UniFi Switching — NDAA Compliant
UniFi Switch Pro 48 PoE — 48-Port Gen2 Layer 3 Managed Gigabit PoE Switch with Touch Display (USW-Pro-48-PoE)
The UniFi Switch Pro 48 PoE (USW-Pro-48-PoE) is a fully managed Layer 2 / Layer 3 access-layer switch built for demanding UniFi networks. It pairs (40) Gigabit PoE+ RJ45 ports, (8) Gigabit PoE++ RJ45 ports, and (4) 10G SFP+ uplinks with advanced routing — inter-VLAN routing, static routing, and a built-in DHCP server. With up to 600W of total PoE, a 1.3″ colour touchscreen, USP RPS power-redundancy input, and near-silent cooling, it's the ideal aggregation point for offices, retail, and commercial sites anywhere in Australia. Genuine Ubiquiti stock with fast Australia-wide shipping.
Ports
48x GbE + 4x 10G SFP+
PoE Budget
600W Total
Switching
Layer 2 + Layer 3
Display
1.3″ Touchscreen
Why Choose the UniFi Switch Pro 48 PoE?
48 Gigabit PoE Ports
Power and connect up to 48 devices over a single cable each — (40) GbE PoE+ ports for APs, cameras, and phones, plus (8) GbE PoE++ (802.3bt) ports for high-draw devices like PTZ cameras and multi-radio access points.
600W Total PoE Budget
A generous 600W PoE supply drives a full rack of powered devices, with USP RPS redundant-power input support to keep critical infrastructure online during a power-supply fault.
Layer 3 Routing Built In
Beyond a rich Layer 2 feature set, the Pro 48 PoE adds inter-VLAN routing, static routing, and a DHCP server — offload routing from your gateway and segment networks right at the access layer.
4x 10G SFP+ Uplinks
Four 10G SFP+ ports provide high-bandwidth uplinks and aggregation to the core, eliminating bottlenecks between switches, servers, and storage.
1.3″ Colour Touch Display
An onboard 1.3″ LCM colour touchscreen with AR switch management surfaces port status, throughput, and uptime at a glance — no laptop required at the rack.
Managed in UniFi Network
Configure and monitor from anywhere through the powerful UniFi Network web and mobile app. Near-silent cooling keeps it quiet enough for offices and comms rooms alike.
NDAA Compliant
Fully NDAA Section 889 compliant for government, defence, and security-sensitive installations where supply-chain integrity is a requirement.
Technical Specifications
Model
USW-Pro-48-PoE (Gen2)
Management
Fully managed, Layer 2 + Layer 3
PoE+ RJ45 Ports
(40) GbE, 802.3at PoE+
PoE++ RJ45 Ports
(8) GbE, 802.3bt PoE++
SFP+ Ports
(4) 10G SFP+
Total PoE Power
600W
Power Redundancy
(1) USP RPS DC input
Display
1.3″ LCM colour touchscreen with AR switch management
Layer 3 Features
Inter-VLAN routing, static routing, DHCP server
Cooling
Near-silent active cooling
Management Software
UniFi Network application, version 5.10.5 and later
Compliance
NDAA compliant
Downloads & Resources
USW-Pro-48-PoE Datasheet
Ubiquiti Quick Start Guide
Best For
Offices & Workplaces
Powers desk phones, APs, and cameras across a floor with PoE+ and PoE++ headroom to spare.
Retail & Hospitality
VLAN-segment guest, POS, and CCTV traffic with Layer 3 routing handled at the switch.
CCTV Aggregation
48 PoE ports plus 10G SFP+ uplinks to a UniFi NVR make it an ideal camera access switch.
Comms Rooms
Near-silent cooling, a touch display, and USP RPS redundancy suit always-on infrastructure.
Adopt and manage with the UniFi Network application (version 5.10.5 or later) via a UniFi gateway or Cloud Key.
Mixes 802.3at PoE+ and 802.3bt PoE++ ports — check device draw against the 600W total budget.
Add a UniFi SmartPower RPS (USP RPS) via the DC input for redundant-power protection.
Use the (4) 10G SFP+ ports for high-bandwidth uplinks or aggregation to the network core.
Frequently Asked Questions
How much PoE power does the USW-Pro-48-PoE provide?
It supplies up to 600W of total PoE across its 48 ports — (40) 802.3at PoE+ ports and (8) 802.3bt PoE++ ports for higher-draw devices.
Does this switch support Layer 3 routing?
Yes. It's a fully managed Layer 2 + Layer 3 switch with inter-VLAN routing, static routing, and a built-in DHCP server.
What do I need to manage it?
The UniFi Network application (version 5.10.5 or later), running on a UniFi gateway, Dream Machine, or Cloud Key. Configure and monitor from the web or mobile app anywhere.
Can I add power redundancy?
Yes. The USP RPS DC input lets you connect a UniFi SmartPower Redundant Power System to keep the switch running through a power-supply fault.
What are the 10G SFP+ ports for?
The four 10G SFP+ ports are high-bandwidth uplinks — ideal for aggregating to the core, linking switches, or connecting to a UniFi NVR or server.
Is the USW-Pro-48-PoE NDAA compliant?
Yes. Ubiquiti is a US-based manufacturer and this switch is NDAA Section 889 compliant — suitable for government and security-sensitive sites.
Fast AU Shipping
Genuine Ubiquiti Stock
Expert AU Support
Read
more
less
