The brand new ZapGuard® PSZ5U2 Surge Board will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. It is highly rated to withstand power surges and spikes of up to 1,400 Joules / 40,000 Amps. High surge protection Recessed On/Off Switch Wide spaced socket to allow for plug packs 10A Circuit Breaker 2 x USB Sockets 5 x Surge-protected sockets supply complete, 3 line AC protection $40,000 Connected Equipment Warranty – terms and conditions apply. Impact and scratch resistant Polycarbonate case Heavy-duty 1.2-meter power cord Wall mountable LED indicator shows that your wiring is properly earthed and protection is active and available Nominal Voltage / Frequency 240 Vac / 50 Hz Maximum Current 10 Amp breaker Maximum Power 2400 Watts Protection Mode 700 Joules (L-N), 350 Joules (L-E), 350 Joules (N-E) Maximum Surge Current 40,000 Amps Maximum Surge Energy 1,494 Joules Typical Response Time < 1 nS (instantaneous) USB Charging Current 3.1 Amps Dimensions (mm) 430 (L) x 35 (H) x 66 (W)

Read more less

The brand new ZapGuard® PSZ8U2 Surge Board will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. It is highly rated to withstand power surges and spikes of up to 2,100 Joules / 60,000 Amps. High surge protection Recessed On/Off Switch Wide spaced socket to allow for plug packs 10A Circuit Breaker 2 x USB Sockets 8 x Surge-protected sockets supply complete, 3 line AC protection $60,000 Connected Equipment Warranty – terms and conditions apply. Impact and scratch resistant Polycarbonate case Heavy-duty 1.2-meter power cord Wall mountable LED indicator shows that your wiring is properly earthed and protection is active and available

Read more less

Extend Fast Wired and Wireless Internet Using Your Existing Electrical WiringThe TP-Link TL-WPA8631P KIT is an AV1300 HomePlug AV2 powerline Wi-Fi kit that uses your home’s existing electrical wiring to deliver fast, stable internet to any room — no new cables required. The kit includes a sender adapter that connects to your router and a Wi-Fi extender adapter that plugs in anywhere in the home, providing AC1200 dual-band Wi-Fi, three Gigabit Ethernet ports, and a passthrough power socket. With a range of up to 300 metres over electrical wiring, it’s ideal for Australian homes where Wi-Fi struggles to reach.Key Features AV1300 HomePlug AV2 Powerline — up to 1300Mbps over existing electrical wiring for fast, stable wired-equivalent speeds AC1200 Dual-Band Wi-Fi — 867Mbps on 5GHz and 300Mbps on 2.4GHz for wireless devices in the extended room 3× Gigabit Ethernet Ports — connect smart TVs, gaming consoles, NVRs, or desktop PCs via wired connection Passthrough Power Socket — integrated outlet so you don’t lose the wall socket OneMesh Compatible — works with compatible TP-Link OneMesh routers to create a unified mesh network with seamless roaming One-Touch Wi-Fi Configuration — copies your router’s SSID and password with a single button press Wi-Fi Auto-Sync — automatically syncs SSID, password, and schedules across all powerline extenders on the network Up to 300m Range — covers large homes over existing electrical wiring Australian Plug Type — designed for Australian standard power outlets Plug and Play — no configuration software required; set up in minutes Typical Use Cases Extending fast internet to rooms where Wi-Fi signal is weak or unreliable Providing wired Gigabit connections to smart TVs, gaming consoles, or NVRs in remote rooms Multi-storey homes where Wi-Fi struggles to penetrate floors and ceilings Homes with thick concrete or brick walls that block wireless signals Adding reliable internet to a garage, home office, or back bedroom without running new cables Technical Specifications Specification Detail Model TL-WPA8631P KIT (TL-WPA8631P + TL-PA8010P) Powerline Standard HomePlug AV2, IEEE 1901 Powerline Speed Up to 1300Mbps Wi-Fi Standard IEEE 802.11ac/n/a (5GHz), IEEE 802.11n/b/g (2.4GHz) Wi-Fi Speed AC1200: 867Mbps (5GHz) + 300Mbps (2.4GHz) Ethernet Ports 3× Gigabit (10/100/1000Mbps) on TL-WPA8631P Passthrough Socket Yes (on TL-WPA8631P) Range Up to 300m over electrical wiring Plug Type Australian (Type I) Compatibility HomePlug AV and HomePlug AV2 standard adapters Dimensions – TL-WPA8631P 75 × 42 × 152 mm Dimensions – TL-PA8010P 72 × 42 × 131 mm Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does powerline networking work in Australian homes? Yes. Powerline adapters work with standard Australian 240V electrical wiring. Performance is best when both adapters are on the same electrical circuit (i.e., the same switchboard). Adapters on different circuits or connected via a power board may experience reduced speeds. Do I need to run any new cables? No. The TL-WPA8631P KIT uses your existing electrical wiring to carry the network signal. Simply plug the sender adapter near your router, connect it via Ethernet, and plug the extender adapter into any power outlet in the room you want to extend. Can I add more powerline adapters to extend coverage further? Yes. Additional compatible HomePlug AV2 adapters can be added to the same powerline network. The Wi-Fi Auto-Sync feature will automatically apply your SSID and password settings to new extenders. What is OneMesh and do I need a special router? OneMesh is TP-Link’s mesh networking technology that allows compatible TP-Link routers and extenders to form a unified network with a single SSID and seamless roaming. The TL-WPA8631P KIT works as a standard powerline Wi-Fi kit with any router, but OneMesh features require a compatible TP-Link OneMesh router. Will the passthrough socket affect powerline performance? No. The integrated passthrough socket is designed to maintain powerline signal quality. However, avoid plugging power boards or devices with large power supplies (such as UPS units) into the passthrough socket, as these can introduce electrical noise that may reduce powerline speeds.

Read more less

TP-Link TL-PA4010PKIT – AV600 Powerline Adapter Starter Kit with AC Pass Through The TP-Link TL-PA4010PKIT extends your wired network through your home or office’s existing electrical wiring — no new cables required. Unlike standard powerline adapters, the TL-PA4010P includes an integrated AC pass-through socket so you don’t lose a power outlet when you plug it in. With up to 600Mbps HomePlug AV speeds and a 300-metre range, it’s a practical solution for HD video streaming, IP cameras, and reliable wired connectivity in any room. Key Features AV600 Powerline Speed: Up to 600Mbps data transmission over existing electrical wiring via HomePlug AV standard — ideal for HD and 4K video streaming. AC Pass-Through Power Socket: Integrated power outlet on each adapter means you don’t sacrifice a wall socket to gain a network port. 300-Metre Range: Covers up to 300 metres of electrical wiring, suitable for most Australian homes and small commercial premises. Plug and Play: No software or driver installation required — simply plug in and press the Pair button to create an encrypted network connection. 128-bit AES Encryption: Secure powerline network with push-button pairing for easy, private setup. Power-Saving Mode: Automatically reduces power consumption by up to 85% when no data is being transmitted. Australian Plug Type: Supplied with AU-standard plugs for direct compatibility with Australian power outlets. 3-Year Warranty: Backed by TP-Link’s limited 3-year warranty for peace of mind. Ideal Use Cases Delivering a stable wired connection to smart TVs, media players, and gaming consoles in rooms with poor Wi-Fi coverage. Connecting IP cameras or NVRs to a network switch or router without running new Ethernet cable. Providing reliable internet access to home offices, bedrooms, or garages via existing power points. Installations where preserving wall socket availability is important, such as entertainment units or home theatre setups. Rental properties or heritage buildings where cable runs are impractical. Technical Specifications Specification Detail Model TL-PA4010PKIT (2 × TL-PA4010P) Powerline Standard HomePlug AV, IEEE 802.3, IEEE 802.3u Powerline Speed Up to 600Mbps LAN Port 1 × 10/100Mbps Ethernet (RJ45) AC Pass-Through Socket Yes (integrated power outlet) Plug Type AU (Australian standard) Range Up to 300 metres (electrical wiring) Encryption 128-bit AES Modulation OFDM Power Consumption (Max) 5.00W @ 220V/50Hz Power Consumption (Typical) 4.60W @ 220V/50Hz Power Consumption (Standby) 0.72W @ 220V/50Hz Power Saving Up to 85% reduction in idle mode Operating Temperature 0°C – 40°C Storage Temperature −40°C – 70°C Operating Humidity 10% – 90% (non-condensing) Dimensions 95 × 58 × 42 mm Certifications CE, FCC, RoHS Warranty 3-Year Limited SKU TL-PA4010P KIT Barcode (EAN) 6935364032845 What’s in the Box 2 × TL-PA4010P Powerline Adapter with AC Pass Through 2 × RJ45 Ethernet Cables Quick Installation Guide Frequently Asked Questions What is the AC pass-through socket used for? The integrated power socket on each adapter lets you plug another device (such as a lamp, phone charger, or appliance) directly into the adapter — so you don’t lose a wall outlet just to gain a network port. Does the pass-through socket affect powerline performance? TP-Link’s pass-through design includes filtering to minimise electrical noise from devices plugged into the socket, helping maintain consistent powerline speeds. Do I need to install any software? No. The TL-PA4010PKIT is plug and play. Plug one adapter into a power point near your router and connect it via Ethernet, then plug the second adapter wherever you need connectivity. Press the Pair buttons to encrypt the link and you’re done. Can I add more adapters to expand the network? Yes. Additional HomePlug AV-compatible TP-Link adapters can be added to extend coverage to more rooms or floors. Will it work across different power circuits or switchboards? Powerline adapters generally perform best on the same electrical circuit. Performance may degrade across different circuits or phases. Consult a licensed electrician if you’re unsure about your wiring configuration. Is this kit compatible with Australian power outlets? Yes. The TL-PA4010PKIT is supplied with Australian-standard (Type I) plugs and is rated for 220–240V/50Hz operation, making it fully compatible with Australian power points.

Read more less

TP-Link TL-WPA4220KIT – AV600 Wi-Fi Powerline Extender Starter Kit Eliminate Wi-Fi dead zones without running new cables. The TP-Link TL-WPA4220KIT uses your home or office's existing electrical wiring to deliver a fast, stable network connection to any room — ideal for HD video streaming, online gaming, IP cameras, and smart home devices. Key Features AV600 Powerline Speed: Up to 600Mbps data transmission over existing electrical wiring via HomePlug AV standard. 300Mbps Wireless: 2.4GHz 802.11b/g/n Wi-Fi extends your network to hard-to-reach areas. Wi-Fi Auto-Sync (Wi-Fi Clone): Press the Wi-Fi Clone button to instantly copy your router's SSID and password — no manual configuration required. Wi-Fi Move: Automatically synchronises any Wi-Fi setting changes across all adapters in the network. Plug, Pair and Play: Simple three-step setup — no technical expertise needed. 2 × Fast Ethernet Ports: Two 10/100Mbps LAN ports on the Wi-Fi extender for wired device connections. tpPLC App & Utility: Manage your powerline network, set Wi-Fi schedules, and control LED indicators from iOS or Android. Secure Connection: 128-bit AES encryption for a private, protected powerline network. Ideal Use Cases Extending Wi-Fi to garages, sheds, or back rooms where router signal is weak. Providing a stable wired or wireless connection for IP cameras and NVRs. Lag-free HD and 4K video streaming in living rooms or bedrooms. Online gaming consoles requiring a reliable, low-latency connection. Home offices needing a dependable connection away from the router. Small business or retail environments with existing electrical infrastructure. Technical Specifications Specification TL-PA4010 (Powerline Adapter) TL-WPA4220 (Wi-Fi Extender) Powerline Standard HomePlug AV HomePlug AV Powerline Speed Up to 600Mbps Up to 600Mbps Wireless Standard N/A IEEE 802.11b/g/n Wireless Speed N/A Up to 300Mbps (2.4GHz) LAN Ports 1 × 10/100Mbps 2 × 10/100Mbps Encryption 128-bit AES 128-bit AES Operating Frequency 2–68MHz 2–68MHz Operating Temperature 0°C – 40°C 0°C – 40°C Power Consumption ≤ 3.2W ≤ 6.2W Dimensions 52 × 36 × 77mm 52 × 36 × 77mm SKU / Model TL-PA4010 TL-WPA4220 Barcode (EAN) — 6935364032883 What's in the Box 1 × TL-PA4010 Powerline Adapter 1 × TL-WPA4220 Wi-Fi Powerline Extender 2 × RJ45 Ethernet Cables Quick Installation Guide Frequently Asked Questions Does this kit work with any router? Yes. The TL-WPA4220KIT is compatible with any router or modem that has a standard RJ45 Ethernet port. It works alongside your existing Wi-Fi network. Can I expand the network with additional adapters? Yes. You can add more TP-Link HomePlug AV-compatible adapters to extend coverage to additional rooms or floors. Will it work across different power circuits or circuit breakers? Powerline adapters generally work best on the same electrical circuit. Performance may vary if adapters are on different circuits or phases. A licensed electrician can advise on your specific setup. Is it suitable for connecting IP cameras or NVRs? Yes. The wired LAN ports on the TL-WPA4220 make it well-suited for connecting IP cameras, NVRs, or other security devices that require a stable, low-latency connection. Does it support the Australian power standard? Yes. This kit is supplied with Australian-standard plugs and is rated for 230V/50Hz operation. What is the maximum distance between adapters? TP-Link rates the TL-WPA4220KIT for up to 300 metres of electrical wiring between adapters, though real-world performance depends on wiring quality and electrical interference.

Read more less