Search results for "seagate skyhawk"

SURVEILLANCE-GRADE STORAGE · BUILT FOR CONTINUOUS RECORDING Professional HDD Storage for CCTV, DVR and NVR Systems Protect important video footage with a purpose-built 3.5-inch SATA surveillance hard drive designed for continuous, write-intensive security recording. Select the capacity that suits your camera count and retention target, from compact 2TB installations through to high-capacity 16TB systems. Capacity Range 2TB to 16TB Operating Profile 24/7 Surveillance Form Factor 3.5-inch SATA Recorder Support DVR · NVR · XVR Choose the Right Capacity 2TB–4TB · Compact SystemsA practical fit for smaller home systems, fewer cameras, motion recording and shorter retention periods. 6TB–8TB · Everyday Multi-CameraBalanced capacity for residential, retail and small-business systems that need a longer recording history. 10TB–12TB · Extended RetentionSuited to higher camera counts, higher resolutions and sites where recorded footage must remain available longer. 14TB–16TB · High-Capacity RecordingDesigned for demanding commercial recorders and storage-heavy installations, subject to the recorder's supported drive limit. Capacity Planning Guide System Size Approx. 14-Day Retention Approx. 30-Day Retention 2 cameras 2TB–4TB 4TB–6TB 4 cameras 4TB–6TB 8TB–10TB 6 cameras 6TB–8TB 12TB–16TB 8 cameras 8TB–10TB 16TB+ Planning estimates assume high-resolution H.265 recording at a moderate frame rate. Actual retention varies significantly with resolution, bitrate, frame rate, compression, motion activity and recording schedule. Why Choose a Surveillance HDD? Continuous Video WorkloadsSurveillance firmware is designed around sustained recording and playback rather than the intermittent workload of a desktop computer. Multi-Stream RecordingOptimised to manage simultaneous video streams from multiple security cameras while maintaining dependable footage capture. Recorder EnvironmentsPurpose-built for compatible DVR and NVR chassis where drives operate continuously for long periods. Evidence You Can Rely OnA surveillance-grade drive helps reduce the risk of dropped frames and incomplete recordings during demanding write activity. Product Specifications Capacity Options 2TB · 4TB · 6TB · 8TB · 10TB · 12TB · 14TB · 16TB Drive Type Internal surveillance hard disk drive Form Factor 3.5-inch Interface SATA Designed For Compatible CCTV DVR, NVR and XVR recorders Recording Profile Continuous 24/7 surveillance workloads Brand Supplied Seagate SkyHawk or WD Purple, according to available stock Compatibility Before Ordering This drive uses the standard 3.5-inch SATA format found in many Hikvision, Dahua, Uniview, HiLook, UniFi Protect, Vivotek and other CCTV recorders. Always confirm the recorder's maximum supported capacity per HDD bay before selecting a drive, especially for 12TB, 14TB and 16TB options. Surveillance-Grade HDD Australian Technical Support Australia-Wide Delivery

Read more less

Seagate SkyHawk & SkyHawk AI HDD — 2TB to 16TB Choose the exact Seagate surveillance hard drive by model and capacity for a compatible CCTV recorder. 3.5-inch SATA drives; verify recorder support for the chosen capacity. The 10TB ST10000VE001 option is SkyHawk AI, not the standard SkyHawk family. Warranty is model-specific: standard SkyHawk and SkyHawk AI are separate product families. Model Specification ST2000VX017 2TB ST4000VX016 4TB ST6000VX009 6TB ST8000VX010 8TB ST10000VE001 10TB ST16000VE004 16TB Frequently asked questions Will it work with my recorder? Check the recorder compatibility list, firmware and maximum supported capacity per bay against the exact selected drive. Is the drive installed for me? This is a drive-only listing. Installation is included only when expressly stated in a recorder or system package. How long will recordings be retained? Retention depends on camera count, bitrate, recording schedule and available formatted capacity. Are all variants the same family? No. The listed 10TB and 16TB options use SkyHawk AI order codes. Check the exact model rather than applying one family specification to every capacity. Official manufacturer specifications and documents

Read more less

UniFi Protect 4K CCTV Kit — NDAA Compliant UniFi Protect 4K CCTV Kit — 4 × G6 Turret AI Cameras + UNVR Instant PoE NVR Everything you need to deploy a professional 4K UniFi Protect CCTV system in one box. This kit pairs 4 × UniFi G6 Turret 4K AI cameras with the compact UNVR Instant PoE NVR, delivering enterprise-grade surveillance for homes, offices, retail stores, and small businesses across Australia. Power the cameras straight from the NVR's built-in PoE ports, record locally to a single 3.5″ drive, and manage everything through UniFi Protect with no cloud subscription and no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping (HDD sold separately). Resolution 4K / 8MP Night Vision IR 30 m PoE Ports 6 × Built-in Compliance NDAA What's Included in the Kit 1 × UniFi Protect UNVR Instant NVR Compact PoE NVR with 6 × Gigabit PoE downlink ports, a GbE uplink, HDMI ViewPort for live local display, and a single 3.5″ HDD bay. Records and manages up to 6 × 4K cameras — no separate PoE switch required. 4 × UniFi G6 Turret 4K AI Cameras 4K 8MP turret cameras with the Multi-TOPS AI Engine (people, vehicles, animals, face and licence-plate recognition), 30 m IR night vision, IP66 weatherproofing, and IK04 tamper resistance. Mounting Hardware Ceiling and wall mounting brackets, screws, and anchors included for all four cameras, plus the UNVR Instant wall / DIN-rail mount. HDD Not Included A surveillance-grade 3.5″ SATA HDD is required for local recording. We recommend WD Purple or Seagate SkyHawk. Why Choose This UniFi Protect Kit? True 4K 8MP Clarity on All 4 Cameras Every camera captures 3864 × 2160 footage at 30 FPS from a large 1/1.8″ 8MP sensor — enough detail to identify faces, read licence plates, and review incidents with confidence across all four channels. Multi-TOPS AI — Face & Licence-Plate Recognition On-camera AI detects people, vehicles, animals, faces, and licence plates in real time — all processed locally with no cloud dependency, no subscription, and no latency. All-in-One PoE NVR The UNVR Instant powers all four cameras from its built-in PoE ports (40 W total budget, up to 15.4 W per port) — no separate PoE switch or injector to buy or wire. Single-Cable PoE Installation One Ethernet cable per camera carries both power and data from the UNVR Instant's PoE ports — clean, simple runs with no electrician required. HDMI ViewPort — Live Local Display Connect any HDMI TV or monitor to the UNVR Instant to display camera feeds live — no PC, no app, and no internet required for on-site monitoring. IP66 Weatherproof & IK04 Tamper-Resistant All four G6 Turret cameras are sealed against rain and dust, IK04 impact-rated, and rated from −30°C to 50°C — suited to Australian outdoor environments including coastal and high-UV areas. No Subscription — Ever UniFi Protect runs fully locally on the UNVR Instant. No monthly fees, no cloud lock-in, no data leaving your premises — full functionality from day one. NDAA Compliant Both the cameras and the NVR are fully NDAA Section 889 compliant — suitable for government, defence, education, and security-sensitive installations. See It in Action Official Ubiquiti walkthrough — UniFi Protect G6 camera range Ideal Use Cases Home Security Cover driveways, front yards, side paths, and entry points with 4K AI cameras and local recording — no ongoing costs after setup. Retail & Shopfronts Monitor shopfronts, checkout areas, and car parks with 4K clarity, face recognition, and AI-powered alerts — all recorded locally. Small Offices & Strata Secure office entries, car parks, and common areas with a compact, self-contained system that fits in any comms cabinet. Schools & Childcare NDAA-compliant cameras and local-only recording make this kit ideal for schools, childcare centres, and education facilities. Technical Specifications NVR Model UniFi Protect UNVR Instant (UNVR-Instant) PoE Ports 6 × Gigabit PoE downlink + 1 × GbE uplink • 40 W PoE budget, up to 15.4 W per port Camera Capacity Up to 6 × 4K (or 8 × 2K / 15 × HD) HDMI ViewPort Yes — live camera display on any HDMI monitor / TV Storage 1 × 3.5″ SATA HDD bay (drive not included) NVR Processor / Memory Quad-core Arm® Cortex®-A55 @ 1.7 GHz • 4 GB Camera Model UniFi G6 Turret (UVC-G6-Turret) Camera Resolution 4K UHD — 8 MP, 3864 × 2160 (16:9) @ 30 FPS Image Sensor 1/1.8″ 8 MP CMOS, HDR Field of View H: 109.9° • V: 56.7° • D: 134.1° Night Vision Built-in IR LEDs + IR cut filter, up to 30 m AI Detection People, vehicles, animals, face recognition, licence-plate recognition (Multi-TOPS AI Engine) Audio Built-in microphone Weatherproof Rating IP66 Tamper Resistance IK04 Camera Power PoE (802.3af), 37–57 V DC • max 12.5 W per camera Camera Operating Temp −30°C to 50°C, 0–90% non-condensing Management UniFi Protect (app & web, no subscription) Compliance NDAA compliant • CE / FCC / IC Colours Available White (UVC-G6-Turret-W) / Black (UVC-G6-Turret-B) Recommended HDD Sizes CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & Resources G6 Turret Datasheet UNVR Instant Datasheet Frequently Asked Questions Does this kit require a subscription? No. UniFi Protect runs fully locally on the UNVR Instant. There are no monthly fees, no cloud subscription, and no data leaving your premises. Can the UNVR Instant power all 4 cameras? Yes. The UNVR Instant has 6 built-in PoE ports with a 40 W total budget (up to 15.4 W per port), which powers and records all four G6 Turret cameras from a single appliance — no separate PoE switch needed. What HDD do I need? Any compatible 3.5″ SATA surveillance-grade HDD. We recommend WD Purple or Seagate SkyHawk for 24/7 recording reliability. The HDD is not included in this kit. Can I add more cameras later? Yes. The UNVR Instant has 6 PoE ports and supports up to 6 × 4K cameras, so you can add two more (within the 40 W PoE budget). For larger systems, connect additional cameras via the uplink port to a separate PoE switch. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Are the cameras suitable for outdoor use in Australia? Yes. IP66 weatherproofing, IK04 tamper resistance, and a −30°C to 50°C operating range make the G6 Turret fully suited to Australian outdoor environments including coastal and high-UV areas. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Hikvision M Series · 4K · 4 PoE Hikvision DS-7604NI-M1/4P 4 Channel 4 PoE 1U 4K NVR The Hikvision DS-7604NI-M1/4P is a compact 4-channel 4 PoE Network Video Recorder built around Hikvision's latest M Series platform. It records and manages up to 4 IP cameras at resolutions up to 32 MP per channel, decodes 4 × 8 MP streams simultaneously, and drives an external monitor at true 8K HDMI output — all from a small, silent 1U chassis that's perfect for Australian homes, retail counters, offices and small commercial sites. Four built-in PoE ports power and connect your cameras over a single Cat6 run, so installation is genuinely plug-and-play. A single SATA bay accepts a surveillance-grade HDD up to 16 TB — giving you weeks of high-resolution footage on a clean, energy-efficient recorder. Channels 4 CH · Up to 32 MP PoE Ports 4 × PoE (af/at) Display True 8K HDMI Output Storage 1 × SATA · Up to 16 TB Why this 4-channel NVR is the sweet spot for small sites Most Australian homes, shops and offices need 3–4 cameras — not 8 or 16. The DS-7604NI-M1/4P is sized precisely for that real-world scenario, but unlike entry-level recorders it gives you the same 8K HDMI output, 32 MP camera support and H.265+ smart compression as Hikvision's higher channel-count NVRs. Buy once, future-proofed for the next generation of 4K and 4K+ AcuSense cameras. True 32 MP Input Support Each of the four channels accepts cameras up to 32 MP — so you can deploy Hikvision PanoVu, fisheye, ColorVu and 4K+ AcuSense models without throttling resolution. AcuSense Smart Detection When paired with AcuSense cameras, the NVR runs deep-learning human and vehicle classification to filter out leaves, animals and shadows — drastically reducing false alarms. 4 PoE Ports Built-In Power and data over a single Cat6 run to each camera, up to 100 m. IEEE 802.3 af/at compliant with auto-detection — plug your cameras in and they appear automatically. Single-SATA, 16 TB Capacity Drop in a Seagate SkyHawk or WD Purple drive up to 16 TB for weeks of continuous 4K H.265+ recording — silent, low-power, and rated for 24/7 surveillance duty. 8K HDMI & VGA Outputs Drive an 8K (7680 × 4320) monitor for ultra-sharp playback, or use the independent VGA output to run a second viewing screen at the same time. H.265+ Smart Compression Hikvision's H.265+ codec reduces bitrate by up to 75% versus H.264 — meaning more days of footage on the same drive, or the same retention on a smaller drive. Watch the M Series NVR in action AcuSense NVR + Standard Camera — Smart False-Alarm Filtering Hikvision AcuSense — Official Overview Engineered for Australian conditions Every M Series NVR sold by CCTV Guru ships from our Australian warehouse with local stock, local firmware, and full Australian Hikvision warranty. The DS-7604NI-M1/4P operates reliably from −10 °C to 55 °C, accepts standard 100–240 V AC mains, and is built to handle the heat, humidity and dust typical of Australian commercial, residential and industrial sites. Hik-Connect P2P Free remote viewing on iOS and Android via the Hik-Connect app — no static IP or port forwarding required. ONVIF Compatible Pairs with third-party ONVIF cameras as well as the full Hikvision IP range, giving you flexibility for hybrid sites. Two-Way Audio Built-in 1-channel audio input/output via RCA — pair with a compatible camera for two-way talk through Hik-Connect. Smart Playback Search recordings by face, human, vehicle, line-crossing or intrusion event — hours of footage reviewed in seconds. Full technical specifications Hikvision M Series NVR — DS-7604NI-M1/4P Model DS-7604NI-M1/4P Series Hikvision M Series 4K NVR Video Inputs 4-channel IP, up to 32 MP per channel Incoming Bandwidth 40 Mbps Outgoing Bandwidth 80 Mbps Video Compression H.265+ / H.265 / H.264+ / H.264 Decoding Capability 4-ch @ 8 MP (30 fps) · 8-ch @ 4 MP (30 fps) · 16-ch @ 1080p (30 fps) Recording Resolution 32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA Synchronous Playback Up to 4-channel HDMI Output 8K (7680 × 4320) @ 30 Hz · 4K (3840 × 2160) @ 30 Hz · 2K · 1080p VGA Output 1920 × 1080 @ 60 Hz (independent output) Audio In / Out 1-ch RCA in · 1-ch RCA out (two-way audio) Smart Function AcuSense — Human/Vehicle classification, perimeter protection, false alarm filtering (with compatible cameras) Network Interface 1 × RJ45 10/100/1000 Mbps Self-Adaptive Ethernet PoE Interfaces 4 × Independent 10/100 Mbps PoE (IEEE 802.3 af/at) PoE Budget 60 W total, max 30 W per port (Hi-PoE) Network Protocols TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS, ONVIF, OTAP HDD 1 × SATA, up to 16 TB (sold separately) USB Interfaces 1 × USB 3.0 (front) · 1 × USB 2.0 (rear) Power Supply 52 V DC adapter (supplied) Power Consumption ≤ 10 W (without HDD and PoE off) Working Temperature −10 °C to 55 °C Working Humidity 10% – 90% Dimensions (W × D × H) 315 × 240 × 48 mm Weight (without HDD) ≤ 1.16 kg Mobile Apps Hik-Connect, Hik-Central, iVMS-4200 Australian Warranty 3 Years — CCTV Guru / Hikvision Australia CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & resources DS-7604NI-M1/4P Datasheet View Hikvision Australia Page Frequently asked questions Does the DS-7604NI-M1/4P come with a hard drive? The recorder ships as a chassis only. CCTV Guru can pre-fit a Seagate SkyHawk or WD Purple surveillance drive from 2 TB to 16 TB — choose your preferred capacity at checkout. Will it work with non-Hikvision cameras? Yes — the NVR is ONVIF compatible and works with most third-party ONVIF IP cameras. For full AcuSense smart features you'll need genuine Hikvision AcuSense-compatible cameras. Can I view recordings on my phone? Yes — set up Hik-Connect on iOS or Android for free remote live view, playback and motion alerts. No port forwarding required. What cameras does it pair best with? Any Hikvision IP camera — but to unlock AcuSense smart features pair it with Hikvision AcuSense cameras such as the ColorVu, AcuSense Pro and DarkFighter ranges. How many days of recording will I get?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Do you ship to my city? We ship Australia-wide from our local warehouse — Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin — with most metro orders arriving in 1–3 business days. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link VIGI NVR1008H-8MP 8-Channel PoE+ Network Video Recorder 8-Channel PoE+ NVR for Small to Medium Business Surveillance The TP-Link VIGI NVR1008H-8MP is an 8-channel PoE+ network video recorder with 8 built-in PoE+ ports and a 113 W total power budget. It powers and connects up to 8 IP cameras over a single Ethernet cable per camera — no separate power adapters or PoE switch required. With 4K HDMI output, up to 8MP recording resolution, H.265+ compression, and plug-and-play VIGI camera support, it’s a complete, scalable CCTV solution for Australian businesses and commercial installations. Key Features 8 × built-in PoE+ ports (113 W total budget, up to 30 W per port) — power and connect cameras with a single RJ45 cable 4K HDMI video output with up to 16MP decoding capacity Records up to 8MP resolution across all 8 channels simultaneously H.265+ compression — reduces storage and bandwidth without sacrificing image quality Plug & Play — VIGI IP cameras are automatically detected and activated on connection ONVIF compatible — works with VIGI and third-party IP cameras 8-channel simultaneous playback with variable speed and event-based search 24/7 continuous recording with support for up to 10 TB HDD (SATA, sold separately) Remote monitoring via VIGI app, web UI, and VIGI Security Manager Two-way audio via voice intercom support Flexible installation — rack-mount, desktop, or under-desk deployment Use Cases Small to Medium Business: Groceries, warehouses, restaurants, and financial institutions needing 8-camera coverage with 24/7 recording and remote access. Commercial Premises: Monitor entrances, car parks, loading docks, and internal areas from a single recorder with 4K display output. Retail & Hospitality: Fast incident review with 8-channel simultaneous playback and event-based search — no scrubbing through hours of footage. Remote Site Monitoring: VIGI app and web UI allow real-time viewing and playback from any location with an internet connection. Scalable Installations: ONVIF compatibility allows integration of cameras from multiple brands as your system grows. Specifications Specification Detail Model VIGI NVR1008H-8MP Video Channels 8-channel IP video input Max Recording Resolution Up to 8MP Decoding Capacity Up to 16MP Video Output 1 × HDMI (4K) + 1 × VGA Video Compression H.265+ / H.265 / H.264+ / H.264 PoE Ports 8 × 10/100 Mbps PoE+ (802.3at/af) PoE Budget 113 W total (up to 30 W per port) HDD Interface 2 × SATA (up to 10 TB each) ONVIF Supported Remote Access VIGI App, Web UI, VIGI Security Manager Two-Way Audio Supported Mounting Rack-mount, desktop, or under-desk Weight 2.34 kg Frequently Asked Questions Does the NVR1008H-8MP include a hard drive? No. The NVR is sold without a HDD. You will need to install a surveillance-grade SATA HDD (e.g., Western Digital Purple or Seagate SkyHawk). The unit supports up to 2 SATA drives for expanded storage capacity. Do I need a separate PoE switch to connect cameras? No. The NVR1008H-8MP has 8 built-in PoE+ ports that power and connect your cameras directly — no separate PoE switch or power adapters required for the cameras. Can I use non-VIGI cameras with this NVR? Yes. The NVR1008H-8MP is ONVIF-compliant, allowing you to add IP cameras from other brands. Plug-and-play auto-detection and instant activation applies only to VIGI cameras. How do I access footage remotely? Download the free VIGI app on iOS or Android, or log in via the web UI using your TP-Link ID. The VIGI Security Manager desktop application is also available for PC-based monitoring and management. How many cameras can I connect at full resolution? The NVR supports 8 channels at up to 8MP resolution simultaneously. Actual performance depends on camera resolution and bitrate settings. H.265+ compression is recommended to maximise storage efficiency and maintain smooth playback. What mounting options are available? The NVR1008H-8MP supports rack-mount installation (rack ears included), desktop placement, or under-desk mounting — giving installers flexibility to suit the installation environment.

Read more less

WizSense AI · 8-Channel · 8-PoE · 4K 8-Channel WizSense NVR The Dahua DHI-NVR4108HS-8P-AI/ANZ is a compact 8-channel WizSense AI NVR with 8 built-in PoE+ ports, 4K HDMI output, and a dedicated deep-learning chip for face recognition, perimeter protection and SMD Plus motion analytics. Record up to 16 MP per channel, plug all eight cameras directly into the back of the recorder, and view live or playback from your phone via DMSS — all from a chassis small enough to slip into a media cabinet. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipping with regional firmware, an AS/NZS-compliant 53 VDC adaptor, and a local 3-year warranty backed by CCTV Guru in Sydney. One SATA bay accepts a surveillance-grade HDD up to 16 TB — ideal for homes, small offices, retail shops and workshops running up to eight cameras. 8 PoE+ ports — one cable per camera PoE Ports 8 × 10/100 · IEEE 802.3af/at PoE Budget 72 W total · up to 25.5 W per port Power + video on one cable Each Cat6 run carries power and video back to the NVR — no power adaptors at every camera, no PoE switch in the rack. Eight ports cover most homes, small offices and retail shops in one box. Powers high-draw cameras 25.5 W per port (PoE+ / 802.3at) handles IR-heavy bullets, mini PTZs, multi-sensor cameras and Dahua's active-deterrence units that exceed the basic PoE 15 W ceiling. Gigabit uplink to your network 10/100/1000 Mbps RJ-45 to your switch or router — remote viewing, NAS backup and multi-site VMS pulls don't bottleneck on a slow link. Australia / NZ-tuned firmware The AI/ANZ suffix means region-correct firmware, AS/NZS-compliant 53 VDC adaptor, and a 3-year warranty backed by CCTV Guru in Sydney. WizSense AI — deep-learning that knows people from leaves Dedicated AI Chip Independent deep-learning processor Targeted Alerts Human + vehicle classification only Face Recognition 1 channel of face detection + recognition by the NVR (12 face snapshots/sec), or extend to 8 channels using camera-side detection feeding NVR-side recognition. Up to 10 face databases and 20,000 face images. Perimeter Protection 2 channels of tripwire and intrusion analytics, 10 IVS rules per channel, with human/vehicle secondary recognition that filters out animals, leaves and lighting changes — no more 3 am alerts from a moth on the lens. SMD Plus on 4 channels Smart Motion Detection Plus runs a deep-learning second pass on motion events, classifying targets as person or vehicle so only real events make it to your phone. ANPR by camera (4 channels) When paired with Dahua ANPR cameras, the NVR stores up to 20,000 number plates with full blocklist / allowlist control — ideal for site gates, fleet yards or staff carparks. Quick Pick search Paste a person or vehicle still from any recorded clip and Quick Pick scans the timeline for matches — clothing colour, vehicle colour and direction included. Pair with WizSense IPCs to enable. AI Search across cameras Search recorded video by metadata (gender, age group, glasses, mask, beard, vehicle colour, plate, direction) or upload a face image and the NVR finds every appearance across all channels. See WizSense AI in action Dahua WizSense Quick Pick — find a person or vehicle in seconds Dahua Face Recognition — workflow on a WizSense NVR 16 MP recording · 4K display · 16 TB storage 16 MP per channel input Future-proof headroom for high-resolution Dahua bullets, domes and multi-sensors. Also handles 12 MP, 8 MP (4K), 6 MP, 5 MP and 4 MP IP cameras from any ONVIF brand. 4K HDMI + 1080p VGA Simultaneous output on both heads — drive a 4K spot monitor in the lobby and a 1080p control PC in the office. Configurable as the same view or independent layouts. 256 Mbps bandwidth 256 Mbps incoming / record / outgoing with AI off, 180 Mbps when WizSense features are active — comfortable for 8 cameras at 8 MP each. 1 SATA bay · up to 16 TB Drop in one surveillance-grade HDD (WD Purple or Seagate SkyHawk recommended) for weeks of continuous 4 MP recording across all 8 channels. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels and keeps detail on moving targets — roughly half the storage and bandwidth of standard H.264. 9-screen split layouts 1 / 4 / 8 / 9 split-screen layouts on both monitor outputs. Drag-and-drop channel reorder, instant playback, and smart-search-from-thumbnail in the local GUI. Built for installers, simple for end-users ONVIF 21.12 (T / S / G) Drops into any ONVIF VMS and natively accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon — plus Dahua's full IP range. DMSS mobile app Free iOS / Android viewer with live view, playback, push notifications, two-way audio and P2P remote access — no static IP, no port forwarding, no DDNS account needed. Local + web GUI Connect a mouse and HDMI monitor for full local setup, or use any modern browser (Chrome, Firefox, Edge) for full remote configuration. Security Baseline 2.3 Dahua's hardened security baseline — strong-password enforcement, HTTPS, IP filter, account lockout, audit logging and cybersecurity exception alarms out of the box. Compact & cool-running 260 × 232.7 × 47.6 mm at just 0.92 kg, under 10 W idle (NVR-side, no HDD). Sits flat on a shelf, in a media cabinet or under a TV — no fan noise drama. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. NVR4108HS-8P vs NVR4208-8P — how it compares Both 8-channel siblings share the same WizSense AI feature set, 8 PoE+ ports and 72 W PoE budget. The differences sit in storage, hardware alarm I/O, power supply and chassis size — choose the 4108HS (this model) for a compact desktop install, or step up to the 4208 when you need redundant storage and wired alarm integration. 8-Channel Sibling Comparison Specification NVR4108HS-8P-AI/ANZ (this model) NVR4208-8P-AI/ANZ IP channels 8 · up to 16 MP 8 · up to 16 MP WizSense AI features Identical Identical Face Recognition / Face DB 1-ch + 10 DB / 20,000 images 1-ch + 10 DB / 20,000 images Perimeter Protection 2 channels · 10 IVS rules each 2 channels · 10 IVS rules each SMD Plus 4 channels 4 channels ANPR (by camera) 4 channels · 20,000-plate DB 4 channels · 20,000-plate DB Bandwidth (AI on / off) 180 / 256 Mbps 180 / 256 Mbps PoE ports 8 · 72 W total · 25.5 W per port 8 · 72 W total · 25.5 W per port HDD bays 1 SATA · up to 16 TB 2 SATA · up to 32 TB Alarm I/O None 4 in / 2 out (physical terminals) Power supply External 53 VDC adaptor Internal 100–240 VAC PSU Chassis Compact 1U · 260 × 232.7 × 47.6 mm · 0.92 kg Full 1U · 375 × 329.3 × 53 mm · 2.51 kg Rack-mount ready Desktop primary Rack or desktop 4K HDMI · ONVIF · DMSS Yes / 21.12 / Yes Yes / 21.12 / Yes Warranty (Australia) 3 years 3 years Full Specifications Model DHI-NVR4108HS-8P-AI/ANZ Series WizSense · NVR4000-AI/ANZ (Australia / NZ market) Form factor Compact 1U · 1-HDD · rack or desktop IP channels 8 · up to 16 MP per channel Supported resolutions 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 3 MP · 1080p · 960p · 720p · D1 Bandwidth (AI off) 256 Mbps incoming / 256 Mbps record / 256 Mbps outgoing Bandwidth (AI on) 180 Mbps incoming / 180 Mbps record / 180 Mbps outgoing Decoding (AI off) 2 × 16 MP @ 30 fps · 2 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 6 × 5 MP @ 30 fps · 8 × 4 MP @ 30 fps Decoding (AI on) 1 × 16 MP @ 30 fps · 3 × 8 MP @ 30 fps · 4 × 5 MP @ 30 fps · 6 × 4 MP @ 30 fps · 8 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (independent AI chip, deep-learning) Face Detection (NVR) 1 channel · up to 12 face snapshots/sec Face Recognition (NVR) 1 ch (FD+FR by recorder) or 8 ch (FD by camera + FR by recorder) Face Database 10 databases · 20,000 images · 2.5 GB total · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 2 channels · 10 IVS rules per channel · human / vehicle filter SMD Plus 4 channels (by recorder) · 8 channels (by camera) ANPR (by camera) 4 channels · 20,000-plate database · blocklist / allowlist Quick Pick Yes (requires WizSense IPC pairing) AI Search Metadata search + face-image upload search across recorded video AI by Camera (passthrough) Face detection · Face recognition · Perimeter protection · SMD Plus · ANPR · People counting · Stereo analysis · Heat map HDD bays 1 × SATA · up to 16 TB Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · simultaneous (configurable) Multi-screen display 1st screen: 1 / 4 / 8 / 9 · 2nd screen: 1 / 4 / 8 / 9 Audio I/O 1 × RCA in · 1 × RCA out USB 2 × USB 2.0 (1 front · 1 rear) Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 8 × ports · 10/100 Mbps · IEEE 802.3af/at · 72 W total · 25.5 W per port (max) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UPnP · SNMP · RTSP · UDP · SMTP · NTP · DHCP · DNS · IP Filter · PPPoE · DDNS · FTP · Alarm Server · P2P · Auto Register ONVIF 21.12 (Profile T / S / G) · CGI · SDK Third-party camera support Panasonic · Sony · Samsung · Axis · Pelco · Arecont · Canon · ONVIF Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm Backup USB device · network Power supply 53 VDC · 1.812 A (external AS/NZS adaptor included) Power consumption < 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 260 × 232.7 × 47.6 mm (Compact 1U) Net weight 0.92 kg Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR4108HS-8P-AIANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua Smart Series HDD Installation Guide Frequently asked questions How many cameras can the built-in PoE actually power? All 8 ports deliver PoE+ up to 25.5 W each, but the total budget across the recorder is 72 W. In practice that's enough for 8 standard bullets/turrets at 5-9 W each, or about 2-3 high-power PTZ/IR-heavy cameras at 25 W each plus a few standard cams. Plan for ~9 W average per channel. Does this NVR support AcuPick? No — AcuPick is reserved for Dahua's 5-Series WizSense Plus NVRs paired with TiOC PV cameras. This is a 4-Series NVR, so it supports Quick Pick instead (the original colour/clothing-based target search). If you specifically need AcuPick, ask CCTV Guru about a 5-Series NVR. Will it work with my non-Dahua IP cameras? Yes. The NVR4108HS-8P-AI/ANZ supports ONVIF Profile T/S/G (version 21.12) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. AI features run best with Dahua WizSense cameras, but standard recording works with any ONVIF-compliant camera. What's the difference vs the 16-channel NVR4216-16P? The 4216-16P has 16 IP channels, 16 PoE ports (130 W budget), 2 SATA bays (~32 TB), 4 alarm-in / 2 alarm-out terminals, RS-232 and an internal universal-voltage PSU. The 4108HS-8P (this model) is the compact 8-channel sibling — 8 PoE @ 72 W, single HDD bay, no alarm I/O, external 53 VDC adaptor. Same AI feature set on both. What hard drive should I install? Use a surveillance-rated SATA HDD up to 16 TB — Western Digital Purple or Seagate SkyHawk. Standard desktop drives are not rated for 24/7 recording and will fail prematurely. For 8 cameras at 4 MP H.265+ on motion-record, a 4-6 TB drive gives roughly 30 days; an 8 TB drive gives 45-60 days. Can I view it on my phone? Yes — install the free DMSS app on iOS or Android, scan the QR code on the NVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. Does it have alarm input / output terminals? No — this compact chassis omits physical alarm I/O and RS-232 to keep the footprint small. If you need to wire in PIRs, sirens or gate triggers via hardware terminals, step up to the 16-channel DHI-NVR4216-16P-AI/ANZ (4 alarm-in / 2 alarm-out) or use camera-side alarm linkage instead. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

WD Purple & Purple Pro CCTV Hard Drives — 2TB to 14TB Choose a compatible 3.5-inch SATA recorder hard drive by its exact model and capacity; Purple and Purple Pro have different specifications. WD23PURZ and WD64PURZ are standard WD Purple models. WD102PURP is a Purple Pro model. D-WDHDD12TB and D-WDHDD14TB are distributor order codes; confirm the physical manufacturer model before ordering those options. Frequently asked questions Will it work with my recorder? Check the recorder compatibility list, firmware and maximum supported capacity per bay against the exact selected drive. Is the drive installed for me? This is a drive-only listing. Installation is included only when expressly stated in a recorder or system package. How long will recordings be retained? Retention depends on camera count, bitrate, recording schedule and available formatted capacity. Does one warranty apply to every option? No. Standard Purple and Purple Pro have different model-specific warranty terms. Do the 12TB and 14TB codes prove an exact WD model? No. Those distributor codes do not establish the drive label model; confirmation is required. Official manufacturer specifications and documents

Read more less

WizSense AI · 16-Channel · 16-PoE · 4K 16-Channel WizSense NVR The Dahua DHI-NVR4216-16P-AI/ANZ is a 16-channel WizSense AI NVR with 16 built-in PoE+ ports, 4K HDMI output, and dedicated deep-learning processing for face recognition, perimeter protection and SMD Plus motion analytics. Record up to 16 MP per channel, drive a 4K spot monitor and a 1080p control screen at the same time, and stream live to phones via DMSS — all from a compact 1U desktop or rack chassis. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipped with regional firmware, an Australian plug, a local 3-year warranty, and Australian tech support from CCTV Guru. Dual SATA bays accept up to 16 TB drives each, and the 130 W PoE budget powers a full row of WizSense cameras straight from the recorder — no separate PoE switch needed. 16 PoE+ ports — plug-and-play install PoE Ports 16 × 10/100 · IEEE 802.3af/at PoE Budget 130 W total · up to 25.5 W per port One cable per camera Each Cat6 run carries power and video back to the NVR — no power adaptors at every camera, no separate PoE switch in the rack. Run, terminate, plug in, done. Powers PTZ-class cameras 25.5 W per port (PoE+ / 802.3at) supports IR-heavy bullets, mini PTZs, multi-sensor cameras and TiOC active-deterrence units that draw too much for basic PoE. Gigabit uplink 10/100/1000 Mbps RJ-45 to your switch or router, so remote viewing, NAS backup and multi-site VMS pulls don't bottleneck on a 100 Mbps link. Australia / NZ-tuned firmware The AI/ANZ suffix means region-correct firmware, AS/NZS-compliant power adaptor, and a 3-year warranty backed by CCTV Guru in Sydney. WizSense AI — deep-learning that knows people from leaves Dedicated AI Chip Independent deep-learning processor Targeted Alerts Human + vehicle classification only Face Recognition 1 channel of face detection + recognition by the NVR (12 face snapshots/sec), or extend to 8 channels using camera-side detection feeding NVR-side recognition. Up to 10 face databases and 20,000 face images. Perimeter Protection 2 channels of tripwire and intrusion analytics, 10 IVS rules per channel, with human/vehicle secondary recognition to suppress false alarms from animals, leaves and changing light. SMD Plus on 4 channels Smart Motion Detection Plus runs a deep-learning second pass on motion events, filtering out weather and lighting changes so only person/vehicle events make it to your phone. ANPR by camera (4 channels) When paired with Dahua ANPR cameras, the NVR stores up to 20,000 number plates with full blocklist / allowlist control — ideal for site gate, fleet yards or staff carparks. Quick Pick search Paste a person or vehicle still from any recorded clip and Quick Pick scans the timeline for matches — clothing colour, vehicle colour and direction included. Pair with WizSense IPCs to enable. AI Search across cameras Search recorded video by metadata (gender, age group, glasses, mask, beard, vehicle colour, plate, direction) or upload a face image and the NVR finds every appearance across all channels. See WizSense AI in action Dahua WizSense Quick Pick — find a person or vehicle in seconds Dahua Face Recognition — workflow on a WizSense NVR 16 MP recording · 4K display · 32 TB storage 16 MP per channel input Future-proof headroom for high-resolution bullet, dome and multi-sensor cameras. Also accepts 12 MP, 8 MP (4K), 6 MP, 5 MP and 4 MP IP cams from Dahua and any ONVIF brand. 4K HDMI + 1080p VGA Simultaneous output on both heads — drive a 4K spot monitor in the lobby and a 1080p control PC in the office. Configurable as the same view or independent layouts. 256 Mbps bandwidth 256 Mbps incoming / record / outgoing with AI off, 180 Mbps when WizSense features are active — comfortable for 16 cameras at 4 MP each. 2 SATA bays · 32 TB max Two surveillance-grade HDD bays (WD Purple, Seagate SkyHawk recommended), up to 16 TB per drive — about a month of 16-channel continuous recording at 4 MP H.265+. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels and keeps detail on moving targets — roughly half the storage and bandwidth of standard H.264. 16-screen split layouts 1 / 4 / 8 / 9 / 16 split-screen layouts on both monitor outputs. Drag-and-drop channel reorder, instant playback, and smart-search-from-thumbnail in the local GUI. Built for installers, easy for end-users 4 alarm-in / 2 alarm-out Physical terminal block on the rear panel — wire in PIRs, door sensors, sirens or gate triggers for hardware-level event linkage and external relay control. ONVIF 21.12 (T / S / G) Drops into any ONVIF VMS, and accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon as well as Dahua's own. DMSS mobile app Free iOS / Android viewer with live view, playback, push notifications, two-way audio and P2P remote access — no static IP, no port forwarding, no DDNS account needed. Local + web GUI Connect a mouse and HDMI monitor for full local setup, or use any modern browser (Chrome, Firefox, Edge, IE9+) for full remote configuration. Security Baseline 2.3 Dahua's hardened security baseline — strong-password enforcement, HTTPS, IP filter, account lockout, audit logging and cybersecurity exception alarms out of the box. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. Full Specifications Model DHI-NVR4216-16P-AI/ANZ Series WizSense · NVR4000-AI/ANZ (Australia / NZ market) Form factor Compact 1U · rack or desktop IP channels 16 · up to 16 MP per channel Supported resolutions 16 MP · 12 MP · 8 MP · 6 MP · 5 MP · 4 MP · 3 MP · 1080p · 960p · 720p · D1 · CIF Bandwidth (AI off) 256 Mbps incoming / 256 Mbps record / 256 Mbps outgoing Bandwidth (AI on) 180 Mbps incoming / 180 Mbps record / 180 Mbps outgoing Decoding (AI off) 2 × 16 MP @ 30 fps · 4 × 8 MP @ 30 fps · 8 × 4 MP @ 30 fps · 16 × 1080p @ 30 fps Decoding (AI on) 1 × 16 MP @ 30 fps · 3 × 8 MP @ 30 fps · 12 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (independent AI chip, deep-learning) Face Detection (NVR) 1 channel · up to 12 face snapshots/sec Face Recognition (NVR) 1 ch (FD+FR by recorder) or 8 ch (FD by camera + FR by recorder) Face Database 10 databases · 20,000 images · 2.5 GB total · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 2 channels · 10 IVS rules per channel · human / vehicle filter SMD Plus 4 channels (by recorder) · 8 channels (by camera) ANPR (by camera) 4 channels · 20,000-plate database · blocklist / allowlist Quick Pick Yes (requires WizSense IPC pairing) AI Search Metadata search + face-image upload search across recorded video AI by Camera (passthrough) Face detection · Face recognition · Perimeter protection · SMD Plus · ANPR · People counting · Stereo analysis · Heat map HDD bays 2 × SATA · up to 16 TB per drive Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · simultaneous (configurable) Multi-screen display 1st screen: 1 / 4 / 8 / 9 / 16 · 2nd screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 1 × RCA out Alarm I/O 4 × alarm in · 2 × alarm out (physical terminals) USB 2 × USB 2.0 (1 front · 1 rear) Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 16 × ports · 10/100 Mbps · IEEE 802.3af/at · 130 W total · 25.5 W per port (max) RS-232 1 port Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UPnP · SNMP · RTSP · UDP · SMTP · NTP · DHCP · DNS · IP Filter · PPPoE · DDNS · FTP · Alarm Server · P2P · Auto Register ONVIF 21.12 (Profile T / S / G) · CGI · SDK Third-party camera support Panasonic · Sony · Samsung · Axis · Pelco · Arecont · Canon · ONVIF Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm Backup USB device · network Power supply 100 – 240 VAC · 47 – 63 Hz Power consumption < 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 375.0 × 329.3 × 53.0 mm (Compact 1U) Net weight 2.60 kg Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR4216-16P-AIANZ Datasheet Dahua NVR Quick Start Guide Dahua Smart Series HDD Installation Guide Frequently asked questions How many cameras can the built-in PoE actually power? All 16 ports deliver PoE+ up to 25.5 W each, but the total budget across the recorder is 130 W. In practice that's enough for ~16 standard bullets/turrets at 5-7 W each, or roughly 5 high-power PTZ/IR-heavy cameras at 25 W each. Mix accordingly, or daisy-chain a PoE injector if you need more headroom. Does this NVR support AcuPick? No — AcuPick is reserved for Dahua's 5-Series WizSense Plus NVRs paired with TiOC PV cameras. This is a 4-Series NVR, so it supports Quick Pick instead (the original colour/clothing-based target search). If you specifically need AcuPick, ask CCTV Guru about the NVR5208-8P-4KS3 family. Will it work with my non-Dahua IP cameras? Yes. The NVR4216-16P-AI/ANZ supports ONVIF Profile T/S/G (version 21.12) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. AI features run best with Dahua WizSense cameras, but recording works with any ONVIF camera. What's the difference between the AI/ANZ and the EI version? The AI/ANZ is the Australia / NZ-market SKU — same hardware as the global EI model, but with regional firmware, AS/NZS-compliant power supply, and a 3-year warranty backed locally in Australia. The EI is the European-region equivalent. Functionally identical; commercially region-specific. How much storage do I need for 16 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can I view it on my phone? Yes — install the free DMSS app on iOS or Android, scan the QR code on the NVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. Does it rack-mount? Yes — the 1U chassis (375 × 329 × 53 mm) fits a standard 19-inch rack with ears (sold separately), or sits flat on a shelf. At just 2.6 kg without HDDs, it's also fine on a sturdy desk under a monitor. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

WizSense + AcuPick · 5-Series · 8-Channel · 32 MP · 4K 8CH AcuPick NVR The Dahua DHI-NVR5208-8P-AI/ANZ is an 8-channel 5-Series WizSense AI NVR with AcuPick, 8 built-in PoE+ ports (all 8 supporting ePoE), 4K HDMI output and an industrial-grade AI chip that delivers the full 5-Series feature set in a smaller, channel-count form factor. Record up to 32 MP per channel, run AcuPick across all 8 channels, and stream 384 Mbps through a full-1U chassis with dual SATA bays, hardware alarm I/O, RS-232 + RS-485 serial, and N+M cluster failover. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipping with regional firmware, an internal 100–240 VAC universal PSU, and a local 3-year warranty backed by CCTV Guru in Sydney. The 5-Series in 8-channel format — choose this when you want AcuPick and the deeper analytics depth without paying for sixteen PoE ports you won't use. AcuPick — find anyone, anything, in seconds AcuPick Channels Up to 8 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans every channel for matches across hours or days — clothing colour, body shape, vehicle model and direction included. Front- + back-end intelligence Camera-side AI extracts the target attributes during recording; NVR-side AI runs the comparison. Higher accuracy than recorder-only search — and orders of magnitude faster than human review. All 8 channels of AcuPick Run AcuPick across every channel simultaneously when paired with WizSense IPC. Investigations that used to take an afternoon now finish before the kettle boils. Beyond Quick Pick AcuPick is the next generation of Dahua's Quick Pick — more attributes, more accuracy, and supports both people and vehicles natively. Exclusive to the 5-Series NVR family. 5-Series WizSense AI — depth without compromise Industrial AI Chip Same depth as the 16-ch flagship Face Database 20 databases · 20,000 images Face Recognition (2 ch by NVR) 2 channels of full face detection + recognition by the recorder (12 face snapshots/sec each), or up to 8 channels using camera-side detection feeding NVR-side recognition (16 face snapshots/sec). Twenty face databases. Perimeter Protection (4 ch) 4 NVR-side channels of tripwire and intrusion analytics with 10 IVS rules each — double the 4-Series. Human/vehicle classification cuts false alarms from animals, weather and lighting. SMD Plus on 8 channels Smart Motion Detection Plus runs deep-learning second-pass classification across all 8 channels — every camera benefits, no channels left out. ANPR by camera (8 channels) Pair with Dahua ANPR cameras for full 8-channel licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Ideal for site gates, carparks and fleet yards. Video Metadata search Search recorded video by structured attributes — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for critical sites. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 32 MP recording · 4K display · 32 TB storage Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 5 MP and 4 MP IP cameras from any ONVIF brand. 384 Mbps bandwidth 384 Mbps incoming / record / outgoing with AI off, 200 Mbps with AI active — enough for 8 cameras at 8 MP each, or a mix of 32 MP / 8 MP feeds. 4K HDMI + 1080p VGA Heterogeneous output — drive a 4K spot monitor on HDMI and a 1080p control PC on VGA, each running independent layouts. 9-split available on both screens. 2 SATA bays · ~32 TB max Two surveillance-grade HDD bays (WD Purple, Seagate SkyHawk) up to 16 TB per drive. iSCSI adds external network storage when on-board capacity isn't enough. 32-channel 1080p decoding Far more horsepower than the channel count suggests — happily decodes a sub-stream wall of 32 1080p tiles for control-room monitor walls. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels while preserving detail on moving targets — roughly half the storage and bandwidth of standard H.264. ePoE · alarm I/O · serial — built for installers ePoE on all 8 ports Every PoE port supports Dahua ePoE — extended-distance PoE up to 800 m on Cat6 (and 300 m at full 100 Mbps). Eliminates intermediate switches on long perimeter runs. 4 alarm-in / 2 alarm-out Physical terminal block on the rear panel — wire in PIRs, door sensors, glass-break detectors, panic buttons, sirens or gate triggers for hardware-level event linkage. RS-232 + RS-485 Both serial standards present — integrate with POS systems, gate controllers, access control panels, intercoms or third-party VMS that need legacy serial. ONVIF 22.06 (T / S / G) Modern ONVIF profile support — drops into any current VMS, and accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon as well as Dahua. DMSS mobile + iSCSI storage Free iOS / Android DMSS viewer with live view, playback, push notifications and P2P remote access. iSCSI lets you expand storage onto any compatible network appliance. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. NVR5208-8P vs the family — where it sits Three Dahua NVRs share a similar shape — all full-1U, 2-HDD, with alarm I/O. The 5208-8P (this model) and 5216-16P are both 5-Series with AcuPick and 32 MP capability; the 4208-8P is the 4-Series cost-effective alternative. Pick by channel count and AI depth. 5-Series vs 4-Series Comparison Specification NVR5208-8P-AI/ANZ (this model) NVR5216-16P-AI/ANZ NVR4208-8P-AI/ANZ AI tier 5-Series · AcuPick 5-Series · AcuPick 4-Series · Quick Pick AcuPick Up to 8 channels Up to 16 channels No IP channels 8 16 8 Max camera resolution 32 MP 32 MP 16 MP Bandwidth (AI off / on) 384 / 200 Mbps 384 / 200 Mbps 256 / 180 Mbps Face Detection (NVR) 2 channels 2 channels 1 channel Face Database 20 databases · 20,000 images 20 databases · 20,000 images 10 databases · 20,000 images Perimeter Protection (NVR) 4 channels 4 channels 2 channels SMD Plus (NVR) 8 channels 8 channels 4 channels ANPR (by camera) 8 channels 8 channels 4 channels Video metadata search Yes Yes Limited PoE ports / budget 8 × 130 W · ALL ePoE 16 × 130 W · 1–8 ePoE 8 × 72 W · no ePoE RS-232 / RS-485 Both Both Neither USB 1 × 2.0 + 1 × 3.0 1 × 2.0 + 1 × 3.0 2 × USB 2.0 ONVIF 22.06 (T / S / G) 22.06 (T / S / G) 21.12 (T / S / G) N+M cluster · iSCSI Yes / Yes Yes / Yes No / No HDD bays · 4K HDMI 2 SATA · Yes 2 SATA · Yes 2 SATA · Yes Warranty (Australia) 3 years 3 years 3 years Full Specifications Model DHI-NVR5208-8P-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor Full 1U · 2-HDD · rack or desktop IP channels 8 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 20 fps · 2 × 24 MP @ 20 fps · 4 × 16 MP @ 30 fps · 5 × 12 MP @ 30 fps · 8 × 8 MP @ 30 fps Decoding (AI on) 1 × 32 MP @ 20 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 8 × 5 MP @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 8 channels · 1 combined event per channel/sec (AI by Camera + Recorder) Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 8 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · 8 channels by camera · 10 IVS rules per channel SMD Plus 8 channels by NVR · 8 channels by camera Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) 8 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster Yes (high-availability failover) iSCSI Yes (network storage expansion) HDD bays 2 × SATA · up to 16 TB per drive Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · heterogeneous (independent layouts) Multi-screen display Main screen: 1 / 4 / 8 / 9 · Sub screen: 1 / 4 / 8 / 9 Audio I/O 1 × RCA in · 1 × RCA out Alarm I/O 4 × alarm in · 2 × alarm out (physical terminals) USB 1 × front USB 2.0 · 1 × rear USB 3.0 Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 8 × ports · 10/100 Mbps · IEEE 802.3af/at · 130 W total · 25.5 W per port · ALL 8 ports support ePoE RS-232 / RS-485 1 / 1 Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UDP · SNMP · NTP · DHCP · DNS · SMTP · UPnP · IP Filter · PPPoE · FTP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF 22.06 (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Samsung Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 47 – 63 Hz (internal universal-voltage PSU) Power consumption ≤ 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 375 × 329.4 × 53 mm (Full 1U) Net weight 2.57 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5208-8P-AI/ANZ Datasheet DHI-NVR5208-8P-AI/ANZ Quick Start Guide Dahua NVR User Manual DHI-NVR5208-8P-AI/ANZ Dimension Drawing Dahua NVR HDD Installation Guide Frequently asked questions What is AcuPick and how is it different to Quick Pick? AcuPick is Dahua's next-generation video search technology — it uses BOTH camera-side and NVR-side AI to extract rich attributes (clothing, body shape, vehicle make/model/colour/plate, direction, action) from every frame as it records, then lets you search by a reference image OR by combined attributes. Quick Pick (on the 4-Series) does single-attribute colour/clothing search only. AcuPick is faster, more accurate, and supports both people and vehicles natively. Do I need special cameras for AcuPick? Yes — AcuPick relies on camera-side intelligence to extract attributes during recording. You need Dahua's AcuPick-ready cameras (typically the TiOC PV and 5-Series WizSense Plus IPC families). Standard WizSense cameras still record and recognise faces, but the full AcuPick search depth needs paired AcuPick IPCs. What does ePoE on all 8 ports give me? Extended PoE on every port — long-distance Cat6 runs at reduced speed. Each port supports 100 Mbps up to 300 m or 10 Mbps up to 800 m (most IP cameras work fine at 10 Mbps for sub-stream + main-stream H.265+). Eliminates intermediate switches on long perimeter, carpark or warehouse runs. A real advantage over the 4-Series, which doesn't have ePoE on any port. Should I get the 5208 or the 16-channel 5216? If you need more than 8 cameras now or expect to scale within the warranty period, choose the 5216-16P — it's the same hardware platform but doubles the PoE port count and AcuPick channels. If 8 channels covers your site and you'd rather save the budget for better cameras or longer storage, the 5208 (this model) is the sweet spot — same chassis, same AI features, same warranty. Should I get the 5208 or the cheaper 4208-8P? Same 8 channels, same alarm I/O and 2-HDD chassis — but the 5208 (this model) adds AcuPick, 32 MP support, 384 Mbps bandwidth, ePoE on all 8 ports, RS-485 serial, USB 3.0, video metadata search, N+M cluster failover and iSCSI. Choose the 5208 if AcuPick or 32 MP cameras are on the roadmap; choose the 4208 if you're certain you'll stay on 16 MP or lower and don't need ePoE. Will it work with my non-Dahua IP cameras? Yes. The NVR5208-8P-AI/ANZ supports ONVIF Profile T/S/G (version 22.06) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. Standard recording works with any ONVIF camera; AcuPick and the deeper AI search features require Dahua WizSense / AcuPick IPCs. How much storage do I need for 8 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

HiLook · 2 × 6MP ColorVu Turret · 24/7 Full-Colour & Active Deterrence · 4-CH 4K PoE NVR 2 × 6MP · 4-CH PoE Kit HiLook 2× 6MP ColorVu Turret CCTV Kit — Australian Stock & 3-Year Warranty This complete starter kit pairs two HiLook IPC-T269H-MU/SL 6 MP all-in-one turret cameras with the HiLook NVR-104MH-C/4P 4-channel 4K PoE recorder — everything you need to protect a home, shopfront, rental or small office out of one box. Each camera delivers 6 MP (3072 × 2048) detail, a built-in strobe light and two-way audio for active deterrence, plus smart IR to 30 m for round-the-clock cover. The NVR's four built-in PoE ports power and connect both cameras over a single Cat6 cable each, with room to grow to four cameras later. Backed by genuine Australian stock and a 3-year warranty. Cameras 2 × 6MP Turret Resolution 6 MP · 3072 × 2048 Recorder 4-CH 4K NVR PoE 4 Built-In Ports Storage 1 SATA · up to 8 TB Warranty 3-Year AU 24/7 Full-Colour ColorVu The IPC-T269H-MU/SL keeps recording in colour after dark with smart dual-light, so number plates, clothing and vehicles stay identifiable instead of washing out to grey infrared. Active Deterrence Built In A flashing strobe and two-way audio let the camera warn off intruders the moment motion is detected — and let you speak to visitors live through the Hik-Connect app. True PoE Plug & Play Both cameras auto-discover on the NVR's four built-in PoE ports over a single Cat6 cable each. No injectors, no IP addressing — most installs are running in under an hour. Room to Grow to 4 The NVR-104MH-C/4P is a full 4-channel recorder, so you can add two more HiLook cameras to the spare PoE ports later without replacing any hardware. What's Included 2 × Cameras IPC-T269H-MU/SL — 6 MP ColorVu turret, strobe + two-way audio (White or Black) 1 × Recorder NVR-104MH-C/4P — 4-channel 4K NVR with 4 built-in PoE ports Power Cameras powered over PoE (IEEE 802.3af) from the NVR; NVR ships with its AC power adapter Storage 1 × 3.5" SATA bay (up to 8 TB). HDD not included — add a surveillance-grade drive at checkout Mounting Turret mounting screws and wall anchors included with each camera Warranty 3-Year Australian warranty, local CCTV Guru support Best For Homes & ApartmentsCover the front door and a side gate or driveway with full-colour night footage. Small Retail & CafésWatch the entrance and POS counter; strobe + audio deter shoplifters before they act. Rentals & AirbnbMonitor entry points remotely and talk to guests or tradespeople via Hik-Connect. Small OfficesFront entry and back door coverage with smart alerts you can check from your phone. Construction SitesIP67 cameras handle the elements; active deterrence warns off after-hours intruders. Garages & ShedsKeep eyes on tools, vehicles and machinery with full-colour evidence around the clock. Camera Specifications — IPC-T269H-MU/SL Image Sensor 1/2.5" Progressive Scan CMOS Max. Resolution 6 MP — 3072 × 2048 Lens Fixed 2.8 mm wide angle Night Vision Smart IR up to 30 m; ColorVu full-colour with white light Active Deterrence Strobe light + two-way audio (built-in mic & speaker) Smart Detection Motion, line crossing, intrusion, video tampering Compression H.265+/H.265/H.264+/H.264 Power PoE IEEE 802.3af or 12 VDC Weather Rating IP67 dust & water resistant Operating Temp. −30 °C to 60 °C Recorder Specifications — NVR-104MH-C/4P Channels 4-channel IP, with 4 built-in PoE ports Max. Incoming Bandwidth 40 Mbps Decoding 1-ch @ 8 MP (30 fps) or 5-ch @ 1080p (30 fps) Video Output HDMI up to 4K (4096 × 2160 @ 30 Hz); VGA up to 1080p Compression H.265+/H.265/H.264+/H.264 Storage 1 × SATA bay, up to 8 TB HDD Network 1 × RJ-45 10/100 Mbps + 4 × PoE Remote Access Hik-Connect app (iOS & Android), iVMS-4200 CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 2-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Installation Notes Run one Cat6 cable from each camera back to a PoE port on the NVR — no separate power supply needed at the camera. Mount cameras 2.5–3 m high, angled slightly down, and keep IR away from nearby walls or eaves to avoid glare. Fit a surveillance-grade HDD (e.g. WD Purple or Seagate SkyHawk) into the single SATA bay before first recording — the drive is not pre-installed. Downloads & Resources IPC-T269H-MU/SL Datasheet NVR-104MH-C/4P Datasheet All-in-One Camera Brochure HiLook NVR 7-Step Setup Guide Frequently Asked Questions What's included in this kit?Two HiLook IPC-T269H-MU/SL 6 MP turret cameras and one NVR-104MH-C/4P 4-channel 4K PoE NVR, plus camera mounting hardware and the NVR power adapter. Is a hard drive included?No. The NVR has one SATA bay for up to an 8 TB drive — add a surveillance-grade HDD at checkout. It is supplied with the kit but not pre-installed if you add one, ready to fit. How much footage will it store?Estimate the hard drive capacity and recording time for this 2-camera kit using your preferred recording settings. Use our storage calculator for an estimate based on your settings. Does it record in colour at night?Yes — ColorVu with smart dual-light keeps footage in full colour after dark, switching to white light when motion is detected. What is active deterrence?Each camera has a strobe light and a built-in speaker so it can flash and sound a warning when motion is detected, plus two-way audio so you can speak to visitors live. How are the cameras powered?Over a single Cat6 cable each using the NVR's built-in PoE ports (IEEE 802.3af) — no separate power supply at the camera. Can I add more cameras later?Yes. The NVR is a 4-channel recorder with four PoE ports, so you can add two more HiLook cameras without buying a new NVR. Can I view it on my phone?Yes — the free Hik-Connect app (iOS & Android) gives remote live view and playback with no port forwarding or static IP required. Are the cameras weatherproof?Yes, both cameras are IP67 rated and operate from −30 °C to 60 °C, suitable for outdoor use anywhere in Australia. What colour are the cameras?The IPC-T269H-MU/SL is available in White or Black — choose your preferred finish when ordering. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

8-Channel XVR · Dahua WizSense · Penta-brid 4K · AI SMD Plus · HDCVI + IP 8CH WizSense XVR Dahua DH-XVR5108HS-4KL-I3-S3 — 8 Channel Penta-brid 4K WizSense XVR The Dahua DH-XVR5108HS-4KL-I3-S3 is the definitive 8-channel recorder for Australian installers and integrators who need 4K recording, AI-powered analytics, and maximum camera flexibility in a compact 1U chassis. As a true Penta-brid XVR, it accepts HDCVI, AHD, TVI, CVBS, and IP cameras on the same unit — protecting your existing coaxial cable investment while giving you a clear upgrade path to full IP. Powered by Dahua's WizSense AI engine, the S3 delivers SMD Plus (Smart Motion Detection) across all 8 channels, Perimeter Protection on 2 channels, and human face recognition on 2 channels — dramatically reducing false alarms and making footage search fast and accurate. HDD not included — add a surveillance-grade drive at checkout. Channels 8 Analogue + 16 IP Max Resolution 4K (8MP) AI SMD Plus · Face Detection Inputs HDCVI / AHD / TVI / IP Bandwidth 128 Mbps Incoming Storage 1 × HDD Bay (No HDD) Australian Stock · Fast Dispatch Dahua Manufacturer Warranty Expert Australian Tech Support Key Features Penta-brid Flexibility — 5 Camera Types, 1 Recorder Accepts HDCVI, AHD, TVI, CVBS analogue cameras and IP cameras simultaneously. Reuse existing coaxial cable infrastructure while adding IP cameras on the same NVR. No rip-and-replace required. 4K Recording (8MP) Records analogue channels at up to 4K resolution via HDCVI, and IP channels at up to 8MP. Capture faces, plates, and fine detail with confidence — even on wide-angle shots. WizSense AI — SMD Plus on All 8 Channels Smart Motion Detection Plus uses deep learning to distinguish humans and vehicles from animals, foliage, and environmental noise. Dramatically reduces false alarms and makes event search fast and precise. Perimeter Protection (2 Channels) Define virtual tripwires and intrusion zones on up to 2 analogue channels. The XVR triggers alerts only when a human or vehicle crosses the boundary — not every time a leaf blows past. Face Detection & Recognition (2 Channels) Detect and log faces on up to 2 channels. Search recorded footage by face attributes in seconds — no more scrubbing through hours of video to find a specific person. Expandable to 16 IP Channels The 8 BNC ports handle analogue cameras, but the XVR can simultaneously manage up to 16 IP camera channels at up to 8MP each — giving you a clear upgrade path without replacing the recorder. H.265+ Compression H.265+ dual-stream compression reduces storage consumption by up to 75% versus H.264 — meaning your HDD lasts longer and your bandwidth stays manageable. Remote Access via DMSS & SmartPSS Monitor live and recorded footage from anywhere via the DMSS mobile app (iOS & Android) or SmartPSS desktop client. P2P connection — no static IP or port forwarding required. Recommended For Analogue Camera Upgrades Already have coaxial cable runs? Keep them. The Penta-brid XVR connects your existing analogue cameras while letting you add IP cameras on the same recorder — a cost-effective upgrade path. Small Retail & Convenience Stores 8 channels covers entry, POS counter, stockroom, and car park. SMD Plus filters out false alarms from foot traffic — only genuine intrusion events trigger notifications. Warehouses & Industrial Sites Perimeter Protection on 2 channels secures loading docks and yard boundaries. Face detection logs who enters the office or server room. Small Offices & Commercial Premises Compact 1U chassis fits in a server rack or comms cabinet. Remote access via DMSS keeps management informed without on-site visits. Residential Homes 8 channels covers every entry point, garage, and outdoor area. H.265+ compression maximises HDD retention time. DMSS app provides instant mobile alerts. Schools & Childcare Centres AI-powered SMD Plus reduces nuisance alerts in busy environments. Face detection supports access logging at entry points. Add a Surveillance HDD HDD Not Included — Choose Your Capacity The DH-XVR5108HS-4KL-I3-S3 has 1 × 3.5" SATA HDD bay. We recommend a WD Purple or Seagate SkyHawk surveillance-grade drive — purpose-built for 24/7 DVR workloads. Contact our team for a retention calculation based on your camera count, resolution, and recording schedule. CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Technical Specifications Video Input 8 × BNC (HDCVI / AHD / TVI / CVBS) · Up to 16 × IP camera channels · Max 8MP per IP channel Max Recording Resolution 4K (3840 × 2160) via HDCVI · 8MP via IP Compression H.265+ / H.265 / H.264+ / H.264 dual-stream · Full-channel AI Coding support AI Features SMD Plus (8 channels) · Perimeter Protection (2 channels) · Face Detection & Recognition (2 channels) · IoT & POS integration Bandwidth & Storage 128 Mbps incoming bandwidth · 1 × SATA HDD bay (up to 20TB) · HDD not included Network & Remote Access TCP/IP · P2P · DMSS app (iOS & Android) · SmartPSS desktop · ONVIF · 1 × RJ45 10/100M Video Output 1 × HDMI (4K) · 1 × VGA · Simultaneous output supported Form Factor & Power Compact 1U chassis · Smart Fan (temperature-controlled) · 12V DC · Operating temp: -10°C to +55°C More Information Datasheet (S3) Quick Start Guide User Manual Frequently Asked Questions Does the XVR include an HDD?No — an HDD is not included. Add a WD Purple or Seagate SkyHawk surveillance-grade drive at checkout. Contact us for a sizing recommendation based on your camera count and recording schedule. Can I connect IP cameras to this XVR?Yes — the DH-XVR5108HS-4KL-I3-S3 supports up to 16 IP camera channels at up to 8MP each, in addition to the 8 BNC analogue inputs. What analogue camera types are supported?HDCVI, AHD, TVI, and CVBS (standard definition) cameras are all supported on the BNC inputs — mix and match as needed. What is SMD Plus?Smart Motion Detection Plus uses deep learning AI to distinguish humans and vehicles from animals, foliage, and other false triggers. It dramatically reduces nuisance alerts and makes footage search faster. Can I view footage remotely?Yes — the DMSS app (iOS & Android) and SmartPSS desktop client provide remote access via P2P. No static IP or port forwarding required. What is the difference between S2 and S3?The S3 is the updated hardware revision with improved AI processing and compatibility. It uses the same form factor and feature set as the S2 but with enhanced WizSense performance. How many HDD bays does it have?One 3.5" SATA HDD bay, supporting drives up to 20TB. Only one HDD can be installed. Does it support 4K recording?Yes — up to 4K (3840 × 2160) via HDCVI cameras, and up to 8MP via IP cameras. What's the warranty?Dahua manufacturer warranty, supported locally by CCTV Guru's Australian technical team. Do you ship Australia-wide?Yes — fast dispatch to every state and territory from Australian stock. Order the Dahua DH-XVR5108HS-4KL-I3-S3 from CCTV Guru CCTV Guru is an authorised Australian distributor of Dahua surveillance products. Order the Dahua DH-XVR5108HS-4KL-I3-S3 8-Channel Penta-brid 4K WizSense XVR today for fast Australia-wide dispatch, expert pre-sales advice on HDD sizing and camera compatibility, and full local warranty support. Contact our Australian team to add a surveillance HDD, compatible Dahua cameras, or a complete CCTV system package.

Read more less

Dahua · 2 × 8MP TiOC 3.0 + 4 × 8MP Smart Dual-Light · 8CH Standard or AcuPick NVR TiOC + Dual Light Dahua 6 × 8MP 24/7 Full-Colour CCTV Kit — 2 × TiOC 3.0 Active Deterrence + 4 × Smart Dual-Light + 8-Channel AI NVR This Dahua 6-camera 8MP (4K) kit records true full colour around the clock and actively deters intruders instead of just filming them: 2 × DH-IPC-HDW3849H-AS-PV-ANZ-S2 TiOC 3.0 turrets fire a siren, red/blue strobe and two-way voice warning the moment WizSense AI detects a person or vehicle — perfect at gates and entries — while 4 × DH-IPC-HDW3867EM-S-IL-ANZ Smart Dual-Light turrets give continuous full-colour coverage everywhere else. All six are 8MP 4K with SMD 4.0 AI, on an 8-channel WizSense AI NVR with 2 channels still free. Choose your recorder. The cameras are AcuPick-native, so pick the NVR that suits how you search footage: the Standard NVR4108 gives Quick Pick target search, while the AcuPick NVR5208 adds full attribute smart search — find a person or vehicle by clothing colour, vehicle type or direction of travel in seconds. Select your NVR from the drop-down above. Cameras 2 × TiOC + 4 × Dual Light Recorder 8CH · Standard or AcuPick Resolution 8MP · 4K 3840×2160 Active Deterrence Strobe + Siren (TiOC) Night Vision 24/7 Full Colour Weatherproof IP67 Rated 2 × TiOC 3.0 — Deter, Don't Just Record When WizSense AI detects a person or vehicle, the TiOC cameras fire a siren, red/blue strobe and a two-way voice warning at once — most intruders leave before they've taken a step. Talk down visitors live from the DMSS app. 4 × Smart Dual-Light — 24/7 Full Colour Each Dual-Light turret runs invisible IR until WizSense classifies a person or vehicle, then flips to warm white light for full-colour evidence — capturing clothing and vehicle colour that IR-only cameras miss, with no permanent light pollution. 8MP 4K · SMD 4.0 AI 3840×2160 on every channel — four times the detail of 1080p. SMD 4.0 classifies people and vehicles and ignores animals, foliage and headlights, so only real events reach your phone. 8-Channel PoE NVR — Standard or AcuPick Compact, fanless and silent, the 8CH AI NVR has 8 built-in PoE ports for plug-and-play install, 4K HDMI output and free DMSS remote viewing — with 2 channels still free. Upgrade to the NVR5208 for full AcuPick attribute smart search. What's Included 2 × TiOC Cameras DH-IPC-HDW3849H-AS-PV-ANZ-S2 — 8MP TiOC 3.0 active-deterrence turret: siren, red/blue strobe, two-way audio, dual illuminators (IR 30 m + warm 30 m), SMD 4.0, IP67. Best at gates and entries. 4 × Dual-Light Cameras DH-IPC-HDW3867EM-S-IL-ANZ — 8MP Smart Dual-Light turret, 2.8 mm, IR 30 m + warm light, built-in mic, IP67. Continuous full-colour coverage for the rest of the property. 1 × Recorder Choose at checkout: DHI-NVR4108HS-8P-AI/ANZ (Standard) — 8-channel 4K WizSense AI NVR, 8 built-in PoE ports, 1 SATA bay, 4K HDMI, SMD 4.0, Quick Pick, DMSS remote access. Or upgrade to the DHI-NVR5208-8P-AI/ANZ (AcuPick) — same 8 PoE ports plus full AcuPick attribute smart search (find a person or vehicle by clothing colour, vehicle type or direction). 6 channels used, 2 spare. Power 8 × PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay (HDD up to 10 TB) — not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Dahua ANZ stock. Available in white or black. Best For Residential homes TiOC at the front gate and driveway; Dual-Light cover of side gates, garage and backyard. Retail & convenience TiOC deters shoplifters at the entry; Dual-Light covers the POS counter and stockroom in colour. Warehouses & industrial TiOC at loading docks deters after-hours intruders; Dual-Light covers large open areas in 8MP. Offices & commercial Full-colour footage captures clothing and vehicle colour — critical for insurance and police reports. Childcare & schools 24/7 colour footage for incident review and duty-of-care; SMD 4.0 cuts nuisance alerts. Airbnb & rentals TiOC at entry points deters damage; MicroSD edge storage backs up if the NVR is tampered with. TiOC 3.0 Camera — DH-IPC-HDW3849H-AS-PV-ANZ-S2 (×2) Camera Type 8MP TiOC 3.0 AcuPick Active-Deterrence Full-Colour Turret (WizSense) Max. Resolution 8MP · 3840 × 2160 @ 25/30 fps Lens Fixed 2.8 mm Night Vision IR 30 m + Warm Light 30 m · full-colour 24/7 Active Deterrence Siren · red/blue strobe lights · voice warning Audio Built-in dual mic · 1-ch speaker · two-way talk AI SMD 4.0 · AcuPick (with 5-Series NVR) · Perimeter Protection Power / Ingress PoE 802.3af · 12 VDC · IP67 · –30 °C to +60 °C Warranty (Australia) 3 years · CCTV Guru Australia Smart Dual-Light Camera — DH-IPC-HDW3867EM-S-IL-ANZ (×4) Camera Type 8MP 4K Smart Dual-Light Turret WizSense Network Camera Max. Resolution 3840 × 2160 (8MP / 4K) @ 20 fps Lens Fixed 2.8 mm · 105° horizontal FOV Night Vision IR 30 m + Warm Light 30 m · full-colour 24/7 (IR mode selectable) AI SMD · AcuPick (with 5-Series NVR) · IVS (Tripwire, Intrusion) Audio Built-in microphone (one-way) Power / Ingress PoE 802.3af · 12 VDC · IP67 · –30 °C to +60 °C Warranty (Australia) 3 years · CCTV Guru Australia Installation Notes ›Camera placement: put the 2 TiOC active-deterrence cameras at entry points (gates, doors, loading docks) and the 4 Dual-Light cameras across general coverage. ›Cabling & sealing: run solid-copper Cat6 (max 100 m per camera) and seal outdoor RJ-45 joins with a junction box or weatherproof tape against moisture and salt air. ›Audio & alarm: set TiOC siren volume to suit the site, and check local audio-recording laws before enabling sound recording. See It In Action & Set It Up — Official Dahua TiOC active deterrence in action — Dahua Technology (official) First-time NVR setup, step by step — Dahua Technology UK & Ireland Downloads & Resources DH-IPC-HDW3849H-AS-PV-ANZ-S2 (TiOC 3.0) Datasheet DH-IPC-HDW3867EM-S-IL-ANZ (Dual-Light) Datasheet DHI-NVR4108HS-8P-AI/ANZ (8CH) Datasheet DHI-NVR5208-8P-AI/ANZ (AcuPick) Datasheet Dahua Network Camera Quick Start Guide Dahua Network Video Recorder User Manual What's the difference between the TiOC and Dual-Light cameras?The 2 TiOC cameras add active deterrence — a siren, red/blue strobe and two-way voice warning — so they scare intruders off, not just record. The 4 Dual-Light cameras give continuous full-colour coverage. All six are 8MP 4K. Do all cameras record in colour at night?Yes — all 6 use a warm-light illuminator for 24/7 full colour. If you'd prefer no visible light somewhere, the Dual-Light cameras can be switched to IR mode for discreet black-and-white at night. Does this kit do AcuPick?Yes — choose the AcuPick NVR5208 option from the drop-down. The cameras are AcuPick-native, and the NVR5208 adds full attribute smart search: find a person or vehicle by clothing colour, vehicle type or direction of travel. The Standard NVR4108 option still gives Quick Pick target search. Does a hard drive come included?No — the NVR has one SATA bay (up to 10 TB) but ships without storage. For 6 × 8MP on motion-only, ~2 TB gives 7–10 days, ~4 TB gives 14–20 days; choose more for continuous recording. Can I add more cameras later?Yes. The NVR has 8 PoE ports and you're using 6, so you can add up to 2 more cameras by plugging them into the spare ports — no recorder upgrade needed. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 6-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode.

Read more less

UniFi OS Console — NDAA Compliant Ubiquiti UDM-Pro — All-in-One UniFi OS Gateway, Network Controller & UniFi Protect NVR The UniFi Dream Machine Pro (UDM-Pro) is Ubiquiti's flagship all-in-one UniFi OS Console — combining an enterprise-grade security gateway, the UniFi Network controller, a UniFi Protect NVR, and a threat-management engine in a single 1U rack-mount device. Driven by a fast 1.7 GHz quad-core processor, with 8 × Gigabit RJ45 LAN, dual 10G SFP+ (WAN + LAN), and a 3.5″ HDD bay for local camera recordings, the UDM-Pro is the ideal foundation for professional home, office, and small-business networks across Australia — with genuine Ubiquiti stock and fast Australia-wide shipping. LAN Ports 8 × GbE + 10G WAN GbE + 10G SFP+ NVR Storage 3.5″ HDD Bay Threat Mgmt 3.5 Gbps IDS/IPS Why Choose the UniFi Dream Machine Pro? All-in-One UniFi OS Console Runs the complete UniFi application suite — UniFi Network, UniFi Protect, and more — from a single device. Eliminates the need for separate controllers, gateways, and NVR hardware. Enterprise Security Gateway A full security gateway with advanced threat management, IDS/IPS (up to 3.5 Gbps), traffic identification, and deep packet inspection — protecting your network at speed. 8 × Gigabit LAN + 10G SFP+ LAN Nine LAN ports including eight Gigabit RJ45 and one 10G SFP+ — enough to connect switches, APs, and devices directly without extra hardware for smaller deployments. Dual WAN — GbE + 10G SFP+ One Gigabit RJ45 WAN and one 10G SFP+ WAN port support dual-WAN failover and load balancing — keeping your network online even if one ISP connection drops. Built-in UniFi Protect NVR The 3.5″ HDD bay enables local UniFi Protect camera recordings directly on the UDM-Pro — no separate NVR required for smaller camera deployments. UniFi Network Controller Pre-Installed Manage your entire UniFi network — switches, access points, and clients — through the built-in UniFi Network application. No separate cloud key or controller hardware needed. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your network and cameras running during power events. NDAA Compliant Fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive Australian installations where supply-chain integrity is required. Ideal Use Cases Small to Medium Business Replace multiple separate devices — gateway, controller, NVR — with a single UDM-Pro. Ideal for offices, retail stores, and professional services firms. Advanced Home Networks Power users and home-lab enthusiasts who want enterprise-grade routing, threat management, and UniFi Protect camera recording in one clean rack-mount unit. UniFi Protect Camera Systems The UDM-Pro doubles as a UniFi Protect NVR — connect UniFi cameras and record locally without a separate UNVR. Multi-WAN & Failover Deployments Businesses requiring dual-WAN failover or load balancing across fibre and 4G/5G connections for maximum uptime. Technical Specifications Model UDM-Pro Form Factor 1U rack-mount Processor 1.7 GHz quad-core System Memory 4 GB LAN Ports 8 × Gigabit RJ45 • 1 × 10G SFP+ WAN Ports 1 × Gigabit RJ45 • 1 × 10G SFP+ IDS/IPS Throughput Up to 3.5 Gbps HDD Bay 1 × 3.5″ SATA (for UniFi Protect, drive not included) UniFi Applications UniFi Network • UniFi Protect • UniFi OS Threat Management IDS/IPS, traffic identification, deep packet inspection Power Redundancy USP-RPS compatible (sold separately) Management UniFi OS • UniFi app (iOS/Android) • Web UI Display 1.3″ touchscreen Compliance NDAA compliant What's in the Box UDM-Pro Unit All-in-one UniFi OS Console with pre-installed UniFi Network and UniFi Protect. Rack-Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included 3.5″ HDD for UniFi Protect storage and cameras are sold separately. Frequently Asked Questions Does the UDM-Pro require a UniFi subscription? No. UniFi Network and UniFi Protect run fully locally on the UDM-Pro. There are no monthly fees or cloud subscriptions required for full functionality. Can the UDM-Pro run UniFi Protect for cameras? Yes. Install a 3.5″ HDD in the built-in bay and the UDM-Pro acts as a UniFi Protect NVR — supporting UniFi cameras for local recording and AI detection. What is the difference between the UDM-Pro and UDM-SE? The UDM-SE adds 8 × built-in PoE ports (allowing direct camera and AP power), a 2.5 GbE RJ45 WAN port, and an internal M.2 storage option. The UDM-Pro has no built-in PoE but offers dual 10G SFP+ and is well suited to pure routing/gateway and NVR deployments. Does it support dual-WAN failover? Yes. The UDM-Pro supports dual-WAN failover and load balancing across the Gigabit RJ45 WAN and 10G SFP+ WAN ports. What hard drive do I need for UniFi Protect? Any compatible 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording reliability. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Is the UDM-Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UDM-Pro is NDAA Section 889 compliant — suitable for government and security-sensitive Australian sites. Downloads & Resources UDM-Pro Tech Specs Quick Start Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ (UNVR-Pro) The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Flexible Recording Storage Install up to seven 2.5″ or 3.5″ SATA drives for high-capacity local storage. Use our storage calculator to estimate retention for your UniFi Protect cameras and RAID configuration. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Depends on installed drives, RAID configuration and recording settings; use our storage calculator. Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis Compliance NDAA compliant CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Downloads & Resources UNVR Pro Datasheet Installation Guide What's in the Box UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. Rack Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Best For Large Commercial & Enterprise Sites Factories, warehouses, and logistics hubs needing enterprise-grade recording capacity with RAID redundancy. Schools, Universities & Campuses Multi-building campuses where long retention, high camera counts, and reliable RAID storage are non-negotiable. Office Towers & Strata Complexes High-rise offices and strata complexes with server-room infrastructure and large camera deployments. Maximum-Scale UniFi Protect Systems The top-tier UniFi Protect NVR for deployments needing maximum storage, RAID protection, and enterprise uplink speeds. Mounts in any standard 2U rack space — server rooms, comms cabinets, and data centres. Pair with a UniFi PoE switch to power and manage cameras from a single pane of glass. Use surveillance-grade SATA drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording. Add a USP-RPS Power Backup for power redundancy on critical installs. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives such as WD Purple Pro or Seagate SkyHawk AI. Check Ubiquiti's HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What's the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Is the UNVR Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UNVR Pro is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Relevant Add-ons & Accessories UniFi Protect ViewPort PoE HDMI Adapter Display the UNVR Pro's UniFi Protect camera feeds on an HDMI monitor or television. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

WizSense AI · 4-Channel · 4-PoE · 4K 4CH WizSense NVR The Dahua DHI-NVR4104HS-P-AI/ANZ is a 4-channel WizSense AI NVR with 4 built-in PoE+ ports, 4K HDMI output, and a dedicated deep-learning chip for face recognition, perimeter protection and SMD Plus motion analytics. Record up to 16 MP per channel, plug all four cameras directly into the back of the recorder, and view live or playback from your phone via DMSS — all from a compact desktop chassis small enough to live in a media cabinet. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipping with regional firmware, an AS/NZS-compliant 53 VDC adaptor, and a local 3-year warranty backed by CCTV Guru in Sydney. The entry-level WizSense NVR — perfect for homes, single-shop retail, small offices and granny flats that need fewer than five cameras and the same enterprise-grade AI as the bigger Dahua recorders. 4 PoE+ ports — one cable per camera PoE Ports 4 × 10/100 · IEEE 802.3af/at PoE Budget 36 W total · up to 25.5 W per port Power + video on one cable Each Cat6 run carries power and video back to the NVR — no power adaptors at every camera, no PoE switch on the wall. Four ports cover most homes and small premises in one tidy box. Powers high-draw cameras 25.5 W per port (PoE+ / 802.3at) supports IR-heavy bullets, mini PTZs and active-deterrence cameras that exceed the basic 15 W PoE ceiling. Plug-and-play setup Dahua IP cameras auto-pair on connection — no IP address typing, no port forwarding. Connect, name the channel, and you're recording in under five minutes. Australia / NZ-tuned firmware The AI/ANZ suffix means region-correct firmware, AS/NZS-compliant 53 VDC adaptor, and a 3-year warranty backed by CCTV Guru in Sydney. WizSense AI — same deep-learning brain as the big NVRs Dedicated AI Chip Independent deep-learning processor Targeted Alerts Human + vehicle classification only Face Recognition 1 channel of face detection + recognition by the NVR (12 face snapshots/sec), or extend to 4 channels using camera-side detection feeding NVR-side recognition. Up to 10 face databases and 20,000 face images. Perimeter Protection 2 channels of tripwire and intrusion analytics, 10 IVS rules per channel, with human/vehicle secondary recognition that filters out animals, leaves and lighting changes — no more 3 am alerts from a moth on the lens. SMD Plus on all 4 channels Smart Motion Detection Plus runs a deep-learning second pass on every motion event, classifying targets as person or vehicle so only real events make it to your phone. ANPR by camera (4 channels) When paired with Dahua ANPR cameras, the NVR stores up to 20,000 number plates with full blocklist / allowlist control — ideal for driveways, single-lane gates and small carparks. Quick Pick search Paste a person or vehicle still from any recorded clip and Quick Pick scans the timeline for matches — clothing colour, vehicle colour and direction included. Pair with WizSense IPCs to enable. AI Search across cameras Search recorded video by metadata (gender, age group, glasses, mask, beard, vehicle colour, plate, direction) or upload a face image and the NVR finds every appearance across all channels. See WizSense AI in action Dahua WizSense Quick Pick — find a person or vehicle in seconds Dahua Face Recognition — workflow on a WizSense NVR 16 MP recording · 4K display · 16 TB storage 16 MP per channel input Plenty of headroom for high-resolution Dahua bullets, domes and multi-sensors. Also handles 12 MP, 8 MP (4K), 6 MP, 5 MP and 4 MP IP cameras from any ONVIF brand. 4K HDMI + 1080p VGA Simultaneous output on both heads — drive a 4K TV in the office and a 1080p monitor in the back room. Configurable as the same view or independent layouts. 80 Mbps bandwidth 80 Mbps incoming / record / outgoing — sized for 4 cameras up to 4 MP each on H.265+. Step up to the NVR4108HS or NVR4208 if you need 8 channels at 8 MP+. 1 SATA bay · up to 16 TB Drop in one surveillance-grade HDD (WD Purple or Seagate SkyHawk recommended) for months of continuous recording across all 4 channels. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels and keeps detail on moving targets — roughly half the storage and bandwidth of standard H.264. 4-screen split layouts 1 / 4 split-screen layouts on both monitor outputs. Drag-and-drop channel reorder, instant playback, and smart-search-from-thumbnail in the local GUI. Built for installers, simple for end-users ONVIF 21.12 (T / S / G) Drops into any ONVIF VMS and natively accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon — plus Dahua's full IP range. DMSS mobile app Free iOS / Android viewer with live view, playback, push notifications, two-way audio and P2P remote access — no static IP, no port forwarding, no DDNS account needed. Local + web GUI Connect a mouse and HDMI monitor for full local setup, or use any modern browser (Chrome, Firefox, Edge) for full remote configuration. Security Baseline 2.3 Dahua's hardened security baseline — strong-password enforcement, HTTPS, IP filter, account lockout, audit logging and cybersecurity exception alarms out of the box. Compact & quiet 260 × 232.7 × 47.6 mm at just 0.86 kg, under 10 W idle (NVR-side, no HDD). Sits flat on a shelf, in a media cabinet or under a TV — no fan noise drama. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. NVR4104HS-P vs NVR4108HS-8P — how it compares Both compact 1-HDD WizSense NVRs share the same chassis, the same AI feature set and the same DMSS mobile app. The 4108HS (8-channel) adds bandwidth, Gigabit uplink and more PoE budget for larger installs — the 4104HS (this model) is the cost-effective choice when you only need four cameras and want enterprise-grade AI without overspending. Compact Sibling Comparison Specification NVR4104HS-P-AI/ANZ (this model) NVR4108HS-8P-AI/ANZ IP channels 4 · up to 16 MP 8 · up to 16 MP WizSense AI features Identical Identical Face Recognition / Face DB 1-ch + 10 DB / 20,000 images 1-ch + 10 DB / 20,000 images Perimeter Protection 2 channels · 10 IVS rules each 2 channels · 10 IVS rules each SMD Plus 4 channels 4 channels ANPR (by camera) 4 channels · 20,000-plate DB 4 channels · 20,000-plate DB Bandwidth 80 Mbps in / record / out 256 Mbps (180 Mbps with AI) Network uplink 10/100 Mbps Fast Ethernet 10/100/1000 Mbps Gigabit PoE ports 4 · 36 W total · 25.5 W per port 8 · 72 W total · 25.5 W per port HDD bays 1 SATA · up to 16 TB 1 SATA · up to 16 TB Multi-screen layouts 1 / 4 1 / 4 / 8 / 9 Chassis Compact 1U · 260 × 232.7 × 47.6 mm · 0.86 kg Compact 1U · 260 × 232.7 × 47.6 mm · 0.92 kg Power supply 53 VDC · 1.226 A external adaptor 53 VDC · 1.812 A external adaptor 4K HDMI · ONVIF · DMSS Yes / 21.12 / Yes Yes / 21.12 / Yes Warranty (Australia) 3 years 3 years Full Specifications Model DHI-NVR4104HS-P-AI/ANZ Series WizSense · NVR4000-AI/ANZ (Australia / NZ market) Form factor Compact 1U · 1-HDD · rack or desktop IP channels 4 · up to 16 MP per channel Supported resolutions 16 MP · 12 MP · 8 MP · 6 MP · 5 MP · 4 MP · 3 MP · 1080p · 960p · 720p · D1 · CIF Bandwidth 80 Mbps incoming / 80 Mbps record / 80 Mbps outgoing Decoding (AI off) 2 × 16 MP @ 30 fps · 2 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps Decoding (AI on) 1 × 16 MP @ 30 fps · 2 × 12 MP @ 30 fps · 3 × 8 MP @ 30 fps · 4 × 5 MP @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (independent AI chip, deep-learning) Face Detection (NVR) 1 channel · up to 12 face snapshots/sec Face Recognition (NVR) 1 ch (FD+FR by recorder) or 4 ch (FD by camera + FR by recorder) Face Database 10 databases · 20,000 images · 2.5 GB total · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 2 channels · 10 IVS rules per channel · human / vehicle filter SMD Plus 4 channels (by recorder) · 4 channels (by camera) ANPR (by camera) 4 channels · 20,000-plate database · blocklist / allowlist Quick Pick Yes (requires WizSense IPC pairing) AI Search Metadata search + face-image upload search across recorded video AI by Camera (passthrough) Face detection · Face recognition · Perimeter protection · SMD Plus · ANPR · People counting · Stereo analysis · Heat map HDD bays 1 × SATA · up to 16 TB Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · simultaneous (configurable) Multi-screen display 1st screen: 1 / 4 · 2nd screen: 1 / 4 Audio I/O 1 × RCA in · 1 × RCA out USB 2 × USB 2.0 (1 front · 1 rear) Network port 1 × RJ-45 10 / 100 Mbps Fast Ethernet PoE 4 × ports · 10/100 Mbps · IEEE 802.3af/at · 36 W total · 25.5 W per port (max) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UPnP · SNMP · RTSP · UDP · SMTP · NTP · DHCP · DNS · IP Filter · PPPoE · DDNS · FTP · Alarm Server · P2P · Auto Register ONVIF 21.12 (Profile T / S / G) · CGI · SDK Third-party camera support Panasonic · Sony · Samsung · Axis · Pelco · Arecont · Canon · ONVIF Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm Backup USB device · network Power supply 53 VDC · 1.226 A (external AS/NZS adaptor included) Power consumption < 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 260 × 232.7 × 47.6 mm (Compact 1U) Net weight 0.86 kg Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR4104HS-P-AIANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua Smart Series HDD Installation Guide Frequently asked questions Is 80 Mbps bandwidth enough for 4 cameras? Yes — for 4 cameras at up to 4 MP each running Smart H.265+, comfortably within the 80 Mbps envelope. If you're planning to run all four channels at 8 MP @ 30 fps with the highest bitrate, you'll hit the ceiling — step up to the NVR4108HS-8P (256 Mbps) for headroom. For typical home and small-shop installs, 80 Mbps is plenty. How many cameras can the built-in PoE actually power? All 4 ports deliver PoE+ up to 25.5 W each, but the total budget across the recorder is 36 W. That comfortably runs 4 standard bullets / turrets at 5-9 W each. If you're planning a PTZ or IR-heavy camera (~15-20 W), you may need to keep the other ports on lower-draw cameras or use an external PoE injector. Does this NVR support AcuPick? No — AcuPick is reserved for Dahua's 5-Series WizSense Plus NVRs paired with TiOC PV cameras. This is a 4-Series NVR, so it supports Quick Pick instead (the original colour/clothing-based target search). If you specifically need AcuPick, ask CCTV Guru about a 5-Series NVR. Will it work with my non-Dahua IP cameras? Yes. The NVR4104HS-P-AI/ANZ supports ONVIF Profile T/S/G (version 21.12) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. AI features run best with Dahua WizSense cameras, but standard recording works with any ONVIF-compliant camera. What hard drive should I install? Use a surveillance-rated SATA HDD up to 16 TB — Western Digital Purple or Seagate SkyHawk. Standard desktop drives are not rated for 24/7 recording and will fail prematurely. For 4 cameras at 4 MP H.265+ on motion-record, a 2-4 TB drive gives roughly 30-60 days of retention. Can I view it on my phone? Yes — install the free DMSS app on iOS or Android, scan the QR code on the NVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. Why is the network port only 10/100 Mbps? The NVR4104HS-P-AI/ANZ uses Fast Ethernet on the uplink because the recorder's total bandwidth is 80 Mbps — well within Fast Ethernet capacity. The 8-channel and 16-channel siblings use Gigabit because their 256 Mbps capacity exceeds 100 Mbps. This isn't a bottleneck for this model; the 80 Mbps cap is the same number whether the port is 100 Mbps or 1 Gbps. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link VIGI NVR1004H 4-Channel Network Video Recorder Simple, Reliable IP Camera Recording for Homes and Small Businesses The TP-Link VIGI NVR1004H is a compact 4-channel network video recorder purpose-built for straightforward IP camera deployments. Supporting resolutions up to 8MP (4K) with H.265+ compression, it delivers high-quality local recording without the complexity or ongoing cost of cloud storage. Connect it to your network, add VIGI cameras, and you have a complete surveillance system — managed from your smartphone via the free VIGI app. Key Features 4-Channel IP Camera Recording — Record up to four IP cameras simultaneously at resolutions up to 8MP (4K) for sharp, detailed footage H.265+ Smart Compression — Reduces storage consumption by up to 75% compared to H.264, significantly extending hard drive recording capacity 4K HDMI & VGA Output — Connect directly to a 4K monitor or TV for crisp on-site live view and playback without a PC Plug-and-Play with VIGI Cameras — Automatically detects and adds VIGI IP cameras on the same network; minimal configuration required VIGI App Remote Access — Live view, video playback, and smart push alerts on iOS and Android from anywhere; no subscription fee required AI Person & Vehicle Detection — Receives smart detection alerts from compatible VIGI cameras to reduce false alarms from environmental triggers 1 × HDD Bay — Supports one 3.5" SATA hard drive up to 10 TB (not included) for local, subscription-free continuous recording ONVIF Compatible — Works with third-party ONVIF-compliant IP cameras in addition to the full VIGI camera range Compact Desktop Design — Small, quiet form factor suits discreet installation in a cabinet, shelf, or back office Use Cases Home Security — Record up to four outdoor or indoor cameras with local storage and free remote smartphone access Small Retail & Hospitality — Monitor entry points, tills, and stock areas with continuous recording and smart detection alerts Small Offices & Clinics — Self-contained IP camera system with no ongoing cloud subscription fees for local recording Rental Properties & Strata — Cost-effective four-camera surveillance for common areas, car parks, and building entries Upgrading from Analogue CCTV — Ideal first IP camera NVR for anyone moving from a DVR-based analogue system to modern IP cameras Technical Specifications Specification Detail Model VIGI NVR1004H Recording Channels 4 Max Recording Resolution Up to 8MP (4K) Video Compression H.265+ / H.265 / H.264+ / H.264 Incoming Bandwidth 40 Mbps Outgoing Bandwidth 40 Mbps Network Port 1 × 10/100/1000 Mbps RJ45 (uplink) PoE Ports None (use a separate PoE switch to power cameras) Video Output 1 × HDMI (up to 4K UHD); 1 × VGA HDD Bay 1 × 3.5" SATA (up to 10 TB, not included) USB Ports 2 × USB 2.0 (mouse / backup) Audio 1 × RCA audio input; 1 × RCA audio output Recording Modes Continuous, schedule, motion detection, smart detection Smart Detection Person detection, vehicle detection (requires compatible VIGI cameras) Remote Access VIGI App (iOS & Android); VIGI Security Manager (Windows) Third-Party Camera Support ONVIF-compatible IP cameras Power Input DC 12 V / 2 A (power adaptor included) Max Power Consumption 10 W (without HDD) Operating Temperature -10°C to 55°C Storage Temperature -20°C to 60°C Dimensions (W × D × H) 200 × 200 × 45 mm Weight 0.72 kg (without HDD) Certifications CE, FCC, RoHS Warranty 3 Years Recommended Accessories & Compatible Cameras VIGI C340S — 4MP outdoor full-colour PoE turret camera; plug-and-play auto-detection with the NVR1004H VIGI C340 — 4MP outdoor PoE turret camera with IR night vision; ideal for perimeter and entry-point coverage VIGI C240 — 4MP indoor PoE dome camera for reception areas, offices, and retail interiors TP-Link VIGI PoE Switch — Required to power PoE cameras when using the NVR1004H (non-PoE model) 3.5" Surveillance Hard Drive (Seagate SkyHawk or WD Purple, up to 10 TB) — purpose-built for 24/7 NVR recording workloads; not included VIGI Junction Box (AB-JB) — surface-mount junction box for clean cable entry on outdoor camera installations CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads VIGI NVR1004H Data Sheet (PDF) VIGI NVR1004H Quick Installation Guide (PDF) CE Declaration of Conformity Frequently Asked Questions Does the NVR1004H have built-in PoE ports? No. The NVR1004H does not include PoE ports. To power PoE cameras, you will need a separate PoE switch connected between the NVR and your cameras. If you prefer an all-in-one solution with built-in PoE, consider the VIGI NVR1004H-4P, which includes four 802.3af/at PoE ports. Does the NVR come with a hard drive? No — a hard drive is not included. The NVR1004H supports one 3.5" SATA drive up to 10 TB. We recommend a surveillance-grade drive such as the Seagate SkyHawk or WD Purple series, designed for the continuous read/write demands of 24/7 NVR recording. Does it only work with VIGI cameras? The NVR1004H is optimised for VIGI cameras and offers plug-and-play auto-detection with the full VIGI range. It also supports third-party ONVIF-compatible IP cameras, though advanced features such as smart detection alerts may not be available with non-VIGI cameras. Can I access recordings remotely on my phone? Yes. The free VIGI app (iOS and Android) provides live view, playback, and smart detection push notifications from anywhere with an internet connection. No subscription fee is required for remote access. How much recording time does 1 TB of storage provide? Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can I expand beyond four cameras? No — the NVR1004H supports a maximum of four channels. For larger deployments, consider the VIGI NVR1008H (8-channel) or NVR2016H (16-channel). Does it support motion-triggered recording? Yes. The NVR1004H supports continuous, schedule-based, motion-triggered, and smart detection-triggered recording. When paired with compatible VIGI cameras, it can trigger recording based on person or vehicle detection events.

Read more less

WizSense + AcuPick · 5-Series · 64-Channel · 8-HDD RAID · 2U64CH AcuPick NVR The Dahua DHI-NVR5864-AI/ANZ is a 64-channel 5-Series WizSense AI NVR with AcuPick, eight SATA bays, RAID 0/1/5/6/10 support, dual Gigabit NICs, dual HDMI + dual VGA outputs, and a 2U rack chassis built for long-retention enterprise installs. Record up to 32 MP per channel, run AcuPick across up to 32 channels, drive a 64-channel split on the main monitor, and scale storage to roughly 128 TB on-board with hardware RAID protection. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's a headend NVR with no built-in PoE — cameras connect through an external PoE switch or your existing managed network. Internal 100–240 VAC universal PSU and a local 3-year warranty backed by CCTV Guru in Sydney. Designed for casinos, transport hubs, hospitals, government and any site that needs RAID-protected storage with 90+ days of retention on 64 cameras. AcuPick, N+M cluster, iSCSI and ONVIF 23.12 are enabled by Dahua's V5 firmware (current factory ship as of 2025). 8 HDD bays · RAID 0/1/5/6/10 · ~128 TB on-board Storage 8 SATA · ~128 TB on-board Hardware RAID RAID 0 · 1 · 5 · 6 · 10 Eight surveillance-grade bays Drop in up to eight WD Purple, Seagate SkyHawk or equivalent surveillance HDDs (each up to 16 TB) — months of 64-channel recording without touching network storage. Hot-swap behind the front door for quick maintenance. RAID 5 / RAID 6 for redundancy Survive single-drive (RAID 5) or dual-drive (RAID 6) failures with zero footage loss. Rebuilds run in the background while recording continues — ideal for casinos, government and compliance-driven installs. RAID 10 for performance + safety Mirror-of-stripes configuration combines RAID 0's throughput with RAID 1's redundancy — useful when the NVR is also a fast playback workstation for the control room. eSATA + iSCSI expansion External SATA archive port plus iSCSI network-storage support — scale beyond 128 TB without rebuilding the recorder. Run hot-tier on the eight on-board RAID bays, archive-tier on iSCSI / eSATA. AcuPick on up to 32 channels — enterprise-scale search AcuPick Channels Up to 32 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans the active 32 channels for matches across hours, days or weeks — clothing colour, body shape, vehicle make / model / colour / direction included. Front- + back-end intelligence Camera-side AI extracts target attributes during recording; NVR-side AI runs the comparison. Higher accuracy than recorder-only search and orders of magnitude faster than human review. Investigations finish in minutes Find a suspect across the AcuPick-active channels and weeks of RAID-protected footage in a single search. Particularly valuable for police investigations, insurance disputes, and post-incident review. ANPR + SMD Plus on all 64 While AcuPick covers up to 32 channels, ANPR by camera, SMD Plus by camera and perimeter protection by camera all scale across every connected camera up to 64 — site-wide intelligence with no channel left behind. 5-Series WizSense AI — depth at scale Industrial AI Chip Same chip as flagship 5-Series siblings Face Database 20 databases · 20,000 images Face Recognition (16-ch image stream) 16 channels of camera-side face detection feeding NVR-side recognition at 16 face snapshots/sec — ideal for entry / exit and high-footfall installs. Twenty face databases, 20,000 images, full attribute filtering. Perimeter Protection (4 ch by NVR) 4 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each), plus all-channel perimeter via camera-side processing — every camera benefits from human/vehicle classification. SMD Plus (8 ch by NVR) 8 NVR-side SMD Plus channels plus all-channel camera-side SMD — deep-learning second-pass classification on every camera, cutting false alarms across the entire site. ANPR by camera (all channels) Pair with Dahua ANPR cameras for full 64-channel licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Carpark, fleet yard, gate management, even multi-site ANPR. Video Metadata search 8 channels of camera-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for sites where downtime isn't an option. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 64-channel recording · dual HDMI · 384 Mbps bandwidth Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 5 MP and 4 MP IP cameras from any ONVIF brand. All 64 channels share the 384 Mbps recording bandwidth. 2× HDMI + 2× VGA outputs Two independent HDMI heads (each up to 4K) with two mirrored VGAs — drive a multi-monitor control room with independent layouts on each screen. Heterogeneous video routing on HDMI1/HDMI2. 64-channel split on main screen Main monitor supports 1 / 4 / 8 / 9 / 16 / 25 / 36 / 64-split layouts (sub monitor up to 16). Watch the entire site at a glance — every camera on one screen. 32-channel 1080p decoding Decode 32 1080p tiles simultaneously for the live wall, or mix and match — 8 × 8 MP, 4 × 16 MP, 2 × 32 MP, or 24 × 1080p with AI on. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels while preserving detail on moving targets — roughly half the storage and bandwidth of standard H.264. Critical at 64-channel scale. Long-retention recording Eight 16 TB drives provide 128 TB of raw capacity. RAID redundancy reduces usable capacity. Use our storage calculator to size storage for your connected cameras, bitrate and retention target. Enterprise I/O — dual NIC, 16 alarm-in, 8 alarm-out (12 V) Dual Gigabit NICs Two independent RJ-45 Gigabit ports with multi-address, load-balance and fault-tolerance bonding modes — segregate camera VLAN from management VLAN, or run an active-passive failover link. 16 alarm-in / 8 alarm-out Physical terminal block for 16 alarm inputs and 8 alarm outputs (vs 6 on the 5464) — one of the outputs is a 12 V 1 A direct power feed for sirens, strobes or gate solenoids. RS-232 + 2 × RS-485 One RS-232 plus two RS-485 lines (half-duplex + full-duplex) — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. 4 × USB (2 × 2.0 + 2 × 3.0) Two front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. ONVIF 23.12 (T / S / G) Latest ONVIF profile support on V5 firmware — drops into any current VMS, plus native integration for Panasonic, Sony, Axis, Pelco, Arecont, Canon and Samsung as well as Dahua. DMSS + DSS Pro VMS Free DMSS mobile app for live view, playback and push notifications. For multi-site enterprise deployments, integrate with Dahua DSS Pro for centralised control of multiple 5864 NVRs across sites. NVR5864 vs the family — how it compares The 5864 (this model) is the storage flagship of the 5-Series AI/ANZ NVR range — double the HDD count of the 5464, hardware RAID 0/1/5/6/10, and a 2U chassis with extra alarm outputs and serial ports. Choose this when retention, redundancy or compliance-grade storage matters more than the smaller 1.5U footprint. For 64 channels in a smaller 1.5U chassis with 4 HDDs, step down to the 5464. 5-Series 64-Channel Comparison Specification NVR5864-AI/ANZ (this model) NVR5464-AI/ANZ IP channels (licence) 64 64 AcuPick channels Up to 32 Up to 32 Main-screen split Up to 64 Up to 64 Max camera resolution 32 MP 32 MP Bandwidth (AI off / on) 384 / 200 Mbps 384 / 200 Mbps HDD bays 8 SATA · ~128 TB 4 SATA · ~64 TB Hardware RAID RAID 0 / 1 / 5 / 6 / 10 Disk groups only Form factor 2U · 6.4 kg 1.5U · 4.74 kg Alarm outputs 8 (incl. 12 V) 6 (incl. 12 V) RS-485 ports 2 (half + full duplex) 1 (half-duplex) USB ports 4 (2 × 2.0 + 2 × 3.0) 3 (1 × 2.0 + 2 × 3.0) Built-in PoE None (external switch) None (external switch) eSATA · iSCSI Yes / Yes Yes / Yes Network ports 2 × Gigabit (bondable) 2 × Gigabit (bondable) Video outputs 2 × HDMI + 2 × VGA 2 × HDMI + 2 × VGA ONVIF (V5 firmware) 23.12 (T / S / G) 23.12 (T / S / G) N+M cluster · Warranty Yes / 3 years Yes / 3 years Full Specifications Model DHI-NVR5864-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor 2U · 8-HDD · rack or desktop · NO built-in PoE IP channels 64 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 20 fps · 2 × 24 MP @ 20 fps · 4 × 16 MP @ 30 fps · 5 × 12 MP @ 30 fps · 8 × 8 MP @ 30 fps · 12 × 5 MP @ 30 fps · 16 × 4 MP @ 30 fps · 32 × 1080p @ 30 fps Decoding (AI on) 1 × 32 MP @ 20 fps · 1 × 24 MP @ 20 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 8 × 5 MP @ 30 fps · 12 × 4 MP @ 30 fps · 24 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 32 channels · 1 combined event per channel/sec (V5 firmware) Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 16 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · 16 channels by camera · 10 IVS rules per channel SMD Plus 8 channels by NVR · 16 channels by camera Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) 8 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 8 × SATA · up to 16 TB per drive (~128 TB max) RAID modes RAID 0 · RAID 1 · RAID 5 · RAID 6 · RAID 10 Video output 2 × HDMI (4K · 3840×2160) + 2 × VGA (1080p) · heterogeneous HDMI1/HDMI2 · simultaneous VGA1+HDMI1 / VGA2+HDMI2 Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 / 64 · Sub screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 8 × alarm out (1 × 12 V 1 A power output) USB 4 ports: 2 × front USB 2.0 + 2 × rear USB 3.0 Network ports 2 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) · multi-address / load-balance / fault-tolerance bonding PoE None (use external PoE switch) RS-232 / RS-485 1 RS-232 · 2 RS-485 (1 half-duplex + 1 full-duplex) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · RTSP · UDP · SNMP · NTP · DHCP · DNS · SMTP · UPnP · IP Filter · PPPoE · FTP · DDNS · Alarm Server · Multicast · P2P · Auto Registration ONVIF 23.12 on V5 firmware (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Samsung · Hanwha Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 50 – 60 Hz (internal universal-voltage PSU) Power consumption ≤ 13 W NVR-side (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 439.9 × 457.9 × 89 mm (2U) Net weight 6.4 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5864-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua NVR HDD Installation Guide Frequently asked questions What's the real benefit of RAID over disk groups? Disk groups (on the 5464) protect against single-drive failures by warning you and isolating the bad drive — but you lose the recordings on that drive. RAID 5 and RAID 6 mathematically distribute parity across all drives, so a single (RAID 5) or even dual (RAID 6) drive failure causes zero footage loss. Compliance-driven sites (banks, casinos, healthcare, government) often require RAID for this reason. Should I run RAID 5, RAID 6 or RAID 10? RAID 5 (single-disk redundancy) gives 7 × 16 TB ≈ 112 TB usable across 8 × 16 TB drives — the typical default for surveillance. RAID 6 (dual-disk redundancy) gives ~96 TB usable but survives two simultaneous failures — recommended for critical sites. RAID 10 (mirror-of-stripes) gives ~64 TB usable but extremely fast playback — useful when the NVR drives the control-room wall directly. Does this NVR really support AcuPick? Yes. Dahua's V5 firmware (binary DH_NVR5XXX-EI_MultiLang_V5.001.0000000.0.R.251220 or later) enables AcuPick on the AI/ANZ unit alongside N+M cluster, iSCSI and ONVIF 23.12. The firmware is published on Dahua AU's official product page for this model and ships from CCTV Guru with V5 installed. Older 2023-vintage datasheets predate this firmware, which is why some online documentation doesn't mention AcuPick. Why is AcuPick capped at 32 channels when the NVR supports 64? AcuPick is heavy on AI-chip resources — running attribute extraction and image-search against 64 channels simultaneously isn't possible on the current 5-Series silicon. You choose which 32 of the 64 channels run AcuPick (the rest still record, and still get ANPR / SMD Plus / perimeter via camera-side AI). Why doesn't it have built-in PoE? The 5864 is a headend NVR for sites with managed PoE switches. Sixty-four cameras through fixed PoE ports would need a 3–4U chassis with much higher power draw. Most 64-camera installs already have a switching layer, and dedicated PoE switches give you better cable layout, VLANs and redundancy than fixed-port PoE. How much storage do I need for 64 cameras at 90 days retention?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can it be rack-mounted? Yes — 2U / 440 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). At 6.4 kg empty (without HDDs), plan for ~13–15 kg fully loaded with eight drives. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

Hikvision ColorVu 3.0 · 4 × Live-Guard Turrets · 6MP or 8MP · 8CH PoE NVR 4 × ColorVu Live-Guard Kit Hikvision 4-Camera ColorVu 3.0 Live-Guard Active Deterrence CCTV Kit with 8-Channel PoE NVR — 6MP or 8MP The Hikvision 4-Camera ColorVu 3.0 Live-Guard Kit is a ready-to-install active-deterrence bundle for Australian homes, shops, offices and small commercial sites. It pairs four ColorVu 3.0 Smart Hybrid Light Live-Guard turrets — your choice of 6MP (DS-2CD2367G3-LIS2UY/SL) or 8MP 4K (DS-2CD2387G3-LIS2UY/SL) — with a DS-7608NI-M2/8P-M 8-channel PoE NVR. On AcuSense human/vehicle detection every camera can fire a white-light strobe, 110 dB siren and live two-way audio — stopping intruders instead of just recording them — while delivering true 24/7 colour to 0.0005 lux. All 8 PoE ports power each camera over a single Cat6 run, with room to grow to eight cameras. Cameras 4 × ColorVu · 6MP or 8MP Recorder 8CH 8K NVR · 8 PoE Active Deterrence Strobe + 110dB Siren Colour Night 24/7 ColorVu · 0.0005 lux Audio 2-Way · Mic + Speaker Storage 2 × SATA · Add HDD ColorVu 3.0 — True 24/7 Colour A 1/1.8" sensor and F1.0 super-aperture deliver full-colour images down to 0.0005 lux. Smart Hybrid Light adds white light or IR (up to 30 m) so you capture clothing and number-plate colour all night, not grey IR. Live-Guard Active Deterrence On AcuSense human/vehicle detection each camera flashes a white strobe, sounds a 110 dB warning and lets you talk down live via Hik-Connect — turning intruders away before they reach the door. 8-Port PoE — Plug & Play One Cat6 cable per camera carries power and video to the NVR's 8 built-in PoE ports — no separate power supplies, no extra switch, commissioning in minutes. 6MP or 8MP — Your Choice Pick 6MP (3200 × 1800) for excellent detail and lower storage use, or 8MP 4K (3840 × 2160) for maximum clarity on faces, plates and large coverage areas. Same Live-Guard deterrence either way. What's Included 4 × Cameras 4 × ColorVu Live-Guard turret (6MP or 8MP — choose your variant): DS-2CD2367G3-LIS2UY/SL (6MP) or DS-2CD2387G3-LIS2UY/SL (8MP). ColorVu 3.0 Smart Hybrid Light turret, 2.8 mm lens, white strobe + 110 dB speaker + two-way audio, F1.0 24/7 colour, AcuSense, IP67. Each ships with mounting bracket, drill template, screws & quick start guide. 1 × Recorder DS-7608NI-M2/8P-M — 8-channel M-Series NVR with 8 built-in PoE ports, dual SATA bays, up to 32 MP per channel, 8K HDMI output and Hik-Connect remote access. Storage No hard drive is included. Add a surveillance-grade HDD (WD Purple / Seagate SkyHawk) to suit your retention — 4TB suits most 4-camera installs, 6TB+ for the 8MP kit or continuous recording. The NVR has two SATA bays for up to 32 TB total. Power 8 × PoE ports built into the NVR — one Cat6 network cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Mounting Brackets and templates included for eave/soffit installs. For brick or flush-wall mounting, add a Hikvision wall-mount bracket per camera; a junction box is also available for tidy cable management. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Genuine Hikvision Australian stock. Best For Family homes Front doors, driveways, side gates and back yards with active deterrence on every approach. Shops & cafés Entries, counters, storerooms and rear lanes — strobe & siren after hours, talk-down by day. Offices & clinics Reception, car parks and rear doors with full-colour detail and HTTPS remote access. Warehouses & yards Docks, gates and perimeters with full-colour plate capture and audible warnings. Rental & holiday homes Perimeter cover with live talk-down and event alerts straight to your phone. Tradies & depots Deter after-hours theft of tools and stock with visible strobe and audible warnings. Camera Specifications — DS-2CD2387G3-LIS2UY/SL (8MP) & DS-2CD2367G3-LIS2UY/SL (6MP) Camera Type ColorVu 3.0 Smart Hybrid Light AcuSense Live-Guard Fixed Turret Image Sensor 1/1.8" Progressive Scan CMOS · ColorVu 3.0 Max. Resolution 8MP = 3840 × 2160 (4K) · 6MP = 3200 × 1800 — depending on chosen variant Min. Illumination Colour 0.0005 lux @ F1.0 · 0 lux with white light Lens Fixed 2.8 mm · F1.0 · wide horizontal FOV Supplement Light Smart Hybrid Light (white + IR) · up to 30 m · 3 modes WDR 130 dB scene-adaptive AI Functions AcuSense · human & vehicle classification · perimeter protection Active Deterrence White-light strobe · built-in 110 dB speaker · two-way audio Audio Built-in arrayed dual microphone + speaker Compression H.265+ / H.265 / H.264+ / H.264 Power 12 VDC / PoE (IEEE 802.3at) Ingress Protection IP67 weatherproof Warranty (Australia) 3 years · CCTV Guru Australia Recorder Specifications — DS-7608NI-M2/8P Channels 8 IP channels · up to 32 MP input Incoming Bandwidth 80 Mbps PoE 8 × PoE ports (IEEE 802.3 af/at) Storage 2 × SATA (up to 16 TB per bay, 32 TB total) · HDD not included Video Output 1 × HDMI (up to 8K) + 1 × VGA · simultaneous AI Functions AcuSense human/vehicle · perimeter · facial (with compatible cameras) Compression H.265+ / H.265 / H.264+ / H.264 Remote / App Hik-Connect (iOS & Android) · P2P · ONVIF Installation Notes ›Cabling: run solid-copper Cat6 from each camera back to the NVR's PoE ports for stable power and video over long distances. ›Weatherproofing: even at IP67, seal outdoor RJ-45 joins with weatherproof tape or a junction box to keep out moisture and salt air. ›Deterrence zones: set AcuSense detection zones on the highest-risk approaches so the strobe and siren trigger on real human/vehicle events only. Setup & Demo Videos — Hikvision Smart Hybrid Light + ColorVu — 24/7 colour imaging AcuSense — human & vehicle detection Official NVR & Camera Setup Videos Use these official Hikvision tutorials to complete the recorder startup wizard and connect the supplied PoE cameras. Menu names may vary slightly with firmware version. NVR 5.0 Startup Wizard — Official Hikvision Tutorial Add a PoE Camera to NVR 5.0 — Official Hikvision Tutorial Downloads & Resources 8MP Camera Datasheet (DS-2CD2387G3) 6MP Camera Datasheet (DS-2CD2367G3) DS-7608NI-M2/8P Datasheet Hikvision Camera Quick Start Guide Should I choose the 6MP or 8MP kit?Both use the same ColorVu 3.0 Live-Guard turret with strobe, siren and two-way audio. Choose 6MP (3200 × 1800) for excellent detail and lower storage use; choose 8MP 4K (3840 × 2160) for maximum clarity on faces, plates and larger coverage areas. What is Live-Guard active deterrence?On AcuSense human/vehicle detection each camera flashes a white-light strobe, sounds a 110 dB warning and lets you open live two-way audio via Hik-Connect — actively turning intruders away. Do these really see colour at night?Yes — ColorVu 3.0 with an F1.0 super-aperture delivers full-colour images down to 0.0005 lux, with Smart Hybrid Light adding white light or IR as needed. Is a hard drive included?No — this kit ships without an HDD so you can size storage to your needs. Add a surveillance-grade drive (4TB suits most 4-camera installs, 6TB+ for 8MP or continuous recording); the NVR has two SATA bays for up to 32 TB total. How are the cameras powered, and can I add more?Each camera runs on a single Cat6 cable to one of the NVR's 8 built-in PoE ports — no separate power supplies. The 8-channel NVR lets you add up to four more compatible Hikvision IP cameras later. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

WizSense + AcuPick · 5-Series · 16-Channel · 16-PoE · 4-HDD · 1.5U 16CH AcuPick NVR The Dahua DHI-NVR5416-16P-AI/ANZ is a 16-channel 5-Series WizSense AI NVR with AcuPick, 16 built-in PoE+ ports (ports 1–8 ePoE up to 800 m), and a 1.5U chassis with four SATA bays — the perfect middle-ground between the compact 2-HDD 5216-16P and the storage-heavy 8-HDD 5832-16P. Record up to 32 MP per channel, plug 16 cameras straight into the back of the recorder, and scale storage to roughly 64 TB on-board across four 16 TB drives. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's the all-in-one 16-channel option with double the storage of the 5216-16P — same PoE budget, same chassis depth, but room for two extra HDDs and longer retention. Internal 100–240 VAC universal PSU, AS/NZS-compliant kettle cord, and a local 3-year warranty backed by CCTV Guru in Sydney. AcuPick, N+M cluster, iSCSI and ONVIF 23.12 are enabled by Dahua's V5 firmware (current factory ship as of 2025). 16 PoE+ ports + 4-HDD storage — built for upgrades PoE Ports 16 × · 130 W · 1–8 ePoE 800 m Storage 4 SATA · up to 64 TB on-board 16 cameras plug straight in Each Cat6 run carries power and video back to the NVR — no power adaptors at every camera, no separate PoE switch. Full 16-channel PoE coverage with a 130 W total budget — comfortable for typical Dahua WizSense bullets and turrets at 7–9 W each. ePoE on ports 1–8 (800 m) Extended PoE on the first 8 ports — 100 Mbps up to 300 m, or 10 Mbps up to 800 m on Cat6. Eliminates intermediate switches and fibre runs on long perimeter or carpark cable runs. 4 SATA bays · 64 TB max Twice the storage of the smaller 5216-16P. Four surveillance-grade HDDs (WD Purple, Seagate SkyHawk) up to 16 TB each. Use our storage calculator to estimate retention for your connected cameras and recording settings. Powers PoE+ cameras 25.5 W per port (PoE+ / 802.3at) — handles IR-heavy bullets, mini PTZs, multi-sensor cameras and active-deterrence units that exceed the basic 15 W PoE ceiling. Plan for ~8 W average per camera across the 16 ports. AcuPick on up to 16 channels — full-licence search AcuPick Channels Up to 16 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans all 16 channels for matches across hours, days or weeks — clothing colour, body shape, vehicle make / model / colour / direction included. Front- + back-end intelligence Camera-side AI extracts target attributes during recording; NVR-side AI runs the comparison. Higher accuracy than recorder-only search and orders of magnitude faster than human review. Investigations finish in minutes Find a suspect across 16 channels and weeks of footage in a single search. Particularly valuable for retail loss prevention, school investigations and insurance disputes. Beyond Quick Pick AcuPick is the next generation of Dahua's Quick Pick — more attributes, more accuracy, and supports both people and vehicles natively. Exclusive to the 5-Series WizSense NVR family. 5-Series WizSense AI — full feature set Industrial AI Chip Independent deep-learning processor Face Database 20 databases · 20,000 images Face Recognition (16-ch image stream) 16 channels of camera-side face detection feeding NVR-side recognition at 16 face snapshots/sec — full licence coverage. Twenty face databases, 20,000 images, full attribute filtering (gender, age, mask, glasses). Perimeter Protection (4 ch by NVR) 4 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each), plus 16 channels of camera-side perimeter via WizSense IPCs — human/vehicle classification cuts false alarms from animals, weather and lighting changes. SMD Plus on 8 channels by NVR Smart Motion Detection Plus runs a deep-learning second pass on 8 NVR-side channels, plus 16 camera-side channels — classifies targets as person or vehicle so only real events make it to your phone. ANPR by camera (8 channels) Pair with Dahua ANPR cameras for 8 channels of licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Ideal for site gates, fleet yards and small carparks. Video Metadata search 8 channels of camera-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for sites where downtime isn't an option. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 32 MP recording · dual HDMI · 64 TB on-board storage Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 5 MP and 4 MP IP cameras from any ONVIF brand. 384 Mbps total recording bandwidth. 2× HDMI 4K + 2× VGA outputs Two independent HDMI heads (each up to 4K) with two mirrored VGAs — drive a multi-monitor control room with independent layouts on each screen. Heterogeneous video routing on HDMI1/HDMI2. 16-channel split on main screen Main monitor supports 1 / 4 / 8 / 9 / 16-split layouts (sub monitor up to 16). Plenty of headroom for the 16-channel licence — every camera on one screen. 4 SATA bays · up to 64 TB Four surveillance-grade HDDs up to 16 TB each (WD Purple, Seagate SkyHawk) — months of 16-channel recording without touching network storage. eSATA + iSCSI expansion External SATA archive port plus iSCSI network-storage support — scale beyond 64 TB without rebuilding the recorder. Hot tier on the 4 on-board bays, archive tier on iSCSI / eSATA. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels while preserving detail on moving targets — roughly half the storage and bandwidth of standard H.264. Built for installers, ready for compliance — 16 alarm-in, 12V output 16 alarm-in / 6 alarm-out Physical terminal block for 16 alarm inputs and 6 alarm outputs — one of the outputs is a 12 V 1 A direct power feed for sirens, strobes or gate solenoids. Wire in PIRs, door sensors, glass-break detectors, panic buttons. Gigabit network uplink Single 10/100/1000 Mbps RJ-45 to your managed switch or router for remote viewing, multi-site VMS pulls and NAS backup. Cameras 1–16 power off the built-in PoE; the gigabit uplink handles client traffic. RS-232 + RS-485 One RS-232 plus one RS-485 (half-duplex) — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. 3 × USB (1 × 2.0 + 2 × 3.0) One front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. ONVIF 23.12 (T / S / G) Latest ONVIF profile support on V5 firmware — drops into any current VMS, plus native integration for Panasonic, Sony, Axis, Pelco, Arecont, Canon and Samsung as well as Dahua. DMSS + DSS Pro VMS Free DMSS mobile app for live view, playback and push notifications. For multi-site enterprise deployments, integrate with Dahua DSS Pro for centralised control of multiple 5-Series NVRs. NVR5416-16P vs the family — how it compares The 5416-16P (this model) is the upgraded 16-channel option — same PoE budget and AI features as the 5216-16P but with double the HDD bays and a 1.5U chassis. Choose this when your install needs longer retention or higher-resolution recording but you don't need to jump up to 32 channels. For the most compact build, step down to the 5216-16P; for 32 channels with RAID-protected 8-HDD storage, step up to the 5832-16P. 5-Series 16-PoE Comparison Specification NVR5416-16P-AI/ANZ (this model) NVR5216-16P-AI/ANZ NVR5832-16P-AI/ANZ IP channels (licence) 16 16 32 AcuPick channels Up to 16 Up to 16 Up to 16 Built-in PoE 16 × ports · 130 W · 1-8 ePoE 16 × ports · 130 W · 1-8 ePoE 16 × ports · 150 W · 1-8 ePoE HDD bays · max storage 4 SATA · ~64 TB 2 SATA · ~32 TB 8 SATA · ~128 TB Hardware RAID Disk groups Disk groups RAID 0 / 1 / 5 / 6 / 10 Form factor 1.5U · 4.82 kg 1U · 2.66 kg 2U · 6.9 kg Bandwidth (AI off / on) 384 / 200 Mbps 384 / 200 Mbps 384 / 200 Mbps Max camera resolution 32 MP 32 MP 32 MP Face Recognition (NVR) 2 ch · or 16 ch FD-by-cam + FR-by-NVR 2 ch · or 16 ch FD-by-cam + FR-by-NVR 2 ch · or 16 ch FD-by-cam + FR-by-NVR Face Database 20 DBs · 20,000 images 20 DBs · 20,000 images 20 DBs · 20,000 images Perimeter (NVR) · SMD Plus (NVR) 4 ch · 8 ch 4 ch · 8 ch 4 ch · 8 ch ANPR (by camera) 8 channels 8 channels 8 channels Alarm I/O 16 in / 6 out (incl. 12 V) 4 in / 2 out 16 in / 8 out (incl. 12 V) RS-485 ports 1 (half-duplex) 1 (half-duplex) 2 (half + full duplex) USB ports 1 × 2.0 + 2 × 3.0 1 × 2.0 + 1 × 3.0 2 × 2.0 + 2 × 3.0 Network ports 1 × Gigabit 1 × Gigabit 1 × Gigabit Video outputs 2 × HDMI 4K + 2 × VGA 1 × HDMI 4K + 1 × VGA 2 × HDMI 4K + 2 × VGA eSATA · iSCSI · N+M (V5 firmware) Yes / Yes / Yes No / Yes / Yes Yes / Yes / Yes ONVIF (V5 firmware) 23.12 (T / S / G) 22.06 (T / S / G) 23.12 (T / S / G) Warranty (Australia) 3 years 3 years 3 years Full Specifications Model DHI-NVR5416-16P-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor 1.5U · 4-HDD · rack or desktop · 16 built-in PoE+ ports IP channels 16 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 20 fps · 2 × 24 MP @ 20 fps · 4 × 16 MP @ 30 fps · 5 × 12 MP @ 30 fps · 8 × 8 MP @ 30 fps · 12 × 5 MP @ 30 fps · 16 × 4 MP @ 30 fps Decoding (AI on) 1 × 32 MP @ 20 fps · 1 × 24 MP @ 20 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 8 × 5 MP @ 30 fps · 12 × 4 MP @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 16 channels · 1 combined event per channel/sec (V5 firmware) Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 16 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · 16 channels by camera · 10 IVS rules per channel SMD Plus 8 channels by NVR · 16 channels by camera Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) 8 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 4 × SATA · up to 16 TB per drive (~64 TB max) Video output 2 × HDMI (4K · 3840×2160) + 2 × VGA (1080p) · heterogeneous HDMI1/HDMI2 · simultaneous VGA1+HDMI1 / VGA2+HDMI2 Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 · Sub screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 6 × alarm out (1 × 12 V 1 A power output) USB 3 ports: 1 × front USB 2.0 + 2 × rear USB 3.0 Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 16 × ports · 10/100 Mbps · IEEE 802.3af/at · 130 W total · 25.5 W per port (max) · ports 1-8 support ePoE (800 m / 100 Mbps to 300 m, 10 Mbps to 800 m) RS-232 / RS-485 1 RS-232 · 1 RS-485 (half-duplex) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · RTSP · UDP · SNMP · NTP · DHCP · DNS · SMTP · UPnP · IP Filter · PPPoE · FTP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF 23.12 on V5 firmware (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Samsung Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 50 – 60 Hz (internal universal-voltage PSU) Power consumption ≤ 13 W NVR-side (without HDD) · PoE total 130 W Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 440 × 415.6 × 76 mm (1.5U) Net weight 4.82 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5416-16P-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua Smart Series HDD Installation Guide Frequently asked questions What's the real benefit over the smaller NVR5216-16P? Same 16 channels and same 16 PoE+ ports — but the 5416-16P (this model) doubles the HDD bays from 2 to 4, doubles your on-board storage ceiling (~64 TB vs ~32 TB), upgrades video output from single HDMI/VGA to dual HDMI/VGA, and adds 16 alarm inputs / 6 alarm outputs (vs 4 / 2) plus eSATA. Choose this when you want longer retention or hardware alarm integration on your 16-channel build. What does ePoE on ports 1–8 give me? Extended PoE — long-distance Cat6 runs at reduced speed. Ports 1–8 support 100 Mbps up to 300 m or 10 Mbps up to 800 m (most IP cameras work fine at 10 Mbps for sub-stream + main-stream H.265+). Eliminates intermediate switches on long perimeter or carpark runs. Ports 9–16 run standard PoE+ at up to 100 m. Does this NVR really support AcuPick? Yes. Dahua's V5 firmware (binary DH_NVR5XXX-EI_MultiLang_V5.001.0000000.0.R.251220 or later) enables AcuPick on the AI/ANZ unit alongside N+M cluster, iSCSI and ONVIF 23.12. The firmware is published on Dahua AU's official product page and ships from CCTV Guru with V5 installed. How much storage do I need for 16 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. How does the 16 PoE budget cover 16 cameras? 130 W total ÷ 16 cameras = ~8 W average per camera. That's comfortable for most Dahua WizSense bullets and turrets (5–9 W each). If you're running PTZ, IR-heavy bullets or active-deterrence units (15–25 W each), plan to mix in some lower-draw cameras or use an external PoE injector for the high-power ones. Can it be rack-mounted? Yes — 1.5U / 440 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). At 4.82 kg empty (without HDDs), plan for ~8–10 kg fully loaded with four drives. What's the 12 V alarm output for? One of the 6 alarm outputs is a direct 12 V 1 A power feed — drive a siren, strobe light or electric strike directly without needing an external relay or power supply. The other 5 outputs are dry-contact relays you can wire to anything that takes a NO/NC trigger. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link VIGI NVR1104H-4P 4-Channel PoE+ Network Video Recorder The TP-Link VIGI NVR1104H-4P is a compact, easy-to-deploy 4-channel PoE+ network video recorder designed for small businesses and residential installations across Australia. With 4K HDMI output, plug-and-play VIGI camera support, and up to 10TB of local storage, it delivers professional-grade surveillance without the complexity. Key Features 4K HDMI Output & 16MP Decoding — Displays sharp footage up to 8MP resolution across a 4-channel layout, ensuring no detail is missed. 4 × PoE+ Ports (53W Budget) — Powers and connects up to four IP cameras over a single Ethernet cable per camera — no separate power adapters required. Plug & Play Camera Setup — New VIGI IP cameras are detected and activated automatically, making installation fast and straightforward. 4-Channel Simultaneous Playback — Review footage from all four cameras at once, with variable playback speed and event-based timeline navigation. 24/7 Continuous Recording — Supports up to 10TB HDD storage for uninterrupted, long-term footage retention. H.265+ Compression — Reduces storage and bandwidth consumption without sacrificing image quality. ONVIF Compatible — Integrates with VIGI and third-party ONVIF-compliant IP cameras for flexible system design. Two-Way Audio — Built-in speaker and voice intercom support enable real-time communication through compatible cameras. Remote Monitoring — Manage live feeds, playback, and alerts via the VIGI app, web UI, or VIGI Security Manager from anywhere. Flexible Mounting — Install wall-mounted, flat on a desk, or under a desk to suit your site layout. Use Cases Small retail stores, cafés, and restaurants needing a simple, reliable recorder Warehouses and storage facilities requiring 24/7 continuous recording Small offices and financial institutions with up to four camera positions Residential properties upgrading from analogue DVR to IP-based surveillance Installers building cost-effective VIGI end-to-end systems for clients Technical Specifications Specification Detail Model VIGI NVR1104H-4P Video Channels 4 Max Recording Resolution Up to 8MP Decoding Capacity 16MP (e.g. 4 × 4MP) Video Output 1 × HDMI (4K), 1 × VGA PoE Ports 4 × 10/100Mbps PoE+ (IEEE 802.3at) PoE Budget 53W total / 30W per port Network Port 1 × RJ45 10/100Mbps (uplink) HDD Bays 1 × SATA (up to 10TB, HDD not included) Video Compression H.265+ / H.265 / H.264+ / H.264 Simultaneous Playback 4 channels Audio Built-in speaker; two-way audio via compatible cameras USB Ports 2 × USB 2.0 ONVIF Profile S Remote Access VIGI App, Web UI, VIGI Security Manager Operating Temperature 0°C to 40°C Power Input 100–240V AC, 50/60Hz Dimensions 200 × 200 × 45 mm Weight Approx. 1.38 kg Warranty 2 Years Recommended Accessories TP-Link VIGI C540 4MP Pan Tilt Camera — Full-colour outdoor PTZ camera, plug-and-play compatible with this NVR. TP-Link VIGI C300 Series Cameras — Cost-effective indoor/outdoor fixed cameras for completing a 4-channel system. 3.5" SATA Hard Drive (up to 10TB) — Required for local recording; choose a surveillance-rated HDD (e.g. Seagate SkyHawk or WD Purple). Cat6 Ethernet Cable — For reliable PoE data and power delivery to each connected camera. HDMI Monitor or TV — For local live view and playback via the 4K HDMI output. Downloads VIGI NVR1104H-4P Datasheet (PDF) Frequently Asked Questions Does the NVR1104H-4P come with a hard drive? No. The NVR supports one 3.5" SATA HDD up to 10TB, which must be purchased separately. A surveillance-rated drive such as the Seagate SkyHawk or WD Purple is recommended for 24/7 operation. Can I use non-TP-Link cameras with this NVR? Yes. The NVR1104H-4P supports ONVIF Profile S, allowing basic integration with compatible third-party IP cameras. For full smart detection, plug-and-play setup, and two-way audio, TP-Link VIGI cameras are recommended. How many cameras can I connect? Up to four IP cameras can be connected — one per PoE+ port. All four can record simultaneously and be viewed in a split-screen layout. Can I access footage remotely? Yes. Remote access is available via the free VIGI mobile app (iOS and Android), a web browser UI, or the VIGI Security Manager desktop software. What is the maximum PoE power per port? Each PoE+ port supports up to 30W, with a total system budget of 53W across all four ports. This is sufficient for most VIGI cameras including pan tilt models. Is this NVR suitable for outdoor installation? The NVR itself is designed for indoor use. It should be installed in a sheltered, ventilated location. The connected cameras handle outdoor exposure.

Read more less

UniFi Protect — Enterprise Rack NVR UniFi Protect UNVR — 4-Bay Rack NVR for Up to 15 × 4K Cameras The UniFi Protect UNVR is the professional rack-mount NVR for demanding UniFi Protect deployments — supporting up to 15 × 4K cameras or 50 × Full HD cameras with local storage across four 3.5″ HDD bays. With automatic HDD RAID for data redundancy, a 10G SFP+ uplink, and optional power backup compatibility, the UNVR is built for commercial, enterprise, and high-security installations across Australia. Max Cameras 15 × 4K HDD Bays 4 × 3.5″ Uplink 10G SFP+ Redundancy Auto RAID Why Choose the UniFi Protect UNVR? 4 × 3.5″ HDD Bays — Flexible Recording Storage Install up to four 3.5″ SATA HDDs for high-capacity local recording — use our storage calculator to estimate retention for your cameras and RAID configuration. Automatic HDD RAID Configuration Built-in automatic RAID configuration provides data redundancy — protecting your recordings against single drive failure without manual RAID setup. 10G SFP+ Uplink A high-speed 10G SFP+ port handles the bandwidth demands of multiple 4K camera streams simultaneously — essential for large-scale deployments. Gigabit RJ45 Uplink An additional 1G RJ45 port provides flexible network connectivity for standard Gigabit infrastructure. Power Backup Compatible Connects to the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your surveillance system running during power events. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras out of the box — no separate software licence, no subscription, no cloud dependency. Rack-Mount Form Factor 1U rack-mountable design integrates cleanly into server rooms, comms cabinets, and AV racks for professional installations. Scales to 15 × 4K or 50 × HD Cameras The UNVR handles the largest UniFi Protect camera deployments — from mid-size commercial sites to enterprise and multi-building installations. Ideal Use Cases 🏭 Commercial & Enterprise Sites Warehouses, manufacturing facilities, and large commercial properties needing high-capacity 4K recording with RAID redundancy. 🏫 Schools & Campuses Multi-building school and university campuses where centralised recording, long retention, and reliable storage are critical. 🏢 Office Buildings & Strata Multi-tenancy office buildings, strata complexes, and commercial towers with large camera counts and server room infrastructure. 📹 Large UniFi Protect Deployments The UNVR is the recommended NVR for any UniFi Protect deployment exceeding 6 cameras — step up from the UNVR Instant when you need more capacity and redundancy. Technical Specifications Model UNVR HDD Bays 4 × 2.5″/3.5″ SATA (drives not included) Max Cameras 15 × 4K / 50 × Full HD Max Storage Retention Depends on installed drives, RAID configuration and recording settings; use our storage calculator. Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 RAID Automatic HDD RAID configuration Power Backup Compatible with USP-RPS (sold separately) Management UniFi Protect (pre-installed, no subscription) Form Factor 1U Rack-mount What’s in the Box 📦 UNVR Unit 4-bay rack NVR with UniFi Protect pre-installed. 🔧 Rack Mount Hardware Rack mounting hardware and power cable included. 📖 Quick-Start Guide Installation guide and documentation included. ⚠️ Not Included HDDs, cameras, and USP-RPS power backup are sold separately. CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Frequently Asked Questions Does the UNVR require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk). Check Ubiquiti’s HDD compatibility list before purchasing. How many cameras can the UNVR support? Up to 15 × 4K cameras or 50 × Full HD cameras, with local recording. Use our storage calculator to estimate retention. What is the difference between the UNVR and UNVR Instant? The UNVR Instant is a compact desktop NVR with 6 built-in PoE ports, suited for up to 6 × 4K cameras. The UNVR is a rack-mount unit with 4 HDD bays, 10G SFP+, and supports up to 15 × 4K cameras — designed for larger commercial deployments. Does it support power redundancy? Yes. The UNVR is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Downloads & Resources Datasheet Installation Guide Relevant Add-ons & Accessories UniFi Protect ViewPort PoE HDMI Adapter Display the UNVR's UniFi Protect camera feeds on an HDMI monitor or television. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

TP-Link VIGI NVR2016H — 16-Channel Network Video Recorder The TP-Link VIGI NVR2016H is a professional 16-channel network video recorder designed for business CCTV deployments where cameras are powered via a separate PoE switch or individual power supplies. With 4K HDMI output, H.265+ compression, 160 Mbps recording bandwidth, and full integration with the TP-Link VIGI ecosystem, it delivers a clean, scalable, and installer-friendly foundation for IP surveillance across retail, commercial, warehouse, and office environments across Australia. Key Features 16-Channel IP Video Recording: Supports up to 16 simultaneous IP camera channels for small to medium business CCTV systems with room to grow. 4K HDMI Output: Connect a monitor for live view and playback at up to 3840×2160 @ 30Hz, with simultaneous VGA output at up to 1080p @ 60Hz. H.265+ Compression: Significantly reduces storage and bandwidth requirements compared to H.264, without compromising recording quality. 160 Mbps Bandwidth: 160 Mbps incoming and outgoing bandwidth supports reliable multi-camera recording and simultaneous 16-channel playback. Dual SATA HDD Bays: Supports two SATA hard drives with up to 16TB capacity each (HDDs sold separately) for extended local storage up to 32TB total. Synchronous 16-Channel Playback: Review footage from all 16 cameras simultaneously, with timeline-based event search and variable playback speed. ONVIF Profile S Compatible: Works with TP-Link VIGI cameras and third-party ONVIF-compliant IP cameras for flexible system design. Remote Viewing: Access live and recorded footage remotely via the VIGI app on Android and iOS, or via VIGI Security Manager on desktop. Smart Detection Support: Compatible with VIGI cameras featuring human and vehicle classification, line crossing, and intrusion detection for intelligent alert management. Alarm I/O: 4 alarm inputs and 2 alarm outputs for integration with external sensors, sirens, and access control devices. Audio I/O: 1-channel RCA audio input and output for audio recording and monitoring. Flexible Management: Manage via web browser UI, VIGI Security Manager software, or the VIGI mobile app. Use Cases Retail & Hospitality: Monitor entrances, counters, aisles, stock rooms, and customer-facing areas with reliable 16-camera recording from a single unit. Warehouses & Logistics: Cover loading docks, storage areas, car parks, and perimeter zones — pair with a PoE switch for clean single-cable camera runs. Offices & Commercial Buildings: Centralise surveillance across reception, corridors, server rooms, and car parks with remote access for management teams. Clinics & Education Facilities: Scalable 16-channel capacity suits medium-sized facilities requiring comprehensive internal and perimeter coverage. Installer Projects (Existing Infrastructure): Ideal where cameras are already powered via a dedicated PoE switch or 12V DC supplies — the NVR2016H slots in as the recording and management hub. Specifications Model VIGI NVR2016H IP Video Channels 16 PoE Ports None (non-PoE model) Incoming / Outgoing Bandwidth 160 Mbps / 160 Mbps HDMI Output 3840 × 2160 @ 30Hz (4K) VGA Output 1920 × 1080 @ 60Hz Video Compression H.265+ / H.265 / H.264+ / H.264 Max Recording Resolution Up to 8MP (4K) Synchronous Playback 16 channels HDD Bays 2 × SATA (up to 16TB each, not included) Max Total Storage Up to 32TB Network Interface 2 × RJ45 10/100/1000 Mbps USB 1 × USB 2.0 (front), 1 × USB 3.0 (rear) Audio I/O 1-ch RCA input, 1-ch RCA output Alarm I/O 4 inputs / 2 outputs Interoperability ONVIF Profile S, CGI Mobile Access Android, iOS (VIGI App) Operating Temperature -10°C to 55°C Dimensions 330 × 285 × 45 mm In the Box NVR, power adapter, power cable, HDD power & data cables, mounting accessories, mouse, quick installation guide Official Videos How to Set Up People Counting Using VIGI VMS — Official TP-Link tutorial for configuring people counting analytics on the VIGI platform. How to Upgrade VIGI NVR Firmware — Official TP-Link walkthrough for keeping your VIGI NVR firmware up to date. Frequently Asked Questions Does the VIGI NVR2016H have built-in PoE ports? No. The NVR2016H is a non-PoE model and does not include built-in PoE ports. Cameras must be powered separately via a PoE switch, PoE injector, or 12V DC power supply. If you need built-in PoE, consider the VIGI NVR2016H-16P, which includes 16 built-in PoE+ ports. Is a hard drive included? No. The NVR2016H does not include a hard drive. It supports two SATA HDDs with up to 16TB each (32TB total). Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for reliable 24/7 recording. Can I view cameras remotely? Yes. Remote live view and playback are supported via the free VIGI app on Android and iOS, and via VIGI Security Manager on desktop, provided the NVR has an active internet connection. Does it work with non-VIGI cameras? Yes. The NVR2016H supports ONVIF Profile S, allowing compatible third-party IP cameras to be added. For full smart detection and AI analytics features, TP-Link VIGI cameras are recommended. What is the difference between the NVR2016H and the NVR2016H-16P? The key difference is power delivery. The NVR2016H-16P includes 16 built-in PoE+ ports (90W total budget) to power cameras directly. The NVR2016H has no built-in PoE — cameras must be powered separately. The NVR2016H also features 2 Gigabit network interfaces versus 1 on the 16P model, and has a lower alarm I/O count (4 in / 2 out vs 6 in / 4 out). How much storage can the NVR2016H support? It supports two SATA hard drives simultaneously, each up to 16TB, for a total of up to 32TB of local storage. Is this NVR suitable for commercial CCTV installations in Australia? Yes. The NVR2016H is well suited to retail, office, warehouse, hospitality, and commercial CCTV projects requiring up to 16 camera channels, particularly where cameras are already powered via a dedicated PoE switch or existing infrastructure. Downloads 📄 VIGI NVR2016H Resources — Datasheet, Firmware & User Guide (TP-Link AU)

Read more less

Professional 8-Channel PoE+ NVR for Continuous 24/7 Surveillance The TP-Link VIGI NVR1008H-8P is a purpose-built network video recorder designed for installers and end users who need reliable, high-resolution surveillance without the complexity. With eight integrated PoE+ ports, 4K HDMI output, and support for up to 16MP decoding, it delivers enterprise-grade performance in a compact, rack- or desktop-mountable chassis — ideal for small businesses, retail sites, warehouses, and residential installations across Australia. Key Features 4K HDMI Output & 16MP Decoding: Display crystal-clear footage up to 8MP resolution across all 8 channels simultaneously on any 4K monitor or TV. 8 Built-In PoE+ Ports: Power and connect PoE cameras with a single RJ45 cable — no separate power adapters or injectors required, reducing installation time and cable clutter. 24/7 Continuous Recording: Supports up to 10TB of local storage (HDD not included) for uninterrupted, long-term footage retention. H.265+ Compression: Reduces storage consumption and network load without compromising image quality — keeping running costs low. 8-Channel Simultaneous Playback: Review footage from all 8 cameras at once, with variable playback speed and timeline-based event search. Plug & Play with VIGI Cameras: Automatically detects and activates new VIGI IP cameras on the network — no manual configuration needed. ONVIF Compatible: Works with VIGI and third-party ONVIF-compliant IP cameras for flexible, mixed-brand deployments. Remote Monitoring: Manage and view live or recorded footage via the VIGI app (iOS & Android), web browser, or VIGI Security Manager desktop software. Two-Way Audio: Supports voice intercom through compatible cameras for real-time communication at monitored locations. Flexible Mounting: Rack-mountable or freestanding — suits server rooms, comms cabinets, or under-desk installations. Common Use Cases Small to medium business security (retail, hospitality, offices) Warehouse and logistics facility monitoring Residential estate and multi-dwelling surveillance School and childcare centre security systems Construction site and remote property monitoring Technical Specifications Model VIGI NVR1008H-8P Video Channels 8 Max Decoding Capacity 16MP Video Output 1× HDMI (4K), 1× VGA PoE Ports 8× PoE+ (IEEE 802.3at) Total PoE Budget 80W HDD Bays 1× SATA (up to 10TB, HDD not included) Compression H.265+ / H.265 / H.264+ / H.264 Simultaneous Playback 8 channels Network Interface 1× RJ45 Gigabit Ethernet USB Ports 2× USB 2.0 ONVIF Yes (Profile S, Profile G, Profile T) Remote Access VIGI App, Web UI, VIGI Security Manager Power Input 100–240V AC, 50/60Hz Operating Temperature 0°C to 40°C Dimensions 315 × 230 × 45mm Weight 1.5kg (without HDD) Warranty (Australia) 3 Years Frequently Asked Questions Does the NVR1008H-8P come with a hard drive? No, the NVR1008H-8P does not include a hard drive. It supports one 3.5" SATA HDD up to 10TB. We recommend a surveillance-rated drive such as the Western Digital Purple or Seagate SkyHawk series for 24/7 operation. Can I use non-TP-Link cameras with this NVR? Yes. The NVR1008H-8P supports ONVIF-compliant IP cameras from other manufacturers. For the best experience and full feature access — including Plug & Play activation and smart detection — use TP-Link VIGI cameras. How do I access footage remotely? Download the free VIGI app on iOS or Android, or log in via a web browser. Remote access is available over your internet connection without requiring a static IP address, using TP-Link's cloud relay service. How many cameras can I connect? Up to 8 IP cameras can be connected — all via the built-in PoE+ ports. Each port delivers up to 30W of power (802.3at), with a total PoE budget of 80W across all ports. Is this NVR suitable for outdoor use? The NVR itself is designed for indoor installation only. For outdoor surveillance, pair it with TP-Link VIGI outdoor-rated IP cameras (IP67 or higher). What is the maximum storage capacity? The NVR supports a single HDD up to 10TB. With H.265+ compression enabled, this provides several weeks to months of continuous recording depending on camera resolution and motion activity.

Read more less

WizSense AI · 8-Channel · 8-PoE · 2-HDD · 4K 8CH WizSense NVR The Dahua DHI-NVR4208-8P-AI/ANZ is an 8-channel WizSense AI NVR with 8 built-in PoE+ ports, 4K HDMI output, dedicated deep-learning processing, and a full-size 1U chassis with two SATA bays, 4 alarm inputs + 2 alarm outputs, and an internal universal-voltage PSU. Record up to 16 MP per channel, integrate hardware sensors via the rear terminal block, and scale storage up to roughly 32 TB. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipping with regional firmware, an internal 100–240 VAC PSU and standard kettle cord, and a local 3-year warranty backed by CCTV Guru in Sydney. The natural step up from the compact 1-HDD NVR4108HS for installs that need redundant storage, longer retention or hardwired alarm integration without jumping to 16 channels. 8 PoE+ ports — full-chassis 2-HDD platform PoE Ports 8 × 10/100 · IEEE 802.3af/at PoE Budget 72 W total · up to 25.5 W per port 2 SATA bays · ~32 TB max Two surveillance-grade HDD bays (WD Purple, Seagate SkyHawk recommended), up to 16 TB per drive — months of retention even on 8 cameras at high resolution. Alarm I/O on the back Physical 4-input / 2-output terminal block — wire in PIRs, door sensors, glass-break detectors, sirens or gate triggers for hardware-level event linkage and relay control. Internal universal PSU 100–240 VAC, 47–63 Hz — standard kettle cord in, no external power brick. Same chassis and PSU as the 16-channel NVR4216, just half the channels. Powers PoE+ cameras 25.5 W per port (PoE+ / 802.3at) handles IR-heavy bullets, mini PTZs and active-deterrence cameras that exceed the basic 15 W PoE ceiling. WizSense AI — deep-learning that knows people from leaves Dedicated AI Chip Independent deep-learning processor Targeted Alerts Human + vehicle classification only Face Recognition 1 channel of face detection + recognition by the NVR (12 face snapshots/sec), or extend to 8 channels using camera-side detection feeding NVR-side recognition. Up to 10 face databases and 20,000 face images. Perimeter Protection 2 channels of tripwire and intrusion analytics, 10 IVS rules per channel, with human/vehicle secondary recognition to suppress false alarms from animals, leaves and changing light. SMD Plus on 4 channels Smart Motion Detection Plus runs a deep-learning second pass on motion events, classifying targets as person or vehicle so only real events make it to your phone. ANPR by camera (4 channels) When paired with Dahua ANPR cameras, the NVR stores up to 20,000 number plates with full blocklist / allowlist control — ideal for site gates, fleet yards or staff carparks. Quick Pick search Paste a person or vehicle still from any recorded clip and Quick Pick scans the timeline for matches — clothing colour, vehicle colour and direction included. Pair with WizSense IPCs to enable. AI Search across cameras Search recorded video by metadata (gender, age group, glasses, mask, beard, vehicle colour, plate, direction) or upload a face image and the NVR finds every appearance across all channels. See WizSense AI in action Dahua WizSense Quick Pick — find a person or vehicle in seconds Dahua Face Recognition — workflow on a WizSense NVR 16 MP recording · 4K display · 32 TB storage 16 MP per channel input Future-proof headroom for high-resolution Dahua bullets, domes and multi-sensors. Also handles 12 MP, 8 MP (4K), 6 MP, 5 MP and 4 MP IP cameras from any ONVIF brand. 4K HDMI + 1080p VGA Simultaneous output on both heads — drive a 4K spot monitor in the lobby and a 1080p control PC in the office. Configurable as the same view or independent layouts. 256 Mbps bandwidth 256 Mbps incoming / record / outgoing with AI off, 180 Mbps when WizSense features are active — comfortable for 8 cameras at 8 MP each. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels and keeps detail on moving targets — roughly half the storage and bandwidth of standard H.264. Gigabit network uplink 10/100/1000 Mbps RJ-45 to your switch or router — remote viewing, NAS backup and multi-site VMS pulls don't bottleneck on a slow link. 9-screen split layouts 1 / 4 / 8 / 9 split-screen layouts on both monitor outputs. Drag-and-drop channel reorder, instant playback, and smart-search-from-thumbnail in the local GUI. Built for installers, simple for end-users 4 alarm-in / 2 alarm-out Physical terminal block on the rear panel — wire in PIRs, door sensors, sirens or gate triggers for hardware-level event linkage and external relay control. ONVIF 21.12 (T / S / G) Drops into any ONVIF VMS and natively accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon — plus Dahua's full IP range. DMSS mobile app Free iOS / Android viewer with live view, playback, push notifications, two-way audio and P2P remote access — no static IP, no port forwarding, no DDNS account needed. Local + web GUI Connect a mouse and HDMI monitor for full local setup, or use any modern browser (Chrome, Firefox, Edge) for full remote configuration. Security Baseline 2.3 Dahua's hardened security baseline — strong-password enforcement, HTTPS, IP filter, account lockout, audit logging and cybersecurity exception alarms out of the box. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. NVR4108HS-8P vs NVR4208-8P — how it compares Both 8-channel siblings share the same WizSense AI feature set, 8 PoE+ ports and 72 W PoE budget. The differences sit in storage, hardware alarm I/O, power supply and chassis size — choose the 4108HS for a compact desktop install, or the 4208 (this model) when you need redundant storage and wired alarm integration. 8-Channel Sibling Comparison Specification NVR4108HS-8P-AI/ANZ NVR4208-8P-AI/ANZ (this model) IP channels 8 · up to 16 MP 8 · up to 16 MP WizSense AI features Identical Identical Face Recognition / Face DB 1-ch + 10 DB / 20,000 images 1-ch + 10 DB / 20,000 images Perimeter Protection 2 channels · 10 IVS rules each 2 channels · 10 IVS rules each SMD Plus 4 channels 4 channels ANPR (by camera) 4 channels · 20,000-plate DB 4 channels · 20,000-plate DB Bandwidth (AI on / off) 180 / 256 Mbps 180 / 256 Mbps PoE ports 8 · 72 W total · 25.5 W per port 8 · 72 W total · 25.5 W per port HDD bays 1 SATA · up to 16 TB 2 SATA · up to 32 TB Alarm I/O None 4 in / 2 out (physical terminals) Power supply External 53 VDC adaptor Internal 100–240 VAC PSU Chassis Compact 1U · 260 × 232.7 × 47.6 mm · 0.92 kg Full 1U · 375 × 329.3 × 53 mm · 2.51 kg Rack-mount ready Desktop primary Rack or desktop 4K HDMI · ONVIF · DMSS Yes / 21.12 / Yes Yes / 21.12 / Yes Warranty (Australia) 3 years 3 years Full Specifications Model DHI-NVR4208-8P-AI/ANZ Series WizSense · NVR4000-AI/ANZ (Australia / NZ market) Form factor Full 1U · 2-HDD · rack or desktop IP channels 8 · up to 16 MP per channel Supported resolutions 16 MP · 12 MP · 8 MP · 6 MP · 5 MP · 4 MP · 3 MP · 1080p · 960p · 720p · D1 · CIF Bandwidth (AI off) 256 Mbps incoming / 256 Mbps record / 256 Mbps outgoing Bandwidth (AI on) 180 Mbps incoming / 180 Mbps record / 180 Mbps outgoing Decoding (AI off) 2 × 16 MP @ 30 fps · 2 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 6 × 5 MP @ 30 fps · 8 × 4 MP @ 30 fps Decoding (AI on) 1 × 16 MP @ 30 fps · 3 × 8 MP @ 30 fps · 4 × 5 MP @ 30 fps · 6 × 4 MP @ 30 fps · 8 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (independent AI chip, deep-learning) Face Detection (NVR) 1 channel · up to 12 face snapshots/sec Face Recognition (NVR) 1 ch (FD+FR by recorder) or 8 ch (FD by camera + FR by recorder) Face Database 10 databases · 20,000 images · 2.5 GB total · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 2 channels · 10 IVS rules per channel · human / vehicle filter SMD Plus 4 channels (by recorder) · 8 channels (by camera) ANPR (by camera) 4 channels · 20,000-plate database · blocklist / allowlist Quick Pick Yes (requires WizSense IPC pairing) AI Search Metadata search + face-image upload search across recorded video AI by Camera (passthrough) Face detection · Face recognition · Perimeter protection · SMD Plus · ANPR · People counting · Stereo analysis · Heat map HDD bays 2 × SATA · up to 16 TB per drive Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · simultaneous (configurable) Multi-screen display 1st screen: 1 / 4 / 8 / 9 · 2nd screen: 1 / 4 / 8 / 9 Audio I/O 1 × RCA in · 1 × RCA out Alarm I/O 4 × alarm in · 2 × alarm out (physical terminals) USB 2 × USB 2.0 (1 front · 1 rear) Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 8 × ports · 10/100 Mbps · IEEE 802.3af/at · 72 W total · 25.5 W per port (max) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UPnP · SNMP · RTSP · UDP · SMTP · NTP · DHCP · DNS · IP Filter · PPPoE · DDNS · FTP · Alarm Server · P2P · Auto Register ONVIF 21.12 (Profile T / S / G) · CGI · SDK Third-party camera support Panasonic · Sony · Samsung · Axis · Pelco · Arecont · Canon · ONVIF Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm Backup USB device · network Power supply 100 – 240 VAC · 47 – 63 Hz (internal universal-voltage PSU) Power consumption < 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 375 × 329.3 × 53 mm (Full 1U) Net weight 2.51 kg Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR4208-8P-AIANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua Smart Series HDD Installation Guide Frequently asked questions What's the difference vs the compact NVR4108HS-8P? The 4108HS is a smaller, lighter chassis with 1 HDD bay, no physical alarm terminals, and an external 53 VDC power adaptor. The 4208-8P (this model) uses the same full-size chassis as the 16-channel 4216 — 2 HDD bays for double the storage, 4 alarm-in / 2 alarm-out terminals on the rear panel, and an internal 100-240 VAC PSU with a standard kettle cord. Same 8 channels, same WizSense AI, same 72 W PoE budget. How many cameras can the built-in PoE actually power? All 8 ports deliver PoE+ up to 25.5 W each, but the total budget across the recorder is 72 W. In practice that's enough for 8 standard bullets/turrets at 5-9 W each, or roughly 2-3 high-power PTZ/IR-heavy cameras at 25 W each plus a few standard cams. Plan for ~9 W average per channel. Does this NVR support AcuPick? No — AcuPick is reserved for Dahua's 5-Series WizSense Plus NVRs paired with TiOC PV cameras. This is a 4-Series NVR, so it supports Quick Pick instead (the original colour/clothing-based target search). If you specifically need AcuPick, ask CCTV Guru about a 5-Series NVR. Will it work with my non-Dahua IP cameras? Yes. The NVR4208-8P-AI/ANZ supports ONVIF Profile T/S/G (version 21.12) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. AI features run best with Dahua WizSense cameras, but standard recording works with any ONVIF-compliant camera. What hard drives should I install? Use surveillance-rated SATA HDDs up to 16 TB each — Western Digital Purple or Seagate SkyHawk. Two drives can be configured as one large pool or kept as separate disk groups for camera-segregated recording. For 8 cameras at 4 MP H.265+, a pair of 6-8 TB drives gives ~60-90 days of retention. Can I view it on my phone? Yes — install the free DMSS app on iOS or Android, scan the QR code on the NVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. What can I wire into the alarm terminals? The 4 alarm inputs accept dry-contact NO/NC devices — PIR motion sensors, door reed switches, glass-break detectors, panic buttons or external trigger relays. The 2 alarm outputs are dry-contact relays that can drive sirens, strobe lights, electric gate triggers or a second relay stage. Linkable to record / snapshot / push-notification events in the NVR menu. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link VIGI NVR1108H-W — 8-Channel Wireless Network Video Recorder The TP-Link VIGI NVR1108H-W is an 8-channel wireless NVR designed for small to medium-sized businesses and professional installers who need a reliable, cable-reduced surveillance solution. Supporting up to 8MP resolution with H.265+ compression, it delivers sharp, storage-efficient footage across up to eight VIGI Wi-Fi cameras — all managed from a single, intuitive interface. Key Features 8-Channel Wi-Fi Recording — Connects up to 8 VIGI wireless IP cameras without running video cables Up to 8MP Resolution — Supports 4K recording for exceptional image clarity H.265+ Compression — Reduces storage consumption by up to 50% compared to H.264 Smart Detection — Intrusion detection, line crossing, and motion alerts with instant notifications 2-Way Audio — Real-time communication via compatible VIGI cameras 1 SATA HDD Bay — Supports up to 10TB HDD (sold separately) for extended local storage HDMI & VGA Output — Connect directly to a monitor for local live view and playback Remote Access — Monitor live and recorded footage via the VIGI app or web browser from anywhere PoE-Free Design — Wireless connectivity eliminates the need for PoE switches or long cable runs Easy Setup — Guided wizard and VIGI app pairing for fast deployment Use Cases Small Business Security — Retail shops, offices, and warehouses needing flexible camera placement without cable constraints Professional Installations — Installers deploying wireless VIGI camera systems with centralised NVR management Retrofit Projects — Upgrading existing sites where running new cabling is impractical or cost-prohibitive Multi-Zone Monitoring — Covering entrances, car parks, stockrooms, and common areas across a single recorder Technical Specifications Specification Detail Model VIGI NVR1108H-W Video Channels 8-Channel Max Resolution Up to 8MP (4K) Video Compression H.265+ / H.265 / H.264+ / H.264 Wireless Standard IEEE 802.11b/g/n (2.4GHz) HDD Bays 1 × SATA (up to 10TB, sold separately) Video Output 1 × HDMI, 1 × VGA Network Interface 1 × RJ45 10/100Mbps Ethernet USB Ports 2 × USB 2.0 Audio 1 × RCA Audio In, 1 × RCA Audio Out Smart Detection Intrusion, Line Crossing, Motion Detection Remote Access VIGI App (iOS & Android), Web Browser Power Supply DC 12V / 2A Dimensions 260 × 226 × 48 mm Operating Temperature -10°C to 55°C Certifications CE, FCC, RoHS Official Product Video Watch the official TP-Link VIGI NVR overview to see the system in action: Note: Visit the TP-Link YouTube channel for the latest VIGI NVR setup guides and feature walkthroughs. Recommended Accessories & Compatible Products VIGI C340-W — 4MP Outdoor Wi-Fi Dome Camera, ideal pairing for this NVR VIGI C330-W — 3MP Outdoor Wi-Fi Dome Camera for budget-conscious deployments VIGI C240-W — 4MP Indoor Wi-Fi Dome Camera for internal zones Compatible 3.5" SATA HDD — Up to 10TB for extended local recording (sold separately) UPS Battery Backup — Recommended for continuous recording during power interruptions Downloads VIGI NVR1108H-W Datasheet (TP-Link AU) Firmware & Quick Installation Guide Frequently Asked Questions How many cameras can the VIGI NVR1108H-W support? The NVR1108H-W supports up to 8 VIGI Wi-Fi IP cameras simultaneously over its built-in wireless interface or via the wired network port. Does the NVR1108H-W come with a hard drive? No — the unit ships without a HDD. It supports one 3.5" SATA hard drive up to 10TB capacity, which is available separately. We recommend a surveillance-grade HDD such as the WD Purple or Seagate SkyHawk series. Can I access recordings remotely? Yes. The VIGI NVR1108H-W supports remote live view and playback via the free VIGI Security app (iOS and Android) and through a web browser using the device's IP address or TP-Link's cloud service. Is the NVR1108H-W compatible with non-VIGI cameras? The NVR1108H-W is optimised for TP-Link VIGI cameras. It supports ONVIF-compliant third-party IP cameras via the wired network port, though some advanced features such as smart detection may only be available with VIGI cameras. What is the maximum recording resolution? The NVR1108H-W supports recording at up to 8MP (4K) resolution per channel, depending on the connected camera's capability. Does it support continuous 24/7 recording? Yes. The NVR supports continuous, scheduled, and motion/event-triggered recording modes, configurable per channel. What warranty applies in Australia? TP-Link products sold in Australia are covered by a standard 3-year warranty. Please refer to TP-Link AU's warranty policy or contact us for details.

Read more less

TP-Link VIGI NVR2016H-16P 16-Channel PoE+ Network Video Recorder Professional 16-Channel NVR Built for Australian Businesses The TP-Link VIGI NVR2016H-16P is a purpose-built 16-channel PoE+ network video recorder designed for small to medium businesses across Australia. With 4K HDMI output, H.265+ compression, and 16 dedicated PoE+ ports, it simplifies IP camera deployment while delivering sharp, reliable surveillance around the clock. Key Features 4K HDMI Output & 16MP Decoding: Supports up to 8MP (4K) resolution per camera with 8-channel simultaneous 2MP decoding for live view and playback. 16 × PoE+ Ports (90 W Total Budget): 802.3af/at-compliant ports power and connect IP cameras over a single Ethernet cable — no separate power adapters required. 16-Channel Simultaneous Playback: Review footage from all 16 cameras at once, with variable playback speed and timeline-based event search. H.265+ Compression: Reduces file sizes significantly without compromising image quality, saving storage space and reducing network load. ONVIF Compatibility: Integrates seamlessly with VIGI cameras and third-party ONVIF-compliant IP cameras for flexible system design. Auto Initialise: One-click setup configures connected cameras and hard disk parameters, cutting installation time considerably. 24/7 Continuous Recording: Supports up to 20 TB of storage (up to 1,048 recording days) with customisable recording schedules. Two-Way Audio: Built-in voice intercom lets you communicate through compatible cameras — ideal for deterring intruders remotely. Remote Monitoring: Manage and view live feeds from anywhere via the VIGI app (iOS & Android) or desktop client. Use Cases Small Business Security: Ideal for retail shops, restaurants, warehouses, and financial institutions requiring reliable multi-camera coverage. Commercial Installations: Suits professional CCTV installers deploying scalable IP camera systems with centralised management. DIY Home Security: Straightforward setup and the VIGI app make it accessible for technically confident homeowners wanting professional-grade recording. Remote Site Monitoring: Remote access via app or client enables monitoring of unmanned sites, storage facilities, and car parks. Specifications Specification Detail Model VIGI NVR2016H-16P Channels 16 PoE Ports 16 × 802.3af/at (PoE+) Total PoE Budget 90 W Max Resolution 8MP (4K) Video Output HDMI (4K), VGA Decoding Capacity 16MP total; 8-ch @ 2MP Simultaneous Playback 16 channels Video Compression H.265+, H.265, H.264+, H.264 HDD Bays 2 (up to 20 TB total) Max Storage 20 TB Network Interface 1 × RJ45 Gigabit Ethernet Compatibility ONVIF, VIGI IP Cameras Remote Access VIGI App (iOS & Android), VIGI Client (PC) Two-Way Audio Yes (via compatible cameras) Weight 3.86 kg Barcode (EAN) 4895252504040 CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads VIGI NVR2016H-16P Datasheet (PDF) Frequently Asked Questions Does the NVR2016H-16P come with hard drives? No, hard drives are sold separately. The unit supports up to two HDDs with a combined capacity of up to 20 TB. We recommend surveillance-grade drives such as Western Digital Purple or Seagate SkyHawk. Can I use non-TP-Link cameras with this NVR? Yes. The NVR2016H-16P supports ONVIF-compliant IP cameras from other manufacturers, giving you flexibility when designing or expanding your system. How many cameras can I connect? Up to 16 IP cameras can be connected simultaneously via the built-in PoE+ ports. Each port supports 802.3af/at standards, with a total PoE budget of 90 W shared across all ports. Can I monitor cameras remotely? Yes. The free VIGI app (available on iOS and Android) and the VIGI Security Manager desktop client allow remote live viewing, playback, and system management from anywhere with an internet connection. What is the maximum storage capacity? The NVR supports up to 20 TB of storage across two HDD bays. Use our storage calculator to estimate recording time for your connected cameras and recording settings. Is this NVR suitable for outdoor use? The NVR unit itself is designed for indoor installation. For outdoor surveillance, pair it with VIGI outdoor-rated IP cameras that connect back to the NVR via PoE cabling.

Read more less

WizSense + AcuPick · 5-Series · 16-Channel · 32 MP · 4K 16CH AcuPick NVR The Dahua DHI-NVR5216-16P-AI/ANZ is a 16-channel 5-Series WizSense AI NVR with AcuPick, 16 built-in PoE+ ports (1–8 support ePoE), 4K HDMI output and an industrial-grade AI chip that doubles the channel counts and analytics depth of Dahua's 4-Series. Record up to 32 MP per channel, run 16 channels of AcuPick search, and stream 384 Mbps through a full-1U chassis with dual SATA bays, hardware alarm I/O, RS-232 + RS-485 serial, and N+M cluster failover. This is the official Australia / NZ-market SKU (the AI/ANZ suffix), shipping with regional firmware, an internal 100–240 VAC universal PSU, and a local 3-year warranty backed by CCTV Guru in Sydney. The premium NVR in our Dahua range — built for enterprise installs, multi-site retail, transport hubs and any site that needs the strongest AI search and recall available in the WizSense lineup. AcuPick — find anyone, anything, in seconds AcuPick Channels Up to 16 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans every channel for matches across hours or days — clothing colour, body shape, vehicle model and direction included. Front- + back-end intelligence Camera-side AI extracts the target attributes during recording; NVR-side AI runs the comparison. The result is far higher accuracy than recorder-only search — and orders of magnitude faster than human review. 16 channels of AcuPick Run AcuPick across all 16 channels simultaneously when paired with WizSense IPC. Investigations that used to take an afternoon now finish before the kettle boils. Beyond Quick Pick AcuPick is the next generation of Dahua's Quick Pick — more attributes, more accuracy, and supports both people and vehicles natively. Exclusive to the 5-Series NVR family. 5-Series WizSense AI — more channels, more depth Industrial AI Chip Double the channel counts of 4-Series Face Database 20 databases · 20,000 images Face Recognition (2 ch by NVR) 2 channels of full face detection + recognition by the recorder (12 face snapshots/sec each), or up to 16 channels using camera-side detection feeding NVR-side recognition. Twenty face databases. Perimeter Protection (4 ch) 4 NVR-side channels of tripwire and intrusion analytics with 10 IVS rules each — double the 4-Series. Human/vehicle classification cuts false alarms from animals, weather and lighting. SMD Plus on 8 channels Smart Motion Detection Plus runs deep-learning second-pass classification on 8 channels simultaneously by the NVR, or 16 channels via camera-side processing. ANPR by camera (8 channels) Pair with Dahua ANPR cameras for 8 channels of licence-plate recognition feeding a 20,000-plate database with full blocklist / allowlist control. Ideal for carparks, fleet yards and gate management. Video Metadata search Search recorded video by structured attributes — top colour, bottom colour, hat, bag, umbrella, gender, age range, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for critical sites. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 32 MP recording · 4K display · 32 TB storage Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 5 MP and 4 MP IP cameras from any ONVIF brand. 384 Mbps bandwidth 384 Mbps incoming / record / outgoing with AI off, 200 Mbps with AI active — enough for 16 cameras at 8 MP each, or a mix of 32 MP / 4 MP feeds. 4K HDMI + 1080p VGA Heterogeneous output — drive a 4K spot monitor on HDMI and a 1080p control PC on VGA, each running independent layouts. 16-split available on both screens. 2 SATA bays · ~32 TB max Two surveillance-grade HDD bays (WD Purple, Seagate SkyHawk) up to 16 TB per drive. iSCSI adds external network storage when on-board capacity isn't enough. 32-channel 1080p decoding Far more horsepower than the channel count suggests — happily decodes a sub-stream wall of 32 1080p tiles for control-room monitor walls. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels while preserving detail on moving targets — roughly half the storage and bandwidth of standard H.264. ePoE · alarm I/O · serial — built for installers ePoE on ports 1–8 The first 8 PoE ports support Dahua ePoE — extended-distance PoE up to 800 m on Cat6 (and 300 m at full 100 Mbps). Eliminates intermediate switches on long perimeter runs. 4 alarm-in / 2 alarm-out Physical terminal block on the rear panel — wire in PIRs, door sensors, glass-break detectors, panic buttons, sirens or gate triggers for hardware-level event linkage. RS-232 + RS-485 Both serial standards present — integrate with POS systems, gate controllers, access control panels, intercoms or third-party VMS that need legacy serial. ONVIF 22.06 (T / S / G) Latest ONVIF profile support — drops into any modern VMS, and accepts cameras from Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon as well as Dahua. DMSS mobile + iSCSI storage Free iOS / Android DMSS viewer with live view, playback, push notifications and P2P remote access. iSCSI lets you expand storage onto any compatible network appliance. 3-Year Australian warranty Backed locally by CCTV Guru in Sydney with replacement stock on hand. No overseas RMA, no shipping back to the manufacturer — a real Australian warranty. NVR5216-16P vs NVR4216-16P — how it compares Both are 16-channel, 16-PoE, full-1U Dahua NVRs with the same chassis, dual HDD bays and Australian warranty. The 5216 (this model) is the premium AI tier — AcuPick, 32 MP, ePoE, N+M cluster and roughly double the AI channel counts. The 4216 is the value option when AcuPick and 32 MP aren't required. 16-Channel NVR Tier Comparison Specification NVR5216-16P-AI/ANZ (this model) NVR4216-16P-AI/ANZ AI tier 5-Series · AcuPick supported 4-Series · Quick Pick only AcuPick Yes · up to 16 channels No Max camera resolution 32 MP per channel 16 MP per channel Bandwidth (AI off / on) 384 / 200 Mbps 256 / 180 Mbps Face Detection (by NVR) 2 channels 1 channel Face Database 20 databases · 20,000 images 10 databases · 20,000 images Perimeter Protection (by NVR) 4 channels 2 channels SMD Plus (by NVR) 8 channels 4 channels ANPR (by camera) 8 channels 4 channels Video metadata search Yes Limited PoE / ePoE 16 × 130 W · ports 1-8 ePoE 16 × 130 W · no ePoE RS-232 / RS-485 Both RS-232 only USB 1 × 2.0 + 1 × 3.0 2 × USB 2.0 ONVIF version 22.06 (T / S / G) 21.12 (T / S / G) N+M cluster · iSCSI Yes / Yes No / No HDD bays 2 SATA · up to 32 TB 2 SATA · up to 32 TB 4K HDMI · DMSS · Warranty Yes / Yes / 3 years Yes / Yes / 3 years Full Specifications Model DHI-NVR5216-16P-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor Full 1U · 2-HDD · rack or desktop IP channels 16 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 20 fps · 2 × 24 MP @ 20 fps · 4 × 16 MP @ 30 fps · 8 × 8 MP @ 30 fps · 16 × 4 MP @ 30 fps Decoding (AI on) 1 × 32 MP @ 20 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 8 × 5 MP @ 30 fps · 12 × 4 MP @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 16 channels · 1 combined event per channel/sec (AI by Camera + Recorder) Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 16 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · 16 channels by camera · 10 IVS rules per channel SMD Plus 8 channels by NVR · 16 channels by camera Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) 8 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster Yes (high-availability failover) iSCSI Yes (network storage expansion) HDD bays 2 × SATA · up to 16 TB per drive Video output 1 × HDMI (4K · 3840×2160) + 1 × VGA (1080p) · heterogeneous (independent layouts) Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 · Sub screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 1 × RCA out Alarm I/O 4 × alarm in · 2 × alarm out (physical terminals) USB 1 × front USB 2.0 · 1 × rear USB 3.0 Network port 1 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) PoE 16 × ports · 10/100 Mbps · IEEE 802.3af/at · 130 W total · 25.5 W per port · ports 1-8 support ePoE RS-232 / RS-485 1 / 1 Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UDP · SNMP · NTP · DHCP · DNS · SMTP · UPnP · IP Filter · PPPoE · FTP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF 22.06 (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Samsung Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 47 – 63 Hz (internal universal-voltage PSU) Power consumption ≤ 10 W NVR-side (without HDD, PoE load excluded) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 375 × 329.3 × 53 mm (Full 1U) Net weight 2.66 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5216-16P-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua Smart Series HDD Installation Guide Frequently asked questions What is AcuPick and how is it different to Quick Pick? AcuPick is Dahua's next-generation video search technology — it uses BOTH camera-side and NVR-side AI to extract rich attributes (clothing, body shape, vehicle make/model/colour/plate, direction, action) from every frame as it records, then lets you search by a reference image OR by combined attributes. Quick Pick (on the 4-Series) does single-attribute colour/clothing search only. AcuPick is faster, more accurate, and supports both people and vehicles natively. Do I need special cameras for AcuPick? Yes — AcuPick relies on camera-side intelligence to extract attributes during recording. You need Dahua's WizSense-Plus AcuPick-ready cameras (typically the TiOC PV and 5-Series IPC families). Standard WizSense cameras will still record and recognise faces, but the full AcuPick search depth needs paired AcuPick IPCs. What does ePoE on ports 1–8 give me? Extended PoE — long-distance Cat6 runs at reduced speed. Ports 1–8 support 100 Mbps up to 300 m or 10 Mbps up to 800 m (most IP cameras work fine at 10 Mbps for sub-stream + main-stream H.265+). Eliminates intermediate switches on long perimeter or carpark runs. Ports 9–16 run standard PoE+ at up to 100 m. What is N+M cluster and when do I need it? N+M cluster lets you pair multiple 5-Series NVRs so that backup recorders automatically take over if a primary unit fails — zero footage loss for critical sites. Useful for casinos, banks, transport hubs, hospitals and any install where a single-recorder outage would breach SLA. Configure via the NVR's local GUI or DSS-Pro. Will it work with my non-Dahua IP cameras? Yes. The NVR5216-16P-AI/ANZ supports ONVIF Profile T/S/G (version 22.06) and has native integration for Panasonic, Sony, Samsung, Axis, Pelco, Arecont and Canon. Standard recording works with any ONVIF camera; AcuPick and the deeper AI search features require Dahua WizSense / AcuPick IPCs. How much storage do I need for 16 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can I view it on my phone? Yes — install the free DMSS app on iOS or Android, scan the QR code on the NVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link VIGI NVR1016H 16-Channel Network Video Recorder Professional 16-Channel NVR for Continuous 24/7 Surveillance The TP-Link VIGI NVR1016H is a 16-channel network video recorder built for reliable, around-the-clock security monitoring. Supporting resolutions up to 8MP and storing up to 10TB of footage locally on a single SATA hard drive, it's a capable and cost-effective NVR for small to medium commercial installations, retail environments, and larger residential properties across Australia. Manage and monitor your cameras remotely via the dedicated VIGI app — from anywhere, at any time. Key Features 16-channel IP video input — supports cameras up to 8MP resolution 24/7 continuous recording — stores up to 10TB on a single SATA HDD (not included) H.265+ compression — reduces file sizes and bandwidth usage without sacrificing image quality 16-channel simultaneous live view at up to 8MP HDMI and VGA outputs — connect to a monitor or TV for on-site viewing Quick footage lookup by date, event type, and tags with variable playback speeds ONVIF compatible — works with VIGI and third-party IP cameras Two-way audio — voice intercom support for remote communication Remote monitoring via the VIGI app (iOS & Android) Fanless design — silent operation, suitable for office and retail environments Use Cases Small to Medium Businesses: Monitor up to 16 cameras across a retail store, warehouse, or office with centralised local recording and remote access. Commercial Installations: ONVIF compatibility allows integration with existing third-party IP camera infrastructure. Residential Properties: Ideal for larger homes or acreage properties requiring multi-camera coverage with local storage. Remote Site Monitoring: Use the VIGI app to check live feeds and review footage from any location via smartphone. Two-Way Communication: Pair with VIGI cameras featuring speakers and microphones for intercom functionality at entry points or gates. Specifications Specification Detail Model VIGI NVR1016H Video Input 16-channel IP, up to 8MP Max Recording Resolution 8MP / 5MP / 4MP / 3MP / 1080p / 720p and more Video Output HDMI + VGA (up to 1920×1080p @ 60Hz) Compression H.265+ / H.265 / H.264+ / H.264 HDD Interface 1 × SATA (up to 10TB, HDD not included) Incoming Bandwidth 80 Mbps Outgoing Bandwidth 60 Mbps Network Protocol TCP/IP, DHCP, DNS, NTP, UPnP ONVIF Yes — compatible with VIGI and third-party cameras Two-Way Audio Yes Remote Access VIGI App (iOS & Android) Power Supply 12V DC / 1.5A Power Consumption 4.25W (without HDD) / 13.10W (with HDD) Dimensions (H × W × D) 246.2 × 148.2 × 45 mm Operating Temperature −10°C to 55°C Weight 578.5 g (without HDD) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Frequently Asked Questions Does the NVR1016H come with a hard drive? No. The NVR1016H supports one SATA hard drive up to 10TB, which must be purchased separately. We recommend a surveillance-grade HDD (e.g., Western Digital Purple or Seagate SkyHawk) for reliable 24/7 operation. How many days of footage can it store? Recording duration depends on your connected cameras, bitrate and recording schedule. Use our storage calculator to estimate hard drive capacity and recording time for this NVR. Is it compatible with non-VIGI cameras? Yes. The NVR1016H supports ONVIF-compliant IP cameras from other manufacturers, allowing integration into mixed-brand installations. Full feature support (e.g., smart detection, two-way audio) is only guaranteed with VIGI cameras. Can I access footage remotely? Yes. Download the free VIGI app on iOS or Android to view live feeds, play back recorded footage, and receive event notifications from anywhere with an internet connection. Does it support PoE to power cameras? No. The NVR1016H does not have built-in PoE ports. Cameras must be powered separately via a PoE switch or individual power adapters. For an all-in-one PoE NVR solution, consider the VIGI NVR1016H-16P. What resolution does the HDMI output support? The HDMI output supports up to 1920×1080p at 60Hz, suitable for connecting to a full HD monitor or TV for on-site live view and playback.

Read more less

Dahua WizSense · 16-Channel Penta-brid 4K XVR · 5-in-1 HDCVI/AHD/TVI/CVBS/IP · 2 HDD Bays 16CH 4K XVR Dahua DH-XVR5216A-4KL-I3 — 16-Channel Penta-brid 4K WizSense XVR (5-in-1, 2 HDD Bays) The Dahua DH-XVR5216A-4KL-I3 is a 16-channel Penta-brid WizSense recorder that accepts five signal types on every BNC — HDCVI, AHD, TVI, CVBS and IP — so it records existing coax cameras and modern IP cameras side by side, up to 4K. WizSense AI brings SMD Plus, IVS perimeter protection and face detection to cut false alerts and speed up footage search, while Smart H.265+ keeps storage costs low. With 2 HDD bays, up to 32 IP channels and 128 Mbps incoming bandwidth, it's an ideal upgrade path for analogue sites moving to AI surveillance. Channels 16CH · 16 BNC Inputs Penta-brid 5-in-1 Resolution Up to 4K AI SMD+ · IVS · Face Storage 2 HDD Bays Bandwidth 128 Mbps · 32 IP CH Penta-brid 5-in-1 — Mix Coax & IP Every channel accepts HDCVI, AHD, TVI, CVBS or IP. Keep your existing coax cameras and add IP cameras over time — the perfect bridge from analogue to a modern AI system without rewiring. WizSense AI — Fewer False Alerts SMD Plus classifies people and vehicles and ignores animals, foliage and weather; IVS adds tripwire and intrusion zones; face detection runs on up to 2 channels — so you're alerted on what matters and find events faster. Up to 4K · Smart H.265+ Records up to 4K with Smart H.265+ dual-stream compression and full-channel AI coding, cutting storage and bandwidth without sacrificing image quality. 2 HDD Bays · Built to Scale Two SATA bays for big, redundant storage, up to 32 IP channels and 128 Mbps incoming. IoT and POS integration, P2P remote access via DMSS, and a smart cooling fan for quiet, reliable operation. Specifications — DH-XVR5216A-4KL-I3 Recorder Type 16-Channel Penta-brid WizSense XVR (XVR / NVR / HD Recorder) Signal Inputs HDCVI · AHD · TVI · CVBS · IP (5-in-1) BNC Ports 16 × BNC IP Channels Up to 32 IP cameras (each up to 8MP) Max. Resolution 4K Incoming Bandwidth 128 Mbps AI — SMD Plus Up to 16 channels (analog) AI — Perimeter Protection (IVS) Up to 2 channels (analog) AI — Face Detection Up to 2 channels (analog) Compression Smart H.265+ / H.265 / H.264 · dual-stream · full-channel AI coding HDD Bays 2 × SATA (HDD not included) Extras IoT & POS · Smart Search · Smart Fan · P2P (DMSS) · ONVIF Form Factor 1U Warranty (Australia) 3 years · CCTV Guru Australia Downloads & Resources DH-XVR5216A-4KL-I3 Datasheet Dahua Digital Video Recorder Quick Start Guide Dahua HDCVI AI DVR User Manual What does Penta-brid mean?The XVR accepts five signal types on each channel — HDCVI, AHD, TVI, CVBS and IP. You can run existing coax cameras and modern IP cameras on the same recorder, which makes it an easy upgrade from an old analogue system. Can I connect IP cameras too?Yes — it supports up to 32 IP channels (each up to 8MP) in addition to the 16 BNC inputs, with 128 Mbps incoming bandwidth. Does it include a hard drive?No — it has two SATA bays but ships without storage. Add surveillance-grade WD Purple or Seagate SkyHawk drives sized to your camera count and retention. What AI features does it have?WizSense SMD Plus (up to 16 ch), IVS perimeter protection (up to 2 ch) and face detection (up to 2 ch), plus smart search to jump straight to events. Can I view it remotely?Yes — free DMSS app (iOS/Android) via P2P, no static IP or port forwarding required. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua WizSense · 4-Channel Penta-brid 4K XVR · 5-in-1 HDCVI/AHD/TVI/CVBS/IP · Compact 1U 4CH 4K XVR Dahua DH-XVR5104HS-4KL-I3 — 4-Channel Penta-brid 4K WizSense XVR (Compact 1U, 1 HDD) The Dahua DH-XVR5104HS-4KL-I3 is a compact 4-channel Penta-brid WizSense recorder that accepts five signal types — HDCVI, AHD, TVI, CVBS and IP — so it records existing coax cameras and modern IP cameras side by side, up to 4K. WizSense AI adds SMD Plus, IVS perimeter protection and face detection to cut false alerts, with Smart H.265+ to keep storage low. A tidy compact 1U chassis with one HDD bay makes it perfect for homes and small businesses upgrading an analogue system. Channels 4CH · 4 BNC Inputs Penta-brid 5-in-1 Resolution Up to 4K AI SMD+ · IVS · Face Storage 1 HDD Bay Bandwidth 64 Mbps · 8 IP CH Penta-brid 5-in-1 — Mix Coax & IP Every channel accepts HDCVI, AHD, TVI, CVBS or IP — keep your existing coax cameras and add IP cameras over time without rewiring. WizSense AI — Fewer False Alerts SMD Plus classifies people and vehicles and ignores animals and foliage; IVS adds tripwire and intrusion; face detection runs on 1 channel — fewer nuisance alerts and faster search. Up to 4K · Smart H.265+ Records up to 4K with Smart H.265+ dual-stream compression and full-channel AI coding to keep storage and bandwidth low. Compact 1U · 1 HDD A tidy compact chassis with one SATA bay, up to 8 IP channels and 64 Mbps incoming. IoT and POS integration, P2P remote access via DMSS, smart cooling. Specifications — DH-XVR5104HS-4KL-I3 Recorder Type 4-Channel Penta-brid WizSense XVR (Compact 1U) Signal Inputs HDCVI · AHD · TVI · CVBS · IP (5-in-1) BNC Ports 4 × BNC IP Channels Up to 8 IP cameras (each up to 8MP) Max. Resolution 4K Incoming Bandwidth 64 Mbps AI — SMD Plus Up to 4 channels (analog) AI — Perimeter Protection / Face Up to 1 channel each (analog) Compression Smart H.265+ / H.265 · dual-stream · full-channel AI coding HDD Bays 1 × SATA (HDD not included) Extras IoT & POS · Smart Search · Smart Fan · P2P (DMSS) · ONVIF Warranty (Australia) 3 years · CCTV Guru Australia Downloads & Resources DH-XVR5104HS-4KL-I3 Datasheet Dahua Digital Video Recorder Quick Start Guide Dahua HDCVI AI DVR User Manual What does Penta-brid mean?The XVR accepts five signal types on each channel — HDCVI, AHD, TVI, CVBS and IP — so you can run existing coax cameras and modern IP cameras on the same recorder. An easy upgrade from an old analogue system. Can I connect IP cameras too?Yes — up to 8 IP channels (each up to 8MP) in addition to the 4 BNC inputs, with 64 Mbps incoming bandwidth. Does it include a hard drive?No — it has one SATA bay but ships without storage. Add a surveillance-grade WD Purple or Seagate SkyHawk drive. Can I view it remotely?Yes — free DMSS app (iOS/Android) via P2P, no static IP or port forwarding required. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Home & SOHO Storage Synology Plus Series: Essential Reliability for 24/7 Systems The Synology Plus Series HAT3300 (4TB & 6TB) provides the perfect balance of quiet operation and rugged reliability. Purpose-built for small office and home NAS environments, these drives utilize Conventional Magnetic Recording (CMR) technology. This ensures superior data integrity and faster RAID rebuilds compared to standard desktop SMR drives, making them the gold standard for entry-level professional storage. Technology 5400 RPM CMR Reliability 1.0M Hrs MTBF 4TB vs 6TB: Capacity Comparison The HAT3300 series is optimized for low power consumption and reduced noise, ideal for desktop NAS units kept in living areas or quiet office spaces. Specification HAT3300-4T HAT3300-6T Capacity 4 TB 6 TB Sustained Data Transfer 202 MB/s 202 MB/s Rotational Speed 5,400 RPM 5,400 RPM Cache (Buffer Size) 256 MB 256 MB Recording Tech CMR CMR Workload Rating 180 TB / Year 180 TB / Year Interface SATA 6 Gb/s SATA 6 Gb/s Why Choose Synology Plus Series? DSM Integration Enjoy automatic firmware updates and health monitoring directly through Synology DiskStation Manager (DSM), keeping your data protected without manual effort. Quiet & Cool Operation The 5400 RPM motor is specifically designed to minimize vibration and heat, extending the life of your NAS hardware and reducing environmental noise. Tested for Compatibility Over 300,000 hours of rigorous testing ensures these drives handle multi-user workloads and demanding 24/7 uptime requirements. Reliable RAID Performance Tuned to prevent drive drop-outs, the Plus series offers significantly more stability in RAID configurations than standard "Blue" or desktop-class drives. Frequently Asked Questions Will this work in Hikvision, Dahua, or UniFi Protect? Yes. The HAT3300 is a standard 3.5" SATA drive. It is fully compatible with Hikvision NVRs, Dahua NVRs, and Ubiquiti UniFi (Dream Machine Pro, UNVR) systems as a reliable, cool-running storage option. Is 5400 RPM fast enough for 4K video? Absolutely. For NAS and NVR storage, data density is more important than raw RPM. These drives easily handle multiple 4K video streams simultaneously while staying cooler than 7200 RPM models. How does the firmware update work? Unlike other brands, Synology Plus drives allow you to update firmware directly through DiskStation Manager (DSM). This ensures your drives stay compatible with the latest OS features without data risk. What is the warranty period? These drives come with a 3-year limited warranty, fully supported by our Australian technical team at CCTV Guru, providing peace of mind for your 24/7 surveillance or data storage. Downloads & Documentation Download PDF Full Data Sheet (HAT3300) 3-Year Warranty Genuine Stock AU Tech Support

Read more less

Hikvision AcuSense · 4 × 6MP · 4CH 4K NVR · 4 PoE 4 × 6MP AcuSense Kit Hikvision 4 × 6MP AcuSense CCTV Kit with 4-Channel 4K PoE NVR The Hikvision 4-Camera 6MP AcuSense Kit is a ready-to-install bundle for Australian homes and small businesses — front and back entries, driveways, garages, shopfronts and offices. It pairs four DS-2CD2366G2-IU 6MP AcuSense turret cameras with a DS-7604NI-I1/4P 4-channel 4K NVR. AcuSense deep-learning AI classifies people and vehicles to cut false alarms, and all four PoE ports power each camera over a single Cat6 run. Cameras 4 × 6MP Recorder 4CH 4K NVR · 4 PoE Smart AI AcuSense Human/Vehicle Night Vision Smart IR up to 30 m Audio Built-in Mic Storage 1 × SATA (add HDD) 6MP AcuSense Detail A 1/2.4" sensor captures 3072 × 2048 detail with the headroom to digitally zoom into recorded footage and still identify a face or number plate. AcuSense AI — Fewer False Alarms Deep-learning classification separates people and vehicles from animals, foliage and shadows, so only real events trigger alerts and recording. 4-Port PoE — Plug & Play One Cat6 cable per camera carries power and video to the NVR's four built-in PoE ports — no separate power supplies, no extra switch. 4K Recording & Playback The 4-channel NVR records and plays back every camera at up to 8MP with efficient H.265+ compression for longer retention on a single drive. What's Included 4 × Cameras DS-2CD2366G2-IU — 6MP AcuSense turret, 2.8 mm wide-angle, Smart IR 30 m, 120 dB WDR, built-in mic, IP67. Each ships with mounting bracket, drill template, screws & quick start guide. 1 × Recorder DS-7604NI-I1/4P — 4-channel 4K NVR with 4 built-in PoE ports, single SATA bay, up to 8MP per channel, 4K HDMI output and Hik-Connect remote access. Storage One SATA bay (up to 16 TB) — add a surveillance-grade HDD sized to your retention needs (Seagate SkyHawk or WD Purple recommended). Power 4 × PoE ports built into the NVR — one Cat6 network cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Mounting Brackets and templates included for eave/soffit installs. For brick or flush-wall mounting, add a Hikvision wall-mount bracket per camera; a junction box is also available for tidy cable management. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Genuine Hikvision Australian stock. Best For Family homes Front and back doors, driveway and side gates with 6MP face and plate detail. Small shopfronts Entry, counter, stockroom and rear access with built-in audio recording. Home offices Garage, entry and yard coverage with remote viewing on your phone. Townhouses & units Compact four-camera coverage for entries, balconies and car spaces. Cafes & salons Service area, till, back-of-house and entry with day/night clarity. Outdoor perimeters IP67 weatherproof cameras for fences, gates and driveways in all weather. Camera Specifications — DS-2CD2366G2-IU Camera Type 6MP AcuSense Fixed Turret Image Sensor 1/2.4" Progressive Scan CMOS Max. Resolution 6MP · 3072 × 2048 Lens Fixed 2.8 mm wide-angle Night Vision Smart IR up to 30 m WDR 120 dB True WDR AI Functions AcuSense · human & vehicle classification · perimeter protection Audio Built-in microphone (1-way) On-Board Storage microSD / SDHC / SDXC up to 256 GB Compression H.265+ / H.265 / H.264+ / H.264 Network RJ-45 10/100 Mbps · PoE supported Power 12 VDC / PoE (IEEE 802.3af) Ingress Protection IP67 Warranty (Australia) 3 years · CCTV Guru Australia Recorder Specifications — DS-7604NI-I1/4P Channels 4 IP channels · up to 4-ch input Recording Resolution 2-ch @ 12 MP (20 fps) / 4-ch @ 8 MP (25 fps) Playback 4-ch synchronous playback up to 8MP PoE 4 × PoE ports (IEEE 802.3 af/at) Storage 1 × SATA (up to 16 TB) · HDD not included Video Output 1 × HDMI (4K) + 1 × VGA AI Functions AcuSense human/vehicle · perimeter (with compatible cameras) Compression H.265+ / H.265 / H.264+ / H.264 Remote / App Hik-Connect (iOS & Android) · P2P · ONVIF Installation Notes ›Cabling: run solid-copper Cat6 from each camera back to the NVR's PoE ports for stable power and video over long distances. ›Weatherproofing: even at IP67, seal outdoor RJ-45 joins with weatherproof tape or a junction box to keep out moisture and salt air. ›Storage sizing: fit a surveillance-grade HDD to suit your retention — a 2–4 TB drive covers weeks of continuous H.265+ recording across four 6MP channels. Setup & Demo Videos — Hikvision AcuSense — human & vehicle detection AcuSense NVR — smart false-alarm filtering Official NVR & Camera Setup Videos Use these official Hikvision tutorials to complete the recorder startup wizard and connect the supplied PoE cameras. Menu names may vary slightly with firmware version. NVR 5.0 Startup Wizard — Official Hikvision Tutorial Add a PoE Camera to NVR 5.0 — Official Hikvision Tutorial Downloads & Resources DS-2CD2366G2-IU Datasheet DS-7604NI-I1/4P Datasheet Hikvision Camera Quick Start Guide Does this kit include a hard drive?The NVR has one free SATA bay — add a surveillance-grade HDD sized to your needs. A 2–4 TB drive covers weeks of continuous H.265+ recording across four 6MP channels. How does AcuSense reduce false alarms?Deep-learning AI classifies motion as human, vehicle or other, so leaves, animals and shadows don't trigger alerts — only real events reach your phone. What resolution are the cameras?Each camera is true 6MP at 3072 × 2048 — sharper than 4MP/1080p, with the headroom to digitally zoom into recorded footage and still read faces and plates. How are the cameras powered?Each camera runs on a single Cat6 cable to one of the NVR's four built-in PoE ports — no separate power supplies. Cat6 cabling is run on site and not included. Can I view the cameras remotely?Yes — the free Hik-Connect app (iOS & Android) gives live view, playback and motion alerts from anywhere. The NVR also supports ONVIF for third-party systems. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Uniview UNV · 4 × 6MP OwlView ColorHunter · 24/7 Full Colour · 8CH AI IQ NVR · NDAA 4 × 6MP OwlView Kit Uniview UNV 6MP OwlView CCTV Kit — 4 × Full 24/7 Colour Cameras + 8-Channel AI IQ NVR This Uniview UNV 6MP OwlView kit pairs four IPC3626LE-ADF28K-WP ColorHunter turret cameras with the NVR501-08B-P8-IQ 8-channel AI IQ recorder for true full-colour surveillance around the clock. Each camera uses a large 1/1.8″ sensor, a fast F1.0 2.8 mm lens and Wise-ISP processing to capture bright, vivid colour after dark — with smart warm-light LEDs reaching 30 m for driveways, yards and entries. All four run on a single Cat6 cable each into the NVR's 8 built-in PoE ports, leaving 4 channels free to expand later. The whole kit is NDAA Section 889 compliant and backed by a 3-year Australian warranty. Available in white or black. Cameras 4 × 6MP OwlView ColorHunter Recorder 8CH AI IQ NVR · 8 PoE Night Vision 24/7 Full Colour · 30 m AI Search AcuSearch · AcuTrack · SeekFree Audio Built-in Mic Weatherproof IP67 Rated OwlView ColorHunter — Full Colour All Night The 1/1.8″ sensor, F1.0 lens and Wise-ISP processing capture true full-colour detail in near-darkness, with smart warm-light LEDs to 30 m — so you record clothing colour, faces and vehicles in colour 24/7, not just black-and-white IR. Smart AI Detection On-camera human and vehicle detection with line-crossing and intrusion alerts filters out trees, rain and shadows, so only real events reach your phone. 120 dB true WDR keeps bright and shaded areas balanced. AI IQ Recorder — Find Events Fast The NVR501-IQ adds AcuSearch, AcuTrack and SeekFree: filter footage by people or vehicles, follow a target across cameras, or search recordings in plain language — find what you need in seconds instead of scrubbing for hours. One-Cable PoE Install Eight built-in PoE ports power and connect each camera over a single Cat6 run — no separate switch or power supplies. 4K HDMI output, free EZCloud/UNV-Link remote viewing, and 4 spare channels to grow into. What's Included 4 × Cameras IPC3626LE-ADF28K-WP — 6MP OwlView ColorHunter turret, 1/1.8″ sensor, F1.0 2.8 mm lens, warm light to 30 m, 120 dB WDR, built-in mic, IP67. White or black option available. 1 × Recorder NVR501-08B-P8-IQ — 8-channel 4K AI IQ NVR, 8 built-in PoE ports, 1 SATA bay (to 16 TB), 4K HDMI + VGA, AcuSearch/AcuTrack/SeekFree. 4 channels used, 4 spare. Power 8 × PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay — HDD not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Mounting Brackets and templates included for eave/soffit installs. For brick or flush-wall mounting, add a Uniview wall-mount bracket or junction box per camera for tidy cable management. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Uniview UNV Australian stock. Best For Homes & residential Full-colour night coverage of the front door, driveway, yard and side access on a single recorder. Retail shopfronts Colour identification at the till and entry, with clear footage across aisles and the stockroom. Offices & reception Colour ID at reception and entries, plus cover of corridors and back exits. NDAA / government sites Section 889-compliant cameras and recorder for government, education and enterprise projects. Warehouses & yards Colour on the loading dock and gate, with room to add 4 more cameras as the site grows. Small business A clean 4-camera full-colour system with AI search and 4 spare channels to scale up later. Camera — Uniview UNV IPC3626LE-ADF28K-WP (×4) Camera Type 6MP OwlView ColorHunter Fixed Eyeball Turret (Wise-ISP) Image Sensor 1/1.8″ progressive-scan CMOS Max. Resolution 6MP · 3072 × 2048 @ 25 fps Lens Fixed 2.8 mm @ F1.0 (wide field of view) Night Vision ColorHunter + Wise-ISP — true full colour · smart warm light up to 30 m Wide Dynamic Range 120 dB true WDR · 2D/3D DNR · BLC/HLC · Digital Defog Smart Analytics Human & vehicle detection · line crossing · intrusion Audio Built-in microphone Compression Ultra 265 / H.265 / H.264 / MJPEG · dual streams Edge Storage MicroSD up to 512 GB · ANR · NAS Power PoE (IEEE 802.3af) · max ~2.8 W Ingress Protection IP67 · 4 kV surge · −30 °C ~ 60 °C Compliance NDAA / Section 889 compliant Warranty (Australia) 3 years · CCTV Guru Australia Recorder — Uniview UNV NVR501-08B-P8-IQ Channels 8 IP channels (4 used, 4 spare) Built-in PoE 8 × RJ45 PoE — plug & play, IEEE 802.3at/af · 30 W per port, 75 W total Max. Recording Up to 16MP · Ultra 265 / H.265 / H.264 AI Search AcuSearch · AcuTrack · SeekFree · SmartSearch VCA (by IPC) Face Detection · SIP (Intrusion, Cross Line, Enter/Leave) · UMD · People Counting Video Output 1 × HDMI (4K) + 1 × VGA — simultaneous Storage 1 × SATA bay, up to 16 TB (HDD sold separately) Network / Remote 1 × RJ45 10/100M · ONVIF S/G/T · P2P cloud via UNV app & EZCloud ANR Supported — edge recording backfill on network drop Compliance NDAA Compliant · CE / FCC / UL / RoHS Warranty (Australia) 3 years · CCTV Guru Australia CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Installation Notes ›Camera placement: mount cameras 2.5–3 m high, angled down across entries, driveways and perimeters; keep warm-light LEDs clear of walls and eaves to avoid glare. ›Cabling & sealing: run solid-copper Cat6 to each camera and seal outdoor RJ-45 joins with a junction box or weatherproof tape against moisture and salt air. ›NVR & storage: fit a surveillance-grade HDD before first boot, and place the recorder in a cool, dust-free, ventilated spot away from direct sunlight for reliable 24/7 recording. Downloads & Resources IPC3626LE-ADF28K-WP Datasheet Uniview UNV Turret Quick Start Guide Uniview UNV Turret User Manual Do the cameras record in colour at night?Yes. These are OwlView ColorHunter cameras — the 1/1.8″ sensor, F1.0 lens and Wise-ISP deliver true full-colour video 24/7, with warm-light LEDs reaching up to 30 m in dark scenes. Is this kit NDAA compliant?Yes. Both the Uniview UNV ColorHunter cameras and the NVR501-08B-P8-IQ recorder are NDAA Section 889 compliant, making this kit suitable for government, education and security-sensitive sites in Australia. Does a hard drive come included?No — the NVR has one SATA bay but ships without storage. We recommend a surveillance-grade Seagate SkyHawk or WD Purple HDD. Use our storage calculator to size your drive for your preferred recording settings. How much recording time will I get?Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Use our storage calculator for an estimate based on your settings. How are the cameras powered?Each camera runs on a single Cat6 cable to one of the NVR's 8 built-in PoE ports — no separate power supplies or powerpoints at the camera. Can I add more cameras later?Yes. The NVR has 8 PoE ports and you're using 4, so you can add up to 4 more cameras by plugging them into the spare ports — no recorder upgrade needed. What is AcuSearch, AcuTrack and SeekFree?They're the recorder's -IQ AI review tools: AcuSearch filters footage by people and vehicles, AcuTrack follows a target across cameras, and SeekFree lets you search recordings by typing what you're after — so you find events in seconds. Can I view it remotely?Yes. Free P2P cloud access through the Uniview UNV app and EZCloud lets you watch live and recorded footage from your phone or computer anywhere. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua WizSense · 6 × 5MP Turret · SMD+ AI · 30 m IR · 8CH PoE AI NVR 6× 5MP WizSense Dahua 6 × 5MP WizSense AI CCTV Kit — 6 Turret Cameras + 8-Channel PoE AI NVR A complete, plug-and-play 6-camera 5MP system for homes, offices and small businesses. The 6 × DH-IPC-HDW2541EMP-AS-ANZ WizSense turrets use SMD+ AI to tell people and vehicles apart from animals, foliage and weather — so you're only alerted when it matters — with 30 m IR night vision and a built-in mic. The 8-channel PoE AI NVR powers and records every camera over a single Cat6 cable each, with 2 channels still free. Cameras 6 × 5MP Turret Recorder 8CH AI NVR · 8 PoE Resolution 5MP · 2880×1620 AI WizSense SMD+ Night Vision 30 m IR Weatherproof IP67 Rated WizSense SMD+ — Only Alerts That Matter Smart Motion Detection Plus classifies motion as human or vehicle and ignores animals, foliage, rain and passing headlights — so you get push notifications only when a real person or vehicle is detected. 5MP Detail 2880×1620 captures more detail than 1080p or 4MP — faces at the door, plates in the driveway and labels at the counter stay identifiable in recorded footage. Built-In Mic · 30 m IR Every camera has a built-in microphone for audio capture and clear 30 m infrared night vision with automatic day/night switching. 8-Channel PoE NVR Compact, fanless and silent, with 8 built-in PoE ports for plug-and-play install, 4K HDMI output and free DMSS remote viewing — with 2 channels still free. What's Included 6 × Cameras DH-IPC-HDW2541EMP-AS-ANZ — 5MP WizSense turret: SMD+ human/vehicle detection, 30 m IR, built-in mic, 120 dB WDR, MicroSD up to 256 GB, IP67. ANZ firmware. 1 × Recorder DHI-NVR4108HS-8P-AI/ANZ — 8-channel 4K WizSense AI NVR, 8 built-in PoE ports, 1 SATA bay, 4K HDMI, SMD 4.0, DMSS remote access. 6 channels used, 2 spare. Power 8 × PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay (HDD up to 10 TB) — not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Dahua ANZ stock. Best For Residential homes Cover front, back, drive, garage, side gate and yard with 2 ports spare for later. Shops & offices 5MP detail at the counter and entry; SMD+ cuts nuisance alerts during business hours. Warehouses & yards Perimeter Protection secures docks and boundaries; IP67 handles dust and moisture. Childcare & schools 5MP footage for incident review and duty-of-care; SMD+ reduces nuisance alerts. Airbnb & rentals Monitor entries and shared areas via DMSS; MicroSD edge backup if the NVR is tampered with. Trade & workshops Cover tools, vehicles and access points; built-in mic adds audio context. Camera — DH-IPC-HDW2541EMP-AS-ANZ (×6) Camera Type 5MP WizSense Fixed IR Turret Network Camera Image Sensor 1/2.7" CMOS Max. Resolution 5MP · 2880 × 1620 @ 20 fps Lens Fixed 2.8 mm Night Vision IR up to 30 m AI SMD+ · Perimeter Protection · Tripwire · Intrusion Audio Built-in microphone WDR / Compression 120 dB WDR · Smart H.265+ Edge Storage MicroSD up to 256 GB Power / Ingress PoE 802.3af · 12 VDC · IP67 · –30 °C to +60 °C Warranty (Australia) 3 years · CCTV Guru Australia Installation Notes ›Camera placement: position each camera to cover an entry or approach for the best SMD+ detection accuracy. ›Cabling & sealing: run solid-copper Cat6 (max 100 m per camera) and seal outdoor RJ-45 joins with a junction box or weatherproof tape. ›Audio: check local audio-recording laws before enabling the built-in microphones. Setup & Installation Guides — Official Dahua First-time NVR setup, step by step — Dahua Technology UK & Ireland How to add IP cameras to your NVR — Dahua Technology (official) Downloads & Resources DH-IPC-HDW2541EMP-AS-ANZ Datasheet Dahua Eyeball Network Camera Quick Start Guide Dahua Network Video Recorder User Manual What is WizSense SMD+?Smart Motion Detection Plus is Dahua's deep-learning AI that classifies motion as human or vehicle, filtering out animals, foliage and weather — so you only get alerted on what matters. Does a hard drive come included?No — the NVR has one SATA bay (up to 10 TB) but ships without storage. For 6 × 5MP on motion-only, ~2 TB gives roughly 2–3 weeks; choose 4 TB+ for continuous recording. Can I add more cameras later?Yes. The NVR has 8 PoE ports and you're using 6, so you can add up to 2 more cameras into the spare ports — no recorder upgrade needed. Is remote viewing included?Yes — the free DMSS app (iOS/Android) gives live view, playback and push alerts from anywhere via P2P. No static IP or port forwarding required. Are the cameras suitable for outdoors?Yes — all cameras are IP67 rated for outdoor installation in all Australian conditions, including coastal salt air and tropical rain. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 6-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode.

Read more less

Dahua WizSense · 12 × 5MP AI Starlight · 16CH 4K NVR 12 × 5MP Kit Dahua 12 × 5MP WizSense AI CCTV Kit with 16-Channel 4K NVR The Dahua 12-Camera 5MP AI CCTV Kit is a ready-to-install bundle for larger Australian homes, offices, warehouses, industrial yards and multi-tenant retail. It pairs twelve DH-IPC-HDW2541EMP-AS-ANZ 5MP WizSense AI Starlight turret cameras with a DHI-NVR4216-16P-AI/ANZ 16-channel 4K NVR. The kit ships without a hard drive — add the surveillance drive that suits your retention needs from the storage selector below. The NVR's 16 built-in PoE ports power and connect every camera over a single Cat6 run — and with 4 channels still free, you can scale to 16 cameras later without replacing the recorder. Cameras 12 × 5MP AI Starlight Recorder 16CH 4K NVR · 16 PoE Night Vision 30 m Smart IR + Starlight Storage Add HDD Below Audio Built-in Mic (one-way) Weatherproof IP67 Rated 5MP Starlight Low-Light Imaging A 1/2.7" Starlight sensor with 120 dB WDR captures clear, low-noise colour in very low light. In full darkness, Smart IR to 30 m takes over for crisp black-and-white footage. WizSense AI — SMD 4.0 Deep-learning Smart Motion Detection and perimeter protection classify people and vehicles, filtering out animals, foliage and shadows so only real events reach your phone. 16-Port PoE — Plug & Play One Cat6 cable per camera carries power and video back to the NVR's 16 built-in PoE ports — no separate power supplies, no extra PoE switch, commissioning in minutes. Room to Grow Dual SATA bays ready for the surveillance drive of your choice. Twelve cameras run today with 4 spare channels to scale to 16 later. What's Included 12 × Cameras DH-IPC-HDW2541EMP-AS-ANZ — 5MP WizSense AI Starlight turret, 2.8 mm (111° FOV), Smart IR 30 m, 120 dB WDR, built-in mic, IP67. Each ships with mounting bracket, drill template, screws & quick start guide. 1 × Recorder DHI-NVR4216-16P-AI/ANZ — 16-channel 4K WizSense NVR with 16 built-in PoE ports, dual SATA bays, 4K HDMI/VGA output and DMSS remote access. Storage Ships without a hard drive. Add a surveillance-grade Seagate SkyHawk or WD Purple drive from the storage selector below (2 SATA bays, up to 16 TB per bay / 32 TB total); we'd suggest a 6–12 TB drive for twelve cameras. Power 16 × PoE+ ports built into the NVR — one Cat6 network cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Mounting Brackets and templates included for eave/soffit installs. For brick or flush-wall mounting, add a Dahua wall-mount bracket per camera; a junction box is also available for tidy cable management. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Dahua ANZ stock. Best For Large residential estates Driveways, gates, fence lines and outdoor blind spots across multi-storey homes. Warehouses & distribution Loading docks, racking aisles, logistics offices, fire exits and equipment yards. Commercial offices Multiple floors, reception halls, lift lobbies, server rooms and basement parking. Supermarkets & retail Aisles, POS registers, stockrooms, high-theft corridors and entrance zones. Car parks & yards Person and vehicle AI detection with usable detail across large open areas. Industrial sites Wide perimeter coverage with IP67 weatherproof cameras for tough environments. Camera Specifications — DH-IPC-HDW2541EMP-AS-ANZ Camera Type 5MP WizSense AI Fixed-focal Eyeball Turret (Starlight) Image Sensor 1/2.7" Progressive Scan CMOS Max. Resolution 5MP · 2592 × 1944 Streams Main 5MP @ 20 fps / 4MP @ 25 fps · Sub D1 @ 25 fps Lens Fixed 2.8 mm · ~111° horizontal FOV Night Vision Smart IR up to 30 m · Starlight min. illumination 0.005 lux WDR True 120 dB hardware WDR AI Functions WizSense · SMD 4.0 · Perimeter Protection (human & vehicle) Audio Built-in microphone · G.711a / G.711mu / G.726 Compression Smart H.265+ / H.265 / Smart H.264+ / H.264 Power 12 VDC / PoE (IEEE 802.3af) · Max 6.1 W Ingress Protection IP67 · cast-aluminium housing Dimensions Ø121.9 × 99.1 mm · ~500 g Compliance RCM · CE-LVD · FCC Part 15 Subpart B Warranty (Australia) 3 years · CCTV Guru Australia Recorder Specifications — DHI-NVR4216-16P-AI/ANZ Channels 16 IP channels · up to 16 MP input Bandwidth 256 Mbps incoming / recording / outgoing PoE 16 × PoE+ ports · 130 W total · max 25.5 W per port Storage 2 × SATA III (up to 16 TB per bay) · no HDD included Video Output 1 × HDMI (4K) + 1 × VGA · simultaneous AI Functions Face detection, IVS/Perimeter, SMD Plus · Quick Pick target search Compression Smart H.265+ / H.265 / Smart H.264+ / H.264 Remote / App DMSS (iOS & Android) · P2P · ONVIF 21.12 Installation Notes ›Cabling: run solid-copper Cat6 from each camera back to the NVR's PoE ports for stable power and video over long distances. ›Weatherproofing: even at IP67, seal outdoor RJ-45 joins with weatherproof tape or a junction box to keep out moisture and salt air. ›Storage & NVR placement: for 12 cameras consider a 6–12 TB drive, and mount the recorder in a cool, dust-free, ventilated spot for reliable 24/7 recording. Setup & Installation Guides — Official Dahua First-time NVR setup, step by step — Dahua Technology UK & Ireland How to add an IP camera — Dahua Technology (official) Downloads & Resources DH-IPC-HDW2541EMP-AS-ANZ Datasheet DHI-NVR4216-16P-AI/ANZ Datasheet Dahua Camera Quick Start Guide Does this kit include a hard drive?No — the kit ships without a drive so you can size storage to your site. Add a surveillance-grade Seagate SkyHawk or WD Purple HDD from the storage selector below and we'll fit it before dispatch. Can I fit a larger hard drive later?Yes. The NVR has two SATA bays and supports up to 16 TB per bay (32 TB total), so you can add a second drive or upgrade for longer retention at any time. Are these official Australian-stock models?Yes. Every component is genuine Dahua ANZ stock with regional firmware and a local Australian warranty backed by CCTV Guru — not grey import. How are the cameras powered?Each camera runs on a single Cat6 cable to one of the NVR's 16 built-in PoE ports — no separate power supplies or powerpoints at the camera. Cat6 cabling is run on site and not included. Can I expand past 12 cameras?Yes. The NVR has 16 PoE ports, so you can add up to 4 more cameras simply by plugging them into the spare ports — no recorder upgrade needed. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Centralised 8-Channel Recording for TP-Link VIGI and ONVIF IP Camera SystemsThe TP-Link VIGI NVR1008H is a compact 8-channel network video recorder designed for small to medium IP security installations. Supporting 24/7 continuous recording at up to 5MP resolution with H.265+ compression, it stores up to 10TB of footage on a single SATA hard drive (not included) — keeping months of video accessible locally. Remote monitoring is available via the free VIGI app, and ONVIF compatibility ensures it works with cameras from TP-Link VIGI and other major brands.Key Features 8-Channel Live View — monitor up to 8 IP cameras simultaneously at up to 5MP resolution 24/7 Continuous Recording — automatically records and overwrites footage to ensure uninterrupted coverage Up to 10TB Storage — single SATA HDD bay supports drives up to 10TB (HDD not included) 4-Channel Simultaneous Playback — review footage from up to 4 cameras at the same time with variable playback speed H.265+ Compression — reduces file sizes by up to 50% compared to H.264, extending storage duration without sacrificing quality ONVIF Compatible — works with TP-Link VIGI cameras and third-party ONVIF-compliant IP cameras Remote Monitoring via VIGI App — view live footage, review recordings, and receive alerts from anywhere on iOS or Android Two-Way Audio — voice intercom support for compatible cameras with built-in microphone and speaker 80Mbps Video Access Bandwidth — supports up to eight 4MP cameras simultaneously based on TP-Link lab testing Typical Use Cases Small business CCTV systems with up to 8 IP cameras Retail, warehouse, or office security recording with local and remote access Home security installations requiring 24/7 continuous recording Upgrading from DVR/analogue systems to IP camera recording VIGI ecosystem deployments combining NVR, cameras, and PoE switches Technical Specifications Specification Detail Model VIGI NVR1008H Channels 8 Max Live View Resolution Up to 5MP (1-channel) Simultaneous Playback 4 channels Video Compression H.265+, H.265, H.264+, H.264 HDD Bays 1× SATA (up to 10TB, HDD not included) Video Access Bandwidth 80Mbps Network Interface 1× 10/100/1000Mbps RJ45 Video Output 1× HDMI, 1× VGA USB Ports 2× USB 2.0 Audio Two-way audio (via compatible cameras) Compatibility TP-Link VIGI cameras, ONVIF-compliant IP cameras Remote Access VIGI App (iOS and Android) Recording Modes Continuous, Motion Detection, Schedule Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the NVR1008H come with a hard drive? No. The VIGI NVR1008H does not include a hard drive. You will need to install a compatible 3.5-inch SATA HDD (up to 10TB) before the unit can record footage. We recommend using a surveillance-grade HDD such as a Western Digital Purple or Seagate SkyHawk for 24/7 operation. How many cameras can I connect? The NVR1008H supports up to 8 IP cameras. Based on TP-Link lab testing, it can handle up to eight 4MP cameras simultaneously within its 80Mbps video access bandwidth. Does it work with non-TP-Link cameras? Yes. The NVR1008H is ONVIF-compliant, meaning it is compatible with IP cameras from other brands that support the ONVIF protocol. For full feature integration including smart detection and the VIGI app, TP-Link VIGI cameras are recommended. How long will footage be stored? Storage duration depends on the number of cameras, resolution, and recording mode. Based on TP-Link testing with a 3MP VIGI camera and a 10TB HDD, approximately 720 days of footage can be stored. Higher resolution cameras or continuous recording will reduce this figure. Can I access footage remotely? Yes. The free VIGI app (iOS and Android) allows you to view live footage, play back recordings, and receive motion detection alerts from anywhere with an internet connection.

Read more less

WizSense AI · Penta-brid · 4-Channel The Dahua DH-XVR5104HS-I3-S3 is a 4-channel Penta-brid HDCVI recorder that handles five video signals on one box — HDCVI, AHD, TVI, CVBS analog, plus IP. Drop it in to replace an old DVR using the existing coax runs, or expand it later by converting analog channels to IP for up to 6 IP cameras at 6 MP. It records at up to 5 MP HDCVI per channel, supports Smart H.265+ for roughly half the storage of H.264, and ships with Dahua's WizSense AI chip for deep-learning human and vehicle filtering. Designed for small retail, workshops, residences and offices, the XVR5104HS-I3-S3 fits a compact 1U desktop chassis with one SATA bay (up to 16 TB), HDMI + VGA simultaneous outputs, and free remote viewing through the DMSS mobile app. Backed by a 3-year warranty and Australian tech support from CCTV Guru. Penta-brid — five signal types, one recorder Signal Types HDCVI · AHD · TVI · CVBS · IP Channel Capacity 4 Analog BNC + up to 6 IP 4 analog BNC inputs Auto-detect HDCVI, AHD, TVI and CVBS signals on every channel. Plug in any mix — the XVR figures out the format for you. + up to 6 IP cameras Two IP channels by default, plus four more when analog channels are converted to IP. Mix and match analog and IP up to six cameras total. 5 MP HDCVI recording Full 5 MP @ 25 fps on HDCVI, 4 MP @ 30 fps, or 1080p @ 30 fps — far sharper than legacy 720p / 960H DVRs using the same coax cable. Coaxial audio on all 4 channels Carries audio over the same BNC coax — no extra audio cable, no extra RCA runs. Rare at this price point. WizSense AI — deep-learning detection, fewer false alarms Dedicated AI Chip Independent deep-learning processor Targeted Alerts Filters out leaves, rain, shadows & lighting SMD Plus on all 4 channels Smart Motion Detection Plus runs a second AI pass on every motion event, classifying targets as person or vehicle and discarding false alarms from weather and lighting. Perimeter Protection Up to 4 channels of tripwire and intrusion analytics (10 IVS rules per channel) with human/vehicle secondary recognition to suppress nuisance triggers. Face Detection & Recognition One channel of face detection (up to 8 face snapshots/sec) and one channel of face recognition with up to 10 face databases and 10,000 stored images. QuickPick 2.0 search Find similar targets across recorded footage in seconds — paste a person or vehicle still and QuickPick scans the timeline for matches. AI Video Quality analytics Continuously checks all 4 channels for brightness, colour cast, defocus, overexposure and contrast issues — alerts you the moment a camera drifts out of spec. AI Coding (Smart H.265+) Smart H.265+ encoding cuts storage and bandwidth by up to 50% versus H.264 by lowering the bitrate on static background pixels and keeping detail on moving targets. See WizSense in action Dahua AI XVR — Full Channel SMD Plus demo WizSense 101 — Dahua's deep-learning AI explained Built for installers, simple for end-users 1 SATA bay · up to 16 TB Drop in one surveillance-grade HDD (WD Purple or Seagate SkyHawk recommended) for weeks of continuous 5 MP recording. HDMI + VGA simultaneous Drive a wall-mounted spot monitor on HDMI while the on-site PC stays on VGA — both run independently at up to 1080p. Two-way audio 1× RCA audio in (shared with Ch. 1) and 1× RCA audio out, plus 4-channel coaxial audio over the BNC inputs for talk-back at the gate or counter. DMSS mobile app Free iOS and Android viewing app — live view, playback, push notifications and P2P remote access without a static IP or port forwarding. ONVIF 24.06 (T/S/G) Integrates with third-party IP cameras and VMS platforms — Panasonic, Sony, Hanwha, Axis, Arecont and any ONVIF-compliant device. Compact 1U desktop 260 × 237.8 × 47.6 mm, just 0.84 kg — sits neatly on a shelf, in a cabinet or under a desk. 12 VDC PSU included. Full Specifications Model DH-XVR5104HS-I3-S3 Series WizSense · 5MP Value / 1080p · Penta-brid Analog channels 4 × BNC — HDCVI / AHD / TVI / CVBS auto-detect IP channels Up to 6 (2 by default + 4 from converted analog) · up to 6 MP each Max HDCVI resolution 5 MP @ 25 fps · 4 MP @ 30 fps · 1080p @ 30 fps Max TVI / AHD 5 MP @ 20 fps · 4 MP @ 30 fps · 1080p @ 30 fps Bandwidth 32 Mbps incoming / 32 Mbps record / 32 Mbps outgoing Video compression AI Coding · Smart H.265+ / H.265 · Smart H.264+ / H.264 Audio compression G.711a · G.711u · PCM AI engine WizSense (independent AI chip, deep-learning) SMD Plus 4 channels (human / vehicle classification) Perimeter Protection General Mode: 4 ch · Advanced Mode: 2 ch · 10 IVS rules per channel Face Detection 1 channel · up to 8 face images/sec Face Recognition 1 channel · 10 face databases · 10,000 images total · 6 attributes QuickPick 2.0 1 channel (similar-target search) AI Video Quality Analytics 4 channels (brightness, focus, exposure, contrast, colour cast) HDD bays 1 × SATA · up to 16 TB Video output 1 × HDMI + 1 × VGA · simultaneous · max 1920 × 1080 Multi-screen display 1 / 4 (1 / 4 / 6 with IP extension) Audio I/O 1 × RCA in (shared with Ch. 1) · 1 × RCA out · 4-ch coaxial audio over BNC Two-way talk Yes · shares Ch. 1 audio input USB 2 × USB 2.0 (1 front · 1 rear) Network 1 × RJ-45 10 / 100 Mbps Ethernet Protocols TCP/IP · IPv4 · IPv6 · HTTP / HTTPS · RTSP · UDP · NTP · DHCP · DNS · SMTP · UPnP · IP Filter · FTP · DDNS · SNMP · Alarm Server · P2P · ONVIF 24.06 (Profile T / S / G) Third-party support Panasonic · Sony · Hanwha · Axis · Arecont · ONVIF Record modes General · alarm · motion detection · intelligent · POS Backup USB device · network Mobile app DMSS (iOS / Android) RS-485 1 port Power supply 12 VDC · 1.5 A (adaptor included) Power consumption < 5 W (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 90% RH (non-condensing) Dimensions 260.0 × 237.8 × 47.6 mm (Compact 1U) Net weight 0.84 kg Certifications CE-LVD · CE-EMC Warranty 3 years (CCTV Guru Australia) Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DH-XVR5104HS-I3-S3 Datasheet Dahua XVR Quick Start Guide Dahua XVR User Manual Compact & Mini HDD Installation Guide DMSS Mobile App (iOS / Android) Frequently asked questions Will this XVR work with my old analog CCTV cameras? Yes. Penta-brid means every BNC input auto-detects HDCVI, AHD, TVI and CVBS — so any analog camera using one of those four standards plugs straight in. You don't need to know which format your cameras use; the XVR figures it out. Can I add IP cameras to it? Yes — 2 IP channels are available by default, and up to 4 more analog channels can be converted to IP, for a maximum of 6 IP cameras at up to 6 MP each. Note: when IP extension is enabled, the WizSense AI functions are not available on those converted channels. Does it power my cameras (PoE)? No. The XVR5104HS-I3-S3 is a HDCVI recorder, not a PoE NVR — your analog and IP cameras each need their own 12 VDC power supply or PoE injector. For a PoE-powered solution, look at the Dahua WizSense NVR4108-P-AI/H series. What hard drive should I use? Use a surveillance-rated SATA HDD — Western Digital Purple or Seagate SkyHawk up to 16 TB. Standard desktop drives are not rated for 24/7 recording and will fail prematurely. CCTV Guru stocks compatible drives if you need one bundled. How do I view it remotely on my phone? Install the free DMSS app on iOS or Android, scan the QR code on the XVR's local menu, and you'll have live view, playback, push notifications and two-way audio without configuring port forwarding or a static IP. Does it run hot enough to need a fan or rack? No — under 5 W idle (without HDD) and a compact 1U desktop chassis. It runs cool on a shelf or in a cabinet. Operating range is −10 °C to +55 °C. Is the 3-year warranty backed locally? Yes — CCTV Guru honours a 3-year warranty in Australia, with local tech support and replacement stock held in Sydney. No overseas RMAs, no shipping back to the manufacturer. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

8-Channel DVR · Hikvision AcuSense · 4K Turbo HD · AI Perimeter Detection · HDTVI + IP Hikvision iDS-7208HUHI-M2/S — 8 Channel AcuSense 4K Turbo HD DVR The Hikvision iDS-7208HUHI-M2/S is Hikvision's flagship 8-channel AcuSense DVR for Australian installers and integrators who demand AI-powered false alarm reduction, 4K recording, and maximum camera flexibility in a compact 1U chassis. As a true Turbo HD DVR, it accepts HDTVI, AHD, HDCVI, CVBS, and IP cameras on the same unit — protecting your existing coaxial cable investment while giving you a clear upgrade path to full IP. Powered by Hikvision's AcuSense deep learning engine, the iDS-7208HUHI-M2/S delivers human and vehicle classification across all analogue channels — dramatically reducing false alarms from animals, foliage, and environmental noise. Combined with 4K recording, H.265+ compression, and dual HDD bays, this is the recorder that outperforms everything else at its price point. HDD not included — add a surveillance-grade drive at checkout. Channels 8 Analogue + 2 IP Max Resolution 4K (8MP) AI AcuSense · Human & Vehicle Inputs HDTVI / AHD / HDCVI / IP Compression H.265+ / H.265 Storage 2 × HDD Bays (No HDD) Australian Stock · Fast Dispatch Hikvision Manufacturer Warranty Expert Australian Tech Support Key Features AcuSense AI — Human & Vehicle Classification Hikvision's AcuSense deep learning engine classifies motion events as human or vehicle — filtering out animals, foliage, rain, and other false triggers. Only real threats generate alerts. Dramatically reduces alarm fatigue for operators and end users alike. 4K Recording (8MP) Records analogue channels at up to 4K resolution via HDTVI, and IP channels at up to 8MP. Capture faces, licence plates, and fine detail with confidence — even on wide-angle shots covering large areas. Perimeter Protection — Line Crossing & Intrusion Detection Define virtual tripwires and intrusion zones on analogue channels. The DVR triggers alerts only when a classified human or vehicle crosses the boundary — not every time a leaf blows past or a cat walks through frame. Turbo HD — 5-in-1 Camera Compatibility Accepts HDTVI, AHD, HDCVI, CVBS analogue cameras and IP cameras simultaneously. Reuse existing coaxial cable infrastructure while adding IP cameras on the same DVR. No rip-and-replace required. Dual HDD Bays — Up to 16TB Total Two 3.5" SATA HDD bays support up to 8TB per drive (16TB total) — double the storage capacity of single-bay recorders. Longer retention periods without compromising resolution or frame rate. H.265+ Compression H.265+ dual-stream compression reduces storage consumption by up to 75% versus H.264 — meaning your HDDs last longer and your bandwidth stays manageable across remote monitoring connections. Smart Search & Quick Playback Search recorded footage by human or vehicle events rather than scrubbing through hours of continuous recording. Find the clip you need in seconds — critical for incident investigation and insurance claims. Remote Access via Hik-Connect & iVMS-4200 Monitor live and recorded footage from anywhere via the Hik-Connect mobile app (iOS & Android) or iVMS-4200 desktop client. P2P connection — no static IP or port forwarding required. Recommended For Analogue Camera Upgrades Already have coaxial cable runs? Keep them. The iDS-7208HUHI-M2/S connects your existing HDTVI, AHD, or HDCVI cameras while letting you add IP cameras on the same DVR — a cost-effective upgrade path to AcuSense AI. Small Retail & Convenience Stores 8 channels covers entry, POS counter, stockroom, and car park. AcuSense filters out false alarms from foot traffic — only genuine human intrusion events trigger notifications after hours. Warehouses & Industrial Sites Perimeter Protection secures loading docks and yard boundaries. Dual HDD bays provide extended retention for large sites with high camera activity. Small Offices & Commercial Premises Compact 1U chassis fits in a server rack or comms cabinet. Remote access via Hik-Connect keeps management informed without on-site visits. Residential Homes 8 channels covers every entry point, garage, and outdoor area. AcuSense eliminates nuisance alerts from pets and passing cars. Hik-Connect app provides instant mobile push notifications. Schools & Childcare Centres AI-powered human detection reduces nuisance alerts in busy environments. Smart Search speeds up incident review for duty-of-care compliance. Add a Surveillance HDD HDD Not Included — Choose Your Capacity The iDS-7208HUHI-M2/S has 2 × 3.5" SATA HDD bays supporting up to 8TB per drive (16TB total). We recommend a WD Purple Pro or Seagate SkyHawk AI surveillance-grade drive — purpose-built for 24/7 AI DVR workloads. Contact our team for a retention calculation based on your camera count, resolution, and recording schedule. CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Technical Specifications Video Input 8 × BNC (HDTVI / AHD / HDCVI / CVBS) · Up to 2 additional IP camera channels · Max 8MP per IP channel Max Recording Resolution 4K (3840 × 2160) via HDTVI · 8MP via IP Compression H.265+ / H.265 / H.264+ / H.264 dual-stream · AcuSense AI coding AI Features AcuSense human & vehicle classification · Perimeter Protection (line crossing + intrusion) · Smart Search by event type Bandwidth & Storage Incoming bandwidth: up to 200 Mbps · 2 × SATA HDD bays (up to 8TB each) · HDD not included Network & Remote Access TCP/IP · P2P · Hik-Connect app (iOS & Android) · iVMS-4200 desktop · ONVIF · 1 × RJ45 10/100/1000M Video Output 1 × HDMI (4K) · 1 × VGA · Simultaneous output supported Form Factor & Power Compact 1U chassis · 100–240V AC · Operating temp: -10°C to +55°C More Information Datasheet Quick Start Guide Frequently Asked Questions Does the DVR include an HDD?No — an HDD is not included. Add a WD Purple Pro or Seagate SkyHawk AI surveillance-grade drive at checkout. Contact us for a sizing recommendation based on your camera count and recording schedule. Can I connect IP cameras to this DVR?Yes — the iDS-7208HUHI-M2/S supports up to 2 additional IP camera channels at up to 8MP each, in addition to the 8 BNC analogue inputs. What analogue camera types are supported?HDTVI, AHD, HDCVI, and CVBS (standard definition) cameras are all supported on the BNC inputs — mix and match as needed. What is AcuSense?AcuSense is Hikvision's deep learning AI that classifies motion events as human or vehicle, filtering out animals, foliage, and environmental noise. It dramatically reduces false alarms and makes footage search faster. Can I view footage remotely?Yes — the Hik-Connect app (iOS & Android) and iVMS-4200 desktop client provide remote access via P2P. No static IP or port forwarding required. How many HDD bays does it have?Two 3.5" SATA HDD bays, each supporting drives up to 8TB (16TB total capacity). Does it support 4K recording?Yes — up to 4K (3840 × 2160) via HDTVI cameras, and up to 8MP via IP cameras. What is the difference between iDS and DS series DVRs?The iDS prefix indicates AcuSense AI capability — human and vehicle classification on analogue channels. DS series DVRs use standard motion detection without AI classification. Is it compatible with Hikvision AcuSense cameras?Yes — pairing with Hikvision AcuSense HDTVI cameras maximises AI performance. The DVR also works with non-AcuSense cameras using its own onboard AI processing. What's the warranty?Hikvision manufacturer warranty, supported locally by CCTV Guru's Australian technical team. Do you ship Australia-wide?Yes — fast dispatch to every state and territory from Australian stock. Order the Hikvision iDS-7208HUHI-M2/S from CCTV Guru CCTV Guru is an authorised Australian distributor of Hikvision surveillance products. Order the Hikvision iDS-7208HUHI-M2/S 8-Channel AcuSense 4K Turbo HD DVR today for fast Australia-wide dispatch, expert pre-sales advice on HDD sizing and camera compatibility, and full local warranty support. Contact our Australian team to add surveillance HDDs, compatible Hikvision AcuSense cameras, or build a complete Turbo HD system package. Looking for a PoE NVR instead? View our Hikvision NVR range →

Read more less

WizSense + AcuPick · 5-Series · 32-Channel · 4-HDD · 1.5U32CH AcuPick NVR The Dahua DHI-NVR5432-AI/ANZ is a 32-channel 5-Series WizSense AI NVR with AcuPick on all 32 channels, four SATA bays, dual Gigabit NICs, dual HDMI + dual VGA outputs, and a 1.5U rack chassis built for enterprise-scale installs. Record up to 32 MP per channel, scale storage to roughly 80 TB on-board (plus eSATA and iSCSI expansion), and split the live wall across up to 36 channels on the main monitor. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's a headend NVR with no built-in PoE — connect your cameras through an external PoE switch (or a dedicated PoE injector chain) and use the recorder for AI, storage and the control-room wall. Shipped with regional firmware, an internal 100–240 VAC universal PSU and a local 3-year warranty backed by CCTV Guru in Sydney. AcuPick on all 32 channels — enterprise-scale search AcuPick Channels Up to 32 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans all 32 channels for matches across hours or days — clothing colour, body shape, vehicle make / model / colour / direction included. Front- + back-end intelligence Camera-side AI extracts target attributes during recording; NVR-side AI runs the comparison. Higher accuracy than recorder-only search and orders of magnitude faster than human review. Investigations finish in minutes Find a suspect across 32 cameras and three weeks of footage in a single search. Particularly valuable for police investigations, insurance disputes, and post-incident review. Beyond Quick Pick AcuPick is the next generation of Dahua's Quick Pick — more attributes, more accuracy, and supports both people and vehicles natively. Exclusive to the 5-Series NVR family. 5-Series WizSense AI — depth at scale Industrial AI Chip Full 5-Series feature set at 32-ch Face Database 20 databases · 20,000 images Face Recognition (16-ch image stream) 16 channels of camera-side face detection feeding NVR-side recognition at 16 face snapshots/sec — ideal for entry / exit and high-footfall installs. Twenty face databases, 20,000 images, full attribute filtering. Perimeter Protection (4 ch by NVR) 4 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each), plus all-channel perimeter via camera-side processing — every camera benefits from human/vehicle classification. SMD Plus (8 ch by NVR) 8 NVR-side SMD Plus channels plus all-channel camera-side SMD — deep-learning second-pass classification on every camera, cutting false alarms across the entire site. ANPR by camera (all channels) Pair with Dahua ANPR cameras for full 32-channel licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Carpark, fleet yard, gate management, even multi-site ANPR. Video Metadata search 8 channels of camera-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for sites where downtime isn't an option. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 32 MP recording · dual HDMI · ~80 TB on-board storage Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 6 MP, 5 MP and 4 MP IP cameras from any ONVIF brand. 2× HDMI + 2× VGA outputs Two independent HDMI heads (each up to 4K) with two mirrored VGAs — drive a multi-monitor control room with independent layouts on each screen. Heterogeneous video routing on HDMI1/HDMI2. 36-channel split on main screen Main monitor supports 1 / 4 / 8 / 9 / 16 / 25 / 36-split layouts (sub monitor up to 16). Drive a wall of thumbnails or zoom on critical channels. 4 SATA bays · up to 80 TB Four surveillance-grade HDDs (WD Purple, Seagate SkyHawk) up to 20 TB each — months of 32-channel recording without touching network storage. eSATA + iSCSI expansion External SATA archive port plus iSCSI network-storage support — scale beyond 80 TB without rebuilding the recorder. RAID-style protection via disk groups. 32-channel 1080p decoding Decode 32 1080p tiles simultaneously for the live wall, or mix and match — 8 × 8 MP, 4 × 16 MP, 2 × 32 MP, or 24 × 1080p with AI on. Enterprise I/O — dual NIC, 16 alarm-in, 12V output Dual Gigabit NICs Two independent RJ-45 Gigabit ports with multi-address, load-balance and fault-tolerance bonding modes — segregate camera VLAN from management VLAN, or run an active-passive failover link. 16 alarm-in / 6 alarm-out Physical terminal block for 16 alarm inputs and 6 alarm outputs — one of the outputs is a 12 V 1 A direct power feed for sirens, strobes or gate solenoids. RS-232 + RS-485 Both serial standards present — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. RS-485 is half-duplex. 3 × USB (1 × 2.0 + 2 × 3.0) One front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. ONVIF 23.12 (T / S / G) Latest ONVIF profile support — drops into any current VMS, plus native integration for Panasonic, Sony, Axis, Pelco, Arecont, Canon and Hanwha as well as Dahua. DMSS + DSS Pro VMS Free DMSS mobile app for live view, playback and push notifications. For multi-site enterprise deployments, integrate with Dahua DSS Pro for centralised control of multiple 5432 NVRs. NVR5432 vs the family — where it sits The 5432 is the enterprise headend in our Dahua range — twice the channel count of the 5216, twice the HDD bays, twice the network ports, and the only model with a 36-channel split and a 12 V alarm-output feed. The trade-off is the absence of built-in PoE: cameras must be powered through an external switch. Choose the 5216 instead if you want PoE built into the recorder; choose the 5432 (this model) when you're running more than 16 cameras through an existing managed network. 5-Series Tier Comparison Specification NVR5432-AI/ANZ (this model) NVR5216-16P-AI/ANZ NVR5208-8P-AI/ANZ IP channels 32 16 8 AcuPick channels Up to 32 Up to 16 Up to 8 Max camera resolution 32 MP 32 MP 32 MP Bandwidth (AI off / on) 384 / 200 Mbps 384 / 200 Mbps 384 / 200 Mbps Built-in PoE None (external switch) 16 ports · ports 1-8 ePoE 8 ports · all ePoE HDD bays 4 SATA · up to 80 TB 2 SATA · up to 32 TB 2 SATA · up to 32 TB eSATA · iSCSI Yes / Yes No / Yes No / Yes Network ports 2 × Gigabit (bondable) 1 × Gigabit 1 × Gigabit Video outputs 2 × HDMI + 2 × VGA 1 × HDMI + 1 × VGA 1 × HDMI + 1 × VGA Main-screen split Up to 36 Up to 16 Up to 9 Alarm I/O 16 in / 6 out (incl. 12 V) 4 in / 2 out 4 in / 2 out USB ports 1 × 2.0 + 2 × 3.0 1 × 2.0 + 1 × 3.0 1 × 2.0 + 1 × 3.0 Form factor 1.5U · 4.74 kg 1U · 2.66 kg 1U · 2.57 kg ONVIF 23.12 (T / S / G) 22.06 (T / S / G) 22.06 (T / S / G) N+M cluster Yes Yes Yes Warranty (Australia) 3 years 3 years 3 years Full Specifications Model DHI-NVR5432-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor 1.5U · 4-HDD · rack or desktop · NO built-in PoE IP channels 32 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 6 MP · 5 MP · 4 MP · 3 MP · 1080p · 720p · 960p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 25 fps · 4 × 16 MP @ 30 fps · 8 × 8 MP @ 30 fps · 16 × 4 MP @ 30 fps · 32 × 1080p @ 30 fps Decoding (AI on) 1 × 32 MP @ 25 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 6 × 8 MP @ 30 fps · 24 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 32 channels · 1 combined event per channel/sec Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 16 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · all channels by camera (16 targets/sec) · 10 IVS rules per channel SMD Plus 8 channels by NVR · all channels by camera (32 targets/sec) Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) All channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 4 × SATA · up to 20 TB per drive (~80 TB max) Video output 2 × HDMI (4K · 3840×2160) + 2 × VGA (1080p) · heterogeneous HDMI1/HDMI2 · simultaneous VGA1+HDMI1 / VGA2+HDMI2 Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 · Sub screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 6 × alarm out (1 × 12 V 1 A power output) USB 3 ports: 1 × front USB 2.0 + 2 × rear USB 3.0 Network ports 2 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) · multi-address / load-balance / fault-tolerance bonding PoE None (use external PoE switch) RS-232 / RS-485 1 / 1 (RS-485 half-duplex) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4 · UDP · NTP · DHCP · DNS · SMTP · UPnP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF 23.12 (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Hanwha Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 50 – 60 Hz (internal universal-voltage PSU) Power consumption ≤ 13 W NVR-side (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH (non-condensing) Dimensions 440 × 415.1 × 70 mm (1.5U) Net weight 4.74 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5432-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua NVR HDD Installation Guide Frequently asked questions Why doesn't the NVR5432 have built-in PoE? The 5432 is a headend NVR designed for sites that already run a managed network. Cameras connect through an external PoE switch (Dahua's own PoE switches, or any IEEE 802.3af/at managed switch). This gives you VLAN segregation, redundant network paths and far better scaling than fixed 16-port PoE NVRs. If you'd prefer all-in-one with PoE built into the recorder, choose the 5216-16P-AI/ANZ instead. How big a PoE switch do I need for 32 cameras? Allow about 7-15 W per camera for most Dahua WizSense bullets/turrets, more for active-deterrence units and PTZs. A 24-port PoE+ switch with 370–500 W of budget will run 32 typical cameras comfortably; a 48-port managed PoE+ switch is more headroom and gives spare ports for VoIP, APs and APs. CCTV Guru can quote a complete switch + NVR bundle. What is AcuPick and what do I need for it? AcuPick is Dahua's next-generation attribute-and-image search — it extracts rich target attributes (clothing, body shape, vehicle make/model/colour/plate, direction) at the camera AND the NVR, then lets you search across all 32 channels by reference image or combined attributes. You need Dahua's AcuPick-ready cameras (typically TiOC PV and 5-Series WizSense Plus IPC families). Standard WizSense cameras still record and recognise faces but the full AcuPick depth requires paired AcuPick IPCs. What's the dual NIC for? Two independent Gigabit RJ-45 ports — use them for VLAN segregation (camera VLAN on NIC1, management/uplink VLAN on NIC2), or bond them for active-passive failover (NIC2 takes over if NIC1's switch port dies), or load-balance for combined throughput. Configured from the local GUI or web interface. How much storage do I need for 32 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can it be rack-mounted? Yes — 1.5U / 440 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). It can also sit on a desk or shelf if you've allocated cabinet space. At 4.74 kg empty (without HDDs), plan for around 7-8 kg fully loaded with four drives. What's the 12 V alarm output for? One of the 6 alarm outputs is a direct 12 V 1 A power feed — drive a siren, strobe light or electric strike directly without needing an external relay or power supply. The other 5 outputs are dry-contact relays you can wire to anything that takes a NO/NC trigger. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

WizSense + AcuPick · 5-Series · 64-Channel · 4-HDD · 1.5U64CH AcuPick NVR The Dahua DHI-NVR5464-AI/ANZ is a 64-channel 5-Series WizSense AI NVR with AcuPick, four SATA bays, dual Gigabit NICs, dual HDMI + dual VGA outputs, and a 1.5U rack chassis built for enterprise-scale installs. Record up to 32 MP per channel, run AcuPick across up to 32 channels, drive a 64-channel split on the main monitor, and scale storage to roughly 64 TB across the four 16 TB drives. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's a headend NVR with no built-in PoE — cameras connect through an external PoE switch or your existing managed network. Internal 100–240 VAC universal PSU, AS/NZS-compliant kettle cord, and a local 3-year warranty backed by CCTV Guru in Sydney. Designed for multi-site retail chains, transport hubs, large carparks, hospitals and any campus running 30–60+ cameras through a structured network. AcuPick, N+M cluster and iSCSI are enabled by Dahua's V5 firmware (current factory ship as of 2025). AcuPick on up to 32 channels — enterprise-scale search AcuPick Channels Up to 32 ch · 1 event / channel / sec Search Method Image + attribute · front + back AI Search by reference image Click any person or vehicle in recorded video, hit AcuPick, and the NVR scans the active 32 channels for matches across hours or days — clothing colour, body shape, vehicle make / model / colour / direction included. Front- + back-end intelligence Camera-side AI extracts target attributes during recording; NVR-side AI runs the comparison. Higher accuracy than recorder-only search and orders of magnitude faster than human review. Investigations finish in minutes Find a suspect across the AcuPick-active channels and weeks of footage in a single search. Particularly valuable for police investigations, insurance disputes, and post-incident review. ANPR + SMD Plus on all 64 While AcuPick covers up to 32 channels, ANPR by camera, SMD Plus by camera and perimeter protection by camera all scale across every connected camera up to 64 — site-wide intelligence with no channel left behind. 5-Series WizSense AI — depth at scale Industrial AI Chip Same chip as the flagship 32-ch siblings Face Database 20 databases · 20,000 images Face Recognition (16-ch image stream) 16 channels of camera-side face detection feeding NVR-side recognition at 16 face snapshots/sec — ideal for entry / exit and high-footfall installs. Twenty face databases, 20,000 images, full attribute filtering. Perimeter Protection (4 ch by NVR) 4 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each), plus all-channel perimeter via camera-side processing — every camera benefits from human/vehicle classification. SMD Plus (8 ch by NVR) 8 NVR-side SMD Plus channels plus all-channel camera-side SMD — deep-learning second-pass classification on every camera, cutting false alarms across the entire site. ANPR by camera (all channels) Pair with Dahua ANPR cameras for full 64-channel licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Carpark, fleet yard, gate management, even multi-site ANPR. Video Metadata search 8 channels of camera-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear and more. N+M cluster failover Pair multiple 5-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for sites where downtime isn't an option. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR 64-channel recording · dual HDMI · 64 TB on-board storage Up to 32 MP per channel True 8K-class input — supports Dahua's highest-resolution cameras, plus 24 MP, 16 MP, 12 MP, 8 MP (4K), 5 MP and 4 MP IP cameras from any ONVIF brand. All 64 channels share the 384 Mbps recording bandwidth. 2× HDMI + 2× VGA outputs Two independent HDMI heads (each up to 4K) with two mirrored VGAs — drive a multi-monitor control room with independent layouts on each screen. Heterogeneous video routing on HDMI1/HDMI2. 64-channel split on main screen Main monitor supports 1 / 4 / 8 / 9 / 16 / 25 / 36 / 64-split layouts (sub monitor up to 16). Watch the entire site at a glance — every camera on one screen. 4 SATA bays · up to 64 TB Four surveillance-grade HDDs (WD Purple, Seagate SkyHawk) up to 16 TB each — weeks of 64-channel recording without touching network storage. eSATA + iSCSI expansion External SATA archive port plus iSCSI network-storage support — scale beyond 64 TB without rebuilding the recorder. Disk-group protection across the four on-board drives. Smart H.265+ for half the storage AI-tuned H.265+ encoding cuts bitrate on static background pixels while preserving detail on moving targets — roughly half the storage and bandwidth of standard H.264. Critical at 64-channel scale. Enterprise I/O — dual NIC, 16 alarm-in, 12V output Dual Gigabit NICs Two independent RJ-45 Gigabit ports with multi-address, load-balance and fault-tolerance bonding modes — segregate camera VLAN from management VLAN, or run an active-passive failover link. 16 alarm-in / 6 alarm-out Physical terminal block for 16 alarm inputs and 6 alarm outputs — one of the outputs is a 12 V 1 A direct power feed for sirens, strobes or gate solenoids. RS-232 + RS-485 Both serial standards present — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. RS-485 is half-duplex. 3 × USB (1 × 2.0 + 2 × 3.0) One front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. ONVIF 23.12 (T / S / G) Latest ONVIF profile support on V5 firmware — drops into any current VMS, plus native integration for Panasonic, Sony, Axis, Pelco, Arecont, Canon and Hanwha as well as Dahua. DMSS + DSS Pro VMS Free DMSS mobile app for live view, playback and push notifications. For multi-site enterprise deployments, integrate with Dahua DSS Pro for centralised control of multiple 5464 NVRs across sites. NVR5464 vs the family — how it compares The 5464 (this model) sits at the top of the 5-Series AI/ANZ NVR range — twice the IP channel count of the 5432, with the same chassis, AI horsepower and storage capacity. Choose this when you have between 32 and 64 cameras connected via a structured PoE switch network. For 16–32 cameras on the same chassis, step down to the 5432; if you want built-in PoE for the first 16 cameras, choose the 5432-16P. 5-Series Top-Tier Comparison Specification NVR5464-AI/ANZ (this model) NVR5432-AI/ANZ NVR5432-16P-AI/ANZ IP channels (licence) 64 32 32 AcuPick channels Up to 32 Up to 32 Up to 32 Main-screen split Up to 64 Up to 36 Up to 36 Max camera resolution 32 MP 32 MP 32 MP Bandwidth (AI off / on) 384 / 200 Mbps 384 / 200 Mbps 384 / 200 Mbps Built-in PoE None (external switch) None (external switch) 16 × ports · 150 W · 1-8 ePoE HDD bays 4 SATA · up to 64 TB 4 SATA · up to 64 TB 4 SATA · up to 64 TB eSATA · iSCSI Yes / Yes Yes / Yes Yes / Yes Network ports 2 × Gigabit (bondable) 2 × Gigabit (bondable) 2 × Gigabit (bondable) Video outputs 2 × HDMI + 2 × VGA 2 × HDMI + 2 × VGA 2 × HDMI + 2 × VGA Alarm I/O 16 in / 6 out (incl. 12 V) 16 in / 6 out (incl. 12 V) 16 in / 6 out (incl. 12 V) USB ports 1 × 2.0 + 2 × 3.0 1 × 2.0 + 2 × 3.0 1 × 2.0 + 2 × 3.0 Form factor 1.5U 1.5U 1.5U ONVIF (V5 firmware) 23.12 (T / S / G) 23.12 (T / S / G) 23.12 (T / S / G) N+M cluster · Warranty Yes / 3 years Yes / 3 years Yes / 3 years Full Specifications Model DHI-NVR5464-AI/ANZ Series WizSense · NVR5000-AI/ANZ (Australia / NZ market) Form factor 1.5U · 4-HDD · rack or desktop · NO built-in PoE IP channels 64 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 · CIF · QCIF Bandwidth (AI off) 384 Mbps incoming / 384 Mbps record / 384 Mbps outgoing Bandwidth (AI on) 200 Mbps incoming / 200 Mbps record / 200 Mbps outgoing Decoding (AI off) 2 × 32 MP @ 20 fps · 2 × 24 MP @ 20 fps · 4 × 16 MP @ 30 fps · 5 × 12 MP @ 30 fps · 8 × 8 MP @ 30 fps · 12 × 5 MP @ 30 fps · 16 × 4 MP @ 30 fps · 32 × 1080p @ 30 fps Decoding (AI on) 1 × 32 MP @ 20 fps · 1 × 24 MP @ 20 fps · 2 × 16 MP @ 30 fps · 4 × 12 MP @ 30 fps · 4 × 8 MP @ 30 fps · 8 × 5 MP @ 30 fps · 12 × 4 MP @ 30 fps · 24 × 1080p @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizSense (industrial AI chip, deep-learning) · AcuPick supported AcuPick Up to 32 channels · 1 combined event per channel/sec (V5 firmware) Face Detection (NVR) 2 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 16 ch (FD by camera + FR by recorder, 16 fps) · or 2 ch (FD+FR by recorder, 12 fps) Face Database 20 databases · 20,000 images · 2.5 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 4 channels by NVR · all channels by camera · 10 IVS rules per channel SMD Plus 8 channels by NVR · all channels by camera Video Metadata 8 channels (camera-side) · human / motor / non-motor vehicle attributes ANPR (by camera) All channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 4 × SATA · up to 16 TB per drive (~64 TB max) Video output 2 × HDMI (4K · 3840×2160) + 2 × VGA (1080p) · heterogeneous HDMI1/HDMI2 · simultaneous VGA1+HDMI1 / VGA2+HDMI2 Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 / 64 · Sub screen: 1 / 4 / 8 / 9 / 16 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 6 × alarm out (1 × 12 V 1 A power output) USB 3 ports: 1 × front USB 2.0 + 2 × rear USB 3.0 Network ports 2 × RJ-45 Gigabit Ethernet (10 / 100 / 1000 Mbps) · multi-address / load-balance / fault-tolerance bonding PoE None (use external PoE switch) RS-232 / RS-485 1 / 1 (RS-485 half-duplex) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4/IPv6 · UDP · NTP · DHCP · DNS · SMTP · UPnP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF 23.12 on V5 firmware (Profile T / S / G) · CGI · SDK Third-party camera support ONVIF · Panasonic · Sony · Axis · Arecont · Pelco · Canon · Samsung · Hanwha Mobile app DMSS (iOS / Android) Record modes General · motion detection · intelligent · alarm · POS Backup USB device · network Power supply 100 – 240 VAC · 50 – 60 Hz (internal universal-voltage PSU) Power consumption ≤ 13 W NVR-side (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 440 × 415.1 × 70 mm (1.5U) Net weight 4.74 kg Installation Rack or desktop Recommended firmware DH_NVR5XXX-EI_MultiLang V5.001.0000000.0.R.251220 (or later) — required for AcuPick, N+M cluster, iSCSI and ONVIF 23.12 Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 3 years (CCTV Guru Australia) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR5464-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua NVR HDD Installation Guide Frequently asked questions Does this NVR really support AcuPick? Yes. Dahua's V5 firmware (binary DH_NVR5XXX-EI_MultiLang_V5.001.0000000.0.R.251220 or later) enables AcuPick on the AI/ANZ unit alongside N+M cluster, iSCSI and ONVIF 23.12. The firmware is published on Dahua AU's official product page for this model and ships from CCTV Guru with V5 installed. Older 2023-vintage datasheets predate this firmware, which is why some online documentation doesn't mention AcuPick. Why is AcuPick capped at 32 channels when the NVR supports 64? AcuPick is heavy on AI-chip resources — running attribute extraction and image-search against 64 channels simultaneously isn't possible on the current 5-Series silicon. You choose which 32 of the 64 channels run AcuPick (the rest still record, and still get ANPR / SMD Plus / perimeter via camera-side AI). For 64-channel AcuPick, look at Dahua's NVR6 series. Why doesn't it have built-in PoE? The 5464 is a headend NVR for sites with managed PoE switches. Sixty-four cameras through fixed PoE ports would mean a 3–4U chassis and a power supply that doesn't fit the 1.5U form factor. Most 64-camera installs already have a switching layer, and dedicated PoE switches give you better cable layout, VLANs and redundancy than fixed-port PoE. What is AcuPick and what do I need for it? AcuPick is Dahua's next-generation attribute-and-image search — it extracts rich target attributes (clothing, body shape, vehicle make/model/colour/plate, direction) at the camera AND the NVR, then lets you search by reference image or combined attributes. You need Dahua's AcuPick-ready cameras (typically TiOC PV and 5-Series WizSense Plus IPC families). Standard WizSense cameras still record and recognise faces but the full AcuPick depth requires paired AcuPick IPCs. How big a PoE switch do I need for 64 cameras? Allow about 7–15 W per camera for Dahua WizSense bullets/turrets, more for active-deterrence units and PTZs. Two 48-port PoE+ switches with ~370–500 W each will run 64 typical cameras comfortably, with spare ports for VoIP and APs. CCTV Guru can quote a complete switch + NVR bundle. How much storage do I need for 64 cameras?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can it be rack-mounted? Yes — 1.5U / 440 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). It can also sit on a desk or shelf if you've allocated cabinet space. Plan for about 7–8 kg fully loaded with four drives. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

Dahua · 4 × 8MP Smart Dual-Light · 4CH, 8CH or AcuPick AI NVR 4× Dual Light 4K Dahua 4 × 8MP 4K Full-Colour Smart Dual-Light CCTV Kit — 4CH, 8CH or AcuPick NVR This Dahua 4-camera 8MP (4K) kit films in true full colour around the clock. Each of the 4 × DH-IPC-HDW3867EM-S-IL-ANZ Smart Dual-Light turrets runs invisible IR after dark, then flips to warm white light the instant WizSense AI classifies a person or vehicle — capturing clothing colour, vehicle colour and faces that IR-only cameras miss. Your choice of recorder — a 4-channel NVR4104 (Quick Pick), an 8-channel NVR4108 (Quick Pick) or an 8-channel AcuPick NVR5208 for full attribute search — powers and records every camera over a single Cat6 cable each. Cameras 4 × 8MP Dual-Light Recorder 4CH · 8CH · AcuPick Resolution 8MP · 4K 3840×2160 Night Vision 24/7 Full Colour AI SMD 4.0 · AcuPick Ready Weatherproof IP67 Rated Smart Dual-Light — 24/7 Full Colour Each turret runs invisible IR until WizSense classifies a person or vehicle, then flips to warm white light for full-colour evidence — capturing clothing and vehicle colour with no permanent light pollution. 8MP 4K · SMD 4.0 AI 3840×2160 on every channel — four times the detail of 1080p. SMD 4.0 classifies people and vehicles and ignores animals, foliage and headlights, so only real events reach your phone. Built-In Mic · AcuPick Ready Every camera has a built-in microphone for audio capture, and AcuPick-native firmware lets you search footage by person or vehicle when paired with a Dahua 5-Series NVR. Your Choice of NVR Pick the 4-channel NVR4104 or 8-channel NVR4108 for a tidy Quick-Pick system, or step up to the 8-channel AcuPick NVR5208 — full attribute search, face detection and 2 HDD bays, with spare PoE ports to expand. What's Included 4 × Dual-Light Cameras DH-IPC-HDW3867EM-S-IL-ANZ — 8MP Smart Dual-Light turret, 2.8 mm, IR 30 m + warm light 30 m, built-in mic, SMD 4.0, IP67. Full-colour coverage day and night. 1 × Recorder Your choice: DHI-NVR4104HS-P-AI/ANZ (4CH, Quick Pick, 1 SATA bay), the DHI-NVR4108HS-8P-AI/ANZ (8CH, Quick Pick, 8 PoE) or the DHI-NVR5208-8P-AI/ANZ (8CH 5-Series AcuPick, full attribute search, face detection, 2 SATA bays). All are WizSense AI NVRs with built-in PoE. Power PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay (HDD up to 10 TB) — not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Dahua ANZ stock. Available in white or black. Best For Homes & townhouses Full-colour cover of the four key approaches — front, back, drive and side gate. Shops & cafes Capture faces and clothing colour at the counter and entry in 8MP, day and night. Small offices Plug-and-play PoE and a silent fanless NVR suit comms cupboards and reception areas. Airbnb & rentals Clear full-colour coverage of entries and shared areas; remote monitoring via DMSS. Garages & sheds Full-colour coverage of vehicles, tools and access points overnight. Childcare (small) 24/7 colour footage for incident review and duty-of-care; SMD 4.0 cuts nuisance alerts. Smart Dual-Light Camera — DH-IPC-HDW3867EM-S-IL-ANZ (×4) Camera Type 8MP 4K Smart Dual-Light Turret WizSense Network Camera Max. Resolution 3840 × 2160 (8MP / 4K) @ 20 fps Lens Fixed 2.8 mm · 105° horizontal FOV Night Vision IR 30 m + Warm Light 30 m · full-colour 24/7 (IR mode selectable) AI SMD 4.0 · AcuPick (with 5-Series NVR) · IVS (Tripwire, Intrusion) Audio Built-in microphone (one-way) Compression Smart H.265+ / H.265 / H.264+ / H.264 Edge Storage MicroSD up to 512 GB Power / Ingress PoE 802.3af · 12 VDC · IP67 · –30 °C to +60 °C Warranty (Australia) 3 years · CCTV Guru Australia Installation Notes ›Camera placement: mount at 2.5–3 m so the warm-light array reaches the target zone for full-colour capture at night. ›Cabling & sealing: run solid-copper Cat6 (max 100 m per camera) and seal outdoor RJ-45 joins with a junction box or weatherproof tape. ›Full-colour mode: leave Smart Dual-Light on auto for IR-to-colour hand-off, or force full-colour where you always want colour footage. Setup & Installation Guides — Official Dahua First-time NVR setup, step by step — Dahua Technology UK & Ireland How to add IP cameras to your NVR — Dahua Technology (official) Downloads & Resources DH-IPC-HDW3867EM-S-IL-ANZ (Turret) Datasheet DHI-NVR4104HS-P-AI/ANZ (4CH) Datasheet DHI-NVR4108HS-8P-AI/ANZ (8CH) Datasheet DHI-NVR5208-8P-AI/ANZ (AcuPick) Datasheet Dahua Network Camera Quick Start Guide Dahua Network Video Recorder User Manual What's the difference between the standard and AcuPick NVR?The 4-channel NVR4104 and 8-channel NVR4108 give Quick Pick target search. The 8-channel AcuPick NVR5208 adds full attribute search — find a person or vehicle by colour, clothing and direction — plus face detection, 2 HDD bays and room to add cameras. What is Smart Dual-Light?The cameras use both IR and warm white light. They run on invisible IR until WizSense AI detects a person or vehicle, then switch to warm light for full-colour footage — so you get colour evidence only when it matters, without lighting up the property all night. Do they record in colour at night?Yes — full colour 24/7 via the warm-light array. You can also lock them to IR-only mode for discreet black-and-white at night if you prefer no visible light. Does this kit do AcuPick?The cameras are AcuPick-native. The 4-channel NVR4104 or 8-channel NVR4108 (Quick Pick) options give target search; choose the 8-channel AcuPick NVR5208 option for full AcuPick attribute search — find a person or vehicle by colour, clothing and direction. Does a hard drive come included?No — the NVR has one SATA bay (up to 10 TB) but ships without storage. For 4 × 8MP on motion-only, ~2 TB gives roughly 2–3 weeks; choose more for continuous recording. Can I add more cameras later?Yes — choose an 8-channel NVR (NVR4108 or AcuPick NVR5208) option and it has 4 spare PoE ports, so you can add up to 4 more cameras. The 4-channel NVR4104 option uses all 4 ports. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode.

Read more less

WizMind · 6-Series Flagship · 128-Channel · 8-HDD · 2U 128CH WizMind NVR The Dahua DHI-NVR608H-128-AI/ANZ is the 128-channel enterprise flagship of Dahua's WizMind range — an Ultra-series AI NVR engineered for the largest single-recorder deployments. AcuPick now runs across up to 64 channels simultaneously (double the smaller 608H-32), the AI by Recorder workload includes 8-channel face detection with a 40-database, 300,000-image face library, and total recording bandwidth scales to 1280 Mbps incoming / 1024 Mbps outgoing. Eight SATA bays with RAID 0/1/5/6/10 and drawer-style hot-swap deliver up to 128 TB on-board; iSCSI and eSATA take you well beyond that. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's a headend NVR with no built-in PoE — cameras connect via your managed network and PoE switch stack. Internal 100–240 VAC universal PSU, AS/NZS-compliant kettle cord, and a local 5-year warranty backed by CCTV Guru in Sydney. Built for shopping centres, transport hubs, hospitals, universities, casinos, large carparks and any single-site deployment that needs the maximum 128-camera ceiling on one recorder. WizMind 6-Series — enterprise-grade deep-learning at 128-camera scale AI Tier WizMind — Dahua's flagship AI Face Database 40 DBs · 300,000 images · 48 GB AcuPick on up to 64 channels Twice the AcuPick capacity of the smaller 608H-32. Click any person or vehicle in recorded video, and the NVR scans the active 64 channels for matches across hours, days or weeks — clothing colour, body shape, vehicle make / model / colour / direction included. Face Recognition at scale 8 NVR-side face detection channels feeding face recognition against a 40-database, 300,000-image library. Or 20 channels of camera-side detection + NVR-side recognition at 20 face snapshots/sec — large enough for staff registers, watchlists and visitor logs combined. Perimeter Protection (32 ch by NVR) 32 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each) — 8× the 5-Series capacity. Plus all-channel perimeter via camera-side processing — every camera benefits from human/vehicle classification. SMD Plus on 32 channels by NVR The AI chip's full SMD Plus capacity — 32 NVR-side channels of deep-learning second-pass classification, classifying targets as person or vehicle so only real events make it to your phone or VMS. Video Metadata by NVR (8 channels) NVR-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear. Works regardless of camera brand (camera-side metadata requires Dahua WizSense or WizMind IPCs). ANPR by camera (32 channels) Pair with Dahua ANPR cameras for 32 channels of licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Carpark, fleet yard, toll-point and multi-site ANPR. 1280 Mbps recording · 8K HDMI · ~128 TB RAID storage Bandwidth 1280 Mbps in / record · 1024 out Storage 8 SATA · RAID 0/1/5/6/10 · hot-swap 1280 Mbps recording bandwidth Higher than any other 5-Series or smaller 6-Series sibling. Spread across 128 cameras, plan for ~10 Mbps per camera average — perfect for 4 MP H.265+ on motion-record. For higher-bitrate workloads, prioritise the high-traffic channels and reserve the rest for lower-resolution sub-streams. 32-channel 1080p decoding The decoder handles 32 cameras at 1080p simultaneously for the live wall, or 2 × 32 MP @ 30 fps for the highest-res cameras. Reserve high-resolution decoding for the channels you actually display. 4× HDMI + 2× VGA outputs Drive up to six independent displays. HDMI3 supports 8K display; HDMI1 / HDMI2 deliver 4K each. Heterogeneous mode lets each HDMI run an independent layout — ideal for control rooms with multi-monitor walls. 8 SATA bays · drawer hot-swap Eight surveillance-grade HDDs (WD Purple Pro, Seagate SkyHawk AI) up to 16 TB each in a drawer-style chassis — swap drives during operation without taking the recorder down. Total ~128 TB on-board. Hardware RAID 0/1/5/6/10 Survive single-drive (RAID 5) or dual-drive (RAID 6) failures with zero footage loss. RAID 10 for performance + redundancy. Rebuilds run in the background while recording continues. eSATA + iSCSI + ESS1504C expansion External SATA archive port, iSCSI network storage, plus optional Dahua ESS1504C 4-HDD eSATA storage tray — essential for the long-retention workloads that 128-camera sites typically require. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR Enterprise I/O — 2.5 GbE dual NIC, 16 alarm-in, hot-swap chassis Dual 2.5 Gigabit NICs Two independent RJ-45 ports running at 10/100/1000/2500 Mbps — 2.5× faster than the gigabit NICs on the 5-Series. Bondable for multi-address, load-balance and fault-tolerance modes (critical at 128-camera scale). 16 alarm-in / 8 alarm-out Physical terminal block for 16 alarm inputs and 8 alarm outputs — wire in PIRs, door sensors, glass-break detectors, panic buttons, sirens or gate triggers for hardware-level event linkage. 4 × USB (2 × 2.0 + 2 × 3.0) Two front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. RS-232 + RS-485 One RS-232 plus one RS-485 (A/B) — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. N+M cluster failover Pair multiple 6-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss. Particularly important at 128-camera scale where a single-recorder outage would breach SLA. ONVIF (T / S / G) + DSS Pro Full ONVIF profile support plus Dahua's DSS Pro VMS for multi-site centralised control. Native integration with Sony, Axis, Pelco, Arecont, Canon, Samsung and any ONVIF-compliant camera. NVR608H-128 vs the family — how it compares The 608H-128 (this model) is the maximum channel-count single recorder in Dahua's AU/NZ NVR range — four times the channels of the 608H-32 sibling with twice the AcuPick capacity and 25% higher recording bandwidth. Choose this when you need every camera on one recorder. For sites running 32 cameras or fewer with the same WizMind feature depth, step down to the 608H-32. WizMind vs WizSense Top-Tier Comparison Specification NVR608H-128-AI/ANZ (this model) NVR608H-32-AI/ANZ NVR5864-AI/ANZ (WizSense) AI tier WizMind (enterprise) WizMind (enterprise) WizSense (SMB / enterprise) IP channels (licence) 128 32 64 AcuPick channels Up to 64 Up to 32 Up to 32 Bandwidth (AI off) 1280 / 1024 Mbps 1280 / 1024 Mbps 384 / 200 Mbps Face DBs · images 40 · 300,000 40 · 300,000 20 · 20,000 Face Detection (NVR) 8 channels 8 channels 2 channels Perimeter Protection (NVR) 32 channels 32 channels 4 channels SMD Plus (NVR) 32 channels 32 channels 8 channels Video Metadata (NVR-side) 8 channels 8 channels Camera-side only Built-in PoE None None None HDD bays · RAID · hot-swap 8 SATA · RAID · Yes 8 SATA · RAID · Yes 8 SATA · RAID · No Network ports 2 × 2.5 GbE (bondable) 2 × 2.5 GbE (bondable) 2 × Gigabit (bondable) Video outputs 4 × HDMI (incl. 8K) + 2 × VGA 4 × HDMI (incl. 8K) + 2 × VGA 2 × HDMI 4K + 2 × VGA Form factor 2U 2U 2U Warranty (Australia) 5 years 5 years 3 years Full Specifications Model DHI-NVR608H-128-AI/ANZ Series WizMind · NVR600-AI/ANZ (Australia / NZ market) Form factor 2U · 8-HDD · rack or desktop · drawer-style HDD hot-swap · NO built-in PoE IP channels 128 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 Bandwidth (AI off) 1280 Mbps incoming / 1280 Mbps record / 1024 Mbps outgoing Decoding capability 32 × 1080p @ 30 fps · 2 × 32 MP @ 30 fps · 4 × 16 MP @ 30 fps · 8 × 8 MP @ 30 fps · 16 × 4 MP @ 30 fps · 72 × 720p @ 30 fps · 160 × D1 @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizMind (industrial processor + built-in deep-learning modules) AcuPick Up to 64 channels · 1 combined event per channel/sec Face Detection (NVR) 8 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 20 ch (FD by camera + FR by recorder, 20 fps) · or 8 ch (FD+FR by recorder) Face Database 40 databases · 300,000 images · 48 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 32 channels by NVR · 10 IVS rules per channel · all-channel by camera SMD Plus 32 channels by NVR · all-channel by camera Video Metadata (NVR) 8 channels (NVR-side processing — 6-Series exclusive) Video Metadata (Camera) 32 channels — human / motor / non-motor vehicle attributes ANPR (by camera) 32 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · Perimeter protection · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Heat map · Object monitoring EPTZ · One-click arming / disarming Yes N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 8 × SATA · up to 16 TB per drive (~128 TB max) · drawer-style hot-swap RAID modes RAID 0 · RAID 1 · RAID 5 · RAID 6 · RAID 10 Optional storage expansion Dahua ESS1504C 4-HDD eSATA storage tray Video output 4 × HDMI + 2 × VGA · HDMI1/2 up to 4K · HDMI3 up to 8K · HDMI4 up to 1080p · VGA1/2 up to 1080p · heterogeneous or simultaneous routing Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 · Sub screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 8 × alarm out USB 4 ports: 2 × front USB 2.0 + 2 × rear USB 3.0 Network ports 2 × RJ-45 Multi-Gigabit Ethernet (10 / 100 / 1000 / 2500 Mbps) · multi-address / load-balance / fault-tolerance bonding PoE None (use external PoE switch) RS-232 / RS-485 1 RS-232 · 1 RS-485 (A/B) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4 · RTSP · UDP · NTP · DHCP · DNS · SMTP · UPnP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF Profile T / S / G · CGI · SDK · RTSP Third-party camera support ONVIF · RTSP · Sony · Axis · Arecont · Pelco · Canon · Samsung Mobile app DMSS (iOS / Android) Record modes Manual · alarm · motion detection · scheduled Backup Portable HDD · eSATA disk · burner · USB device · network Power supply 100 – 240 VAC · 50 / 60 Hz Power consumption < 18 W (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 444 × 456.6 × 95 mm (2U) Net weight 6.4 kg (without HDD) Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD · Security Baseline 2.3 Warranty 5 years (CCTV Guru Australia · WizMind series) CCTV Storage Calculator Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Allow for reduced usable capacity when using RAID redundancy. Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR608H-128-AI/ANZ Datasheet Dahua NVR608 Quick Start Guide Dahua NVR608 User Manual Dahua NVR HDD Installation Guide Frequently asked questions What's the real difference between the 608H-128 and the 608H-32? Same hardware platform — same 2U chassis with 8 HDD bays, same WizMind AI processor, same dual 2.5 GbE NICs, same 4 × HDMI outputs (including the 8K port). The differences are the IP channel licence (128 vs 32) and the AcuPick capacity (64 channels vs 32). At 128 channels, the recording bandwidth (1280 Mbps) is shared across four times as many cameras, so plan camera resolutions accordingly — 4 MP H.265+ is the sweet spot. Does the WizMind series get a longer warranty? Yes — WizMind 6-Series enterprise NVRs ship with a 5-year warranty in Australia, two years longer than the 3-year warranty on Dahua's WizSense (4-Series and 5-Series) products. The longer cover reflects the project-grade build and is part of why WizMind units carry a premium over WizSense. Why does AcuPick only run on 64 channels when the NVR supports 128? AcuPick is heavy on AI-chip resources — running attribute extraction and image-search against 128 channels simultaneously isn't possible on the current 6-Series silicon. You choose which 64 of the 128 channels run AcuPick (the rest still record, and still get ANPR / SMD Plus / perimeter via camera-side AI on Dahua WizSense or WizMind IPCs). Why doesn't it have built-in PoE? The 6-Series is purpose-built for enterprise headend deployments. 128 cameras through built-in PoE ports would mean a 4U+ chassis with extreme power draw. At this scale, sites always have a managed switching layer — pair this NVR with a stack of 24 or 48-port managed PoE+ switches across two or more network closets. How big a PoE switch stack do I need for 128 cameras? Allow about 7–15 W per camera for Dahua WizSense bullets/turrets, more for active-deterrence and PTZ cameras. Three 48-port PoE+ switches with ~370–500 W each will run 128 typical cameras comfortably, with spare ports for VoIP and APs. CCTV Guru can quote a complete switch + NVR + camera bundle. How much storage do I need for 128 cameras at 30 days retention?Estimate the hard drive capacity and recording time for this recorder using your connected camera count, camera bitrates and recording schedule. Use our storage calculator for an estimate based on your settings. Can it be rack-mounted? Yes — 2U / 444 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). At 6.4 kg empty (without HDDs), plan for ~13–15 kg fully loaded with eight drives. The drawer-style HDD bays support hot-swapping, so you can replace failed drives without unmounting the chassis from the rack. 5-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

Ubiquiti UniFi · NDAA COMPLIANT High-Performance Network Storage Built for Modern Infrastructures Introducing the Ubiquiti UNAS-4-W, a powerful 4-bay network-attached storage solution designed to deliver seamless data management, centralized backups, and high-density file sharing for professional office deployments and advanced environments. Engineered for maximum reliability and strict regulatory frameworks, this unit integrates directly into the unified ecosystem to provide secure, lightning-fast local asset handling. Storage Capacity 4-Bay 2.5"/3.5" HDD SSD Caching Dual M.2 NVMe Slots Networking Interface 2.5 GbE RJ45 Port Power Architecture PoE+++ Included Adapter Advanced Data Protection & Ecosystem Integration The UNAS-4-W combines hardware agility with robust data protection utilities. Featuring native support for RAID configurations (RAID 5, 6, 10), automated snapshot scheduling, and military-grade file encryption, it guarantees absolute security for sensitive corporate datasets. Accelerated by dual M.2 NVMe SSD cache slots, random input-output workloads are handled smoothly, while multi-protocol file sharing (SMB, NFS) ensures frictionless integration across heterogeneous workstation environments. Flexible Storage Scaling Equipped with four independent drive bays supporting both high-capacity 3.5-inch mechanical hard drives and responsive 2.5-inch solid-state drives, allowing organizations to tailor capacity and performance ratios precisely to their operational demands. Streamlined PoE+++ Deployment Reduces cable clutter and simplifies hardware installation by utilizing an advanced 90W PoE+++ power mechanism, delivering both steady data communication and ample power delivery over a single structured line. Technical Specification Matrix Model UNAS-4-W Form Factor Desktop Drive Bays (4) 2.5"/3.5" HDD bays, (2) M.2 NVMe SSD cache slots Networking Interface (1) 2.5 GbE RJ45 Port Processor & Memory Quad-Core ARM Cortex-A55 @ 1.7 GHz, 4 GB RAM Expansion & Display (1) 5 Gbps USB-C Port, 1.47" Color LCM Display Power Method PoE+++ (90W Adapter Included) Regulatory Compliance NDAA Compliant, FCC, CE, IC Is the Ubiquiti UNAS-4-W NDAA compliant? Yes, the UNAS-4-W is fully NDAA compliant, making it completely eligible for installation in government facilities, critical infrastructure, and commercial networks bound by strict compliance regulations. What hard drives are compatible with the 4 bays? The device accepts standard enterprise-grade 3.5-inch SATA hard drives as well as 2.5-inch HDDs and SSDs, providing total flexibility over capacity limits and system speed requirements. Does the unit require a standard wall outlet for power? Not necessarily. The unit features a unique PoE+++ power delivery system and ships with a compatible 90W PoE+++ adapter, streamlining clean desktop or shelf deployments. What software application manages the storage volumes? The device integrates seamlessly with UniFi Drive (version 3.4.5 and later), allowing direct file manipulation, user group access permissions, and automated cloud backups. Official Ubiquiti Stock NDAA Compliant Hardware Aust-Wide Delivery

Read more less

Dahua · 4-Channel Penta-brid 4K XVR · 5-in-1 HDCVI/AHD/TVI/CVBS/IP · Mini 1U 4CH 4K XVR Dahua DH-XVR5104H-4KL-X — 4-Channel Penta-brid 4K XVR (Mini 1U, 1 HDD) The Dahua DH-XVR5104H-4KL-X is a compact, affordable 4-channel Penta-brid recorder that accepts five signal types — HDCVI, AHD, TVI, CVBS and IP — so it records existing coax cameras and modern IP cameras together, up to 4K. It includes Smart Search and IVS intelligent video for tripwire and intrusion alerts, with Smart H.265+ to keep storage low. A neat mini 1U chassis with one HDD bay makes it an easy, budget-friendly upgrade from an old analogue system. Channels 4CH · 4 BNC Inputs Penta-brid 5-in-1 Resolution Up to 4K Smart IVS · Smart Search Storage 1 HDD Bay Remote DMSS App · P2P Penta-brid 5-in-1 — Mix Coax & IP Every channel accepts HDCVI, AHD, TVI, CVBS or IP — keep your existing coax cameras and add IP cameras over time without rewiring. Up to 4K · Smart H.265+ Records up to 4K with Smart H.265+ dual-stream compression to keep storage and bandwidth low while preserving detail. IVS Smart Detection Intelligent Video System adds tripwire and intrusion detection, plus Smart Search to jump straight to events instead of scrubbing the timeline. Mini 1U · 1 HDD A compact, quiet chassis with one SATA bay, up to 6 IP channels and 24 Mbps incoming. P2P remote access via the free DMSS app and SmartPSS. Specifications — DH-XVR5104H-4KL-X Recorder Type 4-Channel Penta-brid 4K XVR (Mini 1U) Signal Inputs HDCVI · AHD · TVI · CVBS · IP (5-in-1) BNC Ports 4 × BNC IP Channels Up to 6 IP cameras (each up to 8MP) Max. Resolution 4K Incoming Bandwidth 24 Mbps Smart Detection IVS (tripwire, intrusion) · Smart Search Compression Smart H.265+ / H.265 · dual-stream HDD Bays 1 × SATA (HDD not included) Remote P2P · DMSS app · SmartPSS · ONVIF Warranty (Australia) 3 years · CCTV Guru Australia Downloads & Resources DH-XVR5104H-4KL-X Datasheet Dahua Digital Video Recorder Quick Start Guide Dahua HDCVI AI DVR User Manual What does Penta-brid mean?The XVR accepts five signal types on each channel — HDCVI, AHD, TVI, CVBS and IP — so you can run existing coax cameras and modern IP cameras on the same recorder. Can I connect IP cameras too?Yes — up to 6 IP channels (each up to 8MP) in addition to the 4 BNC inputs. Does it include a hard drive?No — it has one SATA bay but ships without storage. Add a surveillance-grade WD Purple or Seagate SkyHawk drive. Can I view it remotely?Yes — free DMSS app (iOS/Android) and SmartPSS via P2P, no static IP or port forwarding required. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

Dahua · 4 × 5MP Turret · SMD+ AI · 30 m IR · 4CH or 8CH PoE AI NVR 4× 5MP WizSense Dahua 4 × 5MP WizSense AI CCTV Kit — 4 Turret Cameras + 4-Channel or 8-Channel PoE AI NVR A complete, plug-and-play 4-camera 5MP system for homes and small businesses. The 4 × DH-IPC-HDW2541EMP-AS-ANZ WizSense turrets use SMD+ AI to tell people and vehicles apart from animals, foliage and weather — so you're only alerted when it matters — with 30 m IR night vision and a built-in mic. Choose your recorder: the compact 4-channel NVR4104 for a tidy four-camera system, or the 8-channel NVR4108 with 4 spare PoE ports to expand later. Either way each camera runs on a single Cat6 cable carrying power and data. Which recorder should I choose? 4-channel NVR4104: choose this for four cameras with no expansion planned. All four PoE ports are used by the included cameras. 8-channel NVR4108: choose this if you may add cameras later. The kit still includes four cameras, leaving four PoE ports free. Both options include: four 5MP WizSense turret cameras and one PoE AI recorder, with DMSS remote viewing. Before adding to cart: select your recorder option above. A recording hard drive and network cabling are not included; add these separately if required. Need help choosing? Call 1800 228 848. Cameras 4 × 5MP Turret Recorder 4CH or 8CH AI NVR Resolution 5MP · 2880×1620 AI WizSense SMD+ Night Vision 30 m IR Weatherproof IP67 Rated WizSense SMD+ — Only Alerts That Matter Smart Motion Detection Plus classifies motion as human or vehicle and ignores animals, foliage, rain and passing headlights — so you get push notifications only when a real person or vehicle is detected. 5MP Detail 2880×1620 captures more detail than 1080p or 4MP — faces at the door, plates in the driveway and labels at the counter stay identifiable in recorded footage. Built-In Mic · 30 m IR Every camera has a built-in microphone for audio capture and clear 30 m infrared night vision with automatic day/night switching. Your Choice of NVR Pick the 4-channel NVR4104 for a tidy four-camera install, or the 8-channel NVR4108 for 4 spare PoE ports to add cameras later. Both are fanless WizSense AI NVRs with 4K HDMI and free DMSS remote viewing. What's Included 4 × Cameras DH-IPC-HDW2541EMP-AS-ANZ — 5MP WizSense turret: SMD+ human/vehicle detection, 30 m IR, built-in mic, 120 dB WDR, MicroSD up to 256 GB, IP67. ANZ firmware. 1 × Recorder (your choice) 4CH — DHI-NVR4104HS-P-AI/ANZ (4-channel, 4 PoE) — a tidy four-camera system.8CH — DHI-NVR4108HS-8P-AI/ANZ (8-channel, 8 PoE, 4 spare) to expand later. Both: 4K WizSense AI NVR, 1 SATA bay, 4K HDMI, SMD 4.0, DMSS remote access. Power 4 × PoE ports built into the NVR — one Cat6 cable per camera carries power and data, so there are no separate power supplies. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 1 SATA bay (HDD up to 10 TB) — not included. Add a surveillance-grade Seagate SkyHawk or WD Purple drive. Use our storage calculator to choose a capacity for your recording settings. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Official Dahua ANZ stock. Best For Homes & townhouses Covers the four key approaches — front, back, drive and side gate — with AI alerts. Shops & cafes 5MP detail at the counter and entry; SMD+ cuts nuisance alerts during business hours. Small offices Plug-and-play PoE and a silent fanless NVR suit comms cupboards and reception areas. Airbnb & rentals Monitor entries and shared areas via DMSS; MicroSD edge backup if the NVR is tampered with. Garages & sheds Cover vehicles, tools and access points; IP67 handles dust and damp. Childcare (small) 5MP footage for incident review and duty-of-care; SMD+ reduces nuisance alerts. Camera — DH-IPC-HDW2541EMP-AS-ANZ (×4) Camera Type 5MP WizSense Fixed IR Turret Network Camera Image Sensor 1/2.7" CMOS Max. Resolution 5MP · 2880 × 1620 @ 20 fps Lens Fixed 2.8 mm Night Vision IR up to 30 m AI SMD+ · Perimeter Protection · Tripwire · Intrusion Audio Built-in microphone WDR / Compression 120 dB WDR · Smart H.265+ Edge Storage MicroSD up to 256 GB Power / Ingress PoE 802.3af · 12 VDC · IP67 · –30 °C to +60 °C Warranty (Australia) 3 years · CCTV Guru Australia Installation Notes ›Camera placement: position each camera to cover an entry or approach for the best SMD+ detection accuracy. ›Cabling & sealing: run solid-copper Cat6 (max 100 m per camera) and seal outdoor RJ-45 joins with a junction box or weatherproof tape. ›Expansion: choose the 8-channel NVR4108 option (4 spare PoE ports) if you'll want to add cameras later — no recorder swap needed. Set It Up — Official Dahua First-time NVR setup, step by step — Dahua Technology UK & Ireland Downloads & Resources DH-IPC-HDW2541EMP-AS-ANZ Datasheet DHI-NVR4104HS-P-AI/ANZ (4CH) Datasheet DHI-NVR4108HS-8P-AI/ANZ (8CH) Datasheet Dahua Network Camera Quick Start Guide Dahua Network Video Recorder User Manual What is WizSense SMD+?Smart Motion Detection Plus is Dahua's deep-learning AI that classifies motion as human or vehicle, filtering out animals, foliage and weather — so you only get alerted on what matters. Does a hard drive come included?No — the NVR has one SATA bay (up to 10 TB) but ships without storage. For 4 × 5MP on motion-only, ~2 TB gives roughly 3 weeks; choose 4 TB+ for continuous recording. Do I need a separate PoE switch?No — the NVR has 4 built-in PoE ports. Each camera connects directly with a single Cat6 cable carrying power and video. Can I add more cameras later?Yes — choose the 8-channel NVR4108 option and you get 4 spare PoE ports to add up to 4 more cameras. The 4-channel NVR4104 option uses all 4 ports. Is remote viewing included?Yes — the free DMSS app (iOS/Android) gives live view, playback and push alerts from anywhere via P2P. No static IP or port forwarding required. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 4-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode.

Read more less

TP-Link VIGI · 10 × 8MP 4K Full-Colour Turret · Active Defense · 16CH PoE+ NVR 10 × 8MP VIGI Kit 10 × 8MP 4K Full-Colour Turret Cameras + 16CH PoE+ NVR — Australian Stock & 3-Year Warranty This TP-Link VIGI 10-camera kit pairs ten InSight S485 8MP 4K full-colour turret cameras with the VIGI NVR2016H-16MP 16-channel PoE+ recorder — full high-resolution coverage today, with 6 spare channels to grow later. Every camera delivers 24/7 full colour through a fast F1.6 lens, with Human & Vehicle AI, Active Defense (white-light + audible warning) and two-way audio to deter intruders in real time. The recorder powers and connects all ten cameras from its built-in PoE+ ports (140 W budget — ample for ten cameras), outputs 4K HDMI, and stores footage across two SATA bays (up to 16 TB each). A clean, scalable system designed and supported for the Australian market with a local 3-year warranty. Cameras 10 × 8MP 4K Recorder 16CH NVR · 6 Spare Deterrence Active Defense Night Vision 24/7 Full Colour Audio Two-Way Talk Weatherproof IP67 Rated 4K Detail in Full Colour 24/7 Ten 8MP InSight S485 turrets capture vivid 4K colour down to 0 lux using an F1.6 lens and white LEDs — clear faces, clothing colour and number plates across every entrance, aisle and perimeter, day and night. Active Defense + Two-Way Audio On AI detection, each camera flashes its white light and sounds an audible warning, while built-in mic and speaker let you talk live through the VIGI app to challenge trespassers — proactive protection, not just evidence. Powered & Ready to Expand The NVR2016H-16MP powers and connects all ten cameras from its built-in PoE+ ports — no separate switch — and leaves 6 channels and ports free to add more cameras as your site grows. 4K HDMI plus VGA output. Smart AI & Big Storage Human & Vehicle Classification cuts false alerts, while two SATA bays (up to 16 TB each) and efficient H.265+ keep weeks of footage. One-Click System Initialise makes setup fast. What's Included 10 × Cameras VIGI InSight S485 (2.8mm) — 8MP 4K full-colour turret, F1.6 lens, 24/7 colour, Human & Vehicle AI, Active Defense, two-way audio, 120 dB WDR, IP67. 1 × Recorder VIGI NVR2016H-16MP — 16-channel 4K NVR, 16 built-in PoE+ ports (140 W), 2 × SATA (to 16 TB each), 4K HDMI + VGA, H.265+. 10 channels used, 6 spare. Power Built-in PoE+ ports power all ten cameras over a single Cat6 cable each — no separate switch. Network cabling is run on site and is not included; pre-made Cat6 patch leads are available separately. Storage 2 SATA bays (up to 16 TB each). HDD not included — add a surveillance-grade Seagate SkyHawk or WD Purple drive sized to your retention (see table below). Mounting Each camera includes mounting hardware, screws and waterproof cable gaskets; the NVR ships with power adapter, mouse, HDD cables and quick start guide. Warranty 3-Year Australian warranty · local CCTV Guru tech support. Australian stock. Best For Retail & hospitality Cover the floor, tills, entries, storeroom and car park in 4K colour from one recorder. Warehouses & yards Ten high-res cameras with active deterrence across docks, gates, aisles and perimeters. Offices, strata & schools One-cable PoE+ install and 4K review for corridors, car parks and common areas. Larger homes & acreage Plenty of coverage for the house, sheds, gates and driveways — with room to add more. Camera — TP-Link VIGI InSight S485 (2.8mm) (×10) Camera Type 8MP 4K Full-Colour Fixed Turret (Active Defense) Image Sensor 1/2.7" Progressive Scan CMOS Max. Resolution 8MP · 3840 × 2160 @ 25 fps Lens Fixed 2.8 mm @ F1.6 · 111.4° horizontal FOV DORI (Detect) 85 m Night Vision 24/7 full colour (0 lux with white light) · Smart IR · 4 × white + 4 × IR LED (30 m) Wide Dynamic Range 120 dB True WDR · 3D DNR · BLC / HLC Smart Analytics Human & Vehicle Classification · People & Vehicle Analytics Active Deterrence White-light flashing + audible warning (AI-triggered) Audio Two-way audio · built-in mic (5 m) & speaker Compression H.265+ / H.265 / H.264+ / H.264 On-board Storage microSD up to 512 GB (card not included) Power PoE 802.3af/at (max 12.5 W) or 12V DC Weather Rating IP67 · metal housing · −30°C to 60°C Warranty (Australia) 3 years · CCTV Guru Australia Recorder — TP-Link VIGI NVR2016H-16MP Channels 16 IP channels (10 used, 6 spare) · 16-channel synchronous playback Built-in PoE 16 × 10/100 Mbps PoE+ (802.3af/at) · 140 W total · 30 W max per port Recording Resolution Up to 8MP per channel · H.265+ Decoding 25fps: 10-ch @ 3MP / 16-ch @ 1080p · 30fps: 4-ch @ 8MP Bandwidth 320 Mbps incoming / 320 Mbps outgoing Video Output 1 × HDMI (4K, 3840 × 2160/30Hz) + 1 × VGA — independent Storage 2 × SATA bays, up to 16 TB each (HDD not included) · 1 × eSATA Network 1 × RJ45 10/100/1000 Mbps Gigabit Interoperability ONVIF Profile S · CGI · RTSP Remote Access Free VIGI app (Android & iOS) · web UI Warranty (Australia) 3 years · CCTV Guru Australia CCTV Storage Calculator Estimate the hard drive capacity and recording time for this 10-camera kit using your preferred recording settings. Open Storage Calculator Recording time varies with bitrate, frame rate, scene activity and recording mode. Installation Notes ›Power & expansion: the NVR's 140 W PoE budget comfortably runs all ten 8MP cameras, leaving 6 spare ports/channels. If you later expand toward a full 16 cameras, add a small external PoE switch for the extra cameras. ›Cabling & sealing: run solid-copper Cat6 to each camera (up to 100 m) and seal outdoor RJ-45 joins with a junction box or weatherproof tape against moisture and salt air. ›NVR & storage: fit surveillance-grade HDDs into the SATA bays before first boot, and place the recorder in a cool, dust-free, ventilated spot for reliable 24/7 recording. Datasheets VIGI InSight S485 Camera Datasheet VIGI NVR2016H-16MP Datasheet Why a 16-channel NVR for 10 cameras?It gives you 6 spare channels and PoE ports to add more cameras later without replacing the recorder — and keeps all ten cameras comfortably within the 140 W PoE budget. Does the kit include hard drives?No — the NVR has two empty SATA bays (up to 16 TB each). Add surveillance-grade drives sized to your retention; use our storage calculator. Do the cameras record in colour at night?Yes. Each InSight S485 keeps true 24/7 full-colour 4K video down to 0 lux using its F1.6 lens and white LEDs. How does Active Defense work?On AI detection of a person or vehicle, the camera flashes its white light and sounds an audible warning, and you can speak live through two-way audio. Will it alert me to people and vehicles only?Yes — Human & Vehicle Classification plus line-crossing and intrusion rules filter out irrelevant movement to reduce false alarms. Can I view it remotely?Yes. The free VIGI app for iOS and Android gives live view, playback and push alerts from anywhere, with no monthly fees. Are the cameras weatherproof?All ten turrets are IP67-rated with metal housings and a −30°C to 60°C range, suited to exposed Australian sites. Is it covered by warranty in Australia?Yes — 3-year Australian warranty with local CCTV Guru tech support. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

Read more less

WizMind · 6-Series Flagship · 32-Channel · 8-HDD · 2U32CH WizMind NVR The Dahua DHI-NVR608H-32-AI/ANZ is a 32-channel WizMind enterprise AI NVR — Dahua's flagship 6-Series recorder with industrial-grade deep-learning, 1024 Mbps recording bandwidth, eight SATA bays with RAID 0/1/5/6/10 and HDD hot-swap, dual 2.5 Gigabit NICs, and four HDMI outputs including 8K display. The face database alone is 15× larger than the 5-Series — 40 databases, 300,000 images, 48 GB capacity — and NVR-side AI runs face recognition on 20 channels, perimeter protection on 24 channels and SMD Plus on all 32. This is the official Australia / NZ-market SKU (the AI/ANZ suffix). It's a headend NVR with no built-in PoE — cameras connect through an external PoE switch or your existing managed network. Internal 100–240 VAC universal PSU, AS/NZS-compliant kettle cord, and a local 5-year warranty backed by CCTV Guru in Sydney (two years longer than the WizSense 5-Series). Built for casinos, banks, large transport hubs, hospitals, government facilities and any deployment where the 5-Series ceiling isn't enough. WizMind 6-Series — enterprise-grade deep-learning AI Tier WizMind — top of the Dahua AI range Face Database 40 DBs · 300,000 images · 48 GB Face Recognition at scale 20 channels of camera-side face detection feeding NVR-side recognition at 20 face snapshots/sec, or 4 channels of full FD+FR by the recorder at 12 fps. Forty databases hold up to 300,000 face images — large enough for staff registers, watchlists and visitor logs combined. Perimeter Protection (24 ch by NVR) 24 NVR-side channels of tripwire and intrusion analytics (10 IVS rules each) — six times the 5-Series capacity. Plus all-channel perimeter via camera-side processing — every camera benefits from human/vehicle classification. SMD Plus on all 32 channels by NVR The NVR runs Smart Motion Detection Plus across every single channel simultaneously — no AI / non-AI channel split. Deep-learning second-pass classification on the entire site at once. Video Metadata by NVR (8 channels) NVR-side metadata extraction — top colour, bottom colour, hat, bag, umbrella, gender, age, vehicle make / model / colour / plate, helmet wear. The 5-Series only does metadata camera-side; the 6-Series adds NVR-side processing. AcuPick on all 32 channels Run AcuPick image-and-attribute search across every connected camera simultaneously — no 16-channel cap like the 5-Series. Pair with Dahua's AcuPick-ready WizMind / TiOC IPCs for full front-and-back search depth. ANPR by camera (32 channels) Pair with Dahua ANPR cameras for full 32-channel licence-plate recognition feeding a 20,000-plate database with blocklist / allowlist control. Carpark, fleet yard, toll-point and multi-site ANPR. 1024 Mbps recording · 8K HDMI · ~128 TB RAID storage Bandwidth 1024 Mbps in / record · 800 Mbps out Storage 8 SATA · RAID 0/1/5/6/10 · hot-swap 1024 Mbps recording bandwidth 2.7× the 5-Series ceiling. Comfortable for 32 cameras at 16 MP each on H.265+, or a mix of 32 MP and 4 MP feeds. AI-enabled bandwidth is still 512 Mbps — more than most 5-Series NVRs deliver flat-out. 32 MP at 30 fps decoding The decoder handles 32 MP cameras at full 30 fps (vs 20 fps on 5-Series). For 4K cameras, decode 8 channels at 30 fps simultaneously; for 1080p, decode all 32 channels at once. 4× HDMI + 2× VGA outputs Drive up to six independent displays. HDMI3 supports 8K display; HDMI1 / HDMI2 deliver 4K each. Configure heterogeneous or simultaneous output for control rooms with multi-monitor walls. 8 SATA bays · drawer hot-swap Eight surveillance-grade HDDs (WD Purple Pro, Seagate SkyHawk AI) up to 16 TB each in a drawer-style chassis — swap drives during operation without bringing the recorder down. Total ~128 TB on-board. Hardware RAID 0/1/5/6/10 Survive single-drive (RAID 5) or dual-drive (RAID 6) failures with zero footage loss. RAID 10 for performance + redundancy. Rebuilds run in the background while recording continues. eSATA + iSCSI + ESS1504C expansion External SATA archive port, iSCSI network storage, plus optional Dahua ESS1504C 4-HDD eSATA storage tray — easy capacity expansion beyond the 8 on-board bays. See AcuPick in action Dahua AcuPick — Video search technology demonstration AcuPick — how to configure and search on a Dahua NVR Enterprise I/O — 2.5 GbE dual NIC, 16 alarm-in, hot-swap chassis Dual 2.5 Gigabit NICs Two independent RJ-45 ports running at 10/100/1000/2500 Mbps — 2.5× faster than the gigabit NICs on the 5-Series. Bondable for multi-address, load-balance and fault-tolerance modes. 16 alarm-in / 8 alarm-out Physical terminal block for 16 alarm inputs and 8 alarm outputs — wire in PIRs, door sensors, glass-break detectors, panic buttons, sirens or gate triggers for hardware-level event linkage. 4 × USB (2 × 2.0 + 2 × 3.0) Two front USB 2.0 plus two rear USB 3.0 ports — plug in backup drives, USB mice, keyboards or service tools without juggling cables behind the rack. RS-232 + RS-485 One RS-232 plus one RS-485 (A/B) — integrate with POS systems, gate controllers, access control panels, PTZ joysticks or third-party VMS that need legacy serial. N+M cluster failover Pair multiple 6-Series NVRs in an N+M cluster — backup recorders automatically take over if a primary fails, ensuring zero footage loss for compliance-driven sites. ONVIF (T / S / G) + DSS Pro Full ONVIF profile support plus Dahua's DSS Pro VMS for multi-site centralised control. Native integration with Sony, Axis, Pelco, Arecont, Canon, Samsung and any ONVIF-compliant camera. NVR608H-32 vs the family — how it compares The 6-Series WizMind is a different tier from the 5-Series WizSense — enterprise-grade silicon, much larger face database, NVR-side metadata, 8K HDMI output, 2.5 GbE NICs and dramatically more bandwidth. Choose this when the 5-Series ceiling isn't enough. For sites running fewer than 32 cameras, the 5-Series WizSense range (5208 through 5864) gives you AcuPick at a lower cost-per-channel. WizMind 6-Series vs WizSense 5-Series Comparison Specification NVR608H-32-AI/ANZ (this model) NVR5864-AI/ANZ NVR5832-16P-AI/ANZ AI tier WizMind (enterprise) WizSense (SMB / enterprise) WizSense (SMB / enterprise) IP channels 32 64 32 Bandwidth (AI off / on) 1024 / 512 Mbps 384 / 200 Mbps 384 / 200 Mbps Face DBs · images · capacity 40 · 300,000 · 48 GB 20 · 20,000 · 2.5 GB 20 · 20,000 · 2.5 GB Face Detection (NVR) 4 ch · 12 fps 2 ch · 12 fps 2 ch · 12 fps Face Recognition (NVR-side) 20 ch FD-by-cam @ 20 fps 16 ch FD-by-cam @ 16 fps 16 ch FD-by-cam @ 16 fps Perimeter Protection (NVR) 24 channels 4 channels 4 channels SMD Plus (NVR) 32 channels 8 channels 8 channels Video Metadata (NVR) 8 channels (NVR-side) Camera-side only Camera-side only AcuPick channels Up to 32 (full licence) Up to 32 (half of 64) Up to 16 (half of 32) Max-resolution decoding 32 MP @ 30 fps 32 MP @ 20 fps 32 MP @ 20 fps Built-in PoE None None 16 ports · 150 W HDD bays · RAID · hot-swap 8 SATA · RAID · Yes 8 SATA · RAID · No 8 SATA · RAID · No Network ports 2 × 2.5 GbE (bondable) 2 × Gigabit (bondable) 1 × Gigabit Video outputs 4 × HDMI (incl. 8K) + 2 × VGA 2 × HDMI 4K + 2 × VGA 2 × HDMI 4K + 2 × VGA Alarm I/O 16 in / 8 out 16 in / 8 out 16 in / 8 out Form factor 2U · 6.4 kg 2U · 6.4 kg 2U · 6.9 kg Warranty (Australia) 5 years 3 years 3 years Full Specifications Model DHI-NVR608H-32-AI/ANZ Series WizMind · NVR600-AI/ANZ (Australia / NZ market) Form factor 2U · 8-HDD · rack or desktop · drawer-style HDD hot-swap · NO built-in PoE IP channels 32 · up to 32 MP per channel Supported resolutions 32 MP · 24 MP · 16 MP · 12 MP · 8 MP · 5 MP · 4 MP · 1080p · 720p · D1 Bandwidth (AI off) 1024 Mbps incoming / 1024 Mbps record / 800 Mbps outgoing Bandwidth (AI on) 512 Mbps incoming / 512 Mbps record / 400 Mbps outgoing Decoding capability 2 × 32 MP @ 30 fps · 2 × 24 MP @ 30 fps · 4 × 16 MP @ 30 fps · 8 × 8 MP @ 30 fps · 16 × 4 MP @ 30 fps · 32 × 1080p @ 30 fps · 72 × 720p @ 30 fps · 160 × D1 @ 30 fps Video compression Smart H.265+ · H.265 · Smart H.264+ · H.264 · MPEG-4 · MJPEG Audio compression G.711a · G.711u · PCM · G.726 AI engine WizMind (industrial processor + built-in deep-learning modules) AcuPick Up to 32 channels (full licence) Face Detection (NVR) 4 channels · up to 12 face snapshots/sec each Face Recognition (NVR) 20 ch (FD by camera + FR by recorder, 20 fps) · or 4 ch (FD+FR by recorder, 12 fps) Face Database 40 databases · 300,000 images · 48 GB · gender / age / glasses / expression / mask / beard attributes Perimeter Protection 24 channels by NVR · 32 channels by camera · 10 IVS rules per channel SMD Plus 32 channels by NVR · 32 channels by camera (full licence both ways) Video Metadata (NVR) 8 channels (NVR-side processing — 6-Series exclusive) Video Metadata (Camera) 32 channels — human / motor / non-motor vehicle attributes ANPR (by camera) 32 channels · 20,000-plate database · blocklist / allowlist AI by Camera (passthrough) Face detection · Face recognition · Video metadata · SMD Plus · Stereo analysis · Crowd distribution · People counting · ANPR · Vehicle density · Object monitoring N+M cluster · iSCSI · eSATA Yes / Yes / Yes HDD bays 8 × SATA · up to 16 TB per drive (~128 TB max) · drawer-style hot-swap RAID modes RAID 0 · RAID 1 · RAID 5 · RAID 6 · RAID 10 Optional storage expansion Dahua ESS1504C 4-HDD eSATA storage tray Video output 4 × HDMI + 2 × VGA · HDMI1/2 up to 4K · HDMI3 up to 8K · HDMI4 up to 1080p · VGA1/2 up to 1080p · heterogeneous or simultaneous routing Multi-screen display Main screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 · Sub screen: 1 / 4 / 8 / 9 / 16 / 25 / 36 Audio I/O 1 × RCA in · 2 × RCA out Alarm I/O 16 × alarm in · 8 × alarm out USB 4 ports: 2 × front USB 2.0 + 2 × rear USB 3.0 Network ports 2 × RJ-45 Multi-Gigabit Ethernet (10 / 100 / 1000 / 2500 Mbps) · multi-address / load-balance / fault-tolerance bonding PoE None (use external PoE switch) RS-232 / RS-485 1 RS-232 · 1 RS-485 (A/B) eSATA 1 port (external archive) Network protocols HTTP / HTTPS · TCP/IP · IPv4 · RTSP · UDP · NTP · DHCP · DNS · SMTP · UPnP · DDNS · Alarm Server · Multicast · P2P · Auto Registration · iSCSI ONVIF Profile T / S / G · CGI · SDK · RTSP Third-party camera support ONVIF · RTSP · Sony · Axis · Arecont · Pelco · Canon · Samsung Mobile app DMSS (iOS / Android) Record modes Manual · alarm · motion detection · scheduled Backup Portable HDD · eSATA disk · burner · USB device · network Power supply 100 – 240 VAC · 50 / 60 Hz Power consumption < 18 W (without HDD) Operating temperature −10 °C to +55 °C Operating humidity 10% – 93% RH Dimensions 444 × 456.6 × 95 mm (2U) Net weight 6.4 kg (without HDD) Installation Rack or desktop Certifications FCC Part 15 Subpart B Class A · CE-EMC · CE-LVD Warranty 5 years (CCTV Guru Australia · WizMind series) Downloads & documentation Download official Dahua documents for setup, specifications, and recorder details. DHI-NVR608H-32-AI/ANZ Datasheet Dahua NVR Quick Start Guide Dahua NVR User Manual Dahua NVR HDD Installation Guide Frequently asked questions What's the difference between WizMind and WizSense? WizMind is Dahua's top-tier AI line — it uses an industrial-grade processor with built-in deep-learning modules and is aimed at enterprise, government, banking, healthcare and large-site deployments. WizSense is the SMB/commercial tier with a dedicated AI chip — capable but with smaller face databases, fewer NVR-side AI channels and lower bandwidth. The 6-Series WizMind has ~15× the face database capacity, 6× the NVR-side perimeter channels, 4× the SMD Plus channels, and 2.7× the bandwidth of the 5-Series WizSense flagship. Why doesn't it have built-in PoE? The 6-Series is purpose-built for enterprise headend deployments where cameras come in through a managed PoE switch (or stack of switches). The chassis priorities are storage capacity (8 HDDs with RAID and hot-swap), AI horsepower, video output count (4× HDMI) and uplink speed (2× 2.5 GbE) — not direct PoE delivery. Pair this NVR with a 24 or 48-port managed PoE+ switch. What does the 2.5 GbE network port mean for me? Each Ethernet port runs at 10/100/1000/2500 Mbps — 2.5× faster than the gigabit NICs on the 5-Series. Useful when the NVR is doing both heavy AI processing AND streaming to multiple clients, or when you want one cable between NVR and switch instead of bonded gigabit links. Most modern managed switches now support 2.5 GbE uplinks. What's the practical advantage of NVR-side video metadata? On the 5-Series WizSense range, metadata extraction happens at the camera — if you pair a non-Dahua camera, metadata search is disabled. The 6-Series WizMind runs metadata extraction at the recorder on 8 channels, so search-by-attribute (top colour, age, vehicle plate, etc.) works regardless of which camera generated the feed. Important when you've inherited a mixed-brand camera estate. Does the 8K HDMI mean I can run an 8K monitor? Yes — HDMI3 supports 8K (7680 × 4320) output for one display. HDMI1 and HDMI2 each support 4K (3840 × 2160). HDMI4 and the two VGAs are 1080p. Configure heterogeneous mode for independent layouts across all six display heads, or simultaneous mode to mirror outputs across paired HDMI+VGA. Should I run RAID 5, RAID 6 or RAID 10? RAID 5 (single-disk redundancy) gives ~112 TB usable across 8 × 16 TB drives — the typical default for surveillance. RAID 6 (dual-disk redundancy) gives ~96 TB usable but survives two simultaneous failures — recommended for compliance-critical sites. RAID 10 (mirror-of-stripes) gives ~64 TB usable but extremely fast playback — useful when the NVR drives the control-room wall directly. Does the WizMind series get a longer warranty? Yes — WizMind 6-Series enterprise NVRs ship with a 5-year warranty in Australia, two years longer than the 3-year warranty on Dahua's WizSense (4-Series and 5-Series) products. The longer cover reflects the project-grade build and is part of why WizMind units carry a premium over WizSense. Backed locally by CCTV Guru in Sydney with replacement stock on hand. Can it be rack-mounted? Yes — 2U / 444 mm wide fits a standard 19-inch rack with ears (rack ears sold separately). At 6.4 kg empty (without HDDs), plan for ~13–15 kg fully loaded with eight drives. The drawer-style HDD bays support hot-swapping, so you can replace failed drives without unmounting the chassis from the rack. 5-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less