5GHz Band — Less Interference, More Throughput
Operating on the 5GHz band — far less congested than 2.4GHz in most Australian environments — the LocoM5 is ideal for high-throughput tasks like CCTV video, VoIP, and data backhaul where neighbouring Wi-Fi would degrade a 2.4GHz link.
13dBi Integrated MIMO Antenna — 10+ km Range
The integrated 13dBi dual-polarisation MIMO antenna delivers focused signal for point-to-point links up to 10+ km in line-of-sight conditions. No external antenna required — it's a complete, self-contained unit.
airMAX TDMA — Low Latency, High Efficiency
Ubiquiti's proprietary airMAX TDMA protocol schedules transmissions to eliminate hidden-node interference and reduce latency — even when multiple units share the same frequency. Essential for WISP and multi-client deployments.
Up to 150Mbps Real Throughput
Delivers up to 150Mbps of real-world throughput — ample for HD CCTV streams, VoIP, and general backhaul across a wireless bridge. Actual figures depend on distance, line of sight, and RF environment.
airOS Web Management
Configured via the airOS web interface from any browser — supports station, access point, bridge, and router modes. Manage multiple units centrally with airControl. No proprietary software needed for basic setup.
24V Passive PoE — Single-Cable Install
Powered by the included 24V passive PoE adapter; power and data run over one Ethernet cable, removing the need for a power outlet at the device. Ideal for rooftop, pole, and remote installs.
Weatherproof Outdoor Housing
A UV-stabilised, rain-resistant housing rated for permanent outdoor deployment across Australian conditions — coastal, tropical, and outback — with a wide −30°C to +75°C operating range.
Compact CPE Form Factor
Smaller and lighter than the full NanoStation M5, the LocoM5 suits residential rooftops, small buildings, and any install where a low-profile, easy-to-aim device is preferred.
Building-to-Building Bridge (P2P)
Link two buildings with a high-speed wireless connection — office to warehouse, house to shed, main building to outbuilding. Buy 2 units: one as access point, one as station, for up to 150Mbps over 10+ km line of sight.
CCTV Camera Backhaul
Stream HD CCTV from a remote camera location back to an NVR or DVR over a wireless link where cabling is impractical. The 5GHz band handles multiple HD streams without congestion.
Rural & Remote Internet Extension
Extend connectivity to a farm shed, granny flat, remote office, or caravan-park amenities block without trenching cable. Pair with a router at the remote end for full network access.
WISP Access Point / Client
Deploy as a WISP access point or subscriber CPE. airMAX TDMA handles multiple simultaneous clients efficiently with low latency and fair bandwidth allocation.
Temporary & Construction Networks
Fast to deploy and easy to reposition — ideal for temporary wireless networks on construction sites, events, and worksites where permanent cabling isn't viable.
Access Point Backhaul
Use a LocoM5 pair to backhaul traffic from a remote Wi-Fi access point to the main switch — extending coverage without running new cable.
1 × Ubiquiti NanoStation Loco M5 (LOCOM5)
5GHz outdoor CPE with integrated 13dBi dual-polarisation MIMO antenna and weatherproof housing. Single unit — buy 2 for a complete P2P bridge.
1 × PoE Adapter (24V Passive)
Ubiquiti 24V passive PoE injector included — powers the LocoM5 over the Ethernet run. No separate power supply needed at the device.
Mounting Hardware
Pole/wall mounting bracket and hardware for standard outdoor installation.
Quick Start Guide
Ubiquiti quick start documentation. Configuration is performed via the airOS web interface from any browser on the same network segment.
Do I need one or two units for a wireless bridge?
You need two units for a point-to-point bridge — one at each end. This listing is for a single unit only. Add 2 to cart: one is configured as an access point, the other as a station.
What is the maximum range of the LocoM5?
The LocoM5 can achieve 10+ km in clear line-of-sight conditions. Real-world range depends on terrain, obstructions, RF interference, and antenna alignment. For links over 5 km, precise alignment and a clear Fresnel zone matter.
What's the difference between the LocoM5 and the NanoStation M5?
The LocoM5 is smaller with a 13dBi antenna, ideal for short-to-medium links and residential deployments. The NanoStation M5 has a higher-gain antenna for longer links and higher-density WISP use. Both use airMAX TDMA.
Does the LocoM5 include a PoE adapter?
Yes — a 24V passive PoE adapter is included. Run a single Cat5e or Cat6 cable from the adapter to the LocoM5; no separate injector is required.
Can I use the LocoM5 for CCTV camera backhaul?
Yes — it's widely used for CCTV backhaul in Australia. The 5GHz band handles multiple HD streams without congestion. Pair two units to link a remote camera location to your NVR.
How do I configure the LocoM5?
Configuration is done via the airOS web interface — connect a laptop to the same network segment and access it via browser (default IP 192.168.1.20). No proprietary software is required for basic setup.
Do you ship Australia-wide?
Yes — fast dispatch to every state and territory from Australian stock, with expert local support for link planning and airOS configuration.
