Ubiquiti UniFi Access Reader G2 Professional, 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock This is a 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock. Empower employees with a wide variety of unlock options suitable for any weather conditions. Features: Unlock using an NFC card or UniFi Identity mobile app Doorbell to unlock, triggering the intercom with a video of a visitor Video works at ADA-compliant mounting height PIN unlocking on the screen Connects to UniFi Access Hub using PoE IP55 rain resistance (-10 to 40° C) Technical Specifications Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Weight 136 g (4.8 oz) Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) GbE RJ45 port Connectivity BLE 4.2NFC Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensor Proximity sensor Camera 4000 x 3000, 12 MP, 30 FPS View angle H: 96.67°, V: 123.15°, D: 153.11° Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/WFlash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire Operating environment Outdoor use Ambient operating temperature Device: -30 to 45° C (-22 to 113° F)Display:* -10 to 45° C (14 to 113° F)*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2-Pro/UA-G2-Pro-Black, V02 LED System Steady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and later Downloads Installation Guide

Read more less

The Access Hub is a sophisticated, single-door entry mechanism that also manages connected Access Readers.The UniFi Access Hub comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access application. Easily manage users, visitors, schedules, and access policies with the with the intuitive browser-based interface.Features: Powered by 802.3bt (PoE++) switch Three 802.3af PoE ports for UniFi readers and G3 Flex surveillance camera 12V powered and dry relays compatible with most locks Four inputs for motion sensors, request-to-exit devices and door position switch Managed with UniFi Access Application in UDM-Pro DIN-rail mounting

Read more less

UniFi® Access Card is a highly secure NFC smart card compatible with the UniFi Access system.The card data is encrypted with both AES-128 and with UniFi Access proprietary security mechanism. These additional security measures protect the card number from leaks and duplication.Features:Secure NFC card for use with UniFi Access solutionEach pack includes 20 UA-CardsUA-CardDimensions 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.033")Weight 5 g (0.18 oz)Format ISO 7810 ID-1NFCFrequency 13.56 MHzTechnology ISO/IEC 14443 Type AMIFARE DESFire EV2UniFi Access Proprietary SecurityProtocol

Read more less