Operating Temperature 0 to 40°C, 5–90% non-condensing Certifications CE, FCC, IC, UL 60W of 50V Power Delivers a full 50V DC @ 1.2A (60 W) over Ethernet to power demanding airFiber and 50V Ubiquiti hardware from a single outlet. Gigabit + 4-Pair Powering A Gigabit LAN port and four-pair powering carry both full-speed data and high-current power down one shielded RJ45 run. Built-In Surge Protection Difference and common-mode surge protection with up to 1500A discharge helps shield connected equipment from spikes. POE-50-60W Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $60.50

• Save -$5.98

  Ubiquiti Ubiquiti Fiber PoE G2 — Gigabit Outdoor Fiber-to-PoE Adapter (F-POE-G2)

   

  Ubiquiti Fiber PoE G2 — NDAA Compliant Ubiquiti Fiber PoE G2 — Gigabit Outdoor Fiber-to-PoE Adapter (F-POE-G2) The Ubiquiti Fiber PoE G2 (F-POE-G2) lets you power and connect a remote outdoor PoE device using fibre for data and a separate DC cable for power — ideal for long runs, lightning-prone sites, and locations where copper Ethernet would be impractical or vulnerable to surge. By keeping the data path on non-conductive fibre, the Fiber PoE G2 helps isolate sensitive networking gear from electrical surges while still delivering Gigabit throughput. Genuine Ubiquiti stock with fast Australia-wide shipping and expert Australian support. Gigabit Fibre Data Path Carries data over fibre for full Gigabit performance across distances far beyond copper Ethernet limits. Outdoor-Rated Housing Built for outdoor deployment so it can sit at the remote end of a link in tough Australian conditions. Surge Isolation by Design A non-conductive fibre data path helps isolate your switch and core gear from lightning-induced surges. NDAA Compliant Ubiquiti is a US-based manufacturer — suitable for government and security-sensitive installations. Technical Specifications Model F-POE-G2 Type Fiber-to-PoE adapter (data over fibre, power over DC) Data Rate Gigabit Deployment Outdoor Function Connects remote PoE devices, providing data via fibre and power via DC cabling Brand Ubiquiti Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $64.98 $59.00

• Save -$16.00

  Ubiquiti Ubiquiti UniFi Protect AI Theta Pro Lens Modules – Long-Distance / Wide-Angle / 360° Ceiling (ProLens)

   

  UniFi Protect — NDAA Compliant UniFi Protect AI Theta Pro Lens Modules — Long-Distance / Wide-Angle / 360° Ceiling Tailor your UniFi Protect AI Theta Pro system with the right optic for each location. These interchangeable 4K ProLens modules connect to the AI Theta Hub and flush-mount discreetly into walls and ceilings, each with enhanced low-light performance and dynamic range. Choose the Long-Distance (ProLens50) for focused, longer-range views, the Wide-Angle (ProLens110) for broad room coverage, or the 360° Ceiling (ProLens360) for full panoramic monitoring from a single point. Note: these lenses are indoor-only and require a UniFi Protect AI Theta Hub (UVC-AI-Theta-Hub, sold separately) to operate. Genuine Ubiquiti stock with fast Australia-wide shipping. Choose Your ProLens Long-Distance (UVC-AI-Theta-ProLens50) 4K, FOV H 53° / V 31° / D 60° — a narrower, focused field for longer-range views of corridors, aisles, and entries. Wide-Angle (UVC-AI-Theta-ProLens110) 4K, FOV H 110.4° / V 62.1° / D 126.6° — broad coverage of rooms, lobbies, and open areas. 360° Ceiling (UVC-AI-Theta-ProLens360) 4K (2160 × 2160, 1:1), 180° fisheye — full panoramic coverage of a whole space from a single ceiling point. 4K with Enhanced Low Light Each ProLens pairs an 8MP 1/1.8″ sensor with enhanced low-light performance and dynamic range for clean 4K footage at up to 24 FPS. Right Optic for the Job Mix and match across your AI Theta Pro deployment — long-distance for focused views, wide-angle for rooms, 360° for full-space ceilings. Discreet Flush Mounting Compact modules (⌀6.6 × 58.9 mm) flush-mount almost invisibly for a clean, design-led finish — ideal for interiors, hospitality, and retail. Powered by the AI Theta Hub The hub provides the AI engine, network, power, and recording — these lens modules add the eyes. The hub (UVC-AI-Theta-Hub) is sold separately. Technical Specifications Compatibility UniFi Protect AI Theta Hub (UVC-AI-Theta-Hub) — sold separately Long-Distance (ProLens50) UVC-AI-Theta-ProLens50 • 4K 8MP, 3840 × 2160 @ 24 FPS • FOV H 53° • 60 g Wide-Angle (ProLens110) UVC-AI-Theta-ProLens110 • 4K 8MP, 3840 × 2160 @ 24 FPS • FOV H 110.4° • 50 g 360° Ceiling (ProLens360) UVC-AI-Theta-ProLens360 • 4K, 2160 × 2160 (1:1) @ 24 FPS • 180° fisheye • 58 g Image Sensor 8 MP 1/1.8″ CMOS (all lenses) Lens Fixed focal length • enhanced low-light & dynamic range AI / Smart Detection Face recognition, number-plate recognition, people / vehicle / animal (via the AI Theta Hub) Power Connects to and is powered by the AI Theta Hub (Theta proprietary) • max 2.5 W per lens Dimensions ⌀6.6 × 58.9 mm (each) Operating Environment Indoor only • 0 to 40°C, 10–90% non-condensing Mounting Wall & ceiling mount included; angle mount optional Enclosure Aluminium alloy & polycarbonate Certifications CE, FCC, IC Downloads & Resources ProLens50 Datasheet ProLens110 Datasheet ProLens360 / AI Theta Pro Datasheet AI Theta Pro Quick Start Guide These ProLens modules require a UniFi Protect AI Theta Hub (UVC-AI-Theta-Hub) — sold separately. Indoor only; the hub connects via single-cable PoE to a UniFi Protect host (UNVR, Cloud Key+, Dream Machine, etc.). Choose Long-Distance for focused range, Wide-Angle for rooms, or 360° Ceiling for full-space coverage. Wall and ceiling mounts are included for a discreet finish; the angle mount is optional. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $289.00 - $309.00

• Save -$19.52

  Ubiquiti Ubiquiti UACC-ADAPTER-POE-USBC — PoE Adapter for Protect WiFi Cameras

   

  Genuine Ubiquiti · PoE Adapter · GigabitUbiquiti UACC-ADAPTER-POE-USBCTurn Your WiFi Protect Camera Into a Reliable Wired PoE Camera The Ubiquiti UACC-ADAPTER-POE-USBC transforms a Protect WiFi camera into a wired PoE device, delivering Gigabit Ethernet connectivity and steady power over a single cable. It's managed directly within the UniFi Protect app and is purpose-built for the G4 Instant and G4 Doorbell Pro. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It WiFi to wired PoE — converts a Protect WiFi camera into a wired PoE camera for rock-solid connectivity. Gigabit Ethernet — provides a GbE RJ45 data-in port with USB Type-C output to the camera. UniFi Protect managed — configured and monitored directly within the UniFi Protect application. Surge protected — ESD/EMP protection rated to ±4kV contact and ±8kV air for added resilience. Specifications Model UACC-ADAPTER-POE-USBC Category IP Security Camera Material Polycarbonate Dimensions (without cable) Ø30.4 x 95 mm Weight 85 g Cable Length 4.5 m Power PoE — Input 48V DC 0.25A, Output 5V DC 2A PoE Yes Ports Input RJ45 (GbE), Output USB Type-C Compatibility Camera G4 Instant (UVC-G4-INS), G4 Doorbell Pro (UVC-G4-Doorbell-Pro) Warranty 3 Years (AU) Frequently Asked Questions Which cameras is this adapter compatible with?It is designed for the Camera G4 Instant (UVC-G4-INS) and the G4 Doorbell Pro (UVC-G4-Doorbell-Pro). Does it include a network cable?The adapter provides a built-in 4.5 m cable. A separate run of Ethernet to your PoE switch is required. How does it connect to the camera?It takes a Gigabit RJ45 input and outputs power and data over USB Type-C to the camera. How is it managed?The adapter is managed through the UniFi Protect application alongside your other Protect devices.

  Read more less

   

  $128.51 $108.99

• 

  Ubiquiti Ubiquiti UACC-SSD-Tray UniFi Drive Caddy Adapter Tray

   

  Ubiquiti UniFi Accessories · NDAA COMPLIANT Toolless 2.5-Inch SSD Adapter Tray for UniFi Drive Bays Designed for seamless integration into UniFi storage arrays and NVR systems, the Ubiquiti UACC-SSD-Tray is a precision-engineered drive adapter tray that enables secure installation of 2.5-inch solid-state drives into standard 3.5-inch HDD drive bays. Built to ensure optimal drive alignment and stable thermal dissipation, this tray allows network administrators to upgrade UniFi Network Attached Storage (UNAS) and UniFi Protect NVR hardware with high-speed SSD media. Form Factor 2.5" to 3.5" Conversion Installation Toolless Drive Fitment Build Quality Durable Construction Compliance NDAA Compliant Precision Compatibility for UniFi Storage Hardware The UACC-SSD-Tray is tailored to fit UniFi Network Attached Storage units, Network Video Recorders (UNVR/UNVR-Pro), and Cloud Key Enterprise equipment. By converting 2.5-inch SATA SSDs into standard 3.5-inch drive bay footprints, it ensures proper SATA port alignment with internal backplanes while eliminating drive rattle and vibration during continuous operation. Perfect Backplane SATA Connector Alignment Precision-molded to place 2.5" SSD connectors in the exact physical location as standard 3.5" HDDs, guaranteeing effortless drive insertion and hot-swapping. Optimized Airflow Design Engineered with open ventilation slots to maintain consistent airflow around mounted solid-state drives during heavy read/write video recording workloads. Technical Specification Matrix Model UACC-SSD-Tray Supported Drive Size 2.5-Inch SATA SSDs / HDDs Target Bay Compatibility Standard 3.5-Inch UniFi Drive Caddies & Bays Mounting Type Toolless / Screw-Mount Support System Compatibility UNAS Series, UNVR, UNVR-Pro, Enterprise Systems Material High-Strength Molded Polymer Compliance NDAA Compliant Will this tray fit into standard UniFi UNVR and UNAS drive caddies? Yes, the UACC-SSD-Tray is specifically designed to adapt 2.5-inch SSDs to fit standard 3.5-inch UniFi HDD caddies and backplanes. Do I need tools or screws to install the 2.5-inch SSD into the tray? The tray features an intuitive mounting mechanism that allows quick, secure installation of 2.5-inch solid-state drives without hassle. Is the Ubiquiti UACC-SSD-Tray NDAA compliant? Yes, the UACC-SSD-Tray is fully NDAA compliant and suitable for commercial, enterprise, and public sector deployments. Does this adapter tray work with both SSDs and 2.5-inch laptop HDDs? Yes, it supports any standard 2.5-inch SATA form-factor drive, including solid-state drives and traditional 2.5-inch mechanical hard drives. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $45.00

• 

  Ubiquiti Ubiquiti Rack Mount OCD Panel Brush (UACC-Rack-Panel-Brush-1U)

   

  Ubiquiti Rack Accessories · NDAA COMPLIANT Clean Cable Routing & Optimized Server Rack Thermal Management The UACC-Rack-Panel-OCD (1U Brush / Blank Rack Panel) is a premium cable management and airflow control accessory designed for standard 19-inch server racks. Featuring high-density protective brush bristles, it allows patch cords and optical cables to pass cleanly between front and rear rack compartments while blocking unwanted thermal bypass. Built to maintain structured cabling integrity, it prevents dust accumulation and keeps high-density networking installations visually pristine. Form Factor 1U 19-Inch Standard Rack Mount Cable Protection High-Density Brush Strip Airflow Control Thermal Bypass Reduction Aesthetic Match UniFi Uniform Metallic Finish Professional Aesthetic & Equipment Dust Defense Engineered for IT managers and systems integrators who value clean installation standards, the UACC-Rack-Panel-OCD seamlessly integrates alongside UniFi enterprise switches and gateways. Its dense bristle opening accommodates Ethernet, DAC, and optical fiber cables without applying crimping pressure, while simultaneously sealing empty rack spaces to prevent dust ingress and ensure predictable intake-to-exhaust thermal management. High-Density Cable Pass-Through Prevents cable strain and snagging by allowing RJ45 patch leads, fiber jumpers, and power cables to pass cleanly between front and back rack zones. Improved Rack Thermal Efficiency Helps maintain proper hot/cold aisle separation by sealing unused 1U rack spaces and preventing hot air recirculating to active switch intakes. OEM Matching Design Language Crafted with a sleek metallic silver finish that aligns perfectly with UniFi switches, patch panels, and gateway chassis for a unified rack appearance. Universal 19" EIA-310 Compliance Designed to fit seamlessly into any standard 19-inch equipment rack, server cabinet, or wall-mount enclosure. Technical Specification Matrix Model UACC-Rack-Panel-Brush-1U Rack Space Height 1U Supported Rack Standard 19-Inch (EIA-310) Standard Racks Pass-Through Type High-Density Nylon Brush Strip Body Materials Galvanized Steel Frame & Synthetic Bristles Color & Finish Ubiquiti Metallic Silver Dimensions 442 x 43.7 x 12.5 mm (17.4 x 1.7 x 0.5") Is the Ubiquiti UACC-Rack-Panel-OCD (Brush-1U) NDAA compliant? Yes. The UACC-Rack-Panel-Brush-1U panel is explicitly certified as NDAA compliant, making it approved for federal, defense, municipal, and commercial IT infrastructure projects. What is the main benefit of using a brush panel over a solid blanking panel? A brush panel allows you to route patch cables between the front and back of your server rack while maintaining a sealed appearance and preventing thermal air short-circuiting. Will this brush panel fit non-Ubiquiti server racks? Yes. The panel adheres to universal 19-inch EIA-310 mounting specifications, making it compatible with standard square-hole and threaded network racks. Does the brush strip damage fiber optic or Ethernet cables? No. The flexible nylon bristles conform gently around incoming cables, providing protective pass-through without putting pressure on cable jackets or bend radiuses. Official Ubiquiti Stock NDAA Compliant Certified Aust-Wide Delivery

  Read more less

   

  $96.80

• 

  Ubiquiti Ubiquiti UACC-Keystone-Blank-Insert Rackmount Blank (24 Pack)

   

  Ubiquiti UniFi · NDAA COMPLIANT Seamless Rack Aesthetics with Snap-In Keystone Blanks The Ubiquiti UACC-Keystone-Blank-Insert is a simple yet essential rack accessory designed to conceal unused keystone ports on standard modular patch panels. Engineered to match the premium aesthetic of the UniFi networking ecosystem, these blank inserts provide a clean, uniform, and professional look for enterprise server racks and home lab AV cabinets. Beyond upgrading your rack's visual appeal, they actively prevent dust accumulation and improve thermal airflow management by safely sealing off open, unpopulated panel slots. Compatibility Standard Keystone Panels Installation Toolless Snap-In Function Dust & Airflow Control Compliance NDAA Compliant Professional Polish for Enterprise and Home Lab Racks Built for seamless integration with Ubiquiti's 24-port and 48-port blank patch panels, the UACC-Keystone-Blank-Insert delivers a high-end finish to any IT deployment. Whether you are staging a panel for future cable expansion or simply seeking to hide unpopulated ports, the robust snap-in retention mechanism ensures a secure fit that won't vibrate loose over time, maintaining the signature UniFi visual standard across your entire networking stack. Toolless Snap-In Installation Features ergonomic retention tabs that allow for immediate insertion and removal without the need for punch-down tools, screwdrivers, or specialized rack hardware. Dust & Thermal Protection Closes off empty keystone ports, significantly reducing dust ingress into the rack cabinet while preventing internal server exhaust air from bypassing proper front-to-back airflow routes. Technical Specification Matrix Model UACC-Keystone-Blank-Insert Supported Hardware UniFi Rackmount Blank Patch Panels (24/48-Port) Form Factor Standard RJ45 Keystone Footprint Installation Toolless Snap-In / Snap-Out Material Durable Polycarbonate Certifications NDAA Compliant (Note: Not TAA Compliant) Environment Indoor Enterprise Rack / Data Center Color / Finish UniFi White / Silver Blend Will these fit in standard third-party keystone patch panels? Yes. While engineered to perfectly match the color and aesthetic of UniFi rackmount blank patch panels, these utilize standard keystone sizing and will securely snap into most standard modular third-party panels. Do I need specialized tools to remove the blanks later? No tools are required. The inserts feature standard retention tabs that easily depress with your fingers, allowing for quick removal when you are ready to populate the port with an active keystone jack. Are these inserts NDAA and TAA compliant? The UACC-Keystone-Blank-Insert is NDAA compliant, making it suitable for secure facilities. However, it is generally not TAA compliant. Why should I use blank inserts instead of leaving ports open? Blank inserts serve two major functions: they provide a clean, finished aesthetic to your rack setup, and they physically block dust and debris while helping maintain proper rack airflow dynamics by eliminating air gaps. Official Ubiquiti Stock Commercial Warranty Aust-Wide Delivery

  Read more less

   

  $45.10

• 

  Ubiquiti Ubiquiti Multi-Mode Optical Fiber Cable 1M, 2M, 3M

   

  Ubiquiti UniFi · NDAA COMPLIANT Ultra-Thin Multi-Mode Optical Interconnect for High-Speed Rack Networks The Ubiquiti UACC-OFC-MM is a lightweight, ultra-thin 1/ 2 and 3 meter multi-mode optical fiber patch cable engineered for ultra-fast 10 Gbps switch-to-switch and server interconnects. Designed to fit high-density rack environments, this fiber patch cable features a flexible outer jacket with an extremely small outer diameter that dramatically improves rack airflow, reduces conduit clutter, and simplifies cable management across enterprise racks and data centers. Cable Length 1, 2, 3 Meter Fiber Type Multi-Mode Optical (LC-LC) Data Speed 10 Gbps Throughput Compliance NDAA Compliant Flexible Sizing for Scalable Enterprise Infrastructure Engineered for zero signal attenuation and low insertion loss, the UACC-OFC-MM-1M delivers reliable, noise-free fiber connectivity between UniFi switches, security gateways, and enterprise servers. To accommodate diverse rack layouts, patching distances, and cable tray routing, this multi-mode optical family is also available in 2-meter (UACC-OFC-MM-2M) and 3-meter (UACC-OFC-MM-3M) configurations, allowing network architects to maintain uniform cabling standards across every tier of their network deployment. Ultra-Thin Profile for Enhanced Airflow Features an exceptionally compact outer cable jacket designed to maximize thermal cooling and ventilation inside crowded server racks while eliminating cable strain on delicate SFP+ transceivers. High-Speed Multi-Mode Reliability Precision-molded LC duplex connectors deliver consistent 10G optical performance, making it an ideal choice for short-reach, high-bandwidth connections between core switches and aggregated devices. Technical Specification Matrix Model UACC-OFC-MM-1M / 2M / 3M Supported Speeds 10 Gbps Multi-Mode Transmission Cable Length Options 1m (UACC-OFC-MM-1M), 2m (UACC-OFC-MM-2M), 3m (UACC-OFC-MM-3M) Connector Type LC Duplex to LC Duplex Fiber Mode Multi-Mode Optical Fiber Jacket Style Ultra-Thin, High-Flexibility Jacket Certifications NDAA Compliant Environment Indoor Enterprise Rack / Data Center Is the UACC-OFC-MM-1M compatible with standard SFP+ optical transceivers? Yes. This multi-mode fiber patch cable utilizes industry-standard LC duplex connectors that plug directly into multi-mode SFP+ and SFP28 transceivers across UniFi and third-party networking hardware. Are longer lengths available if 1 meter is too short? Yes. In addition to the 1-meter UACC-OFC-MM-1M, Ubiquiti offers matching 2-meter (UACC-OFC-MM-2M) and 3-meter (UACC-OFC-MM-3M) variants to fit larger rack cabinets and cross-rack patching requirements. Is this optical cable NDAA compliant? Yes, the UACC-OFC-MM-1M (along with its 2M and 3M variants) is fully NDAA compliant and approved for use in government, military, and enterprise IT infrastructures. Can this cable be used for single-mode optical transceivers? No. This is a multi-mode optical cable. Single-mode transceivers require dedicated single-mode fiber cables (such as single-mode LC patch cords) to function correctly. Official Ubiquiti Stock Commercial Warranty Aust-Wide Delivery

  Read more less

   

  $19.80 - $22.00

• 

  Ubiquiti Ubiquiti AI Theta Audio Interconnect Cable (UACC-AI-Theta-Audio-Cable-1M)

   

  Ubiquiti UniFi · NDAA COMPLIANT High-Fidelity Interconnect for UniFi AI Theta Audio Modules The Ubiquiti UACC-AI-Theta-Audio-Cable-1M is a specialized 1-meter high-performance interconnect cable designed to connect AI Theta audio modules to the UniFi AI Theta central processing hub. Engineered for low-latency transmission and crystal-clear 2-way audio communication, this ultra-flexible cable simplifies discreet installations in luxury retail, commercial offices, and high-security enterprise environments. Designed to route smoothly through tight plenum spaces and architectural cutouts, it ensures reliable signal integrity without audio distortion or RF interference. Cable Length 1 Meter (3.3 ft) Compatibility AI Theta Audio Module Signal Quality Shielded Low-Noise Link Compliance NDAA Compliant Modular Flexibility Across the AI Theta Ecosystem Part of Ubiquiti's modular security architecture, the Ubiquiti UACC-AI-Theta-Audio-Cable-1M allows security installers to locate audio speakers and microphones independently from optical lenses and the central processing unit. Whether deployed alongside standard video connections or specialized extension cables—such as the UACC-AI-Theta-Video-Cable-1M or the long-reach UACC-AI-Theta-Video-Cable-Ext-5M—this heavy-duty shielded cable preserves clean audio capture for two-way intercom and environmental noise monitoring. Interference-Shielded Audio Transfer Built with high-density internal shielding to prevent electromagnetic interference (EMI) from electrical conduits and ceiling light fixtures, delivering crisp and audible mic pick-up in noisy settings. Ultra-Slim Flexible Sheathing Features a thin, flexible outer jacket designed specifically for effortless snake-routing through narrow wall gaps, drop ceiling grids, and tight architectural conduit channels. Technical Specification Matrix Model UACC-AI-Theta-Audio-Cable-1M Supported Hardware UniFi AI Theta Processing Hub & Audio Module Cable Length 1 Meter (3.3 feet) Connector Type Proprietary AI Theta Audio Interconnect Jacket Type Flexible, Flame-Retardant PVC Certifications NDAA Compliant Environment Indoor Commercial Architecture Color / Finish White Can the UACC-AI-Theta-Audio-Cable-1M be used for video lens connections? No. This cable is specifically pinned and optimized for AI Theta audio modules. Video lenses require dedicated cables such as the UACC-AI-Theta-Video-Cable-1M or UACC-AI-Theta-Video-Cable-Ext-5M. Can I extend this audio cable beyond 1 meter? To preserve signal integrity and avoid audio degradation, it is recommended to use the official 1-meter cable directly between the AI Theta Hub and the audio module without third-party extension couplers. Is this interconnect cable NDAA compliant? Yes, the UACC-AI-Theta-Audio-Cable-1M is fully NDAA compliant and approved for use in government, military, and strict commercial installations. Does this cable come included with the AI Theta system? While standard packages include essential cabling, the UACC-AI-Theta-Audio-Cable-1M is available as a replacement or modular spare for custom architectural layouts. Official Ubiquiti Stock Commercial Warranty Aust-Wide Delivery

  Read more less

   

  $81.40

• 

  Ubiquiti Ubiquiti AI Theta Video Interconnect Cable

   

  Ubiquiti UniFi · NDAA COMPLIANT Ultra-Flexible 4K Video Transmission for UniFi AI Theta The Ubiquiti UACC-AI-Theta-Video-Cable is a specialized 1-meter high-bandwidth video interconnect cable engineered exclusively to link AI Theta optical lens modules directly to the UniFi AI Theta central processing hub. Designed to support uncompressed 4K video streams with ultra-low latency, this heavy-duty yet flexible cable enables sleek, recessed optical installations across architectural ceilings and wall spaces. Its thin-profile design ensures smooth conduit snaking without compromising signal integrity or electromagnetic immunity. Cable Length 1Meter and 5Meter Extension Compatibility AI Theta Lens Modules Data Transport High-Bandwidth 4K Link Compliance NDAA Compliant Modular Flexibility Across the AI Theta Ecosystem Built as an essential component of Ubiquiti's modular surveillance system, the Ubiquiti UACC-AI-Theta-Video-Cable-1M provides the clean physical separation needed between discreet optical sensors and core processing hardware. For extended-reach installations, systems can be outfitted with the UACC-AI-Theta-Video-Cable-Ext-5M, while audio modules are integrated seamlessly using the companion UACC-AI-Theta-Audio-Cable-1M. High-density internal shielding prevents video artifacts and EMI noise, delivering continuous, reliable surveillance feeds to UniFi Protect. Zero-Latency Video Routing Engineered specifically for high-speed differential signal transmission, preserving full-frame 4K resolution and wide dynamic range (WDR) performance from AI Theta optical lenses without signal drop. Architectural-Grade Flexibility Constructed with a tight bend radius and a durable, low-friction sheath, allowing fast and secure pulls through commercial conduits, acoustic ceiling tiles, and wall cavities. Technical Specification Matrix Model UACC-AI-Theta-Video-Cable-1M / Extension-5M Supported Hardware UniFi AI Theta Hub & Optical Lens Modules Cable Length 1 Meter / Extension 5 Meter Connector Type Proprietary AI Theta High-Speed Video Interconnect Jacket Rating Flexible, Flame-Retardant Commercial PVC Certifications NDAA Compliant Environment Indoor Commercial / Enterprise Architectural Color / Finish White Can I use this cable to connect an AI Theta audio module? No. This cable is specifically wired for high-speed 4K video transmission from lens modules. Audio modules require the dedicated UACC-AI-Theta-Audio-Cable. Is a longer version available for distant lens mounting? Yes. If your installation requires a longer cable path between the processing hub and lens, the 5-meter UACC-AI-Theta-Video-Cable-Ext-5M is available for extended reach. Is the UACC-AI-Theta-Video-Cable NDAA compliant? Yes, the UACC-AI-Theta-Video-Cable is fully NDAA compliant and meets compliance standards for government, military, and strict enterprise projects. Can I daisy-chain multiple 1M cables together? No. To ensure optimal video signal integrity and prevent data loss, always use a single continuous official cable (1M or 5M) between the lens and the hub. Official Ubiquiti Stock Commercial Warranty Aust-Wide Delivery

  Read more less

   

  $62.70 - $196.90

• 

  Ubiquiti Ubiquiti UniFi Access Elevator Starter Kit (UA-SK-Elevator)

   

  Ubiquiti UNIFI ACCESS · NDAA COMPLIANT Comprehensive Multi-Floor Access Control for Modern Facilities The Ubiquiti UA-SK-Elevator is an all-in-one access control starter kit engineered to manage secure floor destination dispatching in commercial, residential, and multi-tenant buildings. Powered by the UniFi Access application, this enterprise solution streamlines floor-by-floor permissions, credential validation, and real-time entry logs without high recurring license fees. Application Elevator Access Authentication NFC / Mobile / PIN Power Input PoE Network Driven Compliance NDAA Compliant Seamless System Integration & Management By deploying the Ubiquiti UA-SK-Elevator, building managers can grant level-specific clearances based on user schedules, job roles, or temporary visitor access. Integrated seamlessly with UniFi Identity, employees can swipe keycards or use mobile devices inside elevator cabs, maintaining complete oversight over restricted floors throughout your facility. Granular Floor Security Assign customized floor destination rights per individual or group, restricting unauthorized entry to executive suites, residential floors, or sensitive operational areas. Unified Access Management Manage elevator access alongside doors, gates, and surveillance feeds within a single intuitive, license-free UniFi Access platform dashboard. Technical Specification Matrix Model UA-SK-Elevator Series Ubiquiti UniFi Access Systems Primary Application Elevator Floor Destination Access Control Supported Credentials NFC Cards, Key Fobs, Mobile Tap, PIN Code System Architecture PoE Managed Network Access Controller Management Software UniFi Access Application Relay Capabilities Multi-Floor Elevator Controller Inputs/Outputs Regulatory Compliance NDAA Compliant How does the UniFi Access Elevator Kit control floor selection? The kit interfaces directly with the elevator cabinet's call panel relays, activating specific floor buttons only after valid credential verification. Are ongoing software subscription fees required for this kit? No, UniFi Access runs locally on UniFi OS Consoles without mandatory cloud or user licensing subscriptions. Which credentials are supported by the readers in this kit? The system supports UniFi Access Cards, custom encrypted NFC tags, mobile credentials via Apple/Android devices, and PIN authentication. Is this elevator access kit NDAA compliant? Yes, the UA-SK-Elevator kit is NDAA compliant and suitable for commercial installations with federal compliance standards. Official Ubiquiti Stock NDAA Compliant Aust-Wide Delivery

  Read more less

   

  $1,824.90

• 

  Ubiquiti Ubiquiti Gang Box Mount Plate (UACC-G4 Doorbell Pro PoE-Gang Box)

   

  Ubiquiti UNIFI ACCESSORIES · NDAA COMPLIANT Professional Mounting Adapter for Standard Electrical Boxes The Ubiquiti UACC-G4-Doorbell-Pro-PoE-Gang-Box is an official mounting plate engineered specifically to secure your UniFi G4 Doorbell Pro PoE directly to standard US electrical gang boxes. Perfect for commercial installations, multi-tenant properties, and modern residential builds, this accessory provides a clean, seamless flush mount while utilizing existing electrical conduit infrastructure. Compatibility G4 Doorbell Pro PoE Construction Aluminum Alloy Box Standard Single Gang Box Compliance NDAA Compliant Seamless Commercial Integration & Durability Built from high-durability aluminum alloy, the Ubiquiti UACC-G4-Doorbell-Pro-PoE-Gang-Box ensures structural rigidity and long-term reliability in demanding environments. It aligns directly with single-gang electrical wall boxes to streamline installation during retrofit or new construction projects, keeping wiring concealed and secure behind a finished architectural aesthetic. Simplified Electrical Retrofitting Designed to fit pre-existing standard single-gang electrical junction boxes, eliminating the need for custom drywall cutting or specialized masonry work during commercial upgrades. Rugged Metal Architecture Constructed with premium aluminum alloy components for physical protection, vandal resistance, and long-lasting stability under varied thermal conditions. Technical Specification Matrix Model UACC-G4-Doorbell-Pro-PoE-Gang-Box Compatibility Ubiquiti UniFi Protect G4 Doorbell Pro PoE Enclosure Material Aluminum Alloy Supported Junction Box Standard US Single-Gang Box Dimensions 132 x 58 x 12 mm (5.2 x 2.3 x 0.5") Weight 85 g (3.0 oz) Mounting Type Surface / Gang Box Wall Mount Regulatory Compliance NDAA Compliant Is this mount compatible with the standard Wi-Fi G4 Doorbell Pro? No, this gang box mounting adapter is exclusively designed for the UniFi G4 Doorbell Pro PoE model due to dimensional and cable routing differences. What size junction box does this adapter mount onto? It is engineered to align with standard US single-gang electrical junction boxes for quick, secure installation. Is the gang box mount suitable for outdoor installations? Yes, constructed from durable aluminum alloy, it resists weather degradation when properly sealed against the exterior mounting wall. Is this product NDAA compliant? Yes, the UACC-G4-Doorbell-Pro-PoE-Gang-Box is NDAA compliant and suitable for commercial installations requiring NDAA adherence. Official Ubiquiti Stock NDAA Compliant Aust-Wide Delivery

  Read more less

   

  $91.30

• 

  Ubiquiti Ubiquiti SFP28 25G Direct Attach Cable (DAC) — 0.5m, 1m, 3m

   

  Ubiquiti Accessories Series · NDAA COMPLIANT Next-Gen 25Gbps High-Speed Interconnect for Enterprise Rack Stacking The Ubiquiti UACC-DAC-SFP28 is an NDAA compliant, ultra-high-performance 25 Gbps Direct Attach Copper (DAC) cable engineered for short-distance, multi-gigabit interconnectivity within enterprise data centers, government server rooms, and high-density network racks. Measuring 0.5 meters, 1m and 3m this passive SFP28 to SFP28 twinax cable provides an energy-efficient, sub-nanosecond latency alternative to optical transceivers when connecting adjacent UniFi Enterprise switches, high-speed gateways, and enterprise storage arrays. Data Rate 25 Gbps Throughput Interface SFP28 to SFP28 Connectors Cable Length 0.5m, 1m, 3m Assembly Type Passive Twinax Copper Hot-Swappable Plug-and-Play Integration & Maximum Thermal Efficiency Designed to eliminate optical conversion overhead while drastically reducing system power consumption, the UACC-DAC-SFP28 features factory-terminated SFP28 connector assemblies on both ends for instant plug-and-play operation. Its highly flexible twinax copper core enables tight bend radii inside crowded 19-inch equipment racks, making it the ideal patch solution for high-throughput backbone links, core aggregation switches, and server uplinks. Ultra-Short 25G In-Rack Stacking Optimized 0.5, 1m,3-meter physical length prevents cable clutter and maximizes airflow across dense switch chassis, ensuring clean 25Gbps connectivity between vertically adjacent devices. Zero Power Draw Passive Design Operates passively without active processing components, consuming zero additional power compared to optical transceivers and keeping overall cabinet thermal output to a minimum. Technical Specification Matrix Model UACC-DAC-SFP28-0.5m / 1m / 3m NDAA Compliance Confirmed Compliant (Yes) Connector Type SFP28 to SFP28 Maximum Data Rate 25 Gbps (Backward compatible with 10Gbps SFP+) Cable Length 0.5m, 1m, 3m Cable Type Passive Twinax Copper Jacket Material & Color PVC, Black / Ultra-Flexible Outer Shielding Operating Temperature 0°C to 70°C (32°F to 158°F) Compatibility Ubiquiti UniFi Enterprise Switches, Aggregation Units, and standard 25G SFP28 ports Is the Ubiquiti UACC-DAC-SFP28 NDAA compliant? Yes, as a passive copper interconnect containing no microcontrollers or prohibited vendor hardware, it fully satisfies NDAA Section 889 requirements for government and enterprise deployments. Is the UACC-DAC-SFP28-0.5M,1M, 3M backward compatible with 10Gbps SFP+ ports? Yes, SFP28 connectors share the same physical form factor as SFP+ ports and can operate at 10Gbps if supported and configured on the switch hardware. What is the latency advantage of 25G DAC twinax over fiber transceivers? Direct Attach Copper (DAC) cables process transmission signals passively without needing optical-to-electrical conversions, offering sub-nanosecond latency ideal for high-throughput server and switch links. Does this 25G cable require separate SFP28 transceiver modules? No, the SFP28 connectors are permanently integrated onto each end of the twinax copper cable for seamless, hot-swappable plug-and-play installation. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $56.10 - $91.30

• 

  Ubiquiti Ubiquiti SFP+ 10G Direct Attach Cable (DAC) — 0.5m, 1m

   

  Ubiquiti Accessories Series · NDAA & COMPLIANT Ultra-Low Latency 10Gbps Interconnect for In-Rack Network Stacking The Ubiquiti UACC-DAC-SFP10 is an NDAA and compliant, high-performance 10 Gbps Direct Attach Copper (DAC) cable designed for short-distance, high-speed interconnectivity within enterprise racks, government network setups, and data centers. Measuring 0.5 meters (1.6 ft), this passive SFP+ to SFP+ twinax cable provides an energy-efficient, low-latency alternative to optical transceivers when connecting adjacent UniFi switches, aggregation routers, and network storage systems. Data Rate 10 Gbps Throughput Interface SFP+ to SFP+ Connectors Cable Length 0.5 m (1.6 ft) Assembly Type Passive Twinax Copper Seamless Plug-and-Play Integration & Thermal Efficiency Engineered to reduce operational power consumption and eliminate optical conversion overhead, the Ubiquiti UACC-DAC-SFP10 features factory-terminated SFP+ connector assemblies on both ends for instant hot-swappable installation. Its flexible copper jacket allows for tight bend radii within crowded equipment racks, making it an ideal choice for high-density core switch stacking, gateway links, and high-throughput UniFi Protect NVR backbones. Ultra-Short In-Rack Stacking Optimized 0.5-meter length prevents cable clutter and reduces airflow obstruction inside rack enclosures, delivering clean connectivity between vertically adjacent devices. Energy-Efficient Passive Operation Draws virtually zero electrical power compared to active optical transceivers, lowering overall thermal output and reducing operating costs in multi-switch environments. Technical Specification Matrix Model UACC-DAC-SFP10-0.5M, 1M NDAA Compliance Confirmed Compliant (Yes) Connector Type SFP+ to SFP+ Maximum Data Rate 10 Gbps Cable Length 0.5m, 1m Cable Type Passive Twinax Copper Jacket Material & Color PVC, Black / Ultra-Flexible Outer Shielding Operating Temperature 0°C to 70°C (32°F to 158°F) Compatibility Ubiquiti UniFi Switches, Routers, Aggregation Units, and standard SFP+ ports Is the Ubiquiti UACC-DAC-SFP10 NDAA compliant? Yes, as a passive copper interconnect containing no active processors or prohibited vendor technology, it fully complies with NDAA Section 889 guidelines for U.S. federal and government infrastructure projects. Is the Ubiquiti UACC-DAC-SFP10 compatible with standard SFP+ switch ports? Yes, it uses industry-standard SFP+ connector ends and is designed for seamless plug-and-play operation across Ubiquiti UniFi switches, routers, and third-party devices with 10G SFP+ ports. What is the primary advantage of a DAC cable over optical transceivers? Direct Attach Copper (DAC) cables offer significantly lower latency, consume virtually zero additional power, and are more cost-effective for short-distance connections within the same server rack. Does this cable require additional SFP optical modules or fiber patches? No, the connectors are integrated permanently onto each end of the copper cable, requiring no additional transceivers or fiber optics. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $40.70

• 

  Ubiquiti Ubiquiti UniFi UACC-Cable-C6A-CMP Cat6A CMP Indoor Cable – 305m

   

  Ubiquiti UniFi · Indoor Cat6A cable Ubiquiti UniFi Indoor Cat6A CMP Cable The Ubiquiti UACC-Cable-C6A-CMP is a 305 m Category 6A bulk Ethernet cable for indoor structured-cabling installations. It uses four twisted pairs of 23 AWG solid bare-copper conductors and includes an internal divider to help control crosstalk. Its flame-retardant PVC jacket carries a CMP flame rating tested to NFPA 262. The cable is unshielded twisted pair (UTP), with a white 6.7 mm jacket, integrated ripcord and minimum bend radius of 26.8 mm. Cable category Cat6A UTP Cable length 305 m (1,000 ft) Flame rating CMP · NFPA 262 Conductors 23 AWG solid copper Construction and installation Unshielded Cat6A construction Four colour-coded twisted pairs, an anti-crosstalk divider and solid bare-copper conductors provide a structured-cabling foundation for compatible Cat6A installations. Indoor CMP-rated jacket The flame-retardant PVC jacket is CMP rated and tested to NFPA 262. Ubiquiti specifies this cable for indoor use. Technical specifications Manufacturer Ubiquiti Product name UniFi Indoor Cable Cat6A CMP Model UACC-Cable-C6A-CMP Category Category 6A Length 305 m (1,000 ft) Environment Indoor Shielding UTP Conductors 23 AWG solid bare copper Pair construction Four colour-coded twisted pairs Jacket material Flame-retardant polyvinyl chloride (FRPVC) Jacket colour White Jacket diameter 6.7 ± 0.2 mm Minimum bend radius 26.8 mm Flame rating CMP Flame test NFPA 262 Installation temperature 0°C to 60°C Operating temperature −20°C to 75°C Storage temperature −20°C to 75°C Box dimensions 494 × 302 × 481 mm Box weight 21.3 kg Included features Anti-crosstalk divider and ripcord Standards listed by Ubiquiti ANSI/TIA-568.2-D ISO/IEC 11801-1, Edition 2.2 IEC 61156-5, Edition 2.1 NFPA 262 UL 444 CSA 22.2 No. 214 EU Directive 2011/65/EU (RoHS 2) Frequently asked questions Is this cable shielded? No. Ubiquiti identifies it as an unshielded twisted-pair cable (UTP). Is it suitable for outdoor installation? No. Ubiquiti specifies this model for indoor use. Does it contain copper-clad aluminium? No. Ubiquiti specifies 23 AWG solid bare-copper conductors. Does the cable support 10 Gigabit Ethernet? Category 6A is the recognised cabling category used for 10 Gigabit Ethernet channels when the complete installed channel, including its terminations, components, length and workmanship, meets the applicable Cat6A requirements. Australian installation note CMP is a North American cable flame classification. Before using this product in fixed or concealed cabling in Australia, confirm that the product and proposed installation satisfy applicable ACMA requirements, Australian cabling standards and project-specific fire or building requirements. Regulated cabling work must be completed by an appropriately registered cabler.

  Read more less

   

  $1,049.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable — Outdoor Weatherproof Cat5e RJ45 (Choose Colour & Length)

   

  UniFi — NDAA Compliant UniFi Outdoor Weatherproof Cat5e Patch Cable — Choose Colour & Length The Ubiquiti UniFi outdoor patch cable is an all-weather, shielded Cat5e RJ45 lead with a UV-resistant TPE jacket — built to run between buildings, to outdoor APs, and to exposed cameras. Available in White and Black across multiple lengths. Choose your colour and length from the options above. Genuine Ubiquiti stock with fast Australia-wide shipping. Type Outdoor shielded Cat5e RJ45 Ethernet patch cable Jacket UV-resistant TPE, all-weather Colours White / Black Lengths 1 m, 2 m, 3 m, 5 m, 8 m Compliance NDAA compliant Ubiquiti Model SKUs UACC-Cable-Patch-Outdoor-1M-W, UACC-Cable-Patch-Outdoor-2M-W, UACC-Cable-Patch-Outdoor-3M-W, UACC-Cable-Patch-Outdoor-5M-W, UACC-Cable-Patch-Outdoor-8M-W, UACC-Cable-Patch-Outdoor-1M-BK, UACC-Cable-Patch-Outdoor-2M-BK, UACC-Cable-Patch-Outdoor-3M-BK, UACC-Cable-Patch-Outdoor-5M-BK, UACC-Cable-Patch-Outdoor-8M-BK Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $12.00 - $25.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable — Ultra-Thin Cat6 RJ45 (Indoor, Choose Colour & Length)

   

  UniFi — NDAA Compliant UniFi Ultra-Thin Cat6 Patch Cable — Choose Colour & Length The Ubiquiti UniFi ultra-thin Cat6 patch cable is just 3 mm thick with both ends bendable to 90° and booted RJ45 connectors — perfect for tidy, low-profile runs behind racks, switches, and APs. Available in White, Blue and Black across multiple lengths. Choose your colour and length from the options above. Genuine Ubiquiti stock with fast Australia-wide shipping. Type Cat6 RJ45 Ethernet patch cable, ultra-thin 3 mm Connectors Booted RJ45, both ends bendable to 90° Colours White / Blue / Black Lengths 0.22 m, 1 m, 2 m, 3 m, 5 m (plus 0.22 m 50-pack in White) Compliance NDAA compliant Ubiquiti Model SKUs U-CABLE-PATCH-RJ45, U-CABLE-PATCH-1M-RJ45, U-CABLE-PATCH-2M-RJ45, U-CABLE-PATCH-3M-RJ45, U-CABLE-PATCH-5M-RJ45, U-Cable-Patch-RJ45-50, U-CABLE-PATCH-RJ45-BL, U-CABLE-PATCH-1M-RJ45-BL, U-CABLE-PATCH-2M-RJ45-BL, U-CABLE-PATCH-3M-RJ45-BL, U-CABLE-PATCH-5M-RJ45-BL, U-CABLE-PATCH-RJ45-BK, U-CABLE-PATCH-1M-RJ45-BK, U-CABLE-PATCH-2M-RJ45-BK, U-CABLE-PATCH-3M-RJ45-BK, U-CABLE-PATCH-5M-RJ45-BK Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $6.95 - $214.00

• Save -$6.75

  Ubiquiti Ubiquiti UACC-Uplink-SFP28 Direct Attach Cable 3M - UniFi 25G/10G/1G Auto Link Optimisation

   

  UniFi Accessory — NDAA Compliant Ubiquiti UACC-Uplink-SFP28 Direct Attach Cable — 3 m (25G / 10G / 1G Auto Link Optimisation) The Ubiquiti UACC-Uplink-SFP28 is a high-performance direct attach cable for UniFi networks, with Auto Link Optimization that negotiates 1 Gbps, 10 Gbps or 25 Gbps automatically. This 3 m fibre variant uses SFP28-to-SFP28 connectors that are backward-compatible with SFP and SFP+ ports — ideal for clean, reliable uplinks between UniFi switches, gateways and fibre-backbone deployments. Genuine Ubiquiti stock with fast shipping across Australia. Auto Link Optimization Automatically negotiates 25 / 10 / 1 Gbps so the link runs at the fastest speed both ends support — no manual configuration. SFP28 / SFP+ / SFP Compatible SFP28-to-SFP28 connectors that drop into SFP28, SFP+ and SFP ports across the UniFi switching and gateway range. 3 m Fibre Reach The 3 m and 30 m lengths use a fibre conductor with a slim 3 mm PVC jacket for tidy inter-rack and inter-rack-row runs. NDAA Compliant Manufactured by US-based Ubiquiti and NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model UACC-Uplink-SFP28 (3 m) Auto Link Optimization Yes Supported Data Rate 25 / 10 / 1 Gbps Connector Type SFP28 to SFP28 Wire (3 m / 30 m) Fibre Jacket Colour White Jacket Material PVC Jacket Outer Diameter (3 m) 3 mm (0.12″) Bend Radius (3 m) Min. 30 mm (1.18″) Available Lengths 0.15 / 0.3 / 3 / 30 m Operating Temperature 0 to 70°C (32 to 158°F) Compliance NDAA compliant Downloads & Resources UACC-Uplink-SFP28 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $145.75 $139.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 3M Black — Cat5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-3M-BK)

   

  UniFi Accessory — NDAA Compliant UniFi Patch Cable Outdoor 3M Black — All-Weather Cat5e Shielded RJ45 (UACC-Cable-Patch-Outdoor-3M-BK) The UniFi Patch Cable Outdoor 3M (Black) is a rugged, all-weather Category 5e patch cable built to survive the harshest outdoor environments. A shielded RJ45 plug, internal foil shielding, and a built-in ESD drain wire are sealed inside a weatherproof thermoplastic-elastomer jacket, making it ideal for connecting outdoor UniFi cameras, access points, and PoE devices. Genuine Ubiquiti stock with fast shipping right across Australia. Weatherproof Jacket Insulating thermoplastic-elastomer (TPE) jacket designed for extreme elemental protection in outdoor installs. Shielded & ESD-Protected Internal foil shielding (STP), a shielded RJ45 plug, and an integrated ESD drain wire keep signals clean and gear protected. 24 AWG Stranded Copper Category 5e performance with flexible 24 AWG stranded copper conductors for reliable PoE and data over a single cable. Multiple Lengths Part of a range offered in 1, 2, 3, 5 and 8 m so you can reach every device — this listing is the 3 m black version. Technical Specifications Model UACC-Cable-Patch-Outdoor-3M-BK Cable Length 3 m (9.84 ft) Cable Type Category 5e Shielding Type STP (shielded twisted pair) Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm (0.24″) Bend Radius Min. 24 mm (0.94″) Flame Rating VW-1 (UL1581) Connectors Shielded RJ45 plug, built-in ESD drain wire Cable Colour Black Weight 125 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2, ISO/IEC 11801 Downloads & Resources Outdoor Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $15.00

Show more products