Description
TP-Link TL-POE4824G 48V Passive PoE Gigabit Adapter
Power Your TP-Link Devices Over a Single Ethernet Cable
The TP-Link TL-POE4824G is a 48V passive PoE Gigabit adapter that simultaneously delivers power and data to compatible TP-Link passive PoE devices over a single RJ45 cable — no separate power outlet required at the device end. Plug-and-play with no configuration needed, it's a simple and cost-effective solution for powering access points, IP cameras, and other passive PoE equipment in homes, offices, and commercial installations across Australia.
Key Features
- 48V passive PoE — powers compatible TP-Link passive PoE devices over a single Ethernet cable
- Gigabit speed support — full 1000 Mbps throughput, no bandwidth bottleneck
- Auto-determines necessary power requirements for connected devices
- Plug-and-play — no configuration or software required
- Convenient wall-mounting bracket included for tidy, fixed installations
- Compact and lightweight — easy to deploy in tight spaces
Use Cases
-
Wireless Access Points: Power TP-Link passive PoE access points mounted on ceilings or walls without running a separate power cable.
-
IP Cameras: Supply power and data to compatible passive PoE cameras in locations without a nearby power outlet.
-
Small Office & Home Networks: A cost-effective alternative to a full PoE switch when only one or two devices need to be powered via PoE.
-
Retrofit Installations: Add PoE power to an existing Ethernet run without replacing the switch or adding new cabling.
Specifications
| Specification |
Detail |
| Model |
TL-POE4824G |
| PoE Type |
48V Passive PoE (non-802.3af/at) |
| Data Speed |
Gigabit (1000 Mbps) |
| Ports |
1 × RJ45 IN (from router/switch) + 1 × RJ45 OUT (to PoE device) |
| Mounting |
Wall-mountable (bracket included) |
| Configuration |
Plug-and-play, no setup required |
| Weight |
0.38 kg |
| Vendor |
TP-Link |
Frequently Asked Questions
What is the difference between passive PoE and standard 802.3af/at PoE?
Standard 802.3af/at PoE uses a negotiation process to detect and power compliant devices safely. Passive PoE applies voltage to the cable without negotiation — it is simpler and lower cost, but must only be used with devices specifically designed for passive PoE. Using a passive PoE injector with a non-compatible device may damage it.
Which TP-Link devices are compatible with the TL-POE4824G?
The TL-POE4824G is designed for TP-Link products that support 48V passive PoE. Check your device's specifications or the TP-Link compatibility list to confirm compatibility before use. Common compatible devices include select TP-Link Omada and EAP series access points.
Can I use this with a non-TP-Link device?
Only if the device explicitly supports 48V passive PoE input. Using this adapter with a device that does not support passive PoE may cause permanent damage. Always verify compatibility before connecting.
Does it support Gigabit speeds?
Yes. The TL-POE4824G supports full Gigabit (1000 Mbps) data throughput, so it will not create a bottleneck on Gigabit networks.
Do I need a PoE switch to use this adapter?
No. The TL-POE4824G connects between your standard (non-PoE) router or switch and the powered device. It draws power from its own power supply and injects it onto the Ethernet cable — your existing switch does not need to support PoE.
