16-Port Gigabit PoE+ Switch Built for CCTV and SMB Networks The TP-Link TL-SG1218MPE is a JetStream Easy Smart switch that combines 16 Gigabit PoE+ ports, a 192W power budget, and intelligent traffic management in a rack-mountable 1U chassis. Designed for small to medium business surveillance systems, wireless deployments, and IP phone networks, it delivers the performance and control of a managed switch with the simplicity of easy smart configuration — no advanced networking expertise required. Key Features 16× Gigabit PoE+ Ports (802.3at/af): Power and connect IP cameras, wireless access points, VoIP phones, and other PoE/PoE+ devices across all 16 ports simultaneously. 192W Total PoE Budget: One of the highest PoE budgets in its class — supports a full deployment of 16 standard PoE cameras or a mixed load of PoE+ devices. 2× SFP Fibre Uplink Ports: Connect to fibre backbone switches or extend your network over long distances using single-mode or multi-mode fibre. QoS (Quality of Service): Prioritises video and voice traffic to ensure smooth, uninterrupted camera feeds and VoIP calls even under heavy network load. IGMP Snooping: Optimises multicast traffic for IPTV and IP camera streams, reducing unnecessary bandwidth consumption across the network. Port Priority: Assign priority to specific ports to guarantee performance for latency-sensitive devices such as IP cameras and NVRs. Intelligent PoE Power Management: Automatically monitors and manages PoE power distribution to protect against overload. 802.1Q VLAN Support: Segment your network for improved security and traffic isolation between cameras, staff devices, and guest networks. Rack Mountable (1U): Standard 19-inch rack form factor (440 × 180 × 44mm) for clean, professional installations in comms cabinets and server rooms. 36 Gbps Switching Capacity: Non-blocking switching fabric handles high-bandwidth video streams from multiple cameras without bottlenecks. Common Use Cases 16-camera IP CCTV systems for retail, warehouses, and commercial buildings Multi-access-point Wi-Fi deployments in offices, schools, and hospitality venues VoIP phone networks for small to medium businesses Mixed PoE/PoE+ deployments requiring high total power budgets Network segmentation with VLAN for security-conscious installations Fibre uplink to a core switch in multi-floor or multi-building networks Technical Specifications Model TL-SG1218MPE RJ45 Ports 16× 10/100/1000Mbps (all PoE+) SFP Ports 2× Gigabit SFP (fibre uplink) PoE Standard IEEE 802.3at (PoE+) / 802.3af (PoE) Total PoE Budget 192W Switching Capacity 36 Gbps Packet Forwarding Rate 23.8 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mbit Jumbo Frame 9KB VLAN 802.1Q VLAN QoS Yes (802.1p) IGMP Snooping Yes Fans 2× (active cooling) Physical Security Lock Yes Mounting Rack mountable (19″, 1U) Dimensions (W × D × H) 440 × 180 × 44mm Power Supply 100–240V AC, 50/60Hz (internal) Max Power Consumption 18.73W (no PD) / 217.22W (full PoE load) Standards IEEE 802.3/802.3u/802.3ab/802.3x/802.3af/802.3at/802.1q/802.1p Management Easy Smart (web UI) Frequently Asked Questions What is an “Easy Smart” switch? Easy Smart is TP-Link's simplified management tier — it provides a web-based interface for configuring features like VLANs, QoS, port priority, and IGMP Snooping without the complexity of a fully managed switch. It's ideal for installers and IT staff who need more control than an unmanaged switch but don't require enterprise-level CLI management. Does the TL-SG1218MPE support PoE+ (802.3at)? Yes. All 16 RJ45 ports support both IEEE 802.3af (PoE, up to 15.4W) and IEEE 802.3at (PoE+, up to 30W per port), subject to the 192W total power budget shared across all ports. How many cameras can I connect? Up to 16 IP cameras can be connected via the PoE+ ports. For standard 802.3af cameras drawing around 10–12W each, the 192W budget comfortably supports a full 16-camera deployment. For higher-power PTZ or PoE+ cameras, calculate your total load to stay within the 192W budget. What are the SFP ports used for? The two SFP ports accept Gigabit fibre modules (single-mode or multi-mode) for uplink connections to a core switch or to extend your network over long distances — useful in multi-building or multi-floor installations where copper Ethernet is impractical. Can I set up VLANs on this switch? Yes. The TL-SG1218MPE supports 802.1Q VLAN configuration via its web-based Easy Smart interface, allowing you to segment camera traffic, staff devices, and guest networks onto separate logical networks for improved security and performance. Is it rack mountable? Yes. The TL-SG1218MPE is a standard 1U rack-mountable switch (440mm wide) and includes rack mounting brackets. It fits any standard 19-inch equipment rack or comms cabinet.

Read more less

TP-Link TL-SG1008MP — 8-Port Gigabit PoE+ Switch The TP-Link TL-SG1008MP is a reliable, plug-and-play 8-port Gigabit PoE+ switch designed for professional security installations, small business networks, and home office setups. With a 126W total PoE budget and support for up to 30W per port, it powers IP cameras, access points, VoIP phones, and access control devices over a single Ethernet cable — no separate power adapters required. Key Features 8 × 10/100/1000Mbps RJ45 ports, all PoE+ enabled IEEE 802.3at/af compliant — compatible with a wide range of PoE devices 126W total PoE power budget with up to 30W per port 16Gbps backplane bandwidth for smooth, uninterrupted data transfer Energy-efficient design reduces power consumption by up to 75% Store-and-forward switching with auto MDI/MDIX and auto-negotiation Desktop and rack-mountable — includes rackmount kit Plug-and-play setup — no configuration or software required Typical Use Cases CCTV & IP Camera Systems: Power and connect up to 8 PoE IP cameras from a single switch Access Control: Drive electromagnetic locks, card readers, and intercoms via PoE Wireless Networks: Power multiple Wi-Fi access points without running separate power cables Small Business & Office Networks: Reliable Gigabit connectivity for workstations, VoIP phones, and peripherals Home Networks: Expand your home network with fast, efficient switching Technical Specifications Specification Detail Ports 8 × 10/100/1000Mbps RJ45 (all PoE+) PoE Standard IEEE 802.3at / 802.3af Total PoE Budget 126W Max PoE per Port 30W Backplane Bandwidth 16Gbps MAC Address Table 4K Buffer Size 1.5Mbits Transfer Method Store-and-Forward Power Supply 100–240VAC, 50/60Hz Max Power Consumption 140.67W (with 126W PD connected) Dimensions (W × D × H) 294 × 180 × 44mm Mounting Desktop / Rack-mountable (1U) Fan 1 × internal fan Certifications FCC, CE, RoHS Network Media Cat 3/4/5 (10BASE-T), Cat 5/5e (100BASE-TX), Cat 5/5e/6+ (1000BASE-T), max 100m In the Box TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet Frequently Asked Questions Is the TL-SG1008MP managed or unmanaged? The TL-SG1008MP is an unmanaged switch. It requires no configuration — simply plug in your devices and it works straight away. There is no web interface, VLAN support, or QoS settings. Can I use non-PoE devices on this switch? Yes. All 8 ports support standard Gigabit Ethernet. Non-PoE devices such as computers, NVRs, and NAS units will connect and operate normally — the switch will not supply power to devices that don't request it. How many IP cameras can this switch power? With a 126W total PoE budget, the number of cameras depends on each camera's power draw. For example, 8 cameras drawing 15W each would use 120W — well within budget. Higher-draw cameras (e.g. PTZ at 25–30W) may reduce the total count. Is this switch rack-mountable? Yes. The TL-SG1008MP includes a rackmount kit and fits a standard 1U rack enclosure. It can also be used as a desktop unit with the included rubber feet. What is the difference between the TL-SG1008MP and the TL-SG1008PE? The TL-SG1008MP is the updated replacement model for the TL-SG1008PE. Both offer 8-port Gigabit PoE+, but the TL-SG1008MP features an improved design and is the currently supported model from TP-Link. Does this switch ship Australia-wide? Yes. CCTV Guru ships the TL-SG1008MP to all states and territories across Australia from local stock.

Read more less

TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Unmanaged PoE Switch16 PoE+ 10/100Mbps RJ45 ports, 2 Gigabit RJ45 ports and 2 combo Gigabit SFP slotsUp to 250m data and power transmission under extend mode specially designed for surveillance systemPriority mode for port1-8 to guarantees the quality of sensitive applications like video monitorHigh PoE power budget with up to 30W for each PoE port and 194W for all PoE portsEasy to use, with no configuration and installation neededHARDWARE FEATURES Interface 16 PoE+ 10/100Mbps RJ45 Ports 2 10/100/1000Mbps RJ45 Ports 2 Combo Gigabit SFP Slots Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-X MMF, SMF Fan Quantity 2 Fans Physical Security Lock Yes Power Supply 100-240V AC, 50/60 Hz Backup Bandwidth 7.2 Gbps PoE+ Ports(RJ45) Standard: 802.3at/802.3af compliant PoE Ports: Port1- Port16 PoE Power Budget: 192W Mac Address Table 8K Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in. (440 × 180 × 44 mm) Max Power Consumption 18.7 W (no PD connected) 217.2 W (with 192W PD connected) Max Heat Dissipation 63.9 BTU/h (no PD connected) 741.2 BTU/h (with 192W PD connected) SOFTWARE FEATURES Advanced Features Compatible with IEEE 802.3at/af compliant devices Port Priority Mode Extend Mode (Up to 250m PoE power supply and data transmission) Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control Transmission Method Store-And-Forward

Read more less

The TP-Link TL-SG116 is a high-performance 16-Port Gigabit Unmanaged Switch designed to provide an easy and reliable way to expand your wired network. Whether you are connecting multiple IP cameras, upgrading your home office, or building out a small business network, the TL-SG116 delivers Gigabit speeds without the need for complex configuration. Key Performance Features 16 Gigabit Ports: Every port provides high-speed data transfer, ideal for bandwidth-intensive devices like 4K NVRs, servers, and gaming consoles. Massive Capacity: Boasts a 32Gbps switching capacity and a 23.81Mpps forwarding rate to ensure zero bottlenecks in your network traffic. Robust Hardware: Features an 8K MAC address table and a 4.1Mb buffer for smooth data handling across all connected devices. Silent & Durable: The fanless metal casing ensures silent operation, making it perfect for noise-sensitive environments like bedrooms or offices. Why Choose the TL-SG116? Plug-and-Play: No software or configuration required. Simply plug in your cables and you're ready to go. Versatile Mounting: The compact design supports both desktop placement and wall-mounting for flexible cable management. Green Technology: Automatically adjusts power consumption according to link status and cable length to reduce your carbon footprint. Traffic Optimization: Supports 802.1p/DSCP QoS and IGMP Snooping for smooth latency-sensitive traffic like voice and video. Technical Specifications Feature Specification Number of Ports 16 × 10/100/1000Mbps RJ45 Ports Switching Capacity 32 Gbps Packet Forwarding Rate 23.81 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mb Casing Material Durable Steel Mounting Options Desktop / Wall-Mount Fan Quantity Fanless (Silent) Standard & Protocols IEEE 802.3i/u/ab/x, 802.1p

Read more less

Power and Connect Up to 4 PoE Devices with a Single Cable The TP-Link TL-SF1005P is a compact, plug-and-play unmanaged switch with four 802.3af PoE ports and a generous 58W total power budget. It eliminates the need for separate power adapters by delivering both data and power over a single Ethernet cable — making it a practical choice for small CCTV installations, wireless access point deployments, and VoIP phone setups in homes, small offices, and retail environments across Australia. Key Features 4× PoE Ports (802.3af): Power IP cameras, access points, VoIP phones, and other 802.3af-compliant devices without separate power adapters or injectors. 58W Total PoE Budget: Up to 15.4W per PoE port, with a combined budget of 58W across all four ports — higher than many comparable desktop switches. 5× 10/100Mbps RJ45 Ports: Four PoE-enabled ports plus one uplink port for connecting to your router or network. Plug & Play: No configuration, software, or management interface required — connect and it works immediately. Fanless & Silent: Completely silent operation — suitable for desks, reception areas, and home installations. Auto-Negotiation & Auto MDI/MDIX: Automatically adjusts to connected devices and cable types for hassle-free setup. Overload Protection: Automatically manages power distribution to prevent overloading connected PoE devices. Compact Form Factor: Small desktop footprint (99.8 × 98 × 25mm) fits easily on a desk, shelf, or inside a cabinet. Common Use Cases Powering 1–4 IP security cameras in small CCTV systems Connecting and powering wireless access points in small offices or retail stores VoIP phone deployments in reception areas or small teams Expanding a home or office network to locations without nearby power outlets Replacing a PoE injector with a multi-port solution for cleaner cable management Technical Specifications Model TL-SF1005P Total Ports 5× 10/100Mbps RJ45 PoE Ports 4× (Ports 1–4), IEEE 802.3af Max PoE Per Port 15.4W Total PoE Budget 58W Switching Capacity 1 Gbps MAC Address Table 2K Transmission Method Store-and-Forward Power Supply External adapter — 48V DC / 1.25A Max Power Consumption 1.70W (no PD) / 63.51W (full PoE load) Fan Fanless (silent) Dimensions (W × D × H) 99.8 × 98 × 25mm Cable Type Cat3/4/5 (10BASE-T), Cat5/5e (100BASE-TX), max 100m Operating Temperature 0°C to 40°C Certifications CE, RoHS, FCC In the Box TL-SF1005P, Power Adapter, Installation Guide Frequently Asked Questions What is the difference between the TL-SF1005P and the TL-SF1005LP? The TL-SF1005P has a higher total PoE budget of 58W compared to the TL-SF1005LP's 41W. The TL-SF1005P also lacks the Extend Mode (250m) and Priority Mode features found on the TL-SF1005LP. If you need longer cable runs, choose the TL-SF1005LP; if you need more total PoE power, choose the TL-SF1005P. Is the TL-SF1005P managed or unmanaged? It is an unmanaged switch. There is no web interface, app, or software — it operates automatically with no configuration required. Simply plug in your devices and it works. Can I use it with 802.3at (PoE+) devices? The TL-SF1005P supports IEEE 802.3af only, providing up to 15.4W per port. It is not compatible with 802.3at PoE+ devices that require more than 15.4W. For PoE+ devices, consider a TP-Link PoE+ switch. How many IP cameras can I connect? Up to 4 IP cameras can be connected via the PoE ports (Ports 1–4). The fifth port is a standard uplink port for connecting to your router or NVR. Ensure the total power draw of all connected cameras does not exceed 58W. Does it support VLAN or QoS? No. As an unmanaged switch, it does not support VLAN, QoS, or any advanced traffic management. It is designed for simple plug-and-play deployments. What cable length is supported for PoE? Standard Ethernet cable runs up to 100m are supported for both data and PoE power delivery. Unlike the TL-SF1005LP, this model does not include an Extend Mode for longer runs.

Read more less

TP-Link TL-SG1005P 5-Port Gigabit PoE Switch (4-Port PoE, 56W) Power and Connect Your Network Devices — Without the Clutter The TP-Link TL-SG1005P is a compact, plug-and-play Gigabit switch designed for small offices, home networks, and security installations. With four PoE-enabled ports delivering up to 56W total, it powers IP cameras, VoIP phones, and wireless access points directly over a single Ethernet cable — no separate power adapters required. Key Features 5 × Gigabit RJ45 ports (10/100/1000Mbps) with auto-negotiation and auto MDI/MDIX 4 × PoE ports compliant with IEEE 802.3af/at — up to 15.4W per port 56W total PoE power budget across all ports 802.1p/DSCP QoS for smooth handling of latency-sensitive traffic IGMP Snooping for efficient multicast management Fanless, silent operation — ideal for office and residential environments Plug-and-play setup — no configuration or software required Compact desktop form factor (99.8 × 98 × 25 mm) Typical Use Cases IP Camera Systems: Power and connect up to 4 PoE IP cameras from a single switch — perfect for small CCTV installations. VoIP Phones: Deliver power and data to desk phones without additional power supplies. Wireless Access Points: Extend Wi-Fi coverage by powering PoE-capable APs directly. Small Office Networks: Expand wired connectivity for workstations, printers, and NAS devices. Home Networks: Tidy up your home setup with a single cable run to each device. Technical Specifications Specification Detail Model TL-SG1005P Ports 5 × 10/100/1000Mbps RJ45 PoE Ports Ports 1–4 (IEEE 802.3af/at) PoE Per Port Up to 15.4W Total PoE Budget 56W Switching Capacity 10 Gbps Packet Forwarding Rate 7.44 Mpps MAC Address Table 2K Jumbo Frame 16 KB Dimensions (W × D × H) 99.8 × 98 × 25 mm Weight 0.78 kg Power Supply External adapter — 53.5 VDC / 1.31A Max Power Consumption 4.29W (no PD) / 74.24W (full PoE load) Cooling Fanless Network Media Cat 3/4/5 (10M), Cat 5/5e (100M), Cat 5/5e/6+ (1000M) — max 100m QoS 802.1p / DSCP IGMP Snooping Supported Flow Control IEEE 802.3x Barcode 6935364083212 Frequently Asked Questions How many IP cameras can the TL-SG1005P power? Up to 4 PoE-powered devices can be connected on ports 1–4. The total PoE budget is 56W, so the number of cameras depends on each camera's power draw. Most standard IP cameras consume 5–12W, allowing you to run 4 cameras simultaneously with headroom to spare. Does this switch require any configuration? No. The TL-SG1005P is fully plug-and-play. Simply connect your devices and power on — no software, login, or setup is needed. Is it compatible with all PoE devices? It is compatible with IEEE 802.3af and 802.3at compliant powered devices (PDs). Always verify your device's PoE standard before connecting. Can I use it with non-PoE devices? Yes. All 5 ports support standard Gigabit data. Non-PoE devices connected to ports 1–4 will receive data only — no power will be supplied unless the device negotiates PoE. Is the TL-SG1005P suitable for outdoor use? No. This is a desktop switch designed for indoor use. For outdoor or harsh-environment installations, consider a ruggedised or weatherproof PoE switch. What is the warranty on this product in Australia? TP-Link products sold in Australia are covered by a standard manufacturer's warranty. Please refer to the TP-Link Australia warranty policy or contact us for details.

Read more less

TP-Link TL-SG1016PE 16-Port Gigabit PoE+ Switch Overview The TP-Link TL-SG1016PE is a reliable 16-port Gigabit desktop and rackmount switch designed for small-to-medium business networks and professional security installations. With 8 IEEE 802.3af/at compliant PoE+ ports and a 32Gbps backplane, it delivers both data and power over a single cable — ideal for IP cameras, access points, and VoIP phones across Australian commercial and residential sites. Key Features 16 x 10/100/1000Mbps RJ45 ports with Auto Negotiation and Auto MDI/MDIX 8 x PoE+ ports (IEEE 802.3af/at) — power IP cameras, APs, and VoIP devices without separate power adapters 32Gbps non-blocking backplane bandwidth for high-throughput environments 8K MAC address table with auto-learning and auto-aging Store-and-forward switching for reliable, error-free data transfer IEEE 802.3x flow control (full-duplex) and backpressure (half-duplex) Energy-efficient design — reduces power output by up to 75% on inactive ports Plug-and-play — no software configuration required Desktop or 1U rackmount installation flexibility Includes rackmount kit and rubber feet Use Cases CCTV & IP Camera Systems: Power and connect up to 8 PoE IP cameras directly from a single switch — no separate injectors needed. Small Business Networks: Expand office connectivity with Gigabit speeds across all 16 ports. Wireless Access Points: Deploy PoE-powered APs throughout a building without running additional power cabling. VoIP Deployments: Connect PoE-compatible IP phones alongside standard network devices on the same switch. Retail & Hospitality: Centralise network and power distribution in a compact 1U rackmount form factor. Specifications Specification Detail Total Ports 16 x 10/100/1000Mbps RJ45 PoE+ Ports 8 (IEEE 802.3af/at) Backplane Bandwidth 32 Gbps MAC Address Table 8K Buffer Size 1.5 Mbits Transfer Method Store-and-Forward Power Supply 100–240VAC, 50/60Hz Max Power Consumption (PoE on) 124.4W (220V/50Hz) Max Power Consumption (PoE off) 14.4W (220V/50Hz) Fan 1 x internal fan Dimensions (W × D × H) 294 × 180 × 44 mm Operating Temperature 0°C – 40°C Storage Temperature -40°C – 70°C Operating Humidity 10% – 90% (non-condensing) Certifications FCC, CE, RoHS SKU TL-SG1016PE Mounting Desktop / 1U Rackmount In the Box TL-SG1016PE Switch Power cord Rackmount kit Rubber feet Installation guide Frequently Asked Questions How many PoE devices can I connect to the TL-SG1016PE? Up to 8 PoE or PoE+ devices can be powered simultaneously via the dedicated PoE+ ports. The total PoE power budget is 110W, so ensure the combined power draw of connected devices does not exceed this limit. Does this switch require any software configuration? No. The TL-SG1016PE is a plug-and-play unmanaged switch. Simply connect your devices and cables — no login, software, or configuration is required. Can I rackmount this switch? Yes. The package includes a rackmount kit for standard 1U rack installation, as well as rubber feet for desktop use. Is this switch compatible with all PoE IP cameras? It is compatible with any IEEE 802.3af or 802.3at compliant PoE device, which covers the vast majority of IP cameras, wireless access points, and VoIP phones available in Australia. What cable type is required? For Gigabit speeds, use Cat 5e, Cat 6, or above UTP/STP cable up to 100 metres per run. Cat 3 or Cat 5 cable is sufficient for 10/100Mbps connections.

Read more less

TP-Link TL-SF1016 16-Port 10/100Mbps Rackmount Network Switch The TP-Link TL-SF1016 is a compact, fanless 16-port Fast Ethernet rackmount switch designed for small businesses, server rooms, and network infrastructure deployments across Australia. With 16 × 10/100Mbps RJ45 ports, auto MDI/MDIX on every port, and energy-efficient technology that reduces power consumption by up to 75%, it delivers reliable, low-maintenance network connectivity in a standard 19-inch 1U rack form factor — at an accessible price point. Key Features 16 × 10/100Mbps RJ45 Ports — Connects up to 16 wired devices simultaneously at Fast Ethernet speeds, suitable for office networks, IP cameras, VoIP phones, and access points. Plug & Play — No configuration, software, or management interface required — connect and the switch operates immediately. Auto MDI/MDIX on All Ports — Automatically detects and adjusts for straight-through or crossover cables, eliminating cable type concerns during installation. Fanless & Silent Operation — No moving parts means completely silent operation — ideal for office environments, comms rooms, and noise-sensitive installations. Energy-Efficient Technology — Reduces power consumption by up to 75% by detecting cable length and link status, and adjusting power output accordingly. Standard 19-Inch 1U Rackmount — Fits any standard 19-inch rack or cabinet; rackmount kit included in the box. Store-and-Forward Switching — Checks each packet for errors before forwarding, improving network reliability and reducing error propagation. 8K MAC Address Table — Supports up to 8,000 MAC address entries for efficient packet forwarding in larger network environments. Steel Enclosure — Robust all-metal construction for durability in rack and cabinet deployments. Use Cases Small business server rooms and comms cabinets requiring a cost-effective 16-port Fast Ethernet switch IP camera and NVR installations where 100Mbps per port is sufficient for camera bandwidth requirements Office networks connecting desktop PCs, VoIP phones, and access points to a central switch Expanding an existing network with additional ports without replacing the core infrastructure Education facilities, strata buildings, and small warehouses needing a simple, unmanaged rackmount switch Technical Specifications Specification Detail Model TL-SF1016 Ports 16 × 10/100Mbps RJ45 (Auto Negotiation, Auto MDI/MDIX) Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Switching Capacity 3.2Gbps Packet Forwarding Rate 2.38Mpps MAC Address Table 8K Buffer Memory 2MB Transfer Method Store-and-Forward Network Media 10BASE-T: Cat3/4/5 UTP (max 100m); 100BASE-TX: Cat5/5e or above (max 100m) Fan Fanless (silent operation) Power Supply 100–240V AC, 50/60Hz Max Power Consumption 2.23W (220V/50Hz) Energy Saving Up to 75% power reduction via cable length & link detection Form Factor 19-inch 1U Rackmount Dimensions 440 × 180 × 44 mm Operating Temperature 0°C to 40°C Certifications FCC, CE, RoHS In the Box Switch, power cord, rackmount kit, rubber feet, installation guide Warranty 2 Years Recommended Accessories TP-Link TL-POE260S 2.5G PoE+ Injector — Add PoE power to individual ports on this non-PoE switch for powering IP cameras or access points via a single cable. TP-Link TL-SM331T RJ45 SFP Module — If your core switch has an SFP uplink slot, use this copper SFP module to connect the TL-SF1016 via a standard Cat6 cable. Cat6 Ethernet Cable — Recommended for reliable 100Mbps connections at the full 100m distance across all 16 ports. 19-Inch Network Rack or Wall Cabinet — Required for rackmount installation; the TL-SF1016 fits any standard 19-inch 1U rack space. Frequently Asked Questions Is the TL-SF1016 a managed or unmanaged switch? The TL-SF1016 is an unmanaged switch. It requires no configuration, login, or management interface — simply connect your devices and it operates automatically. If you need VLANs, QoS, or port monitoring, consider TP-Link’s JetStream managed switch range. Does this switch support PoE? No. The TL-SF1016 does not provide Power over Ethernet. If you need to power IP cameras, access points, or VoIP phones via Ethernet, use a TP-Link PoE switch (such as the TL-SG108PE) or add a PoE injector (such as the TL-POE260S) to individual ports. Is 100Mbps per port sufficient for IP cameras? Yes, for most IP camera deployments. A typical 4MP or 8MP IP camera streams at 4–8Mbps, well within the 100Mbps capacity of each port. For high-density NVR systems with many high-bitrate cameras on a single uplink, a Gigabit switch may be more appropriate. Can I use Cat5e cable with this switch? Yes. The TL-SF1016 supports Cat5, Cat5e, and Cat6 UTP cable for 100BASE-TX operation at up to 100 metres. Cat5e or Cat6 is recommended for new installations. How loud is the switch in operation? The TL-SF1016 is completely fanless, meaning it produces no noise during operation. This makes it suitable for office environments, meeting rooms, and any installation where fan noise would be disruptive. Does the rackmount kit come included? Yes. The box includes the switch, power cord, rackmount kit (brackets and screws), rubber feet for desktop use, and an installation guide. No additional hardware is required for standard 19-inch rack installation.

Read more less

4-Port PoE with Smart Management in a Compact Gigabit Desktop Switch The TP-Link TL-SG108PE is an 8-port Gigabit Easy Smart switch that combines PoE power delivery with essential Layer 2 management features — VLAN, QoS, IGMP Snooping, and Port Mirroring — in a compact, fanless desktop form factor. With four 802.3af PoE ports and a 55W total budget, it powers IP cameras, access points, and VoIP phones while giving you the traffic control needed for a secure, well-organised small business or surveillance network. Managed via a web browser or the Easy Smart Configuration Utility, no advanced networking expertise is required. Key Features 4× PoE Ports (802.3af, Ports 1–4): Power IP cameras, wireless access points, VoIP phones, and other 802.3af-compliant devices at up to 15.4W per port via a single Ethernet cable. 55W Total PoE Budget: Supports up to four simultaneously powered PoE devices — sufficient for most small CCTV and Wi-Fi deployments. 8× Gigabit RJ45 Ports: Full 10/100/1000Mbps auto-negotiation on all ports for fast wired connectivity across all connected devices. VLAN Support (Port-based, 802.1Q, MTU): Segment camera traffic, staff devices, and guest networks onto separate logical networks for improved security and performance. QoS (Port-based & 802.1p): Prioritises latency-sensitive traffic such as IP camera streams and VoIP calls to ensure consistent performance under load. IGMP Snooping: Optimises multicast traffic for IP camera streams and IPTV, reducing unnecessary bandwidth consumption across the network. Port Mirroring: Mirror traffic from one port to another for network monitoring, diagnostics, and troubleshooting without disrupting live traffic. Web-Based Management: Configure and monitor via a web browser or the Easy Smart Configuration Utility — no CLI or advanced networking knowledge required. Fanless & Silent: Completely silent operation — suitable for offices, reception areas, and home installations. Plug & Play: Works out of the box for basic switching without any configuration — smart features are available when needed. Common Use Cases Powering and managing up to 4 IP cameras in small CCTV installations with VLAN isolation Connecting and powering Wi-Fi access points via PoE with guest VLAN separation Small business networks requiring both PoE and basic traffic management in one device VoIP phone deployments needing PoE power and QoS prioritisation for call quality Upgrading from an unmanaged PoE switch to gain VLAN and QoS control Technical Specifications Model TL-SG108PE Total Ports 8× 10/100/1000Mbps RJ45 PoE Ports 4× (Ports 1–4), IEEE 802.3af Max PoE Per Port 15.4W (802.3af) Total PoE Budget 55W Switching Capacity 16 Gbps Packet Forwarding Rate 11.9 Mpps MAC Address Table 4K Packet Buffer Memory 1.5 Mbit VLAN Port-based, 802.1Q Tag VLAN, MTU VLAN QoS Port-based & 802.1p tag-based IGMP Snooping Yes Port Mirroring Yes Flow Control IEEE 802.3x Management Web UI, Easy Smart Configuration Utility Fan Fanless (silent) Power Supply External adapter — 48V DC / 1.25A Max Power Consumption 5.2W (no PD) / 65.2W (full PoE load) Form Factor Desktop Weight 840g Frequently Asked Questions What is the difference between the TL-SG108PE and the TL-SG1008P? Both are 8-port Gigabit switches with 4 PoE ports. The TL-SG1008P is fully unmanaged — plug-and-play with no configuration options. The TL-SG108PE adds web-based management with VLAN, QoS, IGMP Snooping, and Port Mirroring, making it significantly more capable for business and surveillance networks that require traffic control and segmentation. Does the TL-SG108PE support PoE+ (802.3at)? No. The TL-SG108PE supports IEEE 802.3af (PoE) only, providing up to 15.4W per port. It does not support 802.3at (PoE+). Ensure your powered devices are 802.3af-compliant before purchasing. For PoE+ devices requiring up to 30W, consider the TL-SG1210MP or TL-SF1009P. How many PoE devices can I connect? Up to 4 PoE devices can be connected via ports 1–4. The total shared PoE budget is 55W. For example, four cameras drawing 12W each would use 48W — within the 55W budget. Ports 5–8 are standard Gigabit ports with no PoE capability. Is it suitable for IP camera and CCTV networks? Yes. The TL-SG108PE powers up to four 802.3af IP cameras directly via PoE, and VLAN support lets you isolate camera traffic from your main network for improved security. IGMP Snooping also helps manage multicast video streams efficiently. What is an Easy Smart switch? Easy Smart is TP-Link's simplified management tier — it provides a web-based interface for configuring VLANs, QoS, IGMP Snooping, and Port Mirroring without the complexity of a fully managed switch. It's ideal for small business owners and installers who need more control than an unmanaged switch but don't require enterprise-level CLI management. Can I use it without any configuration? Yes. The TL-SG108PE works as a standard plug-and-play switch out of the box — all devices connected will communicate normally without any setup. Smart features such as VLAN and QoS are only applied when you choose to configure them via the web interface.

Read more less

Next-Generation Wi-Fi 6 Speed and Coverage for the Whole HomeThe TP-Link Archer AX72 is an AX5400 dual-band Wi-Fi 6 router built for households that demand fast, reliable wireless connectivity across multiple devices. With combined speeds of up to 5400 Mbps, support for 200+ simultaneous connections, and TP-Link HomeShield security, the AX72 is a significant upgrade for any home or small office network on NBN or fibre.Key Features AX5400 Wi-Fi 6 — 4804 Mbps on 5 GHz (HE160) + 574 Mbps on 2.4 GHz for combined speeds up to 5400 Mbps 4T4R + HE160 — top-tier Wi-Fi 6 structure for maximum 5 GHz throughput and range MU-MIMO & OFDMA — simultaneously serves multiple devices, reducing congestion and quadrupling average throughput Connect 200+ Devices — ideal for smart homes with many concurrent Wi-Fi clients 6× Fixed High-Performance Antennas — with Beamforming to concentrate signal towards connected devices HomeShield Security — TP-Link’s premium network and IoT protection suite, including parental controls and real-time threat detection 1× USB 3.0 Port — share storage devices or build a private cloud across your network DFS Support — accesses additional 5 GHz channels to reduce wireless congestion Easy Setup — configure in minutes via the TP-Link Tether app Typical Use Cases High-speed NBN or fibre home networking for 3-bedroom houses and larger 4K/8K streaming and online gaming with low latency Smart home hubs managing 50+ IoT devices simultaneously Home offices requiring fast, stable Wi-Fi for video conferencing and large file transfers USB network-attached storage (NAS) for media sharing across the home Technical Specifications Specification Detail Model Archer AX72 Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a 5GHz, 802.11ax/n/b/g 2.4GHz) Wi-Fi Speed AX5400: 4804 Mbps (5GHz, HE160) + 574 Mbps (2.4GHz) Antennas 6× Fixed High-Performance External Antennas MIMO 4×4 MU-MIMO OFDMA Supported (2.4GHz & 5GHz) WAN Port 1× Gigabit WAN LAN Ports 4× Gigabit LAN USB 1× USB 3.0 Operating Modes Router Mode, Access Point Mode Security WPA/WPA2/WPA3, HomeShield, SPI Firewall, Guest Network Management TP-Link Tether App, Web Interface Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Is the Archer AX72 compatible with Australian NBN connections? Yes. The AX72 supports PPPoE, Dynamic IP, and Static IP WAN types, covering all NBN connection methods including FTTP, FTTC, FTTN, and HFC. Connect it directly to your NBN modem or gateway via the Gigabit WAN port. What is the difference between Wi-Fi 6 and Wi-Fi 5 (AC)? Wi-Fi 6 (802.11ax) delivers faster speeds, lower latency, and significantly better performance in environments with many connected devices compared to Wi-Fi 5 (802.11ac). Technologies like OFDMA and MU-MIMO allow the AX72 to serve multiple devices simultaneously rather than sequentially. Do I need Wi-Fi 6 devices to benefit from the Archer AX72? No. The AX72 is backwards compatible with Wi-Fi 5, Wi-Fi 4, and older devices. However, the full speed and efficiency benefits of Wi-Fi 6 are only realised when connecting Wi-Fi 6-capable devices. What is HomeShield and is it free? HomeShield is TP-Link’s network security platform offering parental controls, IoT device protection, and real-time threat detection. Basic features are free; advanced features require a HomeShield Pro subscription. Can I use the USB 3.0 port for network storage? Yes. You can connect a USB hard drive or flash drive to the USB 3.0 port and share it across your network as a basic NAS (Network Attached Storage) device, accessible via the Tether app or web interface.

Read more less

TP-Link TX432 – 10-Gigabit 2-Port SFP+ Expansion Module The TP-Link TX432 is a 10-Gigabit expansion module that adds two SFP+ ports to compatible TP-Link managed switches. Designed for network engineers and installers who need high-speed uplinks or inter-switch connections, the TX432 supports a wide range of TP-Link SFP+ transceivers and direct-attach cables (DAC), making it a flexible and cost-effective way to scale 10G connectivity within an existing TP-Link switch infrastructure. Key Features 2 × 10G SFP+ Slots: Adds two 10-Gigabit SFP+ ports to compatible TP-Link switch models for high-speed uplinks or stacking connections. Broad TP-Link Compatibility: Applicable to multiple TP-Link switch models — check TP-Link’s compatibility list to confirm support for your specific switch. SFP+ Transceiver & DAC Cable Support: Works with TP-Link SFP+ optical transceivers (single-mode and multi-mode) and SFP+ direct-attach copper (DAC) cables for flexible deployment. IEEE 802.3ae / 802.3aq Compliant: Meets industry-standard 10GBase-SR, 10GBase-LR, and 10GBase-LRM specifications. Low Power Consumption: Maximum 6.57W with fibre transceiver installed — efficient for always-on network infrastructure. Compact Form Factor: 131 × 92 × 31mm module slots directly into the switch expansion bay without additional mounting hardware. Ideal Use Cases Adding 10G fibre uplinks to TP-Link managed switches for high-bandwidth inter-switch connections. Connecting a TP-Link switch to a 10G core switch or router via SFP+ DAC cable or fibre transceiver. Expanding network capacity in surveillance installations where high-volume IP camera traffic requires 10G backbone links. Data centre and server room environments requiring 10G connectivity between access and distribution layer switches. Upgrading existing TP-Link switch deployments to 10G without replacing the entire switch. Technical Specifications Specification Detail Model TX432 SFP+ Ports 2 × 10G SFP+ Standards IEEE 802.3ae, IEEE 802.3aq, SFF-8431 Max Power Consumption 6.57W (with fibre transceiver) LED Indicators M1, M2 (per port) Dimensions 131 × 92 × 31 mm Operating Temperature 0°C – 50°C Storage Temperature −40°C – 70°C Operating Humidity 10% – 90% RH (non-condensing) Storage Humidity 5% – 90% RH (non-condensing) Certifications FCC, CE Weight 0.32kg SKU TX432 Barcode (EAN) 6935364021917 Compatibility Note The TX432 is designed for use with specific TP-Link switch models that include an expansion module bay. Always verify compatibility with your switch model on TP-Link’s official compatibility list before purchasing. SFP+ transceivers and DAC cables are sold separately. Frequently Asked Questions Which TP-Link switches are compatible with the TX432? The TX432 is applicable to multiple TP-Link switch models with an expansion module slot. Compatibility varies by switch model and firmware version. Refer to TP-Link’s official TX432 product page or contact CCTV Guru for compatibility confirmation before ordering. Do I need to purchase SFP+ transceivers separately? Yes. The TX432 module provides the SFP+ slots; SFP+ transceivers (such as single-mode or multi-mode fibre modules) and DAC cables are sold separately. TP-Link offers a range of compatible SFP+ transceivers to suit different distance and media requirements. Can I use third-party SFP+ transceivers with the TX432? TP-Link recommends using TP-Link-branded SFP+ transceivers for guaranteed compatibility and support. Third-party transceivers may work but are not officially supported and could affect performance or warranty coverage. What is the maximum 10G link distance supported? Link distance depends on the SFP+ transceiver used. Common options include: up to 300m with multi-mode fibre (10GBase-SR), up to 10km with single-mode fibre (10GBase-LR), and up to 7m with SFP+ DAC cables. Refer to the transceiver datasheet for exact specifications. Is the TX432 hot-swappable? Hot-swap capability depends on the host switch model. Refer to your switch’s documentation to confirm whether the expansion module bay supports hot-swapping without a reboot. Is this module suitable for IP camera network backbones? Yes. In large-scale IP camera deployments where multiple switches aggregate high-bandwidth camera traffic, 10G uplinks via the TX432 prevent bottlenecks between access-layer and core switches — particularly in installations with 4K or multi-megapixel cameras.

Read more less

TP-Link MC100CM Media Converter – 100Mbps RJ45 to Multi-Mode SC Fibre | 2km Overview The TP-Link MC100CM is a compact and reliable media converter that bridges 100Mbps copper (RJ45) and multi-mode SC fibre networks over distances of up to 2km. Operating at 1310nm on both transmit and receive, it complies with IEEE 802.3u standards and supports both standalone desktop deployment and rack-mounted operation via TP-Link’s 19" chassis system. With Auto MDI/MDIX on the RJ45 port and Link Fault Passthrough for rapid fault detection, it is a straightforward, cost-effective solution for extending copper Ethernet over existing multi-mode fibre infrastructure in Australian commercial, industrial, and campus environments. Key Features 100Mbps RJ45 to Multi-Mode SC Fibre Conversion – Seamlessly converts between 10/100Base-TX copper Ethernet and 100Base-FX multi-mode fibre. Up to 2km Fibre Range – Extends your network over multi-mode fibre for building-to-building or campus links up to 2 kilometres. 1310nm Wavelength – Standard dual-fibre operation (Tx and Rx both at 1310nm); compatible with standard multi-mode SC patch leads and infrastructure. Standalone or Chassis-Mountable – Operates as a standalone desktop unit or slots into TP-Link’s 19" media converter chassis for rack-mounted, multi-port deployments. IEEE 802.3u Compliant – Meets 10/100Base-TX and 100Base-FX standards for reliable interoperability. Link Fault Passthrough & Far End Fault – Detects and passes through link failures promptly to minimise downtime. Auto MDI/MDIX on RJ45 Port – Eliminates the need for crossover cables on the copper side. Half/Full-Duplex Support – Full duplex flow control (IEEE 802.3x) and half duplex backpressure on the fibre port. LED Status Indicators – PWR, FDX/Col, Link/Act, and SPD LEDs for quick visual diagnostics. Use Cases Extending copper Ethernet over existing multi-mode fibre infrastructure between buildings or floors CCTV and IP camera backhaul over multi-mode fibre runs up to 2km Campus and industrial networks requiring interference-free fibre connectivity Rack-mounted multi-port fibre conversion deployments using TP-Link chassis Cost-effective fibre extension where multi-mode infrastructure is already installed Technical Specifications Specification Details Model MC100CM Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x RJ45 Port 1 × 100Mbps RJ45 (Auto MDI/MDIX) Fibre Port 1 × 100Mbps SC/UPC Multi-Mode Wavelength 1310nm (Tx & Rx) Fibre Type Multi-Mode (OM1/OM2) Max Fibre Distance Up to 2km Copper Cable Support Cat3/4/5 UTP or 100Ω STP (max 100m) Duplex (Fibre Port) Half / Full Duplex Flow Control IEEE 802.3x (Full) / Backpressure (Half) LED Indicators PWR, FDX/Col, Link/Act, SPD Dimensions 94.5 × 73.0 × 27.0mm Mounting Standalone Desktop or TP-Link 19" Chassis Power Supply External Power Adapter Frequently Asked Questions What is the difference between the MC100CM and the MC112CS? The MC100CM uses multi-mode fibre with a standard dual-fibre SC connection (Tx and Rx both at 1310nm) and supports distances up to 2km. The MC112CS uses single-mode fibre with WDM technology (single fibre strand) and supports distances up to 20km. Choose the MC100CM when you have existing multi-mode fibre infrastructure; choose the MC112CS for longer single-mode fibre runs. Can the MC100CM be rack-mounted? Yes. The MC100CM is chassis-mountable and slots into TP-Link’s 19" media converter chassis, allowing multiple converters to be installed in a rack for organised, multi-port fibre conversion deployments. It also operates as a standalone desktop unit without a chassis. What type of fibre cable does the MC100CM use? The MC100CM uses multi-mode fibre (OM1 or OM2) with an SC/UPC connector. It requires two fibre strands — one for transmit and one for receive — unlike WDM converters that use a single strand. Ensure your existing fibre infrastructure uses multi-mode cable before purchasing. Can I use the MC100CM for CCTV or IP camera backhaul? Yes. The MC100CM is well-suited for extending IP camera and CCTV network connections over existing multi-mode fibre runs, particularly between buildings or across large sites where copper Ethernet distances are insufficient. What is the maximum copper cable length on the RJ45 side? The RJ45 port supports standard Ethernet copper cable up to 100 metres using Cat3, Cat4, or Cat5 UTP, or 100Ω STP cabling. Does the MC100CM require a chassis to operate? No. The MC100CM operates as a fully standalone desktop unit with its own external power adapter. The chassis is optional and used only when rack-mounting multiple converters together. Installer Note: The MC100CM requires two fibre strands (one Tx, one Rx) at 1310nm. It is not a WDM single-fibre device. Confirm your fibre patch leads and infrastructure are multi-mode SC/UPC before installation. If you need single-fibre WDM operation or distances beyond 2km, consider the TP-Link MC112CS (single-mode, 20km) instead.

Read more less

Extend Your Fibre Network Up to 20km with the TP-Link MC110CS The TP-Link MC110CS is a compact, reliable single-mode media converter that bridges 100BASE-FX fibre and 100Base-TX copper networks at full wire speed. Whether you're connecting remote buildings, extending an existing fibre run, or integrating legacy copper infrastructure, the MC110CS delivers a seamless, standards-compliant solution — no chassis required. Description Designed to IEEE 802.3u standards, the MC110CS operates at 1310nm on both transmit and receive paths, supporting longwave (LX) laser specification. It accepts single-mode fibre via an SC-type connector and auto-negotiates duplex mode on the copper TX port. The unit can be deployed as a standalone device or installed into a TP-Link 19" system chassis for rack-mounted environments. Key Features Converts 100BASE-FX fibre to 100Base-TX copper (and vice versa) Single-mode fibre with SC-type connector Extends fibre distance up to 20 kilometres Operates at 1310nm wavelength (longwave LX) Full wire speed forwarding — no throughput bottleneck Auto MDI/MDI-X on TX port — no crossover cable needed Auto-negotiation of duplex mode on TX port Front panel status LEDs for quick diagnostics Standalone or 19" chassis-compatible deployment Compliant with IEEE 802.3u 10/100Base-TX and 100Base-FX standards Use Cases Campus and multi-building networks — connect buildings separated by up to 20km over single-mode fibre Industrial and commercial installations — integrate copper-based switches or NVRs into fibre backbone runs Security and surveillance systems — extend IP camera feeds over fibre where copper distance limits apply ISP and telco edge deployments — bridge fibre last-mile connections to copper customer premises equipment Rack-mounted environments — deploy in TP-Link chassis for centralised, managed media conversion Specifications Specification Detail Model MC110CS Standards IEEE 802.3u 10/100Base-TX, 100Base-FX Fibre Type Single-mode Connector Type SC Wavelength 1310nm (TX & RX) Laser Specification Longwave (LX) Max Fibre Distance Up to 20km TX Port Auto MDI/MDI-X, Auto-negotiation (duplex) Forwarding Rate Full wire speed Deployment Standalone or 19" TP-Link chassis Indicators Front panel status LEDs SKU / Barcode MC110CS / 6935364030407 Vendor TP-Link Weight 0.34g Frequently Asked Questions What type of fibre cable does the MC110CS use? The MC110CS uses single-mode fibre with an SC-type connector. It is not compatible with multi-mode fibre. Does the MC110CS require a chassis to operate? No. It can be used as a standalone device. It is also compatible with TP-Link's 19" system chassis for rack-mounted deployments. What is the maximum fibre distance supported? The MC110CS supports single-mode fibre runs of up to 20 kilometres. Does it support auto-negotiation? Yes. The TX (copper) port supports auto-negotiation of duplex mode and Auto MDI/MDI-X, so no crossover cable is required. What wavelength does the MC110CS operate at? It operates at 1310nm on both transmit and receive, using a longwave (LX) laser specification. Is this product suitable for CCTV and IP camera installations? Yes. The MC110CS is well-suited for extending IP camera feeds over single-mode fibre where copper distance limits are exceeded. Does CCTV Guru ship this product Australia-wide? Yes. The MC110CS is stocked locally and ships Australia-wide.

Read more less

TP-Link MC220L Gigabit SFP Media Converter Flexible Gigabit fibre conversion with the freedom of SFP. The TP-Link MC220L bridges a 10/100/1000Mbps copper RJ45 network to a Gigabit fibre link using a standard SFP (mini-GBIC) module — giving you the flexibility to choose your fibre type and distance by simply swapping the SFP. It supports both multi-mode fibre (up to 0.55km) and single-mode fibre (up to 10km), making it a versatile fit for building-to-building links, campus networks, and data centre interconnects. Key Features 1 × 10/100/1000Mbps RJ45 copper port with Auto-Negotiation and Auto MDI/MDIX 1 × SFP (mini-GBIC) slot — accepts standard SFP modules for flexible fibre type selection Supports multi-mode fibre up to 0.55km and single-mode fibre up to 10km (SFP-dependent) Compliant with IEEE 802.3ab (1000Base-T) and IEEE 802.3z (1000Base-SX/LX) Hot-swappable SFP slot — replace or upgrade the SFP module without powering down Compatible with TP-Link TL-MC1400 media converter chassis for rack-based deployments Standalone desktop operation or chassis-mounted use Use Cases Connecting Gigabit copper network equipment over fibre between buildings or floors Campus and enterprise network fibre backbone interconnects Data centre fibre-to-copper conversion at the server or switch edge Surveillance and IP camera networks requiring long-distance Gigabit fibre runs Rack-based deployments using the TP-Link TL-MC1400 chassis Specifications Specification Detail Model MC220L Standards IEEE 802.3ab (1000Base-T), IEEE 802.3z (1000Base-SX/LX) Copper Port 1 × 10/100/1000Mbps RJ45 (Auto-Negotiation, Auto MDI/MDIX) Fibre Port 1 × SFP (mini-GBIC) slot Multi-Mode Fibre Distance Up to 0.55km Single-Mode Fibre Distance Up to 10km SFP Hot-Swappable Yes Deployment Standalone or TL-MC1400 chassis Weight 520 g SKU MC220L Vendor TP-Link Recommended Accessories TP-Link TL-SM311LM SFP Module — multi-mode SFP for 550m fibre links (LC connector) TP-Link TL-SM311LS SFP Module — single-mode SFP for 10km fibre links (LC connector) TP-Link TL-MC1400 Media Converter Chassis — for rack-based, high-density deployments LC-LC or LC-SC fibre patch cables — to connect the SFP module to your fibre infrastructure Frequently Asked Questions Does the MC220L come with an SFP module included? No. The MC220L is sold without an SFP module. You will need to purchase a compatible SFP separately based on your fibre type (multi-mode or single-mode) and required distance. TP-Link TL-SM311LM (multi-mode) and TL-SM311LS (single-mode) are compatible options. What fibre connector type does the MC220L use? The connector type depends on the SFP module installed. Most standard Gigabit SFP modules use an LC duplex connector. Always confirm the connector type of your chosen SFP before purchasing fibre patch cables. Can I use third-party SFP modules with the MC220L? The MC220L is designed for use with TP-Link SFP modules. Compatibility with third-party SFPs is not guaranteed. For reliable operation, TP-Link-branded SFP modules are recommended. Can the MC220L be installed in the TL-MC1400 chassis? Yes. The MC220L is compatible with the TP-Link TL-MC1400 14-slot rackmount chassis, allowing centralised, rack-based deployment alongside other TP-Link MC series converters. What is the difference between multi-mode and single-mode fibre? Multi-mode fibre (MMF) supports shorter distances (up to 0.55km with this converter) and is typically used within buildings or between nearby structures. Single-mode fibre (SMF) supports longer distances (up to 10km) and is used for building-to-building or campus-wide links. The MC220L supports both — the SFP module you install determines which type is used. Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

TP-Link MC210CS Gigabit Single-Mode Media Converter The TP-Link MC210CS converts Gigabit Ethernet copper (RJ45) to 1000BASE-LX single-mode fibre (SC connector) — and back again — extending your network up to 15km over a single-mode fibre run. It operates at full wire speed in full-duplex mode and works as a standalone desktop unit or slots into TP-Link’s 19-inch media converter chassis for rack-based deployments. Key Features Converts 1000BASE-T copper (RJ45) to 1000BASE-LX/LH single-mode fibre (SC/UPC) and vice versa Extends fibre distance up to 15km over 9/125μm single-mode fibre 1000Mbps full-duplex operation on both TX (copper) and FX (fibre) ports 1310nm wavelength on both transmit and receive Auto MDI/MDIX on RJ45 port — no crossover cables required Force/Auto transfer mode switch for the FX fibre port Standalone desktop use or compatible with TP-Link 19-inch chassis (no chassis required) Front-panel LED indicators: PWR, LINK, RX for at-a-glance status monitoring IEEE 802.3ab, 802.3z, and 802.3x compliant FCC, CE, and RoHS certified Use Cases Building-to-building links — bridge copper LAN infrastructure between separate structures over existing single-mode fibre runs up to 15km Security and surveillance networks — extend Gigabit connectivity from a central NVR or switch to remote camera clusters across a campus or industrial site ISP and telco last-mile — convert fibre feeds to copper for customer-premises equipment where fibre termination is not available Rack deployments — slot into a TP-Link chassis for high-density, managed media conversion in a comms room or data centre Specifications Specification Detail Model MC210CS Standards IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Copper Port 1 x 1000M RJ45 (Auto MDI/MDIX) Fibre Port 1 x 1000M SC/UPC Wavelength 1310nm (TX and RX) Fibre Type 1000BASE-FX Single-Mode Fibre (SMF) Max. Fibre Distance 15km Max. Copper Distance 100m (Cat5/5e UTP or 100Ω STP) Transfer Mode Full Duplex, Flow Control (IEEE 802.3x) LED Indicators PWR, LINK, RX Power Supply External power adapter Max. Power Consumption 5.5W Dimensions (W × D × H) 94.5 × 73.0 × 27.0mm Operating Temperature 0–40°C Storage Temperature -40–70°C Operating Humidity 10–90% RH, Non-Condensing Certifications FCC, CE, RoHS SKU / Barcode MC210CS / 1210002611053 Weight 0.36kg Frequently Asked Questions What type of fibre cable does the MC210CS require? The MC210CS requires 9/125μm single-mode fibre (SMF) with SC/UPC connectors. It is not compatible with multi-mode fibre or LC-terminated cables without an adapter. Does it need a chassis, or can it run standalone? It runs perfectly as a standalone desktop unit using the included external power adapter. It can also be installed into a TP-Link 19-inch media converter chassis for rack-based deployments — no chassis is required for standalone use. What is the maximum copper cable length? The RJ45 copper port supports up to 100m using Cat5, Cat5e UTP, or 100Ω STP cabling — standard for Gigabit Ethernet copper runs. Can I use the MC210CS with any Gigabit switch? Yes. The RJ45 port is standard 1000BASE-T and connects to any Gigabit Ethernet switch or NIC. Auto MDI/MDIX means straight-through or crossover cables both work. What does the Force/Auto switch on the FX port do? The FX port has a physical switch to set the fibre link to Auto-negotiation or Force mode. Force mode is useful when connecting to devices that do not support auto-negotiation on the fibre side, ensuring a stable link is established. Does it ship Australia-wide? Yes. CCTV Guru ships the MC210CS Australia-wide from local stock.

Read more less

TP-Link MC200CM Gigabit Multi-Mode Media Converter The TP-Link MC200CM converts Gigabit Ethernet copper (RJ45) to 1000BASE-SX multi-mode fibre (SC connector) — and back again — extending your network up to 550m over 50/125μm or 62.5/125μm multi-mode fibre. Operating at 850nm, it is the ideal companion for short-range fibre runs within a building or between adjacent structures, and works as a standalone desktop unit or slots into a TP-Link 19-inch media converter chassis. Key Features Converts 1000BASE-T copper (RJ45) to 1000BASE-SX multi-mode fibre (SC connector) and vice versa Extends fibre distance up to 550m over 50/125μm MMF (up to 275m over 62.5/125μm MMF) 850nm wavelength — standard for multi-mode Gigabit fibre links SC duplex connector — widely used in structured cabling and patch panel environments Force/Auto transfer mode switch for the FX fibre port — ensures link stability with non-auto-negotiating devices IEEE 802.3ab (1000BASE-T) and IEEE 802.3z (1000BASE-SX) compliant Standalone desktop use or compatible with TP-Link 19-inch media converter chassis Front-panel LED indicators for at-a-glance link and power status FCC, CE, and RoHS certified Use Cases Intra-building fibre links — connect floors or wings of a building over existing multi-mode fibre infrastructure without replacing copper switches Security and surveillance networks — extend Gigabit connectivity from a central NVR or switch to remote camera clusters within a campus or large facility Data centre and server room uplinks — short-range MMF is common in structured cabling environments; the MC200CM bridges copper-only equipment to fibre backbone runs Rack deployments — slot into a TP-Link chassis for high-density media conversion in a comms room alongside other converter modules Specifications Specification Detail Model MC200CM Standards IEEE 802.3ab (1000BASE-T), IEEE 802.3z (1000BASE-SX) Copper Port 1 x 1000M RJ45 (Auto MDI/MDIX) Fibre Port 1 x 1000M SC Duplex Wavelength 850nm Fibre Type Multi-Mode Fibre (MMF) Max. Fibre Distance 550m (50/125μm MMF) / 275m (62.5/125μm MMF) Max. Copper Distance 100m (Cat5/5e UTP) FX Transfer Mode Force / Auto (switchable) Chassis Compatible Yes — TP-Link 19-inch media converter chassis Weight 0.44kg Certifications FCC, CE, RoHS SKU / Barcode MC200CM / 1210002611039 MC200CM vs MC210CS — Which Do I Need? MC200CM MC210CS Fibre Type Multi-Mode (MMF) Single-Mode (SMF) Max. Distance 550m 15km Wavelength 850nm 1310nm Best For Within a building or campus Between buildings or long runs Frequently Asked Questions What type of fibre cable does the MC200CM require? The MC200CM requires multi-mode fibre (MMF) with SC duplex connectors. It supports 50/125μm MMF (up to 550m) and 62.5/125μm MMF (up to 275m). It is not compatible with single-mode fibre — if you need single-mode or longer distances, see the MC210CS. What is the difference between multi-mode and single-mode fibre? Multi-mode fibre (MMF) uses a larger core diameter and is suited to short distances — typically within a building or campus up to around 550m at Gigabit speeds. Single-mode fibre (SMF) uses a smaller core and supports much longer distances (up to 15km or more). If your fibre run is under 550m and uses orange or aqua OM-type cable, it is likely multi-mode. Does it need a chassis, or can it run standalone? It runs as a standalone desktop unit using its included external power adapter. It can also be installed into a TP-Link 19-inch media converter chassis for rack-based deployments — no chassis is required for standalone use. What does the Force/Auto switch on the FX port do? The FX port has a physical switch to set the fibre link to Auto-negotiation or Force mode. Force mode is useful when connecting to devices that do not support auto-negotiation on the fibre side, ensuring a stable link is established regardless of the remote device’s capabilities. Can I use the MC200CM with any Gigabit switch? Yes. The RJ45 copper port is standard 1000BASE-T and connects to any Gigabit Ethernet switch or NIC. Auto MDI/MDIX means straight-through or crossover cables both work without adapters. Does it ship Australia-wide? Yes. CCTV Guru ships the MC200CM Australia-wide from local stock.

Read more less

TP-Link SM311LS 1000Base-LX SFP Single-Mode LC Transceiver (10km) Gigabit Single-Mode Fibre Connectivity Up to 10km The TP-Link SM311LS is a 1000Base-LX SFP (Mini-GBIC) transceiver module designed for Gigabit Ethernet connections over single-mode fibre at distances up to 10km. Operating at 1310nm and compliant with IEEE 802.3z, it is hot-pluggable and compatible with TP-Link JetStream and Smart switches, as well as any SFP MSA-compliant device. An essential component for inter-building fibre links, campus networks, and long-distance switch uplinks across Australian commercial and enterprise installations. Key Features 1000Base-LX — Gigabit Ethernet over single-mode fibre at up to 10km 1310nm wavelength — standard for single-mode long-range fibre applications LC/UPC duplex connector — industry-standard fibre interface IEEE 802.3z compliant — interoperable with standard Gigabit fibre infrastructure SFP MSA compliant — compatible with any MSA-standard SFP port Hot-pluggable — insert or remove without powering down the switch Compatible with TP-Link JetStream and Smart switches including TL-SG3210, TL-SG3216, TL-SG3424, TL-SG2210P, TL-SG2216, TL-SG2424, TL-SG2452, MC220L, and more Use Cases Inter-Building Fibre Links: Connect switches across separate buildings on a campus or commercial site using existing single-mode fibre infrastructure up to 10km. Switch Uplinks: Provide Gigabit fibre uplinks between access and distribution layer switches in enterprise or commercial network deployments. IP Surveillance Backbones: Deliver reliable Gigabit fibre connectivity between NVRs, PoE switches, and core switches across large sites. Network Upgrades: Add fibre uplink capability to existing TP-Link managed switches without replacing the switch hardware. Long-Distance Connections: Suitable for any application requiring Gigabit connectivity beyond the 100m limit of copper Ethernet cabling. Specifications Specification Detail Model SM311LS Standard 1000Base-LX (IEEE 802.3z) Data Rate 1 Gbps (1000 Mbps) Wavelength 1310 nm Fibre Type Single-mode (9/125 µm) Max Cable Length 10km Connector LC/UPC duplex Form Factor SFP (Mini-GBIC) Hot-Pluggable Yes MSA Compliance SFP MSA Weight 0.06 kg Compatible TP-Link Switches The SM311LS is compatible with the following TP-Link switch models (and any other SFP MSA-compliant device): TL-SG3210, TL-SG3216, TL-SG3424, TL-SG3424P TL-SG2210P, TL-SG2216, TL-SG2424, TL-SG2424P, TL-SG2452 TL-SL3428, TL-SL3452, TL-SL2210, TL-SL2218, TL-SL2428, TL-SL2452 TL-SG5412F, TL-SG5428, TL-SL5428E T3700G-28TQ, MC220L Frequently Asked Questions What is the difference between 1000Base-LX and 1000Base-SX? 1000Base-LX (Long-range) uses 1310nm wavelength and single-mode fibre for distances up to 10km. 1000Base-SX (Short-range) uses 850nm wavelength and multi-mode fibre for distances up to 550m (OM3). Use the SM311LS where your fibre runs exceed 550m or where single-mode fibre is already installed. What fibre cable do I need? The SM311LS requires single-mode fibre (9/125 µm) with LC/UPC duplex connectors. Multi-mode fibre is not compatible with this module. Ensure both ends of the fibre link use the same connector type and polish (UPC or APC). Is the SM311LS compatible with non-TP-Link switches? Yes. The SM311LS is SFP MSA compliant and is designed to work in any switch or device with a standard SFP port. Compatibility with specific third-party switches may vary — check your switch vendor’s compatibility list or test in your environment. Can I hot-swap the transceiver without rebooting the switch? Yes. The SM311LS is hot-pluggable and can be inserted or removed while the switch is powered on without disrupting other ports or requiring a reboot. Do I need one or two SM311LS modules for a fibre link? You need one SM311LS module at each end of the fibre link — one installed in each switch. A single module only provides one end of the connection.

Read more less

Steel corner mount for all PTZ cameras

Read more less

The EdgeRouter™ X SFP features five independent, Gigabit RJ45 ports and one Gigabit SFP port – all six are configurable for switching. The Gigabit SFP port provides fiber connectivity to support backhaul applications for carrier-class networks. Centralized Management The EdgeRouter™ is supported and managed by UNMS™ (Ubiquiti® Network Management System), a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.

Read more less

Ubiquiti LiteBeam AC 16dBi 90 deg 5GHz 802.11ac Antenna with GPS Sync and Management RadioThe Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Hardware Overview The LiteAP AC delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor. Quick Installation Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting. Versatile Mounting The ball-joint mount of the LiteAP AC provides adjustment flexibility for versatile mounting options. Efficient Design The LiteAP AC features a lightweight antenna with an integrated radio in a sleek design. Gigabit Ethernet The LiteAP AC delivers high throughput over its wired connection

Read more less

LiteBeam 5AC radio with built-in 120 Degree 16dBi Sector. 2 x 2 MIMOThe LiteBeam™ is the latest evolution of a lightweight and compact, outdoor wireless broadband product from Ubiquiti Networks. Each of these models was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. It operates in the worldwide 5 GHz frequency range with high-performance speeds.The LiteBeam combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value.

Read more less

Ubiquiti POE Injector, 24VDC 1A , 24W Features earth grounding/ESD Gigabit Lan Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors

Read more less

The Ubiquiti UniFi U6 Pro is a ceiling-mounted WiFi 6 access point engineered for high-density environments — large offices, open-plan workspaces, and enterprise deployments where reliable, fast wireless is non-negotiable. With an aggregate throughput of 5.3 Gbps and support for 300+ concurrent clients, the U6 Pro delivers the kind of wireless performance that keeps your team productive and your network stable. Why Choose the UniFi U6 Pro? 🚀 WiFi 6 (802.11ax) — next-generation wireless standard for faster speeds and lower latency 📡 5.3 Gbps aggregate throughput — 5 GHz @ 4.8 Gbps (4x4 MIMO) + 2.4 GHz @ 573.5 Mbps (2x2 MIMO) 👥 300+ concurrent clients — ideal for busy offices and high-density deployments 🔒 Guest network isolation — keep guest traffic separate for security and performance 📶 160 MHz channels — full 4x4 MIMO for high-capacity wireless uplinks ⚡ PoE-powered — single GbE RJ45 port (PoE In), clean cable-free ceiling install 🛠️ UniFi Network app managed — set up in minutes, managed centrally via software Technical Specifications Model U6-PRO WiFi Standard WiFi 6 (802.11ax) Bands Dual-Band (2.4 GHz + 5 GHz) Max Throughput 5.3 Gbps aggregate 5 GHz 4.8 Gbps (4x4 MU-MIMO) 2.4 GHz 573.5 Mbps (2x2 MIMO) Max Clients 300+ Channel Width Up to 160 MHz Ports (1) GbE RJ45 — PoE In PoE Injector Not included — sold separately Mount Ceiling (included mount) Management UniFi Network Application Barcode 810010076830 Weight 1.18 g (unit only) ⚠️ Please note: This unit does not include a PoE injector. You will need a compatible PoE switch or injector to power the U6 Pro. Contact our team if you need help selecting the right PoE source. Downloads 📄 Datasheet 📋 Installation Guide Why Buy from CCTV Guru? ✅ Australian stock — fast dispatch from Sydney ✅ Local AU support team — real humans, real answers ✅ Competitive pricing on all Ubiquiti UniFi products ✅ Secure checkout with multiple payment options

Read more less

High-performance WiFi 6 GPON CPE.The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port to connect a local fiber line. It also excels at establishing reliably strong, long-distance fiber links up to 20 kilometers, allowing you to extend your service range and build your customer base.Features: 2x2, high-efficiency WiFi 6 2.4 GHz band (2x2 MIMO) with a 300 Mbps radio rate 5 GHz band (2x2 MU-MIMO and OFDMA) with a 1.2 Gbps radio rate 2.4 Gbps max downstream line rate 1.2 Gbps max upstream line rate Establishes GPON links up to 20 km Powerful Layer 2/3 management features (1) GPON WAN port (4) GbE RJ45 LAN ports Powered with the included power adapter or passive PoE Internal WiFi 6 (802.11ax) antennas

Read more less

Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports.The Switch Enterprise XG 24 (USW Enterprise XG 24) is a fully managed, mult-gigabit, Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports. The USW Enterprise XG 24 also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the USW Enterprise XG 24 offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (24) 10GbE RJ45 ports (2) 25G SFP28 ports (1) USP RPS DC input Layer 3 switching features Single-row RJ45 port layout for easy patch panel cable management Downloads Datasheet Installation Guide

Read more less

PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting Can be installed horizontally or vertically making it ideal for desktop, magnetic wall-mount, and pole-mount installations. Indoor/Outdoor Design Designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options, the USW-Flex provides both flexibility and durability Seamless Integration Fully configurable through UniFi Controller

Read more less

A wall-mountable*, 16-port, Layer 2 PoE switch with a fanless cooling system. The Ubiquiti UniFi Switch Lite 16 PoE is a wall-mountable, Layer 2 switch designed for professional network environments. It offers 16 Gigabit Ethernet RJ45 ports, including 8 PoE+ ports delivering up to 45W total power, supporting efficient device connectivity and power delivery. Its fanless design ensures silent operation, while management through the UniFi Network application (version 7.2.94 and later) provides advanced control and monitoring capabilities. The included wall-mount kit simplifies installation, making it an ideal choice for streamlined, high-performance network setups. Features (8) GbE, PoE+ RJ45 ports (8) GbE RJ45 ports 45W total PoE availability Managed with the UniFi Network application: Version 7.2.94 and later *Kit included. Downloads USW-Lite-16-POE DatasheetUSW-Lite-16-POE Installation Guide

Read more less

UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Switch Pro 48 is an ideal aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.Features: (48) Gigabit RJ45 ports (4) 10G SFP+ ports Layer 2 and Layer 3* features UniFi SmartPower RPS DC input Near-silent cooling 1.3" touchscreen display Managed by UniFi Network Controller * Available in future firmware upgrade.

Read more less

Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input.The Switch Flex Mini (USW Flex Mini) is a fully managed, Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input. The USW Flex Mini can be powered with either PoE (via Port 1) or its included USB-C power adapter*. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) GbE, 802.3af PoE RJ45 input (4) GbE RJ45 ports Compact, slim housing Can be powered with a 5V, 1A USB-C adapter (Only Comes In Single Pack) Downloads Datasheet Installation Guide

Read more less