Ubiquiti 24 V DC PoE Adapters providing a variety of features to help protect your PoE devices, POE-24-7W  Surge and clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground POE-24-7W-G-WH Dimensions 72 x 45 x 33 mm (2.84 x 1.75 x 1.33") Weight 72.1g (2.54 oz) Output Voltage 24VDC @ 0.3A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @240VAC Inrush Current <40A Peak @ 120VAC, <70A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering – Operating Temperature 0 to 40°C (32 to 104°F) Storage Temperature -30 to 70°C (-22 to 158°F) Operating Humidity 35 to 95% Non-Condensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 _s) Power Peak Pulse Current 36A (10/1000 _s) Data Shunt Capacitance <5 pf data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-12W-G Dimensions 87 x 44 x 29 mm (3.43 x 1.73 x 1.14") Weight 99.4 g (3.51 oz) Output Voltage 24VDC @ 0.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency 75+% Output Ripple 1% Max. Switching Frequency 50 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 _s) Power Peak Pulse Current 36A (10/1000 _s) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL POE-24-24W-G Dimensions 88 x 57 x 33 mm (3.47 x 2.24 x 1.30") Weight 158.5 g (5.59 oz) Output Voltage 24VDC @ 1.0A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability Yes Reset Button Yes Rated Voltage 100-240VAC @ 50/60Hz Input Current 0.6A @ 120VAC, 0.4A @ 240VAC Inrush Current <60A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 80+% Output Ripple 1% Max. Switching Frequency 65 kHz Line Regulation ≤ 3% Load Regulation ≤ 5% 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (-) 4-Pair Powering - Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70°C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / PoE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 μs) Power Peak Pulse Current 36A (10/1000 μs) Data Shunt Capacitance <5 pF data Response Time <1 ns Certifications CE, FCC, IC, UL

Read more less

UniFi OS Console — All-in-One Gateway & NVR UniFi Dream Machine Pro (UDM-Pro) — All-in-One UniFi OS Console, Security Gateway & UniFi Protect NVR The UniFi Dream Machine Pro (UDM-Pro) is Ubiquiti’s flagship all-in-one UniFi OS Console — combining an enterprise-grade security gateway, UniFi Network controller, UniFi Protect NVR, and threat management engine into a single 1U rack-mount device. With 8 × Gigabit Ethernet ports, dual 10G SFP+ (WAN + LAN), a 3.5″ HDD bay for local camera recordings, and the full UniFi application suite pre-installed, the UDM-Pro is the ideal foundation for professional home, office, and small business networks across Australia. LAN Ports 8 × GbE + 10G WAN GbE + 10G SFP+ NVR Storage 3.5″ HDD Bay Threat Mgmt Built-in IDS/IPS Why Choose the UniFi Dream Machine Pro? All-in-One UniFi OS Console Runs the complete UniFi application suite — UniFi Network, UniFi Protect, and more — from a single device. Eliminates the need for separate controllers, gateways, and NVR hardware. Enterprise Security Gateway Full USG-class security gateway with advanced threat management, IDS/IPS, traffic identification, and deep packet inspection — protecting your network at wire speed. 8 × Gigabit LAN + 10G SFP+ LAN Nine LAN ports including eight Gigabit RJ45 and one 10G SFP+ — enough to connect switches, APs, and devices directly without additional hardware for smaller deployments. Dual WAN — GbE + 10G SFP+ One Gigabit RJ45 WAN and one 10G SFP+ WAN port support dual-WAN failover and load balancing — keeping your network online even if one ISP connection drops. Built-in UniFi Protect NVR The 3.5″ HDD bay enables local UniFi Protect camera recordings directly on the UDM-Pro — no separate NVR required for smaller camera deployments. UniFi Network Controller Pre-Installed Manage your entire UniFi network — switches, access points, and clients — through the built-in UniFi Network application. No separate cloud key or controller hardware needed. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your network and cameras running during power events. 1U Rack-Mount Form Factor Clean 1U rack-mount design integrates into server rooms, comms cabinets, and AV racks — ideal for professional office and business installations. Ideal Use Cases 🏢 Small to Medium Business Replace multiple separate devices — gateway, controller, NVR — with a single UDM-Pro. Ideal for offices, retail stores, and professional services firms. 🏡 Advanced Home Networks Power users and home lab enthusiasts who want enterprise-grade routing, threat management, and UniFi Protect camera recording in one clean rack-mount unit. 📹 UniFi Protect Camera Systems The UDM-Pro doubles as a UniFi Protect NVR — connect UniFi cameras directly and record locally without a separate UNVR or UNVR Instant. 🌐 Multi-WAN & Failover Deployments Businesses requiring dual-WAN failover or load balancing across fibre and 4G/5G connections for maximum uptime. Technical Specifications Model UDM-Pro Form Factor 1U Rack-mount LAN Ports 8 × Gigabit RJ45 • 1 × 10G SFP+ WAN Ports 1 × Gigabit RJ45 • 1 × 10G SFP+ HDD Bay 1 × 3.5″ SATA (for UniFi Protect, drive not included) UniFi Applications UniFi Network • UniFi Protect • UniFi OS Threat Management IDS/IPS, traffic identification, deep packet inspection Power Redundancy USP-RPS compatible (sold separately) Management UniFi OS • UniFi app (iOS/Android) • Web UI What’s in the Box 📦 UDM-Pro Unit All-in-one UniFi OS Console with pre-installed UniFi Network and UniFi Protect. 🔧 Rack Mount Hardware Rack-mount brackets, screws, and power cord included. 📖 Quick-Start Guide Installation guide and documentation included. ⚠️ Not Included 3.5″ HDD for UniFi Protect storage and cameras are sold separately. Frequently Asked Questions Does the UDM-Pro require a UniFi subscription? No. UniFi Network and UniFi Protect run fully locally on the UDM-Pro. There are no monthly fees or cloud subscriptions required for full functionality. Can the UDM-Pro run UniFi Protect for cameras? Yes. Install a 3.5″ HDD in the built-in bay and the UDM-Pro acts as a UniFi Protect NVR — supporting UniFi cameras for local recording and AI detection. What is the difference between the UDM-Pro and UDM-SE? The UDM-SE adds 8 × built-in PoE ports (allowing direct camera and AP connection), a larger 2.5″ HDD bay, and a 10G SFP+ LAN port. The UDM-Pro has no built-in PoE but offers dual 10G SFP+ and is better suited for pure routing/gateway deployments. Does it support dual-WAN failover? Yes. The UDM-Pro supports dual-WAN failover and load balancing across the Gigabit RJ45 WAN and 10G SFP+ WAN ports. What hard drive do I need for UniFi Protect? Any compatible 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording reliability. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Downloads & Resources Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

The Instant PoE to USB Converter conveniently provides power to USB capable devices.  Supplies power to USB-powered devices Multipurpose use The Instant 802.3af PoE to USB Converter works with your device’s USB port to efficiently supply power over its wired connection.The Instant 802.3af PoE to USB Converter integrates seamlessly with a variety of auto-sensing 802.3af PoE switches.Multipurpose Use, The Instant 802.3af PoE to USB Converter provides power to a wide variety of USB-powered devices. Use the converter to easily recharge various handheld devices, such as your smartphone or tablet.

Read more less

Power and Connect Up to 4 PoE Devices with a Single Cable The TP-Link TL-SF1005P is a compact, plug-and-play unmanaged switch with four 802.3af PoE ports and a generous 58W total power budget. It eliminates the need for separate power adapters by delivering both data and power over a single Ethernet cable — making it a practical choice for small CCTV installations, wireless access point deployments, and VoIP phone setups in homes, small offices, and retail environments across Australia. Key Features 4× PoE Ports (802.3af): Power IP cameras, access points, VoIP phones, and other 802.3af-compliant devices without separate power adapters or injectors. 58W Total PoE Budget: Up to 15.4W per PoE port, with a combined budget of 58W across all four ports — higher than many comparable desktop switches. 5× 10/100Mbps RJ45 Ports: Four PoE-enabled ports plus one uplink port for connecting to your router or network. Plug & Play: No configuration, software, or management interface required — connect and it works immediately. Fanless & Silent: Completely silent operation — suitable for desks, reception areas, and home installations. Auto-Negotiation & Auto MDI/MDIX: Automatically adjusts to connected devices and cable types for hassle-free setup. Overload Protection: Automatically manages power distribution to prevent overloading connected PoE devices. Compact Form Factor: Small desktop footprint (99.8 × 98 × 25mm) fits easily on a desk, shelf, or inside a cabinet. Common Use Cases Powering 1–4 IP security cameras in small CCTV systems Connecting and powering wireless access points in small offices or retail stores VoIP phone deployments in reception areas or small teams Expanding a home or office network to locations without nearby power outlets Replacing a PoE injector with a multi-port solution for cleaner cable management Technical Specifications Model TL-SF1005P Total Ports 5× 10/100Mbps RJ45 PoE Ports 4× (Ports 1–4), IEEE 802.3af Max PoE Per Port 15.4W Total PoE Budget 58W Switching Capacity 1 Gbps MAC Address Table 2K Transmission Method Store-and-Forward Power Supply External adapter — 48V DC / 1.25A Max Power Consumption 1.70W (no PD) / 63.51W (full PoE load) Fan Fanless (silent) Dimensions (W × D × H) 99.8 × 98 × 25mm Cable Type Cat3/4/5 (10BASE-T), Cat5/5e (100BASE-TX), max 100m Operating Temperature 0°C to 40°C Certifications CE, RoHS, FCC In the Box TL-SF1005P, Power Adapter, Installation Guide Frequently Asked Questions What is the difference between the TL-SF1005P and the TL-SF1005LP? The TL-SF1005P has a higher total PoE budget of 58W compared to the TL-SF1005LP's 41W. The TL-SF1005P also lacks the Extend Mode (250m) and Priority Mode features found on the TL-SF1005LP. If you need longer cable runs, choose the TL-SF1005LP; if you need more total PoE power, choose the TL-SF1005P. Is the TL-SF1005P managed or unmanaged? It is an unmanaged switch. There is no web interface, app, or software — it operates automatically with no configuration required. Simply plug in your devices and it works. Can I use it with 802.3at (PoE+) devices? The TL-SF1005P supports IEEE 802.3af only, providing up to 15.4W per port. It is not compatible with 802.3at PoE+ devices that require more than 15.4W. For PoE+ devices, consider a TP-Link PoE+ switch. How many IP cameras can I connect? Up to 4 IP cameras can be connected via the PoE ports (Ports 1–4). The fifth port is a standard uplink port for connecting to your router or NVR. Ensure the total power draw of all connected cameras does not exceed 58W. Does it support VLAN or QoS? No. As an unmanaged switch, it does not support VLAN, QoS, or any advanced traffic management. It is designed for simple plug-and-play deployments. What cable length is supported for PoE? Standard Ethernet cable runs up to 100m are supported for both data and PoE power delivery. Unlike the TL-SF1005LP, this model does not include an Extend Mode for longer runs.

Read more less

TP-Link MC220L Gigabit SFP Media Converter Flexible Gigabit fibre conversion with the freedom of SFP. The TP-Link MC220L bridges a 10/100/1000Mbps copper RJ45 network to a Gigabit fibre link using a standard SFP (mini-GBIC) module — giving you the flexibility to choose your fibre type and distance by simply swapping the SFP. It supports both multi-mode fibre (up to 0.55km) and single-mode fibre (up to 10km), making it a versatile fit for building-to-building links, campus networks, and data centre interconnects. Key Features 1 × 10/100/1000Mbps RJ45 copper port with Auto-Negotiation and Auto MDI/MDIX 1 × SFP (mini-GBIC) slot — accepts standard SFP modules for flexible fibre type selection Supports multi-mode fibre up to 0.55km and single-mode fibre up to 10km (SFP-dependent) Compliant with IEEE 802.3ab (1000Base-T) and IEEE 802.3z (1000Base-SX/LX) Hot-swappable SFP slot — replace or upgrade the SFP module without powering down Compatible with TP-Link TL-MC1400 media converter chassis for rack-based deployments Standalone desktop operation or chassis-mounted use Use Cases Connecting Gigabit copper network equipment over fibre between buildings or floors Campus and enterprise network fibre backbone interconnects Data centre fibre-to-copper conversion at the server or switch edge Surveillance and IP camera networks requiring long-distance Gigabit fibre runs Rack-based deployments using the TP-Link TL-MC1400 chassis Specifications Specification Detail Model MC220L Standards IEEE 802.3ab (1000Base-T), IEEE 802.3z (1000Base-SX/LX) Copper Port 1 × 10/100/1000Mbps RJ45 (Auto-Negotiation, Auto MDI/MDIX) Fibre Port 1 × SFP (mini-GBIC) slot Multi-Mode Fibre Distance Up to 0.55km Single-Mode Fibre Distance Up to 10km SFP Hot-Swappable Yes Deployment Standalone or TL-MC1400 chassis Weight 520 g SKU MC220L Vendor TP-Link Recommended Accessories TP-Link TL-SM311LM SFP Module — multi-mode SFP for 550m fibre links (LC connector) TP-Link TL-SM311LS SFP Module — single-mode SFP for 10km fibre links (LC connector) TP-Link TL-MC1400 Media Converter Chassis — for rack-based, high-density deployments LC-LC or LC-SC fibre patch cables — to connect the SFP module to your fibre infrastructure Frequently Asked Questions Does the MC220L come with an SFP module included? No. The MC220L is sold without an SFP module. You will need to purchase a compatible SFP separately based on your fibre type (multi-mode or single-mode) and required distance. TP-Link TL-SM311LM (multi-mode) and TL-SM311LS (single-mode) are compatible options. What fibre connector type does the MC220L use? The connector type depends on the SFP module installed. Most standard Gigabit SFP modules use an LC duplex connector. Always confirm the connector type of your chosen SFP before purchasing fibre patch cables. Can I use third-party SFP modules with the MC220L? The MC220L is designed for use with TP-Link SFP modules. Compatibility with third-party SFPs is not guaranteed. For reliable operation, TP-Link-branded SFP modules are recommended. Can the MC220L be installed in the TL-MC1400 chassis? Yes. The MC220L is compatible with the TP-Link TL-MC1400 14-slot rackmount chassis, allowing centralised, rack-based deployment alongside other TP-Link MC series converters. What is the difference between multi-mode and single-mode fibre? Multi-mode fibre (MMF) supports shorter distances (up to 0.55km with this converter) and is typically used within buildings or between nearby structures. Single-mode fibre (SMF) supports longer distances (up to 10km) and is used for building-to-building or campus-wide links. The MC220L supports both — the SFP module you install determines which type is used. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

Ubiquiti's EdgePoint POE-54V-80W PoE Injector is designed to power Ubiquiti's EP-R8 and EP-S16 EdgePoint models. Australian (AU) Power cable included Dimensions 123 x 65 x 34 mm Weight 299 g Output Voltage 54VDC @ 1.5A LAN Activity Indicator No Gigabit LAN Port Yes Remote Reset Capability No Reset Button 100-240AC @ 50/60Hz Input Voltage 100-240AC @ 50/60Hz Input Current 0.8A @ 120VAC 0.4A @ 240VAC Inrush Current <80A Peak @ 120VAC, <120A Peak @ 230VAC Efficiency 87+% Output Ripple 1% Max Switching Frequency 100 kHz Max. Line Regulation ± 1% Load Regulation ± 3% 4-Pair Powering Pins 1, 2, 4, 5 (+) and Pins 3, 6, 7, 8 (-) Operating Temperature 0 to 40° C (32 to 104° F) Storage Temperature -30 to 70° C (-22 to 158° F) Operating Humidity 35 to 95% Noncondensing AC Connector IEC-320 C6 Data IN / POE RJ45 Shielded Socket Surge Protection Difference and Common Mode Clamping Protection 11V Data, 60V Power Max. Surge Discharge 1500A (8/20 µs) Power Peak Pulse Current 36A (10/1000 µs) Data Shunt Capacitance <5 pF data Response Time <1 ns Compliance IEC 60950-1:2005+A1 UL60950-1 EN55022:2010, EN55024:2010 FCC Class B AC Cable with Earth Ground RCM

Read more less

Ubiquiti Instant 8023af Adapter Outdoor GigabitThe Adapter transforms almost any 24V Ubiquiti PoE (Power over Ethernet) device into a fully compliant 48V, 802.3af-compatible product. The Instant 802.3af Gigabit PoE Converter works with 10/100/1000 Mbps ports to deliver high throughput speeds over its wired connection.The Adapter works seamlessly with a variety of 802.3af switches for remote power control applications. As you manage and monitor your network, you can conveniently power or power cycle your remote devices using your 802.3af switch.The Instant 802.3af Gigabit PoE Converter enables longer cable runs due to a more efficient power delivery – so your products can get the power they require even when they are located far from the 802.3af switch.The Adapter provides an additional ±15kV of Ethernet isolation for built-in protection that lessens the risk of ESD or surge damage to your devices

Read more less

Ubiquiti Ethernet Surge Protector, Engineered Protect Any Power‑over‑Ethernet (PoE) /Nnon‑PoE Device, Connection Speeds Up to 1 Gbps ESD protection for outdoor high-speed networks. Protects outdoor Ethernet devices(2) Passive, surge-protected RJ45 connectionsQuick and easy installationCompatible with GbE networks Technical Specifications Mechanical Dimensions 91 x 61 x 32.5 mm (3.6 x 2.4 x 1.3") Weight 80 g (2.8 oz) Weatherproofing IPX5 Hardware Networking interface (2) RJ45 female connectors ESD/EMP protection Absorbing transient current with response to surge voltage from 100V/s to 1kV/µs DC spark-over voltage 90V @ 100V/s Max. impulse spark-over voltage 700V @ 1kV/µs Discharge Current 10kA+ Max. insulation resistance 1G ohm @ 50V Max. capacitance 1.0 pF @ 1 MHz Data line protection GbE PoE support Yes Shock and vibration certification ETSI300-019-1.4 Standard Ambient operating temperature -30 to 65° C (-22 to 149° F) Ambient operating humidity 10 to 90% noncondensing

Read more less

Ubiquiti SFP+ Direct Attach Cable, 10Gbps DAC Cable, 10Gbps Throughput Rate, 3m Length SFP+ direct attach cable available in multiple lengths. The 10 Gbps Direct Attach Cable is an SFP+ compatible cable capable of sustaining 10 Gbps throughput. Available in 3 lengths, this cable is perfect for creating short links between switches that deliver 10 Gbps speed throughout your network. Features: Supported data rates: 10/1 Gbps SFP+ to SFP+ connector Passive copper cable

Read more less

TP-Link OC200 – Omada Cloud Controller for Up to 100 Devices The TP-Link OC200 is a compact, dedicated hardware controller for the Omada SDN ecosystem, providing centralised management of up to 100 Omada access points, JetStream switches, and SafeStream routers. Powered via 802.3af/at PoE or Micro USB, it installs neatly in a comms cabinet or on a shelf without requiring a separate power adapter. With cloud access, L3 management, multi-site support, and the free Omada app, it’s the right step up from software-based controllers for small to medium business deployments across Australia. Key Features Centralised Management for Up to 100 Devices: Manage up to 100 Omada access points, compatible JetStream switches, and SafeStream routers from a single dashboard. Dedicated Hardware Controller: Runs independently on its own hardware — no host PC, VM, or always-on computer required for local management. PoE Powered (802.3af/at): Powers directly from a standard PoE switch port — no separate power adapter or power outlet required at the installation point. Cloud Access: Manage your Omada network remotely from anywhere via the Omada Cloud portal or the free Omada mobile app on iOS and Android. L3 Management: Discovers and manages Omada devices across different subnets and VLANs without requiring devices to be on the same network segment as the controller. Multi-Site Management: Manage Omada devices across multiple physical locations from a single OC200 controller. Automatic Device Discovery: Automatically discovers and adopts compatible Omada devices on the network for rapid deployment. Batch Firmware Upgrade: Update firmware across multiple Omada devices simultaneously from the controller dashboard. Captive Portal Management: Centralised guest Wi-Fi captive portal with multiple authentication options including Facebook Wi-Fi, SMS login, and voucher-based access. USB 2.0 Port for Auto Backup: Connect a USB drive for automatic configuration backup. Compact Form Factor: 100 × 98 × 25mm — mounts on a wall, shelf, or inside a comms cabinet with minimal footprint. Advanced Wireless Features: Band steering, airtime fairness, beamforming, load balancing, rate limiting, SSID-to-VLAN mapping, rogue AP detection, and 802.1X support managed centrally. Ideal Use Cases Small to medium businesses deploying up to 100 Omada access points across a single site or multiple locations. Hospitality venues, retail stores, and offices requiring centralised guest Wi-Fi management with captive portal authentication. IT administrators who need always-on local controller availability without running a dedicated PC or server. Deployments where PoE-powered installation simplifies cabling — no separate power outlet required at the controller location. Managed service providers managing smaller Omada deployments across multiple client sites. Upgrading from a software-based Omada Controller to a dedicated hardware appliance for improved reliability. Technical Specifications Specification Detail Model OC200 Ethernet Ports 2 × 10/100Mbps RJ45 USB Port 1 × USB 2.0 (auto backup) Micro USB Port 1 × Micro USB (power input) Power Supply 802.3af/at PoE or Micro USB (DC 5V / min. 1A) Max Managed Devices 100 (Omada APs, JetStream switches, SafeStream routers) Cloud Access Yes L3 Management Yes Multi-Site Management Yes Omada App Yes (iOS & Android) Captive Portal Yes (Facebook Wi-Fi, SMS, Voucher) Wireless Features Band steering, airtime fairness, beamforming, load balancing, rate limiting, SSID-to-VLAN, rogue AP detection, 802.1X Dimensions 100 × 98 × 25 mm Weight 0.46kg SKU OC200 Barcode (EAN) 6935364084233 What’s in the Box 1 × OC200 Omada Cloud Controller Quick Installation Guide Frequently Asked Questions What is the difference between the OC200 and the OC300? The OC200 manages up to 100 Omada devices and is powered via PoE or Micro USB, making it compact and easy to install without a dedicated power outlet. The OC300 manages up to 500 devices, has a rack-mountable metal chassis, Gigabit Ethernet ports, and a USB 3.0 backup port — suited to larger deployments. Choose the OC200 for small to medium sites and the OC300 for larger or enterprise-scale Omada networks. Does the OC200 require a cloud subscription? No. The OC200 provides full local management without any cloud subscription. Cloud access via the Omada Cloud portal and mobile app is an optional feature available at no additional cost. Can I power the OC200 from a PoE switch? Yes. The OC200 supports 802.3af/at PoE, allowing it to be powered directly from a compatible PoE switch port — no separate power adapter or power outlet is required at the installation point. Does it support L3 management across different VLANs? Yes. L3 management allows the OC200 to discover and manage Omada devices on different subnets or VLANs from the controller itself. What captive portal authentication methods are supported? The OC200 supports Facebook Wi-Fi, SMS login, and voucher-based authentication for guest Wi-Fi captive portals — suitable for hospitality, retail, and public Wi-Fi deployments. What happens to the network if the OC200 goes offline? Omada devices continue to operate normally if the controller goes offline — existing configurations are maintained and clients remain connected. The controller is only required for making configuration changes and management tasks.

Read more less

8-Port PoE+ Desktop Switch with Extend Mode, Isolation and Priority Control The TP-Link TL-SF1009P is a compact, plug-and-play unmanaged desktop switch with eight 802.3af/at PoE+ ports and a 65W total power budget. Beyond basic PoE switching, it includes Extend Mode for 250m cable runs, Isolation Mode for one-click client traffic separation, and Priority Mode for latency-sensitive devices — making it a feature-rich solution for small CCTV installations, wireless access point deployments, and shared network environments across Australia, all without any configuration required. Key Features 8× PoE+ Ports (802.3af/at): Power IP cameras, access points, VoIP phones, and other PoE/PoE+ devices at up to 30W per port via a single Ethernet cable — no separate power adapters needed. 65W Total PoE Budget: Shared across all eight PoE+ ports, supporting a mix of standard PoE and PoE+ devices simultaneously. Extend Mode (up to 250m): Extends data and PoE power delivery up to 250m at 10Mbps on ports 1–4 or ports 1–8 — ideal for cameras positioned far from the switch in large properties. Priority Mode (Ports 1–2): Prioritises traffic on ports 1 and 2 to guarantee consistent performance for latency-sensitive devices such as IP cameras and NVRs. Isolation Mode (Ports 1–8): One-click client traffic separation prevents devices on different ports from communicating directly with each other — improving security in shared environments such as retail stores, hotels, and apartment buildings. Plug & Play: No configuration, software, or management interface required — modes are toggled via physical buttons on the unit. Fanless & Silent: Completely silent operation — suitable for offices, reception areas, and home installations. Physical Security Lock: Kensington-style lock slot for securing the unit in shared or public spaces. Compact Desktop Form Factor: Small footprint (171 × 98 × 27mm) fits easily on a desk, shelf, or inside a cabinet. Common Use Cases Small CCTV installations with up to 8 IP cameras Long cable run installations using Extend Mode (up to 250m) for perimeter cameras Shared network environments requiring client isolation (e.g. guest Wi-Fi, retail kiosks, hotel rooms) Multi-access-point Wi-Fi deployments in small offices or retail stores VoIP phone deployments in reception areas or small teams Replacing multiple PoE injectors with a single, clean 8-port solution Technical Specifications Model TL-SF1009P Total Ports 9× 10/100Mbps RJ45 PoE+ Ports 8× (Ports 1–8), IEEE 802.3af/at Max PoE Per Port 30W (802.3at) Total PoE Budget 65W Switching Capacity 1.8 Gbps Packet Forwarding Rate 1.3392 Mpps MAC Address Table 2K Jumbo Frame 2KB Transmission Method Store-and-Forward Extend Mode Range Up to 250m at 10Mbps (Ports 1–4 or 1–8) Priority Mode Ports 1–2 (high priority) Isolation Mode Ports 1–8 (one-click client separation) Fan Fanless (silent) Physical Security Lock Yes Power Supply External adapter — 53.5V DC / 1.31A Max Power Consumption 3.6W (no PD) / 77.08W (full PoE load) Dimensions (W × D × H) 171 × 98 × 27mm Operating Temperature 0°C to 40°C Frequently Asked Questions Is the TL-SF1009P managed or unmanaged? It is an unmanaged switch. There is no web interface, app, or software required — it operates automatically with no configuration needed. Extend Mode, Priority Mode, and Isolation Mode are all toggled via physical buttons on the unit. How does Extend Mode work on the TL-SF1009P? Pressing the Extend Mode button reduces port speed to 10Mbps and extends the maximum cable distance from 100m to 250m. On the TL-SF1009P, Extend Mode can be applied to ports 1–4 only, or to all ports 1–8, depending on your deployment needs. This is particularly useful for IP cameras installed at the perimeter of a large property. What is Isolation Mode and when should I use it? Isolation Mode prevents devices connected to ports 1–8 from communicating directly with each other, while still allowing all devices to access the uplink port (port 9). It's ideal for shared environments — such as hotels, retail stores, or apartment buildings — where you want to keep client devices separated for security without needing a managed switch. How does the TL-SF1009P compare to the TL-SG1210MP? The TL-SG1210MP offers Gigabit speeds (vs 100Mbps), a higher 123W PoE budget (vs 65W), PoE Auto Recovery, a combo SFP/RJ45 uplink port, and 10 total ports. The TL-SF1009P is the more compact, lower-cost option for smaller deployments where Gigabit speeds and a higher power budget are not required. Can I power a PTZ camera with this switch? It depends on the PTZ camera's power requirement. The TL-SF1009P supports up to 30W per port (802.3at PoE+), which covers most compact PTZ cameras. High-power PTZ cameras requiring more than 30W will need a dedicated power supply or a higher-wattage PoE injector. What is the total PoE budget and how should I plan my deployment? The total shared PoE budget is 65W across all eight PoE+ ports. For example, 8 cameras drawing 8W each would use 64W — just within budget. If you have higher-power devices, calculate your total load carefully. For deployments requiring more headroom, consider the TL-SG1210MP (123W) or TL-SG1218MP (250W).

Read more less

8-Port Desktop Switch with 4 PoE Ports, Extend Mode and Priority Control The TP-Link TL-SF1008LP is a compact, plug-and-play unmanaged desktop switch with four 802.3af PoE ports, a 41W total power budget, and Extend Mode for cable runs up to 250m. With Priority Mode for latency-sensitive devices and a completely fanless design, it's a practical, low-cost solution for small CCTV installations, IP phone deployments, and wireless access point setups in homes, small offices, and retail environments across Australia. Key Features 4× PoE Ports (802.3af, Ports 1–4): Power IP cameras, access points, VoIP phones, and other 802.3af-compliant devices without separate power adapters — data and power over a single Ethernet cable. 41W Total PoE Budget: Shared across all four PoE ports — sufficient for most small deployments with standard 802.3af devices. 8× 10/100Mbps RJ45 Ports: Four PoE-enabled ports (1–4) plus four standard ports (5–8) for connecting non-PoE devices such as PCs, NVRs, and routers. Extend Mode (up to 250m): Pressing the Extend Mode button reduces port speed to 10Mbps and extends the maximum cable distance from 100m to 250m on ports 1–4 — ideal for cameras positioned far from the switch. Priority Mode (Ports 1–2): Prioritises traffic on ports 1 and 2 to guarantee consistent performance for latency-sensitive devices such as IP cameras and VoIP phones. Plug & Play: No configuration, software, or management interface required — Extend Mode and Priority Mode are toggled via physical buttons on the unit. Fanless & Silent: Completely silent operation — suitable for offices, reception areas, and home installations. Physical Security Lock: Kensington-style lock slot for securing the unit in shared or public spaces. Compact Form Factor: Small desktop footprint (171 × 98 × 27mm) fits easily on a desk, shelf, or inside a cabinet. Common Use Cases Powering 1–4 IP security cameras in small CCTV systems Connecting and powering wireless access points in small offices or retail stores VoIP phone deployments in reception areas or small teams Extending camera cable runs beyond the standard 100m Ethernet limit using Extend Mode Home network expansion with PoE device support Replacing multiple PoE injectors with a single, clean 4-port solution Technical Specifications Model TL-SF1008LP Total Ports 8× 10/100Mbps RJ45 PoE Ports 4× (Ports 1–4), IEEE 802.3af Total PoE Budget 41W Switching Capacity 1.6 Gbps MAC Address Table 2K Transmission Method Store-and-Forward Extend Mode Range Up to 250m at 10Mbps (Ports 1–4) Priority Mode Ports 1–2 (high priority) Fan Fanless (silent) Physical Security Lock Yes Power Supply External adapter — 53.5V DC / 0.81A Max Power Consumption 2.2W (no PD) / 47.1W (full PoE load) Dimensions (W × D × H) 171 × 98 × 27mm Operating Temperature 0°C to 40°C Operating Humidity 10–90% RH (non-condensing) Certifications FCC, CE, RoHS In the Box TL-SF1008LP, Power Adapter, Installation Guide Frequently Asked Questions What is the difference between the TL-SF1008LP and the TL-SF1005LP? The TL-SF1008LP has 8 total ports (4 PoE + 4 standard) compared to the TL-SF1005LP's 5 total ports (4 PoE + 1 standard). Both share the same 41W PoE budget, Extend Mode, and Priority Mode features. Choose the TL-SF1008LP if you need more non-PoE ports for connecting additional devices such as a PC, NVR, or router alongside your PoE cameras. Is the TL-SF1008LP managed or unmanaged? It is an unmanaged switch. There is no web interface, app, or software required — it operates automatically with no configuration needed. Extend Mode and Priority Mode are toggled via physical buttons on the unit. What is the maximum PoE power per port? Each PoE port supports up to 15.4W (IEEE 802.3af standard). The total shared PoE budget across all four ports is 41W, so plan your device load accordingly. For example, four cameras drawing 10W each would use 40W — just within the 41W budget. Can I use it with 802.3at (PoE+) devices? The TL-SF1008LP supports 802.3af only (up to 15.4W per port). It is not compatible with 802.3at PoE+ devices that require more than 15.4W. For PoE+ devices, consider the TL-SF1009P (65W, 8 PoE+ ports) or TL-SG1210MP (123W, 8 PoE+ Gigabit ports). How does Extend Mode work? Pressing the Extend Mode button reduces port speed to 10Mbps on ports 1–4 and extends the maximum cable distance from 100m to 250m. This is particularly useful for IP cameras installed at the perimeter of a large property where running a new cable closer to the switch is impractical. What is the difference between the TL-SF1008LP and the TL-SF1009P? The TL-SF1009P has 9 ports with 8 PoE+ ports (802.3at, up to 30W per port) and a 65W total budget, plus Isolation Mode for client traffic separation. The TL-SF1008LP has 8 ports with 4 PoE ports (802.3af, up to 15.4W per port) and a 41W budget. Choose the TL-SF1009P if you need more PoE ports, higher per-port power, or client isolation; choose the TL-SF1008LP for a simpler, lower-cost 4-port PoE solution.

Read more less

TP-Link MC210CS Gigabit Single-Mode Media Converter The TP-Link MC210CS converts Gigabit Ethernet copper (RJ45) to 1000BASE-LX single-mode fibre (SC connector) — and back again — extending your network up to 15km over a single-mode fibre run. It operates at full wire speed in full-duplex mode and works as a standalone desktop unit or slots into TP-Link’s 19-inch media converter chassis for rack-based deployments. Key Features Converts 1000BASE-T copper (RJ45) to 1000BASE-LX/LH single-mode fibre (SC/UPC) and vice versa Extends fibre distance up to 15km over 9/125μm single-mode fibre 1000Mbps full-duplex operation on both TX (copper) and FX (fibre) ports 1310nm wavelength on both transmit and receive Auto MDI/MDIX on RJ45 port — no crossover cables required Force/Auto transfer mode switch for the FX fibre port Standalone desktop use or compatible with TP-Link 19-inch chassis (no chassis required) Front-panel LED indicators: PWR, LINK, RX for at-a-glance status monitoring IEEE 802.3ab, 802.3z, and 802.3x compliant FCC, CE, and RoHS certified Use Cases Building-to-building links — bridge copper LAN infrastructure between separate structures over existing single-mode fibre runs up to 15km Security and surveillance networks — extend Gigabit connectivity from a central NVR or switch to remote camera clusters across a campus or industrial site ISP and telco last-mile — convert fibre feeds to copper for customer-premises equipment where fibre termination is not available Rack deployments — slot into a TP-Link chassis for high-density, managed media conversion in a comms room or data centre Specifications Specification Detail Model MC210CS Standards IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Copper Port 1 x 1000M RJ45 (Auto MDI/MDIX) Fibre Port 1 x 1000M SC/UPC Wavelength 1310nm (TX and RX) Fibre Type 1000BASE-FX Single-Mode Fibre (SMF) Max. Fibre Distance 15km Max. Copper Distance 100m (Cat5/5e UTP or 100Ω STP) Transfer Mode Full Duplex, Flow Control (IEEE 802.3x) LED Indicators PWR, LINK, RX Power Supply External power adapter Max. Power Consumption 5.5W Dimensions (W × D × H) 94.5 × 73.0 × 27.0mm Operating Temperature 0–40°C Storage Temperature -40–70°C Operating Humidity 10–90% RH, Non-Condensing Certifications FCC, CE, RoHS SKU / Barcode MC210CS / 1210002611053 Weight 0.36kg Frequently Asked Questions What type of fibre cable does the MC210CS require? The MC210CS requires 9/125μm single-mode fibre (SMF) with SC/UPC connectors. It is not compatible with multi-mode fibre or LC-terminated cables without an adapter. Does it need a chassis, or can it run standalone? It runs perfectly as a standalone desktop unit using the included external power adapter. It can also be installed into a TP-Link 19-inch media converter chassis for rack-based deployments — no chassis is required for standalone use. What is the maximum copper cable length? The RJ45 copper port supports up to 100m using Cat5, Cat5e UTP, or 100Ω STP cabling — standard for Gigabit Ethernet copper runs. Can I use the MC210CS with any Gigabit switch? Yes. The RJ45 port is standard 1000BASE-T and connects to any Gigabit Ethernet switch or NIC. Auto MDI/MDIX means straight-through or crossover cables both work. What does the Force/Auto switch on the FX port do? The FX port has a physical switch to set the fibre link to Auto-negotiation or Force mode. Force mode is useful when connecting to devices that do not support auto-negotiation on the fibre side, ensuring a stable link is established. Does it ship Australia-wide? Yes. CCTV Guru ships the MC210CS Australia-wide from local stock.

Read more less

Ubiquiti U Fiber Multi-Mode Module 10G 2-packSupported Media:Multi-Mode FiberConnector Type:2x LCTX Wavelength:850 nmRX Wavelength:850 nmData Rate:10 Gbps SFP+Cable Distance:300m

Read more less

Ubiquiti Instant 8023af Adapter Indoor Gigabit

Read more less

Ubiquiti PoE Injector, 24VDC, 12W, Gigabit Ethernet, ESD protection & LED Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:Features: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors

Read more less

Ubiquiti U Fiber Single-Mode Module 1G BiDi 2-packSupported Media:Single-Mode FiberConnector Type:1x LCTX Wavelength:1310 nm Blue 1550nm YellowRX Wavelength:1550 nm Blue 1310nm YellowData Rate:1.25 Gbps SFP+Cable Distance:3 km

Read more less

Ubiquiti UniFi Access Reader G2 Professional, 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock This is a 2-Way Intercom, Unlock Via NFC or Unifi Identity, IP55 Weather Resistance, Pin Unlock. Empower employees with a wide variety of unlock options suitable for any weather conditions. Features: Unlock using an NFC card or UniFi Identity mobile app Doorbell to unlock, triggering the intercom with a video of a visitor Video works at ADA-compliant mounting height PIN unlocking on the screen Connects to UniFi Access Hub using PoE IP55 rain resistance (-10 to 40° C) Technical Specifications Mechanical Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") Weight 136 g (4.8 oz) Enclosure material Polycarbonate, glass Mount material Aluminum alloy Mounting Wall, gang box Weatherproofing IP55 Hardware Networking interface (1) GbE RJ45 port Connectivity BLE 4.2NFC Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 6W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensor Proximity sensor Camera 4000 x 3000, 12 MP, 30 FPS View angle H: 96.67°, V: 123.15°, D: 153.11° Microphone Yes Speaker (1) 4 ohm, 1.5W LEDs R/G/B/WFlash Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire Operating environment Outdoor use Ambient operating temperature Device: -30 to 45° C (-22 to 113° F)Display:* -10 to 45° C (14 to 113° F)*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v1.3.28) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2-Pro/UA-G2-Pro-Black, V02 LED System Steady blue: Adopted/device is readySteady white: Pending adoptionBlinking white/blue: Upgrading firmwareStrobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and later Downloads Installation Guide

Read more less

60 GHz PtMP station powered by Wave Technology Can connect to a Wave AP and deliver 2 Gbps total throughput (1 Gbps duplex). The Wave Nano is equipped with a high-performance 5GHz backup radio to ensure uninterrupted connection and a Bluetooth radio to simplify setup via the UISP® Mobile app Features 5 GHz backup radio Link range: up to 5 km Router mode support Integrated GPS antenna Link planning support via ISP Design Center Downloads DatasheetInstallation Guide

Read more less

60 GHz PtMP access point powered by Wave Technology.The Wave Access Point can connect up to 15 stations and deliver up to 5.4 Gbps total throughput (2.7 Gbps duplex). It is equipped with a high-performance 5 GHz backup radio to ensure uninterrupted connection, as well as a Bluetooth radio to simplify setup in the UISP® Mobile app.Features: 5 GHz backup radio Supported stations and distances: Wave Long-Range: up to 8 km Wave Nano: up to 5 km WAN Ports: (1) 10G SFP+, (1) 2.5GbE Integrated GPS antenna Link planning support via the ISP Design Center Managed with UISP application: Version 1.5.7 and later Downloads Datasheet Installation Guide

Read more less

19-Inch Rack Mount Kit for TP-Link Switches and Compatible Devices The TP-Link RACKMOUNT KIT-19 is a 19-inch rack mount kit designed to securely install compatible TP-Link desktop switches and other devices into a standard 19-inch equipment rack or comms cabinet. Made from sturdy metal with a reliable mounting design, it converts desktop-form-factor switches into rack-mountable units for clean, professional installations in server rooms, comms cabinets, and network enclosures across Australia. Key Features 19-Inch Rack Compatible: Fits standard 19-inch equipment racks and comms cabinets — converts compatible TP-Link desktop switches to rack-mountable form factor. Sturdy Metal Construction: Reliable metal materials selected for strength and durability — holds the switch securely without risk of loosening over time. Wide Compatibility: Compatible with a range of TP-Link 19-inch rack mount switches and other products. If unsure of compatibility, measure the mounting ear size and hole spacing of your switch and compare against the kit dimensions before purchasing. Easy Installation: Straightforward mounting design for quick, firm installation in professional rack environments. Common Use Cases Rack-mounting compatible TP-Link desktop switches in server rooms and comms cabinets Tidying up network installations by moving desktop switches into a standard 19-inch rack Professional CCTV and IT installations requiring all equipment to be rack-mounted Technical Specifications Model RACKMOUNT KIT-19 Rack Size 19-inch standard Material Metal Compatibility Compatible TP-Link 19-inch rack mount switches (verify mounting ear size and hole spacing before purchase) Weight 140g Frequently Asked Questions How do I know if this kit is compatible with my TP-Link switch? The RACKMOUNT KIT-19 is compatible with a range of TP-Link switches designed for 19-inch rack mounting. To confirm compatibility, measure the size of the mounting ears and the hole spacing on your switch and compare against the kit's dimensions. If you're unsure, contact us before purchasing and we can advise on compatibility for your specific model. Does it work with non-TP-Link switches? The kit is designed and tested for use with compatible TP-Link products. It may fit other brands if the mounting ear dimensions and hole spacing match, but compatibility with non-TP-Link devices is not guaranteed. What is included in the kit? The kit includes the rack mount brackets and associated mounting hardware required to install a compatible switch into a standard 19-inch rack. Refer to the product packaging for the full contents list.

Read more less

TP-Link TL-SF1024 24-Port 10/100Mbps Rackmount Unmanaged Switch A cost-effective, high-port-count Fast Ethernet switch built for the rack. The TP-Link TL-SF1024 delivers 24 ports of 10/100Mbps connectivity in a standard 19-inch, 1U steel rackmount chassis — complete with a rackmount kit included in the box. With plug-and-play simplicity, fanless silent operation, and Green Technology saving up to 75% power, it’s a reliable, low-maintenance choice for comms cabinets, server rooms, and small business network infrastructure. Key Features 24 × 10/100Mbps Auto-Negotiation RJ45 ports for reliable Fast Ethernet connectivity Auto MDI/MDIX on all ports — no crossover cables required 4.8Gbps switching capacity with a 3.57Mpps packet forwarding rate 8K MAC address table with auto-learning 2Mb buffer memory for handling traffic bursts Store-and-forward switching for error-free packet delivery IEEE 802.3x flow control for reliable, congestion-free data transfer Green Technology — saves up to 75% power by adjusting consumption based on link status and cable length Fanless design — completely silent operation Standard 19-inch, 1U steel rackmount case — rackmount kit and rubber feet included Internal power supply (100–240V AC) — no external adapter required FCC, CE, and RoHS certified Plug and play — no configuration or software required Use Cases Comms cabinet or server room deployments requiring a high-port-count Fast Ethernet switch Expanding wired network capacity in small to medium offices or retail environments Upgrading legacy 10Mbps networks to Fast Ethernet (100Mbps) Connecting up to 24 wired devices in a cost-effective, unmanaged rack setup Energy-conscious deployments where low power draw and silent operation are priorities Specifications Specification Detail Model TL-SF1024 Ports 24 × 10/100Mbps RJ45 Standards IEEE 802.3i, 802.3u, 802.3x Switching Capacity 4.8 Gbps Packet Forwarding Rate 3.57 Mpps MAC Address Table 8K Buffer Memory 2Mb Transfer Method Store-and-Forward Flow Control IEEE 802.3x Energy Saving Up to 75% (Green Technology) Fan Fanless (silent) Power Supply Internal — 100–240V AC, 50/60Hz Max Power Consumption 3.53W (220V/50Hz) Mounting 19-inch rackmount, 1U (kit included) Case Steel Dimensions (W × D × H) 440 × 180 × 44 mm Operating Temperature 0°C – 40°C Certifications FCC, CE, RoHS Weight 2.26 kg In the Box Switch, power cord, rackmount kit, rubber feet, installation guide SKU TL-SF1024 Vendor TP-Link Recommended Accessories TP-Link TL-SG1024D 24-Port Gigabit Unmanaged Switch — upgrade option for full Gigabit speeds in the same form factor TP-Link TL-SG1024DE 24-Port Gigabit Easy Smart Switch — adds VLAN, QoS, and web management Cat5e Ethernet patch cables — for reliable 100Mbps connections throughout your installation 19-inch rack cabinet or patch panel — for structured cabling in comms cabinets Frequently Asked Questions Does the TL-SF1024 require any configuration? No. It is a fully unmanaged, plug-and-play switch. Connect your Ethernet cables and it works immediately — no software, login, or setup required. Does the rackmount kit come included? Yes. The TL-SF1024 includes a rackmount kit, power cord, rubber feet, and installation guide in the box. No additional accessories are required for standard 19-inch rack installation. What is the difference between the TL-SF1024 and the TL-SG1024D? The TL-SF1024 supports 10/100Mbps (Fast Ethernet). The TL-SG1024D supports 10/100/1000Mbps (Gigabit Ethernet), offering up to 10× faster throughput. If your devices and cabling support Gigabit, the TL-SG1024D is the better long-term investment at a similar price point. Is the TL-SF1024 suitable for CCTV and IP camera networks? Yes, for installations where 100Mbps bandwidth is sufficient per camera. For higher-resolution IP cameras or NVR systems requiring more bandwidth, a Gigabit switch such as the TL-SG1024D is recommended. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link TL-SF1048 48-Port 10/100Mbps Rackmount Switch The TP-Link TL-SF1048 is a reliable, plug-and-play 48-port Fast Ethernet rackmount switch designed for small to medium-sized business networks. With a compact 19-inch rack-mountable steel chassis and energy-efficient design, it delivers consistent wired connectivity without the complexity of managed switches. Key Features 48 x 10/100Mbps RJ45 ports for high-density wired connections 9.6Gbps non-blocking switching capacity for maximum throughput Energy-efficient technology reduces power consumption by up to 50% 100% data filtering rate eliminates all error packets Supports IEEE 802.3x flow control (Full Duplex) and backpressure (Half Duplex) Auto-MDI/MDIX on all ports — no crossover cables required MAC address auto-learning and auto-aging N-Way Auto-Negotiation and Store-and-Forward switching 19-inch rack-mountable steel case — fits standard server racks Plug-and-play — no software or configuration required Use Cases Small to medium business offices — expand wired network ports without managed switch complexity Security and surveillance installations — connect IP cameras, NVRs, and access control devices on a dedicated network segment Server rooms and comms racks — rack-mount alongside patch panels and other 19-inch equipment Education and hospitality — cost-effective high-port-count switching for classrooms, hotels, and venues Specifications Specification Detail Model TL-SF1048 Ports 48 x 10/100Mbps RJ45 Switching Capacity 9.6Gbps Switching Method Store and Forward MAC Address Table Auto-learning and auto-aging Flow Control IEEE 802.3x (Full Duplex), Backpressure (Half Duplex) MDI/MDIX Auto on all ports Form Factor 19-inch Rackmount, 1U Enclosure Steel Weight 2.58 kg SKU / Barcode TL-SF1048 / 6935364021702 Energy Saving Up to 50% power reduction Management Unmanaged (Plug and Play) Frequently Asked Questions Is the TL-SF1048 a managed or unmanaged switch? It is an unmanaged switch. There is no web interface, CLI, or software required — simply plug in your cables and it works immediately. Can I rack-mount the TL-SF1048? Yes. The TL-SF1048 fits a standard 19-inch equipment rack and occupies 1U of rack space. Rack-mount brackets are included. Does it support VLANs or QoS? No. As an unmanaged switch, it does not support VLANs, QoS, or port mirroring. For those features, consider a managed switch from the TP-Link TL-SG series. Is it suitable for IP camera networks? Yes. The TL-SF1048 is well-suited for connecting IP cameras and NVRs on a dedicated Fast Ethernet segment, particularly in installations where PoE is provided by a separate injector or PoE switch upstream. Does it ship Australia-wide? Yes. CCTV Guru ships the TL-SF1048 Australia-wide from local stock.

Read more less

TP-Link TL-SF1016D 16-Port 10/100Mbps Desktop/Wall-Mount Switch Simple, silent, and energy-efficient wired networking for 16 devices. The TP-Link TL-SF1016D is a compact, fanless 10/100Mbps switch in a plastic desktop case that also supports wall mounting — giving you flexible placement options in offices, retail spaces, or home environments. With plug-and-play operation and Green Ethernet technology saving up to 80% power, it’s a low-maintenance, cost-effective choice for expanding a wired network. Key Features 16 × 10/100Mbps Auto-Negotiation RJ45 ports for reliable Fast Ethernet connectivity Auto MDI/MDIX on all ports — no crossover cables required Green Ethernet technology — saves up to 80% power by adjusting consumption based on link status and cable length IEEE 802.3x flow control for reliable, congestion-free data transfer Store-and-forward switching for error-free packet delivery 2K MAC address table with auto-learning Fanless design — completely silent operation Plastic desktop case with wall-mount support — flexible installation options External power adapter (5V/0.6A) — ultra-low max power consumption of 3.23W Plug and play — no configuration or software required FCC, CE, and RoHS certified Use Cases Expanding wired connectivity in small offices, home offices, or retail counters Wall-mounting in comms rooms or behind desks for a tidy, space-saving installation Connecting up to 16 wired devices without the need for managed features Energy-conscious deployments where low power draw is a priority Replacing ageing 10Mbps hubs with a modern Fast Ethernet switch Specifications Specification Detail Model TL-SF1016D Ports 16 × 10/100Mbps RJ45 Switching Capacity 3.2 Gbps MAC Address Table 2K Auto-Negotiation / MDI/MDIX Yes (all ports) Transfer Method Store-and-Forward Flow Control IEEE 802.3x Energy Saving Up to 80% (Green Ethernet) Fan Fanless (silent) Power Supply External adapter — 5.0V DC / 0.6A Max Power Consumption 3.23W (220V/50Hz) Max Heat Dissipation 11.01 BTU/h Mounting Desktop or wall-mount Case Plastic Dimensions (W × D × H) 200 × 142 × 40 mm Certifications FCC, CE, RoHS Weight 600 g SKU TL-SF1016D Vendor TP-Link Recommended Accessories TP-Link TL-SF1005D 5-Port Fast Ethernet Switch — compact companion for smaller sub-networks TP-Link TL-SG1016D 16-Port Gigabit Switch — upgrade option for full Gigabit speeds Cat5e Ethernet patch cables — for reliable 100Mbps connections throughout your installation Frequently Asked Questions Does the TL-SF1016D require any configuration? No. It is a fully unmanaged, plug-and-play switch. Connect your Ethernet cables and it works immediately — no software, login, or setup required. Can the TL-SF1016D be wall-mounted? Yes. The plastic case includes wall-mount support, making it easy to mount behind a desk, in a comms room, or on any flat surface for a tidy, space-saving installation. What is the difference between the TL-SF1016D and the TL-SF1016DS? The TL-SF1016D is a plastic desktop/wall-mount switch with an external power adapter. The TL-SF1016DS features a 13-inch steel rackmount case with an internal power supply, making it better suited to rack-based comms cabinet deployments. What is the difference between the TL-SF1016D and the TL-SG1016D? The TL-SF1016D supports 10/100Mbps (Fast Ethernet). The TL-SG1016D supports 10/100/1000Mbps (Gigabit Ethernet), offering up to 10× faster throughput. If your devices and cabling support Gigabit, the TL-SG1016D is the better long-term investment. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link TL-SF1008P 8-Port Fast Ethernet Unmanaged PoE Switch Power and connect your IP cameras, access points, and VoIP phones over a single cable. The TP-Link TL-SF1008P is a compact, fanless 8-port 10/100Mbps unmanaged switch with 4 IEEE 802.3af PoE ports and a 57W total power budget. No configuration required — simply plug in your devices and the switch automatically detects and supplies power to any 802.3af-compliant powered device (PD). Ideal for small surveillance systems, home offices, and anywhere a tidy single-cable installation is preferred. Key Features 8 × 10/100Mbps RJ45 ports with Auto-Negotiation and Auto MDI/MDIX 4 × IEEE 802.3af PoE ports (ports 1–4) — up to 15.4W per port, 57W total PoE budget Automatically detects and powers 802.3af-compliant devices — no manual configuration 1.6Gbps backplane bandwidth for non-blocking switching performance 2K MAC address table with auto-learning Fanless design — completely silent operation, ideal for office and home environments External 48V DC power adapter — compact and lightweight chassis Supports Cat3/4/5 cable up to 100m (10BASE-T) and Cat5/5e up to 100m (100BASE-TX) Plug and play — no software, no login, no configuration required Use Cases Powering and connecting IP cameras in small CCTV and surveillance installations Connecting wireless access points via PoE in home or small office environments Powering VoIP desk phones without separate power adapters Small business reception areas, retail counters, or meeting rooms needing tidy single-cable runs Expanding a home or office network with PoE capability for smart devices Specifications Specification Detail Model TL-SF1008P Total Ports 8 × 10/100Mbps RJ45 PoE Ports 4 (ports 1–4) PoE Standard IEEE 802.3af PoE Power Per Port Up to 15.4W Total PoE Budget 57W Backplane Bandwidth 1.6 Gbps MAC Address Table 2K (auto-learning) Auto-Negotiation / MDI/MDIX Yes (all ports) Fan Fanless (silent) Power Supply External adapter — 48V DC / 1.25A Max Power Consumption (PoE on) 60.2W (220V/50Hz) Max Power Consumption (PoE off) 3.2W (220V/50Hz) Dimensions (W × D × H) 171 × 98 × 27 mm Form Factor Desktop Weight 1.04 kg SKU TL-SF1008P Vendor TP-Link Recommended Accessories TP-Link TL-SG1008P 8-Port Gigabit PoE Switch — upgrade option with Gigabit speeds on all ports TP-Link TL-POE10R Gigabit PoE Splitter — add PoE power to non-PoE devices on the same network Cat5e Ethernet patch cables — for reliable 100Mbps and PoE connections up to 100m IP cameras compatible with IEEE 802.3af — power and connect over a single cable Frequently Asked Questions What is the difference between the TL-SF1008P and the TL-SG1008P? The TL-SF1008P is a Fast Ethernet switch with 10/100Mbps ports and a 57W PoE budget. The TL-SG1008P is a Gigabit switch with 10/100/1000Mbps ports and a 53W PoE budget. If your IP cameras or devices support Gigabit, the TL-SG1008P offers faster data throughput. Both support IEEE 802.3af PoE. How many PoE devices can I connect to the TL-SF1008P? The TL-SF1008P has 4 PoE-capable ports (ports 1–4), each delivering up to 15.4W. The total PoE budget is 57W. For example, four cameras drawing 12W each would use 48W of the 57W budget, leaving headroom for the remaining power draw. Which PoE standard does the TL-SF1008P support? It supports IEEE 802.3af (PoE), providing up to 15.4W per port. It does not support 802.3at (PoE+) or 802.3bt (PoE++). Ensure your powered devices are 802.3af-compliant before purchasing. Does the TL-SF1008P require any configuration? No. It is a fully unmanaged, plug-and-play switch. It automatically detects and powers 802.3af-compliant devices — no software, login, or setup required. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link PA9020P – AV2000 Gigabit Powerline Adapter Starter Kit with AC Pass Through The TP-Link PA9020P is TP-Link’s flagship powerline adapter kit, delivering up to 2000Mbps over your existing electrical wiring using the latest HomePlug AV2 standard. With two Gigabit Ethernet ports per adapter, 2×2 MIMO with Beamforming, and an integrated AC pass-through socket, it’s engineered for households and small businesses that demand the fastest, most stable wired connection possible — without running new cable. Key Features AV2000 HomePlug AV2 Speed: Up to 2000Mbps powerline throughput — the fastest HomePlug AV2 standard available — for 4K streaming, large file transfers, and low-latency gaming. 2×2 MIMO with Beamforming: Multiple simultaneous data streams with intelligent signal focusing deliver higher speeds and greater stability compared to single-stream powerline adapters. 2 × Gigabit Ethernet Ports: Connect two wired devices per adapter — ideal for a smart TV and a gaming console, or a NVR and a network switch — at full Gigabit speeds. AC Pass-Through Power Socket: Integrated power outlet on each adapter means you don’t sacrifice a wall socket to gain two network ports. 300-Metre Range: Covers up to 300 metres of electrical wiring, suitable for most Australian homes and small commercial premises. Plug and Play: No configuration required — plug in and press the Pair button to create an encrypted, secure network connection instantly. 128-bit AES Encryption: Push-button pairing creates a private, encrypted powerline network automatically. QoS Support: Up to 4-level Type of Service (ToS) QoS and 8-level VLAN priority for prioritising latency-sensitive traffic such as video and VoIP. Power-Saving Mode: Automatically reduces power consumption by up to 85% when no data is being transmitted. Broad Compatibility: Works with AV2000, AV1200, AV1000, AV600, AV500, and AV200 powerline adapters for mixed-network flexibility. Australian Plug Type: Supplied with AU-standard plugs for direct compatibility with Australian power outlets. Ideal Use Cases Delivering Gigabit wired connectivity to smart TVs, NAS drives, and gaming consoles in rooms with poor Wi-Fi coverage. Connecting IP cameras, NVRs, or network switches to a router across multiple floors without running new Ethernet cable. High-bandwidth home office setups requiring stable, low-latency wired internet access away from the router. Multi-device entertainment setups where both a media player and a console need wired connections from a single adapter. Rental properties, heritage buildings, or commercial tenancies where cable runs are impractical or prohibited. Upgrading an existing AV600 or AV1000 powerline network to AV2000 speeds while retaining backward compatibility. Technical Specifications Specification Detail Model TL-PA9020P KIT (2 × PA9020P) Powerline Standard HomePlug AV2, HomePlug AV, IEEE 1901, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Powerline Speed Up to 2000Mbps MIMO 2×2 with Beamforming Gigabit Ethernet Ports 2 × 10/100/1000Mbps (RJ45) per adapter AC Pass-Through Socket Yes (integrated power outlet) Plug Type AU (Australian standard) Range Up to 300 metres (electrical wiring) Encryption 128-bit AES (push-button pairing) Modulation OFDM QoS Up to 4-level ToS; up to 8-level VLAN priority Power Consumption (Max) 5.8W @ 230V/50Hz Power Consumption (Standby) 0.5W @ 230V/50Hz Power Saving Up to 85% reduction in idle mode Compatibility AV2000 / AV1200 / AV1000 / AV600 / AV500 / AV200 powerline adapters LED Indicators Power, Powerline, Ethernet Dimensions 131 × 72 × 42 mm Weight 0.74kg (kit) SKU TL-PA9020P KIT Barcode (EAN) 6935364097356 What’s in the Box 2 × PA9020P AV2000 Gigabit Powerline Adapter with AC Pass Through 2 × RJ45 Ethernet Cables Quick Installation Guide Frequently Asked Questions What makes the PA9020P different from the TL-PA4010PKIT? The PA9020P uses the newer HomePlug AV2 standard with 2×2 MIMO and Beamforming, delivering up to 2000Mbps — more than three times the 600Mbps of the TL-PA4010PKIT. It also includes two Gigabit Ethernet ports per adapter (versus one Fast Ethernet port), making it significantly better suited for 4K streaming, NAS access, and multi-device setups. Can I connect two devices to each adapter? Yes. Each PA9020P adapter has two Gigabit Ethernet ports, allowing you to connect two wired devices — such as a smart TV and a gaming console, or an NVR and a network switch — from a single wall outlet. Will the PA9020P work with my existing AV600 or AV1000 powerline adapters? Yes. The PA9020P is backward compatible with AV2000, AV1200, AV1000, AV600, AV500, and AV200 HomePlug adapters. Mixed-standard networks will operate at the speed of the slower adapter on each link. Does the AC pass-through socket affect powerline performance? The integrated socket includes filtering to minimise electrical noise from plugged-in devices, helping maintain consistent powerline speeds. For best performance, avoid plugging power strips or devices with large motors (such as vacuum cleaners) into the pass-through socket. Is this kit compatible with Australian power outlets? Yes. The PA9020P KIT is supplied with Australian-standard (Type I) plugs and is rated for 230V/50Hz operation, making it fully compatible with Australian power points. Do I need to configure anything to get it working? No. Plug one adapter into a power point near your router and connect it via Ethernet, then plug the second adapter wherever you need connectivity. Press the Pair buttons on both adapters within two minutes to create an encrypted connection — no software or web interface required. Can I add more PA9020P adapters to expand the network? Yes. Additional HomePlug AV2-compatible adapters can be added to extend coverage to more rooms. Each adapter added to the network must be paired using the Pair button process.

Read more less

Gigabit Multi-WAN VPN Router with Omada SDN and Enterprise-Grade Security The TP-Link TL-ER7206 SafeStream is a Gigabit multi-WAN VPN router designed for small to medium businesses that require reliable internet connectivity, secure remote access, and centralised network management. With up to four WAN ports (including a Gigabit SFP WAN), support for 100 simultaneous IPsec VPN tunnels, and full integration with TP-Link's Omada SDN platform, it delivers enterprise-grade routing, security, and cloud management at an accessible price point — ideal for multi-site business networks, retail chains, and professional CCTV and IT installations across Australia. Key Features Up to 4 WAN Ports: 1× Gigabit SFP WAN, 1× Gigabit RJ45 WAN, and 2× configurable Gigabit WAN/LAN ports — enabling load balancing and failover across multiple ISP connections for maximum uptime. Highly Secure VPN: Supports up to 100× LAN-to-LAN IPsec, 50× OpenVPN, 50× L2TP, and 50× PPTP simultaneous VPN connections — ideal for secure remote access and site-to-site connectivity. Omada SDN Integration: Centrally manage alongside Omada switches and access points via cloud or local controller — with Zero-Touch Provisioning (ZTP) for rapid remote deployment across multiple sites. Centralised Cloud Management: Monitor and configure the router from anywhere via the Omada cloud platform or Omada app on iOS and Android. Advanced Firewall & Security: Comprehensive security suite including DoS defence, IP/MAC/URL filtering, advanced firewall policies, and access control to protect your network and data. Load Balancing & Failover: Distribute traffic across multiple WAN connections for optimised bandwidth usage, and automatically failover to a backup WAN if the primary connection drops. Gigabit SFP WAN Port: Supports fibre WAN connections via SFP module — ideal for NBN FTTP, fibre business internet, or fibre uplinks in multi-building deployments. 512MB DRAM & 128MB NAND Flash: Generous memory for handling high VPN tunnel counts and complex routing policies without performance degradation. Rack Mountable: Standard rack-mount form factor for professional installation in comms cabinets and server rooms. Common Use Cases Multi-WAN load balancing and failover for business-critical internet connectivity Site-to-site IPsec VPN between multiple business locations or branches Secure remote access VPN for staff working from home or on the road Multi-site retail and hospitality networks managed centrally via Omada cloud Professional CCTV and IT installations requiring secure remote management NBN fibre business internet connections via the Gigabit SFP WAN port Technical Specifications Model TL-ER7206 WAN Ports 1× Gigabit SFP WAN + 1× Gigabit RJ45 WAN + 2× Gigabit WAN/LAN (configurable) LAN Ports 2× Fixed Gigabit RJ45 LAN + 2× Configurable WAN/LAN Total Gigabit Ports 6 (1× SFP + 5× RJ45) VPN — IPsec Up to 100× LAN-to-LAN tunnels VPN — OpenVPN Up to 50× simultaneous connections VPN — L2TP Up to 50× simultaneous connections VPN — PPTP Up to 50× simultaneous connections Load Balancing Yes (multi-WAN) WAN Failover Yes (automatic) Firewall Advanced policies, DoS defence, IP/MAC/URL filtering, ACL SDN Management Omada SDN (cloud & local controller) Zero-Touch Provisioning Yes (ZTP via Omada) DRAM 512MB Flash SPI 4MB + NAND 128MB Protocols TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DNS, IPsec, PPTP, L2TP Standards IEEE 802.3, 802.3u, 802.3ab Power Supply 100–240V AC, 50/60Hz (internal) Mounting Rack mountable Dimensions (W × D × H) 226 × 131 × 35mm Frequently Asked Questions What is multi-WAN load balancing and why does it matter? Multi-WAN load balancing distributes internet traffic across two or more WAN connections simultaneously — maximising total available bandwidth and preventing any single connection from becoming a bottleneck. For businesses with high internet usage or multiple users, this can significantly improve performance. Combined with automatic failover, if one WAN connection drops, traffic is automatically rerouted to the remaining connections with no manual intervention. What VPN protocols does the TL-ER7206 support? The TL-ER7206 supports IPsec (up to 100 LAN-to-LAN tunnels), OpenVPN (up to 50 connections), L2TP (up to 50 connections), and PPTP (up to 50 connections). IPsec is recommended for site-to-site VPN between business locations; OpenVPN is recommended for secure remote access by individual staff members. What is Omada SDN and do I need a controller? Omada SDN is TP-Link's centralised network management platform. The TL-ER7206 can be managed via the Omada cloud (no hardware controller required), a hardware Omada controller (OC300/OC200), or a software controller on a local server. Zero-Touch Provisioning (ZTP) allows the router to be pre-configured in the cloud and automatically download its configuration when connected on site — ideal for remote deployments. Can I use the SFP WAN port for an NBN fibre connection? Yes. The Gigabit SFP WAN port accepts a standard Gigabit SFP module (sold separately) for fibre WAN connections — compatible with NBN FTTP connections and fibre business internet services. Use a single-mode or multi-mode SFP module appropriate for your fibre infrastructure. How many devices can connect to the TL-ER7206? The TL-ER7206 is a router, not a switch — it manages routing and WAN connectivity. Connect it to a TP-Link Omada switch (such as the TL-SG2428P or TL-SG3428XMP) to provide wired ports for client devices, and to Omada access points for wireless coverage. The router itself handles the routing and VPN functions for the entire network. Is it suitable for a CCTV installation? Yes. The TL-ER7206 is an excellent choice as the gateway router in a professional CCTV installation — providing secure remote access to NVRs and cameras via VPN, multi-WAN failover for continuous connectivity, and Omada SDN integration for centralised management alongside VIGI cameras and VIGI NVRs.

Read more less

Power and Connect Your Devices with the TP-Link TL-SF1006PThe TP-Link TL-SF1006P is a compact 6-port Fast Ethernet desktop switch designed for small offices, home networks, and security installations. With four built-in PoE+ ports, it delivers both data and power over a single cable — eliminating the need for separate power adapters for IP cameras, VoIP phones, and wireless access points.Key Features 6× 10/100 Mbps RJ45 Ports — reliable Fast Ethernet connectivity for everyday networking 4× PoE+ Ports (802.3af/at) — power IP cameras, access points, and VoIP phones without extra cabling 67W Total PoE Budget — up to 30W per port to support demanding PoE+ devices Extend Mode — transmit data and power up to 250m on ports 1–4 for long-distance runs Priority Mode — ports 1–2 get traffic priority for latency-sensitive applications like VoIP and IP cameras Fanless Design — silent operation, ideal for office and home environments Plug and Play — no configuration required; simply connect and go Physical Security Lock — prevents accidental disconnection Typical Use Cases Powering IP security cameras in small CCTV installations Connecting VoIP phones in small offices without separate power supplies Extending network reach to wireless access points in hard-to-wire locations Home office networking with mixed PoE and non-PoE devices Technical Specifications Specification Detail Ports 6× 10/100 Mbps RJ45 (Ports 1–4 PoE+) PoE Standard IEEE 802.3af/at PoE Budget 67W total / 30W per port Switching Capacity 1.2 Gbps Packet Forwarding Rate 0.8928 Mpps MAC Address Table 2K Transmission Method Store-and-Forward Extend Mode Range Up to 250m (Ports 1–4) Fan Fanless Power Supply External adapter (53.5V DC / 1.31A) Max Power Consumption 1.9W (no PD) / 74W (full PoE load) Dimensions (W×D×H) 158 × 101 × 25 mm Operating Temperature 0–40°C Certifications FCC, CE, RoHS Warranty 5 Years What's in the Box TL-SF1006P Switch External Power Adapter Installation Guide Frequently Asked Questions Can I use non-PoE devices on this switch? Yes. All 6 ports support standard Ethernet. Ports 5–6 are non-PoE data-only ports. Non-PoE devices connected to ports 1–4 will receive data but no power. What is Extend Mode and when should I use it? Extend Mode allows data and power transmission up to 250m on ports 1–4 by reducing the link speed to 10 Mbps. It's ideal for IP cameras located far from the switch, such as in car parks or large properties. What is Priority Mode? Priority Mode gives ports 1–2 higher traffic priority, ensuring consistent performance for latency-sensitive devices like IP cameras or VoIP phones even when the network is busy. Does this switch require any software or configuration? No. The TL-SF1006P is fully plug-and-play with no software, login, or configuration required. Is this switch rack-mountable? No. The TL-SF1006P is a desktop form factor switch and is not designed for rack mounting.

Read more less

TP-Link TL-SF1016 16-Port 10/100Mbps Rackmount Switch MAC MDI/MDIX Steel Case16 10/100Mbps RJ45 portsInnovative energy-efficient technology saves power up to 75%Supports MAC address self-learning and auto MDI/MDIXStandard 19-inch rack-mountable steel caseWhat This Product DoesThe 16-Port 10/100Mbps Rackmount Switch TL-SF1016 provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network.All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play.Moreover, with the innovative energy-efficient technology, the TL-SF1016 can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.HARDWARE FEATURESStandards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3xInterface 16 10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIXNetwork Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)100BASE-TX: UTP category 5, 5e or above cable (maximum 100m)Fan Quantity FanlessPower Supply 100-240VAC, 50/60HzPower Consumption Maximum: 2.23W (220V/50Hz)Dimensions ( W x D x H ) 17.3*7.1*1.7 in. (440*180*44 mm)PERFORMANCESwitching Capacity 3.2GbpsPacket Forwarding Rate 2.38MppsMAC Address Table 8KBuffer Memory 2MbGreen Technology Innovative energy-efficient technology saves power up to 70%Transfer Method Store-and-ForwardOTHERSCertification FCC, CE, RoHSPackage Contents 16-Port 10/100Mbps Rackmount SwitchPower CordInstallation GuideRackmount KitRubber FeetEnvironment Operating Temperature: 0℃~40℃ (32℉~104℉);Storage Temperature: -40℃~70℃ (-40℉~158℉);Operating Humidity: 10%~90% non-condensing;Storage Humidity: 5%~90% non-condensing

Read more less

TP-Link MC100CM Media Converter – 100Mbps RJ45 to Multi-Mode SC Fibre | 2km Overview The TP-Link MC100CM is a compact and reliable media converter that bridges 100Mbps copper (RJ45) and multi-mode SC fibre networks over distances of up to 2km. Operating at 1310nm on both transmit and receive, it complies with IEEE 802.3u standards and supports both standalone desktop deployment and rack-mounted operation via TP-Link’s 19" chassis system. With Auto MDI/MDIX on the RJ45 port and Link Fault Passthrough for rapid fault detection, it is a straightforward, cost-effective solution for extending copper Ethernet over existing multi-mode fibre infrastructure in Australian commercial, industrial, and campus environments. Key Features 100Mbps RJ45 to Multi-Mode SC Fibre Conversion – Seamlessly converts between 10/100Base-TX copper Ethernet and 100Base-FX multi-mode fibre. Up to 2km Fibre Range – Extends your network over multi-mode fibre for building-to-building or campus links up to 2 kilometres. 1310nm Wavelength – Standard dual-fibre operation (Tx and Rx both at 1310nm); compatible with standard multi-mode SC patch leads and infrastructure. Standalone or Chassis-Mountable – Operates as a standalone desktop unit or slots into TP-Link’s 19" media converter chassis for rack-mounted, multi-port deployments. IEEE 802.3u Compliant – Meets 10/100Base-TX and 100Base-FX standards for reliable interoperability. Link Fault Passthrough & Far End Fault – Detects and passes through link failures promptly to minimise downtime. Auto MDI/MDIX on RJ45 Port – Eliminates the need for crossover cables on the copper side. Half/Full-Duplex Support – Full duplex flow control (IEEE 802.3x) and half duplex backpressure on the fibre port. LED Status Indicators – PWR, FDX/Col, Link/Act, and SPD LEDs for quick visual diagnostics. Use Cases Extending copper Ethernet over existing multi-mode fibre infrastructure between buildings or floors CCTV and IP camera backhaul over multi-mode fibre runs up to 2km Campus and industrial networks requiring interference-free fibre connectivity Rack-mounted multi-port fibre conversion deployments using TP-Link chassis Cost-effective fibre extension where multi-mode infrastructure is already installed Technical Specifications Specification Details Model MC100CM Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x RJ45 Port 1 × 100Mbps RJ45 (Auto MDI/MDIX) Fibre Port 1 × 100Mbps SC/UPC Multi-Mode Wavelength 1310nm (Tx & Rx) Fibre Type Multi-Mode (OM1/OM2) Max Fibre Distance Up to 2km Copper Cable Support Cat3/4/5 UTP or 100Ω STP (max 100m) Duplex (Fibre Port) Half / Full Duplex Flow Control IEEE 802.3x (Full) / Backpressure (Half) LED Indicators PWR, FDX/Col, Link/Act, SPD Dimensions 94.5 × 73.0 × 27.0mm Mounting Standalone Desktop or TP-Link 19" Chassis Power Supply External Power Adapter Frequently Asked Questions What is the difference between the MC100CM and the MC112CS? The MC100CM uses multi-mode fibre with a standard dual-fibre SC connection (Tx and Rx both at 1310nm) and supports distances up to 2km. The MC112CS uses single-mode fibre with WDM technology (single fibre strand) and supports distances up to 20km. Choose the MC100CM when you have existing multi-mode fibre infrastructure; choose the MC112CS for longer single-mode fibre runs. Can the MC100CM be rack-mounted? Yes. The MC100CM is chassis-mountable and slots into TP-Link’s 19" media converter chassis, allowing multiple converters to be installed in a rack for organised, multi-port fibre conversion deployments. It also operates as a standalone desktop unit without a chassis. What type of fibre cable does the MC100CM use? The MC100CM uses multi-mode fibre (OM1 or OM2) with an SC/UPC connector. It requires two fibre strands — one for transmit and one for receive — unlike WDM converters that use a single strand. Ensure your existing fibre infrastructure uses multi-mode cable before purchasing. Can I use the MC100CM for CCTV or IP camera backhaul? Yes. The MC100CM is well-suited for extending IP camera and CCTV network connections over existing multi-mode fibre runs, particularly between buildings or across large sites where copper Ethernet distances are insufficient. What is the maximum copper cable length on the RJ45 side? The RJ45 port supports standard Ethernet copper cable up to 100 metres using Cat3, Cat4, or Cat5 UTP, or 100Ω STP cabling. Does the MC100CM require a chassis to operate? No. The MC100CM operates as a fully standalone desktop unit with its own external power adapter. The chassis is optional and used only when rack-mounting multiple converters together. Installer Note: The MC100CM requires two fibre strands (one Tx, one Rx) at 1310nm. It is not a WDM single-fibre device. Confirm your fibre patch leads and infrastructure are multi-mode SC/UPC before installation. If you need single-fibre WDM operation or distances beyond 2km, consider the TP-Link MC112CS (single-mode, 20km) instead.

Read more less

Extend Your Fibre Network Up to 20km with the TP-Link MC110CS The TP-Link MC110CS is a compact, reliable single-mode media converter that bridges 100BASE-FX fibre and 100Base-TX copper networks at full wire speed. Whether you're connecting remote buildings, extending an existing fibre run, or integrating legacy copper infrastructure, the MC110CS delivers a seamless, standards-compliant solution — no chassis required. Description Designed to IEEE 802.3u standards, the MC110CS operates at 1310nm on both transmit and receive paths, supporting longwave (LX) laser specification. It accepts single-mode fibre via an SC-type connector and auto-negotiates duplex mode on the copper TX port. The unit can be deployed as a standalone device or installed into a TP-Link 19" system chassis for rack-mounted environments. Key Features Converts 100BASE-FX fibre to 100Base-TX copper (and vice versa) Single-mode fibre with SC-type connector Extends fibre distance up to 20 kilometres Operates at 1310nm wavelength (longwave LX) Full wire speed forwarding — no throughput bottleneck Auto MDI/MDI-X on TX port — no crossover cable needed Auto-negotiation of duplex mode on TX port Front panel status LEDs for quick diagnostics Standalone or 19" chassis-compatible deployment Compliant with IEEE 802.3u 10/100Base-TX and 100Base-FX standards Use Cases Campus and multi-building networks — connect buildings separated by up to 20km over single-mode fibre Industrial and commercial installations — integrate copper-based switches or NVRs into fibre backbone runs Security and surveillance systems — extend IP camera feeds over fibre where copper distance limits apply ISP and telco edge deployments — bridge fibre last-mile connections to copper customer premises equipment Rack-mounted environments — deploy in TP-Link chassis for centralised, managed media conversion Specifications Specification Detail Model MC110CS Standards IEEE 802.3u 10/100Base-TX, 100Base-FX Fibre Type Single-mode Connector Type SC Wavelength 1310nm (TX & RX) Laser Specification Longwave (LX) Max Fibre Distance Up to 20km TX Port Auto MDI/MDI-X, Auto-negotiation (duplex) Forwarding Rate Full wire speed Deployment Standalone or 19" TP-Link chassis Indicators Front panel status LEDs SKU / Barcode MC110CS / 6935364030407 Vendor TP-Link Weight 0.34g Frequently Asked Questions What type of fibre cable does the MC110CS use? The MC110CS uses single-mode fibre with an SC-type connector. It is not compatible with multi-mode fibre. Does the MC110CS require a chassis to operate? No. It can be used as a standalone device. It is also compatible with TP-Link's 19" system chassis for rack-mounted deployments. What is the maximum fibre distance supported? The MC110CS supports single-mode fibre runs of up to 20 kilometres. Does it support auto-negotiation? Yes. The TX (copper) port supports auto-negotiation of duplex mode and Auto MDI/MDI-X, so no crossover cable is required. What wavelength does the MC110CS operate at? It operates at 1310nm on both transmit and receive, using a longwave (LX) laser specification. Is this product suitable for CCTV and IP camera installations? Yes. The MC110CS is well-suited for extending IP camera feeds over single-mode fibre where copper distance limits are exceeded. Does CCTV Guru ship this product Australia-wide? Yes. The MC110CS is stocked locally and ships Australia-wide.

Read more less