Power Adapters & Chargers

Dahua · DH-48V(2A) · NVR Power Supply · 48V 2A 48V NVR PSU Dahua DH-48V(2A) 48V DC 2A NVR Power Supply The Dahua DH-48V(2A) is a 48V DC 2A power adapter designed as the original replacement supply for Dahua PoE NVRs such as the NVR4108HS-P-4KS2. The 2A rating gives extra headroom to run the recorder and drive its PoE camera ports reliably. Supplied as a genuine Dahua spare. Always confirm the 48V DC input requirement on your NVR model before purchase — this adapter is not suitable for units requiring a different input voltage. Specifications — DH-48V(2A) Brand / Model Dahua DH-48V(2A) Device Type DC Power Supply Adapter Output Voltage 48V DC Output Current 2A Powers Dahua PoE NVRs (e.g. NVR4108HS-P-4KS2) Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Genuine Bosch · 18VAC 1.33A · 3-Wire Earthed · Solution Panels Bosch TF008-B Plug Pack TF008-B Plug Pack — Australian Stock & 3-Year Warranty The Bosch TF008-B is the genuine 18VAC 1.33A 3-wire compliant plug pack used to power Bosch Solution 2000, 3000, 4000 and 6000 alarm control panels. Its three-wire flying lead allows a mains earth connection between the plug pack and the panel or metal enclosure — useful for lightning protection and earthing — while built-in thermal fuses guard against overload and fault conditions. With a 24 W capacity and ESA-approved design, it is the correct replacement or new-install plug pack for most Bosch Solution systems. Genuine Bosch part, backed by a 3-year Australian warranty. Output 18VAC 1.33A Capacity 24 W Earth 3-Wire Input 240VAC 50Hz Genuine Bosch The factory plug pack specified for Solution 2000/3000/4000/6000 panels — correct voltage, current and connector. 3-Wire Earthed Flying earth lead lets you bond the metal enclosure for lightning protection and safe installation. Protected Design Built-in thermal fuses shut down under overload or fault, protecting the panel and wiring. ESA Approved Electrical Safety Authority approved with insulated active/neutral pins for compliant Australian installs. Technical Specifications Model / SKU TF008-B (BOSTF008-B) Input Voltage 240VAC 50Hz Output Voltage 18VAC Output Current 1.33A Maximum Capacity 24 W Earthing 3-wire, Class 1 earthed output Suits Panels Solution 2000 / 3000 / 4000 / 6000 Dimensions 78 x 59 x 77.9 mm Weight 620 g Operating Temperature -10°C to 40°C Warranty 3 Years (Australia) Downloads TF008-B Datasheet Bosch Plug Pack Quick Start Guide Bosch Plug Pack User Manual Frequently Asked Questions Which panels use the TF008-B?Bosch Solution 2000, 3000, 4000 and 6000 control panels. Why does it have three wires?The third wire is an earth flying lead so you can bond the metal enclosure for lightning protection and safe earthing. Is it AC or DC output?AC — 18VAC at 1.33A. The panel converts and regulates it internally to charge the battery and run the system. Does it charge the backup battery?Yes. The panel uses the TF008-B to run the system and keep the 12V SLA backup battery charged. Is it a genuine Bosch part?Yes — this is the genuine Bosch TF008-B, ESA approved for Australian installations. Can I use it as a replacement plug pack?Yes. It is the correct like-for-like replacement for a failed Solution-series plug pack. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua · DH-12V(2A) · DC Power Supply · 12V 2A 12V 2A PSU Dahua DH-12V(2A) 12V DC 2A Power Supply The Dahua DH-12V(2A) is a regulated 12V DC power adapter rated at 2A, ideal for powering a single CCTV camera or other 12V security device. It delivers clean, stable power for reliable day-to-day operation. Supplied as a genuine Dahua adapter, it makes a dependable replacement or spare for any 12V DC camera setup. Specifications — DH-12V(2A) Brand / Model Dahua DH-12V(2A) Device Type DC Power Supply Adapter Output Voltage 12V DC Output Current 2A Powers CCTV cameras & 12V devices Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua · DH-12V(5A) · DC Power Supply · 12V 5A 12V 5A PSU Dahua DH-12V(5A) 12V DC 5A Power Supply The Dahua DH-12V(5A) is a regulated 12V DC power adapter rated at 5A, ideal for powering CCTV cameras, DVRs and other 12V security devices. The higher current rating gives you headroom to run multiple cameras or a power-hungry device from a single supply. Supplied as a genuine Dahua adapter, it makes a dependable replacement or spare for any 12V DC CCTV setup. Specifications — DH-12V(5A) Brand / Model Dahua DH-12V(5A) Device Type DC Power Supply Adapter Output Voltage 12V DC Output Current 5A Powers CCTV cameras, DVRs & 12V devices Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua · DH-48V(1.5A) · NVR Power Supply · 48V 1.5A 48V NVR PSU Dahua DH-48V(1.5A) 48V DC NVR Power Supply The Dahua DH-48V(1.5A) is a 48V DC 1.5A power adapter designed as the original replacement supply for Dahua PoE NVRs such as the NVR4104HS-P. It delivers clean, regulated power to run the recorder and feed its built-in PoE ports. Supplied as a genuine Dahua spare. Always confirm the 48V DC input requirement on your NVR model before purchase — this adapter is not suitable for units requiring a different input voltage. Specifications — DH-48V(1.5A) Brand / Model Dahua DH-48V(1.5A) Device Type DC Power Supply Adapter Output Voltage 48V DC Output Current 1.5A Powers Dahua PoE NVRs (e.g. NVR4104HS-P) Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua · ADS-110DL-48N-1 · DC Power Supply · 53V 1.812A 53V DC PSU Dahua ADS-110DL-48N-1 53V DC Power Supply The Dahua ADS-110DL-48N-1 is a regulated 53V DC power adapter that delivers stable power to Dahua PoE NVRs, PoE switches and network devices requiring a 53V input. With a wide 100-240V AC input range and a 1.812A output, it suits both residential and commercial CCTV installs as an original replacement or spare. It uses a standard IEC mains input and a 4.0mm DC output jack for quick, secure connection. Note: this adapter is not suitable for NVRs requiring 12V DC input - always confirm the input voltage on your model's datasheet before purchase. Specifications — ADS-110DL-48N-1 Brand / Model Dahua ADS-110DL-48N-1 Device Type DC Power Supply Adapter Input Voltage 100-240V AC Input Current 1.5A Input Connector IEC Mains Plug Output Voltage 53V DC Output Current 1.812A Output Connector 4.0mm DC Jack Number of Outputs 1 Powers Dahua PoE NVRs, PoE switches & 53V network devices Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

DC12V5A DVR POWER SUPPLY FOR TVI0808H & TVI 1616H DVR

Read more less

AX Hybrid Pro · 15 V 4 A Power Supply · Power Cord Included 15 V 4 A Power Supply HiLook HA-ALARM-POWER (O-STD) 15 V 4 A Power Supply — Australian Stock & 3-Year Warranty The HiLook HA-ALARM-POWER (O-STD) is the standard power supply for the HiLook AX Hybrid Pro alarm system, delivering a stable 15 V DC at 4 A with built-in overload and short-circuit protection for safe, reliable operation. The power cord is included for quick setup, making it the straightforward replacement or spare PSU for your alarm panel installation. Backed by genuine Australian stock and a 3-year warranty. Specifications Model / SKU HA-ALARM-POWER (O-STD) Output 15 V DC, 4 A (60 W max) Input 100–240 V AC, 50/60 Hz Protection Overload & short-circuit Cable Power cord included Use HiLook AX Hybrid Pro alarm panel & security systems Warranty 3-Year Australian Warranty Frequently Asked Questions What does this power supply output?A stable 15 V DC at 4 A (up to 60 W), suitable for the HiLook alarm panel and security equipment. Does it come with a power cord?Yes — the power cord is included for plug-and-go installation. Is it protected against faults?Yes. It has built-in overload and short-circuit protection for safe, reliable operation. What is it used for?It's the standard PSU for the HiLook AX Hybrid Pro alarm system — ideal as a replacement or spare. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

CCTV Power Supply Patriot POW-12 PP — 12V DC 5A Power Supply, 4 Outputs Keep your CCTV cameras running 24/7 with the Patriot POW-12 PP — a compact, reliable 12V DC power supply purpose-built for security installations. With 4 independent output channels, universal AC input, and built-in surge protection, it's the go-to power solution for installers and integrators across Australia. Output 12V DC / 5A Channels 4 Outputs AC Input 110–240V Protection Surge + PTC Why Choose the Patriot POW-12 PP? Universal Dual Voltage Input Accepts 110–240V AC input, making it compatible with any Australian power point and suitable for international deployments without an adapter. Adjustable 12V DC Output User-adjustable output voltage lets you fine-tune power delivery to match the exact requirements of your cameras and peripherals. 4 Independent Channels Power up to 4 CCTV cameras from a single unit. Each channel is independently fused, so a fault on one camera won't affect the others. Built-in Surge & PTC Protection Input surge protection guards against voltage spikes, while the built-in PTC automatically limits total load to 5A — protecting your cameras and the supply itself. Terminal Cover Included The included terminal cover keeps wiring safe, dust-free, and compliant with installation best practices — no extra accessories needed. Wall or DIN Rail Mount Flexible mounting options suit both cabinet-based and surface-mounted installations. Compact 151H × 35W × 55D mm footprint fits tight spaces. Technical Specifications Model M-DC12-5A (POW-12 PP) AC Input Voltage 110 – 240V AC (dual voltage) DC Output Voltage 12V DC (user adjustable) Total Output Current 5A (PTC limited) Output Channels 4 × independent outputs Input Protection Surge protection Overcurrent Protection Built-in PTC (5A limit) Mounting Wall mount or DIN rail Terminal Cover Included Dimensions 151H × 35W × 55D mm Weight 0.23 kg SKU M-DC12-5A Frequently Asked Questions How many cameras can this power supply run? Up to 4 cameras via its 4 independent output channels, provided the total current draw does not exceed 5A. Most standard CCTV cameras draw 300–800mA each. Is it compatible with Australian power points? Yes. The 110–240V AC dual voltage input is fully compatible with Australian 240V power points and international voltages. Can it be mounted inside a security cabinet? Absolutely. The DIN rail mounting option makes it ideal for installation inside standard security enclosures and equipment cabinets. What happens if one camera draws too much current? The built-in PTC (Positive Temperature Coefficient) device automatically limits the total load to 5A, protecting both the supply and connected cameras from overcurrent damage. Downloads Download Datasheet Fast AU Shipping Genuine Stock Expert AU Support

Read more less

Power Pack · 14.3VDC / 2.5A · Hikvision Hybrid Alarm ACPS14.3 — 14.3VDC 2.5A Power Pack for Hikvision Hybrid Alarm The ACPS14.3 (TPS14.3-2.5DC) is a continuously rated 14.3 V DC, 2.5 A switching plug-pack power supply — the required power adaptor for the Hikvision Hybrid Alarm panel. It is designed for ITE and indoor use, delivering clean, stable power to keep the alarm running reliably. Built-in overload and short-circuit protection shuts the supply down on a fault and restores normal operation once the fault is cleared. A blue LED confirms mains power, and the unit ships with an integrated approved 240 V plug. Required AdaptorPurpose-matched power pack for the Hikvision Hybrid Alarm. 14.3VDC / 2.5AContinuously rated switching supply for stable alarm power. Fault ProtectionOverload / short-circuit protection that auto-recovers when cleared. AS/NZS CertifiedCompliant with AS/NZS 62368 and AS/NZS 3112 safety standards. Technical Specifications Model TPS14.3-2.5DC (ACPS14.3) Output Voltage 14.3 V DC Output Current 2.5 A continuous Output Lead 2-core lead Output Ripple < 50 mVp-p @ full load Input 100–240 V AC (±10%), 50 Hz, 0.8 A @ full load Indicator Blue LED — mains applied Dimensions 110 mm L × 55 mm W Mains Connection Integrated approved 240 V plug Compliance AS/NZS 62368:2018, AS/NZS 3112:2017, AS/NZS CISPR 32 (Class B) Manufacturer Warranty 2 years What is this for?It is the required 14.3 V DC plug-pack power supply for the Hikvision Hybrid Alarm panel. What happens on a fault?Overload or short-circuit protection shuts the supply down; clearing the fault returns it to normal operation. AU-Certified Supply Fast AU-Wide Shipping AU Tech Support The matched, AS/NZS-certified power pack your Hikvision Hybrid Alarm needs — stable, protected power in a compact plug-pack.

Read more less

Genuine Hikvision · PoE Injector · 60W for PTZHikvision DS-POE-INJECTORSingle-Cable Power and Data for Your PTZ Camera The Hikvision DS-POE-INJECTOR delivers DC 56V at up to 60W over a single network cable, making it ideal for powering Hikvision PTZ cameras. It combines power and data into one run, simplifying installation where a dedicated power supply at the camera is impractical. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It 60W Power Budget — Delivers up to 60W, enough headroom for power-hungry PTZ cameras. DC 56V Output — Supplies a high-voltage PoE feed suited to PTZ camera requirements. Single-Cable Install — Combines power and data over one network cable to simplify cabling runs. Genuine Hikvision Part — An authentic Hikvision injector engineered for reliable PTZ power delivery. Specifications Model DS-POE-INJECTOR Category PoE & Power Application/Mounting PoE Injector for PTZ Use, DC 56V, 60W Warranty 3 Years (AU) Frequently Asked Questions Which cameras is this injector compatible with?It is designed to power Hikvision PTZ cameras that accept a DC 56V / 60W PoE feed. Confirm your camera's power input with our AU tech support before ordering. Can it be used outdoors?The injector itself should be installed indoors or within a protected enclosure. The single cable run then carries power and data out to the camera. Is this a genuine Hikvision product?Yes. This is an authentic Hikvision DS-POE-INJECTOR supplied with a 3-year Australian warranty. How does a PoE injector work?It adds power onto a standard network cable, so a single cable carries both data and power to the camera, removing the need for a separate power outlet at the camera location.

Read more less

Dahua · DH-48V(1.25A) · DC Power Supply · 48V 1.25A 48V DC PSU Dahua DH-48V(1.25A) 48V DC Power Supply The Dahua DH-48V(1.25A) is a 48V DC 1.25A power adapter designed as the original replacement supply for the Dahua DHI-AC-VTNS1001B-2 PoE switch used in IP intercom systems. It delivers clean, regulated power to keep your access and intercom hardware running reliably. Supplied as a genuine Dahua spare, it is a direct fit for the VTNS1001B-2. Always confirm the 48V DC input requirement on your device before purchase. Specifications — DH-48V(1.25A) Brand / Model Dahua DH-48V(1.25A) Device Type DC Power Supply Adapter Output Voltage 48V DC Output Current 1.25A Designed For Dahua DHI-AC-VTNS1001B-2 PoE switch Colour Black Warranty (Australia) 3 years · CCTV Guru Australia 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Power Supply AC24V 1A

Read more less

DC12V1.5A DVR POWER SUPPLY for TVI 0404H

Read more less

Hikvision Industrial Series Heavy-Duty 240W 48V Industrial DIN Rail Power Supply Ensure uninterrupted operation across critical security infrastructure and industrial networks with the Hikvision NDR-240-48. Designed for demanding commercial and industrial enclosures, this high-performance 240W single-output power supply converts universal AC input voltages into a stable 48 VDC output. Engineered with an ultra-slim metal housing to conserve valuable enclosure rail space, it delivers continuous power to PoE network switches, security controllers, PTZ cameras, and edge computing equipment deployed in extreme environments. Power & Output 240W / 48V DC / 5A AC Input Range 90 to 264 VAC Universal Operating Efficiency Up to 88.5% High Efficiency Protection Suite Short Circuit / Overload / OVP / Temp Built-in Active PFC & TS-35 Rail Mountability Engineered for maximum electrical stability, the NDR-240-48 features built-in active Power Factor Correction (PFC) to maintain power efficiency and comply with strict industrial power standards. Its robust metal chassis easily snaps onto standard TS-35/7.5 or TS-35/15 DIN rails, drastically reducing installation time in control panels and outdoor NEMA-rated field cabinets. With convection cooling operating from -20°C to +70°C, this power supply provides dependable operation without requiring active fan ventilation. Slimline Metal Enclosure Design Featuring a narrow 63mm width, this power unit maximizes space on crowded DIN rails, allowing security integrators to fit more transmission components, circuit breakers, and terminal blocks within a single enclosure. Comprehensive Electrical Protections Includes automated protection against short circuits, overloads, overvoltage, and over-temperature conditions, safeguarding connected surveillance hardware against grid fluctuations and field electrical anomalies. Technical Specification Matrix Power Supply Model NDR-240-48 Rated Power Output 240 W DC Output Voltage 48 VDC Rated Current 5 A Input Voltage Range 90 to 264 VAC / 127 to 370 VDC Efficiency (Typ.) 88.5% Voltage Adjustment Range 48 to 55 VDC Mounting Format DIN Rail TS-35/7.5 or TS-35/15 Operating Temperature -20°C to +70°C (-4°F to +158°F) Dimensions (W × H × D) 63 mm × 125.2 mm × 113.5 mm Frequently Asked Questions Can the output voltage be adjusted on the NDR-240-48? Yes, the front panel includes an adjustable DC voltage potentiometer allowing fine-tuning of the output voltage between 48 VDC and 55 VDC to account for long cable runs. Is active cooling required for this power supply? No, the unit relies on free air convection cooling within its rugged metal chassis, allowing fanless operation across a wide temperature range from -20°C to +70°C. What equipment can be powered by this 48V power supply? It is designed to power industrial PoE switches, hardened media converters, access controllers, and 48V security equipment mounted inside DIN rail field cabinets. Does this unit feature Power Factor Correction (PFC)? Yes, it includes built-in active PFC (Power Factor Correction), providing an optimized power factor under full load to reduce harmonic distortion and energy losses. Technical Datasheet Official Hikvision Stock Commercial Warranty Aust-Wide Delivery

Read more less

Genuine Bosch · 16VAC · Plug Pack · G-Series Bosch G-Series PSU 16VPP-48VA 16VAC Power Supply — Australian Stock & 3-Year Warranty The Bosch 16VPP-48VA is a genuine 16VAC plug pack power supply designed for Bosch G-Series alarm control panels (B9512G / B8512G). It supplies the panel with the correct AC input so the system can run and keep its 12V backup battery charged. As the factory-specified transformer, it is the correct replacement or new-install plug pack for G-Series systems. Genuine Bosch part, backed by a 3-year Australian warranty. Technical Specifications Model / SKU 16VPP-48VA (BOS16VPP-48VA) Output Voltage 16VAC Type Plug pack power supply Suits Panels Bosch G-Series (B9512G / B8512G) Housing Plastic Warranty 3 Years (Australia) Downloads 16VPP-48VA Datasheet Bosch Plug Pack Quick Start Guide Bosch Plug Pack User Manual Frequently Asked Questions Which panels use the 16VPP-48VA?It is the plug pack power supply for Bosch G-Series alarm panels such as the B9512G and B8512G. What is the output voltage?16VAC. The panel converts and regulates it internally. Does it keep the backup battery charged?Yes. The panel uses this supply to run the system and charge the 12V SLA backup battery. Is it a genuine Bosch part?Yes — this is the genuine Bosch 16VPP-48VA plug pack for G-Series systems. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

AU POWER SUPPLY, 62W Teltonika AU POWER SUPPLY 62W Downloads DATASHEET

Read more less

AU 2-PIN POWER SUPPLY, 9W Teltonika AU 2-PIN POWER SUPPLY, 9W Downloads DATASHEET

Read more less

AU POWER SUPPLY, 18W Teltonika AU POWER SUPPLY 18W  Downloads DATASHEET 

Read more less

AC24V6.25A POWER SUPPLY

Read more less

DC12V5A POWER SUPPLY

Read more less

Power Supply for Intercom Monitor

Read more less