Hikvision Pro Series · EM + Mifare + QR Scanner · Keypad · OSDP · IP65
Hikvision Pro QR + Dual-Freq Reader
Pre-order — Australian stock arriving soon. Secure your unit at the current pre-order price and we'll ship the moment stock lands. Delivery ETA will be confirmed by email after order placement. For the non-QR sibling that's in stock now, see the
DS-K1105EDKB (no QR) .
Triple-Credential Entry — Card, PIN & QR Code — for Hikvision Access Control
The Hikvision DS-K1105EDKB-QR is the QR-enabled variant of Hikvision's Pro Series dual-frequency card reader with keypad. Alongside legacy EM 125 kHz cards, modern Mifare 13.56 MHz smart-cards/fobs and 4-6-digit PIN entry, it adds an integrated QR code scanner — unlocking doors from dynamic QR codes delivered to visitors' phones via Hik-Connect, HikCentral or a 3rd-party visitor-management system. Same slim IP65 black housing, same OSDP v2 / Wiegand / RS-485 connectivity as the standard DS-K1105EDKB — just with mobile-credential support added.
Mobile Credentials
QR Code Scanner Built-in
Card Technology
EM 125 kHz + Mifare 13.56 MHz
Keypad
Backlit 4×3 · PIN Entry
Protocols
Wiegand 26/34 · RS-485 · OSDP v2
Protection
IP65 · Anti-Tamper · Metal Body
Power
12 VDC · PoE on controller
QR codes — the credential your visitors already have
The QR scanner is what separates this variant from the standard DS-K1105EDKB. Instead of issuing a physical card to every visitor, contractor or delivery driver, you send them a dynamic QR code via SMS, email or an app — valid only for a specific time window and door. They hold their phone screen up to the reader, it scans, and the controller grants access (or doesn't) based on the credential. No physical card to lose, no key to collect, and the credential expires on its own.
Dynamic QR Credentials
Generated on the controller or via Hik-Connect / HikCentral. Each QR is time-limited, door-limited and logged on use — far more auditable than a shared PIN.
Visitor Management Without Cards
Issue a one-time QR to a courier or contractor via SMS. No lost-card follow-ups, no key-pickup appointments, no PIN sharing. QR expires automatically.
Backup to Card + PIN
QR works alongside — not instead of — the existing dual-frequency card and PIN modes. Regular staff keep their Mifare fobs; visitors get QR codes.
BYOD Mobile Access
No app install required for visitors — the QR can be delivered as a plain image in SMS/email. Only the admin needs an app to generate codes.
Everything Else — Same as Standard Model
Same 1/2" scan window, same slim housing, same backlit keypad, same OSDP/Wiegand outputs, same IP65 rating, same 12 VDC power. Drop-in replacement for the standard DS-K1105EDKB.
Pairs With Hikvision Pro Controllers
Same K2601 / K2602 / K2604 controller compatibility. The QR-code validation runs on the controller side, so no firmware update needed on existing Hikvision access deployments to support QR credentials.
Where QR access actually belongs — AU use cases
Short-Term Rental / Holiday Lets
Guests get a QR via booking confirmation email, valid for their stay only. No key handover, no lockbox code sharing. Expires after checkout.
Co-Working Spaces & Serviced Offices
Day-pass members and visitors get a QR for the session; regular members keep their Mifare fob. One reader handles both credential classes.
Trade Contractor / Delivery Access
Issue a 2-hour QR for the courier window. No keys cut, no PIN rotation after jobs. Access log is auto-timestamped.
Event Venues & Meeting Rooms
Conference attendees scan the QR on their badge to enter session rooms. Entries are logged for safety / capacity reporting.
Gym / Studio Trial Members
Trial-membership QR codes valid 7-14 days. Converts automatically to card/fob once membership is confirmed.
Body Corp Visitor Parking / Gates
Residents generate a QR for their visitor via the body-corp app. QR scanned at the gate opens the barrier — no residents need to buzz visitors in.
Technical Specifications
DS-K1105EDKB-QR · Full Specifications
SKU
DS-K1105EDKB-QR
Type
Hikvision Pro Series Dual-Frequency Card Reader with Keypad + QR Scanner
Credential Technologies
EM 125 kHz · Mifare 13.56 MHz (ISO 14443 Type A · Classic / Plus / DESFire) · QR Code (scanned) · PIN
Card Reading Distance
Up to 5 cm typical (depends on card type / shielding)
QR Scanner Window
Integrated front-face scanner · reads static or dynamic QR codes from phone screen or printed sheet
Keypad
4×3 backlit · 0-9 + # + * keys · PIN 4-6 digits
Output Protocols
Wiegand 26/34 (configurable) · RS-485 · OSDP v2 with secure channel
Status Indicators
Bi-colour LED (red / green) · buzzer
Tamper Protection
Built-in tamper switch reports to controller on removal
Power Supply
12 VDC ±15 % · typical draw slightly higher than standard DS-K1105EDKB due to QR scanner module
Wiring
Multi-conductor cable · Cat5e/Cat6 recommended for OSDP runs up to 1200 m
Weatherproof
IP65 — dust-tight + water-jet protected
Operating Temperature
−30 °C to +60 °C · humidity ≤ 95 % non-condensing
Housing
Metal / zinc alloy · scratch-resistant black finish
Dimensions
Same slim flush-mount profile as DS-K1105EDKB (confirm via datasheet for QR-scanner window placement)
Mounting
Single-gang back box OR direct wall mount with supplied screws
Compatibility
Hikvision Pro Access controllers (K2601 / K2602 / K2604) for QR credential generation · any 3rd-party Wiegand 26/34 or OSDP v2 controller for card/PIN credentials
Warranty
3-Year Australian Warranty (back-to-base)
Standard vs QR — pick the right model
Feature
DS-K1105EDKB (standard)
DS-K1105EDKB-QR (this listing)
EM 125 kHz + Mifare 13.56 MHz cards
✓
✓
Backlit keypad + PIN
✓
✓
Wiegand 26/34 + RS-485 + OSDP v2
✓
✓
IP65 + anti-tamper + metal body
✓
✓
QR code scanner (mobile credentials) ✗
✓
AU price (inc GST)
$169
$219
AU stock
In stock
Pre-order
Best for
Staff card/PIN entry
Staff + visitor / contractor / short-term credentials
Rule of thumb: if every entry at your site is by permanent staff with cards, the standard model is cheaper and does everything you need. If you regularly issue short-term access to visitors, contractors, holiday-let guests or trial members, the QR scanner pays for itself in avoided card issuance and lost-card follow-ups.
What you need to complete the system
Same system components as the standard DS-K1105EDKB:
1. Access Controller
Hikvision Pro K2-series (K2601 single-door, K2602 two-door, K2604 four-door) — required for QR code generation and validation. 3rd-party controllers can use card/PIN but may not support QR validation.
2. Electric Strike or Maglock
LOX ES20 electric strike for timber/aluminium doors; maglocks for glass doors and high-security applications.
3. Exit Button
SECOR WEL1911 push-to-exit button on the egress side — required by fire code for free egress on most AU installs.
4. Cards & Fobs (optional)
If you're issuing physical cards to regular staff alongside QR to visitors — EM 125 kHz or Mifare 13.56 MHz.
5. 12 V DC Power Supply
Access control-grade PSU with battery backup. Rate for reader + strike + controller combined + 30 % headroom.
6. Cat6 Wiring
Cat5e/Cat6 run from reader back to controller. OSDP supports up to 1200 m; Wiegand is limited to ~150 m.
Frequently Asked Questions
When will stock arrive? Stock arrival is confirmed by email after you place a pre-order. If timing is critical, contact our team before ordering and we'll give you the current ETA from our Hikvision Australia distributor.
How do I generate the QR codes? QR credentials are generated on the access controller (Hikvision Pro K2-series) or in Hik-Central visitor-management workflows. Admins issue a time-limited QR to a visitor via SMS/email; the visitor scans it at the reader.
Can I use QR with a 3rd-party access controller? Card and PIN modes work with any Wiegand 26/34 or OSDP v2 controller. QR credential validation specifically requires Hikvision Pro controller firmware — confirm with us if you're using a non-Hikvision ACS.
Does the visitor need an app installed? No. The QR can be delivered as a plain image in SMS/email/MMS. Only the admin generating codes needs the Hik-Connect or HikCentral app.
Does it work in direct sunlight? Yes — the QR scanner uses active illumination so sunlight glare on the phone screen doesn't block it. Angle the reader out of the brightest direct sun if possible for best read reliability.
What if the visitor's phone screen is cracked / dim? Dim screens read fine; heavily cracked screens may fail. Issue a backup PIN alongside the QR for critical cases.
Is this a standalone door controller? No — it's a reader only . It sends credentials (card ID, PIN, QR data) over Wiegand or OSDP to a separate access controller which makes the unlock decision.
What warranty? 3-Year Australian warranty , serviced back-to-base through Hikvision Australia by CCTV Guru.
Downloads & Resources
Official Hikvision documentation for the DS-K1105EDKB-QR, hosted on the CCTV Guru CDN for fast Australian access.
Hikvision shares one User Manual across the DS-K1105 series (standard + QR variant). QR-specific configuration is covered in the datasheet above.
Pre-order the DS-K1105EDKB-QR from CCTV Guru
CCTV Guru is an authorised Australian reseller of the Hikvision Pro Series access control range. Lock in the current pre-order price now — we'll email you an ETA and ship the moment our Hikvision Australia stock lands. Request a free quote or contact our Australian team for ETA before ordering.
