EdgeMAX Router — NDAA Compliant Ubiquiti EdgeRouter X SFP — 5-Port Gigabit Router with 1G SFP & 24V Passive PoE (ER-X-SFP) The Ubiquiti EdgeRouter X SFP (ER-X-SFP) is a compact, fanless advanced router that packs five Gigabit RJ45 ports plus a 1G SFP fibre port into a desktop-sized chassis. All six interfaces are configurable for switching, and the SFP port adds fibre connectivity for backhaul and carrier-class deployments. With 24V passive PoE in and out, an external power adapter, and centralised UNMS/EdgeMAX management, the ER-X-SFP is a versatile choice for homes, small offices, and ISP edge sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5x GbE + 1G SFP Power 24V Passive PoE Memory 256 MB RAM Compliance NDAA Why Choose the EdgeRouter X SFP? Six Configurable Gigabit Interfaces Five Gigabit RJ45 ports plus one 1G SFP fibre port — all six configurable for switching, so you can route, switch, and add fibre uplinks from a single compact unit. Fibre-Ready SFP Backhaul The 1G SFP port provides fibre connectivity to support backhaul applications for carrier-class and ISP edge networks where copper distances fall short. 24V Passive PoE In & Out Powered by 24V passive PoE or its included adapter, the ER-X-SFP can also pass 24V passive PoE out — up to 12W per port and 50W total — to power compatible Ubiquiti devices over the same Ethernet run. Centralised UNMS / EdgeMAX Management Managed by UNMS (Ubiquiti Network Management System), a single control plane manages registered EdgeMAX devices across multiple sites through an intuitive UI. Compact, Fanless & Wall-Mountable At just 142 x 75 x 23 mm and 215 g, the silent, fanless chassis tucks into cabinets, comms cupboards, or onto a wall with the built-in mount. NDAA Compliant Fully NDAA compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model EdgeRouter X SFP (ER-X-SFP) Networking Interfaces (5) GbE RJ45 ports • (1) 1G SFP port PoE Interface (5) 24V Passive PoE, 2-pair (Pins 4, 5+; 7, 8−) Total PoE Available 50 W Max PoE Wattage / Port 12 W System Memory 256 MB DDR3 RAM Code Storage 256 MB NAND Power Method 24V DC, 2.5A power adapter (included) Power Supply External AC/DC adapter Supported Voltage Range 9–26 V DC Max Power Consumption 5 W (excludes PoE output) ESD / EMP Protection Air/contact: ± 24 kV Mounting Wall mount Dimensions 142 x 75 x 23 mm (5.6 x 3 x 0.9″) Weight 215 g (7.6 oz) Operating Temperature −10 to 45°C (14 to 113°F) Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources ER-X-SFP Tech Specs Ubiquiti Installation Guide Best For Homes & Small Offices Advanced routing, firewalling, and VLANs in a compact, silent unit that fits any desk or cabinet. ISP & Edge Sites The 1G SFP port adds fibre backhaul for carrier-class deployments and remote edge networks. PoE Device Power Pass 24V passive PoE out to power compatible Ubiquiti radios, APs, and cameras over Ethernet. Multi-Site Networks Centralised UNMS management keeps EdgeMAX devices across multiple sites under one control plane. Ships with a 24V DC, 2.5A external power adapter — no separate PSU required. All six interfaces (5x RJ45 + 1x SFP) are configurable for routing or switching. 24V passive PoE out delivers up to 12W per port, 50W total, to compatible devices. Wall-mountable, fanless chassis for silent operation in living and work spaces. Frequently Asked Questions What's the difference between the EdgeRouter X and the X SFP? The ER-X-SFP adds a 1G SFP fibre port for backhaul connectivity on top of the five Gigabit RJ45 ports, making it ideal for fibre uplinks and ISP edge deployments. Does the ER-X-SFP support PoE? Yes. It accepts 24V passive PoE input and can pass 24V passive PoE out — up to 12W per port and 50W total — to power compatible Ubiquiti devices. Is a power adapter included? Yes. A 24V DC, 2.5A external AC/DC power adapter is included in the box. How is the EdgeRouter X SFP managed? It runs EdgeOS locally and can be centrally managed through UNMS (Ubiquiti Network Management System) across multiple sites. Is the ER-X-SFP NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the ER-X-SFP is NDAA compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX AC — NDAA Compliant Ubiquiti airMAX Lite AP GPS — 5GHz 17dBi Sector Access Point (LAP-GPS) The Ubiquiti airMAX Lite AP GPS (LAP-GPS) is a powerful, affordable 5 GHz sector access point built for cost-effective point-to-multipoint and WISP networks. With an integrated 17 dBi sector antenna, GPS synchronisation and Ubiquiti's airMAX AC technology, GPS-synced units deliver up to 450+ Mbps real TCP/IP throughput while minimising interference between co-located radios. A dedicated 2.4 GHz management radio keeps the link manageable even under heavy load. Ideal for ISPs, WISPs, and large-site backhaul anywhere in Australia, the LAP-GPS ships with genuine Ubiquiti stock and fast Australia-wide shipping. Throughput 450+ Mbps Antenna Gain 17 dBi Sector Sync GPS Synced Interface Gigabit Ethernet Why Choose the airMAX Lite AP GPS? 450+ Mbps airMAX AC Throughput Ubiquiti's airMAX AC protocol delivers up to 450+ Mbps real TCP/IP throughput with low latency and excellent client capacity — perfect for serving multiple subscribers from a single sector. Integrated 17 dBi Sector Antenna A high-performance integrated 17 dBi sector antenna provides focused 5 GHz coverage, letting you cover a wide service area from one efficient, all-in-one unit. GPS Synchronisation Built-in GPS sync coordinates transmit timing across co-located base stations, dramatically reducing self-interference so you can scale your network with more radios per tower. Dedicated Management Radio A separate 2.4 GHz management radio keeps the unit reachable and configurable even when the main 5 GHz link is saturated with subscriber traffic. Quick, Tool-Light Installation Minimal fasteners and a versatile ball-joint pole mount mean fast setup — only a single wrench is needed to mount and aim the unit on a pole. Rugged Outdoor Build Engineered for the elements with a wide −40°C to 70°C operating range, 200 km/h wind survivability, and ETSI shock & vibration certification for reliable year-round operation. Gigabit Ethernet & Passive PoE A single GbE RJ45 port carries data and power over one cable. The included 24V gigabit PoE adapter keeps power draw low at just 7.1 W max. NDAA Compliant The LAP-GPS is NDAA Section 889 compliant, making it suitable for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model LAP-GPS (airMAX Lite AP GPS) Processor airMAX AC (802.11ac) platform Throughput Up to 450+ Mbps real TCP/IP (GPS-synced) Antenna Gain 17 dBi integrated sector antenna Operating Modes Access Point • Station Radio Frequency (5 GHz) Worldwide: 5150–5875 MHz Management Radio (2.4 GHz) Worldwide: 2412–2472 MHz Channel Widths 30 / 50 / 60 MHz Max. TX Power 25 dBm GPS Sync Yes Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24V, 0.3A gigabit PoE adapter (included) Supported Voltage Range 20–27V DC Max. Power Consumption 7.1 W Dimensions 361 × 129.6 × 71.3 mm Weight 752 g Wind Survivability 200 km/h (125 mph) Wind Loading 77 N at 200 km/h Operating Temperature −40°C to 70°C Operating Humidity 5 to 95% non-condensing Shock & Vibration ETSI300-019-1.4 certified Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources LAP-GPS Tech Specs LAP-GPS Quick Start Guide What's in the Box airMAX Lite AP GPS Unit LAP-GPS sector access point with integrated 17 dBi antenna and GPS sync. 24V Gigabit PoE Adapter 24V, 0.3A gigabit PoE power adapter included. Pole Mounting Hardware Ball-joint pole mount and fasteners for quick, single-wrench installation. Not Included Outdoor-rated Ethernet cable is required and sold separately. Best For WISPs & ISPs Cost-effective 5 GHz sector AP to serve multiple subscribers from a single tower position. Point-to-Multipoint GPS sync lets you co-locate radios and scale capacity without crippling self-interference. Rural & Regional Coverage 17 dBi sector coverage and rugged build suit wide-area links across regional Australia. Campus & Site Backhaul Reliable 450+ Mbps wireless distribution for farms, mine sites, and multi-building campuses. Pairs with airMAX AC client devices (NanoStation 5AC, LiteBeam 5AC, PowerBeam 5AC) as subscriber units. Powered by the included 24V gigabit PoE adapter over a single Ethernet run. Mounts to a pole via the ball-joint bracket; only a single wrench is needed to aim. Enable GPS sync when co-locating multiple base stations to minimise interference. Frequently Asked Questions What is the difference between the LAP-GPS and the standard Lite AP? The LAP-GPS adds built-in GPS synchronisation, which coordinates transmit timing across co-located base stations to reduce interference — essential for scaling multi-sector towers. What throughput can the LAP-GPS deliver? GPS-synced airMAX AC units deliver up to 450+ Mbps of real TCP/IP throughput, depending on distance, channel width, and RF conditions. How is the LAP-GPS powered? It uses passive 2-pair PoE. A 24V, 0.3A gigabit PoE adapter is included in the box, and max power consumption is just 7.1 W. What antenna gain does it have? The LAP-GPS has an integrated 17 dBi sector antenna for focused 5 GHz coverage of a service area. Is it suitable for outdoor use in Australia? Yes. It operates from −40°C to 70°C, survives winds up to 200 km/h, and carries ETSI shock & vibration certification for harsh Australian conditions. Is the LAP-GPS NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the LAP-GPS is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UISP airMAX — NDAA Compliant Ubiquiti airMAX Lite AP — 5 GHz 16 dBi 120° Sector Access Point (LAP-120) The Ubiquiti airMAX Lite AP (LAP-120) is an ultra-lightweight 5 GHz sector access point with an integrated 16 dBi 120° antenna and airMAX AC technology — an affordable, high-performance base station for point-to-multipoint wireless networks. With a single GbE port, passive PoE power, and a versatile ball-joint mount, it deploys quickly to cover homes, farms, WISP networks, and remote sites across Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Antenna 16 dBi / 120° Band 5 GHz airMAX AC Power Passive PoE Survivability 200 km/h Wind Why Choose the airMAX Lite AP? Integrated 16 dBi 120° Sector A built-in 16 dBi sector antenna with a 120° coverage pattern lets a single base station serve multiple client radios across a wide area — ideal for point-to-multipoint deployments. airMAX AC Technology Ubiquiti's proprietary airMAX AC TDMA protocol delivers high throughput, low latency, and excellent scalability, outperforming standard Wi-Fi in noisy, high-client environments. Ultra-Lightweight Design At just 420 g, the airMAX Lite AP is fast to mount and easy on poles and brackets, while the versatile ball-joint mount makes precise aiming simple. Single-Cable PoE One Ethernet run carries both data and power. The included 24 V passive PoE adapter keeps installation simple — max consumption is just 8 W. Built to Survive the Elements Rated for 200 km/h wind survivability and a wide −40°C to 70°C operating range, the LAP-120 holds up to harsh Australian outdoor conditions year-round. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive networks where supply-chain integrity is required. Technical Specifications Model LAP-120 (airMAX Lite AP) Frequency Band 5 GHz — worldwide 5150–5875 MHz Antenna Gain 16 dBi integrated 120° sector Technology airMAX AC (TDMA) Operating Modes Access Point • Station Channel Widths 30 / 50 / 60 MHz Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24 V, 0.5 A gigabit PoE adapter (included) Supported Voltage Range 20–27 V DC Max. Power Consumption 8 W Dimensions 452.3 × 78.7 × 54.4 mm Weight 420 g Wind Loading 77 N at 200 km/h Wind Survivability 200 km/h Operating Temperature −40°C to 70°C Operating Humidity 5 to 95% non-condensing Shock & Vibration ETSI300-019-1.4 Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources LAP-120 Tech Specs airMAX Lite AP Installation Guide Best For WISP Base Stations Serve multiple subscriber radios from a single 120° sector for cost-effective point-to-multipoint coverage. Rural & Farm Networks Extend reliable 5 GHz connectivity across properties, sheds, and remote buildings where cabling isn't practical. Campus & Site Links Distribute network access across yards, depots, and multi-building sites with a single lightweight base station. Temporary Deployments Fast to mount and aim, making it ideal for events, construction sites, and short-term wireless coverage. Pairs with airMAX client radios (e.g. NanoStation, LiteBeam, NanoBeam) in point-to-multipoint mode. Powered by the included 24 V passive PoE adapter — not compatible with 802.3af/at switches. Versatile ball-joint mount allows precise alignment of the 120° sector after installation. Managed locally via airOS, or remotely through the UISP platform. Frequently Asked Questions What is the airMAX Lite AP used for? The LAP-120 is a 5 GHz sector base station for point-to-multipoint wireless networks — one access point serves many client radios across a 120° coverage area. How is it powered? It uses passive PoE via the included 24 V gigabit PoE adapter over a single Ethernet cable. Maximum power consumption is just 8 W. It is not 802.3af/at compatible. What antenna does it have? An integrated 16 dBi antenna with a 120° horizontal sector pattern — no external antenna is required. Is it suitable for outdoor use in Australia? Yes. With 200 km/h wind survivability and a −40°C to 70°C operating range, it is built for harsh Australian outdoor conditions. Is the LAP-120 NDAA compliant? Yes. The airMAX Lite AP is NDAA Section 889 compliant — suitable for government and security-sensitive deployments. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine Ubiquiti — NDAA Compliant Ubiquiti POE-24-24W-G Gigabit PoE Injector — 24V 24W (POE-24-24W-G) The Ubiquiti POE-24-24W-G is a 24 VDC, 24 W Gigabit PoE adapter that delivers both power and data to your Ubiquiti device over a single Ethernet run. It features surge and clamping protection, a high maximum surge discharge and peak pulse current rating, and an AC cable with earth ground to guard against electrostatic discharge (ESD) — the leading cause of outdoor device failures. Paired with grounded TOUGHCable and TOUGHCable Connectors, it keeps your equipment reliably protected. Genuine Ubiquiti stock with fast shipping right across Australia. 24V / 24W Output Supplies 24 VDC at 1 A (24 W) over standard Ethernet to power compatible Ubiquiti 24V passive PoE devices. Gigabit Data Gigabit LAN passthrough so power and high-speed data share a single cable run with no bottleneck. ESD & Surge Protection Surge protection, clamping protection, and an earth-grounded AC cable defend outdoor gear against ESD and electrical surges. NDAA Compliant Ubiquiti is a US-based manufacturer — NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model POE-24-24W-G Output Voltage 24 VDC Output Current 1 A Output Power 24 W Data Rate Gigabit (10/100/1000) LAN Protection Surge protection, clamping protection, maximum surge discharge, peak pulse current Grounding AC cable with earth ground (ESD protection) Brand Ubiquiti Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UISP — NDAA Compliant Ubiquiti UF-WiFi6 UFiber GPON CPE — WiFi 6, 2.4 Gbps GPON & 4× GbE The Ubiquiti UFiber WiFi 6 GPON CPE (UF-WiFi6) is a high-performance, point-to-multipoint fibre subscriber unit that brings gigabit GPON connectivity and built-in WiFi 6 to homes, offices, and ISP customer premises right across Australia. It delivers up to 2.4 Gbps downstream and 1.2 Gbps upstream over a single fibre line, with (1) GPON WAN port, (4) Gigabit RJ45 LAN ports, and powerful Layer 2/3 management — all in one tidy desktop unit. Genuine Ubiquiti stock with fast Australia-wide shipping. Wireless WiFi 6 (802.11ax) Downstream 2.4 Gbps GPON LAN Ports 4× GbE RJ45 Fibre Reach Up to 20 km Why Choose the Ubiquiti UF-WiFi6? Gigabit GPON Connectivity Reaches a 2.4 Gbps maximum downstream and 1.2 Gbps upstream line rate over a single fibre, delivering fast, reliable point-to-multipoint service to every premises. High-Efficiency WiFi 6 Built-in 2×2 802.11ax WiFi 6 with internal antennas — 2.4 GHz (2×2 MIMO, 300 Mbps) and 5 GHz (2×2 MU-MIMO + OFDMA, 1.2 Gbps) for fast, dense wireless coverage. Long-Distance Fibre Links Establishes reliable GPON links up to 20 kilometres, letting ISPs extend service range and grow their customer base without active equipment in the field. Four Gigabit LAN Ports (4) GbE RJ45 LAN ports plus (1) GPON WAN port connect wired devices and the upstream fibre line directly from the CPE. Layer 2/3 Management & VLANs Powerful Layer 2/3 management features with VLAN-aware switch ports give operators granular control over traffic, segmentation, and service delivery. Flexible Powering Powered by the included power adapter or passive PoE, making installation simple in a wide range of premises and rack-free environments. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive networks where supply-chain integrity is a requirement. Technical Specifications Model UF-WiFi6 (UFiber WiFi 6 GPON CPE) Type Point-to-multipoint GPON CPE with built-in WiFi 6 Max Downstream Line Rate 2.4 Gbps Max Upstream Line Rate 1.2 Gbps GPON Reach Up to 20 km WiFi Standard 2×2 high-efficiency WiFi 6 (802.11ax) 2.4 GHz Radio 2×2 MIMO • 300 Mbps radio rate 5 GHz Radio 2×2 MU-MIMO + OFDMA • 1.2 Gbps radio rate Antennas Internal WiFi 6 antennas WAN Port (1) GPON WAN port LAN Ports (4) GbE RJ45 LAN ports Management Layer 2/3 management, VLAN-aware switch ports Power Method Included power adapter or passive PoE Compliance NDAA compliant Downloads & Resources UF-WiFi6 Tech Specs Best For ISPs & WISPs Deliver gigabit GPON service to subscribers up to 20 km away and grow your customer base. Homes & Apartments One unit terminates the fibre and provides WiFi 6 plus four wired Gigabit ports. Offices & Businesses Fast wired and wireless connectivity with Layer 2/3 management and VLAN segmentation. Multi-Tenant Buildings Point-to-multipoint GPON makes per-unit fibre delivery efficient and scalable. Frequently Asked Questions What is the UF-WiFi6? It is Ubiquiti's UFiber WiFi 6 GPON CPE — a point-to-multipoint fibre subscriber unit with built-in WiFi 6, one GPON WAN port and four Gigabit LAN ports. How fast is it? Up to 2.4 Gbps downstream and 1.2 Gbps upstream over the GPON link, with WiFi 6 radios rated at 300 Mbps (2.4 GHz) and 1.2 Gbps (5 GHz). How far can the fibre link reach? The UF-WiFi6 establishes reliable GPON links up to 20 kilometres, ideal for extending ISP service range. How is it powered? It can be powered by the included power adapter or by passive PoE, giving flexible installation options. Is the UF-WiFi6 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UF-WiFi6 is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant UniFi Switch Enterprise XG 24 — 24-Port 10GbE Managed Layer 3 Switch (USW-EnterpriseXG-24) The UniFi Switch Enterprise XG 24 (USW-EnterpriseXG-24) is a fully managed, multi-gigabit Layer 3 switch built for high-throughput networks. It packs 24 × 10GbE RJ45 ports plus 2 × 25G SFP28 uplinks, a built-in 1.3″ LCM colour touchscreen with AR switch management, and optional redundant-power support. Whether you're wiring a data closet, AV studio, server room, or high-density office anywhere in Australia, it delivers enterprise performance under the intuitive UniFi Network app — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 24 × 10GbE RJ45 Uplinks 2 × 25G SFP28 Display 1.3″ Touchscreen Switching Managed Layer 3 Why Choose the UniFi Switch Enterprise XG 24? 24 × 10GbE RJ45 Ports Deliver 10 Gigabit connectivity over standard copper to servers, NAS units, workstations, and high-throughput access layers — no fibre runs required to reach 10G speeds. 2 × 25G SFP28 Uplinks High-bandwidth 25 Gigabit SFP28 uplinks aggregate traffic to your core or aggregation layer, keeping the network fast and congestion-free as it scales. Managed Layer 3 Switching Full Layer 3 routing and switching features let the Enterprise XG 24 route between VLANs and segments on its own, reducing load on upstream gateways. 1.3″ LCM Colour Touchscreen An onboard 1.3″ colour touchscreen with AR switch management surfaces key system and connection insights at a glance — right at the rack. Redundant Power Ready A dedicated USP RPS DC input adds power-supply failure protection when paired with the UniFi SmartPower Redundant Power System (sold separately) for mission-critical uptime. Tidy Single-Row Cabling A single-row RJ45 port layout lines up cleanly with patch panels, making cable management and servicing in dense racks far simpler. UniFi Network Management Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app — one pane of glass for your entire UniFi stack. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is mandatory. Technical Specifications Model USW-EnterpriseXG-24 (UniFi Switch Enterprise XG 24) Switching Layer Managed Layer 3 RJ45 Ports (24) 10GbE RJ45 SFP Ports (2) 25G SFP28 (uplinks) Display (1) 1.3″ LCM colour touchscreen with AR switch management Redundant Power (1) USP RPS DC input (USP RPS sold separately) Port Layout Single-row RJ45 for easy patch-panel cable management Management UniFi Network web application & mobile app Compliance NDAA compliant Downloads & Resources USW-EnterpriseXG-24 Datasheet Installation Guide What's in the Box UniFi Switch Enterprise XG 24 The USW-EnterpriseXG-24 managed Layer 3 switch. Mounting Hardware Rack-mount kit and screws for standard 19″ racks. Power Cable AC power cord for connection to mains. Not Included SFP28 transceivers, DAC cables, and the USP RPS redundant power system are sold separately. Best For Server Rooms & Data Closets 10GbE copper to every server and NAS with 25G uplinks back to the core for high throughput. AV & Production Studios High-bandwidth, low-latency switching for media editing, NDI, and large file transfers. High-Density Offices Layer 3 routing between VLANs keeps a busy corporate network fast and segmented. Aggregation Layer Acts as a powerful distribution switch feeding access-layer UniFi switches over 25G. Adopt and manage with the UniFi Network application running on a UniFi gateway, Cloud Key, or self-hosted host. Mounts in a standard 19″ rack; align the single-row RJ45 ports with your patch panel for clean cabling. Add a USP RPS via the DC input for power-supply redundancy on critical deployments. Populate the 25G SFP28 ports with Ubiquiti SFP28 transceivers or DAC cables for uplinks (sold separately). Frequently Asked Questions Is the Enterprise XG 24 a Layer 3 switch? Yes. The USW-EnterpriseXG-24 is a fully managed Layer 3 switch, so it can route between VLANs and network segments without relying solely on an upstream gateway. Do the 10GbE ports work over standard copper cabling? Yes. All 24 RJ45 ports deliver 10GbE over copper, so you can reach 10 Gigabit speeds without running fibre to each device. What are the 25G SFP28 ports for? The two 25G SFP28 ports are designed as uplinks to aggregate traffic back to your core or aggregation layer. Transceivers and DAC cables are sold separately. Can I add redundant power? Yes. The switch has a USP RPS DC input for enhanced power-supply failure protection when connected to the UniFi SmartPower Redundant Power System (sold separately). How is it managed? Through the UniFi Network web application and mobile app, plus the onboard 1.3″ colour touchscreen with AR switch management for at-the-rack insights. Is the Enterprise XG 24 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-Flex 3-Pack — Managed Layer 2 Gigabit PoE Switch (USW-Flex-3) The Ubiquiti UniFi USW-Flex is a compact, fully managed Layer 2 Gigabit switch built for flexible PoE deployments — and this listing includes a value 3-pack (USW-Flex-3). Each switch features five Gigabit ports with one PoE input and four auto-sensing 802.3af PoE outputs, a weatherproof housing for indoor or outdoor use, and full management through the UniFi Controller. Ideal for extending your UniFi network to cameras, access points, and IoT devices across homes, offices, and commercial sites anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5x Gigabit PoE Out 4x 802.3af Design Indoor / Outdoor Value 3-Pack Why Choose the UniFi USW-Flex 3-Pack? Managed Layer 2 Gigabit Switching Five Gigabit Ethernet ports deliver fast, reliable wired connectivity with full Layer 2 management — VLANs, QoS, and more — all configurable from the UniFi Controller. Flexible PoE In and Out One PoE input port powers the switch, while four ports offer auto-sensing 802.3af PoE output to power UniFi access points, cameras, and other PoE devices across your network. Up to 46W PoE Budget When powered by a 60W 802.3bt PoE++ source, the USW-Flex provides a maximum PoE output budget of 46W — enough headroom to run multiple downstream devices. Indoor / Outdoor Weatherproof Design A weatherproof housing lets the USW-Flex deploy indoors or outdoors, bringing managed PoE switching to locations a standard rack switch can’t reach. Versatile Mounting Install horizontally or vertically for desktop, magnetic wall-mount, or pole-mount setups — flexible placement for almost any environment. Seamless UniFi Integration Fully configurable through the UniFi Controller for single-pane-of-glass management alongside the rest of your UniFi network — no separate software required. Three Switches, One Pack This USW-Flex-3 listing bundles three switches — ideal for multi-room, multi-site, or larger PoE rollouts at better value than buying individually. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-Flex (3-Pack: USW-Flex-3) Switching Managed, Layer 2 Network Ports 5x Gigabit Ethernet (1x PoE In, 4x PoE Out) PoE Output Auto-sensing 802.3af on 4 ports PoE Input 802.3bt PoE++ (60W) / 802.3af / 802.3at Max PoE Output Budget 46W (when powered by 60W 802.3bt PoE++) Design Indoor / outdoor, weatherproof housing Mounting Horizontal or vertical • desktop, magnetic wall-mount, pole-mount Management UniFi Controller Compliance NDAA compliant Pack Contents 3x USW-Flex switch Downloads & Resources USW-Flex Tech Specs USW-Flex Datasheet (PDF) Best For Camera & AP Deployments Power and connect UniFi cameras and access points at the edge with auto-sensing 802.3af PoE. Indoor & Outdoor Sites Weatherproof housing brings managed PoE switching to balconies, eaves, sheds, and outbuildings. Multi-Room & Multi-Site The 3-pack covers several rooms or locations from a single value purchase. UniFi Network Expansion Extend an existing UniFi network with managed Gigabit ports under one controller. Managed within the UniFi Controller alongside the rest of your UniFi network. Power the switch via an 802.3bt PoE++ source (up to 60W) for the full 46W PoE output budget. Mount horizontally or vertically — desktop, magnetic wall-mount, or pole-mount. Suited to indoor and outdoor installations thanks to the weatherproof housing. Frequently Asked Questions How many switches come in this listing? This USW-Flex-3 listing includes a 3-pack — three USW-Flex managed switches in one purchase. How is the USW-Flex powered? It is powered over its PoE input port. For the full 46W PoE output budget, power it from a 60W 802.3bt PoE++ source. Which devices can it power? Four ports provide auto-sensing 802.3af PoE output, ideal for UniFi access points, cameras, and other 802.3af PoE devices. Can it be used outdoors in Australia? Yes. The USW-Flex has a weatherproof housing designed for indoor or outdoor use, with flexible desktop, wall, and pole mounting. How is it managed? Fully through the UniFi Controller, so it integrates seamlessly with the rest of your UniFi network from a single interface. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48-PoE — 48-Port Managed Gigabit PoE+ Switch (195W) The Ubiquiti UniFi USW-48-PoE is a fully managed Gigabit Layer 2 switch built for serious networks — 48 Gigabit Ethernet ports with 32 auto-sensing 802.3at PoE+ ports, four 1G SFP fibre uplinks, and a silent fanless design. With 195W of total PoE budget, it powers UniFi access points, cameras, and phones over a single cable while a 1.3″ colour touchscreen keeps you in control on-device. Whether you're wiring an office, retail fit-out, school, or warehouse anywhere in Australia, the USW-48-PoE delivers enterprise switching with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 48x GbE + 4x SFP PoE+ Ports 32x 802.3at PoE Budget 195W Total Display 1.3″ Touch LCM Why Choose the UniFi USW-48-PoE? 48 Gigabit Ports, 32 with PoE+ Connect up to 48 Gigabit Ethernet devices, with 32 ports delivering auto-sensing 802.3af/at PoE+ (up to 32W per port) to power access points, cameras, and IP phones over a single cable. Four 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you Gigabit fibre uplink options to your core network — ideal for longer runs and segregating uplink traffic from access ports. 195W Total PoE Availability A 240W internal AC/DC power supply provides 195W of total PoE budget, comfortably running a full complement of UniFi APs and cameras across the rack. 1.3″ Colour Touchscreen An on-device 1.3″ LCM colour touchscreen with AR switch management shows real-time status and port info — no laptop required for quick checks. Silent Fanless Cooling A fanless cooling design keeps the switch completely silent — perfect for offices, retail counters, and other noise-sensitive spaces. Managed by UniFi Network Configure and monitor every feature from the UniFi Network application and mobile app — VLANs, port profiles, mirroring, and aggregation, all in one graphical interface from anywhere. Advanced Layer 2 Switching An extensive suite of Layer 2 protocols with selectable per-port operation mode (switching, mirroring, or aggregate) gives you flexible, enterprise-grade control. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48-PoE Total Ports (48) 10/100/1000 RJ45 + (4) 1G SFP PoE+ Ports (32) GbE 802.3af/at PoE+ (Ports 1–32) Non-PoE Ports (16) GbE RJ45 Total PoE Availability 195W Max. PoE Wattage per Port 32W (802.3at) PoE Voltage Range 802.3af: 44–57V • 802.3at: 50–57V On-Device Display 1.3″ LCM colour touchscreen with AR switch management Management UniFi Network application + mobile app, Ethernet in-band Power Method 100–240VAC, 50/60 Hz, universal input Power Supply AC/DC, internal, 240W Max. Power Consumption (excl. PoE) 45W Cooling Fanless (silent) ESD / EMP Protection Air: ±16 kV • Contact: ±12 kV Shock & Vibration ETSI300-019-1.4 standard Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10 to 90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-48-PoE Datasheet Ubiquiti Installation Guide What's in the Box UniFi USW-48-PoE Switch 48-port managed Gigabit PoE+ switch with integrated 240W power supply. Rack-Mount Hardware Mounting brackets and screws for standard 19″ rack installation. Power Cable AC power cable for 100–240VAC universal input. Documentation Quick-start guide and installation instructions. Best For Offices & Corporate High-density desk connectivity with PoE+ powering UniFi APs, IP phones, and cameras. Retail & Hospitality Silent fanless operation suits front-of-house counters, registers, and quiet spaces. Schools & Campuses 48 Gigabit ports plus fibre uplinks scale across classrooms and shared infrastructure. Warehouses & Sites Centralised PoE for cameras and APs across large floor areas, managed from anywhere. Managed by the UniFi Network application — a UniFi Network host (Cloud Key, Dream Machine, or self-hosted controller) is recommended for full features. Mounts in a standard 19″ rack using the included brackets. 32 PoE+ ports (1–32) auto-sense 802.3af/at devices; remaining ports are data-only Gigabit. Use the four SFP ports for Gigabit fibre uplinks to your core or distribution switch. Frequently Asked Questions How many PoE ports does the USW-48-PoE have? 32 of the 48 Gigabit ports (ports 1–32) deliver auto-sensing 802.3af/at PoE+, up to 32W per port, with a total PoE budget of 195W. Do I need a separate controller? The switch is managed by the UniFi Network application. A UniFi Network host such as a Cloud Key, Dream Machine, or self-hosted controller is recommended to configure and monitor it. Is the USW-48-PoE fanless? Yes. It uses a silent fanless cooling design, making it well suited to offices, retail spaces, and other noise-sensitive environments. What are the SFP ports for? The four 1G SFP ports provide Gigabit fibre uplink options to your core or distribution network for longer runs and dedicated uplinks. Is the USW-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48-PoE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Pro 48 — 48-Port Gigabit Layer 3 Managed Switch with 4x 10G SFP+ (USW-PRO-48) The Ubiquiti UniFi Switch Pro 48 (USW-PRO-48) is a fully managed Layer 3 switch built for high-density UniFi deployments anywhere in Australia. It pairs 48 Gigabit RJ45 ports with four 10G SFP+ uplinks for link aggregation and increased availability, adds Layer 3 features such as inter-VLAN routing, static routing, and a DHCP server, and runs near-silent thanks to its intelligent cooling design. A 1.3″ touchscreen display and full UniFi Network integration make it an ideal aggregation or access-layer switch — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 48x Gigabit RJ45 Uplinks 4x 10G SFP+ Layer L2 & L3 Managed Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48? 48 Gigabit Ports for High Density Connect up to 48 devices over Gigabit RJ45 — APs, cameras, workstations, and servers — from a single 1U rack-mount switch, making it ideal for busy offices, schools, and commercial sites. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-capacity uplinks and link aggregation, delivering the bandwidth and redundancy needed for demanding aggregation and access-layer roles. Full Layer 2 & Layer 3 Routing Beyond rich Layer 2 switching, the Pro 48 adds Layer 3 functionality including inter-VLAN routing, static routing, and a DHCP server — consolidating network roles into one device. Near-Silent Cooling Innovative, intelligent cooling keeps the switch running near-silent, so it can be deployed in offices and quiet environments without disruptive fan noise. UniFi SmartPower RPS Redundancy A dedicated UniFi SmartPower RPS DC input supports redundant power, helping keep critical network infrastructure online if mains power is interrupted. 1.3″ Touchscreen Display An integrated 1.3″ touchscreen surfaces live status, port activity, and system information directly on the switch for quick at-a-glance monitoring. Managed by UniFi Network Configure and monitor virtually every feature from the UniFi Network controller or mobile app — an intuitive single-pane interface accessible from anywhere. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-PRO-48 Management Fully managed, Layer 2 & Layer 3 Gigabit RJ45 Ports 48 x Gigabit Ethernet (10/100/1000) SFP+ Uplinks 4 x 10G SFP+ Layer 3 Features Inter-VLAN routing, static routing, DHCP server Link Aggregation Supported (SFP+ uplinks) Display 1.3″ touchscreen Power Redundancy UniFi SmartPower RPS DC input Cooling Near-silent intelligent cooling Management Software UniFi Network controller & mobile app Form Factor Rack-mountable (1U) Compliance NDAA compliant Downloads & Resources USW-PRO-48 Datasheet UniFi Network Overview Best For Offices & Workplaces High-density Gigabit connectivity for desks, APs, and IP phones, managed centrally from UniFi Network. Schools & Campuses Layer 3 routing and 48 ports per switch make it ideal for segmented, multi-VLAN education networks. CCTV & AP Aggregation 10G SFP+ uplinks aggregate traffic from access switches, cameras, and wireless access points. Commercial & MDU Sites Near-silent cooling and RPS redundancy suit racks in busy commercial and multi-dwelling installs. Adopt into an existing UniFi Network deployment (UniFi controller, Cloud Key, or Dream Machine) for centralised management. Use the 4 x 10G SFP+ ports for high-capacity uplinks or link aggregation to your core/aggregation layer. Note: the USW-PRO-48 is a non-PoE switch — choose USW-Pro-48-PoE if your devices require PoE. Add a UniFi SmartPower RPS for redundant DC power on critical infrastructure. Frequently Asked Questions Does the USW-PRO-48 supply PoE? No. The USW-PRO-48 is a non-PoE managed switch. If you need to power PoE devices such as cameras or access points directly, choose the USW-Pro-48-PoE model instead. Is the Switch Pro 48 a Layer 3 switch? Yes. It is fully managed with Layer 2 and Layer 3 features including inter-VLAN routing, static routing, and a DHCP server. What do I need to manage it? A UniFi Network host — such as a Cloud Key, UniFi Dream Machine, or self-hosted controller — lets you configure and monitor the switch from the UniFi app or web interface. Can I use the SFP+ ports for redundancy? Yes. The four 10G SFP+ uplinks support link aggregation for higher capacity and increased availability between switches. Is the USW-PRO-48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the Switch Pro 48 is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW Flex Mini — 5-Port Managed Gigabit Switch (USW-Flex-Mini) The Ubiquiti UniFi USW Flex Mini is a fully managed, Layer 2 Gigabit switch with five GbE RJ45 ports in an ultra-compact, slim housing. Powered flexibly by 802.3af PoE on Port 1 or by the included 5V USB-C adapter, it's the perfect way to add managed ports anywhere — behind a TV, on a desk, in a comms cabinet, or out at a UniFi camera cluster. Monitor and configure it from anywhere through the intuitive UniFi Network web and mobile app. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Ports 5x GbE RJ45 Power PoE or USB-C Switching Capacity 10 Gbps Management UniFi Network Why Choose the UniFi USW Flex Mini? Five Gigabit Ports, Tiny Footprint Five 10/100/1000 GbE RJ45 ports in a remarkably small, slim chassis — add managed connectivity behind a desk, TV, or AP without taking up rack or shelf space. Powered by PoE or USB-C Run it from an 802.3af PoE source on Port 1 — no separate power outlet needed — or use the included 5V/1A USB-C adapter. Total flexibility for any install location. Fully Managed Layer 2 VLANs, port profiles, and monitoring are all configurable from the UniFi Network controller — enterprise-grade control in a switch that fits in your palm. 10 Gbps Switching Capacity A non-blocking switching capacity of 10 Gbps keeps every port running at full Gigabit speed, with smooth performance across all five connections. Manage From Anywhere Adopt and manage the Flex Mini remotely through the powerful, intuitive UniFi Network web and mobile app — alongside the rest of your UniFi fleet. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-Flex-Mini Switch Type Fully managed, Layer 2 Network Ports (5) GbE RJ45 (10/100/1000 Mbps) PoE Input (1) 802.3af PoE input on Port 1 Power Method 802.3af PoE (Port 1) or included 5V/1A USB-C adapter Max Power Consumption 2.5 W Switching Capacity 10 Gbps Total Non-Blocking Throughput 5 Gbps Forwarding Rate 7 Mpps Management UniFi Network (web & mobile app) Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Tech Specs Ubiquiti Datasheet (PDF) What's in the Box USW Flex Mini Switch The 5-port managed Gigabit switch (single pack). USB-C Power Adapter Included 5V/1A USB-C adapter for non-PoE installations. Documentation Quick start guide and installation instructions. Not Included Ethernet cables and any PoE source are sold separately. Best For Homes & Media Setups Add managed ports behind a TV or desk for consoles, streamers, and smart-home gear. Small Offices Expand a UniFi network with a few extra Gigabit ports — managed from the same controller. Camera & AP Clusters PoE-powered placement out at a camera or access-point group keeps cabling simple. Comms Cabinets A compact managed switch that drops neatly into tight cabinet spaces. Adopt and manage via a UniFi Network host (Cloud Key, Dream Machine, or self-hosted controller). Power from an 802.3af PoE source on Port 1, or use the included 5V USB-C adapter. Fully managed Layer 2 — configure VLANs and port profiles from UniFi Network. Compact, slim housing suits desks, cabinets, and behind-equipment placement. Frequently Asked Questions How is the USW Flex Mini powered? Two ways: by 802.3af PoE on Port 1, or by the included 5V/1A USB-C power adapter. No separate power outlet is needed when using PoE. Is the Flex Mini a managed switch? Yes. It's a fully managed Layer 2 switch — VLANs, port profiles, and monitoring are all configurable through UniFi Network. Does it output PoE to other devices? No. The 802.3af PoE on Port 1 is a power input for the switch itself. The Flex Mini does not supply PoE to connected devices. What do I need to manage it? A UniFi Network host — such as a Cloud Key, a UniFi Dream Machine, or a self-hosted UniFi Network controller. Is the USW Flex Mini NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW Flex Mini is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch with Touch Display (USW-Pro-48-PoE) The UniFi Switch Pro 48 PoE (USW-Pro-48-PoE) is a fully managed Layer 2 / Layer 3 access-layer switch built for demanding UniFi networks. It pairs (40) Gigabit PoE+ RJ45 ports, (8) Gigabit PoE++ RJ45 ports, and (4) 10G SFP+ uplinks with advanced routing — inter-VLAN routing, static routing, and a built-in DHCP server. With up to 600W of total PoE, a 1.3″ colour touchscreen, USP RPS power-redundancy input, and near-silent cooling, it's the ideal aggregation point for offices, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48x GbE + 4x 10G SFP+ PoE Budget 600W Total Switching Layer 2 + Layer 3 Display 1.3″ Touchscreen Why Choose the UniFi Switch Pro 48 PoE? 48 Gigabit PoE Ports Power and connect up to 48 devices over a single cable each — (40) GbE PoE+ ports for APs, cameras, and phones, plus (8) GbE PoE++ (802.3bt) ports for high-draw devices like PTZ cameras and multi-radio access points. 600W Total PoE Budget A generous 600W PoE supply drives a full rack of powered devices, with USP RPS redundant-power input support to keep critical infrastructure online during a power-supply fault. Layer 3 Routing Built In Beyond a rich Layer 2 feature set, the Pro 48 PoE adds inter-VLAN routing, static routing, and a DHCP server — offload routing from your gateway and segment networks right at the access layer. 4x 10G SFP+ Uplinks Four 10G SFP+ ports provide high-bandwidth uplinks and aggregation to the core, eliminating bottlenecks between switches, servers, and storage. 1.3″ Colour Touch Display An onboard 1.3″ LCM colour touchscreen with AR switch management surfaces port status, throughput, and uptime at a glance — no laptop required at the rack. Managed in UniFi Network Configure and monitor from anywhere through the powerful UniFi Network web and mobile app. Near-silent cooling keeps it quiet enough for offices and comms rooms alike. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Pro-48-PoE (Gen2) Management Fully managed, Layer 2 + Layer 3 PoE+ RJ45 Ports (40) GbE, 802.3at PoE+ PoE++ RJ45 Ports (8) GbE, 802.3bt PoE++ SFP+ Ports (4) 10G SFP+ Total PoE Power 600W Power Redundancy (1) USP RPS DC input Display 1.3″ LCM colour touchscreen with AR switch management Layer 3 Features Inter-VLAN routing, static routing, DHCP server Cooling Near-silent active cooling Management Software UniFi Network application, version 5.10.5 and later Compliance NDAA compliant Downloads & Resources USW-Pro-48-PoE Datasheet Ubiquiti Quick Start Guide Best For Offices & Workplaces Powers desk phones, APs, and cameras across a floor with PoE+ and PoE++ headroom to spare. Retail & Hospitality VLAN-segment guest, POS, and CCTV traffic with Layer 3 routing handled at the switch. CCTV Aggregation 48 PoE ports plus 10G SFP+ uplinks to a UniFi NVR make it an ideal camera access switch. Comms Rooms Near-silent cooling, a touch display, and USP RPS redundancy suit always-on infrastructure. Adopt and manage with the UniFi Network application (version 5.10.5 or later) via a UniFi gateway or Cloud Key. Mixes 802.3at PoE+ and 802.3bt PoE++ ports — check device draw against the 600W total budget. Add a UniFi SmartPower RPS (USP RPS) via the DC input for redundant-power protection. Use the (4) 10G SFP+ ports for high-bandwidth uplinks or aggregation to the network core. Frequently Asked Questions How much PoE power does the USW-Pro-48-PoE provide? It supplies up to 600W of total PoE across its 48 ports — (40) 802.3at PoE+ ports and (8) 802.3bt PoE++ ports for higher-draw devices. Does this switch support Layer 3 routing? Yes. It's a fully managed Layer 2 + Layer 3 switch with inter-VLAN routing, static routing, and a built-in DHCP server. What do I need to manage it? The UniFi Network application (version 5.10.5 or later), running on a UniFi gateway, Dream Machine, or Cloud Key. Configure and monitor from the web or mobile app anywhere. Can I add power redundancy? Yes. The USP RPS DC input lets you connect a UniFi SmartPower Redundant Power System to keep the switch running through a power-supply fault. What are the 10G SFP+ ports for? The four 10G SFP+ ports are high-bandwidth uplinks — ideal for aggregating to the core, linking switches, or connecting to a UniFi NVR or server. Is the USW-Pro-48-PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant UniFi Pro 24 PoE — Managed 24-Port Gigabit Layer 3 PoE++ Switch (USW-Pro-24-POE) The Ubiquiti UniFi Pro 24 PoE (USW-Pro-24-POE) is an enterprise-grade managed switch with 24 Gigabit RJ45 ports — 16 delivering 802.3af/at PoE+ and 8 delivering high-power 802.3bt PoE++ up to 64 W per port — plus dual 10G SFP+ uplinks and full Layer 3 routing. With a 400 W total PoE budget, an 88 Gbps switching capacity, and a built-in 1.3″ touchscreen, it powers and manages cameras, access points, VoIP phones, and IoT devices from a single pane of glass in UniFi Network. Genuine Ubiquiti stock with fast shipping right across Australia. Ports 24 × Gigabit PoE PoE Budget 400 W Total Uplinks 2 × 10G SFP+ Routing Layer 3 Why Choose the UniFi Pro 24 PoE? 24 Gigabit PoE Ports Sixteen 802.3af/at PoE+ ports plus eight 802.3bt PoE++ ports (up to 64 W each) power cameras, access points, phones, and IoT devices directly — no separate injectors required. 400 W Total PoE Budget A 450 W internal AC/DC power supply delivers a 400 W total PoE budget, comfortably running a mixed fleet of legacy PoE and high-power PoE++ devices at once. Dual 10G SFP+ Uplinks Two 1/10G SFP+ ports provide high-speed fibre or DAC aggregation to your core network or storage server, with plenty of headroom for surveillance and multi-AP sites. Full Layer 3 Routing Beyond Layer 2 switching, the Pro 24 PoE adds inter-VLAN routing, static routing, DHCP server and DHCP relay — keeping traffic local and fast without a separate router. High-Performance Hardware An 88 Gbps switching capacity, 44 Gbps non-blocking throughput, 65 Mpps forwarding rate, and support for 1,000 VLANs handle demanding enterprise and surveillance LANs with ease. 1.3″ Touchscreen Display A built-in 1.3″ LCM touchscreen shows live status and port information for quick monitoring and troubleshooting right at the rack. Managed by UniFi Network Provision, monitor and configure everything — VLANs, PoE scheduling, LACP, QoS, 802.1X, port mirroring — from the UniFi Network controller or mobile app, no licence fees. Power Redundancy + NDAA A USP-RPS DC backup input guards against PSU failure, while full NDAA Section 889 compliance suits government, defence, and security-sensitive sites. Technical Specifications Model USW-Pro-24-POE (UniFi Pro 24 PoE) RJ45 Ports 24 × Gigabit (10/100/1000) — 16 × 802.3af/at PoE+, 8 × 802.3bt PoE++ SFP+ Uplinks 2 × 1/10G SFP+ Max PoE per Port PoE+ 30 W • PoE++ 64 W Total PoE Budget 400 W Switching Capacity 88 Gbps Non-Blocking Throughput 44 Gbps Forwarding Rate 65 Mpps Layer Layer 3 (inter-VLAN routing, static routing, DHCP server/relay) Supported VLANs 1,000 MAC Address Table 16,000 L2 Features LACP, STP/RSTP, QoS (DSCP), IGMP snooping, 802.1X, port mirroring, jumbo frames, storm control Display 1.3″ LCM touchscreen Power Supply AC/DC internal, 450 W • 100–240 V AC, 50/60 Hz Redundancy USP-RPS DC backup input Max Power Consumption 50 W (excluding PoE output) Form Factor 1U rack mount (brackets included) Enclosure SGCC steel Dimensions / Weight 442 × 285 × 44 mm • 4.3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing Management UniFi Network (v5.10.5 and later) & mobile app Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Pro-24-POE Datasheet Ubiquiti Installation Guide What's in the Box UniFi Pro 24 PoE Switch The USW-Pro-24-POE managed Layer 3 PoE++ switch in its 1U steel chassis. Rackmount Kit Rack-mount brackets and screws for a clean 1U install in any standard rack. Power Cord Mains power cord for the internal 450 W AC/DC power supply. Not Included SFP+ modules/DAC cables and a USP-RPS for power redundancy are sold separately. Best For CCTV & Surveillance Power and manage UniFi Protect cameras over a single cable with plenty of PoE headroom and 10G uplinks to the NVR. Offices & Campuses Drive access points, VoIP phones, and IoT across VLANs with Layer 3 routing keeping traffic local and fast. Smart Buildings High-power 802.3bt PoE++ runs PTZ cameras, displays, and access control without separate power runs. Edge Aggregation Dual 10G SFP+ uplinks aggregate downstream switches into the core for multi-service edge LANs. Adopt and manage through a UniFi Network host — Cloud Gateway, Cloud Key, or UniFi Network self-hosted (v5.10.5+). Mounts in any standard 1U rack space with the included brackets; supports 400–1200 mm rack depth. Use SFP+ DAC or fibre transceivers for 10G uplinks to your core or NVR (sold separately). Add a USP-RPS to the DC backup input for automatic power-supply failover (sold separately). Frequently Asked Questions What PoE standards does the USW-Pro-24-POE support? 16 ports deliver 802.3af/at PoE+ (up to 30 W) and 8 ports deliver 802.3bt PoE++ (up to 64 W), with a 400 W total PoE budget across all ports. Is this a Layer 3 switch? Yes. The Pro 24 PoE supports Layer 3 features including inter-VLAN routing, static routing, and DHCP server/relay, alongside full Layer 2 switching. How do I manage it? It's managed through UniFi Network (version 5.10.5 or later) via the controller or mobile app — no subscription or licence fees. What are the uplink options? Two 1/10G SFP+ ports allow high-speed fibre or DAC aggregation to your core network, storage server, or NVR. Does it support power redundancy? Yes. A USP-RPS DC backup input provides automatic failover if the internal 450 W power supply fails (USP-RPS sold separately). Is the Pro 24 PoE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Pro-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-24-POE — 24-Port Gigabit PoE+ Managed Switch (Gen2) The Ubiquiti UniFi USW-24-POE is a configurable Gigabit Layer 2 managed switch built for homes, offices, retail spaces, and commercial sites across Australia. It delivers twenty-four Gigabit RJ45 ports — sixteen of them auto-sensing 802.3at PoE+ — plus two 1G SFP fibre uplinks, all in a compact, silent fanless 1U chassis with a 1.3″ touchscreen display. Managed end-to-end through the UniFi Network controller and mobile app, it powers UniFi access points, cameras, and IoT devices over a single cable with no monthly fees. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 24x GbE + 2x SFP PoE+ 16 Ports • 95W Switching 52 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-24-POE? 24 Gigabit Ports + 2 SFP Uplinks Twenty-four 1G/100M/10M RJ45 ports connect your wired devices, while two 1G SFP ports provide fibre uplink options into your wider network. 16x 802.3at PoE+ — 95W Total Sixteen auto-sensing PoE+ ports (up to 32W per port) power UniFi access points, cameras, and phones over a single cable, backed by a 120W internal PSU and 95W of total PoE availability. 52 Gbps Switching Capacity A non-blocking architecture delivers 52 Gbps switching capacity and a 39 Mpps forwarding rate — ample headroom for busy multi-device networks. Silent Fanless Design A passively cooled SGCC steel 1U chassis runs completely silent — ideal for offices, studios, retail counters, and SOHO racks where noise matters. 1.3″ Touchscreen Display An onboard 1.3″ touch LCM surfaces port status, PoE load, and network information at a glance — no laptop required for quick checks. Advanced Layer 2 Features Full VLANs (up to 1,000), LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, port mirroring, storm control, and jumbo frames give you enterprise-grade control. UniFi Network Managed Configure and monitor every port from the UniFi Network controller or mobile app — one pane of glass for your entire UniFi stack, with no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model USW-24-POE (UniFi Standard 24 PoE, Gen2) Port Layout 24x GbE RJ45 (16 PoE+, 1G/100M/10M) + 2x 1G SFP PoE Standard 802.3at PoE+ on 16 ports • up to 32W per port Total PoE Availability 95W Switching Capacity 52 Gbps Non-Blocking Throughput 26 Gbps Forwarding Rate 39 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer 2 Features LACP, STP/RSTP, IGMP snooping, 802.1X, ACLs, DHCP snooping, port mirroring, storm control, jumbo frames, LLDP-MED, voice VLAN Display 1.3″ touchscreen LCM Cooling Fanless (passive) Form Factor Rack mount (1U) Power Method Universal input 100–240V AC, 50/60 Hz Power Supply AC/DC internal, 120W Max. Power Consumption 25W (excl. PoE) • 120W (incl. PoE output) Management UniFi Network (v7.2.94 and later) Enclosure SGCC steel Dimensions / Weight 442 × 200 × 44 mm • 3 kg Operating Temperature −5°C to 40°C, 10–90% non-condensing ESD Protection Air: ±16 kV • Contact: ±12 kV Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-24-POE Datasheet Ubiquiti Installation Guide Best For UniFi Networks Power and manage UniFi APs, cameras, and IoT devices over a single cable from one controller. Offices & Studios Silent fanless operation makes it ideal for desks, racks, and noise-sensitive workspaces. Retail & Hospitality Run cameras, access points, and POS gear with VLAN segmentation and PoE+ in one tidy unit. SOHO Racks Compact 1U depth and a touch display suit small server cabinets and comms cupboards. Managed by the UniFi Network controller (v7.2.94+) — runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted host. 16 PoE+ ports power UniFi access points and cameras directly; 95W total PoE budget. Two 1G SFP ports accept fibre or DAC uplinks into your core network. Mounts in a standard 1U rack; fanless design needs no special ventilation. Frequently Asked Questions How many PoE ports does the USW-24-POE have? Sixteen of the twenty-four Gigabit ports are 802.3at PoE+ (up to 32W per port), with 95W of total PoE availability across the switch. Does it require a separate controller? It is managed through UniFi Network, which runs on a UniFi Cloud Gateway, Cloud Key, or self-hosted server. There are no licensing or subscription fees. Is it fanless? Yes. The USW-24-POE uses passive cooling for completely silent operation, making it ideal for offices and quiet environments. What are the SFP ports for? The two 1G SFP ports provide fibre or DAC uplink options to connect the switch into your wider network core. Is the USW-24-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-24-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UniFi USW-16-POE — 16-Port Gigabit Managed PoE+ Switch (Standard 16 PoE) The Ubiquiti UniFi USW-16-POE (UniFi Standard 16 PoE) is a 16-port Layer 2 managed Gigabit switch with eight PoE+ ports, two 1G SFP uplinks, and a silent fanless design — ideal for powering UniFi access points, cameras, and other PoE devices from a single rack-mounted unit. With a built-in 1.3″ touchscreen display, a 36 Gbps switching capacity, and full UniFi Network integration, it is a clean backbone for homes, offices, and small commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 16x GbE + 2x SFP PoE 8x PoE+ • 42W Capacity 36 Gbps Cooling Fanless / Silent Why Choose the UniFi USW-16-POE? 16 Gigabit Ports + 2 SFP Uplinks Sixteen GbE RJ45 ports (10/100/1000) plus two 1G SFP uplink slots give you plenty of wired connectivity and fibre-ready uplinks for connecting to a core switch or gateway. 8x PoE+ — 42W Total Budget Eight ports deliver PoE/PoE+ up to 32W per port with a 42W total PoE budget — enough to power UniFi access points, cameras, and other PoE devices over a single cable. Silent Fanless Cooling A passive, fanless cooling system keeps the switch completely silent — perfect for offices, studios, and any space where noise matters. 1.3″ Touchscreen Display An on-device 1.3″ touchscreen shows port status, throughput, and device info at a glance — no need to open a laptop for quick checks. Layer 2 Managed — Full UniFi Control Manage VLANs, LACP, STP/RSTP, port isolation, 802.1X, ACLs, and more through UniFi Network — enterprise switching features in a single pane of glass. 1U Rack Mount — SGCC Steel A rugged SGCC steel 1U enclosure with included rack brackets fits standard server racks and supports 400–1200 mm rack depths. 36 Gbps Switching Capacity With 18 Gbps non-blocking throughput and a 36 Gbps switching capacity, the USW-16-POE handles busy networks without bottlenecks. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-16-POE (UniFi Standard 16 PoE) Networking Interface (16) GbE RJ45 (10/100/1000) • (2) 1G SFP PoE Ports (8) PoE/PoE+ Max. PoE per Port PoE: 15.4W • PoE+: 32W Total PoE Availability 42W Switching Capacity 36 Gbps Non-Blocking Throughput 18 Gbps Forwarding Rate 27 Mpps Supported VLANs 1,000 MAC Address Table 8,000 Layer Layer 2 managed Display 1.3″ touchscreen (LCM) Power Method Universal input, 100–240V AC, 50/60 Hz Power Supply AC/DC, internal, 60W Max. Power Consumption 18W (excl. PoE) • 60W (incl. PoE output) Cooling Fanless / passive Form Factor Rack mount (1U) Enclosure SGCC steel Dimensions 442 × 200 × 44 mm Weight 2.8 kg (2.9 kg with brackets) Operating Temperature −5°C to 40°C, 10–90% non-condensing Application Requirements UniFi Network 7.2.94 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-16-POE Datasheet USW-16-POE Installation Guide What's in the Box UniFi USW-16-POE Switch The 16-port Standard 16 PoE managed switch with fanless cooling. Rack-Mount Brackets 1U rack-mount brackets and mounting hardware included. Power Cable AC power cable for the internal 60W power supply. Not Included SFP modules and network cables are sold separately. Best For Homes & Studios Silent fanless operation makes it ideal for living spaces, home offices, and recording studios. Offices & SMBs Power UniFi APs and IP phones over PoE+ while managing VLANs and security from UniFi Network. UniFi Camera Sites Run UniFi Protect cameras on PoE+ with a clean rack-mounted backbone. Server Racks 1U SGCC steel chassis with included brackets fits standard 19″ racks. Requires a UniFi Network host (Cloud Gateway, Dream Machine, Cloud Key, or self-hosted) running UniFi Network 7.2.94 or later for full management. Eight PoE+ ports share a 42W total PoE budget — plan device power draw accordingly. Use the two 1G SFP ports for fibre or high-speed copper uplinks to a core switch or gateway. Mounts in a standard 1U rack space using the included SGCC steel brackets. Frequently Asked Questions How much PoE can the USW-16-POE deliver? It has eight PoE/PoE+ ports (up to 32W per port) sharing a 42W total PoE budget. The internal power supply is rated at 60W, which covers both the switch and PoE output. Is the USW-16-POE fanless? Yes. It uses a passive, fanless cooling system for completely silent operation — ideal for offices, studios, and quiet environments. Does it need a UniFi controller? For full management you need a UniFi Network host such as a Cloud Gateway, Dream Machine, or Cloud Key running UniFi Network 7.2.94 or later. What are the SFP ports for? The two 1G SFP ports provide fibre or high-speed copper uplinks to a core switch or gateway. SFP modules are sold separately. Is the USW-16-POE NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-16-POE is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Can I rack-mount it? Yes. It is a 1U rack-mount switch and ships with SGCC steel mounting brackets for standard 19″ racks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi Switch Flex (USW-Flex) — Outdoor Layer 2 Managed Gigabit PoE++ Switch The Ubiquiti UniFi Switch Flex (USW-Flex) is a compact, weatherproof 5-port Layer 2 managed Gigabit switch built to extend your network and PoE devices to places a normal switch can't go. It draws all its power over a single PoE++ uplink, then redistributes up to 46 W of PoE+ across four ports — perfect for powering UniFi cameras, access points, and IoT devices outdoors or in tight spaces. Fully managed through the UniFi Network application, it's ideal for homes, offices, and commercial sites anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Ports 5 × GbE PoE Budget 46 W PoE+ Build Outdoor-Ready Management UniFi Network Why Choose the UniFi Switch Flex? Powered Entirely Over PoE++ No power brick at the switch — the USW-Flex is powered by a single PoE++ uplink or a 60 W PoE adapter, so you can place it almost anywhere a network cable reaches. 46 W of PoE+ Output When fed by a PoE++ source, four GbE ports deliver up to 46 W total (25 W max per port), enough to run UniFi cameras, access points, and other PoE devices downstream. Outdoor-Ready Design A rugged polycarbonate enclosure operates from −40°C to 65°C and 5–95% humidity, making it suitable for sheltered outdoor and demanding Australian environments. Full Layer 2 Management VLANs, port isolation, port mirroring, flow control, jumbo frames, and egress rate limiting — all configured through the UniFi Network application with no per-device licensing. Flexible Mounting Compact 122.5 × 107.1 mm form factor mounts on a desk, wall, or pole, letting you bring switching and PoE exactly where it's needed. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex Networking Interface (5) GbE RJ45 ports (1G / 100M / 10M) PoE Ports 4 × PoE+ output • 1 × PoE++ input Total Available PoE 46 W (PoE++ / 60 W adapter input) • 20 W (PoE+ input) • 8 W (PoE input) Max. PoE per Port 25 W (PoE+) Switching Capacity 10 Gbps Non-Blocking Throughput 5 Gbps Forwarding Rate 7 Mpps Supported VLANs 1,000 MAC Address Table 2,000 Layer 2 Features Egress rate limit, flow control, port isolation, port mirroring, jumbo frames Power Method PoE++ • 50–57V DC supported range Max. Power Consumption 5 W (excluding PoE output) Management UniFi Network application (Version 5.10.3 and later) Enclosure Polycarbonate • outdoor-ready Mounting Compact desktop, wall, pole ESD Protection Air / contact: ±16 kV Operating Temperature −40°C to 55°C (46 W PoE) • −40°C to 65°C (25 W PoE) Operating Humidity 5 to 95% non-condensing Dimensions / Weight 122.5 × 107.1 × 28 mm • 230 g Certifications CE, FCC, IC, Anatel Compliance NDAA compliant Downloads & Resources USW-Flex Datasheet Ubiquiti Installation Guide What's in the Box UniFi Switch Flex (USW-Flex) The 5-port outdoor-ready managed PoE++ switch. Mounting Hardware Brackets and screws for desk, wall, or pole installation. Documentation Quick-start guide and installation instructions. Not Included A PoE++ switch or 60 W PoE adapter is required to power the unit and unlock the full 46 W PoE budget (sold separately). Best For Outdoor Camera Clusters Power and connect several UniFi cameras from one PoE++ uplink at the far end of a run. Remote Access Points Extend wired backhaul and PoE to APs in sheds, gates, and outbuildings. Desk & Edge Expansion Add managed ports to a desk or AV rack without running a new power circuit. IoT & Smart Sites Segment and power IoT devices with VLANs and port isolation on the network edge. Requires a UniFi Network host (UniFi Cloud Gateway, Dream Machine, or Cloud Key) running the UniFi Network application 5.10.3 or later. Power the switch with a PoE++ source or 60 W PoE adapter to access the full 46 W downstream PoE budget. Lower-power inputs still work: PoE+ input gives 20 W and standard PoE input gives 8 W of downstream PoE. Mounts to desk, wall, or pole; suited to sheltered outdoor placements within its rated temperature range. Frequently Asked Questions How is the USW-Flex powered? Entirely over its PoE input port. Use a PoE++ switch or a 60 W PoE adapter to get the full 46 W of downstream PoE; PoE+ and standard PoE inputs work too, with smaller budgets. How much PoE can it deliver to my devices? Up to 46 W total across four PoE+ ports (25 W max per port) when fed by a PoE++ source — enough for UniFi cameras, access points, and IoT devices. Can it be used outdoors in Australia? Yes. It's outdoor-ready with a polycarbonate enclosure rated from −40°C to 65°C and 5–95% humidity, suiting sheltered outdoor and harsh Australian conditions. Do I need a controller to manage it? Yes. The USW-Flex is managed through the UniFi Network application running on a UniFi Cloud Gateway, Dream Machine, or Cloud Key — there are no per-device licence fees. Is the USW-Flex NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Flex is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX 5 GHz Sector — NDAA Compliant Ubiquiti airPRISM AP-5AC-90-HD — 5 GHz 3x30° High-Density Sector Antenna (AP-5AC-90-HD) The Ubiquiti airPRISM AP-5AC-90-HD is a 5 GHz high-density sector antenna that houses three Rocket5ac Prism radios to deliver three separate 30° beamwidth transmissions for 90° of total coverage. Engineered for point-to-multipoint deployments, its enhanced noise isolation and beam performance give clients a stronger signal with higher data rates on the less-congested 5 GHz band — ideal for dense WISP and enterprise wireless networks across Australia. Supplied with all mounting accessories and brackets, with genuine Ubiquiti stock and fast Australia-wide shipping. 3x30° = 90° HD Coverage Three independent 30° beamwidth sectors combine into 90° of high-density coverage, maximising client capacity in busy point-to-multipoint deployments. Houses Three Rocket5ac Prism Radios Mounts three Rocket5ac Prism radios in a single antenna, consolidating three sectors onto one tower position for cleaner, higher-density site layouts. Superior Noise Isolation Enhanced noise isolation and beam performance deliver a stronger, cleaner signal with higher data rates and reduced interference between sectors. All Mounting Hardware Included Ships with all mounting accessories and brackets, so it's ready to install on standard tower and mast hardware out of the box. Model AP-5AC-90-HD (airPRISM Sector) Frequency Band 5 GHz Coverage 3 x 30° sectors = 90° total Radios Supported Three Rocket5ac Prism radios Application High-density point-to-multipoint Mounting All mounting accessories & brackets included Compliance NDAA compliant AP-5AC-90-HD Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW-48 — 48-Port Managed Gigabit Switch with 4 SFP & Touch Display The Ubiquiti UniFi USW-48 is a fully managed 48-port Gigabit switch built for high-density networks that demand reliable, silent performance. With 48 GbE RJ45 ports, 4 dedicated 1G SFP fibre uplinks, and a fanless cooling design, it delivers enterprise-grade connectivity without the noise — ideal for offices, server rooms, retail sites, and large CCTV deployments anywhere in Australia. A built-in 1.3″ colour touchscreen and full integration with the UniFi Network application make managing your entire network effortless. Genuine Ubiquiti stock with fast Australia-wide shipping. Ports 48× GbE RJ45 Uplinks 4× 1G SFP Display 1.3″ Touchscreen Cooling Silent Fanless Why Choose the UniFi USW-48? 48 Gigabit Ports Connect up to 48 devices over Gigabit Ethernet RJ45 — perfect for high-density offices, IP camera networks, access points, and workstations all from a single 1U switch. 4× 1G SFP Fibre Uplinks Four dedicated 1G SFP ports give you flexible fibre or copper uplinks to your core network or other switches, supporting longer runs and high-speed backbones. Silent Fanless Cooling A completely fanless design means zero fan noise — ideal for offices, reception areas, retail spaces, and any location where a quiet switch matters. 1.3″ Colour Touch Display The built-in 1.3″ LCM colour touchscreen with AR switch management shows live status and port info at a glance — no laptop needed for quick checks. UniFi Network Managed Fully managed through the UniFi Network application (Version 7.2.94 and later) for a single-pane view of your entire network — VLANs, monitoring, and configuration in one place. NDAA Compliant Manufactured by US-based Ubiquiti and NDAA Section 889 compliant — suitable for government, defence, and security-sensitive installations where supply-chain integrity is required. Technical Specifications Model USW-48 Switching Layer Layer 2 managed RJ45 Ports 48× Gigabit Ethernet (GbE) SFP Ports 4× 1G SFP Display 1.3″ LCM colour touchscreen with AR switch management Cooling Fanless (silent) Management UniFi Network application (Version 7.2.94 and later) Compliance NDAA Section 889 compliant Downloads & Resources USW-48 Datasheet USW-48 Installation Guide Best For Offices & Workspaces High-density Gigabit connectivity for desks, phones, and access points — silent enough for the floor. CCTV & IP Camera Networks Aggregate dozens of cameras and recorders on one managed switch with VLAN segregation. Server & Comms Rooms Reliable 1U switching with SFP fibre uplinks to your core network backbone. Retail & Hospitality Centralised UniFi management across multiple sites with no monthly fees. Managed by the UniFi Network application (Version 7.2.94 or later) running on a UniFi console or self-hosted host. Use the 4× 1G SFP ports for fibre or copper uplinks to your core switch or gateway. Fanless design suits rack or shelf mounting in noise-sensitive environments. Note: the USW-48 is a non-PoE switch — use a PoE switch or injectors for powered devices. Frequently Asked Questions Does the USW-48 supply PoE? No. The USW-48 is a non-PoE Gigabit switch. For PoE devices such as cameras and access points, use a UniFi PoE switch or PoE injectors alongside it. How is the USW-48 managed? It is fully managed through the UniFi Network application (Version 7.2.94 and later), giving you a single-pane view of your network. The built-in touchscreen also shows live status. How many ports does it have? 48 Gigabit Ethernet RJ45 ports plus 4 dedicated 1G SFP ports for fibre or copper uplinks. Is it noisy? No. The USW-48 uses a completely fanless cooling design, so it runs silently — ideal for offices and other quiet spaces. Is the USW-48 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-48 is NDAA Section 889 compliant, suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Managed — NDAA Compliant Ubiquiti USW-Flex-Mini 5-Pack — UniFi Layer 2 Gigabit Switch (5x GbE, PoE / USB-C) The Ubiquiti USW-Flex-Mini is a fully managed, Layer 2 Gigabit switch with five GbE RJ45 ports in a compact, slim housing — and this value 5-pack is ideal for rolling out UniFi connectivity across desks, AV racks, IoT clusters, or small remote rooms. Each switch can be powered over PoE (802.3af, via Port 1) or with a USB-C adapter, and is monitored and configured anywhere through the UniFi Network app. Genuine Ubiquiti stock with fast Australia-wide shipping. Five Gigabit Ports (5) GbE RJ45 ports — including (1) 802.3af PoE input on Port 1 — in a slim, desk-friendly housing. Flexible Power Power each unit over PoE (802.3af) via Port 1, or with a USB-C 5V/1A adapter — no separate PSU run required. Fully Managed UniFi Monitor and configure from anywhere with the powerful, intuitive UniFi Network web and mobile app. NDAA Compliant Ubiquiti is a US-based manufacturer — NDAA Section 889 compliant for government and security-sensitive sites. Technical Specifications Model USW-Flex-Mini (5-Pack) Switch Type Fully managed, Layer 2 Network Ports (5) GbE RJ45, including (1) 802.3af PoE input (Port 1) Power Method PoE (802.3af) via Port 1, or USB-C 5V/1A adapter Management UniFi Network web application & mobile app Housing Compact, slim desktop housing Pack Quantity 5 × USW-Flex-Mini Power Adapter USB-C adapter included only with single-pack units (no PSU in this 5-pack) Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Switching — NDAA Compliant Ubiquiti UniFi USW Flex Mini (3-Pack) — Managed 5-Port Gigabit Switch (USW-Flex-Mini-3) The Ubiquiti UniFi USW Flex Mini is a fully managed, Layer 2 Gigabit switch in a palm-sized desktop housing — and this 3-pack (USW-Flex-Mini-3) is the cost-effective way to add managed connectivity to multiple rooms, desks, or AV racks at once. Each switch packs five Gigabit RJ45 ports (one accepting 802.3af/at PoE input) into a near-silent fanless body, and every unit is provisioned and monitored from the UniFi Network app and web interface. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it is ideal for expanding any UniFi network across homes, offices, and commercial sites anywhere in Australia. Ports 5x GbE RJ45 Power PoE or USB-C Switching 10 Gbps L2 Pack 3 Switches Why Choose the UniFi USW Flex Mini 3-Pack? Three Managed Switches, One Value Pack Get three USW Flex Mini switches in a single box — the economical way to extend Gigabit connectivity to multiple desks, rooms, or AV positions across a home, office, or commercial fit-out. Five Gigabit RJ45 Ports Each switch delivers 5x 10/100/1000 RJ45 ports, with Port 1 accepting 802.3af/at PoE input — turn a single uplink into five wired connections for printers, NAS, consoles, and computers. Flexible PoE or USB-C Power Power each unit over a single PoE cable (802.3af/at) or via a 5V/1A USB-C adapter — no dedicated power run required. Maximum draw is just 2.5 W per switch. Fully Managed Layer 2 Configure port-based VLANs, port isolation, port mirroring, storm control, jumbo frames, and rate limiting — all from the UniFi Network controller, with up to 1,000 VLANs supported. Compact, Silent Desktop Design At just 107 x 70 x 21 mm and 150 g, each fanless switch tucks discreetly behind a TV, on a desk, or inside a cabinet — silent operation with no moving parts. UniFi Network — One Interface Provision, monitor, and manage all three switches alongside your other UniFi gear through the UniFi Network app and web interface — single-pane-of-glass control with no per-device fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model USW-Flex-Mini (3-Pack: USW-Flex-Mini-3) Switch Type Fully managed, Layer 2 Ports (5) 10/100/1000 GbE RJ45 • Port 1 supports 802.3af/at PoE input Switching Capacity 10 Gbps Non-Blocking Throughput 5 Gbps Forwarding Rate 7.44 Mpps Supported VLANs 1,000 (port-based) MAC Address Table 2,000 Layer 2 Features Port isolation, port mirroring, storm control, flow control, egress rate limit, multicast/broadcast rate limiting, jumbo frames Power Method USB Type-C (5V, 1A) or 802.3af/at PoE (44–57 V DC) Max Power Consumption 2.5 W per switch Management UniFi Network (Ethernet in-band) Enclosure Polycarbonate Dimensions 107 × 70 × 21 mm Weight 150 g per switch ESD/EMP Protection Air: ±16 kV • Contact: ±12 kV Operating Temperature −5°C to 45°C Operating Humidity 10–90% non-condensing Software Requirement UniFi Network 5.12.5 and later Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Flex-Mini Tech Specs Ubiquiti Installation Guide What's in the Box 3x UniFi USW Flex Mini Switch Three fully managed 5-port Gigabit switches (USW-Flex-Mini). Mounting Hardware Wall-mount accessories and screws included per switch. Quick Start Guide Installation and setup documentation. No USB-C Adapter The 5V/1A USB-C power adapter is included only with the single-pack. In this 3-pack, power each switch via 802.3af/at PoE (adapters sold separately). Best For Homes & Home Offices Add wired ports for consoles, smart TVs, NAS, and PCs in multiple rooms without running new power. Desks & Workstations Drop a managed switch at each desk to fan one cable out to phone, PC, and dock. AV & Meeting Rooms Discreet PoE-powered switching behind displays, projectors, and conferencing kit. UniFi Network Expansion Extend an existing UniFi deployment to three new locations with single-pane management. Adopt and manage each switch through the UniFi Network app or web interface (UniFi Network 5.12.5+). Power each unit via 802.3af/at PoE on Port 1, or a 5V/1A USB-C adapter (not included in the 3-pack). Uses port-based VLANs; does not support SSH, STP forwarding control, or 802.1X. Best paired with a UniFi gateway or PoE switch for end-to-end UniFi management. Frequently Asked Questions How many switches come in this pack? Three. The USW-Flex-Mini-3 includes three individual USW Flex Mini managed 5-port Gigabit switches. Does the 3-pack include USB-C power adapters? No. The 5V/1A USB-C adapter ships only with the single-pack. In this 3-pack, power each switch via 802.3af/at PoE, or buy USB-C adapters separately. Is the USW Flex Mini a managed switch? Yes. It is a fully managed Layer 2 switch with port-based VLANs, port isolation, mirroring, storm control, and jumbo frames, all configured in UniFi Network. Does it provide PoE output to other devices? No. Port 1 accepts PoE input to power the switch itself. The Flex Mini does not output PoE to connected devices. Do I need a UniFi controller? To manage features you run UniFi Network on a UniFi gateway, Cloud Key, or hosted controller. The switch will pass traffic unmanaged but needs the controller for configuration. Is the USW Flex Mini NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW Flex Mini is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi SmartPower — NDAA Compliant Ubiquiti UniFi SmartPower Redundant Power System — 950W DC, 1U Rackmount (USP-RPS) The UniFi® SmartPower Redundant Power System (USP-RPS) is a proprietary redundant power supply that protects up to six UniFi SmartPower-supported devices from sudden power-supply-module failure. It continually monitors every attached device, and if an internal AC/DC power supply fails, failover is automatic — so your network keeps running with no interruption in service. With a 950W DC power budget it can back up a range of high-power gear, including UniFi PoE switches, and an integrated 1.3″ colour touchscreen displays live system information. Genuine Ubiquiti stock with fast Australia-wide shipping. Power Budget 950W DC Protected Devices Up to 6 Display 1.3″ Touchscreen Form Factor 1U Rackmount Why Choose the UniFi USP-RPS? Automatic, Hitless Failover The USP-RPS continually monitors every attached device. If an internal AC/DC power supply fails, failover is automatic — your network keeps operating with no interruption in service. 950W DC Power Budget A generous 950W DC budget backs up a variety of high-power UniFi gear, including UniFi PoE switches, across up to six connected devices. Protects Up to 6 Devices Six dedicated USP DC output ports let a single 1U unit safeguard an entire rack of UniFi SmartPower-supported equipment. 1.3″ Colour Touchscreen An integrated 1.3″ colour touchscreen LCM displays live system information at a glance for convenient on-site monitoring. Clean 1U Rackmount Design Ships with a 1U rackmount kit for tidy integration into standard 19″ network and server racks. UniFi Network Managed Managed directly through the UniFi Network Controller (v5.12.11 or later) alongside the rest of your UniFi infrastructure. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model USP-RPS Type UniFi SmartPower Redundant Power System Power Budget 950W DC Protected Devices Up to 6 UniFi SmartPower-supported devices DC Output Ports (6) USP DC output ports Network Interface (1) Ethernet port Display 1.3″ colour touchscreen LCM with status information Failover Automatic on internal AC/DC power-supply failure Form Factor 1U rackmountable (rackmount kit included) Management UniFi Network Controller v5.12.11 or later Compliance NDAA compliant Downloads & Resources USP-RPS Datasheet Ubiquiti Quick Start Guide What's in the Box UniFi USP-RPS Unit UniFi SmartPower Redundant Power System (USP-RPS). 1U Rackmount Kit Mounting hardware for standard 19″ racks. Documentation Quick-start guide and installation instructions. Not Included USP DC power cables and supported UniFi devices are sold separately. Best For Mission-Critical Racks Keep core UniFi switching and infrastructure online through power-supply failures. UniFi PoE Deployments Back up high-power UniFi PoE switches feeding cameras, APs, and phones. SMB & Enterprise Add redundancy to up to six devices from a single tidy 1U unit. Remote Sites On-unit touchscreen and UniFi Network management simplify monitoring. Mounts in any standard 19″ rack using the included 1U rackmount kit. Connect supported UniFi SmartPower devices to the six USP DC output ports. Adopt and manage through UniFi Network Controller v5.12.11 or later. Monitor live system status directly on the 1.3″ colour touchscreen. Frequently Asked Questions How many devices can the USP-RPS protect? Up to six UniFi SmartPower-supported devices via its six USP DC output ports. What is the power budget? 950W DC, enough to back up a range of high-power UniFi gear including UniFi PoE switches. How does failover work? The USP-RPS continually monitors attached devices and switches over automatically if an internal AC/DC power supply fails, with no service interruption. How is it managed? Through the UniFi Network Controller (version 5.12.11 or later), plus the on-unit 1.3″ colour touchscreen for local status. Does it fit a standard rack? Yes. It is 1U rackmountable and ships with the rackmount kit for any standard 19″ rack. Is the USP-RPS NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USP-RPS is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine UniFi — NDAA Compliant UniFi Patch Cable 3m Black — Cat6 RJ45 Ethernet, Ultra-Thin 3mm (U-Cable-Patch-3M-RJ45-BK) The UniFi Patch Cable 3m (U-Cable-Patch-3M-RJ45-BK) is a genuine Ubiquiti ultra-thin Cat6 patch lead in black, with a slim 3 mm jacket and bendable booted RJ45 connectors at both ends for clean, tidy runs in racks, wall plates, and tight installs. Supporting Gigabit Ethernet and up to PoE+++, it’s the ideal patch lead for connecting UniFi switches, access points, and cameras — with genuine Ubiquiti stock and fast shipping Australia-wide. Ultra-Thin 3mm Jacket A slim 3 mm TPE jacket with a minimum 24 mm bend radius keeps cabling neat and flexible in dense patch panels and tight spaces. Bendable Booted RJ45 Both ends feature bendable booted RJ45 connectors that flex to suit your install while protecting the latch and conductors. Gigabit + PoE+++ Ready Supports Gigabit Ethernet data rates and up to PoE+++, powering and connecting UniFi switches, APs, and cameras over a single lead. Cat6 Certified Built to TIA/EIA-568-B.2 and ISO/IEC 11801 standards with 30 AWG stranded copper conductors for reliable performance. Technical Specifications Model U-Cable-Patch-3M-RJ45-BK Length 3 m Colour Black Supported Data Rate GbE (Gigabit Ethernet) Supported PoE Up to PoE+++ Connectors (2) Bendable booted RJ45 Jacket Diameter 3 mm (0.1″) Jacket Material Thermoplastic elastomer (TPE) Shielding UTP Conductor Stranded copper, 30 AWG Bend Radius Min. 24 mm (0.94″) Operating Environment Indoor Flame Rating FT-2 (UL1581) Standards TIA/EIA-568-B.2, ISO/IEC 11801 Operating Temperature −10°C to 75°C Compliance NDAA compliant Downloads & Resources UniFi Patch Cable Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi OS Console — NDAA Compliant Ubiquiti UDM-Pro — All-in-One UniFi OS Gateway, Network Controller & UniFi Protect NVR The UniFi Dream Machine Pro (UDM-Pro) is Ubiquiti's flagship all-in-one UniFi OS Console — combining an enterprise-grade security gateway, the UniFi Network controller, a UniFi Protect NVR, and a threat-management engine in a single 1U rack-mount device. Driven by a fast 1.7 GHz quad-core processor, with 8 × Gigabit RJ45 LAN, dual 10G SFP+ (WAN + LAN), and a 3.5″ HDD bay for local camera recordings, the UDM-Pro is the ideal foundation for professional home, office, and small-business networks across Australia — with genuine Ubiquiti stock and fast Australia-wide shipping. LAN Ports 8 × GbE + 10G WAN GbE + 10G SFP+ NVR Storage 3.5″ HDD Bay Threat Mgmt 3.5 Gbps IDS/IPS Why Choose the UniFi Dream Machine Pro? All-in-One UniFi OS Console Runs the complete UniFi application suite — UniFi Network, UniFi Protect, and more — from a single device. Eliminates the need for separate controllers, gateways, and NVR hardware. Enterprise Security Gateway A full security gateway with advanced threat management, IDS/IPS (up to 3.5 Gbps), traffic identification, and deep packet inspection — protecting your network at speed. 8 × Gigabit LAN + 10G SFP+ LAN Nine LAN ports including eight Gigabit RJ45 and one 10G SFP+ — enough to connect switches, APs, and devices directly without extra hardware for smaller deployments. Dual WAN — GbE + 10G SFP+ One Gigabit RJ45 WAN and one 10G SFP+ WAN port support dual-WAN failover and load balancing — keeping your network online even if one ISP connection drops. Built-in UniFi Protect NVR The 3.5″ HDD bay enables local UniFi Protect camera recordings directly on the UDM-Pro — no separate NVR required for smaller camera deployments. UniFi Network Controller Pre-Installed Manage your entire UniFi network — switches, access points, and clients — through the built-in UniFi Network application. No separate cloud key or controller hardware needed. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your network and cameras running during power events. NDAA Compliant Fully NDAA Section 889 compliant — suitable for government, defence, and security-sensitive Australian installations where supply-chain integrity is required. Ideal Use Cases Small to Medium Business Replace multiple separate devices — gateway, controller, NVR — with a single UDM-Pro. Ideal for offices, retail stores, and professional services firms. Advanced Home Networks Power users and home-lab enthusiasts who want enterprise-grade routing, threat management, and UniFi Protect camera recording in one clean rack-mount unit. UniFi Protect Camera Systems The UDM-Pro doubles as a UniFi Protect NVR — connect UniFi cameras and record locally without a separate UNVR. Multi-WAN & Failover Deployments Businesses requiring dual-WAN failover or load balancing across fibre and 4G/5G connections for maximum uptime. Technical Specifications Model UDM-Pro Form Factor 1U rack-mount Processor 1.7 GHz quad-core System Memory 4 GB LAN Ports 8 × Gigabit RJ45 • 1 × 10G SFP+ WAN Ports 1 × Gigabit RJ45 • 1 × 10G SFP+ IDS/IPS Throughput Up to 3.5 Gbps HDD Bay 1 × 3.5″ SATA (for UniFi Protect, drive not included) UniFi Applications UniFi Network • UniFi Protect • UniFi OS Threat Management IDS/IPS, traffic identification, deep packet inspection Power Redundancy USP-RPS compatible (sold separately) Management UniFi OS • UniFi app (iOS/Android) • Web UI Display 1.3″ touchscreen Compliance NDAA compliant What's in the Box UDM-Pro Unit All-in-one UniFi OS Console with pre-installed UniFi Network and UniFi Protect. Rack-Mount Hardware Rack-mount brackets, screws, and power cord included. Quick-Start Guide Installation guide and documentation included. Not Included 3.5″ HDD for UniFi Protect storage and cameras are sold separately. Frequently Asked Questions Does the UDM-Pro require a UniFi subscription? No. UniFi Network and UniFi Protect run fully locally on the UDM-Pro. There are no monthly fees or cloud subscriptions required for full functionality. Can the UDM-Pro run UniFi Protect for cameras? Yes. Install a 3.5″ HDD in the built-in bay and the UDM-Pro acts as a UniFi Protect NVR — supporting UniFi cameras for local recording and AI detection. What is the difference between the UDM-Pro and UDM-SE? The UDM-SE adds 8 × built-in PoE ports (allowing direct camera and AP power), a 2.5 GbE RJ45 WAN port, and an internal M.2 storage option. The UDM-Pro has no built-in PoE but offers dual 10G SFP+ and is well suited to pure routing/gateway and NVR deployments. Does it support dual-WAN failover? Yes. The UDM-Pro supports dual-WAN failover and load balancing across the Gigabit RJ45 WAN and 10G SFP+ WAN ports. What hard drive do I need for UniFi Protect? Any compatible 3.5″ SATA HDD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple or Seagate SkyHawk) for 24/7 recording reliability. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Is the UDM-Pro NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the UDM-Pro is NDAA Section 889 compliant — suitable for government and security-sensitive Australian sites. Downloads & Resources UDM-Pro Tech Specs Quick Start Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti 5 GHz NanoStation ac Radio5 GHz airMAX® ac RadioModels: NS-5AC, NS-5ACLUbiquiti® airMAX ac ProcessorUp to 450+ Mbps Real TCP/IP ThroughputDedicated Wi-Fi Radio for ManagementOverviewUbiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with theNanoStation® M.The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, alongwith integrated airMAX (MIMO TDMA protocol) technology and dedicatedWi-Fi management.The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy.SoftwareairOS® 8 is the revolutionary operatingsystem for Ubiquiti airMAX acproducts.Powerful Wireless Features:• Access Point PtMP airMAX MixedMode• airMAX ac Protocol Support• Long-Range Point-to-Point (PtP)Link Mode• Selectable Channel Width• PtP: 10/20/30/40/50/60/80 MHz• PtMP: 10/20/30/40 MHz• Automatic Channel Selection• Transmit Power Control:Automatic/Manual• Automatic Distance Selection(ACK Timing)• Strongest WPA2 SecurityUsability Enhancements:• airMagic® Channel Selection Tool• Dynamic Configuration Changes• Instant Input Validation• HTML5 Technology• Optimization for Mobile Devices• Detailed Device Statistics• Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView® Spectrum AnalyzerSpecifications:DimensionsWith MountWithout Mount257 x 84 x 30 mm (10.12 x 3.31 x 1.18")257 x 84 x 41 mm (10.12 x 3.31 x 1.61")Weight 233 g (8.22) ozPower Supply 24V, 0.5A Gigabit PoE Supply (Included)Max. Power Consumption 8.5WPower Method 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return)24V Passive PoE

Read more less

airMAX ac CPE — NDAA Compliant Ubiquiti NanoStation 5AC Loco — 5 GHz airMAX ac Outdoor CPE / PtP Bridge (Loco5AC) The Ubiquiti NanoStation 5AC Loco (Loco5AC) is a compact 5 GHz airMAX® ac outdoor CPE built for point-to-point bridges and point-to-multipoint client links. Its 13 dBi integrated antenna, dedicated 2.4 GHz management radio, and U-Mobile app setup make it a fast, low-cost way to extend a network across a property, between buildings, or out to a remote site. Fully NDAA compliant and backed by genuine Ubiquiti stock with fast Australia-wide shipping. Note: a 24V PoE injector is not included. airMAX ac Performance Proprietary airMAX® ac chipset with TDMA scheduling delivers high throughput and low latency for reliable long-distance wireless links across Australia. 13 dBi Integrated Antenna A built-in dual-linear 13 dBi antenna with 45° beamwidth focuses signal for a clean, directional link in a small, easy-to-mount enclosure. Management Wi-Fi & U-Mobile App A dedicated 2.4 GHz management radio lets you configure and aim the unit from your phone via the U-Mobile app and the airOS® 8 web interface. NDAA Compliant NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model Loco5AC (airMAX NanoStation 5AC Loco) Operating Frequency 5150–5875 MHz (worldwide) Management Radio 2.4 GHz (2412–2472 MHz) Antenna Gain 13 dBi, dual-linear polarisation Beamwidth 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Channel Bandwidths 10 / 20 / 30 / 40 / 50 / 60 / 80 MHz Cross-Pol Isolation 20 dB min. Max. VSWR 1.8:1 Networking Interface (1) GbE RJ45 port Power Method Passive PoE 2-pair (4, 5+; 7, 8 return) Power Supply 24V, 0.3A gigabit PoE (not included) Supported Voltage Range 22–27 V DC Max. Power Consumption 7 W LEDs Power, Ethernet, (4) signal strength Dimensions 179 × 77.5 × 59.1 mm Weight 180 g Enclosure UV-stabilised plastic Mounting Pole mounting kit (included) Operating Temperature −40°C to 70°C, 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources Loco5AC Datasheet Loco5AC Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX ac — NDAA Compliant Ubiquiti PowerBeam AC Gen2 ISO — 5 GHz airMAX Bridge, 25 dBi, 400 mm (PBE-5AC-ISO-Gen2) The Ubiquiti PowerBeam AC Gen2 ISO (PBE-5AC-ISO-Gen2) is a high-performance 5 GHz airMAX® ac bridge built for long-range point-to-point and point-to-multipoint wireless links. Featuring a 400 mm dish with 25 dBi gain and an integrated radio isolator (ISO) horn that shields the antenna feed from off-axis noise, it delivers fast, stable throughput even in congested RF environments. Whether you're linking buildings, connecting a remote site, or extending a network across a property anywhere in Australia, the PowerBeam AC Gen2 ISO is enterprise-grade airMAX hardware with genuine Ubiquiti stock and fast Australia-wide shipping. Frequency 5 GHz airMAX ac Antenna Gain 25 dBi Interface Gigabit Ethernet Power Passive PoE (Included) Why Choose the PowerBeam AC Gen2 ISO? airMAX ac Custom Silicon Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability, providing hardware acceleration to the airMAX scheduler for the high data rates and dense modulation of airMAX ac technology. 25 dBi 400 mm Dish The powder-coated SPCC dish reflector and UV-stabilised feed deliver 25 dBi of gain for reliable long-distance links, with a focused beam that maximises range and signal stability. Integrated ISO Isolation The integrated radio isolator (ISO) horn shields the antenna feed from off-axis interference and noise, improving performance in noisy, co-located, and high-density deployments. Gigabit Connectivity A single 10/100/1000 Ethernet port carries both data and power, while front-panel LEDs give at-a-glance power, link, and 4-segment signal-strength feedback for easy alignment. Flexible Channel Widths Supports PtP channels of 10/20/30/40/50/60/80 MHz and PtMP channels of 10/20/30/40 MHz, letting you tune bandwidth and spectrum use to each link. Simple PoE Deployment Ships with a 24V, 0.5A Gigabit PoE adapter and pole-mount kit. Just 8.5 W max consumption keeps running costs and power runs minimal at remote sites. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive networks where supply-chain integrity is a requirement. Technical Specifications Model PBE-5AC-ISO-Gen2 Frequency 5 GHz — airMAX® ac Antenna Gain 25 dBi Processor MIPS 74Kc Memory 64 MB Networking Interface (1) 10/100/1000 Ethernet Port LEDs Power, Ethernet, (4) Signal Strength Channel Sizes (PtP) 10 / 20 / 30 / 40 / 50 / 60 / 80 MHz Channel Sizes (PtMP) 10 / 20 / 30 / 40 MHz Power Supply 24V, 0.5A Gigabit PoE Adapter (Included) Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Supported Voltage Range 20 to 26 VDC Max. Power Consumption 8.5 W Enclosure — Antenna Feed Outdoor UV-Stabilized Plastic Enclosure — Dish Reflector Powder-Coated SPCC Mounting Pole-Mounting Kit (Included) Dimensions 459 × 459 × 261 mm (18.07 × 18.07 × 10.28″) Weight (Mount Included) 3.22 kg (7.10 lbs) Compliance NDAA compliant Downloads & Resources PBE-5AC-ISO-Gen2 Datasheet Ubiquiti Quick Start Guide What's in the Box PowerBeam AC Gen2 ISO Radio PBE-5AC-ISO-Gen2 with 400 mm 25 dBi dish and integrated ISO isolator horn. Gigabit PoE Adapter 24V, 0.5A Gigabit PoE power adapter included. Pole-Mount Kit Mounting hardware for pole installation included. Not Included Outdoor Ethernet cable and a second radio (for a complete link) are sold separately. Best For Building-to-Building Links Bridge two sites with a stable, high-throughput 5 GHz airMAX ac connection. Remote Sites & Cameras Backhaul CCTV and network traffic from sheds, gates, and outbuildings with no trenching. Rural & Acreage Extend internet and network across large Australian properties where cabling isn't practical. WISP & PtMP Deploy as a CPE in point-to-multipoint networks with flexible channel widths. Deploy in pairs for a point-to-point link, or as a CPE against an airMAX ac base station for PtMP. Powered by the included 24V Gigabit PoE adapter — no separate power supply required at the radio. Mounts to a pole using the included kit; align using the 4-segment signal-strength LEDs. Configured through Ubiquiti airOS® for channel width, output power, and link tuning. Frequently Asked Questions How many PowerBeam units do I need for a link? A point-to-point link needs two radios — one at each end. For point-to-multipoint, each remote site uses one PowerBeam as a CPE talking to a central base station. What does the ISO version add? The ISO model includes an integrated radio isolator horn that shields the antenna feed from off-axis interference, improving performance in noisy and co-located RF environments. Is a power supply included? Yes. A 24V, 0.5A Gigabit PoE adapter and pole-mount kit are included in the box. You'll need to supply outdoor-rated Ethernet cable. What gain does the antenna provide? The 400 mm dish provides 25 dBi of gain, suited to medium and long-range 5 GHz airMAX ac links. Is the PowerBeam AC Gen2 ISO NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and this radio is NDAA Section 889 compliant — suitable for government and security-sensitive networks. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UISP — NDAA Compliant Ubiquiti IsoStation 5AC — 5 GHz airMAX ac Radio with Interchangeable Horn Antennas (IS-5AC) The Ubiquiti IsoStation 5AC (IS-5AC) is a 5 GHz airMAX® ac radio built for high-performance point-to-point and point-to-multipoint wireless links, delivering up to 450+ Mbps real TCP/IP throughput. Its modular, interchangeable horn antennas let you shape the beam precisely for your deployment, while a shielded all-metal radio base and a built-in management Wi-Fi radio make installation and co-location simple. Ideal for WISPs, rural connectivity, and site-to-site bridging across Australia — genuine Ubiquiti stock with fast Australia-wide shipping. Throughput 450+ Mbps Band 5 GHz airMAX ac Antennas 30/45/60/90° Horns Setup Management Wi-Fi Why Choose the Ubiquiti IsoStation 5AC? 450+ Mbps airMAX ac Throughput Powered by Ubiquiti's airMAX® ac technology, the IS-5AC supports up to 450+ Mbps real TCP/IP throughput — plenty of bandwidth for backhaul, CPE, and multipoint distribution links. Interchangeable Horn Antennas The horn antenna is fully interchangeable for precise beam-shaping. Choose 30°, 45°, 60°, or 90° horns to match your deployment — the IsoStation gets maximum gain out of the smallest footprint. Optimised for Co-Location Asymmetrical 60° and 90° horns have naturally attenuated side lobes and extremely low back radiation, delivering industry-leading front-to-back ratio. Symmetrical 30° and 45° horns suit dense cluster-sector installs. Improved Noise Immunity The IsoStation blocks or spatially filters out noise, dramatically improving noise immunity — especially valuable in crowded RF environments with many signals on the same or similar frequency. Built-In Management Wi-Fi Radio A separate, integrated management Wi-Fi radio lets you set up and configure the IsoStation fast and easily straight from your mobile device — no extra cabling or tools required. All-Metal Shielded Build An all-metal, shielded radio base with a metal strap for quick pole-mounting makes the IS-5AC fast to install and rugged enough for demanding outdoor wireless sites. High MAC Efficiency High MAC efficiency delivers approximately ±80% PHY rate throughput, so you get more usable bandwidth out of every link. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model IS-5AC (IsoStation 5AC) Technology airMAX® ac Operating Frequency 5 GHz Throughput Up to 450+ Mbps real TCP/IP Included Antenna 45° isolation horn antenna Optional Antennas Interchangeable 30°, 60°, and 90° horns (sold separately) Management Built-in management Wi-Fi radio for mobile setup Antenna Release Single-button release for quick antenna swaps Construction All-metal, shielded radio base Mounting Metal strap for quick pole-mounting MAC Efficiency High — approx. ±80% PHY rate throughput Noise Immunity Improved — blocks / spatially filters out RF noise Compliance NDAA Section 889 compliant Downloads & Resources IS-5AC Datasheet Ubiquiti Tech Specs Best For WISP Backhaul High-throughput 5 GHz airMAX ac links for wireless ISPs and rural network operators across Australia. Sector / Cluster Sites Symmetrical 30° and 45° horns suit dense cluster-sector deployments with high co-location demands. Point-to-Multipoint Asymmetrical 60° and 90° horns shape coverage for multipoint distribution to client devices. Noisy RF Environments Improved noise immunity keeps links reliable in busy, signal-crowded urban and industrial areas. Ships with a 45° isolation horn antenna; optional 30°, 60°, and 90° horns available for custom beam-shaping. Single-button antenna release makes swapping horns quick and tool-free. Metal pole-mount strap allows fast installation on standard masts and poles. Use the built-in management Wi-Fi radio to configure the unit from your phone during setup. Frequently Asked Questions What throughput does the IsoStation 5AC deliver? Using airMAX ac technology, the IS-5AC supports up to 450+ Mbps of real TCP/IP throughput on the 5 GHz band. Which antenna is included? The IsoStation 5AC ships with a 45° isolation horn antenna. Optional 30°, 60°, and 90° horns are available separately for specific beam-shaping needs. How do I set it up? The IsoStation integrates a separate management Wi-Fi radio, so you can connect and configure it quickly and easily straight from your mobile device. What's the difference between the horn antenna angles? Symmetrical 30° and 45° horns are ideal for cluster-sector installs with high co-location requirements; asymmetrical 60° and 90° horns narrow the elevation pattern to boost gain where it's needed. Is the IsoStation 5AC NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the IS-5AC is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Protect — NDAA Compliant UniFi Protect ViewPort PoE HDMI Adapter (UFP-VIEWPORT) The UniFi Protect ViewPort (UFP-VIEWPORT) turns any HDMI display or TV into a live UniFi Protect video wall. Powered over a single PoE Ethernet cable, it connects to the local network hosting your UniFi Protect cameras and outputs up to 4K @ 30 FPS over HDMI — displaying up to 16 camera feeds simultaneously in custom high-density matrix layouts. It's the easiest way to put a permanent, always-on monitoring screen in a reception, control room, or back office anywhere in Australia, with genuine Ubiquiti stock and fast Australia-wide shipping. 4K HDMI Output Drives any HDMI display or TV at up to 4K @ 30 FPS for a crisp, full-resolution live view of your UniFi Protect cameras. Up to 16 Cameras at Once Show up to 16 IP camera feeds simultaneously in custom high-density matrix configurations — perfect for a dedicated video wall. Single-Cable PoE Both power and data arrive over one Ethernet run (PoE, up to 1 Gbps) — no separate power supply and no electrician required. Easy UniFi Protect Setup Plug-and-play integration with your existing UniFi Protect system — no extra software, no monthly fees, full local control. Technical Specifications Model UFP-VIEWPORT Function UniFi Protect ViewPort — PoE-to-HDMI video adapter Video Output HDMI, up to 4K @ 30 FPS Cameras Displayed Up to 16 IP cameras simultaneously, custom matrix layouts Network Interface RJ45, up to 1 Gbps Power Method PoE (Power over Ethernet) Software UniFi Protect (web & mobile app) Compliance NDAA compliant Downloads & Resources UFP-VIEWPORT Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti UISP — NDAA Compliant Ubiquiti airCube ISP Wi-Fi Access Point (ACB-ISP) — 802.11n, 24V PoE Passthrough The Ubiquiti airCube ISP (ACB-ISP) is a compact 802.11n indoor Wi-Fi access point built for ISP and home deployments. Its 2x2 MIMO radio delivers up to 300 Mbps on the 2.4 GHz band, while a built-in super antenna spreads wide-area coverage across the home or small office. With four 10/100 Fast Ethernet ports and controllable 24V PoE passthrough on the WAN port, it pairs perfectly with airMAX CPE so you can power and connect an outdoor antenna over a single cable. Genuine Ubiquiti stock with fast Australia-wide shipping. 802.11n 2x2 MIMO — up to 300 Mbps Dual-stream 2.4 GHz Wi-Fi delivers up to 300 Mbps with 22 dBm max TX power and 4 dBi antenna gain for reliable wide-area coverage. 24V PoE Passthrough for airMAX CPE Controllable 24V PoE out on the WAN port powers and connects an airMAX CPE over a single Ethernet run — ideal for ISP and fixed-wireless installs. 4x 10/100 Fast Ethernet Four 10/100 RJ45 ports connect local devices, with ±24 kV ESD/EMP protection on the interface for added resilience. Flexible Power & Easy Setup Powered by 24V passive PoE on LAN port 1 or a 2A micro-USB adapter (not included). Manage over Wi-Fi or Ethernet with simple status LEDs. Model airCube ISP (ACB-ISP) Wi-Fi Standard 802.11n, 2x2 MIMO Band 2.4 GHz Max Speed Up to 300 Mbps Max TX Power 22 dBm Antenna Gain 4 dBi Networking Interface (4) 10/100 Fast Ethernet ports PoE Out Controllable 24V PoE out (+4, 5; -7, 8) on WAN port Power Method 24V passive PoE on LAN port 1, or 2A micro-USB adapter (not included) Supported Power Voltage 4.95–5.05V Max Power Consumption 5 W Management Interface Wi-Fi / Ethernet ESD/EMP Protection ±24 kV RJ45 interface Enclosure Black plastic Dimensions 87.80 × 89.50 × 89.25 mm Weight 215 g Operating Temperature −10°C to 50°C Operating Humidity 5–95% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airFiber X Antenna — NDAA Compliant Ubiquiti airFiber X 5 GHz 34 dBi Dish Antenna — Slant 45° (AF-5G34-S45) The Ubiquiti airFiber X AF-5G34-S45 is a high-gain 5 GHz dish antenna purpose-built for long-range point-to-point links with airFiber radios. Its Slant 45° signal angle helps avoid interference in dense RF environments, while a rugged outdoor design delivers 34 dBi of gain across the 5.10–5.90 GHz range. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, it's an ideal upgrade for wireless backhaul links anywhere in Australia. Model AF-5G34-S45 (airFiber X Dish Antenna) Frequency Range 5.10–5.90 GHz Gain 34 dBi Polarization Slant 45° (interference avoidance) Dimensions 1050 × 1050 × 421 mm (41.34 × 41.34 × 16.57″) Weight 13.5 kg (29.76 lb) Construction Robust outdoor-rated design Compatibility Seamless integration with airFiber X radios Included Universal Pole Mount, airFiber X Radio Bracket, Weatherproof RF Connectors Compliance NDAA compliant High 34 dBi Gain Delivers the power needed for robust, long-range point-to-point links across the full 5.10–5.90 GHz band. Slant 45° for Interference Avoidance The slant 45° signal angle optimises performance and minimises co-channel interference in busy RF environments. Built for Outdoors Rugged construction stands up to harsh Australian conditions for reliable, year-round wireless backhaul. Mount Included Ships with a Universal Pole Mount, airFiber X Radio Bracket, and weatherproof RF connectors for a seamless install. AF-5G34-S45 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti airMAX — NDAA Compliant Ubiquiti airMAX 2.4 GHz Sector Antenna — 90° 16 dBi (AM-2G16-90) The Ubiquiti airMAX AM-2G16-90 is a carrier-class 2.4 GHz sector antenna delivering 16 dBi of gain across a 90° coverage sector — purpose-built to pair with a Ubiquiti Rocket airMAX base station for point-to-multipoint (PtMP) wireless links. With advanced RF isolation for superior noise immunity and a complete set of mounting accessories and brackets included, it is ready to deploy on towers, rooftops, and masts across Australia. Genuine Ubiquiti stock with fast AU-wide shipping. 90° Sector Coverage A 90° sector beamwidth concentrates signal where you need it, making it ideal for PtMP base-station deployments serving multiple subscriber stations. 16 dBi High Gain 16 dBi of gain on the 2.4 GHz band extends range and improves link reliability for wireless ISP and bridging applications. Rocket-Ready Design Designed to mate directly with a Ubiquiti airMAX Rocket radio for a clean, integrated base-station build with proven airMAX performance. All Brackets Included Ships with the full mounting kit and brackets, so it is ready to install on a mast or pole straight out of the box. Model AM-2G16-90 Frequency Band 2.4 GHz (airMAX) Gain 16 dBi Sector Coverage 90° Antenna Type Sector (point-to-multipoint) Pairs With Ubiquiti airMAX Rocket base station Mounting Pole / mast — all brackets & accessories included Compliance NDAA compliant AM-2G16-90 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX Sector — NDAA Compliant Ubiquiti AM-5G19-120 airMAX Sector Antenna — 5 GHz 19 dBi 120° (AM-5G19-120) The Ubiquiti AM-5G19-120 airMAX Sector Antenna is a carrier-class 5 GHz point-to-multipoint (PtMP) base-station antenna delivering 19 dBi gain across a wide 120° sector over the 4.9–5.9 GHz band. Purpose-built to pair with Ubiquiti Rocket airMAX radios, it features advanced RF isolation for clean co-location of multiple sectors on a single tower, and ships with all mounting accessories and brackets included. Genuine Ubiquiti stock with fast shipping right across Australia. 19 dBi High-Gain Sector Strong, focused 5 GHz coverage for reliable PtMP links to airMAX client devices across a wide service area. 120° Wide Coverage A 120° horizontal sector lets you cover a large arc with a single antenna — combine three for full 360° tower coverage. Advanced RF Isolation Carrier-class design improves noise immunity and co-location, allowing multiple sectors to operate together on the same tower. All Mounts Included Ships complete with mounting accessories and brackets — pairs with Ubiquiti Rocket airMAX radios for a fast PtMP deployment. Technical Specifications Model AM-5G19-120 Type airMAX Sector Antenna (PtMP base station) Frequency Range 4.9 – 5.9 GHz Gain 19 dBi Sector Coverage 120° Compatibility Ubiquiti Rocket airMAX radios Mounting All mounting accessories & brackets included Compliance NDAA compliant Downloads & Resources AM-5G19-120 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Accessory — NDAA Compliant Ubiquiti UMA-D UniFi AC Mesh Dual-Band Directional Antenna The Ubiquiti UMA-D is a high-efficiency, dual-band directional mesh antenna designed to extend the range and shape the coverage of the UniFi AC Mesh access point (UAP-AC-M). Optimised for 802.11ac, it delivers 15 dBi gain on 5 GHz and 10 dBi on 2.4 GHz with dual-linear polarisation, housed in an outdoor UV-stabilised enclosure for indoor or outdoor use. A ball-joint mount allows precise aiming on a pole or wall. Genuine Ubiquiti stock with fast Australia-wide shipping. High Directional Gain 15 dBi at 5 GHz and 10 dBi at 2.4 GHz focuses signal where you need it, boosting range and link reliability for your UAP-AC-M. Dual-Band Coverage Shaping Supports 2.4–2.5 GHz and 5.1–5.9 GHz with a 45° (5 GHz) / 90° (2.4 GHz) beamwidth for customised pattern shaping. Weather-Resistant Build Encased in outdoor UV-stabilised plastic, the UMA-D is rated for indoor and outdoor installation in tough Australian conditions. Precise Ball-Joint Mounting The integrated ball-joint mount enables accurate pole or wall aiming, with two RP-SMA connectors for the UAP-AC-M. Technical Specifications Model UMA-D Compatibility UniFi AC Mesh AP (UAP-AC-M) Supported Frequency 2.4–2.5 GHz • 5.1–5.9 GHz Gain 15 dBi (5 GHz) • 10 dBi (2.4 GHz) Beamwidth (HPOL / VPOL / Elevation) 45° (5 GHz) • 90° (2.4 GHz) Polarisation Dual-linear Max VSWR 2:1 Cross-Pol Isolation 30 dB (5 GHz) • 25 dB (2.4 GHz) RF Connections (2) RP-SMA Enclosure Material Outdoor UV-stabilised plastic Mounting Ball-joint mount (pole or wall) Dimensions 201.3 × 128 × 32.5 mm Weight 400 g (without mount) • 480 g (with mount) Compliance NDAA compliant Certifications Anatel: 06187-19-08356 Downloads & Resources UMA-D Tech Specs UMA-D Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi — NDAA Compliant Ubiquiti UniFi Aggregation Switch — 8-Port 10G SFP+ Layer 2 Managed, Fanless 1U (USW-Aggregation) The Ubiquiti UniFi Aggregation Switch (USW-Aggregation) is a managed Layer 2 switch built for high-bandwidth interconnects, delivering eight 10G SFP+ ports in a silent, fanless 1U rackmount chassis. With link aggregation for greater capacity and availability, it's the ideal backbone aggregation layer for any UniFi deployment — whether you're wiring a home lab, office, retail site, or commercial network anywhere in Australia. Centrally managed through the UniFi Network application, with genuine Ubiquiti stock and fast Australia-wide shipping. Ports 8 × 10G SFP+ Switching Capacity 160 Gbps Form Factor Fanless 1U Management Layer 2 Managed Why Choose the UniFi Aggregation Switch? Eight 10G SFP+ Ports Eight high-bandwidth 10G SFP+ ports provide a dedicated aggregation layer for high-speed interconnects between switches, servers, and UniFi gear — perfect for collapsing multiple links into one fast backbone. Link Aggregation for Capacity & Availability Bond multiple ports together to increase total throughput and add redundancy, so a single link failure won't take your network down — built for resilient interconnect topologies. 160 Gbps Switching Capacity Up to 80 Gbps non-blocking throughput, 160 Gbps switching capacity, and a 119.04 Mpps forwarding rate keep data moving without bottlenecks across demanding workloads. Silent Fanless Design A completely fanless 1U chassis runs silently and reliably — ideal for offices, studios, and quiet environments where rack noise is a concern, with no moving parts to fail. Copper & Fibre Flexibility The built-in 36 W power supply supports copper Ethernet UF-RJ45-10G modules (sold separately) in all eight ports, so you can mix 10G fibre and copper to match your run. UniFi Network Management Configure, monitor, and manage the switch from the UniFi Network application alongside the rest of your UniFi stack — one pane of glass, no licensing fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is a requirement. Technical Specifications Model USW-Aggregation Ports 8 × 10G SFP+ Switching Type Managed Layer 2 Gigabit Ethernet switch Total Non-Blocking Throughput 80 Gbps Switching Capacity 160 Gbps Forwarding Rate 119.04 Mpps Copper Module Support UF-RJ45-10G modules (sold separately) in all 8 ports Management Interface Ethernet in-band Power Method Universal AC input: 100–240 VAC, 50/60 Hz Power Supply AC/DC, internal, 36 W Max. Power Consumption 30 W ESD/EMP Protection Air: ±16 kV • Contact: ±12 kV Enclosure Material SGCC steel Dimensions 442.4 × 120 × 43.7 mm (17.42 × 4.72 × 1.72″) • 1U rackmount Weight 2.65 kg without mount • 2.74 kg with mount Cooling Fanless (silent) Operating Temperature −5 to 40°C (23 to 104°F) Operating Humidity 10–90% non-condensing Certifications CE, FCC, IC Compliance NDAA compliant Downloads & Resources USW-Aggregation Datasheet UniFi Aggregation Quick Start Guide Best For Network Backbones Aggregate 10G uplinks from multiple access switches into a single high-speed core. Servers & NAS Deliver fast, low-latency 10G connectivity to storage, NVRs, and virtualisation hosts. Offices & Studios Silent fanless operation suits quiet workspaces, edit suites, and home racks. UniFi Deployments Slots into any UniFi network as a dedicated aggregation layer, managed centrally. Managed through the UniFi Network application alongside the rest of your UniFi stack. All eight ports accept 10G SFP+ fibre transceivers; copper runs use UF-RJ45-10G modules (sold separately). Standard 1U rackmount with included mounting hardware; fanless for silent operation. Universal 100–240 VAC internal power supply — no external brick required. Frequently Asked Questions What is the USW-Aggregation used for? It's a Layer 2 aggregation switch with eight 10G SFP+ ports, designed to bond high-bandwidth links and serve as a fast backbone between switches, servers, and other UniFi gear. Does it support copper 10G connections? Yes. With UF-RJ45-10G copper Ethernet modules (sold separately), all eight ports can run copper instead of fibre — the internal 36 W supply powers them in every port. Is the switch fanless? Yes. The USW-Aggregation is completely fanless, running silently with no moving parts — ideal for quiet offices, studios, and home racks. How is it managed? It's managed through the UniFi Network application, giving you central control and monitoring alongside your other UniFi devices with no licensing fees. Does it provide PoE? No. The USW-Aggregation is an SFP+ aggregation switch and does not output PoE. Use a UniFi PoE switch for powering cameras and access points. Is the USW-Aggregation NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the USW-Aggregation is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX ac BaseStation — NDAA Compliant Ubiquiti Rocket 5AC Lite airMAX ac BaseStation (R5AC-Lite) The Ubiquiti Rocket 5AC Lite (R5AC-Lite) is a 5 GHz carrier-class airMAX® ac BaseStation built for high-performance Point-to-Point (PtP) backhaul and Point-to-MultiPoint (PtMP) deployments. Powered by Ubiquiti's airMAX ac chipset and a dedicated airPrism™ spectral analysis radio, it delivers 500+ Mbps of real TCP/IP throughput and scales to 50+ clients on a single sector. Pairs with an airMAX ac sector antenna or RocketDish for long-range links across homes, farms, ISP networks, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping. Band 5 GHz airMAX ac Throughput 500+ Mbps Capacity 50+ Clients Spectrum airPrism Radio Why Choose the Rocket 5AC Lite? Carrier-Class airMAX ac Performance Ubiquiti's airMAX ac technology delivers 500+ Mbps of real outdoor TCP/IP throughput with low latency — ideal for long-distance PtP backhaul and high-capacity PtMP sectors. Dedicated airPrism Spectral Filtering A separate airPrism™ active RF filtering radio isolates signals in congested environments, dramatically improving co-location performance at busy tower sites. Scales to 50+ Clients A single Rocket 5AC Lite sector serves 50+ airMAX clients, making it a cost-effective hub for wireless ISPs, estates, and multi-building campuses. Flexible PtP & PtMP Modes Deploy as a Point-to-Point backhaul bridge or a Point-to-MultiPoint base station — one radio covers both roles for maximum versatility. Pairs with airMAX ac Antennas Mounts directly to Ubiquiti airMAX ac sector antennas and RocketDish reflectors for tailored coverage and range, from wide sectors to focused long-haul links. Simple Gigabit PoE Install Powered over a single Ethernet run via the included 24V Gigabit PoE adapter — no separate power supply at the tower, with full management through airOS. Managed in UISP & airOS Configure, monitor, and maintain your links from airOS and Ubiquiti's UISP platform — with airControl-style oversight and no recurring licence fees. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity matters. Technical Specifications Model R5AC-Lite Type 5 GHz airMAX® ac BaseStation / radio Frequency Band 5 GHz Wireless Technology airMAX® ac with dedicated airPrism™ active RF filtering Throughput 500+ Mbps (real TCP/IP) Client Capacity 50+ airMAX clients Operating Modes Point-to-Point (PtP) & Point-to-MultiPoint (PtMP) Network Interface Gigabit Ethernet (RJ45) Power Method Passive PoE — 24V, 0.5A Gigabit PoE adapter (included) Management airOS® / UISP Antenna Compatibility airMAX ac sector antennas & RocketDish reflectors (sold separately) Regulatory FCC ID: SWX-R5ACL • IC: 6545A-R5ACL Compliance NDAA Section 889 compliant Downloads & Resources R5AC-Lite Tech Specs R5AC-Lite Quick Start Guide What's in the Box Rocket 5AC Lite (R5AC-Lite) 5 GHz airMAX ac BaseStation radio unit. Gigabit PoE Adapter 24V, 0.5A Gigabit PoE power adapter included. Mounting Hardware Mounting strap and screws for antenna attachment. Not Included An airMAX ac antenna (sector or RocketDish) and Ethernet cable are required and sold separately. Best For Wireless ISPs High-capacity PtMP sectors serving 50+ subscribers from a single tower-mounted base station. PtP Backhaul Reliable 500+ Mbps point-to-point bridges between buildings, sites, and remote properties. Rural & Farms Extend connectivity across large rural Australian properties where cabling is impractical. Campus & Estates Link multiple buildings or sheds wirelessly with carrier-class airMAX ac performance. Requires a compatible airMAX ac antenna — an airMAX ac sector antenna for PtMP or a RocketDish for PtP (sold separately). Powered by the included 24V Gigabit PoE adapter over a single Ethernet run. Configured and managed through airOS; monitor multiple links centrally in Ubiquiti UISP. Use a shielded outdoor Cat5e/Cat6 cable and ground the link for tower and rooftop installs. Frequently Asked Questions Does the Rocket 5AC Lite include an antenna? No. The R5AC-Lite is the radio only. You pair it with an airMAX ac sector antenna for PtMP or a RocketDish reflector for PtP links, sold separately. What's the difference between the Lite and the Prism version? Both share airMAX ac and airPrism technology. The Prism (Rocket 5AC Prism) adds higher-performance filtering for the most congested, co-located tower environments. How is it powered? Via the included 24V Gigabit PoE adapter — a single Ethernet cable carries both power and data to the radio. Can it run Point-to-Point and Point-to-MultiPoint? Yes. The Rocket 5AC Lite supports both PtP backhaul and PtMP base-station modes, configured in airOS. Is the Rocket 5AC Lite NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the R5AC-Lite is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Cat6 — NDAA Compliant UniFi 2m Cat6 RJ45 Patch Cable — White, Ultra-Thin 3mm, Bendable 90° Booted (U-Cable-Patch-2M-RJ45) The UniFi U-Cable-Patch-2M-RJ45 is a genuine Ubiquiti 2-metre Cat6 patch lead built for clean, professional UniFi installs. Its ultra-thin 3 mm jacket and booted RJ45 connectors that bend to 90° route neatly behind racks, around tight corners, and into wall plates without strain. Every cable passes the TIA-568-B.2 Cat6 Channel test by Fluke for reliable gigabit performance. Genuine Ubiquiti stock, NDAA compliant, in stock in Australia with fast AU-wide shipping. Bendable 90° Booted Ends The booted RJ45 connectors flex up to 90° at both ends, letting you route the cable cleanly into tight spaces and behind equipment without kinking. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter keeps cable bundles tidy and takes up minimal space in patch panels, conduits, and behind wall plates. Fluke-Tested Cat6 Performance Each cable passes the TIA-568-B.2 Cat6 Channel test by Fluke, delivering dependable gigabit Ethernet for UniFi switches, APs, and cameras. Genuine Ubiquiti, NDAA Compliant Authentic Ubiquiti accessory that matches the UniFi aesthetic and meets NDAA Section 889 requirements for security-sensitive sites. Technical Specifications Model U-Cable-Patch-2M-RJ45 Cable Type Cat6 RJ45 Ethernet patch cable Length 2 m Outer Diameter Ultra-thin 3 mm Connectors Booted RJ45, both ends bendable to 90° Performance Passes TIA-568-B.2 Cat6 Channel test by Fluke Colour White Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UFiber 10G SFP+ — NDAA Compliant Ubiquiti UFiber 10G Multi-Mode SFP+ Module — 300m, 2-Pack (UACC-OM-MM-10G-D-2) The Ubiquiti UFiber UACC-OM-MM-10G-D-2 is a 2-pack of 10 Gbps multi-mode SFP+ transceiver modules built for high-speed fibre links of up to 300 m. With dual LC connectors and 850 nm optics, this pair is the simple way to connect UniFi and UISP switches, routers, and aggregation gear over multi-mode fibre. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. 10 Gbps SFP+ Full 10 Gigabit throughput per module — ideal for switch uplinks, inter-rack links, and high-bandwidth aggregation. Multi-Mode, 300 m 850 nm multi-mode optics deliver reliable 10G links over distances up to 300 metres on OM-grade fibre. Dual LC Connectors Standard 2x LC duplex interface plugs straight into any SFP+ port on compatible UniFi and UISP hardware. Value 2-Pack Two matched modules in every box — pair both ends of a fibre run in a single purchase. Technical Specifications Model UACC-OM-MM-10G-D-2 (2-Pack) Supported Media Multi-Mode Fiber Connector Type 2x LC TX Wavelength 850 nm RX Wavelength 850 nm Data Rate 10 Gbps SFP+ Cable Distance Up to 300 m Quantity 2 modules per pack Compliance NDAA compliant Downloads & Resources UFiber 10G Module Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX Omni — NDAA Compliant Ubiquiti airMAX 5 GHz Dual-Omni 13 dBi Antenna (AMO-5G13) The Ubiquiti AMO-5G13 is a carrier-class 5 GHz omni-directional antenna delivering 2x2 dual-polarity, omni-directional MIMO performance with 13 dBi of gain. Designed for seamless integration with Ubiquiti airMAX Rocket radios, it provides 360° coverage for point-to-multipoint base stations, making it ideal for WISP towers, campus and rural broadband distribution, and wide-area wireless networks across Australia. Supplied with all mounting accessories and brackets, with genuine Ubiquiti stock and fast Australia-wide shipping. 2x2 Dual-Polarity MIMO Dual-polarity design delivers true 2x2 MIMO throughput when paired with a compatible airMAX Rocket radio, maximising capacity and link reliability. 360° Omni Coverage Omni-directional radiation pattern provides all-round 5 GHz coverage from a single mast — perfect for point-to-multipoint base stations serving clients in every direction. Seamless Rocket Integration Engineered to mount directly to Ubiquiti airMAX Rocket hardware for a clean, weather-sealed base-station build with no extra adapters. Complete Mounting Kit Ships with all brackets and mounting accessories included, so it's ready to deploy on towers and poles straight out of the box. Technical Specifications Model AMO-5G13 Frequency Range 5 GHz Gain 13 dBi Polarity Dual-polarity (2x2 MIMO) Radiation Pattern Omni-directional (360°) Compatibility Ubiquiti airMAX Rocket radios Mounting All brackets & mounting accessories included Compliance NDAA compliant Downloads & Resources AMO-5G13 Datasheet Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine Ubiquiti — NDAA Compliant Ubiquiti PoE Injector 24V 24W (POE-24-24W) The Ubiquiti POE-24-24W is a 24 VDC, 24 W passive PoE injector that delivers power over a single Ethernet cable to compatible Ubiquiti 24V devices — ideal where a 24V PoE switch port isn't available. It includes earth grounding / ESD protection and a power LED, and ships with an Australian (AU) power cable. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Model POE-24-24W Output Voltage 24 VDC @ 1.0 A (24 W) Input Voltage 90–260 VAC @ 47–63 Hz Input Current 0.3 A @ 120 VAC • 0.2 A @ 230 VAC Efficiency 70%+ Output Ripple 1% max Switching Frequency 200 kHz Line Regulation ±0.5% Load Regulation ±1% Protection Earth grounding / ESD protection • power LED Power Cable Australian (AU) power cable included Operating Temperature −10°C to +60°C Storage Temperature −20°C to +85°C Operating Humidity 5% to 90% non-condensing Dimensions (L × W × H) 85 × 43 × 30 mm Compliance NDAA compliant 24V / 24W Passive PoE Delivers a clean 24 VDC @ 1.0 A (24 W) over Ethernet to power compatible Ubiquiti 24V hardware from a single cable run. Earth Grounding & ESD Protection Built-in earth grounding and ESD protection help shield connected gear from surges, with a front power LED for at-a-glance status. AU Cable, Wide Input Range Ships with an Australian power cable and accepts 90–260 VAC, ready to plug in straight out of the box anywhere in Australia. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine Ubiquiti IR Extender — NDAA Compliant Extend Your Night Vision Further The Ubiquiti UVC-G4-IRExtender is a long-range infrared LED accessory that boosts the night-vision reach of your UniFi Protect G4 Bullet Camera by up to 25 m (82 ft). Powered and controlled directly by the camera, it adds extra IR coverage with no separate power supply and no extra wiring. Weather resistant for outdoor installs, it is a simple, plug-and-play upgrade for darker sites anywhere in Australia — backed by genuine Ubiquiti stock and fast Australia-wide shipping. Extended IR Range Boosts infrared coverage up to 25 m (82 ft) for clearer, longer-reaching night vision. Camera-Powered Powered and controlled directly by the UniFi camera — no extra power supply or wiring required. Weather Resistant Built to perform reliably in outdoor installations alongside your G4 Bullet camera. Plug-and-Play A simple long-range IR LED add-on for the UniFi Protect G4 Bullet and UniFi Video Camera G3. Technical Specifications Model UVC-G4-IRExtender Category IR Range Extender IR Range Up to 25 m (82 ft) Power Method Powered & controlled by camera Weather Resistance Yes — outdoor rated Compatible With UniFi Protect G4 Bullet (UVC-G4-BULLET), UniFi Video Camera G3 (UVC-G3) Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

5GHz airFiber Dish, 23dBi, Slant 45 Universal Pole Mount, airFiber X Radio Bracket, and Weatherproof RF Connectors Included

Read more less

UISP airMAX — NDAA Compliant Ubiquiti Bullet AC IP67 — Dual-Band 802.11ac Titanium Radio (BulletAC-IP67) The Ubiquiti Bullet AC IP67 (BulletAC-IP67) is a rugged dual-band 802.11ac radio from the Titanium series, built to turn almost any antenna into a high-performance wireless link. Operating across both the 2.4 GHz and 5 GHz bands, it suits point-to-point (PtP) and point-to-multipoint (PtMP) deployments where flexible frequency coverage and deploy-anywhere durability matter. An N-Male connector couples it directly to a compatible antenna, and an IP67-rated Titanium enclosure stands up to harsh outdoor conditions. Backed by genuine Ubiquiti stock and fast Australia-wide shipping. Dual-Band 2.4 & 5 GHz Covers both the 2.4 GHz and 5 GHz bands, giving you a wide range of frequency options to suit short links and longer-distance connections. 802.11ac Performance Built on the 802.11ac standard for modern, high-throughput wireless links across PtP and PtMP topologies. IP67 Titanium Build A Titanium-series enclosure sealed to IP67 delivers deploy-anywhere reliability through rain, dust, and tough Australian outdoor conditions. N-Male Antenna Coupling An integrated N-Male connector lets you mate the Bullet directly to a compatible antenna and create a custom wireless link. Technical Specifications Model Bullet AC IP67 (BulletAC-IP67) Series Titanium Wireless Standard 802.11ac Frequency Bands Dual-band — 2.4 GHz & 5 GHz Antenna Connector N-Male Use Case Point-to-Point (PtP) & Point-to-Multipoint (PtMP) links Environmental Rating IP67 Compliance NDAA compliant Downloads & Resources Bullet AC IP67 Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

airMAX ac BaseStation Radio — NDAA Compliant Ubiquiti Rocket 5AC Prism Gen2 — Full-Band 5GHz airMAX ac Radio (RP-5AC-GEN2) The Ubiquiti Rocket 5AC Prism Gen2 (RP-5AC-GEN2) is a high-performance 5 GHz BaseStation radio built for long-distance, high-capacity wireless links and point-to-multipoint deployments. It combines Ubiquiti’s airMAX® ac and patented airPrism® filtering technologies to deliver exceptional throughput and interference rejection — even in dense, co-located RF environments. Pair it with a compatible airMAX ac sector antenna to build robust WISP, campus, or site-to-site backhaul links anywhere in Australia, backed by genuine Ubiquiti stock and fast Australia-wide shipping. Band Full 5 GHz Technology airMAX ac + airPrism Interface Gigabit Ethernet Positioning Built-in GPS Why Choose the Rocket 5AC Prism Gen2? Full-Band 5 GHz Coverage The Rocket 5AC Prism covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas. Revolutionary airPrism Filtering Ubiquiti’s patented airPrism® technology provides breakthrough radio selectivity in the unlicensed wireless band. It isolates signals within the operating channel to increase capacity and throughput in co-location deployments. Designed for High Performance EMI-shielded metal housing, integrated GPS, airPrism circuitry, and the airView® real-time spectrum analyzer combine to deliver maximum spectral efficiency and throughput. Gigabit Backhaul Ready A single 10/100/1000 Ethernet port handles high-throughput data over one cable, making the radio ideal for point-to-point and point-to-multipoint backhaul links. Built for the Outdoors A rugged design rated for a wide −40°C to 80°C operating range keeps links reliable through demanding Australian conditions, from coastal sites to inland heat. NDAA Compliant Fully NDAA Section 889 compliant for government, defence, and security-sensitive deployments where supply-chain integrity is required. Technical Specifications Model RP-5AC-GEN2 (Rocket 5AC Prism Gen2) Frequency Band Full 5 GHz band Technology airMAX ac & airPrism Processor Atheros MIPS 74Kc, 720 MHz Memory 128 MB DDR2 SDRAM, 16 MB NOR Flash Operation Mode Access Point, Station Encryption WPA2 AES Only Network Interface (1) 10/100/1000 Ethernet Port Max. Power Consumption 8.5 W Power Supply 24V, 0.5A Gigabit PoE (included) Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Positioning Built-in GPS Spectrum Analysis airView real-time spectrum analyzer Enclosure EMI-shielded metal housing Dimensions 88 × 40 × 230 mm Weight 400 g Operating Temperature −40°C to 80°C Operating Humidity 5 to 95% non-condensing Compliance NDAA compliant Downloads & Resources RP-5AC-GEN2 Datasheet What's in the Box Rocket 5AC Prism Gen2 Radio RP-5AC-GEN2 BaseStation radio with EMI-shielded metal housing. Gigabit PoE Adapter 24V, 0.5A Gigabit PoE power adapter included. Mounting Hardware Pole-mount hardware for attaching to a compatible airMAX ac sector antenna. Not Included An airMAX ac sector or dish antenna and outdoor Ethernet cabling are sold separately. Best For WISP Networks High-capacity point-to-multipoint distribution for wireless internet service providers in dense RF areas. Site-to-Site Backhaul Reliable long-distance links connecting buildings, towers, and remote sites over the full 5 GHz band. Campus & Rural Extend connectivity across campuses, farms, and rural properties where wired runs are impractical. Co-Located Towers airPrism filtering rejects interference where multiple radios share a single mast or tower. Pairs with a compatible airMAX ac sector or dish antenna (sold separately) to form a complete link. Powered by the included 24V Gigabit PoE adapter over a single Ethernet cable. Managed via airOS for configuration, alignment, and airView spectrum analysis. Built-in GPS aids timing, synchronisation, and location tracking across multi-radio deployments. Frequently Asked Questions Does the Rocket 5AC Prism Gen2 include an antenna? No. The radio pairs with a separate airMAX ac sector or dish antenna, sold separately, to form a complete wireless link. What is airPrism technology? airPrism is Ubiquiti’s patented filtering technology that isolates signals within the operating channel, dramatically improving selectivity and throughput in co-located, high-density RF environments. How is the radio powered? It uses the included 24V, 0.5A Gigabit Passive PoE adapter, delivering power and data over a single Ethernet cable. Is it suitable for outdoor use in Australia? Yes. The rugged housing and −40°C to 80°C operating range suit demanding Australian outdoor environments, from coastal to inland sites. Is the Rocket 5AC Prism Gen2 NDAA compliant? Yes. Ubiquiti is a US-based manufacturer and the RP-5AC-GEN2 is NDAA Section 889 compliant — suitable for government and security-sensitive sites. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Patch Cable — NDAA Compliant UniFi Cat6 Patch Cable 0.22m Blue — Ultra-Thin Bendable RJ45 (U-Cable-Patch-RJ45-BL) The UniFi Patch Cable (U-Cable-Patch-RJ45-BL) is a genuine Ubiquiti ultra-thin Cat6 RJ45 patch lead built for clean, high-density UniFi installs. At just 3 mm in diameter with booted ends that bend up to 90 degrees, it keeps switch and patch-panel cabling tidy where space is tight. The compact 0.22 m (220 mm) length is ideal for switch-to-switch and rack interconnects. Genuine Ubiquiti stock with fast shipping right across Australia. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter routes neatly through dense racks and behind UniFi switches without adding bulk. 90° Bendable Booted Ends Both RJ45 connectors flex up to 90 degrees, letting cables sit flush against gear and reducing strain on the port. Cat6 Performance Cat6-rated copper supports Gigabit Ethernet for reliable switch, AP, and device interconnects. Genuine UniFi Accessory Colour-coded blue to match Ubiquiti’s cabling system and keep your rack organised at a glance. Technical Specifications Model U-Cable-Patch-RJ45-BL Type Cat6 RJ45 Ethernet patch cable Connectors RJ45 to RJ45, booted — bendable up to 90° on both ends Cable Length 0.22 m (220 mm) Outer Diameter Ultra-thin 3 mm Colour Blue Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

UniFi Patch Cable — NDAA Compliant Ubiquiti UniFi Cat6 Patch Cable — 0.22m Black, Bendable RJ45 (U-Cable-Patch-RJ45-BK) The Ubiquiti UniFi Patch Cable (U-Cable-Patch-RJ45-BK) is a genuine Cat6 RJ45 patch lead built for clean, professional UniFi installs. At just 220 mm (0.22 m) long with an ultra-thin 3 mm diameter and both ends bendable to 90°, it keeps cabling tidy inside racks, enclosures, and behind switches and gateways. Finished in black to match UniFi hardware, it's the ideal short jumper for patch panels and equipment-to-equipment runs. Genuine Ubiquiti stock with fast Australia-wide shipping and expert AU support. Cat6 Performance Cat6-rated RJ45 patch lead for reliable gigabit connectivity between UniFi switches, gateways, and patch panels. Bendable 90° Booted Ends Both RJ45 ends bend to 90°, letting you route cleanly out of tight spaces without strain on the connector. Ultra-Thin 3 mm Profile A slim 3 mm outer diameter keeps high-density racks and enclosures neat and easy to manage. Short 220 mm Jumper The compact 0.22 m length is purpose-built for short patch-panel and adjacent-device connections. Technical Specifications Model U-Cable-Patch-RJ45-BK Cable Category Cat6 Connectors RJ45 (both ends), booted & bendable to 90° Length 220 mm (0.22 m) Outer Diameter Ultra-thin 3 mm Colour Black Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti — NDAA Compliant Ubiquiti POE-24 Gigabit PoE Adapter — 24V DC PoE Injector with Surge Protection The Ubiquiti POE-24 is a genuine 24V DC Gigabit PoE adapter that delivers both power and data to compatible Ubiquiti devices over a single Ethernet cable. Built with surge, clamping and ESD protection plus an AC cable with earth ground, it helps guard your equipment against the leading cause of outdoor device failures. NDAA Section 889 compliant and backed by genuine Ubiquiti stock, it ships fast Australia-wide from CCTV Guru. Output 24V DC LAN Port Gigabit Protection Surge & ESD Compliance NDAA 24V DC Gigabit Power Supplies 24V DC power and Gigabit data over a single Ethernet cable to compatible Ubiquiti devices — no separate power run required. Built-In Surge & ESD Protection Difference and common-mode surge protection, clamping protection (11V data, 60V power) and an earthed AC cable help defend against the leading cause of outdoor device failures. Remote Reset & Reset Button On-board reset button and remote reset capability make it easy to power-cycle and recover connected devices. NDAA Compliant Fully NDAA Section 889 compliant for government, defence and security-sensitive installations across Australia. Model Ubiquiti POE-24 (24V PoE Adapter) Output Voltage 24V DC Rated Input 100–240V AC @ 50/60 Hz LAN Port Gigabit (RJ45 shielded socket) Reset Reset button + remote reset capability Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power AC Connector IEC-320 C6 (earthed AC cable) Operating Temperature 0 to 40°C Certifications CE, FCC, IC, UL Compliance NDAA compliant POE-24 Datasheet (ui.com) Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Genuine Ubiquiti PoE Adapter — NDAA Compliant Ubiquiti POE-24-7W-G-WH — 24V DC Gigabit PoE Injector (0.3A / 7W) The Ubiquiti POE-24-7W-G-WH is a genuine 24V DC Gigabit PoE adapter that powers compatible Ubiquiti devices over a single Ethernet cable, with built-in surge and clamping protection to help safeguard your gear. Delivering 24V DC at 0.3A (7W) through a Gigabit-capable RJ45 port, it's the reliable way to power 24V passive PoE UniFi and airMAX hardware where a PoE switch isn't available. Backed by genuine Ubiquiti stock and fast Australia-wide shipping, with expert AU support on hand. 24V DC Gigabit Output Supplies 24V DC @ 0.3A (7W) over a Gigabit LAN port, powering and connecting your 24V passive PoE device through one cable. Surge & Clamping Protection Difference and common-mode surge protection with up to 1500A max surge discharge and 11V data / 60V power clamping helps protect connected equipment. Remote Reset Capability Built-in reset button and remote reset support let you power-cycle a connected device without unplugging it on site. Genuine Ubiquiti, NDAA Compliant Authentic Ubiquiti hardware that is NDAA Section 889 compliant, suitable for government and security-sensitive installs. Model POE-24-7W-G-WH Output Voltage 24V DC @ 0.3A (7W) Rated Input 100–240V AC @ 50/60 Hz Input Current 0.3A @ 120V AC, 0.2A @ 240V AC Gigabit LAN Port Yes Data IN / PoE RJ45 shielded socket 2-Pair Powering Pins 4, 5 (+) and Pins 7, 8 (−) Reset Button Yes (remote reset capable) Efficiency 80+% Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power Peak Pulse Current 36A (10/1000 µs) data AC Connector IEC-320 C6 Operating Temperature 0 to 40°C Operating Humidity 35 to 95% non-condensing Dimensions / Weight 72 × 45 × 33 mm • 72.1 g Certifications CE, FCC, IC, UL Compliance NDAA compliant Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti — NDAA Compliant Ubiquiti Instant 802.3af PoE to USB Adapter — 5VDC 2A Output (INS-3AF-USB) The Ubiquiti INS-3AF-USB is a compact 802.3af PoE-to-USB converter that draws power from any auto-sensing 802.3af PoE switch and delivers a clean 5VDC / 2A (10 W) USB output to power and recharge a wide range of USB devices — smartphones, tablets, sensors, and other handheld electronics. With no separate power supply needed, it's an easy way to extend power over your existing network cabling. Genuine Ubiquiti stock with fast Australia-wide shipping. Model INS-3AF-USB Function 802.3af PoE to USB power converter Power Input 802.3af PoE (auto-sensing PoE switch) USB Output 5 VDC, 2 A (10 W) Use Powers & recharges USB-powered devices Compliance NDAA compliant Power USB Devices Over PoE Converts 802.3af PoE into a standard 5VDC 2A USB output so you can power USB devices straight from your network switch. Plug-and-Play Integrates seamlessly with auto-sensing 802.3af PoE switches — no separate power adapter required. Multipurpose Recharge smartphones, tablets, and other handheld USB devices, or power low-draw USB peripherals. Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti — NDAA Compliant Ubiquiti POE-54V-80W EdgePoint PoE Injector — 54VDC 80W Gigabit The Ubiquiti POE-54V-80W is a genuine 54V DC, 80W Gigabit PoE injector engineered to power Ubiquiti EdgePoint devices — including the EP-R8 and EP-S16 — over a single Ethernet run. It delivers 54V DC at 1.5A through a shielded RJ45 socket, with built-in surge and clamping protection to safeguard your equipment. An Australian (AU) power cable is included, and every unit ships as genuine Ubiquiti stock with fast Australia-wide delivery. Model POE-54V-80W (EdgePoint PoE Injector) Output Voltage 54V DC @ 1.5A Rated Input 100–240V AC @ 50/60Hz Input Current 0.8A @ 120V AC • 0.4A @ 240V AC Gigabit LAN Port Yes 4-Pair Powering Pins 1, 2, 4, 5 (+) and Pins 3, 6, 7, 8 (−) Data IN / PoE RJ45 shielded socket AC Connector IEC-320 C6 (AU power cable included) Efficiency 87+% Surge Protection Difference and common mode Clamping Protection 11V data, 60V power Max. Surge Discharge 1500A (8/20 µs) power Dimensions / Weight 123 × 65 × 34 mm • 299 g Operating Temperature 0 to 40°C, 35–95% non-condensing Certifications CE, FCC, IC, UL Compliance NDAA compliant POE-54V-80W Tech Specs Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less