UniFi Access · Single-door video intercom · Six-component retailer bundleSee your visitors. Answer indoors. Control your entrance.
Build a connected entrance with the UniFi G3 Video Intercom Kit with Indoor Monitor, PoE Switch & CloudKey+. This CCTV Guru bundle brings together the outdoor G3 Intercom, a dedicated indoor screen, door controller, power injector, network switch and UniFi console.
Designed for a home entrance, reception or small office, it gives you the hardware for visitor video calls and configured door access. Professional installation and commissioning are recommended; a suitable electric lock and cabling are selected separately.
Outdoor visitor station
The UA-G3-Intercom combines a 7-inch touchscreen, camera, microphone and speaker in an IP65-rated entrance terminal.
Dedicated indoor answering
The 5-inch portrait Intercom Viewer provides a fixed indoor point for visitor screening and two-way conversation after pairing in UniFi Access.
Controller included
CloudKey+ hosts UniFi Access and UniFi Network, so this package includes a local management console as well as the intercom hardware.
Power planned for the hub
A dedicated 60W PoE++ injector powers the Door Hub. The Lite 8 PoE switch connects the system and powers the indoor viewer and CloudKey+.
What’s included
One of each exact model below. The Intercom Viewer is a single unit.
How the system connects
Existing router → Lite 8 PoE switch → CloudKey+ and indoor viewer
Switch data port → U-PoE++ injector → Door Hub → G3 Intercom
Door Hub → suitable electric lock and exit devices, selected separately
The switch and injector each require mains power. Connect a new G3 Intercom directly to a Door Hub PoE port for initial adoption and firmware updating. Keep the intercom connected to the hub for this door-control installation.
Setup and compatibility
- Connect to an existing router and suitable wired network; CloudKey+ is a management console, not a router.
- Install and update UniFi Access and UniFi Network on the CloudKey+, then adopt the hub, intercom, viewer and switch.
- Adopt the viewer and intercom on the same console and assign the viewer as a doorbell call receiver.
- Select lock wiring, exit devices, permissions and safe exit arrangements for the specific door. Door Hub supports one door; its powered lock output is 12V DC, up to 1A.
- Use Cat 5e or better network cabling. The indoor viewer, Door Hub and CloudKey+ require suitable indoor locations.
- Configure and test calls and unlocking after installation. Wallet credentials and other access methods require supported credentials, software and configuration.
Technical specifications
| Bundle SKU |
CG-UNIFI-G3-INTERCOM-KIT |
| Application |
UniFi Access for entry management; UniFi Network for switch management |
| Outdoor station |
UA-G3-Intercom: 7-inch touchscreen; IP65; Ethernet / PoE; maximum 13W |
| Indoor monitor |
UA-Intercom-Viewer: 5-inch, 1280 × 720 portrait display; indoor only; Ethernet / PoE; maximum 5W |
| Door controller |
UA-Hub-Door: one door; PoE++ input; four PoE+ output ports, up to 45W aggregate |
| Door lock interface |
Powered lock output: 12V DC, up to 1A; dry lock relay: rated 30V DC, 1A |
| Hub power |
U-PoE++: 60W, 48V DC / 1.25A, Gigabit LAN; AC cable included |
| Network switch |
USW-Lite-8-PoE: eight Gigabit ports; four PoE+ outputs; 52W total PoE budget; external AC/DC power supply included |
| Management console |
UCK-G2-SSD: CloudKey+ with 1TB SATA SSD; PoE powered; supports UniFi Access and Network; maximum 9.6W |
| Switch power allocation |
Viewer and CloudKey+: 14.6W combined device maximum, before cable losses. The Door Hub has its own injector. |
| Excluded |
Electric lock / strike, exit devices, site cabling, router, UPS, installation and configuration services |
Choose the right package for your entrance
This is the single-door version, with a Door Hub and indoor monitor. It is not the UA-G3-SK-Pro reader starter kit and does not include a Gate Hub. For a motorised gate installation, ask for a gate-specific package based on UA-G3-SK-Gate.
Optional accessories and services
- Suitable electric strike or lock, exit button and door contact: select after checking the door, lock voltage/current and safe exit requirements.
- Additional Intercom Viewer: add another indoor answering point, subject to confirmed stock and network capacity.
- Compatible Ethernet and lock cabling, site installation and commissioning: quote separately.
-
PowerShield Defender PSD650 UPS: optional backup power; runtime depends on the complete connected load.
Frequently asked questions
What is included in this UniFi G3 intercom kit?
One UA-G3-Intercom, one single-unit UA-Intercom-Viewer, one UA-Hub-Door, one U-PoE++ 60W injector, one USW-Lite-8-PoE switch and one UCK-G2-SSD CloudKey+. This is a CCTV Guru retailer bundle, not a separate Ubiquiti factory kit.
Do I need to buy another UniFi console?
The included CloudKey+ runs UniFi Access and UniFi Network. Connect it to your existing router and configure the applications; it does not replace your router or internet service.
Why are both a switch and PoE++ injector included?
The Lite 8 PoE switch supplies PoE+ and powers the indoor viewer and CloudKey+. The Door Hub requires PoE++, supplied by the separate 60W injector. Connect the G3 Intercom to a Door Hub PoE output.
Can the G3 Intercom plug straight into the switch?
Ubiquiti requires new G3 Intercom units to connect directly to an Access Control Hub PoE port for initial adoption and the latest firmware update. This bundle includes the Door Hub for that setup and door-lock control.
Can I see and talk to visitors from the indoor monitor?
Yes. Adopt the G3 Intercom and Intercom Viewer on the same UniFi console and configure the viewer as a call receiver. Live video, two-way communication and remote unlocking require correct network and Access configuration; unlocking also requires a suitable wired lock.
Is this a wireless intercom kit?
No. These components use wired Ethernet connections. Plan suitable Cat 5e or better cabling and mains outlets for the switch power supply and PoE++ injector.
Does the kit include an electric lock or installation?
No. Door locks or strikes, exit buttons, door contacts, Ethernet and lock cabling, installation, commissioning and backup power are separate. Choose the locking hardware and safe exit arrangement for the specific door.
Is the indoor screen suitable for outdoor use?
No. The Intercom Viewer is indoor only and uses portrait mounting. The G3 Intercom outdoor station is IP65 rated. Keep the Door Hub and CloudKey+ in a suitable indoor location.
Is this the G3 Gate Starter Kit?
No. This bundle uses UA-Hub-Door for a single-door installation. For a motorised gate project, ask for a gate-specific bundle based on UA-G3-SK-Gate and have the gate operator interface checked.
Can I add another indoor monitor?
Additional compatible Intercom Viewers can be configured on the same console. They are sold separately and need suitable PoE ports, network configuration and confirmed availability.
Official product resources
