Genuine Australian outlets
Four AS/NZS 3112 sockets let you plug in local gear directly — no IEC leads, travel adaptors or double-adaptors cluttering your setup.
Automatic Voltage Regulation
AVR corrects sustained low and high mains voltage back to a usable range without switching to battery, preserving battery life and riding through brownouts.
Cold-start capability
Power up connected equipment from the battery even when mains power is completely unavailable — useful during extended outages.
Clear LED status display
At-a-glance indicators show on-line and on-battery states plus fault conditions, so you always know how the unit and your mains supply are behaving.
Runtimes are measured with new, fully charged batteries at a balanced resistive load. Sizing to roughly half the rated wattage gives you a far more useful runtime buffer.
Does it have Australian power outlets?
Yes. The BX1600MI-AZ has 4 Australian AS/NZS 3112 outlets, so local plugs connect directly without IEC leads or adaptors.
How long will it run my equipment?
Around 1 minute at the full 900W load and about 6.5 minutes at 450W. Light loads such as a modem and router can run for up to several hours.
Is the output a pure sine wave?
No. This model produces a stepped approximation to a sine wave. If your equipment uses an active PFC power supply, choose a pure sine wave model such as the APC Smart-UPS range instead.
Does it connect to a computer for automatic shutdown?
No. The BX1600MI-AZ has no USB or serial data port. If you need PowerChute software and automated shutdown, step up to an APC Smart-UPS model.
What is Automatic Voltage Regulation (AVR)?
AVR corrects sustained low or high mains voltage back to a safe range without discharging the battery, which protects your gear and extends battery life.
What is the replacement battery?
It uses the APC RBC176 replacement battery cartridge, with a typical service life of 3 to 5 years.
Can I mount it in a rack?
No. This is a tower-form UPS and is not rack-mountable. For rack installations, consider a 2U rackmount model such as the APC Smart-UPS C.
How long does it take to charge?
Typical recharge time is 8 hours. Charge it fully before depending on it for backup runtime.
