CCTV Brackets & Mounts

• 

  Hikvision Hikvision DS-1280ZJ-SD11 Junction Box for 4-inch PTZ Cameras

   

  Official Hikvision Accessory · 4-inch PTZ Junction Box Hikvision DS-1280ZJ-SD11 — Junction Box for Compatible 4-inch PTZ Cameras The DS-1280ZJ-SD11 is an official Hikvision aluminium-alloy junction box for compatible 4-inch PTZ cameras. It provides space to route and protect camera connections at the mounting point and gives the installation a cleaner, serviceable finish. This is a model-specific accessory—not a universal dome-camera bracket. Confirm your exact PTZ model in Hikvision’s accessory list before ordering. Key details Application: junction box for compatible 4-inch Hikvision PTZ cameras Material: aluminium alloy Finish: Hikvision white Dimensions: 185.2 × 157.7 × 39.7 mm Weight: approximately 400 g Why use it? Keeps cable joins and camera pigtails organised at the mounting point. Provides a purpose-designed interface for supported Hikvision 4-inch PTZ cameras. Allows easier future access to connections than placing joins loose behind the camera. Matches the standard Hikvision white camera finish. Important before you buy Check compatibility by exact camera model. Similar-looking 4-inch PTZ cameras can use different brackets. The official specification describes the material, dimensions, weight and application; it does not publish a standalone IP weatherproof rating for this junction box. Outdoor weather resistance depends on the complete installation, including cable glands, conduit entries, sealing and mounting surface. Use fixings appropriate for the wall or ceiling material and the total installed load. Frequently asked questions Is the DS-1280ZJ-SD11 for fixed dome cameras? No. Hikvision specifies it as a junction box for compatible 4-inch PTZ cameras. What are the dimensions? It measures 185.2 × 157.7 × 39.7 mm and weighs approximately 400 g. Is it waterproof by itself? Hikvision does not publish a standalone IP rating for this junction box. Any outdoor installation must be correctly sealed at cable and conduit entries. How do I confirm compatibility? Match the exact camera model against Hikvision’s accessory list or ask CCTV Guru before ordering. Official Hikvision reference View the official DS-1280ZJ-SD11 product specification

  Read more less

   

  $25.00

• 

  Wi-Tek Wi-Tek WI-BRKC135 — CPE Mounting Bracket (Pole & Wall)

   

  Genuine Wi-Tek · CPE Bracket · Steel · Pole & WallWi-Tek WI-BRKC135Aim Your CPE Exactly Where You Need It The Wi-Tek WI-BRKC135 is a heavy steel CPE mounting bracket for small-to-medium wireless CPEs. Its modular design supports round poles, square poles and wall mounting, while the wide tilt range lets you aim the link precisely. An anti-UV baked varnish finish keeps it corrosion-resistant in harsh outdoor conditions. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Pole or wall mounting — fits round poles up to 100mm, square poles up to 70mm, or straight to a wall. Wide tilt adjustment — 0 to +25° up and 0 to −45° down to aim the link precisely. Built for harsh outdoors — heavy steel with anti-UV baked varnish for corrosion resistance. Modular & flexible — φ35mm arm pole adapts to a wide range of small-to-medium CPEs. Specifications Model WI-BRKC135 Category CPE Mounting Bracket Material Steel Surface Treatment Baked Varnish (Anti-UV) Colour White Installation Round pole <100mm, Square pole <70mm, Wall mount Adjustable Angle 0 to +25° (up), 0 to −45° (down) Dimensions 265 × 170 × 6.7 mm @ 0° Arm Pole φ35 mm (for CPE installation) Weight 0.31 kg In the Box 1 × Bracket, 2 × 330mm metal cable ties Warranty 3 Years (AU) WI-BRKC135 Datasheet Frequently Asked Questions What size poles does it fit?Round poles up to 100mm and square poles up to 70mm using the two included 330mm metal cable ties. Optional 640mm ties (up to 200mm poles) and 960mm ties (up to 300mm poles) are available. How far does it tilt?It adjusts from 0 to +25° upward and 0 to −45° downward, so you can aim the CPE accurately. Can I wall mount it instead?Yes — remove the pole mounting assembly, fix the wall hanging assembly to the wall, then fit the CPE arm and set the angle. Is it suitable outdoors?Yes — heavy steel with an anti-UV baked varnish finish designed to resist corrosion in harsh environments.

  Read more less

   

  $39.00

• 

  AXIS AXIS TQ5001-E Wall and Pole Mount (02411-001)

   

  AXIS TQ5001-E · NDAA & TAA COMPLIANT Ruggedized Mounting Excellence for Enterprise Surveillance The AXIS TQ5001-E delivers an ultra-robust, commercial-grade mounting solution engineered specifically for high-performance AXIS PTZ and multi-sensor cameras. Built from impact-resistant, premium aluminum casing, this versatile mount simplifies high-density outdoor deployments. By integrating a reversible mounting bracket, field technicians can easily transition between wall-mounted facades and freestanding pole structures without purchasing separate brackets. It is the ultimate accessory for high-security environments, critical infrastructure, transport hubs, and public surveillance projects where structural integrity is non-negotiable. System Integration PTZ & Multi-Sensor Optics Bracket Reversible Wall/Pole Weatherproofing IP66 RJ45 Cable Vandal Protection IK10 Impact Rating Advanced In-Field Termination & Seamless Installation Engineered to mitigate common installation points of failure, the AXIS TQ5001-E Wall and Pole Mount features a dual-connection path using either an RJ45 connector or an insulation-displacement contact (IDC) terminal block. A pre-installed internal cable with an IP66-rated Ethernet coupler ensures a hermetic, moisture-free seal inside the camera assembly, preventing environmental decay and long-term signal loss. From sub-zero industrial environments to scorching coastal perimeters, this mounting system maintains structural load support up to 40 kg, preserving the stability required for advanced PTZ tracking and analytics. Dual-Purpose Reversible Chassis Eliminate project planning complexity and reduce warehouse SKU overhead. A simple inversion of the primary bracket lets installers pivot from architectural flat-wall mounting to round-pole installation with marine-grade steel straps. Military-Grade Environmental Protection Boasting IK10 mechanical impact resistance, IP66 ingress sealing, and MIL-STD-810G salt spray compliance, the marine-ready powder-coated aluminum casing is built to withstand direct impacts and extreme corrosion forces. Technical Specification Matrix Camera Mount Model AXIS TQ5001-E Casing Material IP66-, NEMA 4X- and IK10-rated white powder-coated aluminum (NCS S 1002-B) Compatible Series AXIS M5000, M55, P56, Q37, Q60, Q61, and Q63 Series PTZ & Multi-sensor cameras Connectivity Options Output: IP66 RJ45 Ethernet (male) | Input: RJ45 Ethernet (female) & IDC (insulation-displacement contact) Maximum Load Capacity 40 kg (88.2 lb) Operating Temperature -50 °C to 65 °C (-58 °F to 149 °F) | Humidity: 10–100% RH (non-condensing) Weight & Dimensions 1960 g (4.3 lb) | Profile: 291.8 mm x 175.4 mm (11.49" x 6.90") Sourcing Compliance NDAA Compliant & TAA Compliant (GSA Approved) Warranty AXIS 5-Year Comprehensive Warranty Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS TQ5001-E suitable for pole installation out of the box? Yes, the bracket itself is reversible to accommodate poles. However, please note that you will need separate stainless steel pole straps (such as AXIS Steel Straps TX30) to firmly lash the assembly to structural columns. What is the purpose of the IDC connection option? The IDC (insulation-displacement contact) connector offers versatile wiring flexibility. Installers can easily punch down raw field Ethernet cables directly inside the bracket without having to crimp an RJ45 jack in restricted overhead environments. Does this mount include environmental protection against rain and storms? Absolutely. It features a built-in cable with an IP66-rated Ethernet connection collar. This forms an airtight and watertight seal when connected to compatible Axis network PTZ dome cameras. Is this mount GSA schedule eligible and compliant with federal procurement? Yes. The AXIS TQ5001-E is fully TAA and NDAA compliant, making it eligible for integration into US government buildings, military installations, and critical municipal network architectures. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $299.00

• 

  AXIS AXIS TP3101 Pendant Wall Mount (01783-001)

   

  AXIS TP SERIES · NDAA & TAA COMPLIANT Seamless Aesthetic Integration for Premium Fixed Dome Security The AXIS TP3101 Pendant Wall Mount revolutionizes interior surveillance installations by delivering a clean, pendant-style configuration for premium indoor mini domes without requiring cumbersome, multi-piece pendant kits. Architecturally optimized for commercial high-density environments, retail storefronts, corporate receptions, and healthcare institutions, this mount features a professional contemporary design that effortlessly transforms security infrastructure into a cohesive element of your interior architecture. By enabling precise positioning, the mount maximizes the efficacy of advanced edge-based retail analytics like high-accuracy people counting and automated face recognition at critical access points. Mounting Style Pendant Wall/Ceiling Optics Alignment Multi-Directional Target Placement Retail & Entrances Protection Rating Concealed Anti-Tamper Advanced Hardware Concealment & Integrated Connectivity Engineered for high-security environments where visual presentation is paramount, the AXIS TP3101 Pendant Wall Mount eliminates unsightly external wiring infrastructure. The impact-resistant casing is completely paintable to seamlessly match proprietary interior design themes or corporate color schemes. Beyond its sleek aesthetics, the mount contains a spacious internal, ingress-protected accessory compartment designed to safeguard secondary connectivity hardware. System integrators can deploy auxiliary modules directly at the device endpoint—including audio interfaces, standalone microphones, deterrent LEDs, or PoE-over-Coax compact extenders—keeping the hardware secure, unified, and protected from physical tampering. Concealed Cabling & Anti-Tamper Hardware Features an innovative architecture that completely routes and hides cabling within the inner structure while fully masking mounting screws behind a snap-on cover. This minimizes physical vulnerabilities, limits tampering risks, and provides a polished, ultra-clean commercial aesthetic required for luxury retail, enterprise lobbies, and corporate offices. Smart Compartment for Edge Accessories The integrated internal service bay accommodates critical performance-expanding accessories directly at the camera node. Installers can seamlessly tuck away AXIS T61 Series audio/IO interfaces, high-fidelity microphones, AXIS deterrent LEDs, or coax migration modules without adding cluttered external equipment enclosures. Technical Specification Matrix Camera Mount Model AXIS TP3101 Supported Products AXIS M32 Series, AXIS P32 Series, AXIS M4308-PLE, M4317/M4318 Panoramic Series Casing Material PC-ABS Blend Cover; Glass-Fibre Reinforced Polyamide Bottom Bracket Color & Finish White NCS S 1002-B (Repaintable in any color) Dimensions 204 mm x 148 mm x 42 mm (8.0" x 5.8" x 1.7") Weight 228 g (0.50 lb) Maximum Load Capacity 3 kg (6.6 lbs) Operating Environment Indoor Operational Range: -10 °C to 50 °C (14 °F to 122 °F) Sustainability Compliance PVC-Free Construction, 22% Recycled Plastics Technical Datasheet Quick Start Guide Operation Manual Installation Manual Does the AXIS TP3101 require an additional pendant kit to mount dome cameras? No. The AXIS TP3101 is explicitly designed to enable complete, clean pendant-style mounting natively for compatible AXIS dome cameras. This eliminates the need to source or configure separate pendant adapters, reducing hardware costs and installation complexity. Can this mount be deployed on surfaces other than a standard vertical wall? Yes. Due to its flexible design, it can be mounted directly on vertical walls, hard ceilings, desktops, or checkout countertops. It is also fully compatible with junction boxes when paired with the optional AXIS TP3701 J-Box & Pole Adapter accessory. What accessories can safely fit inside the built-in storage compartment? The integrated internal, ingress-protected space is designed to hold the AXIS T6101 Audio and I/O Interface, AXIS Device Microphone A or B, the AXIS I/O Indication LED deterrent device, or the AXIS T8643 PoE+ over Coax Compact unit. Is the plastic casing safe to paint for custom commercial color matching? Yes. The exterior cover is crafted from a high-quality, eco-friendly PC-ABS blend that can easily be repainted in any color to allow the finished installation to blend seamlessly with surrounding architecture. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $109.00

• 

  AXIS AXIS T91B51 Ceiling Mount (5507-461)

   

  AXIS T91B51 · NDAA & TAA COMPLIANT Resilient Low-Ceiling Surveillance Infrastructure The AXIS T91B51 Ceiling Mount provides a high-density, ruggedized structural installation base optimized for low-clearance environments, commercial warehouses, loading docks, and roof overhangs. Designed to preserve hardware integrity, it effortlessly secures high-performance AXIS PTZ and fixed dome cameras close to the ceiling architecture to mitigate the risks of accidental physical contact in busy operational zones. Mount Interface 1.5" NPS Thread Swivel Action ±45° Pivot Angle Load Capacity 10 kg (22 lbs) Protection Rating IK10 & NEMA 4X Advanced Impact Mitigation & Sloped Ceiling Adaptability Engineered to absorb severe structural forces without structural failure, the AXIS T91B51 incorporates an integrated ball-joint mechanism that allows the mount to swing dynamically if accidentally struck by forklifts, tall vehicles, or industrial equipment. This unique feature protects both the internal camera electronics and the building ceiling structure from costly permanent damage. Furthermore, its physical design ensures the camera remains completely straight and perpendicular when installed on sloped ceilings or uneven roof overhangs, neutralizing complex architectural constraints. Safety Swivel Innovation Rather than providing a rigid point of failure, the internal ball joint enables a controlled ±45° pivot path. If impacted by moving facility machinery, it safely yields and swings, instantly preventing catastrophic shear strain on hardware and mounts. Extreme-Duty Corrosion Defense Constructed from marine-grade powder-coated aluminum, the unit achieves official NEMA 4X and IK10 ratings. It provides rugged defense against high-energy physical impacts, salt spray, moisture, and extreme environmental deterioration. Technical Specification Matrix Camera Model AXIS T91B51 Part Number 5507-461 Thread Interface 1.5" NPS thread standard Maximum Mechanical Load 10 kg (22 lbs) Pivot Angle Bounds ±45° dynamic deflection Casing Material Powder-coated aluminum alloy Impact Resistance IK10 Vandal-resistant certified Environmental Resistance NEMA 4X corrosion-resistant Dimensions & Weight Length: 104 mm (4 in) | Weight: 1.2 kg (2.6 lb) Technical Datasheet Quick Start Guide Operation Manual Installation Manual What exact cameras are natively supported by this mount? The AXIS T91B51 natively supports all Axis PTZ dome cameras and outdoor models of Axis fixed domes that use a standard 1.5” NPS thread interface. Certain configurations require model-specific pendant kits. Can the hanging length be extended for high-ceiling facilities? Yes. If a longer drop profile is required for your setup, the base unit is fully compatible with optional AXIS T91B52 extension pipes available in 30 cm (12 in) and 100 cm (39 in) variations. How does the swivel action mechanism prevent asset damage? Instead of acting as a rigid bracket that breaks or warps when hit, the internal ball joint yields up to ±45 degrees under mechanical force. This prevents structural damage to the ceiling surface and minimizes shock to the camera. Is this hardware rated for corrosive or maritime outdoor use? Absolutely. With its premium powder-coated aluminum construction and NEMA 4X classification, this mount is fully protected against corrosion, extreme moisture, and industrial salt spray. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $239.00

• 

  AXIS AXIS T94Q01F Ceiling and Column Mount (5507-591)

   

  AXIS T-SERIES · NDAA & TAA COMPLIANT Industrial-Grade Structural Integration for Fixed Camera Housings The AXIS T94Q01F Ceiling-and-Column Mount offers premier architectural flexibility for demanding commercial surveillance environments. Constructed from heavy-duty powder-coated aluminum, this mount supports critical infrastructure by adapting seamlessly to both ceiling/soffit overhead positions and column/parapet vertical terminations. Engineered to sustain stability across high-density logistics hubs, transit terminals, and exposed industrial facades, it provides a stable foundation that guarantees optimal camera positioning and clear video verification year after year. Resolution Fixed Housing Fit Optics Swivel & Tilt Arm Night Vision/PTZ 360° Manual Pan Protection IK10 & NEMA 4X Advanced Protection and Streamlined Vandal-Resistant Engineering Beyond its rugged physical presence, this system prioritizes internal security protocols through a completely enclosed cable management architecture. By routing data and power links directly through the internal aluminum pipe, critical connections are never exposed to severe weather elements or potential physical tampering. System operators can easily maintain alignment adjustments using the integrated flexible swivel arm mechanism. For high-tier enterprise compliance deployments requiring verifiable infrastructure, integrating the AXIS T94Q01F ensures full adherence to strict governmental facility regulations while ensuring compatibility across a vast range of AXIS outdoor-ready box camera series. Vandal-Proof Impact & Environmental Resilience Certified with strict IK10 impact and NEMA 4X environmental ratings, this mount provides structural security against deliberate physical strikes, windblown dust, high-pressure water jets, and corrosive salt air sprays, making it ideal for marine or heavy industrial sites. Omnidirectional Adjustment Flexibility The specialized mechanical arm design supports a comprehensive 360-degree rotation, +25 to -65 degree tilt ranges, and a wide mechanical pan configuration. This lets technicians fine-tune fields of view during complex, tight-angle perimeter installations. Technical Specification Matrix Camera Mount Model AXIS T94Q01F Material Construction Powder-coated aluminum casing (Color: White NCS S 1002-B) Maximum Load Capacity 5.0 kg (11.0 lbs) Mechanical Adjustments Arm: 360° | Tilt: +25° to -65° | Pan: ±100° Environmental Protection NEMA 4X-rated weatherproofing, IK10-rated impact resistance Cable Routing Design Internal pipe routing with back cable hole and M25 3/4" side conduit entries Supported Product Lines AXIS T92E/T93F Series, M11-E/P13-E/Q16-E/Q1775-E Network Cameras Compliance & Certifications NDAA Compliant, TAA Compliant, IEC/EN/UL 60950-1, CE, REACH Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS T94Q01F mount fully compliant with federal procurement standards? Yes. The AXIS T94Q01F is completely NDAA and TAA compliant, making it authorized for use in federal infrastructure, military installations, and highly secure commercial operational centers. What housing series are directly compatible with this ceiling/column setup? This mount is specifically engineered to hold standard fixed camera housings, including the AXIS T92E Series, AXIS T93F Series, and outdoor-ready box camera models like the M11-E, P13-E, Q16-E, and Q1775-E. Does this mount include built-in conduit adapters for side cable routing? The mount features integrated M25 3/4" side conduit entries. If side routing is required while maintaining full environmental seal integrity, standard AXIS ACI conduit adapters can be purchased separately. How does internal cable management protect against localized vandalism? Cables feed directly into the base mount and through the specialized internal structural cavity. This leaves no exposed external wiring that can be cut, pulled, or damaged by malicious actors. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $229.00

• 

  AXIS AXIS TM3201 Recessed Mount (01856-001)

   

  AXIS ACCESSORIES · NDAA & TAA COMPLIANT Discreet High-End Integration for Enterprise Environments The AXIS TM3201 Recessed Mount offers a premium, low-profile mounting alternative for indoor surveillance deployments. Specifically designed for high-density corporate environments, retail storefronts, and architectural projects where hardware visibility must be kept to a minimum, this mount allows compatible Axis dome cameras to be seamlessly embedded directly into drop ceilings or drywall panels. By shifting the form factor into a flush orientation, it helps maintain building aesthetics without compromising operational camera fields of view. Mount Type Recessed In-Ceiling Optics Match Axis Dome Series Profile Ultra Low-Profile Protection Indoor Secured Architectural Adaptability and Hardware Integrity Engineered to satisfy stringent interior design specifications, the AXIS TM3201 Recessed Mount simplifies physical cable management while maintaining stable sensor orientation. By reducing the physical footprint that extends past the ceiling plane, the kit effectively mitigates the risks of accidental physical impacts or line-of-sight tampering. It provides an ideal framework for multi-camera rollouts inside enterprise offices, banking lobbies, and high-end hospitality venues where standard surface mounts disrupt the ceiling flow. Flush Professional Finish Transforms standard protruding dome cameras into highly recessed, visually clean installations that align flawlessly with corporate design guidelines and modern ceiling layouts. Simplified Assembly Path Designed with modular installation components to accelerate multi-device site handovers, reducing labor overhead for large enterprise security deployments. Technical Specification Matrix Camera Model AXIS TM3201 Mounting Type Recessed In-Ceiling Kit Environment Indoor Use Only Color Option White / Paintable Blend Material Structure High-quality impact polymer / alloy components Compliance NDAA Compliant, TAA Compliant Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS TM3201 compatible with outdoor installations? No, the AXIS TM3201 is optimized and rated exclusively for indoor drop-ceiling or interior drywall mounting environments. Can the visible trim ring of the mount be custom painted? Yes, the structural trim components are designed so they can be carefully painted to match custom interior colors or specific architectural color schemes. Is this accessory completely NDAA and TAA compliant? Yes, like the majority of professional AXIS hardware lines, this product meets all federal criteria for NDAA and TAA supply chains. Does the mount include integrated cable management routes? Yes, the structural layout provides clean pathways to route and hide networking cables up into the ceiling plenum securely. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $99.00

• 

  AXIS AXIS T94K01D Pendant Kit (5505-081)

   

  AXIS T94 SERIES · NDAA & TAA COMPLIANT Professional Aesthetic Integration for Premium Axis Deployments The AXIS T94K01D is a high-grade indoor and outdoor pendant mount kit engineered to bridge your high-density surveillance setup with industry-standard mounting architecture. Designed to enable a clean, seamless visual transition from structural surfaces to the camera body, this kit is ideal for demanding commercial environments, architectural retail designs, and transport hubs. By facilitating clean cable management and robust structural coupling, it ensures enterprise-level reliability while preserving the sleek aesthetic profiles of your premium optical hardware. Thread Interface 1.5" NPS / NPT Optics Mounting Axis Dome & Panoramic Environment Rating Indoor & Outdoor Max Load Rating 10 kg / 22 lbs Advanced Structural Compatibility and Analytics Optimization Maximizing the field of view for high-performance visual analytics requires precision positioning. Utilizing the AXIS T94K01D Pendant Kit allows system integrators to drop cameras below structural obstructions, optimizing line-of-sight for deep learning algorithms and dewarping panoramic fields. The mounting kit is fully compatible with a massive array of Axis wall mounts, ceiling mount columns, pole adapters, and extension pipes, guaranteeing absolute adaptability for custom security architecture layouts. Heavy-Duty Architectural Integration Constructed with impact-resistant weatherproofing elements, the kit handles high-load capacities up to 22 lbs, making it perfectly suited for high-traffic environments, public transit infrastructure, and corporate entryways. Universal 1.5" Thread Standardization Features standard 1.5” NPS and NPT threading to ensure maximum configuration agility with both proprietary Axis brackets and pre-existing third-party mounting infrastructures for cost-effective retrofits. Technical Specification Matrix Camera Model AXIS T94K01D Product Type Pendant Mount Kit / Adapter Thread Interface 1.5" NPS Thread (Compatible with 1.5" NPT) Environment Application Indoor and Outdoor Use Maximum Load Capacity 10 kg (22.0 lbs) Color / Finish Axis White Supported Series Selected AXIS M32, P32, M30, M43, & Q35 Series Dome/Panoramic Cameras Warranty 3-Year Axis Limited Warranty Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS T94K01D Pendant Kit suitable for heavy outdoor exposure? Yes, the AXIS T94K01D is engineered and certified for both indoor and outdoor applications. When paired with an outdoor-rated Axis dome or panoramic camera, it maintains complete weather protection and architectural structural stability. What specific threading standard does this kit use? This pendant kit features a 1.5" NPS internal thread. It is mechanically fully compatible with standard Axis ceiling, wall, pole, and parapet mounting accessories utilizing 1.5" NPS or NPT threading profiles. Which camera lines are compatible with the AXIS T94K01D? It is designed explicitly for select Axis dome and panoramic camera lines, including popular variations within the AXIS P32, M32, M43, and legacy Q3505-V architectures. Always verify model mounting patterns against the master datasheet list. Is this hardware NDAA and TAA compliant? Absolutely. As an official Axis Communications accessory component, the AXIS T94K01D meets all federal guidelines for national security procurement, ensuring complete compliance with NDAA and TAA sourcing frameworks. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $99.00

• 

  AXIS AXIS T94A01D Pendant Kit (5502-431)

   

  AXIS ACCESSORIES · NDAA & TAA COMPLIANT Professional Dome Mounting with the AXIS T94A01D The AXIS T94A01D Pendant Kit is a rugged, commercial-grade mounting accessory engineered to facilitate seamless pendant installations for compatible AXIS fixed dome network cameras. Constructed from high-durability materials designed to withstand both indoor environments and demanding outdoor exposure, this pendant kit expands your deployment capabilities, allowing cameras to be safely suspended from high ceilings, trusses, or industrial structures while maintaining clean cable management and structural integrity. Interface Type 1.5" NPS Thread Optics Alignment Pendant Mount Cost Efficiency System Native Protection Weather Proof Industrial Standard Interoperability & Design Engineered for versatility, the AXIS T94A01D Pendant Kit provides an adaptable transition from standard conduit pipes to specialized camera housings. By implementing an industry-standard 1.5" NPS thread configuration, this mounting kit allows integrators to pair compatible AXIS cameras directly with standard pendant arms, extension pipes, and wall mounts. The internal routing design guarantees that high-density Ethernet styling and internal cabling remain fully enclosed, preserving the clean architectural aesthetic of modern commercial installations while shielding vulnerable connection elements from environmental degradation and physical tampering. Heavy-Duty Construction Manufactured from premium impact-resistant materials to guarantee long-term operational integrity across demanding retail, logistical, and outdoor infrastructure environments. Integrated Cable Management Eliminates exposed wiring layouts by routing power and data lines internally through the extension infrastructure, significantly reducing risks associated with weather damage or intentional vandalism. Technical Specification Matrix Camera Model AXIS T94A01D Product Type Pendant Kit / Mounting Adapter Thread Interface 1.5" NPS Internal Thread Supported Hardware Compatible AXIS Fixed Dome Cameras Environment Indoor and Outdoor Rated Material Composition Impact-resistant Aluminum Alloy / Polymer Blend Color Configuration AXIS White Regulatory Approvals NDAA Compliant, TAA Certified Technical Datasheet Quick Start Guide Operation Manual Installation Manual What type of mounting pipes are compatible with the AXIS T94A01D? The AXIS T94A01D utilizes a standard 1.5" NPS thread configuration, making it compatible with matching NPS extension pipes, wall arms, and ceiling brackets natively or via appropriate adapters. Is this kit safe for high-exposure outdoor deployments? Yes. The kit is built from rugged, weather-resistant materials designed to protect the upper housing and structural mounting connections of compatible AXIS fixed domes from harsh environmental parameters. Does the pendant kit include integrated cables? No, the kit provides the structural pathing and spatial housing needed to safely route standard Ethernet and system cabling internally without exposing wires to external physical hazards. Is the AXIS T94A01D fully compliant with government purchasing regulations? Yes. This component is fully NDAA and TAA compliant, making it approved for secure installations across national infrastructure, federal properties, and strictly monitored enterprise environments. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $109.00

• 

  AXIS AXIS T94N01D Pendant Kit (01513-001)

   

  AXIS P37 SERIES · NDAA & TAA COMPLIANT Professional-Grade Panoramic Camera Mounting Bracket The AXIS T94N01D Pendant Kit is a high-density, commercial-grade mounting solution specifically engineered to bridge the AXIS P37 multi-directional panoramic camera series with standard 1.5″ NPS threaded brackets. Deployed heavily across logistics yards, multi-lane perimeter fences, transportation hubs, and corporate campuses, this kit allows critical multi-lens panoramic hardware to be positioned ideally at outer corners, rooftop parapets, and structural poles. Its high-premium architectural finish matches modern building aesthetics while maintaining structural rigidity against extreme outdoor variables. Compatibility AXIS P37 Series Optics / Thread 1.5″ NPS Interface Environment Indoor & Outdoor Ready Material Aluminium Shielding Advanced Weather Protection and Legacy Retrofitting Engineered with structural longevity in mind, this comprehensive pendant accessory features a high-grade matching weathershield alongside its mounting adapter matrix. The integrated design minimizes rain blur, glare, and particulate accumulation on the camera lens, ensuring the high-accuracy deep learning analytics of modern P37 panoramic modules remain uninterrupted. By matching legacy infrastructure mounting systems via the AXIS T94N01D Pendant Kit handle, enterprise security architects can seamlessly upgrade analog or single-sensor points into high-density multi-directional vantage points without replacing existing conduits, wall arms, or pole adapters. Universal 1.5″ NPS Integration Eliminates custom mounting headaches by directly mating multi-directional camera modules with industry-standard 1.5″ NPS threaded brackets, including AXIS T91 extensions, ceiling mounts, and wall arms. High-Durability Shielding Constructed from premium, impact-resistant aluminum with a matching outdoor-rated coat to block UV deterioration, redirect heavy precipitation, and prevent thermal loading under intense direct sunlight. Technical Specification Matrix Camera Model AXIS T94N01D Supported Hardware AXIS P37 Panoramic Series (P3717-PLE, P3719-PLE, P3727-PLE, P3735-PLE, P3737-PLE, P3738-PLE) Mounting Interface 1.5″ NPS Threaded Brackets / T91 Accessories Material Construction Premium Aluminium Alloy with Integrated Weathershield Environmental Capability Indoor and Outdoor Weatherproof Shielding Color Profile Axis White Dimensions Diameter: 244 mm (9.60″) x Height: 50 mm (1.96″) Manufacturer Warranty 3-Year Official AXIS Hardware Warranty Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS T94N01D compatible with third-party mounting poles? Yes. As long as the mounting accessory features a standard 1.5″ NPS threaded interface, the AXIS T94N01D will securely thread into position. For structural integrity, pairing with official AXIS T91 or TP series infrastructure is recommended. Does this pendant kit include the camera unit itself? No, this is a dedicated architectural mounting adapter kit that includes the weather protection shield and alignment plate. Cameras like the AXIS P3737-PLE must be purchased separately. Can this kit withstand harsh coastal environments? The kit features a premium, outdoor-rated aluminum alloy design that provides excellent resistance against standard environmental corrosion, wind-driven rain, and heavy UV exposure. Is this accessory certified under federal procurement rules? Yes, the AXIS T94N01D is strictly NDAA and TAA compliant, making it fully approved for implementation within federal, military, and high-security enterprise networks. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $189.00

• 

  AXIS AXIS T94M01D Pendant Kit (5505-091)

   

  AXIS ACCESSORIES · NDAA & TAA COMPLIANT Professional Mounting Infrastructure for Demanding Environments The AXIS T94M01D is a highly robust, premium-grade pendant kit designed to facilitate secure and versatile suspension mounting for select AXIS fixed dome cameras. Engineered with commercial-grade aluminum housing, it ensures absolute structural integrity in high-density corridors, transit hubs, and both indoor and challenging outdoor architectural landscapes. Integration Seamless Fit Optics Alignment Fixed Domes Thread Pattern 1.5" NPS thread Protection Weather Resistant Advanced Infrastructure Compatibility & Engineering Engineered with a universal focus, the AXIS T94M01D Pendant Kit features a standard 1.5” NPS thread interface, enabling direct compatibility with AXIS mounting poles, ceiling extensions, and wall brackets. Designed to protect cable connections from environmental hazards, moisture ingress, and intentional tampering, this kit ensures structural longevity and maintains the integrity of high-definition digital streams in enterprise-grade security network frameworks. Industrial Resilience & Materials Constructed with superior, weather-resistant aluminum material coated in an outdoor-durable white powder finish. This ensures structural resistance to corrosion, high impact, thermal expansion, and direct exposure to intense UV light. Simplified Installation Architecture The kit minimizes on-site deployment labor by incorporating integrated routing pathways for internal cabling, protecting network lines and power feeds seamlessly from physical access while streamlining setup overhead. Technical Specification Matrix Camera Model AXIS T94M01D Product Type Pendant Kit / Mount Adapter Threading Compatibility 1.5" NPS standard thread Material Powder-coated Aluminum Color White (AXIS White) Environment Indoor and Outdoor certified Compliance NDAA and TAA compliant Technical Datasheet Quick Start Guide Operation Manual Installation Manual Is the AXIS T94M01D suitable for outdoor installations? Yes, the AXIS T94M01D is constructed from high-durability, weather-resistant aluminum alloy with a powder-coated finish designed to withstand prolonged exposure to complex outdoor conditions. What pipe thread does the AXIS T94M01D use? This pendant kit incorporates a standardized 1.5-inch NPS internal thread format, rendering it fully compatible with various industry-standard brackets and custom extension poles. Does the pendant kit hide standard Ethernet cables? Yes, the interior design features a dedicated conduit path that securely encloses standard Ethernet and supplementary I/O cables, shielding them from tampering and elements. Is this mount NDAA and TAA compliant? Absolutely. The AXIS T94M01D is fully compliant with NDAA (National Defense Authorization Act) and TAA requirements, qualifying it for use in high-security federal and infrastructure deployments. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $129.00

• 

  AXIS AXIS TM3101 Pendant Wall Mount (01742-001)

   

  AXIS TM3101 · NDAA & TAA COMPLIANT Discreet, Architectural-Grade Mount for Mini Fixed Dome Cameras The AXIS TM3101 Pendant Wall Mount delivers a sophisticated, professional finish to indoor surveillance installations. Designed to integrate seamlessly with the modern aesthetics of retail spaces, offices, and high-end commercial interiors, this accessory features an elegant profile with completely concealed mounting screws and internal cable routing. By mimicking a clean pendant style directly from the wall, the TM3101 eliminates visual clutter while keeping security infrastructure clean, professional, and physically protected. Compatibility M20, M30, M31, M42 Integrated Storage Device Compartment Environment Indoor Flush Mount Sustainability PVC-Free / 22% Recycled Innovative Storage & Directional Versatility Beyond aesthetics, the AXIS TM3101 Pendant Wall Mount serves as an operational hub. It is engineered with a built-in, ingress-protected storage compartment that safely houses vital connectivity accessories, including the AXIS T6101 Audio & I/O Interface, AXIS Device Microphone A, or AXIS T8643 PoE+ over Coax compact adapters. This design empowers operators to add advanced high-fidelity audio capture and network conversion tools directly at the camera's mounting point without cluttering the ceiling line. Highly adaptable, the TM3101 can be mounted on walls, counters, or hard ceilings—making it the ideal choice for entrance analytics, facial recognition, and retail checkout point-of-sale monitoring. Paintable, Seamless Wall Integration The contemporary casing has no visible mounting screws or cables, giving it a streamlined appearance that appears as an extension of the wall. Constructed with premium eco-friendly materials, the plastic cover can easily be repainted to perfectly match your establishment's interior brand palette. Optimized Placement for Retail Analytics Install the bracket in varying orientations—including downward-facing angles over doorways—to optimize the field of view for high-accuracy retail intelligence, such as automated people-counting and facial recognition software. Technical Specification Matrix Camera Model AXIS TM3101 Supported Products AXIS M20, M30, M31, and M42 Series Casing Material PC/ABS cover; Glass fiber-reinforced polyamide bottom bracket Maximum Load Capacity 1.5 kg (3.3 lbs) Physical Dimensions 175 x 124 x 39 mm (6.9 x 4.9 x 1.5 in) Weight 159 g (0.35 lb) Sustainability PVC-free, composed of 22% recycled plastics Operating Conditions -10 °C to 50 °C (14 °F to 122 °F), Humidity 10–85% RH (non-condensing) Manufacturer Warranty 5-Year AXIS Limited Hardware Warranty Technical Datasheet Quick Start Guide Operation Manual Installation Manual Which cameras are compatible with the AXIS TM3101 mount? The TM3101 is specifically designed for indoor mini fixed dome network cameras. This includes the AXIS M20, M30, M31, and M42 Series. It is also compatible with the AXIS P39 Series when the camera is not intended for onboard vehicle use. What accessories can fit inside the integrated compartment? The secure, integrated back-compartment is designed to cleanly house network and audio additions. Recommended accessories include the AXIS T6101 Audio and I/O Interface, AXIS Device Microphone A, and the AXIS T8643 PoE+ over Coax Compact unit. Can this mount be installed outdoors or in harsh environments? No, the AXIS TM3101 is strictly rated for indoor environments. It features an operating temperature range of -10 °C to 50 °C (14 °F to 122 °F) and does not carry weatherproof IP ratings required for outdoor exposures. Can I paint the AXIS TM3101 to match my interior walls? Yes. The exterior plastic PC/ABS cover can easily be painted with standard plastic-safe paint. This allows you to completely customize the aesthetic to blend seamlessly with any wall color or retail background. Official AXIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $99.00

• 

  Dahua Dahua DH-PFA114 — Camera Mount Adapter

   

  Genuine Dahua · Mount Adapter · AluminiumDahua DH-PFA114The Link Between Your Camera and Its Bracket The Dahua DH-PFA114 is a genuine aluminium mount adapter that connects your camera to a wall or ceiling bracket. Compact and strong, it makes for a tidy, secure install in almost any environment. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Connects camera to bracket — pairs cameras with wall or ceiling mount brackets. Aluminium-alloy build — strong, corrosion-resistant and lightweight at 0.15 kg. 7kg load capacity — securely holds the camera in place. G1½ thread — standard fitment for fast, reliable installation. Specifications Model DH-PFA114 Category Camera Mount Adapter Material Aluminium Alloy Dimensions 79.0 × 72.0 × 50.0 mm (3.11" × 2.84" × 1.97") Net Weight 0.15 kg (0.33 lb) Load Bearing 7.0 kg (15.43 lb) Thread Type G1½ Operating Temperature −40°C to +60°C Colour White Warranty 3 Years (AU) DH-PFA114 Datasheet Frequently Asked Questions What is the PFA114 for?It's an adapter that joins a camera to a wall or ceiling mount bracket — check your Dahua camera's accessory selection guide to confirm the PFA114 is listed. Can it be used outdoors?Yes — it's rated −40°C to +60°C and built from corrosion-resistant aluminium alloy. What thread does it use?It uses a standard G1½ thread for connecting to compatible Dahua brackets. Is this a genuine Dahua part?Yes — this is the genuine Dahua DH-PFA114 aluminium mount adapter.

  Read more less

   

  $19.00

• 

  Dahua Dahua DH-PFA126 — Waterproof Junction Box

   

  Genuine Dahua · Junction Box · IP66 AluminiumDahua DH-PFA126Tidy, Weatherproof Cable Management for Your Camera The Dahua DH-PFA126 is a genuine IP66-rated aluminium junction box that hides and protects your camera cabling for a clean, professional finish. Its quick-install, anti-dropping design makes mounting fast and safe, indoors or out. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It IP66 weatherproof — sealed against dust and rain for reliable outdoor use. Aluminium-alloy build — strong, corrosion-resistant and built to last. 8kg load capacity — securely supports the camera and its bracket. Quick, anti-drop install — fast to fit with a safe anti-dropping structure. Specifications Model DH-PFA126 Category Camera Junction Box Material Aluminium Alloy IP Rating IP66 Dimensions 228.4 × 160.4 × 84.7 mm (8.99" × 6.31" × 3.33") Weight 1.56 kg (3.44 lb) Load Bearing 8.0 kg (17.64 lb) Operating Temperature −40°C to +60°C Colour White Warranty 3 Years (AU) DH-PFA126 Datasheet Frequently Asked Questions Is it suitable for outdoors?Yes — it's IP66 rated and operates from −40°C to +60°C, ideal for outdoor camera installs. Which cameras does it fit?It's a camera-mount junction box — check your Dahua camera's accessory selection guide to confirm the PFA126 is listed. What's in the box?The junction box, M8 screws and metal expansion bolts, two water joints, a wrench and instructions. Is this a genuine Dahua part?Yes — this is the genuine Dahua DH-PFA126 aluminium junction box.

  Read more less

   

  $89.00

• 

  Dahua Dahua DH-VTM115 — Surface Mount Box for Video Door Stations

   

  Genuine Dahua · Surface Mount Box · AluminiumDahua DH-VTM115Surface-Mount Your Dahua Video Door Station The Dahua DH-VTM115 is a genuine aluminium surface-mounting box for Dahua VTO video door stations. It lets you mount a flush-design door station neatly onto a wall surface, with a waterproof gel pad and sealing rings included for a weather-resistant outdoor install. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Surface-mount conversion — mounts a flush-design Dahua VTO door station onto a wall surface. Weather-resistant — includes a waterproof silica gel pad and sealing rings for outdoor use. Durable AL5052 aluminium — strong 2.0mm aluminium-alloy box built to last. Complete fixing kit — supplied with expansion screws, self-tapping screws and waterproof rings. Specifications Model DH-VTM115 Category Surface Mount Box (Video Door Station) Material AL5052 Aluminium Alloy (2.0mm) Dimensions 129.0 × 95.0 × 28.5 mm (5.08" × 3.74" × 1.12") Application Surface mounting for Dahua VTO video door stations Warranty 3 Years (AU) DH-VTM115 Datasheet Frequently Asked Questions What is the VTM115 for?It's a surface-mounting box that lets a flush-design Dahua VTO video door station be mounted on a wall surface. Check your VTO model's mounting spec to confirm the VTM115 is listed. Is it suitable for outdoors?Yes — it ships with a waterproof silica gel pad and sealing rings for a weather-resistant outdoor installation. What's included for installation?Expansion screws, ST4×25 self-tapping screws, waterproof rings and M3×8 fixing screws, per the datasheet. Is this a genuine Dahua part?Yes — this is the genuine Dahua DH-VTM115 aluminium surface-mount box.

  Read more less

   

  $29.00

• 

  UNV UNV TR-UF45-K-IN — Multi-Directional Camera Pendant & Wall Mount Adapter

   

  Genuine UNV · Mount Adapter · Aluminium AlloyUNV TR-UF45-K-INMount Your Multi-Directional Camera, Pendant or Wall The UNV TR-UF45-K-IN is a genuine Uniview aluminium-alloy mounting adapter for four-eyes multi-directional VF dome cameras. It supports both pendant (ceiling) and wall mounting, giving installers a strong, versatile base for multi-sensor cameras indoors or outdoors. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Pendant & wall mounting — one adapter supports both ceiling pendant and wall installs. Built for multi-directional cameras — designed for four-eyes multi-sensor VF dome cameras. Aluminium-alloy build — strong, corrosion-resistant and durable at just 1.3 kg. Indoor or outdoor — suitable for a wide range of installation environments. Specifications Model TR-UF45-K-IN Category Camera Mount Adapter Application Multi-sensor VF dome camera — pendant & wall mount Material Aluminium Alloy Dimensions Ø 318 × 116 mm (Ø 12.5" × 4.6") Weight 1.3 kg (2.9 lb) Environment Indoor or Outdoor Warranty 3 Years (AU) Frequently Asked Questions Which cameras does it fit?It's designed for Uniview four-eyes multi-directional (multi-sensor) VF dome cameras — check your camera's mounting spec to confirm the TR-UF45-K-IN is listed. Can I pendant and wall mount with it?Yes — this adapter supports both pendant (ceiling) and wall mounting. Can it be used outdoors?Yes — it's rated for indoor or outdoor installation. Is this a genuine Uniview part?Yes — this is the genuine Uniview TR-UF45-K-IN aluminium-alloy mounting adapter.

  Read more less

   

  $39.00

• 

  Dahua Dahua DH-PFB301C — Ceiling Mount Bracket for PTZ Cameras

   

  Genuine Dahua · Aluminium Alloy · PTZ Ceiling Mount Dahua PFB301C A Clean, Professional Ceiling Mount for Dahua PTZ Cameras Mount your camera the right way with the Dahua DH-PFB301C Aluminium Ceiling Mount Bracket. This genuine Dahua accessory pairs a strong, lightweight aluminium-alloy build with concealed cable routing and a simple, elegant design — for a tidy, secure ceiling installation that looks the part. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Genuine Dahua aluminium alloy — strong, corrosion-resistant and lightweight at just 0.21 kg. Concealed cable routing — hides cabling inside the mount for a clean, professional finish. Wide temperature range — rated −40°C to +60°C for indoor and sheltered outdoor use. Simple, elegant design — quick ceiling installation engineered for Dahua PTZ cameras. Specifications Model DH-PFB301C Category Ceiling Mount Bracket Material Aluminium Alloy Dimensions φ128.8 × 35.5 mm (5.07" × 1.40") Net Weight 0.21 kg Operating Temperature −40°C to +60°C Mounting Ceiling Warranty 3 Years (AU) DH-PFB301C Datasheet Frequently Asked Questions Which cameras does it fit?It's designed as a ceiling mount for Dahua PTZ cameras and compatible mounts — check your camera's installation guide to confirm the PFB301C is listed. Can I use it outdoors?Yes — it's rated −40°C to +60°C, suitable for indoor and sheltered or covered outdoor positions. Does it hide the cabling?Yes — the bracket features concealed cable routing for a tidy, professional finish. Is this a genuine Dahua part?Yes — this is the genuine Dahua DH-PFB301C aluminium-alloy ceiling mount bracket.

  Read more less

   

  $19.00

• 

  Dahua Dahua DH-PFA7711 — Camera Mount Adapter

   

  Genuine Dahua Accessory The Dahua PFA7711 is a genuine aluminium mount adapter with a G1½" pipe thread, designed to connect compatible Dahua cameras and brackets to pole, pendant and wall mounts. Its clean, aesthetic white finish blends with Dahua housings, while the corrosion-resistant aluminium body is rated from –40 °C to +60 °C for reliable indoor and outdoor installs across Australia. Genuine Dahua Part Fast AU-Wide Shipping AU Tech Support Specifications Type Camera Mount Adapter Casing Material Aluminium Pipe Thread G1½" Product Dimensions Φ53 mm × 47.8 mm (Φ2.09" × 1.88") Weight 0.14 kg (0.31 lb) Colour White Operating Temperature –40 °C to +60 °C (–40 °F to +140 °F) Humidity < 90% RH In the Box Mount adapter × 1 PFA7711 Datasheet What thread does the PFA7711 use?It has a G1½" pipe thread, the standard fitting for connecting Dahua cameras and brackets to pole, pendant and wall mounts. Is the PFA7711 suitable for outdoor use?Yes. The aluminium body is corrosion resistant and rated from –40 °C to +60 °C with up to 90% humidity, making it suitable for sheltered outdoor installs. Which cameras is it compatible with?The PFA7711 fits Dahua models listed under the Camera Accessories Selection guide. If you're unsure, contact our Australian support team with your camera model and we'll confirm compatibility.

  Read more less

   

  $19.00

• 

  IDIS IDIS DA-CM2050 Heavy-Duty Surveillance Camera Ceiling Mount Bracket

   

  IDIS VIDEO SURVEILLANCE · STRUCTURAL OVERHEAD MOUNTING HARDWARE · NDAA & TAA COMPLIANT Industrial-Grade Structural Overhead Ceiling Mounting Bracket The IDIS DA-CM2050 is a rugged, commercial-grade overhead ceiling mount bracket precision-engineered to suspend IDIS dome, bullet, or PTZ camera systems from structural slabs, concrete ceilings, and exposed roof beams. When wall-mounting isn't an option due to open architectural layouts, large warehouses, or glass curtain walls, dropping a camera vertically from overhead infrastructure provides an ideal, high-angle viewing perspective. This solid steel bracket establishes a rock-solid mechanical anchor point that eliminates unstable swaying, keeping your surveillance frames steady and aligned. Mounting Class Overhead Vertical Drop Core Metal Reinforced Structural Steel Total Length 251.5 mm Fixed Arm Profile Sourcing Class NDAA & TAA Certified Vandal-Resistant Wiring Protection with Internal Conduit Channels High-exposure public areas demand infrastructure that resists environmental forces and manual tampering. Constructed out of premium thick steel, the IDIS DA-CM2050 features a completely hollow core extension arm that acts as a secure wiring conduit. Power pigtails, audio loops, and RJ45 network cables feed from the structural ceiling base straight down through the center tube into the camera housing. This interior routing shields critical network cabling from moisture, dust build-up, and malicious cutting or pulling attempts by vandals. Pre-Drilled Broad Footprint Base Plate The upper base plate features a heavy, wide-set anchor layout designed to spread load forces evenly across concrete decks or steel pillars. This design maximizes stability and ensures compliance with commercial construction rules. Anti-Corrosive Industrial Powder Barrier The entire steel structure is sealed with a UV-stabilized, architectural matte white powder finish. This specialized shield prevents paint flaking, yellowing, or rust creeping, keeping installations looking clean over time. Technical Specification Matrix Accessory Model Identifier DA-CM2050 Mechanical Component Type Surveillance Camera Fixed Extension Ceiling Mount Bracket Structural Body Material Premium Heavy-Duty Structural Steel Alloy Composition Surface Protective Shield UV-Stabilized Industrial Exterior-Grade White Powder Coating Total Extension Length 251.5 mm (9.90") Base Plate Diameter Ø 120.0 mm (4.72") Net Structural Weight 0.74 kg (1.63 lbs) Cabling Protection Pathway Center-Bore Hollow Tube Pass-Through for Full Cable Shielding Mounting Environment Match Suitable for Heavy Indoor public areas or Covered Outdoor Zones Compatible Companions Mates with IDIS Junction Boxes, Pendant Caps, and Adapter Plates Inclusions Within Kit Heavy Machine Locking Screws, Base Isolation Gasket, Anchor Screws Federal Sourcing Certification Fully Certified NDAA Compliant Frameworks & TAA Manufacturing Protocols Can I bolt a dome camera directly to the bottom plate of the DA-CM2050? The DA-CM2050 features a standardized structural attachment pattern. Depending on your camera model, you may need a matching pendant mount cap (like the DA-PTX series) or an adapter plate (like the DA-MA2100) to bridge the camera base to the extension arm securely. Are the concrete expansion masonry bolts included with this bracket package? The kit includes the heavy machine screws required to join the bottom bracket plate to its companion IDIS camera components. The structural anchors or expansion bolts used to secure the upper plate to the ceiling are sold separately so you can select the correct hardware for your specific ceiling material (concrete, solid timber beams, or structural steel flanges). Is this ceiling mount rust-proof if installed under an exterior outdoor awning? Yes. The rugged steel build is treated with a specialized, UV-cured outdoor white powder finish that resists moisture and humidity, making it an excellent choice for covered walkways, transport hubs, and loading bays. Can this fixed arm hold the full weight of an enterprise PTZ speed dome camera? Yes. Weighing 0.74 kg and built from heavy structural steel, this bracket easily supports heavy enterprise PTZ housings. Just ensure your overhead building surface can safely bear the combined load before completing installation. Dimension Profile Installation Sheet Genuine IDIS Hardware NDAA & TAA Certified Fast Shipping Australia-Wide

  Read more less

   

  $149.00

• 

  IDIS IDIS DA-MA2100 Surveillance Camera Mounting Adapter

   

  IDIS VIDEO SURVEILLANCE · COMMERCIAL EXTENSION MOUNTING HARDWARE · NDAA & TAA COMPLIANT Precision-Engineered Aluminum Camera Mounting Adapter Plate The IDIS DA-MA2100 is an industrial-grade structural mount adapter plate engineered to provide a flush, highly stable mechanical interface between IDIS security camera housings and various companion installation brackets. When installing high-performance surveillance hardware, mismatched mounting alignments can compromise structural integrity or leave internal wiring vulnerable. This rugged adapter eliminates mounting layout discrepancies by translating complex base configurations into clean, standardized bolt arrays, allowing installers to anchor dome or bullet cameras directly to wall mounts, pendant caps, or weatherized junction boxes without modification. Adapter Function Multi-Bracket Alignment Core Metal Premium Aluminum Alloy Unit Weight 0.24 kg Lightweight Build Sourcing Class NDAA & TAA Certified Rugged Vandal Shielding & Streamlined Network Cable Pass-Through Constructed out of high-pressure die-cast aluminum alloy, the IDIS DA-MA2100 provides an exceptional strength-to-weight ratio that easily bears the structural load of heavy, motorized varifocal camera housings. The flat adapter body is built with a deep central cavity path that serves as an internal conduit channel for power jacks, audio loops, and RJ45 Ethernet couplers. By routing sensitive data connections safely through the core of the adapter plate rather than running them along outside walls, your surveillance system is kept safe from environmental corrosion, moisture entry, and malicious cutting or physical vandalism attempts. Pre-Drilled Countersunk Fitting Tracks The layout features factory-machined, threaded hole configurations that fit perfectly with specific IDIS bracket housings. This ensures clean balance and tight alignment without modifying parts or drilling random holes on site. Anti-Corrosive Industrial Powder Barrier The thick aluminum body is covered in a specialized, UV-stabilized matte white powder finish. This durable shell prevents peeling, chalking, and salt-air oxidation, keeping the assembly looking clean for years. Technical Specification Matrix Accessory Model Identifier DA-MA2100 Mechanical Component Type Surveillance Camera Mounting Adapter Plate Structural Shell Material Premium Die-Cast Aluminum Alloy Composition Surface Protective Shield UV-Stabilized Industrial Exterior-Grade White Powder Coating Physical Outer Diameter Ø 149.0 mm (5.87") Physical Depth Profile 41.5 mm (1.63") Net Structural Weight 0.24 kg (0.53 lbs) Mount Compatibility Design Pre-machined Sub-surface Patterns for Flush Component Mating Cabling Protection Pathway Wide Center Cable Pass-Through Void for Connector Bundles Environmental Air Profile Suitable for Heavy Indoor or Fully Weather-exposed Outdoor Areas Inclusions Within Kit Industrial Machine Mounting Screws, Structural Alignment Hardware Federal Sourcing Certification Fully Certified NDAA Compliant Frameworks & TAA Manufacturing Protocols Why do I need the DA-MA2100 mount adapter instead of anchoring the camera directly to a wall? The DA-MA2100 acts as a structural bridge. Certain dome security cameras feature specialized base tracking screw footprints that cannot latch directly onto standard wall mount arms (like the DA-WM2050) or pole adapters. This adapter plate screws to the camera base first, giving it a standard hole alignment pattern that anchors flush against your main mounting hardware. Does this adapter plate include the exterior rubber gaskets? The DA-MA2100 is a precision aluminum mating plate designed to align hardware components flush against each other. Weatherproofing gaskets and seals are usually included with the primary camera housing or companion junction boxes to ensure a tight, sealed assembly. Is the metal plate rust-resistant when installed on exposed marine shorelines? Yes. Because the adapter is cast from high-grade aluminum alloy and sealed with an industrial-grade, UV-cured white powder coat, it provides excellent protection against harsh corrosion, moisture, and salt-air oxidation without staining architectural walls. Are the machine screws needed to lock the camera to this plate included? Yes. The kit comes with the exact factory machine screws required to secure the adapter plate to its compatible IDIS camera series and companion mounting hardware, ensuring a tight, reliable fit right out of the box. Dimension Drawing Installation Profile Genuine IDIS Component NDAA & TAA Certified Fast Shipping Australia-Wide

  Read more less

   

  $99.00

• 

  IDIS IDIS DA-JB2200 Waterproof Surveillance Camera Junction Box

   

  IDIS VIDEO SURVEILLANCE · IP66 WEATHERPROOF MOUNTING ACCESSORIES · NDAA & TAA COMPLIANT Heavy-Duty Weatherproof Aluminum Camera Junction Box Base The IDIS DA-JB2200 is a commercial-grade, weather-sealed surveillance junction box designed to isolate, protect, and cleanly conceal sensitive network camera electrical connections. Exposed RJ45 network terminators, pigtail connectors, and power lines are highly susceptible to oxidation, moisture short-circuits, and physical tampering when left unprotected on exterior walls. This heavy-duty terminal enclosure serves as a structural shield, providing an interior vault that isolates data lines from harsh environments while acting as a rigid, load-bearing anchor surface for compatible IDIS dome and bullet security cameras. Weather Rating Waterproof Seal Design Core Metal Heavy Aluminum Alloy Conduit Entry Standard NPT Thread Ports Sourcing Class NDAA & TAA Certified Advanced Ingress Protection & Streamlined Commercial Installation Engineered to handle harsh architectural applications, the IDIS DA-JB2200 features a precision-molded aluminum alloy frame that naturally resists corrosion and mechanical impacts. The interior chamber is fully lined with high-elasticity rubber gaskets that lock out driving rain, melting ice, humidity, and micro-dust particles. Built-in conduit ports allow technicians to link up threaded EMT or flexible liquid-tight piping directly to the box, ensuring a completely sealed wiring run from the backbone network straight to the camera sensor. This structural layout cuts down on installation labor and eliminates unsightly exposed wires that vandals could exploit. Precision Universal Face Plate Templates The layout features factory-machined, threaded hole circles that fit perfectly with specific IDIS outdoor dome and bullet camera brackets. This ensures clean balance and tight alignment without drilling random holes on site. Anti-Corrosive Industrial Powder Barrier The thick aluminum body is covered in a specialized, UV-cured matte white powder finish. This durable shell prevents peeling, chalking, and salt-air oxidation, keeping the assembly looking clean for years. Technical Specification Matrix Accessory Model Identifier DA-JB2200 Enclosure Accessory Type Weatherproof Surveillance Camera Junction Box / Mounting Base Structural Shell Material Premium Die-Cast Aluminum Alloy Composition Surface Protective Shield UV-Stabilized Industrial Exterior-Grade White Powder Coating Physical Face Diameter Ø 141.0 mm (5.55") Physical Depth Profile 47.5 mm (1.87") Net Assembly Weight 0.54 kg (1.19 lbs) Ingress Protection Ceiling Waterproof Gasket Seals for High-Exposure Weather Deployments Conduit Interface Ports Threaded NPT Connection Points with Removable Seal Plugs Compatible IDIS Camera Series Designed for IDIS Fixed Dome & Select Outdoor Bullet Cameras Wall Anchorage Design Multi-Slot Rear Mounting Base for Heavy Surface Anchors Inclusions Within Kit Weather-Sealing Gaskets, Interior Grounding Lug, Camera Mounting Screws Federal Sourcing Certification Fully Certified NDAA Compliant Frameworks & TAA Manufacturing Protocols Does the DA-JB2200 include pipe adapters for liquid-tight conduit? The junction box features standard threaded NPT port paths and comes with weather-tight metal blanking plugs installed. Standard trade conduit fittings or liquid-tight adapters screw straight into these ports, but the specific conduit fittings themselves are sold separately to match your plumbing plan. Is this junction box compatible with the DA-RM2000 corner adapter? Yes. The hole configurations on the back base plate of the DA-JB2200 match the threaded front patterns of the DA-RM2000 corner plate and the companion pole mount structures, creating an integrated mounting system for complex commercial spaces. Can I use this bracket base in coastal marine environments? Yes. The combination of high-grade die-cast aluminum alloy and a thick, UV-stabilized industrial powder-coated layer provides exceptional resistance to moisture, oxidation, and salt air without corroding or staining the wall below. How do I ensure the IP weatherproof seal stays tight during installation? To preserve the waterproof seal, make sure the interior rubber gaskets are seated flat in their tracks before tightening the faceplate screws. For high-exposure outdoor walls, running a thin bead of industrial silicone sealant along the top edge where the box meets rough masonry surfaces provides excellent extra protection. Dimension Profile Installation Sheet Genuine IDIS Stock NDAA & TAA Certified Aust-Wide Express

  Read more less

   

  $129.00

• 

  IDIS IDIS DA-FM1500 Ceiling Flush Mount

   

  IDIS ACCESSORIES · NDAA & TAA COMPLIANT Architectural Integration for Premium Commercial Environments The IDIS DA-FM1500 is an enterprise-grade ceiling flush mount designed to transform standard surface dome cameras into sleek, ultra-low-profile security solutions. Engineered for premium retail spaces, high-end corporate lobbies, banks, and modern commercial interiors, this flush mount ensures your high-density surveillance infrastructure blends seamlessly with sophisticated architectural designs without sacrificing optical coverage or structural integrity. Application Ceiling Flush Mount Form Factor Ø210.2mm Outer Rim Material Premium EGI & Plastic Compliance NDAA & TAA Certified Advanced Cable Management and Low-Profile Deployment Achieve a highly professional, uncluttered look with advanced integrated cable routing pathways. The IDIS DA-FM1500 Flush Mount hides complex wiring grids behind the ceiling plane, providing superior protection against physical tampering and environmental debris. By leaving only the essential dome optical assembly exposed, this bracket reduces visual disruption and prevents vandals from grasping or re-directing the hardware, establishing a secure baseline for your network security platform. Heavy-Duty Construction Manufactured using high-strength Electro-Galvanized Iron (EGI) and premium structural plastic composite polymers, this housing delivers long-term resistance against warping and sagging. The composition offers physical rigidity while remaining lightweight at just 0.65 kg, keeping aggregate ceiling stresses well within safe commercial building regulations. Discreet, Clean Aesthetics Finished in a resilient architectural off-white coating, the exposed face seamlessly matches industry-standard commercial acoustic ceiling tiles and drywall treatments. It lowers the physical footprint of supported dome cameras by sinking the chassis base deep into the interstitial ceiling space, creating a flush, tamper-resistant viewport. Technical Specification Matrix Camera Model DA-FM1500 Material Structure Electro-Galvanized Iron (EGI) & Structural Polymer Plastic Color / Finish Architectural Off-White Max. Exposed Dimension Ø210.2mm x 78.1mm (H) (Ø8.27" x 3.07") Installation Cut-out Dimension Ø191.0mm x 63.9mm (H) (Ø7.52" x 2.52") Total Weight 0.65 kg (1.44 lbs) Application Environment Indoor Drywall & Suspended Acoustic Ceilings Broad Compatibility Matrix DC-D4236X(-A), DC-D4236RX(-A), DC-D4536RX, DC-D4236WRX, DC-D4236HRX, DC-D4536HRX, DC-D4831HRX, TC-D5531RX, TC-D5531RXP, TC-D5532RX, TC-D5531WRX, TC-D5531WRXP, TC-D5532WRX, TC-D4222RX, TC-D4221RXP, TC-D4222WRX, TC-D4221WRXP Is the IDIS DA-FM1500 bracket completely NDAA compliant? Yes, the IDIS DA-FM1500 is fully NDAA and TAA compliant. It contains no prohibited telecommunications or restricted chipsets, making it fully approved for high-security United States government facilities, defense deployments, and enterprise commercial builds. What tools or cutout sizes are required for ceiling installation? The installation requires a standard circular ceiling cutout with a diameter of 191mm (7.52"). The bracket assembly sits deep within an interstitial space clearance depth of at least 64mm, leaving an elegant, minimalist 78.1mm exposed rim once locked. Can this mount be used in outdoor soffits or exposed weather damp zones? The DA-FM1500 is specifically engineered for internal commercial environments. For external soffits, high-moisture parking garages, or weather-exposed ceilings, please contact our engineering support team to review matching marine-grade or IP-rated weather boxes. Which specific IDIS camera models are supported by this mounting plate? It natively fits a vast selection of IDIS fixed dome cameras including the enterprise DC-D4236, DC-D4536, DC-D4831, and TC-D5531 series variants. Please verify your exact model profile against our comprehensive technical specification matrix row before processing. Technical Datasheet Quick Start Guide Operation Manual Installation Manual Official IDIS Stock NDAA & TAA Certified Aust-Wide Delivery

  Read more less

   

  $219.00

• 

  TP-Link TP-Link VIGI VJB-300 — Junction Box for Dome Cameras

   

  Genuine TP-Link · Junction Box · Concealed CablingTP-Link VJB-300A Clean, Professional Finish for Your VIGI Dome Cameras The TP-Link VIGI VJB-300 Junction Box is a purpose-built mounting accessory that gives your VIGI dome camera installation a neat, professional finish. By concealing cables within the wall or ceiling, it removes exposed wiring and provides a secure, weatherproof entry point, ideal for both indoor and outdoor deployments across Australian homes and businesses. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Concealed Cable Management — Hides and protects cabling for a clean, professional installation on walls and ceilings. Maintains Weatherproofing — Provides a sealed cable entry point that helps preserve the IP weatherproofing integrity of the camera. Indoor & Outdoor Ready — Durable plastic construction suited to both interior and exterior use across Australian conditions. Discreet Compact Design — Low-profile white housing blends into any environment for an unobtrusive finish. Specifications Model VJB-300 Category Junction Box Material High-quality plastic Colour White Mounting Wall / Ceiling Suitable For Indoor & Outdoor Compatible With Compatible TP-Link VIGI dome cameras Warranty 3 Years (AU) Frequently Asked Questions Which VIGI cameras is the VJB-300 compatible with?The VJB-300 is designed for use with compatible TP-Link VIGI dome cameras. Check the TP-Link compatibility list or contact us to confirm fitment with your specific camera model. Does the VJB-300 affect the camera's weatherproof rating?When correctly installed, the VJB-300 helps maintain the camera's IP weatherproofing by providing a sealed cable entry point, protecting against moisture and dust ingress. Can I use the VJB-300 for outdoor installations in Australia?Yes. The VJB-300 is suitable for outdoor use and is built to withstand typical Australian weather conditions when installed correctly. Do I need any special tools to install the VJB-300?No special tools are required. Standard tools such as a drill and screwdriver are sufficient, making it straightforward for both professional installers and confident DIYers.

  Read more less

   

  $59.00

• 

  AXIS AXIS TP4601-E Outdoor Conduit Back Box 02750-001

   

  Elite Vandal Resistance (IK11) AXIS TP4601-E Outdoor Conduit Back Box 02750-001 The AXIS TP4601-E (02750-001) is a heavy-duty mounting accessory designed for high-risk environments. It provides a secure, weather-sealed compartment to house connectivity accessories like IP-over-Coax adapters or network couplers. With an IK11 impact rating—which exceeds the industry-standard IK10—this back box offers maximum protection against deliberate tampering and physical damage. Storage Internal Compartment Impact IK11 Vandal-Proof Rugged Reliability for P47 & Q9307-LV Accessory Storage Space Clean up your installations by storing cable slack, network couplers, or specialized adapters (like the T8645 PoE+ over Coax) directly inside the mount, protected from the elements. Highest Impact Rating The IK11 rating ensures the housing can withstand significant mechanical impact, making it ideal for prisons, schools, and urban areas prone to vandalism. Weather-Sealed Protection Rated IP66 and IP67, the back box prevents water ingress from high-pressure jets and temporary immersion, keeping your internal connections dry and functional. Professional Aesthetics The powder-coated aluminum finish and integrated 3/4” (M25) conduit entries ensure that even complex outdoor wiring looks sleek and stays secure. Technical Specifications SKU 02750-001 Impact Rating IK11 (Exceeds IK10) Ingress Protection IP66, IP67, NEMA 4X Material Powder-coated Aluminum Conduit Entry 3/4” / M25 (side and back) Maximum Load 2.3 kg (5 lb) Dimensions 140.4 x 215.1 x 53.5 mm Technical Resources Product Specs Official Datasheet Manufacturer Axis Portal

  Read more less

   

  $299.00

• 

  AXIS AXIS T91A64 Aluminum Corner Bracket 5017-641

   

  Professional Mounting Accessory AXIS T91A64 Aluminum Corner Bracket 5017-641 The AXIS T91A64 (5017-641) is a high-quality aluminum bracket specifically designed for mounting Axis network cameras on external corners. This robust accessory is ideal for both indoor and outdoor environments, providing a professional finish and long-term durability for demanding surveillance installations. To complete the setup, a compatible wall mount (such as the AXIS T91B6 or T91H61) is required. Capacity 25 kg (55 lb) Material Aluminium Robust External Corner Solution Heavy-Duty Construction Manufactured from high-grade aluminum, the T91A64 is built to withstand harsh environmental conditions, making it suitable for exposed outdoor perimeters and industrial sites. IK10-Rated Impact Resistance Tested to IEC 62262 IK10 standards, this bracket provides maximum protection against impact and vandalism, ensuring your camera remains securely mounted in high-risk areas. Flexible Compatibility Designed to work seamlessly with Axis wall mounts. It is commonly used for large PTZ cameras like the AXIS Q60 and P55 series, as well as fixed domes using pendant kits. Ease of Installation The bracket features a pre-drilled pattern that simplifies alignment on external corners, reducing installation time while maintaining a robust and safe structural fit. Technical Specifications SKU 5017-641 Maximum Load 25 kg (55 lb) Weight 1250 g (2.8 lb) Impact Rating IK10 (IEC 62262) Environment Indoor / Outdoor Compatibility AXIS T91B/D/G/H Wall Mounts Dimensions 184 x 170 mm (7.2 x 6.7 in) Technical Resources Product Specs Official Datasheet Manufacturer Axis Portal

  Read more less

   

  $169.00

• 

  IDIS IDIS DA-JB2500 Camera Junction Box | Genuine IDIS Accessory

   

  Genuine IDIS Accessory · Made in Korea IDIS DA-JB2500 — Camera Junction Box The IDIS DA-JB2500 is the official die-cast aluminium junction box designed to mount directly under IDIS Lite Series dome and turret cameras. It conceals the Cat6/PoE cable joint inside a fully sealed enclosure, provides extra physical protection at the wall or ceiling interface, and gives Australian installers the clean, professional finish expected on commercial, retail, education and government CCTV projects. Manufactured in Korea from ADC12 die-cast aluminium with a white powder-coat finish to match the IDIS camera body, the DA-JB2500 stands up to UV, salt-spray, dust and temperature swings — making it the go-to junction box for exposed eaves, awnings, and concrete soffit installs. Accessory Camera Junction Box Material ADC12 Die-Cast · White Dimensions 135 × 133 × 58 mm Weight 0.595 kg Compatibility 6+ IDIS Cameras Origin Made in Korea Genuine IDIS Accessory Australian Stock Local Tech Support Why Use the Genuine IDIS Junction Box A junction box is small in price, but it's the part of the install your client sees up close — the seam between the wall and the camera. The DA-JB2500 is engineered to mate perfectly with the IDIS Lite Series housing diameter, the same screw pattern, the same gasket recess. No third-party adapter rings, no oversized footprint, no awkward cable bulges. It also keeps the IDIS Ultimate Warranty fully intact on the camera above it. Hidden Cable Termination The PoE / Cat6 joint is fully enclosed inside the junction box — no exposed RJ45, no UV-aged cable jacket, no tampering risk at the wall-to-camera interface. ADC12 Die-Cast Aluminium High-grade corrosion-resistant aluminium alloy stands up to coastal salt-spray, outback heat and CBD dust over a multi-year service life. Perfect Camera Mating Diameter, screw pattern and gasket recess are matched 1:1 to the supported IDIS cameras — clean seam, no light gaps, no rattles. Powder-Coated White Matches IDIS camera body colour for a discreet, professional install on rendered walls, painted soffits or concrete eaves. Generous Internal Volume 58 mm internal depth provides plenty of room to coil excess Cat6 service loop and route audio/alarm tails without strain on the cable bend radius. Warranty Preserved Specifying a genuine IDIS junction box keeps your camera fully covered under the IDIS Ultimate Warranty — third-party boxes can void support. Compatible IDIS Cameras The DA-JB2500 is the official junction box for the following IDIS cameras: DC-D2511WER & DC-D2511WER-V2 5MP IR Dome Camera · 2.8 mm fixed lens · IDIS Lite Series · NDAA & TAA compliant. DC-D2531WER & DC-D2531WER-V2 5MP Motorised Varifocal IR Turret · 2.7-13.5 mm · audio & alarm I/O. DC-D2531WR & DC-D2531WR-V2 5MP Motorised Varifocal IR Vandal Dome · IR-pass black bubble · 4 × IR LEDs. DC-T2531WR & DC-T2531WR-V2 5MP Motorised Varifocal IR Bullet · long-range outdoor surveillance. DC-D2234WR 2MP motorised varifocal IR dome — full DirectIP support. TC-D4232WR HD analog 2MP motorised varifocal IR dome (DirectCX® range). Not sure if the DA-JB2500 fits your camera? Contact our Australian IDIS team and we'll confirm before you order — we stock the full IDIS mount and junction box range (DA-WM2500 wall mount, DA-JB2500 junction box, DA-BH1100 bracket, DA-FM2100 flush mount and more). Technical Specifications SKU DA-JB2500 Accessory Type Camera Junction Box Material ADC12 Die-Cast Aluminium Colour White (Powder-Coated) Dimensions 135.0(L) × 133.0(W) × 58.0(H) mm Weight 0.595 kg (1.31 lb) Compatible Cameras DC-D2234WR · DC-D2511WER (+V2) · DC-D2531WER (+V2) · DC-D2531WR (+V2) · DC-T2531WR (+V2) · TC-D4232WR Installation Surface Wall · ceiling · soffit · eave (suitable indoor & outdoor) Function Cable joint enclosure · service loop housing · weather seal at camera base Origin Made in Korea Warranty IDIS Ultimate Warranty (Australia) Frequently Asked Questions Do I really need a junction box?Strongly recommended for any exposed outdoor install. The junction box hides the RJ45 termination, protects the cable joint from UV/water, gives a clean install finish and adds tamper resistance. Will the DA-JB2500 fit my IDIS camera?Yes for the IDIS Lite Series 2-Series domes, turrets and bullets — see the full compatibility list above. What's it made of?ADC12 die-cast aluminium with a powder-coated white finish — corrosion-resistant and rated for Australian coastal and inland environments. Can I pair it with a wall mount?Yes — the DA-JB2500 can be combined with the DA-WM2500 wall mount for a complete clean install, or used directly against the wall on its own. Why not use a generic plastic junction box?Generic boxes don't match the IDIS housing diameter or screw pattern, leave visible gaps, and can void the IDIS Ultimate Warranty. The DA-JB2500 keeps everything aligned and supported. Do you ship Australia-wide?Yes — fast dispatch from Australian stock. Project pricing available for multi-unit orders alongside camera and NVR bundles. Order the IDIS DA-JB2500 from CCTV Guru CCTV Guru is an authorised Australian distributor of IDIS surveillance products and accessories. Order the DA-JB2500 alongside your IDIS Lite Series cameras for a clean, warranty-preserving install. For multi-camera rollouts or government tenders, contact our Australian team for project pricing and bulk stock availability.

  Read more less

   

  $39.00

• 

  VIVOTEK VIVOTEK AM-612 NVR Rack Mount Rails — SPCC Steel Pair, 25kg Load for ND9441/ND9541

   

  VIVOTEK · Rack Mount Rails VIVOTEK Rack Mount Rails VIVOTEK AM-612 NVR Rack Mount Rails — SPCC Steel Pair, 25kg Load for ND9441/ND9541 AM-612 Rack Mount Rails — Australian Stock & 3-Year Warranty The VIVOTEK AM-612 is a pair of SPCC metal, zinc-plated rack mount rails that secure compatible VIVOTEK NVRs into a standard 19" server rack. Each rail supports an adjustable mounting depth of 700–900 mm and a maximum load of 25 kg, giving a solid, serviceable rack install for the ND9441, ND9541 and P/2 variants. Technical Specifications Rack Mount Rails Specifications Type NVR rack mount rails (pair) Material SPCC metal, zinc plated Maximum Load 25 kg Mounting Depth Range 700–900 mm Rack Compatibility Standard 19" server rack Compatible NVRs ND9441, ND9541, ND9441P, ND9541P (and P/2 variants) Weight 2 kg (pair) Warranty 3-Year Australian Warranty Frequently Asked Questions Which NVRs does the AM-612 fit?The rails are designed for VIVOTEK ND9441, ND9541, ND9441P and ND9541P, including their P/2 variants. What rack size does it suit?It mounts into any standard 19" server rack. What load and depth do the rails support?Each pair carries up to 25 kg with an adjustable mounting depth range of 700–900 mm. What warranty is included?Every AM-612 comes with a 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $169.00

• 

  VIVOTEK VIVOTEK AM-528 Mounting Adapter — 1-1/2" NPT for Fixed Dome Cameras

   

  VIVOTEK · Mount Adapter VIVOTEK Mount Adapter VIVOTEK AM-528 Mounting Adapter — 1-1/2" NPT for Fixed Dome Cameras AM-528 mount adapter — Australian Stock & 3-Year Warranty The VIVOTEK AM-528 is a rugged aluminium alloy mounting adapter that connects VIVOTEK indoor and outdoor fixed dome cameras to pendant pipes (AM-116/AM-117), gooseneck mounts (AM-221) and wall brackets (AM-218). It provides a 3/4" NPT female and 1-1/2" NPT male pipe thread for a versatile, secure connection. Finished in white, it delivers corrosion-resistant durability across a wide range of installs. Technical Specifications Mount Adapter Specifications Type Mounting Adapter (Fixed Dome) Material Aluminium Alloy Colour White Pipe Thread 3/4" NPT Female & 1-1/2" NPT Male Connector Compatible Mounts Pendant Pipe (AM-116/AM-117), Gooseneck (AM-221), Wall Bracket (AM-218) Warranty 3-Year Australian Warranty Frequently Asked Questions What does the AM-528 adapt?It connects VIVOTEK indoor and outdoor fixed dome cameras to pendant pipes, gooseneck mounts and wall brackets. What pipe thread does it use?A 3/4" NPT female connector plus a 1-1/2" NPT male connector. Which mounts is it compatible with?Pendant pipes AM-116/AM-117, gooseneck AM-221 and wall bracket AM-218. What warranty does it include?Every unit is backed by our 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $139.00

• 

  AXIS AXIS T91G61 (5506-951) — Wall Mount for PTZ & Multi-Sensor Cameras

   

  Genuine AXIS · Wall Mount · IP66 / IK10 RatedAXIS T91G61Professional Wall Mounting for PTZ & Multi-Sensor Cameras The AXIS T91G61 Wall Mount (5506-951) is a professional-grade mounting solution designed for Axis PTZ and multi-sensor network cameras. A spacious internal compartment safely houses connectivity devices, midspans and service loops, protecting them from water ingress and environmental damage. With its pre-mounted Ethernet cable and IP66-rated connector, it simplifies and speeds up installation. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Internal Accessory Compartment — Ample room to safely house midspans, media converters and cable loops inside the mount. Pre-Mounted IP66 RJ45 Connector — Includes a high-quality Ethernet cable with a waterproof gasketed connector for fast, reliable power and data hookups. Elite Durability — Powder-coated aluminium with IK10 impact resistance and IP66 / NEMA 4X weather ratings for harsh outdoor use. Retrofit Friendly — Standardised hole pattern matches both Axis and Pelco PTZ mounts, allowing easy upgrades without new drilling. Specifications Model 5506-951 (White) Category Wall Mount Max Load 30 kg (66 lb) Material Powder-coated Aluminium Ratings IP66, NEMA 4X, IK10 Dimensions 185 x 214 x 404 mm Weight 3.5 kg (7.7 lb) Compatible With AXIS Q60, Q61, Q63, P56, Q37, Q38 and M55 Series cameras Warranty 3 Years (AU) Download AXIS T91G61 Datasheet (PDF) Frequently Asked Questions Which cameras is the T91G61 recommended for?It is recommended for the AXIS Q60, Q61 and Q63 Series PTZ cameras, P56 Series PTZ cameras, Q37 and Q38 Series panoramic cameras, and M55 Series PTZ cameras. How much weight can the T91G61 support?The mount supports a maximum load of 30 kg (66 lb), suitable for large PTZ and multi-sensor camera units. Is the T91G61 suitable for harsh outdoor environments?Yes. It is built from powder-coated aluminium with IK10 impact resistance and IP66 / NEMA 4X weather ratings for demanding outdoor installations. Can the T91G61 be pole or corner mounted?Yes. It can mount directly to walls or be combined with optional accessories for pole (AXIS T91B57) or corner (AXIS T91A64) installations.

  Read more less

   

  $409.00

• 

  UNV UNV TR-CM24-IN — Indoor Pendant Mount for Fixed Dome Cameras

   

  Genuine UNV · Pendant Mount · IPC323X SeriesUNV TR-CM24-INStable Overhead Mounting for Indoor Dome Cameras The UNV TR-CM24-IN is a professional-grade indoor pendant mount engineered specifically for the Uniview IPC323X Series fixed dome cameras. Built from high-quality aluminium alloy with a 3/4" NPS thread, it delivers a stable, secure overhead mounting solution that blends neatly into modern commercial and residential spaces. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Dedicated Compatibility — expertly designed for seamless integration with the Uniview IPC323X Series fixed dome cameras. Durable Construction — built from robust aluminium alloy for long-term stability and reliability indoors. Lightweight Design — at just 0.25 kg, it offers a sturdy yet manageable pendant solution. Standardised Threading — a 3/4" NPS thread fits standard mounting poles and accessories. Specifications Model TR-CM24-IN Category Pendant Mount Material Aluminium alloy Dimensions 110.0 mm x 223.5 mm Weight 0.25 kg (0.55 lb) Thread 3/4" NPS Mounting Indoor pendant mount Compatible With Uniview IPC323X Series fixed dome cameras Warranty 3 Years (AU) Download TR-CM24-IN Datasheet (PDF) Frequently Asked Questions Which cameras is this mount designed for?It is engineered specifically for the Uniview IPC323X Series fixed dome cameras. What thread does it use?It features a 3/4" NPS thread for compatibility with standard mounting poles and accessories. Is it suitable for outdoor use?This is an indoor pendant mount, ideal for commercial and residential ceilings. What accessories pair with it?It is compatible with the TR-SE24-IN and TR-SE24-A-IN pendant mounting poles and the TR-JB08 junction box.

  Read more less

   

  $20.00

• 

  ZKTeco ZKTeco VE01-A50L — Angle Bracket for Outdoor Intercom

   

  Genuine ZKTeco · Angle Bracket · Optimised ViewingZKTeco VE01-A50L BracketPerfect Visitor Framing for Corner & Side-Wall Installs The ZKTeco VE01-A50L Angle Bracket is a dedicated mounting accessory designed for the ZKTeco VE01-A50L 4-Wire Villa Outdoor Station. Essential where the outdoor station cannot be mounted directly facing the visitor, such as side walls, narrow gate posts or corners, it provides a fixed angular offset so the intercom's 2MP camera captures a clear, centred view of every visitor. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Optimised Viewing Angle — Adjusts the orientation of the outdoor station for better coverage of the entry path, improving security and visitor identification. Perfect Compatibility — Custom-engineered specifically for the VE01-A50L outdoor station for a flush, secure fit. Weather-Resistant Build — Constructed from durable, outdoor-grade materials designed to withstand harsh conditions without corroding or degrading. Simplified Installation — Includes pre-drilled holes and mounting hardware for a quick setup on flat or uneven surfaces. Specifications Category Mount Bracket Material Durable, weather-resistant construction Installation Type Surface Wall / Corner Mount Application Outdoor Intercom Angle Adjustment Compatible With ZKTeco VE01-A50L (4-Wire Analog) Warranty 3 Years (AU) Frequently Asked Questions Which device is this bracket compatible with?It is custom-engineered for the ZKTeco VE01-A50L 4-Wire Villa Outdoor Station. When should I use this angle bracket?Use it wherever the outdoor station cannot be mounted directly facing the visitor, such as side walls, narrow gate posts or corners, so the 2MP camera still captures a centred view. Does the bracket include mounting hardware?Yes. It includes pre-drilled holes and the necessary screws for a quick setup on flat or uneven surfaces. Note: this product includes the bracket and screws only. Is the outdoor station included?No. The VE01-A50L Outdoor Station is sold separately or as part of the VK07-A50L Intercom Kit.

  Read more less

   

  $2.00

• 

  VIVOTEK VIVOTEK AM-525 Mounting Adapter — 1-1/2" NPT for Outdoor Dome Cameras

   

  VIVOTEK · Mount Adapter VIVOTEK Mount Adapter VIVOTEK AM-525 Mounting Adapter — 1-1/2" NPT for Outdoor Dome Cameras AM-525 mount adapter — Australian Stock & 3-Year Warranty The VIVOTEK AM-525 is a rugged aluminium alloy mounting adapter that connects VIVOTEK outdoor fixed dome and fisheye cameras to pendant pipes as well as wall, pole and corner brackets. It provides a 3/4" NPT female and 1-1/2" NPT male pipe thread for a versatile, weather-ready connection. Finished in white, it delivers corrosion-resistant durability for demanding outdoor installs. Technical Specifications Mount Adapter Specifications Type Mounting Adapter (Outdoor Dome / Fisheye) Material Aluminium Alloy Colour White Pipe Thread 3/4" NPT Female & 1-1/2" NPT Male Connector Warranty 3-Year Australian Warranty Frequently Asked Questions What does the AM-525 adapt?It adapts VIVOTEK outdoor fixed dome and fisheye cameras to pendant pipes and wall, pole or corner brackets. What pipe thread does it use?A 3/4" NPT female connector plus a 1-1/2" NPT male connector. What is it made from?Rugged aluminium alloy for strength and corrosion resistance. What warranty does it include?Every unit is backed by our 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $129.00

• 

  Dahua Dahua DH-PFB5310C — In-Ceiling Mount Bracket

  1 review

   

  Genuine Dahua · In-Ceiling Mount · Anti-Drop RopeDahua PFB5310CA Discreet, Recessed Mount for a Clean Ceiling Finish The Dahua PFB5310C is a reliable in-ceiling mount bracket that delivers a clean, secure recessed install for compatible network and PTZ cameras, with minimal intrusion into the camera's field of view. Built from durable SECC and polycarbonate with an anti-drop safety rope, it keeps installations safe even in busy commercial spaces. Quick to fit and easy to maintain, it suits offices, retail, warehouses and schools. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Recessed in-ceiling design — sits flush for a clean finish with full visual range for the camera. Anti-drop safety rope — included for secure, worry-free installation in commercial environments. SECC & polycarbonate build — rugged construction for long-lasting, reliable performance. 3.0 kg load capacity — supports compatible Dahua network and PTZ cameras. Specifications Model DH-PFB5310C Category Ceiling Mount Material SECC & PC (Polycarbonate) Colour White Load Capacity 3.0 kg (6.61 lb) Dimensions Ø 238.0 mm × 78.0 mm Net Weight 0.35 kg Operating Temperature -40 °C to +60 °C Mounting In-ceiling (recessed) Warranty 3 Years (AU) Frequently Asked Questions Which cameras is the PFB5310C compatible with?It is designed for compatible Dahua network and PTZ cameras suited to recessed ceiling mounting — check your camera's mounting spec to confirm it lists the PFB5310C. What ceiling types does it suit?It works with standard recessed ceiling types, sitting flush for a discreet, professional finish. Is this a genuine Dahua accessory?Yes — the PFB5310C is an official Dahua in-ceiling mount bracket built to fit Dahua camera housings. Is it easy to maintain after installation?Yes. The bracket allows easy disassembly for maintenance, and the included anti-drop rope keeps the camera secure during servicing.

  Read more less

   

  $49.00

• 

  UNV UNV TR-JB07/WM03-F-IN — Outdoor Wall Mount Bracket for Fixed Dome Cameras

   

  Genuine UNV · Wall Mount · Powder-Coated FinishUNV TR-JB07/WM03-F-INProfessional Outdoor Mounting for Fixed Dome Cameras The UNV TR-JB07/WM03-F-IN is a professional-grade outdoor wall mount bracket for securely mounting Uniview fixed dome cameras. Made from durable aluminium alloy with a powder-coated finish, it withstands harsh outdoor conditions while keeping camera wiring concealed and protected through internal cable routing. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Durable Construction — aluminium alloy with a powder-coated finish for long-lasting outdoor performance. Weatherproof Housing — outdoor-rated to withstand harsh conditions over the long term. Internal Cable Management — routes wiring internally for neat, secure and concealed installs. Fast Installation — pre-drilled mounting holes and included hardware speed up setup. Specifications Model TR-JB07/WM03-F-IN Category Wall Mount Material Aluminium alloy Finish Powder-coated Cable Management Internal routing for concealed wiring Weather Resistance Outdoor rated Mounting Pre-drilled wall mount Compatible With Uniview fixed dome cameras (model-specific) Warranty 3 Years (AU) Frequently Asked Questions What is this bracket made from?It is constructed from durable aluminium alloy with a powder-coated finish for outdoor durability. Is it suitable for outdoor use?Yes. The weatherproof housing is outdoor rated for long-lasting performance in harsh conditions. What's included in the box?The bracket, mounting hardware and a user guide are included. What else do I need to install it?You'll need a compatible Uniview fixed dome camera, an RJ45 Cat6 cable if the camera uses PoE, and wall fasteners appropriate for your surface.

  Read more less

   

  $25.00

• 

  UNV UNV TR-JB03-H-IN — Camera Junction Box Bracket

   

  Genuine UNV · Junction Box · White or BlackUNV TR-JB03-H-INA Professional Junction Box for Dome & Bullet Cameras The Uniview UNV Junction Box Bracket delivers a professional, secure mounting solution for Uniview dome and bullet cameras. Available in white and black to match your camera finish, it protects and hides cables for a clean, coordinated look. Built from durable aluminium alloy, it features an internal junction cavity with rear and side cable entries. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Colour Match — choose white or black to blend seamlessly with your camera finish. Aluminium Alloy — durable construction with a weather-resistant powder-coated finish. Concealed Wiring — an internal cavity with rear and side entries keeps cables out of sight. Fast Installs — a pre-drilled mounting pattern makes for quick, secure fitting. Specifications Model TR-JB03-H-IN Category Junction Box Colour Options White / Black Material Aluminium alloy Finish Weather-resistant powder coating Cable Routing Internal cavity; rear & side entries Environment Indoor / sheltered outdoor Compatible With Uniview UNV dome & bullet bases (check specific model) Warranty 3 Years (AU) Frequently Asked Questions Which cameras is this bracket compatible with?It suits Uniview UNV dome and bullet camera bases. Check your specific camera model for fitment. What colours are available?It comes in white or black so you can match it to your camera finish. Can it be used outdoors?Yes, its weather-resistant powder-coated finish suits indoor or sheltered outdoor installations. What is included?The junction box bracket, mounting hardware and a quick guide.

  Read more less

   

  $15.00 - $19.00

• 

  UNV UNV TR-JB07/WM03-G-IN — Outdoor Wall Mount with Junction Box for Fixed Dome Cameras

   

  Genuine UNV · Wall Mount · Built-in Junction BoxUNV TR-JB07/WM03-G-INClean, Protected Wall Mounting for Your Dome Cameras The UNV TR-JB07/WM03-G-IN is a rugged outdoor wall mount bracket with a built-in junction box, purpose-made for Uniview IPC36XXL, IPCD1XX and IPCT1XX fixed dome and turret cameras. Machined from durable aluminium alloy with an extra back outlet for clean cable routing, it combines a polished appearance with reliable protection for professional installs. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Dual-Function Design — combines a solid wall mount with an integrated junction box for streamlined installation. Clean Cable Routing — an extra back outlet hides and protects wiring for a tidy, professional finish. Weather & Wear Resistant — robust aluminium alloy construction ensures longevity in outdoor environments. Purpose-Built Fit — optimised for Uniview IPC36XXL, IPCD1XX and IPCT1XX fixed dome and turret cameras. Specifications Model TR-JB07/WM03-G-IN Category Wall Mount Material Aluminium alloy Dimensions 126.7 × 126.4 × 228.4 mm Weight ~1 kg (2.20 lb) Cable Management Integrated junction box with extra back outlet Mounting Outdoor wall mount Compatible With IPC36XXL, IPCD1XX & IPCT1XX fixed dome/turret cameras Warranty 3 Years (AU) Frequently Asked Questions Which cameras is this bracket designed for?It is purpose-built for Uniview IPC36XXL, IPCD1XX and IPCT1XX fixed dome and turret cameras. Does it include a junction box?Yes. An integrated junction box with an extra back outlet provides clean cable routing and protection. Is it suitable for outdoor use?Yes. Its durable aluminium alloy construction is engineered to withstand outdoor environments. What are its dimensions and weight?It measures 126.7 × 126.4 × 228.4 mm and weighs approximately 1 kg (2.20 lb).

  Read more less

   

  $51.00

• 

  UNV UNV TR-JB03-G-IN — Junction Box for Fixed Dome Cameras

   

  Genuine UNV · Junction Box · Aluminium BuildUNV TR-JB03-G-INA Robust Junction Box for UNV Dome Cameras The Uniview UNV TR-JB03-G-IN Junction Box is a robust aluminium junction box tailored for IPC32X, IPC31X and IPCD1XX series fixed dome cameras. Designed for sleek, safe wall mounting, it offers clean cable routing from both the back and side for a tidy, durable installation. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support Why You'll Love It Tailored Fit — engineered to perfectly suit Uniview IPC32X, IPC31X and IPCD1XX dome cameras. Compact & Lightweight — minimal bulk at just 0.2 kg and Ø108.6 x 36 mm. Effortless Cable Management — back and side cable entries keep wiring organised and secure. Weather-Ready — includes a waterproof gasket and 3/4'' conduit threading for added protection. Specifications Model TR-JB03-G-IN Category Junction Box Material Aluminium alloy Dimensions Ø108.6 x 36 mm (Ø4.28'' x 1.42'') Weight 0.2 kg (0.44 lb) Cable Routing Back and side entries Waterproofing Gasket included; conduit threading (3/4'' NPS) Compatible With IPC32X, IPC31X & IPCD1XX series fixed dome cameras Warranty 3 Years (AU) Frequently Asked Questions Which cameras is this junction box for?It is tailored for Uniview IPC32X, IPC31X and IPCD1XX series fixed dome cameras. Is it weatherproof?It includes a waterproof gasket and 3/4'' conduit threading for reliable use in varied installations. How big and heavy is it?It measures Ø108.6 x 36 mm and weighs just 0.2 kg, giving a compact, low-profile finish. Is this a genuine UNV part?Yes, it is a genuine Uniview accessory backed by our 3-year Australian warranty and local support.

  Read more less

   

  $15.00

• 

  HiLook HiLook HA-ALARM-BKT — Adjustable Wall/Ceiling Detector Bracket

   

  AX Hybrid Pro · Adjustable Detector Bracket · Wall & Ceiling Adjustable Bracket HiLook HA-ALARM-BKT Adjustable Detector Bracket — Australian Stock & 3-Year Warranty The HiLook HA-ALARM-BKT is an adjustable wall and ceiling mounting bracket for HiLook AX Hybrid Pro indoor PIR and dual-tech detectors. With 0–90° vertical and −40° to +40° horizontal adjustment, it lets you aim a detector precisely at the area you want to protect — covering doorways, corners and walkways that a fixed flush mount can't reach. Compact, lightweight and easy to install, it's the simple way to get the best coverage from your PIR1 or PIR2 detector. Backed by genuine Australian stock and a 3-year warranty. Specifications Model / SKU HA-ALARM-BKT Type Adjustable detector mounting bracket Vertical Adjustment 0–90° Horizontal Adjustment −40° to +40° Mounting Wall or ceiling Compatibility HiLook AX Hybrid Pro indoor PIR / dual-tech detectors (e.g. HA-ALARM-PIR1, HA-ALARM-PIR2) Material PC Warranty 3-Year Australian Warranty Frequently Asked Questions How far does the bracket adjust?0–90° vertically and −40° to +40° horizontally, so you can aim the detector exactly where you need coverage. Can it mount on a ceiling?Yes. It's designed for both wall and ceiling installation. Which detectors does it fit?HiLook AX Hybrid Pro indoor PIR and dual-tech detectors, including the HA-ALARM-PIR1 and HA-ALARM-PIR2. Why use an adjustable bracket?It lets you angle the detector toward doorways, corners or walkways for better coverage than a fixed flush mount. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $6.70

• 

  VIVOTEK VIVOTEK AM-719_V01 Outdoor Junction Box — Aluminium Alloy, IP66, PF 3/4"

   

  VIVOTEK · Outdoor Junction Box VIVOTEK Outdoor Junction Box VIVOTEK AM-719_V01 Outdoor Junction Box — Aluminium Alloy, IP66, PF 3/4" AM-719_V01 Outdoor Junction Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-719_V01 is an aluminium alloy outdoor junction box that provides weatherproof cable entry and termination behind VIVOTEK bullet and dome cameras. Finished in white with an IP66 rating and a PF 3/4" pipe thread, it measures 122 x 122 x 63 mm and pairs with the AM-218 wall bracket for a tidy, protected install. Technical Specifications Junction Box Specifications Type Outdoor junction box Material Aluminium alloy Colour White Pipe Thread PF 3/4" Weather Rating IP66 (with supported cameras) Dimensions 122 (L) x 122 (W) x 63 (H) mm Weight 0.55 kg Warranty 3-Year Australian Warranty Frequently Asked Questions What is the AM-719_V01 used for?It provides weatherproof cable entry and termination behind VIVOTEK bullet and dome cameras, keeping connections neat and protected. Is it weatherproof?Yes. The box carries an IP66 rating when used with supported cameras, protecting against dust and heavy rain outdoors. What thread does it use?It uses a PF 3/4" pipe thread and pairs with the AM-218 wall bracket. What warranty is included?Every AM-719_V01 comes with a 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $49.00

• 

  VIVOTEK VIVOTEK AM-529 Mounting Adapter — Aluminium Alloy for Speed Dome Cameras

   

  VIVOTEK · Mount Adapter VIVOTEK Mount Adapter VIVOTEK AM-529 Mounting Adapter — Aluminium Alloy for Speed Dome Cameras AM-529 mount adapter — Australian Stock & 3-Year Warranty The VIVOTEK AM-529 is a robust aluminium alloy mounting adapter that connects a VIVOTEK speed dome camera to pendant pipes or wall brackets. It features a 3/4" NPT female and 1-1/2" PS male pipe thread, measures Ø154 x 72 mm and weighs 460 g. Finished in white, it delivers a secure, corrosion-resistant connection for demanding PTZ installs. Technical Specifications Mount Adapter Specifications Type Mounting Adapter (Speed Dome) Material Aluminium Alloy Colour White Pipe Thread 3/4" NPT Female & 1-1/2" PS Male Dimensions Ø154 x 72 mm Weight 460 g Warranty 3-Year Australian Warranty Frequently Asked Questions What does the AM-529 connect?It connects a VIVOTEK speed dome camera to pendant pipes or wall brackets. What pipe thread does it use?A 3/4" NPT female connector plus a 1-1/2" PS male connector. What is it made from?Rugged aluminium alloy for strength and corrosion resistance. What warranty does it include?Every unit is backed by our 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $119.00

• 

  VIVOTEK VIVOTEK AM-520_V05 Mounting Adapter — Aluminium Alloy for Fixed Dome Cameras

   

  VIVOTEK · Mount Adapter VIVOTEK Mount Adapter VIVOTEK AM-520_V05 Mounting Adapter — Aluminium Alloy for Fixed Dome Cameras AM-520_V05 mount adapter — Australian Stock & 3-Year Warranty The VIVOTEK AM-520_V05 is a durable aluminium alloy mounting adapter that lets you fit a VIVOTEK fixed dome camera onto a wall bracket or pendant setup. Finished in clean white to match VIVOTEK housings, it measures Ø180 x 52 mm and weighs 841 g. A rugged, corrosion-resistant accessory that keeps your dome camera securely mounted for years. Technical Specifications Mount Adapter Specifications Type Mounting Adapter (Fixed Dome) Material Aluminium Alloy Colour White Dimensions Ø180 x 52 mm Weight 841 g Warranty 3-Year Australian Warranty Frequently Asked Questions What does the AM-520_V05 adapt?It adapts a VIVOTEK fixed dome camera onto a wall bracket or pendant mounting setup. What is it made from?Rugged aluminium alloy for strength and corrosion resistance. What colour is it?White, to match standard VIVOTEK camera housings. What warranty does it include?Every unit is backed by our 3-Year Australian Warranty. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $133.00

• 

  VIVOTEK VIVOTEK AM-218_V02 Wall Mount Bracket — Aluminium Alloy for Dome & Multi-Sensor Cameras

   

  VIVOTEK · Wall Mount VIVOTEK Wall Mount VIVOTEK AM-218_V02 Wall Mount Bracket — Aluminium Alloy for Dome & Multi-Sensor Cameras AM-218_V02 Wall Mount Bracket — Australian Stock & 3-Year Warranty The VIVOTEK AM-218_V02 is a modular wall mount bracket built from durable aluminium alloy in a white finish, designed to carry VIVOTEK dome, fixed-dome and multi-sensor cameras off a wall. Its NPT 1-1/2" pipe thread pairs cleanly with VIVOTEK adapters such as the AM-52E, AM-525 and AM-528, and it works alongside the AM-719 junction box for tidy cable management. Measuring 231 (L) x 117 (W) x 117 (H) mm and weighing 0.7 kg, it stays solid under load while keeping a slim profile, and it can be combined with the AM-312 pole adapter for pole installs. Supplied with Australian stock and backed by our local 3-year warranty. Technical Specifications Wall Mount Bracket Specifications Type Wall Mount Bracket Material Aluminium Alloy Colour White Pipe Thread NPT 1-1/2" Dimensions 231 (L) x 117 (W) x 117 (H) mm Weight 0.7 kg Warranty 3-Year Australian Warranty Frequently Asked Questions What cameras does the AM-218_V02 mount?It is a modular wall mount for VIVOTEK dome, fixed-dome and multi-sensor cameras, holding them off a wall for the coverage angle you need. What pipe thread does it use?It uses an NPT 1-1/2" thread that pairs with VIVOTEK adapters such as the AM-52E, AM-525 and AM-528. Can it be used on a pole?Yes. Combine it with the AM-312 pole adapter for pole installs, and pair with the AM-719 junction box for neat cabling. Is it covered by warranty in Australia?Yes. It ships from Australian stock and is backed by a 3-Year Australian Warranty with local tech support. 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $94.00

• 

  VIVOTEK VIVOTEK AM-71G_V01 — IP66/IP67 Outdoor Conduit Box for Dome & Bullet Cameras

   

  VIVOTEK · Waterproof Conduit Box · IP66 VIVOTEK Waterproof Conduit Box VIVOTEK AM-71G_V01 — IP66/IP67 Outdoor Conduit Box for Dome & Bullet Cameras AM-71G_V01 IP66 Outdoor Conduit Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-71G_V01 is a heavy cast aluminium conduit box that gives an IP66/IP67 weatherproof cable termination behind the camera. It seals the cable entry and connectors away from rain, dust and coastal salt spray for reliable long-term outdoor performance. A PF 3/4" pipe thread lets it tie neatly into standard conduit runs. It is built for exposed outdoor and coastal sites where the join needs to stay dry. Technical Specifications Type Waterproof conduit box Material Aluminium Alloy Colour White Pipe Thread PF 3/4" Weatherproofing IP66 / IP67 Dimensions Ø172 × 54 mm Weight 1,155 g Compatibility VIVOTEK FD9167-HT-V2, FD9367-EHTV-V2, FD9365-EHTV-V2, FD9187-HT-V3, FD9387-EHTV-V3, FD9391-EHTV-V2 fixed domes and IB9367-EHT-V2, IB9365-EHTV-V2, IB9387-EHTV-V3, IB9391-EHTV-V2 bullets Warranty 3-Year Australian Warranty Frequently Asked Questions What is the AM-71G_V01?It is a cast aluminium alloy conduit box that provides a weatherproof cable and connector termination behind a VIVOTEK dome or bullet camera. What is its IP rating?It is rated IP66/IP67, sealing the cable join against heavy rain, dust and coastal salt spray for exposed outdoor installations. Which cameras is it compatible with?It suits VIVOTEK fixed domes including the FD9167-HT-V2, FD9367-EHTV-V2, FD9365-EHTV-V2, FD9187-HT-V3, FD9387-EHTV-V3 and FD9391-EHTV-V2, plus IB9367-EHT-V2, IB9365-EHTV-V2, IB9387-EHTV-V3 and IB9391-EHTV-V2 bullet cameras. What warranty does it come with?It is backed by a 3-Year Australian Warranty through CCTV Guru. Downloads AM-71G_V01 Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $115.00

• 

  VIVOTEK VIVOTEK AM-71E_V02 — Outdoor Aluminium Conduit Box for Bullet & Dome Cameras

   

  VIVOTEK · Outdoor Conduit Box · Aluminium VIVOTEK Outdoor Conduit Box VIVOTEK AM-71E_V02 — Outdoor Aluminium Conduit Box for Bullet & Dome Cameras AM-71E_V02 Outdoor Conduit Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-71E_V02 is an aluminium conduit box that routes and protects cabling behind bullet and dome cameras. It provides a PF 1/2" conduit entry for tidy, weather-resistant cable management on outdoor installations. The cast aluminium alloy body is corrosion-resistant and outdoor-rated to withstand exposure on walls, eaves and poles. It is designed for VIVOTEK bullet and dome cameras deployed across Australian sites. Technical Specifications Type Outdoor Conduit Box Material Aluminium Alloy Colour White Pipe Thread PF 1/2" Dimensions Ø117 × 40 mm Weight 373 g Compatibility VIVOTEK IB9360-H, IB9380-H, IB9369, FD9369 and IB9383-H(T)V cameras Warranty 3-Year Australian Warranty Frequently Asked Questions What is the VIVOTEK AM-71E_V02?It is an aluminium conduit box that mounts behind bullet and dome cameras to route and protect cabling and provide a PF 1/2" conduit entry for outdoor installations. Is the AM-71E weatherproof?Yes. It is made from corrosion-resistant, outdoor-rated cast aluminium alloy designed to protect cabling from the elements in exposed installations. VIVOTEK does not publish a numeric IP rating for this conduit box. Which cameras are compatible with the AM-71E_V02?The V02 revision fits VIVOTEK IB9360-H, IB9380-H, IB9369, FD9369 and IB9383-H(T)V cameras. What warranty does the AM-71E_V02 come with?It is backed by a 3-Year Australian Warranty when purchased from CCTV Guru. Downloads AM-71E_V02 Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $38.00

• 

  VIVOTEK VIVOTEK AM-71D_V01 — Outdoor Aluminium Conduit Box for Fixed Dome Cameras

   

  VIVOTEK · Outdoor Conduit Box · Aluminium VIVOTEK Outdoor Conduit Box VIVOTEK AM-71D_V01 — Outdoor Aluminium Conduit Box for Fixed Dome Cameras AM-71D_V01 Outdoor Conduit Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-71D_V01 is a compact, low-profile aluminium conduit box for fixed dome cameras. It houses cabling and connections neatly behind the camera and provides a weather-resistant PF 1/2" conduit entry for outdoor installs. The lightweight cast aluminium alloy construction is corrosion-resistant and outdoor-rated to shrug off the elements on walls and eaves. It is purpose-designed for VIVOTEK fixed dome cameras deployed across Australian sites. Technical Specifications Type Outdoor Conduit Box Material Aluminium Alloy Colour White Pipe Thread PF 1/2" Dimensions Ø117 × 40 mm Weight 240 g Compatibility VIVOTEK FD9360-H, FD9380-H, FD9383-HV, FD9380-HV-V2, FD9199-H and FD9189-H-V3 fixed dome cameras Warranty 3-Year Australian Warranty Frequently Asked Questions What is the VIVOTEK AM-71D_V01?It is a compact, low-profile aluminium conduit box that mounts behind fixed dome cameras to house cabling and provide a PF 1/2" conduit entry for outdoor installations. Is the AM-71D weatherproof?Yes. It is built from corrosion-resistant, outdoor-rated cast aluminium alloy designed to protect cabling from the elements in exposed installations. VIVOTEK does not publish a numeric IP rating for this conduit box. Which cameras are compatible with the AM-71D_V01?It fits VIVOTEK FD9360-H, FD9380-H, FD9383-HV, FD9380-HV-V2, FD9199-H and FD9189-H-V3 fixed dome cameras. What warranty does the AM-71D_V01 come with?It is backed by a 3-Year Australian Warranty when purchased from CCTV Guru. Downloads AM-71D_V01 Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $38.00

• 

  VIVOTEK VIVOTEK AM-71C — IP66 Waterproof Junction Box for Dome, Bullet & Turret Cameras

   

  VIVOTEK · Waterproof Junction Box · IP66 VIVOTEK Waterproof Junction Box VIVOTEK AM-71C — IP66 Waterproof Junction Box for Dome, Bullet & Turret Cameras AM-71C IP66 Waterproof Junction Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-71C is a square aluminium junction box that protects power and network terminations behind your camera. It adds an IP66 weatherproof seal to keep dust and driving rain out of the cable connections. The generous internal volume makes for tidy cable management on exposed outdoor sites, with a PF 3/4" pipe thread for conduit entry. Finished in white cast aluminium alloy, the AM-71C suits VIVOTEK dome, bullet and turret cameras installed across Australian conditions. Technical Specifications Type Waterproof Junction Box Material Aluminium Alloy Colour White Pipe Thread PF 3/4" Weatherproofing IP66 (with supported cameras) Dimensions 122 (L) × 122 (W) × 76 (H) mm Weight 760 g Compatibility VIVOTEK FD9360/FD9380/FD9383 domes, IB9360/IB9368/IB9380/IB9388/IB9389/IB9383/IB9399/IB9369 bullets and IT9360/IT9380 turrets Warranty 3-Year Australian Warranty Frequently Asked Questions What is the VIVOTEK AM-71C?It is a square cast aluminium waterproof junction box that mounts behind the camera to protect power and network terminations and provide tidy cable management with a PF 3/4" conduit entry. What is the weatherproofing rating of the AM-71C?It provides an IP66 rating with supported cameras, sealing the cable connections against dust and heavy rain for outdoor installations. Which cameras are compatible with the AM-71C?It fits VIVOTEK FD9360, FD9380 and FD9383 domes, IB9360, IB9368, IB9380, IB9388, IB9389, IB9383, IB9399 and IB9369 bullets, and IT9360 and IT9380 turrets. What warranty does the AM-71C come with?It is backed by a 3-Year Australian Warranty when purchased from CCTV Guru. Downloads AM-71C Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $71.00

• 

  VIVOTEK VIVOTEK AM-71B-V02 — IP66/IP67 Waterproof Conduit Box for Fixed Dome & Bullet Cameras

   

  VIVOTEK · Waterproof Conduit Box · IP66 VIVOTEK Waterproof Conduit Box VIVOTEK AM-71B-V02 — IP66/IP67 Waterproof Conduit Box for Fixed Dome & Bullet Cameras AM-71B-V02 IP66 Waterproof Conduit Box — Australian Stock & 3-Year Warranty The VIVOTEK AM-71B-V02 is a rugged cast aluminium conduit box that houses cabling and connections directly behind your camera. It provides an IP66 weatherproof gland (IP67 when paired with the FD9389 series) to keep moisture and dust out at the cable entry. Finished in white cast aluminium alloy with a PF 3/4" pipe thread, it suits exposed outdoor installations on walls, eaves and poles. The AM-71B-V02 is an ideal mounting accessory for VIVOTEK fixed dome, turret and bullet cameras deployed in harsh Australian conditions. Technical Specifications Type Waterproof Conduit Box Material Aluminium Alloy Colour White Pipe Thread PF 3/4" Weatherproofing IP66 (with supported cameras); IP67 with FD9389 series Dimensions Ø138 × 55 mm Weight 736 g Compatibility VIVOTEK FD9189/FD9360/FD9368/FD9380/FD9388/FD9389/FD9383/FD9199 fixed domes and IT9388-HT / IT9389-H-V2 / IT9383 turret & bullet cameras Warranty 3-Year Australian Warranty Frequently Asked Questions What is the VIVOTEK AM-71B-V02?It is a cast aluminium waterproof conduit box that mounts behind the camera to house cabling and connections and provide a weatherproof cable gland with a PF 3/4" conduit entry. What is the weatherproofing rating of the AM-71B-V02?It delivers an IP66 rating with supported cameras, rising to IP67 when paired with the FD9389 series, making it suitable for exposed outdoor installations. Which cameras are compatible with the AM-71B-V02?It fits VIVOTEK FD9189, FD9360, FD9368, FD9380, FD9388, FD9389, FD9383 and FD9199 fixed domes plus IT9388-HT, IT9389-H-V2 and IT9383 turret and bullet cameras. What warranty does the AM-71B-V02 come with?It is backed by a 3-Year Australian Warranty when purchased from CCTV Guru. Downloads AM-71B-V02 Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $77.00

• 

  VIVOTEK VIVOTEK AM-21O_V01 — L-Shape Wall Mount Bracket for Fixed Dome & Fisheye Cameras

   

  VIVOTEK · L-Shape Wall Mount · Aluminium Alloy VIVOTEK L-Shape Bracket VIVOTEK AM-21O_V01 — L-Shape Wall Mount Bracket for Fixed Dome & Fisheye Cameras AM-21O_V01 L-Shape Wall Mount — Australian Stock & 3-Year Warranty The VIVOTEK AM-21O_V01 is a sturdy aluminium alloy L-shape wall mount that projects a fixed dome or fisheye camera out from a wall for wide downward coverage. Its right-angle design lifts the camera clear of the wall surface so the lens can look down and along a facade or corridor. Cabling routes internally through the bracket for a clean, tamper-resistant finish. Rated for outdoor use, it pairs with a broad range of VIVOTEK fixed dome and fisheye models. Technical Specifications Type L-shape wall mount bracket Material Aluminium Alloy Colour White Dimensions 206 (L) × 182 (W) × 110 (H) mm Weight 962 g Compatibility VIVOTEK FD9167-HT-V2, FD9367-EHTV-V2, FD9365-EHTV-V2, FD9187-HT-V3, FD9387-EHTV-V3, FD9391-EHTV-V2 fixed domes and FE9380-HV, FE9382-EHV-V2, FE9391-EHV-V2 fisheye cameras Warranty 3-Year Australian Warranty Frequently Asked Questions What is the AM-21O_V01?It is a VIVOTEK aluminium alloy L-shape wall mount bracket that holds a fixed dome or fisheye camera off a wall for wide downward coverage, with internal cable routing. Which cameras is it compatible with?It fits VIVOTEK fixed domes including the FD9167-HT-V2, FD9367-EHTV-V2, FD9365-EHTV-V2, FD9187-HT-V3, FD9387-EHTV-V3 and FD9391-EHTV-V2, plus FE9380-HV, FE9382-EHV-V2 and FE9391-EHV-V2 fisheye cameras. Can it be used outdoors?Yes. The AM-21O_V01 is built for outdoor wall mounting when paired with a weather-rated VIVOTEK camera. What warranty does it come with?It is backed by a 3-Year Australian Warranty through CCTV Guru. Downloads AM-21O_V01 Datasheet VIVOTEK Mount Product Page 3-Year AU Warranty Fast AU-Wide Shipping AU Tech Support

  Read more less

   

  $139.00

Show more products