Ubiquiti — NDAA Compliant
Ubiquiti Ethernet Surge Protector — Gigabit PoE/Non-PoE ESD Protection (ETH-SP-G2)
The Ubiquiti ETH-SP-G2 Ethernet Surge Protector shields any outdoor PoE or non-PoE networking device from ESD and surge events, with two passive surge-protected RJ45 connections supporting Gigabit Ethernet speeds up to 1 Gbps. Quick to install inline on any outdoor Ethernet run, it absorbs transient current with a 10kA+ discharge rating and an IPX5 weatherproof housing rated from −30°C to 65°C — built for tough Australian outdoor conditions. Genuine Ubiquiti stock with fast Australia-wide shipping.
Outdoor ESD Protection
Protects outdoor Ethernet devices by absorbing transient current and diverting surge energy before it reaches your equipment.
Two Passive RJ45 Connections
Inline female-to-female RJ45 design — no power or configuration required. Compatible with both PoE and non-PoE devices.
Gigabit Ready
Supports GbE data-line protection with connection speeds up to 1 Gbps for high-speed outdoor networks.
Weatherproof & Rugged
IPX5-rated housing and a −30°C to 65°C operating range, with ETSI300-019-1.4 shock and vibration certification.
Technical Specifications
| Model |
ETH-SP-G2 |
| Dimensions |
91 × 61 × 32.5 mm |
| Weight |
80 g |
| Weatherproofing |
IPX5 |
| Networking Interface |
(2) RJ45 female connectors |
| ESD/EMP Protection |
Absorbs transient current, surge voltage response 100V/s to 1kV/µs |
| DC Spark-Over Voltage |
90V @ 100V/s |
| Max. Impulse Spark-Over Voltage |
700V @ 1kV/µs |
| Discharge Current |
10kA+ |
| Max. Insulation Resistance |
1G ohm @ 50V |
| Max. Capacitance |
1.0 pF @ 1 MHz |
| Data Line Protection |
GbE |
| PoE Support |
Yes |
| Shock & Vibration |
ETSI300-019-1.4 Standard |
| Operating Temperature |
−30 to 65°C |
| Operating Humidity |
10 to 90% non-condensing |
| Compliance |
NDAA compliant |
Downloads & Resources
