Ubiquiti Authorised Reseller in Australia

Show previous products

• 

  Ubiquiti Ubiquiti UniFi USW-Flex 3-Pack — Managed Layer 2 Gigabit PoE Switch (USW-Flex-3)

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-Flex 3-Pack — Managed Layer 2 Gigabit PoE Switch (USW-Flex-3) The Ubiquiti UniFi USW-Flex is a compact, fully managed Layer 2 Gigabit switch built for flexible PoE deployments — and this listing includes a value 3-pack (USW-Flex-3). Each switch features five Gigabit ports with one PoE input and four auto-sensing 802.3af PoE outputs, a weatherproof housing for indoor or outdoor use, and full management through the UniFi Controller. Ideal for extending your UniFi network to cameras, access points, and IoT devices across homes, offices, and commercial sites anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5x Gigabit PoE Out 4x 802.3af Design Indoor / Outdoor Value 3-Pack Why Choose the UniFi USW-Flex 3-Pack? Managed Layer 2 Gigabit Switching Five Gigabit Ethernet ports deliver fast, reliable wired connectivity with full Layer 2 management — VLANs, QoS, and more — all configurable from the UniFi Controller. Flexible PoE In and Out One PoE input port powers the switch, while four ports offer auto-sensing 802.3af PoE output to power UniFi access points, cameras, and other PoE devices across your network. Up to 46W PoE Budget When powered by a 60W 802.3bt PoE++ source, the USW-Flex provides a maximum PoE output budget of 46W — enough headroom to run multiple downstream devices. Indoor / Outdoor Weatherproof Design A weatherproof housing lets the USW-Flex deploy indoors or outdoors, bringing managed PoE switching to locations a standard rack switch can’t reach. Versatile Mounting Install horizontally or vertically for desktop, magnetic wall-mount, or pole-mount setups — flexible placement for almost any environment. Seamless UniFi Integration Fully configurable through the UniFi Controller for single-pane-of-glass management alongside the rest of your UniFi network — no separate software required. Three Switches, One Pack This USW-Flex-3 listing bundles three switches — ideal for multi-room, multi-site, or larger PoE rollouts at better value than buying individually. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex (3-Pack: USW-Flex-3) Switching Managed, Layer 2 Network Ports 5x Gigabit Ethernet (1x PoE In, 4x PoE Out) PoE Output Auto-sensing 802.3af on 4 ports PoE Input 802.3bt PoE++ (60W) / 802.3af / 802.3at Max PoE Output Budget 46W (when powered by 60W 802.3bt PoE++) Design Indoor / outdoor, weatherproof housing Mounting Horizontal or vertical • desktop, magnetic wall-mount, pole-mount Management UniFi Controller Compliance NDAA compliant Pack Contents 3x USW-Flex switch Downloads & Resources USW-Flex Tech Specs USW-Flex Datasheet (PDF) Best For Camera & AP Deployments Power and connect UniFi cameras and access points at the edge with auto-sensing 802.3af PoE. Indoor & Outdoor Sites Weatherproof housing brings managed PoE switching to balconies, eaves, sheds, and outbuildings. Multi-Room & Multi-Site The 3-pack covers several rooms or locations from a single value purchase. UniFi Network Expansion Extend an existing UniFi network with managed Gigabit ports under one controller. Managed within the UniFi Controller alongside the rest of your UniFi network. Power the switch via an 802.3bt PoE++ source (up to 60W) for the full 46W PoE output budget. Mount horizontally or vertically — desktop, magnetic wall-mount, or pole-mount. Suited to indoor and outdoor installations thanks to the weatherproof housing. Frequently Asked Questions How many switches come in this listing? This USW-Flex-3 listing includes a 3-pack — three USW-Flex managed switches in one purchase. How is the USW-Flex powered? It is powered over its PoE input port. For the full 46W PoE output budget, power it from a 60W 802.3bt PoE++ source. Which devices can it power? Four ports provide auto-sensing 802.3af PoE output, ideal for UniFi access points, cameras, and other 802.3af PoE devices. Can it be used outdoors in Australia? Yes. The USW-Flex has a weatherproof housing designed for indoor or outdoor use, with flexible desktop, wall, and pole mounting. How is it managed? Fully through the UniFi Controller, so it integrates seamlessly with the rest of your UniFi network from a single interface. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $579.00

• Save -$16.55

  Ubiquiti Ubiquiti UniFi USW-48-PoE — 48-Port Managed Gigabit PoE+ Switch with 4x SFP & Touch Display (195W)

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48-PoE — 48-Port Managed Gigabit PoE+ Switch (195W) The Ubiquiti UniFi USW-48-PoE is a fully managed Gigabit Layer 2 switch built for serious networks — 48 Gigabit Ethernet ports with 32 auto-sensing 802.3at PoE+ ports, four 1G SFP fibre uplinks, and a silent fanless design. With 195W of total PoE budget, it powers UniFi access points, cameras, and phones over a single cable while a 1.3″ colour touchscreen keeps you in control on-device. Whether you're wiring an office, retail fit-out, school, or warehouse anywhere in Australia, the USW-48-PoE delivers enterprise switching with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 48x GbE + 4x SFP PoE+ Ports 32x 802.3at PoE Budget 195W Total Display 1.3″ Touch LCM Why Choose the UniFi USW-48-PoE? 48 Gigabit Ports, 32 with PoE+ Connect up to 48 Gigabit Ethernet devices, with 32 ports delivering auto-sensing 802.3af/at PoE+ (up to 32W per port) to power access points, cameras, and IP phones over a single cable. Four 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you Gigabit fibre uplink options to your core network — ideal for longer runs and segregating uplink traffic from access ports. 195W Total PoE Availability A 240W internal AC/DC power supply provides 195W of total PoE budget, comfortably running a full complement of UniFi APs and cameras across the rack. 1.3″ Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management shows real-time status and port info — no laptop required for quick checks. Silent Fanless Cooling A fanless cooling design keeps the switch completely silent — perfect for offices, retail counters, and other noise-sensitive spaces. Managed by UniFi Network Configure and monitor every feature from the UniFi Network application and mobile app — VLANs, port profiles, mirroring, and aggregation, all in one graphical interface from anywhere. Advanced Layer 2 Switching An extensive suite of Layer 2 protocols with selectable per-port operation mode (switching, mirroring, or aggregate) gives you flexible, enterprise-grade control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48-PoE Total Ports (48) 10/100/1000 RJ45 + (4) 1G SFP PoE+ Ports (32) GbE 802.3af/at PoE+ (Ports 1–32) Non-PoE Ports (16) GbE RJ45 Total PoE Availability 195W Max. PoE Wattage per Port 32W (802.3at) PoE Voltage Range 802.3af: 44–57V • 802.3at: 50–57V On-Device Display 1.3″ LCM colour touchscreen with AR switch management Management UniFi Network application + mobile app, Ethernet in-band Power Method 100–240VAC, 50/60 Hz, universal input Power Supply AC/DC, internal, 240W Max. Power Consumption (excl. PoE) 45W Cooling Fanless (silent) ESD / EMP Protection Air: ±16 kV • Contact: ±12 kV Shock & Vibration ETSI300-019-1.4 standard Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-48-PoE Datasheet Ubiquiti Installation Guide What's in the Box UniFi USW-48-PoE Switch 48-port managed Gigabit PoE+ switch with integrated 240W power supply. Rack-Mount Hardware Mounting brackets and screws for standard 19″ rack installation. Power Cable AC power cable for 100–240VAC universal input. Documentation Quick-start guide and installation instructions. Best For Offices & Corporate High-density desk connectivity with PoE+ powering UniFi APs, IP phones, and cameras. Retail & Hospitality Silent fanless operation suits front-of-house counters, registers, and quiet spaces. Schools & Campuses 48 Gigabit ports plus fibre uplinks scale across classrooms and shared infrastructure. Warehouses & Sites Centralised PoE for cameras and APs across large floor areas, managed from anywhere. Managed by the UniFi Network application — a UniFi Network host (Cloud Key, Dream Machine, or self-hosted controller) is recommended for full features. Mounts in a standard 19″ rack using the included brackets. 32 PoE+ ports (1–32) auto-sense 802.3af/at devices; remaining ports are data-only Gigabit. Use the four SFP ports for Gigabit fibre uplinks to your core or distribution switch. Frequently Asked Questions How many PoE ports does the USW-48-PoE have? 32 of the 48 Gigabit ports (ports 1–32) deliver auto-sensing 802.3af/at PoE+, up to 32W per port, with a total PoE budget of 195W. Do I need a separate controller? The switch is managed by the UniFi Network application. A UniFi Network host such as a Cloud Key, Dream Machine, or self-hosted controller is recommended to configure and monitor it. Is the USW-48-PoE fanless? Yes. It uses a silent fanless cooling design, making it well suited to offices, retail spaces, and other noise-sensitive environments. What are the SFP ports for? The four 1G SFP ports provide Gigabit fibre uplink options to your core or distribution network for longer runs and dedicated uplinks. Is the USW-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48-PoE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,164.95 $1,148.40

• Save -$1.80

  Ubiquiti Ubiquiti UniFi Switch Pro 48 — 48-Port Gigabit Layer 3 Managed Switch, 4x 10G SFP+ (USW-PRO-48)

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Pro 48 — 48-Port Gigabit Layer 3 Managed Switch with 4x 10G SFP+ (USW-PRO-48) The Ubiquiti UniFi Switch Pro 48 (USW-PRO-48) is a fully managed Layer 3 switch built for high-density UniFi deployments anywhere in Australia. It pairs 48 Gigabit RJ45 ports with four 10G SFP+ uplinks for link aggregation and increased availability, adds Layer 3 features such as inter-VLAN routing, static routing, and a DHCP server, and runs near-silent thanks to its intelligent cooling design. A 1.3″ touchscreen display and full UniFi Network integration make it an ideal aggregation or access-layer switch — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 48x Gigabit RJ45 Uplinks 4x 10G SFP+ Layer L2 & L3 Managed Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48? 48 Gigabit Ports for High Density Connect up to 48 devices over Gigabit RJ45 — APs, cameras, workstations, and servers — from a single 1U rack-mount switch, making it ideal for busy offices, schools, and commercial sites. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-capacity uplinks and link aggregation, delivering the bandwidth and redundancy needed for demanding aggregation and access-layer roles. Full Layer 2 & Layer 3 Routing Beyond rich Layer 2 switching, the Pro 48 adds Layer 3 functionality including inter-VLAN routing, static routing, and a DHCP server — consolidating network roles into one device. Near-Silent Cooling Innovative, intelligent cooling keeps the switch running near-silent, so it can be deployed in offices and quiet environments without disruptive fan noise. UniFi SmartPower RPS Redundancy A dedicated UniFi SmartPower RPS DC input supports redundant power, helping keep critical network infrastructure online if mains power is interrupted. 1.3″ Touchscreen Display An integrated 1.3″ touchscreen surfaces live status, port activity, and system information directly on the switch for quick at-a-glance monitoring. Managed by UniFi Network Configure and monitor virtually every feature from the UniFi Network controller or mobile app — an intuitive single-pane interface accessible from anywhere. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-PRO-48 Management Fully managed, Layer 2 & Layer 3 Gigabit RJ45 Ports 48 x Gigabit Ethernet (10/100/1000) SFP+ Uplinks 4 x 10G SFP+ Layer 3 Features Inter-VLAN routing, static routing, DHCP server Link Aggregation Supported (SFP+ uplinks) Display 1.3″ touchscreen Power Redundancy UniFi SmartPower RPS DC input Cooling Near-silent intelligent cooling Management Software UniFi Network controller & mobile app Form Factor Rack-mountable (1U) Compliance NDAA compliant Downloads & Resources USW-PRO-48 Datasheet UniFi Network Overview Best For Offices & Workplaces High-density Gigabit connectivity for desks, APs, and IP phones, managed centrally from UniFi Network. Schools & Campuses Layer 3 routing and 48 ports per switch make it ideal for segmented, multi-VLAN education networks. CCTV & AP Aggregation 10G SFP+ uplinks aggregate traffic from access switches, cameras, and wireless access points. Commercial & MDU Sites Near-silent cooling and RPS redundancy suit racks in busy commercial and multi-dwelling installs. Adopt into an existing UniFi Network deployment (UniFi controller, Cloud Key, or Dream Machine) for centralised management. Use the 4 x 10G SFP+ ports for high-capacity uplinks or link aggregation to your core/aggregation layer. Note: the USW-PRO-48 is a non-PoE switch — choose USW-Pro-48-PoE if your devices require PoE. Add a UniFi SmartPower RPS for redundant DC power on critical infrastructure. Frequently Asked Questions Does the USW-PRO-48 supply PoE? No. The USW-PRO-48 is a non-PoE managed switch. If you need to power PoE devices such as cameras or access points directly, choose the USW-Pro-48-PoE model instead. Is the Switch Pro 48 a Layer 3 switch? Yes. It is fully managed with Layer 2 and Layer 3 features including inter-VLAN routing, static routing, and a DHCP server. What do I need to manage it? A UniFi Network host — such as a Cloud Key, UniFi Dream Machine, or self-hosted controller — lets you configure and monitor the switch from the UniFi app or web interface. Can I use the SFP+ ports for redundancy? Yes. The four 10G SFP+ uplinks support link aggregation for higher capacity and increased availability between switches. Is the USW-PRO-48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the Switch Pro 48 is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,159.00 $1,157.20

• Save -$90.20

  Ubiquiti Ubiquiti UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch (USW-Pro-48-PoE)

   

  UniFi Switching — NDAA Compliant UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch with Touch Display (USW-Pro-48-PoE) The UniFi Switch Pro 48 PoE (USW-Pro-48-PoE) is a fully managed Layer 2 / Layer 3 access-layer switch built for demanding UniFi networks. It pairs (40) Gigabit PoE+ RJ45 ports, (8) Gigabit PoE++ RJ45 ports, and (4) 10G SFP+ uplinks with advanced routing — inter-VLAN routing, static routing, and a built-in DHCP server. With up to 600W of total PoE, a 1.3″ colour touchscreen, USP RPS power-redundancy input, and near-silent cooling, it's the ideal aggregation point for offices, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48x GbE + 4x 10G SFP+ PoE Budget 600W Total Switching Layer 2 + Layer 3 Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48 PoE? 48 Gigabit PoE Ports Power and connect up to 48 devices over a single cable each — (40) GbE PoE+ ports for APs, cameras, and phones, plus (8) GbE PoE++ (802.3bt) ports for high-draw devices like PTZ cameras and multi-radio access points. 600W Total PoE Budget A generous 600W PoE supply drives a full rack of powered devices, with USP RPS redundant-power input support to keep critical infrastructure online during a power-supply fault. Layer 3 Routing Built In Beyond a rich Layer 2 feature set, the Pro 48 PoE adds inter-VLAN routing, static routing, and a DHCP server — offload routing from your gateway and segment networks right at the access layer. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth uplinks and aggregation to the core, eliminating bottlenecks between switches, servers, and storage. 1.3″ Colour Touch Display An onboard 1.3″ LCM colour touchscreen with AR switch management surfaces port status, throughput, and uptime at a glance — no laptop required at the rack. Managed in UniFi Network Configure and monitor from anywhere through the powerful UniFi Network web and mobile app. Near-silent cooling keeps it quiet enough for offices and comms rooms alike. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Pro-48-PoE (Gen2) Management Fully managed, Layer 2 + Layer 3 PoE+ RJ45 Ports (40) GbE, 802.3at PoE+ PoE++ RJ45 Ports (8) GbE, 802.3bt PoE++ SFP+ Ports (4) 10G SFP+ Total PoE Power 600W Power Redundancy (1) USP RPS DC input Display 1.3″ LCM colour touchscreen with AR switch management Layer 3 Features Inter-VLAN routing, static routing, DHCP server Cooling Near-silent active cooling Management Software UniFi Network application, version 5.10.5 and later Compliance NDAA compliant Downloads & Resources USW-Pro-48-PoE Datasheet Ubiquiti Quick Start Guide Best For Offices & Workplaces Powers desk phones, APs, and cameras across a floor with PoE+ and PoE++ headroom to spare. Retail & Hospitality VLAN-segment guest, POS, and CCTV traffic with Layer 3 routing handled at the switch. CCTV Aggregation 48 PoE ports plus 10G SFP+ uplinks to a UniFi NVR make it an ideal camera access switch. Comms Rooms Near-silent cooling, a touch display, and USP RPS redundancy suit always-on infrastructure. Adopt and manage with the UniFi Network application (version 5.10.5 or later) via a UniFi gateway or Cloud Key. Mixes 802.3at PoE+ and 802.3bt PoE++ ports — check device draw against the 600W total budget. Add a UniFi SmartPower RPS (USP RPS) via the DC input for redundant-power protection. Use the (4) 10G SFP+ ports for high-bandwidth uplinks or aggregation to the network core. Frequently Asked Questions How much PoE power does the USW-Pro-48-PoE provide? It supplies up to 600W of total PoE across its 48 ports — (40) 802.3at PoE+ ports and (8) 802.3bt PoE++ ports for higher-draw devices. Does this switch support Layer 3 routing? Yes. It's a fully managed Layer 2 + Layer 3 switch with inter-VLAN routing, static routing, and a built-in DHCP server. What do I need to manage it? The UniFi Network application (version 5.10.5 or later), running on a UniFi gateway, Dream Machine, or Cloud Key. Configure and monitor from the web or mobile app anywhere. Can I add power redundancy? Yes. The USP RPS DC input lets you connect a UniFi SmartPower Redundant Power System to keep the switch running through a power-supply fault. What are the 10G SFP+ ports for? The four 10G SFP+ ports are high-bandwidth uplinks — ideal for aggregating to the core, linking switches, or connecting to a UniFi NVR or server. Is the USW-Pro-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $2,150.50 $2,060.30

• 

  Ubiquiti Ubiquiti airPRISM AP-5AC-90-HD 5GHz 3x30° High-Density Sector Antenna

   

  airMAX 5 GHz Sector — NDAA Compliant Ubiquiti airPRISM AP-5AC-90-HD — 5 GHz 3x30° High-Density Sector Antenna (AP-5AC-90-HD) The Ubiquiti airPRISM AP-5AC-90-HD is a 5 GHz high-density sector antenna that houses three Rocket5ac Prism radios to deliver three separate 30° beamwidth transmissions for 90° of total coverage. Engineered for point-to-multipoint deployments, its enhanced noise isolation and beam performance give clients a stronger signal with higher data rates on the less-congested 5 GHz band — ideal for dense WISP and enterprise wireless networks across Australia. Supplied with all mounting accessories and brackets, with genuine Ubiquiti stock and fast Australia-wide shipping. 3x30° = 90° HD Coverage Three independent 30° beamwidth sectors combine into 90° of high-density coverage, maximising client capacity in busy point-to-multipoint deployments. Houses Three Rocket5ac Prism Radios Mounts three Rocket5ac Prism radios in a single antenna, consolidating three sectors onto one tower position for cleaner, higher-density site layouts. Superior Noise Isolation Enhanced noise isolation and beam performance deliver a stronger, cleaner signal with higher data rates and reduced interference between sectors. All Mounting Hardware Included Ships with all mounting accessories and brackets, so it's ready to install on standard tower and mast hardware out of the box. Model AP-5AC-90-HD (airPRISM Sector) Frequency Band 5 GHz Coverage 3 x 30° sectors = 90° total Radios Supported Three Rocket5ac Prism radios Application High-density point-to-multipoint Mounting All mounting accessories & brackets included Compliance NDAA compliant AP-5AC-90-HD Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $859.99

• Save -$0.80

  Ubiquiti Ubiquiti UniFi USW-48 — 48-Port Managed Gigabit Switch with 4 SFP & Touch Display

   

  UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48 — 48-Port Managed Gigabit Switch with 4 SFP & Touch Display The Ubiquiti UniFi USW-48 is a fully managed 48-port Gigabit switch built for high-density networks that demand reliable, silent performance. With 48 GbE RJ45 ports, 4 dedicated 1G SFP fibre uplinks, and a fanless cooling design, it delivers enterprise-grade connectivity without the noise — ideal for offices, server rooms, retail sites, and large CCTV deployments anywhere in Australia. A built-in 1.3″ colour touchscreen and full integration with the UniFi Network application make managing your entire network effortless. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48× GbE RJ45 Uplinks 4× 1G SFP Display 1.3″ Touchscreen Cooling Silent Fanless Why Choose the UniFi USW-48? 48 Gigabit Ports Connect up to 48 devices over Gigabit Ethernet RJ45 — perfect for high-density offices, IP camera networks, access points, and workstations all from a single 1U switch. 4× 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you flexible fibre or copper uplinks to your core network or other switches, supporting longer runs and high-speed backbones. Silent Fanless Cooling A completely fanless design means zero fan noise — ideal for offices, reception areas, retail spaces, and any location where a quiet switch matters. 1.3″ Colour Touch Display The built-in 1.3″ LCM colour touchscreen with AR switch management shows live status and port info at a glance — no laptop needed for quick checks. UniFi Network Managed Fully managed through the UniFi Network application (Version 7.2.94 and later) for a single-pane view of your entire network — VLANs, monitoring, and configuration in one place. NDAA Compliant Manufactured by US-based Ubiquiti and NDAA Section 889 compliant — suitable for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48 Switching Layer Layer 2 managed RJ45 Ports 48× Gigabit Ethernet (GbE) SFP Ports 4× 1G SFP Display 1.3″ LCM colour touchscreen with AR switch management Cooling Fanless (silent) Management UniFi Network application (Version 7.2.94 and later) Compliance NDAA Section 889 compliant Downloads & Resources USW-48 Datasheet USW-48 Installation Guide Best For Offices & Workspaces High-density Gigabit connectivity for desks, phones, and access points — silent enough for the floor. CCTV & IP Camera Networks Aggregate dozens of cameras and recorders on one managed switch with VLAN segregation. Server & Comms Rooms Reliable 1U switching with SFP fibre uplinks to your core network backbone. Retail & Hospitality Centralised UniFi management across multiple sites with no monthly fees. Managed by the UniFi Network application (Version 7.2.94 or later) running on a UniFi console or self-hosted host. Use the 4× 1G SFP ports for fibre or copper uplinks to your core switch or gateway. Fanless design suits rack or shelf mounting in noise-sensitive environments. Note: the USW-48 is a non-PoE switch — use a PoE switch or injectors for powered devices. Frequently Asked Questions Does the USW-48 supply PoE? No. The USW-48 is a non-PoE Gigabit switch. For PoE devices such as cameras and access points, use a UniFi PoE switch or PoE injectors alongside it. How is the USW-48 managed? It is fully managed through the UniFi Network application (Version 7.2.94 and later), giving you a single-pane view of your network. The built-in touchscreen also shows live status. How many ports does it have? 48 Gigabit Ethernet RJ45 ports plus 4 dedicated 1G SFP ports for fibre or copper uplinks. Is it noisy? No. The USW-48 uses a completely fanless cooling design, so it runs silently — ideal for offices and other quiet spaces. Is the USW-48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48 is NDAA Section 889 compliant, suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $777.40 $776.60

• 

  Ubiquiti Ubiquiti USW-Flex-Mini 5-Pack — UniFi Managed Layer 2 Gigabit Switch (5x GbE, PoE/USB-C)

   

  UniFi Managed — NDAA Compliant Ubiquiti USW-Flex-Mini 5-Pack — UniFi Layer 2 Gigabit Switch (5x GbE, PoE / USB-C) The Ubiquiti USW-Flex-Mini is a fully managed, Layer 2 Gigabit switch with five GbE RJ45 ports in a compact, slim housing — and this value 5-pack is ideal for rolling out UniFi connectivity across desks, AV racks, IoT clusters, or small remote rooms. Each switch can be powered over PoE (802.3af, via Port 1) or with a USB-C adapter, and is monitored and configured anywhere through the UniFi Network app. Genuine Ubiquiti stock with fast Australia-wide shipping. Five Gigabit Ports (5) GbE RJ45 ports — including (1) 802.3af PoE input on Port 1 — in a slim, desk-friendly housing. Flexible Power Power each unit over PoE (802.3af) via Port 1, or with a USB-C 5V/1A adapter — no separate PSU run required. Fully Managed UniFi Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app. NDAA Compliant Ubiquiti is a US-based manufacturer — NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model USW-Flex-Mini (5-Pack) Switch Type Fully managed, Layer 2 Network Ports (5) GbE RJ45, including (1) 802.3af PoE input (Port 1) Power Method PoE (802.3af) via Port 1, or USB-C 5V/1A adapter Management UniFi Network web application & mobile app Housing Compact, slim desktop housing Pack Quantity 5 × USW-Flex-Mini Power Adapter USB-C adapter included only with single-pack units (no PSU in this 5-pack) Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $299.00

• Save -$108.26

  Ubiquiti Ubiquiti UniFi SmartPower Redundant Power System (USP-RPS) — 950W Rackmount

   

  UniFi SmartPower — NDAA Compliant Ubiquiti UniFi SmartPower Redundant Power System — 950W DC, 1U Rackmount (USP-RPS) The UniFi® SmartPower Redundant Power System (USP-RPS) is a proprietary redundant power supply that protects up to six UniFi SmartPower-supported devices from sudden power-supply-module failure. It continually monitors every attached device, and if an internal AC/DC power supply fails, failover is automatic — so your network keeps running with no interruption in service. With a 950W DC power budget it can back up a range of high-power gear, including UniFi PoE switches, and an integrated 1.3″ colour touchscreen displays live system information. Genuine Ubiquiti stock with fast Australia-wide shipping. Power Budget 950W DC Protected Devices Up to 6 Display 1.3″ Touchscreen Form Factor 1U Rackmount Why Choose the UniFi USP-RPS? Automatic, Hitless Failover The USP-RPS continually monitors every attached device. If an internal AC/DC power supply fails, failover is automatic — your network keeps operating with no interruption in service. 950W DC Power Budget A generous 950W DC budget backs up a variety of high-power UniFi gear, including UniFi PoE switches, across up to six connected devices. Protects Up to 6 Devices Six dedicated USP DC output ports let a single 1U unit safeguard an entire rack of UniFi SmartPower-supported equipment. 1.3″ Colour Touchscreen An integrated 1.3″ colour touchscreen LCM displays live system information at a glance for convenient on-site monitoring. Clean 1U Rackmount Design Ships with a 1U rackmount kit for tidy integration into standard 19″ network and server racks. UniFi Network Managed Managed directly through the UniFi Network Controller (v5.12.11 or later) alongside the rest of your UniFi infrastructure. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model USP-RPS Type UniFi SmartPower Redundant Power System Power Budget 950W DC Protected Devices Up to 6 UniFi SmartPower-supported devices DC Output Ports (6) USP DC output ports Network Interface (1) Ethernet port Display 1.3″ colour touchscreen LCM with status information Failover Automatic on internal AC/DC power-supply failure Form Factor 1U rackmountable (rackmount kit included) Management UniFi Network Controller v5.12.11 or later Compliance NDAA compliant Downloads & Resources USP-RPS Datasheet Ubiquiti Quick Start Guide What's in the Box UniFi USP-RPS Unit UniFi SmartPower Redundant Power System (USP-RPS). 1U Rackmount Kit Mounting hardware for standard 19″ racks. Documentation Quick-start guide and installation instructions. Not Included USP DC power cables and supported UniFi devices are sold separately. Best For Mission-Critical Racks Keep core UniFi switching and infrastructure online through power-supply failures. UniFi PoE Deployments Back up high-power UniFi PoE switches feeding cameras, APs, and phones. SMB & Enterprise Add redundancy to up to six devices from a single tidy 1U unit. Remote Sites On-unit touchscreen and UniFi Network management simplify monitoring. Mounts in any standard 19″ rack using the included 1U rackmount kit. Connect supported UniFi SmartPower devices to the six USP DC output ports. Adopt and manage through UniFi Network Controller v5.12.11 or later. Monitor live system status directly on the 1.3″ colour touchscreen. Frequently Asked Questions How many devices can the USP-RPS protect? Up to six UniFi SmartPower-supported devices via its six USP DC output ports. What is the power budget? 950W DC, enough to back up a range of high-power UniFi gear including UniFi PoE switches. How does failover work? The USP-RPS continually monitors attached devices and switches over automatically if an internal AC/DC power supply fails, with no service interruption. How is it managed? Through the UniFi Network Controller (version 5.12.11 or later), plus the on-unit 1.3″ colour touchscreen for local status. Does it fit a standard rack? Yes. It is 1U rackmountable and ships with the rackmount kit for any standard 19″ rack. Is the USP-RPS NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USP-RPS is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $937.25 $828.99

• 

  Ubiquiti Ubiquiti 5 GHz NanoStation ac Radio -Up to 450+ Mbps Real TCP/IP Throughput

   

  Ubiquiti 5 GHz NanoStation ac Radio5 GHz airMAX® ac RadioModels: NS-5AC, NS-5ACLUbiquiti® airMAX ac ProcessorUp to 450+ Mbps Real TCP/IP ThroughputDedicated Wi-Fi Radio for ManagementOverviewUbiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with theNanoStation® M.The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, alongwith integrated airMAX (MIMO TDMA protocol) technology and dedicatedWi-Fi management.The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy.SoftwareairOS® 8 is the revolutionary operatingsystem for Ubiquiti airMAX acproducts.Powerful Wireless Features:• Access Point PtMP airMAX MixedMode• airMAX ac Protocol Support• Long-Range Point-to-Point (PtP)Link Mode• Selectable Channel Width• PtP: 10/20/30/40/50/60/80 MHz• PtMP: 10/20/30/40 MHz• Automatic Channel Selection• Transmit Power Control:Automatic/Manual• Automatic Distance Selection(ACK Timing)• Strongest WPA2 SecurityUsability Enhancements:• airMagic® Channel Selection Tool• Dynamic Configuration Changes• Instant Input Validation• HTML5 Technology• Optimization for Mobile Devices• Detailed Device Statistics• Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView® Spectrum AnalyzerSpecifications:DimensionsWith MountWithout Mount257 x 84 x 30 mm (10.12 x 3.31 x 1.18")257 x 84 x 41 mm (10.12 x 3.31 x 1.61")Weight 233 g (8.22) ozPower Supply 24V, 0.5A Gigabit PoE Supply (Included)Max. Power Consumption 8.5WPower Method 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return)24V Passive PoE

  Read more less

   

  $249.00

• 

  Ubiquiti Ubiquiti PowerBeam AC Gen2 ISO 5 GHz airMAX Bridge — 25 dBi 400 mm (PBE-5AC-ISO-Gen2)

   

  airMAX ac — NDAA Compliant Ubiquiti PowerBeam AC Gen2 ISO — 5 GHz airMAX Bridge, 25 dBi, 400 mm (PBE-5AC-ISO-Gen2) The Ubiquiti PowerBeam AC Gen2 ISO (PBE-5AC-ISO-Gen2) is a high-performance 5 GHz airMAX® ac bridge built for long-range point-to-point and point-to-multipoint wireless links. Featuring a 400 mm dish with 25 dBi gain and an integrated radio isolator (ISO) horn that shields the antenna feed from off-axis noise, it delivers fast, stable throughput even in congested RF environments. Whether you're linking buildings, connecting a remote site, or extending a network across a property anywhere in Australia, the PowerBeam AC Gen2 ISO is enterprise-grade airMAX hardware with genuine Ubiquiti stock and fast Australia-wide shipping. Frequency 5 GHz airMAX ac Antenna Gain 25 dBi Interface Gigabit Ethernet Power Passive PoE (Included) Why Choose the PowerBeam AC Gen2 ISO? airMAX ac Custom Silicon Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability, providing hardware acceleration to the airMAX scheduler for the high data rates and dense modulation of airMAX ac technology. 25 dBi 400 mm Dish The powder-coated SPCC dish reflector and UV-stabilised feed deliver 25 dBi of gain for reliable long-distance links, with a focused beam that maximises range and signal stability. Integrated ISO Isolation The integrated radio isolator (ISO) horn shields the antenna feed from off-axis interference and noise, improving performance in noisy, co-located, and high-density deployments. Gigabit Connectivity A single 10/100/1000 Ethernet port carries both data and power, while front-panel LEDs give at-a-glance power, link, and 4-segment signal-strength feedback for easy alignment. Flexible Channel Widths Supports PtP channels of 10/20/30/40/50/60/80 MHz and PtMP channels of 10/20/30/40 MHz, letting you tune bandwidth and spectrum use to each link. Simple PoE Deployment Ships with a 24V, 0.5A Gigabit PoE adapter and pole-mount kit. Just 8.5 W max consumption keeps running costs and power runs minimal at remote sites. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive networks where supply-chain integrity is a requirement. Technical Specifications Model PBE-5AC-ISO-Gen2 Frequency 5 GHz — airMAX® ac Antenna Gain 25 dBi Processor MIPS 74Kc Memory 64 MB Networking Interface (1) 10/100/1000 Ethernet Port LEDs Power, Ethernet, (4) Signal Strength Channel Sizes (PtP) 10 / 20 / 30 / 40 / 50 / 60 / 80 MHz Channel Sizes (PtMP) 10 / 20 / 30 / 40 MHz Power Supply 24V, 0.5A Gigabit PoE Adapter (Included) Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 20 to 26 VDC Max. Power Consumption 8.5 W Enclosure — Antenna Feed Outdoor UV-Stabilized Plastic Enclosure — Dish Reflector Powder-Coated SPCC Mounting Pole-Mounting Kit (Included) Dimensions 459 × 459 × 261 mm (18.07 × 18.07 × 10.28″) Weight (Mount Included) 3.22 kg (7.10 lbs) Compliance NDAA compliant Downloads & Resources PBE-5AC-ISO-Gen2 Datasheet Ubiquiti Quick Start Guide What's in the Box PowerBeam AC Gen2 ISO Radio PBE-5AC-ISO-Gen2 with 400 mm 25 dBi dish and integrated ISO isolator horn. Gigabit PoE Adapter 24V, 0.5A Gigabit PoE power adapter included. Pole-Mount Kit Mounting hardware for pole installation included. Not Included Outdoor Ethernet cable and a second radio (for a complete link) are sold separately. Best For Building-to-Building Links Bridge two sites with a stable, high-throughput 5 GHz airMAX ac connection. Remote Sites & Cameras Backhaul CCTV and network traffic from sheds, gates, and outbuildings with no trenching. Rural & Acreage Extend internet and network across large Australian properties where cabling isn't practical. WISP & PtMP Deploy as a CPE in point-to-multipoint networks with flexible channel widths. Deploy in pairs for a point-to-point link, or as a CPE against an airMAX ac base station for PtMP. Powered by the included 24V Gigabit PoE adapter — no separate power supply required at the radio. Mounts to a pole using the included kit; align using the 4-segment signal-strength LEDs. Configured through Ubiquiti airOS® for channel width, output power, and link tuning. Frequently Asked Questions How many PowerBeam units do I need for a link? A point-to-point link needs two radios — one at each end. For point-to-multipoint, each remote site uses one PowerBeam as a CPE talking to a central base station. What does the ISO version add? The ISO model includes an integrated radio isolator horn that shields the antenna feed from off-axis interference, improving performance in noisy and co-located RF environments. Is a power supply included? Yes. A 24V, 0.5A Gigabit PoE adapter and pole-mount kit are included in the box. You'll need to supply outdoor-rated Ethernet cable. What gain does the antenna provide? The 400 mm dish provides 25 dBi of gain, suited to medium and long-range 5 GHz airMAX ac links. Is the PowerBeam AC Gen2 ISO NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this radio is NDAA Section 889 compliant — suitable for government and security-sensitive networks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $242.00

• Save -$4.60

  Ubiquiti Ubiquiti IsoStation 5AC — 5GHz airMAX ac Radio, Interchangeable Horn Antennas (IS-5AC)

   

  UISP — NDAA Compliant Ubiquiti IsoStation 5AC — 5 GHz airMAX ac Radio with Interchangeable Horn Antennas (IS-5AC) The Ubiquiti IsoStation 5AC (IS-5AC) is a 5 GHz airMAX® ac radio built for high-performance point-to-point and point-to-multipoint wireless links, delivering up to 450+ Mbps real TCP/IP throughput. Its modular, interchangeable horn antennas let you shape the beam precisely for your deployment, while a shielded all-metal radio base and a built-in management Wi-Fi radio make installation and co-location simple. Ideal for WISPs, rural connectivity, and site-to-site bridging across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Throughput 450+ Mbps Band 5 GHz airMAX ac Antennas 30/45/60/90° Horns Setup Management Wi-Fi Why Choose the Ubiquiti IsoStation 5AC? 450+ Mbps airMAX ac Throughput Powered by Ubiquiti's airMAX® ac technology, the IS-5AC supports up to 450+ Mbps real TCP/IP throughput — plenty of bandwidth for backhaul, CPE, and multipoint distribution links. Interchangeable Horn Antennas The horn antenna is fully interchangeable for precise beam-shaping. Choose 30°, 45°, 60°, or 90° horns to match your deployment — the IsoStation gets maximum gain out of the smallest footprint. Optimised for Co-Location Asymmetrical 60° and 90° horns have naturally attenuated side lobes and extremely low back radiation, delivering industry-leading front-to-back ratio. Symmetrical 30° and 45° horns suit dense cluster-sector installs. Improved Noise Immunity The IsoStation blocks or spatially filters out noise, dramatically improving noise immunity — especially valuable in crowded RF environments with many signals on the same or similar frequency. Built-In Management Wi-Fi Radio A separate, integrated management Wi-Fi radio lets you set up and configure the IsoStation fast and easily straight from your mobile device — no extra cabling or tools required. All-Metal Shielded Build An all-metal, shielded radio base with a metal strap for quick pole-mounting makes the IS-5AC fast to install and rugged enough for demanding outdoor wireless sites. High MAC Efficiency High MAC efficiency delivers approximately ±80% PHY rate throughput, so you get more usable bandwidth out of every link. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model IS-5AC (IsoStation 5AC) Technology airMAX® ac Operating Frequency 5 GHz Throughput Up to 450+ Mbps real TCP/IP Included Antenna 45° isolation horn antenna Optional Antennas Interchangeable 30°, 60°, and 90° horns (sold separately) Management Built-in management Wi-Fi radio for mobile setup Antenna Release Single-button release for quick antenna swaps Construction All-metal, shielded radio base Mounting Metal strap for quick pole-mounting MAC Efficiency High — approx. ±80% PHY rate throughput Noise Immunity Improved — blocks / spatially filters out RF noise Compliance NDAA Section 889 compliant Downloads & Resources IS-5AC Datasheet Ubiquiti Tech Specs Best For WISP Backhaul High-throughput 5 GHz airMAX ac links for wireless ISPs and rural network operators across Australia. Sector / Cluster Sites Symmetrical 30° and 45° horns suit dense cluster-sector deployments with high co-location demands. Point-to-Multipoint Asymmetrical 60° and 90° horns shape coverage for multipoint distribution to client devices. Noisy RF Environments Improved noise immunity keeps links reliable in busy, signal-crowded urban and industrial areas. Ships with a 45° isolation horn antenna; optional 30°, 60°, and 90° horns available for custom beam-shaping. Single-button antenna release makes swapping horns quick and tool-free. Metal pole-mount strap allows fast installation on standard masts and poles. Use the built-in management Wi-Fi radio to configure the unit from your phone during setup. Frequently Asked Questions What throughput does the IsoStation 5AC deliver? Using airMAX ac technology, the IS-5AC supports up to 450+ Mbps of real TCP/IP throughput on the 5 GHz band. Which antenna is included? The IsoStation 5AC ships with a 45° isolation horn antenna. Optional 30°, 60°, and 90° horns are available separately for specific beam-shaping needs. How do I set it up? The IsoStation integrates a separate management Wi-Fi radio, so you can connect and configure it quickly and easily straight from your mobile device. What's the difference between the horn antenna angles? Symmetrical 30° and 45° horns are ideal for cluster-sector installs with high co-location requirements; asymmetrical 60° and 90° horns narrow the elevation pattern to boost gain where it's needed. Is the IsoStation 5AC NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the IS-5AC is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $232.30 $227.70

• 

  Ubiquiti Ubiquiti EdgePoint EP-S16 — 16-Port Outdoor WISP Switch with PoE & SFP+

   

  EdgePoint WISP Switch — NDAA Compliant Ubiquiti EdgePoint EP-S16 — 16-Port Outdoor WISP Switch with PoE & SFP+ (EP-S16) The Ubiquiti EdgePoint EP-S16 is a rugged, outdoor-rated WISP switch built for wireless ISPs, tower sites, and demanding network installations across Australia. It combines 16 RJ45 Ethernet ports and two SFP+ ports with versatile PoE input/output, ESD power protection, and advanced Layer 2/3 features — all in a weather-ready enclosure with FiberProtect strain relief and integrated cabling management. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x RJ45 + 2x SFP+ Power Dual PoE In/Out Protection ESD + Outdoor Management EdgeOS L2/L3 Why Choose the Ubiquiti EdgePoint EP-S16? 16 RJ45 + 2 SFP+ Ports Sixteen RJ45 Ethernet ports plus two high-speed SFP+ ports give you the density and fibre uplink capacity needed for tower sites, distribution points, and growing WISP networks. Flexible Dual PoE Input/Output All sixteen RJ45 ports support PoE. Two ports accept 54V passive PoE input or deliver 54/24V output, two more provide 54/24V passive output, and twelve deliver PoE+ or 24V passive output — powering APs, radios, and devices directly. Advanced Layer 2 & Layer 3 Features Run MSTP/RSTP/STP, VLAN, Private VLAN, Voice VLAN, Link Aggregation, DHCP & IGMP Snooping, plus static and policy-based routing for a fully managed network core. Enterprise Security & QoS Built-in TACACS+, RADIUS, 802.1X, MAC Filtering and ACL secure access, while DiffServ and CoS prioritise traffic for VoIP and critical services. FiberProtect & Cable Management FiberProtect strain relief safeguards fibre strands, while a cable sleeve (conduit-ready), cable-tie slots, and ground bonding point keep outdoor installs tidy and reliable. Built for Outdoor Tower Sites A pole-mount bracket (wall-mount bracket also included), lanyard loop for safe installation, and a slot for an optional PicoStationM2HP make it ideal for WISP and tower deployments. NDAA Compliant Fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive networks where supply-chain integrity is required. Technical Specifications Model EP-S16 (EdgePoint) Data Ports 16x RJ45 Ethernet ports • 2x SFP+ ports Console 1x Console Port Power Input 54VDC, 6A Terminal Block • Dual PoE Input PoE — Dual-Option Ports 2x ports: 54V, 1.5A Passive PoE Input or 54/24V, 1.4A Passive PoE Output* PoE — Output Ports 2x 54/24V, 1.4A Passive PoE Output* PoE — PoE+ Ports 12x PoE+ or 24V, 0.7A Passive PoE Output Ports* Switching Features MSTP/RSTP/STP • VLAN, Private VLAN, Voice VLAN • Link Aggregation • DHCP Snooping, IGMP Snooping Security TACACS+, RADIUS, 802.1X, MAC Filtering, ACL QoS DiffServ, CoS Routing Static Routing, Policy-Based Routing Cabling Protection FiberProtect strain relief • cable sleeve (conduit option) • cable-tie slots Mounting Pole-mount bracket & wall-mount bracket included • lanyard loop Expansion Slot for PicoStationM2HP (not included) for wireless Grounding Ground bonding point • ESD power protection Compliance NDAA compliant *Passive PoE — ensure connected devices support the listed voltage before use. Downloads & Resources EP-S16 Tech Specs (ui.com) Ubiquiti EdgePoint Quick Start Guide Best For WISP Tower Sites Power and aggregate multiple radios and APs from a single outdoor-ready switch with dual PoE input/output. Distribution Points SFP+ fibre uplinks and 16 RJ45 ports make it ideal for neighbourhood and campus distribution nodes. Managed Networks Full L2/L3 feature set — VLANs, routing, RADIUS, ACLs — for businesses needing a managed network core. Remote & Outdoor Installs ESD protection, grounding, and FiberProtect keep links stable in exposed Australian outdoor environments. Powered via 54VDC, 6A terminal block or dual PoE input — confirm your power source before connecting. Pole-mount and wall-mount brackets are included; use the lanyard loop for safe at-height installation. Use FiberProtect strain relief and the ground bonding point for reliable, surge-protected outdoor links. Passive PoE output ports require devices rated for the listed 54V/24V voltage — verify compatibility. Frequently Asked Questions Is the EP-S16 suitable for outdoor use? Yes. The EdgePoint EP-S16 is built for outdoor WISP and tower deployments, with ESD power protection, a ground bonding point, FiberProtect strain relief, and pole/wall mounting hardware included. How many ports does it have? It provides 16 RJ45 Ethernet ports and 2 SFP+ ports, plus a console port and a 54VDC terminal block for power. Can it both receive and supply PoE? Yes. Two ports accept 54V passive PoE input or output 54/24V, two more output 54/24V, and twelve deliver PoE+ or 24V passive output — so it can be PoE-powered and power downstream devices. Does it support VLANs and routing? Yes. It supports VLAN, Private VLAN and Voice VLAN, MSTP/RSTP/STP, link aggregation, plus static and policy-based routing for advanced managed networks. Is the EP-S16 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the EP-S16 is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $1,019.99

• 

  Ubiquiti Ubiquiti airFiber X 5GHz 34dBi Dish Antenna - Slant 45 (AF-5G34-S45)

   

  airFiber X Antenna — NDAA Compliant Ubiquiti airFiber X 5 GHz 34 dBi Dish Antenna — Slant 45° (AF-5G34-S45) The Ubiquiti airFiber X AF-5G34-S45 is a high-gain 5 GHz dish antenna purpose-built for long-range point-to-point links with airFiber radios. Its Slant 45° signal angle helps avoid interference in dense RF environments, while a rugged outdoor design delivers 34 dBi of gain across the 5.10–5.90 GHz range. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's an ideal upgrade for wireless backhaul links anywhere in Australia. Model AF-5G34-S45 (airFiber X Dish Antenna) Frequency Range 5.10–5.90 GHz Gain 34 dBi Polarization Slant 45° (interference avoidance) Dimensions 1050 × 1050 × 421 mm (41.34 × 41.34 × 16.57″) Weight 13.5 kg (29.76 lb) Construction Robust outdoor-rated design Compatibility Seamless integration with airFiber X radios Included Universal Pole Mount, airFiber X Radio Bracket, Weatherproof RF Connectors Compliance NDAA compliant High 34 dBi Gain Delivers the power needed for robust, long-range point-to-point links across the full 5.10–5.90 GHz band. Slant 45° for Interference Avoidance The slant 45° signal angle optimises performance and minimises co-channel interference in busy RF environments. Built for Outdoors Rugged construction stands up to harsh Australian conditions for reliable, year-round wireless backhaul. Mount Included Ships with a Universal Pole Mount, airFiber X Radio Bracket, and weatherproof RF connectors for a seamless install. AF-5G34-S45 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $629.99

• Save -$11.40

  Ubiquiti Ubiquiti airMAX 2.4 GHz Sector Antenna - 90 Degree 16 dBi (AM-2G16-90)

   

  Ubiquiti airMAX — NDAA Compliant Ubiquiti airMAX 2.4 GHz Sector Antenna — 90° 16 dBi (AM-2G16-90) The Ubiquiti airMAX AM-2G16-90 is a carrier-class 2.4 GHz sector antenna delivering 16 dBi of gain across a 90° coverage sector — purpose-built to pair with a Ubiquiti Rocket airMAX base station for point-to-multipoint (PtMP) wireless links. With advanced RF isolation for superior noise immunity and a complete set of mounting accessories and brackets included, it is ready to deploy on towers, rooftops, and masts across Australia. Genuine Ubiquiti stock with fast AU-wide shipping. 90° Sector Coverage A 90° sector beamwidth concentrates signal where you need it, making it ideal for PtMP base-station deployments serving multiple subscriber stations. 16 dBi High Gain 16 dBi of gain on the 2.4 GHz band extends range and improves link reliability for wireless ISP and bridging applications. Rocket-Ready Design Designed to mate directly with a Ubiquiti airMAX Rocket radio for a clean, integrated base-station build with proven airMAX performance. All Brackets Included Ships with the full mounting kit and brackets, so it is ready to install on a mast or pole straight out of the box. Model AM-2G16-90 Frequency Band 2.4 GHz (airMAX) Gain 16 dBi Sector Coverage 90° Antenna Type Sector (point-to-multipoint) Pairs With Ubiquiti airMAX Rocket base station Mounting Pole / mast — all brackets & accessories included Compliance NDAA compliant AM-2G16-90 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $236.90 $225.50

• 

  Ubiquiti Ubiquiti AM-5G19-120 airMAX Sector Antenna — 5 GHz 19 dBi 120° (Mounts Included)

   

  airMAX Sector — NDAA Compliant Ubiquiti AM-5G19-120 airMAX Sector Antenna — 5 GHz 19 dBi 120° (AM-5G19-120) The Ubiquiti AM-5G19-120 airMAX Sector Antenna is a carrier-class 5 GHz point-to-multipoint (PtMP) base-station antenna delivering 19 dBi gain across a wide 120° sector over the 4.9–5.9 GHz band. Purpose-built to pair with Ubiquiti Rocket airMAX radios, it features advanced RF isolation for clean co-location of multiple sectors on a single tower, and ships with all mounting accessories and brackets included. Genuine Ubiquiti stock with fast shipping right across Australia. 19 dBi High-Gain Sector Strong, focused 5 GHz coverage for reliable PtMP links to airMAX client devices across a wide service area. 120° Wide Coverage A 120° horizontal sector lets you cover a large arc with a single antenna — combine three for full 360° tower coverage. Advanced RF Isolation Carrier-class design improves noise immunity and co-location, allowing multiple sectors to operate together on the same tower. All Mounts Included Ships complete with mounting accessories and brackets — pairs with Ubiquiti Rocket airMAX radios for a fast PtMP deployment. Technical Specifications Model AM-5G19-120 Type airMAX Sector Antenna (PtMP base station) Frequency Range 4.9 – 5.9 GHz Gain 19 dBi Sector Coverage 120° Compatibility Ubiquiti Rocket airMAX radios Mounting All mounting accessories & brackets included Compliance NDAA compliant Downloads & Resources AM-5G19-120 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $249.99

• 

  Ubiquiti Ubiquiti UniFi Aggregation Switch — 8-Port 10G SFP+ Layer 2 Managed, Fanless 1U (USW-Aggregation)

   

  UniFi — NDAA Compliant Ubiquiti UniFi Aggregation Switch — 8-Port 10G SFP+ Layer 2 Managed, Fanless 1U (USW-Aggregation) The Ubiquiti UniFi Aggregation Switch (USW-Aggregation) is a managed Layer 2 switch built for high-bandwidth interconnects, delivering eight 10G SFP+ ports in a silent, fanless 1U rackmount chassis. With link aggregation for greater capacity and availability, it's the ideal backbone aggregation layer for any UniFi deployment — whether you're wiring a home lab, office, retail site, or commercial network anywhere in Australia. Centrally managed through the UniFi Network application, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 8 × 10G SFP+ Switching Capacity 160 Gbps Form Factor Fanless 1U Management Layer 2 Managed Why Choose the UniFi Aggregation Switch? Eight 10G SFP+ Ports Eight high-bandwidth 10G SFP+ ports provide a dedicated aggregation layer for high-speed interconnects between switches, servers, and UniFi gear — perfect for collapsing multiple links into one fast backbone. Link Aggregation for Capacity & Availability Bond multiple ports together to increase total throughput and add redundancy, so a single link failure won't take your network down — built for resilient interconnect topologies. 160 Gbps Switching Capacity Up to 80 Gbps non-blocking throughput, 160 Gbps switching capacity, and a 119.04 Mpps forwarding rate keep data moving without bottlenecks across demanding workloads. Silent Fanless Design A completely fanless 1U chassis runs silently and reliably — ideal for offices, studios, and quiet environments where rack noise is a concern, with no moving parts to fail. Copper & Fibre Flexibility The built-in 36 W power supply supports copper Ethernet UF-RJ45-10G modules (sold separately) in all eight ports, so you can mix 10G fibre and copper to match your run. UniFi Network Management Configure, monitor, and manage the switch from the UniFi Network application alongside the rest of your UniFi stack — one pane of glass, no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model USW-Aggregation Ports 8 × 10G SFP+ Switching Type Managed Layer 2 Gigabit Ethernet switch Total Non-Blocking Throughput 80 Gbps Switching Capacity 160 Gbps Forwarding Rate 119.04 Mpps Copper Module Support UF-RJ45-10G modules (sold separately) in all 8 ports Management Interface Ethernet in-band Power Method Universal AC input: 100–240 VAC, 50/60 Hz Power Supply AC/DC, internal, 36 W Max. Power Consumption 30 W ESD/EMP Protection Air: ±16 kV • Contact: ±12 kV Enclosure Material SGCC steel Dimensions 442.4 × 120 × 43.7 mm (17.42 × 4.72 × 1.72″) • 1U rackmount Weight 2.65 kg without mount • 2.74 kg with mount Cooling Fanless (silent) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Aggregation Datasheet UniFi Aggregation Quick Start Guide Best For Network Backbones Aggregate 10G uplinks from multiple access switches into a single high-speed core. Servers & NAS Deliver fast, low-latency 10G connectivity to storage, NVRs, and virtualisation hosts. Offices & Studios Silent fanless operation suits quiet workspaces, edit suites, and home racks. UniFi Deployments Slots into any UniFi network as a dedicated aggregation layer, managed centrally. Managed through the UniFi Network application alongside the rest of your UniFi stack. All eight ports accept 10G SFP+ fibre transceivers; copper runs use UF-RJ45-10G modules (sold separately). Standard 1U rackmount with included mounting hardware; fanless for silent operation. Universal 100–240 VAC internal power supply — no external brick required. Frequently Asked Questions What is the USW-Aggregation used for? It's a Layer 2 aggregation switch with eight 10G SFP+ ports, designed to bond high-bandwidth links and serve as a fast backbone between switches, servers, and other UniFi gear. Does it support copper 10G connections? Yes. With UF-RJ45-10G copper Ethernet modules (sold separately), all eight ports can run copper instead of fibre — the internal 36 W supply powers them in every port. Is the switch fanless? Yes. The USW-Aggregation is completely fanless, running silently with no moving parts — ideal for quiet offices, studios, and home racks. How is it managed? It's managed through the UniFi Network application, giving you central control and monitoring alongside your other UniFi devices with no licensing fees. Does it provide PoE? No. The USW-Aggregation is an SFP+ aggregation switch and does not output PoE. Use a UniFi PoE switch for powering cameras and access points. Is the USW-Aggregation NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Aggregation is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $549.99

• Save -$1.75

  Ubiquiti Ubiquiti Rocket 5AC Lite airMAX ac BaseStation (R5AC-Lite)

   

  airMAX ac BaseStation — NDAA Compliant Ubiquiti Rocket 5AC Lite airMAX ac BaseStation (R5AC-Lite) The Ubiquiti Rocket 5AC Lite (R5AC-Lite) is a 5 GHz carrier-class airMAX® ac BaseStation built for high-performance Point-to-Point (PtP) backhaul and Point-to-MultiPoint (PtMP) deployments. Powered by Ubiquiti's airMAX ac chipset and a dedicated airPrism™ spectral analysis radio, it delivers 500+ Mbps of real TCP/IP throughput and scales to 50+ clients on a single sector. Pairs with an airMAX ac sector antenna or RocketDish for long-range links across homes, farms, ISP networks, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Band 5 GHz airMAX ac Throughput 500+ Mbps Capacity 50+ Clients Spectrum airPrism Radio Why Choose the Rocket 5AC Lite? Carrier-Class airMAX ac Performance Ubiquiti's airMAX ac technology delivers 500+ Mbps of real outdoor TCP/IP throughput with low latency — ideal for long-distance PtP backhaul and high-capacity PtMP sectors. Dedicated airPrism Spectral Filtering A separate airPrism™ active RF filtering radio isolates signals in congested environments, dramatically improving co-location performance at busy tower sites. Scales to 50+ Clients A single Rocket 5AC Lite sector serves 50+ airMAX clients, making it a cost-effective hub for wireless ISPs, estates, and multi-building campuses. Flexible PtP & PtMP Modes Deploy as a Point-to-Point backhaul bridge or a Point-to-MultiPoint base station — one radio covers both roles for maximum versatility. Pairs with airMAX ac Antennas Mounts directly to Ubiquiti airMAX ac sector antennas and RocketDish reflectors for tailored coverage and range, from wide sectors to focused long-haul links. Simple Gigabit PoE Install Powered over a single Ethernet run via the included 24V Gigabit PoE adapter — no separate power supply at the tower, with full management through airOS. Managed in UISP & airOS Configure, monitor, and maintain your links from airOS and Ubiquiti's UISP platform — with airControl-style oversight and no recurring licence fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model R5AC-Lite Type 5 GHz airMAX® ac BaseStation / radio Frequency Band 5 GHz Wireless Technology airMAX® ac with dedicated airPrism™ active RF filtering Throughput 500+ Mbps (real TCP/IP) Client Capacity 50+ airMAX clients Operating Modes Point-to-Point (PtP) & Point-to-MultiPoint (PtMP) Network Interface Gigabit Ethernet (RJ45) Power Method Passive PoE — 24V, 0.5A Gigabit PoE adapter (included) Management airOS® / UISP Antenna Compatibility airMAX ac sector antennas & RocketDish reflectors (sold separately) Regulatory FCC ID: SWX-R5ACL • IC: 6545A-R5ACL Compliance NDAA Section 889 compliant Downloads & Resources R5AC-Lite Tech Specs R5AC-Lite Quick Start Guide What's in the Box Rocket 5AC Lite (R5AC-Lite) 5 GHz airMAX ac BaseStation radio unit. Gigabit PoE Adapter 24V, 0.5A Gigabit PoE power adapter included. Mounting Hardware Mounting strap and screws for antenna attachment. Not Included An airMAX ac antenna (sector or RocketDish) and Ethernet cable are required and sold separately. Best For Wireless ISPs High-capacity PtMP sectors serving 50+ subscribers from a single tower-mounted base station. PtP Backhaul Reliable 500+ Mbps point-to-point bridges between buildings, sites, and remote properties. Rural & Farms Extend connectivity across large rural Australian properties where cabling is impractical. Campus & Estates Link multiple buildings or sheds wirelessly with carrier-class airMAX ac performance. Requires a compatible airMAX ac antenna — an airMAX ac sector antenna for PtMP or a RocketDish for PtP (sold separately). Powered by the included 24V Gigabit PoE adapter over a single Ethernet run. Configured and managed through airOS; monitor multiple links centrally in Ubiquiti UISP. Use a shielded outdoor Cat5e/Cat6 cable and ground the link for tower and rooftop installs. Frequently Asked Questions Does the Rocket 5AC Lite include an antenna? No. The R5AC-Lite is the radio only. You pair it with an airMAX ac sector antenna for PtMP or a RocketDish reflector for PtP links, sold separately. What's the difference between the Lite and the Prism version? Both share airMAX ac and airPrism technology. The Prism (Rocket 5AC Prism) adds higher-performance filtering for the most congested, co-located tower environments. How is it powered? Via the included 24V Gigabit PoE adapter — a single Ethernet cable carries both power and data to the radio. Can it run Point-to-Point and Point-to-MultiPoint? Yes. The Rocket 5AC Lite supports both PtP backhaul and PtMP base-station modes, configured in airOS. Is the Rocket 5AC Lite NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the R5AC-Lite is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $242.65 $240.90

• Save -$4.26

  Ubiquiti Ubiquiti airMAX 5 GHz Dual-Omni 13 dBi Antenna — AMO-5G13

   

  airMAX Omni — NDAA Compliant Ubiquiti airMAX 5 GHz Dual-Omni 13 dBi Antenna (AMO-5G13) The Ubiquiti AMO-5G13 is a carrier-class 5 GHz omni-directional antenna delivering 2x2 dual-polarity, omni-directional MIMO performance with 13 dBi of gain. Designed for seamless integration with Ubiquiti airMAX Rocket radios, it provides 360° coverage for point-to-multipoint base stations, making it ideal for WISP towers, campus and rural broadband distribution, and wide-area wireless networks across Australia. Supplied with all mounting accessories and brackets, with genuine Ubiquiti stock and fast Australia-wide shipping. 2x2 Dual-Polarity MIMO Dual-polarity design delivers true 2x2 MIMO throughput when paired with a compatible airMAX Rocket radio, maximising capacity and link reliability. 360° Omni Coverage Omni-directional radiation pattern provides all-round 5 GHz coverage from a single mast — perfect for point-to-multipoint base stations serving clients in every direction. Seamless Rocket Integration Engineered to mount directly to Ubiquiti airMAX Rocket hardware for a clean, weather-sealed base-station build with no extra adapters. Complete Mounting Kit Ships with all brackets and mounting accessories included, so it's ready to deploy on towers and poles straight out of the box. Technical Specifications Model AMO-5G13 Frequency Range 5 GHz Gain 13 dBi Polarity Dual-polarity (2x2 MIMO) Radiation Pattern Omni-directional (360°) Compatibility Ubiquiti airMAX Rocket radios Mounting All brackets & mounting accessories included Compliance NDAA compliant Downloads & Resources AMO-5G13 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $293.25 $288.99

• 

  Ubiquiti Ubiquiti 5GHz airFiber Dish 23dBi Slant 45 degree signal angle for optimum interference avoidance

   

  5GHz airFiber Dish, 23dBi, Slant 45 Universal Pole Mount, airFiber X Radio Bracket, and Weatherproof RF Connectors Included

  Read more less

   

  $185.90

• 

  Ubiquiti Ubiquiti UniFi Cat6 Patch Cable 0.22m Blue — Ultra-Thin Bendable RJ45 (U-Cable-Patch-RJ45-BL)

   

  UniFi Patch Cable — NDAA Compliant UniFi Cat6 Patch Cable 0.22m Blue — Ultra-Thin Bendable RJ45 (U-Cable-Patch-RJ45-BL) The UniFi Patch Cable (U-Cable-Patch-RJ45-BL) is a genuine Ubiquiti ultra-thin Cat6 RJ45 patch lead built for clean, high-density UniFi installs. At just 3 mm in diameter with booted ends that bend up to 90 degrees, it keeps switch and patch-panel cabling tidy where space is tight. The compact 0.22 m (220 mm) length is ideal for switch-to-switch and rack interconnects. Genuine Ubiquiti stock with fast shipping right across Australia. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter routes neatly through dense racks and behind UniFi switches without adding bulk. 90° Bendable Booted Ends Both RJ45 connectors flex up to 90 degrees, letting cables sit flush against gear and reducing strain on the port. Cat6 Performance Cat6-rated copper supports Gigabit Ethernet for reliable switch, AP, and device interconnects. Genuine UniFi Accessory Colour-coded blue to match Ubiquiti’s cabling system and keep your rack organised at a glance. Technical Specifications Model U-Cable-Patch-RJ45-BL Type Cat6 RJ45 Ethernet patch cable Connectors RJ45 to RJ45, booted — bendable up to 90° on both ends Cable Length 0.22 m (220 mm) Outer Diameter Ultra-thin 3 mm Colour Blue Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $6.95

• Save -$1.16

  Ubiquiti Ubiquiti POE-24 Gigabit PoE Adapter — 24V DC PoE Injector with Surge Protection

   

  Ubiquiti — NDAA Compliant Ubiquiti POE-24 Gigabit PoE Adapter — 24V DC PoE Injector with Surge Protection The Ubiquiti POE-24 is a genuine 24V DC Gigabit PoE adapter that delivers both power and data to compatible Ubiquiti devices over a single Ethernet cable. Built with surge, clamping and ESD protection plus an AC cable with earth ground, it helps guard your equipment against the leading cause of outdoor device failures. NDAA Section 889 compliant and backed by genuine Ubiquiti stock, it ships fast Australia-wide from CCTV Guru. Output 24V DC LAN Port Gigabit Protection Surge & ESD Compliance NDAA 24V DC Gigabit Power Supplies 24V DC power and Gigabit data over a single Ethernet cable to compatible Ubiquiti devices — no separate power run required. Built-In Surge & ESD Protection Difference and common-mode surge protection, clamping protection (11V data, 60V power) and an earthed AC cable help defend against the leading cause of outdoor device failures. Remote Reset & Reset Button On-board reset button and remote reset capability make it easy to power-cycle and recover connected devices. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installations across Australia. Model Ubiquiti POE-24 (24V PoE Adapter) Output Voltage 24V DC Rated Input 100–240V AC @ 50/60 Hz LAN Port Gigabit (RJ45 shielded socket) Reset Reset button + remote reset capability Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power AC Connector IEC-320 C6 (earthed AC cable) Operating Temperature 0 to 40°C Certifications CE, FCC, IC, UL Compliance NDAA compliant POE-24 Datasheet (ui.com) Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $33.06 $31.90

• 

  Ubiquiti Ubiquiti Gigabit PoE++ Adapter 50V 60W (POE-50-60W)

   

  Genuine Ubiquiti PoE++ Adapter Ubiquiti Gigabit PoE++ Adapter — 50V 60W (POE-50-60W) The Ubiquiti POE-50-60W is a high-power 50VDC Gigabit PoE++ adapter that delivers up to 60 W (50V @ 1.2A) of power and data over a single Ethernet cable — ideal for powering airFiber radios, high-draw UniFi devices, and other 50V Ubiquiti hardware. With a Gigabit LAN port, four-pair powering, and built-in surge protection, it keeps your gear running reliably. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Model POE-50-60W (PoE++ Adapter) Output Voltage 50V DC @ 1.2A (60 W) Rated Input 100–240V AC @ 50/60Hz Input Current 1.3A @ 120V AC • 0.75A @ 230V AC Gigabit LAN Port Yes Powering 4-pair — Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (−) Data In / PoE RJ45 shielded socket AC Connector IEC-320 C6 Efficiency 85+% Surge Protection Difference & common mode • 1500A (8/20 μs) max surge discharge Clamping Protection 11V data, 60V power Dimensions / Weight 101 × 60 × 33 mm • 192 g Operating Temperature 0 to 40°C, 5–90% non-condensing Certifications CE, FCC, IC, UL 60W of 50V Power Delivers a full 50V DC @ 1.2A (60 W) over Ethernet to power demanding airFiber and 50V Ubiquiti hardware from a single outlet. Gigabit + 4-Pair Powering A Gigabit LAN port and four-pair powering carry both full-speed data and high-current power down one shielded RJ45 run. Built-In Surge Protection Difference and common-mode surge protection with up to 1500A discharge helps shield connected equipment from spikes. POE-50-60W Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $60.50

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 5m Blue — Ultra-Thin Bendable RJ45 Cat6 Ethernet (U-Cable-Patch-5M-RJ45-BL)

   

  UniFi Patch Cable — 5 m Blue UniFi Patch Cable 5 m Blue — Ultra-Thin Bendable RJ45 Ethernet (U-Cable-Patch-5M-RJ45-BL) The UniFi Patch Cable (U-Cable-Patch-5M-RJ45-BL) is Ubiquiti's ultra-thin 5 m blue patch lead with a slim 3 mm jacket and two bendable booted RJ45 connectors that flex up to 90° for clean, tidy runs in tight racks, wall plates, and UniFi camera installs. It supports Gigabit Ethernet (GbE) and up to PoE+++ over stranded 30 AWG copper, and passes the TIA/EIA-568-B.2 channel test. Genuine Ubiquiti stock with fast Australia-wide shipping. Ultra-Thin 3 mm Jacket A slim 3 mm TPE jacket bundles neatly and routes through tight spaces where standard patch leads won't fit. Bendable Booted RJ45 Both ends flex up to 90° for clean cable management at switches, patch panels, and UniFi cameras. GbE + PoE+++ Ready Supports Gigabit Ethernet and up to PoE+++, ideal for powering UniFi APs, cameras, and access points. Fluke-Tested Performance Passes the TIA/EIA-568-B.2 channel test on stranded 30 AWG copper for reliable, standards-compliant links. Technical Specifications Model U-Cable-Patch-5M-RJ45-BL (UniFi Patch Cable family: U-Cable-Patch-RJ45) Length 5 m (16.4 ft) Colour Blue Connectors (2) Bendable booted RJ45 Supported Data Rate Gigabit Ethernet (GbE) Supported PoE Up to PoE+++ Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Bend Radius Min. 24 mm (0.94″) Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Flame Rating FT-2 (UL1581) Operating Environment Indoor Operating Temperature −10°C to 75°C Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $18.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 5m Black — Ultra-Thin Cat6 RJ45, Bendable Booted Connectors (U-Cable-Patch-5M-RJ45-BK)

   

  UniFi Patch Cable — NDAA Compliant UniFi Patch Cable 5 m Black — Ultra-Thin Cat6 RJ45 with Bendable Booted Connectors (U-Cable-Patch-5M-RJ45-BK) The UniFi Patch Cable (U-Cable-Patch-5M-RJ45-BK) is a 5-metre, ultra-thin black Ethernet patch lead built for tidy, professional UniFi installs. Its 3 mm jacket and bendable booted RJ45 connectors — flexible up to 90° on both ends — let you route cables cleanly behind racks, switches, and access points without strain. Tested to TIA/EIA-568-B.2 Cat6 channel standards for reliable Gigabit (GbE) performance, it's genuine Ubiquiti stock with fast Australia-wide shipping. Ultra-Thin 3 mm Jacket A slim 3 mm thermoplastic elastomer (TPE) jacket keeps cable runs neat and unobtrusive — ideal for high-density patch panels and rack management. Bendable Booted RJ45 Both connectors flex up to 90° for clean, strain-free routing in tight spaces behind switches, gateways, and access points. Cat6 GbE Performance Passes TIA/EIA-568-B.2 Cat6 channel testing by Fluke for dependable Gigabit Ethernet and PoE delivery. NDAA Compliant Genuine Ubiquiti accessory, NDAA Section 889 compliant for government, defence, and security-sensitive sites. Technical Specifications Model U-Cable-Patch-5M-RJ45-BK (U-Cable-Patch-RJ45 family) Length 5 m Colour Black Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Type Up to PoE+++ Connectors (2) Bendable booted RJ45 Operating Environment Indoor Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding Type UTP Conductor Stranded copper, 30 AWG Min. Bend Radius 24 mm (0.94″) Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Flame Rating FT-2 (UL1581) Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $18.00

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 3m Blue — Bendable Booted RJ45 Cat6 Ethernet Cable (U-Cable-Patch-3M-RJ45-BL)

   

  UniFi Patch Cable — NDAA Compliant UniFi Patch Cable 3m Blue — Bendable Booted RJ45 Cat6 (U-Cable-Patch-3M-RJ45-BL) The Ubiquiti UniFi Patch Cable is an ultra-thin 3 m Cat6 Ethernet lead in blue, finished with two bendable booted RJ45 connectors that flex up to 90° for clean, tidy runs in switch cabinets, racks, and tight wall plates. With a slim 3 mm TPE jacket, GbE data support, and PoE+++ pass-through, it’s the genuine accessory for any UniFi switch, access point, camera, or gateway install. Stocked in Australia with fast AU-wide shipping. Bendable Booted RJ45 Both connectors bend up to 90°, easing strain and keeping patch panels and rack runs neat without snapping retention clips. Ultra-Thin 3 mm Jacket A slim thermoplastic-elastomer (TPE) jacket over 30 AWG stranded copper routes easily through congested cabinets and conduit. GbE + PoE+++ Ready Supports Gigabit Ethernet and PoE up to PoE+++, powering and connecting UniFi APs, cameras, and switches over a single tested Cat6 lead. Cat6 Tested & NDAA Compliant Built to TIA/EIA-568-B.2 and ISO/IEC 11801 standards, and NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model U-Cable-Patch-3M-RJ45-BL Length 3 m (9.9 ft) Colour Blue Connectors (2) Bendable booted RJ45 Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Up to PoE+++ Category Cat6 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Min. Bend Radius 24 mm (0.94″) Flame Rating FT-2 (UL1581) Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Operating Environment Indoor Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $12.10

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 2m Blue — Ultra-Thin Cat6 RJ45 Ethernet Cable (U-Cable-Patch-2M-RJ45-BL)

   

  UniFi — NDAA Compliant Ubiquiti UniFi Patch Cable 2m Blue — Ultra-Thin Cat6 RJ45 Ethernet Cable (U-Cable-Patch-2M-RJ45-BL) The UniFi Patch Cable (U-Cable-Patch-2M-RJ45-BL) is a genuine Ubiquiti 2 metre Cat6 RJ45 ethernet patch lead in blue, built with an ultra-thin 3 mm outer diameter and bendable booted RJ45 connectors that flex to 90° for clean, tidy runs in racks, wall plates, and tight spaces. Tested to pass the TIA-568-B.2 Cat6 Channel test by Fluke, it delivers reliable multi-gigabit performance for any UniFi or standard network deployment. Genuine Ubiquiti stock with fast Australia-wide shipping. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter takes up less space than standard patch leads — ideal for high-density patch panels and neat cable management. Bendable Booted RJ45 Both connectors feature bendable boots that flex up to 90°, easing strain relief and routing around corners and behind equipment. Cat6 Fluke-Tested Passes the TIA-568-B.2 Cat6 Channel test by Fluke for dependable multi-gigabit throughput on UniFi and standard networks. Technical Specifications Model U-Cable-Patch-2M-RJ45-BL Cable Length 2 m Colour Blue Category Cat6 Connectors RJ45 — bendable booted, flex to 90° Outer Diameter 3 mm (ultra-thin) Performance Passes TIA-568-B.2 Cat6 Channel test by Fluke Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $14.00

• 

  Ubiquiti Ubiquiti airMAX LiteBeam AC 5 GHz Long-Range Station, 450+ Mbps Throughput, 26dBi Gain, 2x2 MIMI Antenna, airOS 8

   

  The LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI.Features:Improved Radio DesignImproved MountingImproved Surge ProtectionManagement WiFi Radio/UISP mobile appAirOS 8UISP mobile app for Android and IOSNow with airOS®8 and airView®airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.High-Gain, Directional AntennaThe LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial DesignFeaturing the freedom of three-axis alignment, the LiteBeamM fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.Compact in Size, Light in WeightA lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics.SPECIFICATION Dimensions 512 x 385.75 x 258.3 mm (20.18 x 15.19 x 10.17") Weight Without Mount: 1.360 kg (2.998 lb), With Mount 1.735 kg (3.825 lb) Power Supply 24V, 0.3A Gigabit PoE Adapter (Included) Max. Power Consumption 7W Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 24V ± 10% Gain 26 dBi Networking Interface (1) 10/100/1000 Ethernet Port Processor Specs MIPS 74Kc Memory 64 MB DDR2 LEDs Power, Ethernet Channel Sizes PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz Enclosure Characteristics Reflector (Aluminium) / Plastic: PC Mounting Pole-Mounting Kit (Included) Wind Loading 550 N @ 200 km/h (123.6 lbf @ 125 mph) Wind Survivability 200 km/h (125 mph) ESD/EMP Protection ± 24 kV Contact / Air Operating Temperature -40 to 70° C (-40 to 158° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC

  Read more less

   

  $207.00

• Save -$6.00

  Ubiquiti Ubiquiti UniFi Access NFC Card (UA-Card) — Secure Door Access Credentials

   

  UniFi Access — NDAA Compliant Ubiquiti UniFi Access NFC Card (UA-Card) — Secure Door Access Credentials The UniFi Access Card (UA-Card) is a highly secure NFC credential for the UniFi Access door-control system. Built on MIFARE DESFire EV3 with Ubiquiti's proprietary security protocol, each card delivers fast, contactless tap-to-unlock at any UniFi Access reader — with multi-layer encryption that resists malicious duplication. Available as a 10-Pack (Black, UA-Card-B-10) or 100-Pack (White, UA-Card-W-100) for offices, multi-tenant buildings, schools, and commercial sites. Genuine Ubiquiti stock with fast shipping Australia-wide. MIFARE DESFire EV3 Security Multi-layer encryption plus the UniFi Access proprietary security protocol guards against card cloning and unauthorised duplication. Tap-to-Unlock Contactless 13.56 MHz NFC lets staff and visitors unlock doors with a simple tap at any compatible UniFi Access reader. Centrally Managed — No Licence Fees Assign, revoke, or reissue cards instantly in the UniFi Access app. Lost cards are disabled in seconds with no rekeying and no subscription fees. NDAA Compliant NDAA Section 889 compliant from US-based Ubiquiti — suitable for government and security-sensitive deployments. Technical Specifications Model UA-Card (10-Pack Black: UA-Card-B-10 / 100-Pack White: UA-Card-W-100) NFC Technology MIFARE DESFire EV3 + UniFi Access Proprietary Security Protocol NFC Frequency 13.56 MHz Compatibility UniFi Access readers, managed via the UniFi Access application Format ISO 7810 ID-1 (standard credit-card size) Dimensions 85.6 × 53.98 × 0.84 mm Weight 5 g Pack Options 10-Pack • 20-Pack • 100-Pack Compliance NDAA compliant Certifications Anatel Downloads & Resources UA-Card Datasheet UA-Card Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $75.00 - $588.00

• 

  Ubiquiti Ubiquiti airFiber 5XHD (AF-5XHD) — 5 GHz Carrier PtP Backhaul Radio, 1.34 Gbps & 100 km

   

  airFiber LTU — Carrier Backhaul Ubiquiti airFiber 5XHD — 5 GHz Carrier PtP Backhaul Radio, 1.34 Gbps & 100 km Range (AF-5XHD) The Ubiquiti airFiber 5XHD (AF-5XHD) is Ubiquiti's first LTU™ carrier-class radio, engineered from the ground up for the Wireless ISP industry. Operating in the licence-free 5 GHz band, it delivers up to 1.34 Gbps of real throughput over distances of 100 km+, with industry-leading 21.2 bps/Hz spectral efficiency and ultra-low 1.5–3.5 ms latency. Whether you're building a long-range Point-to-Point backhaul for a WISP, enterprise campus, or remote site anywhere in Australia, the AF-5XHD pairs with airFiber X or RocketDish antennas for a complete, noise-resilient link. Genuine Ubiquiti stock with fast Australia-wide shipping. Throughput 1.34 Gbps Range 100 km+ Band 5 GHz LTU Weatherproof IP67 Why Choose the Ubiquiti airFiber 5XHD? Custom LTU Silicon Ubiquiti's purpose-built airFiber LTU IC surpasses the limits of generic Wi-Fi chipsets, delivering low latency, long range, DFS flexibility, higher-order modulation, and superior receive sensitivity for the WISP industry. Up to 1.34 Gbps Real Throughput Line-rate packet processing and 21.2 bps/Hz spectral efficiency deliver up to 1.34 Gbps of real data throughput with 4096QAM, plus innovative xtreme Range Technology (xRT™). Adaptive Modulation up to 4096QAM Adaptive modulation rates scale up to 4096QAM (firmware 1.1.2+), letting operators push links far beyond 256QAM and increase speed with a simple software upgrade. Flexible Channel Widths & Split TX/RX Selectable channel widths from 10 to 100 MHz with independent TX and RX frequency and bandwidth configuration let you avoid local interference and scale capacity efficiently. GPS Synchronisation & Co-Location Precise GPS frame sync frees the radio from interference for superior co-location, ideal where tower space is limited. Configurable 2, 2.5, 4 and 5 ms frames stay compatible with airMAX networks. Dual Redundant Gigabit PoE Two Gigabit Ethernet ports provide redundant PoE power for fail-safe uptime, while built-in Bluetooth enables quick wireless configuration in the field. AlignLock & Persistent Spectrum Analysis AlignLock™ alerts you if aiming shifts from tampering, impact, or storm damage, while a dedicated RX runs real-time full-band airView® spectral analysis without dropping the link. IP67 Build & AES-256 Security An included IP67 upgrade kit seals out dust and water across a wide −40°C to 55°C range, with enhanced surge protection and AES-256 link encryption for carrier-grade reliability. Technical Specifications Model AF-5XHD (airFiber 5XHD) Processor airFiber LTU IC Operating System airOS® LTU Maximum Throughput 1.34 Gbps (4096QAM, firmware 1.1.2+) Maximum Range 100 km Latency 1.5–3.5 ms (2 ms frame) Packets per Second 2+ Million (hardware bridge mode) Wireless Mode PtP Master / Slave Operating Frequency 4800–6200 MHz (worldwide, region-dependent) Channel Bandwidth 10 / 20 / 30 / 40 / 50 / 60 / 80 / 100 MHz selectable Max. Modulation Adaptive up to 4096QAM Max. Conducted TX Power 29 dBm (region-dependent) Encryption AES-256 Data Port (1) 10/100/1000 Ethernet Management Port (1) 10/100/1000 Ethernet Bluetooth v4.0 (wireless configuration) RF Connectors (2) RP-SMA weatherproof (CH0, CH1) • (1) SMA weatherproof (GPS) GPS Antenna External, magnetic base Power Supply 24V, 1A Gigabit PoE Adapter (included) Power Method Passive PoE Supported Voltage Range +18 to +54V DC (depends on cable length) Max. Power Consumption 6–12 W Mounting airFiber X Mount (Rocket Mount compatible) • GPS pole mount (included) Weatherproofing IP67 (after included upgrade kit) Operating Temperature −40°C to 55°C Dimensions / Weight 224 × 82 × 48 mm • 0.35 kg Certifications CE, FCC, IC Downloads & Resources airFiber 5XHD Datasheet (PDF) Best For WISP Backhaul Carrier-grade 5 GHz PtP links delivering gigabit capacity over long distances for Wireless ISP networks. Enterprise & Campus Bridge buildings, sites, and remote facilities with a high-throughput, low-latency wireless link instead of trenching fibre. Tower Co-Location GPS sync and clean power output let multiple radios share crowded tower footprints without self-interference. Rural & Remote Connectivity Reach across valleys, farms, and remote Australian sites where running cable is impractical or impossible. Requires two AF-5XHD radios (one Master, one Slave) plus compatible antennas to form a complete PtP link. Pairs with airFiber X antennas (AF-5G23/30/34-S45) or RocketDish RD-5G30/RD-5G34 via the included Universal Bracket / conversion kit. Includes 24V Gigabit PoE adapter, GPS pole mount, and IP67 upgrade kit. Configure wirelessly over Bluetooth or manage via airOS LTU and UNMS™. Frequently Asked Questions How many AF-5XHD radios do I need for a link? A Point-to-Point backhaul requires two AF-5XHD radios — one set as Master and one as Slave — each paired with a compatible airFiber X or RocketDish antenna. What throughput and range can it achieve? Up to 1.34 Gbps of real throughput (with 4096QAM on firmware 1.1.2+) over distances of up to 100 km, depending on antennas and environmental conditions. Which antennas are compatible? airFiber X slant-polarised antennas (AF-5G23-S45, AF-5G30-S45, AF-5G34-S45) and RocketDish RD-5G30 / RD-5G34 using the included bracket or the AF-5G-OMT-S45 conversion kit. Is it weatherproof for Australian outdoor sites? Yes. An included IP67 upgrade kit and a −40°C to 55°C operating range, plus enhanced surge protection, suit harsh Australian tower and rooftop deployments. How is it powered and configured? It ships with a 24V 1A Gigabit PoE adapter and supports dual redundant Gigabit Ethernet ports. Configure wirelessly via built-in Bluetooth, airOS LTU, or the UNMS app. Does it support GPS synchronisation? Yes. Configurable GPS frame sync (2, 2.5, 4, 5 ms frames) enables interference-free co-location and is compatible with other synchronous airMAX systems. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $761.20

• 

  Ubiquiti Ubiquiti Switch Enterprise 48-port PoE+ 48x2.5GbE Ports, Ideal For Wi-Fi 6 AP, 4x 10g SFP+ Ports For Uplinks, Managed Layer 3 Switch

   

  The Switch Enterprise 48 PoE (USW Enterprise 48 PoE) is a fully managed switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports, (4) 10G SFP+ ports, and a 720W total PoE supply. Along with its Layer 3 functionality, this switch offers an extensive suite of Layer 2 switching protocols, including port-specific operation modes (switching, mirroring, or aggregate).The USW Enterprise 48 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the USW Enterprise 48 PoE offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (48) 2.5GbE, 802.3at PoE+ RJ45 ports (4) 10G SFP+ ports (1) USP RPS DC input 720W total PoE supply Layer 3 switching features Mechanical Dimensions 442 x 44 x 400 mm (17.4 x 1.7 x 15.7") Weight Without Mount: 6.2 kg (13.67 lb) With Mount: 6.3 kg (13.89 lb) Enclosure Material SGCC Steel Mount Material SGCC Steel Hardware Total Non-Blocking Throughput 160 Gbps Switching Capacity 320 Gbps Forwarding Rate 238.095 Mpps Max Power Consumption (Excluding PoE Output) 150W Power Method (1) Universal AC input, 100-240VAC, 10A Max, 50/60 Hz (1) USP-RPS DC input, 52VDC, 13.84A; 11.5VDC, 13A Power Supply AC/DC, Internal, 100-240V, 10A Max. Management Interface Ethernet In-Band Networking Interfaces (48) 100MbE/1GbE/2.5GbE RJ45 port SFP+ Interfaces (4) 1/10G SFP+ ports PoE Interfaces (48) PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) Total Available PoE 720W Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range 802.3af Mode 44 to 57V Voltage Range 802.3at Mode 50 to 57V Services SMB Layer 3 PoE Gigabit Ethernet Switch ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Downloads Datasheet Installation Guide

  Read more less

   

  $3,268.99

• 

  Ubiquiti Ubiquiti UniFi Patch Cable 1m Blue — Ultra-Thin Cat6 RJ45 Ethernet (U-Cable-Patch-1M-RJ45-BL)

   

  UniFi Accessory — NDAA Compliant UniFi Patch Cable 1m Blue — Ultra-Thin Cat6 RJ45 Ethernet (U-Cable-Patch-1M-RJ45-BL) The UniFi Patch Cable 1m (Blue) is a genuine Ubiquiti ultra-thin Cat6 patch lead with a slim 3 mm jacket and bendable booted RJ45 connectors on both ends, letting you route clean 90° bends into tight racks, wall plates, and UniFi gear. It delivers full Gigabit (GbE) performance and supports PoE+++, making it ideal for linking UniFi switches, cameras, access points, and gateways. Genuine Ubiquiti stock with fast shipping right across Australia. Model U-Cable-Patch-1M-RJ45-BL (UniFi Patch Cable) Length 1 m Colour Blue Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Type Up to PoE+++ Connectors (2) Bendable booted RJ45 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Min. Bend Radius 24 mm (0.94″) Operating Environment Indoor Flame Rating FT-2 (UL1581) Standards TIA/EIA-568-B.2 • ISO/IEC 11801 Operating Temperature −10°C to 75°C Compliance NDAA compliant Bendable Booted RJ45 Both connectors bend up to 90° for clean cable management in tight racks, wall plates, and behind UniFi equipment. Ultra-Thin 3 mm Jacket A slim TPE jacket bundles easily and frees up space in high-density patch panels and enclosures. Gigabit & PoE+++ Tested to TIA/EIA-568-B.2 Cat6 with full GbE throughput and PoE+++ support for cameras, APs, and switches. UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $12.99

• Save -$7.85

  Ubiquiti Ubiquiti UFiber SFP+ Single-Mode 10G BiDi Module 2-Pack - UACC-OM-SM-10G-S-2

   

  UniFi Fiber — NDAA Compliant Ubiquiti UFiber SFP+ Single-Mode 10G BiDi Module (UACC-OM-SM-10G-S-2, 2-Pack) The Ubiquiti UFiber SFP+ Single-Mode 10G BiDi Module delivers a full 10 Gbps link over a single strand of single-mode fiber, halving the cable you need for long-distance backbone runs. Using bidirectional (BiDi) wavelengths, one fiber patch lead now carries two separate links — ideal for switch-to-switch uplinks, building-to-building backhaul, and ISP/UISP deployments anywhere in Australia. Supplied as a matched 2-pack (one blue, one red) of genuine Ubiquiti stock with fast Australia-wide shipping. Full 10 Gbps over One Fiber BiDi technology sends and receives on different wavelengths over a single single-mode strand, so you get full 10 Gbps throughput while using half the fiber of a traditional dual-strand link. 10 km Reach & LC Connector A single LC connector and single-mode optics carry the link up to 10 km — perfect for campus, building-to-building, and long-haul backbone connections. Matched 2-Pack (Blue & Red) Each pack includes a paired blue and red module with complementary TX/RX wavelengths, so a single fiber patch lead can carry two separate links. NDAA Compliant Manufactured by US-based Ubiquiti and NDAA Section 889 compliant — suitable for government, defence, and security-sensitive networks. Technical Specifications Model / SKU UACC-OM-SM-10G-S-2 (2-pack) Supported Media Single-mode fiber Connector Type 1x LC BiDi Yes TX Wavelength 1270 nm (Blue) / 1330 nm (Red) RX Wavelength 1330 nm (Blue) / 1270 nm (Red) Data Rate 10 Gbps SFP+ Cable Distance Up to 10 km Quantity 2-pack (matched blue + red) Compliance NDAA compliant Downloads & Resources UniFi SFP & Fiber Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $320.85 $313.00

• 

  Ubiquiti Ubiquiti UFiber SFP+ Multi-Mode Fiber Module, 10 Gbps, 300m Distance, 20-Pack

   

  Ubiquiti U Fiber Multi-Mode Module 10G 20-packSupported Media:Multi-Mode FiberConnector Type:2x LCTX Wavelength:850 nmRX Wavelength:850 nmData Rate:10 Gbps SFP+Cable Distance:300m

  Read more less

   

  $682.00

• Save -$10.45

  Ubiquiti Ubiquiti airMAX Sector AM-5G20-90 5 GHz 20 dBi 90° BaseStation Antenna - Brackets Included

   

  Ubiquiti airMAX — NDAA Compliant Ubiquiti airMAX Sector AM-5G20-90 — 5 GHz 20 dBi 90° BaseStation Antenna The Ubiquiti airMAX Sector AM-5G20-90 is a carrier-class 5 GHz point-to-multipoint (PtMP) base-station antenna delivering 20 dBi of gain across a 90° sector with advanced RF isolation for high client capacity and reduced interference. Built around 2×2 dual-polarity MIMO and designed to pair with Ubiquiti Rocket airMAX radios, it’s an ideal upgrade for wireless ISPs, rural links, and large-site coverage anywhere in Australia. Every unit ships with all mounting accessories and brackets included, backed by genuine Ubiquiti stock and fast Australia-wide shipping. 20 dBi, 90° Sector Coverage High-gain sectorized design delivers strong, focused 90° coverage for dense point-to-multipoint deployments. 2×2 Dual-Polarity MIMO Dual-linear polarisation and advanced RF isolation maximise throughput and minimise co-location interference. Pairs with Rocket airMAX Radios Designed to snap directly onto Ubiquiti Rocket M5 / Rocket 5AC radios for a fast, clean base-station build. All Mounting Hardware Included Rugged pole-mount brackets and fixings are in the box, ready for tower and rooftop installs across Australia. Technical Specifications Model AM-5G20-90 (airMAX Sector 5G-20-90) Frequency Range 4.9 – 5.9 GHz Gain 20 dBi Beamwidth 90° sectorized (HPOL & VPOL) Polarization Dual-linear (2×2 MIMO) Antenna Type 2×2 MIMO BaseStation sector antenna Compatible Radios Ubiquiti Rocket airMAX (e.g. Rocket M5 / Rocket 5AC) Mounting Pole mount • all brackets & hardware included Wind Survivability 200 km/h Compliance NDAA compliant Downloads & Resources Ubiquiti Downloads & Datasheets Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $240.35 $229.90

• 

  Ubiquiti Ubiquiti airMAX AC Sector Antenna 5 GHz 21 dBi 60° (AM-5AC21-60)

   

  UISP — NDAA Compliant Ubiquiti airMAX AC Sector Antenna 5 GHz 21 dBi 60° (AM-5AC21-60) The Ubiquiti airMAX® AC Sector AM-5AC21-60 is a 2x2 MIMO 5 GHz sector antenna engineered to pair with the Rocket™5ac radio for high-capacity, multipoint base stations. Its 21 dBi gain and 60° beamwidth, combined with an innovative deflector design that reduces sidelobes and backlobes, deliver strong noise isolation in co-location deployments and a better signal-to-noise ratio for higher-order modulation. It is also compatible with RocketM5 radios. All mounting accessories and brackets are included. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. 21 dBi Sector Gain High 21 dBi gain across a focused 60° sector for reliable long-range, high-capacity multipoint coverage. 2x2 MIMO airMAX AC Built for the Rocket5ac radio (also compatible with RocketM5) to deliver superior beam performance on busy networks. Superior Noise Isolation The deflector design with reduced sidelobes and backlobes rejects interference from co-located transmitters — even on the same tower. Mounting Hardware Included Ships with all mounting accessories and brackets for fast pole/tower installation out of the box. Technical Specifications Model AM-5AC21-60 Type airMAX® AC 2x2 MIMO Sector Antenna Frequency Band 5 GHz Gain 21 dBi Beamwidth (Sector) 60° Compatible Radios Rocket™5ac (recommended) • RocketM5 Polarity Dual-polarity (2x2 MIMO) Mounting Pole / tower mount — all brackets & hardware included Compliance NDAA compliant Downloads & Resources Ubiquiti Downloads & Documentation Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $379.99

• Save -$5.98

  Ubiquiti Ubiquiti Fiber PoE G2 — Gigabit Outdoor Fiber-to-PoE Adapter (F-POE-G2)

   

  Ubiquiti Fiber PoE G2 — NDAA Compliant Ubiquiti Fiber PoE G2 — Gigabit Outdoor Fiber-to-PoE Adapter (F-POE-G2) The Ubiquiti Fiber PoE G2 (F-POE-G2) lets you power and connect a remote outdoor PoE device using fibre for data and a separate DC cable for power — ideal for long runs, lightning-prone sites, and locations where copper Ethernet would be impractical or vulnerable to surge. By keeping the data path on non-conductive fibre, the Fiber PoE G2 helps isolate sensitive networking gear from electrical surges while still delivering Gigabit throughput. Genuine Ubiquiti stock with fast Australia-wide shipping and expert Australian support. Gigabit Fibre Data Path Carries data over fibre for full Gigabit performance across distances far beyond copper Ethernet limits. Outdoor-Rated Housing Built for outdoor deployment so it can sit at the remote end of a link in tough Australian conditions. Surge Isolation by Design A non-conductive fibre data path helps isolate your switch and core gear from lightning-induced surges. NDAA Compliant Ubiquiti is a US-based manufacturer — suitable for government and security-sensitive installations. Technical Specifications Model F-POE-G2 Type Fiber-to-PoE adapter (data over fibre, power over DC) Data Rate Gigabit Deployment Outdoor Function Connects remote PoE devices, providing data via fibre and power via DC cabling Brand Ubiquiti Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $64.98 $59.00

• Save -$23.10

  Ubiquiti Ubiquiti UFiber Single-Mode BiDi SFP Module 1G 3km 20-Pack (UACC-OM-SM-1G-S-20)

   

  UniFi UFiber SFP — NDAA Compliant Ubiquiti UFiber Single-Mode BiDi SFP Module — 1G, 3 km, 20-Pack (UACC-OM-SM-1G-S-20) The Ubiquiti UFiber UACC-OM-SM-1G-S-20 is a 20-pack of single-mode bidirectional (BiDi) SFP transceivers that deliver 1 Gbps fibre links up to 3 km over a single strand of single-mode fibre using an LC connector. Designed for UniFi and UISP switches and gateways with SFP ports, these BiDi modules are sold in matched Blue (1310 nm TX) and Yellow (1550 nm TX) pairs to run send and receive on one fibre, simplifying long cable runs across buildings and campuses. Genuine Ubiquiti stock with fast shipping right across Australia. Single-Fibre BiDi Design Bidirectional transmission sends and receives over a single single-mode strand, halving the fibre needed for each link. 1 Gbps over 3 km Reliable 1.25 Gbps data rate across distances up to 3 km, ideal for inter-building and campus backbones. 20-Pack Value Ten matched Blue/Yellow pairs in one box — cost-effective for multi-link deployments and spares. UniFi & UISP Ready Plug-and-play with Ubiquiti SFP ports on UniFi and UISP switches and gateways. NDAA Section 889 compliant. Technical Specifications Model UACC-OM-SM-1G-S-20 (20-Pack) Form Factor SFP Supported Media Single-Mode Fibre Connector Type 1× LC Mode Bidirectional (BiDi) — single fibre Data Rate 1.25 Gbps (1G) TX Wavelength 1310 nm (Blue) / 1550 nm (Yellow) RX Wavelength 1550 nm (Blue) / 1310 nm (Yellow) Cable Distance Up to 3 km Pack Quantity 20 modules (10 matched Blue/Yellow pairs) Compliance NDAA Section 889 compliant Downloads & Resources UniFi SFP & Fiber Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $404.80 $381.70

• 

  Ubiquiti Ubiquiti airMAX AM-5G17-90 5GHz 17dBi 2x2 MIMO Sector Antenna with Rocket Kit

   

  airMAX Sector Antenna — NDAA Compliant Ubiquiti airMAX AM-5G17-90 — 5 GHz 17 dBi 2x2 MIMO Sector Antenna (with Rocket Kit) The Ubiquiti AM-5G17-90 is a carrier-class 5 GHz 2x2 dual-polarity MIMO BaseStation sector antenna built to integrate seamlessly with a Ubiquiti Rocket radio (sold separately) for high-capacity point-to-multipoint links. Operating across 4.90–5.85 GHz with 17 dBi of gain, it pairs robust outdoor construction with a built-in RocketM mount for fast, tool-light installation. Genuine Ubiquiti stock with fast Australia-wide shipping — ready for ISP, wireless backhaul, and PtMP deployments across Australia. 5 GHz 2x2 MIMO Performance Dual-linear polarisation and 17 dBi gain across the wide 4.90–5.85 GHz range deliver carrier-class throughput and range for multipoint networks. Plug-and-Play Rocket Integration A built-in RocketM mount lets a Ubiquiti Rocket radio snap securely into place — no special tools required (Rocket sold separately). Built for the Outdoors Rugged mechanical design rated to 200 km/h wind survivability keeps links stable through tough Australian conditions. Complete Mounting Kit Included Ships with a universal pole mount, RocketM bracket, and weatherproof RF jumpers — everything needed to deploy with a Rocket radio. Technical Specifications Model AM-5G17-90 Type 2x2 MIMO BaseStation Sector Antenna Frequency Range 4.90 – 5.85 GHz Gain 16.1 – 17.1 dBi HPOL Beamwidth 72° (6 dB) VPOL Beamwidth 93° (6 dB) Electrical Beamwidth 8° Electrical Downtilt 4° Max. VSWR 1.5:1 Polarization Dual-Linear Cross-pol Isolation 22 dB Min. Wind Survivability 200 km/h (125 mph) Wind Loading 41.7 N @ 200 km/h ETSI Specification EN 302 326 DN2 Dimensions 367 × 63 × 41 mm (excl. pole mount & Rocket) Weight 1.1 kg (excl. pole mount & Rocket) Mounting Universal pole mount, RocketM bracket & weatherproof RF jumpers included Compliance NDAA compliant Downloads & Resources airMAX Sector Antenna Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $149.99

• 

  Ubiquiti Ubiquiti UniFi Protect Smart Floodlight (UP-FloodLight) — 550 Lumen PoE Motion LED

   

  UniFi Protect — NDAA Compliant Ubiquiti UniFi Protect Smart Floodlight (UP-FloodLight) — 550 Lumen PoE Motion LED The UniFi Protect Smart Floodlight (UP-FloodLight) is a motion-activated, PoE-powered LED floodlight built for the UniFi Protect ecosystem. It pairs bright security lighting with a built-in motion sensor and full UniFi Protect integration, so a single Ethernet cable handles both power and control — no separate wiring or electrician required. Ideal for entries, driveways, car parks, and commercial frontages anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Bright Motion-Triggered Light A bright LED array with R/B/W indicators delivers strong security lighting, triggered automatically on motion or controlled manually from UniFi Protect. Single-Cable PoE One Ethernet cable carries both power and data via 48V DC PoE (12.95 W max) — pair it with any UniFi PoE switch for clean, simple installation. IPX5 Weatherproof An IPX5-rated polycarbonate and aluminium-alloy housing stands up to rain and the elements for reliable year-round outdoor use. UniFi Protect Integration Managed through the UniFi Protect web and mobile apps with Bluetooth 4.0 setup — link lighting to camera events with no monthly fees. Technical Specifications Model UP-FloodLight Networking Interface 10/100 MbE RJ45 port Power Method PoE, 48V DC, 0.27 A max Max. Power Consumption 12.95 W Weatherproofing IPX5 LEDs R / B / W Radio Bluetooth 4.0 ESD / EMP Protection Air: ±8 kV • Contact: ±8 kV Enclosure Material Polycarbonate, aluminium alloy Dimensions 135 × 65 × 50 mm (5.3 × 2.6 × 2″) Weight 216 g (without mount) • 236 g flat wall mount • 273 g angle mount Operating Temperature −10°C to 45°C, 20–80% non-condensing Software UniFi Protect (web, iOS, Android) Certifications FCC, IC, CE, Anatel Compliance NDAA compliant Downloads & Resources UP-FloodLight Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $209.99

• Save -$17.60

  Ubiquiti Ubiquiti UVC-G3-F-C-3 — G3 FLEX Camera Ceiling Mount (3-Pack)

   

  Genuine Ubiquiti · Ceiling Mount · 3-PackUbiquiti UVC-G3-F-C-3A Three-Pack of Ceiling Mounts for Your UniFi G3 FLEX Cameras The Ubiquiti UVC-G3-F-C-3 is a convenient three-pack of ceiling mount accessories for the UniFi Video Camera G3 FLEX. It's ideal for multi-camera installs where you want a consistent, professional overhead finish. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Three-pack value — includes three ceiling mounts, ideal for multi-camera deployments. Purpose-built fit — designed specifically for the UniFi G3 FLEX camera. Ceiling mounting — positions each camera neatly overhead for ideal coverage. Genuine Ubiquiti accessory — authentic parts for a precise, reliable mount. Specifications Model UVC-G3-F-C-3 Category Ceiling Mount Type Camera ceiling mount accessory Pack Size 3 Compatibility UniFi Video Camera G3 FLEX Warranty 3 Years (AU) Frequently Asked Questions How many mounts are included?This is a three-pack of ceiling mount accessories. Which camera are these for?They are designed specifically for the UniFi Video Camera G3 FLEX. What type of mount is it?Each is a ceiling mount accessory for overhead camera placement. Are these genuine Ubiquiti parts?Yes. They are authentic Ubiquiti accessories designed for a precise fit.

  Read more less

   

  $101.20 $83.60

• 

  Ubiquiti Ubiquiti UFiber 1:32 Passive Optical Splitter (UF-SPLITTER-32)

   

  UFiber GPON — NDAA Compliant Ubiquiti UFiber 1:32 Passive Optical Splitter (UF-SPLITTER-32) The Ubiquiti UF-SPLITTER-32 is a passive optical network (PON) splitter that fans a single fibre feed out to 32 subscriber connections in a UFiber GPON deployment. Designed to work with UFiber OLT solutions, it distributes the optical signal entirely passively — no power, no electronics, and no active cooling required — making it a reliable, maintenance-free building block for fibre-to-the-home and fibre-to-the-premises rollouts. Genuine Ubiquiti stock with fast Australia-wide shipping. 1:32 Split Ratio Distributes one PON port to up to 32 ONU/subscriber drops, maximising the reach of each UFiber OLT port. Fully Passive No power and no active components — the splitter operates silently and reliably with nothing to fail or maintain. UFiber OLT Ready Purpose-built for Ubiquiti UFiber GPON networks and designed to pair with UFiber OLT solutions. Model UF-SPLITTER-32 Type Passive Optical Network (PON) splitter Split Ratio 1:32 Network GPON Compatibility For use with UFiber OLT solutions Power Passive — no power required Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $83.00

• 

  Ubiquiti Ubiquiti PrismAP-5-30 airMAX ac 5GHz Isolation Antenna Horn - 30 Degree, 19 dBi

   

  airMAX ac — NDAA Compliant Ubiquiti PrismAP-5-30 — airMAX ac 5GHz Isolation Antenna Horn (30°, 19 dBi) The Ubiquiti PrismAP-5-30 is an airMAX® ac beamwidth isolation antenna horn designed for use with the PrismStation 5AC and IsoStation 5AC radios. Its symmetrical 30° horn delivers 19 dBi gain with excellent co-location performance and dual-linear polarisation — ideal for high-density PtMP sector deployments. Built to survive 200 km/h winds, it’s a proven choice for WISPs and point-to-multipoint networks across Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. 19 dBi Symmetrical Horn A precise 30° symmetrical beam delivers strong gain with breakthrough scalability for high-density sector clusters. Enhanced Co-Location Newly designed horn shaping improves beam isolation, allowing more sectors per site without sacrificing performance. Interchangeable & Modular Single-button release for fast antenna swaps. Works with PS-5AC, IS-5AC, and IS-M5 radios. Built for the Elements Rated to 200 km/h wind survivability with dual-linear polarisation — reliable for tough Australian outdoor sites. Technical Specifications Model PrismAP-5-30 Type airMAX ac beamwidth isolation antenna horn Supported Frequency Range 5.15 – 5.85 GHz Gain 19 dBi HPOL / VPOL Beamwidth 30° / 30° Elevation Beamwidth 30° Maximum VSWR 1.7:1 Polarization Dual-Linear Cross-Pol Isolation 17 dB Wind Survivability 200 km/h (125 mph) Wind Loading 56 N @ 200 km/h Compatible Radios PS-5AC, IS-5AC, IS-M5 Dimensions ⌀ 221.4 × 184.2 mm Weight 1.1 kg Compliance NDAA compliant Downloads & Resources PrismAP Datasheet (PDF) Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

  Read more less

   

  $154.00

Back to top