D-Link

Explore D-Link networking and security equipment at CCTV Guru. Browse the available products below and use our buying guide to choose the right hardware for your network or camera system.

Start with the job you need to do: connect more wired devices, supply PoE power, extend Wi-Fi coverage or build a camera recording system. Features vary by model, so check the individual product’s specifications, included items and warranty before buying.

D-Link buying guide: choose the right equipment

Ethernet switches: data speed and PoE are different

A switch adds wired network connections. Multi-gigabit models can support faster local transfers when the connected devices and cabling support the same speed. They do not increase your internet plan’s speed. A port used to connect to your router also uses one of the switch’s available ports.

PoE is model-specific. A non-PoE switch carries data but cannot power a camera or access point. If you need PoE, check the required standard, the power available per port and the switch’s total power budget. For example, the DMS-105 and DMS-108 are data-only switches.

Wi-Fi access points: extend an existing network

An access point provides Wi-Fi for an existing network. Check its Ethernet uplink, supported power method, mounting requirements and management options. It does not replace your internet service. Advertised wireless link rates are theoretical; actual performance depends on your devices, network design and surroundings.

Cameras and CCTV kits: plan the complete system

Compare camera resolution, lens coverage, night lighting, recorder compatibility and storage needs. An NVR kit’s channel count is the number of cameras its recorder supports, not necessarily the number supplied. Check the exact camera quantity, included hard drive and any required cabling or installation accessories.

See our dedicated D-Link CCTV kits collection for published recorder-and-camera bundles. A DIY Wi-Fi camera-and-sensor kit is a different type of system.

Frequently asked questions

Do all D-Link switches provide PoE?

No. Choose a model explicitly rated for the PoE standard and power budget your devices require.

Will a 2.5GbE switch make every device faster?

No. Each link is limited by the capabilities of its connected device and cabling. Internet performance also depends on your router and service plan.

Are Ethernet cables and power equipment included?

Package contents vary. Check the individual listing for supplied adapters, mounting hardware and separately required cables, injectors or other equipment.

Does every D-Link product have the same warranty?

No. Warranty terms differ by model and product category. Refer to the exact listing and linked Australian manufacturer terms.

Need help matching equipment? Contact CCTV Guru with your model numbers, device count and installation requirements.

2 products

  • D-Link DMS-108 8-Port 2.5GbE Multi-Gigabit Desktop Switch

    D-Link D-Link DMS-108 8-Port 2.5GbE Multi-Gigabit Desktop Switch

    D-Link · 2.5 Gigabit Ethernet · UnmanagedMove beyond Gigabit on your local network The D-Link DMS-108 adds 8 wired 2.5GbE ports for compatible computers, NAS devices, routers and other Ethernet equipment. It is a straightforward way to connect more multi-gigabit devices without managing a switch controller. Key features 8 × 2.5GbE ports Connect compatible multi-gigabit devices using RJ45 Ethernet cabling. Plug-and-play networking Automatic link negotiation matches the supported speed of each connected device. Fanless metal housing No cooling fan, making it suitable for a desk or quiet workspace. External power adapter included The adapter powers the switch. Its Ethernet ports do not supply PoE power. Where it makes a difference Use it to connect a compatible NAS and workstation, expand a router’s wired connections or build a small multi-gigabit network. To benefit from 2.5GbE transfers, the devices at both ends and the complete connection path need to support the required speed. Plan your port count before buying: a port used to connect back to your router is still one of the available 8 ports. This switch does not provide Wi-Fi or replace a router. Power and cabling Connect the included power adapter to mains power and use suitable Ethernet patch cables for your devices. Cables are separate. This is a data-only switch: use a suitable injector or a PoE-capable switch if you need to power cameras or wireless access points through Ethernet. Technical specifications Model DMS-108 RJ45 ports 8 × 2.5 Gigabit Ethernet Management Unmanaged / plug and play PoE power output None Switching capacity 40Gbps Cooling / housing Fanless / metal Power source External adapter Dimensions 145 × 82 × 28mm Australian warranty 1-year limited warranty What’s in the box The DMS-108 switch, external power adapter and quick start guide. Ethernet cables are sold separately. Official resources and downloads Official datasheet (PDF)Quick start guide (PDF)D-Link Australia support Frequently asked questions Does this switch supply PoE power? No. The Ethernet ports carry data only. A PoE camera or access point needs a separate suitable power source, such as an appropriate PoE injector or PoE switch. Will all my devices run at 2.5Gbps? Only links with compatible 2.5GbE devices and suitable cabling can negotiate that speed. A 1GbE device continues to work at its supported speed; the switch does not upgrade that device’s network adapter. Does it make my internet connection faster? It can remove a 1Gbps bottleneck between compatible local devices. Your internet speed still depends on your service plan, router, connected devices and the rest of the network. Does it need a controller or software licence? No. This is an unmanaged plug-and-play Ethernet switch. There is no switch configuration interface or controller requirement. What is included? The DMS-108 switch, external power adapter and quick start guide. Ethernet cables are sold separately. What is the warranty? D-Link Australia lists a one-year limited warranty for this model. Contact CCTV Guru if you need warranty assistance.

    $176.00

  • D-Link DMS-105 5-Port 2.5GbE Multi-Gigabit Desktop Switch

    D-Link D-Link DMS-105 5-Port 2.5GbE Multi-Gigabit Desktop Switch

    D-Link · 2.5 Gigabit Ethernet · UnmanagedMove beyond Gigabit on your local network The D-Link DMS-105 adds 5 wired 2.5GbE ports for compatible computers, NAS devices, routers and other Ethernet equipment. It is a straightforward way to connect more multi-gigabit devices without managing a switch controller. Key features 5 × 2.5GbE ports Connect compatible multi-gigabit devices using RJ45 Ethernet cabling. Plug-and-play networking Automatic link negotiation matches the supported speed of each connected device. Fanless metal housing No cooling fan, making it suitable for a desk or quiet workspace. External power adapter included The adapter powers the switch. Its Ethernet ports do not supply PoE power. Where it makes a difference Use it to connect a compatible NAS and workstation, expand a router’s wired connections or build a small multi-gigabit network. To benefit from 2.5GbE transfers, the devices at both ends and the complete connection path need to support the required speed. Plan your port count before buying: a port used to connect back to your router is still one of the available 5 ports. This switch does not provide Wi-Fi or replace a router. Power and cabling Connect the included power adapter to mains power and use suitable Ethernet patch cables for your devices. Cables are separate. This is a data-only switch: use a suitable injector or a PoE-capable switch if you need to power cameras or wireless access points through Ethernet. Technical specifications Model DMS-105 RJ45 ports 5 × 2.5 Gigabit Ethernet Management Unmanaged / plug and play PoE power output None Switching capacity 25Gbps Cooling / housing Fanless / metal Power source External adapter Dimensions 100 × 82 × 28mm Australian warranty 1-year limited warranty What’s in the box The DMS-105 switch, external power adapter and quick start guide. Ethernet cables are sold separately. Official resources and downloads Official datasheet (PDF)Quick start guide (PDF)D-Link Australia support Frequently asked questions Does this switch supply PoE power? No. The Ethernet ports carry data only. A PoE camera or access point needs a separate suitable power source, such as an appropriate PoE injector or PoE switch. Will all my devices run at 2.5Gbps? Only links with compatible 2.5GbE devices and suitable cabling can negotiate that speed. A 1GbE device continues to work at its supported speed; the switch does not upgrade that device’s network adapter. Does it make my internet connection faster? It can remove a 1Gbps bottleneck between compatible local devices. Your internet speed still depends on your service plan, router, connected devices and the rest of the network. Does it need a controller or software licence? No. This is an unmanaged plug-and-play Ethernet switch. There is no switch configuration interface or controller requirement. What is included? The DMS-105 switch, external power adapter and quick start guide. Ethernet cables are sold separately. What is the warranty? D-Link Australia lists a one-year limited warranty for this model. Contact CCTV Guru if you need warranty assistance.

    $125.00

The Best Security Brands