Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input.The Switch Flex Mini (USW Flex Mini) is a fully managed, Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input. The USW Flex Mini can be powered with either PoE (via Port 1) or its included USB-C power adapter*. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) GbE, 802.3af PoE RJ45 input (4) GbE RJ45 ports Compact, slim housing Can be powered with a 5V, 1A USB-C adapter (Only Comes In Single Pack) Downloads Datasheet Installation Guide

Read more less

TP-Link TL-SG116P – 16-Port Gigabit Unmanaged Desktop Switch with 16-Port PoE+ The TP-Link TL-SG116P is a plug-and-play 16-port Gigabit desktop switch with full PoE+ on every port — no uplink-only PoE, no compromises. With a 120W total PoE budget, 30W per port, and intelligent power management built in, it’s purpose-built for IP camera installations, wireless access point deployments, and small business networks where simplicity and reliability matter. PoE Auto Recovery automatically reboots unresponsive devices, reducing the need for manual intervention on site. Key Features 16 × Gigabit PoE+ Ports: Every port delivers both data and power — no dedicated uplink ports consuming PoE budget. Supports IEEE 802.3af/at with up to 30W per port. 120W Total PoE Budget: Sufficient to simultaneously power multiple IP cameras, wireless APs, VoIP phones, and access control readers across all 16 ports with intelligent load management. PoE Auto Recovery: Automatically detects and reboots dropped or unresponsive PoE-powered devices (cameras, APs) without manual intervention — critical for unattended installations. Extend Mode — Up to 250m: Extends data and power transmission range to 250 metres over a single Cat5e/Cat6 cable, well beyond the standard 100m Ethernet limit — ideal for large properties and perimeter camera runs. Priority Mode: Ports 1–4 are assigned high priority to guarantee bandwidth and power for latency-sensitive devices such as NVRs, primary cameras, or VoIP phones. Isolation Mode: One-click client traffic separation prevents devices on the switch from communicating with each other — useful for guest networks, multi-tenant environments, and security-conscious deployments. Intelligent Power Management: When total PoE consumption approaches 120W, the switch automatically reduces power to lower-priority ports to protect higher-priority devices and prevent overload. Plug and Play: No configuration, software, or management interface required — connect and go. Durable Metal Casing: High-quality metal enclosure protects internal components and passes stringent reliability testing for long-term deployment in demanding environments. Ideal Use Cases Powering and connecting up to 16 IP cameras in a CCTV or surveillance installation without separate power supplies. Deploying multiple wireless access points across an office, warehouse, school, or retail environment from a single switch. Small business and SME networks requiring a reliable, zero-configuration Gigabit PoE switch. Dormitory, apartment, or multi-tenancy installations where Isolation Mode keeps client traffic separated. Long-distance camera runs up to 250m using Extend Mode on large properties, farms, or perimeter security systems. VoIP phone deployments where Priority Mode ensures call quality is maintained under load. Technical Specifications Specification Detail Model TL-SG116P Total Ports 16 × 10/100/1000Mbps RJ45 PoE Ports 16 × PoE+ (all ports) PoE Standard IEEE 802.3af / IEEE 802.3at (PoE+) Max PoE Per Port 30W Total PoE Budget 120W Switching Capacity 32Gbps Forwarding Rate 23.8Mpps MAC Address Table 8K Extend Mode Range Up to 250m (data & power, at reduced speed) Special Modes Extend Mode, Priority Mode, Isolation Mode PoE Auto Recovery Yes (automatic PD device reboot) Management Unmanaged (plug and play) Enclosure Metal desktop Fan Fanless Weight 2kg SKU TL-SG116P Barcode (EAN) 4895252500301 Downloads TL-SG116P Datasheet (PDF) Frequently Asked Questions Does every port on the TL-SG116P support PoE+? Yes. All 16 ports are PoE+ capable, each delivering up to 30W. There are no dedicated uplink ports that consume PoE budget without powering devices. How many IP cameras can the TL-SG116P power simultaneously? With a 120W total PoE budget, the number of cameras depends on each camera’s power draw. For example, 16 cameras drawing 7.5W each would consume exactly 120W. Most standard IP cameras draw between 5W and 15W, so real-world capacity is typically 8–16 cameras depending on the models used. What is Extend Mode and when should I use it? Extend Mode increases the maximum cable run from the standard 100m Ethernet limit to 250 metres by reducing the link speed to 10Mbps. It’s ideal for perimeter cameras, gate cameras, or any device located far from the switch on a large property. Enable it via the hardware DIP switch on the unit. What does PoE Auto Recovery do? PoE Auto Recovery periodically checks the status of connected PoE devices. If a device (such as an IP camera or wireless AP) stops responding, the switch automatically cuts and restores power to reboot it — similar to unplugging and replugging the device — without any manual intervention required. Can I use the TL-SG116P with non-PoE devices? Yes. The switch automatically detects whether a connected device is PoE-capable. Non-PoE devices (such as computers or NVRs) connect normally via Ethernet without receiving any power — there is no risk of damage to non-PoE equipment. Is the TL-SG116P managed or unmanaged? The TL-SG116P is an unmanaged switch — it requires no software, web interface, or configuration to operate. Mode settings (Extend, Priority, Isolation) are configured via physical DIP switches on the unit. If you require VLAN, QoS, or remote management, consider TP-Link’s managed PoE switch range. Is it fanless? Yes. The TL-SG116P operates silently without a cooling fan, making it suitable for quiet environments such as offices, reception areas, and meeting rooms.

Read more less

TP-Link TL-SG1210P – 10-Port Gigabit Desktop Switch with 8-Port PoE+ and SFP Slot The TP-Link TL-SG1210P is a fanless 10-port Gigabit switch with PoE+ on eight ports, a dedicated Gigabit SFP fibre slot, and a 63W total PoE budget — all in a compact desktop form factor. Designed for small to medium IP camera installations, wireless AP deployments, and mixed wired/wireless office networks, it delivers data and power over a single cable to up to eight devices with no configuration required. The SFP slot adds flexibility for fibre uplinks to a core switch or NVR over longer distances. Key Features 8 × PoE+ Ports (Ports 1–8): IEEE 802.3af/at compliant, delivering up to 30W per port for IP cameras, wireless APs, VoIP phones, and access control devices. 63W Total PoE Budget: Sufficient to simultaneously power multiple cameras and APs from a single switch. 1 × Gigabit SFP Slot: Supports single-mode and multi-mode fibre transceivers for long-distance uplinks to a core switch, NVR, or fibre backbone — without running copper cable. 9 × Gigabit RJ45 Ports + 1 SFP: 10 total ports with full 10/100/1000Mbps Auto-Negotiation and Auto MDI/MDIX on all copper ports. Fanless Silent Operation: No moving parts — completely silent, suitable for offices, reception areas, and noise-sensitive environments. Plug and Play: No configuration, software, or web interface required — connect and power on. 802.1p/DSCP QoS: Prioritises latency-sensitive traffic such as VoIP and IP camera streams for consistent performance. IGMP Snooping: Optimises multicast traffic from IP cameras, reducing unnecessary bandwidth consumption across the network. Physical Security Lock: Kensington-style lock slot for securing the switch in accessible locations. 20Gbps Switching Capacity: Non-blocking architecture ensures full-speed performance across all ports simultaneously. Ideal Use Cases Powering and connecting up to 8 IP cameras in a CCTV installation without separate PoE injectors or power supplies. Deploying multiple wireless access points across an office, retail space, or warehouse from a single switch. Mixed installations combining IP cameras, APs, VoIP phones, and wired computers on a single compact switch. Using the SFP slot for a fibre uplink to a core switch or NVR located beyond the 100-metre copper cable limit. Small business networks requiring a silent, desktop-sized PoE switch with fibre uplink capability. Replacing multiple PoE injectors with a single managed-free switch for cleaner, more cost-effective installations. Technical Specifications Specification Detail Model TL-SG1210P RJ45 Ports 9 × 10/100/1000Mbps (8 PoE+, 1 standard) SFP Slot 1 × Gigabit SFP (MMF & SMF) PoE Ports Ports 1–8 (IEEE 802.3af/at) PoE Power per Port Up to 30W Total PoE Budget 63W Switching Capacity 20Gbps MAC Address Table 4K QoS 802.1p / DSCP IGMP Snooping Yes Transfer Method Store-and-Forward Fan Fanless (silent) Physical Security Security lock slot Power Supply External adapter (53.5VDC / 1.31A) Power Consumption (no PD) 7.11W @ 220V/50Hz Power Consumption (max PoE) 78.13W @ 220V/50Hz Operating Temperature 0°C – 40°C Dimensions 209 × 126 × 26 mm Weight 1.26kg Certifications CE, FCC, RoHS SKU TL-SG1210P Barcode (EAN) 1210002617062 What’s in the Box 1 × TL-SG1210P 10-Port Gigabit PoE+ Switch 1 × Power Adapter Installation Guide Frequently Asked Questions Which ports support PoE on the TL-SG1210P? Ports 1 through 8 are PoE+ capable (IEEE 802.3af/at). Port 9 is a standard Gigabit RJ45 uplink port, and Port 10 is the Gigabit SFP slot — neither supports PoE. What is the total PoE power budget? The TL-SG1210P has a 63W total PoE budget shared across all eight PoE ports. Each port can deliver up to 30W individually, but the combined draw across all eight ports cannot exceed 63W. How many IP cameras can I power simultaneously? Up to eight cameras. The actual number depends on each camera’s PoE power draw. For example, eight cameras drawing 7W each totals 56W — within the 63W budget. Higher-wattage cameras (e.g. PTZ cameras at 25–30W) will reduce the number that can be powered concurrently. What SFP transceivers are compatible with the SFP slot? The SFP slot supports standard Gigabit SFP transceivers for both multi-mode fibre (MMF, e.g. 1000BASE-SX) and single-mode fibre (SMF, e.g. 1000BASE-LX). TP-Link-branded SFP modules are recommended for guaranteed compatibility. SFP transceivers are sold separately. Does it require any configuration? No. The TL-SG1210P is fully plug and play. Connect your devices and power on — no web interface, software, or CLI configuration is required. What is the difference between the TL-SG1210P and the TL-SG1005LP? The TL-SG1210P has 10 ports (8 PoE+) with a 63W budget and a Gigabit SFP slot for fibre uplinks. The TL-SG1005LP has 5 ports (4 PoE+) with a 40W budget and no SFP slot. Choose the TL-SG1210P for larger installations requiring more PoE ports, higher budget, or fibre connectivity. What is the difference between the TL-SG1210P and the TL-SG116P? The TL-SG116P has 16 PoE+ ports with a 120W budget and is designed for larger deployments. The TL-SG1210P has 8 PoE+ ports with a 63W budget plus a Gigabit SFP slot, making it better suited for medium-sized installations that also need a fibre uplink option.

Read more less

TP-Link TL-SG105PE 5-Port Gigabit PoE+ Easy Smart Switch Reliable PoE+ Switching for IP Cameras, VoIP & Smart Devices The TP-Link TL-SG105PE is a compact, fanless 5-port Gigabit smart switch with 4 PoE+ ports and a 65 W total power budget. It delivers both data and power over a single Ethernet cable — making it an ideal choice for IP security cameras, wireless access points, and VoIP phones in homes, small offices, and commercial installations across Australia. Extend Mode pushes PoE reach up to 250 m for remote camera positions, and PoE Auto Recovery automatically restarts unresponsive powered devices without manual intervention. Key Features 4 × 802.3af/at PoE+ ports — up to 30 W per port, 65 W total PoE budget 5 × 10/100/1000 Mbps Gigabit RJ45 ports with Auto-Negotiation and Auto MDI/MDIX Fanless, silent operation — suitable for noise-sensitive environments PoE Auto Recovery — automatically restarts unresponsive PoE devices Extend Mode — supports PoE transmission up to 250 m at 10 Mbps VLAN support — up to 32 active VLANs (MTU, Port, and Tag-based) QoS with Port-Based, 802.1p, and DSCP priority — 4 priority queues IGMP Snooping V1/V2/V3, Port Mirroring, Loop Prevention, Cable Diagnostics Web-based GUI and Easy Smart Configuration Utility for simple setup 10 Gbps switching capacity, 7.44 Mpps forwarding rate Use Cases IP CCTV Systems: Power and connect up to 4 PoE IP cameras without separate power supplies — ideal for small surveillance installations. Wireless Access Points: Deploy PoE-powered APs throughout a small office or retail space without additional power cabling. VoIP Phones: Prioritise voice traffic with QoS to ensure call quality on small business phone systems. Long-Run Installations: Use Extend Mode to push PoE up to 250 m for remote camera positions where cable runs are long. Small Office Networks: Segment traffic with VLANs and monitor network health with port mirroring and cable diagnostics. Specifications Specification Detail Model TL-SG105PE Total Ports 5 × 10/100/1000 Mbps RJ45 PoE Ports Ports 1–4 (802.3af/at PoE+) PoE Power Per Port Up to 30 W Total PoE Budget 65 W Switching Capacity 10 Gbps Forwarding Rate 7.44 Mpps MAC Address Table 2K Packet Buffer 1.5 Mb Jumbo Frame 16 KB VLAN Up to 32 active VLANs (4K VLAN IDs) QoS Port-Based / 802.1p / DSCP, 4 queues Extend Mode Up to 250 m at 10 Mbps Power Supply External adapter — 53.5 V DC / 1.31 A Max Power Consumption 4.52 W (no PD) / 75.16 W (full PoE load) Cooling Fanless Standards IEEE 802.3i/u/ab/af/at/x, 802.1q, 802.1p Weight 0.76 kg Frequently Asked Questions How many PoE cameras can I connect to the TL-SG105PE? You can connect up to 4 PoE-powered devices (ports 1–4). The total PoE budget is 65 W — if each camera draws 15 W, all 4 ports can run simultaneously at full load. Higher-draw devices (e.g., PTZ cameras at 25–30 W) will reduce the number of simultaneous powered ports. Does this switch require any configuration out of the box? No. It works plug-and-play for basic switching and PoE. The web GUI and Easy Smart Configuration Utility are available for advanced features like VLANs, QoS, and port mirroring when needed. Is the TL-SG105PE compatible with non-TP-Link PoE cameras? Yes. It complies with the IEEE 802.3af/at standard, so it is compatible with any standards-compliant PoE or PoE+ device regardless of brand. What is Extend Mode and when should I use it? Extend Mode reduces port speed to 10 Mbps to extend PoE transmission range up to 250 m. It is useful for remote camera positions where the cable run exceeds the standard 100 m Ethernet limit. What is PoE Auto Recovery? PoE Auto Recovery periodically checks the status of connected PoE devices. If a device becomes unresponsive (e.g., a frozen IP camera), the switch automatically power-cycles that port to restart the device — without any manual intervention. Does the switch have a fan? No. The TL-SG105PE is completely fanless, making it silent and suitable for offices, reception areas, server cabinets, or any noise-sensitive environment.

Read more less

The Ubiquiti UniFi Switch Pro 24 PoE is a powerful managed PoE+ switch offering 24 Gigabit Ethernet PoE+ portswith robust power budget, dual 10G SFP+ uplinks, and deep UniFi Network integration — ideal for enterprise and commercial LAN deployments. Professional Managed PoE+ Switching The UniFi Switch Pro 24 PoE delivers high performance, flexible PoE power distribution, and advanced network management for enterprise networks, surveillance systems, VoIP telephony, access control, and more. With 24× Gigabit PoE+ ports, this switch supports PoE standards including 802.3af/at/bt, enabling power delivery to cameras, access points, phones, and IoT devices without extra power injectors. High-Capacity PoE Power Budget Engineered for demanding networks, the UniFi Switch Pro 24 PoE offers a high total PoE power budget to support both legacy 802.3af devices and high-power PoE+ equipment simultaneously. Dual 10G SFP+ uplinks ensure robust connectivity to core networks or downstream aggregation. Advanced UniFi Network Management Seamlessly managed through the UniFi Network Controller, this switch provides features such as: VLAN segmentation PoE scheduling Port statistics & health 10G uplink redundancy LACP link aggregation This flexibility makes it ideal for smart buildings, enterprise campuses, and multi-service edge LAN deployments. Key Features & Benefits 24 × Gigabit PoE+ ports (802.3af/at/bt compatible) Dual 10G SFP+ uplinks for high-speed aggregation High total PoE power budget 400W Total PoE Power Supply Managed with UniFi Network app & controller Advanced VLAN, QoS, LACP support Rack-mountable metal chassis Ideal for CCTV, Wi-Fi, VoIP & IoT deployments NDAA-compliant options available What’s in the Box UniFi Switch Pro 24 PoE Rackmount brackets + screws Power cord Quick start guide Technical Specifications Specification Details Model UniFi Switch Pro 24 PoE Ports 24× Gigabit Ethernet PoE+ Uplink Ports 2× 10G SFP+ PoE Standards 802.3af / 802.3at / 802.3bt compatible Total PoE Supply 400W Managed UniFi Network Controller Layer L2 / Basic L3 (VLAN, static routing) VLAN Support Yes QoS Yes LACP Yes Form Factor Rack-mountable metal chassis Power AC internal PSU Controller Support UniFi Network Controller & mobile app FAQs Q: What PoE standards does this switch support?A: The UniFi Switch Pro 24 PoE supports 802.3af/at/bt and provides a high PoE power budget for diverse network devices. Q: Can I manage this switch remotely?A: Yes — with the UniFi Network Controller or mobile app. Q: What are the uplink options?A: Dual 10G SFP+ uplinks allow high-speed aggregation to core networks. Q: Is this suitable for CCTV & Wi-Fi deployments?A: Yes — ideal for powering UniFi cameras, APs, VoIP phones, and IoT devices. Downloads USW-Pro-24-POE DatasheetUSW-Pro-24-POE Installation Guide

Read more less

The USW-24-POE is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-24-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-24-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

Read more less

Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input.The Switch Flex Mini (USW Flex Mini) is a fully managed, Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input. The USW Flex Mini can be powered with either PoE (via Port 1) or its included USB-C power adapter*. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app. Features: (1) GbE, 802.3af PoE RJ45 input(4) GbE RJ45 portsCompact, slim housingCan be powered with a 5V, 1A USB-C adapter (Only Comes In Single Pack)

Read more less

The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security. Downloads Datasheet

Read more less

UniFi Pro Aggregation Switch The Switch Pro Aggregation is a fully managed, Layer 3 switch with (28) 10G SFP+ ports and (4) 25G SFP28 ports designed to enhance your network's switching capacity and performance by creating high-bandwidth aggregation links. This rack-mountable switch also offers 760 Gbps switching capacity and features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the Switch Pro Aggregation offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app. Features: (1) 1.3” LCM color touchscreen with AR switch management (28) 10G SFP+ ports (4) 25G SFP28 ports (1) USP RPS DC input 760 Gbps switching capacity Layer 3 switching features Mechanical Dimensions 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") Weight Without Mount: 4.6 kg (10.14 lb) With Mount: 4.7 kg (10.36 lb) Enclosure Material SGCC Steel Hardware Total Non-Blocking Throughput 380 Gbps Switching Capacity 760 Gbps Forwarding Rate 565.44 Mpps Max. Power Consumption 100W Power Method (1) Universal AC input, 100-240VAC, 2A Max, 50/60 Hz (1) USP-RPS DC input, 11.5VDC, 8.7A Power Supply AC/DC, Internal, 100W Network Interface (28) 1/10 Gbps SFP+ Ethernet (4) 1/10/25 Gbps SFP28 Ethernet* LCM Display (1) 1.3" Touchscreen Management Interface Ethernet In-Band Modes SMB Layer 3 10/25 G Fiber Switch ESD/EMP Protection Air: ± 16kV, Contact: ± 12kV Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 10 - 90% Noncondensing *The four SFP28 ports don't support mixed speed at 25Gbps mode. Once one of the SFP28 ports is configured at 25Gbps mode, the others will be limited at 25Gbps too. The SFP28 ports only support mixed speed when all ports are at 1Gbps or 10Gbps. Downloads Datasheet Installation Guide

Read more less

Reliable Multi-WAN Routing and Secure VPN for Australian BusinessesThe TP-Link TL-ER605 is a Gigabit Multi-WAN VPN router built for small to medium businesses that need always-on internet connectivity, secure remote access, and centralised network management. With up to four WAN ports for load balancing and automatic failover, plus full integration with the TP-Link Omada SDN platform, the ER605 delivers enterprise-grade performance at a practical price point.Key Features Five Gigabit Ports — 1 fixed WAN + 3 configurable WAN/LAN + 1 fixed LAN for flexible deployment Up to 4 Active WAN Ports — load balancing and automatic failover across multiple internet connections Highly Secure VPN — supports 20× IPsec, 16× OpenVPN, 16× L2TP, and 16× PPTP tunnels simultaneously 41.5 Mbps IPsec Throughput — fast, encrypted site-to-site and remote access VPN Omada SDN Integration — Zero-Touch Provisioning, centralised cloud management, and intelligent monitoring via Omada app or controller Advanced Security — SPI firewall, DoS defence, IP/MAC/URL filtering 25,000 Concurrent Sessions — handles demanding network loads with ease Flexible WAN Types — PPPoE, Static IP, Dynamic IP, L2TP, PPTP Typical Use Cases Multi-WAN failover for businesses requiring always-on internet (NBN + 4G/5G backup) Secure site-to-site VPN between office locations or remote workers Centralised management of multi-site networks via Omada Cloud Controller Gateway router for CCTV and IP security systems requiring remote VPN access Retail, hospitality, and SMB environments needing robust firewall and content filtering Technical Specifications Specification Detail Model TL-ER605 WAN Ports 1× fixed Gigabit WAN + 3× configurable Gigabit WAN/LAN LAN Ports 1× fixed Gigabit LAN (+ up to 3 configurable) Total Gigabit Ports 5 Standards IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q VPN Tunnels 20× IPsec, 16× OpenVPN, 16× L2TP, 16× PPTP IPsec VPN Throughput 41.5 Mbps Concurrent Sessions 25,000 WAN Connection Types PPPoE, Static IP, Dynamic IP, L2TP, PPTP Flash Memory 16MB SPI DRAM 128MB Power Supply External 9V / 0.85A DC Adapter Dimensions (W×D×H) 158 × 101 × 25 mm Management Omada App, Omada Cloud Controller, Omada Hardware Controller, Web UI Certifications FCC, CE, RoHS Warranty 5 Years Frequently Asked Questions Do I need an Omada controller to use the TL-ER605? No. The ER605 works as a standalone router straight out of the box. An Omada controller (software, cloud, or hardware) is optional and only required if you want centralised multi-device management across a site or multiple sites. Does the ER605 support NBN connections in Australia? Yes. It supports PPPoE, Dynamic IP, Static IP, L2TP, and PPTP WAN types, covering all common NBN connection methods including FTTP, FTTC, FTTN, and HFC. L2TP support also covers NBN services delivered via some Australian ISPs. How many remote VPN users can connect at once? The ER605 supports up to 16 simultaneous OpenVPN tunnels and 16 L2TP tunnels, making it well-suited for small teams needing secure remote access to office resources or CCTV systems. What is the difference between load balancing and failover? Load balancing distributes outbound traffic across multiple WAN connections simultaneously to maximise available bandwidth. Failover automatically switches all traffic to a secondary WAN if the primary connection drops. The ER605 supports both modes. Is the ER605 suitable as a gateway for a CCTV network? Yes. It is commonly deployed as the gateway router in IP camera installations, providing VPN-based remote access to NVRs and cameras without exposing them directly to the internet.

Read more less

Ubiquiti UniFi 16-port Managed Gigabit Switch - 8x PoE+ Ports, 8x Gigabit Ethernet Ports, 2x SFP , 42W, Touch Display, Fanless , GEN2 A 16-port, Layer 2 PoE switch with a silent, fanless cooling system. Features (8) GbE PoE+, (8) GbE ports (2) 1G SFP ports 42W total PoE availability Fanless, silent cooling Technical Specifications Mechanical Dimensions 442 x 200 x 44 mm (17.4 x 7.9 x 1.7") Weight Without mounting brackets: 2.8 kg (6.2 lb)With mounting brackets: 2.9 kg (6.4 lb) Enclosure material SGCC steel Hardware Management interface Ethernet In-Band Networking interface (16) GbE RJ45 ports(2) 1G SFP ports PoE interface (8) PoE/PoE+ (Pins 1, 2+; 3, 6-) Total non-blocking throughput 18 Gbps Switching capacity 36 Gbps Forwarding rate 26.78 Mpps Power method Universal input, 100—240V AC, 50/60 Hz Power supply AC/DC, internal, 60W Supported voltage range 100—240V AC Max. power consumption 18W (Excluding PoE output) Total available PoE 42W Max. PoE wattage per port by PSE PoE+: 32W Voltage range PoE mode PoE: 44—57VPoE+: 50—57V ESD/EMP protection Air: ± 16kV, contact: ± 12kV LCM display (1) 1.3" touchscreen Button Factory reset Shock and vibration ETSI300-019-1.4 Standard Ambient operating temperature -5 to 40° C (23 to 104° F) Ambient operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC Switching Features Layer 2 features IGMP snoopingSTP / RSTP with priorities and port-level disablePort isolationStorm controlVoice VLANPort mirroringLACP port aggregationMulticast / broadcast rate limitingMAC address blockingFlow control802.1X controlJumbo framesProprietary loop protectionDHCP snooping / guardingEgress rate limitLLDP-MEDPort restricted by MACDevice isolation with ACLs Layer 3 features – LEDs System Status Ethernet PoESpeed/link/activity SFP Link/activity Application Requirements UniFi Network Version 7.2.94 and later Downloads USW-16-POE Installation Guide

Read more less

Flexible five-port, Layer 2 PoE switch that can be powered with PoE++.Features: (1) GbE, PoE++ RJ45 input (4) GbE, PoE+ RJ45 ports Up to a 46W total PoE supply* Weatherproof design with multiple mounting options Managed with the UniFi Network application: Version 5.10.3 and later *When powered with a PoE++ switch or a 60W PoE adapter (sold separately). DownloadsDatasheet Installation Guide

Read more less

Hikvision 16 Port Fast Ethernet Smart Managed PoE Switch, DS-3E1318P-EI 16 × 100 Mbps PoE RJ45 ports, 2 × gigabit combos. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. AF/AT camera can reach up to 300 m in extend mode. Downloads DS-3E1318P-EI Datasheet

Read more less

Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports.The Switch Enterprise XG 24 (USW Enterprise XG 24) is a fully managed, mult-gigabit, Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports. The USW Enterprise XG 24 also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally, the USW Enterprise XG 24 offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (24) 10GbE RJ45 ports (2) 25G SFP28 ports (1) USP RPS DC input Layer 3 switching features Single-row RJ45 port layout for easy patch panel cable management Downloads Datasheet Installation Guide

Read more less

TP-Link TL-SL1218P 16-Port PoE+ Rackmount Switch – 150W | 250m Extend Mode | 1U Overview The TP-Link TL-SL1218P is a 1U rackmount PoE+ switch purpose-built for IP camera and surveillance system deployments. With 16 x PoE+ 10/100Mbps ports, a 150W total PoE budget, and a unique 250m Extend Mode for long-distance camera runs, it delivers everything a security installer needs in a single, no-configuration unit. Priority Mode guarantees video quality on Ports 1–8, Isolation Mode separates client traffic with one click, and the combo Gigabit SFP uplink slot provides flexible fibre or copper uplink options. No software, no management interface, no complexity — just plug in and power up. Key Features 16 x PoE+ Ports (Ports 1–16) – IEEE 802.3at/af compliant; up to 30W per port, 150W total PoE budget for powering IP cameras, access points, and other PoE devices. 250m Extend Mode – Extends PoE power and data transmission up to 250 metres over Cat5e/6 cable — purpose-designed for long-distance IP camera runs in large sites, car parks, and perimeter installations. Priority Mode (Ports 1–8) – Guarantees bandwidth and quality of service for video surveillance traffic on the first 8 ports; prevents network congestion from affecting camera streams. Isolation Mode – One-click client traffic separation; prevents connected devices from communicating with each other for improved security and network performance. 2 x Gigabit RJ45 Uplink Ports – High-speed uplinks to your NVR, router, or core switch. 1 x Combo Gigabit SFP Slot – Flexible fibre or copper uplink for long-distance or building-to-building connections. Zero Configuration – Plug-and-play operation; no software, web interface, or management required. 1U Rackmount Form Factor – Standard 19" rack-compatible; 440 × 180 × 44mm. Physical Security Lock – Prevents unauthorised removal from the rack. Use Cases IP camera and NVR installations requiring 16 PoE ports in a single 1U rack unit Long-distance camera runs up to 250m using Extend Mode — car parks, perimeters, warehouses, and large sites Retail, hospitality, and commercial CCTV deployments needing simple plug-and-play PoE switching School, aged care, and healthcare facility surveillance systems Access control and intercom systems requiring multiple PoE-powered endpoints Any installation where a managed switch is unnecessary and simplicity is preferred Technical Specifications Specification Details Model TL-SL1218P PoE Ports 16 × PoE+ 10/100Mbps RJ45 (Ports 1–16) — IEEE 802.3at/af Uplink Ports 2 × 10/100/1000Mbps RJ45 + 1 × Combo Gigabit SFP Total PoE Budget 150W Max PoE Per Port 30W Extend Mode Up to 250m (PoE power & data) Priority Mode Ports 1–8 (Video surveillance priority) Isolation Mode Yes (One-click client separation) Switching Capacity 7.2Gbps Packet Forwarding Rate 5.36Mpps MAC Address Table 8K Jumbo Frame 10KB Transmission Method Store-and-Forward Flow Control IEEE 802.3x Management Unmanaged (No Configuration Required) Physical Security Lock Yes Fans 2 × Internal Fans Power Supply 100–240V AC, 50/60Hz (Internal) Power Consumption (no PoE) 12.71W Power Consumption (max PoE) 172.8W Dimensions (W × D × H) 440 × 180 × 44mm (1U) Weight 2.68kg Network Media 10BASE-T: Cat3/4/5 (max 100m); 100BASE-TX: Cat5/5e (max 100m); 1000BASE-T: Cat5/5e/6+ (max 100m); 1000BASE-X: MMF/SMF Frequently Asked Questions What is Extend Mode and when should I use it? Extend Mode allows the TL-SL1218P to transmit PoE power and data up to 250 metres over Cat5e or Cat6 cable — far beyond the standard 100m Ethernet limit. It is specifically designed for IP camera installations where cameras are located at long distances from the switch, such as car parks, perimeter fences, warehouses, and large commercial sites. Note that in Extend Mode, port speed is reduced to 10Mbps, which is sufficient for standard IP camera streams. What is Priority Mode and which ports does it apply to? Priority Mode applies to Ports 1–8 and guarantees bandwidth priority for devices connected to those ports. This is designed for video surveillance applications where consistent, uninterrupted camera streams are critical. Devices on Ports 1–8 receive priority over traffic on Ports 9–16 when the network is under load. What is Isolation Mode? Isolation Mode prevents connected devices from communicating directly with each other through the switch. All client ports are isolated, meaning cameras and other devices cannot see each other on the network. This improves security by preventing lateral movement between devices and reduces unnecessary broadcast traffic. Is the TL-SL1218P a managed or unmanaged switch? The TL-SL1218P is an unmanaged switch with no web interface, CLI, or SNMP management. It operates via physical DIP switches or buttons for mode selection (Extend, Priority, Isolation). This makes it extremely simple to deploy — ideal for installers who need a reliable PoE switch without the complexity of managed switch configuration. How many IP cameras can the TL-SL1218P power? With 16 PoE+ ports and a 150W total budget, the number of cameras depends on each camera’s power draw. Standard fixed IP cameras typically draw 5–12W, meaning all 16 ports can be used simultaneously within the budget. PTZ cameras or cameras with heaters may draw 15–25W, reducing the number of simultaneously powered ports. Always calculate total PoE load before finalising your design. Can I use the SFP slot for a fibre uplink to an NVR or core switch? Yes. The combo Gigabit SFP slot accepts standard SFP modules (multi-mode or single-mode) for fibre uplink connections. This is useful for building-to-building links or where the NVR or core switch is located more than 100m from the TL-SL1218P. Installer Note: Extend Mode (250m) reduces port speed to 10Mbps — sufficient for most standard IP camera streams but not suitable for high-bitrate 4K cameras or NVR uplinks. Use Extend Mode only on camera ports, not on uplink or NVR ports. Always calculate total PoE load across all 16 ports and ensure it does not exceed the 150W budget, leaving headroom for startup current spikes.

Read more less

TP-Link TL-SG1016PE 16-Port Gigabit PoE+ Switch Overview The TP-Link TL-SG1016PE is a reliable 16-port Gigabit desktop and rackmount switch designed for small-to-medium business networks and professional security installations. With 8 IEEE 802.3af/at compliant PoE+ ports and a 32Gbps backplane, it delivers both data and power over a single cable — ideal for IP cameras, access points, and VoIP phones across Australian commercial and residential sites. Key Features 16 x 10/100/1000Mbps RJ45 ports with Auto Negotiation and Auto MDI/MDIX 8 x PoE+ ports (IEEE 802.3af/at) — power IP cameras, APs, and VoIP devices without separate power adapters 32Gbps non-blocking backplane bandwidth for high-throughput environments 8K MAC address table with auto-learning and auto-aging Store-and-forward switching for reliable, error-free data transfer IEEE 802.3x flow control (full-duplex) and backpressure (half-duplex) Energy-efficient design — reduces power output by up to 75% on inactive ports Plug-and-play — no software configuration required Desktop or 1U rackmount installation flexibility Includes rackmount kit and rubber feet Use Cases CCTV & IP Camera Systems: Power and connect up to 8 PoE IP cameras directly from a single switch — no separate injectors needed. Small Business Networks: Expand office connectivity with Gigabit speeds across all 16 ports. Wireless Access Points: Deploy PoE-powered APs throughout a building without running additional power cabling. VoIP Deployments: Connect PoE-compatible IP phones alongside standard network devices on the same switch. Retail & Hospitality: Centralise network and power distribution in a compact 1U rackmount form factor. Specifications Specification Detail Total Ports 16 x 10/100/1000Mbps RJ45 PoE+ Ports 8 (IEEE 802.3af/at) Backplane Bandwidth 32 Gbps MAC Address Table 8K Buffer Size 1.5 Mbits Transfer Method Store-and-Forward Power Supply 100–240VAC, 50/60Hz Max Power Consumption (PoE on) 124.4W (220V/50Hz) Max Power Consumption (PoE off) 14.4W (220V/50Hz) Fan 1 x internal fan Dimensions (W × D × H) 294 × 180 × 44 mm Operating Temperature 0°C – 40°C Storage Temperature -40°C – 70°C Operating Humidity 10% – 90% (non-condensing) Certifications FCC, CE, RoHS SKU TL-SG1016PE Mounting Desktop / 1U Rackmount In the Box TL-SG1016PE Switch Power cord Rackmount kit Rubber feet Installation guide Frequently Asked Questions How many PoE devices can I connect to the TL-SG1016PE? Up to 8 PoE or PoE+ devices can be powered simultaneously via the dedicated PoE+ ports. The total PoE power budget is 110W, so ensure the combined power draw of connected devices does not exceed this limit. Does this switch require any software configuration? No. The TL-SG1016PE is a plug-and-play unmanaged switch. Simply connect your devices and cables — no login, software, or configuration is required. Can I rackmount this switch? Yes. The package includes a rackmount kit for standard 1U rack installation, as well as rubber feet for desktop use. Is this switch compatible with all PoE IP cameras? It is compatible with any IEEE 802.3af or 802.3at compliant PoE device, which covers the vast majority of IP cameras, wireless access points, and VoIP phones available in Australia. What cable type is required? For Gigabit speeds, use Cat 5e, Cat 6, or above UTP/STP cable up to 100 metres per run. Cat 3 or Cat 5 cable is sufficient for 10/100Mbps connections.

Read more less

The Switch Flex XG (USW Flex XG) is a fully managed, mult-gigabit, Layer 2 switch with (4) 10GbE RJ45 ports and (1) GbE PoE input. The USW Flex XG sports slim, compact housing and can be mounted on a desktop*. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) GbE, 802.3at PoE+ RJ45 input (4) 10GbE RJ45 ports Compact, slim housing Can be powered with a 5V, 5A USB-C adapter * Fanless Switch, Do not stack other hardware on the USW Flex XG, will affect heat dissipation Downloads Datasheet Installation Guide

Read more less

Layer 3, PoE switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.The Switch Enterprise 8 PoE (USW Enterprise 8 PoE) is a fully managed, Layer 3* switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.The USW Enterprise 8 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights. This switch can be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.Features: (1) 1.3" LCM color touchscreen with AR switch management (8) 2.5GbE, 802.3at PoE+ RJ45 ports (2) 10G SFP+ ports 120W total PoE supply Wall-mountable (kit included) * Layer 3 switching will become available in a future firmware update. Managed with the UniFi Network application: Version 6.3.51 and later Downloads Datasheet Installation Guide

Read more less

The Dahua DH-CS4218-16ET-190 is a professional-grade 18-port cloud managed desktop switch that utilizes 16 ports for Power over Ethernet, including Hi-PoE with a power output of 90W and PoE+ providing a total of 190W. Features Meets the requirements of IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z standards. Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE and IEEE802.3bt power supply standards. Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof. Specifications Dahua Cloud PoE Switch ETHERNET PORT 18 OPTICAL PORT 2 UPLINK PORT 2 POE BUDGET Idling: 6 W, Full load: 212 W LAYER Layer 2 TYPE Cloud Managed Downloads Dahua DH-CS4218-16ET-19 Datasheet 20230807 Dahua Ethernet Switch (Cloud Managed Switch) User's Manual V1.0.0 Dahua Ethernet Switch (Cloud Managed PoE Switch) Quick Start Guide V1.0.1 Dahua CS4218-16ET-190 Dimensions Dahua CS4218-16ET-190 Port

Read more less

Hikvision 24 Port Fast Ethernet Smart PoE Switch, DS-3E1326P-EI, 2 × Gigabit Ports, 24 x 100Mbps The Hikvision 24 Port Fast Ethernet Smart PoE Switch is a reliable and efficient networking solution, featuring 24 ports with 100 Mbps speed and 2 gigabit combos. With IEEE 802.3at/af standard for PoE ports and 6 KV surge protection, it provides efficient network management and extended reach for AF/AT cameras up to 300m. Features 24 × 100 Mbps PoE RJ45 ports, 2 × gigabit combos. Ports 1-24 are 10/100 Mbps, NOT gigabit. Ports 25 and 26 are gigabit SFP/RJ45 combo uplink ports. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. AF/AT camera can reach up to 300 m in extend mode. More Information DatasheetHikvision Quick Start GuideHikvision User Manual

Read more less

TP-Link TL-SG2016P — 16-Port Gigabit Smart Switch with 8-Port PoE+ The TP-Link TL-SG2016P JetStream is a compact, cost-effective smart switch designed for small to medium-sized businesses and surveillance deployments. With 8 PoE+ ports delivering up to 120W total, full Gigabit speeds across all 16 ports, and seamless integration into the Omada SDN platform, it simplifies network deployment and management without the complexity of a full L3 managed switch. Key Features 8× PoE+ Ports (802.3at/af): Power IP cameras, wireless access points, VoIP phones, and other PoE devices — up to 30W per port with a combined budget of 120W. Full Gigabit Connectivity: 8× Gigabit PoE+ ports and 8× Gigabit non-PoE ports provide high-speed wired connections for all devices. Omada SDN Integration: Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring via the Omada Controller or cloud portal. Omada App Support: Configure settings, monitor network status, and manage clients from your smartphone or tablet — iOS and Android compatible. Advanced Security: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication. QoS Optimisation: L2/L3/L4 QoS and IGMP Snooping prioritise voice and video traffic for smooth, uninterrupted performance. Simplified Cabling: Single Ethernet cable carries both data and power to PoE devices — reducing infrastructure costs and installation complexity. Use Cases IP CCTV & Surveillance: Power and connect up to 8 IP cameras from a single switch — no separate power injectors or additional cabling required. Small Business Networks: Provide reliable Gigabit connectivity for PCs, printers, IPTV, and PoE devices across a single floor or office. Wireless Access Point Deployment: Power and manage multiple Omada EAPs from one switch for seamless Wi-Fi coverage. VoIP & Unified Communications: QoS prioritisation ensures clear, reliable voice calls across your IP phone system. Retail & Hospitality: Compact 1U form factor fits neatly in small comms rooms or wall-mount enclosures for discreet deployment. Technical Specifications Category Specification Total Ports 16× Gigabit RJ45 PoE+ Ports 8× (IEEE 802.3at/af) Non-PoE Ports 8× Gigabit RJ45 PoE Budget 120W total, up to 30W per port Switching Capacity 32 Gbps Forwarding Rate 23.8 Mpps QoS L2/L3/L4, 802.1p CoS/DSCP Security ACL, 802.1X, DHCP Snooping, DoS Defence, Storm Control Management Omada App, Web GUI, Omada SDN Controller Weight 1.98 kg SKU / Part Number TL-SG2016P Barcode (EAN) 4897098689493 Downloads 📄 Download TL-SG2016P Datasheet (PDF) Frequently Asked Questions How many IP cameras can the TL-SG2016P power? Up to 8 IP cameras simultaneously via its PoE+ ports. With a 120W total budget and up to 30W per port, it comfortably supports standard IP cameras drawing 10–15W each. For larger camera counts, consider the TL-SG3452P with 48 PoE+ ports. What is the difference between a Smart Switch and a fully Managed Switch? A Smart Switch (like the TL-SG2016P) offers essential management features — VLANs, QoS, IGMP Snooping, and security — via a web GUI or Omada app, making it ideal for SMBs. A fully Managed Switch adds advanced features like static routing, CLI access, SNMP, and RMON for larger enterprise environments. Does this switch require the Omada Controller to operate? No. The TL-SG2016P can be managed in standalone mode via its web interface. The Omada Controller (hardware, software, or cloud-based) is optional and recommended for multi-device or multi-site deployments requiring centralised management. Is the TL-SG2016P compatible with non-TP-Link PoE devices? Yes. All PoE+ ports comply with IEEE 802.3at/af standards, ensuring compatibility with any standards-compliant PoE device — including IP cameras, access points, and VoIP phones from third-party manufacturers. Can I use this switch with Omada EAPs (wireless access points)? Yes. The TL-SG2016P is fully compatible with Omada EAPs and can power and manage them directly. When used with an Omada Controller, you gain centralised visibility and control over your entire wireless and wired network. What warranty applies in Australia? TP-Link products sold in Australia are covered by a standard manufacturer's warranty. Please contact us or refer to the product documentation for current warranty terms applicable to your purchase.

Read more less

High-Density 2.5G PoE+ Switching with 10G Uplinks and Full Cloud Management The TP-Link Omada SG3218XP-M2 is a rack-mountable L2+ managed switch designed for enterprise, campus, and ISP networks that demand high-throughput connectivity and centralised control. With 16 × 2.5G PoE+ ports, 8 of which deliver PoE+ power, and 2 × 10G SFP+ uplink ports, it provides the bandwidth and power headroom needed for modern Wi-Fi 6/6E access points, IP cameras, VoIP systems, and high-speed workstations — all managed through the Omada SDN platform from a single cloud interface. Key Features 16× 2.5G RJ45 Ports — Full 2.5 Gbps per port for high-throughput connections to Wi-Fi 6/6E APs, NVRs, workstations, and other 2.5G-capable devices 8× PoE+ Ports (802.3at) — Powers PoE+ devices including access points, IP cameras, and VoIP phones directly over Ethernet; total PoE budget supports mixed deployments 2× 10G SFP+ Uplink Ports — High-speed fibre or DAC uplinks to core switches or routers, with backward compatibility for Gigabit SFP modules Omada SDN Cloud Management — 100% centralised cloud management of switches, access points, and gateways from a single interface, accessible from anywhere via the Omada app or web portal L2+ Static Routing — Enables inter-VLAN routing within the switch for efficient network segmentation without a dedicated router Advanced QoS (L2–L4) — Prioritises voice, video, and critical data traffic by IP/MAC address, TCP/UDP port, or VLAN to ensure smooth, jitter-free performance Comprehensive Security — IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS protection, and 802.1X authentication with RADIUS/TACACS+ support Full L2 Feature Set — 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, LACP Link Aggregation, IGMP Snooping, Loopback Detection, and Cable Diagnostics ISP-Grade Features — 802.3ah OAM, DDM (Digital Diagnostic Monitoring), sFlow, QinQ, L2PT, PPPoE ID Insertion, and IGMP Authentication for service provider deployments IPv6 Ready — Dual IPv4/IPv6 stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery for next-generation network readiness Multi-User Management — Role-based access control with multi-level permissions for flexible network operation across teams Enterprise Management Interfaces — Web GUI, CLI, SNMP v1/v2c/v3, RMON, Dual Image, and Dual Configuration for maximum uptime and flexibility Typical Use Cases Enterprise LAN distribution or access layer with high-density Wi-Fi 6/6E AP deployments requiring 2.5G PoE+ connectivity Commercial CCTV and IP surveillance installations with multiple PoE-powered cameras and a central NVR Education and campus networks requiring centralised Omada SDN management across multiple sites Hospitality venues (hotels, resorts) deploying high-density wireless with centralised guest network control ISP aggregation and edge deployments leveraging QinQ, OAM, sFlow, and PPPoE ID Insertion SME and mid-market offices upgrading from Gigabit to 2.5G for faster wired workstation and NAS connectivity Technical Specifications Specification Detail Model SG3218XP-M2 RJ45 Ports 16× 2.5G (100M/1G/2.5G auto-negotiation) PoE Ports 8× PoE+ (IEEE 802.3at), ports 1–8 SFP+ Uplink Ports 2× 10G SFP+ (compatible with 1G SFP modules) Switch Type L2+ Managed Management Omada SDN (cloud & on-premises), Web GUI, CLI, SNMP v1/v2c/v3, RMON L2 Features 802.1Q VLAN, STP/RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, Loopback Detection, Cable Diagnostics L2+ Features Static Routing (inter-VLAN) QoS L2–L4 QoS, Voice VLAN, traffic prioritisation by IP/MAC/TCP/UDP/VLAN Security IP-MAC-Port Binding, ACL (L2–L4), Port Security, DHCP Snooping, Storm Control, DoS Protection, 802.1X (RADIUS/TACACS+) ISP Features 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Authentication IPv6 Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Reliability Dual Image, Dual Configuration Form Factor Rack-mountable (1U) Weight 3.19 kg Barcode (EAN) 4897098689721 SKU SG3218XP-M2 Downloads SG3218XP-M2 Datasheet (PDF) Frequently Asked Questions What is the total PoE power budget? The SG3218XP-M2 provides PoE+ (802.3at) on ports 1–8. For the exact total PoE power budget, refer to the datasheet linked above or the TP-Link product page, as the budget determines how many high-wattage devices (such as PTZ cameras or Wi-Fi 6 APs) can be powered simultaneously. Can I manage this switch without the Omada cloud? Yes. The SG3218XP-M2 supports standalone web GUI management, CLI, and SNMP without requiring cloud connectivity. Omada SDN cloud management is optional and adds centralised multi-site control via the Omada app or web portal. Does it support inter-VLAN routing? Yes. The L2+ static routing feature enables inter-VLAN routing directly on the switch, allowing traffic to pass between VLANs without a dedicated router — useful for segmenting IoT, camera, and corporate traffic on the same physical infrastructure. Are the 10G SFP+ ports compatible with standard 1G SFP modules? Yes. The SFP+ uplink ports are backward compatible with standard 1G SFP modules, giving you flexibility to use existing fibre infrastructure while leaving room to upgrade to 10G when required. Is this switch suitable for CCTV and IP surveillance deployments? Yes. The combination of PoE+ ports, IGMP Snooping for multicast video streams, QoS prioritisation, and Omada centralised management makes the SG3218XP-M2 well-suited for commercial IP surveillance installations with multiple cameras and an NVR. What is DDM (Digital Diagnostic Monitoring)? DDM allows you to monitor the real-time status of SFP/SFP+ modules inserted into the switch, including temperature, voltage, bias current, and TX/RX power levels. You can also configure alarm and warning thresholds to receive alerts before a module fails.

Read more less

PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting Can be installed horizontally or vertically making it ideal for desktop, magnetic wall-mount, and pole-mount installations. Indoor/Outdoor Design Designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options, the USW-Flex provides both flexibility and durability Seamless Integration Fully configurable through UniFi Controller

Read more less

UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Switch Pro 48 is an ideal aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.Features: (48) Gigabit RJ45 ports (4) 10G SFP+ ports Layer 2 and Layer 3* features UniFi SmartPower RPS DC input Near-silent cooling 1.3" touchscreen display Managed by UniFi Network Controller * Available in future firmware upgrade.

Read more less

Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input. The Switch Flex Mini (USW Flex Mini) is a fully managed, Layer 2 switch with (5) GbE RJ45 ports, including (1) 802.3af PoE input. The USW Flex Mini can be powered with either PoE (via Port 1) or its included USB-C power adapter*. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app. Features: (1) GbE, 802.3af PoE RJ45 input (4) GbE RJ45 ports Compact, slim housing Can be powered with a 5V, 1A USB-C adapter (Only Comes In Single Pack)

Read more less

UniFi Aggregation SwitchUSW-Aggregation is a managed Layer 2 switch with eight 10G SFP+ ports, offering link aggregation for higher capacity and increased availability. USW-Aggregation features Layer 2 capabilities and supports highbandwidth links, making it ideal for aggregation switching to any UniFi solution that deploys various interconnect topologies. Built-in 36W AC/DC power supply can support copper Ethernet UF-RJ45-10G modules (sold separately) in all eight ports. MechanicalDimensions 442.4 x 120 x 43.7 mm (17.42 x 4.72 x 1.72")Weight Without Mount: 2.65 kg (5.84 lb)With Mount: 2.74 kg (6.04 lb)Enclosure Material SGCCSteel HardwareTotal Non-Blocking Throughput 80 GbpsSwitching Capacity 160 GbpsForwarding Rate 119.04 MppsMax. Power Consumption 30WPower Method Universal AC Input: 100-240VAC, 50/60 HzPower Supply AC/DC, Internal, 36WManagement Interface EthernetIn-BandModes SMB Layer 2 GigabitEthernetSwitchESD/EMP Protection Air: ± 16kV, Contact: ± 12kVOperating Temperature -5 to 40° C(23 to 104° F)Operating Humidity 10 - 90%NoncondensingCertications CE, FCC, IC

Read more less

24-Port PoE+ Switching Made Simple for SMB and CCTV InstallationsThe TP-Link TL-SG1428PE is a 28-port Gigabit Easy Smart switch that bridges the gap between unmanaged and fully managed switches. With 24 IEEE 802.3at/af PoE+ ports, 4 Gigabit SFP uplink slots, and an intuitive web interface, it gives installers and small business network administrators essential management features — including VLAN segmentation and QoS — without the complexity of a full L2+ managed switch.Key Features 24× Gigabit PoE+ Ports (802.3at/af) — power IP cameras, wireless access points, VoIP phones, and access control devices over a single cable 4× Gigabit SFP Uplink Slots — fibre or copper uplinks for high-speed backbone connectivity 250W Total PoE Budget — up to 30W per port to support demanding PoE+ devices 56 Gbps Switching Capacity — non-blocking performance for high-density deployments 32× VLAN Support — segment network traffic for security, guest access, and IoT isolation QoS (802.1p/DSCP) — prioritise voice and video traffic for consistent performance Easy Smart Web Interface — simplified management without CLI or complex configuration Rack-Mountable, 1U — standard 19-inch rack form factor for network cabinet installation 5-Year Warranty Typical Use Cases PoE switching for IP CCTV systems with up to 24 cameras Small to medium business networks requiring basic VLAN segmentation Wireless access point deployments in offices, schools, and retail environments VoIP phone systems needing QoS prioritisation Network upgrades from unmanaged switches where basic management is needed Technical Specifications Specification Detail Model TL-SG1428PE RJ45 Ports 24× 10/100/1000Mbps PoE+ (802.3at/af) SFP Slots 4× Gigabit SFP Total Ports 28 PoE Standard IEEE 802.3at/af PoE Budget 250W total / 30W per port Switching Capacity 56 Gbps Packet Forwarding Rate 41.7 Mpps MAC Address Table 8K Packet Buffer 4.1 Mbit Jumbo Frame 9KB VLAN 32× 802.1Q VLANs QoS Port-based, 802.1p, DSCP Management Easy Smart Web Interface Form Factor 1U Rack-Mountable Certifications FCC, CE, RoHS Warranty 5 Years Frequently Asked Questions What is the difference between the TL-SG1428PE and the TL-SG3428MP? The TL-SG1428PE is an Easy Smart switch with a simplified web interface, 32 VLANs, and basic QoS — ideal for straightforward CCTV and SMB deployments. The TL-SG3428MP is a full L2+ managed switch with Omada SDN integration, static routing, advanced ACL security, LACP link aggregation, and IGMP snooping, suited to more complex enterprise network environments. How many IP cameras can the TL-SG1428PE power? With a 250W PoE budget and 24 PoE+ ports, it can power up to 24 cameras. Actual capacity depends on each camera’s power draw — cameras drawing 10–15W each will allow the full 24 ports to be used simultaneously. Does the TL-SG1428PE support VLAN isolation for CCTV traffic? Yes. It supports up to 32 802.1Q VLANs, allowing you to isolate CCTV traffic on a dedicated VLAN separate from staff, guest, or IoT networks. Can I use fibre uplinks with this switch? Yes. The 4× Gigabit SFP slots support fibre transceivers for long-distance uplinks to a core switch or NVR, as well as SFP-to-RJ45 copper modules. Does this switch require any special software to manage? No. The TL-SG1428PE is managed entirely through a built-in web interface accessible from any browser on the local network. No additional software, controller, or app is required.

Read more less

Ubiquiti UniFi 48 port Managed Gigabit Layer2 & Layer3 switch - 48x Gigabit Ethernet Ports w/ 32x 802.3at POE+, 4x SFP Port Touch Display 210W The USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide statusManaged and configured by the UniFi Network Controller with UniFi mobile app support, the USW-48-PoE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.A 48-port, Layer 2 PoE switch with a silent, fanless cooling system. Features: (32) GbE, PoE+ RJ45 ports (16) GbE RJ45 ports (4) 1G SFP ports 195W total PoE availability 1.3" LCM color touchscreen with AR switch management Managed with the UniFi Network application: Version 7.2.94 Management (48) 10/100/1000 RJ45 Ports (4) 1G SFP Ethernet Ports Ethernet In-Band Power Method 100-240VAC, 50/60 Hz, Universal Input Power Supply AC/DC, Internal, 240W Supported Voltage Range 100 to 240VAC Max. Power Consumption (Excluding PoE Output) 45W LEDs RJ45 Data Ports SFP Data Ports PoE; Speed/Link/Activity Link/Activity ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 10 to 90% Noncondensing Certifications CE, FCC, IC POE PoE Interfaces Ports 1-32 POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) Max. PoE Wattage per Port by PSE 802.3at 32W Voltage Range 802.3af Mode 44-57V Voltage Range 802.3at Mode 50-57V Downloads DatasheetInstallation Guide

Read more less

THE SWITCH PRO 48 POE (USW PRO 48 POE) IS A FULLY MANAGED SWITCH WITH (40) GBE, POE+ RJ45 PORTS, (8) GBE, POE++ RJ45 PORTS, AND (4) 10G SFP+ PORTS. The USW Pro 48 PoE combines a rich set of Layer 2 features with advanced Layer 3 tools including inter-VLAN routing, static routing, and a DHCP server. The USW Pro 48 PoE is the ideal access layer switch for any UniFi system. It combines up to 600W of PoE power with SmartPower RPS (USP RPS) power redundancy. The switch can also be monitored and configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.  FEATURES: (1) 1.3" LCM color touchscreen with AR switch management (40) GbE, PoE+ RJ45 ports (8) GbE, PoE++ RJ45 ports (4) 10G SFP+ ports (1) USP RPS DC input 600W total PoE supply Near-silent cooling Layer 3 switching features Managed with the UniFi Network application: Version 5.10.5 and later

Read more less

The EP-S16 features 16 RJ45 Ethernet ports and two SFP+ ports.The Ubiquiti Edgepoint EP-S16 provides advanced features, including:• MSTP/RSTP/STP• VLAN, Private VLAN, Voice VLAN• Link Aggregation• DHCP Snooping, IGMP Snooping• TACACS+, RADIUS, 802.1X, MAC Filtering, ACL• DiffServ, CoS• Static Routing, Policy-Based RoutingUbiquiti Edgepoint EP-S16 Bottom Panel• Power Options• 54VDC, 6A Terminal Block• Dual PoE Input• 1x Console Port• Data Ports• 16x RJ45 Ports• 2x SFP+ PortsSixteen RJ45 ports support PoE:• PoE Input or Output• 2x Ports with Two Options:54V, 1.5A Passive PoE Input or 54 or 24V, 1.4A Passive PoE Output*• PoE Output• 2x 54 or 24V, 1.4A Passive PoE Output Ports*• 12x PoE+ or 24V, 0.7A Passive PoE Output Ports*Cabling Protection• FiberProtect Strain Relief for Fiber Optic Strands• Cable Sleeve and Option for Conduit (Not Included)• Cable Tie Slots (Cable Ties Not Included)Back Panel• Lanyard Loop for Ease of Installation• Slot for PicoStationM2HP (Not Included) to Allow for WirelessManagement• Pole-Mount Bracket (Wall-Mount Bracket Also Included)• Ground Bonding Point

Read more less