Description
Add PoE+ Power to Any Gigabit Network Port — No PoE Switch Required
The TP-Link TL-POE160S is a single-port Gigabit PoE+ injector that adds Power over Ethernet capability to any standard network switch or router port. Simply connect it between your existing switch and a PoE-powered device — such as an IP camera, wireless access point, or VoIP phone — and it delivers up to 30W of power alongside data over a single Ethernet cable. No configuration required.
Key Features
-
IEEE 802.3af/at Compliant — compatible with all standard PoE and PoE+ powered devices
-
2× Gigabit Ports — 1× data-in (from switch/router) and 1× data+power-out (to PoE device), both at 10/100/1000Mbps
-
Up to 30W Output — auto-senses and supplies only the power the connected device requires
-
Integrated Power Supply — built-in AC socket (100–240V), no external power brick needed
-
Plug and Play — zero configuration; connect and go
-
Wall-Mountable or Desktop — flexible installation for any environment
-
LED Power Indicator — confirms active PoE power delivery at a glance
Typical Use Cases
- Adding PoE power to a single IP camera without replacing an existing non-PoE switch
- Powering a wireless access point in a location without a nearby power outlet
- Supplying power to a VoIP phone or intercom from a standard Ethernet port
- Temporary or single-device PoE deployments where a full PoE switch is not required
- Retrofitting PoE capability to legacy network infrastructure
Technical Specifications
| Specification |
Detail |
| Model |
TL-POE160S |
| PoE Standard |
IEEE 802.3af / 802.3at (PoE+) |
| Ports |
1× Gigabit RJ45 Data-In, 1× Gigabit RJ45 Data+Power-Out |
| Port Speed |
10/100/1000 Mbps (auto-negotiation) |
| Max PoE Output |
30W (auto-sensing) |
| Power Input |
100–240V AC, 50/60Hz (integrated) |
| Network Standards |
IEEE 802.3i, 802.3u, 802.3ab, 802.3af, 802.3at |
| Max Cable Length |
Up to 100m (Cat5e/Cat6) |
| Installation |
Wall-mount or desktop |
| Dimensions (W×D×H) |
125 × 59.4 × 36.8 mm |
| Operating Temperature |
0–40°C |
| Certifications |
FCC, CE, RoHS |
| Warranty |
3 Years |
What's in the Box
- TL-POE160S PoE+ Injector
- Installation Guide
Frequently Asked Questions
- What is a PoE injector and how does it work?
- A PoE injector sits between your existing network switch and a PoE-powered device. It takes standard Ethernet data from your switch and adds DC power to the cable, so the connected device receives both data and power through a single RJ45 cable — no separate power adapter needed at the device end.
- Do I need to replace my switch to use this injector?
- No. The TL-POE160S works with any standard Ethernet switch or router, regardless of whether it supports PoE. It adds PoE capability to a single port without any changes to your existing infrastructure.
- What devices can I power with the TL-POE160S?
- Any IEEE 802.3af or 802.3at compliant device drawing up to 30W — including IP cameras, wireless access points, VoIP phones, intercoms, and access control readers.
- Does it work with non-PoE devices?
- The TL-POE160S will only supply power to devices that actively request it via the 802.3af/at handshake. Non-PoE devices connected to the output port will receive data only and will not be damaged.
- Can I use this outdoors?
- The injector itself is rated for indoor use (0–40°C). However, it can power outdoor PoE devices such as weatherproof IP cameras via a cable run from an indoor installation point.
