Integrated Accessory Storage AXIS T91H61 Wall Mount 5507-641 The AXIS T91H61 (5507-641) is more than just a bracket; it is a comprehensive mounting station. Designed for Axis fixed dome cameras, it features a unique internal compartment that allows you to securely house midspans, media converters, and surplus cable loops directly behind the camera. With its built-in RJ45 cable and connector, installation is faster, cleaner, and more reliable in both indoor and outdoor environments. Load Capacity 30 kg (66 lb) Interface 1.5" NPS Thread Advanced Protection & Quick Connection Safe Storage for Accessories Stop struggling with external junction boxes. The T91H61 provides ample room to house connectivity devices and service loops inside its weather-protected, IK10-rated aluminum casing. Built-in RJ45 Connectivity Save time during installation with the pre-installed male-to-male Ethernet cable and RJ45 connector, including an IP66-rated gasket for a reliable, waterproof data connection. Extreme Environment Ready Designed to resist impacts (IK10) and weather (IP66, NEMA 4X), this mount protects your equipment against rain, dust, and corrosion in the toughest outdoor conditions. Flexible Mounting Options While designed for wall mounting, the T91H61 can be easily adapted for pole or corner installations using optional Axis accessories like the T91B57 Pole Mount or T91A64 Corner Bracket. Technical Specifications SKU 5507-641 Maximum Load 30 kg (66 lb) Material Powder-coated aluminum (White) Ratings IK10 Impact, IP66 Weather, NEMA 4X Threaded Interface 1.5" NPS thread for pendant kits Cable Routing Back hole and bottom conduit entries (x2) Dimensions 185 x 214 x 404 mm (7.28 x 8.43 x 15.9 in) Weight 3.9 kg (8.6 lb) Technical Resources Product Specs Official Datasheet Manufacturer Axis Portal

Read more less

Eve Water Guard - Leak Detector (Thread) Protect your home. Get alerted as soon as water leaks out, and protect your home from expensive water damage visually, audibly and via an app on your iPhone. Specifications: Power: 100-240V ~ 50/60 Hz - 50mA Wireless Connection: Bluetooth with Thread Dimensions: 65 x 65 x 45mm Sensor Cable Length: 2 Metres Requirements: iPhone or iPad with the latest version of iOS / iPadOS Notes: Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod or an Apple TV (4th generation or later) Features: Protect your home & belongings from water damage 100 dB Siren & Visual Alert App Notifications 2 Metre Sensing Cable (Extendable up to 150m) Siren Test Mode Bluetooth with Thread Complete Data Privacy

Read more less

Eve Energy (Matter) Switch your lights and appliances on and off using your voice or an app, and control them from afar. Specifications: Input|Output: AC240V 50Hz Rated Current: Max. 11A 2500W Load: Max. 1A | 240W Temperature: 0 - 35C Internal Fuse: 12.5A Standby Power Consumption: < 1 W Requirements: iOS 16.4 or later | Android 8.1 or later Control: Matter Controller | Thread Border Router Features: Switch your lights and appliances on and off using your voice or an app. Control your appliances on the go or based on presence. Matter-enabled to let you seamlessly control your home across smartphones and voice assistants of all major platforms. Get up and running in a flash with quick & easy set up requires home hub Cutting-edge Thread network technology 100% Privacy: No Eve cloud | no registration | no tracking Local communication without cloud dependency Track power consumption What's in the Box? 1 x Eve Energy 1 x Quick Start Guide

Read more less

Eve Motion (Matter) Smart Motion Sensor with Light Sensor, IPX3 Water Resistance, Automatic Activation of Lights and Devices, Thread Specifications: Field of view: 120 Degrees Distance: 9 m max at 2 m mounting height Operating temperature: -18C to +55C Indoors and outdoors: Certified IPX3 Twilight setting: 0 - 15000 lux Power: 2 x AAA Batteries Requirements: iOS 16.4 or later | Android 8.1 or later Control: Matter Controller | Thread Border Router Features: Control your lights and appliances via movement and receive notifications when motion is detected Indoors or outdoors with wireless battery operation and IPX3 water resistance Monitor large areas thanks to 120Deg field of view and up to 9 m detection range Matter-enabled Quick & easy set up requires Eve hub Motion time | set the sensitivity | refine automations by brightness 100% Privacy: No Eve cloud | no registration | no tracking Local communication without cloud dependency What's in the Box? 1 x Eve Motion 2 x AAA Batteries 1 x Quick Start Guide

Read more less

Eve Door & Window (Matter) Know the status of your door or window. Unassuming and a breeze to install with no tools required, Eve Door & Window fuses cutting-edge convenience with everyday peace of mind. Specifications: Power: Replaceable Battery R14250 Requirements: iOS 16.4 or later | Android 8.1 or later Control: Matter Controller | Thread Border Router Features: Check your door or window: See the current open/closed state at a glance Create automations to control other connected devices in your home whenever doors or windows are opened or closed Receive activity notifications to stay informed Truly wireless: Powered by a long-lasting, replaceable battery Matter-enabled Quick & easy set up requires EVE hub View time and duration statistics to make smarter choices Cutting-edge Thread network technology for a robust smart home 100% Privacy: No Eve cloud | no registration | no tracking Local communication without cloud dependency What's in the Box? 1 x Eve Door & Window 1 x Replaceable Battery ER14250 3.6V 1 x Quick Start Guide

Read more less

Eve Energy - Wireless Power Controller (Thread) Control your lights and appliances with a simple tap or by asking Siri, and see how much power they?re using. Or effortlessly set up schedules that put your appliances on autopilot. Now with Thread. Specifications: Input / Output: AC 100-240 V / 50/60 Hz Max Power: 10 A / 2300 W Dimensions: 77 x 77 x 60 mm Requirements: iPhone or iPad with the latest version of iOS / iPadOS Features: Autonomous Schedules Siri Voice Control Monitor Power Consumption Bluetooth with Thread Easy to setup without Bridge Complete Data Privacy Premium Quality & Safety Control lights & appliances with a simple tap

Read more less

Eve Aqua - Smart Water Controller (Thread) With Eve Aqua smart water controller, activate your irrigation system via your iPhone, Siri, or the onboard button. You can set up schedules easily, and have it take care of watering your plants automatically without any wifi, a bridge, or a gateway. Specifications: Thread: 26.5 mm / G¾ Inch Pressure: Min 1 bar / 14.5 psi - Max 5 bar / 72.5 psi Water Resistance: IPX4 UV Protection Power 2 x AA Replaceable Batteries Wireless Connection: Bluetooth Low Energy, Thread Dimensions: 77 x 95 x 128 mm Features: Autonomous Schedules 7 Water periods/day No Bridge Required Compatible with all popular hose systems Bluetooth & Thread Highest Data Privacy Siri Integration UV Protection Water Resistant Package Contents: 1 x Eve Aqua Smart Water Controller 2 x AA Batteries 1 x Hose Connector 1 x Quick Start Guide

Read more less

Eve Outdoor Cam - Secure Floodlight Camera with Two-way Audio and Motion Sensor Plus Apple HomeKit Secure Video, EV10ECA8101 Eve Outdoor Cam packs advanced technology into a sleek metal enclosure and is designed exclusively for Apple HomeKit Secure Video, built from the ground up to keep your data secure and your private space safe. Specifications: Wireless Connection: Wi-Fi (2.4 GHz 802.11b/g/n) Video Quality: 1080p/24fps H.264 video Motion Detection Range: 100° FOV & up to 8 Metres Waterproof Rating: IP55 Power: AC 100-240 V | 50/60 Hz Dimensions: 170 x 65 x 76mm Notes: Eve Outdoor Cam requires both a neutral wire and a connection to a ground wire. Features: FHD 1080p Video Quality (24fps) Connects via WiFi (2.4GHz) Dimmable Floodlight 100% Privacy: HomeKit Secure Video Rich & Instant Notifications Customize notifications & recordings People / Pet / Vehicle detection Activity Zones Package detection 157° field of view Night Vision Two-way Communication Can be installed to replace existing light IP55 Water & Dust resistant Three-axis camera angle adjustment What's in the box?: 1 x EVE Outdoor Cam 1 x Mounting kit and connection terminal 1 x Video surveillance sticker set 1 x Manual

Read more less

Eve Room - Indoor Air Quality Monitor (Thread) Eve Room is an award-winning indoor air quality monitor with built-in Apple HomeKit technology. The key to keeping your home healthy. Every day. Works with Apple homekit and now supports Thread. Specifications: Operating Temp Range: -0°C - 50°C Operating Humidity Range: 5% - 95% Battery Life: 6 Weeks (USB Rechargable) Reading Accuracy: Typical ± 0.3°C | Typical ± 3% humidity Charging Port: Micro-USB Display: E-ink 200 x 200 pixels Wireless Connection: Bluetooth with thread Dimensions: 54 x 54 x 15mm Features: Temperature / humidity & air quality sensor(VOC) Live a healthier life with fewer pollutants High-Contrast Display Wireless & Rechargable Bluetooth with Thread Complete Data Privacy Crafted from anodized aluminium Siri Integration

Read more less

EVE Flare - Portable Smart LED Lamp with Apple HomeKit technology Eve Flare is a waterproof smart LED lamp with wireless charging, 6 hours of light and Siri or tap control. Endless colour options, Bluetooth and Thread compatibl. Future-proofed via a free Matter firmware update. Ideal for indoor and outdoor use. Specifications: Light: 90 Lumens LED Runtime: 6+ Hours Wireless Charging Input: AC 100-240V | 50/60 Hz Operating Range: 0° - 40° C | 0% - 80% Humidity Energy Efficiency Class: A++ - A Connection: Bluetooth (Thread) Dimensions: 25cm x 25cm Features: Invigorate any space with beautiful light moods Control your ambience via your iPhone, iPad, Apple Watch, and Siri Set the perfect outdoor atmosphere thanks to IP65 water resistance Enjoy 6 hours of illumination and charge wirelessly Transport easily using the carry-and-hang handle Joins your Thread network automatically / supports Bluetooth and Thread Get up and running in a flash with quick & easy installation and setup, and no need for a bridge or gateway Apple HomeKit-enabled for outstanding ease of use and advanced security 100% Privacy: No Eve cloud, no registration, no tracking What's in the box? 1 x Eve Flare 1 x Wireless Charging Base 1 x Power Supply 1 x Quick Start Guide

Read more less

Eve Weather - Temperature & Humidity Monitor Eve Weather Temperature & Humidity Monitor tracks local outdoor temperature, humidity and barometric pressure trends. It features IPX3 water resistance and future-proof Thread network technology. Works with Apple homekit.  WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus. If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000. Specifications: Wireless Connection: Bluetooth Temperature Operating Range: -18°C to 55°C Humidity Operating Range: 0% - 100% Waterproof Rating: IPX4 Reading Accuracy: ± 0.3°C | ± 3% Humidity Power: CR2450 Replaceable Battery Dimensions: 54 x 54 x 16mm Features: Check Temperature & Humidity Provides 12-hour Weather Trends Beautiful Display Bluetooth connection Highest Data Privacy Works with Apple Home Crafted from anodized aluminum IPX4 Water resistant Wall Mountable What's in the box?: 1 x EVE Weather 1 x CR2450 battery 1 x Quick Start Guide

Read more less

Eve Door & Window - Contact Sensor Eve Door & Window Wireless Contact Sensor understands whether your door or window is open or closed. See the current open/closed state at a glance and view statistics on time & duration to make smarter choices. Works with Apple homekit. Specifications: Wireless Connection: Bluetooth Power: 1x ½ AA (ER14250 3.6V) Replaceable Battery Reader Dimensions: 52 x 24 x 23mm Tag Dimensions: 18 x 18 x 8mm Requirements: iPhone or iPad with the latest version of iOS/iPadOS Notes: Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod or an Apple TV (4th generation or later) as a home hub. Notifications away from home require a home hub. Features: Open / Closed state detection Instant Notifications Activate Scenes Easy Installation Highest data privacy Bluetooth connection Works with Apple Home Trigger your connected comforts such as your mood lighting and media center What's in the box?: 1 x EVE Door & Window (Reader & Tag) 1 x ½ AA (ER14250 3.6V) Replaceable Battery 1 x Quick Start Guide

Read more less

Eve Water Guard - Cable Extension Eve Smart Water & Leak Detector Extension (2m). Will detect water anywhere along the cable. Works with Apple homekit.

Read more less

Eve Cam - Wireless Home Security Camera Eve Secure Surveillance Smart Cam allows you to keep a eye on your home. Receive notifications on your iPhone immediately when something is up in your home and protect the privacy of your personal space in the process. Works with Apple homekit. Specifications: Power: 100-240V ~ 50/60 Hz - 50mA Wireless Connection: Bluetooth with Thread Dimensions: 65 x 65 x 45mm Sensor Cable Length: 2 Metres Requirements: iPhone or iPad with the latest version of iOS / iPadOS Notes: Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod or an Apple TV (4th generation or later) Features: Wireless Connection: WiFi (2.4 or 5GHz 802.11a/b/g/n) Field of view: 150° Video Quality: 1080p/24fps H.264 Video Power: 5 V / 1A max (USB) Night Vision Range: Up to 5 Metres Stand: 360° x 180° flexible with magnetic base Dimensions: 122 x 65 x 60mm Requirements: iPhone or iPad with the latest version of iOS/iPadOS | HomePod or Apple TV (4th generation or later) as a home hub What's in the box?: 1 x EVE Cam 1 x USB Power Supply 1 x 2.2m USB cable 1 x Metal Plate for Magnetic Wall installation 1 x Bag of Screws & Anchors 1 x Adhesive pad 1 x Quick start guide

Read more less

Dahua 4 x 8MP + 8 Channels Kit: 2 x 8MP TiOC and 2 x 8MP Turret Cameras with 8CH AI NVR, Black or White If you are looking for all black security cameras for your home or office, you are on the right page. This bundle comes with two TiOC cameras which features two-way audio, full colour night vision and audio alarm to warn off intruders, plus two more standard cameras with IR black and white night vision but full colour when there are lights around with one-way audio from footage. The recorder to store your footage comes with 8 Channel which means you can connect up to 8 cameras which you can add four more cameras at the later stage if you need more. For the storage (Hard Disk),  you can add from dropdown menu. 3TB should cover for a week footage for 4 x cameras. But if you want to keep more weeks of footage, you can add up to 8TB. Dahua 8MP: 2 TiOC & 2 IR with 4 or 8 Channel Kit: 2 x DH-IPC-HDW3866EMP-S-AUS (Please choose camera colour: White or Black) 2 x DH-IPC-HDW3849H-AS-PV-ANZ-S2 (Please choose camera colour: White or Black) 1 x DHI-NVR4108HS-8P-AI/ANZ or 4 Channel DHI-NVR4104HS-P-AI/ANZ In the Kit:2 x 8MP Fixed Turret DH-IPC-HDW3866EMP-S-AUS-BLKDahua 8MP 4K WizSense Eyeball IP Camera 8MP 1/2.8'' CMOS image sensor, excellent low luminance performance and high definition of images. Outputs max. 8MP (3840 x 2160) @25/30 fps. H.265 codec, high compression rate, ultra-low bit rate. Built-in IR LED, max. IR distance: 30 m. ROI, SMART H.264 +/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments. Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. Intelligent detection: Intrusion, tripwire (support the classification and accurate detection of vehicle and human). Abnormality detection: Motion detection, privacy masking, scene changing, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection. Max. 256 G Micro SD card. built-in Mic. 12 VDC/PoE power supply facilitates installation. IP67 protection. SMD 4.0, AI SSA. 2 x 8MP TiOC Fixed Turret DH-IPC-HDW3849H-AS-PV-ANZ-BLKDahua TIOC 2.0, 8MP Security Camera, Active Deterrence, Full Colour Night Vision & Two-way Audio, 2.8mm Fixed-focal Lens 8MP 1/2.8'' CMOS image sensor, low luminance, and high definition image. Outputs max. 8 MP (3840 x 2160)@25/30 fps. H.265 codec, high compression rate, ultra-low bit rate. Built-in warm light and IR LED; the max. IR illumination distance is 30 m and warm light distance is 30 m. ROI, SMART H.264+/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments. Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. Intelligent monitoring: Intrusion, tripwire (the two function support the classification and accurate detection of vehicle and human). Abnormality detection: Motion detection, privacy masking, scene changing, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection. Alarm: 1 in, 1 out; audio: 1 in, 1 out; supports max. 256 G Micro SD card; buit-in dual MICs; 1-ch speaker; support two-way talk. 12 VDC/PoE power supply. IP67 protection. Sound and light alarm (red and blue lights). SMD 4.0. One press arming/disarming through alarm input. Choose 4 Channel or 8 Channel AI NVR 1 x 4 CH AI NVR DHI-NVR4104HS-P-AI/ANZDahua 4-Channel Compact WizSense 4K NVR 4-channel AI-enabled NVR with 4 PoE ports Supports up to 16MP IP cameras SMD 4.0 for accurate human/vehicle motion detection 1 × SATA HDD bay (up to 10TB, not included) H.265+/H.264 compression for efficient storage HDMI output supports 4K (3840×2160) Compact 1U design with fanless operation ONVIF compliant for 3rd-party IP cameras Remote viewing via DMSS app (iOS/Android) Ideal for small-scale residential and business CCTV 1 x 8CH NVR DHI-NVR4108HS-8P-AI/ANZDahua 8-Channel NVR with 8 PoE Ports – AI-Powered 4K Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format. Access, storage or forwarding at 256 Mbps (180 Mbps when AI function enabled). Max. decoding capability: 16 ?? 1080p@30 fps. Supports adaptive decoding. AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus. AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; ANPR; people counting; stereo analysis; heat map. Connected to the third-party network cameras. Security baseline 2.3.

Read more less

Ubiquiti UniFi Protect G4 Doorbell Pro PoE Kit, 2MP Camera, Secondary 2MP Package Camera, IR Up To 20ft, Includes PoE Chime, Doorbell is PoE Your premium UniFi doorbell with an enhanced package detection camera, integrated display & PoE Chime! Improved HDR and low-light performance Programmable welcome display and secondary package-detection camera AI event detections Connect and power using PoE Integrated 2-way audio Includes PoE Chime Weather-resistant (outdoor covered) Ubiquiti UniFi Protect G4 Doorbell Pro PoE Kit Installation Video

Read more less

Ubiquiti UniFi Wi-Fi 6 Plus AP 2x2 Mimo Wi-Fi 6, 2.4GHz @ 573.5Mbps & 5GHz @ 2.4Gbps **No POE Injector Included** A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses. Features  140 m² (1,500 ft²) coverage 300+ connected devices WiFi6 (2x2 MIMO) Powered using PoE Technical Specifications Mechanical Dimensions Ø160 x 33 mm (Ø6.3 x 1.3") Weight Without mount: 338 g (0.75 lb)With mount: 413 g (0.91 lb) Enclosure materials Polycarbonate, aluminum Mount materials ABS, SGCC steel Hardware Networking interface (1) GbE RJ45 port Management interface Ethernet Power method PoE Supported voltage range 44–57V DC Max. power consumption 9W Max. TX power2.4 GHz5 GHz 23 dBm23 dBm MIMO2.4 GHz5 GHz 2 x 22 x 2 Throughput rate2.4 GHz5 GHz 573.5 Mbps2402 Mbps Antenna gain2.4 GHz5 GHz 3dBi5.4 dBi Button Factory reset LEDs White/blue Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/gWiFi 4/WiFi 5/WiFi 6 Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Zero-wait DFS Yes**Supported with upcoming firmware versions. Concurrent clients 300+ Software Management application UniFi Network: Version 7.3.76 and later Downloads Installation Guide

Read more less

Hikvision M Series · 8K · 32 Channel · 24 PoE The Hikvision DS-7732NI-M4/24P is a 32-channel 8K Network Video Recorder built for serious Australian sites — large factories, multi-building campuses, schools, hotels, car yards, logistics centres and high-end residential estates. The standout feature: 24 built-in PoE ports — eight more than the standard 16-PoE model — so you can power and connect up to 24 cameras directly from the recorder without needing an extra PoE switch. The remaining 8 channels accept IP cameras from your wider network for ANPR, panoramic, fisheye or third-party ONVIF models. Four internal SATA bays accept up to 16 TB drives each (64 TB total), delivering months of continuous 24/7 recording even with all 32 channels at full 4K. AcuSense-ready firmware adds deep-learning human and vehicle classification, line-crossing, intrusion detection and perimeter protection across every channel — drastically reducing nuisance alerts and turning multi-day playback searches into seconds. Channels 32 CH · Up to 32 MP PoE Ports 24 × PoE (af/at) Display True 8K HDMI Output Storage 4 × SATA · Up to 64 TB Why 24 PoE ports change the install economics On a typical 32-channel site, you'd usually need the NVR plus a separate 24-port managed PoE switch — that's another rack unit, another power supply, another point of failure, and another piece of hardware to commission and document. The DS-7732NI-M4/24P collapses all of that into a single 1.5U chassis. Your installer plugs up to 24 cameras directly into the back of the recorder via Cat6 (up to 100 m runs), and the NVR handles power, data and discovery automatically. Faster install, fewer parts, lower total cost of ownership. 24 PoE Ports Built-In Power and data over a single Cat6 run to 24 cameras, up to 100 m. IEEE 802.3 af/at compliant with a generous 210 W total PoE budget (max 30 W per port) — enough for a full perimeter without an extra PoE switch. True 32-Channel 32 MP Input Every channel supports cameras up to 32 MP — mix PanoVu, fisheye, ColorVu and 4K+ AcuSense cameras across a single NVR without throttling resolution or frame rate. AcuSense Smart Detection When paired with AcuSense cameras, the NVR runs deep-learning human and vehicle classification across all 32 channels — filtering false alarms from leaves, animals and shadows. Quad-SATA, 64 TB Capacity Four internal SATA bays accept enterprise-grade surveillance HDDs up to 16 TB each, delivering month-long retention even with all 32 cameras at full 4K H.265+. 320 Mbps Incoming Bandwidth Designed to run a full deployment of 4K ColorVu, AcuSense and PanoVu cameras simultaneously — without the bottlenecks of lower-tier NVRs. IP Speaker Integration Connect up to 8 Hikvision IP speakers for two-way audio warnings, scheduled announcements or live security-officer talk-down — directly from the NVR. Watch the M Series 8K NVR in action AcuSense NVR + Standard Camera — Smart False-Alarm Filtering Hikvision AcuSense — Installation & Operation Guide Engineered for Australian commercial sites Every M Series NVR sold by CCTV Guru ships from our Australian warehouse with local stock, local firmware, and full Australian Hikvision warranty. The DS-7732NI-M4/24P operates reliably from −10 °C to 55 °C, accepts standard 100–240 V AC mains, and is purpose-built to handle the heat, humidity and dust typical of Australian commercial, industrial, and outdoor-adjacent sites. Hik-Connect P2P Free remote viewing on iOS and Android via the Hik-Connect app — no static IP or port forwarding required. ONVIF Compatible Pairs with third-party ONVIF cameras as well as the full Hikvision IP range, giving you flexibility for hybrid and multi-vendor sites. RAID 0 / 1 / 5 / 6 / 10 Quad-SATA design supports RAID configurations for redundancy and performance — critical for sites where footage loss is not an option. Smart Playback Search recordings across all 32 channels by face, human, vehicle, line-crossing or intrusion event — days of footage reviewed in seconds. Full technical specifications Hikvision M Series NVR — DS-7732NI-M4/24P Model DS-7732NI-M4/24P Series Hikvision M Series 8K NVR (Ultra Series) Form Factor 1.5U Desktop / Rack-Mount Compatible Video Inputs 32-channel IP, up to 32 MP per channel Incoming Bandwidth 320 Mbps Outgoing Bandwidth 400 Mbps Video Compression H.265+ / H.265 / H.264+ / H.264 Decoding Capability 2-ch @ 32 MP (30 fps) + 2-ch @ 8 MP (30 fps) · 10-ch @ 8 MP · 20-ch @ 4 MP · 32-ch @ 1080p Recording Resolution 32 MP / 24 MP / 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA Synchronous Playback Up to 32 channels HDMI 1 Output 8K (7680 × 4320) @ 30 Hz · 4K @ 60 Hz · 2K · 1080p HDMI 2 Output 4K (3840 × 2160) @ 60 Hz · 1920 × 1080 @ 60 Hz VGA Output 1920 × 1080 @ 60 Hz (independent output) CVBS Output 1 channel Audio Output 1-ch RCA, linear, 1 Vp-p, 1 kΩ IP Speaker Support Up to 8-ch IP speakers connectable Smart Function AcuSense — Human/Vehicle classification, perimeter protection, facial detection (with compatible cameras) Network Interface 2 × RJ45 10/100/1000 Mbps Self-Adaptive Ethernet PoE Interfaces 24 × Independent 10/100 Mbps PoE (IEEE 802.3 af/at) PoE Budget 210 W total, max 30 W per port Network Protocols TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS, ONVIF, OTAP HDD 4 × SATA, up to 16 TB per drive (64 TB total capacity) RAID RAID 0, 1, 5, 6, 10 supported USB Interfaces 1 × USB 3.0 (front) · 1 × USB 2.0 (rear) Alarm In / Out 16 in / 4 out Power Supply 100–240 V AC, 50/60 Hz Power Consumption ≤ 30 W (without HDD and PoE off) Working Temperature −10 °C to 55 °C Working Humidity 10% – 90% Dimensions (W × D × H) 445 × 400 × 73 mm Weight (without HDD) ≤ 5 kg Mobile Apps Hik-Connect, Hik-Central, iVMS-4200 Australian Warranty 3 Years — CCTV Guru / Hikvision Australia Downloads & resources Download official Hikvision documents for setup, specifications, and recorder details. DS-7732NI-M4/24P Datasheet Quick Start Guide PDF User Manual PDF LiveGuard Setup (Web GUI) LiveGuard Setup (NVR GUI) Frequently asked questions Why choose the 24-PoE version over the 16-PoE model? If your site needs to power more than 16 cameras directly from the NVR — typical for large warehouses, retail, multi-floor offices, schools and gated estates — the 24-PoE version saves you the cost and complexity of adding a separate PoE switch. How does it handle 32 cameras with only 24 PoE ports? Twenty-four cameras connect directly to the NVR's onboard PoE ports for power + data. The remaining 8 channels accept IP cameras from your wider network — either powered by an external PoE switch or by their own power supplies. Does the DS-7732NI-M4/24P come with hard drives? The recorder ships as a chassis only. CCTV Guru offers pre-fitted Seagate SkyHawk or WD Purple surveillance drives from 4 TB up to 16 TB per bay — choose your configuration at checkout. Can it be rack-mounted? Yes — the 1.5U chassis is compatible with optional rack-mount ears for standard 19" racks. Order the rack-mount kit alongside the NVR if required. What RAID levels are supported? RAID 0, 1, 5, 6 and 10 are all supported across the 4 SATA bays — letting you balance storage capacity, redundancy and performance for your site. Do you ship to my city? We ship Australia-wide from our local warehouse — Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin — with most metro orders arriving in 1–3 business days. 3-Year Warranty Australia-Wide Shipping Australian Tech Support

Read more less

TP-Link Tapo T110 Smart Door & Window Contact Sensor The TP-Link Tapo T110 is a compact wireless contact sensor that monitors the open and closed status of doors, windows, cabinets, and more in real time. Paired with a compatible Tapo Hub, it sends instant push notifications to your phone the moment something is opened unexpectedly — and can trigger automations across your entire Tapo smart home ecosystem. With tool-less installation and a battery life of over a year, it’s one of the simplest ways to add an extra layer of awareness and security to any Australian home. Key Features Real-Time Open/Close Monitoring — Instantly detects and reports the status of doors, windows, cabinets, drawers, fridges, or mailboxes via the Tapo app. Instant Push Notifications — Receive an alert on your phone the moment a monitored entry point is opened unexpectedly, day or night. Hub Siren Trigger — When paired with a Tapo Hub (e.g. H200), the hub can sound a siren alarm to deter intruders or warn household members. Smart Automations — Trigger other Tapo devices automatically — for example, turn on lights when the front door opens, or activate a camera recording when a window is opened. 1+ Year Battery Life — Long-lasting battery with low-battery notifications via the Tapo app so you’re never caught off guard. Tool-Free Installation — Mounts to virtually any flat surface using the included 3M adhesive — no drilling or wiring required. 15mm Gap Tolerance — The sensor and magnet work reliably with gaps up to 15mm, fitting most standard door and window frames. Tapo Ecosystem Integration — Works seamlessly with other Tapo cameras, smart plugs, bulbs, and sensors through the single Tapo app. Use Cases Front and back doors — receive an alert if a door is opened while you’re away or asleep Windows — confirm all windows are closed when leaving home without physically checking each one Cabinets and drawers — monitor access to medicine cabinets, liquor cabinets, or storage areas Mailbox — get notified the moment your mail or a parcel is delivered Fridge or freezer — alert when a door is left open to prevent food spoilage Rental properties — monitor entry points remotely without installing a full alarm system Technical Specifications Specification Detail Model Tapo T110 Sensor Type Magnetic contact (open/close detection) Max Sensor-Magnet Gap Up to 15mm Wireless Protocol Ultra-low-power wireless (requires Tapo Hub) Hub Required Yes — compatible Tapo Hub (e.g. Tapo H200) Battery Life 1+ year (battery type TBC; low-battery app alert) Installation Tool-free; 3M adhesive included Notifications Push notifications via Tapo app Smart Automations Yes — trigger Tapo lights, plugs, cameras, and hub siren App Tapo (iOS & Android) Compatible Ecosystem Tapo smart home devices Weight Approx. 40g Warranty 2 Years Recommended Accessories Tapo H200 Smart Hub — Required for the T110 to connect to your network and the Tapo app; also enables the hub siren alarm function. Tapo S200B Smart Button — Pair with the T110 for a more complete entry-point control setup — manually trigger scenes or alarms with a single press. Tapo C320WS Outdoor Wi-Fi Camera — Combine with the T110 to automatically trigger camera recording when a door or window is opened. Tapo P110 Smart Plug — Use automations to turn on a lamp or appliance when the T110 detects an open door. Downloads Tapo T110 Datasheet (PDF) Frequently Asked Questions Does the Tapo T110 require a hub? Yes. The T110 uses an ultra-low-power wireless protocol and must be paired with a compatible Tapo Hub (such as the Tapo H200) to connect to your home network and the Tapo app. It does not connect directly via Wi-Fi or Bluetooth. Can I use multiple T110 sensors in my home? Yes. Multiple T110 sensors can be paired to the same Tapo Hub and managed individually through the Tapo app. Each sensor can be named by location (e.g. “Front Door”, “Kitchen Window”) for easy identification. Will it trigger an alarm if a door is opened? Yes. When paired with a Tapo H200 Hub, the T110 can trigger the hub’s built-in siren when an open event is detected. You can configure which sensors trigger the alarm and set schedules (e.g. only arm at night or when away from home). How is it installed? The T110 uses included 3M adhesive tape for tool-free mounting on virtually any flat surface. The sensor body attaches to the door or window frame, and the smaller magnet attaches to the moving part. No drilling or wiring is required. Can it trigger other smart devices when a door opens? Yes. Through the Tapo app’s automation feature, the T110 can trigger any compatible Tapo device — such as turning on a smart bulb, activating a smart plug, or starting a camera recording — when an open or close event is detected. Is the T110 suitable for outdoor use? The T110 is designed for indoor use. For outdoor door and gate monitoring, ensure the sensor is protected from direct rain and moisture exposure, or consider a weatherproof alternative.

Read more less

Detect Water Leaks Instantly with a 90dB Alarm and Instant App Alerts The TP-Link Tapo T300 is a smart water leak and flood sensor that detects moisture on both its top and bottom surfaces using six high-sensitivity probes — alerting you immediately with a built-in 90dB alarm and instant Tapo app push notification. With IP66 waterproofing, up to 3 years of battery life, and seamless integration with the Tapo H100 Smart Hub, it's a compact, reliable solution for protecting kitchens, bathrooms, laundries, and any water-prone area in Australian homes and businesses. Key Features 90dB Built-In Alarm: Emits a loud 90dB siren directly from the sensor when water is detected — audible throughout most homes without requiring a hub or internet connection. Dual Induction Detection: Six high-sensitivity probes on both the top and bottom of the device detect water dripping from above and complete immersion from below — covering both leak and flood scenarios. Instant App Notifications: When paired with the Tapo H100 Smart Hub, receive instant push notifications to your smartphone via the Tapo app the moment a leak is detected — even when you're away from home. Tapo Hub Alarm Integration: Triggers the Tapo H100 hub's siren for additional audible coverage across your home, and can activate smart lighting via Tapo Smart Actions for a visual alert. IP66 Waterproof & Dustproof: Rated IP66 for protection against powerful water jets and dust ingress — suitable for humid environments including bathrooms, laundries, and under-sink cabinets. Up to 3-Year Battery Life: Powered by two replaceable AAA batteries with up to 3 years of standby life — no wiring or power outlet required. Low Battery Alerts: Sends a push notification when battery levels are low so you're never caught off guard. Compact & Flexible Placement: Small, elegant design fits discreetly in any location — under sinks, behind appliances, near hot water systems, and in roof spaces. Smart Actions: Create automations in the Tapo app to trigger smart lights, sirens, or other Tapo devices when a leak is detected for a comprehensive alert system. Common Use Cases Under-sink leak detection in kitchens and bathrooms Washing machine and dishwasher overflow detection in laundries Hot water system and storage tank leak monitoring Roof space and ceiling cavity flood detection Aquarium and fish tank overflow protection Commercial kitchen and hospitality venue water leak monitoring Rental property protection against undetected water damage Technical Specifications Model Tapo T300 Detection Method Dual induction — 6 probes (top & bottom) Alarm Volume 90dB (built-in) Waterproof Rating IP66 Power Source 2× AAA batteries (included) Battery Life Up to 3 years (standby) Hub Required Tapo H100 (for app alerts & hub alarm) Standalone Alarm Yes (90dB without hub) App Tapo (iOS & Android) Smart Actions Yes (via Tapo app) Compatible Hub Tapo H100 Low Battery Alert Yes (push notification) Downloads Tapo T300 Datasheet (PDF) Frequently Asked Questions Does the T300 work without the Tapo H100 hub? Yes. The T300 has a built-in 90dB alarm that sounds immediately when water is detected — no hub or internet connection required for the local alarm. However, to receive push notifications on your smartphone and trigger hub-based automations (such as activating smart lights or the hub siren), you need the Tapo H100 Smart Hub paired with the T300. How does dual induction detection work? The T300 has six high-sensitivity probes on both the top and bottom surfaces of the device. The bottom probes detect water pooling or flooding on the floor, while the top probes detect dripping water from above — such as a leaking pipe or appliance. This dual detection ensures the sensor catches both slow drips and rapid flooding scenarios. Where should I place the T300? Place the T300 flat on the floor or surface where leaks are most likely to occur — under sinks, behind washing machines, near hot water systems, or under dishwashers. Ensure the bottom probes are in contact with the surface. The sensor can also be placed in roof spaces or ceiling cavities to detect roof leaks. How long do the batteries last? TP-Link rates the T300 for up to 3 years of battery life on two AAA batteries under typical standby conditions. Actual battery life may vary depending on how frequently the alarm is triggered and environmental conditions. The sensor sends a low battery push notification when replacement is needed. Can I connect multiple T300 sensors to one hub? Yes. The Tapo H100 hub supports up to 64 Tapo sub-devices, so you can connect multiple T300 sensors throughout your home and manage them all from a single Tapo app account. Each sensor can be named and assigned to a specific room for easy identification. Is it compatible with other smart home platforms? The T300 works within the Tapo ecosystem via the Tapo app and Tapo H100 hub. Some Tapo devices support Amazon Alexa and Google Home integration — check the Tapo app for current compatibility. It is not natively compatible with Apple HomeKit or Matter at this time.

Read more less

TP-Link Tapo S200D — Smart Remote Dimmer Switch The TP-Link Tapo S200D is a wireless smart remote dimmer switch that puts instant lighting control at your fingertips — no app required, no rewiring, and no electrician needed. Stick it to any wall, magnetic surface, or replace your existing wall plate, and enjoy effortless dimming and scene control for your Tapo smart lights from anywhere in the room. Key Features Instant Local Control: Control your smart lights directly — no app, no internet connection required. Tap or rotate for immediate response. Multi-Location Dimming: Use more than one S200D to control the same light from multiple locations — effectively creating a 3-way or 4-way dimmer without any rewiring. Customisable Actions: Single tap, double tap, and rotate gestures each trigger different smart actions — adjust brightness, switch scenes, or control multiple Tapo devices at once. Personalised Lighting Scenes: Set and recall preset scenes for different moods or activities — movie night, reading, entertaining — with one or two taps. Flexible Mounting Options: Mount with included screws over an existing wall plate, use the adhesive backing to stick it anywhere, or attach magnetically to any metal surface. 1+ Year Battery Life: Powered by a single CR2032 coin cell battery (included) with over 12 months of typical use. Tapo Hub Compatible: Connect to the Tapo Hub (sold separately) to unlock advanced automations, schedules, and expanded device control. Personalised Label Stickers: Included location stickers let you customise the switch for each room or function. Use Cases Living Rooms & Lounge Areas: Add a second dimmer at the couch or entertainment unit without touching your existing wiring. Hallways & Stairways: Replace traditional 2-way switching with wireless multi-location control — no electrician required. Bedrooms: Place a dimmer on the bedside table for easy goodnight lighting adjustments without getting up. Rental Properties & Apartments: Adhesive mounting means no drilling, no damage, and no bond issues — take it with you when you move. Home Offices: Set brightness scenes for focused work, video calls, or end-of-day wind-down routines. Shared Spaces: Share control with family members or guests without giving them access to your Tapo app. Technical Specifications Category Specification Model Tapo S200D Type Wireless Smart Remote Dimmer Switch Control Method Single tap, double tap, rotate Connectivity Tapo Hub required for advanced features (sold separately) Battery CR2032 coin cell (included) Battery Life Over 1 year (typical use) Mounting Options Screw (wall plate), adhesive, magnetic Compatibility Tapo smart lights and smart devices Weight 180 g SKU / Part Number Tapo S200D Barcode (EAN) 4897098687819 Downloads 📄 Download Tapo S200D Datasheet (PDF) Frequently Asked Questions Does the Tapo S200D require a Tapo Hub to work? No. The S200D can control compatible Tapo smart lights directly without a Hub. However, connecting it to the Tapo Hub (sold separately) unlocks advanced features including automations, schedules, and expanded multi-device control. Do I need to rewire anything to install the S200D? No rewiring is required. The S200D is a wireless remote dimmer that mounts using screws, adhesive, or magnetically — making it suitable for renters, apartments, and DIY installs without any electrical work. Can I use multiple S200D switches to control the same light? Yes. You can pair more than one S200D to the same Tapo smart light, effectively creating a 3-way or 4-way dimmer setup from multiple locations — ideal for hallways, stairways, and large living areas. What smart devices does the S200D work with? The Tapo S200D is designed to work with Tapo smart lights and other compatible Tapo smart devices. It is not compatible with non-Tapo or third-party smart home ecosystems unless bridged via a supported hub. How long does the battery last? The included CR2032 coin cell battery typically lasts over 12 months under normal use. Replacement batteries are widely available at supermarkets and electronics stores across Australia. Is the Tapo S200D compatible with Google Home or Amazon Alexa? The S200D itself is a local controller. Voice assistant compatibility (Google Home, Amazon Alexa) is managed through the Tapo app and connected smart lights rather than the S200D directly. Check the Tapo app for current integration support.

Read more less

TP-Link Tapo L920-5 Smart Wi-Fi LED Light Strip, Multicolour Vibrant, Intelligent Lighting — No Hub Required The TP-Link Tapo L920-5 is a 5-metre multicolour smart LED light strip that connects directly to your home Wi-Fi — no hub or extra equipment needed. With 50 individually controllable colour zones, music sync, and voice control support, it's the easiest way to transform any room, studio, or outdoor space with dynamic, personalised lighting. Key Features 50 individually addressable colour zones — create stunning gradient and multicolour effects Over 16 million colours plus warm white and cool daylight options Music sync mode — reacts to ambient sound in real time, keeping pace with the beat 20% brighter and 50% longer-lasting than standard LED strips PU-coated for water resistance, easy maintenance, and extended lifespan Cuttable and repositionable — 3M adhesive backing for flexible installation on any surface Schedule, timer, and Away Mode built in via the Tapo app Voice control via Amazon Alexa and Google Assistant Works with Tapo app (iOS 9+ / Android 4.4+) — no hub required Use Cases Home Entertainment: Set the perfect cinema ambiance and save it as a preset for future movie nights. Content Creators & Streamers: Fill your studio with expressive, on-brand lighting to elevate your YouTube or Twitch setup. Parties & Events: Sync the strip to music for an immersive light show that reacts to every beat. Bedroom & Living Areas: Schedule warm or cool lighting to match your morning routine, wind-down time, or sleep schedule. Outdoor & Camping: Lightweight and repositionable — easy to set up and move for any outdoor occasion. Security (Away Mode): Simulate occupancy with randomised lighting to deter unwanted visitors while you're away. Specifications Specification Detail Model Tapo L920-5 Strip Length 5 metres Colour Zones 50 individually addressable zones Colour Range 16+ million colours, warm white, cool daylight Connectivity Wi-Fi 2.4 GHz (no hub required) App Compatibility Tapo App — iOS 9+ / Android 4.4+ Voice Control Amazon Alexa, Google Assistant Protection PU-coated, water-resistant Mounting 3M adhesive backing, cuttable to length Weight 0.6 kg Vendor TP-Link Downloads Quick Installation Guide (PDF) Frequently Asked Questions Do I need a hub to use the Tapo L920-5? No. The L920-5 connects directly to your 2.4 GHz home Wi-Fi network via the Tapo app — no hub or bridge required. Can I cut the light strip to a shorter length? Yes. The L920-5 can be cut to your desired length at designated cut points. Once cut, the removed section cannot be reused. Is the L920-5 suitable for outdoor use? The strip features a PU protective coating that provides water resistance, making it suitable for sheltered outdoor areas. It is not rated for direct exposure to rain or submersion. How does music sync work? The strip uses the device microphone (via the Tapo app) to detect ambient sound and synchronises the lighting effects to the beat and frequency of the music in real time. Can I control it with Alexa or Google Assistant? Yes. The Tapo L920-5 is compatible with both Amazon Alexa and Google Assistant for hands-free voice control of on/off, brightness, and colour. Can I save custom lighting presets? Yes. You can save your favourite colour and brightness combinations as presets in the Tapo app and recall them instantly — ideal for recurring scenarios like movie nights or work-from-home sessions.

Read more less

Keep Your Tapo Battery Cameras Charged Year-Round with Solar Power The TP-Link Tapo A200 is a 4.5W monocrystalline solar panel designed to provide continuous, free solar charging for compatible Tapo battery-powered cameras — eliminating the need to manually recharge or replace batteries. With IP65 weatherproofing, a 4-metre charging cable, and a 360° adjustable mounting bracket, it's a practical, set-and-forget power solution for outdoor Tapo cameras across Australia — from sunny Queensland to overcast southern states. Key Features 4.5W Monocrystalline Solar Charging: Premium monocrystalline silicon cells deliver up to 4.5W of charging power — as little as 30 minutes of standard sunlight per day can keep compatible Tapo battery cameras running continuously. Compatible with Tapo Battery Cameras: Designed for use with the Tapo C425, Tapo C420, and Tapo C400 — connects directly to the camera's charging port via the included cable. IP65 Weatherproof: Fully dust-tight and protected against water jets — suitable for permanent outdoor installation in Australian conditions including rain, coastal humidity, and dust. 4-Metre Charging Cable: The generous 4m cable provides flexibility in positioning the solar panel for optimal sun exposure without being constrained by the camera's location. 360° Adjustable Mounting Bracket: Fully adjustable bracket allows you to angle the panel precisely towards the sun regardless of wall or roof orientation — maximising solar capture throughout the year as the sun's angle changes. Wall or Roof Mountable: Installs on any exterior wall, eave, or roof surface using the included mounting hardware. Set and Forget: Once installed and connected, the solar panel charges the camera automatically — no manual battery removal, charging, or replacement required. Common Use Cases Keeping Tapo C425, C420, or C400 cameras continuously charged without manual battery maintenance Remote or hard-to-access camera locations where battery replacement is inconvenient Off-grid properties, farms, and rural locations without mains power at the camera location Outdoor cameras on fences, sheds, and outbuildings where running power cable is impractical Reducing battery replacement costs and environmental impact for long-term outdoor deployments Technical Specifications Model Tapo A200 Solar Cell Type Monocrystalline silicon Max Charging Power Up to 4.5W Compatible Cameras Tapo C425, Tapo C420, Tapo C400 Charging Cable Length 4 metres Weatherproof Rating IP65 Mounting Bracket 360° adjustable Mounting Surface Wall or roof (hardware included) Weight 840g Downloads Tapo A200 Datasheet (PDF) Frequently Asked Questions Which Tapo cameras is the A200 compatible with? The Tapo A200 is compatible with the Tapo C425, Tapo C420, and Tapo C400 battery-powered cameras. It connects directly to the camera's charging port via the included 4-metre cable. TP-Link has indicated that additional camera models may be supported in future firmware updates — check the Tapo app or TP-Link's website for the latest compatibility list. How much sunlight does it need to keep the camera charged? Under standard sunlight conditions, as little as 30 minutes of direct sunlight per day is sufficient to keep a compatible Tapo battery camera running continuously. In practice, most Australian locations receive significantly more than this, making the A200 well-suited to year-round outdoor use across all states and territories. Will it work on cloudy or overcast days? Monocrystalline solar panels continue to generate power in overcast conditions, though at reduced efficiency compared to direct sunlight. In consistently overcast climates or heavily shaded locations, the panel may not generate sufficient power to fully offset the camera's consumption. For best results, position the panel in a location with maximum daily sun exposure using the 360° adjustable bracket. Can I use it with Tapo cameras that are not battery-powered? No. The Tapo A200 is designed specifically for Tapo battery-powered cameras (C425, C420, C400) and connects to their charging port. It is not compatible with mains-powered or PoE-powered Tapo cameras. Is the 4-metre cable long enough for most installations? For most residential installations, 4 metres provides sufficient reach to position the solar panel in an optimal sun-facing location while the camera monitors the desired area. If a longer run is required, the solar panel should be positioned as close as practical to the camera to avoid cable extension, which is not supported.

Read more less

Outdoor Security That Follows the Action — Day and Night The TP-Link Tapo TC40 is a weatherproof outdoor pan tilt Wi-Fi security camera designed for homeowners who want comprehensive, intelligent coverage without the complexity of a wired system. With 360° horizontal and 130° vertical rotation, AI-powered person detection, automatic motion tracking, and 30-metre night vision, the TC40 keeps watch over your entire property — and alerts you the moment something needs your attention. Setup is straightforward via the Tapo app, and it works with Alexa and Google Assistant for hands-free control. Key Features 1080p Full HD Video — Clear, sharp live view and recordings with enough detail to identify faces, vehicles, and events 360° Pan / 130° Tilt — Full horizontal rotation and wide vertical range eliminates blind spots across your entire outdoor area AI Person Detection — Distinguishes people from other motion sources (animals, vehicles, wind) to reduce false alerts and send only relevant notifications Automatic Motion Tracking — High-speed pan tilt mechanism automatically follows detected persons across the scene for continuous, uninterrupted footage Night Vision up to 30 Metres — Infrared night vision delivers a clear view in complete darkness at distances up to 30 metres IP65 Weatherproof — Dust-tight and protected against water jets; built for reliable outdoor performance in Australian conditions including rain and humidity Two-Way Audio — Built-in microphone and speaker let you communicate directly with visitors, couriers, or intruders from anywhere via the Tapo app Customisable Sound Alarm — Record and upload your own custom audio clip to play as a deterrent alarm when motion is detected Physical Privacy Mode — The lens is physically blocked by the camera housing when privacy mode is activated, ensuring no recording occurs Flexible Local Storage — Supports microSD cards up to 512 GB for continuous or scheduled local recording with no ongoing fees Tapo Care Cloud Storage — Optional Tapo Care subscription provides cloud-based video storage with unlimited space and easy remote playback Voice Assistant Compatible — Works with Amazon Alexa and Google Assistant for hands-free live view and control Multiple Mounting Options — Installs on walls, ceilings, or poles using the included screws, mounting template, and cable management loops Typical Use Cases Front yards, driveways, and entry points where 360° coverage and person detection replace multiple fixed cameras Backyards, pools, and outdoor entertaining areas requiring wide-angle monitoring without blind spots Side paths and gates where motion tracking ensures continuous footage of anyone approaching the property Rental properties and holiday homes where remote monitoring and two-way audio provide management capability from anywhere Small businesses, shops, and cafes needing an affordable outdoor Wi-Fi camera with smart alerts Households with existing Tapo smart home devices looking to add outdoor security to their ecosystem Technical Specifications Specification Detail Model Tapo TC40 Resolution 1080p Full HD (1920 × 1080) Pan / Tilt Range 360° horizontal / 130° vertical Night Vision Infrared, up to 30 metres AI Features Person Detection, Automatic Motion Tracking Audio Two-way (built-in mic & speaker) Sound Alarm Customisable audio clip upload Weatherproofing IP65 (dust-tight, water jet resistant) Local Storage MicroSD up to 512 GB (card not included) Cloud Storage Tapo Care (subscription, optional) Connectivity Wi-Fi (2.4 GHz) Voice Assistants Amazon Alexa, Google Assistant Privacy Mode Physical lens block Mounting Wall, ceiling, or pole (hardware included) App Tapo (iOS & Android) Weight 800 g Barcode (EAN) 4895252505832 SKU TC40 Downloads Tapo TC40 Datasheet (PDF) Frequently Asked Questions Does the TC40 require a hub or NVR? No. The TC40 connects directly to your home Wi-Fi network (2.4 GHz) and is managed entirely through the Tapo app. No hub, NVR, or additional hardware is required for basic operation, live view, and local storage. What is the difference between IP65 and IP66? IP65 means the camera is fully dust-tight and protected against water jets from any direction. It is suitable for most Australian outdoor environments including rain and humidity. IP66 offers slightly higher water resistance (against powerful jets). The TC40’s IP65 rating is appropriate for standard outdoor residential and light commercial use. Can I use the TC40 without a microSD card? Yes. Without a microSD card, the TC40 can still provide live view, motion alerts, and two-way audio via the Tapo app. For video recording and playback, you will need either a microSD card (up to 512 GB) or an active Tapo Care cloud storage subscription. How does person detection differ from standard motion detection? Standard motion detection triggers on any movement — including animals, blowing leaves, or passing car headlights — which can result in frequent false alerts. Person detection uses AI to specifically identify human figures, so you only receive notifications when a person is actually detected, significantly reducing alert fatigue. Is the TC40 compatible with my existing Tapo devices? Yes. The TC40 integrates with the broader Tapo ecosystem via the Tapo app. You can create automations linking the camera to other Tapo devices — for example, triggering a Tapo smart plug or light when motion is detected. What Wi-Fi band does the TC40 use? The TC40 connects on the 2.4 GHz Wi-Fi band only. While 2.4 GHz offers better range and wall penetration than 5 GHz, ensure your router broadcasts a 2.4 GHz network and that the camera is within reliable Wi-Fi range of your access point for stable performance.

Read more less

TP-Link VIGI NVR2016H — 16-Channel Network Video Recorder The TP-Link VIGI NVR2016H is a professional 16-channel network video recorder designed for business CCTV deployments where cameras are powered via a separate PoE switch or individual power supplies. With 4K HDMI output, H.265+ compression, 160 Mbps recording bandwidth, and full integration with the TP-Link VIGI ecosystem, it delivers a clean, scalable, and installer-friendly foundation for IP surveillance across retail, commercial, warehouse, and office environments across Australia. Key Features 16-Channel IP Video Recording: Supports up to 16 simultaneous IP camera channels for small to medium business CCTV systems with room to grow. 4K HDMI Output: Connect a monitor for live view and playback at up to 3840×2160 @ 30Hz, with simultaneous VGA output at up to 1080p @ 60Hz. H.265+ Compression: Significantly reduces storage and bandwidth requirements compared to H.264, without compromising recording quality. 160 Mbps Bandwidth: 160 Mbps incoming and outgoing bandwidth supports reliable multi-camera recording and simultaneous 16-channel playback. Dual SATA HDD Bays: Supports two SATA hard drives with up to 16TB capacity each (HDDs sold separately) for extended local storage up to 32TB total. Synchronous 16-Channel Playback: Review footage from all 16 cameras simultaneously, with timeline-based event search and variable playback speed. ONVIF Profile S Compatible: Works with TP-Link VIGI cameras and third-party ONVIF-compliant IP cameras for flexible system design. Remote Viewing: Access live and recorded footage remotely via the VIGI app on Android and iOS, or via VIGI Security Manager on desktop. Smart Detection Support: Compatible with VIGI cameras featuring human and vehicle classification, line crossing, and intrusion detection for intelligent alert management. Alarm I/O: 4 alarm inputs and 2 alarm outputs for integration with external sensors, sirens, and access control devices. Audio I/O: 1-channel RCA audio input and output for audio recording and monitoring. Flexible Management: Manage via web browser UI, VIGI Security Manager software, or the VIGI mobile app. Use Cases Retail & Hospitality: Monitor entrances, counters, aisles, stock rooms, and customer-facing areas with reliable 16-camera recording from a single unit. Warehouses & Logistics: Cover loading docks, storage areas, car parks, and perimeter zones — pair with a PoE switch for clean single-cable camera runs. Offices & Commercial Buildings: Centralise surveillance across reception, corridors, server rooms, and car parks with remote access for management teams. Clinics & Education Facilities: Scalable 16-channel capacity suits medium-sized facilities requiring comprehensive internal and perimeter coverage. Installer Projects (Existing Infrastructure): Ideal where cameras are already powered via a dedicated PoE switch or 12V DC supplies — the NVR2016H slots in as the recording and management hub. Specifications Model VIGI NVR2016H IP Video Channels 16 PoE Ports None (non-PoE model) Incoming / Outgoing Bandwidth 160 Mbps / 160 Mbps HDMI Output 3840 × 2160 @ 30Hz (4K) VGA Output 1920 × 1080 @ 60Hz Video Compression H.265+ / H.265 / H.264+ / H.264 Max Recording Resolution Up to 8MP (4K) Synchronous Playback 16 channels HDD Bays 2 × SATA (up to 16TB each, not included) Max Total Storage Up to 32TB Network Interface 2 × RJ45 10/100/1000 Mbps USB 1 × USB 2.0 (front), 1 × USB 3.0 (rear) Audio I/O 1-ch RCA input, 1-ch RCA output Alarm I/O 4 inputs / 2 outputs Interoperability ONVIF Profile S, CGI Mobile Access Android, iOS (VIGI App) Operating Temperature -10°C to 55°C Dimensions 330 × 285 × 45 mm In the Box NVR, power adapter, power cable, HDD power & data cables, mounting accessories, mouse, quick installation guide Official Videos How to Set Up People Counting Using VIGI VMS — Official TP-Link tutorial for configuring people counting analytics on the VIGI platform. How to Upgrade VIGI NVR Firmware — Official TP-Link walkthrough for keeping your VIGI NVR firmware up to date. Frequently Asked Questions Does the VIGI NVR2016H have built-in PoE ports? No. The NVR2016H is a non-PoE model and does not include built-in PoE ports. Cameras must be powered separately via a PoE switch, PoE injector, or 12V DC power supply. If you need built-in PoE, consider the VIGI NVR2016H-16P, which includes 16 built-in PoE+ ports. Is a hard drive included? No. The NVR2016H does not include a hard drive. It supports two SATA HDDs with up to 16TB each (32TB total). Surveillance-grade drives such as WD Purple or Seagate SkyHawk are recommended for reliable 24/7 recording. Can I view cameras remotely? Yes. Remote live view and playback are supported via the free VIGI app on Android and iOS, and via VIGI Security Manager on desktop, provided the NVR has an active internet connection. Does it work with non-VIGI cameras? Yes. The NVR2016H supports ONVIF Profile S, allowing compatible third-party IP cameras to be added. For full smart detection and AI analytics features, TP-Link VIGI cameras are recommended. What is the difference between the NVR2016H and the NVR2016H-16P? The key difference is power delivery. The NVR2016H-16P includes 16 built-in PoE+ ports (90W total budget) to power cameras directly. The NVR2016H has no built-in PoE — cameras must be powered separately. The NVR2016H also features 2 Gigabit network interfaces versus 1 on the 16P model, and has a lower alarm I/O count (4 in / 2 out vs 6 in / 4 out). How much storage can the NVR2016H support? It supports two SATA hard drives simultaneously, each up to 16TB, for a total of up to 32TB of local storage. Is this NVR suitable for commercial CCTV installations in Australia? Yes. The NVR2016H is well suited to retail, office, warehouse, hospitality, and commercial CCTV projects requiring up to 16 camera channels, particularly where cameras are already powered via a dedicated PoE switch or existing infrastructure. Downloads 📄 VIGI NVR2016H Resources — Datasheet, Firmware & User Guide (TP-Link AU)

Read more less

TP-Link VIGI NVR1104H-4P 4-Channel PoE+ Network Video Recorder The TP-Link VIGI NVR1104H-4P is a compact, easy-to-deploy 4-channel PoE+ network video recorder designed for small businesses and residential installations across Australia. With 4K HDMI output, plug-and-play VIGI camera support, and up to 10TB of local storage, it delivers professional-grade surveillance without the complexity. Key Features 4K HDMI Output & 16MP Decoding — Displays sharp footage up to 8MP resolution across a 4-channel layout, ensuring no detail is missed. 4 × PoE+ Ports (53W Budget) — Powers and connects up to four IP cameras over a single Ethernet cable per camera — no separate power adapters required. Plug & Play Camera Setup — New VIGI IP cameras are detected and activated automatically, making installation fast and straightforward. 4-Channel Simultaneous Playback — Review footage from all four cameras at once, with variable playback speed and event-based timeline navigation. 24/7 Continuous Recording — Supports up to 10TB HDD storage for uninterrupted, long-term footage retention. H.265+ Compression — Reduces storage and bandwidth consumption without sacrificing image quality. ONVIF Compatible — Integrates with VIGI and third-party ONVIF-compliant IP cameras for flexible system design. Two-Way Audio — Built-in speaker and voice intercom support enable real-time communication through compatible cameras. Remote Monitoring — Manage live feeds, playback, and alerts via the VIGI app, web UI, or VIGI Security Manager from anywhere. Flexible Mounting — Install wall-mounted, flat on a desk, or under a desk to suit your site layout. Use Cases Small retail stores, cafés, and restaurants needing a simple, reliable recorder Warehouses and storage facilities requiring 24/7 continuous recording Small offices and financial institutions with up to four camera positions Residential properties upgrading from analogue DVR to IP-based surveillance Installers building cost-effective VIGI end-to-end systems for clients Technical Specifications Specification Detail Model VIGI NVR1104H-4P Video Channels 4 Max Recording Resolution Up to 8MP Decoding Capacity 16MP (e.g. 4 × 4MP) Video Output 1 × HDMI (4K), 1 × VGA PoE Ports 4 × 10/100Mbps PoE+ (IEEE 802.3at) PoE Budget 53W total / 30W per port Network Port 1 × RJ45 10/100Mbps (uplink) HDD Bays 1 × SATA (up to 10TB, HDD not included) Video Compression H.265+ / H.265 / H.264+ / H.264 Simultaneous Playback 4 channels Audio Built-in speaker; two-way audio via compatible cameras USB Ports 2 × USB 2.0 ONVIF Profile S Remote Access VIGI App, Web UI, VIGI Security Manager Operating Temperature 0°C to 40°C Power Input 100–240V AC, 50/60Hz Dimensions 200 × 200 × 45 mm Weight Approx. 1.38 kg Warranty 2 Years Recommended Accessories TP-Link VIGI C540 4MP Pan Tilt Camera — Full-colour outdoor PTZ camera, plug-and-play compatible with this NVR. TP-Link VIGI C300 Series Cameras — Cost-effective indoor/outdoor fixed cameras for completing a 4-channel system. 3.5" SATA Hard Drive (up to 10TB) — Required for local recording; choose a surveillance-rated HDD (e.g. Seagate SkyHawk or WD Purple). Cat6 Ethernet Cable — For reliable PoE data and power delivery to each connected camera. HDMI Monitor or TV — For local live view and playback via the 4K HDMI output. Downloads VIGI NVR1104H-4P Datasheet (PDF) Frequently Asked Questions Does the NVR1104H-4P come with a hard drive? No. The NVR supports one 3.5" SATA HDD up to 10TB, which must be purchased separately. A surveillance-rated drive such as the Seagate SkyHawk or WD Purple is recommended for 24/7 operation. Can I use non-TP-Link cameras with this NVR? Yes. The NVR1104H-4P supports ONVIF Profile S, allowing basic integration with compatible third-party IP cameras. For full smart detection, plug-and-play setup, and two-way audio, TP-Link VIGI cameras are recommended. How many cameras can I connect? Up to four IP cameras can be connected — one per PoE+ port. All four can record simultaneously and be viewed in a split-screen layout. Can I access footage remotely? Yes. Remote access is available via the free VIGI mobile app (iOS and Android), a web browser UI, or the VIGI Security Manager desktop software. What is the maximum PoE power per port? Each PoE+ port supports up to 30W, with a total system budget of 53W across all four ports. This is sufficient for most VIGI cameras including pan tilt models. Is this NVR suitable for outdoor installation? The NVR itself is designed for indoor use. It should be installed in a sheltered, ventilated location. The connected cameras handle outdoor exposure.

Read more less

TP-Link VIGI C240I 4MP IR Dome Network Camera (2.8mm) The TP-Link VIGI C240I is a professional 4MP IR dome IP camera built for demanding indoor and outdoor commercial installations across Australia. With AI human and vehicle classification, smart detection, IK10 vandal-proof housing, IP67 weatherproofing, and flexible PoE or 12V DC power, it delivers reliable around-the-clock surveillance in environments where durability and accurate event detection are non-negotiable. The 2.8mm wide-angle lens provides broad coverage for enclosed spaces, lobbies, and open areas at close to medium range. 2.8mm vs 4mm — Which Lens Do I Need? Feature 2.8mm Lens (This Model) 4mm Lens Field of View Wider — suits large open areas & enclosed spaces Narrower — suits corridors & entrances Effective Range Shorter — best within ~8m Longer — effective to ~12m+ Best For Retail floors, lifts, reception, warehouses Corridors, entrances, car parks, perimeters Key Features 4MP Super-High Definition — Captures crisp 2560×1440 footage with fine detail for confident identification of people and events day and night. AI Human & Vehicle Classification — On-board AI distinguishes people and vehicles from other motion triggers, dramatically reducing false alarms from animals, foliage, or lighting changes. Smart Detection — Detects area intrusion, line-crossing, object abandoned/removal, and video tampering, with instant push notifications to the VIGI app. IK10 Vandal-Proof — Rugged dome housing withstands deliberate impact — rated for high-risk environments including car parks, stairwells, and public-facing installations. IP67 Weatherproof — Fully sealed against dust and heavy rain for reliable outdoor performance in all Australian weather conditions. IR Night Vision — Smart IR LEDs deliver clear black-and-white footage in complete darkness, with automatic exposure adjustment to prevent overexposure at close range. Smart Video Enhancement — True WDR, 3D DNR, Smart IR, and Night Vision processing ensure clear footage in high-contrast and low-light scenes. H.265+ Compression — Reduces bandwidth and storage requirements by up to 50% compared to H.264 without sacrificing image quality. PoE or 12V DC Power — Single-cable PoE installation via RJ45, or 12V DC adaptor where PoE is not available. Flexible Management — Manage via VIGI App (iOS/Android), VIGI NVR, VIGI Security Manager (PC), or web browser UI. Use Cases Retail shopfronts, supermarkets, and shopping centres requiring wide-angle coverage at close range Lifts, stairwells, and car park structures where IK10 vandal resistance is essential Building lobbies, reception areas, and corridors needing AI-classified smart detection Warehouses and loading docks requiring durable outdoor-rated cameras with PoE installation Schools, hospitals, and public facilities where accurate human detection reduces false alarm fatigue Perimeter fencing and outdoor areas exposed to dust, rain, and deliberate tampering Technical Specifications Specification Detail Model VIGI C240I (2.8mm) Resolution 4MP (2560 × 1440) Lens 2.8mm Fixed (also available in 4mm) Form Factor Dome (indoor/outdoor) Night Vision IR (Smart IR LEDs; black-and-white in darkness) AI Detection Human & Vehicle Classification Smart Detection Area Intrusion, Line-Crossing, Object Abandoned/Removal, Video Tampering Smart Video Smart IR, WDR, 3D DNR, Night Vision Video Compression H.265+ / H.265 / H.264+ / H.264 Power Supply PoE (802.3af) or 12V DC Ingress Protection IP67 (weatherproof) / IK10 (vandal-proof) Management VIGI App, VIGI NVR, VIGI Security Manager, Web UI Weight Approx. 460g Warranty 2 Years Recommended Accessories TP-Link VIGI NVR1104H-4P — 4-channel PoE+ NVR for centralised recording and AI event management across multiple VIGI cameras. TP-Link TL-POE260S 2.5G PoE+ Injector — Powers the C240I via a single Ethernet cable from any non-PoE switch or router. MicroSD Card (Class 10 / U3) — Enables standalone on-camera recording without an NVR (check supported capacity in datasheet). Cat6 Ethernet Cable — For reliable PoE data and power delivery to the camera installation point. Junction Box / Surface Mount Adapter — Provides a clean, weatherproof cable entry point for wall or ceiling installations. Downloads VIGI C240I Datasheet (PDF) Frequently Asked Questions What is the difference between the VIGI C240I and the VIGI C240? The VIGI C240I uses infrared (IR) night vision, producing black-and-white footage in low-light and dark conditions. The VIGI C240 uses full-colour night vision with spotlight LEDs, producing colour footage in complete darkness. The C240I is typically preferred for installations where the spotlight LEDs of a full-colour camera would be intrusive or unwanted, such as in residential areas or discreet commercial monitoring. Does the VIGI C240I work without an NVR? Yes. The C240I supports standalone operation with local recording to a microSD card and remote management via the VIGI app or web browser. A VIGI NVR is optional but recommended for multi-camera deployments requiring centralised recording, playback, and AI event management. What PoE standard does this camera require? The VIGI C240I is powered by IEEE 802.3af PoE, which is the standard supported by most PoE switches and NVRs. It also accepts 12V DC power if PoE is not available at the installation point. How does AI human and vehicle detection reduce false alarms? The on-board AI chip analyses motion events in real time and classifies them as human, vehicle, or other. Only human and vehicle events trigger push notifications, so you won’t receive alerts for a cat walking past, a tree branch moving, or a change in lighting — significantly reducing alarm fatigue on busy commercial sites. Is the IK10 rating important for my installation? IK10 is the highest impact protection rating, meaning the camera housing can withstand a 20-joule impact — equivalent to a 5kg weight dropped from 40cm. This is important for installations in car parks, stairwells, public toilets, and any location where the camera may be subject to deliberate tampering or accidental impact. Can I integrate the VIGI C240I with third-party NVRs? The VIGI C240I supports ONVIF, allowing basic integration with compatible third-party NVRs and VMS platforms. Full AI features including human/vehicle classification and smart detection events are only available within the TP-Link VIGI ecosystem.

Read more less

TP-Link VIGI C240I 4MP IR Dome Network Camera (4mm Lens) 4MP AI-Powered IR Dome Camera for Indoor & Outdoor Security The TP-Link VIGI C240I is a 4MP Super-HD IR dome network camera with AI-powered human and vehicle classification, smart detection, and IK10 vandal-proof, IP67 weatherproof construction. Designed for professional surveillance installations, it delivers sharp 2K-class footage day and night, supports PoE or 12V DC power, and integrates seamlessly with VIGI NVRs and the VIGI app for flexible management. The 4mm lens version is suited to medium-range monitoring of corridors, car parks, retail floors, and building entrances. Key Features 4MP Super-HD resolution — captures fine detail for reliable identification AI Human & Vehicle Classification — reduces false alarms by distinguishing people and vehicles from other motion triggers Smart Detection — line crossing, intrusion detection, object removal/abandonment, and camera obstruction alerts IK10 vandal-proof housing — resists physical impact for high-risk or public-facing installations IP67 weatherproof — fully protected against dust and heavy rain for outdoor deployment H.265+ compression — reduces storage and bandwidth requirements without sacrificing image quality Smart IR night vision — adaptive infrared for clear footage in low-light and zero-light conditions WDR, 3D DNR — improved image quality in high-contrast and low-light environments PoE (802.3af) or 12V DC power — flexible installation options 4mm fixed lens — suitable for medium-range monitoring in open spaces and car parks Managed via web UI, NVR UI, VIGI app, and VIGI Security Manager Use Cases Car Parks & Driveways: The 4mm lens provides a balanced field of view for monitoring vehicle movement and capturing number plates at medium range. Building Entrances & Lobbies: AI human detection and smart intrusion alerts notify security staff of unauthorised access in real time. Retail & Warehouses: Vandal-proof IK10 housing protects the camera in high-traffic or high-risk environments where tampering is a concern. Outdoor Perimeters: IP67 weatherproofing ensures reliable operation in Australian outdoor conditions including rain, dust, and heat. Commercial CCTV Systems: Integrates with VIGI NVRs (including NVR1004H-4P, NVR1008H-8MP, NVR1016H) for centralised recording and management. Specifications Specification Detail Model VIGI C240I (4mm) Resolution 4MP (2560 × 1440) Lens 4mm fixed focal length Night Vision Smart IR — infrared illumination Video Compression H.265+ / H.265 / H.264+ / H.264 Smart Detection Line crossing, intrusion, object removal/abandonment, camera obstruction AI Classification Human & vehicle detection Image Enhancement WDR, 3D DNR, Smart IR Ingress Protection IP67 (weatherproof) + IK10 (vandal-proof) Power Supply PoE (802.3af) or 12V DC Management Web UI, NVR UI, VIGI App, VIGI Security Manager ONVIF Supported Weight 0.54 kg Downloads VIGI C240I Datasheet (PDF) Frequently Asked Questions What is the difference between the 2.8mm and 4mm lens versions? The 2.8mm lens provides a wider field of view, making it better suited for enclosed spaces like corridors, lifts, and small rooms. The 4mm lens has a narrower field of view but greater reach, making it more suitable for car parks, driveways, and open areas where you need to see further into the scene. Does the VIGI C240I work with non-VIGI NVRs? Yes. The C240I is ONVIF-compliant and can be added to any ONVIF-compatible NVR. However, AI smart detection features such as human/vehicle classification and smart event alerts are fully supported only when used with a VIGI NVR or the VIGI app. Can I power the camera without a PoE switch? Yes. The C240I supports both PoE (802.3af) and 12V DC power. If you don’t have a PoE switch, you can use a standard 12V DC power adapter (sold separately) to power the camera directly. Is the C240I suitable for outdoor installation in Australia? Yes. The IP67 rating provides full protection against dust ingress and heavy rain, making it suitable for outdoor installation in Australian conditions. The IK10 vandal-proof housing also protects against physical impact. How do I access the camera remotely? Download the free VIGI app on iOS or Android and log in with your TP-Link ID. You can view live feeds, review recordings, and manage camera settings from anywhere with an internet connection. The VIGI Security Manager desktop application is also available for PC-based management.

Read more less

TP-Link VIGI C240 4MP Full-Colour Dome Network Camera (2.8mm) The TP-Link VIGI C240 (2.8mm) is a 4MP full-colour dome IP camera that delivers 24-hour colour surveillance — even in complete darkness — using a large-aperture lens, high-sensitivity sensor, and built-in supplemental white light LEDs. Unlike IR cameras that switch to black-and-white at night, the C240 maintains full-colour footage around the clock, making it significantly easier to identify clothing colours, vehicle colours, and other critical details in after-hours incidents. With AI human and vehicle classification, smart detection, IK10 vandal-proof and IP67 weatherproof housing, a built-in microphone, and PoE or 12V DC power, it’s a versatile indoor/outdoor dome camera suited to retail, commercial, and residential installations across Australia. Full-Colour vs IR Night Vision — What’s the Difference? Feature VIGI C240 Full-Colour (This Model) VIGI C240I IR Night Vision Full colour (white light LEDs) Black & white (infrared LEDs) Colour at Night Yes — 24 hours No — greyscale only Deterrence Visible white light acts as deterrent Discreet — IR invisible to naked eye Best For Retail, car parks, entrances, high-incident areas Discreet monitoring, long-range outdoor Key Features 4MP Full-Colour 24h Surveillance — 2560×1440 resolution with full-colour footage day and night — large-aperture lens, high-sensitivity sensor, and white light LEDs maintain colour even in complete darkness. 2.8mm Wide-Angle Lens — Wide field of view ideal for covering entrances, reception areas, retail floors, car parks, and open indoor/outdoor spaces where broad coverage is required. AI Human & Vehicle Classification — On-board AI distinguishes people and vehicles from other motion triggers, dramatically reducing false alarms from animals, foliage, or lighting changes. Smart Detection — Detects area intrusion, line-crossing, object abandoned/removal, and video tampering, with instant push notifications to the VIGI app. Built-In Microphone — Records audio within approximately 5 metres of the camera for more detailed incident monitoring and evidence capture. IK10 Vandal-Proof — Impact-resistant dome housing rated IK10 — withstands deliberate physical attack, suitable for high-risk public and commercial environments. IP67 Weatherproof — Fully sealed against dust and heavy rain for reliable outdoor performance in all Australian weather conditions. Smart Video Enhancement — WDR, 3D DNR, and Smart IR processing ensure clear footage in high-contrast and challenging lighting conditions. H.265+ Compression — Reduces bandwidth and storage requirements by up to 50% compared to H.264 without sacrificing image quality. PoE or 12V DC Power — Single-cable PoE installation via RJ45, or 12V DC adaptor where PoE is not available. MicroSD Card Slot — Supports up to 256GB microSD for standalone on-camera recording without an NVR. Flexible Management — Manage via VIGI App (iOS/Android), VIGI NVR, VIGI Security Manager (PC), or web browser UI. Use Cases Retail stores and shopping centres — full-colour night footage for after-hours incident identification and loss prevention Car parks and driveways — colour vehicle identification at night for access control and incident investigation Building entrances and reception areas — wide 2.8mm coverage with colour facial and clothing detail Restaurants, cafes, and hospitality venues — discreet dome form factor with 24h colour monitoring Warehouses and commercial properties — IK10 vandal-proof housing for high-risk environments Residential properties — outdoor colour surveillance with visible white light deterrence Technical Specifications Specification Detail Model VIGI C240 (2.8mm) Resolution 4MP (2560 × 1440) Lens 2.8mm Fixed (also available in 4mm) Form Factor Dome (indoor/outdoor) Night Vision Full-colour 24h (white light LEDs) AI Detection Human & Vehicle Classification Smart Detection Area Intrusion, Line-Crossing, Object Abandoned/Removal, Video Tampering Audio Built-in microphone (~5m range) Smart Video WDR, 3D DNR, Smart IR Video Compression H.265+ / H.265 / H.264+ / H.264 Local Storage MicroSD card slot (up to 256GB) Power Supply PoE (802.3af) or 12V DC Vandal Rating IK10 Weather Rating IP67 Management VIGI App, VIGI NVR, VIGI Security Manager, Web UI Weight Approx. 460g Warranty 2 Years Recommended Accessories TP-Link VIGI NVR1104H-4P — 4-channel PoE+ NVR for centralised recording and AI event management of up to 4 VIGI cameras including the C240. TP-Link TL-SG105MPE 5-Port Gigabit PoE+ Smart Switch — Powers the C240 via a single Ethernet cable from a compact 5-port PoE switch alongside other VIGI cameras. MicroSD Card (Class 10 / U3, up to 256GB) — Enables standalone on-camera recording without an NVR. Cat6 Ethernet Cable — For reliable PoE data and power delivery; Cat6 recommended for runs over 50m. TP-Link VIGI C240 (4mm) — The 4mm variant of the same camera for longer-range coverage in corridors, car parks, and larger spaces. Downloads VIGI C240 Datasheet (PDF) Frequently Asked Questions What is the difference between the VIGI C240 and the VIGI C240I? The VIGI C240 uses full-colour night vision with white light LEDs, producing colour footage in complete darkness. The VIGI C240I uses infrared (IR) LEDs, producing black-and-white footage in low-light and dark conditions. The C240 is preferred where colour detail at night is important for identification — such as retail, car parks, and entrances. The C240I is preferred where discreet monitoring is required, as the IR LEDs are invisible to the naked eye. Does the white light turn on automatically at night? Yes. The VIGI C240’s white light LEDs activate automatically when the camera detects low-light conditions, providing full-colour illumination. The sensitivity threshold can be adjusted via the VIGI app or web UI. The visible white light also acts as a deterrent to potential intruders. Is the VIGI C240 suitable for outdoor installation in Australia? Yes. The VIGI C240 carries an IP67 weatherproof rating — fully sealed against dust ingress and heavy rain — and an IK10 vandal-proof rating for impact resistance. It is suitable for outdoor installation in all Australian weather conditions including coastal, tropical, and high-UV environments. Ensure the mounting surface and cable entry point are also appropriately sealed for outdoor use. Can the VIGI C240 record without an NVR? Yes. The C240 supports standalone on-camera recording to a microSD card (up to 256GB) and remote management via the VIGI app or web browser. A VIGI NVR is optional but recommended for multi-camera deployments requiring centralised recording, playback, and AI event management. What is the 2.8mm lens field of view suitable for? The 2.8mm lens provides a wide field of view — approximately 100–110 degrees horizontal — making it ideal for covering large areas at close to medium range, such as retail floors, reception areas, car park bays, and building entrances. For longer-range coverage of corridors, driveways, or perimeter fencing, the 4mm variant provides a narrower field of view with greater effective range.

Read more less

TP-Link VIGI C240 4MP Full-Colour Dome Network Camera (4mm Lens) 24-Hour Full-Colour Surveillance with AI Smart Detection The TP-Link VIGI C240 is a 4MP full-colour dome network camera that delivers vivid, colour footage around the clock — even in complete darkness. Equipped with a large-aperture lens, high-sensitivity sensor, and supplemental white light, it captures colour detail that standard IR cameras miss at night. Add AI-powered human and vehicle classification, smart detection, IK10 vandal-proof and IP67 weatherproof construction, a built-in microphone, and onboard SD card storage, and the C240 is a comprehensive surveillance solution for Australian businesses and commercial installations. Key Features 4MP Super-HD resolution — sharp, detailed footage for reliable identification 24-hour full-colour night vision — large-aperture lens, high-sensitivity sensor, and supplemental white light deliver colour footage in pitch-black conditions AI Human & Vehicle Classification — reduces false alarms by distinguishing people and vehicles from other motion triggers Smart Detection — line crossing, intrusion detection, object removal/abandonment, and camera obstruction alerts Built-in microphone — records audio within approximately 4.5 m radius for enhanced situational awareness IK10 vandal-proof housing — resists physical impact for high-risk or public-facing installations IP67 weatherproof — fully protected against dust and heavy rain for outdoor deployment H.265+ compression — reduces storage and bandwidth without sacrificing image quality WDR, 3D DNR, Smart IR — professional video enhancement for challenging lighting conditions PoE (802.3af) or 12V DC power — flexible installation options Onboard SD card slot — local storage up to 256 GB (card not included) Side cable outlet — enables clean installation into dropped ceilings without drilling Managed via web UI, NVR UI, VIGI app, and VIGI Security Manager Use Cases Car Parks & Driveways: Full-colour night vision captures vehicle colours and number plate details that IR-only cameras miss in low light. Building Entrances & Lobbies: AI human detection and smart intrusion alerts provide real-time notifications of unauthorised access, with audio recording for added context. Retail Stores & Warehouses: IK10 vandal-proof housing protects the camera in high-traffic environments; full-colour footage aids in incident investigation. Outdoor Perimeters: IP67 weatherproofing ensures reliable operation in Australian outdoor conditions including rain, dust, and heat. Commercial CCTV Systems: Integrates with VIGI NVRs (NVR1004H-4P, NVR1008H-8MP, NVR1016H) for centralised recording, playback, and management. Specifications Specification Detail Model VIGI C240 (4mm) Resolution 4MP (2560 × 1440) Lens 4mm fixed focal length, large aperture Night Vision 24-hour full-colour — supplemental white light + high-sensitivity sensor Video Compression H.265+ / H.265 / H.264+ / H.264 AI Classification Human & vehicle detection Smart Detection Line crossing, intrusion, object removal/abandonment, camera obstruction Audio Built-in microphone (~4.5 m radius) Image Enhancement WDR, 3D DNR, Smart IR Ingress Protection IP67 (weatherproof) + IK10 (vandal-proof) Power Supply PoE (802.3af) or 12V DC Local Storage SD card slot — up to 256 GB (card not included) Management Web UI, NVR UI, VIGI App, VIGI Security Manager ONVIF Supported Weight 0.54 kg Downloads VIGI C240 Datasheet (PDF) Frequently Asked Questions What is the difference between the VIGI C240 and the VIGI C240I? The VIGI C240 features 24-hour full-colour night vision using supplemental white light, delivering colour footage even in complete darkness. The VIGI C240I uses traditional infrared (IR) night vision, which produces black-and-white footage in low light. Choose the C240 where colour detail at night is important (e.g., vehicle colour, clothing colour); choose the C240I where you prefer discreet, low-visibility night illumination. Does the full-colour mode activate automatically at night? Yes. The camera automatically activates its supplemental white light and switches to full-colour mode when ambient light drops below a set threshold. This can be configured via the VIGI app or web UI. Can I power the camera without a PoE switch? Yes. The C240 supports both PoE (802.3af) and 12V DC power. If you don’t have a PoE switch, you can use a standard 12V DC power adapter (sold separately) to power the camera directly. Does the built-in microphone record audio continuously? Yes, when audio recording is enabled in the camera settings, the built-in microphone records audio continuously alongside the video stream. Audio recording can be enabled or disabled via the web UI or VIGI app. Is the C240 compatible with non-VIGI NVRs? Yes. The C240 is ONVIF-compliant and can be added to any ONVIF-compatible NVR. AI smart detection features such as human/vehicle classification and smart event alerts are fully supported only when used with a VIGI NVR or the VIGI app. How much local storage can I add? The C240 has an onboard SD card slot supporting cards up to 256 GB. This allows continuous or event-triggered local recording directly on the camera, independent of an NVR.

Read more less

24/7 Full-Colour Surveillance with Intelligent Pan Tilt Control The TP-Link VIGI C540S is a professional-grade 4MP outdoor Pan Tilt network camera built for businesses and installers who demand reliable, round-the-clock visibility. Powered by TP-Link's industry-leading ColourPro Night Vision technology, the C540S captures vivid full-colour footage even in near-total darkness — without the need for supplemental lighting. Combine that with 360° pan tilt coverage, advanced AI analytics, and straightforward PoE installation, and you have a camera that works as hard as your business does. Key Features ColourPro Night Vision — Delivers sharp, full-colour 4MP images in ultra-low light conditions with no spotlights required, reducing light pollution and improving image clarity beyond standard IR cameras 360° Pan Tilt Coverage — Eliminates blind spots with full horizontal rotation and customisable patrol routes (up to 8 preset points per route) Automatic Tracking — Automatically follows persons or vehicles of interest for seamless, uninterrupted footage Human & Vehicle Classification — AI chips distinguish people and vehicles from other motion, reducing false alarms and delivering more relevant notifications Smart Detection — Detects area intrusion and line-crossing events, triggering instant alerts to your device Active Defence — Deters intruders in real time with built-in sound and light warnings when abnormal events are detected Face Recognition — Captures and matches facial data against a stored library to support access management and attendance control People & Vehicle Analytics — Filter footage by attributes such as clothing colour, hair length, vehicle type, and colour to locate events quickly Two-Way Audio — Built-in microphone and speaker support live voice intercom from anywhere via the VIGI app True WDR Technology — Produces clear images in high-contrast scenes such as entrances with bright backlighting H.265+ Compression — Reduces video file size without sacrificing quality, lowering storage and bandwidth costs PoE Powered — Single Ethernet cable carries both data and power, simplifying cable runs and reducing installation time IP66 Weatherproof — Rated for reliable outdoor performance in rain, dust, and harsh Australian conditions Flexible Storage — Supports onboard microSD card storage up to 256GB plus NVR/NAS network storage options Typical Use Cases Retail stores and shopping centres requiring wide-area coverage from a single camera Warehouses and logistics facilities needing automatic tracking across large open spaces Car parks and driveways where vehicle detection and licence plate visibility are priorities Building entrances and reception areas utilising face recognition for access control Schools, aged care facilities, and hospitality venues requiring discreet but comprehensive monitoring Residential properties with large outdoor areas such as acreage, farms, or multi-building sites Technical Specifications Specification Detail Model VIGI C540S (4mm) Resolution 4MP (2560 × 1440) Lens 4mm fixed focal length Night Vision ColourPro (full-colour ultra-low light, no IR) Pan / Tilt Range 360° pan / 90° tilt AI Features Human & Vehicle Classification, Face Recognition, People & Vehicle Analytics, Auto Tracking, Intrusion Detection, Line Crossing Active Defence Built-in siren and strobe light Audio Two-way audio (built-in mic & speaker) Video Compression H.265+ / H.265 / H.264+ / H.264 WDR True WDR Power PoE (IEEE 802.3af/at) Weatherproofing IP66 Local Storage MicroSD up to 256GB Network Storage NVR / NAS compatible Patrol Routes Up to 8 preset points per route Barcode (EAN) 4895252503098 SKU VIGI C540S(4mm) Downloads VIGI C540S Datasheet (PDF) Frequently Asked Questions Does the VIGI C540S work in complete darkness? Yes. ColourPro Night Vision is designed for ultra-low light environments and produces full-colour images without any supplemental lighting. It outperforms both standard IR cameras (which produce black-and-white images) and conventional full-colour cameras (which require bright spotlights) in low-light conditions. What PoE standard does the C540S require? The camera is powered via PoE (IEEE 802.3af/at). A compatible PoE switch or PoE injector is required. For high-wattage PoE injectors, see the TP-Link TL-POE170S available in our store. Can I use this camera without an NVR? Yes. The C540S supports onboard microSD storage (up to 256GB) and can be managed directly via the VIGI app or VIGI Security Manager software on a PC — no NVR is required for standalone deployments. How does automatic tracking work? When a person or vehicle enters the camera's field of view, the AI tracking algorithm locks onto the subject and moves the pan tilt mechanism to follow them across the scene, maintaining continuous footage without manual intervention. Is face recognition available out of the box? Face recognition requires configuration through the VIGI NVR or VIGI Security Manager software, where you build and manage the face library. It is not enabled by default and requires initial setup by an installer or IT administrator. What is the IP66 rating? IP66 means the camera is fully protected against dust ingress and powerful water jets from any direction. It is suitable for exposed outdoor installations in Australian conditions including rain, humidity, and dust.

Read more less

24/7 Full-Colour 5MP Surveillance with AI Detection — Indoors & Out The TP-Link VIGI C250 is a professional-grade 5MP full-colour dome IP camera designed for businesses and installers who need reliable, high-detail surveillance around the clock. With a large-aperture lens, high-sensitivity sensor, and built-in supplemental lighting, it delivers vivid colour footage even in complete darkness — no grainy black-and-white night vision. Add AI-powered human and vehicle detection, IK10 vandal-proof housing, and IP67 weatherproofing, and you have a camera built to perform in demanding Australian commercial environments. Key Features 5MP Super-High Definition — Captures fine detail — faces, number plates, and signage — with over 5 megapixels of resolution for clear, evidential-quality footage. 24/7 Full-Colour Night Vision — Large-aperture lens, high-sensitivity image sensor, and built-in supplemental lights deliver full-colour video in pitch-black conditions — not just during daylight hours. AI Human & Vehicle Classification — On-board AI distinguishes people and vehicles from other motion triggers, dramatically reducing false alarms from animals, foliage, or lighting changes. Smart Detection — Area Intrusion & Line Crossing — Define virtual zones and tripwires; receive instant alerts when a person or vehicle crosses them. People & Vehicle Analytics — Search recorded footage by attributes such as gender, clothing colour, hair length, vehicle type, and vehicle colour to quickly locate events of interest. Built-In Microphone — Records audio within approximately 4.5m of the camera for more complete situational awareness. IK10 Vandal-Proof & IP67 Weatherproof — Rugged dome housing withstands deliberate impact and is fully sealed against dust and rain — suitable for exposed outdoor locations. H.265+ Compression — Reduces storage and bandwidth requirements by up to 50% compared to H.264 without sacrificing image quality. Smart Video Enhancement — True WDR, 3D DNR, Smart IR, and Night Vision processing ensure clear footage in high-contrast and low-light scenes. PoE or 12V DC Power — Flexible power options: run a single Cat5e/6 cable for data and power via PoE, or use a 12V DC adaptor where PoE is not available. Local SD Card Storage — Onboard microSD slot supports up to 256GB for standalone recording without an NVR. Flexible Management — Manage via the VIGI app (iOS/Android), VIGI Security Manager (PC), web browser UI, or any compatible VIGI NVR. Flexible Cable Routing — Route cable through the ceiling or via the side outlet for clean, low-profile installations. Use Cases Retail & Shopfronts — Monitor entrances, aisles, and cash areas with full-colour detail and AI alerts for after-hours intrusion. Warehouses & Industrial Sites — IK10 and IP67 ratings make it suitable for dusty, wet, or high-traffic areas where cameras are at risk of damage. Car Parks & Driveways — Vehicle analytics and line-crossing detection provide automated alerts for unauthorised access or suspicious activity. Office Buildings & Reception Areas — Dome form factor blends into ceiling environments; built-in mic captures audio for complete monitoring. Schools & Childcare Centres — People analytics and area intrusion detection support duty-of-care monitoring across large campuses. Residential Properties — Full-colour night vision and smart alerts provide homeowners with clear, actionable footage without false alarm fatigue. Technical Specifications Specification Detail Model VIGI C250 (2.8mm) Resolution 5MP (2880 × 1620) Lens 2.8mm fixed focal length Night Vision 24/7 Full-Colour (supplemental white light) AI Detection Human & Vehicle Classification, Area Intrusion, Line Crossing Analytics People & Vehicle Attribute Search Audio Built-in microphone (~4.5m range) Video Compression H.265+ / H.265 / H.264+ / H.264 Smart Video True WDR, 3D DNR, Smart IR, Night Vision Power Supply PoE (802.3af) or 12V DC Local Storage microSD slot, up to 256GB (card sold separately) Ingress Protection IP67 (weatherproof) / IK10 (vandal-proof) Form Factor Dome (indoor/outdoor) Management VIGI App, VIGI Security Manager, Web UI, VIGI NVR Weight 460g Vendor TP-Link Downloads 📄 Download VIGI C250 Datasheet (PDF) Frequently Asked Questions What is the difference between full-colour night vision and standard IR night vision? Standard IR night vision switches to black-and-white in low light, which can make it difficult to identify clothing colours, vehicle colours, or other distinguishing details. The VIGI C250's full-colour night vision uses built-in supplemental white lights and a high-sensitivity sensor to maintain vivid colour footage in complete darkness — providing far more useful evidential footage. Does the VIGI C250 work without an NVR? Yes. The camera can operate as a standalone unit, recording directly to a microSD card (up to 256GB, sold separately) and managed via the VIGI app or web browser. For multi-camera deployments, pairing with a VIGI NVR provides centralised recording, playback, and AI event management. What PoE standard does this camera require? The VIGI C250 is powered by IEEE 802.3af PoE, which is the standard supported by most PoE switches and NVRs. It also accepts 12V DC power if PoE is not available at the installation point. Is the 2.8mm lens suitable for indoor and outdoor use? Yes. The 2.8mm focal length provides a wide field of view, making it ideal for monitoring large indoor areas such as retail floors, reception areas, and warehouses, as well as outdoor areas like building entrances and car parks. For longer-distance or narrower-angle coverage, a 4mm lens variant is also available. How does AI human and vehicle detection reduce false alarms? The on-board AI chip analyses motion events in real time and classifies them as human, vehicle, or other. Only human and vehicle events trigger push notifications, so you won't receive alerts for a cat walking past, a tree branch moving, or a change in lighting — significantly reducing alarm fatigue. Can I integrate the VIGI C250 with third-party NVRs or VMS platforms? The VIGI C250 is an ONVIF-compatible IP camera, which means it can be integrated with most third-party NVRs and video management systems that support the ONVIF protocol. Full AI features (smart detection, analytics) are only available when used within the VIGI ecosystem.

Read more less

5MP Full-Colour Surveillance with a 4mm Lens — Balanced Range & Detail for Commercial Installations The TP-Link VIGI C250 (4mm) is a professional-grade 5MP full-colour dome IP camera designed for installers and businesses that need clear, detailed footage at medium range — day and night. The 4mm fixed focal length delivers a narrower field of view than the 2.8mm variant, making it the preferred choice for monitoring corridors, building entrances, car park lanes, and perimeter fencing where you need to identify faces and number plates at greater distances. With 24/7 full-colour night vision, AI human and vehicle detection, IK10 vandal-proof housing, and IP67 weatherproofing, it’s built for demanding Australian commercial environments. 4mm vs 2.8mm — Which Lens Do I Need? Feature 2.8mm Lens 4mm Lens (This Model) Field of View Wider — suits large open areas Narrower — suits corridors & entrances Effective Range Shorter — best within ~8m Longer — effective to ~12m+ Best For Retail floors, reception, warehouses Corridors, entrances, car parks, perimeters Key Features 5MP Super-High Definition — Captures fine detail — faces, number plates, and signage — with over 5 megapixels of resolution for clear, evidential-quality footage. 4mm Fixed Focal Length — Provides a balanced field of view suited to corridors, building entrances, car park lanes, and perimeter monitoring where subject distance is greater than typical wide-angle deployments. 24/7 Full-Colour Night Vision — Large-aperture lens, high-sensitivity image sensor, and built-in supplemental lights deliver full-colour video in complete darkness — not black-and-white IR footage. AI Human & Vehicle Classification — On-board AI distinguishes people and vehicles from other motion triggers, dramatically reducing false alarms from animals, foliage, or lighting changes. Smart Detection — Area Intrusion & Line Crossing — Define virtual zones and tripwires; receive instant alerts when a person or vehicle crosses them. People & Vehicle Analytics — Search recorded footage by attributes such as gender, clothing colour, hair length, vehicle type, and vehicle colour to quickly locate events of interest. Built-In Microphone — Records audio within approximately 4.5m of the camera for more complete situational awareness. IK10 Vandal-Proof & IP67 Weatherproof — Rugged dome housing withstands deliberate impact and is fully sealed against dust and rain — suitable for exposed outdoor locations. H.265+ Compression — Reduces storage and bandwidth requirements by up to 50% compared to H.264 without sacrificing image quality. Smart Video Enhancement — True WDR, 3D DNR, Smart IR, and Night Vision processing ensure clear footage in high-contrast and low-light scenes. PoE or 12V DC Power — Run a single Cat5e/6 cable for data and power via PoE, or use a 12V DC adaptor where PoE is not available. Local SD Card Storage — Onboard microSD slot supports up to 256GB for standalone recording without an NVR. Flexible Management — Manage via the VIGI app (iOS/Android), VIGI Security Manager (PC), web browser UI, or any compatible VIGI NVR. Flexible Cable Routing — Route cable through the ceiling or via the side outlet for clean, low-profile installations. Use Cases Building Entrances & Lobbies — The 4mm lens captures clear facial detail at entry distances typical of doorways and reception areas, improving identification capability. Corridors & Hallways — Narrower field of view covers the length of a corridor effectively, reducing the number of cameras required per run. Car Parks & Driveways — Effective number plate capture at greater distances compared to a 2.8mm lens. Vehicle analytics and line-crossing detection provide automated alerts for unauthorised access. Perimeter & Fence Lines — Monitor boundary lines and gates where subjects are further from the camera mounting point. Retail & Warehouses — Suitable for aisle monitoring and loading dock coverage where a longer effective range is needed. Schools & Commercial Properties — People analytics and area intrusion detection support duty-of-care and after-hours security monitoring. Technical Specifications Specification Detail Model VIGI C250 (4mm) Resolution 5MP (2880 × 1620) Lens 4mm fixed focal length Night Vision 24/7 Full-Colour (supplemental white light) AI Detection Human & Vehicle Classification, Area Intrusion, Line Crossing Analytics People & Vehicle Attribute Search Audio Built-in microphone (~4.5m range) Video Compression H.265+ / H.265 / H.264+ / H.264 Smart Video True WDR, 3D DNR, Smart IR, Night Vision Power Supply PoE (802.3af) or 12V DC Local Storage microSD slot, up to 256GB (card sold separately) Ingress Protection IP67 (weatherproof) / IK10 (vandal-proof) Form Factor Dome (indoor/outdoor) Management VIGI App, VIGI Security Manager, Web UI, VIGI NVR Weight 380g Warranty 2 Years Recommended Accessories TP-Link VIGI NVR1104H-4P — 4-channel PoE+ NVR for centralised recording and AI event management across multiple VIGI cameras. TP-Link TL-POE260S 2.5G PoE+ Injector — Powers the C250 via a single Ethernet cable from any non-PoE switch or router. MicroSD Card (Class 10 / U3, up to 256GB) — Enables standalone on-camera recording without an NVR. Cat6 Ethernet Cable — For reliable PoE data and power delivery to the camera installation point. Junction Box / Surface Mount Adapter — Provides a clean, weatherproof cable entry point for wall or ceiling installations. Downloads VIGI C250 Datasheet (PDF) Frequently Asked Questions What is the practical difference between the 2.8mm and 4mm lens versions? The 2.8mm lens has a wider field of view, making it ideal for monitoring large open areas like retail floors, reception areas, and warehouses at close to medium range. The 4mm lens has a narrower field of view with a longer effective range, making it better suited for corridors, building entrances, car park lanes, and perimeter fencing where subjects are further from the camera. If you’re unsure, the 4mm is generally the safer choice for outdoor and entrance monitoring. Does the VIGI C250 work without an NVR? Yes. The camera can operate as a standalone unit, recording directly to a microSD card (up to 256GB, sold separately) and managed via the VIGI app or web browser. For multi-camera deployments, pairing with a VIGI NVR provides centralised recording, playback, and AI event management. What PoE standard does this camera require? The VIGI C250 is powered by IEEE 802.3af PoE, which is the standard supported by most PoE switches and NVRs. It also accepts 12V DC power if PoE is not available at the installation point. How does AI human and vehicle detection reduce false alarms? The on-board AI chip analyses motion events in real time and classifies them as human, vehicle, or other. Only human and vehicle events trigger push notifications, so you won’t receive alerts for a cat walking past, a tree branch moving, or a change in lighting — significantly reducing alarm fatigue on busy sites. Can I integrate the VIGI C250 with third-party NVRs or VMS platforms? The VIGI C250 is an ONVIF-compatible IP camera, which means it can be integrated with most third-party NVRs and video management systems that support the ONVIF protocol. Full AI features (smart detection, analytics) are only available when used within the VIGI ecosystem. Is this camera suitable for number plate capture in a car park? The 4mm lens is better suited to number plate capture than the 2.8mm variant due to its longer effective range and narrower field of view. For dedicated licence plate recognition (LPR) applications, a varifocal or purpose-built LPR camera is recommended. The VIGI C250 (4mm) provides good general-purpose car park coverage with vehicle analytics for identifying vehicle type and colour.

Read more less

5MP Full-Colour Outdoor Bullet Camera with AI Analytics, Active Defence and IP67 Weatherproofing The TP-Link VIGI C350 is a 5MP full-colour outdoor bullet network camera that delivers vivid, colour footage around the clock — including in complete darkness — using a high-sensitivity large-aperture sensor and built-in spotlight LEDs. Available in 2.8mm, 4mm, and 6mm fixed lens options, it combines AI-powered People & Vehicle Analytics, smart detection, active defence, two-way audio, and local SD card storage up to 256GB in a robust IP67-rated bullet housing. Purpose-built for commercial CCTV, retail, and high-security outdoor installations across Australia. Key Features 5MP Super-High Definition: Captures detailed 5MP footage for reliable identification of faces, clothing colours, licence plates, and fine details at a distance — significantly sharper than 4MP or 1080p cameras. 24/7 Full-Colour Night Vision: Built-in spotlight LEDs and a high-sensitivity large-aperture sensor deliver full-colour footage in complete darkness — no black-and-white switching at night, ever. AI People & Vehicle Analytics: Search recorded footage rapidly by filtering people by hair length and clothing attributes, or vehicles by colour and type — dramatically reducing investigation time after an incident. Human & Vehicle Classification: AI-powered detection distinguishes humans and vehicles from other motion sources (animals, foliage), reducing false alerts and improving notification accuracy. Smart Detection: Configurable smart events including Line Crossing, Area Intrusion, and Camera Tamper Detection — with instant push notifications to the VIGI app. Active Defence: Automatically triggers sound and light alarms when abnormal events are detected — warning and deterring potential intruders in real time without manual intervention. Two-Way Audio: Built-in microphone and speaker allow real-time voice intercom through the camera — useful for deterring intruders or communicating with visitors remotely. IP67 Weatherproof: Fully dust-tight and protected against water jets — suitable for permanent outdoor installation in Australian conditions including rain, coastal humidity, and dust. H.265+ Compression: Reduces storage consumption and network bandwidth by up to 50% compared to H.264 without sacrificing image quality. True WDR, 3D DNR & Smart IR: Advanced video enhancement for challenging lighting conditions including backlit scenes, high-contrast environments, and low-light areas. Local SD Card Storage (up to 256GB): Onboard microSD slot for local recording independent of an NVR — useful for standalone deployments or as a backup recording source. PoE Powered: Connect via a single PoE Ethernet cable for clean, simple installation — data and power over one cable, no separate power adapter required. Flexible Management: Manage via VIGI NVR UI, web browser, VIGI app (iOS & Android), or VIGI Security Manager desktop software. Lens Options 2.8mm: Wide field of view — ideal for covering large areas at close range such as building entrances, car parks, and open outdoor spaces. 4mm: Balanced field of view — suitable for driveways, medium-distance outdoor monitoring, and general perimeter surveillance. 6mm: Narrower, longer-range view — ideal for monitoring specific points such as gates, laneways, and distant areas where more detail at range is needed. Common Use Cases Commercial property perimeter and car park surveillance requiring 24/7 colour footage Retail store exteriors and loading docks with AI analytics for rapid incident investigation Building entrances and driveways where vehicle colour and type identification is critical Warehouses and industrial sites requiring active deterrence with sound and light alarms High-security residential properties where 5MP colour detail improves identification Standalone deployments with local 256GB SD card recording (no NVR required) Technical Specifications Model VIGI C350 Resolution 5MP Lens Options 2.8mm / 4mm / 6mm (fixed) Camera Type Full-Colour Outdoor Bullet Night Vision Full-colour 24/7 (spotlight LEDs) AI Analytics People & Vehicle Analytics (hair, clothing, vehicle colour/type) AI Classification Human & Vehicle Smart Detection Line Crossing, Area Intrusion, Camera Tamper Active Defence Yes (sound & light alarm) Two-Way Audio Yes (built-in mic & speaker) Video Compression H.265+ / H.265 / H.264+ / H.264 Video Enhancement True WDR, 3D DNR, Smart IR Weatherproofing IP67 Local Storage microSD up to 256GB Power Supply PoE (IEEE 802.3af) Network Interface RJ45 10/100Mbps Management VIGI NVR, Web UI, VIGI App, VIGI Security Manager ONVIF Yes Downloads VIGI C350 Datasheet — All Lens Variants (PDF) Frequently Asked Questions What is the difference between the VIGI C350 (bullet) and the VIGI C450 (turret)? The VIGI C350 is an outdoor bullet-style camera with a longer housing designed for directional wall or eave mounting — the bullet form factor provides a visible deterrent and is ideal for perimeter and long-distance outdoor monitoring. The VIGI C450 is a turret-style camera with a lower-profile housing suited for ceiling or wall mounting in indoor and sheltered outdoor locations. Both share the same 5MP resolution, full-colour night vision, AI analytics, and smart detection features. Choose the C350 for outdoor perimeter surveillance; choose the C450 for indoor or sheltered installations. Which lens size should I choose? The 2.8mm lens provides the widest field of view — best for covering large areas at close range such as building entrances, car parks, and open outdoor spaces. The 4mm lens offers a balanced view suitable for driveways, general perimeter monitoring, and medium-distance outdoor areas. The 6mm lens provides a narrower, longer-range view — ideal for monitoring specific points such as gates, laneways, and distant areas where more detail at range is needed. All three variants are priced identically. What is People & Vehicle Analytics and how does it help? People & Vehicle Analytics allows you to search recorded footage by specific attributes rather than scrubbing through hours of video. For people, you can filter by hair length and clothing. For vehicles, you can filter by vehicle colour and type. This dramatically reduces the time needed to locate a specific person or vehicle in footage after an incident — a significant advantage for retail loss prevention and commercial security investigations. Does it work without an NVR? Yes. The VIGI C350 has an onboard microSD card slot supporting up to 256GB for local recording, allowing it to operate as a standalone camera without an NVR. It can be managed directly via the VIGI app or VIGI Security Manager. For multi-camera installations with centralised recording and AI analytics, a VIGI NVR is recommended. What NVR is recommended for this camera? The TP-Link VIGI NVR1008H-8P is ideal for small installations — 8 PoE+ ports, Plug & Play auto-detection of VIGI cameras, and 4K HDMI output. For larger installations requiring AI analytics across multiple cameras, the VIGI NVR2016H (16 channels) or NVR2032H (32 channels) are recommended. Ensure your NVR supports AI analytics to take full advantage of the C350's People & Vehicle Analytics.

Read more less

5MP Full-Colour Turret Camera with AI Analytics, Corridor Mode and 24/7 Colour Night Vision The TP-Link VIGI C450 is a 5MP full-colour turret network camera that delivers vivid, colour footage around the clock — including in complete darkness — using a high-sensitivity large-aperture sensor and built-in spotlight LEDs. Beyond standard colour night vision, the C450 adds AI-powered People & Vehicle Analytics for rapid forensic search, Corridor Mode for portrait-orientation monitoring, two-way audio, active defence, and local SD card storage up to 256GB. It's the most feature-rich camera in the VIGI C4x0 turret range — ideal for commercial CCTV installations, retail environments, and high-security residential properties across Australia. Key Features 5MP Super-High Definition: Captures detailed 5MP (2880×1620) footage — sharper than 4MP and significantly clearer than 1080p — for reliable identification of faces, clothing, licence plates, and fine details. 24/7 Full-Colour Night Vision: Built-in spotlight LEDs and a high-sensitivity large-aperture sensor deliver full-colour footage in complete darkness — no black-and-white switching at night, ever. AI People & Vehicle Analytics: Search recorded footage rapidly by filtering people by gender, hair length, and clothing attributes, or vehicles by colour and type — dramatically reducing investigation time after an incident. Human & Vehicle Classification: AI-powered detection distinguishes humans and vehicles from other motion sources (animals, foliage), reducing false alerts and improving notification accuracy. Smart Detection: Configurable smart events including Line Crossing, Area Intrusion, and Camera Tamper Detection — with instant push notifications to the VIGI app. Active Defence: Automatically triggers sound and light alarms when abnormal events are detected — warning and deterring potential intruders in real time without manual intervention. Two-Way Audio: Built-in microphone and speaker allow real-time voice intercom through the camera — useful for deterring intruders or communicating with visitors remotely. Corridor Mode: Rotates the image from 16:9 landscape to 9:16 portrait orientation — ideal for monitoring hallways, stairwells, retail aisles, and other long, narrow spaces. H.265+ Compression: Reduces storage consumption and network bandwidth by up to 50% compared to H.264 without sacrificing image quality — lowering NVR storage and running costs. True WDR, 3D DNR & Smart IR: Advanced video enhancement for challenging lighting conditions including backlit scenes, high-contrast environments, and low-light areas. Local SD Card Storage (up to 256GB): Onboard microSD slot for local recording independent of an NVR — useful for standalone deployments or as a backup recording source. PoE or 12V DC Power: Flexible dual power options — connect via a single PoE Ethernet cable for clean, simple installation, or use a 12V DC power adapter where PoE is unavailable. Flexible Management: Manage via VIGI NVR UI, web browser, VIGI app (iOS & Android), or VIGI Security Manager desktop software — supporting both local and remote monitoring. Common Use Cases Retail stores and shopping centres requiring 24/7 colour footage and rapid incident search via AI analytics Car parks and driveways where vehicle colour and type identification is critical Hallways, stairwells, and retail aisles monitored in portrait orientation via Corridor Mode Commercial properties requiring active deterrence with sound and light alarms High-security residential properties where 5MP colour detail improves identification Standalone deployments with local 256GB SD card recording (no NVR required) Technical Specifications Model VIGI C450 (2.8mm) Resolution 5MP (2880×1620) Lens 2.8mm fixed (also available in 4mm) Camera Type Full-Colour Turret (indoor/outdoor) Night Vision Full-colour 24/7 (spotlight LEDs) AI Analytics People & Vehicle Analytics (gender, hair, clothing, vehicle colour/type) AI Classification Human & Vehicle Smart Detection Line Crossing, Area Intrusion, Camera Tamper Active Defence Yes (sound & light alarm) Two-Way Audio Yes (built-in mic & speaker) Corridor Mode Yes (16:9 to 9:16 portrait rotation) Video Compression H.265+ / H.265 / H.264+ / H.264 Video Enhancement True WDR, 3D DNR, Smart IR Local Storage microSD up to 256GB Power Supply PoE (IEEE 802.3af) or 12V DC Network Interface RJ45 10/100Mbps Management VIGI NVR, Web UI, VIGI App, VIGI Security Manager ONVIF Yes Weight 400g Downloads VIGI C450 Datasheet (PDF) Frequently Asked Questions What is the difference between the VIGI C450 and the VIGI C440? The C450 is the premium model with 5MP resolution (vs 4MP on the C440), AI People & Vehicle Analytics for forensic search by attributes (gender, clothing, vehicle colour/type), and a larger 256GB SD card capacity (vs unspecified on the C440). Both offer 24/7 full-colour night vision, smart detection, active defence, two-way audio, and Corridor Mode. Choose the C450 for commercial installations where post-incident investigation speed and higher resolution are priorities. What is People & Vehicle Analytics and how does it help? People & Vehicle Analytics allows you to search recorded footage by specific attributes rather than scrubbing through hours of video. For people, you can filter by gender, hair length, and clothing colour/type. For vehicles, you can filter by vehicle colour and type. This dramatically reduces the time needed to locate a specific person or vehicle in footage after an incident — a significant advantage for retail loss prevention and commercial security investigations. Does the C450 work without an NVR? Yes. The VIGI C450 has an onboard microSD card slot supporting up to 256GB for local recording, allowing it to operate as a standalone camera without an NVR. It can be managed directly via the VIGI app or VIGI Security Manager. For multi-camera installations with centralised recording, playback, and AI analytics, a VIGI NVR is recommended. What is the difference between the 2.8mm and 4mm lens variants? The 2.8mm lens (this model) provides a wider field of view — ideal for covering large areas at close to medium range such as car parks, open rooms, and building entrances. The 4mm lens provides a slightly narrower, longer-range view better suited for driveways, corridors, and medium-distance monitoring where more detail at distance is needed. Is it suitable for outdoor installation? Yes. The VIGI C450 is rated for outdoor use. For permanent outdoor installation in Australian conditions, mount in a sheltered position where possible to protect the spotlight LEDs and maximise longevity. Check the product's IP rating for specific weatherproofing details. What NVR is recommended for this camera? The TP-Link VIGI NVR1008H-8P is ideal for small installations — 8 PoE+ ports, Plug & Play auto-detection of VIGI cameras, and 4K HDMI output. For larger installations requiring AI analytics across multiple cameras, the VIGI NVR2016H (16 channels) or NVR2032H (32 channels) are recommended. Ensure your NVR supports AI analytics features to take full advantage of the C450's People & Vehicle Analytics.

Read more less

48V Passive PoE Gigabit Adapter for TP-Link Passive PoE Devices The TP-Link TL-POE4818G is a 48V passive PoE Gigabit adapter that simultaneously delivers power and data to compatible passive PoE devices over a single Ethernet cable — eliminating the need for a separate power outlet at the device location. With Gigabit speed support, plug-and-play operation, and a wall-mountable design, it's a clean, simple solution for powering TP-Link passive PoE access points, IP cameras, and other compatible devices in homes and small business installations across Australia. Important: The TL-POE4818G uses passive PoE (48V), which is not compatible with IEEE 802.3af/at standard PoE devices. It is designed specifically for use with TP-Link passive PoE products. Using it with non-compatible devices may cause damage. Key Features 48V Passive PoE: Delivers 48V passive PoE power and Gigabit data over a single Cat5e or above Ethernet cable to compatible TP-Link passive PoE devices. Gigabit Speed Support: Full 10/100/1000Mbps throughput — no speed reduction when powering devices via PoE. Plug & Play: No configuration, software, or management interface required — connect and go. Auto Power Detection: Automatically determines the necessary power requirements of the connected device. Wall-Mountable Design: Includes wall-mounting brackets for clean, permanent installation on a wall or surface — no loose adapter sitting on a desk or floor. Compact Form Factor: Small and unobtrusive — suitable for discreet installation in offices, retail stores, and home environments. Common Use Cases Powering TP-Link passive PoE wireless access points (e.g. EAP series with passive PoE support) where a PoE switch is not available Adding a single passive PoE device to an existing non-PoE network without replacing the switch Clean wall-mounted installation in offices, retail stores, and home environments Powering TP-Link outdoor access points and CPE devices that require 48V passive PoE Technical Specifications Model TL-POE4818G PoE Type Passive PoE (48V) Ethernet Speed 10/100/1000Mbps (Gigabit) Compatibility TP-Link passive PoE devices only Configuration Plug and Play (no setup required) Mounting Wall-mountable (brackets included) Weight 300g Downloads TL-POE4818G Datasheet (PDF) Frequently Asked Questions What is passive PoE and how is it different from standard PoE (802.3af/at)? Standard PoE (IEEE 802.3af/at) uses a negotiation process to detect compatible devices before applying power, making it safe to use with any 802.3af/at-compliant device. Passive PoE applies voltage directly to the Ethernet cable without negotiation — it is simpler and lower cost, but only safe to use with devices specifically designed for passive PoE at the correct voltage. Using a passive PoE adapter with an incompatible device can cause damage. The TL-POE4818G is designed for use with TP-Link passive PoE products only. Which TP-Link devices are compatible with the TL-POE4818G? The TL-POE4818G is recommended for TP-Link passive PoE products including certain EAP access points, CPE outdoor units, and other TP-Link devices that specify 48V passive PoE input. Check your device's specifications to confirm it requires 48V passive PoE before purchasing. Refer to the datasheet for the full compatible device list. Can I use this with a standard 802.3af/at PoE switch? No. The TL-POE4818G is a passive PoE injector — it connects between your non-PoE switch/router and the powered device. It is not designed to be used in conjunction with an active 802.3af/at PoE switch port. Connect the LAN port of the adapter to your switch, and the PoE port to your passive PoE device. Does it reduce network speed? No. The TL-POE4818G supports full Gigabit (10/100/1000Mbps) throughput — there is no speed reduction when powering devices via passive PoE. Can I mount it on a wall? Yes. The TL-POE4818G includes wall-mounting brackets for a clean, permanent installation. This is particularly useful when the adapter is installed near a ceiling-mounted access point or in a location where a loose adapter would be impractical.

Read more less

TP-Link TL-SG105PP-M2 — 5-Port 2.5G Desktop Switch with 4-Port PoE++ The TP-Link TL-SG105PP-M2 delivers multi-gigabit switching performance in a compact, fanless desktop form factor. With four PoE++ ports capable of supplying up to 60W each and a total PoE budget of 123W, it’s purpose-built for powering high-demand devices like PTZ cameras, Wi-Fi 6 access points, video intercoms, and access control systems — all over a single cable. Fully plug-and-play with no configuration required, it’s an ideal choice for installers and IT professionals across Australia looking for a reliable, high-power PoE solution in a compact package. Key Features 5× 2.5G Multi-Gigabit Ports: All five RJ45 ports auto-negotiate at 10/100/1000/2500 Mbps, providing up to 2.5× the bandwidth of standard Gigabit switches for NAS, NVR, and workstation connectivity. 4× PoE++ Ports (IEEE 802.3bt Type 3): Ports 1–4 deliver up to 60W each — sufficient for PTZ cameras, high-power Wi-Fi 6/6E access points, and video intercoms. 123W Total PoE Budget: Generous shared PoE budget across all four ports supports multiple high-wattage devices simultaneously. PoE Auto Recovery: Automatically detects and reboots unresponsive PoE-powered devices, reducing manual intervention on remote or hard-to-reach installations. 802.1p/DSCP QoS: Prioritises latency-sensitive traffic such as VoIP, video surveillance streams, and IP intercoms for consistent performance. Plug and Play: Fully unmanaged — no software, no web interface, no configuration required. Connect and go. Fanless Silent Operation: No moving parts means silent, reliable operation suitable for offices, reception areas, and residential environments. Desktop or Wall Mountable: Flexible installation options for comms cabinets, desktops, or wall-mounted enclosures. Use Cases PTZ & High-Power IP Cameras: Power PTZ cameras and motorised dome cameras drawing up to 60W per port without separate power injectors. Wi-Fi 6 & Wi-Fi 6E Access Points: Deploy high-wattage PoE++ access points that exceed the 30W limit of standard PoE+ switches. Video Intercoms & Access Control: Power door stations, IP intercoms, and electromagnetic locks from a single switch with QoS prioritisation. Small Office & Home Office Networks: Upgrade legacy 1G infrastructure to 2.5G for faster NAS, workstation, and NVR connectivity. Home Lab & AV Setups: High-bandwidth 2.5G switching for media servers, NVRs, and streaming devices in compact environments. Specifications Model TL-SG105PP-M2 Total Ports 5 × RJ45 (10/100/1000/2500 Mbps) PoE Ports 4 × PoE++ (Ports 1–4) PoE Standard IEEE 802.3af / 802.3at / 802.3bt Type 3 Max PoE per Port 60W Total PoE Budget 123W QoS 802.1p / DSCP PoE Auto Recovery Yes Management Unmanaged (Plug and Play) Cooling Fanless (Silent) Mounting Desktop / Wall Mount Weight 1.535 kg Certifications CE, FCC, RoHS Frequently Asked Questions Does the TL-SG105PP-M2 require any software or configuration? No. It’s a fully unmanaged switch — simply plug it in and it works immediately. There is no web interface, app, or driver required. Can I power a PTZ camera that draws more than 30W? Yes. Each PoE++ port supports up to 60W (IEEE 802.3bt Type 3), making it compatible with high-wattage PTZ cameras, pan-tilt units, and Wi-Fi 6 access points that exceed the 30W limit of standard PoE+ switches. What happens if a PoE device stops responding? The PoE Auto Recovery feature automatically detects unresponsive powered devices and reboots them — reducing the need for manual intervention on remote or hard-to-reach installations. Is the total PoE budget shared across all ports? Yes. The 123W total PoE budget is shared across all four PoE++ ports. Individual ports can draw up to 60W when other ports are drawing less, but the combined draw across all ports cannot exceed 123W. What is the difference between PoE, PoE+, and PoE++? PoE (802.3af) delivers up to 15.4W per port. PoE+ (802.3at) delivers up to 30W per port. PoE++ (802.3bt Type 3) delivers up to 60W per port — required for high-power devices like PTZ cameras, Wi-Fi 6E access points, and some video intercoms. The TL-SG105PP-M2 supports all three standards. Is this switch suitable for outdoor camera installations? The switch itself is designed for indoor use. It can power outdoor PoE IP cameras via standard Cat5e/Cat6 cabling run to weatherproof camera housings or outdoor enclosures. Does the 2.5G speed require special cabling? No. The TL-SG105PP-M2 runs at 2.5 Gbps over standard Cat5e or Cat6 cabling — no special cabling upgrade is required for existing structured cabling installations. Downloads 📄 TL-SG105PP-M2 Datasheet (PDF)

Read more less

TP-Link TL-SG1005P-PD 5-Port Gigabit PoE+ Switch with PoE++ In Power Your Surveillance Network Without the Complexity The TP-Link TL-SG1005P-PD is a compact, plug-and-play gigabit PoE+ switch designed for security installers and facilities managers who need reliable power and data delivery to IP cameras and access control devices. Powered entirely via PoE++ (802.3bt), it eliminates the need for a separate power adapter — ideal for tight equipment rooms, wall-mount enclosures, and remote deployments across Australia. Key Features 5 × Gigabit RJ45 Ports — Full 10/100/1000 Mbps auto-negotiation on all ports for high-throughput video streams. 1 × PoE++ Input (802.3bt) — Accepts upstream PoE power from a PoE++ injector or switch; no AC/DC adapter required. 4 × PoE+ Output Ports — Delivers up to 66 W total PoE budget (varies by upstream power standard: 66 W / 47 W / 21 W / 9 W). Long-Range PoE+ (Extend Mode) — Extends PoE transmission up to 250 m at 10 Mbps, perfect for perimeter cameras and large-site deployments. PoE Auto Recovery — Automatically reboots unresponsive powered devices (PDs) to maintain uptime without manual intervention. Fanless, Silent Operation — No moving parts; suitable for offices, retail spaces, and noise-sensitive environments. Metal Casing — Durable construction supports desktop or wall-mount installation. Plug and Play — Zero configuration required; ready to deploy straight out of the box. Use Cases Extending PoE to IP cameras in locations without a nearby power outlet Powering access control readers, intercoms, and VoIP phones from a single upstream PoE++ source Long-range camera runs in warehouses, car parks, and large commercial sites Clean, cable-managed installs inside network enclosures where AC power is unavailable Technical Specifications Specification Detail Model TL-SG1005P-PD Total Ports 5 × 10/100/1000 Mbps RJ45 PoE Input Port Port 1 — 802.3bt Type 4 (PoE++) PoE Output Ports Ports 2–5 — 802.3at (PoE+) / 802.3af (PoE) PoE Budget (802.3bt Type 4 input) Up to 66 W PoE Budget (802.3bt Type 3 input) Up to 47 W PoE Budget (802.3at input) Up to 21 W PoE Budget (802.3af input) Up to 9 W Long-Range Extend Mode Up to 250 m at 10 Mbps Power Supply PoE only (no AC/DC adapter) Casing Metal Mounting Desktop / Wall-mount Cooling Fanless Weight 0.36 kg Barcode (EAN) 4895252501117 Downloads TL-SG1005P-PD Datasheet (PDF) Frequently Asked Questions Does the TL-SG1005P-PD require a separate power adapter? No. This switch is powered exclusively via PoE++ (802.3bt) through Port 1. It does not support AC or DC power input. You will need a compatible PoE++ injector or upstream switch to power it. How much PoE power can it deliver to connected cameras? The total PoE output budget depends on the upstream power source: up to 66 W with an 802.3bt Type 4 input, 47 W with Type 3, 21 W with 802.3at, and 9 W with 802.3af. Budget is shared across all four output ports. What is Extend Mode and when should I use it? Extend Mode reduces port speed to 10 Mbps to push PoE up to 250 m over a single Cat5e/Cat6 cable. Use it when running cameras to distant locations where a standard 100 m run isn't sufficient — common in car parks, warehouses, and large perimeter installations. What happens if a connected camera stops responding? The PoE Auto Recovery feature detects unresponsive powered devices and automatically power-cycles them, restoring operation without requiring a site visit or manual reboot. Can I mount this switch on a wall? Yes. The TL-SG1005P-PD supports both desktop and wall-mount installation. Its metal casing is suited to equipment rooms, server racks, and on-wall enclosures.

Read more less

Compact Gigabit PoE++ Power for Desktops, Workbenches & Small Installations The TP-Link TL-SG1006PP is a plug-and-play 6-port gigabit desktop switch that delivers both data and power over a single Ethernet cable. With one 60W PoE++ port and three 30W PoE+ ports, it's purpose-built for powering high-demand devices like PTZ cameras, wireless access points, and VoIP phones — all from a compact, fanless desktop unit. Ideal for small offices, retail counters, and on-site security installations across Australia. Key Features 1× PoE++ Port (802.3bt) — Up to 60W — Power high-demand devices such as PTZ cameras, multi-radio access points, or thin clients from a single port. 3× PoE+ Ports (802.3at/af) — Up to 30W Each — Power standard IP cameras, VoIP phones, and wireless APs without separate power adaptors. 64W Total PoE Budget — Sufficient for a mixed deployment of PoE and PoE++ devices in a small installation. 6× Gigabit RJ45 Ports — Full gigabit speeds across all ports for fast, low-latency data transfer. Extend Mode (up to 250m) — Extend PoE data and power transmission up to 250 metres at 10 Mbps — useful for cameras positioned far from the switch. PoE Auto Recovery — Automatically detects and reboots unresponsive PoE devices, reducing the need for manual intervention on-site. 802.1p/DSCP QoS — Prioritises latency-sensitive traffic such as video streams and VoIP calls for smoother performance. Plug and Play — No configuration, no software, no login. Connect and go. Desktop Form Factor — Compact and fanless design suits desktops, shelves, and small comms enclosures. Use Cases PTZ Camera Power — The 60W PoE++ port can power demanding PTZ cameras that exceed standard PoE+ limits. Small CCTV Installations — Power up to 3 standard IP cameras and one high-power device from a single compact switch. Small Office Networking — Connect workstations, a VoIP phone, and a wireless AP from one desktop unit without a rack. Retail & Hospitality — Discreet desktop placement behind a counter to power a camera, EFTPOS terminal hub, and AP simultaneously. Remote or Extended Runs — Use Extend Mode to reach cameras or APs up to 250m away without additional hardware. IT Technicians On-Site — Portable plug-and-play switch for temporary deployments, testing, or staged rollouts. Technical Specifications Specification Detail Model TL-SG1006PP Total Ports 6× 10/100/1000 Mbps RJ45 PoE++ Port 1× Port (802.3bt) — up to 60W PoE+ Ports 3× Ports (802.3at/af) — up to 30W each Total PoE Budget 64W PoE Standards IEEE 802.3af / 802.3at / 802.3bt QoS 802.1p / DSCP Extend Mode Range Up to 250m at 10 Mbps PoE Auto Recovery Yes Form Factor Desktop (fanless) Weight 860g Vendor TP-Link Downloads 📄 Download TL-SG1006PP Datasheet (PDF) Frequently Asked Questions What is the difference between PoE, PoE+, and PoE++? PoE (802.3af) delivers up to 15.4W per port, PoE+ (802.3at) delivers up to 30W, and PoE++ (802.3bt) delivers up to 60W or 90W depending on the type. The TL-SG1006PP includes one 60W PoE++ port and three 30W PoE+ ports, making it suitable for both standard and high-power devices. Can I power a PTZ camera from this switch? Yes. PTZ cameras typically require 25–50W depending on the model. The 60W PoE++ port on the TL-SG1006PP can comfortably power most PTZ cameras. Check your camera's power specification before connecting. Does the 64W PoE budget cover all 4 PoE ports simultaneously? The total PoE budget is 64W shared across all PoE ports. If you connect a 60W device to the PoE++ port, the remaining 4W is available for the PoE+ ports. Plan your device power draw accordingly to avoid exceeding the budget. Does this switch require any configuration? No. The TL-SG1006PP is fully unmanaged and plug-and-play. Extend Mode and other hardware features are toggled via physical DIP switches on the unit — no software or login required. What is PoE Auto Recovery and why does it matter? PoE Auto Recovery monitors connected PoE devices and automatically power-cycles any that become unresponsive. This is particularly useful for IP cameras and wireless APs that may occasionally freeze, eliminating the need for a manual site visit to reboot the device. Is this switch suitable for outdoor use? No. The TL-SG1006PP is designed for indoor desktop use. For outdoor or harsh-environment installations, use a weatherproof enclosure or choose a switch rated for outdoor deployment.

Read more less

TP-Link TL-SG1210PP – 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ The TP-Link TL-SG1210PP is a plug-and-play 10-port Gigabit switch that steps up from standard PoE+ with two IEEE 802.3bt PoE++ ports capable of delivering up to 60W each — enough to power high-wattage PTZ cameras, multi-radio access points, and other demanding PoE devices. Combined with six PoE+ ports (30W each), a 123W total budget, Extend Mode for 250-metre cable runs, PoE Auto Recovery, and a Combo SFP/RJ45 uplink port, it’s a versatile switch for professional security and network installations across Australia. Key Features 2 × PoE++ Ports (IEEE 802.3bt): Ports 1–2 deliver up to 60W each for high-power devices such as PTZ cameras, multi-radio APs, and video conferencing equipment. 6 × PoE+ Ports (IEEE 802.3at): Ports 3–8 deliver up to 30W each for standard IP cameras, APs, VoIP phones, and access control devices. 123W Total PoE Budget: Generous shared budget across all eight PoE ports with intelligent power management. 1 × Combo SFP/RJ45 Uplink Port: Flexible uplink via Gigabit SFP fibre transceiver or standard RJ45 Ethernet — whichever suits your installation. Extend Mode — Up to 250m: Transmits data and PoE power up to 250 metres over a single Cat5e/6 cable at 10Mbps, ideal for long cable runs to remote cameras. PoE Auto Recovery: Automatically detects and reboots unresponsive PoE-powered devices (cameras, APs) without manual intervention — critical for unmanned installations. Priority Mode: Ports 1–2 are assigned high priority to guarantee power and bandwidth for the most critical devices in the installation. Isolation Mode: One-click client traffic separation prevents devices on the switch from communicating with each other — useful for multi-tenant security and guest network isolation. 802.1p/DSCP QoS: Prioritises latency-sensitive traffic such as video streams and VoIP for consistent performance. Plug and Play: No configuration, software, or web interface required — connect and power on. Ideal Use Cases Powering high-wattage PTZ cameras (up to 60W) on Ports 1–2 alongside standard IP cameras on the remaining PoE+ ports. Deploying multi-radio Wi-Fi 6 access points requiring PoE++ power alongside standard PoE devices on a single switch. Long cable run installations using Extend Mode to reach cameras or APs up to 250 metres from the switch. Connecting to a core switch or router via the Combo SFP/RJ45 uplink using fibre or copper as required. Multi-tenant or shared environments where Isolation Mode keeps client traffic separated without additional VLANs or managed switches. Unmanned installations where PoE Auto Recovery ensures cameras and APs self-recover without site visits. Technical Specifications Specification Detail Model TL-SG1210PP RJ45 Ports 9 × 10/100/1000Mbps RJ45 Combo Uplink Port 1 × 1000Mbps Combo SFP/RJ45 PoE++ Ports 2 (Ports 1–2) — IEEE 802.3bt, up to 60W each PoE+ Ports 6 (Ports 3–8) — IEEE 802.3at, up to 30W each PoE Standard IEEE 802.3af / 802.3at / 802.3bt Total PoE Budget 123W Extend Mode Range Up to 250m (10Mbps, Cat5e/6) PoE Auto Recovery Yes Priority Mode Ports 1–2 high priority Isolation Mode Yes (one-click client traffic separation) QoS 802.1p / DSCP Configuration Plug and play (no configuration required) Weight 1.6kg SKU TL-SG1210PP Barcode (EAN) 4895252500349 Downloads TL-SG1210PP Datasheet (PDF) Frequently Asked Questions What is the difference between PoE+, PoE++, and standard PoE? Standard PoE (IEEE 802.3af) delivers up to 15.4W per port. PoE+ (IEEE 802.3at) delivers up to 30W. PoE++ (IEEE 802.3bt) delivers up to 60W (Type 3) or 100W (Type 4). The TL-SG1210PP’s Ports 1–2 support PoE++ at up to 60W, making them suitable for high-power devices that standard PoE+ cannot support. Which devices can I power on the PoE++ ports? Any IEEE 802.3af/at/bt compliant device drawing up to 60W — including high-wattage PTZ cameras, multi-radio Wi-Fi 6 access points, video conferencing endpoints, and industrial IoT devices. Always check your device’s PoE power requirement before connecting. What is Extend Mode and when should I use it? Extend Mode allows the switch to transmit data and PoE power up to 250 metres over a single Cat5e or Cat6 cable at 10Mbps. Use it when camera or AP cable runs exceed the standard 100-metre Ethernet limit — common in large properties, warehouses, and outdoor installations. What does PoE Auto Recovery do? PoE Auto Recovery monitors connected PoE devices and automatically reboots any that become unresponsive or go offline, without requiring manual intervention. This is particularly valuable for IP cameras and APs in unmanned or hard-to-access locations. Can I use both the SFP and RJ45 on the Combo uplink port simultaneously? No. The Combo SFP/RJ45 port (Port 10) is a shared port — only one interface (SFP or RJ45) can be active at a time. The SFP connection takes priority when both are connected. What is the difference between the TL-SG1210PP and the TL-SG1210P? The TL-SG1210PP adds two PoE++ ports (up to 60W each, IEEE 802.3bt) on Ports 1–2, plus Extend Mode, PoE Auto Recovery, Priority Mode, and Isolation Mode — features not present on the TL-SG1210P. It also has a higher 123W total PoE budget versus the TL-SG1210P’s 63W. Choose the TL-SG1210PP when you need to power high-wattage devices or require the additional intelligent PoE management features.

Read more less

TP-Link TL-SG116P – 16-Port Gigabit Unmanaged Desktop Switch with 16-Port PoE+ The TP-Link TL-SG116P is a plug-and-play 16-port Gigabit desktop switch with full PoE+ on every port — no uplink-only PoE, no compromises. With a 120W total PoE budget, 30W per port, and intelligent power management built in, it’s purpose-built for IP camera installations, wireless access point deployments, and small business networks where simplicity and reliability matter. PoE Auto Recovery automatically reboots unresponsive devices, reducing the need for manual intervention on site. Key Features 16 × Gigabit PoE+ Ports: Every port delivers both data and power — no dedicated uplink ports consuming PoE budget. Supports IEEE 802.3af/at with up to 30W per port. 120W Total PoE Budget: Sufficient to simultaneously power multiple IP cameras, wireless APs, VoIP phones, and access control readers across all 16 ports with intelligent load management. PoE Auto Recovery: Automatically detects and reboots dropped or unresponsive PoE-powered devices (cameras, APs) without manual intervention — critical for unattended installations. Extend Mode — Up to 250m: Extends data and power transmission range to 250 metres over a single Cat5e/Cat6 cable, well beyond the standard 100m Ethernet limit — ideal for large properties and perimeter camera runs. Priority Mode: Ports 1–4 are assigned high priority to guarantee bandwidth and power for latency-sensitive devices such as NVRs, primary cameras, or VoIP phones. Isolation Mode: One-click client traffic separation prevents devices on the switch from communicating with each other — useful for guest networks, multi-tenant environments, and security-conscious deployments. Intelligent Power Management: When total PoE consumption approaches 120W, the switch automatically reduces power to lower-priority ports to protect higher-priority devices and prevent overload. Plug and Play: No configuration, software, or management interface required — connect and go. Durable Metal Casing: High-quality metal enclosure protects internal components and passes stringent reliability testing for long-term deployment in demanding environments. Ideal Use Cases Powering and connecting up to 16 IP cameras in a CCTV or surveillance installation without separate power supplies. Deploying multiple wireless access points across an office, warehouse, school, or retail environment from a single switch. Small business and SME networks requiring a reliable, zero-configuration Gigabit PoE switch. Dormitory, apartment, or multi-tenancy installations where Isolation Mode keeps client traffic separated. Long-distance camera runs up to 250m using Extend Mode on large properties, farms, or perimeter security systems. VoIP phone deployments where Priority Mode ensures call quality is maintained under load. Technical Specifications Specification Detail Model TL-SG116P Total Ports 16 × 10/100/1000Mbps RJ45 PoE Ports 16 × PoE+ (all ports) PoE Standard IEEE 802.3af / IEEE 802.3at (PoE+) Max PoE Per Port 30W Total PoE Budget 120W Switching Capacity 32Gbps Forwarding Rate 23.8Mpps MAC Address Table 8K Extend Mode Range Up to 250m (data & power, at reduced speed) Special Modes Extend Mode, Priority Mode, Isolation Mode PoE Auto Recovery Yes (automatic PD device reboot) Management Unmanaged (plug and play) Enclosure Metal desktop Fan Fanless Weight 2kg SKU TL-SG116P Barcode (EAN) 4895252500301 Downloads TL-SG116P Datasheet (PDF) Frequently Asked Questions Does every port on the TL-SG116P support PoE+? Yes. All 16 ports are PoE+ capable, each delivering up to 30W. There are no dedicated uplink ports that consume PoE budget without powering devices. How many IP cameras can the TL-SG116P power simultaneously? With a 120W total PoE budget, the number of cameras depends on each camera’s power draw. For example, 16 cameras drawing 7.5W each would consume exactly 120W. Most standard IP cameras draw between 5W and 15W, so real-world capacity is typically 8–16 cameras depending on the models used. What is Extend Mode and when should I use it? Extend Mode increases the maximum cable run from the standard 100m Ethernet limit to 250 metres by reducing the link speed to 10Mbps. It’s ideal for perimeter cameras, gate cameras, or any device located far from the switch on a large property. Enable it via the hardware DIP switch on the unit. What does PoE Auto Recovery do? PoE Auto Recovery periodically checks the status of connected PoE devices. If a device (such as an IP camera or wireless AP) stops responding, the switch automatically cuts and restores power to reboot it — similar to unplugging and replugging the device — without any manual intervention required. Can I use the TL-SG116P with non-PoE devices? Yes. The switch automatically detects whether a connected device is PoE-capable. Non-PoE devices (such as computers or NVRs) connect normally via Ethernet without receiving any power — there is no risk of damage to non-PoE equipment. Is the TL-SG116P managed or unmanaged? The TL-SG116P is an unmanaged switch — it requires no software, web interface, or configuration to operate. Mode settings (Extend, Priority, Isolation) are configured via physical DIP switches on the unit. If you require VLAN, QoS, or remote management, consider TP-Link’s managed PoE switch range. Is it fanless? Yes. The TL-SG116P operates silently without a cooling fan, making it suitable for quiet environments such as offices, reception areas, and meeting rooms.

Read more less

TP-Link TL-SG2016P — 16-Port Gigabit Smart Switch with 8-Port PoE+ The TP-Link TL-SG2016P JetStream is a compact, cost-effective smart switch designed for small to medium-sized businesses and surveillance deployments. With 8 PoE+ ports delivering up to 120W total, full Gigabit speeds across all 16 ports, and seamless integration into the Omada SDN platform, it simplifies network deployment and management without the complexity of a full L3 managed switch. Key Features 8× PoE+ Ports (802.3at/af): Power IP cameras, wireless access points, VoIP phones, and other PoE devices — up to 30W per port with a combined budget of 120W. Full Gigabit Connectivity: 8× Gigabit PoE+ ports and 8× Gigabit non-PoE ports provide high-speed wired connections for all devices. Omada SDN Integration: Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring via the Omada Controller or cloud portal. Omada App Support: Configure settings, monitor network status, and manage clients from your smartphone or tablet — iOS and Android compatible. Advanced Security: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication. QoS Optimisation: L2/L3/L4 QoS and IGMP Snooping prioritise voice and video traffic for smooth, uninterrupted performance. Simplified Cabling: Single Ethernet cable carries both data and power to PoE devices — reducing infrastructure costs and installation complexity. Use Cases IP CCTV & Surveillance: Power and connect up to 8 IP cameras from a single switch — no separate power injectors or additional cabling required. Small Business Networks: Provide reliable Gigabit connectivity for PCs, printers, IPTV, and PoE devices across a single floor or office. Wireless Access Point Deployment: Power and manage multiple Omada EAPs from one switch for seamless Wi-Fi coverage. VoIP & Unified Communications: QoS prioritisation ensures clear, reliable voice calls across your IP phone system. Retail & Hospitality: Compact 1U form factor fits neatly in small comms rooms or wall-mount enclosures for discreet deployment. Technical Specifications Category Specification Total Ports 16× Gigabit RJ45 PoE+ Ports 8× (IEEE 802.3at/af) Non-PoE Ports 8× Gigabit RJ45 PoE Budget 120W total, up to 30W per port Switching Capacity 32 Gbps Forwarding Rate 23.8 Mpps QoS L2/L3/L4, 802.1p CoS/DSCP Security ACL, 802.1X, DHCP Snooping, DoS Defence, Storm Control Management Omada App, Web GUI, Omada SDN Controller Weight 1.98 kg SKU / Part Number TL-SG2016P Barcode (EAN) 4897098689493 Downloads 📄 Download TL-SG2016P Datasheet (PDF) Frequently Asked Questions How many IP cameras can the TL-SG2016P power? Up to 8 IP cameras simultaneously via its PoE+ ports. With a 120W total budget and up to 30W per port, it comfortably supports standard IP cameras drawing 10–15W each. For larger camera counts, consider the TL-SG3452P with 48 PoE+ ports. What is the difference between a Smart Switch and a fully Managed Switch? A Smart Switch (like the TL-SG2016P) offers essential management features — VLANs, QoS, IGMP Snooping, and security — via a web GUI or Omada app, making it ideal for SMBs. A fully Managed Switch adds advanced features like static routing, CLI access, SNMP, and RMON for larger enterprise environments. Does this switch require the Omada Controller to operate? No. The TL-SG2016P can be managed in standalone mode via its web interface. The Omada Controller (hardware, software, or cloud-based) is optional and recommended for multi-device or multi-site deployments requiring centralised management. Is the TL-SG2016P compatible with non-TP-Link PoE devices? Yes. All PoE+ ports comply with IEEE 802.3at/af standards, ensuring compatibility with any standards-compliant PoE device — including IP cameras, access points, and VoIP phones from third-party manufacturers. Can I use this switch with Omada EAPs (wireless access points)? Yes. The TL-SG2016P is fully compatible with Omada EAPs and can power and manage them directly. When used with an Omada Controller, you gain centralised visibility and control over your entire wireless and wired network. What warranty applies in Australia? TP-Link products sold in Australia are covered by a standard manufacturer's warranty. Please contact us or refer to the product documentation for current warranty terms applicable to your purchase.

Read more less

8-Port 2.5G L2+ Managed Switch with 2×10G SFP+ Uplinks and Omada SDN The TP-Link Omada SG3210X-M2 delivers enterprise-grade 2.5G switching in a compact, rack-mountable 1U form factor. With eight 2.5GBASE-T ports and two 10G SFP+ uplinks, it's purpose-built for high-density Wi-Fi 6/6E access point aggregation, SMB server and NAS connectivity, and campus edge networks — all managed centrally through the Omada SDN platform with Zero-Touch Provisioning and free cloud management across Australia. Key Features 8× 2.5GBASE-T Ports: Full 2.5Gbps per port with backward compatibility for 1Gbps and 100Mbps devices — migrate to 2.5G incrementally without replacing existing infrastructure. 2× 10G SFP+ Uplink Slots: High-bandwidth 10G fibre or DAC uplinks to core switches for fast, low-latency backbone aggregation. 40 Gbps Non-Blocking Switching Capacity: Handles simultaneous full-speed traffic across all ports without bottlenecks. Omada SDN Integration: Centrally manage alongside Omada routers and access points via cloud or local controller — with Zero-Touch Provisioning (ZTP) for rapid remote deployment across multiple sites. L2+ Static Routing: Routes inter-VLAN traffic without a dedicated router, improving efficiency in segmented networks. L2/L3/L4 QoS with 8 Priority Queues: Advanced traffic prioritisation with Voice VLAN support — ensures smooth Wi-Fi 6 AP traffic, VoIP calls, and video streams under heavy load. IGMP Snooping: Optimises multicast traffic for IP camera streams and IPTV, reducing unnecessary bandwidth consumption. Enterprise Security Suite: IP-MAC-Port Binding, ACL (L2–L4), Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, RADIUS/TACACS+ Authentication. ISP-Grade Features: 802.3ah OAM, DDM (Digital Diagnostic Monitoring), sFlow, QinQ, L2PT, PPPoE ID Insertion, and IGMP Authentication for carrier and ISP deployments. IPv6 Ready: Dual IPv4/IPv6 Stack, MLD Snooping, DHCPv6 Snooping, and IPv6 ACL for next-generation network readiness. Enterprise Management: Web GUI, CLI (Console, Telnet, SSH), SNMP v1/v2c/v3, RMON, Dual Image, and Dual Configuration for maximum uptime and flexibility. Link Aggregation (LACP): 802.3ad LACP for bonding multiple ports into high-bandwidth uplinks with redundancy. 3-Year Warranty: Backed by TP-Link Australia's 3-year warranty for peace of mind in professional deployments. Common Use Cases Wi-Fi 6/6E access point aggregation — eliminating 1G bottlenecks when backhauling high-throughput APs in offices, schools, and hospitality venues SMB server and NAS connectivity with 2.5G links for faster local file transfers and backups Campus edge and ISP distribution leveraging OAM, QinQ, and sFlow for carrier-grade deployments Secure enterprise LAN with granular ACL, 802.1X, and RADIUS/TACACS+ access control Unified Omada networks — paired with Omada APs and gateways for a fully converged, cloud-managed wired and wireless network Technical Specifications Model SG3210X-M2 RJ45 Ports 8× 2.5GBASE-T (100M/1G/2.5G) SFP+ Uplinks 2× 10G SFP+ Switching Capacity 40 Gbps Packet Forwarding Rate 29.76 Mpps MAC Address Table 16K Jumbo Frame 9216 Bytes QoS L2–L4, 8 queues per port, Voice VLAN IGMP Snooping Yes VLAN 802.1Q, Voice VLAN, Private VLAN, QinQ Static Routing Yes (L2+ inter-VLAN routing) Security ACL L2–L4, 802.1X, IP-MAC-Port Binding, DHCP Snooping, Storm Control, DoS Defence SDN Management Omada SDN (cloud & local controller) Zero-Touch Provisioning Yes (ZTP via Omada) Standalone Management Web GUI, CLI (Console/Telnet/SSH), SNMP v1/v2c/v3, RMON, Dual Image & Dual Config Spanning Tree STP, RSTP, MSTP Link Aggregation Yes (802.3ad LACP) ISP Features 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion IPv6 Dual Stack, MLD Snooping, DHCPv6 Snooping, IPv6 ACL Mounting Rack mountable (19″, 1U) Weight 2.3kg Warranty 3 Years (TP-Link Australia) Downloads SG3210X-M2 Datasheet (PDF) Frequently Asked Questions Is the SG3210X-M2 compatible with non-Omada networks? Yes. It can be managed standalone via web GUI or CLI without the Omada controller. Omada SDN integration is optional but recommended for multi-site deployments requiring centralised management and Zero-Touch Provisioning. Can I use standard 1G devices on the 2.5G ports? Yes. All eight RJ45 ports are backward compatible with 1Gbps and 100Mbps devices — they auto-negotiate to the highest speed supported by the connected device. This allows you to migrate to 2.5G incrementally as you upgrade devices. What SFP+ modules are supported in the uplink ports? The two 10G SFP+ ports support TP-Link-compatible 10G SR/LR transceivers (e.g. TL-SM5110-SR, TL-SM5110-LR) and 10G DAC cables (e.g. TL-SM5220-1M). Check the TP-Link compatibility list for third-party module support. Does it support PoE? No. The SG3210X-M2 does not include PoE. For deployments requiring PoE-powered access points or IP cameras, consider pairing it with a TP-Link Omada PoE switch (e.g. TL-SG3428XMP or TL-SG3428XPP-M2) as an access layer switch, with the SG3210X-M2 as the aggregation/distribution layer. Is Omada cloud management free? Yes. Omada cloud management is available at no additional cost via the Omada app or web portal with a free TP-Link account. There is no ongoing subscription fee for standard cloud management features. What is the difference between the SG3210X-M2 and the TL-SG3428XPP-M2? The SG3210X-M2 has 8× 2.5G non-PoE ports and 2× 10G SFP+ uplinks — ideal as a compact aggregation or distribution switch. The TL-SG3428XPP-M2 has 24× 2.5G ports with 16× PoE+ and 8× PoE++ (up to 90W), plus 4× 10G SFP+ uplinks — designed as a high-density access layer switch for powering and connecting many devices simultaneously. Choose the SG3210X-M2 for aggregation or small deployments; choose the TL-SG3428XPP-M2 for large PoE access layer deployments.

Read more less

High-Density 2.5G PoE+ Switching with 10G Uplinks and Full Cloud Management The TP-Link Omada SG3218XP-M2 is a rack-mountable L2+ managed switch designed for enterprise, campus, and ISP networks that demand high-throughput connectivity and centralised control. With 16 × 2.5G PoE+ ports, 8 of which deliver PoE+ power, and 2 × 10G SFP+ uplink ports, it provides the bandwidth and power headroom needed for modern Wi-Fi 6/6E access points, IP cameras, VoIP systems, and high-speed workstations — all managed through the Omada SDN platform from a single cloud interface. Key Features 16× 2.5G RJ45 Ports — Full 2.5 Gbps per port for high-throughput connections to Wi-Fi 6/6E APs, NVRs, workstations, and other 2.5G-capable devices 8× PoE+ Ports (802.3at) — Powers PoE+ devices including access points, IP cameras, and VoIP phones directly over Ethernet; total PoE budget supports mixed deployments 2× 10G SFP+ Uplink Ports — High-speed fibre or DAC uplinks to core switches or routers, with backward compatibility for Gigabit SFP modules Omada SDN Cloud Management — 100% centralised cloud management of switches, access points, and gateways from a single interface, accessible from anywhere via the Omada app or web portal L2+ Static Routing — Enables inter-VLAN routing within the switch for efficient network segmentation without a dedicated router Advanced QoS (L2–L4) — Prioritises voice, video, and critical data traffic by IP/MAC address, TCP/UDP port, or VLAN to ensure smooth, jitter-free performance Comprehensive Security — IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS protection, and 802.1X authentication with RADIUS/TACACS+ support Full L2 Feature Set — 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, LACP Link Aggregation, IGMP Snooping, Loopback Detection, and Cable Diagnostics ISP-Grade Features — 802.3ah OAM, DDM (Digital Diagnostic Monitoring), sFlow, QinQ, L2PT, PPPoE ID Insertion, and IGMP Authentication for service provider deployments IPv6 Ready — Dual IPv4/IPv6 stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery for next-generation network readiness Multi-User Management — Role-based access control with multi-level permissions for flexible network operation across teams Enterprise Management Interfaces — Web GUI, CLI, SNMP v1/v2c/v3, RMON, Dual Image, and Dual Configuration for maximum uptime and flexibility Typical Use Cases Enterprise LAN distribution or access layer with high-density Wi-Fi 6/6E AP deployments requiring 2.5G PoE+ connectivity Commercial CCTV and IP surveillance installations with multiple PoE-powered cameras and a central NVR Education and campus networks requiring centralised Omada SDN management across multiple sites Hospitality venues (hotels, resorts) deploying high-density wireless with centralised guest network control ISP aggregation and edge deployments leveraging QinQ, OAM, sFlow, and PPPoE ID Insertion SME and mid-market offices upgrading from Gigabit to 2.5G for faster wired workstation and NAS connectivity Technical Specifications Specification Detail Model SG3218XP-M2 RJ45 Ports 16× 2.5G (100M/1G/2.5G auto-negotiation) PoE Ports 8× PoE+ (IEEE 802.3at), ports 1–8 SFP+ Uplink Ports 2× 10G SFP+ (compatible with 1G SFP modules) Switch Type L2+ Managed Management Omada SDN (cloud & on-premises), Web GUI, CLI, SNMP v1/v2c/v3, RMON L2 Features 802.1Q VLAN, STP/RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, Loopback Detection, Cable Diagnostics L2+ Features Static Routing (inter-VLAN) QoS L2–L4 QoS, Voice VLAN, traffic prioritisation by IP/MAC/TCP/UDP/VLAN Security IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS Protection, 802.1X (RADIUS/TACACS+) ISP Features 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Authentication IPv6 Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Reliability Dual Image, Dual Configuration Form Factor Rack-mountable (1U) Weight 3.19 kg Barcode (EAN) 4897098689721 SKU SG3218XP-M2 Downloads SG3218XP-M2 Datasheet (PDF) Frequently Asked Questions What is the total PoE power budget? The SG3218XP-M2 provides PoE+ (802.3at) on ports 1–8. For the exact total PoE power budget, refer to the datasheet linked above or the TP-Link product page, as the budget determines how many high-wattage devices (such as PTZ cameras or Wi-Fi 6 APs) can be powered simultaneously. Can I manage this switch without the Omada cloud? Yes. The SG3218XP-M2 supports standalone web GUI management, CLI, and SNMP without requiring cloud connectivity. Omada SDN cloud management is optional and adds centralised multi-site control via the Omada app or web portal. Does it support inter-VLAN routing? Yes. The L2+ static routing feature enables inter-VLAN routing directly on the switch, allowing traffic to pass between VLANs without a dedicated router — useful for segmenting IoT, camera, and corporate traffic on the same physical infrastructure. Are the 10G SFP+ ports compatible with standard 1G SFP modules? Yes. The SFP+ uplink ports are backward compatible with standard 1G SFP modules, giving you flexibility to use existing fibre infrastructure while leaving room to upgrade to 10G when required. Is this switch suitable for CCTV and IP surveillance deployments? Yes. The combination of PoE+ ports, IGMP Snooping for multicast video streams, QoS prioritisation, and Omada centralised management makes the SG3218XP-M2 well-suited for commercial IP surveillance installations with multiple cameras and an NVR. What is DDM (Digital Diagnostic Monitoring)? DDM allows you to monitor the real-time status of SFP/SFP+ modules inserted into the switch, including temperature, voltage, bias current, and TX/RX power levels. You can also configure alarm and warning thresholds to receive alerts before a module fails.

Read more less