Long-Range Wi-Fi 6 for Australian Outdoor Environments The TP-Link EAP610-Outdoor is a professional-grade AX1800 dual-band Wi-Fi 6 access point built for demanding outdoor deployments. With a fully sealed IP67 weatherproof enclosure, high-power amplifier, and external high-gain antennas, it delivers reliable wireless coverage across car parks, school grounds, warehouse yards, hospitality venues, and large residential properties — powered over a single Cat6 cable via 802.3at PoE. Integrates natively into the TP-Link Omada SDN ecosystem for centralised cloud or on-premises management, seamless fast roaming, and wireless mesh backhaul where cabling isn’t possible. Key Features Wi-Fi 6 (AX1800) Dual-Band — Up to 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz — nearly 3× the throughput of Wi-Fi 5 with significantly better performance in high-device-count environments. OFDMA & 4× MU-MIMO — Serves multiple devices simultaneously rather than sequentially, reducing latency and congestion in dense outdoor environments such as car parks, school ovals, and event spaces. IP67 Weatherproof — Fully sealed against dust and water immersion. Rated for continuous outdoor use in all Australian conditions including coastal salt air, tropical rain, and extreme heat. Operating range −30°C to +70°C. High-Power Amplifier & External Antennas — 2× 4 dBi antennas on 2.4 GHz and 2× 5 dBi antennas on 5 GHz extend coverage significantly beyond standard indoor APs. Expect 100–200m+ radius in open outdoor areas. 802.3at PoE Powered — Single Cat6 cable carries both data and power (max 12.5W). No separate power run or electrician required for most installations. Passive PoE adapter (48V/0.5A) included. Omada Mesh — Wireless Backhaul — Connect EAP access points wirelessly where running Cat6 cable is impractical, without losing centralised management or roaming capability. Seamless Fast Roaming (802.11r/k/v) — Clients roam between access points without dropping connections — critical for VoIP, video streams, and IoT devices moving across a site. Omada SDN — Centralised Management — Manage all APs, switches, and gateways from a single dashboard via cloud or on-premises Omada Controller. Zero-touch provisioning and real-time monitoring included. BSS Colouring — Reduces interference from neighbouring Wi-Fi networks in dense multi-AP deployments by tagging transmissions with a unique colour identifier. Pole & Wall Mounting Included — Mounting kits for both pole and wall installation, waterproof antenna connectors, and waterproof cable entry kit included in the box. Standalone or Controller Mode — Operates independently via web browser UI, or integrates into Omada SDN for enterprise-grade multi-site management. Use Cases Warehouses & Industrial Sites — Cover large open areas with a single AP over existing Cat6 infrastructure. Omada SDN manages multiple APs across the site from one dashboard. Schools & Universities — OFDMA and MU-MIMO handle hundreds of simultaneous student devices without lag. Fast roaming keeps devices connected as students move between buildings and outdoor areas. Hotels, Resorts & Caravan Parks — Extend reliable Wi-Fi to pool areas, outdoor dining, car parks, and cabins. Omada Mesh covers areas where cable runs aren’t feasible. Retail Forecourts & Shopping Centres — Cover outdoor retail areas, drive-throughs, and loading docks. IP67 handles weather exposure; Omada SDN provides multi-site management. Residential Properties & Acreage — Extend Wi-Fi to garages, sheds, pool areas, and outbuildings from a single PoE cable. Omada Mesh bridges to areas where cable can’t reach. CCTV & Security Installations — Provide reliable wireless backhaul for IP cameras in areas where running Cat6 to each camera is impractical. Pairs with TP-Link Omada switches and gateways for a fully managed network. Technical Specifications Specification Detail Model EAP610-Outdoor Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/g/b/a) Max Speed 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) = 1.8 Gbps Antennas 2.4 GHz: 2× 4 dBi  |  5 GHz: 2× 5 dBi (external waterproof) Wi-Fi Technologies OFDMA, MU-MIMO (4×), BSS Colouring, TWT, Beamforming Network Interface 1× Gigabit RJ45 (802.3at PoE + Passive PoE) Power Supply 802.3at PoE  |  48V/0.5A Passive PoE (adapter included) Max Power Consumption 12.5W Weatherproof Rating IP67 Operating Temperature −30°C to +70°C Dimensions 280.4 × 106.5 × 56.8 mm (excl. antenna & mounting kit) Weight 1.41 kg Mounting Pole mount & wall mount (kits included) Management Omada SDN (cloud & on-premises), standalone web UI Omada Mesh Yes — wireless backhaul between EAP access points Fast Roaming 802.11r / k / v Certifications CE, FCC, RCM (Australian) Package Contents Access Point, Passive PoE Adapter (48V/0.5A), Power Cord, Pole & Wall Mounting Kits, Waterproof Kit, Waterproof Antennas, Installation Guide Frequently Asked Questions Does the EAP610-Outdoor require an Omada Controller? No. It operates in standalone mode managed via a web browser with no controller needed. For multi-AP deployments, the free Omada Software Controller (runs on a PC or NAS), Omada Hardware Controller (OC200/OC300), or Omada Cloud provides centralised management, fast roaming, and mesh configuration. What PoE switch do I need? Any 802.3at (PoE+) switch or injector is compatible. The AP draws a maximum of 12.5W, so a standard PoE+ port is sufficient. A passive PoE adapter (48V/0.5A) is included in the box if you don’t have a PoE switch available. What outdoor range can I expect? In open outdoor environments, expect a coverage radius of 100–200m+ depending on obstructions, client devices, and interference. For large sites such as school grounds, caravan parks, or warehouse yards, deploy multiple EAP610-Outdoor units managed via Omada SDN for seamless roaming coverage across the entire area. Can I use Omada Mesh without running cable to every AP? Yes. Omada Mesh allows EAP access points to connect wirelessly to each other, extending coverage without a wired backhaul run. Note that wireless mesh does consume some bandwidth — wired connections are always preferred where cabling is practical. Is it compatible with other Omada devices? Yes. The EAP610-Outdoor integrates with all Omada SDN devices including Omada switches, gateways, and other EAP access points for a fully unified managed network. It can also be mixed with older Wi-Fi 5 EAP models in the same Omada deployment. Is it suitable for Australian coastal and tropical environments? Yes. The IP67 rating means it is fully sealed against dust ingress and water immersion. With an operating temperature range of −30°C to +70°C and waterproof antenna connectors and cable entry kit included, it is rated for coastal salt air, tropical rainfall, and extreme heat conditions common across Australia. Can I use this to support IP cameras wirelessly? Yes. The EAP610-Outdoor is well-suited as a wireless backhaul node for IP cameras in areas where running Cat6 to each camera is impractical. Pair with a VIGI NVR and TP-Link Omada switches for a fully managed wired and wireless security network.

Read more less

TP-Link TL-SG2016P — 16-Port Gigabit Smart Switch with 8-Port PoE+ The TP-Link TL-SG2016P JetStream is a compact, cost-effective smart switch designed for small to medium-sized businesses and surveillance deployments. With 8 PoE+ ports delivering up to 120W total, full Gigabit speeds across all 16 ports, and seamless integration into the Omada SDN platform, it simplifies network deployment and management without the complexity of a full L3 managed switch. Key Features 8× PoE+ Ports (802.3at/af): Power IP cameras, wireless access points, VoIP phones, and other PoE devices — up to 30W per port with a combined budget of 120W. Full Gigabit Connectivity: 8× Gigabit PoE+ ports and 8× Gigabit non-PoE ports provide high-speed wired connections for all devices. Omada SDN Integration: Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring via the Omada Controller or cloud portal. Omada App Support: Configure settings, monitor network status, and manage clients from your smartphone or tablet — iOS and Android compatible. Advanced Security: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication. QoS Optimisation: L2/L3/L4 QoS and IGMP Snooping prioritise voice and video traffic for smooth, uninterrupted performance. Simplified Cabling: Single Ethernet cable carries both data and power to PoE devices — reducing infrastructure costs and installation complexity. Use Cases IP CCTV & Surveillance: Power and connect up to 8 IP cameras from a single switch — no separate power injectors or additional cabling required. Small Business Networks: Provide reliable Gigabit connectivity for PCs, printers, IPTV, and PoE devices across a single floor or office. Wireless Access Point Deployment: Power and manage multiple Omada EAPs from one switch for seamless Wi-Fi coverage. VoIP & Unified Communications: QoS prioritisation ensures clear, reliable voice calls across your IP phone system. Retail & Hospitality: Compact 1U form factor fits neatly in small comms rooms or wall-mount enclosures for discreet deployment. Technical Specifications Category Specification Total Ports 16× Gigabit RJ45 PoE+ Ports 8× (IEEE 802.3at/af) Non-PoE Ports 8× Gigabit RJ45 PoE Budget 120W total, up to 30W per port Switching Capacity 32 Gbps Forwarding Rate 23.8 Mpps QoS L2/L3/L4, 802.1p CoS/DSCP Security ACL, 802.1X, DHCP Snooping, DoS Defence, Storm Control Management Omada App, Web GUI, Omada SDN Controller Weight 1.98 kg SKU / Part Number TL-SG2016P Barcode (EAN) 4897098689493 Downloads 📄 Download TL-SG2016P Datasheet (PDF) Frequently Asked Questions How many IP cameras can the TL-SG2016P power? Up to 8 IP cameras simultaneously via its PoE+ ports. With a 120W total budget and up to 30W per port, it comfortably supports standard IP cameras drawing 10–15W each. For larger camera counts, consider the TL-SG3452P with 48 PoE+ ports. What is the difference between a Smart Switch and a fully Managed Switch? A Smart Switch (like the TL-SG2016P) offers essential management features — VLANs, QoS, IGMP Snooping, and security — via a web GUI or Omada app, making it ideal for SMBs. A fully Managed Switch adds advanced features like static routing, CLI access, SNMP, and RMON for larger enterprise environments. Does this switch require the Omada Controller to operate? No. The TL-SG2016P can be managed in standalone mode via its web interface. The Omada Controller (hardware, software, or cloud-based) is optional and recommended for multi-device or multi-site deployments requiring centralised management. Is the TL-SG2016P compatible with non-TP-Link PoE devices? Yes. All PoE+ ports comply with IEEE 802.3at/af standards, ensuring compatibility with any standards-compliant PoE device — including IP cameras, access points, and VoIP phones from third-party manufacturers. Can I use this switch with Omada EAPs (wireless access points)? Yes. The TL-SG2016P is fully compatible with Omada EAPs and can power and manage them directly. When used with an Omada Controller, you gain centralised visibility and control over your entire wireless and wired network. What warranty applies in Australia? TP-Link products sold in Australia are covered by a standard manufacturer's warranty. Please contact us or refer to the product documentation for current warranty terms applicable to your purchase.

Read more less

High-Density 2.5G PoE+ Switching with 10G Uplinks and Full Cloud Management The TP-Link Omada SG3218XP-M2 is a rack-mountable L2+ managed switch designed for enterprise, campus, and ISP networks that demand high-throughput connectivity and centralised control. With 16 × 2.5G PoE+ ports, 8 of which deliver PoE+ power, and 2 × 10G SFP+ uplink ports, it provides the bandwidth and power headroom needed for modern Wi-Fi 6/6E access points, IP cameras, VoIP systems, and high-speed workstations — all managed through the Omada SDN platform from a single cloud interface. Key Features 16× 2.5G RJ45 Ports — Full 2.5 Gbps per port for high-throughput connections to Wi-Fi 6/6E APs, NVRs, workstations, and other 2.5G-capable devices 8× PoE+ Ports (802.3at) — Powers PoE+ devices including access points, IP cameras, and VoIP phones directly over Ethernet; total PoE budget supports mixed deployments 2× 10G SFP+ Uplink Ports — High-speed fibre or DAC uplinks to core switches or routers, with backward compatibility for Gigabit SFP modules Omada SDN Cloud Management — 100% centralised cloud management of switches, access points, and gateways from a single interface, accessible from anywhere via the Omada app or web portal L2+ Static Routing — Enables inter-VLAN routing within the switch for efficient network segmentation without a dedicated router Advanced QoS (L2–L4) — Prioritises voice, video, and critical data traffic by IP/MAC address, TCP/UDP port, or VLAN to ensure smooth, jitter-free performance Comprehensive Security — IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS protection, and 802.1X authentication with RADIUS/TACACS+ support Full L2 Feature Set — 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, LACP Link Aggregation, IGMP Snooping, Loopback Detection, and Cable Diagnostics ISP-Grade Features — 802.3ah OAM, DDM (Digital Diagnostic Monitoring), sFlow, QinQ, L2PT, PPPoE ID Insertion, and IGMP Authentication for service provider deployments IPv6 Ready — Dual IPv4/IPv6 stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery for next-generation network readiness Multi-User Management — Role-based access control with multi-level permissions for flexible network operation across teams Enterprise Management Interfaces — Web GUI, CLI, SNMP v1/v2c/v3, RMON, Dual Image, and Dual Configuration for maximum uptime and flexibility Typical Use Cases Enterprise LAN distribution or access layer with high-density Wi-Fi 6/6E AP deployments requiring 2.5G PoE+ connectivity Commercial CCTV and IP surveillance installations with multiple PoE-powered cameras and a central NVR Education and campus networks requiring centralised Omada SDN management across multiple sites Hospitality venues (hotels, resorts) deploying high-density wireless with centralised guest network control ISP aggregation and edge deployments leveraging QinQ, OAM, sFlow, and PPPoE ID Insertion SME and mid-market offices upgrading from Gigabit to 2.5G for faster wired workstation and NAS connectivity Technical Specifications Specification Detail Model SG3218XP-M2 RJ45 Ports 16× 2.5G (100M/1G/2.5G auto-negotiation) PoE Ports 8× PoE+ (IEEE 802.3at), ports 1–8 SFP+ Uplink Ports 2× 10G SFP+ (compatible with 1G SFP modules) Switch Type L2+ Managed Management Omada SDN (cloud & on-premises), Web GUI, CLI, SNMP v1/v2c/v3, RMON L2 Features 802.1Q VLAN, STP/RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, Loopback Detection, Cable Diagnostics L2+ Features Static Routing (inter-VLAN) QoS L2–L4 QoS, Voice VLAN, traffic prioritisation by IP/MAC/TCP/UDP/VLAN Security IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS Protection, 802.1X (RADIUS/TACACS+) ISP Features 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Authentication IPv6 Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Reliability Dual Image, Dual Configuration Form Factor Rack-mountable (1U) Weight 3.19 kg Barcode (EAN) 4897098689721 SKU SG3218XP-M2 Downloads SG3218XP-M2 Datasheet (PDF) Frequently Asked Questions What is the total PoE power budget? The SG3218XP-M2 provides PoE+ (802.3at) on ports 1–8. For the exact total PoE power budget, refer to the datasheet linked above or the TP-Link product page, as the budget determines how many high-wattage devices (such as PTZ cameras or Wi-Fi 6 APs) can be powered simultaneously. Can I manage this switch without the Omada cloud? Yes. The SG3218XP-M2 supports standalone web GUI management, CLI, and SNMP without requiring cloud connectivity. Omada SDN cloud management is optional and adds centralised multi-site control via the Omada app or web portal. Does it support inter-VLAN routing? Yes. The L2+ static routing feature enables inter-VLAN routing directly on the switch, allowing traffic to pass between VLANs without a dedicated router — useful for segmenting IoT, camera, and corporate traffic on the same physical infrastructure. Are the 10G SFP+ ports compatible with standard 1G SFP modules? Yes. The SFP+ uplink ports are backward compatible with standard 1G SFP modules, giving you flexibility to use existing fibre infrastructure while leaving room to upgrade to 10G when required. Is this switch suitable for CCTV and IP surveillance deployments? Yes. The combination of PoE+ ports, IGMP Snooping for multicast video streams, QoS prioritisation, and Omada centralised management makes the SG3218XP-M2 well-suited for commercial IP surveillance installations with multiple cameras and an NVR. What is DDM (Digital Diagnostic Monitoring)? DDM allows you to monitor the real-time status of SFP/SFP+ modules inserted into the switch, including temperature, voltage, bias current, and TX/RX power levels. You can also configure alarm and warning thresholds to receive alerts before a module fails.

Read more less

TP-Link Omada ER8411 Enterprise VPN Router with 10G Ports Enterprise-Grade 10G VPN Router for Large-Scale Omada SDN Deployments The TP-Link Omada ER8411 is a high-performance enterprise VPN router built for large offices, schools, hotels, and multi-site organisations that demand 10G throughput, multi-WAN redundancy, and carrier-class reliability. Powered by a quad-core 2.2 GHz CPU with dual redundant power supplies, it supports up to 10 WAN ports, two 10G SFP+ ports, hundreds of VPN tunnels, and full integration with the Omada SDN platform for centralised cloud management across your entire network. Key Features 2 × 10G SFP+ ports — 1 × dedicated WAN + 1 × WAN/LAN for high-bandwidth aggregation uplinks Up to 10 WAN ports — SFP+, SFP, and RJ45 WAN ports with multi-WAN load balancing and failover 1 × USB 3.0 port — connect a 4G/3G USB modem for LTE WAN backup Quad-core 2.2 GHz CPU — handles high-throughput routing, VPN processing, and deep packet inspection simultaneously Dual redundant power supplies — carrier-class reliability for mission-critical environments Enterprise VPN — SSL, IPSec, PPTP, L2TP (client/server), and OpenVPN; supports hundreds of simultaneous tunnels One-click auto IPSec VPN — simplifies multi-site VPN configuration and deployment Omada SDN integration — Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring Advanced security — firewall, DoS defence, IP/MAC/URL filtering, IP-MAC Binding, and one-click ALG activation Managed via Omada Controller (hardware/software/cloud) or Omada app Use Cases Large Offices & Enterprises: Handle high-density user traffic with 10G uplinks, multi-WAN load balancing, and centralised Omada SDN management across all network devices. Multi-Site Organisations: One-click IPSec VPN and Omada SDN enable secure, easily managed site-to-site connectivity across multiple Australian locations. Schools & Universities: Robust firewall, URL filtering, and IP-MAC Binding provide the security controls required for educational network environments. Hotels & Hospitality: Multi-WAN load balancing and failover ensure guest and operational networks remain online even if a primary ISP connection fails. Work-From-Home & Remote Access: SSL and OpenVPN support allow remote staff to securely connect to the corporate network from any location. ISP & Data Centre Edge: Dual redundant power supplies and carrier-class performance make the ER8411 suitable for demanding edge routing applications. Specifications Specification Detail Model ER8411 CPU Quad-core 2.2 GHz 10G SFP+ Ports 2 × (1 × WAN + 1 × WAN/LAN) Max WAN Ports Up to 10 (SFP+, SFP, RJ45) USB Ports 1 × USB 3.0 (4G/3G modem WAN backup) VPN Protocols SSL, IPSec, PPTP, L2TP, OpenVPN (client/server) VPN Tunnels Hundreds of simultaneous IPSec, PPTP, L2TP, SSL & OpenVPN tunnels Multi-WAN Load balancing & failover Security Firewall, DoS defence, IP/MAC/URL filtering, IP-MAC Binding, ALG Power Supply Dual redundant power supplies Management Omada SDN (cloud/hardware/software controller), Omada App, Web UI, CLI ZTP Zero-Touch Provisioning supported Weight 6.24 kg Frequently Asked Questions Does the ER8411 require an Omada Controller to function? No. The ER8411 can operate in standalone mode and be managed via its web UI or CLI without any controller. Omada SDN integration — via hardware controller, software controller, or cloud — is optional and enables centralised management of the entire network including switches and access points from a single interface. How many VPN tunnels does the ER8411 support? The ER8411 supports hundreds of simultaneous VPN tunnels across IPSec, PPTP, L2TP, SSL, and OpenVPN protocols. The exact maximum varies by protocol and configuration — refer to the TP-Link datasheet for specific tunnel capacity figures. Can I use the ER8411 with multiple ISP connections? Yes. The ER8411 supports up to 10 WAN ports (SFP+, SFP, and RJ45) with multi-WAN load balancing and automatic failover. This allows you to distribute traffic across multiple ISP connections and maintain connectivity if one link fails. Does it support 4G LTE backup? Yes. Connect a compatible 4G/3G USB modem to the USB 3.0 port to use mobile broadband as a WAN backup connection. This provides an additional failover option if all wired WAN connections fail. What is Zero-Touch Provisioning (ZTP)? ZTP allows the ER8411 to be automatically discovered and configured by the Omada Controller without any manual on-site setup. This is particularly useful for IT teams deploying routers across multiple sites or remote locations across Australia. Is the ER8411 suitable for a school or university network? Yes. The ER8411’s URL filtering, IP/MAC Binding, firewall, and DoS defence provide the security controls required for educational environments. Combined with Omada SDN, it enables centralised management of the entire campus network — routers, switches, and access points — from a single controller.

Read more less

TP-Link EAP620 HD AX1800 Wi-Fi 6 Dual Band Ceiling Mount Access Point High-Density Wi-Fi 6 for Offices, Schools & Commercial Spaces The TP-Link EAP620 HD is an AX1800 dual-band Wi-Fi 6 ceiling mount access point designed for high-density commercial environments. With 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, OFDMA, MU-MIMO, and 4× increased client capacity over Wi-Fi 5, it handles large numbers of simultaneous connections without congestion. Powered via PoE+ (802.3at) and fully integrated with the Omada SDN platform, it’s purpose-built for Australian offices, schools, hotels, and retail deployments requiring centralised management and seamless roaming. Key Features AX1800 dual-band Wi-Fi 6 — 1201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz OFDMA & MU-MIMO — 4× increased capacity for simultaneous multi-device connections 1024-QAM & 4× longer OFDM symbol — higher throughput and improved range Seamless roaming — video streams and voice calls remain uninterrupted as users move between APs Band Steering & Load Balancing — automatically distributes clients across bands and APs for optimal performance Airtime Fairness — prevents slower clients from degrading performance for faster devices Beamforming — focuses signal towards connected clients for improved range and reliability Up to 16 SSIDs (8 per band) — segment networks for staff, guests, IoT, and management traffic Secure guest network with multiple authentication options — SMS, Facebook Wi-Fi, Voucher, and more PoE+ (802.3at) powered — single Ethernet cable for data and power; 12V DC also supported Omada SDN integration — Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring Ceiling or wall mountable — mounting kit included Internal omni antennas — 2.4 GHz: 2×4 dBi; 5 GHz: 2×5 dBi Use Cases Offices & Co-Working Spaces: High-density Wi-Fi 6 handles large numbers of laptops, phones, and IoT devices simultaneously without performance degradation. Schools & Universities: OFDMA and MU-MIMO manage hundreds of student devices per AP; multiple SSIDs segment staff, student, and guest networks. Hotels & Hospitality: Seamless roaming keeps guests connected as they move through the property; voucher and Facebook Wi-Fi authentication simplify guest access. Retail & Shopping Centres: Load balancing and airtime fairness ensure consistent performance across high-traffic areas with mixed device types. Multi-Site Deployments: Omada SDN ZTP and cloud management allow IT teams to deploy and manage multiple sites from a single controller without on-site configuration. Specifications Specification Detail Model EAP620 HD Wi-Fi Standard IEEE 802.11ax/ac/n/g/b/a — AX1800 Dual-Band Wireless Speeds 1201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz Antennas Internal omni — 2.4 GHz: 2×4 dBi; 5 GHz: 2×5 dBi Wi-Fi Technologies OFDMA, MU-MIMO, 1024-QAM, Beamforming, Band Steering, Airtime Fairness SSIDs Up to 16 (8 per band) Ethernet Port 1 × Gigabit RJ45 (PoE+ input) Power Supply 802.3at PoE+ or 12V DC Power Consumption 12 W Mounting Ceiling or wall (mounting kit included) Management Omada SDN (cloud/hardware/software controller), Omada App, Web UI ZTP Zero-Touch Provisioning supported Dimensions (W × D × H) 243 × 243 × 64 mm Weight 1.18 kg Frequently Asked Questions Does the EAP620 HD require an Omada Controller to function? No. The EAP620 HD can operate in standalone mode and be managed via its web UI without any controller. Omada SDN integration — via hardware controller, software controller, or cloud — is optional and enables centralised management of multiple APs, switches, and routers from a single interface. What PoE standard does the EAP620 HD require? The EAP620 HD requires 802.3at PoE+ (not standard 802.3af). Ensure your PoE switch or injector supports 802.3at. Compatible TP-Link PoE switches include the TL-SG105PE, TL-SL1311MP, TL-SG2210MP, and TL-SG3210XHP-M2. How many clients can the EAP620 HD support simultaneously? The EAP620 HD is designed for high-density environments and supports significantly more simultaneous clients than Wi-Fi 5 APs thanks to OFDMA and MU-MIMO. TP-Link rates it at 4× increased capacity compared to Wi-Fi 5. Practical client capacity depends on application type, bandwidth per client, and RF environment. What is seamless roaming and how does it work? Seamless roaming allows a client device to transition between Omada APs on the same network without dropping its connection — even during active video calls or VoIP sessions. The Omada controller coordinates the handoff between APs so the client experiences no interruption as it moves through the coverage area. Can I set up a separate guest Wi-Fi network on the EAP620 HD? Yes. The EAP620 HD supports up to 16 SSIDs (8 per band) and includes a dedicated guest network feature with multiple authentication options including SMS, Facebook Wi-Fi, and voucher-based access — ideal for hotels, cafes, and retail environments.

Read more less

TP-Link EAP610 AX1800 Wi-Fi 6 Ceiling Mount Access Point – Omada SDN | PoE+ Overview The TP-Link EAP610 is a ceiling-mount Wi-Fi 6 (802.11ax) access point delivering combined wireless speeds of up to 1,775Mbps — 1,201Mbps on 5GHz and 574Mbps on 2.4GHz. Designed for commercial, hospitality, education, and enterprise environments, it integrates fully with the Omada SDN platform for centralised cloud management, Zero-Touch Provisioning, and multi-site control via the Omada app or web UI. PoE+ powered (802.3at) for clean, cable-free ceiling installation, with seamless roaming, Omada Mesh, and a secure guest network with multiple authentication options. A professional-grade Wi-Fi 6 access point at a competitive price point for Australian installers and IT managers. Key Features Wi-Fi 6 (AX1800) – 802.11ax dual-band; up to 1,201Mbps on 5GHz and 574Mbps on 2.4GHz for faster, more efficient wireless performance in device-dense environments. Omada SDN Integration – Centralised cloud management, Zero-Touch Provisioning, and multi-site control via the Omada app, web UI, or Omada Controller (OC200/OC300/Software). PoE+ Powered (802.3at) – Powered via a single Ethernet cable; also supports 12V DC for flexible installation options. Seamless Roaming – Uninterrupted video streams and voice calls as users move between access points; no manual reconnection required. Omada Mesh – Wireless backhaul between access points for extended coverage and flexible deployment without additional cabling. Secure Guest Network – Multiple authentication options including SMS, Facebook Wi-Fi, and voucher-based access for hospitality and retail environments. OFDMA & MU-MIMO – Wi-Fi 6 technologies that improve efficiency and throughput in high-density device environments. Ceiling & Wall Mountable – Mounting kits included; discreet low-profile design suits commercial interiors. Management VLAN, SNMP, SSH & Syslog – Full enterprise management feature set for IT administrators. LED On/Off Control – Disable LEDs for discreet deployment in hospitality or residential environments. Use Cases Commercial offices and co-working spaces requiring high-density Wi-Fi 6 coverage Hotels, restaurants, and hospitality venues needing guest network authentication Schools, universities, and education facilities with many concurrent devices Retail environments requiring seamless roaming across multiple access points Healthcare facilities and aged care with strict network segmentation requirements Multi-site business networks managed centrally via Omada cloud Warehouse and industrial environments using Omada Mesh for flexible coverage Technical Specifications Specification Details Model EAP610 Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/g/b/a) 5GHz Speed Up to 1,201Mbps 2.4GHz Speed Up to 574Mbps Ethernet Port 1 × Gigabit RJ45 (IEEE 802.3at PoE+) Power Supply 802.3at PoE+ or 12V / 1A DC Power Consumption (PoE) 12.8W Power Consumption (DC) 10.8W Antennas Internal Omni: 2.4GHz 2×4dBi, 5GHz 2×5dBi Mounting Ceiling / Wall (Kits Included) Dimensions (W × D × H) 243 × 243 × 64mm Omada SDN Yes (OC200, OC300, Software Controller, Cloud) Seamless Roaming Yes Omada Mesh Yes Guest Network Auth SMS, Facebook Wi-Fi, Voucher & More Management HTTP/HTTPS, SSH, SNMP v1/v2c/v3, Syslog, Omada App Management VLAN Yes L3 Management Yes Multi-Site Management Yes LED Control On/Off Controllable Frequently Asked Questions Do I need an Omada controller to use the EAP610? No. The EAP610 can be managed as a standalone access point via its web interface without any controller. An Omada controller (OC200, OC300, or Software Controller) is required only if you want centralised multi-AP management, Zero-Touch Provisioning, seamless roaming, or cloud access via the Omada app. What PoE standard does the EAP610 require? The EAP610 requires 802.3at PoE+ (up to 30W per port). It will not power on reliably from a standard 802.3af (15.4W) PoE switch. Ensure your PoE switch or injector supports 802.3at before installation. It also supports 12V DC power as an alternative. What is Omada Mesh and when should I use it? Omada Mesh allows EAP610 units to connect to each other wirelessly, extending Wi-Fi coverage without running additional Ethernet cables to every access point. This is useful for areas where cabling is difficult or cost-prohibitive. Note that wireless backhaul reduces available bandwidth compared to a wired Ethernet backhaul connection. Does the EAP610 support seamless roaming? Yes. When managed by an Omada controller, the EAP610 supports seamless roaming — devices automatically transition between access points without dropping video streams or voice calls. This requires multiple EAP610 (or compatible Omada EAP) units and an Omada controller. What guest network authentication options are available? The EAP610 supports multiple guest network authentication methods including SMS verification, Facebook Wi-Fi, and voucher-based access — making it well-suited for hotels, cafes, restaurants, and retail environments where controlled guest access is required. Is the EAP610 suitable for outdoor installation? No. The EAP610 is an indoor ceiling-mount access point with no IP weatherproof rating. For outdoor Wi-Fi coverage, TP-Link’s Omada outdoor EAP range (e.g. EAP225-Outdoor, EAP610-Outdoor) should be used instead. Installer Note: The EAP610 requires 802.3at PoE+ — confirm your switch or injector supports this standard before installation. For multi-AP deployments with seamless roaming, an Omada controller (OC200, OC300, or Software Controller) is required. Standalone mode does not support seamless roaming or centralised management.

Read more less