Wi-Fi CCTV Kits

Wi-Fi security camera kits for flexible installation

Shop Wi-Fi CCTV and security camera kits from TP-Link VIGI, Ubiquiti UniFi Protect, TP-Link Tapo, Dahua and Hikvision. Compare complete multi-camera systems, local-recorder bundles and battery or solar camera kits for homes, small businesses and remote locations.

Choose the right recording method

The VIGI systems include an NVR and need a compatible surveillance hard drive for longer local retention. The UniFi Protect bundle records locally to the UDR7 microSD storage; it includes 64 GB and can use replacement storage for longer retention. The Dahua, Hikvision and Tapo camera kits in this collection do not include a separate NVR. Their exact cameras support local microSD recording up to 512 GB, with cards sold separately. Tapo battery-camera recording is event-based rather than continuous. Actual retention depends on card capacity, resolution, recording mode, event frequency and scene activity.

Wi-Fi carries network video, but cameras still need their specified mains, USB, battery or solar power. Check each product for storage, weather rating, Wi-Fi coverage, power and installation requirements before ordering.

10 products

  • Save $5.01 Tapo TC92 KIT smart solar-powered wire-free security camera with the included solar panel and mounting base. Front view of the retail packaging for the Tapo TC92 KIT Solar-Powered Security Camera Kit, Australian edition.

    TP-Link TP-Link Tapo TC92 Kit Outdoor Wi-Fi Security Camera Starter Kit

    TAPO · SECURITY CAMERAS TP-Link Tapo TC92 KIT — Solar-Powered Security Camera Kit Keep an eye on the places that matter with the Tapo TC92 KIT. Check the viewing detail, connection and power requirements below, then use the official setup resources to plan its position and recording. Maximum Resolution 4K 8MP (3840 × 2160 px)Frame the important area carefully. Resolution helps show detail, while distance, lighting and subject movement affect what you can identify. Output Port Type-CCheck compatibility and signal at the intended position before permanent installation. The connection type does not determine the power supply. Weather Resistance IP65 for both camera and solar panelUse this specification to compare the TC92 KIT with the requirements of your intended location. Power Source 10000 mAh Built-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201Plan around this power requirement. Check the installation guide and keep charging or power connections accessible for maintenance. Designed for everyday use Place the view where it counts Test the live view at the intended mounting height before drilling. Check daytime and night-time visibility, keeping nearby reflective surfaces and strong glare out of the foreground. Set the camera angle around an entrance or activity area where useful detail matters most. Plan charging around your location Battery runtime changes with activity, live viewing, signal strength and temperature. Leave access for recharging and check battery status after installation. The included solar panel needs a suitable sunlit position; shade, weather and camera use affect how much charge it supplies. Make recordings easy to find Choose the supported local recording option and test playback after setup. Memory cards are separate unless explicitly included in your selected pack. Tapo Care cloud recording is an optional paid service where supported. Adjust notifications around useful activity so important events are easier to review. Technical details Specifications below follow TP-Link’s linked model page. Hardware revisions can differ; select the version printed on your device for firmware, capacity and compatibility details. ModelTapo TC92 KIT Night Vision850 nm IR LED (40 ft / 12 m) Full-Color Night Vision Output PortType-C Maximum Resolution4K 8MP (3840 × 2160 px) Audio CommunicationTwo-Way Audio with Noise Cancellation Local StorageMicroSD Card Slot on Camera (Up to 512 GB, microSD card not included) Network ConnectivityConnect via Wi-Fi Wireless ConnectivityIEEE 802.11a/b/g/n, 2.4 GHz/5 GHz Wi-Fi Power Source10000 mAh Built-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201 Output VoltageAdapter Output: 5.0 V, 2.0 A (Not include) Solar Panel Max Charging Voltage: 5.2 V Solar Panel Max Charging Power: 2.5 W Weather ResistanceIP65 for both camera and solar panel Before you order Which version should I check? Match the model, pack size and hardware version to your installation. Use the official model page and downloads below to check accessories, regional compatibility and any version-specific requirements. Contact CCTV Guru if you need help confirming the right combination. Official videos & downloads Follow TP-Link’s official guidance for installation and setup. Match the hardware version on your device before downloading firmware. Regional versions and packaging can differ. How to Set Up Your Tapo Solar-Powered Pan/Tilt Security Camera Kit Open this official video on YouTube Official TC92 KIT product detailsTC92 KIT(EU) V1 DatasheetSolar-Powered Security Camera(KIT) Quick Installation Guide(EU1 12 Languages)TC92 KIT manuals, firmware & all downloads Free shipping over $180Orders over $180Tracked deliveryTracking emailed on dispatchProduct advicePhone, email & WhatsAppWarranty assistanceBack-to-base claims

    $349.00 $343.99

  • Save $10 The TP-Link Tapo TC90 KIT featuring the white pan and tilt smart security camera alongside its companion solar panel accessory. Front view of the Tapo TC90 smart camera, showcasing its motorized pan and tilt housing for 360-degree horizontal surveillance coverage.

    TP-Link TP-Link Tapo TC90 KIT Solar-Powered 2K 3MP Pan/Tilt Wi-Fi Camera Kit

    TAPO · SECURITY CAMERAS TP-Link Tapo TC90 KIT — Solar-Powered Pan/Tilt Security Camera Kit Keep an eye on the places that matter with the Tapo TC90 KIT. Check the viewing detail, connection and power requirements below, then use the official setup resources to plan its position and recording. Maximum Resolution 2K 3MP(2304×1296 px)Frame the important area carefully. Resolution helps show detail, while distance, lighting and subject movement affect what you can identify. Output Port Type-CCheck compatibility and signal at the intended position before permanent installation. The connection type does not determine the power supply. Weather Resistance IP65 for both camera and solar panelUse this specification to compare the TC90 KIT with the requirements of your intended location. Power Source Built-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201(included)Plan around this power requirement. Check the installation guide and keep charging or power connections accessible for maintenance. Designed for everyday use Place the view where it counts Test the live view at the intended mounting height before drilling. Check daytime and night-time visibility, keeping nearby reflective surfaces and strong glare out of the foreground. Set the camera angle around an entrance or activity area where useful detail matters most. Plan charging around your location Battery runtime changes with activity, live viewing, signal strength and temperature. Leave access for recharging and check battery status after installation. The included solar panel needs a suitable sunlit position; shade, weather and camera use affect how much charge it supplies. Make recordings easy to find Choose the supported local recording option and test playback after setup. Memory cards are separate unless explicitly included in your selected pack. Tapo Care cloud recording is an optional paid service where supported. Adjust notifications around useful activity so important events are easier to review. Technical details Specifications below follow TP-Link’s linked model page. Hardware revisions can differ; select the version printed on your device for firmware, capacity and compatibility details. ModelTapo TC90 KIT Night Vision2× 850 nm IR LEDs (33 ft / 10 m) Full-Color Night Vision Output PortType-C Maximum Resolution2K 3MP(2304×1296 px) Audio CommunicationTwo-Way Audio with Noise Cancellation Local StorageMicroSD Card Slot on Camera (Up to 512 GB, microSD card not included) Network ConnectivityConnect via Wi-Fi Wireless ConnectivityIEEE 802.11a/b/g/n, 2.4 GHz Power SourceBuilt-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201(included) Output VoltageAdapter Output: 5.0 V, 1.0 A (Not include) Solar Panel Max Charging Voltage: 5.2 V Solar Panel Max Charging Power: 2.5 W Weather ResistanceIP65 for both camera and solar panel Before you order Which version should I check? Match the model, pack size and hardware version to your installation. Use the official model page and downloads below to check accessories, regional compatibility and any version-specific requirements. Contact CCTV Guru if you need help confirming the right combination. Official videos & downloads Follow TP-Link’s official guidance for installation and setup. Match the hardware version on your device before downloading firmware. Regional versions and packaging can differ. How to Set Up Your Solar-Powered Pan/Tilt Security Camera Kit Open this official video on YouTube Official TC90 KIT product detailsTC90 KIT(EU) V1 DatasheetSolar-Powered Security Camera(KIT) Quick Installation Guide(EU1 12 Languages)TC90 KIT manuals, firmware & all downloads Free shipping over $180Orders over $180Tracked deliveryTracking emailed on dispatchProduct advicePhone, email & WhatsAppWarranty assistanceBack-to-base claims

    $230.00 $220.00

  • Tapo TC82 KIT smart solar-powered wire-free security camera with the included high-efficiency solar panel and mounting base. Unboxed components of the Tapo TC82 KIT showing the outdoor smart camera, companion solar panel, adjustable brackets, and mounting hardware.

    TP-Link TP-Link Tapo TC82 Kit Outdoor Wi-Fi Security Camera Starter Kit

    TAPO · SECURITY CAMERAS TP-Link Tapo TC82 KIT — Solar-Powered Security Camera Kit Keep an eye on the places that matter with the Tapo TC82 KIT. Check the viewing detail, connection and power requirements below, then use the official setup resources to plan its position and recording. Maximum Resolution 2K 3MP (2304 × 1296 px)Frame the important area carefully. Resolution helps show detail, while distance, lighting and subject movement affect what you can identify. Output Port Type-CCheck compatibility and signal at the intended position before permanent installation. The connection type does not determine the power supply. Weather Resistance IP65Use this specification to compare the TC82 KIT with the requirements of your intended location. Power Source Built-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201Plan around this power requirement. Check the installation guide and keep charging or power connections accessible for maintenance. Designed for everyday use Place the view where it counts Test the live view at the intended mounting height before drilling. Check daytime and night-time visibility, keeping nearby reflective surfaces and strong glare out of the foreground. Set the camera angle around an entrance or activity area where useful detail matters most. Plan charging around your location Battery runtime changes with activity, live viewing, signal strength and temperature. Leave access for recharging and check battery status after installation. The included solar panel needs a suitable sunlit position; shade, weather and camera use affect how much charge it supplies. Make recordings easy to find Choose the supported local recording option and test playback after setup. Memory cards are separate unless explicitly included in your selected pack. Tapo Care cloud recording is an optional paid service where supported. Adjust notifications around useful activity so important events are easier to review. Technical details Specifications below follow TP-Link’s linked model page. Hardware revisions can differ; select the version printed on your device for firmware, capacity and compatibility details. ModelTapo TC82 KIT Night Vision850 nm IR LED (30 ft / 9.1 m) Full-Color Night Vision Output PortType-C Maximum Resolution2K 3MP (2304 × 1296 px) Audio CommunicationTwo-Way Audio with Noise Cancellation Local StorageMicroSD Card Slot on Camera (Up to 512 GB) Network ConnectivityConnect via Wi-Fi Wireless ConnectivityIEEE 802.11b/g/n, 2.4 GHz Wi-Fi Power SourceBuilt-in Rechargeable Lithium-ion Battery Solar Panel: Tapo A201 Output VoltageAdapter Output: 5.0 V, 1.0 A Solar Panel Max Charging Voltage: 5.2 V Solar Panel Max Charging Power: 2.5 W Weather ResistanceIP65 Before you order Which version should I check? Match the model, pack size and hardware version to your installation. Use the official model page and downloads below to check accessories, regional compatibility and any version-specific requirements. Contact CCTV Guru if you need help confirming the right combination. Official videos & downloads Follow TP-Link’s official guidance for installation and setup. Match the hardware version on your device before downloading firmware. Regional versions and packaging can differ. How to Set Up Your Solar-Powered Security Camera Kit Open this official video on YouTube Official TC82 KIT product detailsTapo C410 KIT & TC82 KIT V2.20 DatasheetSolar-Powered Security Camera(KIT) Quick Installation Guide(EU1 12 Languages)TC82 KIT manuals, firmware & all downloads Free shipping over $180Orders over $180Tracked deliveryTracking emailed on dispatchProduct advicePhone, email & WhatsAppWarranty assistanceBack-to-base claims

    $155.30

  • Save $596 Solar Hikvision DS-2XS3Q47G1-LDW(H)/C18S40 4MP ColorVu solar pan-tilt camera with 40W panel — Australian stock Shop Hikvision DS-2XS3Q47G1-LDW(H)/C18S40 4MP ColorVu Solar-powered Security PT Camera Kit at CCTV Guru, Australia

    Hikvision Hikvision Solar PT Camera Bundle Kit — 4MP ColorVu, 40W Panel, 180Wh Battery, WiFi

    Hikvision Solar Bundle · 4MP ColorVu · Pan-Tilt · WiFi · Off-Grid Ready The Hikvision DS-2XS3Q47G1-LDW(H)/C18S40 Solar PT Bundle Kit is a complete off-grid 4MP security camera package — one box, ready to install at any remote Australian site that doesn't have mains power or wired internet. The kit pairs Hikvision's flagship ColorVu solar pan-tilt camera with a 40W solar panel, a 180Wh lithium battery, the Hikvision SMA antenna adapter and a roll of Hikvision AF003-100 waterproof sealing tape — everything needed to deploy a self-powered, weatherproof CCTV camera at farms, building sites, remote properties, paddocks, jetties, mine entrances or any location where running power and data isn't practical. Hikvision's ColorVu technology delivers true 24/7 full-colour video — no infrared black-and-white, no missed detail. The camera tracks across 340° pan + 110° tilt via its motorised PT head; the solar panel itself independently rotates to follow the sun for maximum daily charge. Built-in WiFi (no SIM card or cellular plan required), two-way audio, and Hik-Connect remote viewing from anywhere in Australia round out the kit. Backed by a 5-year Australian warranty. Power 40W Solar + 180Wh Battery Resolution 4MP ColorVu 24/7 Pan / Tilt 340° × 110° Motorised Connectivity Built-in WiFi · No SIM Everything in the box This is a true plug-and-play solar kit — three Hikvision-branded components packaged together so you can install at a remote site in a single afternoon, with no return trip for missing parts. 1 × Hikvision Solar PT Camera (DS-2XS3Q47G1-LDW(H)/C18S40) The main unit — 4MP 1/3" CMOS sensor, F1.0 ColorVu lens, 2.8mm fixed focal length, motorised pan-tilt head, dual lithium battery (8.4Ah × 2 packs ≈ 180Wh total), built-in WiFi, two-way audio, microSD slot, PIR-triggered recording and white-light deterrence built in. Ships fully assembled with mounting bracket and integrated 40W solar panel. 1 × Hikvision SMA Antenna Adapter (SMA-ADAPTER) SMA-M to RP-SMA-F adapter — lets you connect an aftermarket high-gain WiFi antenna if your install site has weak router signal. Useful for sites where the camera sits 30m+ from the nearest WiFi access point or behind dense foliage. 1 × Hikvision Waterproof Sealing Tape (AF003-100) Self-amalgamating sealing tape — wraps cable joins, antenna connections and bracket penetrations to maintain the camera's IP66 weatherproof rating after install. Australian outdoor conditions (sun, rain, dust) demand it — skip this step and the warranty can be voided. What you'll still need A microSD card (up to 512GB) for local recording, plus a basic mounting surface — wall, pole or beam. Optional: a higher-gain WiFi antenna (uses the included SMA adapter) and the Hik-Connect app installed on your iOS / Android phone for remote viewing. Why this kit suits Australian off-grid sites Most "solar security cameras" sold online are battery-only with a small panel barely able to keep up in winter. The Hikvision solar PT kit is fundamentally different — a 40W solar panel (3–4× the size of typical consumer kits) paired with two 8.4Ah lithium battery packs for serious off-grid endurance. Even in Australian winter conditions with cloudy days, the kit can deliver up to 6 days of proactive recording on battery alone, or 30 days in standby. For perpetual operation, the 40W panel typically generates a 24-hour energy surplus across most of mainland Australia. True 24/7 ColorVu Night Vision F1.0 ColorVu lens captures full-colour video down to 0.0005 Lux — the warm-white supplementary light only kicks in when needed. Capture the colour of clothing and vehicles, not just IR silhouettes. Active White-Light Deterrence Built-in white light flashes on PIR-triggered intrusion to physically deter intruders — turning the camera from passive observer into active deterrent at remote sites where response times are long. Motorised PT — Camera AND Panel Camera pans 0–340° and tilts -5° to 105° for full perimeter coverage. The solar panel itself also pans 0–358° and tilts -40° to 0° — so you can angle it for optimum sun capture independently of where the camera looks. Two-Way Audio & Talk-Down Built-in microphone and speaker let you challenge intruders live from your phone via Hik-Connect — *"You're being recorded, please leave"* — without needing to drive to site. Battery Life Tuned for Use Case Three power modes: Performance (3.6 days continuous), Proactive (6 days motion-triggered), or Standby (30 days low-activity). Match the mode to your site's activity level. Hik-Connect Remote Viewing Free iOS and Android app for live view, playback, two-way audio and push notifications — no cloud subscription, no static IP, no port forwarding required. Hikvision-grade hardware, Australian-grade support Every component in this kit is genuine Hikvision-branded — no third-party batteries, no aftermarket panels, no compatibility surprises. Ships from our Australian warehouse with the full 5-year Hikvision Australia warranty, local firmware, and on-the-phone tech support from our Sydney team when you need help with setup or troubleshooting at site. IP66 Weatherproof Rated for outdoor mounting in rain, dust and direct sun. The included waterproof sealing tape maintains the rating after install. microSD up to 512GB Local recording onto your own microSD card — typically 30+ days of motion-triggered footage at 4MP. Card sold separately. PIR-Triggered Recording True PIR sensor (not just video motion) reduces false triggers from leaves and shadows — meaning fewer wasted recordings and longer battery life. Hik-Connect App Free iOS / Android remote viewing — no static IP, no port forwarding, no monthly fees. Push notifications direct to your phone. Full technical specifications Hikvision Solar PT Bundle Kit — DS-2XS3Q47G1-LDW(H)/C18S40 Bundle SKU (Supplier) DS-2XS3Q47G1-LDWH-C18S40-B Bundle Contents 1 × Solar PT Camera · 1 × SMA-ADAPTER · 1 × AF003-100 Waterproof Sealing Tape Series Hikvision Solar-Powered Security Camera Setup Image Sensor 1/3" Progressive Scan CMOS Max. Resolution 2688 × 1520 (4 MP) Lens 2.8 mm fixed · F1.0 ColorVu Min. Illumination 0.0005 Lux @ F1.0 (AGC ON) · 0 Lux with supplementary light Day/Night 24/7 ColorVu — full-colour day and night via warm-light supplement Compression H.265+ / H.265 / H.264+ / H.264 Connectivity WiFi (2.4 GHz) · No SIM card or cellular plan required Antenna Port External RP-SMA · accepts higher-gain antenna via included SMA adapter Camera Pan / Tilt Pan 0–340° · Tilt -5° to 105° Solar Panel Pan / Tilt Pan 0–358° · Tilt -40° to 0° (independent of camera) Solar Panel Output 40 W Battery Lithium 9.0–12.6 V · 8.4 Ah × 2 packs (≈ 180 Wh total) Battery Life — Performance Mode 3.6 days continuous Battery Life — Proactive Mode 6 days motion-triggered Battery Life — Standby Mode 30 days low-activity Detection PIR sensor + video motion · Human / vehicle classification White-Light Deterrence Built-in white light (PIR-triggered) Audio Built-in microphone + speaker · Two-way audio via Hik-Connect Local Storage 1 × microSD slot · up to 512 GB (card sold separately) Protocols TCP/IP · HTTP · HTTPS · ICMP · DHCP · DNS · DDNS · ONVIF App Hik-Connect (iOS · Android) — free, no subscription Weatherproof Rating IP66 (maintained with included AF003-100 sealing tape) Operating Temperature −30 °C to 60 °C Mounting Wall · pole · beam (bracket included) Australian Warranty 5 Years — CCTV Guru / Hikvision Australia Downloads & resources Download official Hikvision documents for setup, specifications, and installation details. DS-2XS3Q47G1-LDW(H)/C18S40 Datasheet Quick Start Guide PDF User Manual PDF Dimension PNG Frequently asked questions Do I need a SIM card or mobile plan? No — this is the WiFi variant. The camera connects to your existing 2.4GHz WiFi network and uses Hik-Connect for remote viewing. No SIM, no cellular plan, no monthly fees. If you need a 4G/LTE version for sites without WiFi, ask us about the DS-2XS3Q47G1-LDH/4G variant. How far from my WiFi router can the camera be? Typical line-of-sight range is 30–40 m. For longer distances or obstacles in between, add a higher-gain external WiFi antenna using the included SMA adapter — extends range to 50–80 m+ depending on environment. Will the solar panel keep up year-round in Australia? Yes — the 40 W panel paired with 180 Wh of battery generates a daily energy surplus across most of mainland Australia (Sydney, Melbourne, Brisbane, Perth, Adelaide and most regional areas). Tasmania and far-southern sites in deep winter may need to switch from Performance to Proactive mode to extend run time. Why is the waterproof tape included? To maintain IP66 weatherproofing at the cable join and antenna connection after install. Without proper sealing, water ingress at those joints can void the warranty. The AF003-100 is Hikvision-branded self-amalgamating tape — peel, stretch, wrap. Does it record locally or to the cloud? Local microSD recording (up to 512 GB) — no cloud subscription. You can also stream live and play back via Hik-Connect on your phone. Card sold separately. What's the warranty and where does it ship from? 5 years Hikvision Australia warranty on the complete kit. Ships from our Sydney warehouse — most metro orders arrive in 1–3 business days, regional Australia 3–5 business days. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

    $2,431.00 $1,835.00

  • Dahua DH-BF4CP-XL/M0508 4MP Battery & Solar Wi-Fi Security Camera Kit — product view

    Dahua Dahua DH-BF4CP-XL/M0508 4MP Battery & Solar Wi-Fi Security Camera Kit

    DAHUA · WIRELESS SECURITY CAMERASDahua DH-BF4CP-XL/M0508 4MP Battery & Solar Wi-Fi Security Camera Kit Cover an entrance, shed or outbuilding without running a mains power cable to the camera. The Dahua DH-BF4CP-XL/M0508 combines a 4MP battery-powered Wi-Fi bullet camera with a supplied solar module, providing a compact solar security camera solution where a suitable Wi-Fi signal and sunlight are available. System DH-KIT/BF4CP-XL/M0508 solar monitoring kit Resolution 4MP, 2560 × 1440 at up to 15 fps Image sensor 1/3-inch CMOS Lens 2.1 mm fixed, F1.6 Designed for your installation A wide 122.5° horizontal view suits general property monitoring. PIR-assisted detection, human and vehicle classification, a built-in microphone and speaker, and warm-light illumination help you assess visitors and respond through compatible Dahua software. Field of view 122.5° horizontal, 66° vertical Night illumination Up to 15 m IR and 20 m warm light Wireless 2.4 GHz / 5 GHz Wi-Fi, Bluetooth-assisted pairing Detection PIR, human and vehicle classification, low-power AOV modes Technical Specifications Model DH-BF4CP-XL/M0508 System DH-KIT/BF4CP-XL/M0508 solar monitoring kit Resolution 4MP, 2560 × 1440 at up to 15 fps Image sensor 1/3-inch CMOS Lens 2.1 mm fixed, F1.6 Field of view 122.5° horizontal, 66° vertical Night illumination Up to 15 m IR and 20 m warm light Wireless 2.4 GHz / 5 GHz Wi-Fi, Bluetooth-assisted pairing Detection PIR, human and vehicle classification, low-power AOV modes Audio Built-in microphone and speaker, two-way talk Local storage microSD up to 512 GB, card sold separately Battery 32.4 Wh Charging input USB 5 VDC, 2 A Weather protection IP66 Operating temperature −20°C to +60°C Package Camera, solar module, power cable, mounting hardware and quick guide Setup and compatibility This is a Wi-Fi camera, not a 4G or PoE camera. Battery runtime and solar charging depend on sunlight, recording mode, activity and temperature. Position the solar panel for direct sun and check Wi-Fi coverage at the intended mounting point. Downloads DH-BF4CP-XL/M0508 Datasheet (PDF) Frequently asked questions Can DH-BF4CP-XL/M0508 record to a microSD card? Yes. microSD up to 512 GB, card sold separately. The card is separate; configure recording and retention for the installation. What should I check before installation? This is a Wi-Fi camera, not a 4G or PoE camera. Battery runtime and solar charging depend on sunlight, recording mode, activity and temperature. Position the solar panel for direct sun and check Wi-Fi coverage at the intended mounting point. Where can I download the DH-BF4CP-XL/M0508 datasheet? The manufacturer PDF is hosted on CCTV Guru’s Shopify file library and linked in Downloads on this product page.

    $189.00

  • Save $81 UDR7 + G6 Instant 2 or 4 camera pack — UniFi Protect home CCTV kit with built-in NVR and no subscription Ubiquiti Advanced Home Surveillance Bundle — UDR7 WiFi 7 router with G6 Instant 4K WiFi cameras, UniFi Protect kit

    Ubiquiti Ubiquiti Advanced Home Surveillance Bundle – UDR7 + G6 Instant 4K WiFi Camera Kit (UniFi Protect)

    UniFi Protect — NDAA Compliant UDR7 + G6 Instant 4K WiFi Camera Kit — Australian Stock & No Subscription Ubiquiti Advanced Home Surveillance Bundle — UDR7 + G6 Instant Cameras (UniFi Protect Kit) The Ubiquiti Advanced Home Surveillance Bundle is the easiest way to run a complete UniFi home network and security system from one box. It pairs the UniFi Dream Router 7 (UDR7) — a WiFi 7 router, security gateway, and built-in UniFi Protect NVR — with your choice of 2 or 4 G6 Instant 4K WiFi cameras. The cameras connect wirelessly and record locally to the UDR7 with no monthly subscription. Plug-and-play, NDAA compliant, and backed by genuine Ubiquiti stock with fast Australia-wide shipping. Cameras 4K / 8MP Router WiFi 7 Recording Built-in NVR Fees No Subscription What's in the Kit 1 × UniFi Dream Router 7 (UDR7) WiFi 7 router, security gateway, PoE switch & built-in UniFi Protect NVR with pre-installed 64 GB microSD 2 or 4 × UniFi G6 Instant (UVC-G6-INS-W) 4K WiFi cameras in White — choose the 2-camera or 4-camera pack above Camera Power & Cables Each camera includes a 5 V/2 A USB power adapter, 2 m USB-C cable, and wall-mount accessory Documentation Quick-start guides for the UDR7 and G6 Instant cameras Storage Note The UDR7 includes a 64 GB microSD — a larger high-endurance microSD card is recommended for longer Protect recording (sold separately) Why Choose This Bundle? One Box Runs Everything The UDR7 is your router, WiFi 7 access point, firewall, and UniFi Protect NVR in a single console — no separate recorder, modem-router, or cloud account needed. 4K Cameras, Plug-and-Play Each G6 Instant is a compact 4K (8MP) camera with a large 1/1.8″ sensor, Multi-TOPS AI, and two-way audio — connect over WiFi and place almost anywhere with the included USB power. Smart AI Detection On-camera AI detects people, vehicles, animals, faces, and number plates, sending only the alerts that matter straight to the UniFi Protect app. Local Recording, No Fees Footage records locally to the UDR7's built-in Protect NVR — private, subscription-free, and accessible live or on playback from your phone. Grows With You Start with 2 or 4 cameras and expand later — the UDR7 manages 30+ UniFi devices, so you can add cameras, switches, and access points over time. NDAA Compliant Both the UDR7 and G6 Instant are fully NDAA Section 889 compliant for security-conscious homes and businesses. UniFi Dream Router 7 (UDR7) — Specifications Type WiFi 7 UniFi OS console — router, gateway, PoE switch & Protect NVR UniFi Applications Network, Protect, Access, Talk, Connect WiFi WiFi 7 tri-band (2.4/5/6 GHz) • up to 5.7 Gbps (6 GHz) • 2×2 MU-MIMO • ~160 m² coverage Ports 1 × 10G SFP+ (WAN) • 4 × 2.5 GbE RJ45 (1 with PoE output, 15.4 W) IDS/IPS 2.3 Gbps NVR Storage Pre-installed 64 GB microSD • microSD expansion Managed Cameras Up to 5 HD / 2 × 2K / 1 × 4K (the G6 Instant records at up to 4K — plan storage accordingly) Power Universal AC 100–240 V, internal 50 W PSU Compliance NDAA compliant • CE, FCC, IC, Anatel UniFi G6 Instant (UVC-G6-INS) — Specifications Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED + IR cut filter, up to 6 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI) Audio Two-way audio Connectivity 802.11 a/b/g/n/ac WiFi + Bluetooth Power 5 V / 2 A USB-C (adapter included) • PoE-to-USB-C adapter optional • max 7 W Weatherproofing IPX5 • IK04 Storage MicroSD card slot (per camera) Mounting Wall-mount accessory included Dimensions / Weight 81.7 × 50.1 × 57.2 mm • 180 g Operating Temperature −20 to 40°C Compliance NDAA compliant • CE, FCC, IC, SRRC Downloads & Resources UDR7 Datasheet UDR7 Quick Start Guide UVC-G6-INS Datasheet G6 Instant Quick Start Guide Best For Homes & Apartments Whole-home WiFi 7 plus 4K cameras from one easy console — ideal for renters and homeowners. First-Time UniFi The simplest entry into the UniFi ecosystem — set up in minutes with the UniFi app. Indoor & Sheltered IPX5 cameras suit indoor rooms, entries, garages, and covered outdoor areas. Privacy-First Local recording with no monthly fees keeps your footage private and in your control. The G6 Instant cameras connect over WiFi to the UDR7 and record to its built-in UniFi Protect NVR. Storage is via microSD — the UDR7 ships with a 64 GB card; fit a larger high-endurance microSD for longer retention (sold separately). Each camera is powered by its included 5 V/2 A USB adapter; an optional PoE-to-USB-C adapter allows single-cable PoE installs. G6 Instant cameras are IPX5 (splash-resistant) — best for indoor and sheltered/covered outdoor locations. Frequently Asked Questions Does this kit need a subscription? No. The UDR7 records UniFi Protect footage locally with no monthly fees or cloud account required. Do I need a separate NVR? No. The UDR7 has a built-in UniFi Protect NVR. Just add a larger microSD card for more recording time. How do the cameras connect? The G6 Instant cameras connect over WiFi to the UDR7 and are powered by the included USB adapters (or an optional PoE-to-USB-C adapter). What's the difference between the 2 and 4 camera packs? Only the number of G6 Instant cameras — both packs include one UDR7. Choose 2 cameras for smaller homes or 4 for wider coverage. Can I use the cameras outdoors? They're IPX5 splash-resistant — ideal for indoor and sheltered/covered outdoor spots. For fully exposed outdoor areas, choose an IP66 camera like the G6 Bullet or Turret. Is this kit NDAA compliant? Yes. Both the UDR7 and G6 Instant are NDAA Section 889 compliant. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

    $1,299.00 - $2,099.00

  • Save $58.11 Eight VIGI Wi-Fi turret cameras with NVR1008H recorder; HDD sold separately

    TP-Link TP-Link VIGI 8-Camera 4MP Indoor Wi-Fi Turret CCTV Kit — C440-W 4mm + NVR1008H — No HDD

    TP-Link VIGI · Wi-Fi camera bundle TP-Link VIGI 8-Camera 4MP Indoor Wi-Fi Turret CCTV Kit — C440-W 4mm + NVR1008H — No HDD Eight Wi-Fi cameras and one local recorder for locations where camera network cabling is difficult, but power is available nearby. This kit uses your existing Wi-Fi network rather than a dedicated wireless recorder. Important: Cameras need plug-in power. The NVR needs an Ethernet connection to your router. Router, HDD and installation are sold separately. 8 × C440-W cameras 4MP indoor turret cameras with fixed 4mm lenses. Choose and aim each camera for the scene you need; camera count alone does not establish whole-property coverage. 2.4GHz Wi-Fi video Cameras connect to your local Wi-Fi network. Walls, distance, interference and other wireless traffic affect stability; test all eight streams together. Local NVR storage The eight-channel NVR1008H records to a separately purchased compatible SATA HDD. Choose capacity to suit the required retention period. Continuous plug-in power Each camera uses its supplied DC adapter. Wi-Fi replaces the camera data cable, not the power connection. Plan suitable nearby outlets. Exactly what is included A CCTV Guru component bundle: eight VIGI C440-W 4mm cameras with their manufacturer-supplied adapters and standard mounting accessories, plus one VIGI NVR1008H recorder with its standard package accessories. No HDD is included. 8 × VIGI C440-W · 4mm Wi-Fi camera Camera power adapters included 1 × VIGI NVR1008H · 8-channel recorder Ethernet network connection; no built-in Wi-Fi How this wireless kit connects Camera → 2.4GHz Wi-Fi router/access point → Ethernet → NVR1008H. The router or access point is not included. Place the recorder near an available network port and keep cameras reachable on the same local network. Guest-network isolation can prevent discovery and recording. The NVR is not a Wi-Fi hotspot and the kit is not advertised as a pre-paired wireless NVR package. Configure camera Wi-Fi first, add the cameras to the recorder and test recording before final mounting. Choose the right installation The C440-W uses a fixed 4mm lens, supports two-way audio and is intended for indoor installation; no ingress-protection rating is published. Colour night imaging depends on available or supplemental light. Check moving subjects at night as well as daytime live view. These cameras and their power adapters must be kept dry; do not use them in exposed outdoor positions. Protect electrical connections and use a suitable installer where required. Power supplies and storage limits vary by hardware version; use the device label and matching manufacturer documentation. Wi-Fi reliability matters Eight continuous camera streams put a sustained load on the 2.4GHz wireless network. Do not assume one router will reliably cover eight camera positions. Consider multiple suitably positioned access points with wired backhaul, coordinated channels and a shared local network. Test all eight main streams together at the intended recording bitrate before final installation. Check signal quality at the actual mounting locations, especially through brick walls, metal structures and outbuildings. A fast internet plan does not fix weak local Wi-Fi. If a position has unreliable coverage, improve the access-point placement or consider wired networking. Wi-Fi or local network outages interrupt delivery to the recorder. This kit does not promise automatic recovery of missed NVR footage from a camera memory card. Storage and expansion The NVR1008H has eight recording channels and an 80Mbps incoming bandwidth rating. All eight channels are used by this kit. It has a SATA interface for a compatible HDD; recording requires an installed and initialised drive. Select HDD capacity for camera bitrate, activity, recording schedule and desired retention. HDDs and microSD cards are separate purchases. Local recording needs no cloud-recording subscription, while remote viewing requires a working internet connection and account setup. Before installation Confirm eight suitable power points, reliable 2.4GHz Wi-Fi coverage, a router LAN port for the NVR, a compatible HDD and a secure indoor recorder location. A monitor, display cable, network patch lead, UPS, junction boxes and installation labour are not included as added kit items. Bench-test all eight cameras and the recorder first. Set strong passwords, correct time and recording schedules, then check playback and export a test clip. Apply only firmware intended for the exact hardware revision and region.Technical specifications Cameras8 × VIGI C440-W(4mm), 4MP Camera connection2.4GHz Wi-Fi; local DC power Camera housingIndoor; no published IP rating AudioBuilt-in microphone and speaker; two-way audio RecorderVIGI NVR1008H; eight channels; Ethernet LAN StorageHDD sold separately Spare NVR channelsNone with all eight included cameras connectedComplete your Wi-Fi installation These optional accessories are sold separately and are not included in the kit price. Surveillance recording storage 2TB surveillance HDD — GR-HDD-2TB. Install and initialise a compatible HDD before recording to the NVR. Choose capacity to suit your recording needs and the recorder's hardware limits. Wi-Fi router TP-Link Archer AX55 provides compatible 2.4GHz Wi-Fi and Ethernet LAN ports. Connect the NVR by Ethernet and join all eight cameras to the same local network using compatible WPA2 security. An existing suitable router may be used instead. Check signal at each camera position; coverage is site-dependent. Backup power Dahua DH-PFM3350-600 UPS is an optional backup for the recorder and router, subject to connected load and socket requirements. Runtime varies. Cameras powered from other outlets need their own backup to keep streaming during an outage. Power outlets and surge protection PowerShield ZapGuard 5-way powerboard offers extra indoor outlets and surge protection; it is not a battery backup. Each camera needs a suitable power point for its supplied adapter. Fixed outlet installation is separate. Do not daisy-chain powerboards or connect a surge board to a UPS unless the UPS manufacturer permits it. Questions answered Are these cameras completely wire-free? No. The C440-W cameras send video over 2.4GHz Wi-Fi but need continuous plug-in power using their supplied adapters. They are not battery or solar cameras. Does the recorder have built-in Wi-Fi? No. The NVR1008H connects by Ethernet to your router or network switch. The cameras join a compatible 2.4GHz Wi-Fi network on the same local network. Is a router or access point included? No. Use your existing compatible router or access point, or purchase one separately. Confirm reliable Wi-Fi coverage at every camera position and allow the cameras to communicate with the recorder. Is a hard drive included? No. A compatible surveillance HDD is sold separately. Install and initialise it in the NVR before recording footage to the recorder. Can I add a ninth camera? The included NVR1008H supports eight camera channels, all used by this kit. Recording more cameras requires a recorder upgrade or an additional recorder. Will recording work if the internet goes down? Local NVR recording can continue with a fitted HDD while camera power, local Wi-Fi, the router or access point and the recorder remain working. Remote viewing needs an internet connection. What happens if a camera loses Wi-Fi? The NVR cannot record a camera stream while that connection is unavailable. Reposition or improve Wi-Fi coverage before installation. Do not assume camera memory-card recordings automatically fill gaps in the NVR timeline. Are power adapters included? The manufacturer lists a power adapter in each camera package. Use the supplied adapter matched to the exact hardware version and protect adapters and connections appropriately. Suitable power outlets must be available at each camera location. Official resources and optional storage Select the exact hardware version before downloading firmware or following version-specific instructions. C440-W official specifications C440-W datasheets by hardware version C440-W manuals, setup videos and firmware NVR1008H specifications NVR1008H manuals and downloads Choose a separately sold surveillance HDD Specified component modelsWarranty enquiries: CCTV GuruModel-specific setup resources

    $1,162.18 $1,104.07

  • Save $64.13 Eight VIGI Wi-Fi bullet cameras with NVR1008H recorder; HDD sold separately

    TP-Link TP-Link VIGI 8-Camera 4MP Wi-Fi Bullet CCTV Kit — C340-W 4mm + NVR1008H — No HDD

    TP-Link VIGI · Wi-Fi camera bundle TP-Link VIGI 8-Camera 4MP Wi-Fi CCTV Kit — C340-W 4mm + NVR1008H — No HDD Eight Wi-Fi cameras and one local recorder for locations where camera network cabling is difficult, but power is available nearby. This kit uses your existing Wi-Fi network rather than a dedicated wireless recorder. Important: Cameras need plug-in power. The NVR needs an Ethernet connection to your router. Router, HDD and installation are sold separately. 8 × C340-W cameras 4MP bullet cameras with fixed 4mm lenses. Choose and aim each camera for the scene you need; camera count alone does not establish whole-property coverage. 2.4GHz Wi-Fi video Cameras connect to your local Wi-Fi network. Walls, distance, interference and other wireless traffic affect stability; test all eight streams together. Local NVR storage The eight-channel NVR1008H records to a separately purchased compatible SATA HDD. Choose capacity to suit the required retention period. Continuous plug-in power Each camera uses its supplied DC adapter. Wi-Fi replaces the camera data cable, not the power connection. Plan suitable nearby outlets. Exactly what is included A CCTV Guru component bundle: eight VIGI C340-W 4mm cameras with their manufacturer-supplied adapters and standard mounting accessories, plus one VIGI NVR1008H recorder with its standard package accessories. No HDD is included. 8 × VIGI C340-W · 4mm Wi-Fi camera Camera power adapters included 1 × VIGI NVR1008H · 8-channel recorder Ethernet network connection; no built-in Wi-Fi How this wireless kit connects Camera → 2.4GHz Wi-Fi router/access point → Ethernet → NVR1008H. The router or access point is not included. Place the recorder near an available network port and keep cameras reachable on the same local network. Guest-network isolation can prevent discovery and recording. The NVR is not a Wi-Fi hotspot and the kit is not advertised as a pre-paired wireless NVR package. Configure camera Wi-Fi first, add the cameras to the recorder and test recording before final mounting. Choose the right installation The C340-W uses a fixed 4mm lens, supports two-way audio and has an IP66 camera housing. Colour night imaging depends on available or supplemental light. Check moving subjects at night as well as daytime live view. A weather-rated camera does not make its plug-in adapter or socket weatherproof. Protect electrical connections and use a suitable installer where required. Power supplies and storage limits vary by hardware version; use the device label and matching manufacturer documentation. Wi-Fi reliability matters Eight continuous camera streams put a sustained load on the 2.4GHz wireless network. Do not assume one router will reliably cover eight camera positions. Consider multiple suitably positioned access points with wired backhaul, coordinated channels and a shared local network. Test all eight main streams together at the intended recording bitrate before final installation. Check signal quality at the actual mounting locations, especially through brick walls, metal structures and outbuildings. A fast internet plan does not fix weak local Wi-Fi. If a position has unreliable coverage, improve the access-point placement or consider wired networking. Wi-Fi or local network outages interrupt delivery to the recorder. This kit does not promise automatic recovery of missed NVR footage from a camera memory card. Storage and expansion The NVR1008H has eight recording channels and an 80Mbps incoming bandwidth rating. All eight channels are used by this kit. It has a SATA interface for a compatible HDD; recording requires an installed and initialised drive. Select HDD capacity for camera bitrate, activity, recording schedule and desired retention. HDDs and microSD cards are separate purchases. Local recording needs no cloud-recording subscription, while remote viewing requires a working internet connection and account setup. Before installation Confirm eight suitable power points, reliable 2.4GHz Wi-Fi coverage, a router LAN port for the NVR, a compatible HDD and a secure indoor recorder location. A monitor, display cable, network patch lead, UPS, junction boxes and installation labour are not included as added kit items. Bench-test all eight cameras and the recorder first. Set strong passwords, correct time and recording schedules, then check playback and export a test clip. Apply only firmware intended for the exact hardware revision and region.Technical specifications Cameras8 × VIGI C340-W(4mm), 4MP Camera connection2.4GHz Wi-Fi; local DC power Camera housingIP66 AudioBuilt-in microphone and speaker; two-way audio RecorderVIGI NVR1008H; eight channels; Ethernet LAN StorageHDD sold separately Spare NVR channelsNone with all eight included cameras connectedComplete your Wi-Fi installation These optional accessories are sold separately and are not included in the kit price. Surveillance recording storage 2TB surveillance HDD — GR-HDD-2TB. Install and initialise a compatible HDD before recording to the NVR. Choose capacity to suit your recording needs and the recorder's hardware limits. Wi-Fi router TP-Link Archer AX55 provides compatible 2.4GHz Wi-Fi and Ethernet LAN ports. Connect the NVR by Ethernet and join all eight cameras to the same local network using compatible WPA2 security. An existing suitable router may be used instead. Check signal at each camera position; coverage is site-dependent. Backup power Dahua DH-PFM3350-600 UPS is an optional backup for the recorder and router, subject to connected load and socket requirements. Runtime varies. Cameras powered from other outlets need their own backup to keep streaming during an outage. Power outlets and surge protection PowerShield ZapGuard 5-way powerboard offers extra indoor outlets and surge protection; it is not a battery backup. Each camera needs a suitable power point for its supplied adapter. Fixed outlet installation is separate. Do not daisy-chain powerboards or connect a surge board to a UPS unless the UPS manufacturer permits it. Questions answered Are these cameras completely wire-free? No. The C340-W cameras send video over 2.4GHz Wi-Fi but need continuous plug-in power using their supplied adapters. They are not battery or solar cameras. Does the recorder have built-in Wi-Fi? No. The NVR1008H connects by Ethernet to your router or network switch. The cameras join a compatible 2.4GHz Wi-Fi network on the same local network. Is a router or access point included? No. Use your existing compatible router or access point, or purchase one separately. Confirm reliable Wi-Fi coverage at every camera position and allow the cameras to communicate with the recorder. Is a hard drive included? No. A compatible surveillance HDD is sold separately. Install and initialise it in the NVR before recording footage to the recorder. Can I add a ninth camera? The included NVR1008H supports eight camera channels, all used by this kit. Recording more cameras requires a recorder upgrade or an additional recorder. Will recording work if the internet goes down? Local NVR recording can continue with a fitted HDD while camera power, local Wi-Fi, the router or access point and the recorder remain working. Remote viewing needs an internet connection. What happens if a camera loses Wi-Fi? The NVR cannot record a camera stream while that connection is unavailable. Reposition or improve Wi-Fi coverage before installation. Do not assume camera memory-card recordings automatically fill gaps in the NVR timeline. Are power adapters included? The manufacturer lists a power adapter in each camera package. Use the supplied adapter matched to the exact hardware version and protect adapters and connections appropriately. Suitable power outlets must be available at each camera location. Official resources and optional storage Select the exact hardware version before downloading firmware or following version-specific instructions. C340-W official specifications C340-W 4mm V2.20 datasheet C340-W manuals, setup videos and firmware NVR1008H specifications NVR1008H manuals and downloads Choose a separately sold surveillance HDD Specified component modelsWarranty enquiries: CCTV GuruModel-specific setup resources

    $1,282.66 $1,218.53

  • Save $31.25 Four VIGI C440-W Wi-Fi turret cameras with one NVR1004H recorder; HDD sold separately

    TP-Link TP-Link VIGI 4-Camera 4MP Indoor Wi-Fi Turret CCTV Kit — C440-W 4mm + NVR1004H — No HDD

    TP-Link VIGI · Wi-Fi camera bundle TP-Link VIGI 4-Camera 4MP Indoor Wi-Fi Turret CCTV Kit — C440-W 4mm + NVR1004H — No HDD Four Wi-Fi cameras and one local recorder for locations where camera network cabling is difficult, but power is available nearby. This kit uses your existing Wi-Fi network rather than a dedicated wireless recorder. Important: Cameras need plug-in power. The NVR needs an Ethernet connection to your router. Router, HDD and installation are sold separately. 4 × C440-W cameras 4MP indoor turret cameras with fixed 4mm lenses. Choose and aim each camera for the scene you need; camera count alone does not establish whole-property coverage. 2.4GHz Wi-Fi video Cameras connect to your local Wi-Fi network. Walls, distance, interference and other wireless traffic affect stability; test all four streams together. Local NVR storage The four-channel NVR1004H records to a separately purchased compatible SATA HDD. Choose capacity to suit the required retention period. Continuous plug-in power Each camera uses its supplied DC adapter. Wi-Fi replaces the camera data cable, not the power connection. Plan suitable nearby outlets. Exactly what is included A CCTV Guru component bundle: four VIGI C440-W 4mm cameras with their manufacturer-supplied adapters and standard mounting accessories, plus one VIGI NVR1004H recorder with its standard package accessories. No HDD is included. 4 × VIGI C440-W · 4mm Wi-Fi camera Camera power adapters included 1 × VIGI NVR1004H · 4-channel recorder Ethernet network connection; no built-in Wi-Fi How this wireless kit connects Camera → 2.4GHz Wi-Fi router/access point → Ethernet → NVR1004H. The router or access point is not included. Place the recorder near an available network port and keep cameras reachable on the same local network. Guest-network isolation can prevent discovery and recording. The NVR is not a Wi-Fi hotspot and the kit is not advertised as a pre-paired wireless NVR package. Configure camera Wi-Fi first, add the cameras to the recorder and test recording before final mounting. Choose the right installation The C440-W uses a fixed 4mm lens, supports two-way audio and is intended for indoor installation; no ingress-protection rating is published. Colour night imaging depends on available or supplemental light. Check moving subjects at night as well as daytime live view. These cameras and their power adapters must be kept dry; do not use them in exposed outdoor positions. Protect electrical connections and use a suitable installer where required. Power supplies and storage limits vary by hardware version; use the device label and matching manufacturer documentation. Wi-Fi reliability matters Four continuous camera streams put a sustained load on the wireless network. Check signal quality at the actual mounting locations, especially through brick walls, metal structures and outbuildings. A fast internet plan does not fix weak local Wi-Fi. If a position has unreliable coverage, improve the access-point placement or consider wired networking. Wi-Fi or local network outages interrupt delivery to the recorder. This kit does not promise automatic recovery of missed NVR footage from a camera memory card. Storage and expansion The NVR1004H has four recording channels and an 80Mbps incoming bandwidth rating. All four channels are used by this kit. It has a SATA interface for a compatible HDD; recording requires an installed and initialised drive. Select HDD capacity for camera bitrate, activity, recording schedule and desired retention. HDDs and microSD cards are separate purchases. Local recording needs no cloud-recording subscription, while remote viewing requires a working internet connection and account setup. Before installation Confirm four suitable power points, reliable 2.4GHz Wi-Fi coverage, a router LAN port for the NVR, a compatible HDD and a secure indoor recorder location. A monitor, display cable, network patch lead, UPS, junction boxes and installation labour are not included as added kit items. Bench-test all four cameras and the recorder first. Set strong passwords, correct time and recording schedules, then check playback and export a test clip. Apply only firmware intended for the exact hardware revision and region.Technical specifications Cameras4 × VIGI C440-W(4mm), 4MP Camera connection2.4GHz Wi-Fi; local DC power Camera housingIndoor; no published IP rating AudioBuilt-in microphone and speaker; two-way audio RecorderVIGI NVR1004H; four channels; Ethernet LAN StorageHDD sold separately Spare NVR channelsNone with all four included cameras connectedComplete your Wi-Fi installation These optional accessories are sold separately and are not included in the kit price. Surveillance recording storage 2TB surveillance HDD — GR-HDD-2TB. Install and initialise a compatible HDD before recording to the NVR. Choose capacity to suit your recording needs and the recorder's hardware limits. Wi-Fi router TP-Link Archer AX55 provides compatible 2.4GHz Wi-Fi and Ethernet LAN ports. Connect the NVR by Ethernet and join all four cameras to the same local network using compatible WPA2 security. An existing suitable router may be used instead. Check signal at each camera position; coverage is site-dependent. Backup power Dahua DH-PFM3350-600 UPS is an optional backup for the recorder and router, subject to connected load and socket requirements. Runtime varies. Cameras powered from other outlets need their own backup to keep streaming during an outage. Power outlets and surge protection PowerShield ZapGuard 5-way powerboard offers extra indoor outlets and surge protection; it is not a battery backup. Each camera needs a suitable power point for its supplied adapter. Fixed outlet installation is separate. Do not daisy-chain powerboards or connect a surge board to a UPS unless the UPS manufacturer permits it. Questions answered Are these cameras completely wire-free? No. The C440-W cameras send video over 2.4GHz Wi-Fi but need continuous plug-in power using their supplied adapters. They are not battery or solar cameras. Does the recorder have built-in Wi-Fi? No. The NVR1004H connects by Ethernet to your router or network switch. The cameras join a compatible 2.4GHz Wi-Fi network on the same local network. Is a router or access point included? No. Use your existing compatible router or access point, or purchase one separately. Confirm reliable Wi-Fi coverage at every camera position and allow the cameras to communicate with the recorder. Is a hard drive included? No. A compatible surveillance HDD is sold separately. Install and initialise it in the NVR before recording footage to the recorder. Can I add a fifth camera? The included NVR1004H supports four camera channels, all used by this kit. Recording more cameras requires a recorder upgrade or an additional recorder. Will recording work if the internet goes down? Local NVR recording can continue with a fitted HDD while camera power, local Wi-Fi, the router or access point and the recorder remain working. Remote viewing needs an internet connection. What happens if a camera loses Wi-Fi? The NVR cannot record a camera stream while that connection is unavailable. Reposition or improve Wi-Fi coverage before installation. Do not assume camera memory-card recordings automatically fill gaps in the NVR timeline. Are power adapters included? The manufacturer lists a power adapter in each camera package. Use the supplied adapter matched to the exact hardware version and protect adapters and connections appropriately. Suitable power outlets must be available at each camera location. Official resources and optional storage Select the exact hardware version before downloading firmware or following version-specific instructions. C440-W official specifications C440-W datasheets by hardware version C440-W manuals, setup videos and firmware NVR1004H specifications NVR1004H manuals and downloads Choose a separately sold surveillance HDD Specified component modelsWarranty enquiries: CCTV GuruModel-specific setup resources

    $625.09 $593.84

  • Save $36.33 Four VIGI C340-W bullet cameras and NVR1004H recorder VIGI NVR1004H 4 Channel Network Video Recorder by TP-Link Australia.

    TP-Link TP-Link VIGI 4-Camera 4MP Wi-Fi CCTV Kit — C340-W 4mm + NVR1004H — No HDD

    TP-Link VIGI · Wi-Fi camera bundle TP-Link VIGI 4-Camera 4MP Wi-Fi CCTV Kit — C340-W 4mm + NVR1004H — No HDD Four Wi-Fi cameras and one local recorder for locations where camera network cabling is difficult, but power is available nearby. This kit uses your existing Wi-Fi network rather than a dedicated wireless recorder. Important: Cameras need plug-in power. The NVR needs an Ethernet connection to your router. Router, HDD and installation are sold separately. 4 × C340-W cameras 4MP bullet cameras with fixed 4mm lenses. Choose and aim each camera for the scene you need; camera count alone does not establish whole-property coverage. 2.4GHz Wi-Fi video Cameras connect to your local Wi-Fi network. Walls, distance, interference and other wireless traffic affect stability; test all four streams together. Local NVR storage The four-channel NVR1004H records to a separately purchased compatible SATA HDD. Choose capacity to suit the required retention period. Continuous plug-in power Each camera uses its supplied DC adapter. Wi-Fi replaces the camera data cable, not the power connection. Plan suitable nearby outlets. Exactly what is included A CCTV Guru component bundle: four VIGI C340-W 4mm cameras with their manufacturer-supplied adapters and standard mounting accessories, plus one VIGI NVR1004H recorder with its standard package accessories. No HDD is included. 4 × VIGI C340-W · 4mm Wi-Fi camera Camera power adapters included 1 × VIGI NVR1004H · 4-channel recorder Ethernet network connection; no built-in Wi-Fi How this wireless kit connects Camera → 2.4GHz Wi-Fi router/access point → Ethernet → NVR1004H. The router or access point is not included. Place the recorder near an available network port and keep cameras reachable on the same local network. Guest-network isolation can prevent discovery and recording. The NVR is not a Wi-Fi hotspot and the kit is not advertised as a pre-paired wireless NVR package. Configure camera Wi-Fi first, add the cameras to the recorder and test recording before final mounting. Choose the right installation The C340-W uses a fixed 4mm lens, supports two-way audio and has an IP66 camera housing. Colour night imaging depends on available or supplemental light. Check moving subjects at night as well as daytime live view. A weather-rated camera does not make its plug-in adapter or socket weatherproof. Protect electrical connections and use a suitable installer where required. Power supplies and storage limits vary by hardware version; use the device label and matching manufacturer documentation. Wi-Fi reliability matters Four continuous camera streams put a sustained load on the wireless network. Check signal quality at the actual mounting locations, especially through brick walls, metal structures and outbuildings. A fast internet plan does not fix weak local Wi-Fi. If a position has unreliable coverage, improve the access-point placement or consider wired networking. Wi-Fi or local network outages interrupt delivery to the recorder. This kit does not promise automatic recovery of missed NVR footage from a camera memory card. Storage and expansion The NVR1004H has four recording channels and an 80Mbps incoming bandwidth rating. All four channels are used by this kit. It has a SATA interface for a compatible HDD; recording requires an installed and initialised drive. Select HDD capacity for camera bitrate, activity, recording schedule and desired retention. HDDs and microSD cards are separate purchases. Local recording needs no cloud-recording subscription, while remote viewing requires a working internet connection and account setup. Before installation Confirm four suitable power points, reliable 2.4GHz Wi-Fi coverage, a router LAN port for the NVR, a compatible HDD and a secure indoor recorder location. A monitor, display cable, network patch lead, UPS, junction boxes and installation labour are not included as added kit items. Bench-test all four cameras and the recorder first. Set strong passwords, correct time and recording schedules, then check playback and export a test clip. Apply only firmware intended for the exact hardware revision and region.Technical specifications Cameras4 × VIGI C340-W(4mm), 4MP Camera connection2.4GHz Wi-Fi; local DC power Camera housingIP66 AudioBuilt-in microphone and speaker; two-way audio RecorderVIGI NVR1004H; four channels; Ethernet LAN StorageHDD sold separately Spare NVR channelsNone with all four included cameras connectedComplete your Wi-Fi installation These optional accessories are sold separately and are not included in the kit price. Surveillance recording storage 2TB surveillance HDD — GR-HDD-2TB. Install and initialise a compatible HDD before recording to the NVR. Choose capacity to suit your recording needs and the recorder's hardware limits. Wi-Fi router TP-Link Archer AX55 provides compatible 2.4GHz Wi-Fi and Ethernet LAN ports. Connect the NVR by Ethernet and join all four cameras to the same local network using compatible WPA2 security. An existing suitable router may be used instead. Check signal at each camera position; coverage is site-dependent. Backup power Dahua DH-PFM3350-600 UPS is an optional backup for the recorder and router, subject to connected load and socket requirements. Runtime varies. Cameras powered from other outlets need their own backup to keep streaming during an outage. Power outlets and surge protection PowerShield ZapGuard 5-way powerboard offers extra indoor outlets and surge protection; it is not a battery backup. Each camera needs a suitable power point for its supplied adapter. Fixed outlet installation is separate. Do not daisy-chain powerboards or connect a surge board to a UPS unless the UPS manufacturer permits it. Questions answered Are these cameras completely wire-free? No. The C340-W cameras send video over 2.4GHz Wi-Fi but need continuous plug-in power using their supplied adapters. They are not battery or solar cameras. Does the recorder have built-in Wi-Fi? No. The NVR1004H connects by Ethernet to your router or network switch. The cameras join a compatible 2.4GHz Wi-Fi network on the same local network. Is a router or access point included? No. Use your existing compatible router or access point, or purchase one separately. Confirm reliable Wi-Fi coverage at every camera position and allow the cameras to communicate with the recorder. Is a hard drive included? No. A compatible surveillance HDD is sold separately. Install and initialise it in the NVR before recording footage to the recorder. Can I add a fifth camera? The included NVR1004H supports four camera channels, all used by this kit. Recording more cameras requires a recorder upgrade or an additional recorder. Will recording work if the internet goes down? Local NVR recording can continue with a fitted HDD while camera power, local Wi-Fi, the router or access point and the recorder remain working. Remote viewing needs an internet connection. What happens if a camera loses Wi-Fi? The NVR cannot record a camera stream while that connection is unavailable. Reposition or improve Wi-Fi coverage before installation. Do not assume camera memory-card recordings automatically fill gaps in the NVR timeline. Are power adapters included? The manufacturer lists a power adapter in each camera package. Use the supplied adapter matched to the exact hardware version and protect adapters and connections appropriately. Suitable power outlets must be available at each camera location. Official resources and optional storage Select the exact hardware version before downloading firmware or following version-specific instructions. C340-W official specifications C340-W 4mm V2.20 datasheet C340-W manuals, setup videos and firmware NVR1004H specifications NVR1004H manuals and downloads Choose a separately sold surveillance HDD Specified component modelsWarranty enquiries: CCTV GuruModel-specific setup resources

    $685.33 $649.00

The Best Security Brands