Ubiquiti UniFi USW-24-POE Switch - 24-Port Gigabit, 16x PoE+, 2x SFP, 120W, Touch Display, Fanless (Gen2)

Description

UniFi Switching — NDAA Compliant

Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2)

The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping.

Ports
24x GbE + 2x SFP
PoE+
16 Ports • 95W
Switching
52 Gbps
Cooling
Fanless / Silent

Why Choose the UniFi USW-24-POE?

24 Gigabit Ports + 2 SFP Uplinks

Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network.

16x 802.3at PoE+ — 95W Total

Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability.

52 Gbps Switching Capacity

A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks.

Silent Fanless Design

A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters.

1.3″ Touchscreen Display

An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks.

Advanced Layer 2 Features

Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control.

UniFi Network Managed

Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees.

NDAA Compliant

Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required.

Technical Specifications

Model USW-24-POE (UniFi Standard 24 PoE, Gen2)
Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP
PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port
Total PoE Availability 95W
Switching Capacity 52 Gbps
Non-Blocking Throughput 26 Gbps
Forwarding Rate 39 Mpps
Supported VLANs 1,000
MAC Address Table 8,000
Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN
Display 1.3″ touchscreen LCM
Cooling Fanless (passive)
Form Factor Rack mount (1U)
Power Method Universal input 100–240V AC, 50/60 Hz
Power Supply AC/DC internal, 120W
Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output)
Management UniFi Network (v7.2.94 and later)
Enclosure SGCC steel
Dimensions / Weight 442 × 200 × 44 mm • 3 kg
Operating Temperature −5°C to 40°C, 10–90% non-condensing
ESD Protection Air: ±16 kV • Contact: ±12 kV
Certifications CE, FCC, IC, Anatel
Compliance NDAA compliant

Downloads & Resources

Best For

UniFi Networks

Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller.

Offices & Studios

Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces.

Retail & Hospitality

Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit.

SOHO Racks

Compact 1U depth and a touch display suit small server cabinets and comms cupboards.

  • Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host.
  • 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget.
  • Two 1G SFP ports accept fibre or DAC uplinks into your core network.
  • Mounts in a standard 1U rack; fanless design needs no special ventilation.

Frequently Asked Questions

How many PoE ports does the USW-24-POE have?

Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch.

Does it require a separate controller?

It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees.

Is it fanless?

Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments.

What are the SFP ports for?

The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core.

Is the USW-24-POE NDAA compliant?

Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites.

Fast AU Shipping
Genuine Ubiquiti Stock
Expert AU Support

Ubiquiti UniFi USW-24-POE Switch - 24-Port Gigabit, 16x PoE+, 2x SFP, 120W, Touch Display, Fanless (Gen2)

Product form

SKU: USW-24-POE

$779.99 Incl. GST

    • PayPal
    • Apple Pay
    • Visa
    • Mastercard
    • American Express
    • Zip
    • Afterpay

    • Shipped today? Order within: Jul 07, 2026 14:00:00 +1000
    • Warranty: 12 months
    • 30 day Money Back Guarantee
    • Australian Stocks & Express Delivery
    • Back-to-base Warranty & Tech Support
    • FREE Shipping over $180

    Description

    UniFi Switching — NDAA Compliant

    Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2)

    The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping.

    Ports
    24x GbE + 2x SFP
    PoE+
    16 Ports • 95W
    Switching
    52 Gbps
    Cooling
    Fanless / Silent

    Why Choose the UniFi USW-24-POE?

    24 Gigabit Ports + 2 SFP Uplinks

    Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network.

    16x 802.3at PoE+ — 95W Total

    Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability.

    52 Gbps Switching Capacity

    A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks.

    Silent Fanless Design

    A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters.

    1.3″ Touchscreen Display

    An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks.

    Advanced Layer 2 Features

    Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control.

    UniFi Network Managed

    Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees.

    NDAA Compliant

    Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required.

    Technical Specifications

    Model USW-24-POE (UniFi Standard 24 PoE, Gen2)
    Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP
    PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port
    Total PoE Availability 95W
    Switching Capacity 52 Gbps
    Non-Blocking Throughput 26 Gbps
    Forwarding Rate 39 Mpps
    Supported VLANs 1,000
    MAC Address Table 8,000
    Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN
    Display 1.3″ touchscreen LCM
    Cooling Fanless (passive)
    Form Factor Rack mount (1U)
    Power Method Universal input 100–240V AC, 50/60 Hz
    Power Supply AC/DC internal, 120W
    Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output)
    Management UniFi Network (v7.2.94 and later)
    Enclosure SGCC steel
    Dimensions / Weight 442 × 200 × 44 mm • 3 kg
    Operating Temperature −5°C to 40°C, 10–90% non-condensing
    ESD Protection Air: ±16 kV • Contact: ±12 kV
    Certifications CE, FCC, IC, Anatel
    Compliance NDAA compliant

    Downloads & Resources

    Best For

    UniFi Networks

    Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller.

    Offices & Studios

    Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces.

    Retail & Hospitality

    Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit.

    SOHO Racks

    Compact 1U depth and a touch display suit small server cabinets and comms cupboards.

    • Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host.
    • 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget.
    • Two 1G SFP ports accept fibre or DAC uplinks into your core network.
    • Mounts in a standard 1U rack; fanless design needs no special ventilation.

    Frequently Asked Questions

    How many PoE ports does the USW-24-POE have?

    Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch.

    Does it require a separate controller?

    It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees.

    Is it fanless?

    Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments.

    What are the SFP ports for?

    The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core.

    Is the USW-24-POE NDAA compliant?

    Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites.

    Fast AU Shipping
    Genuine Ubiquiti Stock
    Expert AU Support

    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account