UniFi Protect Accessory Ubiquiti UniFi Protect G4 Doorbell Black Cover (UVC-G4-DB-Cover-Black) The UniFi Protect G4 Doorbell Black Cover is a genuine Ubiquiti snap-on skin that lets your UniFi Protect G4 Doorbell (UVC-G4-DoorBell) blend cleanly into dark door frames, walls, and trims. The black finish gives a discreet, low-profile look while leaving the camera, ring button, and microphone fully unobstructed. A simple cosmetic upgrade with genuine Ubiquiti stock and fast Australia-wide shipping — backed by expert AU support. Model UVC-G4-DB-Cover-Black Type Cosmetic skin / cover Colour Black Compatibility UniFi Protect G4 Doorbell (UVC-G4-DoorBell) Installation Snap-on, no tools required Brand Ubiquiti — UniFi Protect Compliance NDAA compliant Discreet Black Finish Helps the G4 Doorbell blend into dark door frames, walls, and trims for a clean, low-profile install. Genuine Ubiquiti Accessory A perfect-fit cover designed specifically for the UniFi Protect G4 Doorbell — precise cutouts keep the camera, ring button, and mic clear. Tool-Free Fit Slips over your existing G4 Doorbell in seconds — no rewiring, no tools, no remounting required. NDAA Compliant Part of the Ubiquiti UniFi Protect ecosystem, suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant Ubiquiti UniFi Access NFC Card (UA-Card) — Secure Door Access Credentials The UniFi Access Card (UA-Card) is a highly secure NFC credential for the UniFi Access door-control system. Built on MIFARE DESFire EV3 with Ubiquiti's proprietary security protocol, each card delivers fast, contactless tap-to-unlock at any UniFi Access reader — with multi-layer encryption that resists malicious duplication. Available as a 10-Pack (Black, UA-Card-B-10) or 100-Pack (White, UA-Card-W-100) for offices, multi-tenant buildings, schools, and commercial sites. Genuine Ubiquiti stock with fast shipping Australia-wide. MIFARE DESFire EV3 Security Multi-layer encryption plus the UniFi Access proprietary security protocol guards against card cloning and unauthorised duplication. Tap-to-Unlock Contactless 13.56 MHz NFC lets staff and visitors unlock doors with a simple tap at any compatible UniFi Access reader. Centrally Managed — No Licence Fees Assign, revoke, or reissue cards instantly in the UniFi Access app. Lost cards are disabled in seconds with no rekeying and no subscription fees. NDAA Compliant NDAA Section 889 compliant from US-based Ubiquiti — suitable for government and security-sensitive deployments. Technical Specifications Model UA-Card (10-Pack Black: UA-Card-B-10 / 100-Pack White: UA-Card-W-100) NFC Technology MIFARE DESFire EV3 + UniFi Access Proprietary Security Protocol NFC Frequency 13.56 MHz Compatibility UniFi Access readers, managed via the UniFi Access application Format ISO 7810 ID-1 (standard credit-card size) Dimensions 85.6 × 53.98 × 0.84 mm Weight 5 g Pack Options 10-Pack • 20-Pack • 100-Pack Compliance NDAA compliant Certifications Anatel Downloads & Resources UA-Card Datasheet UA-Card Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UVC-Doorbell-Lite PoE Video Doorbell — Australian Stock & Fast AU Shipping The Ubiquiti UniFi Doorbell Lite is a compact PoE video doorbell built for the UniFi Protect ecosystem — delivering reliable front-door visibility, crisp two-way audio and smart event detection over a single Ethernet cable, with no battery to charge. Its tall 5MP 3:4 sensor captures visitors head-to-toe, while on-device smart detections for people, vehicles and animals keep your alerts focused on what matters. Ideal for homes, offices, apartments, reception entries and small-business doors anywhere in Australia. Available in White (UVC-Doorbell-Lite-W) and Black (UVC-Doorbell-Lite-B), with genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 5MP (3:4) Audio Two-Way Night Vision IR 5 m Power Single-Cable PoE Why Choose the UniFi Doorbell Lite? Tall 5MP 3:4 View A 1/2.7″ 5MP sensor records 1920 × 2560 in a 3:4 aspect ratio at up to 24 FPS — the portrait field of view shows visitors from head to toe and captures parcels left at the door. Smart Detections On-device detection for people, vehicles and animals filters out nuisance alerts, so you only get notified about the front-door events that matter. Crystal-Clear Two-Way Audio Speak with visitors, delivery drivers or staff in real time straight from the UniFi Protect app — answer the door from anywhere. 5 m IR Night Vision Built-in IR LED illumination and an IR cut filter deliver clear footage up to 5 metres in complete darkness — day or night, you always see who is at the door. IPX5 Weather Resistant A polycarbonate-and-metal body rated IPX5 with a wide −30°C to 50°C operating range suits covered and protected entryways through Australian conditions. Single-Cable PoE Install One Ethernet cable carries both power and data (max 8 W) — no battery charging, no separate power run. Includes a flat wall mount plus a 20° angle wedge for the perfect aim. UniFi Protect — No Subscription Records locally to your UniFi Protect console or NVR with no monthly fees and full local control of live view, recordings and alerts. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installs where supply-chain integrity is required. Technical Specifications Model UVC-Doorbell-Lite (White: UVC-Doorbell-Lite-W / Black: UVC-Doorbell-Lite-B) Resolution 5 MP — 1920 × 2560 (3:4) @ up to 24 FPS Image Sensor 1/2.7″ 5 MP CMOS Lens Fixed focal length Field of View H: 95.8° • V: 131.2° • D: 175.9° Night Vision Built-in IR LED illumination + IR cut filter, up to 5 m Smart Detections People, vehicles, animals Audio Two-way audio Weatherproof Rating IPX5 Network Interface 10/100 MbE RJ45 Power Method PoE, 37–57 V DC • max 8 W Processor Dual-core Arm® Cortex®-A7 Buttons (1) Ring button • (1) Factory reset Mounting Flat wall mount & 20° wedge (included); gang box, junction box (optional) Enclosure Polycarbonate & metal Dimensions 137 × 40 × 26.4 mm Weight 142 g (device) • 165 g (flat mount) • 179 g (20° wedge) Operating Temperature −30°C to 50°C, 20–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Colours Available White (UVC-Doorbell-Lite-W) / Black (UVC-Doorbell-Lite-B) Downloads & Resources UVC-Doorbell-Lite Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Doorbell Lite Your choice of White (UVC-Doorbell-Lite-W) or Black (UVC-Doorbell-Lite-B) finish. Mounting Hardware Flat wall mount, 20° angle wedge, and fixings included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Protect host and PoE switch/injector are required and sold separately. Best For Homes & Front Doors See, hear and speak to visitors at the main entry with reliable PoE power and no battery charging. Apartments & Townhouses The compact body suits narrow door frames and tight entry walls in multi-dwelling homes. Offices & Reception Greet and screen visitors at the front desk while smart detections cut nuisance alerts. Small Business Entries Local UniFi Protect recording with no subscription — ideal alongside existing UniFi cameras. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE) running UniFi Protect. Powered by any standard PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts flat to the wall out of the box; a 20° angle wedge is included to aim along the entry. Optional gang box and junction box mounting for tidy professional installs. Frequently Asked Questions Does the Doorbell Lite require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi console or NVR. There are no monthly fees or cloud subscriptions required. What do I need to run the Doorbell Lite? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE — plus a PoE switch to power the doorbell. Is it a PoE doorbell? Yes. The Doorbell Lite is powered and connected over a single Ethernet cable via a 10/100 MbE RJ45 port — no battery to charge. What's the difference between the White and Black versions? Identical specs and performance — only the colour differs. White (UVC-Doorbell-Lite-W) suits lighter entries; Black (UVC-Doorbell-Lite-B) suits darker frames and modern doors. Is it weatherproof for outdoor use in Australia? Yes. It carries an IPX5 rating and a −30°C to 50°C operating range, suiting covered and protected entry installations. Is the Doorbell Lite NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the Doorbell Lite is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant UniFi Access Reader Lite — NFC & Bluetooth PoE Reader (UA-Lite) The UniFi Access Reader Lite (UA-Lite) is a compact, modern door reader for the UniFi Access ecosystem — combining NFC and Bluetooth credentials, a built-in security element chip for encrypted credential handling, and single-cable PoE power from a UniFi Access Hub. Mobile unlock through the UniFi Access or UI apps means staff and visitors can enter with a tap of their phone, while the system is managed locally with no monthly fees. Whether you're securing an office, retail space, warehouse, or commercial site anywhere in Australia, the UA-Lite delivers clean, secure access control with genuine Ubiquiti stock and fast Australia-wide shipping. Credentials NFC + Bluetooth Security Element Chip Power Single-Cable PoE Mounting IP54 Wall-Mount Why Choose the UniFi Access Reader Lite? NFC & Bluetooth Credentials Unlock with NFC cards/fobs or mobile credentials over Bluetooth (BLE 4.1) — staff and visitors simply tap a card or phone to enter, with no exposed keypads or worn-out fobs. Built-in Security Element Chip A dedicated security element chip handles encrypted NFC credentials on the reader, keeping authentication data protected against cloning and tampering. Mobile Unlock Open doors straight from the UniFi Access or UI mobile apps — ideal for issuing and revoking access remotely without re-keying or reprinting cards. Single-Cable PoE Installation One Ethernet cable from a UniFi Access Hub delivers both power (802.3af PoE, max 6 W) and data — no separate power run, no electrician required. Wide NFC Standard Support Reads ISO 14443A/B and 15693 plus NFC Tag 1–5 and MIFARE Classic, Plus, Ultralight, and DESFire EV1/EV2 for flexible credential rollouts. IP54 Rated for Tough Conditions An IP54 rating and a wide −40°C to 40°C operating range keep the UA-Lite reliable indoors and at covered outdoor entries across Australian climates. UniFi Access — No Subscription Manage users, visitors, schedules, and access policies through the UniFi Access Controller — fully local, with no monthly fees or cloud lock-in. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UA-Lite (UniFi Access Reader Lite) Credentials NFC cards/fobs • Bluetooth mobile unlock (UniFi Access / UI apps) Security Built-in security element chip (encrypted NFC credentials) NFC Frequency 13.56 MHz • Read range < 30 mm NFC Standards ISO 14443A, ISO 14443B, ISO 15693 NFC Technology NFC Tag 1–5 • MIFARE Classic, Plus, Ultralight, DESFire EV1/EV2 Connectivity Ethernet • BLE 4.1 Network Interface 10/100 Mbps Ethernet Power Method 802.3af PoE (via UniFi Access Hub) Max Power Consumption 6 W IP Rating IP54 LEDs White / Blue Button (1) Reset Mounting Wall-mount Dimensions 94.91 × 40.00 × 31.10 mm Weight 65 g Operating Temperature −40°C to 40°C Operating Humidity 5–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UA-Lite Datasheet UA-Lite Installation Guide What's in the Box UniFi Access Reader Lite UA-Lite NFC & Bluetooth door reader. Mounting Hardware Wall-mount bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Access Hub and network cable are required and sold separately. Best For Offices & Co-Working Touchless NFC and mobile unlock for main doors, meeting rooms, and secure areas. Retail & Hospitality Control staff-only doors and back-of-house entries with revocable mobile credentials. Warehouses & Sites IP54-rated and PoE-powered for covered entries and tough working environments. Multi-Tenant Buildings Issue, schedule, and revoke access per user without re-keying locks or reprinting cards. Requires a UniFi Access Hub and a UniFi Access Controller host running UniFi Access. Powered over a single Ethernet cable from the Access Hub (802.3af PoE) — no separate power supply needed. Wall-mounts at any door; IP54 rating suits covered outdoor entries. Supports NFC cards/fobs and Bluetooth mobile unlock through the UniFi Access and UI apps. Frequently Asked Questions Does the UA-Lite need a separate power supply? No. The UA-Lite is powered over a single Ethernet cable from a UniFi Access Hub using 802.3af PoE, so no separate power run is required. What do I need to run the UA-Lite? A UniFi Access Hub to power and connect the reader, plus a UniFi Access Controller host running UniFi Access to manage users, doors, and policies. How do people unlock the door? By tapping an NFC card or fob, or by unlocking from their phone over Bluetooth using the UniFi Access or UI mobile apps. Can it be used at outdoor doors? The UA-Lite carries an IP54 rating and a −40°C to 40°C operating range, making it suitable for indoor and covered outdoor entries. Which NFC credentials does it support? It supports ISO 14443A/B and 15693, NFC Tag 1–5, and MIFARE Classic, Plus, Ultralight, and DESFire EV1/EV2 credentials. Is the UA-Lite NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-Lite is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Network — NDAA Compliant Ubiquiti UniFi Switch Lite 8 PoE — 8-Port Gigabit Managed Switch (USW-Lite-8-PoE) The UniFi Switch Lite 8 PoE (USW-Lite-8-PoE) is a compact, fully managed Layer 2 Gigabit switch built for clean, single-pane UniFi deployments. Eight GbE RJ45 ports — four of them PoE+ (802.3at) with a 52W total PoE budget — power and connect your access points, IP cameras, and VoIP phones from one fanless, silent unit. Whether you're wiring a home office, retail counter, or small business anywhere in Australia, it manages effortlessly through the UniFi Network application. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 8x GbE (4x PoE+) PoE Budget 52W Total Cooling Fanless & Silent Management UniFi Network Why Choose the UniFi Switch Lite 8 PoE? 8 Gigabit Ports, 4 with PoE+ Eight GbE RJ45 ports — four delivering PoE/PoE+ up to 30W each — power and connect cameras, access points, and VoIP phones over a single cable while four data-only ports handle the rest. 52W Total PoE Budget A 52W PoE budget (with the included 60W power adapter) drives multiple PoE devices at once — perfect for a small UniFi camera or access-point cluster. Silent Fanless Design Passive cooling means zero noise — ideal for desks, reception areas, meeting rooms, and any space where a noisy switch isn't welcome. Full Layer 2 Management VLANs, STP/RSTP, IGMP snooping, LACP aggregation, port mirroring, storm control, 802.1X, DHCP snooping, ACLs, and more — enterprise-grade control in a compact unit. Managed in UniFi Network Adopt and configure from the UniFi Network application (v7.2.94+) for one-pane visibility across your entire UniFi stack — no per-device logins. Compact & Wall-Mountable At just 99.6 x 163.7 x 31.7 mm and 295 g, it sits on a desk or mounts to a wall with the included mounting kit — tidy installs in tight spaces. 16 Gbps Switching Capacity 8 Gbps non-blocking throughput and 16 Gbps switching capacity keep traffic flowing at full line rate across all eight ports. NDAA Compliant Confirmed NDAA Section 889 compliant by Ubiquiti — suitable for government, defence, and security-sensitive installations. Technical Specifications Model USW-Lite-8-PoE Networking Interface (8) 10/100/1000 MbE RJ45 ports PoE Interface (4) PoE/PoE+ (802.3af/at) Max. PoE per Port (PSE) PoE+: 30W Total PoE Budget 52W (with included 60W power adapter) Switching Capacity 16 Gbps Non-Blocking Throughput 8 Gbps Forwarding Rate 12 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Management Layer 2 — UniFi Network (Ethernet in-band) Power Method External 54V / 60W AC/DC adapter (included) Supported Voltage Range 50–57V DC Max. Power Consumption 8W (excluding PoE output) Enclosure Polycarbonate Dimensions / Weight 99.6 × 163.7 × 31.7 mm • 295 g Mounting Compact desktop & wall (kit included) Operating Temperature −15°C to 40°C, 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Application Requirements UniFi Network v7.2.94 and later Downloads & Resources USW-Lite-8-PoE Tech Specs Datasheet (PDF) What's in the Box UniFi Switch Lite 8 PoE USW-Lite-8-PoE 8-port Gigabit managed PoE switch. 60W Power Adapter External 54V / 60W AC/DC power adapter included. Wall-Mount Kit Mounting hardware for tidy wall installs included. Not Included Network cables and a UniFi Network host (Cloud Gateway / Cloud Key / self-hosted) are required separately. Best For Homes & Home Offices Power a couple of cameras and an access point silently from a single tidy desktop switch. Retail & Reception Fanless and compact for front-of-house spaces where silence and clean cabling matter. Small Business Full Layer 2 VLAN and security control managed centrally in the UniFi Network app. UniFi Camera & AP Clusters 52W PoE budget feeds a small group of UniFi Protect cameras or access points over one cable each. Requires a UniFi Network host (Cloud Gateway, Cloud Key, or self-hosted controller) running UniFi Network v7.2.94 or later for management. 52W PoE budget across 4 PoE+ ports — plan device wattage so total draw stays within budget. Mounts on a desk or wall using the included kit; passive cooling means no airflow clearance needed for fans. Use the included 60W adapter to unlock the full 52W PoE budget. Frequently Asked Questions How many PoE ports does the USW-Lite-8-PoE have? Four of the eight Gigabit ports support PoE/PoE+ (up to 30W per port), with a 52W total PoE budget. The other four ports are data-only. Does it need a separate controller? Yes. It's managed through the UniFi Network application, which runs on a UniFi Cloud Gateway, Cloud Key, or a self-hosted controller (v7.2.94 or later). Is it fanless? Yes. The switch uses passive cooling for completely silent operation — ideal for offices, desks, and reception areas. Is the power adapter included? Yes. An external 54V / 60W AC/DC power adapter is included in the box, along with a wall-mount kit. Is the USW-Lite-8-PoE NDAA compliant? Yes. Ubiquiti confirms the switch is NDAA Section 889 compliant, making it suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant UniFi Access Door Hub Mini — Single-Door PoE++ Access Controller (UA-Hub-Door-Mini) The UniFi Access Door Hub Mini (UA-Hub-Door-Mini) is a compact, DIN-rail-mounted controller that brings full single-door access control to the UniFi Access ecosystem. It powers and manages an electric lock, exit-request button, and door-position sensor over a single PoE++ cable — and adds two PoE+ output ports to power your UniFi Access reader and lock directly from the hub. With support for up to 3,000 users and centralised management through UniFi Access, it's ideal for offices, retail spaces, and small commercial sites across Australia with no licence fees and no cloud lock-in. Genuine Ubiquiti stock with fast Australia-wide shipping. Doors 1 Door Capacity 3,000 Users Power PoE++ Input I/O Relay + REX + Sensor Why Choose the UniFi Access Door Hub Mini? Complete Single-Door Control Secure one access-controlled door end to end — drive an electric strike or magnetic lock via the onboard relay, monitor door position, and accept exit requests, all from one compact unit. PoE++ Powered With PoE+ Outputs A single PoE++ input powers the hub, while two PoE+ output ports (30W each, 45W aggregate) let you power your UniFi Access reader and lock straight from the device — no extra power supplies. Up to 3,000 Users Scales well beyond a typical small site, storing up to 3,000 user credentials for a single managed door. Dry & Wet Relay Options A switchable relay supports both dry (30V DC, 1A) and wet (12V DC, 1A) output, giving you flexibility to wire a wide range of electric strikes and magnetic locks. Simple DIN-Rail Installation Mounts cleanly to a DIN rail (included) inside a comms cabinet or enclosure, with three GbE RJ45 ports for network and PoE distribution. UniFi Access — No Licence Fees Manage doors, users, schedules, and logs through the UniFi Access app and web console — fully local, with no monthly subscription or per-door licensing. UL 294 Certified Independently certified to UL 294 (Level I) and CAN/ULC-60839-11-1 (Grade I) for access control system reliability. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UA-Hub-Door-Mini Solution Type Compact single-door access control hub Supported Doors 1 Maximum User Count 3,000 Networking Interface (3) GbE RJ45 ports Power Method PoE++ (UL 294 Power-limited Class 2 PSU) PoE Interface (1) PoE++ input, 50V DC, 1A • (2) PoE+ outputs, 50V DC, 30W per port (max 45W aggregated) Max. Power Consumption 19W (without PoE output) • 50W (with PoE output) Dry Output Relay 30V DC, 1A Wet Output Relay 12V DC, 1A Input Terminals (1) Door exit request (REX) • (1) Door position Buttons (1) Factory reset • (1) Dry/Wet switch Management UniFi Access app & web console Mounting DIN-rail (included) Enclosure Material Polycarbonate, metal Dimensions 113 × 66 × 27.6 mm Weight 190 g Indoor / Outdoor Use Indoor only Operating Temperature 0°C to 40°C Operating Humidity 5–90% non-condensing Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 UL 294 Level Destructive attack I • Line security I • Endurance I • Standby power I Compliance NDAA compliant Downloads & Resources UA-Hub-Door-Mini Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Access Door Hub Mini UA-Hub-Door-Mini single-door access controller. DIN-Rail Mount DIN-rail mounting hardware for clean cabinet installation. Documentation Quick-start installation guide. Not Included Door lock hardware, UniFi Access reader, credentials, and PoE source are sold separately. Best For Offices & Suites Secure a main entry or server room with tap, mobile, and PIN access for up to 3,000 staff. Retail & Back-of-House Control stockroom and staff-only doors while keeping logs and schedules in UniFi Access. Small Commercial Sites Add a single managed door without a full multi-door hub — compact, DIN-rail, no licence fees. Government & Secure Sites NDAA-compliant, UL 294 certified hardware for supply-chain-sensitive deployments. Requires a UniFi Access host (UNVR, Cloud Key, or compatible UniFi console) running the UniFi Access application. Powered by a PoE++ source — pair with a UniFi PoE++ switch for single-pane management. Mounts to a DIN rail inside a comms cabinet or enclosure (indoor use only). Two PoE+ output ports can power the UniFi Access reader and lock directly from the hub. Frequently Asked Questions What is the UA-Hub-Door-Mini used for? It's a compact controller that manages a single access-controlled door using UniFi Access readers and locks, supporting up to 3,000 users. How is it powered? By a single PoE++ input. It also provides two PoE+ output ports (30W each) to power your UniFi Access reader and lock directly. Does it require a subscription? No. UniFi Access is licence-free — there are no monthly fees or per-door charges. Can it control mag locks and electric strikes? Yes. The switchable relay supports dry (30V DC, 1A) and wet (12V DC, 1A) output for magnetic locks and electric strikes. Can it be installed outdoors? No. The Door Hub Mini is rated for indoor use only and mounts to a DIN rail inside a cabinet or enclosure. Is it NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-Hub-Door-Mini is NDAA Section 889 compliant and UL 294 certified. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant Ubiquiti UA-Intercom-Viewer — UniFi Access 5″ PoE Touch Display The UniFi Access Intercom Viewer (UA-Intercom-Viewer) brings live visitor screening to a sleek 5″ capacitive touchscreen, powered over a single PoE cable. It pairs with the UniFi Access Intercom and Reader Pro to deliver live video, two-way audio, and remote unlock from lobbies, reception desks, and security stations. Designed for indoor spaces across homes, offices, and commercial sites anywhere in Australia — with genuine Ubiquiti stock and fast Australia-wide shipping. Available as a single unit or a value-packed 3-Pack. Display 5″ Touch Audio Two-Way Power Single-Cable PoE Compliance UL 294 / NDAA Why Choose the UniFi Access Intercom Viewer? 5″ Capacitive Touchscreen A 127 mm (5″) portrait display at 1280 × 720 and 300 nits presents crisp live video with an intuitive multi-touch interface for fast visitor screening. Live Video & Two-Way Audio A built-in microphone and speaker let staff see and speak with visitors at the door, then grant or deny access — all from the viewer. Remote Unlock & Access Control Works with the UniFi Access Intercom and Reader Pro to trigger remote unlock and manage entry from interior reception and security points. Single-Cable PoE Installation Powered entirely over PoE (44–57 V DC, max 5 W) — one Ethernet cable carries power and data for a clean, tidy install with no separate power run. Durable Glass & Alloy Build A glass and polycarbonate face with an aluminium-alloy mount gives the viewer a premium, hard-wearing finish suited to high-traffic indoor entries. UniFi Access — No Subscription Managed through the UniFi Access application — no monthly fees and full local control across your door-access ecosystem. UL 294 Certified Certified to UL 294 and CAN/ULC-60839-11-1 Grade I, with mobile unlock support — built for professional access-control deployments. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model UA-Intercom-Viewer (Single Unit) / UA-Intercom-Viewer-3 (3-Pack) Display 127 mm (5″) diagonal, capacitive multi-touch Resolution 1280 × 720 (portrait) Luminance 300 nits (typical) Audio Built-in microphone & speaker Buttons (1) Factory reset Networking Interface (1) 10/100 Mbps RJ45 port Power Method PoE • UL 294 Power-limited Class 2 PSU Supported Voltage 44–57 V DC Max. Power Consumption 5 W Mobile Unlock Supported Management UniFi Access application Enclosure Material Glass, polycarbonate Mount Material Aluminium alloy Mounting Wall (included) • Gang box mount (optional) Indoor / Outdoor Indoor only Dimensions 135 × 72 × 31.8 mm Weight 168 g Operating Temperature 0°C to 40°C, 5–95% non-condensing Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 (Grade I) Compliance NDAA compliant Downloads & Resources UA-Intercom-Viewer Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Access Intercom Viewer Single unit, or 3 units in the value-packed 3-Pack (UA-Intercom-Viewer-3). Wall Mount Kit Aluminium-alloy wall mount with screws and anchors included. Documentation Quick-start guide and installation instructions. Not Included UniFi Access Intercom / Reader Pro, Access Hub, PoE switch and network cable are required and sold separately. Best For Reception & Lobbies Screen visitors and grant access from the front desk without leaving the counter. Security Stations Centralise live video and two-way audio for guards monitoring multiple entries. Offices & Apartments Add an interior touchpoint for the UniFi Access Intercom at internal doors and suites. Multi-Door Sites The 3-Pack covers several interior screening points across a single building. Requires a UniFi Access deployment with an Access Hub and a UniFi Access Intercom or Reader Pro at the door. Powered by any 802.3 PoE switch — pair with a UniFi PoE switch for single-pane management. For indoor use only; mounts to a wall out of the box, with a gang-box mount available separately. Cat 5e cabling minimum recommended for reliable PoE delivery. Frequently Asked Questions What does the Intercom Viewer work with? It pairs with the UniFi Access Intercom and Reader Pro to bring live video, two-way audio, and remote unlock into interior spaces. The Intercom, Reader Pro, and Access Hub are sold separately. How is the Intercom Viewer powered? It is powered entirely over PoE (44–57 V DC), so a single Ethernet cable carries both power and data with a max draw of 5 W. Cat 5e is the minimum recommended cabling. Can it be used outdoors? No. The Intercom Viewer is rated for indoor use only, with an operating range of 0°C to 40°C. Mount it at interior reception, lobby, or security-station locations. Is it available in a multi-pack? Yes. Choose a single unit (UA-Intercom-Viewer) or the value-packed 3-Pack (UA-Intercom-Viewer-3) for covering several interior screening points. Is the Intercom Viewer NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-Intercom-Viewer is NDAA Section 889 compliant and UL 294 certified — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant Ubiquiti UniFi Access G3 Reader — NFC & Mobile BLE Door Reader (UA-G3) The UniFi Access G3 Reader is a compact, weatherproof door reader for the UniFi Access ecosystem — unlocking doors with NFC cards & key fobs, Apple/Google Wallet passes, and mobile BLE, plus a handwave request-to-exit gesture. Sealed to IP55 and certified to UL 294, it suits offices, apartments, retail and commercial entrances indoors or out. Available in Black (UA-G3-B) and White (UA-G3-W), with genuine Ubiquiti stock, no licence fees, and fast Australia-wide shipping. Credentials NFC / Wallet / BLE Certified UL 294 Protection IP55 Power Single-Cable PoE Why Choose the UniFi Access G3 Reader? Tap, Wallet & Mobile Unlock Open doors with NFC cards and key fobs, Apple Wallet & Google Wallet passes, or mobile BLE from the UniFi Identity app — one reader covers every credential your team and visitors prefer. Handwave Request-to-Exit A built-in proximity sensor lets people wave to exit — a clean, touch-free release on the inside of the door with no extra exit button to wire. Indoor & Outdoor Ready An IP55-rated polycarbonate-and-glass body with a wide −30°C to 45°C operating range handles entries, foyers, and exposed doorways in tough Australian conditions. UL 294 Access-Control Certified Independently certified to UL 294 and CAN/ULC-60839-11-1 (Grade I), with ESD/EMP protection — engineered for professional, code-compliant installations. Single-Cable PoE Install One Ethernet cable delivers power and data (max 5 W) — no separate PSU. Mounts to a standard in-wall gang box for a flush, tidy finish. UniFi Access — No Subscription Manage doors, users, schedules, and credentials from the UniFi Access app or web console — fully self-hosted with no licence or monthly fees. Broad NFC Support 13.56 MHz NFC reads MIFARE Classic / DESFire, ISO/IEC 14443A/B, 15693, 18092, Sony FeliCa (ID), and NFC Forum tags — easy migration from existing card systems. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model UniFi Access G3 Reader — UA-G3 (Black: UA-G3-B / White: UA-G3-W) Credential Methods NFC cards & key fobs, Apple/Google Wallet, mobile BLE unlock Request to Exit Handwave (proximity sensor) Connectivity BLE 4.1 • NFC 13.56 MHz NFC Read Range < 30 mm NFC Technology ISO/IEC 14443A/B, 15693, 18092 • MIFARE Classic / DESFire • Sony FeliCa (ID) • NFC Forum T1T–T5T • ECP 2.0 Network Interface (1) 10/100 MbE RJ45 Power Method PoE • 48 V DC • max 5 W Weatherproof Rating IP55 (indoor & outdoor use) ESD / EMP Protection Air: ±15 kV • Contact: ±8 kV Indicators R/G/B/W LEDs • speaker • proximity sensor Mounting In-wall gang box (included) • junction box (optional) Enclosure Polycarbonate & glass • aluminium-alloy mount Dimensions / Weight 93 × 40 × 36.5 mm • 82 g Operating Temperature −30°C to 45°C • 5–90% non-condensing UL 294 Levels Destructive attack I • Line security I • Endurance I • Standby power I Certifications CE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1 (Grade I) Management UniFi Access app & web console (no licence fees) Compliance NDAA compliant Colours Available Black (UA-G3-B) / White (UA-G3-W) Downloads & Resources UA-G3 Datasheet UA-G3 Installation Guide What's in the Box UniFi Access G3 Reader Your choice of Black (UA-G3-B) or White (UA-G3-W) finish. Mounting Hardware In-wall gang-box mounting bracket, screws, and anchors included. Documentation Quick-start guide and installation instructions. Not Included A UniFi Access Hub, door hardware, credentials, and a PoE switch are required and sold separately. Best For Offices & Workplaces Tap, Wallet, or mobile unlock for staff with central scheduling and instant credential revocation. Apartments & Foyers Secure resident and visitor entry on shared doors with handwave exit and no per-door licence fees. Retail & Reception A clean glass-front reader for front-of-house and back-of-house doors, indoors or out. Commercial & Multi-Door Scale across many readers and doors, all managed from one UniFi Access console. Requires a UniFi Access Hub (e.g. UA-Hub / UAH) and a UniFi Access host running the Access application. Powered over a single PoE cable — pair with a UniFi PoE switch for single-pane management. Mounts to a standard in-wall gang box out of the box; a junction-box adapter is available separately. Cat 5e cabling is the minimum recommended for PoE runs. Frequently Asked Questions What credentials does the G3 Reader support? NFC cards and key fobs, Apple Wallet and Google Wallet passes, and mobile BLE unlock from the UniFi Identity app. Does the G3 Reader have a PIN keypad? No. The standard G3 Reader uses tap, Wallet, and mobile unlock. For keypad/PIN entry, choose a UniFi Access reader model with an integrated keypad. Does it need a subscription? No. UniFi Access runs locally on a UniFi Access host with no licence or monthly fees. Can it be used outdoors in Australia? Yes. It is rated IP55 for indoor and outdoor use with a −30°C to 45°C operating range, suiting Australian entryways and exposed doors. What do I need to run it? A UniFi Access Hub plus a UniFi Access host, a PoE switch to power the reader, and your door lock hardware (sold separately). Is the G3 Reader NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-G3 is NDAA Section 889 compliant and UL 294 certified. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UNVR-Instant — UniFi Protect Compact PoE NVR with 6-Port PoE Switch & HDMI ViewPort The Ubiquiti UNVR-Instant is the simplest way to deploy a complete UniFi Protect surveillance system — a compact desktop NVR with a built-in 6-port Gigabit PoE switch, an HDMI ViewPort for local live viewing, and a single 3.5″ HDD bay for local recording. Power and connect up to six 4K UniFi cameras directly from the unit, manage everything through the UniFi Protect app or web interface, and keep full control of your footage with no monthly subscription. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's the ideal recorder for homes, offices, and small businesses across Australia. PoE Ports 6 × Gigabit Managed Cameras Up to 6 × 4K ViewPort HDMI Output Storage 1 × 3.5″ HDD Bay Why Choose the Ubiquiti UNVR-Instant? Built-in 6-Port Gigabit PoE Switch Power and connect up to six UniFi cameras directly from the UNVR-Instant — no separate PoE switch required. A 40 W PoE budget delivers up to 15.4 W per port (802.3af PoE), plus a Gigabit RJ45 uplink to your network. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to display live multi-camera feeds straight from the unit — no PC, tablet, or app required for on-site monitoring. 3.5″ HDD Bay — Local Storage Install a compatible 3.5″ SATA hard drive for local recording, with built-in Data Protection to guard against drive failure. Keep full control of your footage — no cloud, no data leaving your premises. Manage Up to 15 Cameras Scale to suit your site — up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. UniFi Protect & Access — No Subscription Run UniFi Protect cameras and up to 50 UniFi Access hubs from one unit, managed via the UniFi app or web interface — fully local, with no monthly fees. Plug-and-Play Camera Adoption UniFi cameras connected to the PoE ports are automatically discovered and adopted into UniFi Protect — no manual IP configuration or complex setup required. Compact Desktop Form Factor At just 220 × 220 × 47 mm and 1.04 kg, the UNVR-Instant fits neatly on a shelf, in a comms cabinet, or wall / DIN-rail mounted — ideal for homes, small offices, and retail stores. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, education, and security-sensitive installations where supply-chain integrity is a mandatory requirement. Technical Specifications Model UNVR-Instant Managed Cameras 6 × 4K • 8 × 2K • 15 × HD Managed Access Hubs Up to 50 Management Applications UniFi Protect, UniFi Access, UniFi Connect Networking Interface 1 × GbE RJ45 uplink • 6 × GbE PoE RJ45 downlink • 1 × HDMI (ViewPort) Storage 1 × 3.5″ HDD bay (drive not included) • Data Protection Processor Quad-core ARM® Cortex®-A55 @ 1.7 GHz Memory 4 GB Display 1.14″ status screen PoE Budget 40 W total • up to 15.4 W per port (PoE / 802.3af) • 44–57 V Power Supply Internal AC/DC, 60 W • 100–240 V AC, 1.5 A max, 50/60 Hz Max. Power Consumption 9 W (excluding PoE / drive) Max. Drive Power Budget 11 W Management Ethernet • Bluetooth Mounting Wall & DIN-rail mount (included) Form Factor Compact desktop Enclosure Polycarbonate Dimensions / Weight 220 × 220 × 47 mm • 1.04 kg Operating Temperature 0°C to 40°C, 5–95% non-condensing Certifications FCC, IC, CE, Electrical Safety, SRRC, Anatel Compliance NDAA compliant Downloads & Resources UNVR-Instant Tech Specs UNVR-Instant Installation Guide What's in the Box UNVR-Instant Unit Compact UniFi Protect PoE NVR with a built-in 6-port PoE switch and HDMI ViewPort. Mounting Kit Wall and DIN-rail mounting hardware included. Documentation Quick-start guide and installation instructions. Not Included A 3.5″ SATA HDD and UniFi cameras are sold separately. Best For Homes & Driveways Power up to six 4K UniFi cameras, record locally, and watch live on your TV via HDMI ViewPort. Retail & Hospitality A self-contained, subscription-free CCTV recorder for shopfronts, cafes, and small stores. Offices & Strata Cover entries, car parks, and common areas with a tidy, low-profile NVR for any comms cabinet. UniFi Protect Starter Systems The recommended starting point for a new UniFi Protect deployment with G6 Turret, Bullet, or Dome cameras. Runs UniFi Protect locally — no monthly fees and no data leaving your premises. Connect up to six UniFi cameras directly to the built-in PoE ports; add more via a switch on the uplink, up to the supported camera count. Install a compatible 3.5″ surveillance-grade SATA HDD (sold separately) for recording. Wall or DIN-rail mountable; status screen and HDMI ViewPort make on-site setup quick. Frequently Asked Questions Does the UNVR-Instant require a UniFi Protect subscription? No. UniFi Protect runs fully locally on the UNVR-Instant. There are no monthly fees and no cloud subscription required. What hard drive do I need? A compatible 3.5″ SATA HDD. Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for 24/7 recording. The drive is not included. How many cameras can it support? Up to 6 × 4K, 8 × 2K, or 15 × HD UniFi Protect cameras, with mixed resolutions supported within those limits. Can I connect more than 6 cameras? Yes. The six built-in PoE ports power local cameras directly; additional cameras can connect via a separate PoE switch on the Gigabit uplink, up to the unit's maximum camera count. Which cameras are compatible? All UniFi Protect cameras, including the G6 Turret, G6 Bullet, G6 Dome, and earlier G4/G5 series. Can it also run UniFi Access? Yes. The UNVR-Instant supports UniFi Access and can manage up to 50 Access hubs alongside UniFi Protect cameras. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G4 Doorbell — 2MP Wi-Fi Video Doorbell with Night Vision (UVC-G4-Doorbell) The UniFi Protect G4 Doorbell brings smart, subscription-free video monitoring to your front door. A 5MP sensor delivers crisp 1600×1200 (2MP) video at 30 FPS with a tall, person-friendly 155° diagonal view, while a built-in IR night mode, PIR motion detection, two-way audio, and a programmable display let you see and speak with visitors day or night. It connects over dual-band Wi-Fi and wires into a standard 16–24V AC doorbell transformer, recording locally to your UniFi Protect host with no monthly fees. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Resolution 2MP / 30 FPS Night Vision Built-in IR Protection IPX4 Weather Connectivity Dual-Band Wi-Fi Why Choose the UniFi Protect G4 Doorbell? Tall 155° View of Your Doorstep A 5MP sensor with a wide H:138° / V:114° / D:155° field of view captures visitors head-to-toe, plus packages left on the ground — recorded at a clear 1600×1200 (2MP) resolution at 30 FPS. Real-Time Two-Way Audio A built-in microphone and speaker let you talk with visitors or deter intruders straight from the UniFi Protect app — whether you're home, at work, or away. Programmable Built-In Display The integrated colour display can show custom messages to visitors — from a friendly greeting to "Please leave parcels here" — configurable in UniFi Protect. Night Vision & PIR Motion Detection Built-in IR LED illumination with an IR cut filter keeps footage clear after dark, while PIR-based motion detection triggers smart alerts the moment someone approaches. IPX4 Weather-Resistant A sealed polycarbonate enclosure rated IPX4 with a −10°C to 40°C operating range handles rain and the elements at the front door across Australian conditions. Easy Wired Install with Included Mounts Wires into a standard 16–24V AC doorbell transformer and ships with both flat-wall and 20° wedge mounts — angle it toward your path or driveway without extra parts. UniFi Protect — No Subscription Footage records locally to your UniFi Protect host — live view, recordings, alerts, and settings all managed through the UniFi Protect app or web interface with no monthly fees and no cloud lock-in. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UVC-G4-Doorbell Image Sensor 5 MP CMOS Video Resolution 1600 × 1200 (2 MP, 4:3) @ 30 FPS Video Compression H.264 Lens Fixed focal length Field of View H: 138° • V: 114° • D: 155° Night Vision Built-in IR LED illumination + IR cut filter Motion Detection PIR sensor Display Built-in programmable display Audio Built-in microphone (can be disabled) + speaker, two-way Networking 802.11a/b/g/n/ac Wi-Fi • Bluetooth 4.2 Processor Quad-core Arm® Cortex®-A53 Power 16–24 V AC, 50/60 Hz (standard doorbell transformer) Max Power Consumption 12 W Buttons (1) Ring button • (1) Factory reset Weatherproof Rating IPX4 Enclosure Polycarbonate Mounting Flat wall + 20° wedge (both included) Dimensions 118.3 × 46.8 × 25.8 mm Weight 130 g (without mount) Operating Temperature −10°C to 40°C, 0–90% non-condensing Software UniFi Protect (web + iOS / Android apps) Certifications FCC, IC, CE Compliance NDAA compliant Downloads & Resources UVC-G4-Doorbell Datasheet Ubiquiti Installation Guide What's in the Box UniFi Protect G4 Doorbell UVC-G4-Doorbell unit with built-in camera, display, microphone, and speaker. Mounting Kits Flat-wall mount (aluminium alloy) and 20° wedge mount (polycarbonate), screws, and anchors. Documentation Quick-start guide and installation instructions. Not Included A 16–24V AC doorbell transformer and a UniFi Protect host (UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE) are required and sold separately. Best For Homes & Apartments See and speak with visitors at the front door, with a tall view that captures packages on the ground. Offices & Receptions Greet guests with a custom on-screen message and grant entry over two-way audio. Existing UniFi Sites Adds a doorbell to any UniFi Protect deployment with no subscription and unified management. Secure Facilities NDAA-compliant hardware suited to government and security-sensitive entries. Requires a UniFi Protect host (UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE) running UniFi Protect. Wires into an existing 16–24V AC doorbell transformer; pairs with compatible mechanical and digital chimes (see datasheet list). Connects over dual-band Wi-Fi — ensure good signal at the door location. Ships with flat-wall and 20° wedge mounts to angle the view toward your path or entry. Frequently Asked Questions Does the G4 Doorbell require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi Protect host such as a UNVR, Cloud Key Gen2 Plus, or Dream Machine Pro/SE. There are no monthly fees or cloud subscriptions. How is it powered? It wires into a standard 16–24V AC doorbell transformer (50/60 Hz). It is not a PoE device. If you don't have an existing transformer, one will need to be installed. Is the camera 5MP or 2MP? It uses a 5MP CMOS sensor and records video at 1600×1200 (2MP, 4:3) up to 30 FPS — a tall aspect ratio ideal for seeing visitors head-to-toe and packages at the door. Can I show a message to visitors? Yes. The built-in display can be programmed with custom messages through the UniFi Protect app or web interface. Is it suitable for outdoor use in Australia? Yes. The IPX4-rated polycarbonate enclosure and a −10°C to 40°C operating range suit a sheltered front-door location. The included 20° wedge mount helps angle it toward your path. Is the G4 Doorbell NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect ViewPort PoE HDMI Adapter (UFP-VIEWPORT) The UniFi Protect ViewPort (UFP-VIEWPORT) turns any HDMI display or TV into a live UniFi Protect video wall. Powered over a single PoE Ethernet cable, it connects to the local network hosting your UniFi Protect cameras and outputs up to 4K @ 30 FPS over HDMI — displaying up to 16 camera feeds simultaneously in custom high-density matrix layouts. It's the easiest way to put a permanent, always-on monitoring screen in a reception, control room, or back office anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. 4K HDMI Output Drives any HDMI display or TV at up to 4K @ 30 FPS for a crisp, full-resolution live view of your UniFi Protect cameras. Up to 16 Cameras at Once Show up to 16 IP camera feeds simultaneously in custom high-density matrix configurations — perfect for a dedicated video wall. Single-Cable PoE Both power and data arrive over one Ethernet run (PoE, up to 1 Gbps) — no separate power supply and no electrician required. Easy UniFi Protect Setup Plug-and-play integration with your existing UniFi Protect system — no extra software, no monthly fees, full local control. Technical Specifications Model UFP-VIEWPORT Function UniFi Protect ViewPort — PoE-to-HDMI video adapter Video Output HDMI, up to 4K @ 30 FPS Cameras Displayed Up to 16 IP cameras simultaneously, custom matrix layouts Network Interface RJ45, up to 1 Gbps Power Method PoE (Power over Ethernet) Software UniFi Protect (web & mobile app) Compliance NDAA compliant Downloads & Resources UFP-VIEWPORT Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant Ubiquiti UniFi Access Door Hub — PoE++ Single-Door Controller (UA-Hub-Door) The UniFi Access Door Hub (UA-Hub-Door) is a professional single-door access controller built for the Ubiquiti UniFi Access ecosystem. Powered by a single PoE++ cable, it manages electric strikes, magnetic locks, door sensors, request-to-exit devices, and UniFi Access readers — and includes a built-in 5-port Gigabit switch with PoE+ outputs to power your readers and cameras. With centralised management, support for up to 6,000 users, and no licence or subscription fees, it's ideal for offices, apartments, schools, healthcare, and commercial buildings across Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Doors 1 Door Max Users 6,000 Networking 5× Gigabit Power PoE++ Powered Why Choose the UniFi Access Door Hub? Purpose-Built Single-Door Controller Securely manages one access-controlled door — driving the electric strike or magnetic lock, monitoring the door position sensor, and handling request-to-exit and emergency release inputs. Scales to 6,000 Users Supports up to 6,000 users, making it suitable for everything from a small office to a busy multi-tenant building — all administered centrally in UniFi Access. Built-In 5-Port Gigabit Switch One PoE++ input plus four PoE+ outputs (30W per port, 45W aggregated) let the hub power your UniFi Access readers, cameras, or APs directly — no separate switch needed at the door. Single-Cable PoE++ Installation A single Ethernet run delivers both power and data to the hub for clean, reliable 24/7 operation in professional environments — no separate power supply required. Flexible, Revocable Credentials Paired with UniFi Access Readers it supports NFC cards, mobile BLE, and PIN entry plus remote unlock. Lost credentials are revoked instantly — no need to change locks or rewire. UL 294 Listed & Grade 1 Certified Carries UL 294 Level I ratings and a CAN/ULC-60839-11-1 Grade 1 assignment — engineered for genuine commercial and life-safety access deployments. No Licence or Subscription Fees UniFi Access is fully licence-free. Manage permissions, schedules, and access logs from the UniFi Access app or web console with no ongoing costs and full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model UA-Hub-Door Solution Type Single-door access controller (hub) Supported Doors 1 Maximum User Count 6,000 Networking Interface (5) 10/100/1000 Base-T Gigabit PoE Interface (1) PoE++ input, 50V DC, 1A • (4) PoE+ outputs, 50V DC, 30W per port (max 45W aggregated) Power Method PoE++ • UL 294 Power-limited Class 2 PSU Max. Power Consumption 30W (without PoE output) • 50W (with PoE output) Input Terminals (2) Door exit request • (1) Door position • (1) Emergency Digital Inputs Request to exit, request to enter, remote release, door position sensor Dry Output Relay Lock: 30V DC, 1A • Aux: 30V DC, 1A Powered Output Relay Lock: 12V DC, 1A • Aux: 12V DC, 0.33A Authentication (with readers) NFC cards & fobs, mobile BLE, PIN, remote unlock Management UniFi Access app & web console Indoor / Outdoor Indoor use only Operating Temperature 0°C to 40°C (32–104°F) Operating Humidity 5–95% non-condensing Enclosure / Mount Polycarbonate • DIN-rail mount (included) Dimensions 174.9 × 126 × 32.9 mm (6.9 × 5 × 1.3″) Weight 363 g (12.8 oz) Certifications CE, FCC, IC, UL 294 (Level I), CAN/ULC-60839-11-1 (Grade 1) Compliance NDAA compliant Downloads & Resources UA-Hub-Door Datasheet UA-Hub-Door Installation Guide What's in the Box UniFi Access Door Hub UA-Hub-Door single-door access controller with built-in 5-port Gigabit switch. DIN-Rail Mount Included DIN-rail mounting hardware for clean enclosure or comms-cabinet installation. Documentation Quick-start installation guide. Not Included Door lock hardware, UniFi Access readers, credentials, and a PoE++ source are required and sold separately. Best For Offices & Commercial Control front-door and internal-zone access with revocable credentials and full audit logs. Apartments & Strata Manage common-area and entry doors for thousands of residents — no per-user licensing. Education & Healthcare Secure sensitive areas with UL 294-listed, Grade 1 certified door control hardware. Retail & Back-of-House Lock down stockrooms and staff-only doors while powering readers over the same hub. Requires a UniFi Access host (e.g. a UniFi gateway or console running UniFi Access) for management. Powered by a PoE++ source — pair with a UniFi PoE++ switch for single-pane management. Mounts to a DIN rail inside an enclosure or comms cabinet; indoor installation only. Built-in PoE+ outputs power UniFi Access readers and compatible devices directly from the hub. Frequently Asked Questions What is the UA-Hub-Door used for? It controls a single access-controlled door using UniFi Access readers, locks, and sensors, and includes a 5-port Gigabit switch with PoE+ outputs to power connected devices. Does it require a subscription? No. UniFi Access is licence-free with no ongoing or monthly fees. How is it powered? The Door Hub is powered by a single PoE++ cable and can in turn supply PoE+ to readers and cameras from its four output ports. What types of locks are supported? Electric strikes, magnetic locks, and compatible relay-controlled door hardware via the dry and powered output relays. How many users can it support? Up to 6,000 users, managed centrally through the UniFi Access app or web console. Can it be installed outdoors? No. The Door Hub is rated for indoor use only and mounts to a DIN rail inside an enclosure or comms cabinet. Is the UA-Hub-Door NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-Hub-Door is NDAA Section 889 compliant, plus UL 294 listed and CAN/ULC Grade 1 certified. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant UniFi Access G3 Starter Kit — Single-Door Access Control System (UA-G3-SK) The UniFi Access G3 Starter Kit (UA-G3-SK) is a complete, ready-to-deploy single-door access control bundle from Ubiquiti. It pairs a PoE++ Door Hub Mini controller with a weatherproof G3 Reader and two Pocket Keyfobs — everything you need to secure one door with contactless NFC, mobile, and Apple/Google Wallet unlock. Built on the UniFi Access platform with no licence or subscription fees, it's ideal for offices, retail, residential, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Doors Supported 1 Door Unlock Methods NFC / Mobile / Wallet Power PoE++ Single Cable Licensing No Subscription Why Choose the UniFi Access G3 Starter Kit? Everything for One Door The kit ships with a Door Hub Mini controller, a G3 Reader, and two Pocket Keyfobs — a complete single-door solution out of the box. Just add an electric or magnetic lock to suit your door. Contactless & Mobile Unlock The G3 Reader supports NFC cards and keyfobs, Bluetooth mobile unlock, and Apple/Google Wallet credentials, plus a handwave request-to-exit gesture — flexible, modern entry for staff, tenants, and visitors. PoE++ Door Hub Mini The Door Hub Mini draws a single PoE++ input (50V DC, 1A) and provides three GbE RJ45 ports plus two PoE outputs — no separate power supply or electrician required for the controller itself. Scales to 3,000 Users A single Door Hub Mini supports up to 3,000 users on one door, with dry and wet output relays and request-to-exit and door-position inputs for full lock integration. Indoor & Outdoor Ready The G3 Reader is rated IP55 for indoor and outdoor use across a −30°C to 45°C range, with a polycarbonate-and-glass face and aluminium-alloy mount that suit tough Australian door installations. UniFi Access — No Subscription Manage doors, users, and credentials through the UniFi Access app and web portal with no licence or subscription fees. The kit also includes 10 free 1-year Touch Passes to get started. UL 294 Certified Both the Door Hub Mini and G3 Reader carry UL 294 and CAN/ULC-60839-11-1 access-control certification, giving you compliance peace of mind for commercial and regulated installs. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is a requirement. Technical Specifications Kit SKU UA-G3-SK In the Box (1) Door Hub Mini • (1) G3 Reader • (2) Pocket Keyfobs • 10 free 1-year Touch Passes Doors Supported 1 Maximum User Count 3,000 Management Application UniFi Access (app & web portal) Door Hub Mini Networking Interface (3) GbE RJ45 ports PoE Interface (1) PoE++ input, 50V DC, 1A • (2) PoE outputs, 50V DC, 30W per port (max 45W aggregated) Max. Power Consumption 19W (without PoE output) • 50W (with PoE output) Inputs (1) Door Exit Request • (1) Door Position Output Relays Dry: 30V DC, 1A • Wet: 12V DC, 1A Mounting DIN-rail (included) Dimensions / Weight 113 × 66 × 27.6 mm • 190 g Operating Temperature 0°C to 40°C, 5–90% non-condensing G3 Reader Access Methods NFC card & keyfob • Apple/Google Wallet • Mobile unlock (BLE) • Handwave request-to-exit Connectivity BLE 4.1 • NFC (13.56 MHz) NFC Technology ISO/IEC 14443A/B, 15693, 18092 • MIFARE Classic / DESFire • FeliCa (ID) • NFC Forum T1T–T5T • ECP 2.0 Networking Interface (1) 10/100 MbE RJ45 port Power Method PoE • 48V DC • max 5W Weatherproofing IP55 • Indoor & outdoor use Mounting In-wall / gang box (included) • junction box (optional) Dimensions / Weight 93 × 40 × 36.5 mm • 82 g Operating Temperature −30°C to 45°C, 5–90% non-condensing Pocket Keyfob (x2) NFC Technology ISO/IEC 14443 Type A • MIFARE DESFire EV3 4K • UniFi Access proprietary security protocol Weatherproofing IP54 Dimensions / Weight 84 × 39 × 7.4 mm • 16 g General Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Compliance NDAA compliant Downloads & Resources UA-G3-SK Tech Specs UniFi Access Installation Guide What's in the Box 1 × Door Hub Mini PoE++ powered single-door controller with three GbE ports, DIN-rail mount, and relay outputs for your lock. 1 × G3 Reader IP55 NFC + mobile access reader with in-wall gang-box mounting hardware included. 2 × Pocket Keyfobs MIFARE DESFire EV3 NFC keyfobs to issue to staff, tenants, or visitors. Not Included An electric or magnetic door lock, PoE switch/injector, and network cabling are required and sold separately. Best For Offices & Co-Working Contactless staff entry with mobile and Wallet credentials, all managed locally with no monthly fees. Retail & Hospitality Secure back-of-house and stockroom doors with NFC keyfobs and full access logs. Residential & Strata Give tenants and residents weatherproof keyless entry to common-area doors. Commercial Sites UL 294-certified, NDAA-compliant access control that scales as you add more doors. Requires a UniFi Access host running the UniFi Access application to manage doors and credentials. Powered by a single PoE++ feed to the Door Hub Mini — pair with a UniFi PoE switch for single-pane management. Add an electric strike or magnetic lock (sold separately) wired to the Door Hub Mini relay outputs. The G3 Reader mounts to an in-wall gang box; junction-box adapter available separately. Frequently Asked Questions What's actually included in the UA-G3-SK kit? One Door Hub Mini controller, one G3 Reader, two Pocket Keyfobs, and 10 free 1-year Touch Passes. A door lock is sold separately. Does UniFi Access require a subscription? No. UniFi Access runs locally through the UniFi Access app and web portal with no licence or subscription fees. How does the door unlock? The G3 Reader supports NFC cards and keyfobs, Bluetooth mobile unlock, and Apple/Google Wallet credentials, plus a handwave request-to-exit gesture. Can it be used outdoors in Australia? Yes. The G3 Reader is IP55-rated for indoor and outdoor use across a −30°C to 45°C range, suiting Australian door environments. How many users does it support? A single Door Hub Mini supports up to 3,000 users on one door, and you can scale by adding more readers and hubs. Is the kit NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-G3-SK is NDAA Section 889 compliant, plus UL 294 certified for access control. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant UniFi UVC-G6-Entry AI PoE+ Smart Doorbell & UniFi Access Reader The UniFi UVC-G6-Entry combines a PoE+ smart video doorbell, AI intercom and UniFi Access reader in one streamlined unit. A 5MP main camera screens visitors while a dedicated 8MP package camera watches deliveries at the doorstep, with enhanced two-way audio, NFC and mobile credentials, and native integration into UniFi Protect and UniFi Access. Built for homes, offices, apartments and commercial entries across Australia, it delivers enterprise-grade door entry with local control and no monthly fees. NDAA Section 889 compliant, genuine Ubiquiti stock, and fast Australia-wide shipping. Main Camera 5MP HDR Package Camera 8MP Delivery View Access Control NFC & Mobile Unlock Power Single-Cable PoE+ Why Choose the UniFi G6 Entry? Dual-Camera Doorstep View A 5MP main camera (1920 × 2560) covers visitors with a wide 180° diagonal field of view, while a dedicated 8MP package camera looks down to monitor deliveries left at the door — nothing on the doorstep goes unseen. AI Detection & Face Recognition On-device intelligence delivers people, vehicle and animal smart detections plus face recognition, cutting nuisance alerts so you only get notified about what matters at the front door. UniFi Access Reader Built In More than a doorbell — it doubles as an entry reader supporting NFC cards & keyfobs, Apple/Google Wallet credentials and mobile unlock for secure, keyless door entry inside a UniFi Access deployment. Enhanced Two-Way Intercom Talk to visitors in real time with enhanced two-way audio. Doorbell calls and intercom video route to compatible UniFi apps and receiver devices for live screening and remote unlock. Weatherproof & Tamper-Resistant An aluminium enclosure rated to IP55 handles rain and dust, while IK07 impact resistance and a wide −30°C to 50°C operating range keep it reliable through tough Australian conditions. Single-Cable PoE+ Installation One Ethernet cable carries power and data over PoE+ (max 16 W) through a GbE RJ45 port — cleaner and more reliable than a Wi-Fi doorbell, with no separate power run required. UniFi Protect & Access — No Subscription Live view, recordings, AI alerts and access management run locally through UniFi Protect and UniFi Access — full local control with no monthly cloud fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installations where supply-chain integrity is a requirement. See It in Action Official Ubiquiti walkthrough — Next-Gen UniFi Doorbell & Access Technical Specifications Model UVC-G6-Entry Product Type PoE+ smart video doorbell, AI intercom & UniFi Access reader Main Camera 5 MP CMOS — 1920 × 2560 (3:4) @ 30 FPS Package Camera 8 MP CMOS — 3264 × 2448 (4:3) @ 3 FPS Main Camera FOV H: 100° • V: 135° • D: 180° Package Camera FOV H: 66° • V: 51.7° • D: 78° Night Vision Built-in IR LED illumination + IR cut filter, up to 5 m AI / Smart Detection People, vehicles, animals • face recognition Access Credentials NFC card & keyfob, Apple/Google Wallet, mobile unlock Audio Enhanced two-way audio UniFi Application Suite UniFi Protect & UniFi Access Weatherproof Rating IP55 Impact / Tamper Resistance IK07 Network Interface GbE RJ45 port Connectivity BLE 4.1 • NFC Power Method PoE+ • 42–57 V DC • max 16 W Processor Quad-core Arm® Cortex®-A53 based chip Buttons Ring button, factory reset, tamper switch LEDs R/G/B/W status LEDs Mounting Wall mount, gangbox mount plate, 20° wedge mount (included) • junction box (optional) Enclosure Aluminium Dimensions / Weight 176 × 45 × 29.6 mm • 275 g Operating Temperature −30°C to 50°C, 5–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources UVC-G6-Entry Tech Specs UniFi G6 Entry Installation Guide What's in the Box UniFi G6 Entry (UVC-G6-Entry) The PoE+ smart doorbell, AI intercom and UniFi Access reader unit. Mounting Hardware Wall mount, gangbox mount plate and 20° wedge mount included; junction-box adapter optional. Documentation Quick-start guide and installation instructions. Not Included A PoE+ switch/injector, network cable and a UniFi Protect/Access host are required and sold separately. Best For Premium Homes A professional PoE+ front door with visitor video, package monitoring and keyless entry. Offices & Reception Screen visitors and manage staff access through UniFi Access with mobile and NFC credentials. Apartments & Multi-Tenant Managed entry points with intercom video, two-way audio and remote unlock workflows. Warehouses & Commercial PoE+ reliability and centralised UniFi management for secure staff and delivery access. Requires a UniFi Protect host (UNVR, Cloud Key+, Dream Machine Pro/SE/Wall) for video, and UniFi Access for door-entry features. Powered by PoE+ — pair with a UniFi PoE+ switch for single-pane management. Includes wall, gangbox and 20° wedge mounts out of the box; junction-box adapter available separately. NFC cards/keyfobs, Apple/Google Wallet and mobile unlock are supported within a UniFi Access deployment. Frequently Asked Questions Does the G6 Entry require a subscription? No. UniFi Protect and UniFi Access run locally on a UniFi host. There are no monthly fees or cloud subscriptions required for standard use. What do I need to run the G6 Entry? A UniFi Protect host for video plus a UniFi Access environment for door entry, a PoE+ switch or injector to power it, and a network cable. Full access control may also need an Access Hub and compatible lock hardware. What is the package camera for? The dedicated 8MP package camera angles down toward the doorstep so you can monitor parcels and deliveries placed near the entry — separate from the 5MP visitor view. Can it unlock a door without a key? Yes. Within UniFi Access it supports NFC cards and keyfobs, Apple/Google Wallet credentials and mobile unlock for secure keyless entry. Can it be powered over Ethernet? Yes. The G6 Entry uses PoE+ (max 16 W) over a single GbE RJ45 cable, carrying both power and data for a clean, reliable install. Is the G6 Entry NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G6 Entry is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UniFi USW-16-POE — 16-Port Gigabit Managed PoE+ Switch (Standard 16 PoE) The Ubiquiti UniFi USW-16-POE (UniFi Standard 16 PoE) is a 16-port Layer 2 managed Gigabit switch with eight PoE+ ports, two 1G SFP uplinks, and a silent fanless design — ideal for powering UniFi access points, cameras, and other PoE devices from a single rack-mounted unit. With a built-in 1.3″ touchscreen display, a 36 Gbps switching capacity, and full UniFi Network integration, it is a clean backbone for homes, offices, and small commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x GbE + 2x SFP PoE 8x PoE+ • 42W Capacity 36 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-16-POE? 16 Gigabit Ports + 2 SFP Uplinks Sixteen GbE RJ45 ports (10/100/1000) plus two 1G SFP uplink slots give you plenty of wired connectivity and fibre-ready uplinks for connecting to a core switch or gateway. 8x PoE+ — 42W Total Budget Eight ports deliver PoE/PoE+ up to 32W per port with a 42W total PoE budget — enough to power UniFi access points, cameras, and other PoE devices over a single cable. Silent Fanless Cooling A passive, fanless cooling system keeps the switch completely silent — perfect for offices, studios, and any space where noise matters. 1.3″ Touchscreen Display An on-device 1.3″ touchscreen shows port status, throughput, and device info at a glance — no need to open a laptop for quick checks. Layer 2 Managed — Full UniFi Control Manage VLANs, LACP, STP/RSTP, port isolation, 802.1X, ACLs, and more through UniFi Network — enterprise switching features in a single pane of glass. 1U Rack Mount — SGCC Steel A rugged SGCC steel 1U enclosure with included rack brackets fits standard server racks and supports 400–1200 mm rack depths. 36 Gbps Switching Capacity With 18 Gbps non-blocking throughput and a 36 Gbps switching capacity, the USW-16-POE handles busy networks without bottlenecks. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-16-POE (UniFi Standard 16 PoE) Networking Interface (16) GbE RJ45 (10/100/1000) • (2) 1G SFP PoE Ports (8) PoE/PoE+ Max. PoE per Port PoE: 15.4W • PoE+: 32W Total PoE Availability 42W Switching Capacity 36 Gbps Non-Blocking Throughput 18 Gbps Forwarding Rate 27 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer Layer 2 managed Display 1.3″ touchscreen (LCM) Power Method Universal input, 100–240V AC, 50/60 Hz Power Supply AC/DC, internal, 60W Max. Power Consumption 18W (excl. PoE) • 60W (incl. PoE output) Cooling Fanless / passive Form Factor Rack mount (1U) Enclosure SGCC steel Dimensions 442 × 200 × 44 mm Weight 2.8 kg (2.9 kg with brackets) Operating Temperature −5°C to 40°C, 10–90% non-condensing Application Requirements UniFi Network 7.2.94 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-16-POE Datasheet USW-16-POE Installation Guide What's in the Box UniFi USW-16-POE Switch The 16-port Standard 16 PoE managed switch with fanless cooling. Rack-Mount Brackets 1U rack-mount brackets and mounting hardware included. Power Cable AC power cable for the internal 60W power supply. Not Included SFP modules and network cables are sold separately. Best For Homes & Studios Silent fanless operation makes it ideal for living spaces, home offices, and recording studios. Offices & SMBs Power UniFi APs and IP phones over PoE+ while managing VLANs and security from UniFi Network. UniFi Camera Sites Run UniFi Protect cameras on PoE+ with a clean rack-mounted backbone. Server Racks 1U SGCC steel chassis with included brackets fits standard 19″ racks. Requires a UniFi Network host (Cloud Gateway, Dream Machine, Cloud Key, or self-hosted) running UniFi Network 7.2.94 or later for full management. Eight PoE+ ports share a 42W total PoE budget — plan device power draw accordingly. Use the two 1G SFP ports for fibre or high-speed copper uplinks to a core switch or gateway. Mounts in a standard 1U rack space using the included SGCC steel brackets. Frequently Asked Questions How much PoE can the USW-16-POE deliver? It has eight PoE/PoE+ ports (up to 32W per port) sharing a 42W total PoE budget. The internal power supply is rated at 60W, which covers both the switch and PoE output. Is the USW-16-POE fanless? Yes. It uses a passive, fanless cooling system for completely silent operation — ideal for offices, studios, and quiet environments. Does it need a UniFi controller? For full management you need a UniFi Network host such as a Cloud Gateway, Dream Machine, or Cloud Key running UniFi Network 7.2.94 or later. What are the SFP ports for? The two 1G SFP ports provide fibre or high-speed copper uplinks to a core switch or gateway. SFP modules are sold separately. Is the USW-16-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-16-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Can I rack-mount it? Yes. It is a 1U rack-mount switch and ships with SGCC steel mounting brackets for standard 19″ racks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

12MP AI Smart Intercom UniFi UVC-G6-Pro-Entry 12MP AI PoE+ Smart Intercom & Access Reader The UniFi UVC-G6-Pro-Entry is Ubiquiti’s premium AI-powered door entry system, combining a high-resolution 12MP camera, 3-inch touch display, enhanced two-way audio and integrated UniFi Access reader functionality in one sleek PoE+ device. Designed for native integration with UniFi Protect and UniFi Access, the G6 Pro Entry gives Australian homes, offices, apartments and commercial sites a more professional way to manage visitors, deliveries and secure door access from the UniFi ecosystem. Built for enterprise-style deployments, this premium UniFi smart intercom is ideal for customers who want a cleaner, more reliable and more capable alternative to consumer Wi-Fi doorbells. Camera 12MP Ultra Clear Display 3-Inch Touchscreen Integration Protect + Access Power PoE+ Wired Premium UniFi Door Entry with Built-In Smart Display The G6 Pro Entry is more than a doorbell. It is a complete UniFi door entry endpoint designed for visitor communication, AI-assisted monitoring and secure access control. The built-in display gives visitors a more polished, modern interaction point while your team manages calls, unlocks and events through UniFi Access and UniFi Protect. 12MP High-Resolution Camera Capture a sharp 3024 × 4096 portrait image with a wide 176.4° diagonal field of view for premium front-door visibility. 3-Inch Touch Display A bright 480 × 854 portrait touchscreen creates a more professional visitor experience at the door. UniFi Protect + UniFi Access Manage video, events, visitor workflows and access control from the UniFi ecosystem. Enterprise-Ready PoE+ Wired PoE+ power and data provides a cleaner, more reliable installation than standard Wi-Fi doorbells. Official UniFi Product Video Watch the official Ubiquiti overview covering the next generation of UniFi doorbell and access experiences, including the G6 Pro Entry. Next-Gen UniFi Doorbell and Access Experiences — Official Ubiquiti Video Enterprise-Grade UniFi Access Integration The UniFi UVC-G6-Pro-Entry is designed for sites that need more than visitor video. When deployed with compatible UniFi Access hardware, it can operate as part of a complete access control solution for offices, apartments, reception areas, warehouses and premium residential entry points. Pair it with compatible UniFi Access hardware such as UniFi Access Hubs and the UA-Intercom-Viewer to support visitor screening, two-way audio communication, remote unlock workflows and centralised access management. Live visitor video monitoring Two-way audio communication Remote door unlocking through UniFi Access Integrated access reader functionality Touch Pass support where available UniFi mobile app notifications Compatible UniFi intercom receiver workflows Centralised management through UniFi OS Professional PoE+ wired deployment For Australian commercial buyers, the G6 Pro Entry is a strong fit for locations where visitor experience, access control and video security need to feel premium, consistent and easy to manage. AI Smart Intercom for Homes, Offices & Multi-Tenant Entry Premium Homes Upgrade your front entry with a high-end PoE+ smart intercom, 12MP video and UniFi app control. Commercial Offices Create a polished visitor experience with built-in display, two-way audio and secure access workflows. Apartments & Shared Entry Suitable for managed entry points when paired with compatible UniFi Access infrastructure. Warehouses & Staff Doors Use UniFi Access to manage authorised entry, delivery points and staff-facing access doors. Technical Specifications Model UVC-G6-Pro-Entry Product Type AI PoE+ smart intercom, video doorbell and UniFi Access reader Camera Resolution 12MP, 3024 × 4096 image size Field of View 100° horizontal, 136.3° vertical, 176.4° diagonal Display 3-inch touch display Display Resolution 480 × 854 px portrait orientation Display Brightness 1000 nits typical Audio Two-way audio Integration Native UniFi Protect and UniFi Access integration Processor Quad-core Arm Cortex-A53 based chip Buttons Ring button, factory reset button and tamper switch LEDs R/G/B/W/Amber LEDs Power Method PoE+ Operating Temperature Device: -30°C to 50°C; Display: -25°C to 50°C Operating Humidity 5% to 90% non-condensing Certifications CE, FCC, IC NDAA Compliant Yes Downloads & Resources Access official UniFi resources for setup, installation and deployment guidance. UniFi G6 Pro Entry Quick Start Guide Official UniFi Tech Specs Frequently Asked Questions What is the difference between the G6 Entry and G6 Pro Entry? The G6 Pro Entry is the premium model, adding a 12MP camera and integrated 3-inch touch display for a more advanced visitor and access control experience. Does the UVC-G6-Pro-Entry work with the UA-Intercom-Viewer? Yes. When configured within a compatible UniFi Access environment, the G6 Pro Entry can be used with UniFi intercom receiver workflows including the UA-Intercom-Viewer. Can I receive notifications on the UniFi app and an intercom monitor? Yes. With the right UniFi Access configuration, doorbell calls and visitor events can be delivered to compatible UniFi mobile apps and supported UniFi intercom receiver devices. Does the G6 Pro Entry require UniFi Protect? Yes. It is designed for native use with UniFi Protect and UniFi Access, making it best suited to customers already using or planning a UniFi ecosystem. Does it need a subscription? UniFi Protect and UniFi Access are designed for local ecosystem management, so typical local recording, access and notification workflows do not require consumer-style monthly doorbell subscriptions. Can the G6 Pro Entry unlock a door? Yes, when paired with compatible UniFi Access hardware and suitable door lock hardware, it can support remote unlock and managed access workflows. Is the G6 Pro Entry suitable for commercial sites? Yes. Its PoE+ design, UniFi Access integration, 12MP camera and built-in display make it well suited to offices, apartments, reception entries and commercial access points. What else do I need for a complete setup? A complete deployment may require a UniFi console, UniFi Protect, UniFi Access, PoE+ switching, compatible UniFi Access Hub hardware and compatible electric door lock hardware. Recommended UniFi Products UniFi Access Control UniFi Protect Cameras UniFi PoE Switches Smart Intercom Systems Australian Stock Local Expert Support Fast Australia-Wide Shipping

Read more less

UniFi Access — NDAA Compliant UniFi Access G2 Reader Pro — NFC, PIN & Mobile Door Reader with 2-Way Intercom (UA-G2-Pro) The UniFi Access G2 Reader Pro is Ubiquiti's flagship door reader and video intercom in one weather-resistant unit. It unlocks via NFC card, PIN, mobile (UniFi Identity), and tap credentials, while a built-in 12 MP camera, 4.7″ touch display, microphone, and speaker turn any entrance into a full two-way video intercom with doorbell-to-unlock. Powered over a single PoE cable and managed locally through the UniFi Access app with no monthly fees, it's ideal for offices, apartments, warehouses, and commercial sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Unlock NFC / PIN / Mobile Intercom 2-Way Video Protection IP55 Weather Power Single-Cable PoE Why Choose the UniFi Access G2 Reader Pro? Multiple Ways to Unlock Empower staff and visitors with their preferred credential — NFC card or keyfob, on-screen PIN, or mobile unlock via the UniFi Identity app and BLE. One reader covers every access method your site needs. Two-Way Video Intercom A built-in 12 MP camera, microphone, and speaker turn the reader into a full video intercom. Visitors can ring the doorbell, talk to staff, and be remotely unlocked — all from the UniFi Access app. 4.7″ Capacitive Touch Display A bright 480-nit, 120 mm capacitive touchscreen guides users through PIN entry and intercom calls, with a wide camera view that works at ADA-compliant mounting heights. IP55 Indoor & Outdoor A polycarbonate-and-glass enclosure on an aluminium-alloy mount is rated IP55 for rain resistance, with a wide device operating range of −30°C to 45°C — suited to Australian entrances inside and out. Single-Cable PoE Installation One Ethernet cable carries power and data (max 6 W) back to a UniFi Access Hub — no separate power run. GbE RJ45, BLE 4.2, and NFC are all built in. UniFi Access — No Subscription Provision users, set schedules, review intercom calls, and trigger emergency lockdown from the UniFi Access app or web interface — managed locally with no monthly fees or cloud lock-in. Broad NFC Credential Support Reads MIFARE Classic, DESFire, ISO/IEC 14443A/B, 15693 and NFC Forum tags at 13.56 MHz — compatible with existing card systems and easy to roll out across a site. NDAA Compliant & UL 294 Certified Fully NDAA Section 889 compliant and certified to UL 294 and CAN/ULC-60839-11-1 — built for government, defence, and security-sensitive installations. Technical Specifications Model UA-G2-Pro (White) / UA-G2-Pro-Black Type Door access reader + 2-way video intercom Unlock Methods NFC card / keyfob, on-screen PIN, mobile (UniFi Identity), two-way intercom & doorbell Display 120 mm (4.7″) capacitive touch • 1280 × 286 px • 480 nits • portrait Camera 12 MP (3072 × 4096) sensor • 2 MP (1200 × 1600) video @ 30 FPS Field of View H: 98.6° • V: 125.7° • D: 157.8° Audio Built-in microphone and speaker (1.5 W) Connectivity BLE 4.2, NFC (13.56 MHz, read range < 30 mm) NFC Technology ISO/IEC 14443A/B, 15693, 18092 • MIFARE Classic / DESFire • NFC Forum T1T–T5T • Sony FeliCa (ID only) Network Interface (1) GbE RJ45 port Power Method PoE • 48 V DC • max 6 W • connects to UniFi Access Hub ESD / EMP Protection Air: ±15 kV, contact: ±8 kV Weatherproof Rating IP55 (indoor and outdoor use) Enclosure / Mount Polycarbonate & glass enclosure • aluminium-alloy mount Mounting Wall, gang-box (included) • angle mount, junction box (optional) Dimensions / Weight 160 × 40.4 × 40.55 mm • 136 g Operating Temperature Device: −30°C to 45°C • Display: −10°C to 45°C • 5–90% non-condensing Certifications CE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1 Compliance NDAA compliant Management UniFi Access app / web (no subscription) Colours Available White (UA-G2-Pro) / Black (UA-G2-Pro-Black) Downloads & Resources UA-G2-Pro Datasheet Installation Guide What's in the Box UniFi Access G2 Reader Pro Your choice of White (UA-G2-Pro) or Black (UA-G2-Pro-Black) finish. Mounting Hardware Wall and gang-box mount included; angle mount and junction box available separately. Documentation Quick-start and installation guide. Not Included A UniFi Access Hub, PoE source, network cable, and door lock hardware are required and sold separately. Best For Offices & Workplaces Give staff NFC, PIN, or mobile unlock while reception screens visitors over two-way video. Apartments & Multi-Tenant Doorbell-to-unlock and intercom calls let residents verify and admit visitors remotely. Warehouses & Industrial IP55 weather resistance and a rugged enclosure suit busy loading docks and side entries. Government & Secure Sites NDAA-compliant and UL 294 certified with emergency lockdown for security-sensitive facilities. Connects to a UniFi Access Hub over PoE and is managed from the UniFi Access app or web interface. Mounts to a wall or gang box out of the box; angle mount and junction-box adapters available separately. Single GbE / PoE cable carries power and data — no separate power run or electrician required. Door lock hardware (strikes, maglocks) is wired through the Access Hub and sold separately. Frequently Asked Questions How can users unlock the door? Via NFC card or keyfob, an on-screen PIN, mobile unlock through the UniFi Identity app, or by being remotely admitted over the two-way intercom. Does it require a subscription? No. UniFi Access runs locally on your UniFi host with no monthly fees or cloud subscription required. What do I need to run the G2 Reader Pro? A UniFi Access Hub (which supplies PoE and connects the door lock hardware), plus a UniFi console running the UniFi Access application. Can it be installed outdoors in Australia? Yes. It's rated IP55 for rain resistance and indoor/outdoor use, with a device operating range of −30°C to 45°C suited to Australian conditions. What NFC cards does it support? MIFARE Classic and DESFire, ISO/IEC 14443A/B and 15693, plus NFC Forum tags at 13.56 MHz — compatible with most existing card systems. Is the G2 Reader Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UA-G2-Pro is NDAA Section 889 compliant and UL 294 certified — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant UniFi Access G3 Reader Pro — Touchscreen Door Reader with Camera & Intercom (UA-G3-Pro) The UniFi Access G3 Reader Pro is Ubiquiti's flagship smart door reader — combining secure multi-method authentication, a built-in 12 MP camera, two-way video intercom, and a 4.7″ capacitive touchscreen in one weatherproof unit. Powered over a single PoE cable and managed centrally through the UniFi Access application with no subscription fees, it suits offices, apartments, education campuses, and any controlled-entry site across Australia. Available in Black (UA-G3-Pro-B) and White (UA-G3-Pro-W), with genuine Ubiquiti stock and fast Australia-wide shipping. Camera 12 MP Sensor Display 4.7″ Touch Protection IP55 Power Single-Cable PoE Why Choose the UniFi Access G3 Reader Pro? Built-In Camera & Video Intercom An integrated 12 MP camera with speaker and microphone enables two-way intercom and doorbell calls — so staff can see and speak with visitors before granting access. Multiple Secure Authentication Methods Unlock with NFC cards & key fobs, PIN code, mobile unlock, Apple/Google Wallet, BLE proximity, or Face Unlock — mix and match for true multi-factor access per user or door. 4.7″ Capacitive Touchscreen A bright 480-nit portrait touchscreen guides users through PIN entry and intercom calls, giving the door a modern, intuitive interface that's easy for staff and visitors alike. IP55 — Indoor & Outdoor Ready An IP55-rated polycarbonate-and-glass enclosure with aluminium-alloy mount and a −30°C to 45°C device range handles real Australian entryways, sheltered and exposed alike. Single-Cable PoE Installation One Ethernet run delivers power and data (max 6 W) back to a UniFi Access Hub — no separate power supply, with ESD/EMP protection built in for reliable deployments. UniFi Access — No Subscription Manage users, schedules, permissions, and access logs centrally through the UniFi Access application — no licence or monthly fees, with full local control. UL 294 Certified & NDAA Compliant Independently certified to UL 294 (Level I) and fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive installations. Technical Specifications Model UA-G3-Pro (Black: UA-G3-Pro-B / White: UA-G3-Pro-W) Authentication NFC card & key fob, PIN, Mobile Unlock, Apple/Google Wallet, BLE, Face Unlock Camera Sensor 12 MP (3072 × 4096) Video Output 2 MP, 1200 × 1600 (3:4) @ 30 FPS Field of View H: 98.6° • V: 125.7° • D: 157.8° Display 4.7″ capacitive touch, 1280 × 286 px, 480 nits, portrait Intercom Two-way intercom & doorbell • built-in microphone & speaker Connectivity BLE 4.2 • NFC 13.56 MHz (ISO/IEC 14443A/B, 15693, 18092; MIFARE; FeliCa ID) Network Interface (1) GbE RJ45 Power Method PoE • 48 V DC • max 6 W ESD/EMP Protection Air: ±15 kV • Contact: ±8 kV Weatherproof Rating IP55 • indoor & outdoor use Enclosure Polycarbonate & glass • aluminium-alloy mount Mounting Wall & gang-box (included); angle mount, junction box (optional) Dimensions / Weight 160 × 40.4 × 40.55 mm • 136 g Operating Temperature Device: −30°C to 45°C • Display: −10°C to 45°C Operating Humidity 5–90% non-condensing Certifications CE, FCC, IC, SRRC, UL 294 (Level I), CAN/ULC-60839-11-1 Compliance NDAA compliant Colours Available Black (UA-G3-Pro-B) / White (UA-G3-Pro-W) Downloads & Resources UA-G3-Pro Tech Specs Ubiquiti Installation Guide What's in the Box UniFi Access G3 Reader Pro Your choice of Black (UA-G3-Pro-B) or White (UA-G3-Pro-W) finish. Wall & Gang-Box Mount Mounting bracket, screws, and anchors included for wall or gang-box installation. Documentation Quick-start guide and installation instructions. Not Included Requires a UniFi Access Hub and a compatible electric lock/strike (sold separately). Best For Offices & Workplaces Touchscreen entry with mobile, card, and face unlock plus full access logs for staff and contractors. Apartments & Buildings Two-way video intercom and doorbell let residents verify and admit visitors at the front door. Education & Campuses Scalable multi-door management through UniFi Access with scheduled, per-user permissions. Government & Secure Sites UL 294 certified and NDAA compliant for installations where supply-chain integrity matters. Requires a UniFi Access Hub running the UniFi Access application to manage doors, users, and permissions. Connects to the Access Hub over a single PoE cable (Cat 5e minimum) for power and data. Mounts to a wall or gang box out of the box; angle and junction-box adapters available separately. Pair with a compatible electric lock or strike to complete the controlled-entry door. Frequently Asked Questions Does the G3 Reader Pro need a subscription? No. UniFi Access runs locally via a UniFi Access Hub. There are no licence or monthly subscription fees. What do I need to run it? A UniFi Access Hub (which powers the reader over PoE and manages it) plus a compatible electric lock or strike to control the door. How can people unlock the door? NFC cards and key fobs, PIN code, mobile unlock, Apple/Google Wallet, BLE proximity, and Face Unlock — you can combine methods for multi-factor access. Can it be installed outdoors in Australia? Yes. It carries an IP55 rating and is rated for indoor and outdoor use, with a −30°C to 45°C device operating range suited to Australian conditions. What's the difference between the Black and White versions? Identical specs and features — only the finish differs. Black (UA-G3-Pro-B) and White (UA-G3-Pro-W) let you match the reader to the door surround. Is the G3 Reader Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G3 Reader Pro is NDAA Section 889 compliant and UL 294 certified — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2) The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x GbE + 2x SFP PoE+ 16 Ports • 95W Switching 52 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-24-POE? 24 Gigabit Ports + 2 SFP Uplinks Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network. 16x 802.3at PoE+ — 95W Total Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability. 52 Gbps Switching Capacity A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks. Silent Fanless Design A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters. 1.3″ Touchscreen Display An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks. Advanced Layer 2 Features Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control. UniFi Network Managed Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-24-POE (UniFi Standard 24 PoE, Gen2) Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port Total PoE Availability 95W Switching Capacity 52 Gbps Non-Blocking Throughput 26 Gbps Forwarding Rate 39 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN Display 1.3″ touchscreen LCM Cooling Fanless (passive) Form Factor Rack mount (1U) Power Method Universal input 100–240V AC, 50/60 Hz Power Supply AC/DC internal, 120W Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output) Management UniFi Network (v7.2.94 and later) Enclosure SGCC steel Dimensions / Weight 442 × 200 × 44 mm • 3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing ESD Protection Air: ±16 kV • Contact: ±12 kV Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-24-POE Datasheet Ubiquiti Installation Guide Best For UniFi Networks Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller. Offices & Studios Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces. Retail & Hospitality Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit. SOHO Racks Compact 1U depth and a touch display suit small server cabinets and comms cupboards. Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host. 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget. Two 1G SFP ports accept fibre or DAC uplinks into your core network. Mounts in a standard 1U rack; fanless design needs no special ventilation. Frequently Asked Questions How many PoE ports does the USW-24-POE have? Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch. Does it require a separate controller? It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees. Is it fanless? Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments. What are the SFP ports for? The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core. Is the USW-24-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect G4 Doorbell Pro PoE Kit (White) — Dual-Camera PoE Video Doorbell (UVC-G4 Doorbell Pro PoE Kit) The UniFi Protect G4 Doorbell Pro PoE Kit is Ubiquiti's flagship video doorbell — a dual-camera intercom with a forward-facing main camera plus a downward package-detection camera, a programmable colour display, two-way audio, and AI event detection, all powered over a single PoE cable. The kit bundles the doorbell with a UP-Chime PoE for plug-and-play installation. Recording locally through UniFi Protect with no monthly fees, it's ideal for homes, offices, and apartments anywhere in Australia. Supplied in White with genuine Ubiquiti stock and fast Australia-wide shipping. Cameras Dual (Main + Package) Night Vision IR + IR Cut Audio 2-Way Power Single-Cable PoE Why Choose the UniFi Protect G4 Doorbell Pro PoE Kit? Dual-Camera Coverage A 5 MP main camera watches visitors face-on with a wide field of view, while a dedicated 8 MP downward package camera keeps an eye on parcels left at your doorstep — coverage a single-lens doorbell can't match. Programmable Welcome Display A built-in colour screen shows a programmable welcome message or status to visitors, adding a polished, customisable touch to your entrance. AI Event Detection On-device AI flags meaningful events so you're alerted to what matters at the door — cutting nuisance notifications and helping you respond faster. Improved HDR & Low-Light Enhanced HDR processing plus built-in IR illumination and an IR cut filter deliver clear footage day and night, even in harsh backlight at the doorstep. Two-Way Audio Integrated microphone and speaker let you talk to visitors and couriers from the UniFi Protect app — answer the door from anywhere. Includes UP-Chime PoE The kit bundles a PoE-powered chime so the doorbell rings indoors out of the box — no separate transformer or existing chime wiring required. Single-Cable PoE Installation One Ethernet cable carries both power and data to the doorbell (max 7 W) over its Gigabit RJ45 port — no doorbell transformer, no separate power run. UniFi Protect — No Subscription Live view, recordings, AI alerts, and settings are managed through the UniFi Protect app or web interface — full local control with no monthly fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive sites where supply-chain integrity is required. Technical Specifications Model UVC-G4 Doorbell Pro PoE Kit (White) — includes UVC-G4 Doorbell Pro + UP-Chime PoE Main Camera Sensor 5 MP CMOS Package Camera Sensor 8 MP CMOS Lens Fixed focal length (both cameras) Video Resolution Main: 2 MP, 1600 × 1200 (4:3) • Package: 2 MP, 1600 × 1200 (4:3) Max. Frame Rate 30 FPS Field of View (Main) H: 160° • V: 117° • D: 160° (LDC off) • H: 138°/V: 114°/D: 155° (LDC on) Field of View (Package) H: 97.5° • V: 79.4° • D: 118.2° Night Mode Built-in IR LED illumination + IR cut filter Display Programmable welcome display AI / Smart Detection AI event detections (UniFi Protect) Audio Microphone + speaker (2-way) • UP-Chime PoE buzzer Weatherproofing IPX4 (UVC-G4 Doorbell Pro) Network Interface Doorbell: GbE RJ45 • UP-Chime PoE: 10/100 MbE Power Method PoE • Doorbell: 37–57 V DC, max 7 W • Chime: 44–57 V DC, max 3.5 W Processor Quad-core Arm® Cortex®-A53 Buttons (1) Ring button • (1) Factory reset Enclosure Aluminium alloy & polycarbonate Dimensions / Weight Doorbell: 160.6 × 51.7 × 35.1 mm, 264 g • Chime: ⌀62 × 54 mm, 158 g Operating Temperature Doorbell: −30°C to 40°C • Chime: 0°C to 40°C Operating Humidity Doorbell: 0–90% • Chime: 10–90% non-condensing Software UniFi Protect • UniFi Protect app for iOS™ & Android™ Certifications CE, FCC, IC Compliance NDAA compliant Colour White Downloads & Resources UVC-G4 Doorbell Pro Datasheet Ubiquiti Installation Guide What's in the Box UVC-G4 Doorbell Pro (White) Dual-camera PoE video doorbell with programmable display and ring button. UP-Chime PoE PoE-powered indoor chime so the doorbell rings without a transformer. Mounts & Hardware Wall mount, wedge, on-wall mount, and chime mounts with fixings included. Not Included A PoE switch/injector and network cabling are required and sold separately. Best For Homes & Front Doors See visitors face-on and watch parcels left on the doorstep with the dedicated package camera. Apartments & Units Two-way audio and a programmable display make a polished, secure entrance for residents. Offices & Reception Local UniFi Protect recording with AI alerts — answer the door from any UniFi Protect device. UniFi Sites Drops into an existing UniFi Protect deployment over a single PoE cable with the included chime. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, or Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any 802.3af/at PoE switch — pair with a UniFi PoE switch for single-pane management. Included UP-Chime PoE provides the indoor ring — no doorbell transformer or existing chime wiring needed. Mounts flush, angled (wedge), or on-wall using the included brackets. Frequently Asked Questions Does the G4 Doorbell Pro require a UniFi Protect subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run this doorbell kit? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the doorbell and included chime. What does the second camera do? The downward-facing 8 MP package camera monitors parcels and the area directly below the doorbell, complementing the forward-facing 5 MP main camera. Is the chime included? Yes. The kit bundles a UP-Chime PoE that powers over Ethernet, so the doorbell rings indoors without a transformer or existing chime wiring. Is it weatherproof for Australian conditions? The doorbell is rated IPX4 for water resistance and operates from −30°C to 40°C. It's best installed in a covered or sheltered doorway position. Is the G4 Doorbell Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant Ubiquiti UVC-G4 Doorbell Pro PoE Kit — UniFi Protect Dual-Camera Video Doorbell with PoE Chime The UniFi Protect G4 Doorbell Pro PoE Kit is Ubiquiti's premium PoE video doorbell — pairing a wide-angle main camera with a dedicated secondary package-detection camera, a programmable display, two-way audio, and an included PoE Chime for plug-and-play installation. With improved HDR and low-light performance, on-device AI event detection, and full UniFi Protect integration over a single PoE cable, it secures any front door, office, or retail entry across Australia with no monthly fees. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Cameras Dual 2MP FHD Night Vision IR 6 m Protection IPX4 Power Single-Cable PoE Why Choose the G4 Doorbell Pro PoE Kit? Dual-Camera Design A wide 2MP main camera covers visitors face-to-face, while a dedicated 2MP secondary package-detection camera watches the doorstep below — so deliveries are never out of frame. AI Event Detection On-device AI detects people, vehicles, and animals in real time, cutting nuisance alerts so you only get notified about what actually matters at your door. Programmable Welcome Display An integrated colour display greets visitors with custom messages, while improved HDR and low-light performance keeps faces clear day and night. Two-Way Audio & Intercom Built-in two-way audio lets you speak with visitors from the UniFi Protect app, with full two-way intercom and doorbell access support across your UniFi system. Included PoE Chime The kit ships with a PoE Chime featuring an R/G/B/W LED, speaker, and buzzer — plug it into any PoE port for an instant in-home doorbell tone, no wiring rework required. NFC Card & Keyfob Access Integrated NFC support enables card and keyfob tap access, bringing simple door entry alongside live video right at the doorbell. Single-Cable PoE Installation One Ethernet cable delivers power and data (max 7 W) — no separate power run and no transformer. Works with any standard PoE switch or UniFi PoE switch. UniFi Protect — No Subscription Manage live views, recordings, AI alerts, and chimes through the UniFi Protect app or web interface — no monthly fees, no cloud dependency, full local control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. See It in Action G4 Doorbell Pro PoE Kit — installation walkthrough Technical Specifications Model UVC-G4 Doorbell Pro PoE Kit Resolution Main & package cameras: 2MP FHD — 1600 × 1200 (4:3) @ 30 FPS Image Sensors Main: 5MP CMOS • Package: 8MP CMOS Lens Fixed focal length Field of View Main: H 138° / V 114° / D 155° (LDC On) • Package: H 97.5° / V 79.4° / D 118.2° Night Vision Built-in IR LED illumination + IR cut filter, up to 6 m (20 ft) AI / Smart Detection People, vehicles, animals Audio Two-way audio Access Control NFC card & keyfob access • two-way intercom & doorbell access Weatherproof Rating IPX4 Network Interface GbE RJ45 port Power Method PoE • 37–57 V DC • max 7 W Processor Quad-core Arm® Cortex®-A53 Mounting Wall, wedge (included); gang box, junction box (optional) Enclosure Polycarbonate & aluminium alloy Dimensions / Weight 160.6 × 51.7 × 35.1 mm • 264 g Operating Temperature −30°C to 40°C, 0–90% non-condensing PoE Chime 10/100 MbE PoE • max 3 W • R/G/B/W LED, speaker & buzzer • ⌀62 × 54 mm Certifications CE, FCC, IC, SRRC Compliance NDAA compliant Downloads & Resources UVC-G4 Doorbell Pro Datasheet Ubiquiti Installation Guide What's in the Box G4 Doorbell Pro The dual-camera PoE video doorbell with integrated display. PoE Chime In-home PoE chime with R/G/B/W LED, speaker, and buzzer. Mounting Hardware Flat wall mount and 20° wedge mount included; gang/junction box adapters optional. Not Included A PoE switch/injector and network cable are required and sold separately. Best For Homes & Front Doors See visitors face-to-face and keep an eye on doorstep deliveries with the second package camera. Retail & Reception Two-way intercom and a programmable welcome display greet customers and staff at the entrance. Offices & Buildings NFC card and keyfob access pairs door entry with live video, all inside UniFi Protect. Apartments & Villas Single-cable PoE install with a tidy included chime — no transformer or doorbell wiring rework. Requires a UniFi Protect host (UNVR, UNVR Pro, Cloud Key Gen2 Plus, Dream Machine Pro/SE/Wall) running UniFi Protect. Powered by any standard PoE switch — pair with a UniFi PoE switch for single-pane management. Mounts to wall or 20° wedge out of the box; gang-box and junction-box adapters available separately. Included PoE Chime plugs into any PoE port for an in-home doorbell tone. Frequently Asked Questions Does the G4 Doorbell Pro require a subscription? No. UniFi Protect runs locally on a UniFi NVR or Dream Machine. There are no monthly fees or cloud subscriptions required. What do I need to run it? A UniFi Protect host — such as a UNVR, Cloud Key Gen2 Plus, or a UniFi Dream Machine Pro/SE/Wall — plus a PoE switch to power the doorbell and chime. What is the second camera for? The secondary package-detection camera points down at the doorstep so parcels and deliveries stay in frame, even when they are below the main camera's view. Is the PoE Chime included? Yes. This kit includes the PoE Chime, which provides an in-home doorbell tone with an R/G/B/W status LED, speaker, and buzzer. Is it suitable for outdoor use in Australia? Yes, when mounted in a covered location. It carries an IPX4 rating and a −30°C to 40°C operating range suited to Australian conditions. Is the G4 Doorbell Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the G4 Doorbell Pro PoE Kit is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UDM-SE — UniFi Dream Machine Special Edition All-in-One UniFi OS Console with 8-Port PoE, Dual 10G SFP+ & Protect NVR The UniFi Dream Machine Special Edition (UDM-SE) is Ubiquiti's flagship all-in-one UniFi OS Console — combining an enterprise security gateway, a built-in 8-port PoE switch, the UniFi Network controller, and a UniFi Protect NVR in a single 1U rack-mount unit. With 3.5 Gbps IDS/IPS routing, dual 10G SFP+, a 3.5″ NVR HDD bay, a built-in 128 GB SSD, and a 1.3″ touchscreen, it replaces a gateway, switch, controller, and NVR for professional homes, small businesses, and commercial sites across Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. PoE Ports 8-Port PoE IDS/IPS Routing 3.5 Gbps NVR Storage 3.5″ HDD + 128 GB SSD PoE Budget 180W Why Choose the UniFi Dream Machine SE? 8-Port Built-in PoE — 180W Budget Power and connect UniFi cameras, access points, and PoE devices directly from the UDM-SE — no separate PoE switch required. Eight Gigabit RJ45 ports deliver up to 15.4W (PoE) or 30W (PoE+) per port within a total 180W budget. 3.5 Gbps IDS/IPS Routing Enterprise threat management with a stateful firewall, application-aware Layer 7 firewall, DPI, content filtering, ad blocking, and intrusion prevention — backed by 55,000+ IDS/IPS signatures with CyberSecure, all at 3.5 Gbps. Dual 10G SFP+ & 2.5 GbE WAN Two 10G SFP+ ports (one default 10G WAN, one for high-speed LAN uplink) plus a 2.5 GbE RJ45 WAN port give you flexible, future-proof ISP and core-switch connectivity. Built-in UniFi Protect NVR The single 3.5″ SATA HDD bay enables full UniFi Protect camera recording locally on the unit, while the integrated 128 GB SSD accelerates the experience and event retrieval. Records up to (8) 4K, (14) 2K, or (24) HD cameras. 1.3″ Touchscreen Display Monitor system status, network health, PoE activity, and storage directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Full UniFi Application Suite Runs UniFi Network, Protect, Access, Talk, and Connect out of the box — supporting 100+ UniFi devices and 1,000+ simultaneous clients with no separate cloud key, controller, or NVR hardware. Advanced VPN & License-Free SD-WAN WireGuard, OpenVPN, L2TP and IPsec VPN servers/clients, Teleport zero-config VPN, Site Magic site-to-site, plus licence-free SD-WAN — all built in with no additional licensing. Redundancy & NDAA Compliant Shadow Mode (VRRP) gateway failover and USP-RPS DC power backup keep critical sites online. Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations. UDM-SE vs UDM-Pro — Which Should You Choose? Choose UDM-SE if you need… Built-in PoE to power cameras and APs directly, a 180W PoE budget, a 128 GB SSD, and a 1.3″ touchscreen. Best where the UDM-SE replaces both a gateway and a PoE switch. Choose UDM-Pro if you need… Pure routing/gateway performance with dual 10G SFP+ and no built-in PoE. Best where a separate managed PoE switch is already in place. Technical Specifications Model UDM-SE Form Factor 1U rack-mount Processor Quad-core ARM® Cortex®-A57 @ 1.7 GHz System Memory 4 GB On-board Storage 16 GB eMMC + 128 GB SSD (integrated) LAN / PoE Ports 8 × 1 GbE RJ45 (PoE / PoE+) • 1 × 10G SFP+ WAN Ports 1 × 2.5 GbE RJ45 • 1 × 10G SFP+ (max. 8 WAN) PoE Budget 180W total (PoE: 15.4W/port • PoE+: 30W/port) PoE Voltage PoE: 44–57V • PoE+: 50–57V IDS/IPS Throughput 3.5 Gbps (55,000+ signatures with CyberSecure) NVR Storage 1 × 3.5″ SATA HDD bay (drive not included) + 128 GB SSD Managed Cameras (8) 4K • (14) 2K • (24) HD Managed UniFi Devices 100+ • 1,000+ simultaneous clients Display 1.3″ touchscreen Power Method Universal AC 100–240V AC, 4.4A max, 50/60 Hz • USP-RPS DC input 52V DC Power Supply Internal AC/DC, 240W Max. Power Consumption 50W (excluding PoE output) Redundancy Shadow Mode (VRRP) gateway failover • DC power backup Dimensions 442.4 × 43.7 × 285.6 mm Weight 5 kg Enclosure Aluminium CNC, SGCC steel Operating Temperature −10°C to 40°C, 5–95% non-condensing Management UniFi OS • UniFi app (iOS/Android) • Web UI Certifications CE, FCC, IC, Anatel, SRRC Compliance NDAA compliant Downloads & Resources UDM-SE Datasheet UDM-SE Installation Guide What's in the Box UDM-SE Unit All-in-one UniFi OS Console with 8-port PoE, dual 10G SFP+, and pre-installed UniFi Network and UniFi Protect. Rack-Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included 3.5″ HDD for UniFi Protect storage, cameras, and the USP-RPS power backup are sold separately. Best For Small & Medium Business Replace gateway, PoE switch, controller, and NVR with one UDM-SE — ideal for offices, retail, and professional firms. Advanced Home Networks Enterprise routing, IDS/IPS, PoE for cameras and APs, and UniFi Protect recording from one rack-mount unit. UniFi Protect Camera Systems Power up to 8 UniFi cameras directly from the built-in PoE ports and record locally via the HDD bay. Multi-WAN & Failover Dual-WAN failover and load balancing across 10G SFP+ and 2.5 GbE WAN, plus UniFi LTE backup support. 1U rack-mount console — mounts in any standard 19″ rack with the included brackets. Add a 3.5″ surveillance-grade SATA HDD (e.g. WD Purple or Seagate SkyHawk) for UniFi Protect recording. Power up to 8 PoE/PoE+ devices directly; expand with a UniFi PoE switch for larger camera counts. Optional USP-RPS provides DC power backup and redundancy for critical deployments. Frequently Asked Questions Does the UDM-SE require a UniFi subscription? No. UniFi Network and UniFi Protect run fully locally on the UDM-SE. There are no monthly fees or cloud subscriptions required for full functionality. How many cameras can the UDM-SE power directly? Up to 8 cameras via the built-in PoE ports, subject to the 180W total PoE budget. It can manage up to (8) 4K, (14) 2K, or (24) HD UniFi cameras. What is the difference between the UDM-SE and UDM-Pro? The UDM-SE adds 8 built-in PoE ports (180W budget), a 128 GB SSD, and a 1.3″ touchscreen. The UDM-Pro has no built-in PoE and suits pure routing deployments with a separate managed switch. What hard drive do I need for UniFi Protect? Any compatible 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording reliability. The drive is not included. Does it support dual-WAN failover? Yes. The UDM-SE supports dual-WAN failover and load balancing across the 2.5 GbE RJ45 WAN and 10G SFP+ WAN ports, plus UniFi LTE backup. Is the UDM-SE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UDM-SE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant UniFi Access G3 Starter Kit Pro — Single-Door Entry & Exit Control with Camera Reader (UA-G3-SK-Pro) The UniFi Access G3 Starter Kit Pro (UA-G3-SK-Pro) is a complete, licence-free access control solution for a single door — with full entry and exit control built in. It pairs a PoE++ Door Hub with two readers: the premium G3 Reader Pro (integrated camera, two-way intercom, 4.7″ touchscreen and Face Unlock) for the entry side, and a compact G3 Reader for the exit side, plus two Pocket Keyfobs to get you started. Whether you're securing an office, reception, server room, or commercial entry anywhere in Australia, this kit delivers enterprise-grade access control with no recurring licence fees — managed entirely through the UniFi Access app. Genuine Ubiquiti stock with fast Australia-wide shipping. Coverage 1 Door — Entry & Exit Reader Pro Camera + Intercom Access NFC · Wallet · PIN · BLE Power PoE++ — No Licence Fees Why Choose the UniFi Access G3 Starter Kit Pro? Complete Entry & Exit Control The kit includes two readers — a G3 Reader Pro for the entry side and a G3 Reader for the exit side — so you get full in/out access control for one door straight out of the box, no extra hardware needed. G3 Reader Pro with Camera & Intercom The flagship G3 Reader Pro features an integrated camera, two-way intercom & doorbell, a 4.7″ capacitive touchscreen, and a 12 MP optics module for visual verification of every visitor. Multiple Ways to Unlock Grant access via NFC cards & keyfobs, Apple/Google Wallet, PIN, mobile BLE, and Face Unlock on the Reader Pro — flexible credentials for staff, visitors, and contractors. PoE++ Door Hub A single PoE++ Door Hub powers and manages both readers, lock relays, exit buttons, and door sensors — with four PoE outputs and DIN-rail mounting for a clean install. UniFi Access — No Subscription Configure users, permissions, schedules, and access logs from the UniFi Access app or web portal — there are no monthly fees, no per-door licences, and no cloud lock-in. Indoor & Outdoor Ready Both readers are IP55-rated for indoor and outdoor use, with ESD/EMP protection and a wide operating range — suitable for sheltered exterior entries across Australian conditions. Touch Pass Included The kit ships with 10 free 1-year Touch Passes for fast, secure phone-tap access — plus two Pocket Keyfobs to get the door running on day one. NDAA Compliant Every component is NDAA Section 889 compliant, making the kit suitable for government, defence, and security-sensitive installations with supply-chain requirements. Technical Specifications Kit SKU UA-G3-SK-Pro In the Box (1) Door Hub • (1) G3 Reader Pro • (1) G3 Reader • (2) Pocket Keyfobs Supported Doors 1 (entry & exit) Touch Pass 10 free 1-year Touch Passes included Maximum User Count 6,000 (Door Hub) Hub Power Method PoE++ input (50V DC, 1A) • (4) PoE outputs, 30W per port (45W aggregated) Hub Networking (5) 10/100/1000 Base-T Hub Inputs / Relays Exit request, door position, emergency • dry & powered lock/aux relays Hub Mounting DIN-rail (included) G3 Reader Pro Access NFC, Apple/Google Wallet, PIN, Mobile BLE, Face Unlock G3 Reader Pro Camera Integrated camera • 12 MP optics (3072 × 4096) • H 98.6° / V 125.7° / D 157.8° G3 Reader Pro Display 4.7″ capacitive touchscreen, 480 nits, 1280 × 286 px (portrait) G3 Reader Pro Intercom Two-way intercom & doorbell • microphone & 1.5W speaker G3 Reader Access NFC card & keyfob, Apple/Google Wallet, Mobile Unlock, handwave request-to-exit Reader Connectivity BLE + NFC (13.56 MHz) Reader Weatherproofing IP55 • indoor & outdoor use Reader Power PoE • Reader Pro max 6W • G3 Reader max 5W Operating Temperature Hub 0°C to 40°C • Readers −30°C to 45°C Management UniFi Access app & web portal (no licence/subscription fees) Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Compliance NDAA compliant Downloads & Resources UA-G3-SK-Pro Tech Specs Installation Guide What's in the Box UniFi Access Door Hub PoE++ controller for one door — powers both readers, lock relays, exit buttons, and sensors. DIN-rail mountable. G3 Reader Pro Premium entry-side reader with camera, two-way intercom, 4.7″ touchscreen, and Face Unlock. G3 Reader Compact exit-side reader supporting NFC, Wallet, mobile unlock, and handwave request-to-exit. 2 × Pocket Keyfobs + Hardware Two NFC keyfobs plus mounting hardware and a quick-start guide. Not included: electric/magnetic lock hardware is sold separately. Best For Offices & Receptions Visual verification at the front door with intercom and Face Unlock, plus easy exit control inside. Server & Comms Rooms Restrict access to sensitive areas with audit logs and multi-factor credentials — no licence fees. Commercial Buildings Manage staff, contractors, and visitors centrally through the UniFi Access app or web portal. Multi-Door Rollouts Start with one door, then scale by adding more hubs, readers, and credentials over time. Requires a UniFi Access host (UNVR or UniFi gateway running UniFi Access) for management and recording. Door Hub is powered by PoE++ and powers both readers over PoE — pair with a UniFi PoE switch for single-pane management. Electric or magnetic lock hardware is required and sold separately — choose based on your door type. Reader Pro mounts to wall/gang-box; angle and junction-box adapters are available separately. Frequently Asked Questions What's included in the UA-G3-SK-Pro kit? One UniFi Access Door Hub, one G3 Reader Pro (with camera & intercom), one G3 Reader, and two Pocket Keyfobs — enough for full entry and exit control of a single door. Does it require a subscription? No. UniFi Access is a licence-free platform managed locally through the UniFi Access app or web portal — there are no monthly or per-door fees. What unlock methods are supported? NFC cards & keyfobs, Apple/Google Wallet, PIN, mobile BLE, and Face Unlock (on the G3 Reader Pro). Touch Pass phone-tap access is also included. Do I need anything else to run it? You'll need a UniFi Access host (a UNVR or UniFi gateway running UniFi Access) plus electric or magnetic lock hardware, which is sold separately. Can it be used outdoors in Australia? Both readers are IP55-rated for indoor and outdoor use with ESD/EMP protection, suitable for sheltered exterior entries in Australian conditions. Is the kit NDAA compliant? Yes. Every component is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ (UNVR-Pro) The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Up to 60 Days Retention Install up to seven 2.5″ or 3.5″ SATA drives for massive local storage capacity — enough for up to 60 days of continuous footage from 20 × 4K cameras or 60 × Full HD cameras. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Up to 60 days (configuration dependent) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis Compliance NDAA compliant Downloads & Resources UNVR Pro Datasheet Installation Guide What's in the Box UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. Rack Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Best For Large Commercial & Enterprise Sites Factories, warehouses, and logistics hubs needing enterprise-grade recording capacity with RAID redundancy. Schools, Universities & Campuses Multi-building campuses where long retention, high camera counts, and reliable RAID storage are non-negotiable. Office Towers & Strata Complexes High-rise offices and strata complexes with server-room infrastructure and large camera deployments. Maximum-Scale UniFi Protect Systems The top-tier UniFi Protect NVR for deployments needing maximum storage, RAID protection, and enterprise uplink speeds. Mounts in any standard 2U rack space — server rooms, comms cabinets, and data centres. Pair with a UniFi PoE switch to power and manage cameras from a single pane of glass. Use surveillance-grade SATA drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording. Add a USP-RPS Power Backup for power redundancy on critical installs. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives such as WD Purple Pro or Seagate SkyHawk AI. Check Ubiquiti's HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What's the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Is the UNVR Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UNVR Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Access — NDAA Compliant UniFi G3 Gate Starter Kit — Gate Access Control with Camera & Intercom (UA-G3-SK-Gate) The UniFi G3 Gate Starter Kit (UA-G3-SK-Gate) is a complete, licence-free gate access control package built around the UniFi Access Gate Hub and the premium G3 Intercom with built-in 8 MP camera, 7″ touchscreen, and two-way audio. Designed for sliding gates, swing gates, boom gates, and controlled entry points, it supports mobile unlock, NFC cards, PIN, Apple/Google Wallet, and Face Unlock — all managed locally through UniFi Access with no monthly fees. Whether you're securing a strata complex, warehouse, gated community, or campus anywhere in Australia, this kit delivers enterprise-grade entry control with genuine Ubiquiti stock and fast Australia-wide shipping. Verification Camera + Intercom Display 7″ Touchscreen Access NFC / BLE / PIN Power PoE++ Powered Why Choose the UniFi G3 Gate Starter Kit? Complete Single-Gate Kit Everything needed to control one gate plus one side door out of the box — Gate Hub, G3 Intercom, PoE++ adapter, and two 2-wire Retrofit Extenders for fast deployment on new or existing cabling. G3 Intercom — See & Speak to Visitors An integrated 8 MP camera, two-way audio doorbell, and 7″ capacitive touchscreen let staff or residents visually verify and grant access to visitors directly from the UniFi Access app or console. Flexible, Secure Authentication Unlock by NFC card & keyfob, mobile BLE, PIN, Apple/Google Wallet, or Face Unlock. Lost credentials can be revoked instantly — no need to change locks or rewire. Gate Hub — Reliable Control The PoE++ Gate Hub drives gate operators via dry-contact relays and manages exit requests, gate-position sensors, side-door locks, and an emergency input. Supports up to 6,000 users with DIN-rail mounting. Built for the Outdoors The G3 Intercom is rated IP65 with an aluminium-alloy and glass body and a wide −30°C to 60°C range — ready for tough Australian gate and perimeter environments. 10 Free Touch Passes Included The kit ships with 10 free 1-year Touch Passes, making it easy to roll out tap-to-enter mobile credentials for staff, tenants, or residents from day one. UniFi Access — No Subscription Manage doors, users, schedules, and live monitoring through the UniFi Access app or web console — fully local, with no licence or monthly fees and no cloud lock-in. NDAA Compliant All components are fully NDAA Section 889 compliant and carry UL 294 access-control certification — suitable for government, defence, and security-sensitive sites. Technical Specifications Kit SKU UA-G3-SK-Gate (UniFi G3 Gate Starter Kit) In the Box (1) Gate Hub • (1) G3 Intercom • (1) PoE++ Adapter (U-PoE++) • (2) 2-Wire Retrofit Extenders Touch Pass 10 free 1-year Touch Passes included Authentication NFC card & keyfob, mobile BLE unlock, PIN, Apple/Google Wallet, Face Unlock Intercom Camera 8 MP (2448 × 3264) • video 2 MP 1200 × 1600 @ 30 FPS Intercom Field of View H: 79.4° • V: 97.5° • D: 118.2° Display 7″ (177 mm) capacitive multi-touch, 1024 × 600, up to 1000 nits Intercom Connectivity BLE 4.2 • NFC 13.56 MHz • (1) GbE RJ45 Intercom Weatherproofing IP65 • aluminium alloy, polycarbonate & glass Gate Hub Doors 1 gate + 1 side door • up to 6,000 users Gate Hub Relays (2) operator + (1) aux dry relays, 30V DC up to 1A • (1) powered side-door lock 12V DC up to 1A Gate Hub Networking (5) 10/100/1000 Base-T • (1) PoE++ input, (4) PoE outputs (30W/port, 55W max aggregate) Power Method PoE++ • included U-PoE++ adapter, 48V DC @ 1.25A, 100–240V AC input Mounting Intercom: wall / gooseneck pedestal • Gate Hub: DIN-rail (included) Operating Temperature −30°C to 60°C, 5–90% non-condensing Management UniFi Access app & web console (licence-free) Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Compliance NDAA compliant Downloads & Resources UA-G3-SK-Gate Tech Specs Installation Guide What's in the Box 1 × UniFi Access Gate Hub PoE++ controller with gate-operator relays, sensor inputs, and a 5-port Gigabit switch with PoE output. 1 × G3 Intercom Outdoor-rated reader with 8 MP camera, 7″ touchscreen, NFC/BLE/PIN, and two-way audio. 1 × PoE++ Adapter + 2 × Retrofit Extenders U-PoE++ power adapter plus two 2-wire Retrofit Extenders for powering and connecting over existing cabling. Not Included Gate motor/operator, electric strike or magnetic lock, lock wiring, and a network switch are sold separately. Best For Strata & Apartments Visual visitor verification and mobile unlock for residents across gated complexes — no shared keys. Warehouses & Logistics Control vehicle and pedestrian gates with relay outputs, exit requests, and full activity logging. Gated Communities Touch Pass and Face Unlock give homeowners fast, secure entry while keeping visitors managed. Schools & Campuses Up to 6,000 users with instant credential revocation and centralised, licence-free management. Requires a UniFi Access host (UNVR, Cloud Key Gen2 Plus, or compatible UniFi gateway) running UniFi Access. Gate Hub is powered by the included U-PoE++ adapter; mount on the supplied DIN-rail inside a junction box for outdoor sites. G3 Intercom mounts to a wall or gooseneck pedestal; surface-angle, flush-mount, and sunshield kits are available separately. Connect your gate operator's dry-contact input to the Gate Hub relay; gate motor and lock hardware are not included. Frequently Asked Questions What's included in the UA-G3-SK-Gate kit? One Gate Hub, one G3 Intercom, one PoE++ adapter, and two 2-wire Retrofit Extenders — plus 10 free 1-year Touch Passes. Does this kit require a subscription? No. UniFi Access is licence-free and runs locally on a UniFi host with no monthly or per-door fees. How do people unlock the gate? By NFC card or keyfob, mobile BLE unlock, PIN, Apple/Google Wallet, or Face Unlock — and remotely from the UniFi Access app. Can it control vehicle gates? Yes. The Gate Hub provides dry-contact operator relays to trigger sliding, swing, and boom gate motors, plus exit-request and gate-position inputs. Is the intercom suitable for outdoor use in Australia? Yes. The G3 Intercom is IP65-rated with an aluminium and glass body and operates from −30°C to 60°C, suiting Australian outdoor gate environments. Is the kit NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and every component is NDAA Section 889 compliant with UL 294 certification — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch with Touch Display (USW-Pro-48-PoE) The UniFi Switch Pro 48 PoE (USW-Pro-48-PoE) is a fully managed Layer 2 / Layer 3 access-layer switch built for demanding UniFi networks. It pairs (40) Gigabit PoE+ RJ45 ports, (8) Gigabit PoE++ RJ45 ports, and (4) 10G SFP+ uplinks with advanced routing — inter-VLAN routing, static routing, and a built-in DHCP server. With up to 600W of total PoE, a 1.3″ colour touchscreen, USP RPS power-redundancy input, and near-silent cooling, it's the ideal aggregation point for offices, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48x GbE + 4x 10G SFP+ PoE Budget 600W Total Switching Layer 2 + Layer 3 Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48 PoE? 48 Gigabit PoE Ports Power and connect up to 48 devices over a single cable each — (40) GbE PoE+ ports for APs, cameras, and phones, plus (8) GbE PoE++ (802.3bt) ports for high-draw devices like PTZ cameras and multi-radio access points. 600W Total PoE Budget A generous 600W PoE supply drives a full rack of powered devices, with USP RPS redundant-power input support to keep critical infrastructure online during a power-supply fault. Layer 3 Routing Built In Beyond a rich Layer 2 feature set, the Pro 48 PoE adds inter-VLAN routing, static routing, and a DHCP server — offload routing from your gateway and segment networks right at the access layer. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth uplinks and aggregation to the core, eliminating bottlenecks between switches, servers, and storage. 1.3″ Colour Touch Display An onboard 1.3″ LCM colour touchscreen with AR switch management surfaces port status, throughput, and uptime at a glance — no laptop required at the rack. Managed in UniFi Network Configure and monitor from anywhere through the powerful UniFi Network web and mobile app. Near-silent cooling keeps it quiet enough for offices and comms rooms alike. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Pro-48-PoE (Gen2) Management Fully managed, Layer 2 + Layer 3 PoE+ RJ45 Ports (40) GbE, 802.3at PoE+ PoE++ RJ45 Ports (8) GbE, 802.3bt PoE++ SFP+ Ports (4) 10G SFP+ Total PoE Power 600W Power Redundancy (1) USP RPS DC input Display 1.3″ LCM colour touchscreen with AR switch management Layer 3 Features Inter-VLAN routing, static routing, DHCP server Cooling Near-silent active cooling Management Software UniFi Network application, version 5.10.5 and later Compliance NDAA compliant Downloads & Resources USW-Pro-48-PoE Datasheet Ubiquiti Quick Start Guide Best For Offices & Workplaces Powers desk phones, APs, and cameras across a floor with PoE+ and PoE++ headroom to spare. Retail & Hospitality VLAN-segment guest, POS, and CCTV traffic with Layer 3 routing handled at the switch. CCTV Aggregation 48 PoE ports plus 10G SFP+ uplinks to a UniFi NVR make it an ideal camera access switch. Comms Rooms Near-silent cooling, a touch display, and USP RPS redundancy suit always-on infrastructure. Adopt and manage with the UniFi Network application (version 5.10.5 or later) via a UniFi gateway or Cloud Key. Mixes 802.3at PoE+ and 802.3bt PoE++ ports — check device draw against the 600W total budget. Add a UniFi SmartPower RPS (USP RPS) via the DC input for redundant-power protection. Use the (4) 10G SFP+ ports for high-bandwidth uplinks or aggregation to the network core. Frequently Asked Questions How much PoE power does the USW-Pro-48-PoE provide? It supplies up to 600W of total PoE across its 48 ports — (40) 802.3at PoE+ ports and (8) 802.3bt PoE++ ports for higher-draw devices. Does this switch support Layer 3 routing? Yes. It's a fully managed Layer 2 + Layer 3 switch with inter-VLAN routing, static routing, and a built-in DHCP server. What do I need to manage it? The UniFi Network application (version 5.10.5 or later), running on a UniFi gateway, Dream Machine, or Cloud Key. Configure and monitor from the web or mobile app anywhere. Can I add power redundancy? Yes. The USP RPS DC input lets you connect a UniFi SmartPower Redundant Power System to keep the switch running through a power-supply fault. What are the 10G SFP+ ports for? The four 10G SFP+ ports are high-bandwidth uplinks — ideal for aggregating to the core, linking switches, or connecting to a UniFi NVR or server. Is the USW-Pro-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less