Hikvision Pro Series · Face · Card · QR · PIN · Intercom
Hikvision DS-K1T502DBWX Pro Face & Card Access Terminal — Card, PIN, QR, Bluetooth, SIP Intercom & Hik-Connect
The Hikvision DS-K1T502DBWX is a professional access control and video intercom terminal for Australian offices, apartments, warehouses, schools, clinics, retail stores and secure commercial entry points. It combines card access, PIN entry, Bluetooth unlocking, Hik-Connect remote control and SIP intercom into one clean, vandal-resistant unit with a built-in 2MP camera.
This listing covers the full DS-K1T502DBWX range in one place. Choose your reader (card-only, or card plus QR code authentication) and your power method (local 12–24 VDC or PoE) using the options above — each combination ships as its own genuine Hikvision SKU.
Choose Your Model
DS-K1T502DBWX Range — 4 Configurations
| Model (SKU) |
QR Code |
Power |
Best For |
| DS-K1T502DBWX-C |
No |
12–24 VDC |
Card & PIN entry with local power |
| DS-K1T502DBWX-E1 |
No |
PoE |
Card & PIN entry with single-cable PoE |
| DS-K1T502DBWX-CQR |
Yes |
12–24 VDC |
QR/visitor access with local power |
| DS-K1T502DBWX-CQRE1 |
Yes |
PoE |
QR/visitor access with single-cable PoE |
Authentication
QR · Card · PIN
Door Control
Dual Relay Support
Connectivity
Wi-Fi · Bluetooth · LAN
Why Choose the DS-K1T502DBWX?
One Device for Access Control & Intercom
Manage door access and visitor calling from a single professional terminal — ideal for offices, apartment entries, strata gates, staff doors and commercial sites that need more than a basic card reader.
Flexible Authentication
All models support card, PIN and Bluetooth access. The CQR and CQRE1 models add QR code entry for visitor and temporary access workflows.
12V DC or PoE — Your Choice
Pick local 12–24 VDC power (C / CQR) or single-cable PoE 802.3at (E1 / CQRE1) to suit your cabling, lock design and site layout.
Hik-Connect Remote Control
Use Hik-Connect for mobile app integration, remote unlock and visitor handling where supported by the system design and configuration.
Built for Australian Conditions
IP65 weather protection and IK09 impact resistance make every model suitable for exposed entrances, outdoor gates, warehouses and high-traffic commercial environments.
Installer-Friendly Integration
Includes Wiegand, RS-485, door contact input, exit button input, alarm input/output and dual lock control for professional access control installations.
Recommended For
Office & Staff Entry Doors
Give employees card, PIN or QR access while keeping visitor entry controlled and logged.
Apartment & Strata Entrances
Use intercom calling, QR access and remote management for shared building entrances and controlled lobby access.
Warehouses & Industrial Sites
Strong housing, wide operating temperature and vandal resistance make it practical for loading docks, staff doors and secure storage zones.
Retail & Back-of-House Access
Secure staff-only areas, stockrooms, office doors and rear entries with professional event logging.
Schools, Clinics & Community Sites
Manage controlled entry points with flexible authentication and remote unlock options.
Visitor & Contractor Access
QR code (CQR / CQRE1) and PIN options make it easier to manage temporary access without issuing permanent cards to every visitor.
Technical Specifications
Hikvision DS-K1T502DBWX · Pro Face & Card Terminal
| Product Type |
Pro access control terminal with video intercom |
| Models |
DS-K1T502DBWX-C / -E1 / -CQR / -CQRE1 |
| Video Resolution |
2 MP |
| Field of View |
HFOV 110° · VFOV 81° · DFOV 122° |
| Video Compression |
H.264 / H.265 |
| Authentication |
Card, PIN, Bluetooth (all models) · QR code (CQR & CQRE1) |
| Card Types |
M1 card, M1 card content, DESFire card |
| Wired Network |
1 × RJ-45 10/100 Mbps self-adaptive |
| Wi-Fi |
2.4 GHz, 802.11b/g/n |
| Bluetooth |
Supported |
| Lock Control |
2 lock controls / dual relay support |
| Exit Button Input |
1 |
| Door Contact Input |
1 |
| Alarm Input / Output |
2 in / 1 out |
| Tamper |
1 |
| RS-485 |
1 × RS-485, half duplex |
| Wiegand |
1 × Wiegand, Hik 26-bit / Hik 34-bit |
| SD Card Slot |
1 |
| Hik-Connect |
Supported |
| Video & SIP Intercom |
Supported (incl. 3CX, Asterisk, FreePBX & other compatible SIP platforms) |
| Power Supply |
12–24 VDC, 1 A (C / CQR) · PoE 802.3at (E1 / CQRE1) |
| Power Consumption |
≤ 24 W |
| Lock Output Power |
12 V, 1 A |
| Operating Temperature |
−40°C to +65°C |
| Protection Rating |
IP65 weather protection · IK09 impact resistance |
| Body Material |
Zinc alloy |
Installation Notes
Use Professional Access Control Wiring
For reliable operation, use suitable cable, correct power supply sizing, proper lock wiring and a qualified security/access control installer where required.
Plan the Door Hardware First
Confirm your electric strike, maglock, request-to-exit button, door contact and fail-safe/fail-secure requirements before installation.
12–24 VDC or PoE
Choose the C / CQR (local 12–24 VDC) or E1 / CQRE1 (PoE 802.3at) model based on your door lock, cable route and site design.
Hikvision Ecosystem Ready
Best suited for Hikvision access control, Hik-Connect, HikCentral and compatible intercom environments where correct configuration is performed.
Watch the DS-K1T502 Series in Action
How to configure QR code access, Hik-Partner Pro and Hik-Connect integration on the DS-K1T502DBWX series.
Product unboxing and demonstration of the Hikvision vandal-resistant DS-K1T502 Series access control terminal.
Downloads & Resources
Official Hikvision datasheets and documentation for the DS-K1T502DBWX range.
Frequently Asked Questions
What's the difference between the four models?
They share the same terminal and features. The difference is QR code support (the CQR and CQRE1 add QR entry) and power (the E1 and CQRE1 are PoE; the C and CQR use 12–24 VDC). Pick your combination using the Reader and Power options above.
Should I choose 12V DC or PoE?
Choose PoE (E1 / CQRE1) for a single-cable install where you have a PoE switch or injector. Choose 12–24 VDC (C / CQR) when you're powering the door locally or already have a DC supply at the door.
Do I need the QR model?
Choose a QR model (CQR / CQRE1) if you want to issue scannable QR passes for visitors, tenants or temporary access. If you only need card, PIN and Bluetooth, the C / E1 models are ideal.
Is it an access control reader or an intercom?
Both. Every model combines access control authentication with 2MP video intercom functionality in one device.
Can it be used outdoors?
Yes. All models are rated IP65 for weather protection and IK09 for impact resistance, suitable for many outdoor entry applications.
Does it support Hik-Connect and SIP?
Yes. Hik-Connect is supported for remote control, and SIP intercom integration works with compatible platforms including 3CX, Asterisk and FreePBX.
Does it include the door lock?
No. Door locks, exit buttons, door contacts, power supplies and cabling are normally selected separately based on the door type and installation design.
Do you ship Australia-wide?
Yes. CCTV Guru ships genuine Hikvision access control products Australia-wide with local support.
Order the Hikvision DS-K1T502DBWX from CCTV Guru
Order the Hikvision DS-K1T502DBWX Pro Face & Card Access Terminal from CCTV Guru — choose your reader and power configuration above for genuine Hikvision hardware, fast Australia-wide dispatch, local technical support and expert advice on compatible locks, exit buttons, door contacts and access control system design.
