RJ45 Network Crimp Thru Tool AC-EZ4500 The RJ45 Network Crimp Thru Tool AC-EZ4500 allows you to easily terminate Cat5e and Cat6 pass through modular plugs, saving time and effort. With its one-motion crimping and wire cutting capabilities, this tool secures the crimp and cuts the wires to the required length. Perfect for use with pass through plugs, this tool streamlines the process of creating strong and reliable network connections. Features Terminate Cat5e and Cat6 pass through modular plugs Cuts the wires to the required length while securing the crimp in one motion Pass through plugs required for the wires to be cut

Read more less

Zeal 12VDC 7AH (C20) SLA Battery F1 Terminal The SA12V7, 12V 7Ah (C20) is part of the ZEAL range of Sealed Lead Acid batteries (SLA), which often are referred to as Valve Regulated Lead Acid batteries (VRLA) or Absorbed Glass Matt batteries (AGM). The Zeal AGM Fire and Security is available in a range of sizes to suit applications in standby, recreation, UPS, Fire & Security, generators and medical equipment. Complete with CSIRO ActivFire Certification, you can have confidence the product has been tested in fire environments. Features Absorbent Glass Mat (AGM) technology for superior performance  Valve regulated (VRLA), maintenance free spill proof construction  Rugged vibration and impact resistant ABS case and cover  Gas recombination technology  5-year standby design life Specifications Nominal Voltage: 12VDC Capacity @ 20HR7Ah Length: 151mm Width: 65mm Height: 96mm Total Height: 101mm Weight: 2.1Kg Terminal: F1 Downloads Datasheet

Read more less

DC12V5A DVR POWER SUPPLY FOR TVI0808H & TVI 1616H DVR

Read more less

1M HDMI 4Kx2K 30Hz Cable Supports 3D and Ethernet Specifications CABLES COLOUR Black LENGTH 1M TYPE HDMI BRAND CABLE

Read more less

This Outdoor Security Cabinet, PA-WMCAB-W - DVR/NVR shelf has a capacity of up to 2U height, up to 490mm width & 400mm depth, with space to mount up to a 24'' LCD monitor*. It can accommodate most DVR/NVR’s and other access control and alarm system, making it a versatile Controller Cabinet Features Compact: size 585(W) x 650(H) x 180(D)mm (closed) Capacity: 2RU, 200~490mm width, 400mm depth Cable management knock-outs are in the wet and dry compartment Ventilation: Temperature controlled 12VDC Low Noise Fan and air intake filter Fits up to 24” monitor, with 75/100 VESA mounts 2 x cabinet locks use padlocks for additional security 30kg cabinet load bearing capacity (10kg vertical shelf) 440mm width between mounting points to fit wall studs Mild steel construction and white powder coating 4 x outlet power distribution unit(included) Temperature controlled Cooling Fan (included) Cooling Fan Power Supply (12VDC 1A included) 1.5m Power Cord included. * Ensure that the monitor has horizontal / downwards-facing input ports & power connectors Notes:  We recommend only using slimline thin bezel monitors (max Size 540x340x45 WxHxD); other monitors may not fit. 4 x M4 x 10mm screws included for monitor mounting  4 x washers included - to be ONLY used as a spacer if the monitor bracket fits into a recess at the back of the monitor. Shipping Weight and Dimensions Cabinet Dimensions Width-585mm ~ Height – 650mm ~ Depth – 180mm ~ Weight 16.5Kg Packing Dimensions Width-630mm ~ Height – 690mm ~ Depth – 230mm ~ Weight 18Kg Unboxing and Pre-installation Check The cabinet is approximately 18Kgs and care should be taken when unboxing.Suggested: open the end opposite to the product label and place open end on the floor or table. Slide the box up and remove. 2 cabinet lock keys will be fixed to the side packing foam. Technical and Installation Guide for DVR / NVR Secure Wall Mount Cabinet It is recommended that the cabinet be mounted in a well ventilated area. The Right side of the cabinet must have a minimum of 200mm clear space The bottom of the cabinet must have no less than 300mm clear space Once a suitable location is found, mount the box with the center of the monitor bracket at eye level. It is recommended that the top mounting holes be at least 1600-1700mm from the floor. Use M6x50mm wood, metal or masonry screws secure the box to the wall. Use the 2 top mounting KEYHOLE type anchor points first 440mm apart. Use the 2 bottom mounting slot holes to level and secure the cabinet to the wall Ensure all 4 mounting screws are secure. Downloads PA-WMCAB-W_datasheet PA-WMCAB-W_Installation Guide

Read more less

Standalone Access Control | HID Prox + EM | Multi-Mode WKP20 Standalone Door Controller with HID Prox and EM Card Reader Keypad The WKP20 is a metal-housed standalone access controller built on a 32-bit ARM processor, combining a backlit keypad with an integrated 125 kHz HID Prox and EM proximity card reader in a single weather-resistant housing. Designed for Australian commercial, industrial and residential entry doors, it supports up to 20,000 user credentials, multi-mode operation (Single-door, Double-door, Interlock, Reader / Wiegand pass-through and Demo), and full Wiegand 26–66 bit output for integration with Tecom Challenger, Inner Range, Gallagher, Paxton, ICT Protege and other Australian access control platforms. Deploy the WKP20 as a complete standalone door controller with onboard 1A relay, or convert it instantly to a Wiegand keypad/reader for third-party head-end systems via the TS1061-Dual Wiegand Interface. Self-adaption infrared anti-tamper, anti-duress credential support, multi-card unlock, super-open password, anti-crack lockout and configurable facility/site code make it suitable for everything from a back-of-house storeroom to a high-security access point. User Capacity 20,000 Users Credential Support HID Prox + EM 125kHz Operating Modes 5 Modes Built-in Wiegand Output 26 – 66 Bit Configurable Why Australian Installers Choose the WKP20 The WKP20 solves a problem most low-cost keypads cannot: it is genuinely multi-mode. The same hardware can run a fully standalone single door this morning, become the second leaf of a Double-door deployment this afternoon, and be reconfigured as a pure Wiegand pass-through reader for a Tecom Challenger panel by the end of the day — without changing a single wire. For Australian integrators stocking access control gear, that means fewer SKUs, faster jobs and a serious safety net when site requirements shift mid-install. It is built around a 32-bit ARM microcontroller with self-adaption infrared anti-demolition detection, an alarm/doorbell MOS output, NO/NC/COM relay rated to 1 A, and an operating envelope of −40 °C to +60 °C — comfortable for outdoor entries through Australia’s harshest climates, from Darwin loading docks to Hobart rear gates. Five Built-in Operating Modes Switch between Single-door, Double-door, Interlock, Reader (Wiegand pass-through) and Demo mode from the keypad — no software, no programmer. HID + EM Dual Format Reads 125 kHz HID Prox and EM credentials simultaneously, or restrict to a single format. Reader range up to 5 cm. 20,000 Users & 21 Admin Cards Programme by card, PIN, Card + PIN, or Multi-card unlock (2–10 cards in sequence). Admin cards include Set, Add, Delete, Super-open, Anti-duress, Authorisation and Normal-open. Infrared Anti-Tamper 24/7 Self-adaption infrared sensing detects illegal dismantle attempts day or night and triggers the onboard MOS alarm output (up to 1 A) — immune to visible-light interference. Anti-Crack Lockout Configurable wrong-attempt threshold (1–10) with alarm-only or full keypad/reader lockout for 1–99 minutes. Stops brute-force PIN and card scanning attacks dead. Wiegand 26 – 66 Bit Output Configurable site/facility code (0–255), parity (EO or none), plus RS232-TTL HEX / ASCII-8 / ASCII-10 output for integration with virtually any Australian access head-end. Integration with Tecom Challenger & Third-Party Panels Set the WKP20 to Reader mode and it becomes a pure Wiegand 26-bit pass-through reader for Tecom Challenger via the TS1061-Dual Wiegand Interface, Inner Range Integriti / Inception, Gallagher Command Centre, Paxton Net2, ICT Protege GX/WX and any other Wiegand-input controller. PIN entries are converted to Wiegand card data using the configurable facility/site code (1–255), so users can be enrolled as card holders even when no physical card is presented. Three external control wires (LED_R, LED_G, BEEP) accept low-level inputs from the host controller, so the WKP20’s red/green LED status and buzzer can be driven directly by the Tecom or Inner Range panel for full event feedback at the door. Australian Integrator Note When connecting the WKP20 to a TS1061-Dual Wiegand Interface on the main Challenger LAN as a “Standard Door”, PIN data is converted to Card Data using the programmed facility code. Factory-default the unit, set machine mode 03→0 (Reader), Wiegand output 64→4, and program facility code 60→(1–255) before connecting to the head-end. Full programming flow is in the Quick Setup Cheatsheet (download below). Security Features Built for Australian Compliance Anti-Duress Card A designated duress credential opens the door while silently activating the MOS alarm output — for retail, banking and aged-care applications where forced entry is a real threat. Super-Open Password 8-digit highest-priority unlock that overrides any user restriction, multi-card requirement or disabled-user state. Critical for emergency services and after-hours response. Normal-Open Card Toggle the door into Normal-Open mode with a tap — ideal for store opening hours, delivery windows or fire-drill events. Authorisation (Header) Card Globally enable or disable all users at the tap of one card. Lock the door down for cleaning, public-holiday closures or security incidents in seconds. Installation, Wiring & Power The WKP20 ships with a 12-core flying lead and accepts either 10–28 V DC (Red/Black) or 10–28 V AC (Red/Light-green, non-polarised). Standby current is ≤35 mA at 12 V DC and operating current is ≤100 mA, which means a single 2 A access-control PSU can power the controller, an electric strike or maglock, plus an exit button and door contact without breaking a sweat. NO/NC/COM dry-contact relay output (1 A) drives the lock directly for low-current strikes, or a dedicated lock power supply for fail-safe maglocks. The grey ALARM(BELL) lead is a MOS drain output sinking up to 1 A — wire it straight to an external siren, a strobe, or a doorbell decoder for two-in-one keypad & doorbell duty. Technical Specifications Model WKP20 Device Type Standalone Access Controller with integrated keypad & proximity reader Credential Formats HID Prox 125 kHz, EM 125 kHz, PIN (4–6 digit zone 1 / 7 digit zone 2) User Capacity 20,000 user credentials + 21 admin cards Operating Modes Single-door, Double-door, Interlock, Reader (Wiegand pass-through), Demo Processor 32-bit ARM core Working Voltage 10–28 V AC (non-polarised) or 10–28 V DC Standby Current ≤35 mA @ 12 V DC Operating Current ≤100 mA @ 12 V DC Onboard Relay NO / NC / COM dry contact, rated 1 A Alarm / Doorbell Output MOS drain, active low, drives up to 1 A Wiegand Output Configurable 26–66 bit, with or without parity (EO format) RS232-TTL Output HEX, ASCII-8 or ASCII-10 formats selectable Facility / Site Code Programmable 0–255 Reader Range Up to 5 cm (HID Prox & EM) Open Time 50 ms instantaneous, or 1–999 seconds programmable (default 2 s) Anti-Crack 1–10 wrong attempts → alarm or lockout 1–99 minutes Anti-Tamper Self-adaption infrared, 24/7 detection, immune to visible light Operating Temperature −40 °C to +60 °C Operating Humidity 0–95% (non-condensing) Housing Zinc-alloy metal, anti-vandal, with anti-demolition screw Keypad 12-key metal backlit, brightness & volume adjustable Doorbell Function “#” key configurable as doorbell with internal “ding-dong” tone Default Admin PIN 888888 (must be changed before programming) Compliance RoHS, CE Country of Sale Australia only — supported by CCTV Guru What’s in the Box 1 × WKP20 Standalone Door Controller (HID Prox + EM) 1 × Mounting plate with four self-tapping screws and plastic wall plugs 1 × Anti-demolition Torx screw & matching security screwdriver bit 1 × Pre-terminated 12-core flying lead loom 1 × Quick Setup Cheatsheet 1 × Full WKP20 User Manual (download) Recommended Use Cases Office & Warehouse Entry Standalone Single-door mode with HID Prox cards, exit button and electric strike. Up to 20,000 staff supported — no PC, no software, no licence fees. Tecom Challenger Door Reader mode + TS1061-Dual Wiegand Interface on Challenger LAN. WKP20 acts as Wiegand 26-bit reader with PIN-to-card conversion. High-Security Interlock Two WKP20 units in Interlock mode for clean rooms, cash rooms, secure pharmacy storage or mantrap-style entries. Retrofit Upgrade Drop-in replacement for legacy single-format keypads — keep your existing HID Prox or EM credentials with zero re-enrolment. Frequently Asked Questions Does the WKP20 work with Tecom Challenger? Yes. Set the WKP20 to Reader mode (03→0), Wiegand output 64→4 (1–5 digit key + # buffered, 26-bit) and configure a facility code (60→1–255). Connect to a TS1061-Dual Wiegand Interface on the Challenger LAN. What credential formats are supported? 125 kHz HID Prox and 125 kHz EM cards/fobs. You can also restrict the reader to read only HID, only EM, or both via menu 04. PIN-only operation is also supported. Can it run two doors from one unit? Yes. Set Double-door mode (03→2) and the WKP20 manages two independent zones with separate user lists, super-open passwords and admin cards using a single physical keypad. What happens if I forget the admin password? Two recovery methods: (1) Power-cycle while holding the # key to reset Admin PIN to 888888 without wiping users; or (2) hold the * key while powering on to perform a full factory reset (admin cards and user data are retained). Is it weatherproof for outdoor Australian conditions? The metal-housed WKP20 is rated for −40 °C to +60 °C operation. For full outdoor exposure in heavy rain or coastal salt-spray locations, install under a small eave or use a rain hood for maximum service life. Does the keypad have anti-tamper protection? Yes — self-adaption infrared anti-demolition detection runs 24/7. When the unit is removed from the wall plate it triggers an audible alarm and the MOS alarm output, regardless of ambient light conditions. Is there an anti-passback or brute-force protection? Anti-crack lockout is built in. Configure 1–10 wrong attempts and the keypad either alarms (43→1) or locks completely (43→2) for 1–99 minutes — stopping random PIN guessing and card scanning attacks. Do you offer warranty and support in Australia? Yes. CCTV Guru supplies the WKP20 with full local warranty, Australian-based technical support and access control commissioning advice for installers and end users across all states and territories. Downloads & Documentation WKP20 Datasheet (PDF) WKP20 User Manual Australian Stock 12-Month Warranty Free Tech Support

Read more less

Sentrol Hardwired Reed Switch White Detection Gap 9.52mm 1x N/C Output (Dry) Plastic Recessed Mount 18.8mm Hole Cutout The Sentrol Hardwired Reed Switch is engineered for reliable security in steel door applications. Featuring a 9.52mm detection gap and a single normally closed (N/C) dry contact output, it ensures precise monitoring. Its rugged plastic recessed mount with an 18.8mm hole cutout offers secure, tamper-resistant installation. Designed specifically for steel doors, the self-locking housing and recessed magnetic contact provide enhanced durability and discreet integration. This switch is ideal for commercial settings requiring dependable, high-security door monitoring with straightforward installation. Features Special design for steel mounting Self-lock mounting Rugged construction Attactive, added security of recessed installation Recessed magnetic contact for steel doors Steel door applications The Sentrol 1078(C/T) series steel door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. Many models including, wide gap, SPDT and biased for high security applications make the 1078 series the most widely used and comprehensive line available. Easy Installation The unique housing design features a rugged body construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Durability and dependability The Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10,000,000 cycles, guaranteeing a long life. Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory, 100% of the time. High quality components and materials Reed legs are plated with rhodium or ruthenium, and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion. More Information Sentrol 1078C-N Datasheet

Read more less

FSH Electric Strikes for Light Commercial and Residential Applications, IP56 Features Stainless steel faceplate and keeper Barbell mechanism for simple change of locking function Low power consumption Compatible with door latch depth of up to 15mm Superior holding strength of up to 1000kg 5 year warranty 12 or 24VDC operation Pre-drilled for extension lips CE/C-Tick Downloads FSH FES10 Brochure FSH FES10 Installation

Read more less

Indoor Security Cabinet, PA-WMCAB  Enhance your security surveillance with the Indoor Security Cabinet, PA-WMCAB. This vertically mounted cabinet is perfect for CCTV, alarms, and access control systems. Its dual lockable design, quick clip monitor bracket, and adjustable NVR base ensures secure and customizable installation. Designed for multi-use, this cabinet also comes equipped with a cooling fan and 12 cable entry punch outs for easy organization. Upgrade now and protect your valuable systems. Features Vertically mounted secure cabinet for CCTV, Alarms, Access control systems, etc. Dual Lockable Cabinet with Quick clip Monitor bracket and adjustable NVR base Multipurpose Secure Cabinet - Capable of housing Multiple Systems Cooling Fan kit with Temp. sensor and power adapter is included Fits up to a 24'' monitor, with 75/100 VESA mounts, (monitor must have downward facing input ports & power connectors) 4'' x 2'' Cut-outs on the rear panel (Power Socket not included) 12 cable entry punch outs on 4 sides with Rear Panel cable entry slot 4 outlet SAA PDU with IEC C14 connector and Power Cable is included. Downloads PA-WMCAB_datasheet PA-WMCAB_Installation Guide  

Read more less

Brush Wall Plate/bull Nose Brush Wall 2-in-1 Plate AC-BWP/BNP-01W-01EACH

Read more less

Power Backup Solution CJ12-7 12V 7Ah Sealed Lead Acid Battery Reliable VRLA backup battery designed for alarm systems, CCTV, UPS and emergency power applications across residential and commercial installations. Built with AGM technology for stable performance, low maintenance and long standby life. Key Features 12V 7Ah sealed lead acid (VRLA) battery 5-year design life in float service AGM technology for reliable standby performance 70A high discharge capability (5 seconds) Wide operating temperature range (-20°C to +60°C) Low self-discharge (<3% per month) Maintenance-free sealed design F1 (4.75mm) & F2 (6.35mm) Faston terminals Perfect For Alarm systems (Bosch, Hikvision, Dahua, Paradox) CCTV systems & NVR backup power UPS (Uninterruptible Power Supply) Emergency lighting systems Access control systems Medical and standby equipment Specifications Specification Details Voltage 12V Capacity 7Ah (20hr rate) Max Discharge 70A (5 seconds) Weight Approx. 2.0kg Operating Temp -20°C to +60°C Charge Current Max 2.1A Terminals F1 (187) & F2 (250) Faston Tabs Why Choose This Battery? Trusted replacement for most alarm system batteries Works across multiple brands and systems Long standby reliability for critical security systems Safe sealed design – no leaks or maintenance Ideal balance between price and performance Upgrade Your System Shop Alarm Systems Shop CCTV Kits Power Supplies & UPS More Information Download CJ12-7 Datasheet (PDF) Why Buy from CCTV Guru? Fast Australia-wide shipping Trusted security & power supplier Expert support for installers and DIY

Read more less

3M HDMI Cable Specifications CABLES COLOUR Black LENGTH 3M TYPE HDMI BRAND CABLE

Read more less

3 in 1 Out HDMI Switcher

Read more less

Power Supply AC24V 1A

Read more less

25m Cat5 Ethernet Network Cable: Blue Specificatiions CABLES COLOUR Blue LENGTH 25M TYPE CAT5 BRAND CABLE

Read more less

4K/2K V2.0 Active Booster (30MHz) - 10M Specifications CABLES COLOUR Black LENGTH 10M TYPE HDMI BRAND CABLE

Read more less

DC12V1.5A DVR POWER SUPPLY for TVI 0404H

Read more less

4K/2K V2.0 Active Booster (30MHz) - 5M Specifications CABLES COLOUR Black LENGTH 5M TYPE HDMI BRAND CABLE

Read more less

20M HDMI Cable Specifications CABLES COLOUR Black LENGTH 20M TYPE HDMI BRAND CABLE

Read more less

The 19-Inch Wall Mounted Cabinet is a professional, space-saving solution designed to securely house networking, CCTV, and server equipment in homes, offices, retail stores, and commercial environments. Built to industry-standard 19-inch rack specifications, these wall cabinets are ideal for switches, patch panels, NVRs, UPS units, and other rack-mount devices. With multiple height (U) and depth options available, you can select the exact cabinet size you need using the variant selector. Featuring a lockable front door, removable side panels, cable entry points, and ventilation support, these cabinets offer both security and airflow, making them suitable for professional IT and security installations. Key Features & Benefits Standard 19-inch rack compatibility Wall-mounted design – saves valuable floor space Multiple sizes available (select height & depth as variants) Lockable front door for equipment security Removable side panels for easy access Top & bottom cable entry points Ventilation slots / fan-ready design Strong steel construction with powder-coated finish Ideal for network, CCTV, server & AV equipment Technical Specifications Specification Details Rack Standard 19-inch EIA Standard Mount Type Wall Mounted Available Heights 4U/6U / 9U  (Variant-Based) Available Depths 450 mm / 600 mm (Variant-Based) Material Powder-Coated Steel Front Door Lockable Glass or Steel Door Side Panels Removable (Lockable on Some Models) Ventilation Vent Slots / Fan-Ready Cable Entry Top & Bottom Cable Access Applications Network Switches, Patch Panels, CCTV NVRs, UPS More Information Server & Network Cabinets Datasheet

Read more less

Smart Hardwired Reed Switch White Detection Gap 50mm 1 X N/C Output (Dry) Plastic Surface Mount With Soldering Terminal Rola Style, WSS60WH

Read more less

Global 19-inch Wall Mounted Rack With Swing Door 9RU With Tempered Glass Door Metal Powder Coated Black Up To 45KG 600W x 501H x 600D (MM) The Global WMR-66xxBK Wall mountable rack come fully assembled and ready for immediate use. Perfectly suited for the Audio, Communication, IT and Security markets or any 19" rack mountable equipment. The clean unbranded look is ideal for integrator branding of their choice and a rotating tempered glass door allows it to mounted in any location. Specifications Colour: BlackRU Measurement: 1 - 9Open/ Closed: Enclosed RackMounting Options: HorizontalLoad Capacity: 60 KGWidth: 600 mmDepth: 600 mmHeight: 501 mmRack Type: WallMaterial: Powder Coated Steel

Read more less

Aritech S2523 Reed Switch Overhead Door Magnetic Contact, 76mm, 1.5ft Arm The Aritech S2523 is a heavy-duty reed switch magnetic contact designed for securing overhead, roller, and industrial doors. Featuring a 76mm armature and 1.5ft (450mm) armored cable, this contact is ideal for use in demanding commercial and industrial environments where durability and reliability are critical. With its robust aluminum housing and wide operating gap, the S2523 provides dependable magnetic alignment and tamper-resistant protection for large entryways. This switch is commonly used in warehouse shutters, factory doors, and industrial roller doors, and integrates easily with alarm systems or security automation setups. Key Features Surface mount magnetic contact Designed for overhead/roller doors 76mm wide aluminum armature 1.5ft (450mm) stainless steel armored cable Wide operating gap: approx. 75mm Rugged design for industrial applications Compatible with most wired alarm systems Screw mount installation

Read more less

AC24V6.25A POWER SUPPLY

Read more less

5 in 1 Out HDMI Switcher Experience multi-device viewing with ease using the AB-SW501E 5-in-1 HDMI Switcher.

Read more less

DC12V5A POWER SUPPLY

Read more less

15M HDMI Computer Network Cable Specifications CABLES COLOUR Black LENGTH 15M TYPE HDMI BRAND CABLE

Read more less

Power Supply for Intercom Monitor

Read more less

2M HDMI Cable Specifications CABLES COLOUR Black LENGTH 2M TYPE HDMI BRAND CABLE

Read more less