VIVOTEK PoE Switch

VIVOTEK · 90W Ultra PoE Injector VIVOTEK 90W PoE VIVOTEK AP-GIC-011B-090 90W Ultra PoE Injector — 802.3bt, Single-Port Gigabit AP-GIC-011B-090 Single-Port 90W Gigabit PoE Injector — Australian Stock & 3-Year Warranty The VIVOTEK AP-GIC-011B-090 is a single-port Gigabit (10/100/1000) Ultra PoE injector that delivers up to 90W of power over a single Ethernet cable. Supporting IEEE 802.3af/at/bt, it powers the most demanding devices — PTZ speed domes, heated housings, multi-sensor cameras and high-power wireless APs — straight from a standard non-PoE switch port. Overcurrent and short-circuit protection make it a safe, plug-and-play way to add 802.3bt power anywhere. Output Power 90W Max Standard 802.3af/at/bt Speed Gigabit 10/100/1000 Protection OCP + Short-Circuit Why Choose the AP-GIC-011B-090 90W 802.3bt Ultra PoE Delivers up to 90W over one cable — enough for PTZ speed domes, heated enclosures, multi-sensor cameras and high-draw wireless APs. Backward Compatible Supports 802.3af, 802.3at and 802.3bt, so it powers everything from a basic fixed camera to the most demanding 802.3bt device. Full Gigabit Throughput 10/100/1000Mbps pass-through keeps high-megapixel and multi-stream footage flowing without a bottleneck. Add 802.3bt to Any Switch Turn a single non-PoE port into a 90W Ultra PoE port — no need to replace an entire switch to power one high-draw device. Overcurrent & Short-Circuit Protection Built-in protection safeguards the injector and the connected device against faults and wiring shorts. NDAA Compliant NDAA/TAA-compliant hardware suitable for government, enterprise and critical-infrastructure deployments. Technical Specifications PoE & Network PoE Standard IEEE 802.3af / 802.3at / 802.3bt Max Output Power 90W Ethernet Gigabit 10/100/1000Mbps PoE Output Ports 1 Power & Protection Input Voltage 90–264V AC Protection Overcurrent & short-circuit protection Compliance NDAA / TAA compliant Warranty 3-Year Australian Warranty Best For PTZ Speed Domes Supply the 802.3bt power a motorised PTZ camera needs from one port. Heated Housings Run cameras with heaters and blowers in cold or exposed sites. Multi-Sensor Cameras Power high-draw panoramic and multi-sensor units over a single cable. High-Power APs Feed demanding wireless access points without a bt-capable switch. Connect a data patch lead from your switch or router to the injector’s data-in port. Run one Ethernet cable from the injector’s PoE port to the powered device (up to 100m). Ideal where a device needs 802.3bt power but your switch only offers 802.3af/at or no PoE. Plug the injector into 90–264V AC mains — it powers up ready to use. Frequently Asked Questions How much power does the AP-GIC-011B-090 deliver?Up to 90W of Ultra PoE output under IEEE 802.3bt — enough for PTZ domes, heated housings, multi-sensor cameras and high-draw APs. Which PoE standards does it support?IEEE 802.3af, 802.3at and 802.3bt, so it powers both standard and high-draw devices. Is it Gigabit?Yes — it passes full 10/100/1000Mbps Gigabit Ethernet with no throughput bottleneck. What does a PoE injector do?It adds PoE power to a single standard (non-PoE) switch or router port, so one cable carries both data and power — here up to 90W. Does it protect against faults?Yes — built-in overcurrent and short-circuit protection safeguard the injector and connected device. Is it NDAA compliant and what warranty applies?Yes, it is NDAA/TAA compliant and backed by a 3-Year Australian warranty with local support from CCTV Guru. Downloads AP-GIC-011B-090 Datasheet VIVOTEK PoE Injector User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

VIVOTEK · Industrial PoE Switch VIVOTEK Industrial Switch VIVOTEK AW-IHT-1000 Industrial 8-Port Gigabit PoE Switch — 240W, Wide-Temp, DIN-Rail AW-IHT-1000 Industrial Unmanaged PoE Switch — Australian Stock & 3-Year Warranty The VIVOTEK AW-IHT-1000 is a rugged industrial unmanaged switch built to power larger IP camera clusters in harsh outdoor and industrial sites. It provides 8 Gigabit RJ45 PoE ports (IEEE 802.3af/at, up to 30W each) plus 2 Gigabit SFP fibre slots — ten ports in total — backed by a generous 240W PoE budget. With 20 Gbps switching, dual redundant DC input, 12KV per-port surge protection, a fanless DIN-rail chassis and a −40°C to 75°C operating range, it keeps every camera online through Australian heat, dust and storms. Ports 8 PoE · 2 SFP PoE Budget 240W · 30W/port Wide Temp −40°C to 75°C Standard 802.3af/at Why Choose the AW-IHT-1000 8 Gigabit PoE Ports, 240W Power up to eight 802.3af/at devices at 30W each across a big 240W budget — ideal for larger camera clusters, APs and access controllers on one switch. Dual SFP Fibre Uplinks Two Gigabit SFP slots let you connect remote camera nodes back to the core over long-haul fibre, far beyond copper distance limits. Built for Industrial Sites A fanless, DIN-rail metal chassis rated −40°C to 75°C survives exposed cabinets, plant rooms and roadside enclosures where standard switches fail. Redundant Power & Surge Protection Dual redundant 48–56VDC inputs keep the switch alive if one supply drops, while 12KV per-port PoE surge protection guards against lightning-induced spikes. 20 Gbps Non-Blocking 20 Gbps of switching bandwidth, 4K MAC table and 128KB buffer handle many high-megapixel streams at once without dropped frames. NDAA Compliant & Plug-and-Play NDAA/TAA-compliant hardware with zero configuration — mount it, wire it and it runs, integrating cleanly into any IP surveillance network. Technical Specifications Ports & Switching PoE Ports 8 × Gigabit RJ45 (10/100/1000), IEEE 802.3af/at Uplink Ports 2 × Gigabit SFP Total Ports 10 Switching Bandwidth 20 Gbps MAC Table / Buffer 4K MAC / 128KB packet buffer Management Unmanaged (plug-and-play) PoE & Power PoE Standard IEEE 802.3af / 802.3at Power per Port Up to 30W Total PoE Budget 240W Power Input Dual redundant DC 48–56VDC Surge Protection 12KV per-port PoE surge protection Chassis & Environment Mounting DIN-rail Cooling Fanless Operating Temperature −40°C to 75°C Compliance NDAA / TAA compliant Warranty 3-Year Australian Warranty Best For Larger Camera Clusters Eight PoE ports and a 240W budget power a full node of cameras from one switch. Perimeter & Roadside Runs in exposed cabinets that swing from freezing nights to 75°C heat. Factories & Plant Rooms Fanless, dust-tolerant design suits dirty, high-vibration industrial spaces. Fibre Backhaul Sites Dual SFP slots link remote camera clusters back to the core over fibre. Clip the switch to a standard 35mm DIN rail inside a weatherproof enclosure at the edge site. Feed it from a 48–56VDC industrial supply; wire both DC inputs for redundancy where uptime is critical. Keep total connected PoE load within the 240W budget across the eight PoE ports. Use the SFP slots with matching Gigabit transceivers for fibre runs beyond 100m. Frequently Asked Questions How many PoE ports does the AW-IHT-1000 have?Eight Gigabit RJ45 PoE ports plus two Gigabit SFP fibre slots — ten ports in total. What is the total PoE power budget?240W across the eight PoE ports, delivering up to 30W per port under IEEE 802.3af/at. Is it managed or unmanaged?It is an unmanaged, plug-and-play switch — no configuration needed. Mount it, wire it and it runs. Can it handle extreme temperatures?Yes. It is rated for a wide −40°C to 75°C operating range in a fanless DIN-rail chassis for industrial and outdoor cabinets. Does it support redundant power?Yes — it accepts dual redundant 48–56VDC inputs, so the switch stays up if one supply fails. Is it NDAA compliant and what warranty applies?Yes, it is NDAA/TAA compliant and backed by a 3-Year Australian warranty with local support from CCTV Guru. Downloads AW-IHT-1000 Datasheet VIVOTEK PoE Switch User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

VIVOTEK · Industrial PoE Switch VIVOTEK Industrial Switch VIVOTEK AW-IHT-0800 Industrial 4-Port Gigabit PoE Switch — 120W, Wide-Temp, DIN-Rail AW-IHT-0800 Industrial Unmanaged PoE Switch — Australian Stock & 3-Year Warranty The VIVOTEK AW-IHT-0800 is a rugged industrial unmanaged switch built to power and connect IP cameras in harsh outdoor and industrial sites. It provides 4 Gigabit RJ45 PoE ports (IEEE 802.3af/at, up to 30W each) plus 2 Gigabit RJ45 uplinks and 2 Gigabit SFP fibre slots — eight ports in total — backed by a 120W PoE budget. With dual redundant DC input, 12KV per-port surge protection, a fanless DIN-rail chassis and a −40°C to 75°C operating range, it keeps cameras online through Australian heat, dust and storms. Ports 4 PoE · 2 UTP · 2 SFP PoE Budget 120W · 30W/port Wide Temp −40°C to 75°C Standard 802.3af/at Why Choose the AW-IHT-0800 4 Gigabit PoE Ports, 120W Power up to four 802.3af/at devices at 30W each — dome, bullet and turret cameras, wireless APs or access controllers — with headroom to spare across a 120W budget. Fibre & Copper Uplinks Two Gigabit RJ45 uplinks and two Gigabit SFP fibre slots let you extend runs well beyond 100m and connect back to the core over long-haul fibre. Built for Industrial Sites A fanless, DIN-rail metal chassis rated −40°C to 75°C survives exposed cabinets, plant rooms and roadside enclosures where standard switches fail. Redundant Power & Surge Protection Dual redundant 48–56VDC inputs keep the switch alive if one supply drops, while 12KV per-port PoE surge protection guards against lightning-induced spikes. 16 Gbps Non-Blocking 16 Gbps of switching bandwidth handles simultaneous high-megapixel camera streams without dropped frames or congestion. NDAA Compliant & Plug-and-Play NDAA/TAA-compliant hardware with zero configuration — mount it, wire it and it runs, integrating cleanly into any IP surveillance network. Technical Specifications Ports & Switching PoE Ports 4 × Gigabit RJ45 (10/100/1000), IEEE 802.3af/at Uplink Ports 2 × Gigabit RJ45 (UTP) + 2 × Gigabit SFP Total Ports 8 Switching Bandwidth 16 Gbps Management Unmanaged (plug-and-play) PoE & Power PoE Standard IEEE 802.3af / 802.3at Power per Port Up to 30W Total PoE Budget 120W Power Input Dual redundant DC 48–56VDC Surge Protection 12KV per-port PoE surge protection Chassis & Environment Mounting DIN-rail Cooling Fanless Operating Temperature −40°C to 75°C Compliance NDAA / TAA compliant Warranty 3-Year Australian Warranty Best For Perimeter & Roadside Power cameras in exposed cabinets that swing from freezing nights to 75°C heat. Factories & Plant Rooms Fanless, dust-tolerant design suits dirty, high-vibration industrial spaces. Fibre Backhaul Sites Dual SFP slots link remote camera clusters back to the core over fibre. Small Camera Clusters Four PoE ports plus uplinks cover a compact edge node cleanly. Clip the switch to a standard 35mm DIN rail inside a weatherproof enclosure at the edge site. Feed it from a 48–56VDC industrial supply; wire both DC inputs for redundancy where uptime is critical. Keep total connected PoE load within the 120W budget across the four PoE ports. Use the SFP slots with matching Gigabit transceivers for fibre runs beyond 100m. Frequently Asked Questions How many PoE ports does the AW-IHT-0800 have?Four Gigabit RJ45 PoE ports, plus two Gigabit RJ45 uplinks and two Gigabit SFP fibre slots — eight ports in total. What is the total PoE power budget?120W across the four PoE ports, delivering up to 30W per port under IEEE 802.3af/at. Is it managed or unmanaged?It is an unmanaged, plug-and-play switch — no configuration needed. Mount it, wire it and it runs. Can it handle extreme temperatures?Yes. It is rated for a wide −40°C to 75°C operating range in a fanless DIN-rail chassis for industrial and outdoor cabinets. Does it support redundant power?Yes — it accepts dual redundant 48–56VDC inputs, so the switch stays up if one supply fails. Is it NDAA compliant and what warranty applies?Yes, it is NDAA/TAA compliant and backed by a 3-Year Australian warranty with local support from CCTV Guru. Downloads AW-IHT-0800 Datasheet VIVOTEK PoE Switch User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

VIVOTEK · 24-Port Managed Gigabit PoE Switch VIVOTEK 24-Port Managed VIVOTEK AW-GEV-288A-370 24-Port Gigabit Managed PoE Switch — VivoCam L2, 370W, 4× Combo AW-GEV-288A-370 24-Port Gigabit VivoCam L2 Managed PoE Switch — Australian Stock & 3-Year Warranty The VIVOTEK AW-GEV-288A-370 is a 24-port Gigabit VivoCam L2 managed PoE switch for large surveillance networks. It offers 24 Gigabit RJ45 PoE ports with full 802.3af/at/bt support — ports 1–20 at 30W and ports 21–24 at up to 90W (bt) — within a 370W total PoE budget. Four Gigabit RJ45/SFP combo uplinks and a console port complete the fanless design. A 56 Gbps backplane, 41.7 Mpps forwarding, VLAN (4096 IDs), QoS and extended PoE mode up to 250m make it ideal for big installs. It is NDAA compliant and backed by a 3-Year Australian Warranty. PoE Ports 24 × GbE PoE + 4 Combo PoE Standard 802.3af/at/bt · 90W PoE Budget 370W Total Management VivoCam L2 · Fanless Why Choose the AW-GEV-288A-370 24 Gigabit 802.3bt Ports Twenty-four Gigabit PoE ports — ports 1–20 at 30W and ports 21–24 at up to 90W — power a full building of cameras, including high-draw PTZ and multi-sensor units, within 370W. Fanless, High-Throughput Design A silent fanless chassis with a 56 Gbps backplane and 41.7 Mpps forwarding handles heavy multi-camera traffic without moving parts to fail. Extended PoE up to 250m Extended PoE mode pushes power and data up to 250 metres, reaching remote cameras well beyond the standard 100m Ethernet limit. VivoCam L2 Management VLAN (4096 IDs), QoS, link aggregation and multicast, plus VivoCam surveillance management for VIVOTEK devices — all from a browser. Technical Specifications Ports & Switching PoE Ports 24 × Gigabit RJ45 PoE Uplink Ports 4 × Gigabit RJ45 / SFP combo Console Port 1 × console (28 ports total) Backplane Bandwidth 56 Gbps Forwarding Rate 41.7 Mpps Power over Ethernet PoE Standards IEEE 802.3af / 802.3at / 802.3bt Per-Port Power Ports 1–20: 30W · Ports 21–24: 90W (bt) Total PoE Budget 370W Extended PoE Up to 250m Management & Features Management VivoCam L2 managed L2 Features VLAN (4096 IDs), QoS, link aggregation, multicast Surveillance VivoCam management for VIVOTEK devices Cooling Fanless Compliance Compliance NDAA compliant Warranty 3-Year Australian Warranty Best For Large Sites Power up to 24 cameras across a building, warehouse or campus from one switch. Remote Cameras Extended PoE reaches devices up to 250m from the rack. High-Power Cameras 90W bt ports drive PTZ, heater domes and multi-sensor arrays. Managed Networks VLANs and QoS keep large camera counts organised and prioritised. Connect high-draw cameras to ports 21–24 for up to 90W of 802.3bt power each. Keep total PoE draw within the 370W budget across all 24 ports. Enable extended PoE mode only for runs beyond 100m; it may reduce link speed on those ports. Use the VivoCam web interface to configure VLANs, QoS and manage VIVOTEK devices; fanless design suits quiet racks. Frequently Asked Questions How many cameras can the AW-GEV-288A-370 power?It has 24 Gigabit PoE ports and a 370W total budget, powering up to 24 cameras as long as their combined draw stays within 370W. How much power per port?Ports 1–20 deliver 30W and ports 21–24 deliver up to 90W (802.3bt). How far can it push PoE?Standard ports reach 100m, and extended PoE mode pushes power and data up to 250m for remote cameras. Is it managed and fanless?Yes — it is a VivoCam L2 managed switch with VLAN, QoS and link aggregation, in a silent fanless chassis. Does it have fibre uplinks?Yes — four Gigabit RJ45/SFP combo ports accept SFP modules for fibre or standard RJ45 copper. Is it NDAA compliant and what warranty applies?Yes, it is NDAA compliant and comes with a 3-Year Australian Warranty and local support from CCTV Guru. Downloads AW-GEV-288A-370 Datasheet VIVOTEK PoE Switch User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

VIVOTEK · 8-Port Managed Gigabit PoE Switch VIVOTEK 8-Port Managed VIVOTEK AW-GEV-108A-130 8-Port Gigabit Managed PoE Switch — VivoCam L2, 130W, 2× SFP AW-GEV-108A-130 8-Port Gigabit VivoCam L2 Managed PoE Switch — Australian Stock & 3-Year Warranty The VIVOTEK AW-GEV-108A-130 is an 8-port Gigabit VivoCam L2 web-managed PoE switch built for professional surveillance. It provides eight Gigabit RJ45 PoE ports with full 802.3af/at/bt support — ports 1–6 deliver 30W and ports 7–8 deliver up to 90W (bt) — within a 130W total PoE budget. Two Gigabit RJ45/SFP combo uplinks plus a console port complete the layout, and VivoCam surveillance tools auto-search up to 256 VIVOTEK devices, reboot PoE ports and map your network. With 20 Gbps switching, VLAN, QoS and IGMP snooping, it is NDAA compliant and backed by a 3-Year Australian Warranty. PoE Ports 8 × GbE PoE + 2 Combo PoE Standard 802.3af/at/bt · 90W PoE Budget 130W Total Management VivoCam L2 Managed Why Choose the AW-GEV-108A-130 Full-Gigabit 802.3bt PoE Eight Gigabit PoE ports with 802.3af/at/bt — ports 1–6 at 30W and ports 7–8 at up to 90W — power everything from fixed cameras to high-draw PTZ and heater domes. VivoCam Surveillance Management Auto-search up to 256 VIVOTEK devices, remotely reboot frozen cameras via PoE, and visualise the network with E-map and topology views plus traffic diagnostics. L2 Managed Networking VLAN segmentation, QoS prioritisation, IGMP snooping and link aggregation give you a stable, secure, multicast-friendly camera network. Gigabit Combo Uplinks Two Gigabit RJ45/SFP combo ports and 9216-byte jumbo frames deliver a fast copper or fibre backhaul with 20 Gbps switching and an 8K MAC table. Technical Specifications Ports & Switching PoE Ports 8 × Gigabit RJ45 PoE Uplink Ports 2 × Gigabit RJ45 / SFP combo Console Port 1 × console (10 ports total) Switching Bandwidth 20 Gbps MAC Table 8K Jumbo Frames 9216 bytes Power over Ethernet PoE Standards IEEE 802.3af / 802.3at / 802.3bt Per-Port Power Ports 1–6: 30W · Ports 7–8: 90W (bt) Total PoE Budget 130W Management & Features Management VivoCam L2 web-managed L2 Features VLAN, QoS, IGMP snooping, link aggregation VivoCam Tools Auto-search up to 256 VIVOTEK devices, PoE reboot, E-map/topology, traffic diagnostics Protection & Compliance Surge Protection 6KV surge Compliance NDAA compliant Warranty 3-Year Australian Warranty Best For Managed CCTV VLAN-segmented camera networks that need remote control and diagnostics. High-Power Cameras 90W bt ports drive PTZ, heater domes and multi-sensor units. VIVOTEK Sites VivoCam auto-discovers and manages up to 256 VIVOTEK devices. Fibre Backhaul SFP combo uplinks link to the core switch or NVR over fibre. Connect high-draw cameras (PTZ, heater domes) to ports 7–8 for up to 90W of 802.3bt power. Keep total PoE draw within the 130W budget across all eight ports. Access the VivoCam web interface to set VLANs, QoS and auto-discover VIVOTEK devices. Use an SFP module in a combo port for a fibre uplink; the paired RJ45 is disabled when SFP is active. Frequently Asked Questions Is the AW-GEV-108A-130 managed?Yes — it is a VivoCam L2 web-managed switch with VLAN, QoS, IGMP snooping and link aggregation. How much PoE power per port?Ports 1–6 deliver 30W and ports 7–8 deliver up to 90W (802.3bt), within a 130W total budget. Are all ports Gigabit?Yes — all eight PoE ports and the two combo uplinks are Gigabit, with 20 Gbps switching bandwidth. What are the VivoCam surveillance features?Auto-search of up to 256 VIVOTEK devices, PoE reboot of frozen cameras, E-map/topology view and traffic diagnostics. Can I connect fibre?Yes — the two Gigabit combo ports accept SFP modules for fibre or standard RJ45 copper. Is it NDAA compliant and what warranty applies?Yes, it is NDAA compliant and comes with a 3-Year Australian Warranty and local support from CCTV Guru. Downloads AW-GEV-108A-130 Datasheet VIVOTEK PoE Switch User Manual 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less