UniFi NVRs

UniFi Protect — Enterprise Rack NVR UniFi Protect UNVR — 4-Bay Rack NVR for Up to 15 × 4K Cameras The UniFi Protect UNVR is the professional rack-mount NVR for demanding UniFi Protect deployments — supporting up to 15 × 4K cameras or 50 × Full HD cameras with up to 30 days of local storage across four 3.5″ HDD bays. With automatic HDD RAID for data redundancy, a 10G SFP+ uplink, and optional power backup compatibility, the UNVR is built for commercial, enterprise, and high-security installations across Australia. Max Cameras 15 × 4K HDD Bays 4 × 3.5″ Uplink 10G SFP+ Redundancy Auto RAID Why Choose the UniFi Protect UNVR? 4 × 3.5″ HDD Bays — Up to 30 Days Storage Install up to four 3.5″ SATA HDDs for high-capacity local recording — enough for 30 days of continuous footage from 15 × 4K cameras or 50 × Full HD cameras. Automatic HDD RAID Configuration Built-in automatic RAID configuration provides data redundancy — protecting your recordings against single drive failure without manual RAID setup. 10G SFP+ Uplink A high-speed 10G SFP+ port handles the bandwidth demands of multiple 4K camera streams simultaneously — essential for large-scale deployments. Gigabit RJ45 Uplink An additional 1G RJ45 port provides flexible network connectivity for standard Gigabit infrastructure. Power Backup Compatible Connects to the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your surveillance system running during power events. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras out of the box — no separate software licence, no subscription, no cloud dependency. Rack-Mount Form Factor 1U rack-mountable design integrates cleanly into server rooms, comms cabinets, and AV racks for professional installations. Scales to 15 × 4K or 50 × HD Cameras The UNVR handles the largest UniFi Protect camera deployments — from mid-size commercial sites to enterprise and multi-building installations. Ideal Use Cases 🏭 Commercial & Enterprise Sites Warehouses, manufacturing facilities, and large commercial properties needing high-capacity 4K recording with RAID redundancy. 🏫 Schools & Campuses Multi-building school and university campuses where centralised recording, long retention, and reliable storage are critical. 🏢 Office Buildings & Strata Multi-tenancy office buildings, strata complexes, and commercial towers with large camera counts and server room infrastructure. 📹 Large UniFi Protect Deployments The UNVR is the recommended NVR for any UniFi Protect deployment exceeding 6 cameras — step up from the UNVR Instant when you need more capacity and redundancy. Technical Specifications Model UNVR HDD Bays 4 × 2.5″/3.5″ SATA (drives not included) Max Cameras 15 × 4K / 50 × Full HD Max Storage Retention Up to 30 days (15 × 4K cameras) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 RAID Automatic HDD RAID configuration Power Backup Compatible with USP-RPS (sold separately) Management UniFi Protect (pre-installed, no subscription) Form Factor 1U Rack-mount What’s in the Box 📦 UNVR Unit 4-bay rack NVR with UniFi Protect pre-installed. 🔧 Rack Mount Hardware Rack mounting hardware and power cable included. 📖 Quick-Start Guide Installation guide and documentation included. ⚠️ Not Included HDDs, cameras, and USP-RPS power backup are sold separately. Frequently Asked Questions Does the UNVR require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk). Check Ubiquiti’s HDD compatibility list before purchasing. How many cameras can the UNVR support? Up to 15 × 4K cameras or 50 × Full HD cameras, with up to 30 days of local storage retention. What is the difference between the UNVR and UNVR Instant? The UNVR Instant is a compact desktop NVR with 6 built-in PoE ports, suited for up to 6 × 4K cameras. The UNVR is a rack-mount unit with 4 HDD bays, 10G SFP+, and supports up to 15 × 4K cameras — designed for larger commercial deployments. Does it support power redundancy? Yes. The UNVR is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Downloads & Resources Datasheet Installation Guide Relevant Add-ons & Accessories UniFi Protect ViewPort PoE HDMI Adapter Display the UNVR's UniFi Protect camera feeds on an HDMI monitor or television. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UNVR-Instant — UniFi Protect Compact PoE NVR with 6-Port PoE Switch & HDMI ViewPort The Ubiquiti UNVR-Instant is the simplest way to deploy a complete UniFi Protect surveillance system — a compact desktop NVR with a built-in 6-port Gigabit PoE switch, an HDMI ViewPort for local live viewing, and a single 3.5″ HDD bay for local recording. Power and connect up to six 4K UniFi cameras directly from the unit, manage everything through the UniFi Protect app or web interface, and keep full control of your footage with no monthly subscription. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's the ideal recorder for homes, offices, and small businesses across Australia. PoE Ports 6 × Gigabit Managed Cameras Up to 6 × 4K ViewPort HDMI Output Storage 1 × 3.5″ HDD Bay Why Choose the Ubiquiti UNVR-Instant? Built-in 6-Port Gigabit PoE Switch Power and connect up to six UniFi cameras directly from the UNVR-Instant — no separate PoE switch required. A 40 W PoE budget delivers up to 15.4 W per port (802.3af PoE), plus a Gigabit RJ45 uplink to your network. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to display live multi-camera feeds straight from the unit — no PC, tablet, or app required for on-site monitoring. 3.5″ HDD Bay — Local Storage Install a compatible 3.5″ SATA hard drive for local recording, with built-in Data Protection to guard against drive failure. Keep full control of your footage — no cloud, no data leaving your premises. Manage Up to 15 Cameras Scale to suit your site — up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. UniFi Protect & Access — No Subscription Run UniFi Protect cameras and up to 50 UniFi Access hubs from one unit, managed via the UniFi app or web interface — fully local, with no monthly fees. Plug-and-Play Camera Adoption UniFi cameras connected to the PoE ports are automatically discovered and adopted into UniFi Protect — no manual IP configuration or complex setup required. Compact Desktop Form Factor At just 220 × 220 × 47 mm and 1.04 kg, the UNVR-Instant fits neatly on a shelf, in a comms cabinet, or wall / DIN-rail mounted — ideal for homes, small offices, and retail stores. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a mandatory requirement. Technical Specifications Model UNVR-Instant Managed Cameras 6 × 4K • 8 × 2K • 15 × HD Managed Access Hubs Up to 50 Management Applications UniFi Protect, UniFi Access, UniFi Connect Networking Interface 1 × GbE RJ45 uplink • 6 × GbE PoE RJ45 downlink • 1 × HDMI (ViewPort) Storage 1 × 3.5″ HDD bay (drive not included) • Data Protection Processor Quad-core ARM® Cortex®-A55 @ 1.7 GHz Memory 4 GB Display 1.14″ status screen PoE Budget 40 W total • up to 15.4 W per port (PoE / 802.3af) • 44–57 V Power Supply Internal AC/DC, 60 W • 100–240 V AC, 1.5 A max, 50/60 Hz Max. Power Consumption 9 W (excluding PoE / drive) Max. Drive Power Budget 11 W Management Ethernet • Bluetooth Mounting Wall & DIN-rail mount (included) Form Factor Compact desktop Enclosure Polycarbonate Dimensions / Weight 220 × 220 × 47 mm • 1.04 kg Operating Temperature 0°C to 40°C, 5–95% non-condensing Certifications FCC, IC, CE, Electrical Safety, SRRC, Anatel Compliance NDAA compliant Downloads & Resources UNVR-Instant Tech Specs UNVR-Instant Installation Guide What's in the Box UNVR-Instant Unit Compact UniFi Protect PoE NVR with a built-in 6-port PoE switch and HDMI ViewPort. Mounting Kit Wall and DIN-rail mounting hardware included. Documentation Quick-start guide and installation instructions. Not Included A 3.5″ SATA HDD and UniFi cameras are sold separately. Best For Homes & Driveways Power up to six 4K UniFi cameras, record locally, and watch live on your TV via HDMI ViewPort. Retail & Hospitality A self-contained, subscription-free CCTV recorder for shopfronts, cafes, and small stores. Offices & Strata Cover entries, car parks, and common areas with a tidy, low-profile NVR for any comms cabinet. UniFi Protect Starter Systems The recommended starting point for a new UniFi Protect deployment with G6 Turret, Bullet, or Dome cameras. Runs UniFi Protect locally — no monthly fees and no data leaving your premises. Connect up to six UniFi cameras directly to the built-in PoE ports; add more via a switch on the uplink, up to the supported camera count. Install a compatible 3.5″ surveillance-grade SATA HDD (sold separately) for recording. Wall or DIN-rail mountable; status screen and HDMI ViewPort make on-site setup quick. Frequently Asked Questions Does the UNVR-Instant require a UniFi Protect subscription? No. UniFi Protect runs fully locally on the UNVR-Instant. There are no monthly fees and no cloud subscription required. What hard drive do I need? A compatible 3.5″ SATA HDD. Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for 24/7 recording. The drive is not included. How many cameras can it support? Up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. Can I connect more than 6 cameras? Yes. The six built-in PoE ports power local cameras directly; additional cameras can connect via a separate PoE switch on the Gigabit uplink, up to the unit's maximum camera count. Which cameras are compatible? All UniFi Protect cameras, including the G6 Turret, G6 Bullet, G6 Dome, and earlier G4/G5 series. Can it also run UniFi Access? Yes. The UNVR-Instant supports UniFi Access and can manage up to 50 Access hubs alongside UniFi Protect cameras. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ (UNVR-Pro) The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Up to 60 Days Retention Install up to seven 2.5″ or 3.5″ SATA drives for massive local storage capacity — enough for up to 60 days of continuous footage from 20 × 4K cameras or 60 × Full HD cameras. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Up to 60 days (configuration dependent) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis Compliance NDAA compliant Downloads & Resources UNVR Pro Datasheet Installation Guide What's in the Box UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. Rack Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Best For Large Commercial & Enterprise Sites Factories, warehouses, and logistics hubs needing enterprise-grade recording capacity with RAID redundancy. Schools, Universities & Campuses Multi-building campuses where long retention, high camera counts, and reliable RAID storage are non-negotiable. Office Towers & Strata Complexes High-rise offices and strata complexes with server-room infrastructure and large camera deployments. Maximum-Scale UniFi Protect Systems The top-tier UniFi Protect NVR for deployments needing maximum storage, RAID protection, and enterprise uplink speeds. Mounts in any standard 2U rack space — server rooms, comms cabinets, and data centres. Pair with a UniFi PoE switch to power and manage cameras from a single pane of glass. Use surveillance-grade SATA drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording. Add a USP-RPS Power Backup for power redundancy on critical installs. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives such as WD Purple Pro or Seagate SkyHawk AI. Check Ubiquiti's HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What's the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Is the UNVR Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UNVR Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Relevant Add-ons & Accessories UniFi Protect ViewPort PoE HDMI Adapter Display the UNVR Pro's UniFi Protect camera feeds on an HDMI monitor or television. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less