Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch

Description

UniFi Switching — NDAA Compliant

Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch

The Ubiquiti UniFi Switch Flex (USW-Flex) is a compact, weatherproof 5-port Layer 2 managed Gigabit switch built to extend your network and PoE devices to places a normal switch can't go. It draws all its power over a single PoE++ uplink, then redistributes up to 46 W of PoE+ across four ports — perfect for powering UniFi cameras, access points, and IoT devices outdoors or in tight spaces. Fully managed through the UniFi Network application, it's ideal for homes, offices, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping.

Ports
5 × GbE
PoE Budget
46 W PoE+
Build
Outdoor-Ready
Management
UniFi Network

Why Choose the UniFi Switch Flex?

Powered Entirely Over PoE++

No power brick at the switch — the USW-Flex is powered by a single PoE++ uplink or a 60 W PoE adapter, so you can place it almost anywhere a network cable reaches.

46 W of PoE+ Output

When fed by a PoE++ source, four GbE ports deliver up to 46 W total (25 W max per port), enough to run UniFi cameras, access points, and other PoE devices downstream.

Outdoor-Ready Design

A rugged polycarbonate enclosure operates from −40°C to 65°C and 5–95% humidity, making it suitable for sheltered outdoor and demanding Australian environments.

Full Layer 2 Management

VLANs, port isolation, port mirroring, flow control, jumbo frames, and egress rate limiting — all configured through the UniFi Network application with no per-device licensing.

Flexible Mounting

Compact 122.5 × 107.1 mm form factor mounts on a desk, wall, or pole, letting you bring switching and PoE exactly where it's needed.

NDAA Compliant

Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement.

Technical Specifications

Model USW-Flex
Networking Interface (5) GbE RJ45 ports (1G / 100M / 10M)
PoE Ports 4 × PoE+ output • 1 × PoE++ input
Total Available PoE 46 W (PoE++ / 60 W adapter input) • 20 W (PoE+ input) • 8 W (PoE input)
Max. PoE per Port 25 W (PoE+)
Switching Capacity 10 Gbps
Non-Blocking Throughput 5 Gbps
Forwarding Rate 7 Mpps
Supported VLANs 1,000
MAC Address Table 2,000
Layer 2 Features Egress rate limit, flow control, port isolation, port mirroring, jumbo frames
Power Method PoE++ • 50–57V DC supported range
Max. Power Consumption 5 W (excluding PoE output)
Management UniFi Network application (Version 5.10.3 and later)
Enclosure Polycarbonate • outdoor-ready
Mounting Compact desktop, wall, pole
ESD Protection Air / contact: ±16 kV
Operating Temperature −40°C to 55°C (46 W PoE) • −40°C to 65°C (25 W PoE)
Operating Humidity 5 to 95% non-condensing
Dimensions / Weight 122.5 × 107.1 × 28 mm • 230 g
Certifications CE, FCC, IC, Anatel
Compliance NDAA compliant

Downloads & Resources

What's in the Box

UniFi Switch Flex (USW-Flex)

The 5-port outdoor-ready managed PoE++ switch.

Mounting Hardware

Brackets and screws for desk, wall, or pole installation.

Documentation

Quick-start guide and installation instructions.

Not Included

A PoE++ switch or 60 W PoE adapter is required to power the unit and unlock the full 46 W PoE budget (sold separately).

Best For

Outdoor Camera Clusters

Power and connect several UniFi cameras from one PoE++ uplink at the far end of a run.

Remote Access Points

Extend wired backhaul and PoE to APs in sheds, gates, and outbuildings.

Desk & Edge Expansion

Add managed ports to a desk or AV rack without running a new power circuit.

IoT & Smart Sites

Segment and power IoT devices with VLANs and port isolation on the network edge.

  • Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application 5.10.3 or later.
  • Power the switch with a PoE++ source or 60 W PoE adapter to access the full 46 W downstream PoE budget.
  • Lower-power inputs still work: PoE+ input gives 20 W and standard PoE input gives 8 W of downstream PoE.
  • Mounts to desk, wall, or pole; suited to sheltered outdoor placements within its rated temperature range.

Frequently Asked Questions

How is the USW-Flex powered?

Entirely over its PoE input port. Use a PoE++ switch or a 60 W PoE adapter to get the full 46 W of downstream PoE; PoE+ and standard PoE inputs work too, with smaller budgets.

How much PoE can it deliver to my devices?

Up to 46 W total across four PoE+ ports (25 W max per port) when fed by a PoE++ source — enough for UniFi cameras, access points, and IoT devices.

Can it be used outdoors in Australia?

Yes. It's outdoor-ready with a polycarbonate enclosure rated from −40°C to 65°C and 5–95% humidity, suiting sheltered outdoor and harsh Australian conditions.

Do I need a controller to manage it?

Yes. The USW-Flex is managed through the UniFi Network application running on a UniFi Cloud Gateway, Dream Machine, or Cloud Key — there are no per-device licence fees.

Is the USW-Flex NDAA compliant?

Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites.

Fast AU Shipping
Genuine Ubiquiti Stock
Expert AU Support

Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch

Product form

SKU: USW-Flex

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch The Ubiquiti... Read more

$200.10  $199.99 Incl. GST

    • PayPal
    • Apple Pay
    • Visa
    • Mastercard
    • American Express
    • Zip
    • Afterpay

    • Warranty: 12 months
    • 30 day Money Back Guarantee
    • Australian Stocks & Express Delivery
    • Back-to-base Warranty & Tech Support
    • FREE Shipping over $180

    Description

    UniFi Switching — NDAA Compliant

    Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch

    The Ubiquiti UniFi Switch Flex (USW-Flex) is a compact, weatherproof 5-port Layer 2 managed Gigabit switch built to extend your network and PoE devices to places a normal switch can't go. It draws all its power over a single PoE++ uplink, then redistributes up to 46 W of PoE+ across four ports — perfect for powering UniFi cameras, access points, and IoT devices outdoors or in tight spaces. Fully managed through the UniFi Network application, it's ideal for homes, offices, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping.

    Ports
    5 × GbE
    PoE Budget
    46 W PoE+
    Build
    Outdoor-Ready
    Management
    UniFi Network

    Why Choose the UniFi Switch Flex?

    Powered Entirely Over PoE++

    No power brick at the switch — the USW-Flex is powered by a single PoE++ uplink or a 60 W PoE adapter, so you can place it almost anywhere a network cable reaches.

    46 W of PoE+ Output

    When fed by a PoE++ source, four GbE ports deliver up to 46 W total (25 W max per port), enough to run UniFi cameras, access points, and other PoE devices downstream.

    Outdoor-Ready Design

    A rugged polycarbonate enclosure operates from −40°C to 65°C and 5–95% humidity, making it suitable for sheltered outdoor and demanding Australian environments.

    Full Layer 2 Management

    VLANs, port isolation, port mirroring, flow control, jumbo frames, and egress rate limiting — all configured through the UniFi Network application with no per-device licensing.

    Flexible Mounting

    Compact 122.5 × 107.1 mm form factor mounts on a desk, wall, or pole, letting you bring switching and PoE exactly where it's needed.

    NDAA Compliant

    Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement.

    Technical Specifications

    Model USW-Flex
    Networking Interface (5) GbE RJ45 ports (1G / 100M / 10M)
    PoE Ports 4 × PoE+ output • 1 × PoE++ input
    Total Available PoE 46 W (PoE++ / 60 W adapter input) • 20 W (PoE+ input) • 8 W (PoE input)
    Max. PoE per Port 25 W (PoE+)
    Switching Capacity 10 Gbps
    Non-Blocking Throughput 5 Gbps
    Forwarding Rate 7 Mpps
    Supported VLANs 1,000
    MAC Address Table 2,000
    Layer 2 Features Egress rate limit, flow control, port isolation, port mirroring, jumbo frames
    Power Method PoE++ • 50–57V DC supported range
    Max. Power Consumption 5 W (excluding PoE output)
    Management UniFi Network application (Version 5.10.3 and later)
    Enclosure Polycarbonate • outdoor-ready
    Mounting Compact desktop, wall, pole
    ESD Protection Air / contact: ±16 kV
    Operating Temperature −40°C to 55°C (46 W PoE) • −40°C to 65°C (25 W PoE)
    Operating Humidity 5 to 95% non-condensing
    Dimensions / Weight 122.5 × 107.1 × 28 mm • 230 g
    Certifications CE, FCC, IC, Anatel
    Compliance NDAA compliant

    Downloads & Resources

    What's in the Box

    UniFi Switch Flex (USW-Flex)

    The 5-port outdoor-ready managed PoE++ switch.

    Mounting Hardware

    Brackets and screws for desk, wall, or pole installation.

    Documentation

    Quick-start guide and installation instructions.

    Not Included

    A PoE++ switch or 60 W PoE adapter is required to power the unit and unlock the full 46 W PoE budget (sold separately).

    Best For

    Outdoor Camera Clusters

    Power and connect several UniFi cameras from one PoE++ uplink at the far end of a run.

    Remote Access Points

    Extend wired backhaul and PoE to APs in sheds, gates, and outbuildings.

    Desk & Edge Expansion

    Add managed ports to a desk or AV rack without running a new power circuit.

    IoT & Smart Sites

    Segment and power IoT devices with VLANs and port isolation on the network edge.

    • Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application 5.10.3 or later.
    • Power the switch with a PoE++ source or 60 W PoE adapter to access the full 46 W downstream PoE budget.
    • Lower-power inputs still work: PoE+ input gives 20 W and standard PoE input gives 8 W of downstream PoE.
    • Mounts to desk, wall, or pole; suited to sheltered outdoor placements within its rated temperature range.

    Frequently Asked Questions

    How is the USW-Flex powered?

    Entirely over its PoE input port. Use a PoE++ switch or a 60 W PoE adapter to get the full 46 W of downstream PoE; PoE+ and standard PoE inputs work too, with smaller budgets.

    How much PoE can it deliver to my devices?

    Up to 46 W total across four PoE+ ports (25 W max per port) when fed by a PoE++ source — enough for UniFi cameras, access points, and IoT devices.

    Can it be used outdoors in Australia?

    Yes. It's outdoor-ready with a polycarbonate enclosure rated from −40°C to 65°C and 5–95% humidity, suiting sheltered outdoor and harsh Australian conditions.

    Do I need a controller to manage it?

    Yes. The USW-Flex is managed through the UniFi Network application running on a UniFi Cloud Gateway, Dream Machine, or Cloud Key — there are no per-device licence fees.

    Is the USW-Flex NDAA compliant?

    Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites.

    Fast AU Shipping
    Genuine Ubiquiti Stock
    Expert AU Support

    Recently viewed products

      © 2026 CCTV Guru ACN 658 678 525

        • PayPal
        • Apple Pay
        • Visa
        • Mastercard
        • American Express
        • Zip
        • Afterpay
        • Klarna
        • Google Pay
        • Shop Pay

        Login

        Forgot your password?

        Don't have an account yet?
        Create account