Axis Network Intercoms

NDAA Compliant • Network I/O Relay ModuleAXIS A9188 (0820-001) — Australian Stock & 5-Year Warranty The AXIS A9188 Network I/O Relay Module is an intelligent, network-connected I/O expander that adds 8 configurable I/Os with supervised inputs and 8 Form C relays to any Axis system. Built on an open platform with the VAPIX open API, it integrates tightly with the AXIS A1001 Network Door Controller and third-party facility systems such as elevator floor management and HVAC. It also supplies 12 V DC and 24 V DC power out to connected field devices, so it can extend the functionality of virtually any Axis product that needs extra inputs, outputs or relays. DIGITAL I/O 8x Configurable RELAYS 8x Form C POWER INPUT PoE+ or 8–28 V DC OPEN API VAPIX & ACAP Supervised inputs for genuine line security Unlike a basic relay board, every one of the eight I/Os on the A9188 can be set as a standard input, a supervised input with analog read-out, or an output. Supervised inputs monitor the 0–12 V range across four states, so the module can tell the difference between a normal loop, an alarm, a cut cable and a shorted cable. Combined with a dedicated tamper input and a 30,000-event FIFO log, that makes the A9188 suitable for access control and alarm interfaces where line integrity actually matters. Elevator & floor management Eight Form C relays rated to 1 A at 48 V DC map neatly onto elevator floor buttons, letting an AXIS A1001 door controller restrict which levels a credential can reach. Powers your field devices Dual 12 V DC and 24 V DC outputs feed locks, sensors and sounders directly — up to 12 W shared when running on PoE Class 4 or DC input, or 3.6 W on PoE Class 3. Open integration VAPIX open API, AXIS Video Hosting System with One-Click Connection, and AXIS Camera Application Platform support for installing third-party edge applications. Hardened networking HTTPS encryption, IEEE 802.1X network access control, IP address filtering and digest authentication, plus SNMPv1/v2c/v3 and IPv6 for enterprise deployment. Technical Specifications I/O INTERFACE Digital I/O 8x I/O, configurable as input, supervised input with analog read-out, or output Digital input range 0 to max 40 V DC; supervision between 0–12 V (4 states) Digital output 0 to max 40 V DC, open drain, max 100 mA Relays 8x Form C relays, NO/NC contacts, max 1 A, 48 V DC (max 30 V DC outdoors) Tamper Dedicated tamper input for external tamper contact(s) NETWORK & SECURITY Network port 1x RJ45 10BASE-T/100BASE-TX Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X, digest authentication Protocols IPv4, IPv6, HTTP, HTTPS, TLS, QoS Layer 3 DiffServ, FTP, SFTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMPv1/v2/v3, RTCP, ICMP, DHCP, ARP, SOCKS SYSTEM INTEGRATION API Open API for software integration, including VAPIX Hosting AXIS Video Hosting System (AVHS) with One-Click Connection Edge applications Support for AXIS Camera Application Platform (ACAP) Event history 30,000 events, First In First Out (FIFO) Event actions Notification via email, HTTP, HTTPS and TCP; external output port; status LED Event triggers Tamper detection, network lost, configuration, event logger, hardware, input signal, schedule, system, time, supervised inputs (4 states), relays and outputs, heartbeat lost POWER Power in 8–28 V DC, max 26 W, or PoE IEEE 802.3af Type 1 Class 3 / IEEE 802.3at Type 2 Class 4 Power out 12 V DC and 24 V DC Max power out Shared between 12 V and 24 V outputs — PoE Class 3: 3.6 W; PoE Class 4 or DC input: 12 W Connectors Terminal blocks: 1x DC IN, 2x DC out, 8x inputs/outputs, 8x relays, 1x tamper, 1x RS485 (for future use) Cable size CSA: AWG 28–16; CUL/UL: AWG 30–14 GENERAL & ENVIRONMENTAL Memory 256 MB RAM, 256 MB Flash Operating conditions -30 °C to 55 °C (-22 °F to 131 °F) Humidity 20–85% RH (non-condensing) Dimensions 43 x 186 x 120 mm (1.7 x 7.3 x 4.7 in) Weight 500 g (1.1 lb) Sustainability PVC free Approvals EN 55022 Class B, EN 50130-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, C-tick AS/NZS CISPR22 Class B, VCCI Class B, IEC/EN/UL 62368-1, EN 50581 Included accessories Connector kit, jumper kit, TORX Key TR20, installation guide Optional accessories AXIS T8133 Midspan 30 W, AXIS T8129 PoE Extender, AXIS T8007 PS24 power supply, AXIS T98A15-VE Surveillance Cabinet Part number 0820-001 Warranty 5-year Axis warranty Downloads Axis A9188 DatasheetAxis A9188 Installation GuideAxis A9188 User Manual Frequently Asked Questions How many inputs, outputs and relays does the A9188 have?Eight I/O terminals, each individually configurable as a digital input, a supervised input with analog read-out, or a digital output — plus eight separate Form C relays with NO/NC contacts. What is a supervised input and why does it matter?A supervised input monitors the resistance of the alarm loop between 0 and 12 V across four states. That lets the module report a cut or shorted cable as a fault rather than silently failing, which is essential for security-grade alarm and door contact wiring. How is the A9188 powered?Either by Power over Ethernet — IEEE 802.3af Type 1 Class 3 or IEEE 802.3at Type 2 Class 4 (PoE+) — or from an 8–28 V DC supply drawing up to 26 W. Can it power connected devices?Yes. It provides both 12 V DC and 24 V DC outputs. The maximum power out is shared between the two rails: 3.6 W on PoE Class 3, or 12 W on PoE Class 4 or DC input. What can the relays switch?Each of the eight Form C relays is rated to a maximum of 1 A at 48 V DC. In outdoor installations using the AXIS T98A15-VE cabinet the maximum allowed voltage is 30 V DC. Does it work with the AXIS A1001 Door Controller?Yes — the A9188 is designed for a high level of integration with the AXIS A1001 Network Door Controller, and is commonly used for elevator floor management. It also works with AXIS Camera Station, AXIS Video Hosting System and third-party partner software. Can I integrate it with my own software?Yes. Axis publishes an open API including VAPIX, and the module supports the AXIS Camera Application Platform so third-party edge applications can be installed directly on the device. Can the A9188 be installed outdoors?Not on its own. The module is rated for -30 °C to 55 °C, but outdoor installation requires the AXIS T98A15-VE Surveillance Cabinet, which also caps the maximum relay voltage at 30 V DC. What is in the box?The A9188 ships with a connector kit, a jumper kit, a TORX TR20 key and an installation guide. Optional extras include the AXIS T8133 Midspan 30 W, AXIS T8129 PoE Extender and AXIS T8007 PS24 power supply. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

AXIS C-SERIES · NDAA & TAA COMPLIANT Intelligent, Long-Range Public Address Messaging The AXIS C1610-VE is a rugged, network-integrated sound projector engineered to deliver crystal-clear voice messages across expansive commercial and public areas. Ideal for harsh outdoor environments, industrial perimeters, and high-density urban zones, this standalone IP speaker acts as a powerful audio deterrent. With a robust minimalist aesthetic and integrated smart capabilities, it seamlessly blends proactive voice intervention with your existing network video surveillance environment. Audio Output 121 dB Max SPL Dispersion Long-Range Direct Intelligence Auto Health Test Protection IP66/IP67 & IK10 Advanced Edge Integration & Acoustic Testing Driven by edge-based software, the AXIS C1610-VE operates as an all-in-one audio management powerhouse without relying on external servers. It comes equipped with pre-loaded AXIS Audio Manager Edge, enabling operators to manage scheduling, zones, and content permissions efficiently. A built-in microphone continuously monitors speaker health by performing automated acoustic tests, guaranteeing the device is fully functional when emergency announcements or security call-outs are critically needed. All-in-One Audio System Eliminate complex cabling and dedicated central amplifiers. The system contains a built-in power amplifier and digital signal processor (DSP) that optimizes clarity out of the box. Connects directly to standard IP networks via a single PoE/PoE+ drop for maximum installation simplicity. Vandal & Weatherproof Engineering Encased in a certified IK10, IP66, IP67, and NEMA 4X rated chassis. The device handles extreme environments ranging from -40 °C to 60 °C, offering long-term reliability against heavy downpours, windborne debris, corrosion, and intentional tampering. Technical Specification Matrix Camera Model AXIS C1610-VE Audio Output 121 dB SPL (Peak at 1m) Power Method Power over Ethernet (PoE) IEEE 802.3af/802.3at Integrated Software AXIS Audio Manager Edge (Pre-installed) Microphone Built-in electret condenser (for auto speaker test & two-way audio) Environmental Ratings IP66, IP67, NEMA 4X, IK10 vandal resistance Operating Temperature -40 °C to 60 °C (-40 °F to 140 °F) Compliance NDAA Compliant, TAA Compliant Technical Datasheet Quick Start Guide Operation Manual Installation Manual Does the system require a central server for audio schedules? No. The unit features built-in AXIS Audio Manager Edge firmware, allowing you to configure zones, manage schedules, handle content, and deploy updates locally directly from a web browser. How does the automatic health test work? The integrated microphone listens for a sub-audible tone emitted by the internal amplifier components. This self-test validates that the amplifier and speaker drivers are operating flawlessly without needing onsite visual or audible checkups. Is this model fully compliant with federal procurement standards? Yes. The speaker is completely NDAA and TAA compliant, making it safe and certified for placement within US government sites, defense applications, and enterprise infrastructures. Can it connect to VoIP systems? Absolutely. It supports Session Initiation Protocol (SIP) for seamless integration with modern Voice over IP (VoIP) telephony systems, allowing live page messages via standard office phone lines. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

Read more less

NDAA Compliant • Vandal-Resistant IP Intercom2N IP Force 01337-001 — 1-Button SIP Door Station with HD Camera, Australian Stock The 2N IP Force is built for the doors nobody else survives. Its cast aluminium body carries an IP69K and IK10 rating, so it shrugs off high-pressure wash-down, driving rain, dust and deliberate attack — which is why it turns up on car parks, prisons, industrial sites, loading docks and transport hubs across Australia. This variant (part number 01337-001) pairs a single backlit call button with the wide-angle HD camera and night vision, so you always see who is at the door. Audio is handled by two microphones and a 10 W speaker that stays intelligible next to traffic and machinery, and the whole unit runs on a single PoE 802.3af cable with standard SIP 2.0 for easy integration into any IP phone system, VMS or access control platform. CAMERA HD 1280 x 960 DURABILITY IP69K • IK10 POWER PoE 802.3af AUDIO 10 W Speaker Introduction of 2N IP Force — The Most Durable IP Intercom Why Installers Choose the 2N IP Force Most door stations are chosen on looks. The IP Force is chosen because the site is hostile. Cast aluminium, security screws, an optional tamper switch and a temperature range that spans -40 °C to +60 °C mean it keeps working through Australian summers, coastal salt and freezer rooms alike — and it does it while streaming ONVIF video into your existing surveillance system. Built for Punishment Robust aluminium casting rated IP69K for high-pressure, high-temperature wash-down and IK10 against impact. Fit it where a plastic intercom would last a week. Wide-Angle HD Camera with Night Vision 1280 x 960 HD sensor with a 124° horizontal by 90° vertical field of view and integrated infrared illumination, so faces are captured day or night, close to the panel or standing back. Heard Over the Noise Two built-in microphones and a 10 W speaker deliver 94 dB at one metre, with full-duplex echo cancellation and adaptive volume control for loud, open environments. Open Standards, No Lock-In SIP 2.0 signalling, ONVIF Profile S video, 802.1x, HTTPS and RTSP mean the IP Force drops into third-party PBX, VMS and access control systems without proprietary middleware. Technical Specifications MODEL & CONFIGURATION Model 2N IP Force — 1 Button, HD Camera Part Number 01337-001 Button Design Transparent button with white backlight and easily removable label Number of Buttons 1 Numeric Keypad Not fitted on this variant (available on keypad models) CAMERA & VIDEO HD Camera Resolution 1280 x 960 Viewing Angle 124° (H), 90° (V) Night Vision Yes Video Codecs H.263, H.263+, H.264, MJPEG AUDIO Microphone 2 built-in microphones Speaker 10 W Sound Pressure (1 kHz at 1 m) 94 dB Audio Codecs G.711, G.729, G.722, L16/16 kHz NETWORK & INTERFACES LAN 10/100BASE-TX with Auto-MDIX Signalling Protocol SIP 2.0 (RFC 3261) Supported Protocols SIP 2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF Passive Switch NC/NO contacts, 30 V Active Switch Output 9 to 13 V DC depending on power supply (PoE: 9 V), max 700 mA Tamper Switch Optional accessory POWER Power Supply 12 V ± 15% / 2 A DC, or PoE PoE IEEE 802.3af (Class 0 — 12.95 W) MECHANICAL & ENVIRONMENTAL Cover Rating IP69K, IK10 Dimensions (W x H x D) 217 x 109 x 83 mm Weight 2 kg Operating Temperature -40 °C to +60 °C Storage Temperature -40 °C to +60 °C Operating Humidity 10–95% (non-condensing) Compliance NDAA Section 889 compliant, TAA compliant Downloads 2N IP Force Datasheet2N IP Force Installation Guide2N IP Intercom Configuration Manual Frequently Asked Questions How many call buttons does 01337-001 have?One. This variant is the 1-button model with the HD camera fitted. 2N also builds the IP Force with 2 or 4 buttons, and with an optional numeric keypad, if you need more destinations. Can I power it over a single network cable?Yes. The IP Force accepts IEEE 802.3af PoE (Class 0, up to 12.95 W), so one Cat-5e or better run carries both data and power. A 12 V DC / 2 A supply is the alternative if you have no PoE switch. Will it work with my existing phone system?It speaks standard SIP 2.0 (RFC 3261), so it registers to virtually any IP PBX, hosted SIP service or 2N answering unit. It can also run peer-to-peer without a server for simple door-to-handset setups. Can it release the door strike or gate?Yes. There is a passive relay output with NC/NO contacts rated to 30 V, plus an active switch output supplying 9 to 13 V DC at up to 700 mA for a lock or gate controller. How tough is it really?The casting is rated IP69K — the highest ingress protection tier, covering high-pressure hot-water wash-down — and IK10 for impact. Security screws and an optional tamper switch are available for exposed installations. Can I view the camera in my VMS?Yes. The IP Force supports ONVIF and RTSP streaming with H.264 and MJPEG, so the door camera can be recorded and viewed alongside your other cameras. Does it see in the dark?Yes. Integrated infrared illumination provides night vision, and the 124° horizontal field of view captures visitors even when they stand off to the side of the panel. Does this model include an RFID card reader?No. 01337-001 is the 1-button HD camera model. If you need card or fob entry, choose one of the “card reader ready” IP Force variants and add the matching reader module. Can it call a mobile phone?Yes. With the 2N Mobile Video cloud service the IP Force can place video calls to smartphones and tablets, so the door can be answered from anywhere. Genuine 2N Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

NDAA Compliant • Touchscreen SIP Reception Phone2N IP Phone D7A 02660-001 — 7-Inch Touchscreen Desk Phone for Reception & Intercom Answering, Australian Stock The 2N IP Phone D7A is the desk phone built for the front counter. Its 7-inch 1024 x 600 capacitive touchscreen shows a live preview from your 2N IP intercom, so the receptionist can see who is at the door and release it with one touch on the display. Underneath it is a serious business phone: up to 16 SIP accounts, 27 one-touch DSS keys, dual-port Gigabit Ethernet, dual-band Wi-Fi and PoE 802.3af power, so a single UTP cable does data and power. Because it runs Android, you can install apps such as Skype or Zoom alongside your telephony — and optional accessories add a 5 MP USB camera for two-way video, up to 60 extra speed dials, or a wall mount. DISPLAY 7" Touchscreen SIP ACCOUNTS Up to 16 POWER PoE 802.3af NETWORK Dual Gigabit + Wi-Fi 2N IP Phone D7A — Smart IP Phone for Office & Residential Buildings The Phone That Answers Your Door Most SIP desk phones treat an intercom call like any other call — audio only, no idea who is standing outside. The D7A is designed around it. Preview, one-button open and monitoring are native intercom features, and the large adjustable-tilt touchscreen makes the door video easy to read from across a reception desk. See the Door, Open the Door Native intercom features — camera preview, one-button door release and monitoring — put the visitor on screen before you decide to let them in. Sixteen Lines, Twenty-Seven Keys Up to 16 SIP accounts plus 27 one-touch DSS keys and 7 dedicated feature keys cover busy reception, concierge and multi-tenant scenarios without a hunt through menus. One Cable, or None PoE 802.3af class 3 over dual-port Gigabit Ethernet means a single UTP run. No convenient cable? Connect over dual-band 802.11a/b/g/n Wi-Fi instead. Android Under the Hood The Android OS lets you install apps such as Skype or Zoom directly on the phone, turning one device into telephony, door entry and video conferencing. Technical Specifications DISPLAY & INDICATORS Screen Type LCD Resolution 7-inch 1024 x 600 capacitive adjustable touch screen Vertical Tilt Angle 48° adjustable LED Call and message waiting indication PHONE & INTERCOM FEATURES Number of SIP Accounts 16 Intercom Features Preview, one-button open, monitoring Call Features Call hold, forward, waiting, transfer, one-touch speed dial, hotline, mute, DND, group listening, emergency call, redial, call return, auto answer, dial plan, voice mail, call park, call pickup Other Features Music on hold, call recording, local phonebook up to 1000 entries, XML/LDAP remote phonebook, call history Feature Keys 27 one-touch DSS keys; 7 feature keys (hold, transfer, message, headset, mute, redial, speakerphone) Other Keys Volume control, mute, headset, hands-free speakerphone key AUDIO & VIDEO Audio Codecs Opus, G.722, G.711A, G.711U, G.729, G.726, G.723.1, iLBC DTMF In-band, out-of-band (RFC 2833) and SIP INFO Video Codecs H.264 High Profile, H.264, VP8 Video Quality 720p (1280 x 720) at 30 fps Field of View 75° ± 5° Optional CAM50 Camera 5 megapixel, privacy shutter, 47° ± 3° vertical tilt INTERFACES & PORTS PoE Power over Ethernet (IEEE 802.3af), class 3 Bluetooth 4.2 — for optional BTH58 Bluetooth handset, generic BT headsets and paired mobiles USB Ports 2 x USB 2.0 (top port for optional CAM50 camera; rear port for USB flash drive or USB headset) RJ9 (4P4C) 2 — one handset port, one headset port Extender Support Up to 3 colour-screen EXP50 extender modules (Axis P/N 01741-001) NETWORK & SECURITY Ethernet Dual-port Gigabit Wi-Fi IEEE 802.11a/b/g/n, 2.4 GHz / 5.0 GHz IP Version IPv4 / IPv6 Signalling Protocol SIP v1 (RFC 2543), v2 (RFC 3261) Call Possibilities Proxy mode and peer-to-peer SIP link mode QoS 802.1p/Q tagging (VLAN), SRTP Encryption TLS 1.3 VPN OpenVPN, IEEE 802.1X, L2TP VPN Configuration Web browser / local phone UI / auto provision (FTP, TFTP, HTTP, HTTPS) POWER & PHYSICAL Power Supply PoE and/or 12 V DC; optional external AC adapter (5 V / 2 A output) Power Consumption 2.5 W – 7.6 W Dimensions (W x D x H) 259.4 x 220 x 215 mm Wall Mountable Optional, with wall mount bracket (Axis P/N 02530-001) Package Contents 2N IP Phone D7A, wired handset with cord, Ethernet cable, desk stand, quick start guide Part Number 02660-001 Compliance NDAA Section 889 compliant, TAA compliant Downloads 2N IP Phone D7A Datasheet2N IP Phone D7A Installation Guide2N IP Phone D7A User Manual Frequently Asked Questions Can I see the door camera on this phone?Yes. Camera preview is a native intercom feature. When a 2N IP intercom calls the D7A, the visitor appears on the 7-inch screen and you can release the door with one touch. How many SIP accounts does it support?Up to 16 SIP accounts, registered to a proxy or used in peer-to-peer SIP link mode for server-free installations. Does it need a power adapter?No, not usually. It draws power over Ethernet using IEEE 802.3af class 3, so one UTP cable is enough. An optional external AC adapter (5 V / 2 A) is available if PoE is not on hand. Can it connect over Wi-Fi?Yes. Built-in dual-band 802.11a/b/g/n Wi-Fi (2.4 GHz and 5 GHz) is an alternative to the dual-port Gigabit Ethernet if you cannot run a cable to the desk. Can it do two-way video calls?Yes, with the optional CAM50 USB camera. It is a 5 megapixel unit with a privacy shutter that plugs into the USB port on top of the phone; the phone handles H.264 and VP8 at 720p. Can I add more speed dial keys?Yes. The D7A supports up to three colour-screen EXP50 extender modules, adding up to 60 additional one-touch speed dials for busy reception or concierge desks. Can I mount it on a wall?Yes, using the optional wall mount bracket. Out of the box it ships with a desk stand, and the screen tilts through 48° for comfortable viewing at either height. Will it work with a headset?Yes. There is a dedicated RJ9 headset port alongside the handset port, a rear USB 2.0 port for USB headsets, and Bluetooth 4.2 for wireless headsets or the optional BTH58 handset. Is it secure enough for a corporate network?It supports TLS 1.3, SRTP, 802.1p/Q VLAN tagging, IEEE 802.1X, OpenVPN and L2TP VPN, and can be auto-provisioned over HTTPS. 3-Year Axis Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

NDAA Compliant • 5MP Video Intercom with Deep LearningAXIS I8116-E (02408-001) — Australian Stock & 5-Year Warranty The AXIS I8116-E Network Video Intercom is a compact, all-in-one entry device that combines a 5 MP camera, two-way communication and remote door release over a single PoE cable. At just 48 mm wide it fits neatly on walls, doorframes and mullions, while deep learning on the edge with AXIS Object Analytics detects and classifies people and vehicles at your entrance. Open standards — ONVIF and SIP — let it integrate with existing VMS, VoIP and access-control systems for true door-to-desk communication. Camera 5 MP with WDR Audio Two-Way + Noise Cancel Integration ONVIF & SIP Power Single PoE Cable Secure entry, smart analytics The I8116-E pairs reliable video and clear two-way audio with edge analytics, so your team can see, hear and grant access from anywhere on the network. Switchable I/O and a built-in relay let it drive a lock or door strike directly, making it a complete entry solution in one weatherproof unit. 5 MP Video with WDR High-resolution imaging with Wide Dynamic Range keeps faces clear even against strong backlight at the door. Two-Way Communication Full-duplex audio with efficient noise cancellation delivers natural conversations in noisy, real-world environments. Deep Learning at the Edge AXIS Object Analytics detects and classifies humans and vehicles on-device to reduce false alarms. Remote Entry & Access Switchable I/O and a relay let you control locks and integrate with access-control systems over the same PoE link. Technical Specifications Camera & Image Resolution 5 MP Image enhancement Wide Dynamic Range (WDR) Video compression H.264, H.265, Motion JPEG Audio & Intercom Communication Two-way (full duplex) Audio processing Efficient noise cancellation Call protocol SIP / VoIP Network & Integration Standards ONVIF, SIP Analytics AXIS Object Analytics (deep learning, edge) I/O Configurable I/O, switchable to reader port Relay Built-in relay (NO/NC) for lock/door control Power Power Power over Ethernet (PoE), single cable Connector RJ45 Ethernet Environmental & Physical Protection IP65, NEMA 4X, IK08 (IK10 with AXIS TI8605 Protection Cover) Operating temperature -30 °C to 60 °C Width 48 mm Compliance NDAA (Section 889) & TAA compliant Downloads AXIS I8116-E DatasheetAxis Intercom Installation GuideAxis Intercom User Manual Frequently Asked Questions What resolution is the I8116-E camera?It captures 5 MP video with Wide Dynamic Range for clear images even in challenging backlit doorway scenes. Does it support two-way audio?Yes. It offers two-way communication with efficient noise cancellation for clear conversations in noisy environments. Can it control a door lock?Yes. A built-in relay and configurable I/O let you control locks and door strikes, and the I/O can be switched to a reader port for access-control integration. How is it powered?A single PoE cable supplies power and data, simplifying installation with no separate power supply at the door. Does it work with SIP / VoIP phone systems?Yes. The intercom supports SIP, so calls can be routed to VoIP handsets, softphones or compatible answering apps. Is it ONVIF compatible?Yes. ONVIF support lets it integrate with a wide range of third-party VMS and recording platforms. What analytics are built in?AXIS Object Analytics runs on the edge using deep learning to detect and classify humans and vehicles, reducing false alarms. Is it suitable for outdoor use?Yes. It is IP65 and NEMA 4X rated with an operating range of -30 °C to 60 °C, and reaches IK10 impact resistance with the AXIS TI8605 cover. Is the I8116-E NDAA compliant?Yes. As an Axis Communications device it is NDAA Section 889 and TAA compliant, suitable for government and enterprise projects. 5-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less