UniFi SmartPower Cable, 1.5MFeatures: Supported UniFi SmartPower Connect Toolless Plug-and-Play design

Read more less

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 5m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Read more less

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 5m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Read more less

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 3m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Read more less

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 2m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Read more less

Ubiquiti SFP to RJ45 Transceiver Module, 1000Base-T Copper SFP Transceiver, 1Gbps Throughput Rate, Supports Up to 100m

Read more less

Single-Mode LC Fiber CableBuild your outdoor fiber network using our FiberCable.Lightweight and flexible, FiberCable is ideal for towerdeployments of our outdoor routing and switchingproducts, such as EdgePoint. Available in 100, 200, and300 ft lengths.• Outdoor-Rated Jacket with Ripcord• Integrated Weatherproof Tape• Kevlar Yarn for Added Tensile Strength• Outer Diameter of Cable: 6.0 ± 0.2 mm• Six-Strand Single-Mode (G.657.A2)• Outer Diameter of Fiber Strand: 0.25 mm Nominal• Insertion Loss• 1310 nm: ≤0.5 dB/km• 1550 nm: ≤0.5 dB/km

Read more less

Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts

Read more less

UniFi Access NFC Cards (UA-Card) provide secure, contactless door access for the UniFi Access system. Designed for reliability and enterprise deployments, these cards are available as a Single card, 10-Pack, or 100-Pack, making them ideal for offices, multi-tenant buildings, schools, and commercial facilities. Secure NFC Credentials for UniFi Access The UniFi Access Card (UA-Card) is an encrypted NFC credential designed to work seamlessly with the UbiquitiUniFi Access ecosystem. These cards allow users to unlock doors quickly and securely by tapping a compatible UniFi Access Reader. Built for daily use, UniFi Access Cards offer a simple, cost-effective way to manage physical access without relying solely on mobile phones or PIN codes. Ideal for Small to Enterprise Deployments Whether you’re onboarding a handful of staff or issuing credentials across a large organisation, UniFi Access Cards scale easily: 10-Pack – small offices or departments 100-Pack – large teams, campuses, and multi-site rollouts Cards can be assigned, revoked, or reissued instantly through the UniFi Access management interface. Easy Management, No Licence Fees UniFi Access Cards are provisioned and managed centrally via the UniFi Access application. Lost cards can be disabled immediately, maintaining security without rekeying locks. As with all UniFi Access hardware, no ongoing licence or subscription fees apply. Key Features & Benefits Official UniFi Access NFC credential Secure encrypted NFC technology Fast tap-to-unlock operation Durable PVC card for everyday use Centralised user assignment & revocation No subscriptions or licence fees Ideal backup or primary access method Available as 10-Pack, or 100-Pack Technical Specifications Specification Details Product Name UniFi Access NFC Card (UA-Card) Technology NFC (contactless) Encryption Secure encrypted credential Compatibility UniFi Access Readers Management UniFi Access application Material Durable PVC card Form Factor Standard credit-card size Pack Sizes Single, 10-Pack, 100-Pack More Information UniFi Access NFC Cards Installation Guide

Read more less

Ubiquiti Networks continues to disrupt the wireless broadband market with revolutionary LTU technology that breaks through the limitations of 802.11 Wi-Fi technology.Designed for use in the 5 GHz frequency band, the new airFiber AF-5XHD is Ubiquiti's first LTU radio, offering greater channel bandwidths of up to 100 MHz, and more advanced RF components.Pair the AF-5XHD with a compatible Ubiquiti® airFiber X antenna or RocketDish™ antenna for a complete 5 GHz Point-to-Point (PtP) solution.The AF-5XHD offers the following advanced features:• Programmable Transmit Power The radio's transmit power level can be programmed up to +29 dBm.• Programmable Duty Cycle (GPS synchronized frames) The AF-5XHD allows configuration of asymmetric TX and RX duty cycles. TX ratios include 25%, 33%, 50%, 66.7%, and 75%.• Configurable GPS Synchronization The AF-5XHD offers configurable support for 2, 2.5, 4, and 5 ms frames. Timing is compatible with all other synchronous systems.• Split TX and RX Frequency1 The radio can operate on different frequencies for TX and RX, allowing great flexibility for interference avoidance.• Split TX and RX Channel Bandwidth1 Support for different channel bandwidths for TX and RX allows users to scale required data capacity more efficiently.• Adaptive Modulation up to 1024QAM Adaptive modulation rates of up to 1024QAM (4096QAM with targeted upgrade) are supported.• Dual Redundant Gigabit Ethernet Ports with PoE The AF-5XHD has two Gigabit Ethernet ports that can be used to provide redundant PoE power.• OFDM and OFDMA Support1 The radio offers flexible scheduling for 2, 4, or 8 subchannels.• Bluetooth Wireless Configuration Use the built-in Bluetooth interface for wireless configuration.• AlignLock™ Antenna Aiming Guard This alerts the user when the radio or antenna aiming is changed due to tampering, impact, or storm damage.• User-Configurable Interference Mitigation Three user-selectable profiles

Read more less

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length 1m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Read more less

Ubiquiti U Fiber Single-Mode Module 10G 2-packSupported Media:Single-Mode FiberConnector Type:2x LCTX Wavelength:1310 nmRX Wavelength:1310 nmData Rate:10 Gbps SFP+Cable Distance:10 km

Read more less

Ubiquiti U Fiber Multi-Mode Module 1G 2-packSupported Media:Multi-Mode FiberConnector Type:2x LCTX Wavelength:850 nmRX Wavelength:850 nmData Rate:1 Gbps SFPCable Distance:300m

Read more less

UniFi Protect — Enterprise Rack NVR UniFi Protect UNVR Pro — 7-Bay Enterprise Rack NVR with RAID & 10G SFP+ The UniFi Protect UNVR Pro is the flagship enterprise NVR in the UniFi Protect lineup — a 2U rack-mount powerhouse with seven 2.5″/3.5″ HDD/SSD bays, flexible RAID 1/5/10 data protection, a 10G SFP+ uplink, and a built-in 1.3″ touchscreen for local management. Supporting up to 20 × 4K cameras or 60 × Full HD cameras with up to 60 days of retention, the UNVR Pro is built for commercial buildings, campuses, enterprise sites, and any large-scale UniFi Protect deployment across Australia. Max Cameras 20 × 4K HDD Bays 7 × 2.5″/3.5″ Uplink 10G SFP+ RAID 1 / 5 / 10 Why Choose the UniFi Protect UNVR Pro? 7 × HDD/SSD Bays — Up to 60 Days Retention Install up to seven 2.5″ or 3.5″ SATA drives for massive local storage capacity — enough for up to 60 days of continuous footage from 20 × 4K cameras or 60 × Full HD cameras. RAID 1 / 5 / 10 Data Protection Flexible RAID configurations protect your recordings against drive failure — RAID 1 for mirroring, RAID 5 for capacity-efficient redundancy, or RAID 10 for maximum performance and protection. 10G SFP+ Uplink A 10-Gigabit SFP+ port handles the full bandwidth of 20 simultaneous 4K camera streams — essential for large enterprise deployments with high-resolution cameras. 1.3″ Built-in Touchscreen Monitor system status, storage health, and network information directly on the unit via the built-in touchscreen — no PC or app required for on-site diagnostics. Gigabit RJ45 Uplink An additional Gigabit RJ45 port provides flexible connectivity for standard network infrastructure alongside the 10G SFP+ port. Power Redundancy — USP-RPS Compatible Connect the optional Ubiquiti USP-RPS Power Backup for enhanced power redundancy — keeping your surveillance system running during power outages or PSU failure. UniFi Protect Pre-Installed Ships with UniFi Protect pre-installed and ready to adopt cameras immediately — no separate software licence, no subscription, no cloud dependency. 2U Rack-Mount Steel Chassis The rugged 2U steel rack-mount chassis integrates into server rooms, comms cabinets, and data centres for 24/7 professional operation. Ideal Use Cases 🏭 Large Commercial & Enterprise Sites Factories, warehouses, logistics hubs, and large commercial properties needing enterprise-grade recording capacity with RAID redundancy. 🏫 Schools, Universities & Campuses Multi-building campuses where long retention periods, high camera counts, and reliable RAID storage are non-negotiable. 🏢 Office Towers & Strata Complexes High-rise office buildings, strata complexes, and commercial towers with server room infrastructure and large camera deployments. 📹 Maximum-Scale UniFi Protect Systems The UNVR Pro is the top-tier NVR for any UniFi Protect deployment requiring maximum storage, RAID protection, and enterprise uplink speeds. Technical Specifications Model UNVR-Pro Form Factor 2U Rack-mount HDD/SSD Bays 7 × 2.5″/3.5″ SATA (drives not included) RAID Support RAID 1 / 5 / 10 Max Cameras 20 × 4K / 60 × Full HD Max Retention Up to 60 days (configuration dependent) Uplink Ports 1 × 10G SFP+ • 1 × Gigabit RJ45 Display 1.3″ built-in touchscreen Power Redundancy USP-RPS compatible (sold separately) Management UniFi Protect (pre-installed, no subscription) Remote Access UniFi Protect app (iOS/Android) • Web UI Enclosure Steel rack-mount chassis What’s in the Box 📦 UNVR Pro Unit 7-bay 2U rack-mount NVR with UniFi Protect pre-installed. 🔧 Rack Mount Hardware Rack-mount brackets, screws, and power cord included. 📖 Quick-Start Guide Installation guide and documentation included. ⚠️ Not Included HDDs/SSDs, cameras, and USP-RPS power backup are sold separately. Frequently Asked Questions Does the UNVR Pro require a UniFi Protect subscription? No. UniFi Protect comes pre-installed and runs fully locally. There are no monthly fees, no cloud subscription, and no data leaving your premises. What hard drives are compatible? Any compatible 2.5″ or 3.5″ SATA HDD or SSD. Ubiquiti recommends surveillance-grade drives (e.g. WD Purple Pro or Seagate SkyHawk AI). Check Ubiquiti’s HDD compatibility list before purchasing. What RAID modes are supported? RAID 1 (mirroring), RAID 5 (distributed parity), and RAID 10 (striped mirrors) are all supported — configurable through the UniFi Protect interface. What is the difference between the UNVR and UNVR Pro? The UNVR has 4 HDD bays and supports up to 15 × 4K cameras. The UNVR Pro has 7 HDD/SSD bays, RAID 1/5/10, a 1.3″ touchscreen, and supports up to 20 × 4K or 60 × HD cameras — designed for the most demanding enterprise deployments. Does it support power redundancy? Yes. The UNVR Pro is compatible with the Ubiquiti USP-RPS Power Backup unit for enhanced power redundancy — keeping your system running during power outages or PSU failure. Can I view cameras remotely? Yes. The UniFi Protect app supports remote viewing via the UniFi cloud relay — no port forwarding required. Remote access is free with a UniFi account. Downloads & Resources Datasheet Installation Guide Fast AU Shipping Genuine Ubiquiti Stock Expert AU Support

Read more less

Ubiquiti UFiber Gigabit Passive Optical Network Splitter 1:8For use with UFiber OLT solutions

Read more less

Ubiquiti airMAX Sector Antenna AM-5G20-90, Advanced RF Isolation Antenna Advanced Carrier-Class PtMP Basestation Antenna. Introducing the Ubiquiti airMAX Sector AM-5G20-90, which continues the evolution of Ubiquiti

Read more less

Ubiquiti has you covered with the next generation of 2x2 MIMO sector antennas from Ubiquiti Networks, the airMAX® AM-5AC21-60 ac Sector Antennas, feature significant advances in scalability, noise isolation, and beam performance to complement the Rocket™5ac radios. They are also compatible with RocketM5 models; however, optimal performance requires the Rocket5ac. Breakthrough Performance the airMAX AM-5AC21-60,ac Sector Antennas are highly resistant to noise interference in co-location deployments. The innovative deflector design, together with the reduced sidelobes and backlobes, reject interference from other transmitters in the area – potentially on the same tower. Improved Signal-to-Noise Ratio (S/N or SNR) allows a higher-order modulation to be used, for example, 256QAM rather than 16QAM. This increases the number of bits per second for a fixed bandwidth (or data rate). Due to innovative design, the Ubiquiti airMAX ac Sector Antennas provide higher gain and superior beam performance for high-capacity, multipoint networks.

Read more less

Ubiquiti airMAX Sector Antenna AM-2G15-120, Advanced RF Isolation Antenna Advanced Carrier-Class PtMP Basestation Antenna. Introducing the Ubiquiti airMAX Sector AM-2G15-120, which continues the evolution of Ubiquiti

Read more less

*NEW* FiberPOE, G2

Read more less

Ubiquiti U Fiber Single-Mode Module 1G BiDi 20 packSupported Media:Single-Mode FiberConnector Type:1x LCTX Wavelength:1310 nm Blue 1550nm YellowRX Wavelength:1550 nm Blue 1310nm YellowData Rate:1.25 Gbps SFP+Cable Distance:3 km

Read more less

Ubiquiti AM-5G17-90 airMAX 2x2 MIMO Antennas 5GHz AirMax 2x2 MIMO Basestation Sector Antennas Revolutionary, Cost/Performance Breakthrough Carrier Class MIMO BaseStato n Antennas

Read more less

UniFi Protect Smart Floodlight The UP-Floodlight is a high-performance, motion-activated LED floodlight designed for the UniFi Protect ecosystem. Powered by PoE, it delivers 550 lumens of intense light to enhance night-time surveillance and provide security lighting for residential and commercial spaces. Product Hardware Features High-Intensity Lighting: Delivers 550 Lumens of bright LED light for superior visibility. Integrated PIR Sensor: Features a Passive Infrared (PIR) motion sensor with a detection range of up to 5 meters (16 feet). PoE Powered: Simplified installation with a single Ethernet cable for both data and power (802.3af PoE). Smart Integration: Automatically triggers via motion detection or can be manually managed through the UniFi Protect application. Weatherproof Design: IPX5-rated housing provides protection against water and environmental elements, suitable for outdoor deployment. Technical Specifications Brightness 550 Lumens Color Temperature 5000K (Cool White) Networking Interface 10/100 MbE RJ45 Port Power Method 802.3af PoE IP Rating IPX5 Weatherproof Dimensions 135 x 100 x 43 mm (5.3 x 3.9 x 1.7") More Information For detailed installation steps and hardware requirements, download the official guide below: Download Installation Guide Requirement: Must be managed with the UniFi Protect application and connected to a UniFi PoE switch.  

Read more less

Ubiquiti UFiber Gigabit Passive Optical Network Splitter 1:32For use with UFiber OLT solutions

Read more less

The Ubiquiti RocketDish RD-5G31-AC is a Carrier Class 2x2 Bridge Dish Antenna that was designed to seamlessly integrate with RocketM radios (RocketM sold separately).  Pair the RocketM’s radio with the RocketDish antenna’s reach to create the endpoint of a high-performance, Point-to-Point (PtP) backhaul. On the right is one example of how the RocketDish can be deployed. Superior PerformanceThe Ubiquiti Research and Development team engineered the RocketDish RD-5G31-AC with high isolation and Front-to-Back (F/B) ratio. The main benefit is improved Signal-to-Noise Ratio (S/N or SNR). The improved F/B ratio and lower sidelobes reduce the interference from other transmitters in the area – potentially on the same tower. The improved S/N ratio allows a higher-order modulation to be used, for example, 128QAM rather than 16QAM. This in turn increases the number of bits per second for a fixed bandwidth, which is also known as the data rate. Because of its advanced engineering, the RocketDish RD-5G31-AC provides:• Enhanced co-location• Better performance• Additional rangeInnovative Mechanical Design• Ruggedized mounting The mounting bracket is designed to securely mount and maintain the position of the dish during harsh outdoor conditions.• Reduced weight The dish and mounting brackets are made of lightweight aluminum.• Convenient installation The bubble level allows for easy alignment.Weatherproof Design• Radome and shroud The included radome protects the inner components, while the metal shroud protects the cables and connectors from nature’s harshest elements.• Dish, mounting brackets, and fasteners For superior corrosion resistance, the dish and mounting brackets are power-coated, and the fasteners are made of stainless steel.

Read more less

Ubiquiti UniFi Ethernet Cable, Category 6 UTP (Unshielded Twisted Pair), Up To 10G Ethernet, 304m, Anti-crosstalk Divider Category 6 Ethernet cable for high-speed, indoor deployments. Category 6 UTP communications multipurpose cable Riser (CMR)-rated, fire-resistant jacket Anti-crosstalk divider Cable length 305 m Technical Specifications Mechanical Box dimensions 474 x 346 x 458 mm (18.7 x 13.6 x 18") Box weight 14.8 kg (32.7 lb) Cable length 305 m (1000 ft) Cable color White Cable type Category 6 Shielding type UTP Flame rating CMR Conductor wire gauge 23 AWG Conductor type Solid bare copper Jacket material PVC Jacket diameter 6.0 ± 0.2 mm Bend radius Min. 24 mm Pulling tension Max. 110 N Storage temperature -20 to 75°C (-4 to 167°F) Installation temperature 0 to 60°C (32 to 140°F) Ambient operating temperature -20 to 60°C (-4 to 140°F) Anti-crosstalk divider Yes Ripcord Yes Data rate 10/100/1000 Base-T Reference bandwith Up to 600 MHz Standards Electrical transmission:ANSI/TIA-568-C.2 (2009)ISO/IEC 11801 (Edition 2.2)IEC 61156-5 (Edition 2.1)Flame test: UL 1666 (CMR)Material and construction:UL 444CSA 22.2 NO.214EU Directive 2011/65/EU (RoHS2)EU Directive 2006/95/EC (LVD)

Read more less

Ubiquiti 5GHz PrismAP Antenna 30 degree

Read more less