Wi-Fi 6

• 

  Ubiquiti Ubiquiti UniFi U6 Pro (U6-PRO) — WiFi 6 Access Point, 4x4 MU-MIMO, 5.3 Gbps

   

  UniFi WiFi 6 — NDAA Compliant Ubiquiti UniFi U6 Pro — WiFi 6 PoE Access Point, 4x4 MU-MIMO, 5.3 Gbps (U6-PRO) The Ubiquiti UniFi U6 Pro is a ceiling-mounted WiFi 6 (802.11ax) access point built for high-density environments — large offices, open-plan workspaces, retail floors, and enterprise deployments where fast, reliable wireless is non-negotiable. With 6 spatial streams, an aggregate throughput of 5.3 Gbps and support for 300+ concurrent clients, the U6 Pro is managed centrally through the UniFi Network application with no licensing fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Throughput 5.3 Gbps Standard WiFi 6 Capacity 300+ Clients Coverage 140 m² Why Choose the UniFi U6 Pro? WiFi 6 (802.11ax) Performance The latest WiFi 6 standard delivers higher speeds, lower latency, and better performance in congested environments — ideal for modern device-dense workplaces. 5.3 Gbps Aggregate Throughput 5 GHz delivers up to 4.8 Gbps over 4x4 MU-MIMO, while 2.4 GHz adds 573.5 Mbps over 2x2 — six spatial streams of combined capacity. 300+ Concurrent Clients Engineered for high-density use, the U6 Pro keeps hundreds of devices connected simultaneously without dropping performance across busy floors. 140 m² Coverage Area A single ceiling-mounted U6 Pro covers roughly 140 m² (1,500 ft²), reducing the number of APs needed across offices and open-plan spaces. Single-Cable PoE Install One GbE RJ45 port carries both power and data. Powered by any UniFi PoE switch (max 13 W) for a clean, cable-free ceiling installation. UniFi Network Managed Set up in minutes and manage centrally through the UniFi Network application — band steering, fast roaming, guest isolation, and more, with no licensing fees. IP54 Indoor/Sheltered Rating An IP54-rated polycarbonate enclosure with a stainless-steel (SUS304) mount handles dust and splashes across a wide −30°C to 60°C range. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model U6-Pro WiFi Standard WiFi 6 (802.11ax) — also 802.11a/b/g/n/ac Spatial Streams 6 Bands Dual-band (2.4 GHz + 5 GHz) Max Data Rate — 5 GHz 4.8 Gbps (4x4 DL/UL MU-MIMO, BW160) Max Data Rate — 2.4 GHz 573.5 Mbps (2x2 UL MU-MIMO, BW40) Concurrent Clients 300+ Coverage Area 140 m² (1,500 ft²) Channel Bandwidth HE/VHT 20/40/80/160 MHz Max TX Power 5 GHz: 26 dBm • 2.4 GHz: 22 dBm Antenna Gain 5 GHz: 6 dBi • 2.4 GHz: 4 dBi Networking Interface (1) GbE RJ45 port (PoE In) Power Method PoE • 44–57 V DC • max 13 W Management UniFi Network (v6.0.45+), Ethernet, Bluetooth Mounting Ceiling & wall (Pro Mount included) Enclosure / Mount Polycarbonate / Stainless steel (SUS304) Weatherproofing IP54 Dimensions / Weight ⌀197 × 35 mm • 460 g (580 g with mount) Operating Temperature −30°C to 60°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application v6.0.45 or later. Powered by any UniFi PoE switch over a single GbE cable — no separate power run required. A PoE switch/injector and network cable are not included and sold separately. Mounts to ceiling or wall out of the box with the included Pro Mount. Downloads & Resources U6 Pro Tech Specs U6 Pro Datasheet (PDF) Best For Large Offices High-density WiFi 6 for open-plan floors with hundreds of laptops, phones, and devices online at once. Retail & Hospitality Reliable guest WiFi with isolation, captive portals, and voucher authentication built in. Education & Co-working Roaming-ready coverage with 802.11r/k/v for seamless hand-off across multiple APs. Enterprise UniFi Sites Centrally managed via UniFi Network with no licensing fees — scale APs across the whole site. Frequently Asked Questions Does the U6 Pro include a PoE injector?No. The U6 Pro is powered over PoE but no injector is included. Use a UniFi PoE switch, or a compatible 48V PoE source, sold separately. How many clients can the U6 Pro handle?It supports 300+ concurrent clients, making it well suited to high-density offices, retail, and enterprise sites. What do I need to manage it?A UniFi Network host — a UniFi Cloud Gateway, Dream Machine, or Cloud Key — running UniFi Network v6.0.45 or later. There are no licensing fees. Can it be mounted on a wall?Yes. The included Pro Mount supports both ceiling and wall installation out of the box. Is the U6 Pro NDAA compliant?Yes. Ubiquiti is a US-based manufacturer and the U6 Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $279.00

• 

  Ubiquiti Ubiquiti UniFi U6 Mesh — WiFi 6 Indoor/Outdoor Access Point (U6-Mesh)

  1 review

   

  UniFi WiFi 6 — NDAA Compliant Ubiquiti UniFi U6 Mesh — WiFi 6 Indoor/Outdoor Access Point (U6-Mesh) The UniFi U6 Mesh is a sleek, high-performance WiFi 6 (802.11ax) access point built for seamless mesh coverage across homes, offices, and outdoor spaces. With 6 spatial streams, a 4x4 MU-MIMO 5 GHz radio reaching 4.8 Gbps and a 2x2 2.4 GHz radio at 573.5 Mbps, the U6 Mesh delivers fast, reliable WiFi for 250+ connected devices. Its IPX5-rated weatherproof housing lets it sit discreetly indoors or stand up to the elements outdoors anywhere in Australia. A PoE adapter is included, so it's plug-and-play in minutes — fully managed through the UniFi Network app. Genuine Ubiquiti stock with fast Australia-wide shipping. WiFi Standard WiFi 6 Throughput 5.3 Gbps Weatherproof IPX5 Power PoE (Adapter Incl.) Why Choose the UniFi U6 Mesh? High-Efficiency WiFi 6 802.11ax with OFDMA and 6 spatial streams delivers faster speeds and far better performance in busy, high-density environments compared to WiFi 5. Up to 5.3 Gbps Aggregate A 4x4 MU-MIMO 5 GHz radio (4.8 Gbps, 160 MHz) plus a 2x2 2.4 GHz radio (573.5 Mbps) keep streaming, gaming, and video calls smooth. Seamless Wireless Meshing Best-in-class signal meshing extends coverage where running cable isn't practical — ideal for filling dead zones across larger homes and sites. Indoor & Outdoor Ready An IPX5 waterproof housing and a −30°C to 60°C operating range let it run reliably outdoors through tough Australian conditions. PoE Adapter Included One Ethernet cable carries power and data (max ~13 W). The included PoE adapter means no nearby power outlet or separate injector to buy. 250+ Connected Devices Handles 250+ concurrent clients with band steering and fast roaming (802.11r/k/v) for a smooth experience as devices move around. UniFi Network Managed Fully managed through the UniFi Network app or web interface — set up in minutes with advanced controls, guest portals, and VLANs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model U6-Mesh WiFi Standard WiFi 6 (802.11ax); backward compatible 802.11a/b/g/n/ac Spatial Streams 6 MIMO 5 GHz: 4 x 4 (DL/UL MU-MIMO) • 2.4 GHz: 2 x 2 (UL MU-MIMO) Max. Data Rate 5 GHz: 4.8 Gbps (BW160) • 2.4 GHz: 573.5 Mbps (BW40) Coverage Area 140 m² (1,500 ft²) Max. Client Count 250+ Antenna Gain 5 GHz: 5 dBi • 2.4 GHz: 3 dBi Max. TX Power 5 GHz: 26 dBm • 2.4 GHz: 22 dBm Networking Interface (1) GbE RJ45 port Power Method PoE • 48V PoE adapter included Supported Voltage Range 44–57V DC Max. Power Consumption 13 W Weatherproofing IPX5 Enclosure Polycarbonate, aluminium Mounting Wall, pole (mounts included); ceiling mount optional Dimensions / Weight ⌀48.5 × 159.5 mm • 400 g Operating Temperature −30°C to 60°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Software UniFi Network 6.0.45 and later Downloads & Resources U6 Mesh Tech Specs U6 Mesh Datasheet (PDF) What's in the Box UniFi U6 Mesh Access Point The U6-Mesh WiFi 6 access point ready for indoor or outdoor mesh deployment. PoE Adapter 48V Gigabit PoE adapter included to power the access point over a single cable. Mounting Kit Wall and pole mount hardware included; ceiling mount available separately. Not Included Network cable and a UniFi Network host (Cloud Gateway / Cloud Key / Dream Machine) are required for management. Best For Homes & Apartments Extend fast WiFi 6 into bedrooms, garages, and backyards without running new cable. Outdoor Areas IPX5 weatherproofing covers patios, alfresco areas, and sheds reliably year-round. Offices & Cafes 250+ client capacity with guest portals and band steering for busy spaces. UniFi Networks Drop-in expansion for any existing UniFi deployment, fully managed in one app. Requires a UniFi Network host (Cloud Gateway, Cloud Key Gen2 Plus, or Dream Machine) running UniFi Network 6.0.45 or later. Powered by the included PoE adapter, or any UniFi PoE switch for single-pane management. Mounts to wall or pole out of the box; ceiling mount adapter available separately. Can run as a wired access point or a wireless mesh node to fill coverage gaps. Frequently Asked Questions Does the U6 Mesh include a PoE adapter? Yes. A 48V Gigabit PoE adapter is included in the box, so you can power and connect the access point with a single Ethernet cable. Can the U6 Mesh be used outdoors in Australia? Yes. Its IPX5 weatherproof housing and −30°C to 60°C operating range suit covered outdoor areas across Australian conditions. What do I need to manage the U6 Mesh? A UniFi Network host such as a Cloud Gateway, Cloud Key Gen2 Plus, or Dream Machine running UniFi Network 6.0.45 or later. Can it work as a wireless mesh node? Yes. The U6 Mesh supports wireless meshing to extend coverage where running cable isn't practical, or it can run as a standard wired AP. How many devices can it handle? 250+ concurrent clients, with band steering and fast roaming (802.11r/k/v) for a smooth experience in busy environments. Is the U6 Mesh NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the U6 Mesh is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $409.00

• 

  Ubiquiti Ubiquiti UniFi Wi-Fi 6 In-Wall Wall-mounted WiFi 6 access point with a built-in PoE switch

   

  Ubiquiti UniFi Wall-mounted WiFi 6 AP with 6 spatial streams and a built-in 4-port switch ideal for single-room coverage in hospitality environments. Features WiFi 6 6 spatial streams 115 m² (1,250 ft²) coverage 300+ connected devices Powered using PoE/PoE+* (4) GbE ports with (1) PoE output GbE uplink*PoE+ input required for single-port PoE output. Technical Specifications Mechanical Dimensions 139.7 x 96 x 31.2 mm (5.5 x 3.8 x 1.3") Weight 460 g (1 lb) Enclosure material Plastic, aluminum Mount material Aluminum Hardware Networking interface (1) Data-in: GbE RJ45 port(4) Data-out: GbE RJ45 ports Management interface EthernetBluetooth PoE interface (1) PoE in (PoE output not used)(1) PoE out (Requires a PoE+ switch) Power method PoEPoE+ (Required for PoE output) Power supply UniFi PoE switch48V, 0.5A PoE adapter (Optional) Max. power consumption 13.5W (Excluding PoE output) Max PoE wattage per port by PSE 15.4W**Requires a PoE+ switch Voltage range PoE mode 44—57V DC Max. TX power2.4 GHz5 GHz6 GHz 22 dBm26 dBm– MIMO2.4 GHz5 GHz6 GHz 2 x 2 (UL MU-MIMO)4 x 4 (DL/UL MU-MIMO)– Throughput rate2.4 GHz5 GHz6 GHz 573.5 Mbps4.8 Gbps Antenna gain2.4 GHz5 GHz6 GHz 5 dBi5.9 dBi– LED White/blue Button Factory reset Mounting Wall (Included) Ambient operating temperature -30 to 60° C (-22 to 140° F) Ambient operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g/n/ac/ax Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 300+ Zero-wait DFS Yes**Supported with upcoming firmware versions. Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Application Requirements UniFi Network Version 6.4.52 and later Downloads Installation Guide

  Read more less

   

  $419.00

• 

  Dahua Dahua SCP3044A-BZ Ultra Series Android 14 Smart Control Panel — 10.1″ IPS Video Intercom Monitor

   

  Dahua Ultra Series · Android 14 Smart Control Panel The Dahua SCP3044A-BZ is a premium 10.1-inch smart control panel that runs the latest Android 14 on an edge-to-edge IPS touchscreen. As a hybrid indoor monitor it works over IP, Wi-Fi 6 or 4-wire cabling, answers your Dahua door station, controls access and even monitors room temperature and humidity from the home screen. Proximity wake, auto-brightness and multi-colour breathing indicators make it a genuinely smart hub for modern homes and apartments. Genuine Dahua, Australian stock and local support. Operating System Android 14 Display 10.1″ IPS Touch · 1280×800 Connectivity IP · Wi-Fi 6 · 4-Wire Smart Sensors Temperature & Humidity Why Choose the Dahua SCP3044A-BZ Android 14 Performance The latest Android platform delivers a fast, app-like experience with a clean, user-friendly interface for everyday control. Edge-to-Edge 10.1″ IPS A full-screen design with ultra-narrow black border and 80° wide viewing angles both ways for a bright, premium look. Hybrid IP + 4-Wire Connect over IP, Wi-Fi or Dahua 4-wire cabling — flexible for new builds and retrofits alike. Wi-Fi 6, Bluetooth & Zigbee Dual-band Wi-Fi 6 (802.11ax), Bluetooth and reserved Zigbee 3.0 make it a future-ready smart-home hub. Effortless Interaction Proximity auto-wake, a light sensor for auto-brightness and multi-colour breathing indicators keep status clear at a glance. Built-In Climate Monitoring Onboard temperature and humidity detectors let you check room conditions straight from the home screen. See the Dahua Smart Control Panel in action Dahua Smart Control Panel Highlight Add-Ons & Accessories Compatible door stationPair the panel with a Dahua IP door station such as the DHI-VTO4202F-P-S3 modular apartment door station, then add call buttons and access modules to suit the property. PoE switchPower and connect the panel over a single network cable with the IP-COM F1106P-4-63W 4-port PoE switch. microSD storageAdd local storage for snapshots and leave-video messages with a WD Purple 128GB/256GB microSD card; the panel supports up to 512GB. Door release hardwareComplete access control with a compatible electric strike or magnetic lock plus an exit button, selected to suit your door. Need compact 7-inch and digital two-wire instead? The DHI-SCP3044A-BZ is the larger 10.1-inch model for IP, Wi-Fi 6 or analog four-wire installations. If your project needs a compact 7-inch panel or a compatible Dahua digital two-wire system, see the Dahua DHI-SCP3022A-B Android 14 2-Wire IP Smart Control Panel. Choose the Correct Smart Control Panel DHI-SCP3044A-BZ 10.1-inch 1280 × 800 panel for IP, Wi-Fi 6 or analog four-wire connectivity DHI-SCP3022A-B Compact 7-inch 1024 × 600 panel for IP, 2.4GHz Wi-Fi or digital two-wire connectivity Installation decision Confirm the specified cabling, panel size and power design before ordering; these smart panels support different wired intercom modes. Technical Specifications System & Display Operating System Android 14 Screen 10.1-inch IPS capacitive multi-touch Resolution 1280 (H) × 800 (V) Viewing Angle Up to 80° horizontal & vertical Network Protocols IPv4, RTSP, UDP, DNS, FTP, RTP, TCP, SIP Communication Full digital & analog 4-wire Audio Two-way, echo suppression & noise reduction Extensions Villa: 1 main + 9 · Apartment: 1 main + 4 Smart Sensors Temperature & humidity, light sensor, proximity wake Storage microSD up to 512GB Wireless Wi-Fi IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 6) Wi-Fi Bands 2.4 GHz & 5 GHz Bluetooth BR / EDR / BLE Zigbee Zigbee 3.0 (reserved for third-party access) Sub-1G 868–868.6 MHz Ports, Power & General Ports 1 × RS-485, 1 × USB, 1 × 10/100 Ethernet, 1 × 4-wire Alarm I/O 8 inputs / 1 output · 12V 200mA power output Power Supply 12 VDC 2A or standard PoE Power Consumption ≤ 12W standby, ≤ 15W working Casing PC + ABS, grey Installation Flush mount (bracket included) Dimensions 246.5 × 156.1 × 33.0 mm Operating Temp. -10°C to +55°C Certification CE Datasheets & Guides DHI-SCP3044A-BZ Datasheet Dahua Smart Control Panel User Manual Dahua Video Door Phone Quick Start Guide Dahua Smart Control Panel Privacy Policy Dahua Software License Agreement Dahua Open Source Software Notice Frequently Asked Questions What is the SCP3044A-BZ?A Dahua Ultra Series Android 14 smart control panel — a 10.1-inch touchscreen indoor monitor for video intercom, access and smart-home control. How does it connect?Over IP, dual-band Wi-Fi 6 or Dahua 4-wire cabling, so it suits both new installs and retrofits. Does it monitor room conditions?Yes. Built-in temperature and humidity detectors show live readings on the home screen. Can I expand to more monitors?Yes. It supports 1 main plus 9 extensions in villa mode, or 1 main plus 4 in apartment mode. How is it powered?By 12 VDC 2A or standard PoE over a single network cable. How is it mounted?Flush-mounted, with the bracket and cabling accessories included in the box. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $534.00

• Save -$9.80

  TP-Link TP-Link RE605X AX1800 Wi-Fi 6 Range Extender

   

  Extend Your Wi-Fi 6 Coverage to Every Corner of Your HomeThe TP-Link RE605X is an AX1800 Wi-Fi 6 range extender that boosts your existing wireless network to eliminate dead zones and weak signal areas. With combined speeds of up to 1800Mbps across dual bands, a built-in Gigabit Ethernet port, and support for MU-MIMO and OFDMA, it delivers faster, more reliable Wi-Fi to more devices — even in busy households. Compatible with any Wi-Fi router or access point.Key Features Wi-Fi 6 (802.11ax) — next-generation wireless technology for faster speeds and better performance in congested environments AX1800 Dual-Band Speeds — 574Mbps on 2.4GHz and 1201Mbps on 5GHz for a combined 1800Mbps 1× Gigabit Ethernet Port — connect a wired device such as a smart TV, gaming console, or NVR directly to the extender MU-MIMO and OFDMA — simultaneously serves multiple devices with less congestion and lower latency 2× External Antennas — improved signal strength and coverage compared to internal antenna designs Works with Any Router — compatible with all Wi-Fi routers and access points regardless of brand WPS One-Touch Setup — connect to your existing network in seconds with a single button press Access Point Mode — use as a standalone access point when connected via Ethernet for wired-to-wireless coverage Typical Use Cases Eliminating Wi-Fi dead zones in bedrooms, garages, or back gardens Extending Wi-Fi coverage in multi-storey homes where the router signal doesn’t reach Adding a wired Ethernet connection in a room without a wall socket via the Gigabit port Boosting Wi-Fi for smart home devices, IP cameras, or streaming devices in weak signal areas Temporary Wi-Fi extension for renovations, events, or pop-up setups Technical Specifications Specification Detail Model RE605X Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a — 5GHz; 802.11ax/n/b/g — 2.4GHz) Wi-Fi Speed AX1800: 574Mbps (2.4GHz) + 1201Mbps (5GHz) Antennas 2× External (2×2 MU-MIMO) Ethernet Port 1× Gigabit (10/100/1000Mbps) Operating Modes Range Extender, Access Point Security WPA/WPA2/WPA3, WPA2-Enterprise Buttons WPS, Reset Power Consumption 10W Dimensions (W×D×H) 73.7 × 45.7 × 124.5 mm Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the RE605X work with my existing router? Yes. The RE605X is compatible with any Wi-Fi router or access point regardless of brand. It connects to your existing network wirelessly and rebroadcasts the signal with the same or a new network name. Do I need a Wi-Fi 6 router to use the RE605X? No. The RE605X works with any Wi-Fi router, including older Wi-Fi 5 (AC) and Wi-Fi 4 (N) routers. However, to take full advantage of Wi-Fi 6 speeds and features, a Wi-Fi 6 router is recommended. Can I use the RE605X as an access point? Yes. When connected to a router or switch via the Gigabit Ethernet port, the RE605X can operate in Access Point mode, providing wireless coverage from a wired connection. Where is the best place to position the RE605X? For best results, place the RE605X halfway between your router and the area with weak signal — ideally where it can still receive a strong signal from the router (at least 2–3 bars). Avoid placing it behind large appliances or thick concrete walls. Does the RE605X support WPA3 security? Yes. The RE605X supports WPA3 encryption, providing the latest wireless security standard for compatible devices.

  Read more less

   

  $128.80 $119.00

• 

  Ubiquiti Ubiquiti U7 Pro UniFi WiFi 7 Access Point — 6 GHz, 2.5 GbE, PoE+ Ceiling AP (U7-Pro)

   

  UniFi — NDAA Compliant Ubiquiti U7 Pro — UniFi WiFi 7 Access Point (U7-Pro) The Ubiquiti U7 Pro is a flagship ceiling-mounted WiFi 7 access point built for high-density, large-scale environments. With 6 spatial streams, tri-band radios including 6 GHz, a 2.5 GbE uplink, and PoE+ power over a single cable, it delivers interference-free wireless to 300+ connected devices across up to 140 m². Ideal for offices, retail, warehouses, schools, and homes anywhere in Australia — managed locally through UniFi Network with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Standard WiFi 7 / 6 GHz Uplink 2.5 GbE Coverage 140 m² Clients 300+ Why Choose the Ubiquiti U7 Pro? WiFi 7 with 6 GHz Tri-band 802.11be (WiFi 7) with a dedicated 6 GHz band delivers wider channels, lower latency, and interference-free throughput for the most demanding wireless deployments. 6 Spatial Streams Six spatial streams across three radios (2×2 MIMO per band) maximise aggregate capacity, keeping performance high even when hundreds of clients connect at once. 2.5 GbE Uplink A built-in 2.5 GbE RJ45 port removes the gigabit bottleneck, letting the U7 Pro deliver its full multi-gig wireless throughput to your wired network. 300+ Connected Devices Engineered for high density — comfortably supports 300+ concurrent clients across up to 140 m², ideal for busy offices, retail floors, and venues. Single-Cable PoE+ Power Powered by PoE+ (max 21 W) over one Ethernet run — no separate power supply or electrician needed. Pairs perfectly with any UniFi PoE switch. UniFi Network — No Subscription Manage SSIDs, VLANs, roaming, and guest portals from the UniFi Network app or web console. Runs locally on your UniFi gateway with no monthly fees. Fast Roaming & Advanced WiFi 802.11r fast roaming, 802.11k/v, band steering, wireless meshing, and PPSK keep clients connected seamlessly as they move across your site. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model U7-Pro WiFi Standard WiFi 7 (802.11a/b/g/n/ac/ax/be) Spatial Streams 6 — 2×2 MIMO per band (2.4 / 5 / 6 GHz) Coverage Area 140 m² (1,500 ft²) Max. Client Count 300+ concurrent clients Max. Data Rate 6 GHz: 5.8 Gbps (BW320) • 5 GHz: 4.3 Gbps (BW240) • 2.4 GHz: 688 Mbps (BW40) Max. TX Power 6 GHz: 23 dBm • 5 GHz: 26 dBm • 2.4 GHz: 23 dBm Antenna Gain 6 GHz: 5.8 dBi • 5 GHz: 6 dBi • 2.4 GHz: 4 dBi Networking Interface (1) 1/2.5 GbE RJ45 port Power Method PoE+ • 44–57 V DC • max 21 W Max. BSSIDs 8 per radio Wireless Security WPA / WPA2 / WPA3 / PPSK, WPA-Enterprise Mounting Ceiling & wall (Pro Mount included) Enclosure Polycarbonate, metal • mount: SUS304 / SGCC steel Dimensions / Weight ⌀206 × 46 mm • 680 g Operating Temperature −30°C to 40°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Application UniFi Network 8.0.28 and later Downloads & Resources U7 Pro Datasheet U7 Pro Installation Guide What's in the Box U7 Pro Access Point Genuine Ubiquiti UniFi WiFi 7 ceiling AP (U7-Pro). Pro Mount Kit Ceiling & wall mounting hardware with screws and anchors included. Documentation Quick-start guide and installation instructions. Not Included A PoE+ switch/injector and network cable are required and sold separately. Best For Offices & Coworking High-density WiFi 7 capacity for hundreds of laptops, phones, and video calls without congestion. Retail & Hospitality Fast guest WiFi with captive portals, vouchers, and seamless roaming across the floor. Warehouses & Schools Wide 140 m² coverage and 6 GHz throughput for IoT, scanners, and classroom devices. Homes & Apartments Future-proof WiFi 7 and multi-gig 2.5 GbE backhaul for high-speed home networks. Requires a UniFi gateway or Cloud Key running UniFi Network 8.0.28 or later for adoption and management. Powered by any PoE+ (802.3at) switch — pair with a UniFi PoE switch for single-pane management. Mounts to ceiling or wall out of the box using the included Pro Mount. Use the 2.5 GbE uplink with a multi-gig switch port to unlock full WiFi 7 throughput. Frequently Asked Questions Does the U7 Pro need a subscription? No. UniFi Network runs locally on a UniFi gateway or Cloud Key. There are no monthly fees or cloud subscriptions. What do I need to run the U7 Pro? A UniFi gateway or Cloud Key running UniFi Network 8.0.28+, plus a PoE+ switch to power the access point. Does it support the 6 GHz band? Yes. The U7 Pro is a tri-band WiFi 7 AP with dedicated 2.4 GHz, 5 GHz, and 6 GHz radios for maximum capacity and low interference. How many devices can it handle? It is engineered for high density and comfortably supports 300+ concurrent clients across up to 140 m². What uplink and power does it use? A single 2.5 GbE RJ45 port carries both data and PoE+ power (max 21 W) over one Ethernet cable. Is the U7 Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the U7 Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $319.00

• Save -$20.00

  TP-Link TP-Link EAP670 AX5400 Ceiling Mount Wi-Fi 6 Access Point

   

  High-Density Wi-Fi 6 for Commercial and Enterprise Wireless NetworksThe TP-Link EAP670 is an AX5400 Wi-Fi 6 ceiling mount access point designed for high-density commercial environments including offices, hotels, schools, and retail spaces. With combined speeds of up to 5378Mbps across dual bands, a 2.5 Gigabit uplink port, and full Omada SDN integration, it delivers fast, reliable wireless coverage for large numbers of concurrent users — managed centrally via the Omada app or cloud controller.Key Features AX5400 Wi-Fi 6 (802.11ax) — 574Mbps on 2.4GHz and 4804Mbps on 5GHz for a combined 5378Mbps HE160 Channel Support — doubles peak throughput on a single stream for demanding high-bandwidth applications 2.5 Gigabit Uplink Port — eliminates the uplink bottleneck in high-density deployments PoE+ Powered (802.3at) — single Ethernet cable carries both data and power; DC adapter also included for non-PoE installations Omada SDN Integration — Zero-Touch Provisioning, centralised cloud management, and intelligent monitoring via Omada app or web controller Seamless Roaming — voice calls and video streams remain uninterrupted as users move between access points Omada Mesh — wireless backhaul between EAPs for flexible deployment without additional cabling Internal Omni Antennas — 2× 4dBi (2.4GHz) and 4× 5dBi (5GHz) for broad, even coverage Ceiling and Wall Mountable — mounting kits included for both installation types 5-Year Warranty Typical Use Cases High-density office Wi-Fi with many concurrent users and devices Hotel guest Wi-Fi with seamless roaming between floors and rooms School and university campus wireless networks managed via Omada SDN Retail and hospitality venues requiring reliable, fast wireless coverage Warehouse and industrial Wi-Fi for mobile devices and barcode scanners Multi-AP deployments with centralised management and Zero-Touch Provisioning Technical Specifications Specification Detail Model EAP670 Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a — 5GHz; 802.11ax/n/b/g — 2.4GHz) Wi-Fi Speed AX5400: 574Mbps (2.4GHz) + 4804Mbps (5GHz) Channel Width HE160 on 5GHz Uplink Port 1× 2.5 Gigabit RJ45 (supports 802.3at PoE+) Antennas Internal: 2× 4dBi (2.4GHz), 4× 5dBi (5GHz) Power Supply 802.3at PoE+ or 12V/1.5A DC (adapter included) Power Consumption Max 19.8W Mounting Ceiling or wall (kits included) Dimensions (W×D×H) 243 × 243 × 64 mm Management Omada SDN (cloud/software/hardware controller), Omada App, standalone web UI Certifications CE, FCC, RoHS Warranty 5 Years Frequently Asked Questions Does the EAP670 require an Omada controller? No. The EAP670 can be managed as a standalone access point via its built-in web interface without any controller. An Omada controller (software, cloud, or hardware OC200/OC300) is optional and enables centralised management of multiple EAPs across one or more sites. Why does the EAP670 have a 2.5 Gigabit uplink port? The 2.5G uplink prevents the network port from becoming a bottleneck in high-density deployments where many users are simultaneously transferring data. To take advantage of 2.5G speeds, your PoE switch or injector must also support 2.5GbE. Standard Gigabit switches will negotiate to 1Gbps. Can I power the EAP670 without a PoE switch? Yes. A 12V/1.5A DC power adapter is included in the box, allowing installation in locations without a PoE switch. Alternatively, a TP-Link PoE injector (such as the TL-POE160S) can be used to power the EAP670 via a standard Ethernet cable. What is Omada Mesh and when should I use it? Omada Mesh allows EAP670 units to connect to each other wirelessly, eliminating the need to run Ethernet cable to every access point. It is useful for extending coverage to areas where cabling is impractical, though a wired backhaul always provides better performance and reliability. How many users can the EAP670 support simultaneously? The EAP670 supports MU-MIMO and OFDMA, which allow it to communicate with multiple devices simultaneously. Practical capacity depends on the applications in use, but it is well-suited to high-density environments with 50–100+ concurrent users per AP.

  Read more less

   

  $299.00 $279.00

• Save -$19.70

  TP-Link TP-Link Deco X20 AX1800 Mesh Wi-Fi 6 System – 1-Pack | Up to 200m² Coverage

   

  TP-Link Deco X20 AX1800 Mesh Wi-Fi 6 System – 1-Pack | Up to 200m² Coverage Overview The TP-Link Deco X20 brings the speed and efficiency of Wi-Fi 6 (802.11ax) to your whole-home mesh network. A single unit covers up to 200m² with combined speeds of up to 1,800Mbps — 1,201Mbps on 5GHz and 574Mbps on 2.4GHz. Powered by a Qualcomm quad-core processor and featuring OFDMA, MU-MIMO, and BSS Color technology, it handles more devices simultaneously with lower latency than previous Wi-Fi generations. WPA3 security, TP-Link HomeCareTM parental controls, antivirus, and QoS are built in. Multiple Deco X20 units work together as one seamless network, with auto-roaming, self-healing, and optional Ethernet backhaul for maximum reliability. Key Features Wi-Fi 6 (AX1800) – Next-generation 802.11ax standard delivering up to 1,201Mbps on 5GHz and 574Mbps on 2.4GHz for faster, more efficient wireless performance. OFDMA & MU-MIMO – Quadruples network capacity by enabling simultaneous data transmission to multiple devices; ideal for busy households with many connected devices. Up to 200m² Coverage Per Unit – One Deco X20 covers up to 200m²; add more units to extend coverage across larger homes. Ultra-Low Latency – Wi-Fi 6 efficiency improvements significantly reduce latency for more responsive gaming, video calls, and real-time applications. Seamless Whole-Home Mesh – Multiple units form one unified network; devices auto-roam to the strongest Deco as you move through your home. WPA3 Security – Latest Wi-Fi security standard for stronger encryption and protection against brute-force attacks. TP-Link HomeCare™ – Built-in parental controls, antivirus protection, and Quality of Service (QoS) for a safer, more controlled online experience. Qualcomm Quad-Core CPU – 1GHz quad-core processor handles demanding multi-device workloads without slowdown. Optional Ethernet Backhaul – Connect Deco units via Ethernet for faster, more reliable inter-unit communication. Router & Access Point Modes – Flexible deployment as a standalone router or as an access point within an existing network. BSS Color, Band Steering & AP Steering – Advanced Wi-Fi 6 features that reduce interference and ensure devices connect to the optimal band and unit automatically. Use Cases Homes with 10+ connected devices requiring fast, reliable whole-home Wi-Fi 4K/8K streaming, online gaming, and video conferencing households Smart home environments with many IoT devices Upgrading from Wi-Fi 5 (AC) to Wi-Fi 6 (AX) for future-proofed performance Multi-storey homes or properties with dead zones needing seamless mesh coverage Home offices requiring low-latency, high-reliability wireless connectivity Technical Specifications Specification Details Model Deco X20 (1-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/a/g/b) 5GHz Speed Up to 1,201Mbps 2.4GHz Speed Up to 574Mbps Coverage (1-Pack) Up to 200m² Processor Qualcomm 1GHz Quad-Core CPU Antennas 4 × Internal Antennas Ethernet Ports 2 × Gigabit LAN/WAN Wi-Fi Technologies OFDMA, MU-MIMO, 1024-QAM, BSS Color, Beamforming, Band Steering, AP Steering Security WPA3, WPA2-PSK, WPA-PSK, SPI Firewall Operating Modes Router / Access Point Backhaul Wireless or Ethernet (Optional) WAN Types Dynamic IP / Static IP / PPPoE IPv6 Supported App Deco App (iOS & Android) Dimensions Φ110 × 114mm Frequently Asked Questions Do I need Wi-Fi 6 devices to benefit from the Deco X20? No. The Deco X20 is fully backwards-compatible with Wi-Fi 5 (AC), Wi-Fi 4 (N), and older devices. However, the full benefits of Wi-Fi 6 — including OFDMA efficiency, lower latency, and higher speeds — are realised when connecting Wi-Fi 6-capable devices such as recent iPhones, Android phones, laptops, and smart TVs. How does the Deco X20 compare to the Deco M4? The Deco X20 uses Wi-Fi 6 (AX1800) with OFDMA, MU-MIMO, WPA3, and a quad-core processor — delivering significantly higher speeds, lower latency, and better performance in device-dense environments. The Deco M4 uses Wi-Fi 5 (AC1200) and is a more budget-friendly option for smaller homes with fewer devices. If you have 10+ devices or Wi-Fi 6-capable hardware, the X20 is the better long-term investment. Is the Deco X20 compatible with Australian NBN connections? Yes. The Deco X20 supports Dynamic IP, Static IP, and PPPoE WAN types, covering all major Australian NBN connection types (FTTC, FTTN, FTTB, HFC, FTTP). Its Gigabit Ethernet ports support NBN plans up to 1Gbps. Check with your ISP for any specific VLAN or PPPoE configuration requirements. What is OFDMA and why does it matter? OFDMA (Orthogonal Frequency Division Multiple Access) is a Wi-Fi 6 technology that allows the router to serve multiple devices simultaneously within a single transmission, rather than one at a time. This dramatically improves efficiency and reduces latency in environments with many connected devices — such as smart homes, home offices, and households with streaming, gaming, and IoT devices all running at once. Can I mix Deco X20 units with other Deco models? Yes. The Deco X20 is compatible with other Deco models, allowing you to mix units in a single mesh network. Note that the network will operate at the capabilities of the lowest-spec unit in the mesh for inter-unit communication. Does the Deco X20 include HomeCare security features? Yes. TP-Link HomeCare™ is built in and includes parental controls (content filtering and time scheduling), antivirus protection powered by Trend Micro, and Quality of Service (QoS) for prioritising bandwidth to specific devices or applications. A HomeCare subscription may be required for ongoing antivirus updates — check the Deco app for current subscription details. NBN Tip: The Deco X20 includes Gigabit Ethernet ports, making it suitable for NBN plans up to 1Gbps. For multi-unit mesh setups, using Ethernet backhaul between Deco units will deliver the fastest and most reliable inter-unit performance — particularly important on high-speed NBN plans.

  Read more less

   

  $158.70 $139.00

• 

  TP-Link TP-Link Archer AX72 Pro AX5400 Multi-Gigabit Wi-Fi 6 Router

   

  TP-Link Archer AX72 Pro — AX5400 Multi-Gigabit Wi-Fi 6 Router The TP-Link Archer AX72 Pro is a high-performance AX5400 Wi-Fi 6 router built for homes and small offices that demand fast, reliable wireless connectivity across a large number of devices. With a 2.5 Gbps multi-gigabit port, 4T4R HE160 on the 5 GHz band, support for 100+ simultaneous devices, and TP-Link HomeShield security, it delivers the speed, coverage, and control needed for 8K streaming, online gaming, remote work, and smart home environments across Australia. Key Features AX5400 Wi-Fi 6 Speeds: Up to 5400 Mbps combined — 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz — for fast browsing, streaming, and downloading simultaneously. 4T4R + HE160 on 5 GHz: Full 4-stream, 160 MHz channel width configuration on the 5 GHz band enables ultra-fast connections up to 4.8 Gbps for compatible devices. 2.5 Gbps Multi-Gigabit Port: A 2.5 Gbps WAN/LAN port breaks through the 1G bottleneck, making full use of high-speed NBN and fibre connections. Configurable as WAN or LAN for network flexibility. Connect 100+ Devices: MU-MIMO and OFDMA technology reduce network congestion and quadruple average throughput, keeping every device fast even in busy households. Extensive Coverage: 6 high-gain antennas, Beamforming, High-Power FEM, and 4T4R combine to push Wi-Fi signal further and more reliably throughout your home. EasyMesh Compatible: Pair with any EasyMesh-compatible TP-Link router or access point to create a seamless whole-home mesh Wi-Fi network. TP-Link HomeShield: Built-in network security with IoT device protection, real-time threat detection, parental controls, and new device connection notifications. VPN Client & Server: Built-in VPN support allows remote access to home network devices (NAS, cameras, printers) and secure cross-regional browsing from connected devices. USB 3.0 Port: Share files across your network or set up a private cloud by connecting an external USB drive directly to the router. Parental Controls: Block inappropriate content and set time limits for individual devices to encourage healthier online habits for children. Easy Setup: Configure in minutes via the Tether app (iOS & Android) or the full-featured web management interface. OTA firmware updates keep the router current automatically. Improved Thermal Design: Enlarged ventilation area dissipates heat more effectively for sustained peak performance under load. Use Cases High-Speed NBN & Fibre Homes: The 2.5 Gbps port ensures you’re not bottlenecked by a 1G WAN connection — ideal for NBN 1000 and full-fibre services. 8K Streaming & Gaming Households: AX5400 speeds and OFDMA keep multiple 4K/8K streams and online gaming sessions running smoothly at the same time. Smart Home Environments: MU-MIMO and 100+ device support handle the growing number of IoT devices, smart speakers, cameras, and appliances without degrading performance. Remote Work & Home Office: Built-in VPN client/server and stable Wi-Fi 6 connectivity support secure remote access and reliable video conferencing. Large Homes & Multi-Room Coverage: EasyMesh compatibility allows the AX72 Pro to act as the backbone of a whole-home mesh system, eliminating dead zones. Families with Children: HomeShield parental controls and content filtering provide a safer online environment for kids across all connected devices. Specifications Model Archer AX72 Pro Wi-Fi Standard Wi-Fi 6 (802.11ax) Wi-Fi Speed AX5400 — 574 Mbps (2.4 GHz) + 4804 Mbps (5 GHz) 5 GHz Configuration 4T4R, HE160, up to 4.8 Gbps Antennas 6 × Fixed High-Gain Antennas Multi-Gigabit Port 1 × 2.5 Gbps WAN/LAN (configurable) Gigabit Ports 1 × Gigabit WAN, 3 × Gigabit LAN USB 1 × USB 3.0 Device Capacity 100+ simultaneous devices MU-MIMO Yes (4×4) OFDMA Yes (Uplink & Downlink) Beamforming Yes EasyMesh Yes VPN VPN Client & VPN Server Security TP-Link HomeShield (IoT protection, threat detection, parental controls) App Management TP-Link Tether (iOS & Android) Firmware Updates OTA (automatic or manual) Weight 1.54 kg Certifications CE, FCC, RoHS Frequently Asked Questions Does the Archer AX72 Pro support NBN 1000? Yes. The 2.5 Gbps multi-gigabit WAN/LAN port allows the AX72 Pro to fully utilise high-speed NBN 1000 and full-fibre connections without the 1 Gbps bottleneck found on standard routers. You’ll need a compatible modem or ONT that also supports 2.5 Gbps output to take full advantage. What is the difference between the AX72 Pro and the standard AX72? The key upgrade on the AX72 Pro is the addition of a 2.5 Gbps multi-gigabit port, which can be configured as either WAN or LAN. This makes it significantly better suited to high-speed internet connections and NAS or server connectivity compared to the standard AX72, which is limited to 1 Gbps ports. Can I use the AX72 Pro in a mesh network? Yes. The AX72 Pro is EasyMesh compatible and can be paired with other EasyMesh-compatible TP-Link routers or access points to create a seamless whole-home mesh Wi-Fi network with a single SSID and automatic device roaming. Does HomeShield require a subscription? Basic HomeShield features — including network security scanning and parental controls — are available for free. Advanced features such as real-time IoT protection, detailed reports, and enhanced threat intelligence require a HomeShield Pro subscription. How do I set up the Archer AX72 Pro? Setup takes just a few minutes using the free TP-Link Tether app on iOS or Android. Alternatively, you can configure the router via the web management interface at tplinkwifi.net. OTA firmware updates can be enabled to keep the router automatically up to date. Does the AX72 Pro support VPN? Yes. It supports both VPN Client mode (allowing devices on your network to route traffic through a VPN server) and VPN Server mode (allowing external devices to securely access your home network, including NAS drives, cameras, and printers). Is the USB port suitable for NAS storage? The USB 3.0 port supports file sharing across your local network and can be used to create a basic private cloud accessible remotely. For a dedicated NAS experience with advanced features, a standalone NAS device is recommended — but for simple shared storage, the USB port works well. Downloads 📄 Archer AX72 Pro Datasheet (PDF)

  Read more less

   

  $269.00

• Save -$17.91

  Ubiquiti Ubiquiti UniFi Switch Enterprise 24 PoE (USW-Enterprise-24-PoE) — 12x 2.5GbE + 12x 1GbE PoE+, 2x 10G SFP+ Managed Layer 3

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Enterprise 24 PoE — 12x 2.5GbE + 12x 1GbE PoE+, 2x 10G SFP+, Managed Layer 3 (USW-Enterprise-24-PoE) The UniFi Switch Enterprise 24 PoE is a managed Layer 3 switch built for high-density Wi-Fi 6 deployments and modern multi-gig networks. It delivers (12) 2.5GbE PoE+ ports for next-generation access points, (12) Gigabit PoE+ ports, and (2) 10G SFP+ uplinks for fibre backhaul — all driven by a 400W PoE budget. With a 1.3″ touchscreen, single-row RJ45 layout for clean patch-panel cabling, and full UniFi Network management, it is ideal for offices, campuses, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x PoE+ RJ45 PoE Budget 400W Multi-Gig 12x 2.5GbE Uplinks 2x 10G SFP+ Why Choose the UniFi Switch Enterprise 24 PoE? Built for Wi-Fi 6 & Multi-Gig Twelve 2.5GbE PoE+ ports deliver the bandwidth and power modern Wi-Fi 6 access points demand, eliminating the Gigabit bottleneck on high-throughput links. 24 PoE+ Ports, 400W Budget Every RJ45 port supports 802.3af/at PoE+ up to 34.2W per port, with a 400W total PoE capacity to power APs, cameras, and phones over a single cable. 10G SFP+ Fibre Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC uplinks to your core network, preventing congestion as your deployment scales. Managed Layer 3 Switching Full Layer 3 routing, VLANs, and inter-VLAN routing managed through the UniFi Network application — enterprise control with a clean, intuitive interface. 1.3″ Touchscreen Display An onboard 1.3″ touchscreen with AR switch management shows port status, throughput, and PoE usage at a glance — no laptop needed on site. Single-Row RJ45 Layout A single-row port design keeps patch-panel cabling tidy and straightforward, simplifying installation and ongoing maintenance in the rack. Redundant Power Support UniFi SmartPower Redundant Power System (USP-RPS) DC input protects against internal PSU interruption or failure for mission-critical uptime. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Enterprise-24-PoE Switch Type Managed Layer 3 PoE Gigabit Ethernet Switch 2.5G Ports (12) 100/1000/2500 Mbps RJ45 with 802.3af/at PoE+ Gigabit Ports (12) 10/100/1000 Mbps RJ45 with 802.3af/at PoE+ SFP+ Ports (2) 1/10G SFP+ Total PoE Capacity 400W Max PoE+ per Port (PSE) 34.2W PoE Standards IEEE 802.3af/at PoE+ (Pins 1, 2+; 3, 6-) Total Non-Blocking Throughput 62 Gbps Switching Capacity 124 Gbps Forwarding Rate 92.25 Mpps Display 1.3″ touchscreen with AR switch management Power Method (1) Universal AC: 100–240VAC, 8.5A Max, 50/60 Hz Redundant Power (1) USP-RPS DC input: 52VDC, 7.7A; 11.5VDC, 8.7A Power Supply AC/DC, Internal, 550W Max Power Consumption 550W Voltage Range (802.3af) 44 to 57V Voltage Range (802.3at) 50 to 57V ESD/EMP Protection Air: ±16 kV, Contact: ±12 kV Enclosure / Mount SGCC Steel Dimensions 442.4 × 43.7 × 325 mm (17.4 × 1.7 × 12.8″) Weight 5.11 kg (without mount) / 5.2 kg (with mount) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–95% non-condensing Management UniFi Network application (v5.14.12 or higher) Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Enterprise-24-PoE Datasheet Ubiquiti Quick Start Guide Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports unlock the full throughput of high-density Wi-Fi 6 access points. Offices & Campuses Managed Layer 3 routing, VLANs, and 400W PoE for multi-floor business networks. Retail & Hospitality Power APs, cameras, and VoIP phones over a single cable with clean rack cabling. Surveillance Networks 10G SFP+ uplinks and PoE+ ports keep camera and NVR traffic flowing without bottlenecks. Managed through the UniFi Network application — pair with a UniFi gateway, Cloud Key, or Dream Machine for full control. Standard 1U rack-mount form factor; mounting hardware included (SGCC steel). Use 10G SFP+ ports for fibre or DAC uplinks to your core switch or gateway. Add a USP-RPS unit for redundant DC power on mission-critical sites. Frequently Asked Questions What is the total PoE budget of this switch? The USW-Enterprise-24-PoE provides a 400W total PoE capacity across all 24 PoE+ ports, with up to 34.2W per port (802.3af/at). Which ports support 2.5GbE? Twelve of the RJ45 ports support 100/1000/2500 Mbps with PoE+, ideal for Wi-Fi 6 access points. The other twelve are Gigabit PoE+ ports. Is this a Layer 3 managed switch? Yes. It is a managed Layer 3 switch supporting VLANs and inter-VLAN routing, configured through the UniFi Network application. What do I need to manage it? A UniFi Network host such as a UniFi gateway, Cloud Key Gen2 Plus, or Dream Machine Pro/SE running UniFi Network v5.14.12 or higher. Does it support redundant power? Yes. It includes a USP-RPS DC input for UniFi SmartPower redundancy, protecting against internal PSU failure. Is the switch NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,524.90 $1,506.99

• Save -$30.40

  Ubiquiti Ubiquiti UniFi Switch Enterprise 8 PoE — 8x 2.5GbE PoE+ Layer 3 Managed Switch (USW-Enterprise-8-PoE)

   

  UniFi Switching — NDAA Compliant UniFi Switch Enterprise 8 PoE — 8x 2.5GbE PoE+ Layer 3 Managed Switch (USW-Enterprise-8-PoE) The UniFi Switch Enterprise 8 PoE is a fully managed Layer 3 switch built for high-bandwidth networks — pairing eight 2.5GbE 802.3at PoE+ RJ45 ports with two 10G SFP+ uplinks to power and connect Wi-Fi 6 access points, cameras, and workstations without bottlenecks. A 1.3″ LCM colour touchscreen with AR switch management makes setup and monitoring effortless, while the powerful UniFi Network application gives you full control from anywhere. Wall-mountable with the included kit and backed by genuine Ubiquiti stock with fast Australia-wide shipping, it's the ideal compact backbone for homes, offices, and commercial sites across Australia. PoE+ Ports 8x 2.5GbE PoE Budget 120 W Total Uplinks 2x 10G SFP+ Management Layer 3 Touchscreen Why Choose the UniFi Switch Enterprise 8 PoE? 8x 2.5GbE PoE+ Ports Eight 2.5GbE 802.3at PoE+ RJ45 ports deliver power and multi-gig data over a single cable — ideal for next-generation Wi-Fi 6 access points, cameras, and high-throughput devices that exceed standard gigabit. Dual 10G SFP+ Uplinks Two 10G SFP+ ports provide fast, non-blocking uplinks to your core network or other switches, keeping aggregated traffic flowing smoothly across busy sites. 120 W Total PoE Supply A 120 W PoE budget powers your connected access points, cameras, and IoT devices directly from the switch — no separate injectors or power runs required. 1.3″ LCM Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management displays key system and connection insights at a glance and simplifies setup right at the rack. Fully Managed Layer 3 A fully managed Layer 3 switch configured through the intuitive UniFi Network web application and mobile app — monitor, segment, and route traffic from anywhere. Wall-Mountable Design Ships with a wall-mount kit for flexible, space-saving deployment in offices, comms cupboards, and tight installs where a full rack isn't practical. UniFi Network Integration Managed alongside the rest of your UniFi gear through a single pane of glass — requires the UniFi Network application version 6.3.51 or later. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Enterprise-8-PoE (Switch Enterprise 8 PoE) Switching Layer Fully managed, Layer 3 PoE RJ45 Ports (8) 2.5GbE, 802.3at PoE+ SFP+ Ports (2) 10G SFP+ (uplinks) Total PoE Supply 120 W Display 1.3″ LCM colour touchscreen with AR switch management Mounting Wall-mountable (kit included) Management UniFi Network web application & mobile app Software Requirement UniFi Network application version 6.3.51 and later Compliance NDAA compliant Downloads & Resources USW-Enterprise-8-PoE Datasheet Installation Guide What's in the Box UniFi Switch Enterprise 8 PoE The USW-Enterprise-8-PoE Layer 3 managed switch. Wall-Mount Kit Mounting hardware for flexible wall installation. Documentation Quick-start guide and installation instructions. Not Included SFP+ transceivers, fibre/network cabling, and a UniFi host controller are sold separately. Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports feed next-gen Wi-Fi 6 access points without throttling their throughput. Offices & Comms Cupboards Wall-mountable footprint and touchscreen setup suit space-constrained installs. Camera & IoT Backbones 120 W PoE budget powers cameras and IoT devices directly from one managed switch. High-Bandwidth Networks Dual 10G SFP+ uplinks aggregate traffic for busy, multi-device commercial sites. Managed with the UniFi Network application version 6.3.51 or later via web or mobile app. Eight 2.5GbE 802.3at PoE+ ports share a 120 W total PoE budget across connected devices. Use the two 10G SFP+ ports for high-speed uplinks to your core network or other switches. Mounts to a wall out of the box using the included mounting kit. Frequently Asked Questions How many devices can the Enterprise 8 PoE power? It has eight 2.5GbE 802.3at PoE+ ports sharing a 120 W total PoE budget — enough to power multiple Wi-Fi 6 access points, cameras, or IoT devices depending on each device's draw. What are the 10G SFP+ ports for? The two 10G SFP+ ports are high-speed uplinks used to connect the switch to your core network or to other switches. SFP+ transceivers are sold separately. Do I need a controller to manage it? Yes. The switch is managed through the UniFi Network application (version 6.3.51 or later) via the web interface or mobile app, hosted on a UniFi console such as a Cloud Key, Dream Machine, or self-hosted controller. Can it be wall-mounted? Yes. The switch is wall-mountable and ships with the required mounting kit, making it ideal for offices and comms cupboards. Is the Enterprise 8 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $939.00 $908.60

• Save -$143.85

  TP-Link TP-Link TL-SG108-M2 8-Port 2.5G Multi-Gigabit Desktop Switch

   

  TP-Link TL-SG108-M2 8-Port 2.5G Multi-Gigabit Desktop Switch Unlock 2.5G Speeds Over Your Existing Cat5e Cabling The TP-Link TL-SG108-M2 delivers 8 ports of 2.5 Gbps connectivity with 40 Gbps total switching capacity — all over your existing Cat5e cabling. No rewiring required. Its fanless metal chassis sits on a desktop or mounts on a wall, making it a quiet, flexible upgrade for home offices, LAN setups, small businesses, and anyone whose network has outgrown standard Gigabit speeds. Plug in and go — no configuration or software required. Key Features 8 × 100 Mbps / 1 Gbps / 2.5 Gbps auto-negotiation RJ45 ports — backward compatible with existing Gigabit devices 40 Gbps switching capacity with 29.8 Mpps packet forwarding rate Works on existing Cat5e cabling — upgrade to 2.5G without rewiring 10K Jumbo Frame support for high-throughput large file transfers 802.1p / DSCP QoS for prioritising latency-sensitive traffic IEEE 802.3x flow control for reliable, congestion-free data transfer 16K MAC address table with 1.5 Mb packet buffer memory Store-and-forward switching for error-free packet delivery Fanless design — completely silent operation, ideal for home and office environments Durable metal casing with desktop and wall-mount support Plug-and-play — no configuration or software required Use Cases Wi-Fi 6 Access Points: Connect Wi-Fi 6 APs at full 2.5G uplink speed to eliminate the Gigabit bottleneck and unlock true AX-class wireless performance. NAS & Storage: Maximise throughput to a 2.5G NAS for fast local file transfers, backups, and media streaming. LAN Gaming: Low-latency, high-bandwidth wired connections for competitive gaming setups and LAN parties. Home Entertainment: 4K video streaming, media servers, and smart home hubs all benefit from the extra headroom of 2.5G. Small Office Networks: Multiple users transferring large files simultaneously without congestion on a shared switch. Network Upgrades: Step up from Gigabit without replacing Cat5e cabling infrastructure — a cost-effective performance upgrade. Specifications Specification Detail Model TL-SG108-M2 Ports 8 × 100 Mbps / 1 Gbps / 2.5 Gbps RJ45 (Auto-Negotiation, Auto MDI/MDIX) Standards IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1p, 802.3bz Switching Capacity 40 Gbps Packet Forwarding Rate 29.8 Mpps MAC Address Table 16K Packet Buffer Memory 1.5 Mb Jumbo Frame 10 KB QoS 802.1p / DSCP Flow Control IEEE 802.3x Transfer Method Store-and-Forward Cooling Fanless (silent) Power Supply External adapter — 12 V DC / 1.5 A Max Power Consumption 15.65 W Mounting Desktop or wall-mount Casing Metal Dimensions (W × D × H) 226 × 131 × 35 mm Operating Temperature 0°C – 40°C Certifications CE, FCC, RoHS Weight 1.3 kg Frequently Asked Questions Do I need to upgrade my cabling to use 2.5G speeds? No. The TL-SG108-M2 supports 2.5 Gbps over existing Cat5e cabling up to 100 metres, so you can upgrade your switch speed without rewiring. Cat6 or Cat6a cabling will also work and may provide better performance in electrically noisy environments. Is the TL-SG108-M2 backward compatible with my existing Gigabit devices? Yes. Each port auto-negotiates at 100 Mbps, 1 Gbps, or 2.5 Gbps, so you can mix standard Gigabit devices with 2.5G devices on the same switch without any configuration. Does the TL-SG108-M2 support PoE? No. The TL-SG108-M2 does not support Power over Ethernet. If you need PoE for Wi-Fi 6 access points or IP cameras, consider a TP-Link PoE switch such as the TL-SG2210MP or TL-SG3210XHP-M2 which combines 2.5G ports with PoE+. Can the TL-SG108-M2 be wall-mounted? Yes. The metal chassis includes wall-mount support, making it easy to install in a comms room, behind a TV, or on any flat surface for a tidy, space-saving setup. Does it require any software or configuration? No. The TL-SG108-M2 is a plug-and-play unmanaged switch — simply connect your devices and it works immediately. There is no web interface, app, or driver required.

  Read more less

   

  $228.85 $85.00

• 

  TP-Link TP-Link Deco X20 3-Pack AX1800 Whole Home Mesh Wi-Fi 6 System

   

  TP-Link Deco X20 3-Pack – AX1800 Whole Home Mesh Wi-Fi 6 System The TP-Link Deco X20 3-Pack is a Wi-Fi 6 (802.11ax) mesh system that blankets your entire home in fast, seamless wireless coverage. Three Deco X20 units work together to deliver up to 530 square metres of combined coverage, automatically routing your devices to the strongest signal as you move from room to room. With AX1800 dual band speeds, OFDMA, MU-MIMO, WPA3 security, and TP-Link HomeCare™ built in, it’s a significant upgrade over traditional routers and older mesh systems for Australian homes with multiple users and dozens of connected devices. Key Features Wi-Fi 6 (AX1800): 1201Mbps on 5GHz and 574Mbps on 2.4GHz for a combined 1800Mbps — faster and more efficient than Wi-Fi 5 (AC) systems. Up to 530sqm Coverage: Three units provide whole-home mesh coverage suitable for large Australian homes, multi-storey residences, and open-plan layouts. OFDMA Technology: Orthogonal Frequency Division Multiple Access allows simultaneous data transmission to multiple devices, quadrupling network capacity compared to Wi-Fi 5. MU-MIMO: Multi-User Multiple Input Multiple Output enables multiple devices to receive data simultaneously rather than sequentially, reducing wait times under load. Seamless Roaming (802.11k/v/r): Devices automatically connect to the nearest Deco unit as you move around your home without dropping the connection or requiring manual switching. WPA3 Security: The latest Wi-Fi security standard provides stronger encryption and protection against brute-force attacks compared to WPA2. TP-Link HomeCare™: Built-in suite including Parental Controls, Antivirus (powered by Trend Micro), and QoS for a safer, more controlled home network. 2 × Gigabit Ethernet Ports per Unit: Each Deco X20 has two 10/100/1000Mbps ports for wired device connections or wired backhaul between units. Router & Access Point Modes: Operates as a standalone router or as an access point behind an existing router or modem. IPv4 & IPv6 Support: Future-ready dual-stack IP protocol support. Deco App Setup: Step-by-step guided setup via the free Deco app on iOS or Android — no web interface required. Ultra-Low Latency: Wi-Fi 6 improvements reduce latency for more responsive gaming, video calls, and real-time applications. Ideal Use Cases Large Australian homes (200–530sqm) where a single router cannot provide reliable coverage throughout. Multi-storey residences with thick walls, concrete floors, or complex layouts that block Wi-Fi signals. Households with 20+ connected devices including smartphones, smart TVs, IoT devices, and laptops. Home offices requiring reliable, low-latency Wi-Fi for video conferencing and large file transfers. Families needing parental controls and content filtering via HomeCare™ without a separate subscription service. Replacing an ageing router and range extender setup with a unified, seamless mesh network. Technical Specifications Specification Detail (per unit) Model Deco X20 (3-Pack) Wi-Fi Standard IEEE 802.11ax/ac/n/a (5GHz), IEEE 802.11ax/n/g/b (2.4GHz) Wi-Fi Speed (5GHz) Up to 1201Mbps (Wi-Fi 6) Wi-Fi Speed (2.4GHz) Up to 574Mbps (Wi-Fi 6) Combined Speed AX1800 (1201 + 574Mbps) Coverage (3-Pack) Up to 530 sqm Mesh Protocol 802.11k/v/r (seamless roaming) OFDMA Yes (2.4GHz & 5GHz) MU-MIMO Yes Ethernet Ports 2 × 10/100/1000Mbps RJ45 per unit Antenna 4 × Internal Omni-Directional Wireless Security WPA / WPA2-PSK / WPA3 Working Modes Router / Access Point WAN Types Dynamic IP / Static IP / PPPoE / L2TP / PPTP IP Protocols IPv4 & IPv6 Firewall SPI Firewall HomeCare™ Parental Controls, Antivirus (Trend Micro), QoS Power Consumption 13.5W max per unit Power Adapter Input: 100–240V / 50–60Hz; Output: 12V / 1.5A Dimensions (per unit) 110 × 110 × 114 mm Weight (3-Pack) 2.44kg Management App Deco (iOS & Android) SKU Deco X20(3-pack) Barcode (EAN) 6935364086947 What’s in the Box 3 × Deco X20 Wi-Fi 6 Units 3 × Power Adapters 1 × RJ45 Ethernet Cable Quick Start Guide Frequently Asked Questions What is the difference between the Deco X20 and a standard Wi-Fi router? A standard router broadcasts from a single point, leaving dead zones in larger homes. The Deco X20 3-Pack uses three units working together as a mesh network, providing seamless coverage across up to 530sqm with automatic handoff between units as you move around your home. Can I add more Deco units to expand coverage further? Yes. Additional Deco X20 units (or other compatible Deco models) can be added to the mesh network via the Deco app to extend coverage beyond 530sqm. Does the Deco X20 work with my existing NBN modem? Yes. In Router mode, connect the primary Deco X20 to your NBN modem or gateway via Ethernet. It supports Dynamic IP, Static IP, PPPoE, L2TP, and PPTP WAN types, covering all common Australian NBN connection types. What is TP-Link HomeCare™ and does it cost extra? HomeCare™ is TP-Link’s built-in security and management suite, including Parental Controls, Antivirus powered by Trend Micro, and QoS. It is included with the Deco X20 at no additional subscription cost. Does Wi-Fi 6 require Wi-Fi 6 devices to work? No. The Deco X20 is backward compatible with all Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n), and older devices. Wi-Fi 6 features such as OFDMA and improved efficiency are available to Wi-Fi 6 capable devices, while older devices connect normally at their supported speeds. Can I use the Deco X20 in Access Point mode behind my existing router? Yes. In Access Point mode, the Deco X20 connects to your existing router via Ethernet and provides mesh Wi-Fi coverage without replacing your current router’s routing and DHCP functions. Is wired backhaul supported between Deco units? Yes. Each Deco X20 has two Gigabit Ethernet ports. You can connect units via Ethernet cable for wired backhaul, which provides faster and more reliable inter-unit communication than wireless backhaul — recommended for the best performance in larger deployments.

  Read more less

   

  $449.00

• Save -$8.10

  TP-Link TP-Link Deco XE75 Pro AXE5400 Tri-Band Mesh Wi-Fi 6E System (1-Pack)

   

  TP-Link Deco XE75 Pro AXE5400 Tri-Band Mesh Wi-Fi 6E System (1-Pack) Next-Generation Wi-Fi 6E Mesh — Faster, Cleaner, Further The TP-Link Deco XE75 Pro brings Wi-Fi 6E to your home with tri-band AXE5400 performance across 2.4 GHz, 5 GHz, and the brand-new 6 GHz band. A single unit covers up to 270 m², and the dedicated 6 GHz backhaul keeps your devices running at full speed even as you add more Deco units to expand coverage. With a 2.5 Gbps port, AI-driven mesh, and TP-Link HomeShield security built in, the XE75 Pro is the premium whole-home Wi-Fi solution for Australian households that demand the best. Key Features Wi-Fi 6E tri-band — combined speeds up to 5,400 Mbps across 2.4 GHz, 5 GHz, and 6 GHz 6 GHz band — interference-free spectrum exclusive to Wi-Fi 6E devices, plus a dedicated high-speed backhaul Covers up to 270 m² per unit — expandable by adding more Deco units at any time Supports up to 200 connected devices simultaneously AI-driven mesh — automatically connects devices to the optimal band and unit as you move through your home 2.5 Gbps WAN/LAN port + 2 × Gigabit ports for wired connections BSS Colouring and Beamforming for reduced interference and stronger targeted signals TP-Link HomeShield — network security, IoT protection, and parental controls Backward compatible with all Wi-Fi generations (Wi-Fi 4/5/6) Works with any Australian ISP and modem Voice control via Amazon Alexa Managed via the Deco app (iOS & Android) Use Cases Large Homes: Single-unit coverage up to 270 m² — add more units for multi-storey or larger properties without any performance compromise. High-Bandwidth Households: 4K/8K streaming, cloud gaming, VR, and video conferencing all run simultaneously without congestion thanks to the 6 GHz band. Home Offices: The 2.5 Gbps wired port and dedicated backhaul ensure your workstation or NAS gets maximum throughput. Smart Home & IoT: HomeShield monitors and isolates IoT devices to protect your network from vulnerabilities. Families: Per-profile parental controls let you manage screen time and content filtering for each family member independently. Content Creators & Streamers: Low-latency 6 GHz connectivity keeps upload and download speeds consistent during live streams and large file transfers. Specifications Specification Detail Model Deco XE75 Pro (1-Pack) Wi-Fi Standard Wi-Fi 6E (802.11ax) — Tri-Band AXE5400 Combined Speed Up to 5,400 Mbps (574 Mbps @ 2.4 GHz + 2,402 Mbps @ 5 GHz + 2,402 Mbps @ 6 GHz) Coverage (1-Pack) Up to 270 m² Max Connected Devices Up to 200 6 GHz Band Yes — dedicated backhaul + client access Wired Ports 1 × 2.5 Gbps WAN/LAN + 2 × Gigabit LAN Mesh Technology AI-Driven Deco Mesh — single SSID, seamless roaming Security TP-Link HomeShield (network & IoT protection, parental controls) Voice Control Amazon Alexa App Deco App (iOS & Android) Backward Compatibility Wi-Fi 4 / Wi-Fi 5 / Wi-Fi 6 devices Expandable Yes — compatible with all Deco models Weight 1.25 kg Frequently Asked Questions What makes Wi-Fi 6E different from Wi-Fi 6? Wi-Fi 6E adds access to the 6 GHz frequency band, which is currently free of interference from legacy Wi-Fi devices. This means faster speeds, lower latency, and more available channels — particularly beneficial in dense environments or for bandwidth-intensive applications like 4K streaming and cloud gaming. Do I need a Wi-Fi 6E device to benefit from the Deco XE75 Pro? No. The XE75 Pro is fully backward compatible with Wi-Fi 4, 5, and 6 devices. Older devices will connect on the 2.4 GHz or 5 GHz bands as normal, while Wi-Fi 6E-capable devices can take advantage of the 6 GHz band for maximum performance. What does the dedicated 6 GHz backhaul mean? In a multi-unit mesh setup, the 6 GHz band is used exclusively for communication between Deco units (the backhaul), leaving the 2.4 GHz and 5 GHz bands fully available for your client devices. This prevents the speed loss that occurs in older mesh systems that share a single band for both backhaul and client traffic. Is the Deco XE75 Pro compatible with Australian ISPs? Yes. The XE75 Pro works with all major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and is compatible with NBN FTTP, FTTN, FTTB, HFC, and fixed wireless connection types. Can I mix the XE75 Pro with other Deco models? Yes. The Deco XE75 Pro is compatible with all other Deco mesh units. You can add older or newer Deco models to the same network to extend coverage, though the 6 GHz backhaul benefit applies only between XE75 Pro units. What is TP-Link HomeShield? HomeShield is TP-Link's built-in security suite that provides real-time network threat detection, IoT device protection, and parental controls. Basic features are free; an optional HomeShield Pro subscription unlocks advanced reporting and additional security features.

  Read more less

   

  $338.10 $330.00

• 

  UNV Uniview UNV ED-525B-WB Dual-Camera Wi-Fi Video Doorbell — 3MP+2MP, Package Detection, Wi-Fi 6

   

  Uniview UNV · Video DoorbellUniview UNV ED-525B-WB Dual-Camera Wi-Fi Video Doorbell — 3MP+2MP, Package Detection, Wi-Fi 6 The Uniview ED-525B-WB pairs a 3MP visitor camera with a 2MP downward-facing camera for package monitoring. It offers two-way audio, built-in 8 GB storage, package detection and dual-band Wi-Fi 6. Select a transformer compatible with the chime configuration and follow the wiring guide before using the call button. Specifications Model ED-525B-WB Cameras 3MP main visitor camera + 2MP ground/package camera Main Field of View 116° horizontal / 82.5° vertical Ground Camera Field of View 96.8° horizontal / 52.6° vertical Night Vision IR up to 5 m; white light up to 2 m WDR Main 80 dB / sub 58 dB; HDR and DWDR supported Detection Motion, human-body and package detection Audio Built-in microphone and speaker; two-way audio Storage 8 GB built-in eMMC Wireless Dual-band 2.4/5 GHz Wi-Fi 6 (802.11 b/g/n/ax); integrated BLE Integration UNV-Link app and Uniview NVR; Uniview private protocol Power Wireless chime: 12 VAC / 12 VA or 24 VAC / 12 VA. Mechanical chime: 24 VAC / 26 VA Installation Requirement Connect the mechanical chime before pressing the call button. Follow the manufacturer wiring guide to prevent damage. Power Kit 240 mAh lithium battery for mechanical-chime power kit Protection IP65 Operating Temperature −30°C to 60°C Dimensions 55.8 × 156.5 × 27.9 mm Weight 142 g net Warranty (Australia) 3 years · CCTV Guru Australia Downloads Manufacturer specifications Datasheet Quick Guide Frequently Asked Questions Why are there two cameras?3MP main visitor camera + 2MP ground/package camera. The downward camera helps monitor packages near the doorstep. Is this a battery-only doorbell?No. It requires wired AC power matched to the chime: Wireless chime: 12 VAC / 12 VA or 24 VAC / 12 VA. Mechanical chime: 24 VAC / 26 VA. The small battery belongs to the mechanical-chime power kit. What should I check before installation?Connect the mechanical chime before pressing the call button. Follow the manufacturer wiring guide to prevent damage. Does it need a memory card?It has 8 GB built-in eMMC storage. Can I speak to visitors?Yes. Its built-in microphone and speaker provide two-way audio using the compatible Uniview system. Which wireless networks does it support?Dual-band 2.4/5 GHz Wi-Fi 6 (802.11 b/g/n/ax); integrated BLE. Is it weather resistant?It is rated IP65 and operates from −30°C to 60°C. Seal and install it as directed. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $159.00

• 

  Ubiquiti Ubiquiti UC-Cast-Pro 4K Digital Signage Media Player

   

  Ubiquiti UniFi · NDAA & TAA COMPLIANT Transform commercial spaces with the Ubiquiti UC-Cast-Pro 4K Media Player Engineered for high-density commercial deployments, corporate communications, and retail environments, the Ubiquiti UC-Cast-Pro delivers flawless 4K multimedia playback and web content over standard HDMI displays. Centralized management through UniFi Connect allows administrators to effortlessly schedule playlists, monitor endpoints, and manage dynamic visual layouts across enterprise facilities. Display Output 4K Ultra HD (60 FPS) Processing Core Octa-Core ARM & GPU Connectivity Wi-Fi 6 & Gigabit PoE Storage & Build 32GB Storage / Compact Advanced hardware architecture meets seamless UniFi Connect integration Driven by an efficient octa-core processor (Cortex-A78 and Cortex-A55 blend) paired with an integrated Mali-G57 GPU and 8GB of RAM, the UC-Cast-Pro effortlessly renders demanding web layouts, high-frame-rate video feeds, and custom digital signage loops. Onboard 32GB solid-state storage guarantees reliable offline content execution during network dropouts, while flexible power options via Gigabit PoE or USB-C streamline physical installation behind modern flat-panel screens. Centralized Enterprise Management Manage playlists, trigger location-based content schedules, and push real-time emergency notifications across hundreds of screens using the scalable UniFi Connect ecosystem software. Flexible Mounting & Peripherals Features an ultra-compact form factor with included VESA/pole-mounting hardware (supporting 25-50mm diameters) alongside USB-C port support for external interactive touch or input peripherals. Technical Specification Matrix Model UC-Cast-Pro Processor Octa-core CPU (2x Cortex-A78 & 6x Cortex-A55) System Memory & Storage 8 GB RAM, 32 GB Internal Storage Video Output (1) HDMI Port (Supports up to 4K @ 60 FPS) Networking & Wi-Fi GbE RJ45 Port & Wi-Fi 6 (802.11a/b/g/n/ac/ax) Power Method PoE (48V DC, 0.35A) or USB Type-C (5V DC, 3A) Operating Temperature 0 to 40° C (32 to 104° F) Compliance & Certifications NDAA Compliant, CE, FCC, IC, UL 62368-1 How is the UC-Cast-Pro powered during deployment? The device can be powered conveniently via a single Gigabit Ethernet cable utilizing 48V Power over Ethernet (PoE) or alternatively through an independent USB Type-C (5V DC, 3A) power adapter. What software application is required for content management? Content creation, playlist scheduling, and device monitoring are handled natively through the web and mobile versions of the UniFi Connect application suite. Does the player support offline media playback? Yes. Thanks to its 32GB of onboard local storage, the UC-Cast-Pro seamlessly caches assigned playlists to guarantee uninterrupted playback even if network connectivity is temporarily lost. Is the hardware compliant with government procurement regulations? Yes, the UC-Cast-Pro model is fully NDAA compliant, satisfying strict federal and commercial supply chain security guidelines. Official Ubiquiti Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $559.00

• 

  Akuvox Akuvox S567G — 10″ Android 12 Smart Indoor Monitor with Wi-Fi 6 & SIP

   

  Akuvox S567G · 10″ Android 12 · Wi-Fi 6 · SIP Indoor Monitor Akuvox S567G 10″ Smart Indoor Monitor — Australian Stock & 2-Year Warranty The Akuvox S567G is a premium 10-inch Android 12 smart indoor monitor that turns your home intercom into a full touchscreen hub. With Google GMS certification, Wi-Fi 6, Bluetooth 5.0, quad high-output speakers and full SIP compatibility, it delivers crisp two-way video calling to your door stations while doubling as a smart-home control panel — ideal for villas, apartments and modern interiors. Display 10″ IPS Touchscreen Operating System Android 12 + Google GMS Wireless Wi-Fi 6 + Bluetooth 5.0 Audio Quad Speakers, Dual Mic Power PoE 802.3af or 12V DC Protocol SIP v1 / v2 Standard A 10″ Touchscreen That Feels Like a Tablet A 10-inch IPS capacitive display at 1280×800 with a 16:10 aspect ratio gives you sharp video, smooth swiping and an easy-to-read interface. Ambient light sensing adjusts brightness automatically to protect your eyes and save energy. Android 12 with Google Services Built In Running Android 12 with full Google GMS certification, the S567G goes beyond intercom — install apps, stream content and use Google services on a stable, modern platform backed by 4GB RAM and 16GB storage. Rock-Solid Wi-Fi 6 Connectivity Built-in Wi-Fi 6 (802.11ax) plus Bluetooth 5.0 eliminate the dropouts common on older monitors, so video calls to your door station stay clear and connected. A 10/100 RJ45 port with PoE keeps wired installs simple. Designed for Safety & Peace of Mind A built-in Voice Changer helps protect children and people living alone, while tamper-resistant hardware and quad 2W speakers ensure every call is heard loud and clear across the home. See the S567 in Action Akuvox S567 Indoor Monitor — Smart Intercom and More (official) General & Display Operating System Android 12 (Google GMS certified) Display 10″ IPS LCD, projected capacitive touch Resolution 1280 × 800, 16:10 aspect ratio Contrast / Brightness 900:1 contrast · 290 cd/m² Viewing Angle 80° left / right / upper / lower RAM / Storage 4GB RAM / 16GB ROM Front Panel Plastic Auto Brightness Yes — ambient light sensing Audio & Video Speakers Quad speakers, 8Ω / 2W Microphones Dual microphones, -26dB SIP SIP v1 (RFC2543), SIP v2 (RFC3261) Audio Codecs G.711a, G.711μ, G.729, G.722 (wideband) Audio Processing Echo cancellation, VAD, comfort noise, AGC Video Codecs H.263 & H.264 DTMF In-band, RFC2833, SIP Info Connectivity & Power Wi-Fi IEEE 802.11 b/g/n/ax (Wi-Fi 6) Bluetooth 5.0 Ethernet 1 × RJ45, 10/100Mbps adaptive Power 802.3af PoE or 12V DC connector I/O RS485 · 1 × relay out · 1 × bell in · 8 × alarm inputs Network Protocols IPv4/IPv6, HTTP(S), FTP, TFTP, SNMP, DNS, SNTP, RTSP, SRTP, RTP, TCP, UDP, TLS, ICMP, DHCP, ARP Tamper Resistant Supported Physical & Environmental Dimensions 278.5 × 165.1 × 22.8 mm Installation Wall-mounted & desktop (US or EU wall box) Operating Temperature -10°C ~ +45°C Storage Temperature -20°C ~ +70°C Working Humidity 10% ~ 90% Warranty 2-Year Limited Warranty (Australian stock) Installation Notes › Powered by 802.3af PoE over a single Cat6 lead, or a 12V DC supply where PoE isn't available. › Mounts to a standard US or EU electrical wall box, or sits on a desk with the optional stand. › Pairs with Akuvox SIP door stations and any standard SIP-capable PBX for two-way video calling. Downloads & Resources Akuvox S567G Datasheet Akuvox Indoor Monitor Quick Start Guide Akuvox Indoor Monitor User Manual Frequently Asked Questions Does the S567G work with Akuvox door stations?Yes. It follows the SIP standard (v1 and v2), so it pairs with Akuvox SIP door phones and any SIP-capable PBX for two-way video and audio calling. Can I use Google apps on it?Yes. The S567G runs Android 12 with full Google GMS certification, giving you access to Google services and apps on a stable platform. How is it powered?Via 802.3af PoE over a single network cable, or a separate 12V DC supply where PoE isn't available. Does it support Wi-Fi?Yes — built-in Wi-Fi 6 (802.11ax) plus Bluetooth 5.0 for a fast, stable wireless connection. What screen does it have?A 10-inch IPS capacitive touchscreen at 1280×800 resolution with automatic ambient-brightness adjustment. Can it connect to sensors or door release?Yes. It offers RS485, one relay output, one bell input and eight alarm inputs for integrating sensors and access devices. How do I mount it?Wall-mount to a standard US or EU electrical wall box, or use it on a desktop stand. Is it suitable for apartments and villas?Yes — it's designed for villas, apartment complexes, home-automation systems and modern interiors. Is the S567G NDAA compliant?Akuvox publishes an official NDAA compliance statement and its products are not named on the U.S. Section 889 list. Request the latest documentation for project-specific requirements. 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $944.00

• Save -$17.01

  Teltonika Teltonika RUTC41 4G Edge Router — Wi-Fi 6, Docker & Cat 4 LTE Industrial Router

   

  4G Edge Router Teltonika RUTC41 4G Edge Router — Wi-Fi 6, Docker & Cat 4 LTE Industrial Router The Teltonika RUTC41 brings powerful on-site computing to industrial deployments across Australia. This compact edge router combines 4G LTE Cat 4 connectivity with serious processing muscle — a dual-core 1.3 GHz CPU, 1 GB RAM and 8 GB eMMC storage — plus native Docker support so you can run containerised applications directly on the device. Add dual-band Wi-Fi 6, five Gigabit Ethernet ports, dual SIM with eSIM, and Teltonika's hardened RutOS firmware with zero-touch RMS management, and you have secure networking, cloud integration and real-time edge data logging in one rugged aluminium unit rated -40 °C to +75 °C. Connectivity 4G LTE Cat 4 Processing Dual-core / 1 GB Wired 5× Gigabit Industrial -40 to +75 °C Why choose the RUTC41 Edge computing with Docker Run containerised applications directly on the router. Process and filter data at the edge to cut cloud costs and latency, with a dual-core 1.3 GHz CPU and 8 GB eMMC storage to back it. Wi-Fi 6 performance Dual-band 802.11ax with MU-MIMO delivers up to 2402 Mbps on 5 GHz and supports up to 512 simultaneous clients — ideal for busy sites and dense IoT fleets. Five Gigabit ports + USB 1 WAN and 4 LAN Gigabit ports plus a USB 2.0 host for external storage, modems or serial devices give you the I/O of a switch and a router in one. Secure & remotely managed RutOS firmware with OpenVPN, IPsec, WireGuard, Tailscale and more, a hardened firewall, and Teltonika RMS for zero-touch provisioning and updates across your whole fleet. Technical specifications Mobile / Cellular 4G LTE Cat 4 — up to 150 Mbps DL / 50 Mbps UL 3G Up to 21 Mbps DL / 5.76 Mbps UL 2G Up to 236.8 Mbps DL / 236.8 Mbps UL SIM 2 × Mini SIM (2FF) + consumer eSIM (up to 7 profiles) SIM switching Auto-switch on weak signal, data/SMS limit, roaming, no network and more Mobile antennas 2 × SMA connectors (antennas supplied) Wi-Fi Standard Wi-Fi 6 (802.11ax), dual-band 2.4 GHz & 5 GHz, MU-MIMO Throughput Up to 2402 Mbps (5 GHz) / 576 Mbps (2.4 GHz) Capacity Up to 512 simultaneous clients Features Mesh (802.11s), fast roaming (802.11r), WPA3, hotspot / captive portal Wi-Fi antennas 3 × RP-SMA connectors Wired, USB & I/O Ethernet 5 × RJ45 10/100/1000 Mbps (1 × WAN, 4 × LAN) USB 1 × USB 2.0 Type-A (storage, modem, printer, USB-serial) PoE Passive PoE-in (Mode B, 9–30 VDC) on LAN1 Inputs / Outputs 1 × digital input, 1 × digital output Edge & System CPU MediaTek dual-core, 1.3 GHz, ARM Cortex-A53 Memory 1 GB DDR4 RAM Storage 8 GB eMMC + 16 MB NOR flash Containers Native Docker support for on-device applications Operating system RutOS (OpenWrt-based) Power Input 9–50 VDC, 4-pin, with reverse polarity & surge protection PoE input Passive PoE-in (Mode B, 9–30 VDC) via LAN1 Power supply 24 W PSU included Consumption < 5.5 W idle, < 13.5 W maximum Physical & Environment Casing Anodised aluminium housing, IP30 Dimensions 130.4 × 42.6 × 104 mm Weight 480 g Operating temperature -40 °C to +75 °C Mounting DIN rail, wall mount or flat surface (kit required) Software & Management VPN OpenVPN, IPsec, WireGuard, GRE, L2TP, PPTP, SSTP, DMVPN, ZeroTier, Tailscale, NetBird, OpenConnect Industrial protocols Modbus, DNP3, BACnet, OPC UA, DLMS/COSEM, MQTT, Data to Server Management WebUI, CLI, SNMP, TR-069, JSON-RPC, Teltonika RMS Compliance CE, UKCA, CB, RoHS, REACH, WEEE Ordering Information Order code (SKU) RUTC4100AA00 (AU PSU) EAN / Barcode 4779051849154 Warranty 2 years (24 months) — Australian warranty Frequently asked questions What is an edge router and why does it matter?An edge router processes data locally before sending it to the cloud. The RUTC41's CPU, RAM and Docker support let you run analytics and applications on-site, cutting latency and data costs. Can it really run Docker containers?Yes. Docker is natively supported, so you can deploy containerised software and microservices directly on the router using its 8 GB eMMC storage. What mobile speeds does it reach?It uses 4G LTE Cat 4 for up to 150 Mbps download and 50 Mbps upload, with 3G and 2G fallback. How many Ethernet ports does it have?Five Gigabit RJ45 ports — one WAN and four LAN — plus a USB 2.0 host port for external devices. What Wi-Fi standard is supported?Dual-band Wi-Fi 6 (802.11ax) with MU-MIMO, up to 2402 Mbps on 5 GHz and up to 512 connected clients. Does it support dual SIM and eSIM?Yes. Two Mini SIM (2FF) slots plus a consumer eSIM holding up to 7 profiles, with automatic failover between them. Can it be powered over Ethernet?Yes. It accepts 9–50 VDC and passive PoE-in (Mode B, 9–30 VDC) on LAN1, with a 24 W PSU in the box. Is it built for harsh environments?An anodised aluminium housing, IP30 rating and -40 °C to +75 °C operating range make it suitable for cabinets and industrial sites. What warranty applies in Australia?The RUTC41 carries a 2-year (24-month) warranty, backed by local Australian support. Downloads RUTC4100AA00 Datasheet Teltonika 4G Edge Router Quick Start Guide Teltonika 4G Edge Router User Manual 2-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $749.00 $731.99

• 

  TP-Link TP-Link ER706W-4G Omada 4G+ Cat6 AX3000 Gigabit VPN Router

   

  TP-Link ER706W-4G Omada 4G+ Cat6 AX3000 Gigabit VPN Router.Key features Nano SIM connectivity with 4G+ Cat6 download speeds up to 300 Mbps. Dual-band Wi-Fi 6: up to 2,402 Mbps at 5 GHz and 574 Mbps at 2.4 GHz. Six Gigabit ports and Omada centralised management. Manufacturer model: ER706W-4G

  Read more less

   

  $529.00

• 

  TP-Link TP-Link Deco X1500 1-Pack AX1500 Whole Home Mesh Wi-Fi System

   

  Whole-Home Wi-Fi 6 Mesh Coverage Made Simple The TP-Link Deco X1500 1-Pack brings Wi-Fi 6 (802.11ax) mesh technology to Australian homes at an accessible price point. With combined speeds of up to 1500 Mbps. Setup takes minutes via the Deco app, and once running, the system intelligently manages your devices with seamless roaming, so your connection follows you from room to room without dropping out. Key Features Wi-Fi 6 (802.11ax) for faster speeds and better performance in device-dense environments AX1500 dual-band: 300 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) Seamless whole-home roaming — one network name, no manual switching Supports 100+ connected devices simultaneously OFDMA and MU-MIMO for efficient multi-device performance WPA3 security for enhanced wireless protection Built-in TP-Link HomeShield for network security, parental controls, and real-time threat protection Easy setup and management via the Deco app (iOS & Android) Works as a router or access point — flexible deployment options Alexa and Google Assistant compatible for voice control Use Cases Medium to Large Homes: Covers multi-storey homes, townhouses, and properties up to 370 m² where a single router leaves dead zones. High Device Households: Wi-Fi 6 handles smart TVs, laptops, phones, tablets, smart home devices, and gaming consoles simultaneously without congestion. Families with Kids: HomeShield parental controls let you manage screen time, filter content, and monitor usage per device or profile. NBN & Home Broadband Users: Compatible with all Australian NBN connection types — simply connect the primary Deco unit to your NBN modem or gateway. Renters & Non-Technical Users: Plug-and-play setup with the Deco app — no networking knowledge required. Technical Specifications Specification Detail Model Deco X1500 (1-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/a/g/b) Wi-Fi Speed AX1500 — 300 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) Connected Devices 100+ Ethernet Ports (per unit) 1× Gigabit WAN/LAN + 1× Gigabit LAN Processor Quad-core 1.0 GHz Antennas 2× internal antennas per unit Security WPA3, WPA2/WPA (TKIP, AES) OFDMA / MU-MIMO Yes / Yes (2×2) Parental Controls Yes — via TP-Link HomeShield Voice Assistant Amazon Alexa, Google Assistant App Management Deco App (iOS & Android) Operating Mode Router Mode, Access Point Mode Power Supply 12V DC / 1.5A (per unit) Dimensions (per unit) 110 × 110 × 110 mm Colour White In the Box 2× Deco X1500 units, 2× power adapters, 1× RJ-45 Ethernet cable, quick start guide Official Product Video See the Deco X1500 in action and learn how easy it is to set up whole-home mesh Wi-Fi: Watch Deco X1500 Videos on YouTube Recommended Accessories & Compatible Products Deco X1500 3-Pack: Extend coverage further for larger homes or properties over 370 m² Additional Deco X1500 Units: Add single units to expand your existing mesh network TP-Link RE Series Wi-Fi Extenders: Budget-friendly option for extending coverage in specific areas TP-Link TL-SG105 5-Port Gigabit Switch: Add wired connections for smart TVs, gaming consoles, or desktop PCs TP-Link Tapo Smart Plugs & Cameras: Build a complete smart home ecosystem on your new mesh network Downloads Deco X1500 Datasheet & User Guide (TP-Link Australia) Firmware Downloads Frequently Asked Questions Is the Deco X1500 compatible with Australian NBN connections? Yes. The Deco X1500 works with all NBN connection types including FTTP, FTTN, FTTB, FTTC, and HFC. Simply connect the primary Deco unit to your existing NBN modem or gateway using an Ethernet cable. How many Deco X1500 units do I need for my home? The 1-Pack covers homes up to approximately 370 m². For larger homes, you can add additional Deco X1500 units to extend coverage — all Deco units of the same or compatible models work together in one mesh network. Can I use the Deco X1500 with my existing modem? Yes. In Router Mode, connect the primary Deco unit to your modem via Ethernet. In Access Point Mode, the Deco X1500 integrates with your existing router, extending Wi-Fi coverage without replacing your current setup. Does the Deco X1500 support Wi-Fi 6 devices? Yes. The Deco X1500 is a Wi-Fi 6 (802.11ax) router, delivering improved speeds and efficiency for Wi-Fi 6 devices. It is also fully backward compatible with older Wi-Fi 5, Wi-Fi 4, and earlier devices. What parental control features are included? The Deco X1500 includes TP-Link HomeShield, which provides content filtering, screen time scheduling, and real-time threat protection. Basic HomeShield features are free; advanced features are available via a HomeShield Pro subscription. Can I manage the Deco X1500 remotely? Yes. The Deco app (available for iOS and Android) allows you to monitor and manage your network from anywhere, including checking connected devices, running speed tests, and adjusting parental controls.

  Read more less

   

  $159.00

• 

  TP-Link TP-Link Archer NX200 5G Wi-Fi 6 Router

   

  TP-Link Archer NX200 5G Wi-Fi 6 Router Fast, Flexible 5G Internet for Australian Homes The TP-Link Archer NX200 delivers high-speed 5G connectivity with built-in Wi-Fi 6 (AX1800), giving Australian households a reliable alternative to fixed-line broadband. Simply insert a 5G SIM card and enjoy fast, low-latency internet — no technician visit required. Ideal for homes underserved by the NBN, renters, or anyone who needs a quick and flexible internet solution. Key Features 5G Sub-6GHz connectivity — supports SA and NSA network modes for broad Australian carrier compatibility Wi-Fi 6 (AX1800) — 1201 Mbps on 5 GHz + 574 Mbps on 2.4 GHz for faster, more efficient wireless performance Plug-and-play setup — insert SIM, power on, connect; no configuration required for most networks OFDMA & MU-MIMO — handles multiple devices simultaneously with reduced congestion 4× Gigabit LAN ports — wired connections for smart TVs, gaming consoles, NAS, and desktop PCs TP-Link Tether app — manage your network from your smartphone with ease Beamforming technology — focuses Wi-Fi signal toward connected devices for stronger, more stable connections WPA3 security — latest Wi-Fi encryption standard for enhanced network protection Use Cases NBN alternative — ideal for areas with poor fixed-line infrastructure or long NBN wait times Rental properties — no installation required; take your internet with you when you move Home offices — reliable, low-latency connection for video conferencing and cloud applications Temporary deployments — construction sites, pop-up offices, or short-term accommodation Backup internet — failover connectivity when your primary connection goes down Technical Specifications Specification Detail Model Archer NX200 Wi-Fi Standard Wi-Fi 6 (802.11ax), AX1800 Wi-Fi Speeds 5 GHz: up to 1201 Mbps | 2.4 GHz: up to 574 Mbps 5G Bands Sub-6GHz (SA/NSA) SIM Card Nano SIM LAN Ports 4× Gigabit Ethernet WAN Port 1× Gigabit Ethernet (optional wired WAN) Antennas 4× external antennas (2× 5G, 2× Wi-Fi) Security WPA3/WPA2-Personal Management TP-Link Tether App, Web Interface Power 12V / 2A Dimensions 220 × 148 × 38 mm Operating Temperature 0°C – 40°C Certifications RCM (Australia/NZ) Official Product Video Watch the official TP-Link Archer NX200 overview to see setup and features in action: View on YouTube — TP-Link Archer NX200 Frequently Asked Questions Which Australian carriers are compatible with the Archer NX200? The Archer NX200 supports Sub-6GHz 5G bands used by Telstra, Optus, and TPG/Vodafone. Always confirm band compatibility with your specific carrier plan before purchase. Does the Archer NX200 support 4G LTE as a fallback? Yes. The router supports both 5G and 4G LTE, automatically falling back to 4G when 5G signal is unavailable — ensuring a consistent connection. Can I use the Archer NX200 with any SIM card? The device accepts a standard Nano SIM. You can use any compatible 5G data SIM from an Australian carrier. Prepaid and postpaid data SIMs both work. Do I need to configure anything after inserting the SIM? For most Australian carriers, the router auto-detects APN settings. In some cases, you may need to manually enter APN details via the web interface or Tether app — your carrier can provide these. How many devices can the Archer NX200 support simultaneously? Thanks to Wi-Fi 6 with OFDMA and MU-MIMO, the router efficiently handles 20+ connected devices without significant performance degradation. Is the Archer NX200 suitable for outdoor or commercial use? The NX200 is designed for indoor residential use. For outdoor or commercial-grade 5G deployments, consider the TP-Link CPE or EAP series.

  Read more less

   

  $649.00

• Save -$51.00

  TP-Link TP-Link Archer MX700 5G AX6000 Wi-Fi 6 Router

   

  TP-Link Archer MX700 5G AX6000 Wi-Fi 6 Router Fast 5G Fixed Wireless Internet with AX6000 Wi-Fi 6 The TP-Link Archer MX700 combines a sub-6 GHz 5G modem with AX6000 dual-band Wi-Fi 6 in a single home router. Insert a SIM card from any compatible Australian carrier and replace your fixed-line broadband — or use it as a primary internet connection where NBN is unavailable, unreliable, or simply not fast enough. Description 5G fixed wireless access is rapidly expanding across Australia, and the Archer MX700 is built to take full advantage of it. Supporting sub-6 GHz 5G with download speeds of up to 3.6 Gbps on compatible networks, it delivers a genuine fixed broadband alternative for homes, home offices, and small businesses in 5G coverage areas. The integrated AX6000 Wi-Fi 6 radio distributes that 5G connection across your home at combined wireless speeds of up to 6000 Mbps — 2.4 GHz and 5 GHz — with OFDMA and MU-MIMO ensuring efficient performance across multiple devices simultaneously. A 2.5 Gbps LAN port provides a wired connection for NAS devices, gaming PCs, or smart TVs that demand the fastest possible throughput. The Archer MX700 is SIM-unlocked and compatible with major Australian 5G carriers. Four external antennas with 4G/5G signal optimisation help maintain a strong connection even in areas with moderate signal strength. Setup and management are handled through the TP-Link Tether app or a full web interface. Key Features 5G Sub-6 GHz — Download speeds up to 3.6 Gbps on compatible 5G networks AX6000 Wi-Fi 6 — Dual-band: 2.4 GHz 1148 Mbps + 5 GHz 4804 Mbps combined SIM Unlocked — Compatible with all major Australian 5G carriers (Telstra, Optus, Vodafone) 2.5 Gbps LAN Port — Multi-gigabit wired connection for NAS, gaming PCs, and smart TVs 4× Gigabit LAN Ports — Wired connectivity for multiple devices simultaneously OFDMA & MU-MIMO — Efficient multi-device Wi-Fi performance across busy households 4× External Antennas — Optimised for 5G/4G signal reception and Wi-Fi coverage 4G LTE Fallback — Automatically falls back to 4G LTE when 5G is unavailable WPA3 Security — Latest wireless encryption standard Tether App & Web UI — Easy setup and remote management via iOS or Android Use Cases Homes and home offices in 5G coverage areas replacing or supplementing NBN Rural and regional properties where NBN speeds are insufficient or unavailable Small businesses requiring fast, reliable internet without fixed-line infrastructure Temporary offices, construction sites, and pop-up locations needing fast broadband Backup internet connection during NBN or fixed-line outages Properties awaiting NBN connection requiring an immediate broadband solution Specifications Specification Detail 5G Standard 5G NR Sub-6 GHz (NSA/SA) 5G Download Speed Up to 3.6 Gbps 4G Fallback Yes (LTE Cat20, up to 2 Gbps) SIM Type Nano SIM SIM Lock Unlocked (all AU carriers) Wi-Fi Standard IEEE 802.11ax/ac/n/g/b/a (Wi-Fi 6) Wi-Fi Speed AX6000: 2.4 GHz 1148 Mbps + 5 GHz 4804 Mbps Wi-Fi Bands Dual-Band (2.4 GHz / 5 GHz) OFDMA Yes (UL/DL) MU-MIMO 4×4 (2.4 GHz) / 4×4 (5 GHz) 2.5G LAN Port 1× 2.5 Gbps LAN Gigabit LAN Ports 4× Gigabit LAN USB Port 1× USB 3.0 Antennas 4× external (5G/4G + Wi-Fi combined) Processor Quad-Core 1.5 GHz Memory 1 GB RAM / 512 MB Flash Security WPA3, WPA2, SPI Firewall Management TP-Link Tether app (iOS & Android), web UI Power 12V/4A Operating Temperature 0°C – 40°C Certifications RCM (Australia/NZ), ACMA Package Contents 1× Archer MX700 router, 4× antennas, 1× power adapter, quick start guide Recommended Accessories Prepaid or SIM-Only 5G Data Plan — Insert a Telstra, Optus, or Vodafone nano SIM with a 5G data plan to get online immediately TP-Link TL-SG108-M2 — Multi-Gigabit switch to extend 2.5G wired connectivity across your network Cat6A Ethernet Cable — Required for full 2.5 Gbps speeds on the wired LAN port External 5G Antenna (TS-9 or SMA) — For installations in low-coverage areas requiring improved 5G signal reception UPS / Battery Backup — Maintain internet connectivity during power outages for critical home office or business use Downloads Archer MX700 Datasheet & Specifications (TP-Link AU) Firmware & User Guide Downloads (TP-Link AU Support) Frequently Asked Questions Which Australian 5G carriers are compatible with the Archer MX700? The Archer MX700 is SIM-unlocked and designed for use with Australian 5G carriers including Telstra, Optus, and Vodafone. Compatibility depends on the 5G frequency bands (n78, n28, etc.) supported by your carrier in your area. Check the TP-Link AU spec page for the full band list and verify with your carrier before purchase. Can the Archer MX700 be used as a replacement for NBN? Yes, in areas with strong 5G coverage. The Archer MX700 is designed as a fixed wireless broadband solution and can fully replace an NBN connection for households and small businesses with access to a reliable 5G signal. Actual speeds depend on carrier network conditions, signal strength, and data plan. Does the Archer MX700 fall back to 4G if 5G is unavailable? Yes. The Archer MX700 automatically falls back to 4G LTE (up to LTE Cat20, 2 Gbps) when a 5G signal is not available, ensuring continuous connectivity without manual intervention. Can I connect an external antenna to improve 5G signal? The Archer MX700 uses four external antennas optimised for 5G and 4G reception. For installations in very low-coverage areas, check whether the router supports external antenna port connections (TS-9 or SMA) on the live TP-Link AU spec page, as this varies by hardware revision. Does the Archer MX700 support EasyMesh for whole-home Wi-Fi? Check the latest TP-Link AU product page for EasyMesh compatibility status on this model. If EasyMesh is not supported, TP-Link range extenders can still be used in standard repeater mode to extend Wi-Fi coverage from the Archer MX700.

  Read more less

   

  $350.00 $299.00

• Save -$11.00

  TP-Link TP-Link Omada EAP610GP-Desktop AX1800 Wi-Fi 6 Desktop Access Point with GPON

   

  TP-Link Omada EAP610GP-Desktop AX1800 Wi-Fi 6 Desktop Access Point with GPON All-in-One Wi-Fi 6 Access Point and GPON ONU for SMB Fibre Deployments The TP-Link Omada EAP610GP-Desktop combines an AX1800 Wi-Fi 6 access point with a built-in GPON ONU (Optical Network Unit) in a single compact desktop unit. Designed for small and medium businesses deploying fibre broadband, it eliminates the need for a separate ONT and access point — simplifying installation, reducing hardware costs, and cutting down on cable clutter. Description Traditional fibre deployments require a separate GPON ONT to terminate the fibre connection, followed by a router or access point for wireless coverage. The EAP610GP-Desktop integrates both functions into one device, making it an efficient solution for SMB environments such as offices, retail spaces, hospitality venues, and multi-tenant buildings where simplicity and manageability are priorities. As part of the TP-Link Omada Software Defined Networking (SDN) ecosystem, the EAP610GP-Desktop is fully managed via the Omada Controller — either hardware-based (OC300), software-based, or through the Omada Cloud. This enables centralised configuration, monitoring, and management of multiple sites and devices from a single interface, making it well suited to MSPs and IT teams managing distributed deployments across Australia. A PoE output port allows the unit to power a downstream PoE device such as an IP phone or IoT sensor, further reducing the need for additional power infrastructure at the deployment point. Key Features Built-in GPON ONU — Terminates fibre directly; no separate ONT required AX1800 Wi-Fi 6 (802.11ax) — Dual-band: 2.4 GHz 574 Mbps + 5 GHz 1201 Mbps OFDMA & MU-MIMO — Efficient multi-device performance in busy SMB environments PoE Output Port — Powers a downstream PoE device (e.g. IP phone, IoT sensor) without a separate injector Omada SDN Managed — Centralised cloud or controller-based management for single and multi-site deployments Omada Cloud Access — Remote monitoring and management from anywhere via the Omada app or web portal WPA3 Security — Latest wireless encryption standard Guest Network & VLAN Support — Isolate guest traffic from business network Compact Desktop Form Factor — Discreet placement on desks, counters, or shelves without ceiling mounting Backward Compatible — Works with Wi-Fi 4 and Wi-Fi 5 client devices Use Cases Small offices and retail spaces deploying fibre broadband without a separate ONT Hospitality venues (cafes, hotels, serviced apartments) requiring combined fibre termination and Wi-Fi Multi-tenant buildings where per-unit fibre termination and Wi-Fi is required MSPs deploying standardised, remotely managed fibre + Wi-Fi solutions across multiple client sites Reception desks and front-of-house areas requiring discreet desktop Wi-Fi without ceiling mounting Environments needing PoE output to power a downstream IP phone or IoT device from a single unit Specifications Specification Detail Wi-Fi Standard IEEE 802.11ax/ac/n/g/b/a (Wi-Fi 6) Wi-Fi Speed AX1800: 2.4 GHz 574 Mbps + 5 GHz 1201 Mbps Bands Dual-Band (2.4 GHz / 5 GHz) OFDMA Yes (UL/DL) MU-MIMO 2×2 (2.4 GHz) / 2×2 (5 GHz) GPON Interface 1× SC/APC GPON (ITU-T G.984) WAN Port 1× Gigabit WAN (RJ45) LAN Ports 2× Gigabit LAN (RJ45) PoE Output 1× PoE out port (802.3af, up to 15.4W) Power Input DC 12V/1.5A (power adapter included) Max Concurrent Clients Up to 64 clients SSIDs Up to 16 SSIDs (8 per band) Management Omada Controller (hardware/software/cloud), Omada app Security WPA3, WPA2, Guest Network, VLAN Mounting Desktop (stand included) Operating Temperature 0°C – 40°C Certifications RCM (Australia/NZ) Package Contents 1× EAP610GP-Desktop, 1× power adapter, 1× desktop stand, quick installation guide Recommended Accessories TP-Link Omada OC300 Hardware Controller — On-premises Omada SDN controller for multi-site management without cloud dependency TP-Link Omada EAP670 or EAP773 — Ceiling-mount Wi-Fi 6 or Wi-Fi 7 access points to complement desktop coverage in larger spaces TP-Link Omada TL-SG2210P — Managed PoE switch for expanding wired and PoE infrastructure at the deployment site SC/APC Fibre Patch Lead — Required to connect the GPON port to the building’s fibre distribution point Downloads EAP610GP-Desktop Datasheet & Specifications (Omada AU) Firmware & User Guide Downloads (TP-Link AU Support) Frequently Asked Questions Does the EAP610GP-Desktop replace both the GPON ONT and the access point? Yes. The EAP610GP-Desktop integrates a GPON ONU (functionally equivalent to an ONT) and a Wi-Fi 6 access point in a single unit. In most SMB deployments, it eliminates the need for a separate ONT device, reducing hardware count and simplifying installation. Is the EAP610GP-Desktop compatible with Australian GPON fibre networks? The device supports the ITU-T G.984 GPON standard used by most Australian fibre network operators. Compatibility with specific carriers should be confirmed with your fibre provider or network operator prior to deployment, as some operators use proprietary ONU provisioning. Can the EAP610GP-Desktop be managed without an Omada Controller? Yes. The device can be configured in standalone mode via its web interface without an Omada Controller. However, centralised management, multi-site visibility, and advanced SDN features require an Omada Controller (hardware, software, or cloud-based). What devices can be powered by the PoE output port? The PoE output port supports IEEE 802.3af, providing up to 15.4W. Compatible devices include IP phones, VoIP handsets, IoT sensors, and other 802.3af-compliant PoE devices. It does not support 802.3at (PoE+) devices requiring more than 15.4W. How many SSIDs and VLANs does the EAP610GP-Desktop support? The EAP610GP-Desktop supports up to 16 SSIDs (8 per band) and VLAN tagging, enabling network segmentation for guest Wi-Fi, staff networks, IoT devices, and management traffic on a single access point.

  Read more less

   

  $270.00 $259.00

• 

  TP-Link TP-Link Archer VX1800V AX1800 Wi-Fi 6 VDSL/ADSL Modem Router

   

  TP-Link Archer VX1800V AX1800 Wi-Fi 6 VDSL/ADSL Modem Router Overview The TP-Link Archer VX1800V is an AX1800 dual-band Wi-Fi 6 modem router designed for Australian NBN FTTN and FTTB connections. Combining a built-in VDSL2/ADSL2+ modem with next-generation Wi-Fi 6 technology and integrated VoIP, it delivers fast, reliable connectivity for homes and small offices on DSL-based broadband services. Description Whether you're streaming 4K video, running smart home devices, or managing a busy home office, the Archer VX1800V handles it all. Its Wi-Fi 6 (802.11ax) engine delivers combined speeds of up to 1800 Mbps across 2.4 GHz and 5 GHz bands, while OFDMA and MU-MIMO technology ensures multiple devices stay connected without congestion. The integrated VoIP port lets you keep your existing landline phone running through your broadband connection — no separate ATA adapter required. Key Features Wi-Fi 6 (802.11ax): Up to 1800 Mbps combined — 574 Mbps on 2.4 GHz + 1201 Mbps on 5 GHz Built-in VDSL2/ADSL2+ Modem: Compatible with Australian NBN FTTN and FTTB services VoIP Support: 1× RJ11 FXS port for connecting a standard telephone handset OFDMA & MU-MIMO: Simultaneous multi-device connectivity with reduced latency Beamforming: Focuses Wi-Fi signal toward connected devices for improved range and stability 4× Gigabit LAN Ports: Wired connections for PCs, NAS, switches, and IP cameras 1× Gigabit WAN Port: Dual-WAN flexibility — use as a standalone router with a separate modem or fibre ONT USB 3.0 Port: Share storage or printers across the network TP-Link Tether App: Easy setup and management from your smartphone HomeCare Security: Built-in antivirus, parental controls, and QoS powered by Trend Micro Use Cases NBN FTTN/FTTB Homes: All-in-one modem router replacement — no separate modem needed Home Offices: Stable, high-throughput Wi-Fi 6 for video conferencing and cloud applications Multi-Device Households: OFDMA handles 20+ concurrent devices without performance drops VoIP Users: Retain your landline number over broadband with the built-in FXS port Small Business: Guest network isolation, QoS prioritisation, and USB NAS sharing Specifications Specification Detail Wi-Fi Standard IEEE 802.11ax/ac/n/a (5 GHz), IEEE 802.11ax/n/b/g (2.4 GHz) Wi-Fi Speeds 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) DSL Standards VDSL2 (Profile 17a/35b), ADSL/ADSL2/ADSL2+ WAN Port 1× Gigabit RJ45 (for fibre/cable modem) LAN Ports 4× Gigabit RJ45 Phone Port 1× RJ11 FXS (VoIP) USB 1× USB 3.0 Antennas 4× Fixed external antennas Security WPA3/WPA2, SPI Firewall, HomeCare (Trend Micro) Dimensions 265 × 135 × 45 mm Power 12V ⎓ 2A Operating Temperature 0°C – 40°C Certifications RCM (Australia/NZ) Official Video Watch the TP-Link Archer VX1800V overview and setup guide on YouTube Downloads Archer VX1800V Datasheet, User Guide & Firmware — TP-Link AU Support Frequently Asked Questions Is the Archer VX1800V compatible with Australian NBN FTTN and FTTB services? Yes. The Archer VX1800V includes a built-in VDSL2 modem (Profile 17a/35b) that is compatible with NBN FTTN (Fibre to the Node) and FTTB (Fibre to the Building) connections. It is not required for NBN FTTP, HFC, or Fixed Wireless — in those cases, use the Gigabit WAN port with your existing NBN equipment. Can I use this router with a fibre or cable connection instead of DSL? Yes. The Gigabit WAN port allows you to connect the Archer VX1800V to an external modem or ONT, making it suitable as a standalone Wi-Fi 6 router for any broadband type. Does the VoIP port work with any phone provider? The FXS port supports SIP-based VoIP services. Compatibility depends on your VoIP provider's configuration. Check with your provider for SIP credentials and setup instructions. How do I set up and manage the Archer VX1800V? You can set up the router via the web interface at tplinkmodem.net or using the free TP-Link Tether app (iOS and Android). The Tether app supports remote management, parental controls, and device prioritisation. What is TP-Link HomeCare? HomeCare is TP-Link's built-in security suite powered by Trend Micro. It includes real-time antivirus protection, intrusion prevention, parental controls with content filtering, and QoS (Quality of Service) for traffic prioritisation — all at no additional subscription cost. Does the Archer VX1800V support Wi-Fi 6 on both bands? Yes. Both the 2.4 GHz and 5 GHz radios support Wi-Fi 6 (802.11ax), including OFDMA and MU-MIMO for improved efficiency across multiple connected devices.

  Read more less

   

  $249.00

• 

  TP-Link TP-Link TL-WR1502X AX1500 Wi-Fi 6 Router

   

  TP-Link TL-WR1502X AX1500 Wi-Fi 6 Router Next-Generation Wi-Fi 6 for Faster, Smarter Home Networking The TP-Link TL-WR1502X brings Wi-Fi 6 (802.11ax) technology to everyday home and small office networking. With combined speeds of up to 1500 Mbps, reduced latency, and improved performance in congested environments, it's a straightforward upgrade for households and small businesses ready to move beyond Wi-Fi 5. Product Description Designed for reliability and ease of use, the TL-WR1502X delivers dual-band Wi-Fi 6 connectivity with a 2.4 GHz band (300 Mbps) and a 5 GHz band (1201 Mbps). OFDMA and MU-MIMO technologies allow the router to serve multiple devices simultaneously without sacrificing speed — ideal for households with smart TVs, laptops, smartphones, and IoT devices all competing for bandwidth. Setup is straightforward via the Tether app, and the router supports TP-Link's HomeCare security suite for built-in network protection. A compact form factor makes it easy to position centrally in a home or small office without dominating the space. Key Features Wi-Fi 6 (802.11ax) — Up to 1500 Mbps combined dual-band throughput OFDMA & MU-MIMO — Simultaneous multi-device connectivity with reduced congestion 1× Gigabit WAN + 3× Gigabit LAN — Full-gigabit wired connectivity Beamforming — Focuses wireless signal toward connected devices for stronger, more stable connections TP-Link HomeCare — Built-in antivirus, parental controls, and QoS Tether App — Easy setup and remote management via iOS and Android WPA3 Security — Latest wireless encryption standard for enhanced network protection BSS Colouring — Reduces interference from neighbouring Wi-Fi 6 networks Use Cases Family Homes — Handles 20+ connected devices including smart TVs, gaming consoles, and smartphones without slowdowns Home Offices — Stable, low-latency connectivity for video conferencing and cloud applications Small Businesses — Reliable wireless coverage for open-plan offices and retail environments ISP Modem Replacement — Pairs with an existing modem or replaces ISP-supplied equipment for improved performance Security Camera Networks — Provides stable wireless backhaul for IP cameras and NVR systems in smaller deployments Technical Specifications Specification Detail Wi-Fi Standard IEEE 802.11ax/ac/n/a (5 GHz), IEEE 802.11ax/n/b/g (2.4 GHz) Wi-Fi Speeds 5 GHz: 1201 Mbps | 2.4 GHz: 300 Mbps Wi-Fi Generation Wi-Fi 6 (AX1500) Ports 1× Gigabit WAN, 3× Gigabit LAN Antennas 4× Fixed External Antennas Security WPA, WPA2, WPA3, WPA2/WPA3 Mixed MU-MIMO 2×2 (2.4 GHz) + 2×2 (5 GHz) OFDMA Uplink & Downlink Processor Dual-Core CPU USB Port 1× USB 3.0 Power 12V ⎓ 1.5A Dimensions 225.5 × 143.5 × 35.5 mm Operating Temperature 0°C – 40°C Certifications CE, RoHS, Wi-Fi CERTIFIED 6™ Official Product Video Watch the official TP-Link TL-WR1502X overview to see Wi-Fi 6 performance in action: View on YouTube — TP-Link TL-WR1502X Recommended Accessories & Compatible Products TP-Link RE605X — AX1800 Wi-Fi 6 Range Extender for expanded coverage TP-Link TL-SG105 — 5-Port Gigabit Desktop Switch for additional wired connections TP-Link UB400 — Nano USB Bluetooth Adapter for Bluetooth-enabled devices Cat6 Ethernet Patch Cables — For reliable gigabit wired connections to NVRs, PCs, and switches Downloads TL-WR1502X Datasheet & Specifications (TP-Link AU) Firmware, Drivers & User Guide Downloads (TP-Link AU Support) Frequently Asked Questions Does the TL-WR1502X support NBN connections? Yes. The TL-WR1502X connects to your NBN modem or gateway via the Gigabit WAN port and supports DHCP, PPPoE, Static IP, and L2TP/PPTP connection types — compatible with all major Australian ISPs. What is the difference between Wi-Fi 6 and Wi-Fi 5? Wi-Fi 6 (802.11ax) delivers higher throughput, lower latency, and better performance in environments with many connected devices compared to Wi-Fi 5 (802.11ac). Technologies like OFDMA and BSS Colouring make it particularly effective in dense device environments. Can I manage the router remotely? Yes. The TP-Link Tether app (iOS and Android) allows you to set up, monitor, and manage the router remotely from anywhere with an internet connection. Does it support a guest Wi-Fi network? Yes. The TL-WR1502X supports a separate guest network on both 2.4 GHz and 5 GHz bands, keeping guest traffic isolated from your main network. Is the TL-WR1502X suitable for IP security cameras? Yes, for smaller deployments. It provides stable wireless and wired connectivity for IP cameras and NVR systems. For larger or more demanding CCTV networks, a dedicated PoE switch and access point setup is recommended. What warranty applies in Australia? TP-Link products sold in Australia are covered by a 3-year limited warranty. Please retain your proof of purchase for warranty claims.

  Read more less

   

  $113.46

• 

  TP-Link TP-Link Archer TX10E AX900 Wi-Fi 6 Bluetooth PCIe Adapter

   

  TP-Link Archer TX10E AX900 Wi-Fi 6 Bluetooth PCIe Adapter.Key features Wi-Fi 6 and Bluetooth connectivity for a compatible desktop computer. Up to 287 Mbps at 2.4 GHz and 600 Mbps at 5 GHz. PCIe adapter form factor. Manufacturer model: Archer TX10E

  Read more less

   

  $47.00

• 

  TP-Link TP-Link Archer TX50UH AX3000 High Gain Wi-Fi 6 USB Adapter

   

  TP-Link Archer TX50UH AX3000 High Gain Wi-Fi 6 USB Adapter Bring Wi-Fi 6 to Your Desktop PC The TP-Link Archer TX50UH is a high-gain USB Wi-Fi adapter that upgrades any desktop or laptop to Wi-Fi 6 (802.11ax) — delivering faster speeds, lower latency, and improved performance in congested wireless environments. With dual high-gain antennas and USB 3.0 connectivity, it's built for installers and end-users who demand reliable, high-throughput wireless without replacing their entire system. Key Features Wi-Fi 6 (802.11ax): AX3000 dual-band speeds up to 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz High-Gain Antennas: Two external antennas for extended range and stronger signal reception OFDMA & MU-MIMO: Simultaneous data transmission to multiple devices for reduced congestion BSS Colouring: Minimises interference from neighbouring Wi-Fi networks USB 3.0 Interface: High-speed connection via included USB extension base for flexible placement WPA3 Security: Latest wireless encryption standard for enhanced network protection Broad OS Support: Compatible with Windows 7/8/8.1/10/11 (64-bit) Easy Setup: Plug-and-play installation with included driver CD and quick install guide Use Cases Adding Wi-Fi 6 capability to desktop PCs without a PCIe slot available Upgrading older workstations in small business or home office environments Temporary or portable wireless connectivity for laptops and ultrabooks Improving wireless performance in dense Wi-Fi environments (apartments, offices, co-working spaces) Specifications Specification Detail Model Archer TX50UH Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/g/b/a) Wi-Fi Speeds AX3000: 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz) Frequency Band Dual-Band (2.4 GHz & 5 GHz) Interface USB 3.0 Antennas 2 × External High-Gain Antennas MU-MIMO Yes (2×2) OFDMA Yes BSS Colouring Yes Security WPA3, WPA2, WPA, WEP OS Compatibility Windows 7/8/8.1/10/11 (64-bit) Package Contents Archer TX50UH, USB 3.0 Extension Base, Resource CD, Quick Installation Guide Certifications CE, FCC, RoHS Frequently Asked Questions Is the Archer TX50UH compatible with Windows 11? Yes. The Archer TX50UH supports Windows 7, 8, 8.1, 10, and 11 (64-bit). macOS is not officially supported — check TP-Link's website for the latest driver availability. Does it work with Wi-Fi 5 (802.11ac) routers? Yes. The adapter is backwards compatible with 802.11ac, 802.11n, 802.11g, 802.11b, and 802.11a networks. You'll only achieve Wi-Fi 6 speeds when connected to a Wi-Fi 6 router. Do I need to install drivers manually? A driver CD is included in the box. You can also download the latest drivers directly from the TP-Link Australia support page. Can I use this adapter with a USB 2.0 port? The adapter uses a USB 3.0 interface for maximum throughput. It may function in a USB 2.0 port, but speeds will be limited by the USB 2.0 bandwidth ceiling of 480 Mbps. What is the USB extension base for? The included USB 3.0 extension base allows you to position the adapter away from your PC tower for better signal reception and antenna orientation flexibility. Downloads Archer TX50UH Datasheet (PDF) — TP-Link Australia Driver & Software Downloads — TP-Link Australia Support

  Read more less

   

  $59.00

• 

  TP-Link TP-Link Archer TX10UB Nano AX900 Wi-Fi 6 & Bluetooth 5.3 Nano USB Adapter

   

  TP-Link Archer TX10UB Nano AX900 Wi-Fi 6 & Bluetooth 5.3 Nano USB Adapter.Key features Up to 600 Mbps at 5 GHz and 287 Mbps at 2.4 GHz. Bluetooth 5.3 connectivity. Compact USB 2.0 adapter with internal antennas. Manufacturer model: Archer TX10UB Nano

  Read more less

   

  $32.00

• 

  TP-Link TP-Link Archer NX500 Outdoor 5G Wi-Fi Router

   

  Outdoor 5G Connectivity with Wi-Fi 6E Performance The TP-Link Archer NX500 is a purpose-built outdoor 5G router that brings fast, reliable fixed wireless internet to homes and businesses across Australia. Combining a 5G Sub-6 GHz modem with AXE5400 tri-band Wi-Fi 6E, it delivers high-speed connectivity in a weatherproof enclosure designed to be mounted outdoors — closer to the 5G signal source — for maximum reception and throughput. Whether you’re in a regional area without fixed-line NBN, or simply want a high-performance wireless WAN alternative, the Archer NX500 is engineered to replace unreliable connections with a robust, future-ready 5G solution. Key Features 5G Sub-6 GHz modem with 4G LTE fallback for continuous connectivity AXE5400 tri-band Wi-Fi 6E: 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz) + 2402 Mbps (6 GHz) Outdoor weatherproof enclosure — IP65-rated for rain, dust, and UV resistance Directional antenna array for enhanced 5G signal capture PoE-powered via included PoE injector — single cable installation Gigabit Ethernet port for wired connection to indoor router or switch Works as a standalone router or in bridge mode with your existing network Easy setup and management via the Tether app (iOS & Android) Supports Australian 5G bands (Sub-6 GHz) across major carriers Built-in signal strength indicator for optimal mounting position Use Cases Regional & Rural Australia: Ideal for properties beyond the NBN fixed-line footprint where 5G fixed wireless is the best available broadband option. NBN Alternative: Replace slow or unreliable fixed-line NBN with a high-speed 5G connection, particularly in areas with strong 5G coverage from Telstra, Optus, or TPG. Temporary & Construction Sites: Deploy fast internet quickly at job sites, events, or pop-up locations without waiting for fixed-line installation. Farms & Large Properties: Mount on a shed, pole, or outbuilding to capture the best available 5G signal and distribute Wi-Fi across the property. Business Continuity / WAN Failover: Use as a secondary WAN connection to maintain internet access if your primary fixed-line service goes down. Technical Specifications Specification Detail Model Archer NX500 5G Standard 5G NR Sub-6 GHz (NSA/SA) 4G Fallback Yes — LTE Cat 20 Wi-Fi Standard Wi-Fi 6E (802.11ax) Tri-Band Wi-Fi Speed AXE5400: 574 + 2402 + 2402 Mbps SIM Card Slot 1× Nano SIM Ethernet Port 1× Gigabit RJ45 (PoE in) Power PoE (802.3at) via included PoE injector IP Rating IP65 (weatherproof) Operating Temperature -30°C to 60°C Mounting Pole or wall mount (hardware included) App Management TP-Link Tether (iOS & Android) Operating Mode Router Mode, Bridge Mode Certifications RCM (Australia), CE, RoHS In the Box Archer NX500 unit, PoE injector, power adapter, mounting hardware, quick start guide Official Product Video See how the Archer NX500 is installed and configured for outdoor 5G fixed wireless: Watch Archer NX500 Videos on YouTube Recommended Accessories & Compatible Products TP-Link Deco XE75 Pro (AXE5400 Mesh): Pair with the NX500 in bridge mode to distribute Wi-Fi 6E throughout a large home or office TP-Link TL-SG105 5-Port Gigabit Switch: Expand wired connections from the NX500’s single Ethernet output TP-Link TL-POE160S PoE Injector (spare): Replacement or additional PoE injector for extended cable runs Outdoor-rated Cat6 Ethernet Cable: UV-resistant, direct-burial rated cable for the outdoor run between the NX500 and your indoor equipment TP-Link Tapo C500 Outdoor Camera: Add outdoor security cameras to your new 5G-powered network Downloads Archer NX500 Datasheet & User Guide (TP-Link Australia) Firmware Downloads Frequently Asked Questions Does the Archer NX500 work with Australian 5G networks? Yes. The Archer NX500 supports 5G Sub-6 GHz bands used by Australian carriers including Telstra, Optus, and TPG/Vodafone. Check your carrier’s 5G coverage map to confirm signal availability at your location before purchasing. Do I need an existing internet connection to use the NX500? No. The Archer NX500 is a standalone 5G router. Simply insert a nano SIM card from a 5G-capable Australian carrier, mount the unit outdoors, and connect it via Ethernet to your indoor router or switch. No fixed-line connection is required. How is the Archer NX500 powered? The NX500 is powered via PoE (Power over Ethernet) using the included PoE injector. A single Ethernet cable carries both data and power from the indoor PoE injector to the outdoor unit — no separate power cable is needed at the mounting point. How far can the Ethernet cable run between the NX500 and the PoE injector? Standard PoE over Ethernet supports cable runs up to 100 metres. Use outdoor-rated, UV-resistant Cat5e or Cat6 cable for any exposed runs. Can I use the NX500 in bridge mode with my existing router? Yes. In bridge mode, the NX500 acts as a 5G WAN modem and passes the connection through to your existing router, which handles DHCP, firewall, and Wi-Fi distribution. This is ideal for integrating 5G into an existing network without replacing your current setup. Is the Archer NX500 suitable for use in regional and rural Australia? Yes — this is one of its primary use cases. The outdoor mounting and directional antenna design allow it to capture weaker 5G or 4G LTE signals that an indoor router may not reliably receive, making it well-suited for regional properties, farms, and areas at the edge of mobile coverage.

  Read more less

   

  $849.00

• 

  TP-Link TP-Link Omada EAP650-Desktop AX3000 Wi-Fi 6 Desktop Access Point

   

  TP-Link Omada EAP650-Desktop AX3000 Wi-Fi 6 Desktop Access Point Powerful Desktop Wi-Fi 6 for Business and Home The TP-Link Omada EAP650-Desktop delivers AX3000 dual-band Wi-Fi 6 performance in a compact, desktop form factor — no ceiling mount required. With a 2.5G uplink port and seamless integration into the Omada SDN ecosystem, it's an ideal solution for small-to-medium businesses, retail environments, hospitality venues, and high-density home offices that demand reliable, fast wireless connectivity. Key Features Wi-Fi 6 (802.11ax): AX3000 dual-band — up to 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz for faster throughput and reduced congestion. 2.5G Uplink Port: Future-proof wired backhaul to eliminate bottlenecks on high-speed networks. OFDMA & MU-MIMO: Serves multiple clients simultaneously with improved efficiency — critical in dense environments. BSS Colouring: Reduces interference from neighbouring Wi-Fi 6 networks for cleaner airtime. Omada SDN Integration: Centralised management via Omada Hardware Controller, Software Controller, or Omada Cloud — zero-touch provisioning supported. Seamless Roaming: 802.11r/k/v fast roaming for uninterrupted connectivity as users move between access points. WPA3 Security: Latest wireless encryption standard for enhanced network protection. Desktop Form Factor: No ceiling or wall mounting required — simply place on a desk, shelf, or counter. PoE+ Powered: Powered via PoE+ (802.3at) — no separate power adapter needed when connected to a compatible switch. Up to 300 Clients: Supports up to 300 concurrent wireless clients per AP. Use Cases Small & Medium Business: Deploy in open-plan offices, meeting rooms, or reception areas without ceiling infrastructure. Retail & Hospitality: Provide reliable guest Wi-Fi in cafés, restaurants, hotels, and boutique shops. Healthcare & Education: Support high client density in waiting rooms, classrooms, and staff areas. Home Office: Upgrade a dedicated workspace with Wi-Fi 6 performance without complex installation. Omada Network Expansion: Add coverage to an existing Omada SDN deployment with minimal configuration. Technical Specifications Specification Detail Wi-Fi Standard IEEE 802.11ax/ac/n/g/b/a (Wi-Fi 6) Speed AX3000 — 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz) Frequency Bands 2.4 GHz & 5 GHz (Dual-Band) Antennas 4× internal omnidirectional antennas Uplink Port 1× 2.5G RJ45 (PoE+ 802.3at) Max Clients 300 SSIDs Up to 16 (8 per band) Security WPA3, WPA2, WPA, WEP; 802.1X Roaming 802.11r/k/v Fast Roaming Management Omada App, Omada Software Controller, Hardware Controller, Cloud Power Supply PoE+ (802.3at, 25.5W) or DC 12V/1.5A adapter Dimensions 160 × 160 × 45.1 mm Weight 430 g Operating Temperature 0–40°C Certifications CE, FCC, RoHS Official Product Video Watch the official TP-Link Omada EAP650-Desktop overview to see how it fits into a complete Omada SDN deployment: View on YouTube — TP-Link Omada EAP650-Desktop Recommended Accessories & Compatible Products TP-Link Omada TL-SG2210P — 8-Port PoE+ Gigabit Smart Switch (powers the EAP via PoE+) TP-Link Omada OC200 — Hardware Controller for managing multiple Omada APs TP-Link Omada ER7206 — Multi-WAN VPN Router for complete Omada SDN setup TP-Link Omada EAP670 — Ceiling-mount Wi-Fi 6 AP for mixed deployment environments Downloads EAP650-Desktop Datasheet & Quick Installation Guide (TP-Link AU) Official Product Page — Omada Networks AU Frequently Asked Questions Does the EAP650-Desktop require a ceiling mount? No. It's designed specifically for desktop placement — simply set it on a desk, shelf, or counter. No drilling or ceiling infrastructure is needed. Can I manage the EAP650-Desktop without a hardware controller? Yes. You can manage it via the free Omada Software Controller (installed on a PC or server), the Omada Cloud, or the Omada mobile app. A hardware controller such as the OC200 is optional but recommended for larger deployments. Does it support PoE? What switch do I need? Yes, it supports PoE+ (802.3at, up to 25.5W). You'll need a PoE+ capable switch or injector. Alternatively, it can be powered via the included DC 12V/1.5A adapter. Is the EAP650-Desktop compatible with my existing Omada network? Yes. It integrates seamlessly with any Omada SDN deployment running compatible firmware and controller versions. Check the TP-Link compatibility matrix for your specific controller version. How many devices can connect at once? The EAP650-Desktop supports up to 300 concurrent wireless clients, making it suitable for medium-density environments. Does it support guest Wi-Fi? Yes. You can configure up to 16 SSIDs (8 per band), including isolated guest networks with captive portal support via the Omada controller.

  Read more less

   

  $208.62

• 

  TP-Link TP-Link Deco X50-DSL AX3000 Wi-Fi 6 Modem Router with Mesh – 1-Pack

   

  TP-Link Deco X50-DSL AX3000 Wi-Fi 6 Modem Router with Mesh Simplify your home network with the Deco X50-DSL — a powerful all-in-one AX3000 Wi-Fi 6 modem router that replaces both your NBN modem and wireless router in a single, elegant unit. With a built-in VDSL2/ADSL2+ modem, seamless mesh expansion capability, and support for up to 150 devices, the X50-DSL is purpose-built for Australian FTTN, FTTB, and ADSL broadband connections. Add more Deco units at any time to extend coverage throughout your entire home. Key Features Built-In VDSL2/ADSL2+ Modem — Connects directly to your phone line for FTTN, FTTB, and ADSL NBN connections — no separate modem required. AX3000 Dual-Band Wi-Fi 6 — Up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz for fast, reliable whole-home wireless. Mesh-Ready — Pair with additional Deco units to eliminate dead zones and extend coverage across larger homes. Gigabit WAN/LAN Ports — Dual Gigabit ports for flexible wired connectivity and Ethernet backhaul. OFDMA & MU-MIMO — Efficiently manages multiple devices simultaneously for smooth streaming, gaming, and browsing. Seamless Roaming — Automatically hands off devices to the strongest Deco node as you move around your home. HomeShield Security — Built-in network protection with parental controls, IoT device management, and real-time threat detection. WPA3 Encryption — Latest wireless security standard for enhanced network protection. Works with Alexa — Voice control for basic network functions. Deco App — Easy setup and full network management from iOS or Android. Ideal Use Cases FTTN or FTTB NBN customers wanting to replace their ISP-supplied modem router with a premium Wi-Fi 6 alternative ADSL households upgrading to faster, more reliable wireless without changing their broadband connection type Homes with 50–150 connected devices including smart TVs, security cameras, and IoT devices Users wanting a single app to manage their modem, router, and mesh network Renters or homeowners who cannot run Ethernet cabling and need strong wireless backhaul Technical Specifications Specification Details Wi-Fi Standard IEEE 802.11ax/ac/n/g/b/a (Wi-Fi 6) Wi-Fi Speed AX3000 — 574Mbps (2.4GHz) + 2402Mbps (5GHz) Frequency Bands Dual-Band (2.4GHz + 5GHz) Modem Type VDSL2 / ADSL2+ built-in DSL Standards VDSL2 (Profile 17a/35b), ADSL/ADSL2/ADSL2+ WAN Port 1× Gigabit WAN (for FTTP/HFC/Ethernet WAN) LAN Ports 1× Gigabit LAN DSL Port 1× RJ11 (phone line) MU-MIMO 4×4 (5GHz), 2×2 (2.4GHz) OFDMA Yes (Uplink & Downlink) Processor 1.5GHz Dual-Core CPU RAM / Flash 512MB RAM / 128MB Flash Security WPA3, WPA2, HomeShield Mesh Compatibility All Deco models Smart Home Works with Amazon Alexa App Deco (iOS & Android) Power 12V/2A (included) Dimensions 130 × 130 × 36mm Colour White Recommended Accessories Deco X50 Pro (Add-On Unit) — Expand your mesh network with additional Deco nodes to cover larger homes or outbuildings. Deco X55 or Deco XE75 — Compatible Deco units to extend your network with tri-band or Wi-Fi 6E capability. TP-Link TL-SG105 Gigabit Switch — Add wired ports for desktop PCs, smart TVs, or NVRs connected to the Deco X50-DSL. RJ11 DSL Filter / Splitter — Required for ADSL connections where voice and broadband share the same phone line. Frequently Asked Questions Is the Deco X50-DSL compatible with Australian NBN FTTN connections? Yes. The Deco X50-DSL has a built-in VDSL2 modem that connects directly to your NBN FTTN or FTTB connection via the RJ11 phone line port. No separate modem is needed. It also supports a Gigabit WAN port for FTTP, HFC, or Ethernet WAN connections. Can I use the Deco X50-DSL with my existing Deco units? Yes. The X50-DSL is fully compatible with all other Deco models. It acts as the primary node (modem + router) while additional Deco units extend coverage as satellite nodes throughout your home. Does it support VDSL2 Profile 35b (Super Vectoring)? Yes. The Deco X50-DSL supports VDSL2 profiles 17a and 35b, making it compatible with high-speed FTTN connections that use vectoring and super vectoring technology. Do I need a separate modem for FTTP or HFC NBN? No separate modem is needed for any connection type. For FTTP and HFC, connect your NBN connection box to the Gigabit WAN port. For FTTN and FTTB, connect directly to the RJ11 DSL port. How many devices can the Deco X50-DSL support? The Deco X50-DSL supports up to 150 connected devices across the mesh network, making it well-suited for smart homes with cameras, IoT devices, phones, laptops, and streaming devices. Is HomeShield free to use? Basic HomeShield features — including parental controls and network security scanning — are included at no cost. A HomeShield Pro subscription unlocks advanced reporting, content filtering categories, and real-time threat intelligence. Can I manage the Deco X50-DSL remotely? Yes. The Deco app (iOS and Android) allows you to monitor your network, run speed tests, manage connected devices, set parental controls, and configure guest networks from anywhere with an internet connection.

  Read more less

   

  $314.76

• 

  TP-Link TP-Link Archer TX20UH AX1800 High Gain Wi-Fi 6 USB Adapter

   

  TP-Link Archer TX20UH AX1800 High Gain Wi-Fi 6 USB Adapter The TP-Link Archer TX20UH is an AX1800 dual-band Wi-Fi 6 USB adapter that upgrades any desktop or laptop to the latest wireless standard without opening the case. With high-gain adjustable antennas, Beamforming technology, and a 1.2-metre USB 3.0 cable for flexible positioning, it delivers fast, stable Wi-Fi 6 connectivity from wherever you need it in your home or office — ideal for Australians looking to get more from their Wi-Fi 6 router without replacing their PC. Key Features AX1800 Wi-Fi 6 Speed — Up to 1201Mbps on 5GHz and 574Mbps on 2.4GHz for combined wireless throughput of 1800Mbps — significantly faster than Wi-Fi 5 adapters. High-Gain Adjustable Antennas — Multi-angle adjustable antennas extend Wi-Fi range and improve signal reception, particularly in larger homes or through walls and floors. Beamforming Technology — Concentrates Wi-Fi signals towards your router for a stronger, more reliable connection from greater distances. OFDMA & MU-MIMO — Reduces latency and improves efficiency in multi-device environments — particularly beneficial for online gaming and video calls. USB 3.0 with 1.2m Cable — SuperSpeed USB 3.0 (up to 4.8Gbps transfer) with a 1.2-metre cable for flexible placement away from the PC — position the adapter for the best possible signal. Dual-Band Wi-Fi — Switch between 2.4GHz for range and 5GHz for speed depending on your environment and use case. WPA3 Security — Latest Wi-Fi security standard provides stronger, individualised encryption to protect your wireless connection. Backward Compatible — Supports 802.11ac/a/b/g/n for use with older Wi-Fi 5 and Wi-Fi 4 routers. Plug & Play — No tools or case opening required; simply plug into any available USB port and install the driver. Use Cases Desktop PCs without a built-in wireless card needing Wi-Fi 6 connectivity Laptops with a weak or failed internal Wi-Fi card requiring an external upgrade Home office setups where the PC is far from the router and signal strength is poor Gaming PCs requiring lower latency wireless without running an Ethernet cable Upgrading from Wi-Fi 5 (AC) to Wi-Fi 6 (AX) to match a new router without replacing the PC Technical Specifications Specification Detail Model Archer TX20UH Interface USB 3.0 (backward compatible with USB 2.0) Cable Length 1.2 metres Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/a/b/g/n) Combined Speed AX1800 — 1201Mbps (5GHz) + 574Mbps (2.4GHz) Frequency Bands Dual-band: 2.4GHz & 5GHz Antennas High-gain, multi-angle adjustable external Beamforming Yes OFDMA Yes MU-MIMO Yes Security WPA3 / WPA2 / WPA / WEP USB Transfer Speed Up to 4.8Gbps (USB 3.0) OS Compatibility Windows 11 / 10 / 8.1 / 7; macOS 10.9–10.15 Weight Approx. 240g Warranty 2 Years Recommended Accessories TP-Link Archer AX73 Wi-Fi 6 Router — Pair with the TX20UH to build a complete AX Wi-Fi 6 home network and unlock the full AX1800 performance. TP-Link TL-WA3001 AX3000 Wi-Fi 6 Access Point — Extend Wi-Fi 6 coverage to the room where your PC is located for a stronger signal to the TX20UH. USB 3.0 Extension Cable — If additional cable length is needed beyond the included 1.2m for optimal antenna positioning. Downloads Archer TX20UH Datasheet (PDF) Frequently Asked Questions Does the Archer TX20UH work with Wi-Fi 5 (AC) routers? Yes. The TX20UH is backward compatible with 802.11ac (Wi-Fi 5), 802.11n (Wi-Fi 4), and older standards. You’ll still benefit from the high-gain antennas and improved range, though the full AX1800 Wi-Fi 6 speeds require a Wi-Fi 6 router. Can I use this adapter with a laptop? Yes. The TX20UH connects via USB 3.0 and works with any laptop or desktop that has an available USB port. The 1.2-metre cable allows you to position the adapter and its antennas for the best possible signal, rather than being limited to the USB port location. Why is the USB cable useful for a Wi-Fi adapter? Most USB Wi-Fi adapters plug directly into the back of a desktop PC, where the case itself can block or degrade the signal. The TX20UH’s 1.2-metre cable lets you place the adapter on your desk or at a height where the antennas have a clear line of sight to your router — significantly improving signal strength and stability. Does it support 160MHz channel width? The TX20UH supports up to 80MHz channel width on the 5GHz band for AX1800 operation. For 160MHz support, consider the Archer TX55E PCIe adapter, which uses an Intel Wi-Fi 6 chipset with 160MHz capability. What operating systems are supported? The Archer TX20UH supports Windows 11, 10, 8.1, and 7, as well as macOS 10.9 through 10.15. Linux is not officially supported. Will this reduce latency for online gaming? Yes. The TX20UH’s OFDMA technology reduces network latency compared to Wi-Fi 5, and the high-gain antennas with Beamforming provide a more stable connection — both of which contribute to a more responsive gaming experience, provided your router also supports Wi-Fi 6.

  Read more less

   

  $49.00

• 

  TP-Link TP-Link Archer TX55E AX3000 Wi-Fi 6 Bluetooth 5.2 PCIe Adapter

   

  TP-Link Archer TX55E AX3000 Wi-Fi 6 Bluetooth 5.2 PCIe Adapter The TP-Link Archer TX55E is an AX3000 dual-band Wi-Fi 6 PCIe adapter that upgrades any desktop PC to the latest wireless standard — delivering combined speeds up to 2976Mbps, 75% lower latency via OFDMA, and Bluetooth 5.2 connectivity, all from a single PCIe card. Powered by an Intel Wi-Fi 6 chipset and built with a gold-plated heatsink design, it’s engineered for gamers, streamers, and power users who demand fast, stable wireless performance from their desktop. Key Features AX3000 Wi-Fi 6 Speed — Up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz for combined wireless throughput that breaks the Gigabit barrier. Intel Wi-Fi 6 Chipset — Industry-leading chipset delivers faster, more reliable Wi-Fi and fully unlocks the performance of your Wi-Fi 6 router. 160MHz Channel Width & 1024-QAM — Maximises throughput on compatible Wi-Fi 6 routers for peak real-world speeds. 75% Lower Latency with OFDMA — Reduces lag for ultra-responsive online gaming, VR, and real-time video calls. MU-MIMO — Allows simultaneous data streams to multiple devices, reducing congestion on busy networks. Bluetooth 5.2 — 2× faster and 4× broader coverage than Bluetooth 4.2 for seamless connection to controllers, headsets, keyboards, and other peripherals. Two High-Gain External Antennas — Extend Wi-Fi range and improve signal stability, particularly in larger homes or through walls. WPA3 Security — Latest Wi-Fi security standard provides stronger, individualised encryption to protect your connection. Gold-Plated Contacts & Heatsink — Resists oxidation and maintains stable performance even under sustained load in warm environments. Backward Compatible — Supports 802.11ac/a/b/g/n for use with older Wi-Fi 5 and Wi-Fi 4 routers. Use Cases Desktop gaming PCs requiring low-latency Wi-Fi 6 without running an Ethernet cable Home office desktops needing fast, reliable wireless for video conferencing and large file transfers Media and streaming PCs used for 4K content, live streaming, or cloud gaming Desktop PCs in rooms where Ethernet cabling is impractical or not available Upgrading an older desktop from Wi-Fi 5 (AC) to Wi-Fi 6 (AX) to match a new router Technical Specifications Specification Detail Model Archer TX55E Interface PCIe (desktop PC) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/a/b/g/n) Combined Speed AX3000 — 2402Mbps (5GHz) + 574Mbps (2.4GHz) Chipset Intel Wi-Fi 6 Channel Width 20/40/80/160MHz Modulation 1024-QAM OFDMA Yes (Uplink & Downlink) — 75% lower latency MU-MIMO Yes Bluetooth Bluetooth 5.2 Antennas 2 × External High-Gain Security WPA3 / WPA2 / WPA / WEP Build Gold-plated contacts; heatsink for thermal stability OS Compatibility Windows 11 / 10 (64-bit) Weight Approx. 220g Warranty 2 Years Recommended Accessories TP-Link Archer AX73 Wi-Fi 6 Router — Pair with the TX55E to build a complete AX Wi-Fi 6 home network and unlock the full 160MHz channel width performance. TP-Link TL-WA3001 AX3000 Wi-Fi 6 Access Point — Extend Wi-Fi 6 coverage to additional areas of your home or office to keep the TX55E connected at full speed. PCIe Riser Extension Cable — Useful for repositioning the card in compact PC cases where antenna placement is restricted. Downloads Archer TX55E Datasheet (PDF) Frequently Asked Questions Does the Archer TX55E work with Wi-Fi 5 (AC) routers? Yes. The TX55E is backward compatible with 802.11ac (Wi-Fi 5), 802.11n (Wi-Fi 4), and older standards. You’ll still benefit from the improved hardware quality and Bluetooth 5.2, though the full AX3000 Wi-Fi 6 speeds require a Wi-Fi 6 router. Is a PCIe slot required to install this adapter? Yes. The TX55E uses a PCIe interface and requires an available PCIe slot in your desktop PC motherboard. It is not compatible with laptops or all-in-one PCs. Does it support 160MHz channel width? Yes. The TX55E supports 160MHz channel width on the 5GHz band, which is required to achieve the maximum 2402Mbps speed. Your Wi-Fi 6 router must also support 160MHz for this to apply. What operating systems are supported? The Archer TX55E supports Windows 11 and Windows 10 (64-bit). macOS and Linux are not officially supported. Does the Bluetooth 5.2 require a separate antenna? No. The TX55E’s two external antennas handle both Wi-Fi and Bluetooth signals. No additional antenna or hardware is required for Bluetooth functionality. Will this reduce latency for online gaming? Yes. The TX55E’s OFDMA technology reduces network latency by up to 75% compared to Wi-Fi 5, making it noticeably more responsive for competitive online gaming, VR, and real-time applications — provided your router also supports Wi-Fi 6 OFDMA.

  Read more less

   

  $58.00

• 

  TP-Link TP-Link Deco X50-PoE AX3000 Mesh Wi-Fi 6 System with PoE (2-Pack)

   

  Whole-Home Mesh Wi-Fi 6 with PoE Power and Flexible Mounting The TP-Link Deco X50-PoE is an AX3000 dual-band Wi-Fi 6 mesh node that can be powered via PoE — making it as easy to deploy as an IP camera. With a 2.5Gbps multi-gig port, ceiling and wall mounting options, and seamless AI-driven mesh roaming, the 2-pack delivers fast, reliable whole-home Wi-Fi coverage for homes and small businesses across Australia. Whether you're replacing a single router or building a professional wireless network, the Deco X50-PoE scales to suit. Key Features AX3000 Wi-Fi 6 Speeds: 2402Mbps on 5GHz and 574Mbps on 2.4GHz — ideal for 4K/8K streaming, cloud gaming, video conferencing, and homes with many connected devices. PoE Powered: Each Deco X50-PoE node can be powered via a single Ethernet cable from a PoE switch — no power outlet required at the installation point. Also supports DC power adapter for flexible placement. 2.5Gbps Multi-Gig Port: Breaks through the 1Gbps bottleneck with a 2.5GbE wired port for backhaul or high-speed wired device connections, plus one additional Gigabit port. Flexible Installation: Mount on a ceiling, wall, or junction box, or place on a tabletop — adaptive mounting accessories included. Ideal for professional installations in offices, retail stores, and homes. Seamless AI-Driven Mesh Roaming: Deco nodes intelligently learn your network environment and automatically connect your devices to the strongest signal as you move through your home — one network name, zero dead zones. TP-Link HomeShield: Built-in network security with real-time threat detection, robust parental controls, and IoT device protection. Basic features free; advanced features via HomeShield Pro subscription. Expandable Mesh System: Add more Deco nodes at any time to extend coverage. All Deco models are cross-compatible and work together in a single mesh network. Voice Control: Works with Amazon Alexa and Google Assistant for hands-free network management. Universal Compatibility: Backwards compatible with all Wi-Fi generations (Wi-Fi 5, 4, and older) and works with any NBN connection type and modem. Deco App Management: Set up and manage your entire mesh network from the free Deco app on iOS or Android — including guest networks, device prioritisation, and parental controls. Common Use Cases Whole-home Wi-Fi 6 coverage for 3–5 bedroom homes with many connected devices Professional ceiling or wall-mounted Wi-Fi deployments in offices, retail stores, and hospitality venues PoE-powered wireless access point installations using an existing PoE switch infrastructure 4K/8K streaming, cloud gaming, and video conferencing households Smart home networks with many IoT devices requiring reliable, high-capacity Wi-Fi Expanding existing Deco mesh networks with additional nodes Technical Specifications Model Deco X50-PoE (2-Pack) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a/b/g) Wi-Fi Speed AX3000: 5GHz 2402Mbps + 2.4GHz 574Mbps 5GHz Band 2402Mbps (802.11ax) 2.4GHz Band 574Mbps (802.11ax) 2.5GbE Port 1× (PoE input or wired backhaul/device) Gigabit Port 1× PoE Input Yes (802.3at PoE+, via 2.5GbE port) DC Power Yes (adapter included) Mounting Options Ceiling, wall, junction box, tabletop Key Technologies OFDMA, MU-MIMO, Beamforming, TWT, AI Mesh Mesh System TP-Link Deco (all Deco models compatible) Security WPA3, WPA2, TP-Link HomeShield Voice Control Amazon Alexa, Google Assistant App Management TP-Link Deco (iOS & Android) Pack Contents 2× Deco X50-PoE nodes, 2× power adapters, mounting accessories Downloads Deco X50-PoE Datasheet (PDF) Frequently Asked Questions What PoE standard does the Deco X50-PoE support? The Deco X50-PoE is powered via 802.3at PoE+ (up to 30W) through its 2.5GbE port. Ensure your PoE switch supports 802.3at on the port connected to the Deco. Standard 802.3af (15.4W) PoE may not provide sufficient power. Can I use it as a ceiling-mounted access point? Yes. The Deco X50-PoE is specifically designed for ceiling and wall mounting, with mounting accessories included in the box. When powered via PoE, a single Ethernet cable provides both data and power — making it a clean, professional installation with no visible power cables. Does it work with my existing NBN connection? Yes. The Deco X50-PoE is compatible with all NBN connection types including FTTP, FTTC, FTTN, FTTB, and HFC. Connect the primary Deco node to your NBN modem or connection box, then place additional nodes throughout your home for seamless mesh coverage. Can I mix the Deco X50-PoE with other Deco models? Yes. All TP-Link Deco models are cross-compatible and can be combined in a single mesh network. You can add Deco X50-PoE nodes to an existing Deco system, or mix them with other Deco models to extend coverage in different areas. What is the difference between the Deco X50-PoE and a standard wireless router? A standard router provides Wi-Fi from a single point, which can result in dead zones in larger homes. The Deco X50-PoE is a mesh system — multiple nodes work together to blanket your entire home in a single, seamless Wi-Fi network with automatic roaming. The PoE capability also allows professional ceiling or wall mounting without needing a power outlet at the installation point. How many Deco nodes do I need for my home? The 2-pack is typically sufficient for homes up to approximately 400–500m² depending on layout and construction materials. For larger homes or multi-storey buildings, additional Deco nodes can be added at any time to extend coverage.

  Read more less

   

  $439.00

• 

  TP-Link TP-Link Deco X50-PoE AX3000 Whole Home Mesh Wi-Fi 6 System with PoE (3-Pack)

   

  TP-Link Deco X50-PoE AX3000 Whole Home Mesh Wi-Fi 6 System with PoE (3-Pack) Professional PoE-Powered Mesh Wi-Fi 6 — Ceiling, Wall, or Desktop The TP-Link Deco X50-PoE is an AX3000 dual-band Wi-Fi 6 mesh unit that can be powered via PoE or a DC adapter, and mounted on a ceiling, wall, or junction box — making it equally at home in professional commercial installations and residential deployments. The 3-pack delivers whole-home or whole-premises mesh coverage with a 2.5 Gbps wired port, AI-driven mesh optimisation, TP-Link HomeShield security, and seamless roaming under a single network name. Compatible with all Australian ISPs and every other Deco model. Key Features AX3000 dual-band Wi-Fi 6 — 2402 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz PoE powered (802.3af/at) — single Ethernet cable for data and power; DC adapter also included for flexible installation 1 × 2.5 Gbps port + 1 × Gigabit port — multi-gig wired connectivity breaks the 1G bottleneck Multiple mounting options — ceiling, wall, junction box, or desktop with included adaptive accessories AI-driven mesh — intelligently learns your network environment and optimises connections automatically Seamless roaming — single SSID with automatic band and AP steering as you move through your home or premises TP-Link HomeShield — comprehensive network protection, robust parental controls, and real-time IoT security OFDMA and MU-MIMO — efficient simultaneous transmission to multiple devices 1024-QAM — higher throughput for bandwidth-intensive applications Voice control via Amazon Alexa and Google Assistant Managed via the Deco app (iOS & Android) — step-by-step setup and remote management Compatible with all Deco models — expand coverage by adding any Deco unit to the mesh Use Cases Professional Commercial Installations: PoE power and ceiling/wall mounting make the X50-PoE ideal for offices, retail spaces, hospitality venues, and schools where a clean, cable-managed installation is required. Large Homes & Multi-Storey Properties: Three units provide robust whole-home mesh coverage, eliminating dead zones across larger floor plans and multiple levels. High-Device Environments: Wi-Fi 6 OFDMA handles dozens of simultaneous connections — smartphones, tablets, smart TVs, IP cameras, and IoT devices all at once. Home Offices & Remote Work: The 2.5G wired port and reliable Wi-Fi 6 coverage support video conferencing, large file transfers, and cloud applications without interruption. Families: HomeShield parental controls let you manage screen time and content filtering per device or profile, with real-time IoT security protecting smart home devices. Specifications Specification Detail Model Deco X50-PoE (3-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax) — AX3000 Dual-Band Wireless Speeds 2402 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz Wired Ports (per unit) 1 × 2.5 Gbps + 1 × 1 Gbps RJ45 Power Supply PoE (802.3af/at) or DC adapter (included) Mounting Ceiling, wall, junction box, or desktop Wi-Fi Technologies OFDMA, MU-MIMO, 1024-QAM, Beamforming, BSS Colour Mesh AI-driven — single SSID, seamless roaming, auto path selection Security WPA3, WPA2 — HomeShield (parental controls, antivirus, IoT protection) Voice Control Amazon Alexa, Google Assistant App Deco App (iOS & Android) Compatibility All Deco models, all Wi-Fi generations, all Australian ISPs Weight (3-pack) 2.86 kg Downloads Deco X50-PoE Datasheet (PDF) Frequently Asked Questions What PoE standard does the Deco X50-PoE support? The Deco X50-PoE supports IEEE 802.3af and 802.3at PoE standards. It can be powered directly from any 802.3af/at-compliant PoE switch or injector — including TP-Link’s TL-SG105PE, TL-SG2210MP, and TL-SG3210XHP-M2. A DC power adapter is also included for installations without PoE infrastructure. Can I mount the Deco X50-PoE on a ceiling? Yes. The Deco X50-PoE includes adaptive mounting accessories for ceiling, wall, and junction box installation. This makes it suitable for professional commercial deployments where a clean, overhead installation is preferred. Does the 2.5G port support PoE input or is it data only? The 2.5G port is the PoE input port — it receives both power and data from your PoE switch or injector. The Gigabit port is used for wired device connections or Ethernet backhaul to another Deco unit. Does the Deco X50-PoE work with my Australian ISP? Yes. The Deco X50-PoE is compatible with all major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and supports NBN FTTP, FTTN, FTTB, HFC, and fixed wireless connections. Can I mix the Deco X50-PoE with other Deco models? Yes. All Deco models are cross-compatible and can be added to the same mesh network. You can mix X50-PoE units with other Deco models to expand coverage or add PoE-powered nodes in specific locations while using DC-powered units elsewhere. What is TP-Link HomeShield? HomeShield is TP-Link’s built-in security suite that includes parental controls (per-device content filtering and time limits), real-time IoT device protection, and network security scanning. Basic HomeShield features are included free; advanced features are available via a HomeShield Pro subscription.

  Read more less

   

  $649.00

• 

  TP-Link TP-Link TL-WA1801 AX1800 Gigabit Wi-Fi 6 Access Point

   

  TP-Link TL-WA1801 — AX1800 Gigabit Wi-Fi 6 Access Point The TP-Link TL-WA1801 is a ceiling or wall-mountable Wi-Fi 6 access point that brings AX1800 dual-band wireless performance to homes, offices, cafes, and small business environments. With Passive PoE support for single-cable deployment, four operating modes, WPA3 security, and Captive Portal functionality, it’s a flexible and installer-friendly solution for upgrading existing networks to the latest generation of Wi-Fi across Australia. Key Features AX1800 Wi-Fi 6 Dual-Band: Combined wireless speeds of up to 1800 Mbps — 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz — for fast, reliable connectivity across multiple devices simultaneously. Passive PoE Powered: Supports Passive PoE for single-cable power and data delivery, simplifying installation in ceilings, walls, and locations without nearby power outlets. 4-in-1 Operating Modes: Supports Access Point, Range Extender, Multi-SSID, and Client modes — adaptable to a wide range of network configurations and deployment scenarios. Beamforming Technology: Four fixed antennas with Beamforming concentrate Wi-Fi signals towards connected devices, extending reliable coverage across larger spaces. WPA3 Security: The latest Wi-Fi security standard provides stronger encryption and enhanced protection against brute-force attacks for personal and business networks. Captive Portal: Built-in Captive Portal support enables a branded guest login page — ideal for cafes, salons, retail stores, and hospitality venues offering customer Wi-Fi. Gigabit Ethernet Port: A single Gigabit LAN/WAN port ensures full-speed wired backhaul and connectivity for wired devices. Multi-SSID Support: Broadcast multiple SSIDs to segment guest and staff networks without additional hardware. Easy Setup & Management: Configure and manage via the free TP-Link Tether app (iOS & Android) or the web management interface. Use Cases Office Wi-Fi Upgrades: Replace ageing access points with Wi-Fi 6 for faster speeds and better performance in high-device-density office environments. Cafes & Hospitality: Captive Portal and Multi-SSID make it ideal for venues offering branded guest Wi-Fi with network segmentation between staff and customers. Retail & Small Business: Single-cable PoE deployment keeps installations clean and cost-effective in shopfronts, reception areas, and open-plan spaces. Home Network Extension: Use in Range Extender or Access Point mode to eliminate Wi-Fi dead zones in larger homes or multi-storey properties. Education & Community Spaces: Multi-SSID and WPA3 security support segmented, secure wireless access for staff, students, and guests from a single device. Specifications Model TL-WA1801 Wi-Fi Standard Wi-Fi 6 (802.11ax) Wi-Fi Speed AX1800 — 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) Antennas 4 × Fixed External Antennas Ethernet Port 1 × Gigabit LAN/WAN Power Supply Passive PoE / DC Power Adapter Operating Modes Access Point, Range Extender, Multi-SSID, Client Beamforming Yes MU-MIMO Yes OFDMA Yes Security WPA3, WPA2, WPA, WEP Captive Portal Yes Multi-SSID Yes App Management TP-Link Tether (iOS & Android) Mounting Wall or Ceiling Mount (hardware included) Weight 880g Certifications CE, FCC, RoHS Frequently Asked Questions Does the TL-WA1801 support standard 802.3af/at PoE switches? The TL-WA1801 supports Passive PoE, not active IEEE 802.3af/at PoE. It requires a Passive PoE injector or a compatible Passive PoE switch. Using it with a standard 802.3af/at PoE switch without a Passive PoE injector may not power the device correctly. Check compatibility before installation. What is the difference between Access Point mode and Range Extender mode? In Access Point mode, the TL-WA1801 connects to your router via Ethernet and broadcasts a new Wi-Fi network — ideal for wired backhaul deployments. In Range Extender mode, it connects wirelessly to your existing router and rebroadcasts the signal to extend coverage — useful where running a cable is not practical. Can I use the Captive Portal for a cafe or retail store? Yes. The built-in Captive Portal allows you to create a branded guest login page where customers must accept terms or view a message before accessing the internet. It’s well suited to cafes, salons, retail stores, and any venue offering customer-facing Wi-Fi. How many SSIDs can the TL-WA1801 broadcast? The TL-WA1801 supports Multi-SSID mode, allowing multiple separate wireless networks to be broadcast from a single device — useful for separating guest and staff networks without additional hardware. Is the TL-WA1801 compatible with the TP-Link Omada SDN platform? No. The TL-WA1801 is managed via the TP-Link Tether app or web interface and is not part of the Omada SDN ecosystem. For centralised multi-AP management via Omada Controller, consider TP-Link’s Omada EAP access point range instead. Can the TL-WA1801 be ceiling mounted? Yes. The TL-WA1801 supports both wall and ceiling mounting. Mounting hardware is included in the box, and the compact design blends into most commercial and residential interiors. Downloads 📄 TL-WA1801 Datasheet (PDF)

  Read more less

   

  $129.00

• 

  TP-Link TP-Link TL-WA3001 AX3000 Gigabit Wi-Fi 6 Access Point

   

  TP-Link TL-WA3001 AX3000 Gigabit Wi-Fi 6 Access Point The TP-Link TL-WA3001 is a dual-band Wi-Fi 6 (802.11ax) access point delivering combined speeds of up to 3000Mbps across 2.4GHz and 5GHz bands. Designed for homes, small businesses, and commercial deployments across Australia, it supports Passive PoE for single-cable installation, four operating modes for flexible network integration, and a built-in captive portal for guest Wi-Fi management — all in a compact, wall or ceiling-mountable form factor. Key Features AX3000 Dual-Band Wi-Fi 6 — Up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz for fast, reliable connectivity across multiple devices simultaneously. Wi-Fi 6 (802.11ax) Technology — OFDMA and MU-MIMO reduce congestion and improve efficiency in high-density environments with many connected devices. Passive PoE Support — Powers and connects via a single Ethernet cable, enabling clean, flexible installation without a power outlet at the mounting point. Four Operating Modes — Supports Access Point, Range Extender, Multi-SSID, and Client modes to suit a wide range of network configurations. Beamforming Technology — Four fixed external antennas focus Wi-Fi signals towards connected devices for extended range and stronger signal strength. Captive Portal — Create a branded guest Wi-Fi login page with custom terms, advertisements, or marketing messages — ideal for cafés, salons, and retail businesses. Gigabit Ethernet Port — Full-speed wired backhaul ensures the access point doesn’t bottleneck your internet connection. Multi-SSID Support — Broadcast multiple separate Wi-Fi networks from a single device for staff, guest, and IoT device segmentation. Use Cases Small offices and meeting rooms requiring a dedicated Wi-Fi 6 access point separate from the main router Cafés, restaurants, and retail stores needing a branded captive portal for guest Wi-Fi Warehouses and large residential properties extending Wi-Fi coverage to dead zones via Range Extender mode Security and AV installers adding a Wi-Fi 6 AP to an existing wired network infrastructure Multi-tenant buildings or strata properties deploying segmented SSIDs for different users or floors Technical Specifications Specification Detail Model TL-WA3001 Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a on 5GHz; 802.11ax/n/b/g on 2.4GHz) Combined Speed AX3000 — up to 3000Mbps (574Mbps @ 2.4GHz + 2402Mbps @ 5GHz) Frequency Bands Dual-band: 2.4GHz & 5GHz Antennas 4 × Fixed External with Beamforming Ethernet Port 1 × Gigabit RJ45 Power Supply Passive PoE or DC power adapter (included) Operating Modes Access Point / Range Extender / Multi-SSID / Client OFDMA Yes (Uplink & Downlink) MU-MIMO Yes (2×2 UL/DL) Captive Portal Yes — customisable guest login page Multi-SSID Yes Mounting Wall or ceiling mount (hardware included) Weight Approx. 1.14 kg Warranty 2 Years Recommended Accessories TP-Link TL-POE260S 2.5G PoE+ Injector — Powers the TL-WA3001 via Passive PoE from a non-PoE switch or router using a single Ethernet cable. TP-Link TL-SG108PE 8-Port PoE Switch — For multi-AP deployments, a PoE switch powers and connects multiple access points from a central location. Cat6 Ethernet Cable — Recommended for reliable Gigabit backhaul and PoE power delivery to the access point. TP-Link Omada Controller (OC200) — For centralised management of multiple TL-WA3001 units across a site, including roaming, VLAN, and captive portal configuration. Downloads TL-WA3001 Datasheet (PDF) Frequently Asked Questions Does the TL-WA3001 require a PoE switch to install? No. The TL-WA3001 supports Passive PoE and also includes a DC power adapter, so it can be powered from a standard power outlet if a PoE switch or injector is not available. For the cleanest single-cable installation, a Passive PoE injector such as the TL-POE260S is recommended. What is the difference between Access Point mode and Range Extender mode? In Access Point mode, the TL-WA3001 connects to your router via Ethernet and broadcasts a new Wi-Fi network — this is the recommended mode for most installations. In Range Extender mode, it connects wirelessly to an existing Wi-Fi network and rebroadcasts it to extend coverage, though this typically reduces throughput by approximately half. Can I manage multiple TL-WA3001 units centrally? Yes. The TL-WA3001 is compatible with TP-Link’s Omada SDN platform. Using the Omada Controller (hardware or software), you can manage multiple APs centrally, configure seamless roaming, set up VLANs, and customise captive portal pages across an entire site. What is the captive portal used for? The captive portal displays a custom login or landing page when a guest connects to your Wi-Fi network. It’s commonly used by cafés, hotels, and retail stores to require customers to accept terms of use, view an advertisement, or enter a voucher code before gaining internet access. Is the TL-WA3001 compatible with Wi-Fi 5 and older devices? Yes. Wi-Fi 6 is backward compatible with Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n), and older standards. All existing devices will connect and benefit from the improved network efficiency of Wi-Fi 6, even if they don’t support the full AX3000 speeds. Can I use this access point outdoors? The TL-WA3001 is designed for indoor use. For outdoor Wi-Fi coverage, TP-Link’s Omada outdoor access point range (e.g. EAP225-Outdoor or EAP610-Outdoor) is recommended.

  Read more less

   

  $159.00

• 

  TP-Link TP-Link AXE16000 Quad-Band Wi-Fi 6E Router - Archer AXE300

   

  TP-Link AXE16000 Quad-Band Wi-Fi 6E Router - Archer AXE300 Our Fastest Wi-Fi 6E and Wi-Fi 6 Router to Date: Up to 15.6 Gbps Quad-Band WiFi for faster browsing, streaming, and downloading, all at the same time. WiFi 6E Unleashed: The brand new 6 GHz band brings more bandwidth, faster speeds, and near-zero latency. Two 10G Ports: 1× 10 Gbps WAN/LAN port + 1× 10 Gbps Ethernet/Fiber Combo WAN/LAN port + 1× 2.5 Gbps WAN/LAN port + 4× Gigabit LAN ports + 1× USB 3.0 port ensure max flexibility and boosted throughput. Powerful CPU: 2.0 GHz quad-core processor and 1 GB RAM ensure fast transmission speeds and smooth operation of numerous devices and applications. Maximised Coverage: 8× high-performance dual-band antennas along with Beamforming boost WiFi signals throughout your home. More Devices with Less Lag: OFDMA and MU-MIMO technology deliver data to multiple devices, simultaneously. TP-Link HomeShield: Enhanced security defends against the latest cyber threats. WiFi 6E: A Freer and Faster FutureWiFi 6E introduces the brand new 6 GHz band without any overlap or interference from other bands and older devices. This means a congestion-free frequency that offers more bandwidth, faster speed, and lower latency.Two 10G Multi-gig PortsEquipped with two 10G WAN/LAN ports—one RJ45 port and an RJ45/SFP+ combo port—Archer AXE300 provides flexible support for both fibre and copper connections. WAN/LAN options and flexible 10 Gbps, 2.5 Gbps, and 1 Gbps ports make it an ideal solution for future-proofing your home network. Its USB 3.0 port offers up to 10× faster transfer speeds than USB 2.0.Industry-Leading CPU, Powerful ProcessingThe state-of-the-art 2.0 GHz quad-core 64-bit CPU with 1 GB RAM handles huge throughput to eliminate lag. Enjoy fast connections and minimal latency even under the heaviest transmission loads.Massively Expanded Device CapacityThe number of IoT devices today creates greater demands on home networks. Archer AXE300 future-proofs your home WiFi with a higher capacity of up to 200+ devices.TP-Link OneMesh™ :Flexible Create Whole Home WiFi with Archer AXE300OneMesh™ is a simple way to form a mesh network with a single WiFi name for seamless whole-home coverage. Just connect an OneMesh™ range extender to an OneMesh™ router. No more searching for a stable connection.Your Security is Our PriorityWith TP-Link HomeShield, enjoy advanced security features that deliver a safe environment that protects your family and network's data and privacy.VPN Clients and Server SupportedAllow devices in your home network to access remote VPN servers without needing to install VPN software on every device. Archer AXE300 can run both the VPN and ordinary internet connections simultaneously, delivering security and flexibility.Easy Setup and UseWhether you prefer the intuitive Tether app or TP-Link’s powerful web interface, you can set up your Archer axe300 in minutes. The Tether app allows you to manage network settings from Android or iOS devices.New Connection NotificationsYou will be notified by your phone when new devices connect. Kick-off any suspicious connections and block them. It’s as simple as that.Easy Firmware UpgradesTired of upgrading firmware manually? OTA updates simplify firmware upgrades with a click in the management panel. To keep your security and functions always up to date, just turn on the auto schedule. DownloadDatasheet

  Read more less

   

  $899.00

• Save -$183.00

  Ubiquiti Ubiquiti Switch Enterprise 48-port PoE+ 48x2.5GbE Ports, Ideal For Wi-Fi 6 AP, 4x 10g SFP+ Ports For Uplinks, Managed Layer 3 Switch

   

  The Switch Enterprise 48 PoE (USW Enterprise 48 PoE) is a fully managed switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports, (4) 10G SFP+ ports, and a 720W total PoE supply. Along with its Layer 3 functionality, this switch offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate).The USW Enterprise 48 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the USW Enterprise 48 PoE offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (48) 2.5GbE, 802.3at PoE+ RJ45 ports (4) 10G SFP+ ports (1) USP RPS DC input 720W total PoE supply Layer 3 switching features Mechanical Dimensions 442 x 44 x 400 mm (17.4 x 1.7 x 15.7") Weight Without Mount: 6.2 kg (13.67 lb) With Mount: 6.3 kg (13.89 lb) Enclosure Material SGCC Steel Mount Material SGCC Steel Hardware Total Non-Blocking Throughput 160 Gbps Switching Capacity 320 Gbps Forwarding Rate 238.095 Mpps Max Power Consumption (Excluding PoE Output) 150W Power Method (1) Universal AC input, 100-240VAC, 10A Max, 50/60 Hz (1) USP-RPS DC input, 52VDC, 13.84A; 11.5VDC, 13A Power Supply AC/DC, Internal, 100-240V, 10A Max. Management Interface Ethernet In-Band Networking Interfaces (48) 100MbE/1GbE/2.5GbE RJ45 port SFP+ Interfaces (4) 1/10G SFP+ ports PoE Interfaces (48) PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) Total Available PoE 720W Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range 802.3af Mode 44 to 57V Voltage Range 802.3at Mode 50 to 57V Services SMB Layer 3 PoE Gigabit Ethernet Switch ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Downloads Datasheet Installation Guide

  Read more less

   

  $3,268.99 $3,085.99

• Save -$174.60

  Ubiquiti Ubiquiti Amplifi Alien Mesh System - Wi-Fi 6 - Includes 1x Alien Mesh Point, 4x Gigabit Ethernet Ports on Router, Touch Screen Display

   

  With the latest 802.11ax WiFi 6 technology, AmpliFi Alien delivers 4x the overall network capacity and 2x the coverage while reaching true gigabit speeds.It features a dual-band radio with 2.4 GHz and 5 GHz 802.11ax radios optimized for WiFi 6 performance and backward compatibility with previous WiFi standards.This combination pack comprises one AmpliFi Alien Router and one Amplifi Alien MeshPoint. The MeshPoint expands wireless range coverage and includes a Gigabit Ethernet port to extend wired connectivity.Features: WiFi 6 performance 5 GHz 8x8 WiFi 6 radio (Max. aggregate speed: 4804 Mbps) 2.4 GHz 4x4 Wi-Fi 6 radio (Max. aggregate speed: 1148 Mbps) 160 MHz bandwidth and DFS channel support Router with 4-Port Gigabit Ethernet switch MeshPoint with (1) Gigabit Ethernet port Touchscreen display on Router Includes AmpliFi Teleport configuration-free VPN solution

  Read more less

   

  $1,384.60 $1,210.00

• Save -$630.00

  Ubiquiti Ubiquiti AmpliFi Alien Wi-Fi 6 Mesh Router — 16-Stream Tri-Band, 4x Gigabit LAN, Touchscreen (AFi-ALN-R)

   

  Ubiquiti — NDAA Compliant AmpliFi Alien Wi-Fi 6 Mesh Router — 16-Stream Tri-Band, 4x Gigabit LAN, Touchscreen (AFi-ALN-R) The Ubiquiti AmpliFi Alien (AFi-ALN-R) is a flagship whole-home Wi-Fi 6 mesh router that delivers true gigabit wireless from a single, beautifully designed unit. With a tri-band 802.11ax radio architecture — a 4x4 2.4 GHz radio plus 4x4 and 8x8 5 GHz radios — the Alien combines 16 spatial streams of capacity, a 4.7″ colour touchscreen, and a built-in 4-port Gigabit switch. Whether you're covering a large home, a multi-storey house, or a busy home office anywhere in Australia, the AmpliFi Alien brings enterprise-grade Wi-Fi performance with effortless app setup and no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Wi-Fi Wi-Fi 6 / 802.11ax Top Speed 4804 Mbps Wired Ports 4x Gigabit LAN Display 4.7″ Touchscreen Why Choose the AmpliFi Alien? True Wi-Fi 6 Gigabit Speeds The 8x8 high-band 5 GHz 802.11ax radio reaches up to 4804 Mbps, with the 2.4 GHz radio adding up to 1148 Mbps to clients — lag-free, low-latency performance for streaming, gaming, and video calls. 16-Stream Tri-Band Architecture A 4x4 2.4 GHz radio plus 4x4 (low-band) and 8x8 (high-band) 5 GHz radios deliver up to 16 spatial streams, so dozens of devices stay fast at once with MU-MIMO and OFDMA. Effortless Mesh Expansion Start with one Alien and add more routers as MeshPoints to extend gigabit coverage across the largest homes — there's no limit to how many Alien units you can mesh together. Built-In 4-Port Gigabit Switch Four Gigabit Ethernet LAN ports plus a Gigabit WAN port let you hard-wire TVs, consoles, NAS, and PCs directly at the router for the most reliable connection. 4.7″ Colour Touchscreen A full-colour 4.7″ touchscreen display (274 × 1268, 279 ppi) shows live connection info, speed-test results, and network status at a glance — no app required to check your network. Simple App Control & Teleport VPN The AmpliFi app handles instant setup, device management, family profiles, and guest access — plus free AmpliFi Teleport zero-config VPN to access your home network securely while travelling. Powerful Quad-Core Engine A Quad-Core ARM Cortex-A53 at 2.2 GHz with 1 GB DDR3L memory drives advanced QoS, VLANs, guest isolation, and IPv6 without slowing your throughput. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model AFi-ALN-R (AmpliFi Alien Router) Wi-Fi Standards Up to Wi-Fi 6 (802.11ax), backward compatible a/b/g/n/ac Radio Configuration 2.4 GHz 4x4 • 5 GHz 4x4 (low band) + 8x8 (high band) Max Wireless Speed (to clients) 2.4 GHz: 1148 Mbps • 5 GHz: up to 4804 Mbps (802.11ax) Wi-Fi Functions MU-MIMO, OFDMA, TX-beamforming, 160 MHz & DFS support Processor Quad-Core ARM® Cortex®-A53 @ 2.2 GHz Memory 1 GB DDR3L Networking Interface (1) GbE RJ45 WAN • (4) GbE RJ45 LAN Display 4.7″ diagonal, 274 × 1268, 279 ppi, full-colour G+F touch Antenna Internal dual-band metal stamp, 12 polarity Wireless Security WPA2 Network Features VLAN, advanced QoS, guest traffic isolation, IPv6, UPnP, Teleport VPN Power Method Universal AC input, 100–240 V AC, 50/60 Hz Max Power Consumption 35 W ESD/EMP Protection ± 24 kV air/contact Dimensions / Weight 110 × 110 × 250 mm • 1.2 kg Enclosure Polycarbonate Operating Temperature −10°C to 45°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources AmpliFi Alien Tech Specs AmpliFi Alien Installation Guide What's in the Box AmpliFi Alien Router The AFi-ALN-R Wi-Fi 6 router with 4.7″ touchscreen display. Power Adapter Universal AC power supply (100–240 V). Ethernet Cable Gigabit Ethernet patch lead for your WAN/modem connection. Documentation Quick-start guide and setup instructions. Best For Large & Multi-Storey Homes Gigabit Wi-Fi 6 from a single unit, with easy mesh expansion to blanket even the biggest properties. Home Offices & Remote Work Low-latency performance, VLANs, and Teleport VPN keep work traffic fast and secure. Streaming & Gaming Households 16 streams plus advanced QoS keep 4K streams and online gaming smooth across many devices. Wired + Wireless Setups Four Gigabit LAN ports let you hard-wire NAS, consoles, and PCs alongside fast Wi-Fi. Works as a stand-alone router straight out of the box — connect to your NBN/modem via the WAN port. Add more AmpliFi Alien routers as MeshPoints to extend gigabit coverage; no limit on units. Set up and managed entirely through the free AmpliFi app for iOS and Android. Powered by standard AU mains — no PoE or separate switch required. Frequently Asked Questions Is the AmpliFi Alien a Wi-Fi 6 router? Yes. It uses 802.11ax (Wi-Fi 6) radios with an 8x8 high-band 5 GHz radio reaching up to 4804 Mbps, and is fully backward compatible with older Wi-Fi standards. Can I expand coverage with more units? Yes. Add any number of additional AmpliFi Alien routers as MeshPoints to extend gigabit Wi-Fi across larger homes — each unit also adds 4 more LAN ports. Does it require a subscription? No. The AmpliFi Alien is managed through the free AmpliFi app with no monthly fees, including the free Teleport zero-config VPN service. How many wired devices can I connect? Each Alien router has 4 Gigabit Ethernet LAN ports plus a Gigabit WAN port, so you can hard-wire TVs, consoles, NAS, and PCs directly. Is the AmpliFi Alien NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the AmpliFi Alien is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Will it work with my Australian NBN connection? Yes. Connect the Gigabit WAN port to your NBN/NTD or modem. It uses standard 100–240 V AU mains power and ships fast Australia-wide. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,379.00 $749.00

• Save -$69.75

  TP-Link TP-Link EAP650 AX3000 Ceiling Mount WiFi 6 Access Point, 574 Mbps 2.4 GHz/2402 Mbps 5 GHz, Gigabit Ethernet (RJ-45) Port, OMADA Cloud Managemen, Mesh

   

  TP-Link EAP650 AX3000 Ceiling Mount WiFi 6 Access Point Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. Centralised Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. Ultra-Slim Design: Φ160 mm × 33.6 mm elegant design brings more agility. HARDWARE FEATURESInterface 1× Gigabit Ethernet (RJ-45) Port (supports IEEE802.3at PoE)Button ResetPower Supply • 802.3at PoE• 12 V / 1.0 A DC (EU), 12 V / 1.5 A DC (US)Power Consumption • EU: 13.5 W• US: 14.7 WDimensions ( W x D x H ) 6.3 × 6.3 × 1.3 in (160 × 160 × 33.6 mm)Antenna Type Internal Omni• 2.4 GHz: 2× 4 dBi• 5 GHz: 2× 5 dBiMounting • Ceiling /Wall Mounting (Kits included)• Junction Box MountingPackage Contents• EAP650• Power Adapter• Ceiling/Wall Mounting Kits• Installation GuideSystem Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Linux

  Read more less

   

  $248.75 $179.00

• Save -$19.72

  TP-Link TP-Link EAP610 AX1800 Wi-Fi 6 Ceiling Mount Access Point – Omada SDN | PoE+

   

  TP-Link EAP610 AX1800 Wi-Fi 6 Ceiling Mount Access Point – Omada SDN | PoE+ Overview The TP-Link EAP610 is a ceiling-mount Wi-Fi 6 (802.11ax) access point delivering combined wireless speeds of up to 1,775Mbps — 1,201Mbps on 5GHz and 574Mbps on 2.4GHz. Designed for commercial, hospitality, education, and enterprise environments, it integrates fully with the Omada SDN platform for centralised cloud management, Zero-Touch Provisioning, and multi-site control via the Omada app or web UI. PoE+ powered (802.3at) for clean, cable-free ceiling installation, with seamless roaming, Omada Mesh, and a secure guest network with multiple authentication options. A professional-grade Wi-Fi 6 access point at a competitive price point for Australian installers and IT managers. Key Features Wi-Fi 6 (AX1800) – 802.11ax dual-band; up to 1,201Mbps on 5GHz and 574Mbps on 2.4GHz for faster, more efficient wireless performance in device-dense environments. Omada SDN Integration – Centralised cloud management, Zero-Touch Provisioning, and multi-site control via the Omada app, web UI, or Omada Controller (OC200/OC300/Software). PoE+ Powered (802.3at) – Powered via a single Ethernet cable; also supports 12V DC for flexible installation options. Seamless Roaming – Uninterrupted video streams and voice calls as users move between access points; no manual reconnection required. Omada Mesh – Wireless backhaul between access points for extended coverage and flexible deployment without additional cabling. Secure Guest Network – Multiple authentication options including SMS, Facebook Wi-Fi, and voucher-based access for hospitality and retail environments. OFDMA & MU-MIMO – Wi-Fi 6 technologies that improve efficiency and throughput in high-density device environments. Ceiling & Wall Mountable – Mounting kits included; discreet low-profile design suits commercial interiors. Management VLAN, SNMP, SSH & Syslog – Full enterprise management feature set for IT administrators. LED On/Off Control – Disable LEDs for discreet deployment in hospitality or residential environments. Use Cases Commercial offices and co-working spaces requiring high-density Wi-Fi 6 coverage Hotels, restaurants, and hospitality venues needing guest network authentication Schools, universities, and education facilities with many concurrent devices Retail environments requiring seamless roaming across multiple access points Healthcare facilities and aged care with strict network segmentation requirements Multi-site business networks managed centrally via Omada cloud Warehouse and industrial environments using Omada Mesh for flexible coverage Technical Specifications Specification Details Model EAP610 Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/g/b/a) 5GHz Speed Up to 1,201Mbps 2.4GHz Speed Up to 574Mbps Ethernet Port 1 × Gigabit RJ45 (IEEE 802.3at PoE+) Power Supply 802.3at PoE+ or 12V / 1A DC Power Consumption (PoE) 12.8W Power Consumption (DC) 10.8W Antennas Internal Omni: 2.4GHz 2×4dBi, 5GHz 2×5dBi Mounting Ceiling / Wall (Kits Included) Dimensions (W × D × H) 243 × 243 × 64mm Omada SDN Yes (OC200, OC300, Software Controller, Cloud) Seamless Roaming Yes Omada Mesh Yes Guest Network Auth SMS, Facebook Wi-Fi, Voucher & More Management HTTP/HTTPS, SSH, SNMP v1/v2c/v3, Syslog, Omada App Management VLAN Yes L3 Management Yes Multi-Site Management Yes LED Control On/Off Controllable Frequently Asked Questions Do I need an Omada controller to use the EAP610? No. The EAP610 can be managed as a standalone access point via its web interface without any controller. An Omada controller (OC200, OC300, or Software Controller) is required only if you want centralised multi-AP management, Zero-Touch Provisioning, seamless roaming, or cloud access via the Omada app. What PoE standard does the EAP610 require? The EAP610 requires 802.3at PoE+ (up to 30W per port). It will not power on reliably from a standard 802.3af (15.4W) PoE switch. Ensure your PoE switch or injector supports 802.3at before installation. It also supports 12V DC power as an alternative. What is Omada Mesh and when should I use it? Omada Mesh allows EAP610 units to connect to each other wirelessly, extending Wi-Fi coverage without running additional Ethernet cables to every access point. This is useful for areas where cabling is difficult or cost-prohibitive. Note that wireless backhaul reduces available bandwidth compared to a wired Ethernet backhaul connection. Does the EAP610 support seamless roaming? Yes. When managed by an Omada controller, the EAP610 supports seamless roaming — devices automatically transition between access points without dropping video streams or voice calls. This requires multiple EAP610 (or compatible Omada EAP) units and an Omada controller. What guest network authentication options are available? The EAP610 supports multiple guest network authentication methods including SMS verification, Facebook Wi-Fi, and voucher-based access — making it well-suited for hotels, cafes, restaurants, and retail environments where controlled guest access is required. Is the EAP610 suitable for outdoor installation? No. The EAP610 is an indoor ceiling-mount access point with no IP weatherproof rating. For outdoor Wi-Fi coverage, TP-Link’s Omada outdoor EAP range (e.g. EAP225-Outdoor, EAP610-Outdoor) should be used instead. Installer Note: The EAP610 requires 802.3at PoE+ — confirm your switch or injector supports this standard before installation. For multi-AP deployments with seamless roaming, an Omada controller (OC200, OC300, or Software Controller) is required. Standalone mode does not support seamless roaming or centralised management.

  Read more less

   

  $198.72 $179.00

• Save -$0.60

  TP-Link TP-Link Deco X73-DSL AX5400 Mesh Wi-Fi 6 VDSL Modem Router (1-Pack)

   

  One Device. Modem, Router, and Whole-Home Mesh Wi-Fi 6 — All in One The TP-Link Deco X73-DSL is a whole-home Wi-Fi 6 mesh system with a built-in VDSL2 modem, purpose-built for Australian NBN FTTN and FTTB connections. It replaces your separate modem and router in a single unit, delivering AX5400 wireless speeds across every room while supporting downstream speeds up to 350 Mbps via VDSL2 Profile 35b. Expand coverage at any time by adding more Deco nodes to the mesh. Key Features Built-in VDSL2 Modem — Connects directly to your phone line for NBN FTTN and FTTB services; supports Profile 35b with downstream speeds up to 350 Mbps. Also compatible with ADSL and ADSL2+ AX5400 Wi-Fi 6 — 4804 Mbps on 5 GHz and 574 Mbps on 2.4 GHz for fast, low-latency wireless across all your devices Seamless Mesh Roaming — Automatically hands your device to the strongest Deco node as you move through your home, with no drop in connection 4× Gigabit Ethernet Ports — Flexible WAN/LAN configuration for wired devices including smart TVs, NVRs, gaming consoles, and desktop PCs 2× FXS Ports + 1× DSL Port — Connect up to two standard analogue phones directly without a separate VoIP adapter OFDMA & MU-MIMO — Serves multiple devices simultaneously with reduced latency, ideal for busy households Beamforming — Focuses wireless signal toward connected clients to extend effective range and improve throughput 4× Internal Antennas — Signal-boosting array covers more directions and larger areas for consistent whole-home coverage TP-Link HomeShield — Real-time IoT device protection, parental controls with content filtering and screen time scheduling, and comprehensive network usage reports Optional Ethernet Backhaul — Wire Deco units together for maximum mesh performance and dedicated backhaul bandwidth Flexible Working Modes — DSL modem router, standard router, or access point to suit your existing setup Deco App — Simple setup and ongoing management from your iOS or Android device Typical Use Cases NBN FTTN or FTTB households replacing an ageing modem router with a single modern unit 1–3 bedroom homes needing whole-home Wi-Fi 6 coverage up to 270 m² Families requiring parental controls and IoT security via HomeShield Home offices with wired workstations, NAS drives, or IP cameras needing Gigabit LAN ports Households retaining an existing landline phone service via the built-in FXS ports Existing Deco mesh networks adding a VDSL modem-capable entry node Technical Specifications Specification Detail Model Deco X73-DSL (1-Pack) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a 5 GHz; 802.11ax/n/b/g 2.4 GHz) Wi-Fi Speed AX5400: 4804 Mbps (5 GHz) + 574 Mbps (2.4 GHz) Wi-Fi Bands Dual-Band (2.4 GHz + 5 GHz) Streams 4 streams Modem Type VDSL2 Profile 35b / ADSL / ADSL2+ Max DSL Speed Up to 350 Mbps downstream (Profile 35b) Ethernet Ports 4× Gigabit WAN/LAN RJ45 Phone Ports 2× FXS (RJ11) + 1× DSL (RJ11) Antennas 4× internal Wi-Fi Technologies OFDMA, MU-MIMO, Beamforming, BSS Colour Working Modes DSL Modem Router / Router / Access Point Coverage (1-Pack) Up to 270 m² (1–3 bedroom homes) Security Suite TP-Link HomeShield (IoT protection, parental controls, network reports) Management App Deco App (iOS & Android) Weight 1.74 kg (unit + accessories) Barcode (EAN) 6935364072872 SKU Deco X73-DSL(1-pack) What’s in the Box 1× Deco X73-DSL unit 1× RJ45 Ethernet cable 2× RJ11 DSL cables 1× External DSL splitter 1× Power adapter 1× Telephony feature guide Quick installation guide Frequently Asked Questions Is the Deco X73-DSL compatible with Australian NBN FTTN and FTTB services? Yes. The built-in VDSL2 modem connects directly to your phone line and is fully compatible with NBN FTTN (Fibre to the Node) and FTTB (Fibre to the Building) connection types. It also supports legacy ADSL and ADSL2+ services. Do I still need a separate modem? No. The Deco X73-DSL replaces both your existing modem and router in a single unit, simplifying your setup and reducing the number of devices in your home. Can I keep my existing landline phone? The Deco X73-DSL includes two FXS ports for connecting standard analogue phones. Whether you can retain your existing number depends on your NBN provider’s VoIP service — confirm with your ISP before purchasing if landline continuity is important. Can I expand coverage beyond 270 m²? Yes. Additional Deco nodes (such as the Deco X50 or Deco XE75) connect to the X73-DSL via wireless mesh or optional Ethernet backhaul to extend coverage throughout larger homes. What is TP-Link HomeShield? HomeShield is TP-Link’s built-in network security suite offering real-time IoT device protection, parental controls with content filtering and screen time limits, and detailed network usage reports. Basic features are free; HomeShield Pro unlocks advanced capabilities via subscription. Does it support Ethernet backhaul between Deco units? Yes. Running Ethernet cable between Deco units enables wired backhaul, which frees up wireless bandwidth for client devices and significantly improves overall mesh performance. What NBN connection types does it NOT support? The Deco X73-DSL is not compatible with NBN FTTP (Fibre to the Premises), FTTC (Fibre to the Curb), HFC (cable), or Fixed Wireless connections. For those connection types, you will need a standard router without a built-in DSL modem.

  Read more less

   

  $349.60 $349.00

• Save -$34.30

  TP-Link TP-Link Deco X68(3-pack) AX3600 Whole Home Mesh WiFi 6 Router, 650 Square Meters, 150 Devices, 1802 Mbps, WPA, QoS, 3x3 MU-MIMO, OFDMA

   

  TP-Link Deco X68(3-pack) AX3600 Whole Home Mesh WiFi 6 Router• AX3600 Tri-Band WiFi: Boosts overall speeds up to an incredible 3600 Mbps• AI-Driven Mesh: Intelligently learns the network environment to provide ideal WiFi unique to your home• Connect More Devices: Connect over 150 devices without dragging down performance• Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home WiFi signal generated by WiFi 6• TP-Link HomeShield: Keeps your home network safe with cutting-edge features for network and IoT protection• Setup Made Easier Than Ever: The Deco app walks you through setup step-by-stepWIRELESSStandards Wi-Fi 6IEEE 802.11ax/ac/n/a 5 GHzIEEE 802.11ax/n/b/g 2.4 GHzWiFi Speeds AX36005 GHz: 1802 Mbps (802.11ax)5 GHz: 1201 Mbps (802.11ax)2.4 GHz: 574 Mbps (802.11ax)Working Modes Router ModeAccess Point ModeHARDWAREProcessor 1.5 GHz Quad-Core CPUEthernet Ports 2× Gigabit Ports*Per Deco UnitSupports WAN/LAN auto-sensingButtons Reset ButtonPower 12 V ⎓ 2.5 APHYSICALDimensions (W×D×H) (105 × 105 × 168 mm)

  Read more less

   

  $510.60 $476.30

• Save -$23.20

  TP-Link TP-Link Deco X68(2-pack) AX3600 Whole Home Mesh Wi-Fi 6 System (WIFI6), Up to 510m Coverage, WPA3, Tri-Band, OFDMA, MU-MIMO

   

  TP-Link Deco X68(2-pack) AX3600 Whole Home Mesh Wi-Fi 6 System• AX3600 Tri-Band WiFi: Boosts overall speeds up to an incredible 3600 Mbps• AI-Driven Mesh: Intelligently learns the network environment to provide ideal WiFi unique to your home• Connect More Devices: Connect over 150 devices without dragging down performance• Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home WiFi signal generated by WiFi 6• TP-Link HomeShield: Keeps your home network safe with cutting-edge features for network and IoT protection• Setup Made Easier Than Ever: The Deco app walks you through setup step-by-stepWIRELESSStandards Wi-Fi 6IEEE 802.11ax/ac/n/a 5 GHzIEEE 802.11ax/n/b/g 2.4 GHzWiFi Speeds AX36005 GHz: 1201 Mbps (802.11ax) as dedicated backhaul5 GHz: 1802 Mbps (802.11ax)2.4 GHz: 574 Mbps (802.11ax)WiFi Range 3-5 Bedroom Houses (2-pack)TP-Link Mesh TechnologyOptional Ethernet backhaul work together to link Deco units to provide seamless coverage5× High-Gain AntennasMultiple antennas form a signal-boosting array to cover more directions and large areasTri-BandProvides an extra 5 GHz band working exclusively as the strong backhaul, strengthening the WiFi coverageBeamformingConcentrates wireless signal strength towards clients to expand WiFi rangeWiFi Capacity HighTri-BandDistribute devices to different bands for optimal performance4×4 MU-MIMOSilmultaneously communicates with multiple MU-MIMO clientsOFDMASilmultaneously communicates with multiple WiFi 6 clients7 StreamsMore than enough bandwidth for connected devicesWorking Modes Router ModeAccess Point ModePHYSICALDimensions (W×D×H) (105 × 105 × 168 mm)Package ContentsDeco X68 (2-pack)2 Deco X68 Units1 RJ45 Ethernet Cable2 Power Adapters1 Quick Installation Guide

  Read more less

   

  $356.50 $333.30

• Save -$13.25

  TP-Link TP-Link Deco X68(1-pack) AX3600 Whole Home Mesh WiFi 6 Router, 150 Devices, 1802 Mbps, WPA, QoS, 3x3 MU-MIMO, OFDMA

   

  TP-Link Deco X68(1-pack) AX3600 Whole Home Mesh WiFi 6 Router• AX3600 Tri-Band WiFi: Boosts overall speeds up to an incredible 3600 Mbps• AI-Driven Mesh: Intelligently learns the network environment to provide ideal WiFi unique to your home• Connect More Devices: Connect over 150 devices without dragging down performance• Boosted Seamless Coverage: Achieve seamless whole home coverage with a clearer and stronger whole home WiFi signal generated by WiFi 6• TP-Link HomeShield: Keeps your home network safe with cutting-edge features for network and IoT protection• Setup Made Easier Than Ever: The Deco app walks you through setup step-by-stepWIRELESSStandards Wi-Fi 6IEEE 802.11ax/ac/n/a 5 GHzIEEE 802.11ax/n/b/g 2.4 GHzWiFi Speeds AX36005 GHz: 1802 Mbps (802.11ax)5 GHz: 1201 Mbps (802.11ax)2.4 GHz: 574 Mbps (802.11ax)Working Modes Router ModeAccess Point ModeHARDWAREProcessor 1.5 GHz Quad-Core CPUEthernet Ports 2× Gigabit Ports*Per Deco UnitSupports WAN/LAN auto-sensingButtons Reset ButtonPower 12 V ⎓ 2.5 APHYSICALDimensions (W×D×H) (105 × 105 × 168 mm)

  Read more less

   

  $203.55 $190.30

• Save -$50.00

  TP-Link TP-Link Deco X20 (2-Pack) AX1800 Whole Home Mesh Wi-Fi 6 System

   

  TP-Link Deco X20 (2-Pack) AX1800 Whole Home Mesh Wi-Fi 6 System Wi-Fi 6 Mesh Coverage for the Whole Home — Up to 370 m² The TP-Link Deco X20 2-pack is an AX1800 dual-band Wi-Fi 6 mesh system that delivers fast, seamless wireless coverage across your entire home. Two Deco units combine to cover up to 370 m² under a single network name, with Wi-Fi 6 technologies including OFDMA, MU-MIMO, and BSS Colouring ensuring more devices connect faster with lower latency. Managed via the Deco app, it’s an ideal upgrade for Australian households with multiple users and smart devices. Key Features Wi-Fi 6 (802.11ax) dual-band — 1,201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz (AX1800) 2-pack covers up to 370 m² — expandable by adding more Deco units at any time OFDMA and MU-MIMO — quadruple capacity for simultaneous transmission to more devices BSS Colouring — reduces interference from neighbouring Wi-Fi networks Ultra-low latency — ideal for gaming, video calls, and real-time applications Seamless roaming — single SSID with auto band and AP steering as you move through your home WPA3 encryption for enhanced wireless security TP-Link HomeCare — parental controls, antivirus, and QoS built in Optional Ethernet backhaul for maximum inter-unit performance Qualcomm 1 GHz quad-core CPU for smooth, responsive performance 2 × Gigabit LAN/WAN ports per unit Setup via the Deco app (iOS & Android) — step-by-step guided installation Use Cases Medium to Large Homes: Eliminate Wi-Fi dead zones across multi-storey homes, homes with thick walls, or properties up to 370 m². High-Device Households: Wi-Fi 6’s OFDMA technology handles dozens of simultaneous connections — smartphones, tablets, smart TVs, cameras, and IoT devices all at once. Gamers & Streamers: Ultra-low latency and fast 5 GHz speeds keep gaming and 4K streaming smooth even with multiple users online. Families: HomeCare parental controls let you manage screen time and content filtering per device or profile. Home Offices: Reliable, low-latency Wi-Fi for video conferencing and large file transfers throughout the home. Specifications Specification Detail Model Deco X20 (2-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax) — AX1800 Dual-Band Wireless Speeds 1,201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz Coverage (2-Pack) Up to 370 m² Processor Qualcomm 1 GHz Quad-Core LAN/WAN Ports 2 × Gigabit per unit Antennas 4 × internal per unit Wi-Fi Technologies OFDMA, MU-MIMO, BSS Colour, Beamforming, 1024-QAM Mesh Features Auto Path Selection, Self-Healing, AP Steering, Band Steering Backhaul Wireless or optional Ethernet Security WPA3, WPA2-PSK, WPA-PSK HomeCare Parental controls, antivirus, QoS App Deco App (iOS & Android) Dimensions (per unit) Ø110 × 114 mm Weight (2-pack) 2.14 kg Frequently Asked Questions What is the difference between Wi-Fi 6 and Wi-Fi 5? Wi-Fi 6 (802.11ax) introduces OFDMA and MU-MIMO improvements that allow more devices to communicate simultaneously without congestion. It also delivers higher speeds, lower latency, and better performance in dense environments compared to Wi-Fi 5 (802.11ac). Wi-Fi 6 devices benefit most, but older Wi-Fi 5 and Wi-Fi 4 devices remain fully compatible. How many Deco X20 units do I need? The 2-pack covers up to 370 m², which suits most Australian homes. For larger properties or homes with challenging layouts, simply add a 1-pack or additional 2-pack to extend coverage — all units join the same mesh network automatically. Does the Deco X20 work with my Australian ISP? Yes. The Deco X20 is compatible with major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and supports NBN FTTP, FTTN, FTTB, HFC, and fixed wireless connections. What is Ethernet backhaul and should I use it? Ethernet backhaul connects Deco units via a wired Ethernet cable instead of wirelessly. This dedicates the full wireless bandwidth to your devices rather than sharing it with the inter-unit connection, resulting in better performance — especially in larger homes. It’s optional but recommended where cabling is practical. What is TP-Link HomeCare? HomeCare is TP-Link’s built-in security and management suite that includes parental controls (per-device content filtering and time limits), antivirus protection powered by Trend Micro, and QoS for prioritising specific devices or applications. Basic features are included free with the Deco X20. Can I manage the Deco X20 remotely? Yes. The Deco app allows you to monitor connected devices, run speed tests, adjust parental controls, and manage your network from anywhere via your smartphone.

  Read more less

   

  $299.00 $249.00

Show more products