UniFi Protect — NDAA Compliant UniFi Protect G5 Dome — 2K 4MP PoE Vandal-Resistant Camera (UVC-G5-Dome) The UniFi Protect G5 Dome is a compact 2K (4MP) PoE dome camera built for overhead surveillance with seamless UniFi Protect integration over a single network cable. A high-sensitivity 5 MP CMOS sensor pairs with enhanced dynamic range and improved low-light performance to deliver clear forensic footage at 30 FPS, while on-device smart detections flag people, vehicles, and animals. Whether you're securing a home, office, retail space, or commercial site anywhere in Australia, the G5 Dome gives you enterprise-grade surveillance with no monthly fees and no cloud lock-in — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 2K / 4MP Night Vision IR 9 m Protection IPX4 / IK08 Power Single-Cable PoE Why Choose the UniFi Protect G5 Dome? 2K 4MP Clarity A 5 MP CMOS sensor captures 2K footage at 2688 × 1512 (16:9) and 30 FPS — far more detail than standard 1080p cameras for reviewing incidents with confidence. Smart Detections On-camera detection identifies people, vehicles, and animals, helping cut nuisance alerts so you can focus on what actually matters. Wide 102.4° Field of View Cover large rooms, entries, and building perimeters with minimal blind spots — the 102.4° horizontal FOV is ideal for open indoor areas and covered entry points. 9 m IR Night Vision Built-in IR LEDs and an IR cut filter deliver clear black-and-white footage in total darkness up to 9 metres — no extra lighting required. IK08 Vandal-Resistant + Two-Way Audio A hard-coated dome and IK08 impact rating resist tampering, while a built-in mic and speaker enable two-way audio through the UniFi Protect app. IPX4 rated while covered. Single-Cable PoE Installation One Ethernet cable delivers both power and data (max 5 W) — no separate power run required. Works with any 802.3af PoE switch, plus a 3-axis gimbal for easy manual aiming. UniFi Protect — No Subscription Manage live views, recordings, and smart alerts through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UVC-G5-Dome Resolution 2K — 4 MP, 2688 × 1512 (16:9) @ 30 FPS Image Sensor 5 MP CMOS Lens Fixed focal length Field of View H: 102.4° • V: 54.9° • D: 120.6° Night Vision Built-in IR LED illumination + IR cut filter, up to 9 m Smart Detections People, vehicles, animals Audio Two-way audio (built-in microphone & speaker) Weatherproof Rating IPX4 (while covered) Impact / Tamper Resistance IK08 Network Interface 10/100 MbE RJ45 port Power Method PoE, 37–57 V DC • max 5 W Processor Dual-core Arm® Cortex®-A7 based chip Mounting Wall & ceiling (included); junction box, arm mount (optional) • 3-axis adjustment Enclosure Aluminium alloy, polycarbonate, hard-coated dome Dimensions / Weight ⌀109.2 × 64.5 mm • 370 g (390 g with mount) Operating Temperature −20°C to 40°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UVC-G5-Dome Datasheet Ubiquiti Dome Quick Start Guide What's in the Box UniFi Protect G5 Dome Camera UVC-G5-Dome with internal 3-axis gimbal for pan, tilt, and rotation adjustment. Mounting Kit Wall & ceiling mounting bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Entries Wide 2K coverage of hallways, entries, and covered porches with accurate person and vehicle alerts. Retail & Hospitality Overhead coverage of shop floors and tills, with smart detection cutting nuisance notifications. Offices & Reception Local UniFi Protect recording with no subscription — discreet dome form factor for indoor spaces. Covered Outdoor Areas IK08 vandal resistance and IPX4 rating suit covered walkways, carports, and sheltered entries. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE) running UniFi Protect. Powered by any 802.3af PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to wall or ceiling out of the box; junction-box and arm-mount adapters available separately. Internal 3-axis gimbal lets you fine-tune the field of view after mounting. IPX4 is rated while covered — install under eaves or in a sheltered position for outdoor use. Frequently Asked Questions Does the G5 Dome require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G5 Dome? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE — plus an 802.3af PoE switch to power the camera. Can the G5 Dome be used outdoors in Australia? It carries an IPX4 rating while covered and an IK08 vandal-resistant housing, so it suits covered outdoor areas like eaves, carports, and sheltered entries rather than fully exposed positions. Is it really 2K and not 4K? Yes — the G5 Dome records 2K (4 MP) at 2688 × 1512, which is noticeably sharper than 1080p. For true 4K, look at the UniFi Protect G6 range. Does it support two-way audio? Yes. A built-in microphone and speaker let you listen and talk back through the UniFi Protect app. Is the G5 Dome NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G5 Dome is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi OS Console — NDAA Compliant Ubiquiti UDM-Pro — All-in-One UniFi OS Gateway, Network Controller & UniFi Protect NVR The UniFi Dream Machine Pro (UDM-Pro) is Ubiquiti's flagship all-in-one UniFi OS Console — combining an enterprise-grade security gateway, the UniFi Network controller, a UniFi Protect NVR, and a threat-management engine in a single 1U rack-mount device. Driven by a fast 1.7 GHz quad-core processor, with 8 × Gigabit RJ45 LAN, dual 10G SFP+ (WAN + LAN), and a 3.5″ HDD bay for local camera recordings, the UDM-Pro is the ideal foundation for professional home, office, and small-business networks across Australia — with genuine Ubiquiti stock and fast Australia-wide shipping. LAN Ports 8 × GbE + 10G WAN GbE + 10G SFP+ NVR Storage 3.5″ HDD Bay Threat Mgmt 3.5 Gbps IDS/IPS Why Choose the UniFi Dream Machine Pro? All-in-One UniFi OS Console Runs the complete UniFi application suite — UniFi Network, UniFi Protect, and more — from a single device. Eliminates the need for separate controllers, gateways, and NVR hardware. Enterprise Security Gateway A full security gateway with advanced threat management, IDS/IPS (up to 3.5 Gbps), traffic identification, and deep packet inspection — protecting your network at speed. 8 × Gigabit LAN + 10G SFP+ LAN Nine LAN ports including eight Gigabit RJ45 and one 10G SFP+ — enough to connect switches, APs, and devices directly without extra hardware for smaller deployments. Dual WAN — GbE + 10G SFP+ One Gigabit RJ45 WAN and one 10G SFP+ WAN port support dual-WAN failover and load balancing — keeping your network online even if one ISP connection drops. Built-in UniFi Protect NVR The 3.5″ HDD bay enables local UniFi Protect camera recordings directly on the UDM-Pro — no separate NVR required for smaller camera deployments. UniFi Network Controller Pre-Installed Manage your entire UniFi network — switches, access points, and clients — through the built-in UniFi Network application. No separate cloud key or controller hardware needed. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your network and cameras running during power events. NDAA Compliant Fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive Australian installations where supply-chain integrity is required. Ideal Use Cases Small to Medium Business Replace multiple separate devices — gateway, controller, NVR — with a single UDM-Pro. Ideal for offices, retail stores, and professional services firms. Advanced Home Networks Power users and home-lab enthusiasts who want enterprise-grade routing, threat management, and UniFi Protect camera recording in one clean rack-mount unit. UniFi Protect Camera Systems The UDM-Pro doubles as a UniFi Protect NVR — connect UniFi cameras and record locally without a separate UNVR. Multi-WAN & Failover Deployments Businesses requiring dual-WAN failover or load balancing across fibre and 4G/5G connections for maximum uptime. Technical Specifications Model UDM-Pro Form Factor 1U rack-mount Processor 1.7 GHz quad-core System Memory 4 GB LAN Ports 8 × Gigabit RJ45 • 1 × 10G SFP+ WAN Ports 1 × Gigabit RJ45 • 1 × 10G SFP+ IDS/IPS Throughput Up to 3.5 Gbps HDD Bay 1 × 3.5″ SATA (for UniFi Protect, drive not included) UniFi Applications UniFi Network • UniFi Protect • UniFi OS Threat Management IDS/IPS, traffic identification, deep packet inspection Power Redundancy USP-RPS compatible (sold separately) Management UniFi OS • UniFi app (iOS/Android) • Web UI Display 1.3″ touchscreen Compliance NDAA compliant What's in the Box UDM-Pro Unit All-in-one UniFi OS Console with pre-installed UniFi Network and UniFi Protect. Rack-Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included 3.5″ HDD for UniFi Protect storage and cameras are sold separately. Frequently Asked Questions Does the UDM-Pro require a UniFi subscription? No. UniFi Network and UniFi Protect run fully locally on the UDM-Pro. There are no monthly fees or cloud subscriptions required for full functionality. Can the UDM-Pro run UniFi Protect for cameras? Yes. Install a 3.5″ HDD in the built-in bay and the UDM-Pro acts as a UniFi Protect NVR — supporting UniFi cameras for local recording and AI detection. What is the difference between the UDM-Pro and UDM-SE? The UDM-SE adds 8 × built-in PoE ports (allowing direct camera and AP power), a 2.5 GbE RJ45 WAN port, and an internal M.2 storage option. The UDM-Pro has no built-in PoE but offers dual 10G SFP+ and is well suited to pure routing/gateway and NVR deployments. Does it support dual-WAN failover? Yes. The UDM-Pro supports dual-WAN failover and load balancing across the Gigabit RJ45 WAN and 10G SFP+ WAN ports. What hard drive do I need for UniFi Protect? Any compatible 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording reliability. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Is the UDM-Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UDM-Pro is NDAA Section 889 compliant — suitable for government and security-sensitive Australian sites. Downloads & Resources UDM-Pro Tech Specs Quick Start Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G6 Bullet — 4K 8MP PoE AI Camera (UVC-G6-Bullet) The UniFi Protect G6 Bullet is the flagship outdoor bullet camera in the UniFi Protect ecosystem — delivering true 4K 8MP resolution from a large 1/1.8″ sensor, an on-device Multi-TOPS AI engine, and 30 m long-range IR night vision over a single PoE cable. Whether you're securing a home, driveway, retail shopfront, warehouse, or commercial perimeter anywhere in Australia, the G6 Bullet gives you enterprise-grade surveillance with no monthly fees and no cloud lock-in. Available in White (UVC-G6-Bullet-W) and Black (UVC-G6-Bullet-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 4K / 8MP Night Vision IR 30 m Protection IP66 / IK04 Power Single-Cable PoE Why Choose the UniFi Protect G6 Bullet? True 4K 8MP Clarity A large 1/1.8″ 8MP sensor captures 4K UHD footage (3840 × 2160) at 30 FPS with HDR — enough detail to identify faces, read number plates, and review incidents with confidence at distance. Multi-TOPS AI Engine On-camera AI detects people, vehicles, animals, faces, and number plates in real time — dramatically reducing false alerts and letting you act on what actually matters. Wide 109.9° Field of View Cover more ground with fewer cameras. The 109.9° horizontal FOV is ideal for driveways, car parks, building perimeters, and open outdoor areas where wide coverage matters. 30 m IR Night Vision Built-in IR LEDs illuminate up to 30 metres in complete darkness, ensuring clear, detailed footage 24/7 without any additional lighting infrastructure. IP66 Weatherproof + IK04 Tamper-Resistant A polycarbonate and aluminium-alloy body sealed to IP66 shrugs off rain, dust, and moisture, while IK04 impact resistance and a −20°C to 50°C operating range keep it reliable through tough Australian conditions. Single-Cable PoE Installation One Ethernet cable delivers both power and data (max 9.9 W) — no separate power run, no electrician required. Wall, ceiling, and pole mounts are included for fast, flexible installs. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and camera settings through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-Bullet (White: UVC-G6-Bullet-W / Black: UVC-G6-Bullet-B) Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS Lens Fixed focal length Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI Engine) Image Settings Colour, brightness, sharpness, contrast, white balance, exposure, 2DNR, 3DNR, masking, text overlay, HDR Audio Built-in microphone Weatherproof Rating IP66 Impact / Tamper Resistance IK04 Network Interface 10/100 MbE RJ45 Power Method PoE, 37–57 V DC • max 9.9 W Processor Quad-core Arm® Cortex®-A53 based chip Mounting Wall, ceiling & pole mount (included); junction box & angled base (optional); pole Ø 38–50 mm Enclosure Polycarbonate & aluminium alloy Dimensions Without mount: Ø82 × 88.8 mm • With mount: Ø82 × 153 mm Weight Without mount: 587 g • With mount: 737 g Operating Temperature −20°C to 50°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-Bullet-W) / Black (UVC-G6-Bullet-B) Downloads & Resources UVC-G6-Bullet Datasheet Ubiquiti Bullet Quick Start Guide What's in the Box UniFi Protect G6 Bullet Camera Your choice of White (UVC-G6-Bullet-W) or Black (UVC-G6-Bullet-B) finish. Mounting Kit Wall, ceiling & pole mount, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Driveways Wide 4K coverage of driveways, front yards, and entries with accurate person and vehicle alerts. Retail & Shopfronts Monitor shopfronts, car parks, and loading bays in sharp 4K with AI filtering that cuts nuisance alerts. Warehouses & Industrial Long-range 30 m IR and 4K detail suit large floors, loading docks, and perimeter fencing. Car Parks & Gates Number-plate recognition and pole mounting keep entry points covered around the clock. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any 802.3af-class PoE switch — pair with a UniFi PoE switch for single-pane management. Wall, ceiling, and pole mounts are included; junction-box and angled-base adapters available separately. Pole-mount bracket fits poles Ø 38–50 mm for perimeter and car-park installs. Frequently Asked Questions Does the G6 Bullet require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G6 Bullet? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the camera. Is it suitable for outdoor use in Australia? Yes. IP66 weatherproofing, IK04 impact resistance, and a −20°C to 50°C range suit Australian outdoor environments including coastal, high-humidity, and high-UV areas. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-G6-Bullet-W) suits light walls and soffits; Black (UVC-G6-Bullet-B) suits dark surfaces and discreet installs. Can it read number plates and recognise faces? Yes. The Multi-TOPS AI engine includes number-plate recognition and face recognition alongside people, vehicle, and animal detection. Can the G6 Bullet be pole mounted? Yes. Wall, ceiling, and pole mounts are included in the box, with the pole bracket fitting poles 38–50 mm in diameter — ideal for perimeter fencing and car parks. Is the G6 Bullet NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G6 Bullet is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G4 Doorbell Pro PoE Kit (White) — Dual-Camera PoE Video Doorbell (UVC-G4 Doorbell Pro PoE Kit) The UniFi Protect G4 Doorbell Pro PoE Kit is Ubiquiti's flagship video doorbell — a dual-camera intercom with a forward-facing main camera plus a downward package-detection camera, a programmable colour display, two-way audio, and AI event detection, all powered over a single PoE cable. The kit bundles the doorbell with a UP-Chime PoE for plug-and-play installation. Recording locally through UniFi Protect with no monthly fees, it's ideal for homes, offices, and apartments anywhere in Australia. Supplied in White with genuine Ubiquiti stock and fast Australia-wide shipping. Cameras Dual (Main + Package) Night Vision IR + IR Cut Audio 2-Way Power Single-Cable PoE Why Choose the UniFi Protect G4 Doorbell Pro PoE Kit? Dual-Camera Coverage A 5 MP main camera watches visitors face-on with a wide field of view, while a dedicated 8 MP downward package camera keeps an eye on parcels left at your doorstep — coverage a single-lens doorbell can't match. Programmable Welcome Display A built-in colour screen shows a programmable welcome message or status to visitors, adding a polished, customisable touch to your entrance. AI Event Detection On-device AI flags meaningful events so you're alerted to what matters at the door — cutting nuisance notifications and helping you respond faster. Improved HDR & Low-Light Enhanced HDR processing plus built-in IR illumination and an IR cut filter deliver clear footage day and night, even in harsh backlight at the doorstep. Two-Way Audio Integrated microphone and speaker let you talk to visitors and couriers from the UniFi Protect app — answer the door from anywhere. Includes UP-Chime PoE The kit bundles a PoE-powered chime so the doorbell rings indoors out of the box — no separate transformer or existing chime wiring required. Single-Cable PoE Installation One Ethernet cable carries both power and data to the doorbell (max 7 W) over its Gigabit RJ45 port — no doorbell transformer, no separate power run. UniFi Protect — No Subscription Live view, recordings, AI alerts, and settings are managed through the UniFi Protect app or web interface — full local control with no monthly fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model UVC-G4 Doorbell Pro PoE Kit (White) — includes UVC-G4 Doorbell Pro + UP-Chime PoE Main Camera Sensor 5 MP CMOS Package Camera Sensor 8 MP CMOS Lens Fixed focal length (both cameras) Video Resolution Main: 2 MP, 1600 × 1200 (4:3) • Package: 2 MP, 1600 × 1200 (4:3) Max. Frame Rate 30 FPS Field of View (Main) H: 160° • V: 117° • D: 160° (LDC off) • H: 138°/V: 114°/D: 155° (LDC on) Field of View (Package) H: 97.5° • V: 79.4° • D: 118.2° Night Mode Built-in IR LED illumination + IR cut filter Display Programmable welcome display AI / Smart Detection AI event detections (UniFi Protect) Audio Microphone + speaker (2-way) • UP-Chime PoE buzzer Weatherproofing IPX4 (UVC-G4 Doorbell Pro) Network Interface Doorbell: GbE RJ45 • UP-Chime PoE: 10/100 MbE Power Method PoE • Doorbell: 37–57 V DC, max 7 W • Chime: 44–57 V DC, max 3.5 W Processor Quad-core Arm® Cortex®-A53 Buttons (1) Ring button • (1) Factory reset Enclosure Aluminium alloy & polycarbonate Dimensions / Weight Doorbell: 160.6 × 51.7 × 35.1 mm, 264 g • Chime: ⌀62 × 54 mm, 158 g Operating Temperature Doorbell: −30°C to 40°C • Chime: 0°C to 40°C Operating Humidity Doorbell: 0–90% • Chime: 10–90% non-condensing Software UniFi Protect • UniFi Protect app for iOS™ & Android™ Certifications CE, FCC, IC Compliance NDAA compliant Colour White Downloads & Resources UVC-G4 Doorbell Pro Datasheet Ubiquiti Installation Guide What's in the Box UVC-G4 Doorbell Pro (White) Dual-camera PoE video doorbell with programmable display and ring button. UP-Chime PoE PoE-powered indoor chime so the doorbell rings without a transformer. Mounts & Hardware Wall mount, wedge, on-wall mount, and chime mounts with fixings included. Not Included A PoE switch/injector and network cabling are required and sold separately. Best For Homes & Front Doors See visitors face-on and watch parcels left on the doorstep with the dedicated package camera. Apartments & Units Two-way audio and a programmable display make a polished, secure entrance for residents. Offices & Reception Local UniFi Protect recording with AI alerts — answer the door from any UniFi Protect device. UniFi Sites Drops into an existing UniFi Protect deployment over a single PoE cable with the included chime. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, or Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any 802.3af/at PoE switch — pair with a UniFi PoE switch for single-pane management. Included UP-Chime PoE provides the indoor ring — no doorbell transformer or existing chime wiring needed. Mounts flush, angled (wedge), or on-wall using the included brackets. Frequently Asked Questions Does the G4 Doorbell Pro require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run this doorbell kit? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the doorbell and included chime. What does the second camera do? The downward-facing 8 MP package camera monitors parcels and the area directly below the doorbell, complementing the forward-facing 5 MP main camera. Is the chime included? Yes. The kit bundles a UP-Chime PoE that powers over Ethernet, so the doorbell rings indoors without a transformer or existing chime wiring. Is it weatherproof for Australian conditions? The doorbell is rated IPX4 for water resistance and operates from −30°C to 40°C. It's best installed in a covered or sheltered doorway position. Is the G4 Doorbell Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect UNVR Instant Kit — 6-Port PoE NVR + 4× G5 Turret Ultra 2K Cameras (1TB) The UniFi Protect UNVR Instant Kit is a complete, plug-and-play CCTV system built around the compact UniFi Network Video Recorder Instant with an integrated 6-port PoE switch, a pre-installed 1TB surveillance drive, and four UniFi G5 Turret Ultra 2K cameras. Designed for homes, offices, retail stores, and small commercial sites anywhere in Australia, it records everything locally with no monthly fees and no cloud lock-in. Genuine Ubiquiti stock with fast Australia-wide shipping. Cameras 4 × 2K Turret Recorder 6-Port PoE NVR Storage 1TB Pre-Installed Subscription None Required Why Choose the UniFi Protect UNVR Instant Kit? All-in-One UniFi Protect NVR The UNVR Instant pairs a quad-core ARM Cortex-A55 recorder with an integrated 6-port Gigabit PoE switch and an HDMI ViewPort output — power, record, and view your cameras from a single compact desktop unit. 4 × G5 Turret Ultra 2K Cameras Each camera captures crisp 2K (4MP, 2688 × 1512) footage at 30 FPS from a 1/2.4″ sensor, with a wide 102.4° field of view to cover entries, driveways, and open areas. 1TB HDD Pre-Installed A surveillance-grade 1TB 3.5″ drive ships pre-installed and ready to record — just connect cameras and go. The single drive bay supports larger capacities if you need longer retention. Smart AI Detection On-device AI identifies people, vehicles, and animals, filtering out nuisance motion so you only get alerts that matter. 30 m IR Night Vision Built-in IR LEDs on every camera deliver clear footage up to 30 metres in complete darkness, with an IR cut filter for accurate daytime colour. IP66 + IK04 Weatherproof Cameras Aluminium-alloy bodies sealed to IP66 with IK04 tamper resistance and a wide −30°C to 50°C range handle tough Australian indoor and outdoor conditions. No Subscription, Local Recording Manage live views, recordings, and AI alerts through the UniFi Protect app or web portal — all footage stored locally with no monthly fees or cloud dependency. NDAA Compliant Both the recorder and cameras are NDAA Section 889 compliant, suitable for government, defence, and security-sensitive installations. Technical Specifications Kit Contents 1 × UNVR Instant (with 1TB HDD) + 4 × UVC-G5-Turret-Ultra cameras NVR Processor Quad-core ARM® Cortex®-A55 @ 1.7 GHz • 4 GB memory Managed Cameras (6) 4K • (8) 2K • (15) HD PoE Ports 6 × GbE PoE RJ45 (40 W total budget, 15.4 W per port) Uplink 1 × GbE RJ45 Video Output 1 × HDMI ViewPort Storage 1 × 3.5″ HDD bay • 1TB surveillance drive included NVR Power Universal AC 100–240 V • internal 60 W PSU NVR Operating Temp 0°C to 40°C, 5–95% non-condensing Camera Resolution 2K — 4 MP, 2688 × 1512 (16:9) @ 30 FPS Camera Sensor 1/2.4″ CMOS • fixed focal length Camera Field of View H: 102.4° • V: 54.9° • D: 120.6° Night Vision Built-in IR LED + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals Camera Audio Built-in microphone Camera Weatherproof IP66 • IK04 tamper resistance Camera Power PoE, 37–57 V DC • max 4 W Camera Network 10/100 MbE RJ45 Camera Operating Temp −30°C to 50°C, 0–90% non-condensing Management UniFi Protect (app & web) • no subscription Compliance NDAA compliant • CE, FCC, IC Downloads & Resources UNVR Instant Datasheet G5 Turret Ultra Datasheet What's in the Box UniFi UNVR Instant Recorder Compact 6-port PoE NVR with HDMI ViewPort and a pre-installed 1TB surveillance HDD. 4 × G5 Turret Ultra Cameras Four 2K PoE turret cameras with integrated 30 cm RJ45 pigtail cables. Mounting Accessories Wall & ceiling brackets, screws, and anchors for each camera; wall/DIN-rail mount for the NVR. Not Included Network cabling between cameras and the NVR is required and sold separately. Best For Homes & Apartments Four 2K cameras and local recording cover entries, driveways, and yards with accurate AI alerts. Retail & Cafés Monitor tills, entrances, and stockrooms while AI filtering cuts nuisance notifications. Offices & Warehouses Subscription-free UniFi Protect recording ideal for clean, professional small-site surveillance. UniFi Ecosystems Drops straight into existing UniFi networks for single-pane management and easy expansion. Connect each G5 Turret Ultra to a PoE port on the UNVR Instant — power and data over one cable. The recorder runs UniFi Protect locally; manage via the app or web portal with no monthly fees. HDMI ViewPort gives live multi-camera viewing on a monitor without a separate PC. Single 3.5″ bay ships with 1TB installed; swap in a larger surveillance drive for longer retention. The kit manages up to 6 4K / 8 2K / 15 HD cameras total, so there's room to expand. Frequently Asked Questions Does this kit need a UniFi Protect subscription? No. UniFi Protect runs locally on the UNVR Instant. There are no monthly fees or cloud subscriptions — all footage is stored on the built-in drive. What resolution are the cameras? The four G5 Turret Ultra cameras capture 2K — 4MP at 2688 × 1512 — at up to 30 FPS, with 30 m IR night vision. Is a hard drive included? Yes. A 1TB surveillance-grade 3.5″ HDD comes pre-installed. The single bay supports larger drives if you need longer recording retention. Can I add more cameras later? Yes. The UNVR Instant manages up to 6 4K, 8 2K, or 15 HD cameras total. Additional cameras can be powered by the 6 onboard PoE ports or a separate UniFi PoE switch. Are the cameras suitable for outdoor use in Australia? Yes. The cameras are IP66 weatherproof, IK04 tamper-resistant, and rated −30°C to 50°C — suited to Australian outdoor environments including coastal and high-UV areas. Is the kit NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and both the UNVR Instant and G5 Turret Ultra cameras are NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UVC-G4 Doorbell Pro PoE Kit — UniFi Protect Dual-Camera Video Doorbell with PoE Chime The UniFi Protect G4 Doorbell Pro PoE Kit is Ubiquiti's premium PoE video doorbell — pairing a wide-angle main camera with a dedicated secondary package-detection camera, a programmable display, two-way audio, and an included PoE Chime for plug-and-play installation. With improved HDR and low-light performance, on-device AI event detection, and full UniFi Protect integration over a single PoE cable, it secures any front door, office, or retail entry across Australia with no monthly fees. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Cameras Dual 2MP FHD Night Vision IR 6 m Protection IPX4 Power Single-Cable PoE Why Choose the G4 Doorbell Pro PoE Kit? Dual-Camera Design A wide 2MP main camera covers visitors face-to-face, while a dedicated 2MP secondary package-detection camera watches the doorstep below — so deliveries are never out of frame. AI Event Detection On-device AI detects people, vehicles, and animals in real time, cutting nuisance alerts so you only get notified about what actually matters at your door. Programmable Welcome Display An integrated colour display greets visitors with custom messages, while improved HDR and low-light performance keeps faces clear day and night. Two-Way Audio & Intercom Built-in two-way audio lets you speak with visitors from the UniFi Protect app, with full two-way intercom and doorbell access support across your UniFi system. Included PoE Chime The kit ships with a PoE Chime featuring an R/G/B/W LED, speaker, and buzzer — plug it into any PoE port for an instant in-home doorbell tone, no wiring rework required. NFC Card & Keyfob Access Integrated NFC support enables card and keyfob tap access, bringing simple door entry alongside live video right at the doorbell. Single-Cable PoE Installation One Ethernet cable delivers power and data (max 7 W) — no separate power run and no transformer. Works with any standard PoE switch or UniFi PoE switch. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and chimes through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action G4 Doorbell Pro PoE Kit — installation walkthrough Technical Specifications Model UVC-G4 Doorbell Pro PoE Kit Resolution Main & package cameras: 2MP FHD — 1600 × 1200 (4:3) @ 30 FPS Image Sensors Main: 5MP CMOS • Package: 8MP CMOS Lens Fixed focal length Field of View Main: H 138° / V 114° / D 155° (LDC On) • Package: H 97.5° / V 79.4° / D 118.2° Night Vision Built-in IR LED illumination + IR cut filter, up to 6 m (20 ft) AI / Smart Detection People, vehicles, animals Audio Two-way audio Access Control NFC card & keyfob access • two-way intercom & doorbell access Weatherproof Rating IPX4 Network Interface GbE RJ45 port Power Method PoE • 37–57 V DC • max 7 W Processor Quad-core Arm® Cortex®-A53 Mounting Wall, wedge (included); gang box, junction box (optional) Enclosure Polycarbonate & aluminium alloy Dimensions / Weight 160.6 × 51.7 × 35.1 mm • 264 g Operating Temperature −30°C to 40°C, 0–90% non-condensing PoE Chime 10/100 MbE PoE • max 3 W • R/G/B/W LED, speaker & buzzer • ⌀62 × 54 mm Certifications CE, FCC, IC, SRRC Compliance NDAA compliant Downloads & Resources UVC-G4 Doorbell Pro Datasheet Ubiquiti Installation Guide What's in the Box G4 Doorbell Pro The dual-camera PoE video doorbell with integrated display. PoE Chime In-home PoE chime with R/G/B/W LED, speaker, and buzzer. Mounting Hardware Flat wall mount and 20° wedge mount included; gang/junction box adapters optional. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Front Doors See visitors face-to-face and keep an eye on doorstep deliveries with the second package camera. Retail & Reception Two-way intercom and a programmable welcome display greet customers and staff at the entrance. Offices & Buildings NFC card and keyfob access pairs door entry with live video, all inside UniFi Protect. Apartments & Villas Single-cable PoE install with a tidy included chime — no transformer or doorbell wiring rework. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any standard PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to wall or 20° wedge out of the box; gang-box and junction-box adapters available separately. Included PoE Chime plugs into any PoE port for an in-home doorbell tone. Frequently Asked Questions Does the G4 Doorbell Pro require a subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run it? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the doorbell and chime. What is the second camera for? The secondary package-detection camera points down at the doorstep so parcels and deliveries stay in frame, even when they are below the main camera's view. Is the PoE Chime included? Yes. This kit includes the PoE Chime, which provides an in-home doorbell tone with an R/G/B/W status LED, speaker, and buzzer. Is it suitable for outdoor use in Australia? Yes, when mounted in a covered location. It carries an IPX4 rating and a −30°C to 40°C operating range suited to Australian conditions. Is the G4 Doorbell Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell Pro PoE Kit is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G6 Turret — 4K 8MP PoE AI Camera (UVC-G6-Turret) The UniFi Protect G6 Turret is the flagship turret camera in the UniFi Protect ecosystem — delivering true 4K 8MP resolution from a large 1/1.8″ sensor, an on-device Multi-TOPS AI engine, and seamless UniFi Protect integration over a single PoE cable. Whether you're securing a home, office, retail space, warehouse, or commercial site anywhere in Australia, the G6 Turret gives you enterprise-grade surveillance with no monthly fees and no cloud lock-in. Available in White (UVC-G6-Turret-W) and Black (UVC-G6-Turret-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 4K / 8MP Night Vision IR 30 m Protection IP66 / IK04 Power Single-Cable PoE Why Choose the UniFi Protect G6 Turret? True 4K 8MP Clarity A large 1/1.8″ 8MP CMOS sensor captures 4K UHD footage (3864 × 2160) at 30 FPS with HDR — enough detail to identify faces, read number plates, and review incidents with confidence. Multi-TOPS AI Engine On-camera AI detects people, vehicles, animals, faces, and number plates in real time — dramatically reducing false alerts and letting you act on what actually matters. Wide 109.9° Field of View Cover more ground with fewer cameras. The 109.9° horizontal FOV is ideal for open areas, car parks, retail floors, and building entries where wide coverage is critical. 30 m IR Night Vision Built-in IR LEDs illuminate up to 30 metres in complete darkness, ensuring clear, detailed footage 24/7 without any additional lighting infrastructure. IP66 Weatherproof + IK04 Tamper-Resistant An aluminium-alloy body sealed to IP66 shrugs off rain, dust, and moisture, while IK04 impact resistance and a wide −30°C to 50°C operating range keep it reliable through tough Australian conditions. Single-Cable PoE Installation One Ethernet cable delivers both power and data (max 12.5 W) — no separate power run, no electrician required. Works with any 802.3af PoE switch or UniFi PoE switch, plus easy 3-axis manual aiming. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and camera settings through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-Turret (White: UVC-G6-Turret-W / Black: UVC-G6-Turret-B) Resolution 4K UHD — 8 MP, 3864 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Lens Fixed focal length Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI Engine) Audio Built-in microphone Weatherproof Rating IP66 Impact / Tamper Resistance IK04 Network Interface 10/100 MbE RJ45 Power Method PoE (802.3af), 37–57 V DC • max 12.5 W Processor Quad-core Arm® Cortex®-A53 Mounting Ceiling & wall (included); arm, pendant, junction box (optional) • 3-axis adjustment Enclosure Aluminium alloy & polycarbonate Dimensions / Weight ⌀100 × 95 mm • 550 g Operating Temperature −30°C to 50°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-Turret-W) / Black (UVC-G6-Turret-B) Downloads & Resources UVC-G6-Turret Datasheet Ubiquiti Turret Quick Start Guide What's in the Box UniFi Protect G6 Turret Camera Your choice of White (UVC-G6-Turret-W) or Black (UVC-G6-Turret-B) finish. Mounting Kit Ceiling & wall mounting bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Driveways Wide 4K coverage of entries, driveways, and backyards with accurate person and vehicle alerts. Retail & Hospitality Identify faces at the till and entrance while AI filtering cuts nuisance notifications. Offices & Warehouses Local UniFi Protect recording with no subscription — ideal for multi-camera commercial sites. Car Parks & Gates Number-plate recognition and 30 m IR keep entry points covered around the clock. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any 802.3af PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to ceiling or wall out of the box; arm, pendant, and junction-box adapters available separately. 3-axis manual adjustment lets you fine-tune the field of view after mounting. Frequently Asked Questions Does the G6 Turret require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G6 Turret? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus an 802.3af PoE switch to power the camera. Is it suitable for outdoor use in Australia? Yes. IP66 weatherproofing, IK04 impact resistance, and a −30°C to 50°C range suit Australian outdoor environments including coastal, high-humidity, and high-UV areas. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-G6-Turret-W) suits light soffits and walls; Black (UVC-G6-Turret-B) suits dark surfaces and discreet installs. Can it read number plates and recognise faces? Yes. The Multi-TOPS AI engine includes number-plate recognition and face recognition alongside people, vehicle, and animal detection. Is the G6 Turret NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G6 Turret is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect Accessory Ubiquiti UniFi Protect G4 Doorbell Black Cover (UVC-G4-DB-Cover-Black) The UniFi Protect G4 Doorbell Black Cover is a genuine Ubiquiti snap-on skin that lets your UniFi Protect G4 Doorbell (UVC-G4-DoorBell) blend cleanly into dark door frames, walls, and trims. The black finish gives a discreet, low-profile look while leaving the camera, ring button, and microphone fully unobstructed. A simple cosmetic upgrade with genuine Ubiquiti stock and fast Australia-wide shipping — backed by expert AU support. Model UVC-G4-DB-Cover-Black Type Cosmetic skin / cover Colour Black Compatibility UniFi Protect G4 Doorbell (UVC-G4-DoorBell) Installation Snap-on, no tools required Brand Ubiquiti — UniFi Protect Compliance NDAA compliant Discreet Black Finish Helps the G4 Doorbell blend into dark door frames, walls, and trims for a clean, low-profile install. Genuine Ubiquiti Accessory A perfect-fit cover designed specifically for the UniFi Protect G4 Doorbell — precise cutouts keep the camera, ring button, and mic clear. Tool-Free Fit Slips over your existing G4 Doorbell in seconds — no rewiring, no tools, no remounting required. NDAA Compliant Part of the Ubiquiti UniFi Protect ecosystem, suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G4 Doorbell — 2MP Wi-Fi Video Doorbell with Night Vision (UVC-G4-Doorbell) The UniFi Protect G4 Doorbell brings smart, subscription-free video monitoring to your front door. A 5MP sensor delivers crisp 1600×1200 (2MP) video at 30 FPS with a tall, person-friendly 155° diagonal view, while a built-in IR night mode, PIR motion detection, two-way audio, and a programmable display let you see and speak with visitors day or night. It connects over dual-band Wi-Fi and wires into a standard 16–24V AC doorbell transformer, recording locally to your UniFi Protect host with no monthly fees. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 2MP / 30 FPS Night Vision Built-in IR Protection IPX4 Weather Connectivity Dual-Band Wi-Fi Why Choose the UniFi Protect G4 Doorbell? Tall 155° View of Your Doorstep A 5MP sensor with a wide H:138° / V:114° / D:155° field of view captures visitors head-to-toe, plus packages left on the ground — recorded at a clear 1600×1200 (2MP) resolution at 30 FPS. Real-Time Two-Way Audio A built-in microphone and speaker let you talk with visitors or deter intruders straight from the UniFi Protect app — whether you're home, at work, or away. Programmable Built-In Display The integrated colour display can show custom messages to visitors — from a friendly greeting to "Please leave parcels here" — configurable in UniFi Protect. Night Vision & PIR Motion Detection Built-in IR LED illumination with an IR cut filter keeps footage clear after dark, while PIR-based motion detection triggers smart alerts the moment someone approaches. IPX4 Weather-Resistant A sealed polycarbonate enclosure rated IPX4 with a −10°C to 40°C operating range handles rain and the elements at the front door across Australian conditions. Easy Wired Install with Included Mounts Wires into a standard 16–24V AC doorbell transformer and ships with both flat-wall and 20° wedge mounts — angle it toward your path or driveway without extra parts. UniFi Protect — No Subscription Footage records locally to your UniFi Protect host — live view, recordings, alerts, and settings all managed through the UniFi Protect app or web interface with no monthly fees and no cloud lock-in. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UVC-G4-Doorbell Image Sensor 5 MP CMOS Video Resolution 1600 × 1200 (2 MP, 4:3) @ 30 FPS Video Compression H.264 Lens Fixed focal length Field of View H: 138° • V: 114° • D: 155° Night Vision Built-in IR LED illumination + IR cut filter Motion Detection PIR sensor Display Built-in programmable display Audio Built-in microphone (can be disabled) + speaker, two-way Networking 802.11a/b/g/n/ac Wi-Fi • Bluetooth 4.2 Processor Quad-core Arm® Cortex®-A53 Power 16–24 V AC, 50/60 Hz (standard doorbell transformer) Max Power Consumption 12 W Buttons (1) Ring button • (1) Factory reset Weatherproof Rating IPX4 Enclosure Polycarbonate Mounting Flat wall + 20° wedge (both included) Dimensions 118.3 × 46.8 × 25.8 mm Weight 130 g (without mount) Operating Temperature −10°C to 40°C, 0–90% non-condensing Software UniFi Protect (web + iOS / Android apps) Certifications FCC, IC, CE Compliance NDAA compliant Downloads & Resources UVC-G4-Doorbell Datasheet Ubiquiti Installation Guide What's in the Box UniFi Protect G4 Doorbell UVC-G4-Doorbell unit with built-in camera, display, microphone, and speaker. Mounting Kits Flat-wall mount (aluminium alloy) and 20° wedge mount (polycarbonate), screws, and anchors. Documentation Quick-start guide and installation instructions. Not Included A 16–24V AC doorbell transformer and a UniFi Protect host (UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE) are required and sold separately. Best For Homes & Apartments See and speak with visitors at the front door, with a tall view that captures packages on the ground. Offices & Receptions Greet guests with a custom on-screen message and grant entry over two-way audio. Existing UniFi Sites Adds a doorbell to any UniFi Protect deployment with no subscription and unified management. Secure Facilities NDAA-compliant hardware suited to government and security-sensitive entries. Requires a UniFi Protect host (UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE) running UniFi Protect. Wires into an existing 16–24V AC doorbell transformer; pairs with compatible mechanical and digital chimes (see datasheet list). Connects over dual-band Wi-Fi — ensure good signal at the door location. Ships with flat-wall and 20° wedge mounts to angle the view toward your path or entry. Frequently Asked Questions Does the G4 Doorbell require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi Protect host such as a UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE. There are no monthly fees or cloud subscriptions. How is it powered? It wires into a standard 16–24V AC doorbell transformer (50/60 Hz). It is not a PoE device. If you don't have an existing transformer, one will need to be installed. Is the camera 5MP or 2MP? It uses a 5MP CMOS sensor and records video at 1600×1200 (2MP, 4:3) up to 30 FPS — a tall aspect ratio ideal for seeing visitors head-to-toe and packages at the door. Can I show a message to visitors? Yes. The built-in display can be programmed with custom messages through the UniFi Protect app or web interface. Is it suitable for outdoor use in Australia? Yes. The IPX4-rated polycarbonate enclosure and a −10°C to 40°C operating range suit a sheltered front-door location. The included 20° wedge mount helps angle it toward your path. Is the G4 Doorbell NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi OS Console — Controller + Protect NVR — NDAA Compliant UniFi Cloud Key+ (UCK-G2-SSD) — UniFi OS Console with 1TB SSD, PoE Powered & UniFi Protect NVR The UniFi Cloud Key+ (UCK-G2-SSD) is the compact, PoE-powered UniFi OS Console that runs the full UniFi application suite — including UniFi Network, UniFi Protect, and UniFi Access — with a pre-installed 1TB SSD for local camera recording. Connect and power it from any PoE switch port, manage your entire UniFi network and camera system from one device, and access everything remotely via the UniFi Site Manager at unifi.ui.com — no subscription required. Genuine Ubiquiti stock with fast Australia-wide shipping. Storage 1TB SSD Power PoE / USB-C Max Cameras 8 × 4K Display 1.42″ OLED Why Choose the UniFi Cloud Key+? Pre-Installed 1TB SSD — Ready for UniFi Protect Ships with a 1TB 2.5″ SATA SSD pre-installed and ready for UniFi Protect camera recordings — no separate NVR or HDD required. The SSD is user-upgradeable for even more storage capacity. PoE Powered — Single Cable Setup Connect and power the Cloud Key+ from any standard PoE switch port via a single Ethernet cable — no separate power adapter required. Optional USB-C Quick Charge 2.0/3.0 power also supported. Full UniFi Application Suite Runs UniFi Network, UniFi Protect, and UniFi Access from a single device — manage your switch, AP, camera, and door-access infrastructure without a separate NVR or cloud key. UniFi Site Manager Integration Connects directly to the UniFi Site Manager at unifi.ui.com for remote management, multi-site visibility, and centralised control — no VPN or port forwarding required. Supports Up to 8 × 4K Cameras When dedicated to UniFi Protect, the Cloud Key+ supports up to 8 × 4K cameras, 14 × 2K cameras, or 24 × HD cameras — ideal for small to medium camera deployments. 1.42″ OLED Status Display The built-in greyscale OLED display shows system status, IP address, storage health, and network information at a glance — no app or PC required for on-site diagnostics. Bluetooth Instant Setup Initial setup via Bluetooth using the UniFi Network app — no console cable or complex configuration required. Up and running in minutes. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations across Australia where supply-chain integrity is a requirement. Ideal Use Cases Home & Small Office Networks The ideal all-in-one controller and NVR for home and small office UniFi deployments — manage switches, APs, and up to 8 × 4K cameras from one PoE-powered device. UniFi Protect Camera Systems Add UniFi Protect camera recording to any existing UniFi network without a separate UNVR — the 1TB SSD provides ample storage for small camera deployments. Multi-Site Management Connect to UniFi Site Manager for centralised remote management of multiple sites — ideal for IT managers and MSPs overseeing multiple UniFi deployments. UDM-Pro Alternative For deployments that already have a separate gateway and switch, the Cloud Key+ provides the controller and NVR functionality of a UDM-Pro at a lower cost and smaller footprint. Technical Specifications Model UCK-G2-SSD Processor Octa-core Arm® Cortex®-A53 Memory 3 GB RAM • 32 GB eMMC SSD 1 TB 2.5″ SATA SSD (pre-installed, user-upgradeable*) Network Port 1 × Gigabit RJ45 Power Method PoE • USB-C Quick Charge 2.0/3.0 (9V DC, 2A) optional Max Power Consumption 9.6 W Display 1.42″ greyscale OLED Managed Cameras 8 × 4K • 14 × 2K • 24 × HD (Protect only) Managed Access Hubs 80 (UniFi Access) Management Ethernet • Bluetooth Dimensions 131.2 × 27.1 × 134.2 mm Weight 560 g Enclosure Anodised aluminium Operating Temperature 0°C to 35°C, 20–80% non-condensing Certifications CE, FCC, IC, Anatel, SRRC Compliance NDAA compliant *SSD is user-upgradeable. Only drives that operate on 5V power are supported — drives requiring additional power are not compatible. What's in the Box UCK-G2-SSD Unit UniFi Cloud Key+ with 1TB SSD pre-installed and UniFi OS pre-configured. Power Options PoE-powered via Ethernet. Optional USB-C Quick Charge adapter (not included — requires QC 2.0/3.0 compliant adapter). Quick-Start Guide Installation guide and documentation included. PoE Switch Required A PoE switch or PoE injector is required to power the Cloud Key+ via Ethernet. Not included. Best For Homes & Small Offices All-in-one UniFi controller and Protect NVR powered from a single PoE cable. UniFi Protect Sites Local 1TB recording for up to 8 × 4K cameras with no monthly fees. MSPs & Multi-Site Centralised remote management of multiple sites via UniFi Site Manager. Gov & Compliance NDAA Section 889 compliant for defence and security-sensitive deployments. Frequently Asked Questions Does the Cloud Key+ require a subscription? No. UniFi Network and UniFi Protect run fully locally on the Cloud Key+. Remote access via UniFi Site Manager is free with a UniFi account — no monthly fees. Can it run UniFi Network and UniFi Protect at the same time? Yes, but camera capacity is reduced when running both applications simultaneously. For maximum camera support, dedicate the Cloud Key+ to UniFi Protect only. Can I upgrade the SSD? Yes. The 2.5″ SATA SSD is user-upgradeable. Only drives that operate on 5V power are supported — drives requiring additional voltage are not compatible. What is the difference between the Cloud Key+ and UDM-Pro? The Cloud Key+ is a controller and NVR only — it has no built-in gateway or routing. The UDM-Pro is an all-in-one console with a built-in security gateway, 10G SFP+, and NVR HDD bay. Choose the Cloud Key+ if you already have a separate gateway. Does it need a PoE switch? Yes. The Cloud Key+ is powered via PoE from a PoE switch or PoE injector. Alternatively, it can be powered via a USB-C Quick Charge 2.0/3.0 compliant adapter (not included). Is the Cloud Key+ NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UCK-G2-SSD is NDAA Section 889 compliant — suitable for government and security-sensitive sites in Australia. Downloads & Resources UCK-G2-SSD Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UniFi Protect Siren PoE — 110 dB Active Deterrence Alarm with RGBW LED (UP-Siren-PoE) The Ubiquiti UniFi Protect Siren PoE turns detection into action. This all-weather active-deterrence device pairs a loud 110 dB siren with bright RGBW emergency LED lighting and a colour light ring, all powered over a single PoE cable. Built into the UniFi Protect ecosystem, the UP-Siren-PoE lets your cameras and sensors trigger an on-site audible and visual warning the moment something happens — at home, in retail, in warehouses, or across commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Alarm Output 110 dB Siren Lighting RGBW LED Ring Power Single-Cable PoE Protection IP56 Weatherproof Why Choose the UniFi Protect Siren PoE? Loud 110 dB Deterrence A high-output 110 dB siren grabs attention instantly — warning intruders, alerting occupants, and reinforcing site security the moment a trigger event occurs. RGBW Emergency Lighting Bright R/G/B/W system LEDs and a colour light ring add a clear visual warning to support the audible alarm and improve noticeability day or night. Single-Cable PoE Install Power and data arrive over one Ethernet cable (max 5 W) — no separate power run and no electrician required. Connects to any standard PoE or UniFi PoE switch. IP56 All-Weather Housing An aluminium-alloy and polycarbonate enclosure sealed to IP56 with a wide −30°C to 50°C range suits exposed and semi-exposed Australian installs. UniFi Protect Integration Manage and trigger the siren through the UniFi Protect web and mobile apps as part of a wider response workflow — no monthly fees, full local control. Tamper-Aware Design A built-in tamper switch plus factory-reset button improve installation integrity and keep your UniFi Protect system aware of physical interference. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UP-Siren-PoE Product Type All-weather PoE siren with emergency LED lighting Alarm Output 110 dB Power Method PoE Max Power Consumption 5 W Network Interface (1) 10/100 MbE RJ45 port System LEDs R/G/B/W Light Ring R/G/B/W Buttons / Switches (1) Factory reset • (1) Tamper switch Mounting Wall or ceiling mounting plate (included) Dimensions 139.9 × 139.9 × 35 mm Weight 308 g Enclosure Material Aluminium alloy & polycarbonate Weatherproofing IP56 Operating Temperature −30°C to 50°C Operating Humidity 5–90% non-condensing Certifications FCC, IC, CE Compliance NDAA compliant Management UniFi Protect Web, UniFi Protect iOS & Android Downloads & Resources UP-Siren-PoE Datasheet Ubiquiti Installation Guide Frequently Asked Questions Does the siren need a separate power supply? No. The UP-Siren-PoE is powered over PoE, so power and network connectivity are delivered through a single Ethernet cable from any standard or UniFi PoE switch. Does it work on its own? It is designed for the UniFi Protect ecosystem, so it is best suited to customers already running or planning a UniFi Protect system where cameras and sensors can trigger it. Can it be installed outdoors in Australia? Yes. Its IP56 weather rating and −30°C to 50°C operating range make it suitable for many outdoor and semi-exposed Australian installations. How loud is the siren? Ubiquiti rates the alarm output at 110 dB, making it a strong on-site audible warning device. Does it provide a visual warning too? Yes. It includes R/G/B/W emergency LEDs and a colour light ring for visual deterrence alongside the siren. Is the UP-Siren-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UP-Siren-PoE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect 4K CCTV Kit — NDAA Compliant UniFi Protect 4K CCTV Kit — 4 × G6 Turret AI Cameras + UNVR Instant PoE NVR Everything you need to deploy a professional 4K UniFi Protect CCTV system in one box. This kit pairs 4 × UniFi G6 Turret 4K AI cameras with the compact UNVR Instant PoE NVR, delivering enterprise-grade surveillance for homes, offices, retail stores, and small businesses across Australia. Power the cameras straight from the NVR's built-in PoE ports, record locally to a single 3.5″ drive, and manage everything through UniFi Protect with no cloud subscription and no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping (HDD sold separately). Resolution 4K / 8MP Night Vision IR 30 m PoE Ports 6 × Built-in Compliance NDAA What's Included in the Kit 1 × UniFi Protect UNVR Instant NVR Compact PoE NVR with 6 × Gigabit PoE downlink ports, a GbE uplink, HDMI ViewPort for live local display, and a single 3.5″ HDD bay. Records and manages up to 6 × 4K cameras — no separate PoE switch required. 4 × UniFi G6 Turret 4K AI Cameras 4K 8MP turret cameras with the Multi-TOPS AI Engine (people, vehicles, animals, face and licence-plate recognition), 30 m IR night vision, IP66 weatherproofing, and IK04 tamper resistance. Mounting Hardware Ceiling and wall mounting brackets, screws, and anchors included for all four cameras, plus the UNVR Instant wall / DIN-rail mount. HDD Not Included A surveillance-grade 3.5″ SATA HDD is required for local recording. We recommend WD Purple or Seagate SkyHawk. Why Choose This UniFi Protect Kit? True 4K 8MP Clarity on All 4 Cameras Every camera captures 3864 × 2160 footage at 30 FPS from a large 1/1.8″ 8MP sensor — enough detail to identify faces, read licence plates, and review incidents with confidence across all four channels. Multi-TOPS AI — Face & Licence-Plate Recognition On-camera AI detects people, vehicles, animals, faces, and licence plates in real time — all processed locally with no cloud dependency, no subscription, and no latency. All-in-One PoE NVR The UNVR Instant powers all four cameras from its built-in PoE ports (40 W total budget, up to 15.4 W per port) — no separate PoE switch or injector to buy or wire. Single-Cable PoE Installation One Ethernet cable per camera carries both power and data from the UNVR Instant's PoE ports — clean, simple runs with no electrician required. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to the UNVR Instant to display camera feeds live — no PC, no app, and no internet required for on-site monitoring. IP66 Weatherproof & IK04 Tamper-Resistant All four G6 Turret cameras are sealed against rain and dust, IK04 impact-rated, and rated from −30°C to 50°C — suited to Australian outdoor environments including coastal and high-UV areas. No Subscription — Ever UniFi Protect runs fully locally on the UNVR Instant. No monthly fees, no cloud lock-in, no data leaving your premises — full functionality from day one. NDAA Compliant Both the cameras and the NVR are fully NDAA Section 889 compliant — suitable for government, defence, education, and security-sensitive installations. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Ideal Use Cases Home Security Cover driveways, front yards, side paths, and entry points with 4K AI cameras and local recording — no ongoing costs after setup. Retail & Shopfronts Monitor shopfronts, checkout areas, and car parks with 4K clarity, face recognition, and AI-powered alerts — all recorded locally. Small Offices & Strata Secure office entries, car parks, and common areas with a compact, self-contained system that fits in any comms cabinet. Schools & Childcare NDAA-compliant cameras and local-only recording make this kit ideal for schools, childcare centres, and education facilities. Technical Specifications NVR Model UniFi Protect UNVR Instant (UNVR-Instant) PoE Ports 6 × Gigabit PoE downlink + 1 × GbE uplink • 40 W PoE budget, up to 15.4 W per port Camera Capacity Up to 6 × 4K (or 8 × 2K / 15 × HD) HDMI ViewPort Yes — live camera display on any HDMI monitor / TV Storage 1 × 3.5″ SATA HDD bay (drive not included) NVR Processor / Memory Quad-core Arm® Cortex®-A55 @ 1.7 GHz • 4 GB Camera Model UniFi G6 Turret (UVC-G6-Turret) Camera Resolution 4K UHD — 8 MP, 3864 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LEDs + IR cut filter, up to 30 m AI Detection People, vehicles, animals, face recognition, licence-plate recognition (Multi-TOPS AI Engine) Audio Built-in microphone Weatherproof Rating IP66 Tamper Resistance IK04 Camera Power PoE (802.3af), 37–57 V DC • max 12.5 W per camera Camera Operating Temp −30°C to 50°C, 0–90% non-condensing Management UniFi Protect (app & web, no subscription) Compliance NDAA compliant • CE / FCC / IC Colours Available White (UVC-G6-Turret-W) / Black (UVC-G6-Turret-B) Recommended HDD Sizes 7 Days continuous 4 TB — Home / light commercial 14 Days continuous 6 TB — Retail / office 30 Days continuous 10 TB — Commercial / compliance 30+ Days motion-based 6 TB — AI-filtered recording Estimates based on H.265 compression, 4 × 4K cameras, 24/7 recording, moderate motion. Actual retention varies by bitrate, frame rate, and AI filtering. Surveillance-grade HDDs (WD Purple / Seagate SkyHawk) recommended for 24/7 reliability. Downloads & Resources G6 Turret Datasheet UNVR Instant Datasheet Frequently Asked Questions Does this kit require a subscription? No. UniFi Protect runs fully locally on the UNVR Instant. There are no monthly fees, no cloud subscription, and no data leaving your premises. Can the UNVR Instant power all 4 cameras? Yes. The UNVR Instant has 6 built-in PoE ports with a 40 W total budget (up to 15.4 W per port), which powers and records all four G6 Turret cameras from a single appliance — no separate PoE switch needed. What HDD do I need? Any compatible 3.5″ SATA surveillance-grade HDD. We recommend WD Purple or Seagate SkyHawk for 24/7 recording reliability. The HDD is not included in this kit. Can I add more cameras later? Yes. The UNVR Instant has 6 PoE ports and supports up to 6 × 4K cameras, so you can add two more (within the 40 W PoE budget). For larger systems, connect additional cameras via the uplink port to a separate PoE switch. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Are the cameras suitable for outdoor use in Australia? Yes. IP66 weatherproofing, IK04 tamper resistance, and a −30°C to 50°C operating range make the G6 Turret fully suited to Australian outdoor environments including coastal and high-UV areas. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UNVR-Instant — UniFi Protect Compact PoE NVR with 6-Port PoE Switch & HDMI ViewPort The Ubiquiti UNVR-Instant is the simplest way to deploy a complete UniFi Protect surveillance system — a compact desktop NVR with a built-in 6-port Gigabit PoE switch, an HDMI ViewPort for local live viewing, and a single 3.5″ HDD bay for local recording. Power and connect up to six 4K UniFi cameras directly from the unit, manage everything through the UniFi Protect app or web interface, and keep full control of your footage with no monthly subscription. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's the ideal recorder for homes, offices, and small businesses across Australia. PoE Ports 6 × Gigabit Managed Cameras Up to 6 × 4K ViewPort HDMI Output Storage 1 × 3.5″ HDD Bay Why Choose the Ubiquiti UNVR-Instant? Built-in 6-Port Gigabit PoE Switch Power and connect up to six UniFi cameras directly from the UNVR-Instant — no separate PoE switch required. A 40 W PoE budget delivers up to 15.4 W per port (802.3af PoE), plus a Gigabit RJ45 uplink to your network. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to display live multi-camera feeds straight from the unit — no PC, tablet, or app required for on-site monitoring. 3.5″ HDD Bay — Local Storage Install a compatible 3.5″ SATA hard drive for local recording, with built-in Data Protection to guard against drive failure. Keep full control of your footage — no cloud, no data leaving your premises. Manage Up to 15 Cameras Scale to suit your site — up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. UniFi Protect & Access — No Subscription Run UniFi Protect cameras and up to 50 UniFi Access hubs from one unit, managed via the UniFi app or web interface — fully local, with no monthly fees. Plug-and-Play Camera Adoption UniFi cameras connected to the PoE ports are automatically discovered and adopted into UniFi Protect — no manual IP configuration or complex setup required. Compact Desktop Form Factor At just 220 × 220 × 47 mm and 1.04 kg, the UNVR-Instant fits neatly on a shelf, in a comms cabinet, or wall / DIN-rail mounted — ideal for homes, small offices, and retail stores. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a mandatory requirement. Technical Specifications Model UNVR-Instant Managed Cameras 6 × 4K • 8 × 2K • 15 × HD Managed Access Hubs Up to 50 Management Applications UniFi Protect, UniFi Access, UniFi Connect Networking Interface 1 × GbE RJ45 uplink • 6 × GbE PoE RJ45 downlink • 1 × HDMI (ViewPort) Storage 1 × 3.5″ HDD bay (drive not included) • Data Protection Processor Quad-core ARM® Cortex®-A55 @ 1.7 GHz Memory 4 GB Display 1.14″ status screen PoE Budget 40 W total • up to 15.4 W per port (PoE / 802.3af) • 44–57 V Power Supply Internal AC/DC, 60 W • 100–240 V AC, 1.5 A max, 50/60 Hz Max. Power Consumption 9 W (excluding PoE / drive) Max. Drive Power Budget 11 W Management Ethernet • Bluetooth Mounting Wall & DIN-rail mount (included) Form Factor Compact desktop Enclosure Polycarbonate Dimensions / Weight 220 × 220 × 47 mm • 1.04 kg Operating Temperature 0°C to 40°C, 5–95% non-condensing Certifications FCC, IC, CE, Electrical Safety, SRRC, Anatel Compliance NDAA compliant Downloads & Resources UNVR-Instant Tech Specs UNVR-Instant Installation Guide What's in the Box UNVR-Instant Unit Compact UniFi Protect PoE NVR with a built-in 6-port PoE switch and HDMI ViewPort. Mounting Kit Wall and DIN-rail mounting hardware included. Documentation Quick-start guide and installation instructions. Not Included A 3.5″ SATA HDD and UniFi cameras are sold separately. Best For Homes & Driveways Power up to six 4K UniFi cameras, record locally, and watch live on your TV via HDMI ViewPort. Retail & Hospitality A self-contained, subscription-free CCTV recorder for shopfronts, cafes, and small stores. Offices & Strata Cover entries, car parks, and common areas with a tidy, low-profile NVR for any comms cabinet. UniFi Protect Starter Systems The recommended starting point for a new UniFi Protect deployment with G6 Turret, Bullet, or Dome cameras. Runs UniFi Protect locally — no monthly fees and no data leaving your premises. Connect up to six UniFi cameras directly to the built-in PoE ports; add more via a switch on the uplink, up to the supported camera count. Install a compatible 3.5″ surveillance-grade SATA HDD (sold separately) for recording. Wall or DIN-rail mountable; status screen and HDMI ViewPort make on-site setup quick. Frequently Asked Questions Does the UNVR-Instant require a UniFi Protect subscription? No. UniFi Protect runs fully locally on the UNVR-Instant. There are no monthly fees and no cloud subscription required. What hard drive do I need? A compatible 3.5″ SATA HDD. Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for 24/7 recording. The drive is not included. How many cameras can it support? Up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. Can I connect more than 6 cameras? Yes. The six built-in PoE ports power local cameras directly; additional cameras can connect via a separate PoE switch on the Gigabit uplink, up to the unit's maximum camera count. Which cameras are compatible? All UniFi Protect cameras, including the G6 Turret, G6 Bullet, G6 Dome, and earlier G4/G5 series. Can it also run UniFi Access? Yes. The UNVR-Instant supports UniFi Access and can manage up to 50 Access hubs alongside UniFi Protect cameras. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect ViewPort PoE HDMI Adapter (UFP-VIEWPORT) The UniFi Protect ViewPort (UFP-VIEWPORT) turns any HDMI display or TV into a live UniFi Protect video wall. Powered over a single PoE Ethernet cable, it connects to the local network hosting your UniFi Protect cameras and outputs up to 4K @ 30 FPS over HDMI — displaying up to 16 camera feeds simultaneously in custom high-density matrix layouts. It's the easiest way to put a permanent, always-on monitoring screen in a reception, control room, or back office anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. 4K HDMI Output Drives any HDMI display or TV at up to 4K @ 30 FPS for a crisp, full-resolution live view of your UniFi Protect cameras. Up to 16 Cameras at Once Show up to 16 IP camera feeds simultaneously in custom high-density matrix configurations — perfect for a dedicated video wall. Single-Cable PoE Both power and data arrive over one Ethernet run (PoE, up to 1 Gbps) — no separate power supply and no electrician required. Easy UniFi Protect Setup Plug-and-play integration with your existing UniFi Protect system — no extra software, no monthly fees, full local control. Technical Specifications Model UFP-VIEWPORT Function UniFi Protect ViewPort — PoE-to-HDMI video adapter Video Output HDMI, up to 4K @ 30 FPS Cameras Displayed Up to 16 IP cameras simultaneously, custom matrix layouts Network Interface RJ45, up to 1 Gbps Power Method PoE (Power over Ethernet) Software UniFi Protect (web & mobile app) Compliance NDAA compliant Downloads & Resources UFP-VIEWPORT Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine Ubiquiti IR Extender — NDAA Compliant Extend Your Night Vision Further The Ubiquiti UVC-G4-IRExtender is a long-range infrared LED accessory that boosts the night-vision reach of your UniFi Protect G4 Bullet Camera by up to 25 m (82 ft). Powered and controlled directly by the camera, it adds extra IR coverage with no separate power supply and no extra wiring. Weather resistant for outdoor installs, it is a simple, plug-and-play upgrade for darker sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Extended IR Range Boosts infrared coverage up to 25 m (82 ft) for clearer, longer-reaching night vision. Camera-Powered Powered and controlled directly by the UniFi camera — no extra power supply or wiring required. Weather Resistant Built to perform reliably in outdoor installations alongside your G4 Bullet camera. Plug-and-Play A simple long-range IR LED add-on for the UniFi Protect G4 Bullet and UniFi Video Camera G3. Technical Specifications Model UVC-G4-IRExtender Category IR Range Extender IR Range Up to 25 m (82 ft) Power Method Powered & controlled by camera Weather Resistance Yes — outdoor rated Compatible With UniFi Protect G4 Bullet (UVC-G4-BULLET), UniFi Video Camera G3 (UVC-G3) Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ (UNVR-Pro) The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Up to 60 Days Retention Install up to seven 2.5″ or 3.5″ SATA drives for massive local storage capacity — enough for up to 60 days of continuous footage from 20 × 4K cameras or 60 × Full HD cameras. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Up to 60 days (configuration dependent) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis Compliance NDAA compliant Downloads & Resources UNVR Pro Datasheet Installation Guide What's in the Box UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. Rack Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Best For Large Commercial & Enterprise Sites Factories, warehouses, and logistics hubs needing enterprise-grade recording capacity with RAID redundancy. Schools, Universities & Campuses Multi-building campuses where long retention, high camera counts, and reliable RAID storage are non-negotiable. Office Towers & Strata Complexes High-rise offices and strata complexes with server-room infrastructure and large camera deployments. Maximum-Scale UniFi Protect Systems The top-tier UniFi Protect NVR for deployments needing maximum storage, RAID protection, and enterprise uplink speeds. Mounts in any standard 2U rack space — server rooms, comms cabinets, and data centres. Pair with a UniFi PoE switch to power and manage cameras from a single pane of glass. Use surveillance-grade SATA drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording. Add a USP-RPS Power Backup for power redundancy on critical installs. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives such as WD Purple Pro or Seagate SkyHawk AI. Check Ubiquiti's HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What's the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Is the UNVR Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UNVR Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect Accessory — NDAA Compliant Ubiquiti UVC-AI-Theta-Audio — UniFi Protect AI Theta 2-Way Audio Module The Ubiquiti UVC-AI-Theta-Audio is a plug-and-play, high-performance 2-way audio module that adds clear two-way talk to your UniFi Protect AI Theta camera. It ships with an in-wall mount and a 1 m (3.3 ft) Theta audio cable, and is managed entirely within the UniFi Protect app — no subscription, no cloud lock-in. Genuine Ubiquiti stock with fast Australia-wide shipping. 2-Way Audio Adds high-performance two-way talk to the AI Theta so you can listen in and speak back through the UniFi Protect interface. In-Wall Mount + 1 m Cable Included Comes with an in-wall mount and a 1 m (3.3 ft) Theta audio cable for a clean, integrated install. Plug-and-Play with UniFi Protect Managed in the UniFi Protect application — Version 2.7.18 and later (web) / 1.11.0 and later (mobile). No monthly fees. NDAA Compliant NDAA Section 889 compliant — suitable for government, defence, and security-sensitive Australian installations. Model / SKU UVC-AI-Theta-Audio Type 2-way audio module for UniFi Protect AI Theta Included In-wall mount & Theta audio cable (1 m / 3.3 ft) Software UniFi Protect — v2.7.18+ (web) / v1.11.0+ (mobile) Compliance NDAA compliant UVC-AI-Theta-Audio Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G6 Dome 4K 4-Camera CCTV Bundle with UNVR-Instant — Australian Stock This UniFi Protect CCTV bundle pairs 4 × Ubiquiti UniFi G6 Dome 4K PoE cameras with a UniFi Network Video Recorder Instant (UNVR-Instant) for a clean, expandable, subscription-free surveillance system. Each G6 Dome captures true 4K 8MP video from a large 1/1.8″ sensor with a Multi-TOPS AI Engine, while the UNVR-Instant records everything locally over single-cable PoE. Ideal for homes, offices, retail stores, warehouses and strata sites anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Choose White or Black dome cameras to match any ceiling or fit-out. Cameras 4 × 4K 8MP Recorder UNVR-Instant Night Vision IR 30 m Protection IP66 / IK10 Why Choose This UniFi Protect G6 Dome Bundle? Four True 4K 8MP Cameras Each G6 Dome uses a large 1/1.8″ 8MP CMOS sensor to capture 4K UHD footage (3840 × 2160) at 30 FPS with HDR — sharp enough to identify faces and read number plates across four key areas. Multi-TOPS AI Engine On-camera AI detects people, vehicles, animals, faces and number plates in real time, cutting false alerts so you can act on what actually matters. UNVR-Instant with 6 PoE Ports The compact recorder powers and records all four cameras over PoE and leaves 2 spare ports to grow to a 6-camera system later — with a 40 W PoE budget and a 3.5″ drive bay for local storage. 30 m IR Night Vision Built-in IR LEDs illuminate up to 30 metres in complete darkness for clear, detailed footage around the clock without extra lighting. IP66 Weatherproof + IK10 Vandal-Resistant An aluminium-alloy body sealed to IP66 handles rain and dust, while IK10 impact resistance and a −20°C to 50°C range suit exposed and high-traffic Australian locations. Single-Cable PoE Installation One Ethernet cable carries power and data to each dome (max 9.25 W) — no separate power runs, with clean local recording on the UNVR-Instant. UniFi Protect — No Subscription Manage live views, recordings and AI alerts through the UniFi Protect app or web interface — no monthly fees, no cloud lock-in, full local control. NDAA Compliant Both the G6 Dome and UNVR-Instant are NDAA Section 889 compliant for government, defence and security-sensitive installations. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Bundle Contents 4 × UniFi G6 Dome (UVC-G6-Dome) + 1 × UniFi Network Video Recorder Instant (UNVR-Instant) Camera Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Lens Fixed focal length Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI Engine) Camera Audio Built-in microphone Weatherproof Rating IP66 Vandal / Tamper Resistance IK10 Camera Power PoE • 37–57 V DC • max 9.25 W Camera Dimensions / Weight ⌀144.7 × 96.3 mm • 820 g Camera Operating Temp −20°C to 50°C, 0–90% non-condensing Recorder Managed Cameras Up to 6 × 4K (15 HD / 8 2K) Recorder Network & PoE 1 GbE RJ45 uplink • 6 GbE PoE downlink • 1 HDMI Viewport • 40 W PoE budget • 15.4 W per port Recorder Storage (1) 3.5″ HDD bay (drive not included) Recorder Processor Quad-core Arm® Cortex®-A55 @ 1.7 GHz • 4 GB RAM Management UniFi Protect (also UniFi Access) • app & web • no subscription Compliance NDAA Section 889 compliant Certifications CE, FCC, IC Colours Available White / Black dome cameras Downloads & Resources G6 Dome Tech Specs UNVR-Instant Tech Specs What's in the Bundle 4 × UniFi G6 Dome Cameras Your choice of White or Black finish, each with the ceiling & wall mount included. 1 × UNVR-Instant Recorder Compact UniFi Protect recorder with 6 PoE camera ports and wall / DIN-rail mount. Mounting & Documentation Camera mounting hardware and quick-start guides for each device. Not Included A 3.5″ surveillance HDD and network cabling are required and sold separately. Flush mount not included. Best For Homes & Strata Discreet 4K dome coverage of entries, corridors and common areas with accurate person and vehicle alerts. Retail & Hospitality Identify faces at entrances and tills while AI filtering cuts nuisance notifications. Offices & Warehouses Local UniFi Protect recording with no subscription — ideal for multi-camera commercial sites. Room to Grow Two spare PoE ports let you add a G6 Dome, Turret or Bullet later for a 6-camera system. The UNVR-Instant runs UniFi Protect locally — no separate Cloud Key or Dream Machine is required for recording. All four cameras are powered directly from the recorder's 6 PoE ports (40 W budget) over a single Ethernet cable each. Add a 3.5″ surveillance HDD to the recorder bay for local footage retention. Each G6 Dome mounts to ceiling or wall out of the box; flush mount and weather shield are available separately. Frequently Asked Questions How many cameras are included? This bundle includes 4 × UniFi G6 Dome 4K PoE cameras plus a UNVR-Instant recorder. Can I add more cameras later? Yes. The UNVR-Instant has 6 PoE camera ports, so you can add 2 more UniFi PoE cameras for a 6-camera system without a separate switch. Does it need a UniFi Protect subscription? No. UniFi Protect runs locally on the UNVR-Instant — no monthly fees or cloud subscriptions required. Is a hard drive included? No. The UNVR-Instant has one 3.5″ drive bay; add a surveillance-rated HDD for local recording. What's the difference between White and Black? Identical specs and performance — only the dome colour differs to suit light or dark ceilings. Is this bundle NDAA compliant? Yes. Both the G6 Dome and UNVR-Instant are NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect AI Theta — Modular 4K AI Camera Hub (NHU-UVC-AI-THETA) The UniFi Protect AI Theta is a modular AI camera hub built for spaces where discreet, design-led surveillance matters. Rather than a single fixed camera, the AI Theta is a compact hub (UVC-AI-Theta-Hub) that accepts interchangeable, miniature sensor modules — and ships with two lenses included: an 8MP wide-angle lens (97.5° H) for wall-mounted coverage and a 360° fisheye lens (12MP CMOS sensor) for ceiling-mounted, all-round coverage. A built-in colour LCM status display, on-device AI engine, and single-cable PoE make it a clean fit for homes, offices, retail, and hospitality across Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping — with no monthly fees and full local UniFi Protect control. Resolution 4K AI Lenses Included Wide + 360° Smart AI Face / LPR Power Single-Cable PoE Why Choose the UniFi Protect AI Theta? Modular Hub — Two Lenses Included The AI Theta hub takes interchangeable miniature sensor modules and ships with both an 8MP wide-angle lens and a 360° fisheye lens included. Choose the right optic for each location without buying a different camera. 8MP Wide-Angle Lens (97.5° H) The wide-angle module uses an 8MP CMOS sensor with a 97.5° horizontal field of view — ideal for wall-mounted coverage of rooms, entries, and corridors at up to 24 FPS. 360° Fisheye Lens The fisheye module uses a 12MP CMOS sensor for ceiling-mounted, all-round coverage of an entire space from a single discreet point — perfect for open-plan rooms, retail floors, and reception areas. Advanced On-Device AI An on-board AI processing engine delivers face recognition, license-plate recognition, and people, vehicle & animal smart detections — cutting false alerts so you only see what matters. Colour LCM Status Display A built-in colour LCM display shows live device status at a glance, making setup, monitoring, and troubleshooting fast and intuitive. Two-Way Audio Ready Supports two-way audio with the optional AI Theta Audio module (UVC-AI-Theta-Audio, sold separately) for listen-in and talk-back from the UniFi Protect app. Single-Cable PoE Installation One Ethernet cable delivers both power and data (max 12.5 W) over a GbE RJ45 port — no separate power run. Wall, ceiling, and flush mounts are included for clean, discreet installs. UniFi Protect — No Subscription Manage live views, recordings, and AI alerts through the UniFi Protect app or web interface — local recording, no monthly fees, and no cloud lock-in. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UniFi Protect AI Theta (NHU-UVC-AI-THETA) • SKU: UVC-AI-THETA System Type Modular AI camera hub with interchangeable sensor modules Included Lenses UVC-AI-Theta-Lens (8MP wide-angle) & UVC-AI-Theta-Lens-360 (360° fisheye) — both included Wide-Angle Sensor 8 MP CMOS • 3264 × 2448 (4:3) • up to 24 FPS 360° Fisheye Sensor 12 MP CMOS • 2560 × 2560 (1:1) • up to 20 FPS Lens Fixed focal length Field of View (Wide-Angle) H: 97.5° • V: 79.4° • D: 118.2° AI / Smart Detection Face recognition, license-plate recognition, people / vehicle / animal smart detections Status Display Colour LCM display for device status monitoring Audio Two-way audio with optional AI Theta Audio module (UVC-AI-Theta-Audio, sold separately) Image Settings Colour, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay Network Interface GbE RJ45 port Power Method PoE • 37–57 V DC • max 12.5 W Processor Quad-core Arm® Cortex®-A53 based chip Mounting Wall, ceiling & flush mount (included) • angle mount (optional) Dimensions Hub: 140 × 70 × 38 mm • Lens/360: ⌀22.8 × 43.5 mm Weight Hub: 330 g • Hub mount: 35 g • Lens/360: 15 g • Flush mount: 12 g Enclosure Hub: aluminium alloy • Lens/360: aluminium alloy & polycarbonate Operating Temperature −20°C to 40°C • 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UVC-AI-Theta Datasheet Ubiquiti AI Theta Quick Start Guide What's in the Box AI Theta Hub UVC-AI-Theta-Hub with built-in colour LCM status display. Two Lens Modules 8MP wide-angle lens (UVC-AI-Theta-Lens) and 360° fisheye lens (UVC-AI-Theta-Lens-360), both included. Mounting Hardware Wall, ceiling, and flush mounts plus fixings included; angle mount available separately. Not Included A PoE switch/injector, network cable, and the optional AI Theta Audio module are sold separately. Best For Homes & Interiors Discreet, design-led coverage of living spaces, entries, and hallways without bulky cameras. Retail & Hospitality 360° ceiling coverage of floors and reception, with face and people detection that filters nuisance alerts. Offices & Reception Local UniFi Protect recording with no subscription, plus a colour LCM status display for easy monitoring. Entries & Lobbies License-plate and face recognition keep arrivals and entry points clearly identified. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, or Dream Machine Pro/SE/Wall) running UniFi Protect. Managed with UniFi Protect 2.7.18+ (web) / 1.11.0+ (mobile) or later. Powered by any PoE switch over a single GbE cable — pair with a UniFi PoE switch for single-pane management. Wall, ceiling, and flush mounts are included; the optional angle mount and AI Theta Audio module are sold separately. Frequently Asked Questions Is the AI Theta one camera or a modular system? It is a modular AI camera hub. The UVC-AI-Theta-Hub accepts interchangeable miniature sensor modules and ships with two lenses included — an 8MP wide-angle lens and a 360° fisheye lens. Are both lenses included in the box? Yes. Both the 8MP wide-angle lens (UVC-AI-Theta-Lens) and the 360° fisheye lens (UVC-AI-Theta-Lens-360) are included with the hub. Does the AI Theta require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine — no monthly fees and no cloud subscription required. Does it support two-way audio? Yes, with the optional AI Theta Audio module (UVC-AI-Theta-Audio), which is sold separately. What AI features does it have? The on-device AI engine supports face recognition, license-plate recognition, and people, vehicle, and animal smart detections. Is the AI Theta NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the AI Theta is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G6 Dome — 4K 8MP PoE AI Camera (UVC-G6-Dome) The UniFi Protect G6 Dome is the premium 4K dome in the UniFi Protect ecosystem — pairing a large 1/1.8″ 8MP sensor and an on-device Multi-TOPS AI engine with a rugged aluminium-alloy housing rated IP66 weatherproof and IK10 vandal-resistant. Whether you're securing an office, retail store, warehouse, strata building, or commercial site anywhere in Australia, the G6 Dome delivers enterprise-grade surveillance over a single PoE cable with no monthly fees and no cloud lock-in. Available in White (UVC-G6-Dome-W) and Black (UVC-G6-Dome-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 4K / 8MP Night Vision IR 30 m Protection IP66 / IK10 Power Single-Cable PoE Why Choose the UniFi Protect G6 Dome? True 4K 8MP Clarity A large 1/1.8″ 8MP CMOS sensor captures 4K UHD footage (3840 × 2160) at 30 FPS with HDR image processing — enough detail to identify faces, read number plates, and review incidents with confidence. Multi-TOPS AI Engine On-camera AI detects people, vehicles, animals, faces, and number plates in real time — all processed locally with no cloud dependency, dramatically reducing false alerts. Wide 109.9° Field of View Cover more ground with fewer cameras. The 109.9° horizontal FOV is ideal for open retail floors, car parks, building entries, and wide corridors where broad coverage is critical. 30 m IR Night Vision Built-in IR LEDs with an automatic IR cut filter illuminate up to 30 metres in complete darkness, ensuring clear, detailed footage 24/7 without any additional lighting. IP66 Weatherproof + IK10 Vandal-Resistant An aluminium-alloy body sealed to IP66 shrugs off rain and dust, while IK10 — the highest impact-resistance rating — protects against deliberate physical attack in high-risk locations. Single-Cable PoE Installation One Ethernet cable delivers both power and data (PoE 802.3af, 37–57 V DC, max 9.25 W) — no separate power run, no electrician required. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and camera settings through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. Discreet Dome in White or Black White (UVC-G6-Dome-W) suits light ceilings and modern interiors; Black (UVC-G6-Dome-B) suits dark surfaces, hospitality venues, and discreet commercial installs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-Dome (White: UVC-G6-Dome-W / Black: UVC-G6-Dome-B) Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS Lens Fixed focal length Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, licence-plate recognition (Multi-TOPS AI Engine) Audio Built-in microphone Weatherproof Rating IP66 Impact / Tamper Resistance IK10 (vandal-resistant) Network Interface 10/100 MbE RJ45 Power Method PoE (802.3af), 37–57 V DC • max 9.25 W Processor Quad-core Arm® Cortex®-A53 Mounting Ceiling & wall (included); gang-box plate, dual mount, flush mount, weather shield (optional) Enclosure Aluminium alloy body • polycarbonate mount Dimensions / Weight ⌀144.7 × 96.3 mm • 820 g Operating Temperature −20°C to 50°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-Dome-W) / Black (UVC-G6-Dome-B) Downloads & Resources UVC-G6-Dome Datasheet Ubiquiti Dome Quick Start Guide What's in the Box UniFi Protect G6 Dome Camera Your choice of White (UVC-G6-Dome-W) or Black (UVC-G6-Dome-B) finish. Mounting Kit Ceiling & wall mounting bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Retail & Shopfronts Monitor checkouts, entrances, and floors in 4K with AI person, vehicle, and face detection. Offices & Commercial Clean dome profile suits entries, corridors, and reception areas where aesthetics matter. Warehouses & Industrial IK10 vandal resistance and IP66 sealing suit loading docks and exposed industrial sites. Strata & Apartments Discreet dome design covers shared entries, lift lobbies, car parks, and common areas. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Pro Max/Wall) running UniFi Protect. Powered by any 802.3af PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to ceiling or wall out of the box; gang-box plate, dual mount, flush mount, and weather shield available separately. IK10 aluminium housing makes it suitable for high-traffic and tamper-prone locations. Frequently Asked Questions Does the G6 Dome require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G6 Dome? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Pro Max/Wall — plus an 802.3af PoE switch to power the camera. Is it suitable for outdoor use in Australia? Yes. IP66 weatherproofing and a −20°C to 50°C operating range suit Australian outdoor environments including coastal, high-humidity, and high-UV areas. What does IK10 mean? IK10 is the highest impact-resistance rating under IEC 62262 — the housing withstands 20 joules of impact, equivalent to a 5 kg mass dropped from 400 mm. Ideal for vandal-prone areas. Can it read number plates and recognise faces? Yes. The Multi-TOPS AI engine includes licence-plate recognition and face recognition alongside people, vehicle, and animal detection — all processed on-device. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-G6-Dome-W) suits light ceilings; Black (UVC-G6-Dome-B) suits dark surfaces and discreet installs. Is the G6 Dome NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G6 Dome is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant 8-Camera 4K UniFi Protect CCTV Kit — Australian Stock & Fast AU Shipping This UniFi Protect 4K CCTV Kit pairs 8× G6 AI cameras (4× bullet + 4× turret) with the rack-mount UNVR Pro recorder and a 24-port UniFi PoE switch — a complete, subscription-free surveillance system for commercial, industrial, and enterprise sites. Every camera shoots true 4K (8MP) with on-device AI, footage records locally to RAID-style protected storage on the UNVR Pro, and the whole system is powered and managed over a single PoE network. NDAA Section 889 compliant, with genuine Ubiquiti stock and fast Australia-wide shipping. Available in White and Black camera finishes. Cameras 8 × 4K / 8MP Recorder UNVR Pro 7-Bay Switch 24-Port PoE Recording Local, No Fees Why Choose This UniFi Protect Kit? 8 × True 4K G6 AI Cameras Four UVC-G6-Bullet for long-range perimeter coverage plus four UVC-G6-Turret for wide-angle indoor/outdoor monitoring — each capturing 4K (8MP) detail with on-camera AI. On-Device AI Detection G6 cameras detect people, vehicles, and animals in real time, cutting false alerts so you only get notified about what matters. UNVR Pro Enterprise Recording A 2U rack-mount recorder with 7 drive bays and built-in data protection manages up to 24× 4K cameras with long retention — ideal for compliance-driven sites. 24-Port PoE+/PoE++ Switching The USW-Pro-24-PoE powers and connects every camera over a single cable with 400 W total PoE across 16 PoE+ and 8 PoE++ ports — no injectors, no clutter. 10G SFP+ Backbone Dual 10G SFP+ uplinks on the switch and a 10G SFP+ port on the UNVR Pro give you the high-bandwidth backbone needed for multi-camera 4K video traffic. No Subscription, Full Local Control Footage stays on-site. Manage live views, recordings, and AI alerts through the UniFi Protect app or web — no monthly fees, no cloud lock-in. NDAA Compliant Every component is NDAA Section 889 compliant — enterprise- and government-ready for supply-chain-sensitive deployments. Scalable & Future-Proof Add more UniFi Protect cameras and storage as your site grows — the UNVR Pro and 24-port switch leave ample headroom for expansion. What's Included in the Kit 4 × UVC-G6-Bullet 4K (8MP) AI bullet cameras — long-range & perimeter coverage 4 × UVC-G6-Turret 4K (8MP) AI turret cameras — wide-angle indoor & outdoor monitoring 1 × UNVR Pro 2U rack-mount NVR, 7 drive bays, data protection, 10G SFP+ uplink 1 × USW-Pro-24-PoE 24-port managed PoE+/PoE++ switch, 400 W PoE, dual 10G SFP+ Mounting hardware & cables Camera mounting kits and power cables included Not included Hard drives — surveillance-grade HDDs (WD Purple / Seagate SkyHawk) recommended, sold separately Technical Specifications Camera Resolution 4K UHD — 8 MP Camera Types 4 × G6 Bullet, 4 × G6 Turret AI Detection People, vehicles, animals (on-camera) Night Vision Built-in IR, up to 30 m Camera Weatherproofing IP66 NVR UNVR Pro — 2U rack mount, (7) 2.5/3.5″ drive bays, data protection NVR Camera Capacity Up to (24) 4K cameras NVR Networking (1) 10G SFP+ + (1) GbE RJ45 Switch USW-Pro-24-PoE — 24 ports (16 PoE+ / 8 PoE++), 400 W total PoE Switch Uplinks (2) 10G SFP+ Switch Layer Layer 3, 1U rack mount Storage Local HDD on UNVR Pro (not included) Management UniFi Protect app & web — no subscription Compliance NDAA Section 889 compliant Camera Finishes White / Black Recommended Storage & Retention ~7 Days 4 × 8 TB (data protection) ~14 Days 6 × 10 TB (data protection) ~30 Days 7 × 14 TB (data protection) Retention is indicative only and varies with scene activity, frame rate, and recording settings. HDDs are sold separately so you can size storage to your needs. Downloads & Resources UNVR Pro Datasheet USW-Pro-24-PoE Datasheet Best For Warehouses & Factories Wide 4K coverage of loading docks, aisles, and yards with reliable AI person and vehicle alerts. Offices & Campuses Centralised UniFi Protect recording across multiple buildings with no per-camera licence fees. Retail & Shopping Centres Cover entries, tills, and car parks while AI filtering cuts nuisance notifications. Schools & Strata RAID-protected local storage and long retention for compliance-driven and large residential sites. All 8 cameras are powered and networked by the included 24-port UniFi PoE switch — no separate injectors required. Footage records locally to the UNVR Pro; add surveillance-grade HDDs to set your retention period. Manage the entire system through UniFi Protect — single-pane live view, playback, and AI alerts. 10G SFP+ uplinks provide a high-bandwidth backbone for multi-camera 4K traffic. Frequently Asked Questions Does this CCTV kit require a subscription? No. UniFi Protect records locally to the UNVR Pro with no licence or cloud subscription fees. Are hard drives included? No. HDDs are sold separately so you can size storage to your retention needs. Surveillance-grade drives (WD Purple / Seagate SkyHawk) are recommended. Can I expand the system later? Yes. The UNVR Pro supports up to 24 4K cameras and the 24-port switch leaves room to add more UniFi Protect cameras and storage as you grow. Is this kit suitable for commercial use? Yes. It's designed for commercial, industrial, and enterprise deployments with enterprise recording and managed PoE switching. Is the kit NDAA compliant? Yes. The cameras, UNVR Pro, and switch are all NDAA Section 889 compliant — suitable for government and security-sensitive sites. What's the difference between the White and Black versions? Only the camera finish differs — specs and performance are identical. Choose the finish that best blends with your building surfaces. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G6 PTZ — 4K 8MP Pan-Tilt-Zoom AI Camera (UVC-G6-PTZ) The UniFi Protect G6 PTZ is the most capable camera in the UniFi Protect ecosystem — a dual-lens 4K PTZ that pairs a wide overview lens with a telephoto lens for 10× hybrid zoom, ultra-low-latency motorised pan-tilt-zoom control, and an on-device Multi-TOPS AI engine for motion tracking. Built for large outdoor spaces, commercial sites, car parks, campuses, and high-security installations across Australia, it delivers wide-area coverage and long-range detail over a single PoE+ cable — with no monthly fees and no cloud lock-in. Available in White (UVC-G6-PTZ-W) and Black (UVC-G6-PTZ-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 4K / 8MP Zoom 10× Hybrid Protection IP66 / IK04 Power PoE+ (802.3at) Why Choose the UniFi Protect G6 PTZ? True 4K 8MP Clarity Dual 1/1.8″ 8MP CMOS sensors capture 4K UHD footage (3840 × 2160) at 30 FPS with HDR — enough detail to identify faces, read number plates, and review incidents with confidence, even at distance. 10× Hybrid Zoom, Dual-Lens A 4.46 mm wide lens for overview and a 16.3 mm telephoto lens combine for 10× hybrid zoom — pull in long-range detail across perimeters, car parks, and open ground without sacrificing situational awareness. Motorised Pan-Tilt-Zoom Ultra-low-latency PTZ control sweeps 350° pan and 100° tilt, letting you track subjects, patrol presets, and respond to alerts in real time from the UniFi Protect app or web interface. Multi-TOPS AI Engine On-camera AI detects people, vehicles, animals, faces, and number plates in real time — driving AI-assisted motion tracking and cutting false alerts, all processed on-device with no cloud dependency. 30 m IR Night Vision Built-in IR LED illumination with an IR cut filter delivers clear footage up to 30 metres in complete darkness — keeping watch around the clock without extra lighting. IP66 Weatherproof + IK04 An aluminium-alloy and polycarbonate body sealed to IP66 shrugs off rain, dust, and moisture, while IK04 impact resistance and a −30°C to 50°C range suit tough Australian outdoor conditions. Two-Way Audio A built-in microphone and speaker enable two-way audio — listen in on a scene or speak through the camera to deter intruders and assist visitors. UniFi Protect — No Subscription Manage live PTZ control, presets, AI alerts, and recordings through the UniFi Protect app or web interface — fully local, no monthly fees, no cloud lock-in. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-PTZ (White: UVC-G6-PTZ-W / Black: UVC-G6-PTZ-B) Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor Wide: 1/1.8″ 8 MP • Tele: 1/1.8″ 8 MP Lens Wide: 4.46 mm, ƒ/1.65 • Tele: 16.3 mm, ƒ/2.4 Zoom 10× hybrid (dual-lens) Field of View Wide: H 109.9° / V 56.7° / D 134.1° • Tele: H 26.6° / V 15.1° / D 30.4° Pan / Tilt Range Pan 350° • Tilt 100° Night Vision Built-in IR LED illumination + IR cut filter, up to 30 m AI / Smart Detection People, vehicles, animals, face recognition, number-plate recognition (Multi-TOPS AI Engine) Audio Two-way audio Weatherproof Rating IP66 Impact / Tamper Resistance IK04 Network Interface 10/100 MbE RJ45 Power Method PoE+ (802.3at), 42.5–57 V DC • max 24.5 W Processor Quad-core Arm® Cortex®-A53 Storage MicroSD card slot Mounting Wall, surface, ceiling, pole (included); corner, in-ceiling, pendant, conduit adapter (optional) Enclosure Aluminium alloy & polycarbonate Dimensions / Weight ⌀107.2 × 104.5 × 203.2 mm (without mount) • 1 kg Operating Temperature −30°C to 50°C, 20–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-PTZ-W) / Black (UVC-G6-PTZ-B) Downloads & Resources UVC-G6-PTZ Datasheet Ubiquiti PTZ Quick Start Guide What's in the Box UniFi Protect G6 PTZ Camera Your choice of White (UVC-G6-PTZ-W) or Black (UVC-G6-PTZ-B) finish. Mounting Kit Wall, surface, ceiling, and pole mount hardware, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE+ switch/injector and network cable are required and sold separately. Best For Commercial & Industrial Sites Warehouses, loading docks, and industrial yards where wide-area coverage and long-range zoom are essential. Car Parks & Transport Hubs Sweep large car parks and depots with motorised PTZ and AI number-plate recognition. Schools & Campuses Cover large grounds and open recreational areas with one PTZ camera replacing several fixed units. Large & Rural Properties Farm perimeters and acreage where 10× hybrid zoom and 350° pan replace multiple camera runs. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Pro Max, or Dream Wall) running UniFi Protect. Needs PoE+ (802.3at) — the G6 PTZ draws up to 24.5 W, so confirm your switch supports sufficient wattage per port before installation. Mounts to wall, surface, ceiling, or pole out of the box; corner, in-ceiling, pendant, and conduit adapters available separately. A MicroSD card slot supports optional on-camera storage. Frequently Asked Questions Does the G6 PTZ require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run the G6 PTZ? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Pro Max/Dream Wall — plus a PoE+ (802.3at) switch to power the camera, as it draws up to 24.5 W. How does the 10× zoom work? The G6 PTZ is a dual-lens camera: a wide 4.46 mm lens for overview and a 16.3 mm telephoto lens for detail. Combined, they deliver 10× hybrid zoom for long-range identification across large open areas and perimeters. Can I control the PTZ remotely? Yes. Full pan (350°), tilt (100°), zoom, and preset control is available remotely via the UniFi Protect mobile app and web interface with ultra-low latency. Is it suitable for outdoor use in Australia? Yes. IP66 weatherproofing, IK04 impact resistance, and a −30°C to 50°C range suit Australian outdoor environments including coastal, high-humidity, and high-UV areas. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-G6-PTZ-W) suits light surfaces; Black (UVC-G6-PTZ-B) suits dark surfaces and discreet installs. Is the G6 PTZ NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G6 PTZ is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect AI Pro — 4K Telephoto AI Camera with 3x Optical Zoom (UVC-AI-Pro) The UniFi Protect AI Pro (UVC-AI-Pro) is Ubiquiti's flagship AI camera — pairing a large 1/1.8″ 8MP sensor with a motorised 3x optical zoom lens and on-device AI for long-range, identity-grade surveillance. Switch between a wide 109.9° overview and a tight zoomed view to read number plates and recognise faces at distance, all over a single PoE cable with no monthly fees and no cloud lock-in. Built for indoor and outdoor use anywhere in Australia, the AI Pro ships as genuine Ubiquiti stock with fast Australia-wide delivery. SKU: UVC-AI-Pro-White. Resolution 4K / 8MP Zoom 3x Optical Night Vision IR up to 40 m Protection IP65 / IK04 Why Choose the UniFi Protect AI Pro? 3x Optical Zoom A motorised 3x optical zoom lens (F 4.1–12.3 mm) lets you pull in distant subjects without losing detail — switch from a wide 109.9° overview to a tight 34.9° zoomed view to read number plates and faces across a car park or driveway. True 4K 8MP Clarity A large 1/1.8″ 8MP CMOS sensor captures 4K UHD footage (3840 × 2160) at 30 FPS with HDR — enough detail to identify faces, read plates, and review incidents with confidence. Enhanced On-Device AI On-camera AI detects people, vehicles, and animals and supports face recognition and licence-plate recognition in real time — dramatically reducing false alerts so you act on what actually matters. Long-Range Night Vision Built-in IR LEDs illuminate up to 25 m, extending to 40 m with the Vision Enhancer, ensuring clear footage in complete darkness without extra lighting infrastructure. IP65 Weatherproof + IK04 An aluminium-alloy body sealed to IP65 handles rain and dust, while IK04 impact resistance and a −20°C to 40°C operating range keep it reliable in tough Australian conditions, indoors or out. Single-Cable PoE + Two-Way Audio One Ethernet cable delivers power and data over GbE PoE — no separate power run. Built-in two-way audio lets you listen in and talk back through the UniFi Protect app. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and camera settings through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UVC-AI-Pro (SKU: UVC-AI-Pro-White) Resolution 4K UHD — 8 MP, 3840 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS Lens F 4.1–12.3 mm • ƒ/1.53–ƒ/3.3 • 3x optical zoom Field of View Wide — H: 109.9° • V: 59.9° • D: 127.7°Zoom — H: 34.9° • V: 19.7° • D: 40° Night Vision Built-in IR LED illumination + IR cut filter • up to 25 m (40 m with Vision Enhancer) AI / Smart Detection People, vehicles, animals • face recognition • licence-plate recognition Audio Two-way audio Image Settings Colour, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay, HDR Weatherproof Rating IP65 Impact / Tamper Resistance IK04 Network Interface GbE RJ45 port Power Method PoE • 37–57 V DC • max 11 W (22 W with Vision Enhancer) Processor Quad-core Arm® Cortex®-A53 based chip Mounting Wall, ceiling, pole mount (included) • junction box, angled base (optional) Enclosure Aluminium alloy & polycarbonate Dimensions Without mount: ⌀86 × 112.6 mm • With mount: ⌀86 × 175.3 mm Weight 675 g (820 g with mount) Operating Temperature −20°C to 40°C • 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UVC-AI-Pro Datasheet Ubiquiti AI Pro Quick Start Guide What's in the Box UniFi Protect AI Pro Camera The UVC-AI-Pro 4K AI camera with motorised 3x optical zoom lens. Mounting Hardware Wall, ceiling, and pole mount hardware included, with screws and anchors. Documentation Quick-start guide and installation instructions. Not Included A PoE switch/injector and network cable are required and sold separately. The Vision Enhancer is an optional accessory for extended IR range. Best For Long Driveways & Perimeters 3x optical zoom and 40 m IR reach pull in detail at distance — ideal for long approaches and boundary lines. Car Parks & Gates Licence-plate recognition and zoomed framing capture plates at entries and exits day or night. Retail & Hospitality Identify faces at the till and entrance while on-device AI filtering cuts nuisance notifications. Offices & Warehouses Local UniFi Protect recording with no subscription — ideal for high-value commercial sites. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by GbE PoE — pair with a UniFi PoE switch for single-pane management. Mounts to wall, ceiling, or pole out of the box; junction box and angled base available separately. The optional Vision Enhancer extends IR night-vision range to 40 m. Frequently Asked Questions Does the AI Pro require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. How much optical zoom does the AI Pro have? The AI Pro has a motorised 3x optical zoom lens (F 4.1–12.3 mm), letting you switch between a wide 109.9° view and a tight 34.9° zoomed view for distant subjects. What do I need to run the AI Pro? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch or injector to power the camera over a single Ethernet cable. Is it suitable for outdoor use in Australia? Yes. IP65 weatherproofing, IK04 impact resistance, and a −20°C to 40°C range suit Australian indoor and outdoor environments. Can it read number plates and recognise faces? Yes. The AI Pro supports licence-plate recognition and face recognition alongside people, vehicle, and animal detection. How far does the night vision reach? Built-in IR reaches up to 25 m, and up to 40 m when paired with the optional Vision Enhancer accessory. Is the AI Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the AI Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect All-In-One Smart Sensor — Motion & Environmental (UP-Sense) The UniFi Protect All-In-One Smart Sensor (UP-Sense) is a compact, battery-powered multi-sensor that brings motion, entry, environmental, and safety monitoring into your UniFi Protect ecosystem over Bluetooth. A single device detects motion, door/window open-close, temperature, humidity, ambient light, garage-door tilt, alarm sounds, and water leaks — making it the ideal "swiss army knife" for smart home and business automation anywhere in Australia. Available as a Single Unit (UP-Sense) or a 3-Pack (UP-Sense-3) with water-leak adapters, with genuine Ubiquiti stock and fast Australia-wide shipping. Sensing 8-in-1 Multi-Sensor Power CR123A Battery Connectivity Bluetooth 5.0 BLE Platform UniFi Protect Why Choose the UP-Sense Smart Sensor? 8-in-1 Multi-Sensor One compact device combines a motion (PIR), magnetic entry, accelerometer, temperature, humidity, ambient light, alarm-sound, and water sensor — replacing a drawer full of single-purpose devices. Motion & Entry Detection A passive-infrared motion sensor plus a magnetic entry sensor track presence and the open/closed status of doors and windows for security and automation triggers. Environmental Monitoring Precision temperature and humidity sensors deliver real-time readings, while the ambient light sensor lets you automate lighting based on room brightness. Garage & Safety Awareness An integrated accelerometer detects garage-door tilt and position, and the alarm-sound sensor recognises standard smoke and CO detector patterns for added safety alerts. Leak Detection (3-Pack) The included water sensor adapter (3-Pack only) detects water presence at floor level — ideal for protecting against leaks under sinks, near hot-water systems, and in laundries. UniFi Protect — No Subscription Manage sensors, alerts, and automations through the UniFi Protect app or web interface — local control with no monthly fees, paired to a Bluetooth-enabled UniFi access point. Easy Battery-Powered Install Wireless over Bluetooth 5.0 and powered by an included CR123A lithium battery, with adhesive flat and corner mounts plus a magnet — no wiring or drilling required. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UP-Sense (Single Unit) / UP-Sense-3 (3-Pack) Sensors Motion (PIR), magnetic entry, accelerometer, temperature, humidity, ambient light, alarm sound, water Connectivity Bluetooth 5.0 (BLE) Antenna (1) 2.4 GHz Power CR123A lithium battery (included) LEDs Red / Blue / White Buttons (1) Factory reset Enclosure Polycarbonate Mounting Flat wall mount & corner mount (polycarbonate, adhesive) + magnet Additional Gear Water sensor adapter (3-Pack only) Dimensions ⌀24 × 83.5 mm (⌀0.9 × 3.3″) Weight 50.2 g (1.8 oz) Operating Temperature 0°C to 45°C (32°F to 113°F) Operating Humidity 10–90% non-condensing Management UniFi Protect (web & iOS / Android app) Requirements Bluetooth-supported UniFi access point or SuperLink (indoor) Certifications FCC, IC, CE, Anatel Compliance NDAA compliant Downloads & Resources UP-Sense Tech Specs UP-Sense Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UniFi Protect Smart Floodlight (UP-FloodLight) — 550 Lumen PoE Motion LED The UniFi Protect Smart Floodlight (UP-FloodLight) is a motion-activated, PoE-powered LED floodlight built for the UniFi Protect ecosystem. It pairs bright security lighting with a built-in motion sensor and full UniFi Protect integration, so a single Ethernet cable handles both power and control — no separate wiring or electrician required. Ideal for entries, driveways, car parks, and commercial frontages anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Bright Motion-Triggered Light A bright LED array with R/B/W indicators delivers strong security lighting, triggered automatically on motion or controlled manually from UniFi Protect. Single-Cable PoE One Ethernet cable carries both power and data via 48V DC PoE (12.95 W max) — pair it with any UniFi PoE switch for clean, simple installation. IPX5 Weatherproof An IPX5-rated polycarbonate and aluminium-alloy housing stands up to rain and the elements for reliable year-round outdoor use. UniFi Protect Integration Managed through the UniFi Protect web and mobile apps with Bluetooth 4.0 setup — link lighting to camera events with no monthly fees. Technical Specifications Model UP-FloodLight Networking Interface 10/100 MbE RJ45 port Power Method PoE, 48V DC, 0.27 A max Max. Power Consumption 12.95 W Weatherproofing IPX5 LEDs R / B / W Radio Bluetooth 4.0 ESD / EMP Protection Air: ±8 kV • Contact: ±8 kV Enclosure Material Polycarbonate, aluminium alloy Dimensions 135 × 65 × 50 mm (5.3 × 2.6 × 2″) Weight 216 g (without mount) • 236 g flat wall mount • 273 g angle mount Operating Temperature −10°C to 45°C, 20–80% non-condensing Software UniFi Protect (web, iOS, Android) Certifications FCC, IC, CE, Anatel Compliance NDAA compliant Downloads & Resources UP-FloodLight Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less