UniFi System

Show previous products

• Save -$61.00

  Ubiquiti UniFi Protect G6 Pro 360 – 12MP 360° Fisheye PoE+ AI Camera (UVC-G6-Pro-360)

   

  UniFi Protect — NDAA Compliant UniFi 12MP 360° Fisheye UniFi Protect G6 Pro 360 — 12MP 360° Fisheye PoE+ AI Camera (UVC-G6-Pro-360) The Ubiquiti UniFi Protect G6 Pro 360 (UVC-G6-Pro-360) watches an entire room or forecourt from a single point. A 12MP fisheye sensor captures a full 360° panoramic view with digital pan-tilt-zoom, so you can scrub back and zoom into any corner after the fact. On-device AI flags people, vehicles, and animals, Smart IR lights the scene in four controllable zones, and two-way audio lets you listen and talk back. Built tough with an IP66, IK10 vandal-resistant body rated to −30°C, it's ideal for ceilings in retail, offices, lobbies, and car parks across Australia. Available in White (UVC-G6-Pro-360) and Black (UVC-G6-Pro-360-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 12 MP Field of View 360° Fisheye Night Vision Smart IR 15 m Protection IP66 / IK10 Why Choose the G6 Pro 360? Full 360° CoverageA single 12MP fisheye sensor sees an entire space — 180° in every direction — replacing several fixed cameras and eliminating blind spots. Digital Pan-Tilt-ZoomZoom and pan into any part of the scene live or on playback with digital PTZ — the full 360° is always recorded, so you never miss a detail. On-Device AI DetectionSmart detection identifies people, vehicles, and animals in real time, cutting nuisance alerts so you only get notified about what matters. Smart IR Night VisionBuilt-in IR reaches up to 15 m with 4 controllable zones, lighting only the areas you need and avoiding over-exposed hotspots. Vandal-Resistant, All-WeatherAn aluminium-alloy body sealed to IP66 with strong IK10 impact resistance and a −30 to 50°C range — built for exposed indoor and outdoor ceilings. Single-Cable PoE+ & UniFi ProtectOne PoE+ cable powers and connects the camera, with a microSD slot and full management through UniFi Protect — no subscription required. NDAA CompliantFully NDAA Section 889 compliant for government, defence, and security-sensitive installations. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Technical Specifications Model UVC-G6-Pro-360 (White: UVC-G6-Pro-360 / Black: UVC-G6-Pro-360-B) Resolution 12 MP, 3504 × 3504 (1:1) @ 24 FPS Image Sensor 1/1.6″ 12 MP CMOS, HDR Lens Fisheye (360° panoramic) Field of View H: 180° • V: 180° • D: 180° (full 360° coverage with digital PTZ) Night Vision Smart IR with 4 controllable zones, up to 15 m AI / Smart Detection People, vehicles, animals Audio Two-way audio Weatherproof Rating IP66 Impact / Tamper Resistance IK10 (vandal-resistant) Network Interface 10/100 MbE RJ45 Power Method PoE+ (37–57 V DC) • max 13.5 W Processor Quad-core Arm® Cortex®-A53 Storage MicroSD card slot (local recording) Mounting Surface mount (included); AI 360 junction box, dual mount, arm mount (optional) Enclosure Aluminium alloy & polycarbonate Dimensions / Weight ⌀147 × 65.5 mm • 610 g Operating Temperature −30 to 50°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-G6-Pro-360) / Black (UVC-G6-Pro-360-B) Downloads & Resources UVC-G6-Pro-360 Datasheet Ubiquiti G6 Pro 360 Quick Start Guide What's in the Box UniFi Protect G6 Pro 360 CameraYour choice of White (UVC-G6-Pro-360) or Black (UVC-G6-Pro-360-B) finish. Surface MountSurface mount, screws and anchors included. DocumentationQuick-start guide and installation instructions. Not IncludedA PoE+ switch/injector, network cable and microSD card are sold separately. Best For Retail Floors One ceiling camera covers an entire shop floor with digital zoom into any aisle. Offices & Lobbies Full-room overview of open-plan offices, receptions, and waiting areas. Car Parks & Forecourts Mount high for a 360° sweep of vehicle and pedestrian movement. Warehouses Vandal-resistant coverage of large open spaces from a single mounting point. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by a PoE+ (802.3at) switch or injector — standard 802.3af is not sufficient (max draw 13.5 W). Surface mount is included; the AI 360 junction box, dual mount and arm mount are optional. Mount centrally on a ceiling for the best 360° coverage; add a microSD card for on-camera recording. Frequently Asked Questions What area does the G6 Pro 360 cover?Its 12MP fisheye lens captures a full 360° panoramic view from a single ceiling mount, with digital pan-tilt-zoom to focus on any part of the scene. Does it do face or number-plate recognition?No. The G6 Pro 360 provides people, vehicle, and animal smart detection. For face or number-plate recognition, choose a camera like the G6 Pro Turret or AI Pro. Does it require a UniFi Protect subscription?No. UniFi Protect runs locally on a UniFi NVR or Dream Machine with no monthly fees. A microSD card can also be used for on-camera recording. What power does it need?PoE+ (802.3at), up to 13.5 W. A standard 802.3af PoE port will not power it reliably. Is it suitable for outdoor use in Australia?Yes. IP66 weatherproofing, IK10 vandal resistance, and a −30 to 50°C range suit Australian indoor and outdoor environments. What's the difference between White and Black?Identical specs and performance — only the colour differs. White (UVC-G6-Pro-360) suits light ceilings; Black (UVC-G6-Pro-360-B) suits dark or discreet installs. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,010.00 $949.00

• Save -$7.00

  Ubiquiti Ubiquiti UniFi Cloud Gateway Ultra – Compact Multi-WAN Security Gateway (UCG-Ultra)

   

  UniFi — NDAA Compliant UniFi Cloud Gateway Ultra — Compact Multi-WAN Security Gateway (UCG-Ultra) The Ubiquiti UniFi Cloud Gateway Ultra (UCG-Ultra) is a powerful, palm-sized UniFi OS console that runs the full UniFi Network application with built-in enterprise security — all without a subscription. It routes up to 1 Gbps of IDS/IPS, supports multi-WAN load balancing and failover, and manages 30+ UniFi devices and 300+ clients from a single pane of glass. Powered over USB-C and silent by design, the UCG-Ultra is ideal for homes, home offices, and small businesses anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. WAN Port 2.5 GbE IDS / IPS 1 Gbps Manages 30+ Devices Power USB-C, 6.2 W Why Choose the UniFi Cloud Gateway Ultra? Runs UniFi Network — No Subscription A complete UniFi OS console that hosts the UniFi Network application locally. Manage routing, switching, and WiFi for your whole site with no monthly fees and full local control. 1 Gbps IDS/IPS Security Enterprise-grade intrusion detection & prevention at up to 1 Gbps, with 55,000+ threat signatures via CyberSecure, a stateful and Layer 7 application-aware firewall, DPI, content filtering, and ad blocking. Multi-WAN Load Balancing & Failover A native 2.5 GbE WAN plus support for up to 4 WAN ports lets you load-balance or fail over across connections — with optional UniFi LTE backup for always-on internet. License-Free SD-WAN & VPN Build secure site-to-site links with Site Magic SD-WAN and IPsec, plus a full VPN server & client suite — WireGuard, OpenVPN, L2TP, Teleport and one-click Identity VPN. Advanced Networking OSPF dynamic routing, advanced QoS, VLAN traffic segmentation, advanced NAT, an integrated RADIUS server with RadSec, policy-based routing, and full IPv6 ISP support. Silent, Compact & Simple A fanless polycarbonate desktop unit (141.8 × 127.6 × 30 mm) powered by USB-C at just 6.2 W, with a 0.96″ status display and quick mobile-app setup via Bluetooth. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive networks where supply-chain integrity matters. Technical Specifications Model UCG-Ultra (UniFi Cloud Gateway Ultra) UniFi Application UniFi Network (runs locally on UniFi OS) Managed UniFi Devices 30+ Simultaneous Clients 300+ Ports 1 × 2.5 GbE RJ45 (default WAN) • 4 × 1 GbE RJ45 Max WAN Ports 4 (multi-WAN load balancing & failover) IDS/IPS Throughput 1 Gbps Security Stateful + Layer 7 firewall, DPI, zone-based filtering, content filtering, ad blocking, IPS/IDS (55,000+ signatures with CyberSecure) VPN & SD-WAN License-free SD-WAN, Site Magic, IPsec, WireGuard, OpenVPN, L2TP, Teleport, Identity One-Click VPN Routing OSPF, advanced QoS, advanced NAT, RADIUS (RadSec), policy-based routing, IPv6, IGMP proxy Processor Quad-core Arm® Cortex®-A53 @ 1.5 GHz Memory / Storage 3 GB RAM • 16 GB on-board Display 0.96″ status LCM Power USB-C (5 V DC / 3 A), 100–240 V AC adapter included • max 6.2 W Dimensions / Weight 141.8 × 127.6 × 30 mm • 520 g Enclosure Polycarbonate, fanless desktop Operating Temperature −10 to 40°C, 5–95% non-condensing Certifications CE, FCC, IC, Anatel, SRRC Compliance NDAA compliant Downloads & Resources UCG-Ultra Datasheet Ubiquiti Gateway Quick Start Guide What's in the Box UniFi Cloud Gateway Ultra UCG-Ultra console. USB-C Power Adapter 5 V DC / 3 A power supply (100–240 V AC). Ethernet Cable Patch cable for initial setup. Quick Start Guide Setup and mounting instructions. Best For Homes & Home Offices A silent, single-box UniFi network core with enterprise security and no monthly fees. Small Business Multi-WAN failover, VLAN segmentation and VPN for reliable, secure connectivity. UniFi Upgrades Adopt existing UniFi switches and access points into one easy UniFi OS console. Remote Access WireGuard, Teleport and one-click VPN for secure work-from-anywhere access. Runs the UniFi Network application — pair with UniFi switches and access points for a full UniFi stack. Native 2.5 GbE WAN; use the 1 GbE ports for LAN or as additional WAN (up to 4 WAN total). Powered by the included USB-C adapter — no separate PoE or power injector required. This gateway does not output PoE; power UniFi APs/cameras from a PoE switch or injector. Frequently Asked Questions Does the UCG-Ultra require a subscription? No. It runs the UniFi Network application locally on UniFi OS with no monthly fees. CyberSecure (optional) adds the 55,000+ IDS/IPS signature set. How many devices and clients can it manage? It manages 30+ UniFi devices and 300+ simultaneous clients — ideal for homes, home offices, and small businesses. Does it support multiple internet connections? Yes. It has a native 2.5 GbE WAN and supports up to 4 WAN ports for load balancing and failover, plus optional UniFi LTE backup. Does it output PoE? No. The UCG-Ultra is powered by USB-C and does not provide PoE. Power your UniFi access points and cameras from a PoE switch or injector. What VPN options are supported? WireGuard, OpenVPN, L2TP and IPsec, plus Teleport zero-config VPN, Site Magic SD-WAN, and one-click Identity VPN. Is the UCG-Ultra NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UCG-Ultra is NDAA Section 889 compliant. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $246.00 $239.00

• 

  Ubiquiti Ubiquiti UniFi Switch Enterprise XG 24 — 24-Port 10GbE Managed Layer 3 Switch (USW-EnterpriseXG-24)

   

  UniFi — NDAA Compliant UniFi Switch Enterprise XG 24 — 24-Port 10GbE Managed Layer 3 Switch (USW-EnterpriseXG-24) The UniFi Switch Enterprise XG 24 (USW-EnterpriseXG-24) is a fully managed, multi-gigabit Layer 3 switch built for high-throughput networks. It packs 24 × 10GbE RJ45 ports plus 2 × 25G SFP28 uplinks, a built-in 1.3″ LCM colour touchscreen with AR switch management, and optional redundant-power support. Whether you're wiring a data closet, AV studio, server room, or high-density office anywhere in Australia, it delivers enterprise performance under the intuitive UniFi Network app — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 24 × 10GbE RJ45 Uplinks 2 × 25G SFP28 Display 1.3″ Touchscreen Switching Managed Layer 3 Why Choose the UniFi Switch Enterprise XG 24? 24 × 10GbE RJ45 Ports Deliver 10 Gigabit connectivity over standard copper to servers, NAS units, workstations, and high-throughput access layers — no fibre runs required to reach 10G speeds. 2 × 25G SFP28 Uplinks High-bandwidth 25 Gigabit SFP28 uplinks aggregate traffic to your core or aggregation layer, keeping the network fast and congestion-free as it scales. Managed Layer 3 Switching Full Layer 3 routing and switching features let the Enterprise XG 24 route between VLANs and segments on its own, reducing load on upstream gateways. 1.3″ LCM Colour Touchscreen An onboard 1.3″ colour touchscreen with AR switch management surfaces key system and connection insights at a glance — right at the rack. Redundant Power Ready A dedicated USP RPS DC input adds power-supply failure protection when paired with the UniFi SmartPower Redundant Power System (sold separately) for mission-critical uptime. Tidy Single-Row Cabling A single-row RJ45 port layout lines up cleanly with patch panels, making cable management and servicing in dense racks far simpler. UniFi Network Management Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app — one pane of glass for your entire UniFi stack. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is mandatory. Technical Specifications Model USW-EnterpriseXG-24 (UniFi Switch Enterprise XG 24) Switching Layer Managed Layer 3 RJ45 Ports (24) 10GbE RJ45 SFP Ports (2) 25G SFP28 (uplinks) Display (1) 1.3″ LCM colour touchscreen with AR switch management Redundant Power (1) USP RPS DC input (USP RPS sold separately) Port Layout Single-row RJ45 for easy patch-panel cable management Management UniFi Network web application & mobile app Compliance NDAA compliant Downloads & Resources USW-EnterpriseXG-24 Datasheet Installation Guide What's in the Box UniFi Switch Enterprise XG 24 The USW-EnterpriseXG-24 managed Layer 3 switch. Mounting Hardware Rack-mount kit and screws for standard 19″ racks. Power Cable AC power cord for connection to mains. Not Included SFP28 transceivers, DAC cables, and the USP RPS redundant power system are sold separately. Best For Server Rooms & Data Closets 10GbE copper to every server and NAS with 25G uplinks back to the core for high throughput. AV & Production Studios High-bandwidth, low-latency switching for media editing, NDI, and large file transfers. High-Density Offices Layer 3 routing between VLANs keeps a busy corporate network fast and segmented. Aggregation Layer Acts as a powerful distribution switch feeding access-layer UniFi switches over 25G. Adopt and manage with the UniFi Network application running on a UniFi gateway, Cloud Key, or self-hosted host. Mounts in a standard 19″ rack; align the single-row RJ45 ports with your patch panel for clean cabling. Add a USP RPS via the DC input for power-supply redundancy on critical deployments. Populate the 25G SFP28 ports with Ubiquiti SFP28 transceivers or DAC cables for uplinks (sold separately). Frequently Asked Questions Is the Enterprise XG 24 a Layer 3 switch? Yes. The USW-EnterpriseXG-24 is a fully managed Layer 3 switch, so it can route between VLANs and network segments without relying solely on an upstream gateway. Do the 10GbE ports work over standard copper cabling? Yes. All 24 RJ45 ports deliver 10GbE over copper, so you can reach 10 Gigabit speeds without running fibre to each device. What are the 25G SFP28 ports for? The two 25G SFP28 ports are designed as uplinks to aggregate traffic back to your core or aggregation layer. Transceivers and DAC cables are sold separately. Can I add redundant power? Yes. The switch has a USP RPS DC input for enhanced power-supply failure protection when connected to the UniFi SmartPower Redundant Power System (sold separately). How is it managed? Through the UniFi Network web application and mobile app, plus the onboard 1.3″ colour touchscreen with AR switch management for at-the-rack insights. Is the Enterprise XG 24 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $2,372.70

• Save -$30.40

  Ubiquiti Ubiquiti UniFi Switch Enterprise 8 PoE — 8x 2.5GbE PoE+ Layer 3 Managed Switch (USW-Enterprise-8-PoE)

   

  UniFi Switching — NDAA Compliant UniFi Switch Enterprise 8 PoE — 8x 2.5GbE PoE+ Layer 3 Managed Switch (USW-Enterprise-8-PoE) The UniFi Switch Enterprise 8 PoE is a fully managed Layer 3 switch built for high-bandwidth networks — pairing eight 2.5GbE 802.3at PoE+ RJ45 ports with two 10G SFP+ uplinks to power and connect Wi-Fi 6 access points, cameras, and workstations without bottlenecks. A 1.3″ LCM colour touchscreen with AR switch management makes setup and monitoring effortless, while the powerful UniFi Network application gives you full control from anywhere. Wall-mountable with the included kit and backed by genuine Ubiquiti stock with fast Australia-wide shipping, it's the ideal compact backbone for homes, offices, and commercial sites across Australia. PoE+ Ports 8x 2.5GbE PoE Budget 120 W Total Uplinks 2x 10G SFP+ Management Layer 3 Touchscreen Why Choose the UniFi Switch Enterprise 8 PoE? 8x 2.5GbE PoE+ Ports Eight 2.5GbE 802.3at PoE+ RJ45 ports deliver power and multi-gig data over a single cable — ideal for next-generation Wi-Fi 6 access points, cameras, and high-throughput devices that exceed standard gigabit. Dual 10G SFP+ Uplinks Two 10G SFP+ ports provide fast, non-blocking uplinks to your core network or other switches, keeping aggregated traffic flowing smoothly across busy sites. 120 W Total PoE Supply A 120 W PoE budget powers your connected access points, cameras, and IoT devices directly from the switch — no separate injectors or power runs required. 1.3″ LCM Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management displays key system and connection insights at a glance and simplifies setup right at the rack. Fully Managed Layer 3 A fully managed Layer 3 switch configured through the intuitive UniFi Network web application and mobile app — monitor, segment, and route traffic from anywhere. Wall-Mountable Design Ships with a wall-mount kit for flexible, space-saving deployment in offices, comms cupboards, and tight installs where a full rack isn't practical. UniFi Network Integration Managed alongside the rest of your UniFi gear through a single pane of glass — requires the UniFi Network application version 6.3.51 or later. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Enterprise-8-PoE (Switch Enterprise 8 PoE) Switching Layer Fully managed, Layer 3 PoE RJ45 Ports (8) 2.5GbE, 802.3at PoE+ SFP+ Ports (2) 10G SFP+ (uplinks) Total PoE Supply 120 W Display 1.3″ LCM colour touchscreen with AR switch management Mounting Wall-mountable (kit included) Management UniFi Network web application & mobile app Software Requirement UniFi Network application version 6.3.51 and later Compliance NDAA compliant Downloads & Resources USW-Enterprise-8-PoE Datasheet Installation Guide What's in the Box UniFi Switch Enterprise 8 PoE The USW-Enterprise-8-PoE Layer 3 managed switch. Wall-Mount Kit Mounting hardware for flexible wall installation. Documentation Quick-start guide and installation instructions. Not Included SFP+ transceivers, fibre/network cabling, and a UniFi host controller are sold separately. Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports feed next-gen Wi-Fi 6 access points without throttling their throughput. Offices & Comms Cupboards Wall-mountable footprint and touchscreen setup suit space-constrained installs. Camera & IoT Backbones 120 W PoE budget powers cameras and IoT devices directly from one managed switch. High-Bandwidth Networks Dual 10G SFP+ uplinks aggregate traffic for busy, multi-device commercial sites. Managed with the UniFi Network application version 6.3.51 or later via web or mobile app. Eight 2.5GbE 802.3at PoE+ ports share a 120 W total PoE budget across connected devices. Use the two 10G SFP+ ports for high-speed uplinks to your core network or other switches. Mounts to a wall out of the box using the included mounting kit. Frequently Asked Questions How many devices can the Enterprise 8 PoE power? It has eight 2.5GbE 802.3at PoE+ ports sharing a 120 W total PoE budget — enough to power multiple Wi-Fi 6 access points, cameras, or IoT devices depending on each device's draw. What are the 10G SFP+ ports for? The two 10G SFP+ ports are high-speed uplinks used to connect the switch to your core network or to other switches. SFP+ transceivers are sold separately. Do I need a controller to manage it? Yes. The switch is managed through the UniFi Network application (version 6.3.51 or later) via the web interface or mobile app, hosted on a UniFi console such as a Cloud Key, Dream Machine, or self-hosted controller. Can it be wall-mounted? Yes. The switch is wall-mountable and ships with the required mounting kit, making it ideal for offices and comms cupboards. Is the Enterprise 8 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $939.00 $908.60

• 

  Ubiquiti Ubiquiti UniFi Instant 802.3af Gigabit PoE Adapter - INS-3AF-I-G

   

  UniFi — NDAA Compliant Ubiquiti UniFi Instant 802.3af Gigabit PoE Adapter (INS-3AF-I-G) The Ubiquiti UniFi Instant 802.3af Adapter (INS-3AF-I-G) is a compact indoor Gigabit converter that transforms passive PoE devices into 802.3af-compliant products, letting you power them from any standard 802.3af PoE switch or injector. With a Gigabit (10/100/1000) pass-through, it's the simple way to add a legacy or passive-PoE device to a modern UniFi network without a separate power supply. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Passive to 802.3af Converts passive PoE input into a standards-based 802.3af output, so 802.3af switches and injectors can power your device safely. Gigabit Pass-Through Full 10/100/1000 Mbps data throughput keeps high-bandwidth devices running at full speed. Indoor & Compact A small, inline indoor form factor that tucks neatly behind equipment or inside a comms cabinet. NDAA Compliant Manufactured by Ubiquiti and NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model INS-3AF-I-G Type Instant 802.3af PoE converter (passive PoE to 802.3af) Data Rate Gigabit Ethernet — 10/100/1000 Mbps PoE Standard (Output) IEEE 802.3af Placement Indoor Compliance NDAA compliant Downloads & Resources INS-3AF-I-G Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $41.80

• 

  Ubiquiti Ubiquiti UniFi Pro Max 48 (USW-Pro-Max-48) — 48-Port Layer 3 Etherlighting Switch

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Pro Max 48 — 48-Port Layer 3 Etherlighting Switch (USW-Pro-Max-48) The Ubiquiti UniFi Pro Max 48 (USW-Pro-Max-48) is a 48-port, Layer 3 Etherlighting™ managed switch built for high-performance UniFi networks. It combines 16 multi-gigabit 2.5 GbE ports, 32 GbE RJ45 ports, and 4 x 10G SFP+ uplinks with 112 Gbps of non-blocking throughput and full inter-VLAN routing. Whether you're powering a busy office, retail site, warehouse, or commercial install anywhere in Australia, the Pro Max 48 delivers enterprise-grade switching with simple UniFi Network management, a built-in 1.3″ touchscreen, and DC power-backup readiness. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48 + 4 SFP+ Throughput 112 Gbps Routing Layer 3 Form Factor 1U Rack Why Choose the UniFi Pro Max 48? Multi-Gigabit 2.5 GbE Ports Sixteen 2.5 GbE RJ45 ports give WiFi 7 access points, NAS devices, and high-speed clients the headroom they need, while 32 standard GbE ports cover the rest of your network. 112 Gbps Non-Blocking Throughput With 224 Gbps switching capacity, 112 Gbps non-blocking throughput, and a 167 Mpps forwarding rate, the Pro Max 48 handles demanding, high-density networks without bottlenecks. Layer 3 Routing Built In On-switch inter-VLAN routing, static routing, DHCP server, and DHCP relay keep traffic local and fast, reducing load on your gateway across multiple networks. 4 x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth fibre or DAC uplinks to your core, aggregation layer, or other UniFi switches for a future-proof backbone. Etherlighting™ & Touchscreen Etherlighting™ ports illuminate to show location, speed/link, and native VLAN, while a 1.3″ touchscreen displays live status at a glance — pair with UniFi Etherlighting Patch Cables for optimal brightness. DC Power Backup Ready A dedicated USP RPS DC input lets you add redundant power for critical infrastructure, keeping the switch online through mains interruptions. Pro AV & Advanced L2 Built-in Pro AV profiles (Dante, Q-SYS, NDI, SDVoE, AES67, Crestron), LACP aggregation, QoS, 802.1X, jumbo frames, and advanced IGMP make it ideal for AV-over-IP and enterprise deployments. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model USW-Pro-Max-48 Networking Interface (32) GbE RJ45 • (16) 1/2.5 GbE RJ45 • (4) 10G SFP+ Switching Capacity 224 Gbps Total Non-Blocking Throughput 112 Gbps Forwarding Rate 167 Mpps Management Layer 3 • Ethernet Supported VLANs 1,000 MAC Address Table 32,000 L3 Table Size 12,000 ARP entries • 12,000 IPv4 routes • 256 static routes Packet Buffer 2 MB Redundancy DC power backup (USP RPS DC input) Form Factor Rack mount (1U) Display 1.3″ touchscreen (LCM) Power Method (1) Universal input, 100–240V AC, 50/60 Hz • (1) USP RPS DC input Power Supply AC/DC, internal, 100W Max. Power Consumption 100W Heat Dissipation 341.2 BTU/hr Enclosure / Mount Material SGCC steel Supported Rack Depth 400–1200 mm (15.7–47.2″) Dimensions 442 × 325 × 44 mm (17.4 × 12.8 × 1.7″) Weight 4.8 kg (4.9 kg with brackets) Operating Temperature −5 to 40°C, 10–90% non-condensing Etherlighting™ Ethernet & SFP+ (locating, speed/link, native VLAN) Application Requirements UniFi Network 8.0.24 and later Certifications CE, FCC, IC, Anatel: 06373-24-08356 Compliance NDAA compliant Downloads & Resources USW-Pro-Max-48 Datasheet Installation Guide Best For Offices & Enterprise High port density with multi-gig 2.5 GbE for WiFi 7 APs and fast desktops across busy floors. Warehouses & Sites Layer 3 routing keeps traffic local and 10G SFP+ uplinks tie distributed switches together. Pro AV Installs Built-in Pro AV profiles for Dante, NDI, Q-SYS and SDVoE make AV-over-IP simple and reliable. Data & Rack Rooms 1U rack form factor with DC backup readiness and a touchscreen for critical infrastructure. Managed with UniFi Network 8.0.24 or later via a UniFi gateway, Cloud Key, or self-hosted controller. Mounts in a standard 1U rack; supports rack depths from 400–1200 mm. Powered by universal 100–240V AC; add a USP RPS DC input for redundant power. Pair with UniFi Etherlighting Patch Cables for optimal port-illumination brightness. Frequently Asked Questions Is the USW-Pro-Max-48 a PoE switch? No. The Pro Max 48 is a non-PoE Layer 3 switch. If you need to power PoE devices, use UniFi PoE switches or PoE injectors alongside it. Does it support Layer 3 routing? Yes. It offers inter-VLAN routing, static routing, a local DHCP server, and DHCP relay across networks managed on the switch. How many multi-gigabit ports does it have? It includes 16 x 2.5 GbE RJ45 ports, 32 x GbE RJ45 ports, and 4 x 10G SFP+ uplink ports. What controller version do I need? UniFi Network version 8.0.24 or later is required to manage the Pro Max 48. Can I add power redundancy? Yes. The switch is DC power backup ready via a USP RPS DC input for resilient, always-on infrastructure. Is the Pro Max 48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-Max-48 is NDAA Section 889 compliant. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,189.00

• 

  Ubiquiti Ubiquiti U-PRO-MP — Versatile Mounting System for UniFi Access Points

   

  Genuine Ubiquiti · Mounting System · Stainless SteelUbiquiti U-PRO-MPOne Versatile Mount for Your UniFi Access Points The Ubiquiti U-PRO-MP is a professional mounting system for UniFi Access Points, built from durable stainless steel. With a variety of mounting holes and a printed legend identifying which holes suit each AP, it makes installing a wide range of UniFi access points fast and foolproof. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Broad AP Compatibility — works with U6 Enterprise, U6 Pro, U6 Long-Range, AC Pro, AC HD, AC SHD and AC XG. Versatile Hole Pattern — a variety of mounting holes covers many different installation scenarios. Printed Legend — markings on the plate identify the correct holes for each access point. Durable Build — stainless steel enclosure for long-lasting strength and corrosion resistance. Specifications Model U-PRO-MP Category Mounting System Material Stainless steel Dimensions 175.6 mm (6.9") Weight 139 g (4.9 oz) Compatible With U6 Enterprise, U6 Pro, U6 Long-Range, AC Pro, AC HD, AC SHD, AC XG Warranty 3 Years (AU) Frequently Asked Questions Which access points does it support?It is compatible with U6 Enterprise, U6 Pro, U6 Long-Range, AC Professional, AC HD, AC SHD and AC XG. How do I know which holes to use?A legend printed on the mounting plate identifies the holes used for each access point. What is it made from?It features a durable stainless steel enclosure. What are its dimensions?It measures 175.6 mm (6.9") and weighs 139 g (4.9 oz).

  Read more less

   

  $18.11

• Save -$9.00

  Ubiquiti Ubiquiti UniFi Doorbell Lite PoE Video Doorbell (UVC-Doorbell-Lite) – White or Black

   

  UniFi Protect — NDAA Compliant UVC-Doorbell-Lite PoE Video Doorbell — Australian Stock & Fast AU Shipping The Ubiquiti UniFi Doorbell Lite is a compact PoE video doorbell built for the UniFi Protect ecosystem — delivering reliable front-door visibility, crisp two-way audio and smart event detection over a single Ethernet cable, with no battery to charge. Its tall 5MP 3:4 sensor captures visitors head-to-toe, while on-device smart detections for people, vehicles and animals keep your alerts focused on what matters. Ideal for homes, offices, apartments, reception entries and small-business doors anywhere in Australia. Available in White (UVC-Doorbell-Lite-W) and Black (UVC-Doorbell-Lite-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 5MP (3:4) Audio Two-Way Night Vision IR 5 m Power Single-Cable PoE Why Choose the UniFi Doorbell Lite? Tall 5MP 3:4 View A 1/2.7″ 5MP sensor records 1920 × 2560 in a 3:4 aspect ratio at up to 24 FPS — the portrait field of view shows visitors from head to toe and captures parcels left at the door. Smart Detections On-device detection for people, vehicles and animals filters out nuisance alerts, so you only get notified about the front-door events that matter. Crystal-Clear Two-Way Audio Speak with visitors, delivery drivers or staff in real time straight from the UniFi Protect app — answer the door from anywhere. 5 m IR Night Vision Built-in IR LED illumination and an IR cut filter deliver clear footage up to 5 metres in complete darkness — day or night, you always see who is at the door. IPX5 Weather Resistant A polycarbonate-and-metal body rated IPX5 with a wide −30°C to 50°C operating range suits covered and protected entryways through Australian conditions. Single-Cable PoE Install One Ethernet cable carries both power and data (max 8 W) — no battery charging, no separate power run. Includes a flat wall mount plus a 20° angle wedge for the perfect aim. UniFi Protect — No Subscription Records locally to your UniFi Protect console or NVR with no monthly fees and full local control of live view, recordings and alerts. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installs where supply-chain integrity is required. Technical Specifications Model UVC-Doorbell-Lite (White: UVC-Doorbell-Lite-W / Black: UVC-Doorbell-Lite-B) Resolution 5 MP — 1920 × 2560 (3:4) @ up to 24 FPS Image Sensor 1/2.7″ 5 MP CMOS Lens Fixed focal length Field of View H: 95.8° • V: 131.2° • D: 175.9° Night Vision Built-in IR LED illumination + IR cut filter, up to 5 m Smart Detections People, vehicles, animals Audio Two-way audio Weatherproof Rating IPX5 Network Interface 10/100 MbE RJ45 Power Method PoE, 37–57 V DC • max 8 W Processor Dual-core Arm® Cortex®-A7 Buttons (1) Ring button • (1) Factory reset Mounting Flat wall mount & 20° wedge (included); gang box, junction box (optional) Enclosure Polycarbonate & metal Dimensions 137 × 40 × 26.4 mm Weight 142 g (device) • 165 g (flat mount) • 179 g (20° wedge) Operating Temperature −30°C to 50°C, 20–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-Doorbell-Lite-W) / Black (UVC-Doorbell-Lite-B) Downloads & Resources UVC-Doorbell-Lite Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Doorbell Lite Your choice of White (UVC-Doorbell-Lite-W) or Black (UVC-Doorbell-Lite-B) finish. Mounting Hardware Flat wall mount, 20° angle wedge, and fixings included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Protect host and PoE switch/injector are required and sold separately. Best For Homes & Front Doors See, hear and speak to visitors at the main entry with reliable PoE power and no battery charging. Apartments & Townhouses The compact body suits narrow door frames and tight entry walls in multi-dwelling homes. Offices & Reception Greet and screen visitors at the front desk while smart detections cut nuisance alerts. Small Business Entries Local UniFi Protect recording with no subscription — ideal alongside existing UniFi cameras. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE) running UniFi Protect. Powered by any standard PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts flat to the wall out of the box; a 20° angle wedge is included to aim along the entry. Optional gang box and junction box mounting for tidy professional installs. Frequently Asked Questions Does the Doorbell Lite require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi console or NVR. There are no monthly fees or cloud subscriptions required. What do I need to run the Doorbell Lite? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE — plus a PoE switch to power the doorbell. Is it a PoE doorbell? Yes. The Doorbell Lite is powered and connected over a single Ethernet cable via a 10/100 MbE RJ45 port — no battery to charge. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-Doorbell-Lite-W) suits lighter entries; Black (UVC-Doorbell-Lite-B) suits darker frames and modern doors. Is it weatherproof for outdoor use in Australia? Yes. It carries an IPX5 rating and a −30°C to 50°C operating range, suiting covered and protected entry installations. Is the Doorbell Lite NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the Doorbell Lite is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $214.00 $205.00

• Save -$20.00

  Ubiquiti Ubiquiti UniFi AC Adapter 210W — UACC-Adapter-AC-210W PoE Switch Power Supply

   

  UniFi — NDAA Compliant UniFi AC Adapter 210W — 54V DC PoE Switch Power Supply (UACC-Adapter-AC-210W) The Ubiquiti UniFi AC Adapter 210W (UACC-Adapter-AC-210W) is the genuine replacement power supply for UniFi switches and devices that use an external 54 V DC input. It delivers a full 210 W from 100–240 V AC mains, with a standard C14 inlet and a 1.5 m DC output lead — perfect for restoring a lost or damaged adapter, or keeping a spare on hand. Genuine Ubiquiti stock with fast Australia-wide shipping. 210 W at 54 V DC Supplies a full 210 W output at 54 V DC to power compatible UniFi PoE switches and devices. Universal AC Input Works on 100–240 V AC mains with a standard C14 inlet — use your own region's IEC power lead. 1.5 m DC Output Lead A UL11353 16 AWG cable with a 5.5 × 2.1 mm DC plug gives flexible placement near your switch or rack. Genuine Ubiquiti Spare An authentic factory replacement or spare adapter for compatible UniFi switches that accept a 54 V DC supply. Technical Specifications Model UACC-Adapter-AC-210W (UniFi AC Adapter 210W) Output Power 210 W Input Voltage 100–240 V AC Output Voltage 54 V DC AC Connector C14 inlet (input) Output Plug DC plug 5.5 × 2.1 × 11.5 mm DC Cable UL11353 16 AWG, 1.5 m (4.9 ft) Dimensions 190 × 86 × 26 mm Weight 1.2 kg Operating Temperature 0 to 40°C, 10–90% non-condensing Compliance NDAA compliant Downloads & Resources UACC-Adapter-AC-210W Datasheet Ubiquiti AC Adapter Quick Start Guide Powers compatible UniFi switches/devices that accept an external 54 V DC supply (e.g. UniFi Flex 2.5G 8 PoE) — check your device's required adapter before purchase. Supply your own IEC C13-to-AU mains lead for the C14 inlet. Indoor use, 0–40°C operating range. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $209.00 $189.00

• Save -$12.00

  Ubiquiti Ubiquiti UniFi Access G3 Reader (UA-G3) — NFC & Mobile Door Access Reader

   

  UniFi Access — NDAA Compliant Ubiquiti UniFi Access G3 Reader — NFC & Mobile BLE Door Reader (UA-G3) The UniFi Access G3 Reader is a compact, weatherproof door reader for the UniFi Access ecosystem — unlocking doors with NFC cards & key fobs, Apple/Google Wallet passes, and mobile BLE, plus a handwave request-to-exit gesture. Sealed to IP55 and certified to UL 294, it suits offices, apartments, retail and commercial entrances indoors or out. Available in Black (UA-G3-B) and White (UA-G3-W), with genuine Ubiquiti stock, no licence fees, and fast Australia-wide shipping. Credentials NFC / Wallet / BLE Certified UL 294 Protection IP55 Power Single-Cable PoE Why Choose the UniFi Access G3 Reader? Tap, Wallet & Mobile Unlock Open doors with NFC cards and key fobs, Apple Wallet & Google Wallet passes, or mobile BLE from the UniFi Identity app — one reader covers every credential your team and visitors prefer. Handwave Request-to-Exit A built-in proximity sensor lets people wave to exit — a clean, touch-free release on the inside of the door with no extra exit button to wire. Indoor & Outdoor Ready An IP55-rated polycarbonate-and-glass body with a wide −30°C to 45°C operating range handles entries, foyers, and exposed doorways in tough Australian conditions. UL 294 Access-Control Certified Independently certified to UL 294 and CAN/ULC-60839-11-1 (Grade I), with ESD/EMP protection — engineered for professional, code-compliant installations. Single-Cable PoE Install One Ethernet cable delivers power and data (max 5 W) — no separate PSU. Mounts to a standard in-wall gang box for a flush, tidy finish. UniFi Access — No Subscription Manage doors, users, schedules, and credentials from the UniFi Access app or web console — fully self-hosted with no licence or monthly fees. Broad NFC Support 13.56 MHz NFC reads MIFARE Classic / DESFire, ISO/IEC 14443A/B, 15693, 18092, Sony FeliCa (ID), and NFC Forum tags — easy migration from existing card systems. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model UniFi Access G3 Reader — UA-G3 (Black: UA-G3-B / White: UA-G3-W) Credential Methods NFC cards & key fobs, Apple/Google Wallet, mobile BLE unlock Request to Exit Handwave (proximity sensor) Connectivity BLE 4.1 • NFC 13.56 MHz NFC Read Range < 30 mm NFC Technology ISO/IEC 14443A/B, 15693, 18092 • MIFARE Classic / DESFire • Sony FeliCa (ID) • NFC Forum T1T–T5T • ECP 2.0 Network Interface (1) 10/100 MbE RJ45 Power Method PoE • 48 V DC • max 5 W Weatherproof Rating IP55 (indoor & outdoor use) ESD / EMP Protection Air: ±15 kV • Contact: ±8 kV Indicators R/G/B/W LEDs • speaker • proximity sensor Mounting In-wall gang box (included) • junction box (optional) Enclosure Polycarbonate & glass • aluminium-alloy mount Dimensions / Weight 93 × 40 × 36.5 mm • 82 g Operating Temperature −30°C to 45°C • 5–90% non-condensing UL 294 Levels Destructive attack I • Line security I • Endurance I • Standby power I Certifications CE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1 (Grade I) Management UniFi Access app & web console (no licence fees) Compliance NDAA compliant Colours Available Black (UA-G3-B) / White (UA-G3-W) Downloads & Resources UA-G3 Datasheet UA-G3 Installation Guide What's in the Box UniFi Access G3 Reader Your choice of Black (UA-G3-B) or White (UA-G3-W) finish. Mounting Hardware In-wall gang-box mounting bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Access Hub, door hardware, credentials, and a PoE switch are required and sold separately. Best For Offices & Workplaces Tap, Wallet, or mobile unlock for staff with central scheduling and instant credential revocation. Apartments & Foyers Secure resident and visitor entry on shared doors with handwave exit and no per-door licence fees. Retail & Reception A clean glass-front reader for front-of-house and back-of-house doors, indoors or out. Commercial & Multi-Door Scale across many readers and doors, all managed from one UniFi Access console. Requires a UniFi Access Hub (e.g. UA-Hub / UAH) and a UniFi Access host running the Access application. Powered over a single PoE cable — pair with a UniFi PoE switch for single-pane management. Mounts to a standard in-wall gang box out of the box; a junction-box adapter is available separately. Cat 5e cabling is the minimum recommended for PoE runs. Frequently Asked Questions What credentials does the G3 Reader support? NFC cards and key fobs, Apple Wallet and Google Wallet passes, and mobile BLE unlock from the UniFi Identity app. Does the G3 Reader have a PIN keypad? No. The standard G3 Reader uses tap, Wallet, and mobile unlock. For keypad/PIN entry, choose a UniFi Access reader model with an integrated keypad. Does it need a subscription? No. UniFi Access runs locally on a UniFi Access host with no licence or monthly fees. Can it be used outdoors in Australia? Yes. It is rated IP55 for indoor and outdoor use with a −30°C to 45°C operating range, suiting Australian entryways and exposed doors. What do I need to run it? A UniFi Access Hub plus a UniFi Access host, a PoE switch to power the reader, and your door lock hardware (sold separately). Is the G3 Reader NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-G3 is NDAA Section 889 compliant and UL 294 certified. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $278.99 - $309.00

• Save -$84.00

  Ubiquiti Ubiquiti UniFi Access Reader Flex UA-G3-Flex — NFC, BLE & PIN Door Reader (Black & White)

   

  UniFi Access — NDAA Compliant UniFi Access Reader Flex — NFC, BLE & PIN Door Reader (UA-G3-Flex, Black & White) The UniFi Access Reader Flex (UA-G3-Flex) is a compact, weatherproof door reader that brings modern multi-credential access control to the UniFi Access ecosystem — supporting NFC cards and key fobs, mobile BLE, Apple/Google Wallet, and PIN entry over a single PoE cable. Rated IP55 for indoor and outdoor use and certified to UL 294, it suits offices, apartments, classrooms, meeting rooms, and perimeter entries anywhere in Australia — with centralised, licence-free management. Available in Black (UA-G3-Flex-B) and White (UA-G3-Flex-W), with genuine Ubiquiti stock and fast Australia-wide shipping. Credentials NFC / BLE / PIN Protection IP55 In/Outdoor Power Single-Cable PoE Certified UL 294 Why Choose the UniFi Access Reader Flex? Multi-Credential Access Unlock with NFC cards and key fobs, mobile BLE, Apple/Google Wallet passes, or a PIN on the 12-button capacitive keypad — giving every user a convenient way to enter without compromising security. Apple & Google Wallet Support Staff and residents can store their access pass directly in Apple Wallet or Google Wallet and tap to unlock with their phone — no extra app, no separate card to carry. IP55 — Indoor & Outdoor Ready An IP55-rated polycarbonate, glass and aluminium-alloy body handles rain, dust, and a wide −30°C to 60°C range — ready for entries, gates, and exposed Australian doorways. UL 294 Certified Certified to UL 294 (destructive attack, line security, endurance and standby power Level I) and CAN/ULC-60839-11-1 Grade I, with ESD/EMP protection up to ±15 kV air. Single-Cable PoE Installation One Ethernet cable carries both power and data (max 5 W) — no separate power run. Wall-mounts out of the box, with gang-box and junction-box options available. UniFi Access — No Licence Fees Manage users, schedules, credentials, and event logs centrally through the UniFi Access app or web console — fully local, with no monthly fees or per-door licences. Two Finishes to Match Any Door Choose Black (UA-G3-Flex-B) or White (UA-G3-Flex-W) to blend cleanly into modern offices, apartments, and retail fit-outs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UniFi Access Reader Flex — UA-G3-Flex (Black: UA-G3-Flex-B / White: UA-G3-Flex-W) Credentials NFC cards & key fobs, Mobile BLE, Apple/Google Wallet, PIN (12 capacitive buttons) Connectivity BLE 4.1, NFC (13.56 MHz, read range < 30 mm) NFC Technology ISO/IEC 14443A/B, 15693, 18092; MIFARE Classic / DESFire; Sony FeliCa (ID only); NFC Forum T1T–T5T; ECP 2.0 Networking Interface (1) 10/100 MbE RJ45 port Power Method PoE (UL 294 power-limited Class 2) • 44–57 V DC • max 5 W Weatherproof Rating IP55 • indoor and outdoor use UL 294 Level Destructive attack, Line security, Endurance, Standby power — all Level I ESD/EMP Protection Air: ±15 kV • Contact: ±8 kV Indicators R/G/B/W LED • speaker • factory-reset button Enclosure Polycarbonate, glass, aluminium alloy Mounting Wall (included) • gang-box, junction box (optional) Dimensions / Weight 84 × 84 × 40.8 mm • 165 g Operating Temperature −30°C to 60°C, 5–90% non-condensing Management UniFi Access app & web console (licence-free) Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 (Grade I) Compliance NDAA compliant Colours Available Black (UA-G3-Flex-B) / White (UA-G3-Flex-W) Downloads & Resources UA-G3-Flex Tech Specs Reader Flex Installation Guide What's in the Box UniFi Access Reader Flex Your choice of Black (UA-G3-Flex-B) or White (UA-G3-Flex-W) finish. Wall Mount & Hardware Wall/surface mounting bracket with screws and anchors included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Access Hub, access credentials, door hardware, and a PoE switch/injector are required and sold separately. Best For Offices & Workplaces Secure main entries and internal doors with tap-to-unlock and centralised user scheduling. Apartments & Foyers Give residents NFC, mobile, or PIN entry to lobbies and shared facilities without keys. Schools & Meeting Rooms Control access to classrooms and bookable rooms with per-user schedules and audit logs. Perimeter & Gates IP55 weatherproofing and a wide temperature range suit exposed outdoor entry points. Requires a UniFi Access Hub and a UniFi Access host (UNVR, Cloud Key, or Dream Machine running UniFi Access) for door control and management. Powered by any standard PoE switch or injector (44–57 V DC) — pair with a UniFi PoE switch for single-pane management. Wall-mounts out of the box; gang-box and junction-box adapters available separately. Access credentials, door locks, and strike hardware are sold separately. Frequently Asked Questions What credentials does the Reader Flex support? NFC cards and key fobs, mobile BLE, Apple/Google Wallet passes, and PIN entry via the 12-button capacitive keypad. Does it require a subscription or licence? No. UniFi Access runs locally and is fully licence-free — there are no monthly fees or per-door charges. Can I use it outdoors in Australia? Yes. The Reader Flex is rated IP55 for indoor and outdoor use with a −30°C to 60°C operating range, suiting exposed Australian entries and gates. What do I need to run it? A UniFi Access Hub plus a UniFi Access host (such as a UNVR, Cloud Key, or Dream Machine running UniFi Access), and a PoE switch or injector to power the reader. What's the difference between the Black and White versions? Identical specs and performance — only the finish differs. Black (UA-G3-Flex-B) suits dark or modern fit-outs; White (UA-G3-Flex-W) suits light walls and doorframes. Is the Reader Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-G3-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $328.99 - $329.00

• Save -$280.01

  Ubiquiti Ubiquiti UniFi G3 Gate Starter Kit — Camera & Intercom Access Control (UA-G3-SK-Gate)

   

  UniFi Access — NDAA Compliant UniFi G3 Gate Starter Kit — Gate Access Control with Camera & Intercom (UA-G3-SK-Gate) The UniFi G3 Gate Starter Kit (UA-G3-SK-Gate) is a complete, licence-free gate access control package built around the UniFi Access Gate Hub and the premium G3 Intercom with built-in 8 MP camera, 7″ touchscreen, and two-way audio. Designed for sliding gates, swing gates, boom gates, and controlled entry points, it supports mobile unlock, NFC cards, PIN, Apple/Google Wallet, and Face Unlock — all managed locally through UniFi Access with no monthly fees. Whether you're securing a strata complex, warehouse, gated community, or campus anywhere in Australia, this kit delivers enterprise-grade entry control with genuine Ubiquiti stock and fast Australia-wide shipping. Verification Camera + Intercom Display 7″ Touchscreen Access NFC / BLE / PIN Power PoE++ Powered Why Choose the UniFi G3 Gate Starter Kit? Complete Single-Gate Kit Everything needed to control one gate plus one side door out of the box — Gate Hub, G3 Intercom, PoE++ adapter, and two 2-wire Retrofit Extenders for fast deployment on new or existing cabling. G3 Intercom — See & Speak to Visitors An integrated 8 MP camera, two-way audio doorbell, and 7″ capacitive touchscreen let staff or residents visually verify and grant access to visitors directly from the UniFi Access app or console. Flexible, Secure Authentication Unlock by NFC card & keyfob, mobile BLE, PIN, Apple/Google Wallet, or Face Unlock. Lost credentials can be revoked instantly — no need to change locks or rewire. Gate Hub — Reliable Control The PoE++ Gate Hub drives gate operators via dry-contact relays and manages exit requests, gate-position sensors, side-door locks, and an emergency input. Supports up to 6,000 users with DIN-rail mounting. Built for the Outdoors The G3 Intercom is rated IP65 with an aluminium-alloy and glass body and a wide −30°C to 60°C range — ready for tough Australian gate and perimeter environments. 10 Free Touch Passes Included The kit ships with 10 free 1-year Touch Passes, making it easy to roll out tap-to-enter mobile credentials for staff, tenants, or residents from day one. UniFi Access — No Subscription Manage doors, users, schedules, and live monitoring through the UniFi Access app or web console — fully local, with no licence or monthly fees and no cloud lock-in. NDAA Compliant All components are fully NDAA Section 889 compliant and carry UL 294 access-control certification — suitable for government, defence, and security-sensitive sites. Technical Specifications Kit SKU UA-G3-SK-Gate (UniFi G3 Gate Starter Kit) In the Box (1) Gate Hub • (1) G3 Intercom • (1) PoE++ Adapter (U-PoE++) • (2) 2-Wire Retrofit Extenders Touch Pass 10 free 1-year Touch Passes included Authentication NFC card & keyfob, mobile BLE unlock, PIN, Apple/Google Wallet, Face Unlock Intercom Camera 8 MP (2448 × 3264) • video 2 MP 1200 × 1600 @ 30 FPS Intercom Field of View H: 79.4° • V: 97.5° • D: 118.2° Display 7″ (177 mm) capacitive multi-touch, 1024 × 600, up to 1000 nits Intercom Connectivity BLE 4.2 • NFC 13.56 MHz • (1) GbE RJ45 Intercom Weatherproofing IP65 • aluminium alloy, polycarbonate & glass Gate Hub Doors 1 gate + 1 side door • up to 6,000 users Gate Hub Relays (2) operator + (1) aux dry relays, 30V DC up to 1A • (1) powered side-door lock 12V DC up to 1A Gate Hub Networking (5) 10/100/1000 Base-T • (1) PoE++ input, (4) PoE outputs (30W/port, 55W max aggregate) Power Method PoE++ • included U-PoE++ adapter, 48V DC @ 1.25A, 100–240V AC input Mounting Intercom: wall / gooseneck pedestal • Gate Hub: DIN-rail (included) Operating Temperature −30°C to 60°C, 5–90% non-condensing Management UniFi Access app & web console (licence-free) Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Compliance NDAA compliant Downloads & Resources UA-G3-SK-Gate Tech Specs Installation Guide What's in the Box 1 × UniFi Access Gate Hub PoE++ controller with gate-operator relays, sensor inputs, and a 5-port Gigabit switch with PoE output. 1 × G3 Intercom Outdoor-rated reader with 8 MP camera, 7″ touchscreen, NFC/BLE/PIN, and two-way audio. 1 × PoE++ Adapter + 2 × Retrofit Extenders U-PoE++ power adapter plus two 2-wire Retrofit Extenders for powering and connecting over existing cabling. Not Included Gate motor/operator, electric strike or magnetic lock, lock wiring, and a network switch are sold separately. Best For Strata & Apartments Visual visitor verification and mobile unlock for residents across gated complexes — no shared keys. Warehouses & Logistics Control vehicle and pedestrian gates with relay outputs, exit requests, and full activity logging. Gated Communities Touch Pass and Face Unlock give homeowners fast, secure entry while keeping visitors managed. Schools & Campuses Up to 6,000 users with instant credential revocation and centralised, licence-free management. Requires a UniFi Access host (UNVR, Cloud Key Gen2 Plus, or compatible UniFi gateway) running UniFi Access. Gate Hub is powered by the included U-PoE++ adapter; mount on the supplied DIN-rail inside a junction box for outdoor sites. G3 Intercom mounts to a wall or gooseneck pedestal; surface-angle, flush-mount, and sunshield kits are available separately. Connect your gate operator's dry-contact input to the Gate Hub relay; gate motor and lock hardware are not included. Frequently Asked Questions What's included in the UA-G3-SK-Gate kit? One Gate Hub, one G3 Intercom, one PoE++ adapter, and two 2-wire Retrofit Extenders — plus 10 free 1-year Touch Passes. Does this kit require a subscription? No. UniFi Access is licence-free and runs locally on a UniFi host with no monthly or per-door fees. How do people unlock the gate? By NFC card or keyfob, mobile BLE unlock, PIN, Apple/Google Wallet, or Face Unlock — and remotely from the UniFi Access app. Can it control vehicle gates? Yes. The Gate Hub provides dry-contact operator relays to trigger sliding, swing, and boom gate motors, plus exit-request and gate-position inputs. Is the intercom suitable for outdoor use in Australia? Yes. The G3 Intercom is IP65-rated with an aluminium and glass body and operates from −30°C to 60°C, suiting Australian outdoor gate environments. Is the kit NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and every component is NDAA Section 889 compliant with UL 294 certification — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,556.00 $1,275.99

• Save -$100.00

  Ubiquiti Ubiquiti UniFi Access G3 Reader Pro (UA-G3-Pro) — Touchscreen Door Reader with Camera & Intercom

   

  UniFi Access — NDAA Compliant UniFi Access G3 Reader Pro — Touchscreen Door Reader with Camera & Intercom (UA-G3-Pro) The UniFi Access G3 Reader Pro is Ubiquiti's flagship smart door reader — combining secure multi-method authentication, a built-in 12 MP camera, two-way video intercom, and a 4.7″ capacitive touchscreen in one weatherproof unit. Powered over a single PoE cable and managed centrally through the UniFi Access application with no subscription fees, it suits offices, apartments, education campuses, and any controlled-entry site across Australia. Available in Black (UA-G3-Pro-B) and White (UA-G3-Pro-W), with genuine Ubiquiti stock and fast Australia-wide shipping. Camera 12 MP Sensor Display 4.7″ Touch Protection IP55 Power Single-Cable PoE Why Choose the UniFi Access G3 Reader Pro? Built-In Camera & Video Intercom An integrated 12 MP camera with speaker and microphone enables two-way intercom and doorbell calls — so staff can see and speak with visitors before granting access. Multiple Secure Authentication Methods Unlock with NFC cards & key fobs, PIN code, mobile unlock, Apple/Google Wallet, BLE proximity, or Face Unlock — mix and match for true multi-factor access per user or door. 4.7″ Capacitive Touchscreen A bright 480-nit portrait touchscreen guides users through PIN entry and intercom calls, giving the door a modern, intuitive interface that's easy for staff and visitors alike. IP55 — Indoor & Outdoor Ready An IP55-rated polycarbonate-and-glass enclosure with aluminium-alloy mount and a −30°C to 45°C device range handles real Australian entryways, sheltered and exposed alike. Single-Cable PoE Installation One Ethernet run delivers power and data (max 6 W) back to a UniFi Access Hub — no separate power supply, with ESD/EMP protection built in for reliable deployments. UniFi Access — No Subscription Manage users, schedules, permissions, and access logs centrally through the UniFi Access application — no licence or monthly fees, with full local control. UL 294 Certified & NDAA Compliant Independently certified to UL 294 (Level I) and fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive installations. Technical Specifications Model UA-G3-Pro (Black: UA-G3-Pro-B / White: UA-G3-Pro-W) Authentication NFC card & key fob, PIN, Mobile Unlock, Apple/Google Wallet, BLE, Face Unlock Camera Sensor 12 MP (3072 × 4096) Video Output 2 MP, 1200 × 1600 (3:4) @ 30 FPS Field of View H: 98.6° • V: 125.7° • D: 157.8° Display 4.7″ capacitive touch, 1280 × 286 px, 480 nits, portrait Intercom Two-way intercom & doorbell • built-in microphone & speaker Connectivity BLE 4.2 • NFC 13.56 MHz (ISO/IEC 14443A/B, 15693, 18092; MIFARE; FeliCa ID) Network Interface (1) GbE RJ45 Power Method PoE • 48 V DC • max 6 W ESD/EMP Protection Air: ±15 kV • Contact: ±8 kV Weatherproof Rating IP55 • indoor & outdoor use Enclosure Polycarbonate & glass • aluminium-alloy mount Mounting Wall & gang-box (included); angle mount, junction box (optional) Dimensions / Weight 160 × 40.4 × 40.55 mm • 136 g Operating Temperature Device: −30°C to 45°C • Display: −10°C to 45°C Operating Humidity 5–90% non-condensing Certifications CE, FCC, IC, SRRC, UL 294 (Level I), CAN/ULC-60839-11-1 Compliance NDAA compliant Colours Available Black (UA-G3-Pro-B) / White (UA-G3-Pro-W) Downloads & Resources UA-G3-Pro Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Access G3 Reader Pro Your choice of Black (UA-G3-Pro-B) or White (UA-G3-Pro-W) finish. Wall & Gang-Box Mount Mounting bracket, screws, and anchors included for wall or gang-box installation. Documentation Quick-start guide and installation instructions. Not Included Requires a UniFi Access Hub and a compatible electric lock/strike (sold separately). Best For Offices & Workplaces Touchscreen entry with mobile, card, and face unlock plus full access logs for staff and contractors. Apartments & Buildings Two-way video intercom and doorbell let residents verify and admit visitors at the front door. Education & Campuses Scalable multi-door management through UniFi Access with scheduled, per-user permissions. Government & Secure Sites UL 294 certified and NDAA compliant for installations where supply-chain integrity matters. Requires a UniFi Access Hub running the UniFi Access application to manage doors, users, and permissions. Connects to the Access Hub over a single PoE cable (Cat 5e minimum) for power and data. Mounts to a wall or gang box out of the box; angle and junction-box adapters available separately. Pair with a compatible electric lock or strike to complete the controlled-entry door. Frequently Asked Questions Does the G3 Reader Pro need a subscription? No. UniFi Access runs locally via a UniFi Access Hub. There are no licence or monthly subscription fees. What do I need to run it? A UniFi Access Hub (which powers the reader over PoE and manages it) plus a compatible electric lock or strike to control the door. How can people unlock the door? NFC cards and key fobs, PIN code, mobile unlock, Apple/Google Wallet, BLE proximity, and Face Unlock — you can combine methods for multi-factor access. Can it be installed outdoors in Australia? Yes. It carries an IP55 rating and is rated for indoor and outdoor use, with a −30°C to 45°C device operating range suited to Australian conditions. What's the difference between the Black and White versions? Identical specs and features — only the finish differs. Black (UA-G3-Pro-B) and White (UA-G3-Pro-W) let you match the reader to the door surround. Is the G3 Reader Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G3 Reader Pro is NDAA Section 889 compliant and UL 294 certified — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $693.99 - $799.00

• Save -$129.01

  Ubiquiti Ubiquiti UNVR-Instant — UniFi Protect Compact PoE NVR, 6-Port PoE Switch & HDMI ViewPort

   

  UniFi Protect — NDAA Compliant Ubiquiti UNVR-Instant — UniFi Protect Compact PoE NVR with 6-Port PoE Switch & HDMI ViewPort The Ubiquiti UNVR-Instant is the simplest way to deploy a complete UniFi Protect surveillance system — a compact desktop NVR with a built-in 6-port Gigabit PoE switch, an HDMI ViewPort for local live viewing, and a single 3.5″ HDD bay for local recording. Power and connect up to six 4K UniFi cameras directly from the unit, manage everything through the UniFi Protect app or web interface, and keep full control of your footage with no monthly subscription. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's the ideal recorder for homes, offices, and small businesses across Australia. PoE Ports 6 × Gigabit Managed Cameras Up to 6 × 4K ViewPort HDMI Output Storage 1 × 3.5″ HDD Bay Why Choose the Ubiquiti UNVR-Instant? Built-in 6-Port Gigabit PoE Switch Power and connect up to six UniFi cameras directly from the UNVR-Instant — no separate PoE switch required. A 40 W PoE budget delivers up to 15.4 W per port (802.3af PoE), plus a Gigabit RJ45 uplink to your network. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to display live multi-camera feeds straight from the unit — no PC, tablet, or app required for on-site monitoring. 3.5″ HDD Bay — Local Storage Install a compatible 3.5″ SATA hard drive for local recording, with built-in Data Protection to guard against drive failure. Keep full control of your footage — no cloud, no data leaving your premises. Manage Up to 15 Cameras Scale to suit your site — up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. UniFi Protect & Access — No Subscription Run UniFi Protect cameras and up to 50 UniFi Access hubs from one unit, managed via the UniFi app or web interface — fully local, with no monthly fees. Plug-and-Play Camera Adoption UniFi cameras connected to the PoE ports are automatically discovered and adopted into UniFi Protect — no manual IP configuration or complex setup required. Compact Desktop Form Factor At just 220 × 220 × 47 mm and 1.04 kg, the UNVR-Instant fits neatly on a shelf, in a comms cabinet, or wall / DIN-rail mounted — ideal for homes, small offices, and retail stores. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a mandatory requirement. Technical Specifications Model UNVR-Instant Managed Cameras 6 × 4K • 8 × 2K • 15 × HD Managed Access Hubs Up to 50 Management Applications UniFi Protect, UniFi Access, UniFi Connect Networking Interface 1 × GbE RJ45 uplink • 6 × GbE PoE RJ45 downlink • 1 × HDMI (ViewPort) Storage 1 × 3.5″ HDD bay (drive not included) • Data Protection Processor Quad-core ARM® Cortex®-A55 @ 1.7 GHz Memory 4 GB Display 1.14″ status screen PoE Budget 40 W total • up to 15.4 W per port (PoE / 802.3af) • 44–57 V Power Supply Internal AC/DC, 60 W • 100–240 V AC, 1.5 A max, 50/60 Hz Max. Power Consumption 9 W (excluding PoE / drive) Max. Drive Power Budget 11 W Management Ethernet • Bluetooth Mounting Wall & DIN-rail mount (included) Form Factor Compact desktop Enclosure Polycarbonate Dimensions / Weight 220 × 220 × 47 mm • 1.04 kg Operating Temperature 0°C to 40°C, 5–95% non-condensing Certifications FCC, IC, CE, Electrical Safety, SRRC, Anatel Compliance NDAA compliant Downloads & Resources UNVR-Instant Tech Specs UNVR-Instant Installation Guide What's in the Box UNVR-Instant Unit Compact UniFi Protect PoE NVR with a built-in 6-port PoE switch and HDMI ViewPort. Mounting Kit Wall and DIN-rail mounting hardware included. Documentation Quick-start guide and installation instructions. Not Included A 3.5″ SATA HDD and UniFi cameras are sold separately. Best For Homes & Driveways Power up to six 4K UniFi cameras, record locally, and watch live on your TV via HDMI ViewPort. Retail & Hospitality A self-contained, subscription-free CCTV recorder for shopfronts, cafes, and small stores. Offices & Strata Cover entries, car parks, and common areas with a tidy, low-profile NVR for any comms cabinet. UniFi Protect Starter Systems The recommended starting point for a new UniFi Protect deployment with G6 Turret, Bullet, or Dome cameras. Runs UniFi Protect locally — no monthly fees and no data leaving your premises. Connect up to six UniFi cameras directly to the built-in PoE ports; add more via a switch on the uplink, up to the supported camera count. Install a compatible 3.5″ surveillance-grade SATA HDD (sold separately) for recording. Wall or DIN-rail mountable; status screen and HDMI ViewPort make on-site setup quick. Frequently Asked Questions Does the UNVR-Instant require a UniFi Protect subscription? No. UniFi Protect runs fully locally on the UNVR-Instant. There are no monthly fees and no cloud subscription required. What hard drive do I need? A compatible 3.5″ SATA HDD. Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for 24/7 recording. The drive is not included. How many cameras can it support? Up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. Can I connect more than 6 cameras? Yes. The six built-in PoE ports power local cameras directly; additional cameras can connect via a separate PoE switch on the Gigabit uplink, up to the unit's maximum camera count. Which cameras are compatible? All UniFi Protect cameras, including the G6 Turret, G6 Bullet, G6 Dome, and earlier G4/G5 series. Can it also run UniFi Access? Yes. The UNVR-Instant supports UniFi Access and can manage up to 50 Access hubs alongside UniFi Protect cameras. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $477.00 $347.99

• 

  Ubiquiti Ubiquiti UniFi Etherlighting Patch Cable 0.15m — White/Translucent (NHU-PATCH-EL-0.15)

   

  UniFi Etherlighting — NDAA Compliant Ubiquiti UniFi Etherlighting Patch Cable 0.15m — White / Translucent (NHU-PATCH-EL-0.15) The UniFi Etherlighting Patch Cable is a nano-thin 0.15 m indoor patch lead built to showcase Ubiquiti’s Etherlighting™ effects while delivering high-speed 10 GbE connectivity and PoE+++ support. Its translucent booted RJ45 connectors maximise Etherlighting brightness, and a slim 2.5 mm jacket keeps rack and patch-panel cabling tidy. Genuine Ubiquiti stock with fast Australia-wide shipping. 10 GbE High-Speed Supports data rates up to 10 Gigabits per second for demanding switching, server, and high-bandwidth network links. Etherlighting Translucent RJ45 Translucent booted RJ45 connectors are designed for optimal Etherlighting™ brightness on compatible UniFi switches. Slim 2.5 mm Jacket A nano-thin 2.5 mm outer diameter keeps patch-panel and rack cabling neat and easy to route. PoE+++ Ready Carries power and data together with support up to PoE+++ for high-power UniFi devices. Technical Specifications Model NHU-PATCH-EL-0.15 Length End-to-end: 0.15 m Colour White / Translucent Operating Environment Indoor Supported Data Rate Up to 10 GbE Supported PoE Type Up to PoE+++ Cable Jacket Diameter 2.5 mm (0.1″) Connector Type (2) Translucent booted RJ45 Flame Rating VW-1 (UL1581) Standards TIA-568-B.2 Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $17.00 - $179.99

• Save -$13.00

  Ubiquiti Ubiquiti UniFi Flex 2.5G PoE Switch — 8-Port 2.5GbE PoE++ Managed (USW-Flex-2.5G-8-PoE)

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Flex 2.5G PoE — 8-Port 2.5GbE PoE++ Managed Switch (USW-Flex-2.5G-8-PoE) The UniFi Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) is a compact, fanless Layer 2 managed switch built for high-performance multi-gigabit networks. It delivers eight 2.5 GbE RJ45 ports — all PoE++ capable — plus a 10 GbE RJ45/SFP+ combination uplink, so you can power and connect access points, cameras, and IP phones from a single silent unit. Powered by a PoE+++ uplink or the optional 210W AC adapter, and managed entirely through UniFi Network with no monthly fees, it suits homes, offices, retail, and smart-building sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 8 × 2.5GbE PoE PoE++ on All Ports Uplink 10G RJ45 / SFP+ Cooling Fanless / Silent Why Choose the UniFi Flex 2.5G PoE? 8 × 2.5 GbE PoE++ Ports Every one of the eight 2.5 GbE RJ45 ports supports PoE++ (up to 64W per port by PSE) — ready to power Wi-Fi 7 access points, cameras, and multi-gig devices without a separate injector. 10 GbE Combination Uplink A flexible 10 GbE RJ45 / 10G SFP+ combo uplink gives you a fast, future-proof link back to your core network over copper or fibre. Flexible Powering Run it from the included-capable 210W AC adapter (excluded) for up to 196W of PoE, or power the entire switch from a single PoE+++ uplink for compact, cable-light deployments. Fanless, Silent Operation A passively cooled polycarbonate chassis runs completely silently — ideal for studios, meeting rooms, retail counters, and other noise-sensitive spaces. Versatile Mounting Compact desktop form factor with wall, DIN-rail, and magnetic mounting options, so it fits neatly into cabinets, comms cupboards, and tight installs. UniFi Network — No Subscription Fully managed through the UniFi Network application with VLANs, port mirroring, storm control, and more — local control with no monthly fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex-2.5G-8-PoE (UniFi Flex 2.5G PoE) 2.5 GbE RJ45 Ports 8 (all PoE++) — 2.5G / 1G / 100M / 10M 10 GbE RJ45 Uplink 1 (PoE+++ input) — 10G / 5G / 2.5G / 1G / 100M 10G SFP+ Uplink 1 — 10G / 1G Max. PoE Output Up to PoE++ (64W per port by PSE) Total PoE Availability 210W AC adapter: 196W • PoE+++ input: 76W • PoE++ input: 46W • PoE+ input: 16W Switching Capacity 60 Gbps Non-Blocking Throughput 30 Gbps Forwarding Rate 45 Mpps VLANs / MAC Table 256 VLANs • 4,000 MAC addresses Layer 2 Features STP & RSTP, egress rate limit, flow control, storm control, port isolation, port mirroring, jumbo frames, loop protection Power Method (1) AC/DC adapter (excluded) • (1) PoE+++ Supported Voltage 50–57V DC / PoE Max. Power Consumption 14W (PoE input, excl. PoE output) • 210W including PoE output Cooling Fanless (silent) Management UniFi Network 9.0.114 and later Mounting Compact desktop, wall, DIN, magnetic Enclosure Polycarbonate Dimensions / Weight 212.9 × 99.4 × 33.5 mm • 567 g Operating Temperature −20°C to 45°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Flex-2.5G-8-PoE Tech Specs Ubiquiti Installation Guide Best For Homes & Smart Spaces Multi-gig speed to power Wi-Fi 7 APs and cameras from one silent, compact switch. Offices & Retail PoE++ on every port for phones, APs, and displays with a fast 10G uplink to the core. Comms Cabinets Wall, DIN-rail, and magnetic mounting fit neatly into tight racks and cupboards. PoE-Powered Installs Run the whole switch from a single PoE+++ uplink for cable-light deployments. Adopt and manage with the UniFi Network application (version 9.0.114 or later) on a UniFi Gateway, Cloud Key, or self-hosted controller. Power from the optional 210W AC adapter (excluded) for up to 196W of PoE, or from an upstream PoE+++ source via the 10 GbE uplink. Use the 10 GbE RJ45 or 10G SFP+ combo uplink for a high-speed link back to your aggregation switch or gateway. Mounts to desk, wall, DIN-rail, or magnetic surface out of the box. Frequently Asked Questions How many PoE ports does it have? All eight 2.5 GbE RJ45 ports support PoE++, delivering up to 64W per port (by PSE) for power-hungry access points and cameras. Does it include a power adapter? The 210W AC adapter is sold separately. You can also power the entire switch from a single PoE+++ uplink connection. What uplink options are available? A combination 10 GbE RJ45 / 10G SFP+ uplink lets you connect over copper or fibre at up to 10 Gbps. Do I need a subscription to manage it? No. It is managed through the UniFi Network application with no monthly fees — full local control. Is the Flex 2.5G PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $503.00 $490.00

• Save -$100.00

  Ubiquiti UniFi G5 Bullet 3-Pack – 2K 4MP PoE AI Cameras (UVC-G5-Bullet-3)

   

  UniFi Protect — NDAA Compliant Ubiquiti 4MP G5 Bullet UniFi G5 Bullet 3-Pack — 2K 4MP PoE AI Cameras (UVC-G5-Bullet-3) The UniFi G5 Bullet 3-Pack (UVC-G5-Bullet-3) is the smartest-value way to roll out UniFi Protect surveillance — three G5 Bullet cameras in one bundle, priced below buying three singles. Each camera delivers 2K 4MP resolution (2688 × 1512) at 30 FPS, 9 m IR night vision, on-device AI detection for people, vehicles and animals, a built-in microphone, and a 3-axis adjustable mount. Powered over a single PoE cable per camera at just 4 W. With three cameras in the box, it's ideal for covering multiple rooms, entries and angles around a home, office or shop anywhere in Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Resolution 2K / 4MP Night Vision IR 9 m Protection IP55 / IK04 Bundle 3 Cameras Why the 3-Pack? Three Cameras, One Lower PriceThe G5 Bullet 3-Pack bundles three fully-featured 2K 4MP UniFi Protect cameras at a discount versus buying singles — the most cost-effective way to cover multiple rooms, entries and angles in a single purchase. Multi-Angle CoverageWith three cameras you can secure front door, driveway and backyard, or shop entry, counter and stockroom, in one go — purpose-built for whole-home and small-business multi-camera layouts. 2K 4MP Clarity — 2688 × 1512 @ 30 FPSEach camera captures crisp 4MP footage at up to 30 FPS from a 5MP CMOS sensor — sharp enough to identify faces and detail across day and night scenes. On-Device AI DetectionSmart detection identifies people, vehicles and animals — cutting nuisance alerts and surfacing only the events that matter, straight to the UniFi Protect app. 9 m IR Night VisionBuilt-in IR LEDs with an IR cut filter deliver clear 9-metre night vision in total darkness for reliable 24/7 monitoring. Single-Cable PoE — Just 4 WEach camera draws a single PoE cable for both power and data at only 4 W — no separate power runs, easy to deploy across three locations from one PoE switch. IP55 Weather Resistance + IK04An IP55-rated polycarbonate and aluminium-alloy housing with IK04 impact resistance suits indoor and sheltered outdoor positions such as under eaves and covered car parks. NDAA Compliant — No SubscriptionFully NDAA Section 889 compliant and managed locally through UniFi Protect — no monthly fees, no cloud lock-in, full local control. Technical Specifications (per camera) Model UVC-G5-Bullet (3-Pack: UVC-G5-Bullet-3) Resolution 2K — 4 MP, 2688 × 1512 (16:9) @ 30 FPS Image Sensor 5 MP CMOS Lens Fixed focal length Field of View H: 84.4° • V: 45.4° • D: 99.8° Night Vision Built-in IR LED illumination + IR cut filter, up to 9 m AI / Smart Detection People, vehicles, animals Audio Built-in microphone Weatherproof Rating IP55 (partial outdoor, while covered) Impact / Tamper Resistance IK04 Network Interface 10/100 MbE RJ45 Power Method PoE, 37–57 V DC • max 4 W Processor Dual-core Arm® Cortex®-A7 Mounting Wall, ceiling & pole (included); junction box (optional) • 3-axis adjustment Enclosure Polycarbonate & aluminium alloy Dimensions ⌀75.5 × 74.4 mm (⌀75.5 × 150 mm with mount) Weight 225 g (315 g with mount) Operating Temperature −20°C to 40°C, 0–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UVC-G5-Bullet Datasheet Ubiquiti Bullet Quick Start Guide What's in the Box 3× UVC-G5-Bullet CamerasThree UniFi G5 Bullet camera units, each with a 3-axis adjustable mount and pre-attached RJ45 cable. 3× Mounting Hardware SetsWall, ceiling and pole mount hardware with screws and anchors for each camera. DocumentationQuick-start guide and installation instructions. Not IncludedA PoE switch/injector (one PoE port per camera) and a UniFi Protect host are required and sold separately. Best For Whole-Home Coverage Three cameras secure front door, driveway and backyard with accurate person and vehicle alerts in one bundle. Small Business & Retail Cover entry, counter and stockroom while AI filtering cuts nuisance notifications. Offices & Warehouses Local UniFi Protect recording with no subscription — ideal for multi-camera commercial zones. Sheltered Outdoor IP55 and 9 m IR keep eaves, carports and covered entries covered around the clock. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key+, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any PoE switch — one PoE port per camera; pair with a UniFi PoE switch for single-pane management. All three cameras adopt into a single UniFi Protect host and are managed from one app. 3-axis manual adjustment lets you fine-tune each camera's field of view after mounting. Frequently Asked Questions Does the 3-Pack require a UniFi Protect subscription?No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. Do all three cameras connect to the same NVR?Yes. All three G5 Bullet cameras adopt into a single UniFi Protect host (UNVR, Cloud Key Gen2 Plus, or a Dream Machine Pro/SE/Wall) and are managed together in one app. What do I need to power the cameras?One PoE port per camera. A PoE switch with at least three PoE ports — or three individual PoE injectors — powers the full 3-Pack at just 4 W per camera. Can the cameras be used outdoors in Australia?The G5 Bullet is rated IP55 with IK04 impact resistance and a −20°C to 40°C range — suited to indoor and sheltered outdoor positions such as under eaves and covered car parks rather than fully exposed locations. Is the 3-Pack better value than three singles?Yes. The UVC-G5-Bullet-3 bundle is priced below buying three individual G5 Bullet cameras — the recommended option for any multi-camera deployment. Is the G5 Bullet NDAA compliant?Yes. Ubiquiti is a US-based manufacturer and the G5 Bullet is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $899.00 $799.00

• 

  Ubiquiti Ubiquiti UniFi Gateway Max (UXG-Max) — Multi-WAN 2.5G Security Gateway, 2.3 Gbps IDS/IPS

   

  UniFi Gateway — NDAA Compliant UniFi Gateway Max (UXG-Max) — Multi-WAN 2.5G Security Gateway with USB-C Power The UniFi Gateway Max (UXG-Max) is the high-performance step up in the UniFi gateway range — a compact, USB-C powered multi-WAN security gateway with full 2.5 Gigabit support across all five ports, 2.3 Gbps IDS/IPS routing, and the ability to remap LAN ports to WAN for true multi-WAN failover and load balancing. Designed for small-to-medium sites in Australia that need more than Gigabit throughput, the UXG-Max delivers enterprise-grade security and networking in a palm-sized, fanless enclosure — no rack space required. Genuine Ubiquiti stock with fast Australia-wide shipping. IDS/IPS 2.3 Gbps Ports 5 × 2.5GbE Multi-WAN Up to 4 WAN Power USB-C 5V/3A Why Choose the UniFi Gateway Max? 2.3 Gbps IDS/IPS Routing Full signature-based IDS/IPS threat detection at 2.3 Gbps — making it ideal for sites with high-speed NBN, fibre, or multi-WAN connections that need next-gen security without a throughput bottleneck. Full 2.5 Gigabit on All Ports All five ports run at 2.5 GbE (2.5G/1G/100M/10M) — future-proofing your network for multi-gig ISP connections and 2.5G switches or APs without any bottleneck at the gateway. Multi-WAN — Up to 4 WAN Ports Remap LAN ports to WAN to support multi-WAN failover and load balancing (max 4 WAN) — keeping your network online even if one ISP connection drops. UniFi LTE Backup adds an extra failover path. WireGuard, OpenVPN, L2TP & IPsec Built-in WireGuard and OpenVPN VPN servers, L2TP, OpenVPN/WireGuard VPN client, IPsec and Site Magic site-to-site VPN, plus one-click Teleport zero-config VPN — all licence-free. Licence-Free SD-WAN & Dynamic Routing Policy-based WAN/VPN routing, OSPF dynamic routing, advanced QoS, advanced NAT, integrated RADIUS server, and RadSec — all included at no extra cost. Next-Gen Zone-Based Firewall Stateful firewall, application-aware Layer 7 firewall, DPI and traffic identification, content filtering, region/domain/app filtering, ad blocking, and 55,000+ IPS signatures with CyberSecure. USB-C Powered — 9.6W Max Powered by the included USB-C adapter (5V/3A) drawing just 9.6W maximum — silent, fanless, and suitable for any location including a small comms cabinet or behind a desk. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. UXG-Max vs UXG-Lite — Which Should You Choose? Choose UXG-Max if you need… Multi-gig (2.5G) throughput, 2.3 Gbps IDS/IPS performance, multi-WAN failover, or a future-proof gateway for high-speed NBN/fibre connections. Best for growing SMBs and multi-WAN sites. Choose UXG-Lite if you need… A budget-friendly, ultra-compact gateway for standard Gigabit connections. Best for home networks and small offices where 1G throughput is sufficient and cost is a priority. Ideal Use Cases Small to Medium Business High-speed NBN or fibre connections with multi-WAN failover, IDS/IPS, and VPN for offices, retail stores, and professional services firms across Australia. Advanced Home Networks Power users who want 2.5G throughput, IDS/IPS, and WireGuard VPN in a compact, silent, USB-C powered device. Multi-WAN & Failover Sites requiring multi-WAN failover or load balancing across ISP connections — remap LAN ports to WAN for true redundancy, with UniFi LTE Backup as an additional path. UXG-Lite Upgrade The natural upgrade from the UXG-Lite for sites that have outgrown Gigabit throughput or need multi-WAN and higher IDS/IPS performance. Technical Specifications Model UXG-Max Processor Quad-core ARM® Cortex®-A53 @ 1.5 GHz System Memory 2 GB Port Layout 5 × 2.5 GbE RJ45 (2.5G/1G/100M/10M) Default WAN 1 × 2.5 GbE RJ45 • max 4 WAN ports IDS/IPS Throughput 2.3 Gbps IDS/IPS Signatures 55,000+ with CyberSecure Power Method USB Type-C (5V DC/3A, adapter included) Supported Voltage 100–240V AC Max Power Consumption 9.6W Security Stateful & Layer 7 firewall, DPI, IPS/IDS, content/region/domain/app filtering, ad blocking VPN WireGuard • OpenVPN • L2TP • IPsec • Site Magic • Teleport SD-WAN & Routing Licence-free SD-WAN, OSPF, multi-WAN load balancing, advanced QoS, advanced NAT, RADIUS/RadSec Management Ethernet • Bluetooth • UniFi Network app Enclosure Polycarbonate • compact desktop Dimensions / Weight 141.8 × 127.6 × 30 mm • 520 g Operating Temperature −10°C to 40°C, 5–95% non-condensing Certifications CE, FCC, IC, Anatel Compliance NDAA compliant UniFi Network Requirement Version 8.1.113 or later What's in the Box UXG-Max Unit Compact multi-WAN 2.5G UniFi security gateway with 5 × 2.5GbE RJ45 ports. USB-C Power Adapter USB Type-C power adapter (5V/3A, 100–240V) included. Quick-Start Guide Installation guide and documentation included. Controller Required Requires UniFi Network 8.1.113+ on a Cloud Key, UniFi OS Console, or Official UniFi Hosting. Not a standalone device. Frequently Asked Questions Does the UXG-Max work as a standalone router? No. The UXG-Max requires a UniFi Network controller (Cloud Key, UniFi OS Console, or Official UniFi Hosting running version 8.1.113 or later) to function. What is the difference between the UXG-Max and UXG-Lite? The UXG-Max has 2.5G ports on all interfaces, 2.3 Gbps IDS/IPS throughput, multi-WAN capability via remappable LAN ports, and 2GB RAM. The UXG-Lite has 1G ports and lower IDS/IPS throughput, but is more affordable for standard Gigabit deployments. Can the UXG-Max do multi-WAN failover? Yes. LAN ports can be remapped to WAN (up to 4 WAN), enabling multi-WAN failover and load balancing across ISP connections, with optional UniFi LTE Backup. Does it support VPN? Yes. WireGuard, OpenVPN server/client, L2TP, IPsec, Site Magic site-to-site, and Teleport zero-config VPN are all supported with no additional licensing fees. Is it suitable for high-speed NBN or fibre connections? Yes. With 2.5G ports and 2.3 Gbps IDS/IPS throughput, the UXG-Max handles multi-gig ISP connections without bottlenecking your network — ideal for 1 Gbps+ NBN or fibre plans. Does it have Wi-Fi? No. The UXG-Max is a wired gateway only. For Wi-Fi, pair it with UniFi Access Points managed through the same UniFi Network controller. Downloads & Resources UXG-Max Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $409.99

• Save -$41.00

  Ubiquiti Ubiquiti UniFi Cloud Key+ UCK-G2-SSD — UniFi OS Console, 1TB SSD, PoE, UniFi Protect NVR

   

  UniFi OS Console — Controller + Protect NVR — NDAA Compliant UniFi Cloud Key+ (UCK-G2-SSD) — UniFi OS Console with 1TB SSD, PoE Powered & UniFi Protect NVR The UniFi Cloud Key+ (UCK-G2-SSD) is the compact, PoE-powered UniFi OS Console that runs the full UniFi application suite — including UniFi Network, UniFi Protect, and UniFi Access — with a pre-installed 1TB SSD for local camera recording. Connect and power it from any PoE switch port, manage your entire UniFi network and camera system from one device, and access everything remotely via the UniFi Site Manager at unifi.ui.com — no subscription required. Genuine Ubiquiti stock with fast Australia-wide shipping. Storage 1TB SSD Power PoE / USB-C Max Cameras 8 × 4K Display 1.42″ OLED Why Choose the UniFi Cloud Key+? Pre-Installed 1TB SSD — Ready for UniFi Protect Ships with a 1TB 2.5″ SATA SSD pre-installed and ready for UniFi Protect camera recordings — no separate NVR or HDD required. The SSD is user-upgradeable for even more storage capacity. PoE Powered — Single Cable Setup Connect and power the Cloud Key+ from any standard PoE switch port via a single Ethernet cable — no separate power adapter required. Optional USB-C Quick Charge 2.0/3.0 power also supported. Full UniFi Application Suite Runs UniFi Network, UniFi Protect, and UniFi Access from a single device — manage your switch, AP, camera, and door-access infrastructure without a separate NVR or cloud key. UniFi Site Manager Integration Connects directly to the UniFi Site Manager at unifi.ui.com for remote management, multi-site visibility, and centralised control — no VPN or port forwarding required. Supports Up to 8 × 4K Cameras When dedicated to UniFi Protect, the Cloud Key+ supports up to 8 × 4K cameras, 14 × 2K cameras, or 24 × HD cameras — ideal for small to medium camera deployments. 1.42″ OLED Status Display The built-in greyscale OLED display shows system status, IP address, storage health, and network information at a glance — no app or PC required for on-site diagnostics. Bluetooth Instant Setup Initial setup via Bluetooth using the UniFi Network app — no console cable or complex configuration required. Up and running in minutes. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations across Australia where supply-chain integrity is a requirement. Ideal Use Cases Home & Small Office Networks The ideal all-in-one controller and NVR for home and small office UniFi deployments — manage switches, APs, and up to 8 × 4K cameras from one PoE-powered device. UniFi Protect Camera Systems Add UniFi Protect camera recording to any existing UniFi network without a separate UNVR — the 1TB SSD provides ample storage for small camera deployments. Multi-Site Management Connect to UniFi Site Manager for centralised remote management of multiple sites — ideal for IT managers and MSPs overseeing multiple UniFi deployments. UDM-Pro Alternative For deployments that already have a separate gateway and switch, the Cloud Key+ provides the controller and NVR functionality of a UDM-Pro at a lower cost and smaller footprint. Technical Specifications Model UCK-G2-SSD Processor Octa-core Arm® Cortex®-A53 Memory 3 GB RAM • 32 GB eMMC SSD 1 TB 2.5″ SATA SSD (pre-installed, user-upgradeable*) Network Port 1 × Gigabit RJ45 Power Method PoE • USB-C Quick Charge 2.0/3.0 (9V DC, 2A) optional Max Power Consumption 9.6 W Display 1.42″ greyscale OLED Managed Cameras 8 × 4K • 14 × 2K • 24 × HD (Protect only) Managed Access Hubs 80 (UniFi Access) Management Ethernet • Bluetooth Dimensions 131.2 × 27.1 × 134.2 mm Weight 560 g Enclosure Anodised aluminium Operating Temperature 0°C to 35°C, 20–80% non-condensing Certifications CE, FCC, IC, Anatel, SRRC Compliance NDAA compliant *SSD is user-upgradeable. Only drives that operate on 5V power are supported — drives requiring additional power are not compatible. What's in the Box UCK-G2-SSD Unit UniFi Cloud Key+ with 1TB SSD pre-installed and UniFi OS pre-configured. Power Options PoE-powered via Ethernet. Optional USB-C Quick Charge adapter (not included — requires QC 2.0/3.0 compliant adapter). Quick-Start Guide Installation guide and documentation included. PoE Switch Required A PoE switch or PoE injector is required to power the Cloud Key+ via Ethernet. Not included. Best For Homes & Small Offices All-in-one UniFi controller and Protect NVR powered from a single PoE cable. UniFi Protect Sites Local 1TB recording for up to 8 × 4K cameras with no monthly fees. MSPs & Multi-Site Centralised remote management of multiple sites via UniFi Site Manager. Gov & Compliance NDAA Section 889 compliant for defence and security-sensitive deployments. Frequently Asked Questions Does the Cloud Key+ require a subscription? No. UniFi Network and UniFi Protect run fully locally on the Cloud Key+. Remote access via UniFi Site Manager is free with a UniFi account — no monthly fees. Can it run UniFi Network and UniFi Protect at the same time? Yes, but camera capacity is reduced when running both applications simultaneously. For maximum camera support, dedicate the Cloud Key+ to UniFi Protect only. Can I upgrade the SSD? Yes. The 2.5″ SATA SSD is user-upgradeable. Only drives that operate on 5V power are supported — drives requiring additional voltage are not compatible. What is the difference between the Cloud Key+ and UDM-Pro? The Cloud Key+ is a controller and NVR only — it has no built-in gateway or routing. The UDM-Pro is an all-in-one console with a built-in security gateway, 10G SFP+, and NVR HDD bay. Choose the Cloud Key+ if you already have a separate gateway. Does it need a PoE switch? Yes. The Cloud Key+ is powered via PoE from a PoE switch or PoE injector. Alternatively, it can be powered via a USB-C Quick Charge 2.0/3.0 compliant adapter (not included). Is the Cloud Key+ NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UCK-G2-SSD is NDAA Section 889 compliant — suitable for government and security-sensitive sites in Australia. Downloads & Resources UCK-G2-SSD Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $570.00 $529.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 8M Black — Cat5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-8M-BK)

   

  UniFi Accessory — NDAA Compliant UniFi Patch Cable Outdoor 8M Black — Cat5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-8M-BK) The UniFi Patch Cable Outdoor 8M Black is a rugged, all-weather Cat5e patch cable built to keep your outdoor UniFi devices reliably connected in the harshest conditions. It combines a shielded RJ45 plug, internal foil shielding, and a built-in ESD drain wire, all sealed inside a weatherproof thermoplastic-elastomer jacket — ideal for cameras, access points, and gateways across any Australian site. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather Protection A weatherproof TPE insulating jacket and shielded RJ45 plug stand up to rain, dust, and UV for dependable outdoor connectivity. Shielded & ESD-Protected Internal foil shielding (STP) plus an integrated ESD drain wire reduce interference and protect connected equipment. 8-Metre Reach 24 AWG stranded copper conductors in an 8 m length comfortably span the gap to outdoor cameras and APs. Technical Specifications Model UACC-Cable-Patch-Outdoor-8M-BK Cable Length 8 m Cable Type Category 5e Shielding Type STP (internal foil shielding) Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm Bend Radius Min. 24 mm Flame Rating VW-1 (UL1581) Cable Colour Black Weight 315 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Compliance NDAA compliant Downloads & Resources UACC-Cable-Patch-Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $25.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable Outdoor 5M Black — Cat 5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-5M-BK / NHU-UAC-O-5M-BLK)

   

  UniFi Outdoor Cat 5e — NDAA Compliant Ubiquiti UniFi Patch Cable Outdoor 5M Black — Cat 5e Weatherproof RJ45 (UACC-Cable-Patch-Outdoor-5M-BK) The UniFi Patch Cable Outdoor 5M (Black) is a rugged, all-weather Category 5e patch cable built to survive the harshest outdoor conditions. With a shielded RJ45 plug, internal foil shielding, an integrated ESD drain wire and a weatherproof TPE jacket, it’s the reliable way to connect outdoor UniFi cameras, access points and devices anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. All-Weather Shielded Build Shielded STP construction with internal foil shielding and an integrated ESD drain wire protects signal integrity in tough outdoor environments. Weatherproof TPE Jacket A 6 mm thermoplastic-elastomer jacket resists UV, moisture and the elements, rated for operation from −40°C to 80°C. 24 AWG Stranded Copper Flexible 24 AWG stranded copper conductors deliver dependable Cat 5e performance to your outdoor UniFi gear. NDAA Compliant Manufactured by Ubiquiti and NDAA Section 889 compliant — suitable for government and security-sensitive installations. Model UACC-Cable-Patch-Outdoor-5M-BK (NHU-UAC-O-5M-BLK) Cable Length 5 m Cable Type Category 5e Shielding STP (shielded twisted pair) with internal foil shielding & ESD drain wire Connector Shielded RJ45 plug Conductor 24 AWG stranded copper Jacket Material Thermoplastic elastomer (TPE) Jacket Diameter 6 mm Bend Radius Min. 24 mm Flame Rating VW-1 (UL1581) Cable Colour Black Weight 200 g Operating Temperature −40°C to 80°C Installation Temperature −20°C to 60°C Standards TIA/EIA-568-B.2, ISO/IEC 11801 Compliance NDAA compliant UACC-Cable-Patch-Outdoor Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $21.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 3m Black Cat6 RJ45 Ethernet (U-Cable-Patch-3M-RJ45-BK)

   

  Genuine UniFi — NDAA Compliant UniFi Patch Cable 3m Black — Cat6 RJ45 Ethernet, Ultra-Thin 3mm (U-Cable-Patch-3M-RJ45-BK) The UniFi Patch Cable 3m (U-Cable-Patch-3M-RJ45-BK) is a genuine Ubiquiti ultra-thin Cat6 patch lead in black, with a slim 3 mm jacket and bendable booted RJ45 connectors at both ends for clean, tidy runs in racks, wall plates, and tight installs. Supporting Gigabit Ethernet and up to PoE+++, it’s the ideal patch lead for connecting UniFi switches, access points, and cameras — with genuine Ubiquiti stock and fast shipping Australia-wide. Ultra-Thin 3mm Jacket A slim 3 mm TPE jacket with a minimum 24 mm bend radius keeps cabling neat and flexible in dense patch panels and tight spaces. Bendable Booted RJ45 Both ends feature bendable booted RJ45 connectors that flex to suit your install while protecting the latch and conductors. Gigabit + PoE+++ Ready Supports Gigabit Ethernet data rates and up to PoE+++, powering and connecting UniFi switches, APs, and cameras over a single lead. Cat6 Certified Built to TIA/EIA-568-B.2 and ISO/IEC 11801 standards with 30 AWG stranded copper conductors for reliable performance. Technical Specifications Model U-Cable-Patch-3M-RJ45-BK Length 3 m Colour Black Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Up to PoE+++ Connectors (2) Bendable booted RJ45 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Bend Radius Min. 24 mm (0.94″) Operating Environment Indoor Flame Rating FT-2 (UL1581) Standards TIA/EIA-568-B.2, ISO/IEC 11801 Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $13.99

• Save -$24.86

  Ubiquiti Ubiquiti UniFi Switch Flex XG (USW-Flex-XG) — 4-Port 10GbE Managed Switch

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex XG — 4-Port 10GbE Managed Layer 2 Switch (USW-Flex-XG) The UniFi Switch Flex XG (USW-Flex-XG) is a fully managed, multi-gigabit Layer 2 switch with four 10GbE RJ45 ports and a single GbE 802.3at PoE+ input — perfect for high-throughput links to NAS units, servers, NVRs, and 10G uplinks. Its slim, fanless housing sits neatly on a desktop, and the whole switch is managed from anywhere through the powerful UniFi Network web app and mobile app. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. 10GbE Ports 4 × RJ45 Power Input GbE PoE+ (802.3at) Management Managed L2 Design Fanless & Slim Why Choose the UniFi Switch Flex XG? Four 10GbE RJ45 Ports Four full 10 Gigabit RJ45 ports deliver the bandwidth heavy workloads demand — ideal for NAS, servers, high-resolution NVRs, editing workstations, and 10G uplinks over standard copper cabling. GbE PoE+ Input A single GbE 802.3at PoE+ RJ45 input can power the switch directly from an upstream PoE+ source, simplifying installs where a nearby power outlet isn’t available. Fully Managed Layer 2 Configure VLANs, monitor traffic, and manage the switch from anywhere through the intuitive UniFi Network web application and mobile app — full control from a single pane of glass. Compact, Fanless Housing A slim, silent fanless design sits neatly on a desktop or shelf. Keep the surface clear and never stack other hardware on top — unobstructed airflow keeps it cool and reliable. Flexible Powering Options Power the USW-Flex-XG from a PoE+ input or a 5 V, 5 A USB-C adapter — flexible deployment whether at a desk, in a rack room, or out at the edge. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex-XG Switch Type Fully managed, multi-gigabit Layer 2 10GbE Ports (4) 10GbE RJ45 Management / PoE Input (1) GbE, 802.3at PoE+ RJ45 input Management UniFi Network web application & mobile app Power Options 802.3at PoE+ input or 5 V, 5 A USB-C adapter Cooling Fanless (passive) Housing Compact, slim — desktop mountable Compliance NDAA compliant Downloads & Resources USW-Flex-XG Datasheet Ubiquiti Installation Guide Best For NAS & Servers Give storage and servers dedicated 10GbE links for fast backups, transfers, and multi-user access. High-Resolution NVRs Handle the throughput of multi-camera 4K UniFi Protect recording without bottlenecks. Creative Workstations 10G copper to editing and design machines keeps large-file workflows moving. 10G Uplinks Aggregate and uplink other UniFi switches at multi-gigabit speed over standard RJ45. Managed through UniFi Network — a UniFi controller (Cloud Key, Dream Machine, or self-hosted) is recommended for full configuration. Power via an upstream 802.3at PoE+ source or a 5 V, 5 A USB-C adapter. Fanless design — do not stack other hardware on top of the switch, as this affects heat dissipation. Designed for desktop placement with a slim, compact footprint. Frequently Asked Questions How many 10GbE ports does the USW-Flex-XG have? Four 10GbE RJ45 ports, plus one GbE 802.3at PoE+ RJ45 input used for management and powering the switch. How is the Switch Flex XG powered? It can be powered from an upstream 802.3at PoE+ source via its GbE input, or with a 5 V, 5 A USB-C adapter. Is it a managed switch? Yes. It is a fully managed Layer 2 switch, configured and monitored from anywhere through the UniFi Network web app and mobile app. Is the USW-Flex-XG NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $573.85 $548.99

• 

  Ubiquiti UniFi Patch Cable 1m White, Both End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter U-Cable-Patch-1M-RJ45

   

  Ubiquiti UniFi Patch Cable Single Unit, 1m, White, End Bendable to 90 Degree, RJ45 Ethernet Cable, Cat6, Ultra-Thin 3mm Diameter Ultra-thin patch cable with GbE support and flexible, bendable boots for enhanced installation versatility. Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 1m Pass TIA-568-B.2 Cat6 Channel test by Fluke

  Read more less

   

  $18.00

• Save -$17.91

  Ubiquiti Ubiquiti UniFi Switch Enterprise 24 PoE (USW-Enterprise-24-PoE) — 12x 2.5GbE + 12x 1GbE PoE+, 2x 10G SFP+ Managed Layer 3

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Enterprise 24 PoE — 12x 2.5GbE + 12x 1GbE PoE+, 2x 10G SFP+, Managed Layer 3 (USW-Enterprise-24-PoE) The UniFi Switch Enterprise 24 PoE is a managed Layer 3 switch built for high-density Wi-Fi 6 deployments and modern multi-gig networks. It delivers (12) 2.5GbE PoE+ ports for next-generation access points, (12) Gigabit PoE+ ports, and (2) 10G SFP+ uplinks for fibre backhaul — all driven by a 400W PoE budget. With a 1.3″ touchscreen, single-row RJ45 layout for clean patch-panel cabling, and full UniFi Network management, it is ideal for offices, campuses, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x PoE+ RJ45 PoE Budget 400W Multi-Gig 12x 2.5GbE Uplinks 2x 10G SFP+ Why Choose the UniFi Switch Enterprise 24 PoE? Built for Wi-Fi 6 & Multi-Gig Twelve 2.5GbE PoE+ ports deliver the bandwidth and power modern Wi-Fi 6 access points demand, eliminating the Gigabit bottleneck on high-throughput links. 24 PoE+ Ports, 400W Budget Every RJ45 port supports 802.3af/at PoE+ up to 34.2W per port, with a 400W total PoE capacity to power APs, cameras, and phones over a single cable. 10G SFP+ Fibre Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC uplinks to your core network, preventing congestion as your deployment scales. Managed Layer 3 Switching Full Layer 3 routing, VLANs, and inter-VLAN routing managed through the UniFi Network application — enterprise control with a clean, intuitive interface. 1.3″ Touchscreen Display An onboard 1.3″ touchscreen with AR switch management shows port status, throughput, and PoE usage at a glance — no laptop needed on site. Single-Row RJ45 Layout A single-row port design keeps patch-panel cabling tidy and straightforward, simplifying installation and ongoing maintenance in the rack. Redundant Power Support UniFi SmartPower Redundant Power System (USP-RPS) DC input protects against internal PSU interruption or failure for mission-critical uptime. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Enterprise-24-PoE Switch Type Managed Layer 3 PoE Gigabit Ethernet Switch 2.5G Ports (12) 100/1000/2500 Mbps RJ45 with 802.3af/at PoE+ Gigabit Ports (12) 10/100/1000 Mbps RJ45 with 802.3af/at PoE+ SFP+ Ports (2) 1/10G SFP+ Total PoE Capacity 400W Max PoE+ per Port (PSE) 34.2W PoE Standards IEEE 802.3af/at PoE+ (Pins 1, 2+; 3, 6-) Total Non-Blocking Throughput 62 Gbps Switching Capacity 124 Gbps Forwarding Rate 92.25 Mpps Display 1.3″ touchscreen with AR switch management Power Method (1) Universal AC: 100–240VAC, 8.5A Max, 50/60 Hz Redundant Power (1) USP-RPS DC input: 52VDC, 7.7A; 11.5VDC, 8.7A Power Supply AC/DC, Internal, 550W Max Power Consumption 550W Voltage Range (802.3af) 44 to 57V Voltage Range (802.3at) 50 to 57V ESD/EMP Protection Air: ±16 kV, Contact: ±12 kV Enclosure / Mount SGCC Steel Dimensions 442.4 × 43.7 × 325 mm (17.4 × 1.7 × 12.8″) Weight 5.11 kg (without mount) / 5.2 kg (with mount) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–95% non-condensing Management UniFi Network application (v5.14.12 or higher) Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Enterprise-24-PoE Datasheet Ubiquiti Quick Start Guide Best For Wi-Fi 6 Deployments 2.5GbE PoE+ ports unlock the full throughput of high-density Wi-Fi 6 access points. Offices & Campuses Managed Layer 3 routing, VLANs, and 400W PoE for multi-floor business networks. Retail & Hospitality Power APs, cameras, and VoIP phones over a single cable with clean rack cabling. Surveillance Networks 10G SFP+ uplinks and PoE+ ports keep camera and NVR traffic flowing without bottlenecks. Managed through the UniFi Network application — pair with a UniFi gateway, Cloud Key, or Dream Machine for full control. Standard 1U rack-mount form factor; mounting hardware included (SGCC steel). Use 10G SFP+ ports for fibre or DAC uplinks to your core switch or gateway. Add a USP-RPS unit for redundant DC power on mission-critical sites. Frequently Asked Questions What is the total PoE budget of this switch? The USW-Enterprise-24-PoE provides a 400W total PoE capacity across all 24 PoE+ ports, with up to 34.2W per port (802.3af/at). Which ports support 2.5GbE? Twelve of the RJ45 ports support 100/1000/2500 Mbps with PoE+, ideal for Wi-Fi 6 access points. The other twelve are Gigabit PoE+ ports. Is this a Layer 3 managed switch? Yes. It is a managed Layer 3 switch supporting VLANs and inter-VLAN routing, configured through the UniFi Network application. What do I need to manage it? A UniFi Network host such as a UniFi gateway, Cloud Key Gen2 Plus, or Dream Machine Pro/SE running UniFi Network v5.14.12 or higher. Does it support redundant power? Yes. It includes a USP-RPS DC input for UniFi SmartPower redundancy, protecting against internal PSU failure. Is the switch NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,524.90 $1,506.99

• Save -$26.01

  Ubiquiti Ubiquiti UniFi Protect All-In-One Smart Sensor — Motion & Environmental (UP-Sense)

   

  UniFi Protect — NDAA Compliant UniFi Protect All-In-One Smart Sensor — Motion & Environmental (UP-Sense) The UniFi Protect All-In-One Smart Sensor (UP-Sense) is a compact, battery-powered multi-sensor that brings motion, entry, environmental, and safety monitoring into your UniFi Protect ecosystem over Bluetooth. A single device detects motion, door/window open-close, temperature, humidity, ambient light, garage-door tilt, alarm sounds, and water leaks — making it the ideal "swiss army knife" for smart home and business automation anywhere in Australia. Available as a Single Unit (UP-Sense) or a 3-Pack (UP-Sense-3) with water-leak adapters, with genuine Ubiquiti stock and fast Australia-wide shipping. Sensing 8-in-1 Multi-Sensor Power CR123A Battery Connectivity Bluetooth 5.0 BLE Platform UniFi Protect Why Choose the UP-Sense Smart Sensor? 8-in-1 Multi-Sensor One compact device combines a motion (PIR), magnetic entry, accelerometer, temperature, humidity, ambient light, alarm-sound, and water sensor — replacing a drawer full of single-purpose devices. Motion & Entry Detection A passive-infrared motion sensor plus a magnetic entry sensor track presence and the open/closed status of doors and windows for security and automation triggers. Environmental Monitoring Precision temperature and humidity sensors deliver real-time readings, while the ambient light sensor lets you automate lighting based on room brightness. Garage & Safety Awareness An integrated accelerometer detects garage-door tilt and position, and the alarm-sound sensor recognises standard smoke and CO detector patterns for added safety alerts. Leak Detection (3-Pack) The included water sensor adapter (3-Pack only) detects water presence at floor level — ideal for protecting against leaks under sinks, near hot-water systems, and in laundries. UniFi Protect — No Subscription Manage sensors, alerts, and automations through the UniFi Protect app or web interface — local control with no monthly fees, paired to a Bluetooth-enabled UniFi access point. Easy Battery-Powered Install Wireless over Bluetooth 5.0 and powered by an included CR123A lithium battery, with adhesive flat and corner mounts plus a magnet — no wiring or drilling required. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UP-Sense (Single Unit) / UP-Sense-3 (3-Pack) Sensors Motion (PIR), magnetic entry, accelerometer, temperature, humidity, ambient light, alarm sound, water Connectivity Bluetooth 5.0 (BLE) Antenna (1) 2.4 GHz Power CR123A lithium battery (included) LEDs Red / Blue / White Buttons (1) Factory reset Enclosure Polycarbonate Mounting Flat wall mount & corner mount (polycarbonate, adhesive) + magnet Additional Gear Water sensor adapter (3-Pack only) Dimensions ⌀24 × 83.5 mm (⌀0.9 × 3.3″) Weight 50.2 g (1.8 oz) Operating Temperature 0°C to 45°C (32°F to 113°F) Operating Humidity 10–90% non-condensing Management UniFi Protect (web & iOS / Android app) Requirements Bluetooth-supported UniFi access point or SuperLink (indoor) Certifications FCC, IC, CE, Anatel Compliance NDAA compliant Downloads & Resources UP-Sense Tech Specs UP-Sense Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $122.99 - $322.99

• 

  Ubiquiti Ubiquiti UniFi 24 port Managed Gigabit Switch - 24x Gigabit Ethernet Ports, with 2xSFP - Touch Display - Fanless - GEN2

   

  The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen, compact size, and fanless design. The touchscreen displays the current switch state and information for quick diagnosis. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24 switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operating mode (switching, mirroring, or aggregate) per port.Features: (24) Gigabit Ethernet Ports (2) Gigabit SFP Ports 1.3" color touchscreen for status information Managed by UniFi Network Controller Product Specifications USW-24 Dimensions 442.4 x 200 x 43.7 mm (17.42 x 7.87 x 1.72") Weight With Rackmount Brackets 2.70 kg (5.95 lb) 2.79 kg (6.15 lb) Interfaces 0 Interfaces Networking Management (24) 10/100/1000 RJ45 Ports (2) 1G SFP Ethernet Ports Ethernet In-Band Power Method 100-240VAC, 50/60 Hz, Universal Input Power Supply AC/DC, Internal, 36W Supported Voltage Range 100 to 240VAC Max. Power Consumption 25W LEDs RJ45 Data Ports SFP Data Ports Speed/Link/Activity Link/Activity ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 45° C (23 to 113° F) Operating Humidity 10 to 90% Noncondensing Certifications CE, FCC, IC

  Read more less

   

  $446.60

• Save -$8.45

  Ubiquiti Ubiquiti UVC-G4-IRExtender IR Range Extender for UniFi Protect G4 Bullet

   

  Genuine Ubiquiti IR Extender — NDAA Compliant Extend Your Night Vision Further The Ubiquiti UVC-G4-IRExtender is a long-range infrared LED accessory that boosts the night-vision reach of your UniFi Protect G4 Bullet Camera by up to 25 m (82 ft). Powered and controlled directly by the camera, it adds extra IR coverage with no separate power supply and no extra wiring. Weather resistant for outdoor installs, it is a simple, plug-and-play upgrade for darker sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Extended IR Range Boosts infrared coverage up to 25 m (82 ft) for clearer, longer-reaching night vision. Camera-Powered Powered and controlled directly by the UniFi camera — no extra power supply or wiring required. Weather Resistant Built to perform reliably in outdoor installations alongside your G4 Bullet camera. Plug-and-Play A simple long-range IR LED add-on for the UniFi Protect G4 Bullet and UniFi Video Camera G3. Technical Specifications Model UVC-G4-IRExtender Category IR Range Extender IR Range Up to 25 m (82 ft) Power Method Powered & controlled by camera Weather Resistance Yes — outdoor rated Compatible With UniFi Protect G4 Bullet (UVC-G4-BULLET), UniFi Video Camera G3 (UVC-G3) Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $143.75 $135.30

• 

  Ubiquiti Ubiquiti UniFi FlexHD Ceiling Mount 3-Pack (FlexHD-CM-3) — Recessed Drop-Ceiling Bracket

   

  UniFi — NDAA Compliant Ubiquiti UniFi FlexHD Ceiling Mount 3-Pack (FlexHD-CM-3) — Recessed Drop-Ceiling Bracket The FlexHD-CM-3 is a 3-pack of recessed ceiling mounts for the UniFi FlexHD (UAP-FlexHD) access point, letting you install the AP flush into a drop-ceiling tile, drywall, or solid ceiling for a discreet, low-profile finish. A sliding retainer with locking threads and a guided snap-in mechanism makes mounting simple, while a magnetic face plate hides the bracket for a clean look. Genuine Ubiquiti stock with fast Australia-wide shipping. Low-Profile Recessed Mount Just 2″ (51 mm) deep for a discreet, flush ceiling installation that keeps the UAP-FlexHD out of sight. Tool-Free Sliding Retainer An adjustable, sliding retainer with locking threads secures the AP without screws, plus a guided snap-in locking mechanism for the UAP-FlexHD. Magnetic Face Plate A 3⅓″ (85 mm) magnetic face plate hides the bracket for a stylish, finished appearance. Includes Mounting Hardware Ships with drywall mounting hardware and anchors; requires a 2⅛″ (54 mm) cutout. NDAA Section 889 compliant. Model FlexHD-CM-3 (3-pack) Compatibility UniFi FlexHD (UAP-FlexHD) Mount Type Recessed ceiling — drop-ceiling tile, drywall, or solid ceiling Depth 2″ (51 mm) Face Plate Magnetic, 3⅓″ (85 mm) Required Cutout 2⅛″ (54 mm) Retention Adjustable sliding retainer with locking threads; snap-in locking mechanism Included Hardware Drywall mounting hardware and anchors Quantity 3 mounts per pack Compliance NDAA compliant FlexHD-CM Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $92.40

• Save -$75.00

  Ubiquiti Ubiquiti UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR (RAID 1/5/10, 10G SFP+, Touchscreen)

   

  UniFi Protect — NDAA Compliant UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ (UNVR-Pro) The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Up to 60 Days Retention Install up to seven 2.5″ or 3.5″ SATA drives for massive local storage capacity — enough for up to 60 days of continuous footage from 20 × 4K cameras or 60 × Full HD cameras. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Up to 60 days (configuration dependent) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis Compliance NDAA compliant Downloads & Resources UNVR Pro Datasheet Installation Guide What's in the Box UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. Rack Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Best For Large Commercial & Enterprise Sites Factories, warehouses, and logistics hubs needing enterprise-grade recording capacity with RAID redundancy. Schools, Universities & Campuses Multi-building campuses where long retention, high camera counts, and reliable RAID storage are non-negotiable. Office Towers & Strata Complexes High-rise offices and strata complexes with server-room infrastructure and large camera deployments. Maximum-Scale UniFi Protect Systems The top-tier UniFi Protect NVR for deployments needing maximum storage, RAID protection, and enterprise uplink speeds. Mounts in any standard 2U rack space — server rooms, comms cabinets, and data centres. Pair with a UniFi PoE switch to power and manage cameras from a single pane of glass. Use surveillance-grade SATA drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording. Add a USP-RPS Power Backup for power redundancy on critical installs. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives such as WD Purple Pro or Seagate SkyHawk AI. Check Ubiquiti's HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What's the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Is the UNVR Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UNVR Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Relevant Add-ons & Accessories UniFi Protect ViewPort PoE HDMI Adapter Display the UNVR Pro's UniFi Protect camera feeds on an HDMI monitor or television. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,244.00 $1,169.00

• 

  Ubiquiti Ubiquiti UACC-Retrofit-PSU-12V — UniFi Retrofit PSU 12V Door Access Power Supply (SLA Battery Backup)

   

  UniFi Door Access — NDAA Compliant UACC-Retrofit-PSU-12V — Genuine Australian Ubiquiti Stock & Battery-Backup Ready The Ubiquiti UniFi Retrofit PSU 12V (UACC-Retrofit-PSU-12V) is a dedicated 12V DC power supply for the UniFi Retrofit Hub, purpose-built to power your door-access hardware and keep it running through a mains outage. It delivers a clean 12V DC, 5A output, charges an optional 12V SLA backup battery, and reports health through three status LEDs — all in a compact metal chassis that mounts neatly beside the hub. NDAA Section 889 compliant, CE/FCC/IC certified, with genuine Australian stock and fast Australia-wide shipping. Clean 12V / 5A Output Supplies a stable 12V DC at 5A to the UniFi Retrofit Hub, with up to 80W max power draw and 85% efficiency for reliable, everyday door-access power. SLA Battery Backup Ready A dedicated DC in/out port charges an optional 12V SLA battery at 0.5A, so entry doors and readers keep working during a power failure. Battery sold separately. Simple 3-Wire Install One AC input, one DC output to the Retrofit Hub, and one DC in/out for the battery — plus three status LEDs for at-a-glance health and quick troubleshooting. NDAA Compliant & Locally Backed Genuine Ubiquiti hardware, NDAA Section 889 compliant and CE/FCC/IC certified — ready for government, defence and security-sensitive sites, with expert AU support. Technical Specifications Model UACC-Retrofit-PSU-12V (UniFi Retrofit PSU 12V) Function 12V DC power supply for the UniFi Retrofit Hub, with optional SLA battery backup Compatibility UniFi Retrofit Hub Power Method 100–240V AC, 50/60 Hz • 12V SLA battery Output Rating 12V DC, 5A Max. Power Consumption 80 W Efficiency 85% SLA Backup Battery 12V • charging current 0.5A (battery sold separately) Wiring Connections (1) AC input • (1) DC output (for Retrofit Hub) • (1) DC input/output (for battery) LEDs (3) Status Dimensions 127 × 76 × 35 mm Weight 350 g Operating Temperature −10 to 40°C Storage Temperature −40 to 70°C Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Frequently Asked Questions What does the UniFi Retrofit PSU 12V do? It is a dedicated 12V DC power supply for the UniFi Retrofit Hub. It powers the hub from mains AC and can charge and switch to an optional 12V SLA battery so your door access keeps running during a power outage. Which devices is it compatible with? It is designed to power the UniFi Retrofit Hub, the module that brings existing (third-party) access-control door hardware into UniFi Access. Does it support battery backup? Yes. A dedicated DC input/output port charges a 12V SLA battery at 0.5A and provides seamless backup power if mains AC is lost. Is the backup battery included? No — the 12V SLA battery is sold separately, so you can size runtime to your site. Choose a battery capacity (Ah) to suit how long you need doors to stay powered during an outage. What is the output rating? 12V DC at 5A, with a maximum power consumption of 80W and 85% efficiency. What input voltage does it accept? Universal 100–240V AC at 50/60 Hz, so it works on Australian mains without a separate adapter. How do I know it is working? Three status LEDs indicate AC input, DC output and battery status for quick, at-a-glance confirmation and troubleshooting during install. Is it NDAA compliant? Yes. The UACC-Retrofit-PSU-12V is NDAA Section 889 compliant and CE/FCC/IC certified, suitable for government, defence and security-sensitive installations. Downloads & Resources UACC-Retrofit-PSU-12V Datasheet Ubiquiti Retrofit PSU Quick Start Guide Powers the UniFi Retrofit Hub from 100–240V AC mains; mount the PSU close to the hub. For backup, connect a 12V SLA battery to the DC in/out port — the PSU charges it at 0.5A and switches over automatically on mains failure. Use the three status LEDs to confirm AC input, DC output and battery health during commissioning. Follow the Ubiquiti installation guide for wiring, mounting and battery-safety guidance. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $189.00

• 

  Ubiquiti Ubiquiti U6-Mesh-Pro UniFi Access Point 6 Mesh Pro

   

  Ubiquiti UniFi Network · NDAA COMPLIANT High-Capacity Outdoor WiFi 6 Access Point with Super-Gain Antenna Engineered for expansive outdoor environments, sports stadiums, open-air venues, and enterprise campuses, the Ubiquiti U6-Mesh-Pro is a high-performance, outdoor-rated WiFi 6 mesh access point. Built with an integrated high-gain antenna system, it delivers extended wireless coverage range and high multi-user client density, providing robust dual-band WiFi 6 performance managed centrally via UniFi Network. Wireless Tech Dual-Band WiFi 6 Antenna System Super-Gain Long Range Weather Rating IPX5 Weatherproof Compliance NDAA Compliant Seamless Wireless Meshing & All-Weather Reliability The U6-Mesh-Pro is specifically constructed to withstand challenging outdoor elements, featuring an IPX5-rated weather-resistant enclosure. Equipped with dual Gigabit Ethernet ports with PoE input and passthrough, it allows flexible wall, pole, or mast mounting, seamlessly meshing with adjacent access points to extend wireless signals without running dedicated cable lines to every node. High-Capacity WiFi 6 Throughput Supports OFDMA and 4x4 MU-MIMO technology to maintain optimal wireless performance across hundreds of connected client devices simultaneously. License-Free UniFi Controller Integration Configure SSID isolation, guest portals, captive networks, and RF channel maps effortlessly with no subscription fees using UniFi Network. Technical Specification Matrix Model U6-Mesh-Pro Wi-Fi Standards WiFi 6 (802.11ax) / WiFi 5 (802.11ac) Operating Bands 2.4 GHz & 5 GHz Dual-Band High-Gain Arrays Network Interfaces (2) Gigabit Ethernet Ports (PoE Input & Passthrough) Power Method Power over Ethernet (802.3at PoE+ Required) Enclosure Protection IPX5 Weatherproof Rated Enclosure Mounting Hardware Wall and Pole Mount Kit Included Management Platform UniFi Network Application Suite Compliance NDAA Compliant Is the U6-Mesh-Pro suitable for outdoor rain and weather exposure? Yes, the U6-Mesh-Pro features an IPX5-rated weatherproof casing designed specifically for full outdoor installation. Does the U6-Mesh-Pro require an Ethernet cable for uplink? While a wired connection delivers maximum speed, it can also connect wirelessly via UniFi Mesh backhaul to nearby UniFi access points. Is the Ubiquiti U6-Mesh-Pro NDAA compliant? Yes, the U6-Mesh-Pro is fully NDAA compliant and ready for government, corporate, and commercial deployments. What mounting hardware is included with the U6-Mesh-Pro? The package includes heavy-duty mounting hardware for both flat wall and round pole/mast installations. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $427.90

• 

  Ubiquiti Ubiquiti USW-Pro-HD-24 UniFi Switch Pro HD 24

   

  Ubiquiti UniFi Network · NDAA COMPLIANT 24-Port Managed Layer 3 Enterprise Switch with 10G SFP+ Uplinks Engineered for corporate networks, high-density office environments, and edge aggregation, the Ubiquiti USW-Pro-HD-24 is a 24-port managed Layer 3 switch. Featuring high-throughput Ethernet interfaces paired with 10G SFP+ optical uplinks, this switch delivers seamless data switching, near-zero latency, and advanced inter-VLAN routing managed centrally through the UniFi Network software suite. Port Density 24x Ethernet Interfaces Optical Uplinks 10G SFP+ Ports Power Redundancy USP-RPS DC Input Compliance NDAA Compliant Layer 3 Routing Architecture & Silent Thermal Management The USW-Pro-HD-24 integrates hardware-accelerated Layer 3 switching capabilities, including static routing, inter-VLAN routing, and DHCP server functionality to significantly reduce main router traffic overhead. Designed with near-silent thermal cooling and equipped with a UniFi Smart Power RPS (USP-RPS) backup power interface, it guarantees continuous operation and uptime for mission-critical enterprise environments. High-Throughput 10G SFP+ Optical Uplinks Connect directly to core fiber backbones or upstream switches at 10 Gbps without encountering bandwidth choke points. 1.3" Color Touchscreen Display with UniFi AR Provides visual port identification, network diagnostic telemetry, and system status directly on the front panel of the switch chassis. Technical Specification Matrix Model USW-Pro-HD-24 Networking Interfaces (24) RJ45 Ports, (2) 10G SFP+ Optical Uplink Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management System UniFi Network Controller Application Compliance NDAA Compliant Does the USW-Pro-HD-24 support Layer 3 switching features? Yes, it supports hardware-level Layer 3 routing features such as static routing and inter-VLAN routing natively. Can I connect this switch to a redundant power supply? Yes, it includes a dedicated USP-RPS port to connect with a UniFi Smart Power RPS for instant DC power failover protection. Is the Ubiquiti USW-Pro-HD-24 NDAA compliant? Yes, the USW-Pro-HD-24 is fully NDAA compliant, making it suitable for corporate, government, and enterprise deployment. Are the SFP+ slots compatible with standard 1G SFP transceivers? Yes, the 10G SFP+ uplink ports auto-negotiate and are fully backwards compatible with standard 1G SFP modules. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,284.80

• 

  Ubiquiti Ubiquiti U7-IW UniFi Access Point 7 In-Wall

   

  Ubiquiti UniFi Network · NDAA COMPLIANT In-Wall WiFi 7 Access Point with Built-In Multi-Gigabit Switch Designed for seamless in-wall installation in hotel rooms, corporate offices, multi-dwelling units, and high-density environments, the Ubiquiti U7-IW is a sleek, low-profile WiFi 7 access point. Powered by next-generation Multi-Link Operation (MLO) technology across 2.4 GHz, 5 GHz, and 6 GHz bands, it delivers multi-gigabit wireless performance directly from standard wall outlets while providing local wired connectivity via its integrated Ethernet switch. Wireless Tech WiFi 7 (802.11be) Multi-Band Uplink Interface 2.5GbE PoE Input Local Connectivity Integrated Ethernet Switch Compliance NDAA Compliant Multi-Gigabit Backhaul & Flush Wall Integration The U7-IW is engineered with a high-speed 2.5GbE rear uplink port to take full advantage of multi-gigabit switch infrastructure and prevent wireless backhaul bottlenecks. Its clean design mounts flush into standard electrical wall junction boxes, replacing traditional wall outlets with a discrete, high-density wireless hub and local wired ports for VoIP phones, smart TVs, and desktop PCs without needing additional switch hardware. Next-Gen WiFi 7 & MLO Technology Unlocks extreme wireless speeds and lower latency by allowing compatible client devices to transmit data across multiple radio bands simultaneously. Centralized UniFi Network Management Configure guest portals, VLAN tagging, power settings, and RF channel optimization effortlessly using the license-free UniFi Network application controller. Technical Specification Matrix Model U7-IW Wi-Fi Standards WiFi 7 (802.11be) / Backwards Compatible Operating Bands 2.4 GHz, 5 GHz, 6 GHz Tri-Band Performance Network Interfaces (1) 2.5GbE RJ45 Rear Uplink, Local Passthrough Switch Ports Power Method Power over Ethernet (PoE+ Required) Mounting Options Standard In-Wall Electrical Outlet Box (Bracket Included) Management System UniFi Network Controller Application Compliance NDAA Compliant How is the U7-IW installed on a wall? It mounts directly into a standard single-gang wall junction box using the provided mounting plate, replacing standard Ethernet wall faceplates. What type of PoE switch is required to power the U7-IW? The U7-IW requires a PoE+ (802.3at) switch or PoE injector for full functionality and local port operation. Is the Ubiquiti U7-IW NDAA compliant? Yes, the U7-IW is fully NDAA compliant, making it suitable for enterprise, government, and commercial network infrastructure. Does the U7-IW support 6 GHz WiFi 7 spectrum? Yes, the U7-IW incorporates full tri-band support including the 6 GHz band for low-latency WiFi 7 performance. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $335.50

• 

  Ubiquiti Ubiquiti USW-Pro-XG-24-PoE UniFi Switch Pro XG 24 PoE

   

  Ubiquiti UniFi Network · NDAA COMPLIANT High-Density 24-Port 10GbE Layer 3 PoE++ Enterprise Switch Designed to serve as a high-capacity core or aggregation switch for data-intensive networks, the Ubiquiti USW-Pro-XG-24-PoE is a fully managed Layer 3 multi-gigabit switch. Featuring 24 10GbE RJ45 ports with high-power 802.3bt PoE++ output and ultra-fast 25G SFP28 optical uplinks, this switch provides massive switching throughput, ultra-low latency, and advanced traffic routing managed centrally through the UniFi Network platform. Multi-Gigabit Density 24x 10GbE RJ45 Ports Power Delivery 802.3bt PoE++ Output High-Speed Uplinks 25G SFP28 Ports Compliance NDAA Compliant Advanced Layer 3 Routing & Redundant Power Protection The USW-Pro-XG-24-PoE delivers robust 802.3bt PoE++ capabilities across its 10GbE copper interfaces, capable of powering high-capacity WiFi 7 access points, enterprise PTZ cameras, and desktop workstations. Equipped with comprehensive Layer 3 management capabilities—including inter-VLAN routing, static routing, and DHCP server support—it offloads routing overhead from primary firewalls. To guarantee continuous uptime, it includes a UniFi Smart Power RPS (USP-RPS) port for seamless DC power backup. Auto-Sensing 10GbE Multi-Gigabit Performance Supports 100M/1G/2.5G/5G/10G speed auto-negotiation across all 24 RJ45 ports to eliminate bandwidth bottlenecks for multi-gigabit devices. 1.3" Color LCM Touchscreen Display Features an integrated touchscreen supporting UniFi AR overlay for visual port inspection, real-time power distribution tracking, and quick system status updates. Technical Specification Matrix Model USW-Pro-XG-24-PoE Networking Interfaces (24) 10GbE RJ45 Ports, (2) 25G SFP28 Uplink Ports PoE Capability (24) 802.3at/bt PoE+ / PoE++ Output Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management Software UniFi Network Controller Application Compliance NDAA Compliant Do all 24 RJ45 ports support 10GbE speeds and PoE++? Yes, all 24 ports feature multi-gigabit speeds up to 10GbE with 802.3bt PoE++ power delivery support. Are the SFP28 uplink ports backwards compatible with 10G SFP+ modules? Yes, the 25G SFP28 slots are backwards compatible with standard 10G SFP+ and 1G SFP transceivers or DAC cables. Is the Ubiquiti USW-Pro-XG-24-PoE NDAA compliant? Yes, the USW-Pro-XG-24-PoE is fully NDAA compliant, making it suitable for enterprise, government, and institutional infrastructure. Can I connect this switch to a redundant power system? Yes, it features a USP-RPS port that pairs with a UniFi Smart Power RPS to provide instant failover protection if primary AC power is lost. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $3,702.60

• 

  Ubiquiti Ubiquiti USW-Pro-XG-8-PoE UniFi Switch Pro XG 8 PoE

   

  Ubiquiti UniFi Network · NDAA COMPLIANT High-Capacity 10GbE Multi-Gigabit Layer 3 PoE++ Switch Engineered for bandwidth-heavy enterprise networks, high-density WiFi 7 access point deployments, and high-performance server connectivity, the Ubiquiti USW-Pro-XG-8-PoE is a managed 10GbE Layer 3 switch. Featuring multi-gigabit RJ45 ports with high-power PoE++ output and 10G SFP+ optical uplinks, this compact switch delivers high switching throughput, near-zero network latency, and advanced traffic routing capabilities managed centrally via UniFi Network. Multi-Gigabit Ports 10GbE RJ45 Interfaces Power Delivery 802.3bt PoE++ Output Optical Uplinks 10G SFP+ Slots Compliance NDAA Compliant Layer 3 Switching & Smart Power Redundancy The USW-Pro-XG-8-PoE provides 802.3bt PoE++ output across its 10GbE RJ45 ports, supplying up to 60W per port to drive power-hungry devices such as enterprise PTZ cameras, high-performance access points, and POS terminals. Equipped with advanced Layer 3 routing features—including inter-VLAN routing, static routing, and DHCP server functionality—it reduces router traffic bottlenecks. For maximum uptime, it includes a UniFi Smart Power RPS (USP-RPS) input port for DC failover protection. 10GbE Speed Auto-Sensing Ports Supports 100M/1G/2.5G/5G/10G speed auto-negotiation to deliver optimal performance for multi-gigabit client devices without bottlenecking. 1.3" Color Touchscreen Display Features an integrated touchscreen running UniFi AR visualization to show system status, PoE power usage, and port diagnostics directly on the device. Technical Specification Matrix Model USW-Pro-XG-8-PoE Networking Interfaces (8) 10GbE RJ45 Ports, (2) 10G SFP+ Uplink Ports PoE Capability (8) 802.3at/bt PoE+ / PoE++ Output Ports Layer Features Layer 3 Managed Switching Features Power Input Universal AC Input / USP-RPS DC Backup Input Port Display Screen 1.3" LCM Color Touchscreen Screen Form Factor 1U Rackmountable (Mounting Hardware Included) Management Software UniFi Network Controller Application Compliance NDAA Compliant Do all RJ45 ports on the USW-Pro-XG-8-PoE support 10GbE speeds? Yes, all 8 RJ45 ports support auto-sensing multi-gigabit speeds up to 10GbE (100M/1G/2.5G/5G/10G). Does this switch support PoE++ power output? Yes, the switch provides 802.3bt PoE++ power output capable of supplying up to 60W per port to high-draw devices. Is the Ubiquiti USW-Pro-XG-8-PoE NDAA compliant? Yes, the USW-Pro-XG-8-PoE is fully NDAA compliant, making it suitable for enterprise, government, and commercial network infrastructure. Can I connect this switch to a redundant power supply? Yes, it features a USP-RPS port that connects to a UniFi Smart Power RPS for redundant DC power backup in case of AC power failure. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,111.00

• 

  Ubiquiti Ubiquiti UDR-5G-Max UniFi Dream Router 5G Max

   

  Ubiquiti UniFi Network · NDAA COMPLIANT All-In-One 5G Cellular & WiFi 7 Enterprise Cloud Gateway Engineered for high-speed primary connectivity, seamless failover, and remote branch deployments, the Ubiquiti UDR-5G-Max is an all-in-one desktop UniFi Cloud Gateway. Combining an integrated multi-gigabit 5G cellular modem with next-generation WiFi 7 wireless technology, robust firewall routing, and full UniFi application hosting, this compact unit delivers high-performance enterprise networking without complex multi-device setups. Cellular & WiFi High-Speed 5G + WiFi 7 Networking Ports Multi-Gigabit WAN / LAN Security Engine Advanced IPS/IDS Firewall Compliance NDAA Compliant Multi-WAN Failover & Centralized UniFi OS Management The UDR-5G-Max is equipped with high-speed Ethernet ports supporting multi-gigabit uplinks alongside its integrated 5G NR modem, allowing for automatic WAN failover or load balancing to guarantee maximum uptime. Running UniFi OS natively, it provides centralized control over local UniFi switches, access points, and security policies—all managed through a single, subscription-free interface with real-time status updates shown on its built-in touch display. Integrated Multi-Gigabit 5G Cellular Modem Provides ultra-low-latency 5G wireless broadband connection for primary remote office internet or instant automatic cellular failover during fiber outages. Built-In WiFi 7 Access Point Delivers high-capacity multi-band wireless coverage directly from the desktop gateway unit to support high-density wireless client environments. Technical Specification Matrix Model UDR-5G-Max Cellular Connectivity 5G Sub-6 GHz / Fallback to LTE Category 20+ Wi-Fi Standards WiFi 7 (802.11be) / Backwards Compatible Ethernet Interfaces Multi-Gigabit WAN/LAN RJ45 Ports Security Features Next-Gen Threat Inspection, IPS/IDS, WireGuard VPN Display Screen Integrated Color LCM Touch Status Display Form Factor Desktop Cylindrical Design Operating System UniFi OS (Runs UniFi Applications Natively) Compliance NDAA Compliant Can the UDR-5G-Max be used as a standalone internet gateway? Yes, with its integrated 5G modem, WAN router, firewall, and built-in WiFi 7 access point, it functions as a complete all-in-one gateway solution. Does the UDR-5G-Max support automatic cellular failover? Yes, it can be configured to use wired Ethernet as the primary WAN link and automatically switch to 5G cellular if the wired ISP disconnects. Is the Ubiquiti UDR-5G-Max NDAA compliant? Yes, the UDR-5G-Max is fully NDAA compliant, making it suitable for enterprise, government, and commercial network deployments. Do I need a separate Cloud Key to manage the UDR-5G-Max? No, the UDR-5G-Max runs UniFi OS natively, serving as its own cloud gateway and application controller. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,050.50

• 

  Ubiquiti Ubiquiti UVC-AI-PTZ UniFi Protect AI PTZ Camera

   

  Ubiquiti UniFi Protect · NDAA COMPLIANT Ubiquiti 4K AI PTZ Enterprise 4K Pan-Tilt-Zoom Camera with AI Object Tracking Engineered for large-scale perimeter defense, critical infrastructure, and high-density commercial surveillance, the Ubiquiti UVC-AI-PTZ is a high-performance 4K pan-tilt-zoom security camera available in standard White and sleek Black finishes. Combining ultra-fast pan/tilt mechanics with high-magnification optical zoom, this advanced IP camera utilizes onboard AI processing to automatically detect, track, and lock onto people and vehicles across vast open areas. Video Quality 4K Ultra HD Resolution Zoom Capacity High-Magnification Optical Zoom Night Vision Long-Range IR LEDs Compliance NDAA Compliant Long-Range Night Vision & Weather-Resistant Construction The UVC-AI-PTZ features long-range adaptive infrared LEDs to deliver clear night vision video in complete darkness. Encased in a weather-resistant IP66-rated metal housing designed to withstand extreme temperatures, wind, and rain, it connects directly via PoE+ for single-cable power and network transmission, integrated seamlessly into the UniFi Protect software ecosystem without software license fees. Autonomous AI Object Detection & Tracking Tracks moving subjects across expansive outdoor spaces automatically, maintaining precise focus on targets without manual operator joystick controls. High-Speed Pan/Tilt Motor Control Precision-geared positioning motors enable fluid pan and tilt movements to quickly sweep wide areas and lock onto designated preset angles. Technical Specification Matrix Model UVC-AI-PTZ Available Colors White / Black Finish Options Video Resolution 4K Ultra HD (3840 x 2160) Optical Zoom High-Magnification Optical Precision Lens Pan / Tilt Range Continuous 360° Pan / High-Angle Tilt Control Night Vision Integrated High-Power IR LED Illuminator Power Method Power over Ethernet (PoE+) Enclosure Rating IP66 Weatherproof / Vandal-Resistant Metal Housing Management System UniFi Protect Video Management Application Compliance NDAA Compliant Does the UVC-AI-PTZ come in different color options? Yes, the camera is available in both classic UniFi White and sleek Black finish variants to match different building exteriors and aesthetics. Does the camera require a dedicated power adapter? No, the UVC-AI-PTZ is powered via a single Ethernet cable using standard PoE+ switches or PoE injectors. Is the Ubiquiti UVC-AI-PTZ NDAA compliant? Yes, the UVC-AI-PTZ is fully NDAA compliant, making it suitable for enterprise, government, and high-security facility deployments. Can I view live PTZ controls and AI tracking on mobile devices? Yes, live feeds, PTZ controls, and AI event alerts are fully supported in the UniFi Protect mobile app on iOS and Android. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $2,651.00 - $2,692.80

• 

  Ubiquiti Ubiquiti UNAS-Pro-4 UniFi Network Attached Storage Pro 4

   

  Ubiquiti UniFi Storage · NDAA COMPLIANT Compact 4-Bay Enterprise Network Attached Storage Engineered for high-reliability data backups, media archives, and centralized network file management, the Ubiquiti UNAS-Pro-4 is a 1U 4-bay rackmount network attached storage solution. Seamlessly managed within the UniFi OS ecosystem, this compact enterprise NAS delivers high-throughput 10G optical uplinks, toolless drive installation, and redundant power options for small-to-medium business networks. Drive Capacity 4x 2.5"/3.5" Drive Bays High-Speed Uplink 10G SFP+ Networking Power Redundancy USP-RPS DC Backup Compliance NDAA Compliant Multi-Gigabit Performance & Hardware Protection The UNAS-Pro-4 features four hot-swappable drive trays that accept standard 3.5-inch hard drives or 2.5-inch solid-state drives for customized RAID configurations. Equipped with a 10G SFP+ optical port for rapid data transfers and a GbE RJ45 interface for secondary connectivity, it includes a UniFi Smart Power RPS (USP-RPS) input to protect active operations against AC power loss. Toolless Hot-Swappable 4-Bay Drive Design Allows rapid installation and replacement of HDDs or SSDs without system power-downs, keeping critical storage shares accessible. Centralized UniFi OS Control Manage volume health, user access privileges, data sharing policies, and backup scheduling using standard UniFi Drive software. Technical Specification Matrix Model UNAS-Pro-4 Drive Bays (4) 2.5" / 3.5" Hot-Swappable SATA Bays Networking Uplink (1) 10G SFP+ Optical Port, (1) Gigabit Ethernet Port Power Supply AC Input Universal Inlet / USP-RPS DC Backup Input Display & Status 1.3" Touchscreen Display / Individual Bay LEDs Form Factor 1U Rackmountable (Rackmount Hardware Included) Management Software UniFi Drive / UniFi OS Application Suite Compliance NDAA Compliant Can I use 2.5" SSDs in the UNAS-Pro-4? Yes, all four drive bays support standard 3.5-inch hard drives and 2.5-inch solid-state drives using compatible drive adapters. Does the UNAS-Pro-4 support power failover redundancy? Yes, it includes a USP-RPS port to provide instant failover protection if primary AC power drops. Is the Ubiquiti UNAS-Pro-4 NDAA compliant? Yes, the UNAS-Pro-4 is fully NDAA compliant and ready for corporate, enterprise, and public sector deployment. What size rack space does the UNAS-Pro-4 occupy? The UNAS-Pro-4 features a standard 1U rackmount form factor for easy installation in standard 19-inch network cabinets. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,131.90

• 

  Ubiquiti Ubiquiti UACC-SSD-Tray UniFi Drive Caddy Adapter Tray

   

  Ubiquiti UniFi Accessories · NDAA COMPLIANT Toolless 2.5-Inch SSD Adapter Tray for UniFi Drive Bays Designed for seamless integration into UniFi storage arrays and NVR systems, the Ubiquiti UACC-SSD-Tray is a precision-engineered drive adapter tray that enables secure installation of 2.5-inch solid-state drives into standard 3.5-inch HDD drive bays. Built to ensure optimal drive alignment and stable thermal dissipation, this tray allows network administrators to upgrade UniFi Network Attached Storage (UNAS) and UniFi Protect NVR hardware with high-speed SSD media. Form Factor 2.5" to 3.5" Conversion Installation Toolless Drive Fitment Build Quality Durable Construction Compliance NDAA Compliant Precision Compatibility for UniFi Storage Hardware The UACC-SSD-Tray is tailored to fit UniFi Network Attached Storage units, Network Video Recorders (UNVR/UNVR-Pro), and Cloud Key Enterprise equipment. By converting 2.5-inch SATA SSDs into standard 3.5-inch drive bay footprints, it ensures proper SATA port alignment with internal backplanes while eliminating drive rattle and vibration during continuous operation. Perfect Backplane SATA Connector Alignment Precision-molded to place 2.5" SSD connectors in the exact physical location as standard 3.5" HDDs, guaranteeing effortless drive insertion and hot-swapping. Optimized Airflow Design Engineered with open ventilation slots to maintain consistent airflow around mounted solid-state drives during heavy read/write video recording workloads. Technical Specification Matrix Model UACC-SSD-Tray Supported Drive Size 2.5-Inch SATA SSDs / HDDs Target Bay Compatibility Standard 3.5-Inch UniFi Drive Caddies & Bays Mounting Type Toolless / Screw-Mount Support System Compatibility UNAS Series, UNVR, UNVR-Pro, Enterprise Systems Material High-Strength Molded Polymer Compliance NDAA Compliant Will this tray fit into standard UniFi UNVR and UNAS drive caddies? Yes, the UACC-SSD-Tray is specifically designed to adapt 2.5-inch SSDs to fit standard 3.5-inch UniFi HDD caddies and backplanes. Do I need tools or screws to install the 2.5-inch SSD into the tray? The tray features an intuitive mounting mechanism that allows quick, secure installation of 2.5-inch solid-state drives without hassle. Is the Ubiquiti UACC-SSD-Tray NDAA compliant? Yes, the UACC-SSD-Tray is fully NDAA compliant and suitable for commercial, enterprise, and public sector deployments. Does this adapter tray work with both SSDs and 2.5-inch laptop HDDs? Yes, it supports any standard 2.5-inch SATA form-factor drive, including solid-state drives and traditional 2.5-inch mechanical hard drives. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $45.00

• 

  Ubiquiti Ubiquiti UNAS-Pro-8 UniFi Network Attached Storage Pro 8

   

  Ubiquiti UniFi Storage · NDAA COMPLIANT High-Density 8-Bay Enterprise Network Attached Storage Engineered for mission-critical backup, high-speed data archive, and centralized enterprise storage management, the Ubiquiti UNAS-Pro-8 is a high-performance 8-bay rackmount network attached storage solution. Built to integrate seamlessly into the UniFi OS ecosystem, this powerful storage array delivers high-throughput 10G optical uplinks, robust data protection configurations, and high-density drive support for modern enterprise operations. Drive Capacity 8x 2.5"/3.5" Drive Bays High-Speed Uplink 10G SFP+ Networking Power Redundancy USP-RPS DC Backup Compliance NDAA Compliant Multi-Gigabit Connectivity & High-Availability Redundancy The UNAS-Pro-8 features eight toolless hot-swappable HDD/SSD drive bays supporting both 2.5-inch and 3.5-inch storage media for customizable storage volumes. Armed with a 10G SFP+ port for ultra-fast data transfers and a secondary 1GbE/2.5GbE RJ45 interface for management redundancy, it guards against data loss and hardware downtime. The system includes USP-RPS power redundancy input, ensuring uninterrupted storage uptime during primary power fluctuations. Hot-Swappable 8-Bay Drive Architecture Supports fast replacement and expansion of 3.5" HDDs or 2.5" SSDs without shutting down storage services or interrupting active user connections. Seamless UniFi Ecosystem Integration Easily managed via standard UniFi management software with automated backup jobs, volume health tracking, and intuitive user access control permissions. Technical Specification Matrix Model UNAS-Pro-8 Drive Bays (8) 2.5" / 3.5" Hot-Swappable SATA Bays Networking Uplink (1) 10G SFP+ Optical Port, (1) Gigabit Ethernet Port Power Supply AC Input Universal Inlet / USP-RPS DC Backup Input Display & Status LCM Status Display Screen / Individual Bay LEDs Form Factor 2U Rackmountable (Rackmount Bracket Assembly Included) Management Software UniFi Drive / UniFi OS Application Suite Compliance NDAA Compliant Does the UNAS-Pro-8 support both 2.5" SSDs and 3.5" HDDs? Yes, all eight hot-swappable drive caddies are designed to accommodate standard 3.5-inch hard drives as well as high-speed 2.5-inch solid-state drives. Can I use redundant power supplies with this storage array? Yes, the UNAS-Pro-8 includes a UniFi Smart Power RPS (USP-RPS) port for failover power backup in case the primary internal AC power fails. Is the Ubiquiti UNAS-Pro-8 NDAA compliant? Yes, the UNAS-Pro-8 is fully NDAA compliant, making it suitable for corporate, enterprise, and public sector deployment. How do I connect the UNAS-Pro-8 to my high-speed network? The unit features a dedicated 10G SFP+ optical uplink port for high-bandwidth server connections alongside an RJ45 Ethernet port for network access. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,683.00

• 

  Ubiquiti Ubiquiti U7-Pro-XG-Wall UniFi Access Point 7 Pro XG Wall

   

  Ubiquiti UniFi Network · NDAA COMPLIANT Ultra-High-Density In-Wall WiFi 7 Enterprise Access Point Engineered for seamless wall-mount integration in high-density enterprise environments, luxury hospitality, and modern offices, the Ubiquiti U7-Pro-XG-Wall delivers next-generation WiFi 7 performance directly to end-user spaces. Operating across the 2.4 GHz, 5 GHz, and 6 GHz spectrums, this high-capacity access point provides multi-gigabit wireless throughput, low latency, and robust coverage while maintaining a clean, flush-mount aesthetic. Wireless Standard Tri-Band WiFi 7 Network Uplink Multi-Gigabit Ethernet Power Method Power over Ethernet (PoE+) Compliance NDAA Compliant High-Capacity Tri-Band Performance & Seamless Deployment The U7-Pro-XG-Wall utilizes 320 MHz channel bandwidth in the 6 GHz spectrum to bypass wireless congestion and deliver ultra-fast response times for bandwidth-intensive applications. Designed to fit standard electrical wall boxes, it features multi-gigabit Ethernet connectivity to ensure network backhaul bottlenecks are eliminated, while integrated PoE functionality allows for clean, single-cable power and data installation managed centrally via the UniFi Network application. 6 GHz Spectrum & 320 MHz Channel Support Leverages interference-free 6 GHz frequencies with ultra-wide channel bonding to achieve multi-gigabit wireless speeds for modern clients. Sleek Architectural Wall Integration Mounts cleanly over existing wall outlet boxes, providing high-density in-room wireless coverage without disruptive ceiling runs or visible cabling. Technical Specification Matrix client Isolation Model U7-Pro-XG-Wall WiFi Standards WiFi 7 (802.11be) / WiFi 6E / WiFi 6 / 802.11a/b/g/n/ac Frequency Bands 2.4 GHz, 5 GHz, 6 GHz Tri-Band Uplink Interface Multi-Gigabit RJ45 Ethernet Port Power Method 802.3at PoE+ Powered Wireless Security WPA3 Enterprise, WPA3 Personal, WPA2 Mounting Options In-Wall Outlet Box Mount / Surface Wall Mount Brackets Included Management System UniFi Network Controller Application Compliance NDAA Compliant Can the U7-Pro-XG-Wall be mounted on standard electrical gang boxes? Yes, the U7-Pro-XG-Wall includes mounting brackets designed to fit standard wall outlet boxes for flush, unobtrusive installations. Does this access point require PoE+ to operate? Yes, the access point requires an 802.3at PoE+ power source from a PoE switch or PoE injector to deliver full tri-band wireless performance. Is the Ubiquiti U7-Pro-XG-Wall NDAA compliant? Yes, the U7-Pro-XG-Wall is fully NDAA compliant, making it suitable for deployment across enterprise, government, and commercial facilities. Does the U7-Pro-XG-Wall support 6GHz WiFi 7 devices? Yes, it supports full WiFi 7 operation across 2.4 GHz, 5 GHz, and 6 GHz spectrums with up to 320 MHz channel widths for compatible client devices. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $552.20

• 

  Ubiquiti Ubiquiti UCG-Industrial UniFi Cloud Gateway Industrial

   

  Ubiquiti UniFi Network · NDAA COMPLIANT Rugged Heavy-Duty Enterprise Cloud Gateway & Firewall Engineered for mission-critical industrial applications and harsh operating environments, the Ubiquiti UCG-Industrial is a high-performance, fanless UniFi Cloud Gateway designed to deliver uncompromising network security, routing, and device management. Housed in a heavy-duty aluminum enclosure capable of withstanding extreme temperature fluctuations, this industrial gateway runs the complete UniFi application suite natively—eliminating the need for an external Cloud Key while serving as a centralized network controller. Multi-Gigabit WAN/LAN 2.5GbE / 10G SFP+ Enclosure Protection Rugged Extended Temp Power Delivery PoE Output / DC Input Compliance NDAA Compliant Multi-Gigabit Throughput & Next-Gen Security Features The UCG-Industrial combines versatile high-speed interfaces, featuring multi-gigabit 2.5GbE RJ45 ports alongside 10G SFP+ optical uplinks for maximum backbone bandwidth. Equipped with advanced threat protection, full IPS/IDS traffic inspection, multi-WAN load balancing, and integrated PoE power output capabilities to directly drive remote IP cameras or access points, this unit mounts effortlessly via standard DIN-rail or wall options inside control cabinets, utility enclosures, and remote facility rooms. Fanless Industrial Thermal Management Engineered with a heavy-duty aluminum heatsink housing that operates silently without moving parts, offering superior resilience against dust, vibration, and temperature extremes. Full UniFi Application Suite Support Runs UniFi Network natively to manage access points, switches, and security gateways, providing full remote cloud management without requiring subscription fees. Technical Specification Matrix Model UCG-Industrial Networking Interfaces (4) 2.5GbE RJ45 Ports, (1) 10G SFP+ Uplink Port PoE Interfaces Power Output Pass-Through via RJ45 Ports Power Input Methods DC Terminal Block / Universal External Power Supply Security Features IPS/IDS Threat Detection, Application Filtering, WireGuard VPN Enclosure Construction Heavy-Duty Anodized Aluminum Industrial Housing Mounting Options DIN-Rail Mount / Wall Mount Kits Included Operating System UniFi OS (Runs UniFi Network Natively) Compliance NDAA Compliant Does the UCG-Industrial require a Cloud Key to manage? No, the UCG-Industrial runs UniFi OS natively and acts as an integrated Cloud Gateway, allowing full local and remote management through the UniFi portal. Can this router handle multi-gigabit internet connections with security enabled? Yes, its powerful multi-core processing architecture provides multi-gigabit routing performance and high-speed IPS/IDS threat inspection. Is the Ubiquiti UCG-Industrial NDAA compliant? Yes, the UCG-Industrial is fully NDAA compliant, making it suitable for deployment across enterprise, infrastructure, and government facilities. What mounting hardware is included with the UCG-Industrial? The gateway includes both standard wall-mount brackets and an industrial DIN-rail kit for clean mounting inside electrical cabinets and equipment racks. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $11,517.00

• 

  Ubiquiti Ubiquiti USW-Pro-Max-24-PoE UniFi Switch Pro Max 24 PoE Layer 3 Switch

   

  Ubiquiti UniFi Network · NDAA COMPLIANT Next-Gen Etherlighting™ Multi-Gigabit Layer 3 Switching Platform Engineered to power modern high-density enterprise networks, the Ubiquiti USW-Pro-Max-24-PoE is a high-performance Layer 3 Etherlighting™ switch built for demanding WiFi 6/7 and multi-gigabit deployments. Equipped with 2.5GbE ports, PoE++ capability, and 10G SFP+ uplinks, this 24-port managed switch combines advanced network traffic management with real-time port location and speed visual indicators directly on the RJ45 jacks for streamlined cabinet maintenance. Port Configuration 16x 1GbE / 8x 2.5GbE PoE Budget / Uplinks 400W / 2x 10G SFP+ Visual Port Tech Etherlighting™ Ports Compliance NDAA Compliant High-Power PoE Flexibility & Enterprise Redundancy The USW-Pro-Max-24-PoE incorporates a massive 400-Watt PoE supply distributed across 16x 802.3at PoE+ ports and 8x 60W 802.3bt PoE++ ports. Designed to drive demanding devices like UniFi WiFi 7 APs, PTZ cameras, and IP access control hubs, it features dual 10G SFP+ uplink ports to eliminate backhaul bottlenecks. Built-in Layer 3 switching capabilities like inter-VLAN routing, static routing, and DHCP server functions handle local traffic routing efficiently, while USP-RPS DC input compatibility ensures continuous power failover protection. Etherlighting™ Port Illumination Patented illuminated RJ45 ports visually indicate port speed, VLAN tags, connection status, and cable placement directly on the patch panel using customizable color illumination. Multi-Gigabit & High-Power PoE++ Features 8 dedicated 2.5GbE ports providing high bandwidth to next-generation APs, paired with up to 60W per-port PoE++ outputs for power-hungry network appliances. Technical Specification Matrix Model USW-Pro-Max-24-PoE Networking Interfaces (16) 10/100/1000 MbE RJ45 Ports, (8) 100/1000/2500 MbE RJ45 Ports Uplink Interfaces (2) 1/10G SFP+ Ports PoE Interfaces (16) PoE+ 802.3af/at, (8) 60W PoE++ 802.3af/at/bt Total Available PoE Budget 400W Switching Capacity 112 Gbps Total Non-Blocking Throughput Power Method 100-240V AC Universal Input / USP-RPS DC Input Display & Management 1.3" LCM Color Touchscreen, UniFi Network Controller Form Factor & Rackmount 1U Rackmountable (Mounting Brackets Included) Compliance NDAA Compliant What is Ubiquiti Etherlighting™ and how does it help network admins? Etherlighting™ uses RGB LEDs embedded in each RJ45 port to display speed, VLAN assignment, or locator pulses visually, making cable tracing and troubleshooting effortless. How many multi-gigabit (2.5GbE) ports are on the USW-Pro-Max-24-PoE? It includes 8 dedicated 2.5GbE RJ45 ports designed to support multi-gigabit client devices like WiFi 6E/7 access points and high-speed NAS units without bottlenecks. Is the USW-Pro-Max-24-PoE NDAA compliant? Yes, the USW-Pro-Max-24-PoE is fully NDAA compliant and meets compliance standards required for deployment in corporate, public sector, and government environments. Does this switch support redundant power supplies? Yes, it features a rear USP-RPS DC input port that connects to a Smart Power Redundant Power System to maintain continuous operation if the internal AC power source fails. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $1,799.00

• 

  Ubiquiti Ubiquiti UVC-G5-PTZ UniFi Protect 2K HD PTZ Camera

   

  Ubiquiti UniFi Protect · NDAA COMPLIANT Ubiquiti 2K PTZ Ultra-Compact 2K HD Pan-Tilt-Zoom Surveillance for Enterprise Security Engineered to provide high-speed tactical coverage over critical commercial areas, the Ubiquiti UVC-G5-PTZ delivers crisp 2K (4MP) video performance paired with ultra-low latency pan, tilt, and zoom capabilities. Available in both Black and White options to complement modern architectural facades, this outdoor-ready camera combines powerful optical clarity with seamless integration into the UniFi Protect ecosystem for zero-subscription, enterprise-grade video management. Resolution / Optics 2K (4MP) / 2x Optical Finish Options Black & White Night Vision / Weather 20m IR / IP66 Rated Compliance NDAA Compliant Advanced Edge AI Detection & High-Speed PTZ Responsiveness The UVC-G5-PTZ features high-precision motorized controls delivering smooth, immediate pan and tilt adjustments directly through the UniFi Protect mobile app or web console. Equipped with integrated Smart AI Analytics, it intelligently detects people, vehicles, and license plates in real time to reduce false alerts. Powered by Standard PoE (802.3af), this unit encapsulates high-performance 20m (65 ft) IR night vision and an IP66 weather-resistant housing into a remarkably compact footprint. Real-Time Mechanical Response Precision servos enable high-speed manual pan-tilt tracking and preset positioning with minimal delay, allowing operators to actively monitor dynamic site environments. Edge AI Video Analytics Built-in neural processing detects subjects automatically, categorizing human and vehicle events on-device without relying on costly external cloud processing. Technical Specification Matrix Model UVC-G5-PTZ Resolution 2K HD (2688 x 1520 / 4MP) at 30 FPS Color Options Black / White Optical Zoom 2x Optical Zoom (Clear Lossless Detail) Night Vision High-Power IR LEDs with IR Cut Filter (20m / 65ft Range) Ingress Protection IP66 Weather-Resistant, IK04 Impact-Resistant Power Method PoE (802.3af Standard PoE) Networking Interface 1x 10/100 MbE RJ45 Port Compliance NDAA Compliant Is the UVC-G5-PTZ available in both Black and White finishes? Yes, the UVC-G5-PTZ is available in factory Black and White color options to complement modern dark cladding or traditional white exterior surfaces. Does the UVC-G5-PTZ require a separate power supply or injector? The camera is powered via Standard 802.3af Power over Ethernet (PoE), allowing power and data to be delivered through a single Cat5e/Cat6 cable. Is the UVC-G5-PTZ NDAA compliant? Yes, the UVC-G5-PTZ camera is fully NDAA compliant and authorized for deployment across enterprise, government, and municipal infrastructure projects. Can this camera be installed outdoors in harsh weather conditions? Yes, it features an IP66 weather-resistant rating designed to withstand direct exposure to rain, snow, dust, and outdoor temperature swings. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $639.00

• 

  Ubiquiti Ubiquiti UX7 UniFi Express 7 WiFi 7 Cloud Gateway

   

  Ubiquiti UniFi Express 7 · NDAA COMPLIANT Next-Generation Connectivity with Ubiquiti UX7 Cloud Gateway Engineered for high-density modern environments, the Ubiquiti UX7 (UniFi Express 7) redefines compact routing by combining blazing-fast 10G wire-speed performance with cutting-edge Tri-Band WiFi 7 technology. Purpose-built for small-to-medium commercial deployments, executive offices, and advanced residential networks, this mesh-scalable cloud gateway streamlines enterprise-grade management while effortlessly supporting over 300 simultaneous client devices across an expansive 160 m² (1,750 ft²) range. Wireless Standard Tri-Band WiFi 7 (802.11be) Routing Interfaces 1x 10G WAN & 1x 2.5G LAN Security Performance 2.3 Gbps IDS/IPS Throughput Ecosystem Density 30+ Devices & 300+ Users Enterprise-Grade Security & Seamless UniFi Integration Managing complex network architectures has never been simpler. The UX7 integrates deeply with the entire UniFi application suite, allowing administrators to orchestrate up to 30 additional UniFi devices—such as security cameras, switches, and access points—directly from its embedded controller interface. Equipped with an application-aware Layer 7 stateful firewall, custom content filtering, and license-free SD-WAN capabilities, it establishes a robust security perimeter. Advanced networking protocols like Site Magic, WireGuard, and OpenVPN ensure secure multi-site connectivity without recurring subscription overhead. Ultra-Fast Tri-Band WiFi 7 Performance Leveraging state-of-the-art 802.11be architecture, the UX7 spans 2.4 GHz, 5 GHz, and low-latency 6 GHz channels to deliver an aggregate wireless throughput reaching up to 10.6 Gbps. This maximizes bandwidth efficiency for data-heavy applications, immersive streaming, and high-density office environments. Advanced Threat Management & IDS/IPS Protect sensitive corporate assets with dedicated intrusion detection and prevention systems capable of processing up to 2.3 Gbps. Combined with automated ad blocking, VLAN traffic segmentation, and deep packet inspection (DPI), network operators retain total visibility and control over internal traffic. Technical Specification Matrix Model UX7 Processor & Memory Quad-core ARM Cortex-A53 at 1.5 GHz, 3 GB System Memory Networking Ports (1) 10 GbE RJ45 WAN, (1) 2.5 GbE RJ45 LAN WiFi Standards 802.11a/b/g/n/ac/ax/be (WiFi 6/6E/7) Max. Client Capacity 300+ Simultaneous Users, 30+ Managed UniFi Devices IDS/IPS Throughput 2.3 Gbps Enclosure Dimensions 117 x 117 x 42.5 mm (4.61 x 4.61 x 1.67") Compliance & Power NDAA Compliant, Powered via USB Type-C (5V DC/5A, 22W Max) What is the maximum client capacity supported by the UX7? The UniFi Express 7 is engineered to handle over 300 simultaneous active client connections while seamlessly managing up to 30 secondary UniFi network accessories. Does the UX7 require an external software controller? No, the gateway features an embedded UniFi Network application server, providing out-of-the-box management straight from your browser or the mobile app. Is this gateway compliant with government security directives? Yes, the Ubiquiti UX7 is fully NDAA compliant, satisfying stringent regulatory frameworks required for enterprise and public sector deployments. What power supply method does the unit utilize? The device is conveniently powered via an included USB Type-C power adapter supporting standard 100–240V AC ranges at a maximum consumption of 22W. Official Ubiquiti Stock NDAA Certified Aust-Wide Delivery

  Read more less

   

  $449.00

• Save -$303.25

  Ubiquiti Ubiquiti UniFi Pro XG 10 PoE 10-Port 10GbE Layer 3 Switch

   

  Professional 10GbE Layer 3 Switch Ubiquiti UniFi Pro XG 10 PoE A compact 1U powerhouse delivering ten multi-gigabit PoE+++ ports, dual 10G SFP+ uplinks and advanced Layer 3 control for demanding enterprise, surveillance and professional AV networks. Copper connectivity 10 × 10 GbE Total PoE availability 400W PoE+++ Non-blocking throughput 120 Gbps Network intelligence Layer 3 Enterprise performance without compromise Multi-gig connectivity Ten RJ45 ports support 10G, 5G, 2.5G, 1G and 100M connections, backed by two 10G SFP+ uplinks. High-power PoE+++ Power access points, PTZ cameras, AV endpoints and other demanding devices with up to 90W per copper port. Advanced traffic control Layer 3 routing, VLANs, QoS, LACP, IGMP snooping, ACLs and network isolation provide precise control. Designed for the rack A robust 1U steel enclosure, DC power backup support, Etherlighting™ and a 1.3-inch touchscreen simplify deployment. Recommended applications Enterprise networks High-speed aggregation for offices, campuses, labs and distributed infrastructure. IP surveillance Multi-gig bandwidth and high-power PoE for dense, high-resolution camera deployments. Professional AV Profiles for Dante, Q-SYS, NDI, SDVoE, Shure, AES67 and Crestron environments. WiFi 7 deployments 10GbE access ports supply the bandwidth and power required by next-generation access points. Technical specifications Connectivity & performance Model USW-Pro-XG-10-PoE (400W) RJ45 ports 10 × 10 GbE, all PoE+++ (10G/5G/2.5G/1G/100M) SFP+ ports 2 × 10G SFP+ (10G/1G) Switching capacity 240 Gbps Non-blocking throughput 120 Gbps Forwarding rate 179 Mpps Supported VLANs 1,000 MAC address table 32,000 entries IPv4 static routes 256 PoE, power & hardware Total PoE budget 400W Maximum PoE per port PoE 15.4W; PoE+ 30W; PoE++ 60W; PoE+++ 90W Power supply Internal 550W AC/DC Power input 100–240V AC, 50/60 Hz; USP RPS DC backup input Form factor 1U rack mount Dimensions 442.4 × 285 × 44 mm Weight 4.6 kg without brackets; 4.7 kg with brackets Enclosure SGCC steel Display 1.3-inch touchscreen Operating temperature −5 to 40°C Operating humidity 10–90% non-condensing Advanced switching and routing Layer 3 featuresDHCP server and relay, inter-VLAN routing and static routing for local networks. Layer 2 protectionSTP/RSTP, DHCP snooping and guarding, storm control, loop protection and rate limiting. Access control802.1X, MAC- and IP-based ACLs, device isolation, port restriction and network isolation. Optimised media trafficIGMP snooping, advanced IGMP configuration, jumbo frames, QoS and Pro AV profiles. Deployment notes Requires UniFi Network version 9.1.120 or later. SFP modules, patch leads and optional rack accessories may be sold separately. Confirm device power requirements before allocating the 400W total PoE budget. Product resources Installation guide Manufacturer product page NDAA compliant Professional-grade hardware Australian specialist support Specifications are based on manufacturer information and may change without notice.

  Read more less

   

  $1,702.25 $1,399.00

• 

  Ubiquiti Ubiquiti CloudKey Enterprise (CK-Enterprise) - Enterprise-Grade UniFi Network Console

   

  Ubiquiti Enterprise Series · NDAA COMPLIANT Enterprise-Grade Centralized UniFi Console for Large-Scale Deployments The CK-Enterprise (CloudKey Enterprise) is an ultra-high-capacity, enterprise-grade 1U rackmount console engineered to centralize and scale massive UniFi Network deployments. Capable of managing over 1,000 UniFi network devices and supporting more than 10,000 concurrent client connections, it delivers powerful multi-site administration, real-time analytics, and low-latency network telemetry. Designed for mission-critical commercial, campus, and hospitality environments, it features built-in high availability with redundant hot-swappable power supplies and high-speed 10G optical connectivity. Device Scale 1,000+ UniFi Devices Client Capacity 10,000+ Active Clients High-Speed Uplink 10G SFP+ Optical Port Power Redundancy Dual Hot-Swap PSUs Unified Multi-Site Control & License-Free Scalability Built to streamline enterprise network operations without burdensome recurring subscription costs, the CK-Enterprise provides a centralized control hub for managing global multi-site topologies from a single dashboard. Equipped with an Intel Xeon processor, enterprise SSD storage, and redundant power architecture, this console guarantees exceptional system uptime, fast configuration deployment, and smooth real-time telemetry processing across complex corporate, higher education, and ISP infrastructures. Unmatched Scale & Performance Manages over 1,000 UniFi Access Points and Switches along with 10,000+ connected client devices across thousands of unique network sites. Dual Hot-Swappable Power Supplies Includes dual redundant AC power modules to ensure continuous operation, allowing hot-swapping during live power feed maintenance. 10G SFP+ High-Speed Backhaul Features a 10Gbps SFP+ interface for ultra-fast, low-latency communication with core datacenter switches and optical backbones. Zero Subscription License Fees Provides complete control over full-featured UniFi Network application software with zero cloud host fees, recurring seat licenses, or hidden software costs. Technical Specification Matrix Model CK-Enterprise Networking Interfaces (1) 10/100/1000 Mbps RJ45 Ethernet Port(1) 1/10 Gbps SFP+ Optical Port Management Capacity 1,000+ UniFi Devices | 10,000+ Clients Processor & Memory 10-Core Intel Xeon SP v5 / 16 GB DDR4 RAM On-Board Storage 256 GB Enterprise M.2 NVMe SSD Power Supply & Redundancy (2) Hot-Swappable 550W AC Power Supplies (100–240V AC) Display & Diagnostics 1.3" LCM Color Touchscreen Display Form Factor & Dimensions 1U Rackmount | 442 x 43.7 x 482.2 mm (17.4 x 1.7 x 19") | 8.8 kg (19.4 lb) Is the Ubiquiti CloudKey Enterprise (CK-Enterprise) NDAA compliant? Yes. The Ubiquiti CloudKey Enterprise (CK-Enterprise) is explicitly NDAA compliant, making it fully approved for municipal, defense, and federal contractor infrastructure projects requiring NDAA compliance. How many UniFi devices can the CloudKey Enterprise manage? The CK-Enterprise is designed for large-scale networks, capable of managing over 1,000 UniFi devices (switches, APs, gateways) and supporting more than 10,000 active client devices across multiple physical sites. Are there recurring software or cloud management fees? No. Like all UniFi OS consoles, the CloudKey Enterprise runs the UniFi Network software locally with zero mandatory subscription, cloud licensing, or per-device maintenance fees. Does the console support redundant power? Yes. The unit comes standard with dual hot-swappable 550W AC power supply modules, protecting against internal power supply failure or power line drops. Official Ubiquiti Stock NDAA Compliant Certified Aust-Wide Delivery

  Read more less

   

  $10,617.20

Show more products