Teltonika TSW304 — Compact 4-Port Gigabit DIN-Rail Unmanaged Switch

Description

DIN-Rail Gigabit Switch

Teltonika TSW304 — Compact 4-Port Gigabit DIN-Rail Unmanaged Switch

The Teltonika TSW304 is the tiniest switch in the Teltonika range — an ultra-compact, plug-and-play DIN-rail Gigabit switch built for industrial and CCTV deployments across Australia. It packs four Gigabit Ethernet ports, 8 Gbps non-blocking switching and an integrated DIN-rail bracket into a shock-resistant aluminium body just 102 × 25 × 81.5 mm. A wide 7–57 VDC / 9–40 VAC power input and a -40 °C to +75 °C operating range let it slot into any cabinet, control panel or remote enclosure and start forwarding traffic in seconds — no configuration required.

Ports
4× Gigabit
Switching
8 Gbps
Power
7–57V / 9–40 VAC
Industrial
-40 to +75 °C

Why choose the TSW304

Ultra-compact, DIN-rail ready

At just 102 × 25 × 81.5 mm with an integrated DIN-rail bracket, the TSW304 fits the tightest cabinets and control panels — the easiest way to add four Gigabit ports anywhere.

Full Gigabit performance

Four 10/100/1000 Mbps ports backed by 8 Gbps non-blocking switching and jumbo-frame support handle high-throughput video and data without breaking a sweat.

Flexible wide-range power

A wide 7–57 VDC or 9–40 VAC input plus passive PoE input on port 1 lets it run from a PSU, DC bus or AC source — ideal for cabinets, vehicles and remote sites.

Rugged & reliable

A shock-resistant aluminium housing rated -40 °C to +75 °C with IP30 protection and true plug-and-play operation keeps networks up in the harshest environments.

Technical specifications

Switching & Ports
Ethernet ports 4 × RJ45 10/100/1000 Mbps (Gigabit), IEEE 802.3 / 802.3u / 802.3az, auto MDI/MDIX
Switching capacity 8 Gbps non-blocking
MAC address table 2K (2,000) entries
Jumbo frames Up to 9,216 bytes
Packet buffer 128 KB
Switch type Unmanaged Layer 2 (plug & play)
Power
Input voltage 7–57 VDC; 9–40 VAC
Connector 2-pin industrial power socket
Passive PoE Passive PoE input on port 1 (powering the switch)
Power consumption 0.26 W idle / 1.44 W maximum
Physical & Environment
Casing Aluminium housing, IP30, shock-resistant
Dimensions 102 × 25 × 81.5 mm
Weight 210 g (device)
Operating temperature -40 °C to +75 °C
Operating humidity 10% to 90% non-condensing
Mounting Integrated DIN-rail bracket
Management
Management Unmanaged — no configuration, true plug & play
Operation Layer 2 store-and-forward switching
Compliance & Approvals
Approvals RCM (Australia), CE, UKCA, CB, FCC, IC
Safety EN IEC 62368-1:2020+A11:2020
Supply chain NDAA 889 compliant
Ordering Information
Order code (SKU) TSW304000000
Warranty 2 years (24 months) — Australian warranty

Frequently asked questions

How many ports does the TSW304 have?

Four RJ45 Gigabit Ethernet ports (10/100/1000 Mbps), all able to switch traffic at full wire speed.

Do I need to configure it?

No. The TSW304 is an unmanaged Layer 2 switch — connect your devices, apply power, and it works straight out of the box.

Does the TSW304 support PoE?

It accepts a passive PoE input on port 1 to power the switch itself, but it does not output PoE to connected devices. For powered ports, see the Teltonika TSW200 (PoE+ on all eight ports).

How fast is it?

All four ports are full Gigabit (10/100/1000 Mbps) with 8 Gbps non-blocking switching capacity and jumbo-frame support up to 9,216 bytes.

How is it powered?

It accepts a wide 7–57 VDC or 9–40 VAC input via a 2-pin industrial socket and draws under 1.5 W at maximum load.

How small is it?

Just 102 × 25 × 81.5 mm and 210 g — the tiniest switch in the Teltonika range, designed to fit the most space-constrained cabinets.

Can it handle harsh environments?

The shock-resistant aluminium housing is IP30-rated and operates from -40 °C to +75 °C, suitable for cabinets and industrial sites.

How is it mounted?

The TSW304 has an integrated DIN-rail bracket, so it clips straight onto a 35 mm DIN rail with no extra kit.

What warranty applies in Australia?

The TSW304 carries a 2-year (24-month) warranty, backed by local Australian support.

Downloads

2-Year AU Warranty
Fast AU-Wide Shipping
AU Tech Support

Teltonika TSW304 — Compact 4-Port Gigabit DIN-Rail Unmanaged Switch

Product form

SKU: TSW304000000

DIN-Rail Gigabit Switch Teltonika TSW304 — Compact 4-Port Gigabit DIN-Rail Unmanaged Switch The Teltonika TSW304 is the tiniest switch in... Read more

$193.20  $189.00 Incl. GST

    • PayPal
    • Apple Pay
    • Visa
    • Mastercard
    • American Express
    • Zip
    • Afterpay

    • Warranty: 24 months
    • 30 day Money Back Guarantee
    • Australian Stocks & Express Delivery
    • Back-to-base Warranty & Tech Support

    Description

    DIN-Rail Gigabit Switch

    Teltonika TSW304 — Compact 4-Port Gigabit DIN-Rail Unmanaged Switch

    The Teltonika TSW304 is the tiniest switch in the Teltonika range — an ultra-compact, plug-and-play DIN-rail Gigabit switch built for industrial and CCTV deployments across Australia. It packs four Gigabit Ethernet ports, 8 Gbps non-blocking switching and an integrated DIN-rail bracket into a shock-resistant aluminium body just 102 × 25 × 81.5 mm. A wide 7–57 VDC / 9–40 VAC power input and a -40 °C to +75 °C operating range let it slot into any cabinet, control panel or remote enclosure and start forwarding traffic in seconds — no configuration required.

    Ports
    4× Gigabit
    Switching
    8 Gbps
    Power
    7–57V / 9–40 VAC
    Industrial
    -40 to +75 °C

    Why choose the TSW304

    Ultra-compact, DIN-rail ready

    At just 102 × 25 × 81.5 mm with an integrated DIN-rail bracket, the TSW304 fits the tightest cabinets and control panels — the easiest way to add four Gigabit ports anywhere.

    Full Gigabit performance

    Four 10/100/1000 Mbps ports backed by 8 Gbps non-blocking switching and jumbo-frame support handle high-throughput video and data without breaking a sweat.

    Flexible wide-range power

    A wide 7–57 VDC or 9–40 VAC input plus passive PoE input on port 1 lets it run from a PSU, DC bus or AC source — ideal for cabinets, vehicles and remote sites.

    Rugged & reliable

    A shock-resistant aluminium housing rated -40 °C to +75 °C with IP30 protection and true plug-and-play operation keeps networks up in the harshest environments.

    Technical specifications

    Switching & Ports
    Ethernet ports 4 × RJ45 10/100/1000 Mbps (Gigabit), IEEE 802.3 / 802.3u / 802.3az, auto MDI/MDIX
    Switching capacity 8 Gbps non-blocking
    MAC address table 2K (2,000) entries
    Jumbo frames Up to 9,216 bytes
    Packet buffer 128 KB
    Switch type Unmanaged Layer 2 (plug & play)
    Power
    Input voltage 7–57 VDC; 9–40 VAC
    Connector 2-pin industrial power socket
    Passive PoE Passive PoE input on port 1 (powering the switch)
    Power consumption 0.26 W idle / 1.44 W maximum
    Physical & Environment
    Casing Aluminium housing, IP30, shock-resistant
    Dimensions 102 × 25 × 81.5 mm
    Weight 210 g (device)
    Operating temperature -40 °C to +75 °C
    Operating humidity 10% to 90% non-condensing
    Mounting Integrated DIN-rail bracket
    Management
    Management Unmanaged — no configuration, true plug & play
    Operation Layer 2 store-and-forward switching
    Compliance & Approvals
    Approvals RCM (Australia), CE, UKCA, CB, FCC, IC
    Safety EN IEC 62368-1:2020+A11:2020
    Supply chain NDAA 889 compliant
    Ordering Information
    Order code (SKU) TSW304000000
    Warranty 2 years (24 months) — Australian warranty

    Frequently asked questions

    How many ports does the TSW304 have?

    Four RJ45 Gigabit Ethernet ports (10/100/1000 Mbps), all able to switch traffic at full wire speed.

    Do I need to configure it?

    No. The TSW304 is an unmanaged Layer 2 switch — connect your devices, apply power, and it works straight out of the box.

    Does the TSW304 support PoE?

    It accepts a passive PoE input on port 1 to power the switch itself, but it does not output PoE to connected devices. For powered ports, see the Teltonika TSW200 (PoE+ on all eight ports).

    How fast is it?

    All four ports are full Gigabit (10/100/1000 Mbps) with 8 Gbps non-blocking switching capacity and jumbo-frame support up to 9,216 bytes.

    How is it powered?

    It accepts a wide 7–57 VDC or 9–40 VAC input via a 2-pin industrial socket and draws under 1.5 W at maximum load.

    How small is it?

    Just 102 × 25 × 81.5 mm and 210 g — the tiniest switch in the Teltonika range, designed to fit the most space-constrained cabinets.

    Can it handle harsh environments?

    The shock-resistant aluminium housing is IP30-rated and operates from -40 °C to +75 °C, suitable for cabinets and industrial sites.

    How is it mounted?

    The TSW304 has an integrated DIN-rail bracket, so it clips straight onto a 35 mm DIN rail with no extra kit.

    What warranty applies in Australia?

    The TSW304 carries a 2-year (24-month) warranty, backed by local Australian support.

    Downloads

    2-Year AU Warranty
    Fast AU-Wide Shipping
    AU Tech Support

    Recently viewed products

      © 2026 CCTV Guru ACN 658 678 525

        • PayPal
        • Apple Pay
        • Visa
        • Mastercard
        • American Express
        • Zip
        • Afterpay
        • Klarna
        • Google Pay
        • Shop Pay

        Login

        Forgot your password?

        Don't have an account yet?
        Create account