TP-Link TL-SG3452X JetStream 48-Port Gigabit L2+ Managed Switch with 4-Port 10GE SFP+ The TP-Link TL-SG3452X is a professional 48-port Gigabit L2+ managed switch designed for enterprise, campus, and commercial network deployments across Australia. With 48 × Gigabit RJ45 access ports, four 10GE SFP+ uplink slots for non-blocking high-speed connectivity to core switches and servers, Zero-Touch Provisioning (ZTP), and full Omada SDN integration, it delivers the port density, uplink performance, and management capability required for large-scale wired network deployments — without the PoE overhead of the TL-SG3452XP where PoE is not required. Key Features 48 × Gigabit RJ45 Ports — High-speed 10/100/1000Mbps access ports for reliable wired connectivity to PCs, servers, IP phones, printers, and other network devices at scale. 4 × 10GE SFP+ Uplink Slots — Non-blocking 10G fibre or DAC uplinks to core switches and servers for ultra-low latency and maximum throughput under full load. Zero-Touch Provisioning (ZTP) — Automatically provisions the switch from the Omada cloud on first boot — no on-site configuration required, ideal for remote or multi-site deployments. Omada SDN Integration — Centrally manage the switch alongside Omada APs and routers from the Omada Controller, cloud portal, or Omada app for 100% centralised network management. L2+ Feature Set — Comprehensive L2 and L2+ features including Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP Link Aggregation, Port Mirroring, and IGMP Snooping. Enterprise QoS — Prioritise voice, video, and critical traffic by IP address, MAC address, TCP/UDP port, and VLAN ID for consistent performance across all 48 ports under load. Robust Security — IP-MAC-Port-VID Binding, 802.1X authentication (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, Port Security, Storm Control, and DoS prevention. Standalone Management — Web UI, CLI (Console, Telnet, SSH), SNMP, RMON, and Dual Image for full enterprise-grade standalone management without a controller. ISP Features — sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP authentication, 802.3ah OAM, and DLDP for service provider and carrier-grade deployments. IPv6 Ready — Full IPv6 support including Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery. 1U Rackmount Form Factor — Standard 19-inch 1U rack design for clean data centre and comms room installation. Use Cases Large enterprise and campus networks requiring a 48-port Gigabit access layer switch with 10GE uplinks to a core switch Office buildings and commercial sites needing high-density wired connectivity for PCs, IP phones, printers, and servers without PoE overhead Omada SDN deployments requiring a large-scale managed Gigabit access switch with ZTP for remote or multi-site provisioning Education facilities — schools, TAFEs, and universities — requiring high-density wired switching for computer labs and staff networks ISP and service provider aggregation networks requiring QinQ, sFlow, OAM, and DLDP features at the access layer Data centre and server room environments requiring a high-density 1U Gigabit access switch with 10GE SFP+ uplinks TL-SG3452X vs TL-SG3452XP — Which Do I Need? Feature TL-SG3452X (This Model) TL-SG3452XP PoE No PoE 48 × PoE+ (500W budget) Best For PCs, servers, IP phones (with separate PoE switch) APs, IP cameras, VoIP phones (PoE-powered) Price Lower Higher Technical Specifications Specification Detail Model TL-SG3452X RJ45 Ports 48 × 10/100/1000Mbps Gigabit SFP+ Uplinks 4 × 10GE SFP+ PoE None Switch Type L2+ Managed (JetStream) Zero-Touch Provisioning Yes (via Omada SDN) L2+ Features Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, QoS Security 802.1X (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, IP-MAC-Port-VID Binding, Storm Control, DoS Prevention Management Web UI, CLI (Console/Telnet/SSH), SNMP, RMON, Dual Image; Omada SDN (cloud & on-premises) ISP Features sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Auth, 802.3ah OAM, DLDP IPv6 Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Form Factor 1U Rackmount (19-inch) Weight 4.06 kg Warranty 2 Years Recommended Accessories TP-Link Omada ER7212PC 3-in-1 VPN Router — Pair as the core router and Omada controller in a complete Omada SDN deployment, with the TL-SG3452X as the Gigabit access layer switch. TP-Link TL-SG3452XP 48-Port Gigabit PoE+ Managed Switch — Deploy alongside the TL-SG3452X in a two-switch architecture — TL-SG3452X for non-PoE wired devices, TL-SG3452XP for PoE-powered APs and cameras. 10GE SFP+ DAC Cable or Fibre Module — For connecting the TL-SG3452X to a core switch or server via the SFP+ uplink slots at full 10G speed. Cat6 Ethernet Cable — For reliable Gigabit connectivity to all 48 connected devices. Downloads TL-SG3452X Datasheet (PDF) Frequently Asked Questions What is the difference between the TL-SG3452X and the TL-SG3452XP? The TL-SG3452X provides 48 Gigabit ports with no PoE, making it suited for environments where connected devices have their own power supply — such as PCs, servers, and IP phones with separate power adapters. The TL-SG3452XP adds 802.3af/at PoE+ on all 48 ports with a 500W budget, suited for powering access points, IP cameras, and VoIP phones via PoE. The TL-SG3452X is the lower-cost option where PoE is not required. What is Zero-Touch Provisioning (ZTP) and how does it work? Zero-Touch Provisioning allows the TL-SG3452X to automatically download its configuration from the Omada cloud controller on first boot — without any on-site manual configuration. This is particularly valuable for multi-site deployments where switches are shipped directly to remote locations and configured remotely by a central IT team, eliminating the need for a technician to be present at each site during installation. Does the TL-SG3452X require an Omada Controller? No. The TL-SG3452X supports full standalone management via web UI, CLI (Console, Telnet, SSH), SNMP, and RMON without any controller. Omada SDN integration and ZTP are optional features that add centralised multi-device management, cloud access, and remote provisioning — recommended for large or multi-site deployments. Can I add PoE to the TL-SG3452X? The TL-SG3452X does not support PoE on its RJ45 ports and cannot be upgraded to add PoE. If PoE is required for some or all ports, consider the TL-SG3452XP (48 × PoE+ ports, 500W budget) or deploy a separate PoE switch or PoE injector for specific devices that require PoE power. What SFP+ modules or cables are compatible with the uplink slots? The four SFP+ slots support standard 10GE SFP+ modules including TP-Link’s own SFP+ transceivers (single-mode and multi-mode fibre) and DAC (Direct Attach Copper) cables. Check TP-Link’s compatibility list for third-party SFP+ module support.

Read more less

TP-Link TL-POE10E — Fast Ethernet PoE+ Extender The TP-Link TL-POE10E is a compact, plug-and-play PoE extender that pushes your PoE or PoE+ network connection an additional 100–250 metres beyond the standard 100-metre Ethernet limit. Powered entirely by the upstream PoE switch — no power outlet, no configuration, no extra cabling required — it’s the simplest and most cost-effective way to reach remote IP cameras, access points, and entry systems on large sites across Australia. Key Features Extends PoE Range by Up to 250m: Adds up to 100m at 100 Mbps or up to 250m at 10 Mbps beyond your PoE switch — ideal for long cable runs across large sites. Plug and Play: No configuration or software required. Connect it inline between your PoE switch and end device and it works immediately. 802.3af/at Compliant: Compatible with any standards-compliant PoE or PoE+ switch and end device, including IP cameras, access points, and VoIP phones. 20W PoE Output: Delivers up to 20W of power to the connected PoE device — sufficient for most IP cameras and wireless access points. 2× 10/100 Mbps Ports: One uplink port connects to your PoE switch; one downlink port connects to your PoE-powered end device. Powered by PoE: Draws power directly from the upstream PoE switch — no separate power supply or power outlet needed at the extender location. Compact & Lightweight: At just 60g, it’s easy to conceal in ceiling cavities, conduit boxes, junction boxes, or wall enclosures. Use Cases IP CCTV & Surveillance: Reach cameras at the far end of a car park, warehouse, or large building without re-running cable from the switch room. Outdoor Access Points: Extend PoE to wireless access points on building exteriors, sports fields, or car parks beyond the standard 100m limit. Entry & Intercom Systems: Power and connect IP intercoms or access control readers at gate entries or remote building entrances. Retail & Hospitality: Extend network drops to POS terminals, digital signage, or PoE devices in large floor plans without additional cabling infrastructure. Temporary or Staged Deployments: Quickly extend a PoE run during construction, events, or staged rollouts without permanent cable changes. Specifications Model TL-POE10E Ports 2× 10/100 Mbps RJ45 (1× uplink, 1× downlink) PoE Standard IEEE 802.3af/at (PoE/PoE+) PoE Output Power Up to 20W Extension Range (100 Mbps) Up to 100m Extension Range (10 Mbps) Up to 250m Power Source Upstream PoE switch (no external power required) Configuration Plug and Play — no setup required Weight 60g Certifications CE, FCC, RoHS Frequently Asked Questions How far can the TL-POE10E extend a PoE connection? The TL-POE10E extends your PoE run by up to 100 metres at 100 Mbps, or up to 250 metres at 10 Mbps. This is in addition to the standard 100m from your PoE switch, giving a total potential run of up to 350 metres in 10 Mbps mode. Does the TL-POE10E need its own power supply? No. The extender is powered entirely by the upstream PoE switch — no power outlet or separate adapter is required at the extender location. This makes it ideal for ceiling, conduit, or outdoor enclosure installations. Can I daisy-chain multiple TL-POE10E extenders? TP-Link does not officially recommend daisy-chaining multiple extenders, as each unit introduces additional latency and power loss. For very long runs, consider running a dedicated fibre or copper cable from the switch room instead. Is the TL-POE10E compatible with any PoE switch? Yes. It complies with IEEE 802.3af/at standards, making it compatible with any standards-compliant PoE or PoE+ switch from any manufacturer, including TP-Link, Hikvision, Dahua, Cisco, and others. What devices can be powered by the TL-POE10E? Any 802.3af/at-compliant PoE device drawing up to 20W — including most IP cameras, wireless access points, VoIP phones, and IP intercoms. Devices requiring more than 20W (such as PTZ cameras with heaters) may not be supported. Is the TL-POE10E suitable for outdoor use? The TL-POE10E itself is not rated for direct outdoor exposure. It should be installed inside a weatherproof enclosure or junction box when used in outdoor or exposed environments. Downloads 📄 TL-POE10E Datasheet (PDF)

Read more less

10Gbps Single-Mode Fibre Transceiver for Long-Distance Network Uplinks The TP-Link TL-SM5110-LR is a 10GBase-LR SFP+ transceiver module designed for 10Gbps data transmission over single-mode fibre at distances up to 10km. Hot-pluggable and SFP+ MSA compatible, it slots directly into any 10G SFP+ port on compatible TP-Link JetStream switches and most third-party switches — making it a reliable, cost-effective solution for long-distance fibre uplinks in commercial networks, data centres, and multi-building installations across Australia. Key Features 10GBase-LR, 10km Reach: Transmits 10Gbps data over 9/125μm single-mode fibre at distances up to 10km — ideal for inter-building and campus network links. LC Duplex Connector: Standard LC duplex interface compatible with widely available single-mode fibre patch leads and infrastructure. Hot-Pluggable: Insert or remove the transceiver without powering down the switch — minimising downtime during installation or replacement. Digital Diagnostic Monitoring (DDM): Real-time monitoring of transceiver parameters including temperature, voltage, TX power, and RX power — enabling proactive fault detection and network health monitoring. SFP+ MSA Compatible: Compliant with the 10G Small Form-factor Pluggable Multi-Source Agreement, ensuring broad compatibility with TP-Link JetStream switches and most third-party 10G SFP+ ports. 1310nm Wavelength: Standard LR wavelength for single-mode fibre, compatible with existing SMF infrastructure. 3.3V Low Power Operation: Energy-efficient design suitable for high-density switch deployments. Common Use Cases 10Gbps fibre uplinks between access switches and core switches in commercial buildings Inter-building fibre connections on campuses, industrial sites, and business parks Data centre top-of-rack to aggregation switch connections Upgrading existing single-mode fibre infrastructure to 10Gbps speeds Long-distance NVR-to-switch uplinks in large CCTV installations Compatible TP-Link Switches The TL-SM5110-LR is compatible with TP-Link JetStream switches featuring 10G SFP+ ports, including: TL-SG3428X TL-SG3428XMP TL-SG3452X TL-SG3428XF Other TP-Link switches with 10G SFP+ slots Also compatible with most third-party switches that accept SFP+ MSA-compliant modules. Always verify compatibility with your specific switch model before purchasing. Technical Specifications Model TL-SM5110-LR Standard 10GBase-LR (IEEE 802.3ae) Data Rate 10 Gbps Connector Type LC Duplex Fibre Type 9/125μm Single-Mode (SMF) Wavelength 1310nm Max Cable Length 10km DDM Support Yes SFP+ MSA Compatible Yes Hot-Pluggable Yes Power Supply 3.3V DC Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Operating Humidity 10–90% RH (non-condensing) Dimensions (W × D × H) 122.5 × 81.5 × 38.5mm Weight 60g Certifications FCC, CE Frequently Asked Questions What is the difference between 10GBase-LR and 10GBase-SR? 10GBase-LR (Long Range) uses 1310nm wavelength over single-mode fibre and supports distances up to 10km. 10GBase-SR (Short Range) uses 850nm wavelength over multi-mode fibre and is limited to distances of 26–300m depending on the fibre grade. Use LR for inter-building or campus links; use SR for short in-rack or in-building connections. Will this transceiver work in non-TP-Link switches? The TL-SM5110-LR is SFP+ MSA compliant, which means it is designed to work in any switch with a standard 10G SFP+ port. However, some switch vendors (notably Cisco and certain enterprise brands) lock their switches to accept only vendor-coded modules. Always verify compatibility with your specific switch model before purchasing. What fibre cable do I need? You need 9/125μm single-mode fibre (SMF) patch leads with LC duplex connectors on both ends. Ensure your fibre infrastructure is single-mode — this transceiver is not compatible with multi-mode fibre (OM1, OM2, OM3, OM4). What does Digital Diagnostic Monitoring (DDM) do? DDM allows the switch to read real-time performance data from the transceiver — including optical transmit and receive power levels, temperature, supply voltage, and laser bias current. This helps network administrators detect degraded transceivers or fibre links before they cause outages. DDM data is typically viewable via the switch's management interface. Can I hot-swap this transceiver without rebooting the switch? Yes. The TL-SM5110-LR is hot-pluggable, meaning you can insert or remove it while the switch is powered on and running. This minimises disruption during installation, replacement, or maintenance. Is this transceiver suitable for CCTV installations? Yes. For large CCTV installations where the NVR or core switch is more than 100m from an access switch, a fibre uplink using the TL-SM5110-LR is the recommended solution. It provides a 10Gbps, interference-free link over distances up to 10km — well beyond the 100m limit of copper Ethernet.

Read more less

TP-Link TL-POE4824G 48V Passive PoE Gigabit Adapter Power Your TP-Link Devices Over a Single Ethernet Cable The TP-Link TL-POE4824G is a 48V passive PoE Gigabit adapter that simultaneously delivers power and data to compatible TP-Link passive PoE devices over a single RJ45 cable — no separate power outlet required at the device end. Plug-and-play with no configuration needed, it's a simple and cost-effective solution for powering access points, IP cameras, and other passive PoE equipment in homes, offices, and commercial installations across Australia. Key Features 48V passive PoE — powers compatible TP-Link passive PoE devices over a single Ethernet cable Gigabit speed support — full 1000 Mbps throughput, no bandwidth bottleneck Auto-determines necessary power requirements for connected devices Plug-and-play — no configuration or software required Convenient wall-mounting bracket included for tidy, fixed installations Compact and lightweight — easy to deploy in tight spaces Use Cases Wireless Access Points: Power TP-Link passive PoE access points mounted on ceilings or walls without running a separate power cable. IP Cameras: Supply power and data to compatible passive PoE cameras in locations without a nearby power outlet. Small Office & Home Networks: A cost-effective alternative to a full PoE switch when only one or two devices need to be powered via PoE. Retrofit Installations: Add PoE power to an existing Ethernet run without replacing the switch or adding new cabling. Specifications Specification Detail Model TL-POE4824G PoE Type 48V Passive PoE (non-802.3af/at) Data Speed Gigabit (1000 Mbps) Ports 1 × RJ45 IN (from router/switch) + 1 × RJ45 OUT (to PoE device) Mounting Wall-mountable (bracket included) Configuration Plug-and-play, no setup required Weight 0.38 kg Vendor TP-Link Frequently Asked Questions What is the difference between passive PoE and standard 802.3af/at PoE? Standard 802.3af/at PoE uses a negotiation process to detect and power compliant devices safely. Passive PoE applies voltage to the cable without negotiation — it is simpler and lower cost, but must only be used with devices specifically designed for passive PoE. Using a passive PoE injector with a non-compatible device may damage it. Which TP-Link devices are compatible with the TL-POE4824G? The TL-POE4824G is designed for TP-Link products that support 48V passive PoE. Check your device's specifications or the TP-Link compatibility list to confirm compatibility before use. Common compatible devices include select TP-Link Omada and EAP series access points. Can I use this with a non-TP-Link device? Only if the device explicitly supports 48V passive PoE input. Using this adapter with a device that does not support passive PoE may cause permanent damage. Always verify compatibility before connecting. Does it support Gigabit speeds? Yes. The TL-POE4824G supports full Gigabit (1000 Mbps) data throughput, so it will not create a bottleneck on Gigabit networks. Do I need a PoE switch to use this adapter? No. The TL-POE4824G connects between your standard (non-PoE) router or switch and the powered device. It draws power from its own power supply and injects it onto the Ethernet cable — your existing switch does not need to support PoE.

Read more less

Enterprise-Grade 24-Port PoE+ L2+ Managed Switch with 10G SFP+ Uplinks and Omada SDN The TP-Link TL-SG3428XMP is a JetStream L2+ fully managed switch that combines 24 Gigabit PoE+ ports, a 384W power budget, and four 10G SFP+ uplink slots in a rack-mountable 1U chassis. With 128Gbps non-blocking switching capacity, Omada SDN cloud management, Zero-Touch Provisioning, and a comprehensive security and QoS feature set, it is purpose-built for large-scale CCTV deployments, enterprise Wi-Fi networks, and multi-site business infrastructure across Australia where performance, control, and scalability are non-negotiable. Key Features 24× Gigabit PoE+ Ports (802.3at/af): Power and connect IP cameras, wireless access points, VoIP phones, and other PoE/PoE+ devices at up to 30W per port across all 24 ports simultaneously. 384W Total PoE Budget: One of the highest PoE budgets in its class — supports large mixed deployments of PoE and PoE+ devices with significant headroom. 4× 10G SFP+ Uplink Slots: 10 Gigabit fibre or DAC uplinks to core switches, providing high-bandwidth, low-latency backbone connectivity for video-heavy networks. 128 Gbps Switching Capacity: Fully non-blocking switching fabric handles simultaneous 10G uplinks and 24-port Gigabit PoE+ traffic without bottlenecks. Omada SDN Integration: Centrally manage alongside Omada access points and routers via cloud or local controller — with Zero-Touch Provisioning (ZTP) for rapid remote deployment across multiple sites. L2+ Managed with Static Routing: Routes inter-VLAN traffic without a dedicated router, improving efficiency in segmented networks. Full L2 feature set including STP, RSTP, MSTP, Link Aggregation, and port mirroring. L2/L3/L4 QoS with 8 Priority Queues: Advanced traffic prioritisation with SP, WRR, and SP+WRR scheduling — ensures smooth, uninterrupted IP camera feeds, VoIP calls, and IPTV streams under heavy load. IGMP Snooping: Optimises multicast traffic for IP camera streams and IPTV, reducing unnecessary bandwidth consumption across the network. Robust Security Suite: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication protect against unauthorised access and network attacks. 802.1Q VLAN: Segment camera traffic, staff devices, guest networks, and IoT devices onto separate logical networks for improved security and performance. Standalone Management: Web UI, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image support for enterprise-grade standalone management without Omada. Rack Mountable (1U): Standard 19-inch rack form factor (440 × 330 × 44mm) for professional installations in comms cabinets and server rooms. Common Use Cases Large-scale IP CCTV systems with 24 cameras and 10G NVR uplinks Enterprise Wi-Fi deployments with multiple Omada access points managed centrally Multi-site business networks managed via Omada cloud with ZTP for remote deployment High-density VoIP phone networks for medium to large businesses Distribution or aggregation switch in multi-floor or multi-building network architectures Networks requiring inter-VLAN routing without a dedicated Layer 3 router Technical Specifications Model TL-SG3428XMP RJ45 Ports 24× 10/100/1000Mbps (all PoE+) SFP+ Uplink Slots 4× 10G SFP+ Console Ports 1× RJ45, 1× Micro-USB PoE Standard IEEE 802.3at (PoE+) / 802.3af (PoE) Total PoE Budget 384W Switching Capacity 128 Gbps Packet Forwarding Rate 95.23 Mpps MAC Address Table 16K Jumbo Frame 9KB QoS L2/L3/L4, 8 priority queues, SP/WRR/SP+WRR, 802.1p CoS/DSCP IGMP Snooping Yes VLAN 802.1Q VLAN, Voice VLAN, Private VLAN, Protocol VLAN Static Routing Yes (L2+ inter-VLAN routing) Security IP-MAC-Port Binding, ACL, DoS Defence, DHCP Snooping, 802.1X, RADIUS SDN Management Omada SDN (cloud & local controller) Zero-Touch Provisioning Yes (ZTP via Omada) Standalone Management Web UI, CLI (Telnet/SSH/Console), SNMP, RMON, Dual Image Spanning Tree STP, RSTP, MSTP Link Aggregation Yes (802.3ad LACP) Fans 2× (active cooling) Mounting Rack mountable (19″, 1U) Dimensions (W × D × H) 440 × 330 × 44mm Power Supply 100–240V AC, 50/60Hz (internal) Max Power Consumption 34.4W (no PD) / 465.8W (full PoE load) Frequently Asked Questions What is the difference between the TL-SG3428XMP and the TL-SG2428P? The TL-SG3428XMP is a full L2+ managed switch with 10G SFP+ uplinks, a 384W PoE budget, 128Gbps switching capacity, CLI management (SSH/Telnet/Console), SNMP, RMON, Link Aggregation, and advanced QoS with 8 priority queues. The TL-SG2428P is a smart managed switch with Gigabit SFP uplinks, a 250W budget, and a simpler web-only management interface. Choose the TL-SG3428XMP for enterprise deployments requiring 10G uplinks, CLI access, and advanced L2+ features. What is Omada SDN and do I need a controller? Omada SDN is TP-Link's centralised network management platform. The TL-SG3428XMP can be managed via the Omada cloud (no hardware controller required), a hardware Omada controller (OC300/OC200), or a software controller on a local server. For standalone deployments, it can also be managed independently via web UI, CLI, or SNMP without any Omada controller. What are the 10G SFP+ slots used for? The four 10G SFP+ slots accept 10G SFP+ transceivers (e.g. TL-SM5110-LR for fibre) or 10G DAC cables (e.g. TL-SM5220-1M) for high-bandwidth uplink connections to a core switch, NVR, or server. 10G uplinks are essential in large CCTV deployments where multiple 4K or 8MP camera streams are aggregated to a single NVR. How many PoE cameras can I connect? Up to 24 IP cameras can be connected via the PoE+ ports. With a 384W budget, the switch comfortably supports 24 cameras drawing up to 16W each (384W total). For higher-power PTZ or PoE+ cameras, calculate your total load to stay within the 384W budget. Does it support inter-VLAN routing without a separate router? Yes. The TL-SG3428XMP supports static routing (L2+), allowing it to route traffic between VLANs internally — eliminating the need for a dedicated Layer 3 router in many deployments. This is useful for separating camera traffic, staff devices, and guest networks while still allowing controlled inter-VLAN communication. Can I manage it via command line (CLI)? Yes. The TL-SG3428XMP supports CLI management via the RJ45 console port, Micro-USB console port, Telnet, and SSH — providing enterprise-grade command-line access for advanced configuration, scripting, and troubleshooting. It also supports SNMP v1/v2c/v3 and RMON for integration with network management systems.

Read more less

Power and Connect Remote IP Cameras Over a Single Fibre Strand up to 20km The TP-Link TL-FC111PB-20 is a WDM (Wavelength Division Multiplexing) BiDi media converter that bridges 10/100Mbps copper Ethernet and single-mode fibre over a single fibre strand — up to 20km. With a built-in 802.3af PoE output port, it can power an IP camera or other PoE device directly at the remote end of the fibre link, eliminating the need for a separate power source at the camera location. Ideal for long-distance CCTV deployments, inter-building links, and remote surveillance installations across Australia. Important: The TL-FC111PB-20 (TX 1310nm / RX 1550nm) must be paired with a complementary TL-FC111PA-20 (TX 1550nm / RX 1310nm) at the opposite end of the fibre link. Two units of the same type will not establish a connection. Key Features 802.3af PoE Output (RJ45 Port): Powers an IP camera, wireless access point, or other 802.3af-compliant device directly at the remote end — no separate power outlet or PoE injector required at the camera location. WDM BiDi Single-Fibre Operation: Transmits and receives over a single strand of single-mode fibre using TX 1310nm and RX 1550nm wavelengths — halving fibre infrastructure costs compared to dual-fibre media converters. 20km Maximum Fibre Range: Extends your network over single-mode fibre up to 20km — ideal for inter-building links, remote camera locations, and campus-wide surveillance networks. SC Simplex Fibre Connector: Standard SC simplex interface compatible with widely available single-mode fibre patch leads and infrastructure. 10/100Mbps Auto-Negotiation RJ45 Port: Connects to any standard Fast Ethernet switch, NVR, or network device via Cat5 or above copper Ethernet cable up to 100m. Half/Full-Duplex Auto-Negotiation: Automatically negotiates the optimal duplex mode with connected devices for reliable, error-free data transfer. Wide Operating Temperature (0–50°C): Suitable for comms cabinets and equipment rooms without dedicated air conditioning. LED Status Indicators: PWR, Link/Act, and PoE LEDs for quick visual status monitoring during installation and troubleshooting. Common Use Cases Powering and connecting a remote IP camera over a single fibre strand up to 20km — no power outlet needed at the camera end Inter-building CCTV links where copper Ethernet distance limits (100m) are exceeded Remote surveillance installations on large properties, farms, and industrial sites Extending a network to a remote building or outbuilding using existing single-mode fibre infrastructure Replacing dual-fibre media converters to halve fibre usage in conduit-constrained environments Technical Specifications Model TL-FC111PB-20 RJ45 Port 1× 10/100Mbps (802.3af PoE output) Fibre Port 1× 100Mbps SC Simplex Fibre Type 9/125μm Single-Mode (SMF) Max Fibre Distance 20km TX Wavelength 1310nm RX Wavelength 1550nm WDM / BiDi Yes (single-strand operation) PoE Standard IEEE 802.3af (output on RJ45 port) Required Pair Unit TL-FC111PA-20 (TX 1550nm / RX 1310nm) Copper Cable Cat5 or above, up to 100m Standards IEEE 802.3, 802.3i, 802.3u Power Supply 48V DC / 0.5A (external adapter) LED Indicators PWR, Link/Act, PoE Dimensions (W × D × H) 94.5 × 73.0 × 27.0mm Operating Temperature 0°C to 50°C Storage Temperature -40°C to 70°C Operating Humidity 10–90% RH (non-condensing) Frequently Asked Questions What unit do I need at the other end of the fibre link? The TL-FC111PB-20 (TX 1310nm / RX 1550nm) must be paired with a TL-FC111PA-20 (TX 1550nm / RX 1310nm) at the opposite end. Using two TL-FC111PB-20 units on the same link will not work — the wavelengths must be complementary. Does the PoE output power the remote camera or the local switch? The 802.3af PoE output is on the RJ45 port of the TL-FC111PB-20. This means the unit at the remote end (near the camera) provides PoE power to the connected IP camera or device. The unit at the local end (near the switch) connects to a standard non-PoE switch port via copper Ethernet. What fibre cable is required? The TL-FC111PB-20 requires 9/125μm single-mode fibre with an SC simplex connector. It is not compatible with multi-mode fibre (OM1, OM2, OM3, OM4) or SC duplex patch leads. Ensure your fibre infrastructure is single-mode before purchasing. Can I use this to connect a camera more than 100m away without running power? Yes — this is the primary use case. Place the TL-FC111PA-20 at the switch end (connected to your NVR or switch via copper Ethernet), run a single-mode fibre strand to the camera location, and connect the TL-FC111PB-20 at the camera end. The TL-FC111PB-20 will power the camera via its PoE RJ45 port — no power outlet needed at the camera location. What is the maximum PoE power output? The TL-FC111PB-20 provides 802.3af PoE output, which delivers up to 15.4W to the connected device. This is sufficient for most standard IP cameras and compact wireless access points. For devices requiring more than 15.4W (802.3at PoE+), a different solution is required. Is this suitable for outdoor camera installations? The media converter itself is rated for indoor use (0–50°C) and should be installed in a weatherproof enclosure or indoor location. The connected IP camera can be outdoor-rated. For the fibre run, use outdoor-rated single-mode fibre cable appropriate for your installation environment.

Read more less

TP-Link TL-FC111A-20 10/100 Mbps WDM Media Converter• Complies with 802.3u 10/100Base-TX, 100Base-FX standards• Auto-negotiation of Half-Duplex/Full-Duplex transfer mode• Adopts WDM technology, transmitting and receiving data on one single fibre• Extends fibre distance up to 20kmWhat This Product DoesTL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength and receives data at 1310nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111A-20 should send data at a wavelength of 1310nm and receive data at a wavelength of 1550nm. TP-Link another media converter TL-FC111B-20 is one of the products that can cooperate with TL-FC111A-20.Other FeaturesBesides, this media converter can be used as a standalone device (no rack required) or used with TP-Link’s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

Read more less

JetStream 16-Port Gigabit Smart Switch with 2 SFP Slots, Support Omada SDN, L2/L3/L4 QoS, Static Routing,Rack MountableFull Gigabit Ports: 16× gigabit RJ45 ports and 2× gigabit SFP Slots provide high-speed connections.Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring.Centralised Management: Cloud access and Omada app for ultra convenience and easy management.Static Routing: Helps route internal traffic for more efficient use of network resources.Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.Standalone Management: Web, CLI (Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilitiesHARDWARE FEATURESInterface • 16× 10/100/1000 Mbps RJ45 Ports• 2× Gigabit SFP SlotsFan Quantity FanlessPower Supply 100-240 V AC~50/60 HzDimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm)Mounting Rack MountableMax Power Consumption 12.3 W (220 V/50 Hz)Max Heat Dissipation 41.97 BTU/hrPERFORMANCESwitching Capacity 36 GbpsPacket Forwarding Rate 26.8 MppsMAC Address Table 8KJumbo Frame 9 KB

Read more less

Enterprise-Grade 24-Port PoE+ Management for CCTV, VoIP, and Business NetworksThe TP-Link TL-SG3428MP is a JetStream 28-port Gigabit L2+ managed switch built for demanding commercial and enterprise network installations. With 24 IEEE 802.3at/af PoE+ ports and a generous 384W PoE budget, it can simultaneously power IP cameras, VoIP phones, wireless access points, and access control devices — all managed centrally via the Omada SDN platform or standalone web interface.Key Features 24× Gigabit PoE+ Ports (802.3at/af) — up to 30W per port, 384W total PoE budget for powering IP cameras, APs, and VoIP phones 4× Gigabit SFP Uplink Slots — fibre or copper uplinks for high-speed backbone connectivity 56 Gbps Switching Capacity — non-blocking performance for high-density network environments L2+ Features with Static Routing — inter-VLAN routing without a dedicated router for simplified network design Omada SDN Integration — Zero-Touch Provisioning, centralised cloud management, and intelligent monitoring Robust Security — IP-MAC-Port Binding, ACL, Port Security, DoS defence, DHCP Snooping, 802.1X, RADIUS authentication L2/L3/L4 QoS — 8 priority queues with 802.1p CoS/DSCP for voice and video traffic prioritisation IGMP Snooping — optimises multicast traffic for IP camera and IPTV deployments Link Aggregation (LACP 802.3ad) — up to 8 aggregation groups for increased uplink bandwidth and redundancy Rack-Mountable, Dual Fan — 1U rack design with active cooling for 24/7 operation 5-Year Warranty Typical Use Cases Centralised PoE switching for large IP CCTV installations (16–24 cameras) Enterprise Wi-Fi deployments powering multiple Omada or third-party access points VoIP phone systems in commercial offices and call centres Access control and intercom systems requiring PoE and VLAN segmentation Multi-VLAN network segmentation for guest, staff, IoT, and security traffic Aggregation switch in multi-floor or multi-building network topologies Technical Specifications Specification Detail Model TL-SG3428MP RJ45 Ports 24× 10/100/1000Mbps PoE+ (802.3at/af) SFP Slots 4× Gigabit SFP Total Ports 28 PoE Standard IEEE 802.3at/af PoE Budget 384W total / 30W per port Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9KB Routing Static Routing (L2+) QoS L2/L3/L4, 8 priority queues, 802.1p CoS/DSCP Management Web UI, CLI, SNMP, RMON, Omada SDN, Omada App Power Supply 100–240V AC Fans 2 Form Factor 1U Rack-Mountable Certifications FCC, CE, RoHS Warranty 5 Years Frequently Asked Questions How many IP cameras can the TL-SG3428MP power simultaneously? With a 384W PoE budget and 24 PoE+ ports, it can power up to 24 cameras. Actual capacity depends on each camera's power draw — for example, 24 cameras at 15W each would use 360W, comfortably within budget. High-power PTZ cameras drawing 25–30W will reduce the total count accordingly. Does this switch require an Omada controller? No. The TL-SG3428MP can be managed as a standalone switch via its web interface, CLI, or SNMP. An Omada controller (software, cloud, or hardware) is optional and enables centralised multi-device management across sites. What is static routing and why is it useful? Static routing (L2+) allows the switch to route traffic between VLANs without a dedicated router. This simplifies network design in installations where you need to segment traffic — for example, separating CCTV, staff, and guest networks — while keeping inter-VLAN communication possible. Can I use fibre uplinks with this switch? Yes. The 4× Gigabit SFP slots support both fibre (via SFP transceivers) and copper (via SFP-to-RJ45 modules) uplinks, making it suitable for long-distance backbone connections between floors or buildings. Is the TL-SG3428MP suitable for 24/7 operation? Yes. It features a rack-mountable 1U chassis with dual active cooling fans, designed for continuous operation in network cabinets and server rooms.

Read more less

TP-Link TL-SG3428X-M2 JetStream 24-Port 2.5G L2+ Managed Switch with 4-Port 10GE SFP+ The TP-Link TL-SG3428X-M2 is a professional 24-port 2.5GBASE-T L2+ managed switch designed for enterprise, campus, and high-density Wi-Fi 6/6E deployments across Australia. With 24 × 2.5G multi-gigabit RJ45 ports, four 10GE SFP+ uplink slots, full Omada SDN integration, and a comprehensive L2+ feature set, it provides the multi-gigabit access layer switching required to eliminate the 1Gbps bottleneck between Wi-Fi 6 access points and the core network — without the cost of a full 10GE access switch. Key Features 24 × 2.5GBASE-T RJ45 Ports — Multi-gigabit 2.5G access ports with backward compatibility for 10/100/1000Mbps devices — ideal for connecting Wi-Fi 6 APs that aggregate more than 1Gbps of wireless throughput per radio. 4 × 10GE SFP+ Uplink Slots — Non-blocking 10G fibre or DAC uplinks to core switches and servers for maximum throughput under full load. L2+ Feature Set — Comprehensive L2 and L2+ features including Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP Link Aggregation, Port Mirroring, IGMP Snooping, and Loopback Detection. Enterprise QoS — Prioritise voice, video, and critical traffic by IP address, MAC address, TCP/UDP port, and VLAN ID for consistent performance across all 24 ports under load. Robust Security — IP-MAC-Port-VID Binding, 802.1X authentication (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, Port Security, Storm Control, and DoS prevention. Omada SDN Integration — Centrally manage the switch alongside Omada APs and routers from the Omada Controller, cloud portal, or Omada app for 100% centralised network management. Standalone Management — Web UI (GUI), CLI (Console, Telnet, SSH), SNMP (v1/v2c/v3), RMON, and Dual Image/Dual Configuration for full enterprise-grade standalone management. ISP Features — 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP authentication, and DLDP for service provider and carrier-grade deployments. Cable Diagnostics — Built-in cable diagnostic tool for troubleshooting Ethernet cable faults without additional test equipment. IPv6 Ready — Full IPv6 support including Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery. Use Cases Enterprise and campus networks requiring 2.5G access layer switching to eliminate the 1Gbps bottleneck for Wi-Fi 6 and Wi-Fi 6E access points High-density Wi-Fi 6 deployments in hotels, conference centres, and education facilities where each AP aggregates more than 1Gbps of wireless client throughput Omada SDN deployments requiring a multi-gigabit managed access switch integrated into centralised cloud management Server room and data centre edge switching requiring 2.5G access ports and 10GE SFP+ uplinks for NAS, servers, and workstations ISP and service provider aggregation networks requiring QinQ, sFlow, OAM, and DDM features at the access layer Network upgrades from Gigabit to multi-gigabit infrastructure using existing Cat5e/Cat6 cabling — 2.5GBASE-T runs at full speed on Cat5e up to 100 metres Technical Specifications Specification Detail Model TL-SG3428X-M2 RJ45 Ports 24 × 2.5GBASE-T (10/100/1000/2500Mbps) SFP+ Uplinks 4 × 10GE SFP+ Switch Type L2+ Managed (JetStream) L2+ Features Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, Loopback Detection, Cable Diagnostics Security 802.1X (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, IP-MAC-Port-VID Binding, Storm Control, DoS Prevention Management Web UI, CLI (Console/Telnet/SSH), SNMP v1/v2c/v3, RMON, Dual Image, Dual Config; Omada SDN (cloud & on-premises) ISP Features 802.3ah OAM, DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Auth, DLDP IPv6 Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Form Factor 1U Rackmount (19-inch) Weight 3.0 kg Warranty 2 Years Recommended Accessories TP-Link EAP655-Wall AX3000 Wi-Fi 6 Wall Plate AP — Connect to the TL-SG3428X-M2’s 2.5G ports for full multi-gigabit backhaul to Wi-Fi 6 wall plate APs in hotel and office per-room deployments. TP-Link Deco X50-PoE AX3000 Wi-Fi 6 Mesh Node — Pair with the TL-SG3428X-M2 for 2.5G wired backhaul to ceiling-mounted Deco mesh nodes across a floor or building. TP-Link Omada ER7212PC 3-in-1 VPN Router — Pair as the core router and Omada controller in a complete Omada SDN deployment, with the TL-SG3428X-M2 as the 2.5G access layer switch. 10GE SFP+ DAC Cable or Fibre Module — For connecting the TL-SG3428X-M2 to a core switch or server via the SFP+ uplink slots at full 10G speed. Cat6 Ethernet Cable — Supports 2.5GBASE-T at full speed on Cat6 up to 100 metres; Cat5e also supports 2.5G up to 100 metres. Downloads TL-SG3428X-M2 Datasheet (PDF) Frequently Asked Questions Why do I need 2.5G switching for Wi-Fi 6 access points? Wi-Fi 6 access points can aggregate wireless throughput from multiple clients exceeding 1Gbps on a single AP. A standard 1G uplink port creates a bottleneck that limits the AP’s real-world performance. The TL-SG3428X-M2’s 2.5G ports eliminate this bottleneck at a lower cost than full 10GE access switching — making it the ideal mid-tier upgrade for high-density Wi-Fi 6 deployments. Does 2.5GBASE-T work on existing Cat5e and Cat6 cabling? Yes. 2.5GBASE-T is specifically designed to run at 2.5Gbps on existing Cat5e and Cat6 cabling up to 100 metres — the same distance as standard Gigabit Ethernet. This makes the TL-SG3428X-M2 an ideal upgrade path for buildings already cabled with Cat5e or Cat6, without requiring a full recabling project. Does the TL-SG3428X-M2 require an Omada Controller? No. The TL-SG3428X-M2 supports full standalone management via web UI, CLI (Console, Telnet, SSH), SNMP, and RMON without any controller. Omada SDN integration is optional and adds centralised multi-device management, cloud access, and the Omada app interface — recommended for large deployments with multiple switches and APs. What is the difference between the TL-SG3428X-M2 and the TL-SG3452XP? The TL-SG3428X-M2 provides 24 × 2.5G multi-gigabit access ports without PoE, making it suited for environments where PoE is not required or where PoE is handled by a separate switch. The TL-SG3452XP provides 48 × Gigabit PoE+ ports with a 500W budget, suited for large-scale PoE device deployments. Choose the TL-SG3428X-M2 when multi-gigabit speed per port is the priority; choose the TL-SG3452XP when PoE port count and budget are the priority. What SFP+ modules or cables are compatible with the uplink slots? The four SFP+ slots support standard 10GE SFP+ modules including TP-Link’s own SFP+ transceivers (single-mode and multi-mode fibre) and DAC (Direct Attach Copper) cables. Check TP-Link’s compatibility list for third-party SFP+ module support.

Read more less

TP-Link TL-POE10R Gigabit PoE Splitter Power your network devices without running a separate power cable. The TP-Link TL-POE10R is an IEEE 802.3af-compliant PoE splitter that separates power and data from a single Ethernet cable, delivering clean DC power (12V, 9V, or 5V) to devices that don't have built-in PoE support — all at Gigabit speeds over distances up to 100 metres. Key Features IEEE 802.3af compliant — works with any 802.3af-standard PoE switch or injector Gigabit support — 2 x 10/100/1000Mbps RJ45 ports with Auto-Negotiation and Auto MDI/MDIX Selectable DC output — choose 12V, 9V, or 5V to match your device's power requirement Delivers power and data over a single Cat5/5e/6 cable up to 100 metres Plug-and-play — no configuration or software required PWR LED indicator for quick status confirmation Compact form factor: 80.8 × 54 × 24 mm Use Cases Powering IP cameras, access points, or VoIP phones that lack built-in PoE CCTV and security installations where running separate power cabling is impractical Retail, hospitality, and office deployments requiring tidy, single-cable runs Pairing with a PoE switch to power Raspberry Pi or IoT devices via Ethernet Specifications Specification Detail Model TL-POE10R PoE Standard IEEE 802.3af Data Ports 2 × 10/100/1000Mbps RJ45 Auto-Negotiation / MDI/MDIX Yes Power Output Port 1 × DC output DC Output Options 12V 1A / 9V 1A / 5V 2A (selectable) Max Cable Distance 100 metres Supported Cable Cat3/4/5 (10M), Cat5/5e (100M), Cat5/5e/6 (1000M) LED Indicator PWR Dimensions (W × D × H) 80.8 × 54 × 24 mm Weight 200 g SKU TL-POE10R Vendor TP-Link Recommended Accessories TP-Link TL-POE150S PoE Injector — add PoE to any standard Ethernet port TP-Link TL-SG1005P 5-Port Gigabit PoE Switch — power multiple devices from one switch Cat6 Ethernet patch cables for optimal Gigabit performance Frequently Asked Questions What is a PoE splitter and how does it work? A PoE splitter receives a combined power and data signal from a PoE-enabled switch or injector over a single Ethernet cable. It then splits that signal, passing data through to your device's Ethernet port and converting the power to a standard DC output (12V, 9V, or 5V) for the device's power input. Do I need a PoE switch to use the TL-POE10R? Yes. The TL-POE10R is a passive splitter — it requires a PoE power source such as an IEEE 802.3af-compliant PoE switch or a PoE injector (such as the TP-Link TL-POE150S) to function. Which voltage output should I select? Match the output voltage to your device's power requirement. Common selections are 12V for IP cameras and access points, 9V for some routers, and 5V for USB-powered devices and Raspberry Pi. Always check your device's power label before selecting. Is the TL-POE10R compatible with 802.3at (PoE+) switches? The TL-POE10R is rated for IEEE 802.3af. It will work with 802.3at (PoE+) switches in backward-compatible mode, but will only draw up to 802.3af power levels (max 15.4W at the source). Does CCTV Guru ship Australia-wide? Yes. We ship to all states and territories across Australia. Orders are dispatched promptly from our local warehouse.

Read more less

Low-Cost 10Gbps Switch-to-Switch Connectivity Without SFP Modules The TP-Link TL-SM5220-1M is a 1-metre 10G SFP+ Direct Attach Copper (DAC) cable that provides a simple, cost-effective alternative to separate SFP+ transceivers and fibre patch leads for short-distance 10 Gigabit connections. With SFP+ connectors on both ends, it plugs directly into any compatible 10G SFP+ port — delivering full 10Gbps throughput with lower latency and lower cost than optical solutions. Ideal for top-of-rack switch stacking, server-to-switch connections, and NVR uplinks in data centres and comms cabinets across Australia. Key Features 10Gbps Data Rate: Full 10 Gigabit Ethernet throughput for high-bandwidth switch-to-switch and server-to-switch connections. SFP+ Connectors on Both Ends: Plugs directly into any 10G SFP+ port — no separate transceiver modules or fibre patch leads required. 1 Metre Cable Length: Ideal for short in-rack or adjacent-rack connections where devices are in close proximity. Direct Attach Copper (DAC): Passive copper cable design delivers lower latency and lower power consumption compared to active optical solutions. Cost-Effective Alternative to Fibre: Eliminates the need to purchase two SFP+ transceivers plus a fibre patch lead for short-distance 10G links. Replaces TXC432-CU1M: Direct replacement for the legacy TP-Link TXC432-CU1M DAC cable. Wide Temperature Range: Rated for operating temperatures from 0°C to 70°C — suitable for comms cabinets and server rooms. Common Use Cases Stacking or uplink connections between adjacent 10G switches in a comms rack Server-to-switch 10G connections in small data centres and server rooms NVR-to-switch 10G uplinks in high-camera-count CCTV installations Cost-effective alternative to SFP+ transceivers + fibre for in-rack connections Connecting TP-Link JetStream 10G switches (e.g. TL-SG3428X, TL-SG3452X) within the same rack Technical Specifications Model TL-SM5220-1M Cable Type Direct Attach Copper (DAC), Passive Connector Type SFP+ on both ends Data Rate 10 Gbps Cable Length 1 metre Operating Temperature 0°C to 70°C Storage Temperature -40°C to 80°C Operating Humidity 10–90% RH (non-condensing) Storage Humidity 5–90% RH (non-condensing) Replaces TXC432-CU1M Frequently Asked Questions What is a Direct Attach Cable (DAC) and how is it different from a fibre SFP+ connection? A Direct Attach Cable (DAC) is a fixed copper cable with SFP+ connectors permanently attached to both ends. Unlike a fibre SFP+ connection — which requires two separate transceiver modules plus a fibre patch lead — a DAC cable is a single, self-contained unit. DAC cables are cheaper, consume less power, and have lower latency than optical solutions, but are limited to short distances (typically 1–7 metres for passive DAC). Will this cable work with non-TP-Link switches? The TL-SM5220-1M uses standard SFP+ connectors and is designed to work with any switch that has a 10G SFP+ port. However, some switch vendors (notably Cisco and certain enterprise brands) may restrict compatibility to vendor-coded cables. Always verify compatibility with your specific switch model before purchasing. What is the maximum cable length for this DAC? This cable is 1 metre in length. TP-Link also offers longer DAC cables in the TL-SM5220 range (3m and 5m variants) for connections between adjacent racks or slightly further distances. For distances beyond 7 metres, an active optical SFP+ solution such as the TL-SM5110-LR is recommended. Does it require any configuration or drivers? No. DAC cables are passive devices — simply plug both ends into compatible SFP+ ports and the 10G link will establish automatically. No drivers, software, or configuration are required. Is this cable suitable for CCTV installations? Yes. For high-camera-count CCTV installations where an NVR needs a 10G uplink to a core switch within the same rack or cabinet, the TL-SM5220-1M provides a clean, low-cost 10G connection without the need for separate transceivers or fibre infrastructure. What TP-Link switches is this compatible with? The TL-SM5220-1M is compatible with TP-Link JetStream switches featuring 10G SFP+ ports, including the TL-SG3428X, TL-SG3428XMP, TL-SG3452X, and TL-SG3428XF. It is also compatible with most third-party switches with standard 10G SFP+ ports.

Read more less

TP-Link TL-SG3452XP JetStream 48-Port Gigabit PoE+ L2+ Managed Switch with 4-Port 10GE SFP+ The TP-Link TL-SG3452XP is a professional 48-port Gigabit PoE+ L2+ managed switch designed for enterprise, campus, and large commercial deployments across Australia. With 48 × IEEE 802.3af/at PoE+ Gigabit ports delivering a 500W total power budget, four 10GE SFP+ uplink slots for non-blocking high-speed connectivity to core switches and servers, and full Omada SDN integration, it provides the scale, power, and management capability required for large-scale Wi-Fi, IP camera, and VoIP deployments from a single 1U rackmount appliance. Key Features 48 × Gigabit PoE+ Ports — IEEE 802.3af/at PoE+ on all 48 RJ45 ports with a 500W total power budget — powers access points, IP cameras, VoIP phones, and other PoE devices at scale without separate power infrastructure. 4 × 10GE SFP+ Uplink Slots — Non-blocking 10G fibre or DAC uplinks to core switches and servers for ultra-low latency and maximum throughput under full load. L2+ Feature Set — Comprehensive L2 and L2+ features including Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP Link Aggregation, Port Mirroring, and IGMP Snooping. Enterprise QoS — Prioritise voice, video, and critical traffic by IP address, MAC address, TCP/UDP port, and VLAN ID for consistent performance across all 48 ports under load. Robust Security — IP-MAC-Port-VID Binding, 802.1X authentication (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, Port Security, Storm Control, and DoS prevention. Omada SDN Integration — Centrally manage the switch alongside Omada APs and routers from the Omada Controller, cloud portal, or Omada app for 100% centralised network management. Standalone Management — Web UI, CLI (Console, Telnet, SSH), SNMP, RMON, and Dual Image for full enterprise-grade standalone management without a controller. ISP Features — sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP authentication, 802.3ah OAM, and DLDP for service provider and carrier-grade deployments. IPv6 Ready — Full IPv6 support including Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, and IPv6 Neighbour Discovery. 1U Rackmount Form Factor — Standard 19-inch 1U rack design for clean data centre and comms room installation. Use Cases Large enterprise and campus networks requiring a single 48-port PoE+ access layer switch for Wi-Fi 6 APs, IP cameras, and VoIP phones Hotels, resorts, and conference centres deploying per-room or per-floor Wi-Fi 6 access points at scale from a centralised switch Education facilities — schools, TAFEs, and universities — requiring high-density PoE switching for classroom APs and IP cameras Healthcare facilities and aged care campuses needing reliable PoE switching for nurse call, VoIP, and wireless infrastructure Omada SDN deployments requiring a large-scale managed PoE+ access switch integrated into centralised cloud management ISP and service provider aggregation networks requiring QinQ, sFlow, and OAM features at the access layer Technical Specifications Specification Detail Model TL-SG3452XP RJ45 Ports 48 × 10/100/1000Mbps Gigabit PoE+ SFP+ Uplinks 4 × 10GE SFP+ PoE Standard IEEE 802.3af (PoE) / 802.3at (PoE+) Total PoE Budget 500W Switch Type L2+ Managed (JetStream) L2+ Features Static Routing, 802.1Q VLAN, RSTP/MSTP, LACP, Port Mirroring, IGMP Snooping, QoS Security 802.1X (RADIUS/TACACS+), ACL (L2–L4), DHCP Snooping, IP-MAC-Port-VID Binding, Storm Control, DoS Prevention Management Web UI, CLI (Console/Telnet/SSH), SNMP, RMON, Dual Image; Omada SDN (cloud & on-premises) ISP Features sFlow, QinQ, L2PT, PPPoE ID Insertion, IGMP Auth, 802.3ah OAM, DLDP IPv6 Dual Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 ND Form Factor 1U Rackmount (19-inch) Weight 6.48 kg Warranty 2 Years Recommended Accessories TP-Link Omada ER7212PC 3-in-1 VPN Router — Pair as the core router and Omada controller in a complete Omada SDN deployment, with the TL-SG3452XP as the access layer switch. TP-Link EAP655-Wall AX3000 Wi-Fi 6 Wall Plate AP — Connect up to 48 wall plate APs directly to the TL-SG3452XP’s PoE+ ports for large-scale per-room hotel or office Wi-Fi 6 deployments. 10GE SFP+ DAC Cable or Fibre Module — For connecting the TL-SG3452XP to a core switch or server via the SFP+ uplink slots at full 10G speed. Cat6 Ethernet Cable — For reliable Gigabit and PoE+ delivery to all 48 connected devices; Cat6A recommended for runs over 55m. TP-Link VIGI C440 4MP Full-Colour Turret Camera — Connect PoE-powered VIGI cameras directly to the TL-SG3452XP’s PoE+ ports for large-scale IP surveillance deployments. Downloads TL-SG3452XP Datasheet (PDF) Frequently Asked Questions How many PoE devices can the TL-SG3452XP power simultaneously? All 48 RJ45 ports support PoE+, but the combined power draw of all connected PoE devices must not exceed the 500W total budget. For example, 48 × 10W PoE cameras would draw 480W — within budget. 48 × 15W Wi-Fi 6 APs would draw 720W — exceeding the budget. Plan your PoE device power requirements carefully and prioritise higher-wattage devices across ports if needed. What is the maximum PoE wattage per port? Each port supports up to 30W (IEEE 802.3at PoE+). The total across all 48 ports is capped at 500W. If you need more than 30W per port for high-power devices such as Wi-Fi 6E APs or PTZ cameras, consider the TL-SX3206HPP which supports up to 60W per port (IEEE 802.3bt PoE++). Does the TL-SG3452XP require an Omada Controller? No. The TL-SG3452XP supports full standalone management via web UI, CLI (Console, Telnet, SSH), SNMP, and RMON without any controller. Omada SDN integration is optional and adds centralised multi-device management, cloud access, and the Omada app interface — recommended for large deployments with multiple switches and APs. What SFP+ modules or cables are compatible with the uplink slots? The four SFP+ slots support standard 10GE SFP+ modules including TP-Link’s own SFP+ transceivers (single-mode and multi-mode fibre) and DAC (Direct Attach Copper) cables. Check TP-Link’s compatibility list for third-party SFP+ module support. Can this switch be used as a standalone access layer switch without a core switch? Yes. The TL-SG3452XP can operate as a standalone access layer switch connected directly to a router or modem via one of its SFP+ uplink ports. The Static Routing feature allows basic inter-VLAN routing without a dedicated Layer 3 core switch, making it suitable for medium-sized deployments that don’t require a full three-tier network architecture. Is the TL-SG3452XP suitable for outdoor IP camera deployments? The switch itself is designed for indoor rack installation. It can power outdoor-rated PoE IP cameras via indoor-to-outdoor cabling runs of up to 100 metres. Ensure the cable is rated for outdoor use and the camera carries an appropriate IP weather rating for its installation location.

Read more less

Upgrade Your Desktop to 10 Gigabit Wired NetworkingThe TP-Link TX401 is a 10GBase-T PCI Express network adapter that upgrades your desktop PC or workstation to 10 Gigabit wired networking — delivering speeds up to 10× faster than standard Gigabit adapters. Using standard Cat6A Ethernet cable (included), it connects to any 10GbE switch or NAS device for ultra-fast local data transfers, NVR streaming, and high-bandwidth applications. Backwards compatible with 1Gbps and 100Mbps networks, and includes both standard and low-profile brackets for flexible installation.Key Features 10Gbps 10GBase-T Networking — up to 10× faster than standard Gigabit adapters for local data transfers and high-bandwidth applications Backwards Compatible — auto-negotiates between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps for compatibility with existing network infrastructure 1.5m CAT6A Ethernet Cable Included — rated for 10Gbps; required for full 10GbE performance (standard Cat5e/Cat6 cables are limited to 1Gbps) Low-Profile and Full-Height Brackets — both brackets included for compatibility with standard ATX and mini tower PC cases PCI Express Interface — installs into any available PCIe x4 or x8 slot on a desktop motherboard Broad OS Support — compatible with Windows 10/8.1/8/7, Windows Server 2019/2016/2012 R2, and Linux 3-Year Warranty Typical Use Cases Connecting a desktop workstation to a 10GbE NAS for fast file transfers and media editing High-speed local network connections for video surveillance servers and NVR workstations Upgrading a home lab or server to 10 Gigabit networking Connecting to a 10GbE switch for multi-gigabit LAN performance Replacing a failed or slow onboard NIC with a dedicated 10GbE adapter Technical Specifications Specification Detail Model TX401 Interface PCI Express (PCIe x4) Network Standard 10GBase-T (IEEE 802.3an) Network Port 1× RJ45 Supported Speeds 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, 100Mbps Cable Requirement Cat6A (for 10Gbps); Cat5e/Cat6 (for 1Gbps) Included Cable 1.5m CAT6A Ethernet cable Brackets Included Full-height and low-profile OS Support Windows 10/8.1/8/7, Windows Server 2019/2016/2012 R2, Linux Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Do I need a special cable for 10Gbps speeds? Yes. To achieve 10Gbps speeds, you must use Cat6A (or Cat7/Cat8) Ethernet cable. Standard Cat5e and Cat6 cables are limited to 1Gbps at typical installation lengths. A 1.5m Cat6A cable is included in the box. Which PCIe slot does the TX401 require? The TX401 uses a PCIe x4 interface. It can be installed in any PCIe x4, x8, or x16 slot on your motherboard. It will not fit in a PCIe x1 slot. Is the TX401 compatible with my existing Gigabit network? Yes. The TX401 is backwards compatible and will auto-negotiate to 1Gbps (or 100Mbps) when connected to a standard Gigabit switch or router. You only need a 10GbE switch to take advantage of the full 10Gbps speed. Does the TX401 work with macOS? The TX401 officially supports Windows and Linux. macOS is not listed as a supported operating system. Check TP-Link’s support page for the latest driver availability before purchasing for Mac use. Can I use the TX401 to connect to a 10GbE NAS? Yes. This is one of the most common use cases. Connect the TX401 in your PC to a 10GbE NAS (or via a 10GbE switch) using Cat6A cable for dramatically faster file transfers compared to standard Gigabit connections.

Read more less

24-Port Gigabit L2 Managed Switch with 4 SFP Uplinks, Omada SDN and Fanless Design The TP-Link TL-SG3428 is a JetStream L2 fully managed switch that combines 24 Gigabit RJ45 ports and four Gigabit SFP uplink slots in a fanless, rack-mountable 1U chassis. With 56Gbps non-blocking switching capacity, Omada SDN cloud management, Zero-Touch Provisioning, static routing, and a comprehensive security and QoS feature set — all without a single fan — it's purpose-built for quiet, professional network deployments in offices, comms cabinets, and multi-site business infrastructure across Australia where silence and performance are equally important. Key Features 24× Gigabit RJ45 Ports: Full 10/100/1000Mbps auto-negotiation on all 24 ports for high-speed wired connectivity across all connected devices. 4× Gigabit SFP Uplink Slots: Connect to fibre backbone switches or extend your network over long distances using single-mode or multi-mode SFP modules. Fanless & Silent: Completely silent operation with no moving parts — ideal for open-plan offices, boardrooms, reception areas, and any environment where fan noise is unacceptable. 56 Gbps Non-Blocking Switching Capacity: Handles simultaneous full-speed traffic across all 24 ports without bottlenecks. Omada SDN Integration: Centrally manage alongside Omada routers and access points via cloud or local controller — with Zero-Touch Provisioning (ZTP) for rapid remote deployment across multiple sites. L2+ Static Routing: Routes inter-VLAN traffic without a dedicated router, improving efficiency in segmented networks. L2/L3/L4 QoS with 8 Priority Queues: Advanced traffic prioritisation with SP, WRR, and SP+WRR scheduling — ensures smooth IP camera feeds, VoIP calls, and video streams under heavy load. IGMP Snooping: Optimises multicast traffic for IP camera streams and IPTV, reducing unnecessary bandwidth consumption. Robust Security Suite: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication. 802.1Q VLAN: Segment camera traffic, staff devices, guest networks, and IoT devices onto separate logical networks. Standalone Management: Web UI, CLI (RJ45 Console, Micro-USB Console, Telnet, SSH), SNMP v1/v2c/v3, RMON, and Dual Image for enterprise-grade standalone management without Omada. 16K MAC Address Table: Supports large networks with many devices without address table overflow. Rack Mountable (1U): Standard 19-inch rack form factor (440 × 180 × 44mm) for professional installations in comms cabinets and server rooms. Common Use Cases Office networks requiring a silent, fanless managed switch in open-plan or client-facing environments CCTV and IP surveillance networks with VLAN segmentation and QoS for camera traffic Multi-site business networks managed centrally via Omada cloud with ZTP Distribution or access switch in multi-floor building networks with fibre SFP uplinks Networks requiring inter-VLAN routing without a dedicated Layer 3 router Boardrooms, reception areas, and quiet environments where fan noise is unacceptable Technical Specifications Model TL-SG3428 RJ45 Ports 24× 10/100/1000Mbps SFP Slots 4× Gigabit SFP Console Ports 1× RJ45, 1× Micro-USB Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 16K Jumbo Frame 9KB QoS L2/L3/L4, 8 priority queues, SP/WRR/SP+WRR, 802.1p CoS/DSCP IGMP Snooping Yes VLAN 802.1Q VLAN, Voice VLAN, Private VLAN, Protocol VLAN Static Routing Yes (L2+ inter-VLAN routing) Security IP-MAC-Port Binding, ACL, DoS Defence, DHCP Snooping, 802.1X, RADIUS SDN Management Omada SDN (cloud & local controller) Zero-Touch Provisioning Yes (ZTP via Omada) Standalone Management Web UI, CLI (Telnet/SSH/Console), SNMP v1/v2c/v3, RMON, Dual Image Spanning Tree STP, RSTP, MSTP Link Aggregation Yes (802.3ad LACP) Fan Fanless (silent) Max Power Consumption 19.9W Mounting Rack mountable (19″, 1U) Dimensions (W × D × H) 440 × 180 × 44mm Power Supply 100–240V AC, 50/60Hz (internal) Frequently Asked Questions What is the difference between the TL-SG3428 and the TL-SG3428XMP? The TL-SG3428 is a non-PoE L2 managed switch with Gigabit SFP uplinks, a fanless design, and a 19.9W power draw. The TL-SG3428XMP adds 24-port PoE+ (384W budget), four 10G SFP+ uplinks, and active cooling (fans). Choose the TL-SG3428 for silent, non-PoE deployments where devices are powered separately; choose the TL-SG3428XMP for large PoE camera or access point deployments requiring 10G uplinks. What is the difference between the TL-SG3428 and the TL-SG2428P? The TL-SG3428 is a full L2 managed switch with CLI management (SSH/Telnet/Console), SNMP, RMON, Link Aggregation (LACP), and a 16K MAC address table. The TL-SG2428P is a smart managed switch with a simpler web-only interface, 8K MAC table, and includes 24-port PoE+ (250W). Choose the TL-SG3428 for non-PoE deployments requiring enterprise CLI management; choose the TL-SG2428P if PoE is needed with simpler management. Why is the fanless design important? Fanless switches produce zero noise — making them ideal for open-plan offices, boardrooms, reception areas, libraries, and any environment where fan noise would be disruptive or unprofessional. They also have no moving parts, which improves long-term reliability and reduces maintenance requirements compared to fan-cooled switches. What is Omada SDN and do I need a controller? Omada SDN is TP-Link's centralised network management platform. The TL-SG3428 can be managed via the Omada cloud (no hardware controller required), a hardware Omada controller (OC300/OC200), or a software controller on a local server. For standalone deployments, it can also be managed independently via web UI, CLI, or SNMP without any Omada controller. Can I manage it via command line (CLI)? Yes. The TL-SG3428 supports CLI management via the RJ45 console port, Micro-USB console port, Telnet, and SSH — providing enterprise-grade command-line access for advanced configuration, scripting, and troubleshooting. It also supports SNMP v1/v2c/v3 and RMON for integration with network management systems. Does it support inter-VLAN routing without a separate router? Yes. The TL-SG3428 supports static routing (L2+), allowing it to route traffic between VLANs internally — eliminating the need for a dedicated Layer 3 router in many deployments. This is useful for separating camera traffic, staff devices, and guest networks while still allowing controlled inter-VLAN communication.

Read more less

8-Port Gigabit PoE Smart Switch with SFP Uplinks for Professional Network Deployments The TP-Link TL-SG2210P (T1500G-10PS) is a JetStream 8-port Gigabit smart PoE switch built for small to medium business networks, IP surveillance installations, and access control deployments. With a 53W PoE budget across all eight ports, two SFP uplink slots, advanced Layer 2 security features, and a fanless design, it delivers reliable, manageable network infrastructure in a compact, silent form factor. Description All eight RJ45 ports support 802.3af PoE, allowing you to power IP cameras, VoIP phones, wireless access points, and access control readers directly from the switch — no separate power injectors required. The two SFP slots provide Gigabit fibre uplink options for connecting to a core switch or extending the network over fibre. Web-based management, CLI access, SNMP, and RMON give network administrators full visibility and control. Dual firmware image support improves network uptime during firmware updates. Key Features 8 × 10/100/1000Mbps PoE RJ45 ports (802.3af compliant) 53W total PoE power budget 2 × SFP Gigabit uplink slots Fanless design — silent operation, suitable for office and retail environments 20Gbps switching backplane, 14.9Mpps forwarding rate Advanced security: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, RADIUS Authentication L2/L3/L4 QoS and IGMP snooping for voice and video optimisation Web GUI, CLI, SNMP, and RMON management Dual firmware image for improved reliability and uptime 8K MAC address table, 9KB jumbo frame support 100–240V AC input — compatible with Australian mains power Use Cases IP surveillance systems — power and connect up to 8 PoE IP cameras without separate injectors; use SFP uplinks to connect to a core NVR switch over fibre Access control installations — power PoE-enabled door controllers, intercoms, and card readers from a single managed switch Small business networks — deploy as an edge switch with Gigabit connectivity, VLAN segmentation, and QoS for VoIP and video Wireless access point deployments — power multiple 802.3af APs across a floor or building from one central switch Quiet environments — fanless operation makes it ideal for offices, reception areas, classrooms, and retail spaces VoIP phone systems — L3/L4 QoS prioritises voice traffic for clear, uninterrupted calls Specifications Specification Detail Model TL-SG2210P (T1500G-10PS) RJ45 Ports 8 × 10/100/1000Mbps (Auto-Negotiation, Auto MDI/MDIX) SFP Slots 2 × Gigabit SFP PoE Standard IEEE 802.3af PoE Ports 8 (all RJ45 ports) PoE Budget 53W total Switching Backplane 20Gbps Forwarding Rate 14.9Mpps MAC Address Table 8K Jumbo Frame 9KB Fan Fanless Power Supply 100–240V AC, 50/60Hz (external adapter: 48VDC/1.25A) Max Power (PoE on) 64.9W Max Power (PoE off) 9.9W Dimensions 209 × 126 × 26 mm Weight 1.38 kg Network Media 10BASE-T: Cat3/4/5 (max 100m); 100BASE-TX/1000BASE-T: Cat5/5e or above (max 100m) Standards IEEE 802.3i/u/ab/z/ad/x/af, 802.1d/s/w/q/x/p Management Web GUI, CLI, SNMP, RMON SKU TL-SG2210P Barcode 6935364030698 Vendor TP-Link Frequently Asked Questions How many PoE devices can the TL-SG2210P power simultaneously? All 8 RJ45 ports support 802.3af PoE. The total PoE budget is 53W, so the number of devices powered simultaneously depends on each device's power draw. For example, eight 6W cameras can all be powered at once, while fewer high-draw devices may be supported. What PoE standard does the switch support? The TL-SG2210P supports IEEE 802.3af PoE, which provides up to 15.4W per port. It does not support 802.3at (PoE+) or 802.3bt (PoE++). Can I use the SFP slots for fibre uplinks? Yes. The two SFP slots accept Gigabit SFP modules (such as the TP-Link TL-SM311LM for multi-mode fibre or TL-SM311LS for single-mode fibre) for fibre uplink connections to a core switch or router. Is the switch noisy? Does it have a fan? No. The TL-SG2210P is completely fanless, making it silent in operation — ideal for offices, classrooms, and other noise-sensitive environments. How do I manage the switch? The TL-SG2210P supports web-based GUI management, CLI (command line interface), SNMP v1/v2c/v3, and RMON for comprehensive network monitoring and control. Does the switch support VLANs? Yes. The TL-SG2210P supports 802.1Q VLAN tagging, allowing you to segment your network into separate logical networks for security and traffic management. Is this switch compatible with Australian 240V mains power? Yes. The TL-SG2210P accepts 100–240V AC 50/60Hz input via its external power adapter, making it fully compatible with Australian mains power. Does CCTV Guru ship this product Australia-wide? Yes. The TL-SG2210P is stocked locally and ships Australia-wide.

Read more less

Power Your Network Devices Without the Complexity The TP-Link TL-POE170S is a single-port PoE++ injector designed for professional installers and IT administrators who need a reliable, high-wattage power solution for demanding network devices. Delivering up to 60W over a single Ethernet cable, it eliminates the need for separate power runs — reducing installation time and infrastructure costs on commercial and residential projects alike. Key Features 60W PoE++ Output — Supports power-hungry devices such as PTZ cameras, wireless access points, and VoIP phones IEEE 802.3af/at/bt Compliant — Backwards compatible across all three PoE standards for maximum device compatibility Dual Gigabit Ports — 10/100/1000Mbps data-in and power+data-out ports ensure full-speed network throughput Auto-Sensing Power Delivery — Automatically detects and supplies only the power the connected device requires Integrated Power Supply — No external power brick required; connects directly to a standard AC outlet (100–240V) Plug & Play — Zero configuration needed; simply connect and power on Flexible Mounting — Supports both wall-mount and desktop installation to suit any environment Durable Metal Casing — Built for long-term reliability in professional installation environments Typical Use Cases Powering PTZ CCTV cameras and IP cameras in locations without nearby power outlets Supplying high-wattage wireless access points in commercial Wi-Fi deployments Connecting VoIP phones and intercoms via a single Ethernet run Adding PoE capability to non-PoE switches in existing network infrastructure Temporary or permanent single-device PoE installations in retail, hospitality, and office environments Technical Specifications Specification Detail Model TL-POE170S PoE Standards IEEE 802.3af / 802.3at / 802.3bt Max PoE Output 60W Ports 1× Data-In (RJ45), 1× Power+Data-Out (RJ45) Port Speed 10/100/1000 Mbps (Gigabit) Power Input 100–240V AC, 50/60Hz, 1.6A Network Standards IEEE 802.3i / 802.3u / 802.3ab Cable Support Cat5 / Cat5e / Cat6, up to 100m Dimensions (W×D×H) 155 × 70 × 42 mm Weight 0.98 kg Mounting Wall-mount or Desktop Barcode (EAN) 4897098683897 SKU TL-POE170S Frequently Asked Questions What is the difference between 802.3af, 802.3at, and 802.3bt? These are IEEE PoE standards with increasing power budgets. 802.3af (PoE) delivers up to 15.4W, 802.3at (PoE+) up to 30W, and 802.3bt (PoE++) up to 60W or 100W depending on the type. The TL-POE170S supports all three, making it compatible with virtually any PoE-enabled device. Will this work with my existing non-PoE switch? Yes. The TL-POE170S sits between your existing switch and the powered device. It draws data from the switch via the Data-In port and injects power onto the cable through the Power+Data-Out port — no switch upgrade required. Can I use this to power a PTZ camera? Yes, provided your PTZ camera is PoE-compatible and requires 60W or less. The auto-sensing feature ensures only the required wattage is delivered, protecting your equipment. Does it require any software configuration? No. The TL-POE170S is fully Plug & Play. Connect the cables, plug into the AC outlet, and it operates immediately with no software or web interface required. What cable length is supported? Standard Ethernet cable runs up to 100 metres (Cat5e or Cat6 recommended for Gigabit speeds and reliable PoE delivery).

Read more less

TP-Link TL-SX3016F JetStream 16-Port 10GE SFP+ L2+ Managed Switch 16-Port 10G SFP+ Core Switch for High-Density Fibre Networks The TP-Link TL-SX3016F is a JetStream L2+ managed switch with 16 full 10 Gbps SFP+ slots, 320 Gbps non-blocking switching capacity, and a fanless design for silent operation. Built for data centres, enterprise cores, and high-density campus networks, it delivers wire-speed 10G fibre aggregation with advanced L2+ features, Omada SDN integration, static routing, and dual fixed AC power supplies for carrier-class reliability. An ideal aggregation or core switch for Australian enterprise and commercial network deployments. Key Features 16 × 10GE SFP+ slots — full wire-speed 10 Gbps on every port simultaneously 320 Gbps non-blocking switching capacity with 238.08 Mpps packet forwarding rate Fanless design — silent operation with metal casing rated to 45°C operating temperature Dual fixed AC power supplies — carrier-class redundancy for mission-critical environments Omada SDN integration — centralised cloud management, remote access, and intelligent monitoring Static routing (IPv4 & IPv6) — up to 48 static routes for efficient inter-VLAN traffic management Enterprise QoS — L2/L3/L4 traffic prioritisation for voice, video, and critical applications IGMP Snooping — efficient multicast traffic management for AV-over-IP and video surveillance Advanced security — IP-MAC-Port Binding, ACL, Port Security, 802.1X Authentication 32K MAC address table with 24 Mbit packet buffer Dual console ports — RJ45 and Micro-USB for flexible CLI access 1U rack-mountable — standard 19-inch rack compatible Use Cases Data Centre Core & Aggregation: Aggregate 10G uplinks from multiple access switches into a high-capacity core with wire-speed forwarding and no oversubscription. Enterprise Campus Networks: Connect distribution layer switches, servers, and storage arrays at 10G with centralised Omada SDN management across multiple sites. High-Density IP Surveillance: Aggregate 10G uplinks from multiple PoE switches feeding high-resolution IP cameras and NVRs into a central recording and management infrastructure. AV-over-IP & Broadcast: IGMP Snooping and QoS ensure multicast AV streams are delivered reliably without flooding the network. Colocation & Server Rooms: Fanless, silent operation and dual redundant power supplies make it suitable for noise-sensitive and uptime-critical environments. Specifications Specification Detail Model TL-SX3016F SFP+ Ports 16 × 10GE SFP+ Console Ports 1 × RJ45 + 1 × Micro-USB Switching Capacity 320 Gbps Packet Forwarding Rate 238.08 Mpps MAC Address Table 32K Packet Buffer 24 Mbit Jumbo Frame 9 KB Static Routes Up to 48 (IPv4 & IPv6) DRAM 256 MB Flash 32 MB Power Supply 2 × fixed AC (100–240 V, 50/60 Hz) — dual redundant Max Power Consumption 32.74 W @ 220 V/50 Hz Cooling Fanless Operating Temperature 0°C – 45°C Dimensions (W × D × H) 440 × 220 × 44 mm (1U rack) Mounting Rack-mountable (19-inch) Management Omada SDN, Cloud, Web UI, CLI (Console) Layer L2+ Weight 3.94 kg Frequently Asked Questions What SFP+ transceivers are compatible with the TL-SX3016F? The TL-SX3016F supports standard SFP+ MSA-compliant transceivers. TP-Link’s own modules — including the TL-SM5110-SR (multi-mode, 300 m) and TL-SM5110-LR (single-mode, 10 km) — are fully compatible, as are compatible DAC cables for short rack-to-rack connections. Third-party SFP+ modules may also work but should be tested for compatibility. Does the TL-SX3016F require an Omada Controller to function? No. The switch operates fully in standalone mode and can be managed via its web UI or CLI without any controller. Omada SDN integration is optional and enables centralised management of the entire network — switches, routers, and access points — from a single interface. Is the switch truly fanless at full load? Yes. The TL-SX3016F is completely fanless with no moving parts, relying on passive thermal management through its metal chassis. It is rated for operation up to 45°C, making it suitable for server rooms, comms rooms, and noise-sensitive environments. What is the benefit of dual redundant power supplies? Dual redundant power supplies mean the switch continues operating if one power supply fails — the second takes over automatically with no downtime. This is essential for mission-critical environments where network availability cannot be compromised. Can the TL-SX3016F be used as a core switch in a large IP surveillance network? Yes. Its 16 × 10G SFP+ ports, 320 Gbps switching capacity, IGMP Snooping, and QoS make it well-suited as a core aggregation switch for large IP camera networks — aggregating 10G uplinks from multiple PoE access switches feeding high-resolution cameras and NVRs.

Read more less

Enterprise-Grade 24-Port PoE+ Smart Switch with Omada SDN Cloud Management The TP-Link TL-SG2428P is a JetStream Layer 2 smart managed switch that delivers 24 Gigabit PoE+ ports, a 250W power budget, and four Gigabit SFP uplink slots in a rack-mountable 1U chassis. Fully integrated with TP-Link's Omada Software Defined Networking (SDN) platform, it supports zero-touch provisioning, centralised cloud management, and intelligent monitoring — making it the ideal core or distribution switch for commercial CCTV systems, enterprise Wi-Fi deployments, and multi-site business networks across Australia. Key Features 24× Gigabit PoE+ Ports (802.3at/af): Power and connect IP cameras, wireless access points, VoIP phones, and other PoE/PoE+ devices at up to 30W per port across all 24 ports. 250W Total PoE Budget: Generous shared power budget supports large mixed deployments of PoE and PoE+ devices simultaneously. 4× Gigabit SFP Uplink Slots: Connect to fibre backbone switches or extend your network over long distances using single-mode or multi-mode SFP modules. Omada SDN Integration: Centrally manage the switch alongside Omada access points and routers via the Omada cloud platform or local controller — with zero-touch provisioning (ZTP) for rapid remote deployment. L2/L3/L4 QoS & IGMP Snooping: Prioritises video, voice, and critical application traffic to ensure smooth IP camera feeds, VoIP calls, and IPTV streams under heavy network load. Static Routing: Routes internal traffic between VLANs without requiring a dedicated router, improving efficiency in segmented networks. Robust Security Suite: IP-MAC-Port Binding, ACL, Port Security, DoS Defence, Storm Control, DHCP Snooping, 802.1X, and RADIUS Authentication protect the network from unauthorised access and attacks. 802.1Q VLAN: Segment camera traffic, staff devices, guest networks, and IoT devices onto separate logical networks for improved security and performance. IPv6 Support: Dual IPv4/IPv6 stack with MLD Snooping and IPv6 Neighbour Discovery for future-ready network deployments. 56 Gbps Switching Capacity: Non-blocking switching fabric handles simultaneous high-bandwidth video streams from all 24 cameras without bottlenecks. Rack Mountable (1U): Standard 19-inch rack form factor (440 × 220 × 44mm) for clean, professional installations in comms cabinets and server rooms. Common Use Cases 24-camera IP CCTV systems for commercial buildings, warehouses, and retail centres Enterprise Wi-Fi deployments with multiple Omada access points managed from a single controller VoIP phone networks for medium-sized businesses Multi-VLAN network segmentation for security-conscious installations Multi-site business networks managed centrally via Omada cloud Distribution switch in multi-floor or multi-building network architectures Technical Specifications Model TL-SG2428P RJ45 Ports 24× 10/100/1000Mbps (all PoE+) SFP Slots 4× Gigabit SFP (fibre uplink) PoE Standard IEEE 802.3at (PoE+) / 802.3af (PoE) Total PoE Budget 250W Switching Capacity 56 Gbps Packet Forwarding Rate 41.7 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mbit Jumbo Frame 9KB QoS L2/L3/L4 (802.1p CoS, DSCP) IGMP Snooping Yes VLAN 802.1Q VLAN, Voice VLAN, Private VLAN Static Routing Yes Security IP-MAC-Port Binding, ACL, DoS Defence, DHCP Snooping, 802.1X, RADIUS IPv6 Dual IPv4/IPv6 stack, MLD Snooping SDN Management Omada SDN (cloud & local controller) Zero-Touch Provisioning Yes (ZTP via Omada) Fans 2× (active cooling) Mounting Rack mountable (19″, 1U) Dimensions (W × D × H) 440 × 220 × 44mm Power Supply 100–240V AC, 50/60Hz (internal) Max Power Consumption 32.1W (no PD) / 308.6W (full PoE load) Standards IEEE 802.3i/u/ab/z/ad/x/az/1d/1s/1w/1q/1p/1x Frequently Asked Questions What is Omada SDN and do I need a controller? Omada SDN (Software Defined Networking) is TP-Link's centralised network management platform. The TL-SG2428P can be managed via the Omada cloud (no hardware controller required), a hardware Omada controller (OC300/OC200), or a software controller running on a local server or Raspberry Pi. For small deployments, the free Omada cloud is the simplest option. What is Zero-Touch Provisioning (ZTP)? ZTP allows the switch to be pre-configured in the Omada cloud before it arrives on site. Once connected to the internet at the installation location, it automatically downloads its configuration — eliminating the need for an on-site technician to manually configure each switch. Ideal for multi-site deployments and remote installations. How many PoE cameras can I connect? Up to 24 IP cameras can be connected via the PoE+ ports. For standard 802.3af cameras drawing around 10–12W each, the 250W budget comfortably supports a full 24-camera deployment. For higher-power PTZ or PoE+ cameras, calculate your total load to stay within the 250W budget. Can I use this switch without Omada? Yes. The TL-SG2428P can be managed via its local web interface without any Omada controller or cloud account. Omada integration is optional but recommended for multi-device or multi-site deployments where centralised management is beneficial. Does it support VLAN and network segmentation? Yes. The TL-SG2428P supports 802.1Q VLAN, Voice VLAN, and Private VLAN, allowing you to segment camera traffic, staff devices, guest Wi-Fi, and IoT devices onto separate logical networks for improved security and performance. Is it rack mountable? Yes. The TL-SG2428P is a standard 1U rack-mountable switch (440mm wide) and includes rack mounting brackets. It fits any standard 19-inch equipment rack or comms cabinet.

Read more less

TP-Link TL-SG2008 JetStream 8-Port Gigabit Smart Switch The TP-Link TL-SG2008 is an 8-port Gigabit smart switch built for small businesses and professional installers who need more than a basic unmanaged switch — without the complexity of a full enterprise platform. With Omada SDN integration, VLAN segmentation, QoS, static routing, and cloud management via the Omada app, it delivers enterprise-grade control in a compact, fanless desktop steel case. Key Features 8 x 10/100/1000Mbps Auto-Negotiation RJ45 ports with Auto MDI/MDIX 1 x PoE IN port — the switch itself can be powered by a PoE source (no power adapter required) Omada SDN integration — Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring Omada app and web interface — manage from anywhere via cloud or local access 802.1Q VLAN, ACL, Port Security, and Storm Control for robust network segmentation and security L2/L3/L4 QoS with 8 priority queues — optimise voice, video, and data traffic IGMP Snooping — efficient multicast traffic management Static routing support WEB, CLI, SNMP, and RMON management modes 16Gbps switching capacity, 11.9Mpps packet forwarding rate 8K MAC address table, 9KB jumbo frame support Fanless design — silent operation Desktop steel case — durable and compact Use Cases Small business networks — segment staff, guest, and IoT devices using VLANs without a full enterprise switch IP camera and NVR installations — isolate camera traffic on a dedicated VLAN, prioritise video streams with QoS, and manage remotely via Omada cloud Access control and security systems — apply ACLs and port security to lock down sensitive network segments Multi-site Omada deployments — integrate with Omada EAPs and routers for a unified, centrally managed network across multiple locations PoE-powered deployments — the PoE IN port allows the switch to be powered directly from an upstream PoE switch, simplifying cable runs in tight spaces Specifications Specification Detail Model TL-SG2008 Ports 8 x 10/100/1000Mbps RJ45 (Auto-Negotiation / Auto MDI/MDIX) PoE IN Port 1 x PoE IN (switch can be powered by upstream PoE source) Switching Capacity 16Gbps Packet Forwarding Rate 11.9Mpps MAC Address Table 8K Jumbo Frame 9KB Standards IEEE 802.3i/u/ab/ad/x, 802.1d/s/w/q/p/x QoS 802.1p CoS/DSCP, 8 priority queues, SP & WRR scheduling, bandwidth control, storm control VLAN 802.1Q VLAN Security ACL, Port Security, Storm Control, 802.1x Multicast IGMP Snooping Routing Static Routing Management Web GUI, CLI, SNMP, RMON, Omada app, Cloud SDN Platform Omada SDN (Zero-Touch Provisioning supported) Fan Fanless Enclosure Desktop steel case Power Supply 12VDC / 1A external adapter or PoE IN Max. Power Consumption 6.4W (220V / 50Hz) Dimensions (W × D × H) 209 × 126 × 26mm Weight 0.9kg Network Media 10BASE-T: Cat3/4/5 (max 100m); 100BASE-TX / 1000BASE-T: Cat5/5e or above (max 100m) SKU / Barcode TL-SG2008 / 6935364010546 Frequently Asked Questions What is the difference between a smart switch and an unmanaged switch? An unmanaged switch is plug-and-play with no configuration options. A smart switch like the TL-SG2008 adds features such as VLAN segmentation, QoS traffic prioritisation, ACL security policies, and remote management — giving you control over how your network behaves without the full complexity of an enterprise managed switch. Does the TL-SG2008 supply PoE to connected devices? No. The TL-SG2008 does not output PoE to connected devices. However, it has a PoE IN port that allows the switch itself to be powered by an upstream PoE switch — useful for eliminating a power adapter in tight or remote installations. What is Omada SDN and do I need a controller? Omada SDN is TP-Link’s software-defined networking platform that allows centralised management of compatible switches, access points, and routers. The TL-SG2008 supports Zero-Touch Provisioning (ZTP) and can be managed via the Omada cloud or a local Omada controller. For standalone use, it can also be managed directly via its web interface or CLI without any controller. Can I create VLANs on this switch? Yes. The TL-SG2008 supports 802.1Q VLANs, allowing you to segment your network into isolated groups — for example, separating IP camera traffic from office LAN traffic on the same physical switch. Is it rack-mountable? The TL-SG2008 is a desktop unit and is not designed for direct rack mounting. It is suited to desktop, shelf, or wall-adjacent placement in small installations. Does it ship Australia-wide? Yes. CCTV Guru ships the TL-SG2008 Australia-wide from local stock.

Read more less

Add PoE+ Power to Any Gigabit Network Port — No PoE Switch RequiredThe TP-Link TL-POE160S is a single-port Gigabit PoE+ injector that adds Power over Ethernet capability to any standard network switch or router port. Simply connect it between your existing switch and a PoE-powered device — such as an IP camera, wireless access point, or VoIP phone — and it delivers up to 30W of power alongside data over a single Ethernet cable. No configuration required.Key Features IEEE 802.3af/at Compliant — compatible with all standard PoE and PoE+ powered devices 2× Gigabit Ports — 1× data-in (from switch/router) and 1× data+power-out (to PoE device), both at 10/100/1000Mbps Up to 30W Output — auto-senses and supplies only the power the connected device requires Integrated Power Supply — built-in AC socket (100–240V), no external power brick needed Plug and Play — zero configuration; connect and go Wall-Mountable or Desktop — flexible installation for any environment LED Power Indicator — confirms active PoE power delivery at a glance Typical Use Cases Adding PoE power to a single IP camera without replacing an existing non-PoE switch Powering a wireless access point in a location without a nearby power outlet Supplying power to a VoIP phone or intercom from a standard Ethernet port Temporary or single-device PoE deployments where a full PoE switch is not required Retrofitting PoE capability to legacy network infrastructure Technical Specifications Specification Detail Model TL-POE160S PoE Standard IEEE 802.3af / 802.3at (PoE+) Ports 1× Gigabit RJ45 Data-In, 1× Gigabit RJ45 Data+Power-Out Port Speed 10/100/1000 Mbps (auto-negotiation) Max PoE Output 30W (auto-sensing) Power Input 100–240V AC, 50/60Hz (integrated) Network Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3af, 802.3at Max Cable Length Up to 100m (Cat5e/Cat6) Installation Wall-mount or desktop Dimensions (W×D×H) 125 × 59.4 × 36.8 mm Operating Temperature 0–40°C Certifications FCC, CE, RoHS Warranty 3 Years What's in the Box TL-POE160S PoE+ Injector Installation Guide Frequently Asked Questions What is a PoE injector and how does it work? A PoE injector sits between your existing network switch and a PoE-powered device. It takes standard Ethernet data from your switch and adds DC power to the cable, so the connected device receives both data and power through a single RJ45 cable — no separate power adapter needed at the device end. Do I need to replace my switch to use this injector? No. The TL-POE160S works with any standard Ethernet switch or router, regardless of whether it supports PoE. It adds PoE capability to a single port without any changes to your existing infrastructure. What devices can I power with the TL-POE160S? Any IEEE 802.3af or 802.3at compliant device drawing up to 30W — including IP cameras, wireless access points, VoIP phones, intercoms, and access control readers. Does it work with non-PoE devices? The TL-POE160S will only supply power to devices that actively request it via the 802.3af/at handshake. Non-PoE devices connected to the output port will receive data only and will not be damaged. Can I use this outdoors? The injector itself is rated for indoor use (0–40°C). However, it can power outdoor PoE devices such as weatherproof IP cameras via a cable run from an indoor installation point.

Read more less

TP-Link TL-SG3452 JetStream 48-Port Gigabit L2 Managed Switch with 4 SFP Slots Enterprise-Grade L2 Switching for Business & Commercial Networks The TP-Link TL-SG3452 is a rack-mountable 48-port Gigabit L2 managed switch with 4 SFP uplink slots, designed for demanding business, commercial, and campus network environments. Integrated into the TP-Link Omada SDN platform, it supports Zero-Touch Provisioning, centralised cloud management, and intelligent monitoring — making it a scalable, cost-effective core or distribution layer switch for Australian IT deployments. Key Features 48 × 10/100/1000 Mbps RJ45 ports + 4 × Gigabit SFP uplink slots Omada SDN integration — Zero-Touch Provisioning (ZTP), centralised cloud management, and intelligent monitoring Static routing for efficient internal traffic management across VLANs 104 Gbps switching capacity with 77.4 Mpps packet forwarding rate Fanless design — silent operation, ideal for office and noise-sensitive environments Robust security: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, RADIUS Authentication L2/L3/L4 QoS with 8 priority queues and IGMP Snooping for optimised voice and video traffic Standalone management via Web UI, CLI (Console & Telnet/SSH), SNMP, RMON, and Dual Image Rack-mountable 1U form factor — standard 19-inch rack compatible Use Cases Commercial & Enterprise Networks: Deploy as an access or distribution layer switch in medium to large business environments requiring high port density and centralised management. IP Surveillance Systems: Connect large numbers of IP cameras and NVRs with IGMP Snooping and QoS ensuring smooth, uninterrupted video streams. Education & Campus Networks: Omada SDN and 802.1X RADIUS authentication enable secure, scalable multi-site deployments managed from a single controller. Hospitality & Retail: VLAN segmentation and guest network isolation keep staff, POS, and guest traffic separate and secure. Data Centres & Server Rooms: Fanless operation and high switching capacity make it suitable for quiet, high-throughput rack environments. Specifications Specification Detail Model TL-SG3452 (also known as T2600G-52TS) RJ45 Ports 48 × 10/100/1000 Mbps SFP Slots 4 × Gigabit SFP Console Ports 1 × RJ45 + 1 × Micro-USB Switching Capacity 104 Gbps Packet Forwarding Rate 77.4 Mpps MAC Address Table 16K Jumbo Frame 9 KB Cooling Fanless Max Power Consumption 32.8 W (220 V / 50 Hz) Power Supply 100–240 V AC, 50/60 Hz Dimensions (W × D × H) 440 × 220 × 44 mm (1U rack) Mounting Rack-mountable (19-inch) Management Web UI, CLI (Console/Telnet/SSH), SNMP v1/v2c/v3, RMON, Omada SDN, Dual Image QoS 8 priority queues, 802.1p CoS/DSCP, SP/WRR/SP+WRR scheduling, bandwidth control Weight 4.3 kg Frequently Asked Questions Does the TL-SG3452 require the Omada controller to function? No. The TL-SG3452 can operate in standalone mode and be managed via its web UI, CLI (console, Telnet, or SSH), or SNMP without any controller. Omada SDN integration is optional and enables centralised cloud or hardware controller management for multi-site deployments. What is Zero-Touch Provisioning (ZTP)? ZTP allows the switch to be automatically discovered and configured by the Omada controller without any manual on-site setup. This is particularly useful for IT teams managing multiple sites or deploying switches in remote locations across Australia. Can I use the SFP slots for fibre uplinks? Yes. The 4 Gigabit SFP slots support both multimode and single-mode SFP transceivers, making them suitable for fibre uplinks to core switches, patch panels, or inter-building connections. Is the TL-SG3452 suitable for IP camera deployments? Yes. With IGMP Snooping, L2/L3/L4 QoS, and VLAN support, the TL-SG3452 is well-suited for IP surveillance networks. It can prioritise camera traffic and segment it from other network traffic for improved performance and security. Does it support link aggregation (LAG)? Yes. The TL-SG3452 supports IEEE 802.3ad LACP (Link Aggregation Control Protocol), allowing multiple ports to be bonded together for increased uplink bandwidth and redundancy. What is Dual Image and why does it matter? Dual Image stores two firmware versions on the switch simultaneously. If a firmware upgrade fails or causes issues, the switch can automatically fall back to the previous stable version — reducing downtime risk during maintenance windows.

Read more less

TP-Link TL-FC111B-20 10/100 Mbps WDM Media Converter• Complies with 802.3u 10/100Base-TX, 100Base-FX standards• Auto-negotiation of Half-Duplex/Full-Duplex transfer mode• Adopts WDM technology, transmitting and receiving data on one single fibre• Extends fibre distance up to 20kmWhat This Product DoesTL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111B-20 transmits data at 1310nm wavelength and receives data at 1550nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111B-20 should send data at a wavelength of 1550nm and receive data at a wavelength of 1310nm. TP-Link another media converter TL-FC111A-20 is one of the products that can cooperate with TL-FC111B-20.Other FeaturesBesides, this media converter can be used as a standalone device (no rack required) or used with TP-Link’s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.

Read more less

TP-Link TL-SM331T 1000BASE-T RJ45 SFP Module The TP-Link TL-SM331T is a 1000BASE-T copper SFP module that adds a standard RJ45 Gigabit Ethernet port to any SFP-equipped switch, router, or NVR. Supporting up to 100 metres over Cat5e or better cabling, it’s the practical solution for installers and network engineers who need to extend a copper Gigabit connection from an SFP slot — without optical fibre or media converters. Key Features 1000BASE-T Copper SFP — Converts an SFP slot into a standard RJ45 Gigabit Ethernet port, compatible with existing Cat5e or Cat6 cabling infrastructure. 100m Reach over Cat5e — Supports the full standard Ethernet distance of 100 metres over UTP Cat5e or above cable. Hot-Swappable — Insert or remove the module without powering down the host device, minimising network downtime during maintenance or upgrades. IEEE 802.3-2002 Compliant — Fully standards-compliant for broad compatibility with SFP-capable switches, NVRs, and routers from TP-Link and other vendors. TX Disable Support — Allows the transmitter to be disabled via software for diagnostics and power management. Low Power Consumption — Typical draw of just 0.5W (max 0.8W), minimising heat and energy use in dense switch deployments. Fully Metallic Enclosure — Robust all-metal housing provides low EMI emissions and durability in rack and cabinet environments. 3.3V Power Supply — Standard SFP power rail, compatible with all compliant SFP host systems. Use Cases Adding a copper Gigabit uplink port to a fibre-only or SFP-only managed switch Connecting a VIGI NVR or IP camera recorder to a switch via an SFP slot using existing Cat6 cabling Extending a Gigabit copper connection from a core switch to an edge device without a media converter Replacing a failed or end-of-life SFP copper module in an existing network installation Providing a flexible, hot-swappable copper port in a rack-mounted switch for temporary or permanent connections Technical Specifications Specification Detail Model TL-SM331T Module Type 1000BASE-T Copper RJ45 SFP Port 1 × 1000Mbps RJ45 Data Rate 1.25 Gbps Max Cable Length 100m (UTP Cat5e or above) Standard IEEE 802.3-2002 (1000BASE-T) Hot-Swappable Yes TX Disable Yes Power Supply 3.3V (from host SFP slot) Power Consumption 0.5W typical / 0.8W max Enclosure Fully metallic (low EMI) Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Certifications FCC, CE Weight Approx. 60g In the Box TL-SM331T module, Installation Guide Warranty 2 Years Recommended Accessories TP-Link TL-SG3210 JetStream Managed Switch — An SFP-equipped managed switch that accepts the TL-SM331T for flexible copper or fibre uplink configurations. TP-Link VIGI NVR with SFP Port — Use the TL-SM331T to connect a VIGI NVR to your network via its SFP slot using standard Cat6 cabling. Cat6 Ethernet Cable — Recommended for reliable Gigabit performance at the full 100m distance. TP-Link TL-SM311LM SFP Module (Multimode Fibre) — If fibre uplinks are needed alongside copper, this companion SFP module covers multimode fibre runs. Frequently Asked Questions What is a copper RJ45 SFP module and why would I need one? An SFP slot on a switch or NVR is typically used for fibre optic connections, but a copper RJ45 SFP module like the TL-SM331T converts that slot into a standard Ethernet port. This is useful when you need an additional copper Gigabit port, want to avoid a media converter, or need to connect to existing Cat5e/Cat6 cabling from an SFP-only uplink slot. Is the TL-SM331T compatible with non-TP-Link switches? The TL-SM331T is IEEE 802.3-2002 compliant and uses the standard SFP form factor, making it broadly compatible with most SFP-capable switches and routers from other vendors. However, some managed switches enforce vendor-specific SFP locking — check your switch’s documentation before purchasing. What cable category is required? Cat5e or above (Cat6, Cat6A) is required for 1000BASE-T operation at up to 100 metres. Cat5 (not Cat5e) is not recommended for Gigabit speeds at full distance. Can I insert or remove this module while the switch is running? Yes. The TL-SM331T is hot-swappable, meaning it can be inserted or removed without powering down the host switch or causing a full system restart. The affected port will go offline briefly during the swap. Does this module work with TP-Link VIGI NVRs that have an SFP port? Yes. VIGI NVRs with an SFP uplink slot accept the TL-SM331T, allowing you to connect the NVR to your network switch using standard Cat5e or Cat6 cabling rather than fibre — a practical option when the NVR is within 100 metres of the switch.

Read more less

Ubiquiti 5GHz PrismAP Antenna 90 degree

Read more less

5 GHz LTU® client that establishes extremely long-distance wireless links with an LTU Rocket serving as its base station.The LTU XR is a high-performance, cost-effective PtMP CPE for wireless ISPs that can reach up to a 550 Mbps throughput rate. The LTU XR also facilitates independent transmission and receives channel frequency configurations anywhere within its radio band to avoid local interference and ensure superior client performance. Additionally, the LTU XR is equipped with a Bluetooth management radio so it's easy to set up and configure with the UISP® Mobile app.Features: Proprietary Ubiquiti LTU core processor Long-range, 29 dBi antenna with InnerFeed® technology High data and performance rate (1024 QAM) Link range up to 35 km Channel width flexibility (10/20/30/40/50 MHz bandwidth) Central configuration management from the AP side Frequency splitting Router mode support Integrated GPS Link planning support via ISP Design Center Quick, Bluetooth-powered setup with the UISP Mobile app

Read more less

Bosch Security Systems Mount Adapter Plate White Aluminium 0.168 Kg Used With Pendant Mounts, BOSNDA-3080-PIP Specifications Brand: Bosch Product Type: Others Colour: White Material: Aluminium Thread Type: Npt 1 1/2" Thread Weight: 0.168 Kg Diameter(Mm): 137 Height(Mm): 48.8 DownloadDatasheet

Read more less

HiLook THC-T257-LMS 3K Dual Light Audio Fixed Turret Camera High quality imaging with 3K, 2960 × 1665 resolution Fixed focal lens, 2.8 mm and 3.6 mm optional Up to 40 m IR distance for bright night imaging Up to 20 m white light distance for bright night imaging One port for four switchable signals (TVI/AHD/CVI/CVBS） Water and dust resistant (IP66) High quality audio with audio over coaxial cable, built-in microphone Camera Image Sensor: 3K CMOS Max. Resolution: 2960 (H) × 1665 (V) Min. Illumination: 0.01 Lux @ (F2.0, AGC ON), 0 Lux with IR Shutter Time: PAL: 1/25 s to 1/50,000 s; NTSC: 1/30 s to 1/50,000 s Day & Night: ICR Angle Adjustment: Pan: 0 to 360°, Tilt: 0 to 75°, Rotate: 0 to 360° Signal System: PAL/NTSC Lens Lens Type: 2.8 mm and 3.6 mm fixed focal lens Focal Length & FOV: 2.8 mm, horizontal FOV: 104.9°, vertical FOV: 67.3°, diagonal FOV: 129.8° 3.6 mm, horizontal FOV: 81.3°, vertical FOV: 50.7°, diagonal FOV: 102.4° Lens Mount: M12 Illuminator Supplement Light Type: White Light;IR Supplement Light Range: IR : up to 40 m White Light : up to 20 m Image Image Settings: Brightness, Sharpness, Smart IR Frame Rate: TVI: 3K @20 fps, 4 MP @25 fps/30 fps, 1080p @25 fps/30 fps AHD: 5 MP @20 fps, 4 MP @25 fps/30 fps CVI: 4 MP @25 fps/30 fps: CVBS: PAL/NTSC Day/Night Mode: Auto/Color/BW (Black and White) Wide Dynamic Range (WDR): Digital WDR Image Enhancement: DWDR/BLC/HLC/Global White Balance: Auto/Manual AGC: Yes Interface Video Output: Switchable TVI/AHD/CVI/CVBS General Material: Body: metal Enclosure: metal Dimension: Ø127.9 mm × 97.8 mm (Ø5.04" × 3.85") Weight: Approx. 476 g (0.75 lb.) Operating Condition: -40 °C to 60 °C (-40 °F to 140 °F). Humidity: 90% or less (non-condensation) Communication: HIKVISION-C Language: English Power Supply: 12 VDC ± 25% *You are recommended to use one power adapter to supply the power for one camera. Consumption: Max. 3.3 W Approval Protection: IP66 Downloads Data SheetQuick Start GuideUser Manual

Read more less

Hikvision Corner mount DS-1476ZJ-SUS Corner Mount Stainless Steel Hikvision White Parameters Weight 2280 g (5.03 lb.) Appearance Hikvision White Material Stainless Steel Dimension 250 mm × 126 mm × 105 mm (9.84" × 4.96" × 4.13") Description Corner Mount Download Quick Start Guide

Read more less